Search Results

Search found 18845 results on 754 pages for 'wayback machine'.

Page 220/754 | < Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >

  • "SIOCSIFADDR: No such device" after restoring backup

    - by Paul Tomblin
    I bought some new hardware, and tried to restore my backup on it. When I boot, I don't get a network connection. If I type "ifup eth0" on the command line, I see the messages: SIOCSIFADDR: No such device eth0: No such device lspci shows an ethernet controller (Intel 82546GB). ifconfig does not show any controller except loopback. I tried installing bare Debian on the machine and the network worked then, but now I want to make it like my old machine was. Googling this problem only seems to find people having this problem in VMs. I'm not in a VM.

    Read the article

  • Client PC not booting when certain TFT plugged in - TFT or graphics card failure?

    - by Chake
    here comes something quite strange: On a client machine (DELL Vostro 420) we experienced problems when booting: when turning on the machine beeps normal but doesn't display anything and doesn't boot. After some testing I found out, that this only happens if one (of the two) monitors (Iiyama ProLite E2472HDD) is plugged in while booting. If the other monitor (TFT 2) is plugged in everything is fine. Here a small illustration, TFT 1 is the bad guy: TFT 1 | TFT 2 | failure x | x | x x | | x | x | After BIOS-Phase I can safely plug in TFT 1 and everything works just fine. The question is, what can be done to avoide this behavior: Change monitor? (Iiyama ProLite E2472HDD) Change graphics card? (GeForce 9800 GT) Other suggestions?

    Read the article

  • Remotely start VNC server on computer with no Admin password

    - by Joe M.
    I'm trying to remotely access a particular computer of mine and it seems that VNC has stopped. I can tell that the computer is still running because I can VNC into another machine on the same network and can see my target machine under the Network section in Windows Explorer and can also ping it succesfully. To summarize: I own the target computer I am currently too far to physically access it Remote Desktop Connection feature of Windows is not enabled The computer normally runs a VNC server, but it seems to have stopped The computer is definitely on and connected to the network The computer has no password on the Admin account I can VNC into other computers on the same LAN Given these conditions how can I get into the target to open VNC server, or even just reboot the target (VNC should open on startup)? I have tried PsExec and get "access is denied", and also tried "Connect to another computer.." from the Computer Management console and also get "access is denied".

    Read the article

  • How to reply some request from which routes its came from?

    - by tacoen
    I wonder if we can reply some request from which route its came from? My Situation is like this: eth0 192.168.10.1 --> gw: 192.168.10.254 nm: 24 eth1 192.168.11.1 --> gw: 192.168.11.254 nm: 24 Since this two IP is on the same machine, normally when we ping to 192.168.11.1 from 192.168.10.2. This machine will not reply to 192.168.10.2 because 192.168.10.0/24 it's on eth0, and the packets where requested via eth1. Can I make it works? I'm using Linux ubuntu, and the application will be listen to eth1 only.

    Read the article

  • Can't connect nonlocally after 12.10 upgrade

    - by user101815
    I've just upgraded one of my systems from 12.04 to 12.10. Now I can't connect on that system beyond my local network. Connections within the local network seem to work fine, and I can make nonlocal connections from other machines (like the one I'm asking this question from). I suspect that some routing information has been messed up, but I don't know where to look for it. It's not a nameserver problem -- pinging outside sites by their IP addresses doesn't work either. I have another laptop next to this one, also running Kubuntu 12.10. On the one that can't connect, arp produces no output. On the other one, it produces 192.168.0.1 ether 00:23:69:fa:ce:ae C wlan0 On the working machine, the output of netstat starts with some tcp entries. On the nonworking one, those entries are absent. I asked this question on the Ubuntu forum but haven't gotten any answers there. One further complication: since the troublesome machine has no outside connection, it's extremely difficult to download anything to it. For what it's worth, "ping 8.8.8.8" produces "connect: Network is unreachable". Update: after a lot of fiddling, I have my external world back. I don't know what the key action was, but the first indication of progress was that "ping 8.8.8.8" worked. At that point I still didn't have a working nameserver, so external URLs didn't work. But I did this (based on an online post, of course): sudo dpkg-reconfigure resolvconf and answered Yes to all prompts. That did the trick!! Apparently my problem was unique, or close to it, since I couldn't find any online references to it: local net working, remote net not working, including explicit IP addresses. So I suppose that if no one else has this problem, no one cares about the solution!!

    Read the article

  • SSL issues with puppet agent at openSUSE

    - by Roman Grazhdan
    I have a master running at my vps, and it has a simple helloworld manifest which works fine with any ubuntu machine I have. It connects, exchanges keys and creates test file allright, so I'm sure it's not server issue. The agent which is running at a virtual machine with openSUSE says: err: Could not request certificate: SSL_connect returned=1 errno=0 state=SSLv3 read server certificate B: certificate verify failed. This is often because the time is out of sync on the server or client I believe it's probably a broken or missing lib, since the package is not built very accurately - it wouldn't start out of the box because of wrong path to lockfile, for example. So how do I figure out what exactly is wrong here? The time is allright, I've checked it. I probably could do without SSL if it's possible, since that SUSE machines are just for training, but it's the last opportunity.

    Read the article

  • Windows 2008 R2 Not resolving IP's or domains

    - by InsaneAR
    I have two servers with Microsoft Windows Server 2008 R2 x64, and today I realized that one of them don't resolve IP's or domain names. If I ping the same machine IP, it respond, but if I ping an external IP (like 8.8.8.8 or any other) it does not work. The same with domain names. At Windows Event Viewer I'm having Warning 1014: Name resolution for the name timed out after none of the configured DNS servers responded THE SERVER HAS CONNECTIVITY, I'm connected remotely and the services and incoming traffic (like FTP, etc) are working OK. Things I've done & tested: Run Kaspersky Virus Removal 10 Restart/Turn off the DNS Client service Clean the hosts file Reboot the server Turn off the Windows Firewall (there's not another firewall) Quit or replace the current DNS servers I just can ping the same machine IP or the gateway! Can anybody help me?

    Read the article

  • Ping IP: connect: no such process

    - by Matthew
    I am trying to figure out this issue and am getting a weird error. We have two boxes which used to talk to one another on the network. Both are reachable via ssh from a separate network, which means they are able to talk to their default gateways just fine. When we try to ping from the linux machine to the linux machine, we get a bunch of timeouts. When we try to ping from the linux box back, we are getting connect: no such process. I can't seem to find much documentation on this error, though there consistently seem to be references to VPN stuff when googling for this error. The

    Read the article

  • Outlook 2010 and Exchange 2003

    - by user69644
    We've had some issues with a user who has upgraded to Outlook 2010 and attached to an internal Exchange 2003 SP2 server. They get errors more or less saying cannot send, contact your administrator and then a long error string whenever attempting to send. They receive just fine - but can't get any outbound flow. We recreate the users profile on another Windows 7 machine with Outlook 2010 and it worked fine. Concerned this might be an issue that rears it's ugly head later or at some random time. We noted some KB docs about the issue recommending registry changes - we've reviewed and ensure these changes were made and still have the issue on the one machine. Any thoughts?

    Read the article

  • Ping reply not getting to LAN machines but getting in Linux router Gateway

    - by Kevin Parker
    I have configured Ubuntu 12.04 as Gateway machine.its having two interfaces eth0 with ip 192.168.122.39(Static) and eth1 connected to modem with ip address 192.168.2.3(through DHCP). ip-forwarding is enabled in router box. Client machine is configured as: ip address 192.168.122.5 and gateway 192.168.122.39 Client machines can ping router box(192.168.122.39).but when pinged 8.8.8.8 reply is not reaching Client machines but in the tcpdump output on gateway i can see echo request for 8.8.8.8 but never echo reply.Is this because of 122.5 not forwarding request to 2.0 network.Can u please help me in fixing this.

    Read the article

  • How do I boot Windows 8 into Safe Mode?

    - by Earlz
    I have Windows 8 Enterprise x64. It's installed a virtual machine. After trying to update VMWare's guest extension it black screened. After resetting it, now the virtual machine won't boot. It just says "automatic repair couldn't repair your PC" Everything I do ends with an error or it coming back to this screen. If I go to Troubleshoot Advanced Options Start up settings and then go to Safe Mode, all it will do is say "preparing automatic repair" and then "diagnosing your PC" and then will come straight back to the "automatic repair couldn't repair your PC" screen. It's as if it doesn't even attempt to go into safe made. Is there anything else I can do before I reformat?

    Read the article

  • Samba share external USB device

    - by bioShark
    I managed to share stuff from my Ubuntu 12.04 to my private network, and the data is visible from a Windows machine. I even shared a hdd that has windows on it. So everything seems to work fine. When I want to share a mounted device (USB pen drive, USB HDD... etc) however, I get from the Windows machine: Access denied on file \... I realize that this is due to the missing rights on the mounted folder. By default a mounted folder gets the equivalent of 700 : drwx------, and the owner myself. But, I can't seem to change the rights on the external device... they remain 700. Is there a special trick I need to do in order to share NTFS mounted usb devices? Thanks P.S. from this Question I see that NTFS devices can not be shared....is this true? It's a bit strange, because I have in my PC 2 HDD's with 3 NTFS partitions, and I can share them without a problem.

    Read the article

  • Generic Windows 98 USB Drive drivers?

    - by Electrons_Ahoy
    I've got an old Win98 machine that I'd like to pull some data off of. (Tens of gigs of data, actually.) The machine still runs fine, but due to the age, it doesn't have a cd burner, and the pre-NT networking won't connect to SMB shares without a fair amount of wrenching on the registry that I don't really want to do. What I really want to do is plug in an external USB hard drive and copy the files. But - Win98 didn't ship with generic USB drive drivers, and external drives don't ship with them these days. Can anyone point me at a reputable generic driver I can install?

    Read the article

  • Limit a process's relative (not absolute) processor consumption in Linux

    - by BobBanana
    What is the standard way in Linux to enforce a system policy to limit the relative CPU use of a single process? That is, on a quad-core machine, I never want a process to use more than 2 CPUs at once, even if the process creates more threads. I do not want an absolute time limit, just a relative limit so that one task cannot dominate the machine. This is also different than renice, which allows a process to use all the resources but just politely step aside if others need them too. ulimit is the usual resource limiting tool, but it does not allow such CPU restrictions.. it can limit the number of processes per user, or absolute CPU time, not restrict the maximum number of active threads of a single process. I've found a couple of user-level tools, like CPUlimit, but not a system level tool or setting. Does such a standard resource controller exist in Linux (Red Hat Enterprise, if it matters.) If there is such a limit imposed, how would a user identify it?

    Read the article

  • Windows Server 2012 is telling me it's not activated when it is

    - by LeonidasFett
    I have a Windows Server 2012 Machine were I need to do some development. The machine is a Hyper-V VM. I activated it with a valid key and restarted the VM. After it booted up again, I went into system properties and saw that it said that Windows is activated. However, there is still the message "Activate Windows" on the desktop wallpaper and if try to change something (for example, the look) it tells me that I need to activate first. Is there anybody who has experienced this? The host OS is Windows 8.1. I already installed all updates and tried to activate again using this CMD-Command: slmgr.vbs /ipk {product key, including dashes}

    Read the article

  • How can I make my PHP development environment more efficient?

    - by pixel
    I want to start a home-brew pet project in PHP. I've spent some time in my life developing in PHP and I've always felt it was hard to organize the development environment efficiently. In my previous PHP work, I've used a windows desktop machine and a linux server for development. This configuration had it's advantages: it's easy to configure Apache (and it's modules)/PHP/MySql on a linux box, and, at the time, this configuration was the same like on production server. However, I never successfully set up a debug connection between my Eclipse install and X-debug on server. Transferring files from my local workspace to the server was also very annoying (either ftp or Bazaar script moving files from repository to web root). For my new setup, I'm considering installing everything on my local machine. I'm afraid that it will slow down workstation performance (LAMP + Eclipse), and that compatibility problems will kick-in. What would you recommend? Should I develop using two separate machines? On one? Do you have experience using one of above configurations in your work?

    Read the article

  • How do I turn of "auto-echo" in bash when I 'cd'?

    - by Avery Chan
    I don't know when this started happening but now, every time I cd to a directory it echoes the path right before it changes directories. This happens when I log into a server but doesn't happen on my local machine. The server is running Linux. My local machine is running Mac OS X. I searched the Google as well as looked at the bash man page but I couldn't find anything. My .bashrc/.bash_profile doesn't have anything related to 'cd' (that I know of). How do I modify this "feature"?

    Read the article

  • connecting 2 ubuntu computers as a lan

    - by Brendan Cutjar
    Hi i am trying to connect 2 ubuntu computers as a LAN. In my current setup I have: One machine running ubuntu 11.10 with Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller While the other machine is running Ubuntu 12.04 with an Atheros Communications Inc AR8152 v1.1 Fast Ethernet The two machines are connected via a switch (Edimax ES-3205P). Unfortunately I still cannot connect the two machines together. Can somebody please show me what to do and how to go about solving this issue?

    Read the article

  • Can't access the Internet in VMware Workstation

    - by asunnysunday
    I'm using VMware 7.1.2 in Windows 7 with Ubuntu 11.04 as a guest OS. In the host OS (Windows 7), I can access the Internet without any problems but in the virtual machine I can't access the Internet. I've tried the following but with no success: Use all methods of connecting to the Internet in "Virtual Machine Settings": Bridged, NAT, Custom; none work. Used cabled and wireless connections on the PC - neither of them work. I've used Ubuntu in VMware for several months - previously the Internet was always accessible. Could the cause of this be because I upgraded to Ubuntu 11.04?

    Read the article

  • How to add a VM Server to a VM Domain when the host is not on that domain.

    - by Charlie
    I have created A VM running Windows Server 2008 R2, using VMWare. I have configured this as a domain controller running a Windows Server 2008 domain. I have also created another VM running Windows Server 2008 R2. The HOST machine is using Windows 7 Professional 64 bit. When I try to add the second VM into the domain that the first is the DC for it fails as the VM cannot contact the DC. Simple question really. What have I missed? Is it something to do with the configuration on the Host machine? What do I need to do to enable this scenario? Thanks

    Read the article

  • Podcast online sync service

    - by Hannes de Jager
    I download and listen to podcasts on 2 different computers. I would like so somehow sync the metadata such that, when I subscribe to a feed it gets subscribed on my other computer also. When I've downloaded a podcast it gets marked as downloaded on the other machine also. Is there a software + webservice combination that will allow me to do this. That will save its doings to the cloud and update it also? My one machine is Windows and the other one Linux.

    Read the article

  • Do you leave Windows Automatic Updates enabled on your production IIS server?

    - by Nobody
    If you were running a 24/7 website on Windows Server 2003 (IIS6). Would you leave the Windows automatic update feature enabled or would you turn it off? When enabled, you always get the latest security patches and bug fixes automatically as soon as they're available, which is the most secure choice. However, the machine will sometimes get automatically rebooted to apply the updates leading to a couple of minutes of downtime in the middle of the night. Also, I've seen rare occasions where the machine does not restart correctly resulting in further downtime. If auto updates are off, when do you apply the patches? I guess you have to use a load balancer with multiple web servers and rotate them out of the production site, apply patches manually, and put them back in. This can be logistically inconvenient when the load balancer is managed by a hosting company. You will also have machines in production that don't always have the latest security patches and you have to routinely spend time deciding which patches to apply and when.

    Read the article

  • TPM had to be reintialized: Does a new recovery password have to be uploaded to AD?

    - by MDMoore313
    Some way some how, a user's machine couldn't get read the bitlocker password off of the TPM chip, and I had to enter the recovery key (stored in AD) to get in. No big deal, but once in the machine, I tried to suspend bitlocker per recovery documentation, and got an error message about the TPM not being initialized. I knew the TPM was on and activated in the BIOS, but Windows still made me reinitialize the TPM chip, and in the process it created a new TPM owner password. I found that odd because it prompted me to save this password or print it (there wasn't an option not to), but it made no reference of a recovery password, nor did it back this password up to AD. After the user took her laptop and left I started thinking that if the TPM password change, does the recovery password change also? If so, that new recovery password will need to be uploaded to AD, but MS' documentation doesn't make that clear, and doesn't back up the new recovery key (if one exists) to AD automatically when the group policy says it must, and from a network standpoint AD is accessible.

    Read the article

  • Send Ctrl+Alt+Del over VNC with Windows Vista and UAC off?

    - by jasonh
    I'm trying to set up a machine here with UltraVNC on Windows Vista with UAC off. The problem is, in this configuration, I can't send Ctrl + Alt + Del (CAD) to the Windows Vista machine, and so I'm stuck at the login screen, which is waiting for the CAD sequence. I'm joined to a domain, so I don't think I can disable the CAD requirement. I can't re-enable UAC either. I also tried using the on-screen keyboard, but it didn't seem to work. Is there a workaround or a solution?

    Read the article

< Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >