Search Results

Search found 7799 results on 312 pages for 'changing'.

Page 220/312 | < Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >

  • vagrant and puppet security for ssl certificates

    - by Sirex
    I'm pretty new to vagrant, would someone who knows more about it (and puppet) be able to explain how vagrant deals with the ssl certs needed when making vagrant testing machines that are processing the same node definition as the real production machines ? I run puppet in master / client mode, and I wish to spin up a vagrant version of my puppet production nodes, primarily to test new puppet code against. If my production machine is, say, sql.domain.com I spin up a vagrant machine of, say, sql.vagrant.domain.com. In the vagrant file I then use the puppet_server provisioner, and give a puppet.puppet_node entry of “sql.domain.com” to it gets the same puppet node definition. On the puppet server I use a regex of something like /*.sql.domain.com/ on that node entry so that both the vagrant machine and the real one get that node entry on the puppet server. Finally, I enable auto-signing for *.vagrant.domain.com in puppet's autosign.conf, so the vagrant machine gets signed. So far, so good... However: If one machine on my network gets rooted, say, unimportant.domain.com, what's to stop the attacker changing the hostname on that machine to sql.vagrant.domain.com, deleting the old puppet ssl cert off of it and then re-run puppet with a given node name of sql.domain.com ? The new ssl cert would be autosigned by puppet, match the node name regex, and then this hacked node would get all the juicy information intended for the sql machine ?! One solution I can think of is to avoid autosigning, and put the known puppet ssl cert for the real production machine into the vagrant shared directory, and then have a vagrant ssh job move it into place. The downside of this is I end up with all my ssl certs for each production machine sitting in one git repo (my vagrant repo) and thereby on each developer's machine – which may or may not be an issue, but it dosen't sound like the right way of doing this. tl;dr: How do other people deal with vagrant & puppet ssl certificates for development or testing clones of production machines ?

    Read the article

  • Embedding a WMV file on the web via URL in a Powerpoint presentation

    - by Dave
    I've got a situation where I want to distribute a Powerpoint presentation to several people. I want to be able to embed several large videos in this presentation by linking to a URL, for the following specific reasons: the videos are highly confidential, and I would like to be able to delete them at some later date, but still allow them to see it in the presentation while it is online. I want to send the presentation via email (so it should be small), and put the links on a server with a faster upload speed Maybe I'd like to change the video at some point without changing the presentation One option that addresses #1 is to hook up a webcam and allow them to see video stream from the office, but our upload rate is too slow for this to be a viable option. I've tried embedding a video and giving Powerpoint the URL. It seems to work initially, because the first frame appears in my slideshow. However, when I play the slideshow, nothing happens. I looked at the network traffic on my computer, and nothing was getting downloaded from the remote server. Any suggestions on how to make this work, or how to at least satisfy the criteria listed above would be great!

    Read the article

  • windows 7 64 bit visual studio 2008 libtiff build nmake error

    - by user1244539
    I am trying to build tiff 4.0.2 on my Windows 7 x64 system with Visual Studio 2008, but it was showing errors: C:\Program Files\Microsoft SDKs\Windows\v6.0A\include\mmsystem.h(2347) : error C2061: syntax error : identifier 'QINT' C:\Program Files\Microsoft SDKs\Windows\v6.0A\include\mmsystem.h(2362) : error C2059: syntax error : '}' C:\Program Files\Microsoft SDKs\Windows\v6.0A\include\mmsystem.h(2397) : error C2061: syntax error : identifier 'JOYCAPS' C:\Program Files\Microsoft SDKs\Windows\v6.0A\include\mmsystem.h(2397) : error C2059: syntax error : ';' C:\Program Files\Microsoft SDKs\Windows\v6.0A\include\mmsystem.h(2398) : error C2061: syntax error : identifier 'PJOYCAPS' C:\Program Files\Microsoft SDKs\Windows\v6.0A\include\mmsystem.h(2398) : error C2059: syntax error : ';' C:\Program Files\Microsoft SDKs\Windows\v6.0A\include\mmsystem.h(2399) : error C2061: syntax error : identifier 'NPJOYCAPS' C:\Program Files\Microsoft SDKs\Windows\v6.0A\include\mmsystem.h(2399) : error C2059: syntax error : ';' C:\Program Files\Microsoft SDKs\Windows\v6.0A\include\mmsystem.h(2400) : error C2061: syntax error : identifier 'LPJOYCAPS' C:\Program Files\Microsoft SDKs\Windows\v6.0A\include\mmsystem.h(2400) : error C2059: syntax error : ';' C:\Program Files\Microsoft SDKs\Windows\v6.0A\include\mmsystem.h(2534) : error C2146: syntax error : missing ')' before identifier 'pjc' C:\Program Files\Microsoft SDKs\Windows\v6.0A\include\mmsystem.h(2534) : error C2081: 'LPJOYCAPSA' : name in formal parameter list illegal C:\Program Files\Microsoft SDKs\Windows\v6.0A\include\mmsystem.h(2534) : error C2061: syntax error : identifier 'pjc' C:\Program Files\Microsoft SDKs\Windows\v6.0A\include\mmsystem.h(2534) : error C2059: syntax error : ';' C:\Program Files\Microsoft SDKs\Windows\v6.0A\include\mmsystem.h(2534) : error C2059: syntax error : ',' C:\Program Files\Microsoft SDKs\Windows\v6.0A\include\mmsystem.h(2534) : error C2059: syntax error : ')' NMAKE: fatal error u1077: "c:\program files(x86)\microsoft visual studio 9.0\vc\bin\cl.exe": return code '0x2' This is what I was doing: Extracted tiff 4.0.2 In VS 2008 x64 Win 7 command prompt setting the environment for x86 by running vcvars32.bat Changing the path to tiff 4.0.2/libtiff folder Running nmake /f makefile.vc to create a static library of libtiff Following these steps in Windows XP generates the .lib file but in Windows 7 it fails. This is the first time I'm making any .lib files.

    Read the article

  • Adding License to VMware Server 2 via scripting command?

    - by andyt25
    Hi all, I recently discovered the vimsvc/license command in vmware-vim-cmd and was trying to use that to automatically add my license key to a fresh vmware installation. vmware-vim-cmd -H hostip -O portnumber vimsvc/license --source file '/path/to/plaintext-file-that-contains-my-license-key.txt' plaintext-file-that-contains-my-license-key.txt contains my key in XXXXX-XXXXX-XXXXX-XXXXX format, I've also tried it with an extra carriage return at the end. Adding the key that way doesn't work, however. I always get the following error message: [200] Reading local file: /path/to/plaintext-file-that-contains-my-license-key.txt [200] Size of file is 24 bytes. returned were XXXXX-XXXXX-XXXXX-XXXXX [200] Changing license source to: file:/path/to/plaintext-file-that-contains-my-license-key.txt [500] Caught unexpected exception Type: N5Vmomi5Fault17NotEnoughLicenses9ExceptionE what() =vmodl.fault.NotEnoughLicenses GetMsg() = There are not enough licenses installed to perform the operation. It's kinda silly to require a license to be able to add a license, don't you think? ;-) So how do I go about and add the key via script? I would like to avoid any interaction as I have the rest of the install fully scripted and non-interactive. Kind Regards, Stefan

    Read the article

  • Nginx try_files or else continue matching against locations?

    - by Yang
    I'm wondering whether this is possible with Nginx: I just added a directory with a bunch of HTML files (foo.html, bar.html) that I'd like to serve with /foo, /bar, etc. If the URL doesn't match up with a file name I'd like to fall back to whatever the next best matching location would be. So I have: # This block is newly added. location ~ ^/([^/]+)$ { default_type text/html; alias /blah/$1.html; } # Our long list of existing subsystems below.... location /subscribe { proxy_pass http://127.0.0.1:5000; } location /upload { proxy_pass http://127.0.0.1:8090; proxy_read_timeout 99999; } location ~ /(data|garbage|blargh).* { proxy_pass http://127.0.0.1:8090; proxy_read_timeout 99999; auth_basic text; auth_basic_user_file /etc/nginx/htpasswd; } .... The problem is that the first regex now eats up the URLs that would've gone to other locations, as per the documented behavior of location. One approach is to maintain the full explicit list of files in the first location block, but this list is quite large and is always changing. Is there a way to check to see if the file exists first, and if not, then continue with what would've been the next-best location match? I took stabs using try_files (including using a @fallback and nesting locations in there) but I don't think it's capable of doing this. However I thought I'd ask here in case I'm missing something. (Or maybe there's another better approach altogether.)

    Read the article

  • Mysql can not resolve hostnames when checking privileges

    - by Fabio
    I'm going crazy to solve this. I have a mysql installation (on machine db.example.org) which doesn't resolve a given hostname. I gave privileges using hostnames i.e. GRANT USAGE ON *.* TO 'user'@'host1.example.org' IDENTIFIED BY PASSWORD 'secret' GRANT SELECT, INSERT, UPDATE, DELETE, CREATE, INDEX ON `my_database`.* TO 'user'@'host1.example.org' However when I try to connect using mysql -u user -p -h db.example.org I obtain ERROR 1045 (28000): Access denied for user 'user'@'192.168.11.244' (using password: YES) I already checked for correct name resolution in the dns system: $ dig -x 192.168.11.244 ;; ANSWER SECTION: 244.11.168.192.in-addr.arpa. 68900 IN PTR host1.example.org. I've also checked for skip-name-resolve option in mysql variables in fact if I can access from another machine on the same subnet using hostname privileges. The only difference is that host1.example.org and db.example.org point the same ip on the same machine i.e. both db.example.org and host1.example.org have ip 192.168.11.244. In this way all the applications using that database can use the name db.example.org and we can move the data on other hosts (if needed) just by changing the dns record, leaving the application code unchanged. What should I do to solve this or at least to understand what's happening?

    Read the article

  • Mac Share Points automatically authenticate with matching Windows AD credentials from Windows

    - by Ron L
    I recently started administering an OS X server (10.8) that is on the same network as our AD domain. While setting up Mac Share Points, I encountered some odd behavior that I hope someone can explain. For the purposes of this example assume the following: 1) Local User on OS X Server: frank, password: Help.2012 2) AD Domain User: frank, password: Help.2012 3) AD Domain: mycompany 4) OS X Server hostname: macserver (not bound to AD, not running OD) When joined to the domain on a a Win 7 computer and logged in as frank and accessing the shares at \\macserver, it automatically authenticates using frank's OS X credentials (because they are the same). However, if I change frank's OS X password, the standard Windows authentication dialog pops-up preset to use frank's AD domain (my company\frank). However, after entering the new OS X password, it will not authenticate without changing the domain to local (.\frank). Basically, if a user in AD has the same User name and password in OS X, it will authenticate automatically regardless of the domain. If the passwords differ, authenticating to the OS X shares must be done from the local machine. (and slightly off topic - how come an OS X administrator can access the root drives on the Mac server from Windows when accessing the Mac shares even when they aren't shared? In other words, it will show all the shared folders from "File Sharing" plus whatever drives are mounted in OS X)

    Read the article

  • Python coding with VLC player (quite a basic query I expect)

    - by Todd
    I'm fairly new to the whole coding realm so my knowledge is fairly limited, and I can't seem to find any basic tutorials on how to use scripts with VLC player. More specifically, the reason I'm asking here is because I stumbled across a post on this site about playing random clips from random videos on VLC player automatically. This is the forum post: Playback random section from multiple videos changing every 5 minutes My situation is similar to this lovely gentleman's was, though he clearly knows a lot more about coding than I do. In short, I'd like to copy this coding into a file of some sort and apply it to VLC player myself. Only I'm not sure what file type I'd have to save it as (I have Python by the way, and I tried saving it as a .py file but I didn't know if it was correct or where to go from there). Additionally, I'm not sure how to get VLC to "read" the script, so to speak - is there a specific location the file needs to be, and do I run the script from another program or through VLC? I'll reiterate that I'm relatively new to this, so if anybody would be so kind as to post a quick list of steps on how to save/place the file and use it with VLC player I really would appreciate it! P.S. I'm not computer illiterate, I'm fine with most programs and I'd understand if you just said things like "C:\Program Files (x86)\VideoLAN\VLC\plugins" or "in VLC, select Tools Plugins and extensions", I just wouldn't catch on to anything about adding a line of coding that does something without being told exactly what to write! Many thanks in advance! :) Todd

    Read the article

  • Setting up a localhost mail server on Mac OSX

    - by Thom
    I asked this over on stackoverflow. They pointed me here. I would love to be able to test php webapps that require emailing registration info etc. on my mac. I downloaded a version of CommuniGate Pro. I need to mail either to an account inside or outside (whichever is best) of the localhost. Again this would be used for testing purposes to verify and debug my code prior to uploading to a hosting service. Any ideas, help and/or examples would be very much appreciated. If it would be easier I could go over to Windows XP. That would just mean setting up wamp and transfering my files over from the mac side via dropbox. I got the local mailserver to work so I can send emails between accounts. However, I cannot seem to get the php code to work. I know that I am missing something. I see where this has been asked before. I want to add that I am using xampp. In Mac OS 10.6.8. I tried changing the php.ini SMTP command to macintosh-3.local. <?php function email($to, $subject, $body, $headers) { $headers = 'MIME-Version: 1.0' . "\r\n"; $headers .= 'From: <[email protected]>' . "\r\n"; mail($to, $subject, $body, $headers); } ?>

    Read the article

  • how to remove an entry from system tray?

    - by altvali
    I've searched for an answer to this one and I haven't found one yet. How do i remove a single item from Windows' System tray? I'm targeting Windows XP. Edit: This is not about preventing items from starting up. I want the program to keep running, I just need another script/program to remove the first one's entry from system tray. Second Edit: One approach that I can think of is to try to hide the intended app by modifying registry keys. On several test machines I've found some registry entries that match the System tray information at HKEY_USERS\something-that-looks-like S-1-5-21-682003330-1563985344-725345543-1003\Software\Microsoft\Windows\CurrentVersion\Explorer\TrayNotify with BalloonTip, IconStream and PastIconsStream containing systray information. The important one is IconStream. On other machines, these are found at hkey_classes_root/local/setting/software/microsoft/windows/currentversion/TrayNotify I'm quite sure there's no danger in changing those specific registries, but I don't know how to write code for that. Can anyone help me with the code and with confirming if this has the desired effect of hiding the systray icon for an active program?

    Read the article

  • Intermittent CNAME forwarding

    - by Godric Seer
    I host a personal website on an old desktop that is LAMP based. Since I have a dynamic IP, I use no-ip to make sure I have a working domain name at all times. I also have a domain I have bought on GoDaddy where I have a CNAME record forwarding the www subdomain to my no-ip domain. At all times, I can connect to my website through the no-ip domain without issue. For the past several weeks, I never had an issue using the GoDaddy domain to connect (ssh or https). As of today, however, the GoDaddy domain only works for about 10 minutes at a time. I get server not found errors most of the time. Also, if I happen to be using the GoDaddy domain for an ssh connection, the connection will freeze. I have attempted to run tests using a couple of online DNS check websites, but have not gotten any errors at any time. I also contacted GoDaddy support but they had no issues connecting to the website, and therefore did not see any issues. I would like advice on how I could debug/resolve this issue. Since the problem appeared without me changing anything on my end, I hope it will resolve itself, but knowing the cause in case it happens again would be preferable. EDIT: I changed the configuration in GoDaddy to create an A (Host) that points at my current IP. This works fine, so I can access the site through the GoDaddy domain without the preceding www. I am currently waiting for a new CNAME record to propagate that points the www subdomain at the main host, rather than my no-ip domain.

    Read the article

  • EC2: How dangerous is it to turn off fsck for EBS volumes?

    - by Janine
    I have been tearing my hair out trying to figure out why my EC2 instances (made from my own custom AMIs) were taking many tries to come up properly. They would fail with the following error: fsck.ext3: No such file or directory while trying to open /dev/sdf For both of the EBS volumes I was attaching during startup. Finally, I figured out the problem. I had put this in /etc/fstab: /dev/sdf /export ext3 defaults 1 2 /dev/sdi /export2 ext3 defaults 1 2 The 2 tells the system to fsck the drives on the way up. Changing this to /dev/sdf /export ext3 defaults 1 0 /dev/sdi /export2 ext3 defaults 1 0 Avoids the problem completely, but now the volumes are never going to be fsck'd. How much does this matter? Once the instance goes into production it's going to be running pretty much 24/7, so not many fscks would be happening anyway, but still... this just feels like a bad idea. I have not been able to find anyone else even reporting this problem (there are people with the same error message, but different causes). It seems unbelievable that I could be the only person to ever make this mistake, but perhaps I'm just talented that way. :) If there is another solution to the problem I would love to hear it; I have not been able to find one.

    Read the article

  • vmware vcenter 5.1 installation with FQDN error

    - by CSG
    I'm trying to install vCenter 5.1 on a windows 2012 dedicated (with SQL express standalone) During the installation of the Single Sign On module i've a warning "the fully qualified domain name cannot be resolved with nslookup. if you continue the installation some features might not work correctly. for detailed requiments see the installation and setup guide" The only indication that i've found are about the reverse zone dns resolution.. and this works! i've verified that the dns works properly with nslookup C:\Users\admin>nslookup srv6.mydomain.local Server: srv2.mydomain.local Address: 172.25.4.22 Nome: srv6.mydomain.local Address: 172.25.1.26 C:\Users\admin>nslookup 172.25.1.26 Server: srv2.mydomain.local Address: 172.25.4.22 Nome: srv6.mydomain.local Address: 172.25.1.26 (all ip are right: I've the vCenter=srv6 and DC+DNS=srv2 on different vlan) i've tryed to force the resolution of the ip changing the [..]\drivers\etc\hosts file i've disabled the IPv6 support i've used all combination with domain prefixes (explicit, by dhcp, undefined..) i've disabled all antivirus/firewall (kaspersky end point 10) is this a bug of vcenter 5.1.0-1065152 ? have you got any suggestions for me?

    Read the article

  • How to eliminate the downtime when a dynamic IP address changes?

    - by xenon
    We currently have a number of client computers linked up to a database server (MS SQL 2008) for replication. The database server recognises the computers based on their Windows hostname. We are using dynamic IP addresses at this time because we tend to change the computers’ hardware quite frequently, and so the MAC address may be different. Unless static IP has a good way for us to manage frequent changing of MAC addresses, we are keeping it to dynamic IP. The problem with dynamic IP addresses, however, is that when a client fetches an new IP from the DHCP, ie, there is a change in the IP address, there is going to have a downtime for the hostname to reflect the new IP address, the client’s DNS cache of the hostname to reload, and also the server’s DNS cache to reload to see the new IP from the hostname. All of these have different timings and the delay can be really bad at times. Restarting the computer doesn't work all the time too. The clients are on Windows 7. How can I eliminate the amount of downtime required when there is a change in IP in the case of dynamic IP addresses?

    Read the article

  • error creating MS Exchange distribution list: Active directory response: 00000005: SecErr: DSID-031521D0

    - by BabakBani
    We've migrated a client from google apps to an MS Exchange 2010 SP2 on-premise setup. The setup /prepareAD went well, and the software was installed with the Administrator account. We've used the Exchange Management Console to setup mailboxes and had to google up the appropriate workarounds such as going into each users Advanced Security Settings and selecting "include inheritable permissions from this object's parents", and changing their logon-to from specific machines to "all computers" so that they can connect to Outlook Web Access, and in turn so their Outlook 2007-2010 clients can connect to Exchange. Sending and receiving emails are working well. Now that all this is in place, we can create Dynamic Distrubution Lists with no problem, but as soon as we try and create a DISTRIBUTION LIST, either in the EMC or the Exchange PowerShell, we get an error. As the error message in the powershell is more verbose, I include this if anyone can suggest how we remedy this: [PS] C:\Windows\system32new-DistributionGroup -Name 'projects' -SamAccountName 'projects' -Alias 'projects' Active Directory operation failed on DC.cppe.local. This error is not retriable. Additional information: Access is denied. Active directory response: 00000005: SecErr: DSID-031521D0, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0 + CategoryInfo : NotSpecified: (0:Int32) [New-DistributionGroup], ADOperationException + FullyQualifiedErrorId : 1EA5CD3E,Microsoft.Exchange.Management.RecipientTasks.NewDistributionGroup

    Read the article

  • How to Change the Kerberos Default Ticket Lifetime

    - by user40497
    Our KDC servers are running either Ubuntu Dapper (2.6.15-28) or Hardy (2.6.24-19). The Kerberos software is the MIT implementation of Kerberos 5. By default, a Kerberos ticket lasts for 10 hours. However, we'd like to increase it a bit (e.g. 14 hours) to suit our needs better. I had done the following but the ticket lifetime still stays at 10 hours: 1) On all the KDC servers, set the following parameter under [realms] in /etc/krb5kdc/kdc.conf and restarted the KDC daemon: max_life = 14h 0m 0s 2) Via "kadmin", changed the "maxlife" for a test principal via "modprinc -maxlife 14hours ". "getprinc " shows that the maximum ticket life is indeed 14 hours: Maximum ticket life: 0 days 14:00:00 3) On a Kerberos client machine, set the following parameters under [libdefaults], [realms], [domain_realm], and [login] in /etc/krb5.conf (everywhere basically since nothing I tried had worked): ticket_lifetime = 13hrs default_lifetime = 13hrs With the above settings, I suppose that the ticket lifetime would be capped at 13 hours. When I do "k5start -l 14h -t ", I see that the end time for the "renew until" line is now 14 hours from the starting time: Valid starting Expires Service principal 04/13/10 16:42:05 04/14/10 02:42:05 krbtgt/@ renew until 04/14/10 06:42:03 "-l 13h" would make the end time in the "renew until" line 13 hours after the starting time. However, the ticket still expires in 10 hours (04/13 16:42:05 - 014/14 02:42:05). Am I not changing the right configuration file(s)/parameter(s), not specifying the right option when obtaining a Kerberos ticket, or something else? Any feedback is greatly appreciated! Thank you!

    Read the article

  • cygwin sshd fails to allocate pty for some users

    - by user115851
    I have (finally) got sshd working under cygwin on Win7 - well, sort of. The sshd runs as user 'cyg_server'. I'm able to successfully ssh to my computer using that same user name. However, if I attempt to ssh using my normal (Windows) user name, it fails trying to allocate a pty for my login session. For example, output of 'sshd -D -d -d -d' contains this .. ... debug1: Entering interactive session for SSH2. debug2: fd 4 setting O_NONBLOCK debug2: fd 5 setting O_NONBLOCK debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 1048576 max 16384 debug1: input_session_request debug1: channel 0: new [server-session] debug2: session_new: allocate (allocated 0 max 10) debug3: session_unused: session id 0 unused debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request pty-req reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_pty_req: session 0 alloc /dev/pty1 !!! chown(/dev/pty1, 17308, 10513) failed: Invalid argument debug1: do_cleanup debug1: session_pty_cleanup: session 0 release /dev/pty1 Currently /dev is owned by my normal account. I've tried changing its ownership to cyg_server as well as SYSTEM. In both cases the problem persists. I've also changed permissions for /dev (e.g, 700 and 777) - again problem persists. [As a side note - it is strange that whenever I do 'ls -al /dev' the ptys do not show up. However, if I 'ls -l /dev/ptyX' for a pty I know to exist, it shows up. Is that normal for cygwin?] -Bob Andover, MA

    Read the article

  • Share Point ACL on OSX Lion Server - Posix group always takes over ACLs

    - by Ben
    Trying to configure a share point on a Lion Server machine. The directory is created by the local server admin (serveradmin) and has rwxr-x--- given to it. The serveradmin user belongs to the local staff group so serveradmin readwrite staff group read Others none We have an OD group for all the employees (Workers) . Using the Server tool we've given Full Control to the share point: Workers Full Control serveradmin readwrite staff group read Others none We would assume that Workers could then do what they want on the share but that doesn't seem to be the case. It appears the POSIX permissions take over the ACL permissions for Worker. If I change the staff permission to readwrite then the Workers can create a file or folder in the share point. I would think the ACL should take over but it doesn't, posix always win, rendering ACL useless. Furthermore if I leave the readwrite permission for staff and take Write permission away for the Workers group then the posix group still wins. Essentially the Workers ACL does absolutely nothing. There are reports of similar problems in this Apple forum thread: https://discussions.apple.com/thread/3722901 The directory nesting fix suggested there doesn't work for us. Has anyone had similar issues and know how to fix this? Edit: in Workgroup Manager the employees user are set to primary group staff and given the additional OD group Workers. Changing their primary group doesn't help, it only shifts the problem onto Others taking over rights (logically) Edit 2: Ok, this is interesting, adding OD Users to the share's ACL works totally fine

    Read the article

  • Running DNS locally for home network

    - by Roy Rico
    I have a small home network that just got larger ( New roommate, My existing roommate got a laptop (on top of her computer)j, my friends coming over with laptop, etc ). I'd like to run a local DNS server for lookups of my local network stuff (fileserver.local, windowsTV.local, machineA.local, machineB.local, appletv.local). I used to have a business line with a static IP, and run bind/named internally. However, now, I have a normal account. My ISP's DNS servers are constantly changing (for whatever reasons my ISP doesn't like to keep the same IP range for long). I need my local DNS to be automatically updated to use my ISP's DNS for external traffic, but be able to maintain an internal DNS server (getting to update the hosts file is being a hassle with every new machine on top of rebuilding existing machines with win7 or Ubuntu 9.04). Additionally, My ISP's DNS servers often crash or become unresponsive. Are there any open DNS servers that are reliable (i don't want to reconfig every day) that I could use as my primary, then if those fail, then use my ISP's? UPDATE: Also looking for each workstation to be able to use dhcp to connect, but instead of getting ISP dns servers, getting my internal one.... Thanks

    Read the article

  • Problem with network policy rule in Network Policy Server

    - by Robert Moir
    Trying to configure RADIUS for a college network, and have run into the following frustration: I can't set an "AND" condition for group membership of authenticated objects in the network policy rules, e.g. I'm trying to create a NPS rule that says, essentially "IF user is a member of [list of user groups] And is authenticating from a computer in [wireless computer group] then allow access. The screenshot above is the rule I am having trouble with. It does not work as written. The rule underneath it, which is identical in every aspect except the conditions rule, does work. I've tried changing the non-working rule to define each set of groups as "Windows group" rather than specifically as machine and user groups, with no change. With the "faulty" rule enabled and the working one disabled, any attempt to login with a valid account from a machine that is in the wireless computers group gives a 6273 audit event in the windows event log: Reason code 66 - "the user attempted to use an authentication method that is not enabled on the matching network policy". Disabling the "faulty" rule, enabling the other rule and logging in with the same account and computer works just fine.

    Read the article

  • Windows 7 UAC (user access control) is being disabled on every reboot

    - by Christian Thamer
    To put it simply, I noticed UAC was disabled so I enabled it. I was prompted to reboot the computer for the changes to take effect. Upon my reboot I checked the settings again as I hadn't disabled UAC in the first place. It was again set to off (never notify). For the heck of it I repeated the process a couple of more times. Same result each time. I have Microsoft Security Essentials running a full scan nightly so I should be protected from viruses. I also did an on demand scan with the online tool at www.antivirus.com. Nothing was found. Other than the fact that UAC is being disabled on each reboot I have no other reason to suspect a virus. So my question is does anyone have insight into if this is a possible problem with a virus or other malware changing my UAC settings on each boot or is it possibly a problem with Windows and UAC itself? If it is malware are there suggestions for other products outside of the ones I have used to detect and remove it.

    Read the article

  • Speeding up Outlook Express on Windows XP over satellite

    - by John
    My brother is in the field with Doctors Without Borders. I'm posting this question on his behalf. We use outlook express (on a pc running windows XP) and a 9600 baud dial up satellite phone modem to get our email direct from the server in Paris. As this is a very expensive way to communicate (our satellite bill is $50K a year, no joke), it seems like trying to streamline is a good idea. Here's the question- when we connect, the sequence goes: Send outbox mails. This goes pretty quickly, probably 10-15 seconds for each email, up to maybe a couple minutes for an email of 150k or so). The status bar moves pretty quickly, according to the emails sent. The system then says "Checking for new messages on (our account name), and "Receiving list of messages from server". This takes a long time. Like 10-15 minutes. The status bar crawls along. Then it receives the messages. "Receiving messages from server". Again, each message takes 10-15 seconds, and this part moves along reasonably fast. I'm curious as to what is going on in the second part. It takes forever, and doesn't seem to be part of the sending or receiving messages themselves. Is there a way to speed up the process by changing a preference with communicating with the server or something? Does anyone have any advice for him speeding up what Outlooks Express is doing? Obviously his software is ancient and adding more software is not realistic based on the connection speed. Thanks!

    Read the article

  • Windows clients unable to access Samba share on AD joined Linux box every 7 days

    - by Hassle2
    The problem: Every 7 days, 2 Windows Servers are unable to access a SMB/CIFS share. It will start working after a handful of hours. The environment: OpenFiler Linux box joined to 2003 AD Domain Foreground app on Win2003 server access the SMB/CIFS share with windows credentials Another process on Win2008 access the share via SQL Server with windows credentials The Samba version on the Linux box is 3.4.5. Security is set to ADS wbinfo and getent return back expected users and groups Does not look to be a double hop issue as it's always the 2 accounts, regardless of the calling user. There is a DNS entry in both forward and reverse lookup zone for the linux box The linux box's computer object in active directory shows that it was modified around/at the same time that the two clients started failing to access the share Trying to access the share via IP works when by name does not Rebooting the Windows server takes care of it (it's production and only restarted it once) Restarting smbd, winbind, nmbd had no effect Error in samba log for the client in question: smbd/sesssetup.c:342(reply_spnego_kerberos) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! The Question: Does this look like the machine account password is changing (hence the AD object showing the updated modified date) or are the two windows clients unable to request a new ticket that works against this linux box?

    Read the article

  • Blue screen issue

    - by Jack
    I received several BSOD's that are recorded in the following logs: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 3081 Additional information about the problem: BCCode: 50 BCP1: FFFFF95FF8150C10 BCP2: 0000000000000008 BCP3: FFFFF95FF8150C10 BCP4: 0000000000000005 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that help describe the problem: C:\Windows\Minidump\040412-20030-01.dmp C:\Users\Jack\AppData\Local\Temp\WER-33025-0.sysdata.xml ~~~~~ Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 3081 Additional information about the problem: BCCode: 1e BCP1: 0000000000000000 BCP2: 0000000000000000 BCP3: 0000000000000000 BCP4: 0000000000000000 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that help describe the problem: C:\Windows\Minidump\040412-32729-01.dmp C:\Users\Jack\AppData\Local\Temp\WER-64319-0.sysdata.xml It seems to occur at random. I have gone 2 months without a BSOD, then I have gone a week with 10+ without changing what I am doing. This is my system: Windows 7 Professional 64-bit Gigabyte GA-890GPA-UD3H AMD Phenom II x6 1090T Processor 3.2GHz 8GB Ram(4X 2GB) Radeon HD 7850 2TB HDD Thermaltake 500W PSU I'm not sure about what the BSOD says, it just counts to 100 by 5's then restarts the computer. It happens fast and I have tried to get a picture before but to no avail.

    Read the article

  • Windows 7 network performance tuning for LAN

    - by Hubert Kario
    I want to tune Windows 7 TCP stack for speed in a LAN environment. Bit of background info: I've got a Citrix XenServer set up with Windows 2008R2, Windows 7 and Debian Lenny with Citrix kernel, Windows machines have Tools installed the iperf server process is running on different host, also Debian Lenny. The servers are otherwise idle, tests were repeated few times to confirm results. While testing with iperf 2008R2 can achieve around 600-700Mbps with no tuning what so ever but I can't find any guide or set of parameters that will make Windows 7 achieve anything over 150Mbps with no change in TCP window size using -w parameter to iperf. I tried using netsh autotuining to disabled, experimental, normal and highlyrestricted - no change. Changing congestionprovider doesn't do anything, just as rss and chimney. Setting all the available settings to same values as on Windows 2008R2 host doesn't help. To summarize: Windows 2008R2 default settings: 600-700Mbps Debian, default settings: 600Mbps Windows 7 default settings: 120Mbps Windows 7 default, iperf -w 65536: 400-500Mbps While the missing 400Mbps in performance I blame on crappy Realtek NIC in the XenServer host (I can do ~980Mbps from my laptop to the iperf server) it doesn't explain why Windows 7 can't achieve good performance without manually tuning window size at the application level. So, how to tune Windows 7?

    Read the article

< Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >