Search Results

Search found 5723 results on 229 pages for 'turing machines'.

Page 221/229 | < Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >

• CodePlex Daily Summary for Monday, August 18, 2014

  CodePlex Daily Summary for Monday, August 18, 2014Popular ReleasesMagick.NET: Magick.NET 7.0.0.0001: Magick.NET linked with ImageMagick 7-Beta.CMake Tools for Visual Studio: CMake Tools for Visual Studio 1.2: This release adds the following new features and bug fixes from CMake Tools for Visual Studio 1.1: Added support for CMake 3.0. Added support for word completion. Added IntelliSense support for the CMAKEHOSTSYSTEM_INFORMATION command. Fixed syntax highlighting for tokens beginning with escape sequences. Fixed issue uninstalling CMake Tools for Visual Studio after Visual Studio has been uninstalled.GW2 Personal Assistant Overlay: GW2 Personal Assistant Overlay 1.1: Overview1.1 is the second 'stable' release of the GW2 Personal Assistant Overlay. This version includes just a couple of very minor features and some minor bug fixes. For details regarding installation, setup, and general use, see Documentation. Note: If you were using a previous version, you will probably want to copy over the following user settings files: GW2PAO.DungeonSettings.xml GW2PAO.EventSettings.xml GW2PAO.WvWSettings.xml GW2PAO.ZoneCompletionSettings.xml New FeaturesAdded new "No...WallSwitch: WallSwitch 1.2.5: Version 1.2.5 Changes: Added support for sequential order in collage mode. Added option to display multiple images per switch in collage mode. Fixed bug where border width wasn't being loaded properly, and was reverting to default values. Fixed bug where sequential order was repeating images on multiple monitors. Decreased likelihood of random images being repeated.OpenCppCoverage: OpenCppCoverage 0.9.1: - Add Jenkins support. - Command line argument can be placed inside a config file. If you do not have Visual Studio C++ 2013 you need to download redistributable packages: http://www.microsoft.com/en-us/download/details.aspx?id=40784Easy Backup Windows Service: Release 2.0 with CU: Fix log error when "To" directory not exist in fyle system. Force run program as administrator by default. Add 'everyday' schedule element. Update solution to VS 2013.Easy Backup Application: Release 2.0 with CU: Fix log error when "To" directory not exist in fyle system. Fix app location initialization. Force run program as administrator by default. Update solution to VS 2013.TEBookConverter: 1.5: Added: Turkish and French translations Added: A few interface changes Removed: SkinDynamulet: Dynamulet v0.1: DynamoDB Transaction Server v0.1Console parallel nunit tests runner: ConsoleUnitTestsRunner 1.03: bugfixingFluentx: Fluentx v1.5.3: Added few more extension methods.fastJSON: v2.1.2: 2.1.2 - bug fix circular referencesJPush.NET: JPush Server SDK 1.2.1 (For JPush V3): Assembly: 1.2.1.24728 JPush REST API Version: v3 JPush Documentation Reference .NET framework: v4.0 or above. Sample: class: JPushClientV3 2014 Augest 15th.SEToolbox: SEToolbox 01.043.008 Release 1: Changed ship/station names to use new DisplayName instead of Beacon/Antenna. Fixed issue with updated SE binaries 01.043.018 using new Voxel Material definitions.Google .Net API: Drive.Sample: Google .NET Client API – Drive.SampleInstructions for the Google .NET Client API – Drive.Sample</h2> http://code.google.com/p/google-api-dotnet-client/source/browse/?repo=samples#hg%2FDrive.SampleBrowse Source, or main file http://code.google.com/p/google-api-dotnet-client/source/browse/Drive.Sample/Program.cs?repo=samplesProgram.cs <h3>1. Checkout Instructions</h3> <p><b>Prerequisites:</b> Install Visual Studio, and <a href="http://mercurial.selenic.com/">Mercurial</a>.</p> ...FineUI - jQuery / ExtJS based ASP.NET Controls: FineUI v4.1.1: -??Form??????????????（???-5929）。 -?TemplateField??ExpandOnDoubleClick、ExpandOnEnter、ExpandToSelectRow????（LZOM-5932）。 -BodyPadding???????，??“5”“5 10”，???????????“5px”“5px 10px”。 -??TriggerBox?EnableEdit=false????，??????????????（Jango_Jing-5450）。 -???????????DataKeyNames???????????（yygy-6002）。 -????????????????????????（Gnid-6018）。 -??PageManager???AutoSizePanelID????，??????????????????（yygy-6008）。 -?FState???????????????，????????????????（????-5925）。 -??????OnClientClick???return?????????（FineU...DNN CMS Platform: 07.03.02: Major Highlights Fixed backwards compatibility issue with 3rd party control panels Fixed issue in the drag and drop functionality of the File Uploader in IE 11 and Safari Fixed issue where users were able to create pages with the same name Fixed issue that affected older versions of DNN that do not include the maxAllowedContentLength during upgrade Fixed issue that stopped some skins from being upgraded to newer versions Fixed issue that randomly showed an unexpected error during us...WordMat: WordMat for Mac: WordMat for Mac has a few limitations compared to the Windows version - Graph is not supported (Gnuplot, GeoGebra and Excel works) - Units are not supported yet (Coming up) The Mac version is yet as tested as the windows version.MFCMAPI: August 2014 Release: Build: 15.0.0.1042 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010/2013 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeEWSEditor: EwsEditor 1.10 Release: • Export and import of items as a full fidelity steam works - without proxy classes! - I used raw EWS POSTs. • Turned off word wrap for EWS request field in EWS POST windows. • Several windows with scrolling texts boxes were limiting content to 32k - I removed this restriction. • Split server timezone info off to separate menu item from the timezone info windows so that the timezone info window could be used without logging into a mailbox. • Lots of updates to the TimeZone window. • UserAgen...New Projectsballmon: ballmonExchange Database Recovery With and Without Log Files is Possible: This segments giving an overview of Exchange Server transaction log files. It describes process how users can recover their database with & without log filesFabs.Net: Ego tatmini ve gelisme amaçli yaptigim bir projedir.JacoChat: JacoChat is a simple chatting interface that uses my personal webserver as a "wall" for people to chat on.ManagedWin32: ManagedWin32 is a library that exposes the Win32 API to .NET applications.Open XML Extensions: The project provides additions to the Open XML SDK and related projects (e.g., PowerTools for Open XML), starting with MemoryStreams for Open XML Documents.orntic: Project for insurace companyTBOX: The Treasure Box Library: TBOX is a mutli-platform c library for unix, windows, mac, ios, android, etc. It includes asio, stream, container, algorithm, xml and other library modules.WeatherTS: Typescript weather application.?????@/????: ??????????????:????,????,????,???????,????????,??????:????????,?????! ?????????: ????????????????????,????????:??、??、???,?????????????????????! ????-??: ??????????????，????，???????????????。

  Read the article

• Different Not Automatically Implies Better

  - by Alois Kraus

  Originally posted on: http://geekswithblogs.net/akraus1/archive/2013/11/05/154556.aspxRecently I was digging deeper why some WCF hosted workflow application did consume quite a lot of memory although it did basically only load a xaml workflow. The first tool of choice is Process Explorer or even better Process Hacker (has more options and the best feature copy&paste does work). The three most important numbers of a process with regards to memory are Working Set, Private Working Set and Private Bytes. Working set is the currently consumed physical memory (parts can be shared between processes e.g. loaded dlls which are read only) Private Working Set is the physical memory needed by this process which is not shareable Private Bytes is the number of non shareable which is only visible in the current process (e.g. all new, malloc, VirtualAlloc calls do create private bytes) When you have a bigger workflow it can consume under 64 bit easily 500MB for a 1-2 MB xaml file. This does not look very scalable. Under 64 bit the issue is excessive private bytes consumption and not the managed heap. The picture is quite different for 32 bit which looks a bit strange but it seems that the hosted VB compiler is a lot less memory hungry under 32 bit. I did try to repro the issue with a medium sized xaml file (400KB) which does contain 1000 variables and 1000 if which can be represented by C# code like this: string Var1; string Var2; ... string Var1000; if (!String.IsNullOrEmpty(Var1) ) { Console.WriteLine(“Var1”); } if (!String.IsNullOrEmpty(Var2) ) { Console.WriteLine(“Var2”); } ....   Since WF is based on VB.NET expressions you are bound to the hosted VB.NET compiler which does result in (x64) 140 MB of private bytes which is ca. 140 KB for each if clause which is quite a lot if you think about the actually present functionality. But there is hope. .NET 4.5 does allow now C# expressions for WF which is a major step forward for all C# lovers. I did create some simple patcher to “cross compile” my xaml to C# expressions. Lets look at the result: C# Expressions VB Expressions x86 x86 On my home machine I have only 32 bit which gives you quite exactly half of the memory consumption under 64 bit. C# expressions are 10 times more memory hungry than VB.NET expressions! I wanted to do more with less memory but instead it did consume a magnitude more memory. That is surprising to say the least. The workflow does initialize in about the same time under x64 and x86 where the VB code does it in 2s whereas the C# version needs 18s. Also nearly ten times slower. That is a too high price to pay for any bigger sized xaml workflow to convert from VB.NET to C# expressions. If I do reduce the number of expressions to 500 then it does need 400MB which is about half of the memory. It seems that the cost per if does rise linear with the number of total expressions in a xaml workflow.  Expression Language Cost per IF Startup Time C# 1000 Ifs x64 1,5 MB 18s C# 500 Ifs x64 750 KB 9s VB 1000 Ifs x64 140 KB 2s VB 500 Ifs x64 70 KB 1s Now we can directly compare two MS implementations. It is clear that the VB.NET compiler uses the same underlying structure but it has much higher offset compared to the highly inefficient C# expression compiler. I have filed a connect bug here with a harsher wording about recent advances in memory consumption. The funniest thing is that one MS employee did give an Azure AppFabric demo around early 2011 which was so slow that he needed to investigate with xperf. He was after startup time and the call stacks with regards to VB.NET expression compilation were remarkably similar. In fact I only found this post by googling for parts of my call stacks. … “C# expressions will be coming soon to WF, and that will have different performance characteristics than VB” … What did he know Jan 2011 what I did no know until today? ;-). He knew that C# expression will come but that they will not be automatically have better footprint. It is about time to fix that. In its current state C# expressions are not usable for bigger workflows. That also explains the headline for today. You can cheat startup time by prestarting workflows so that the demo looks nice and snappy but it does hurt scalability a lot since you do need much more memory than necessary. I did find the stacks by enabling virtual allocation tracking within XPerf which is still the best tool out there. But first you need to look at your process to check where the memory is hiding: For the C# Expression compiler you do not need xperf. You can directly dump the managed heap and check with a profiler of your choice. But if the allocations are happening on the Private Data ( VirtualAlloc ) you can find it with xperf. There is a nice video on channel 9 explaining VirtualAlloc tracking it in greater detail. If your data allocations are on the Heap it does mean that the C/C++ runtime did create a heap for you where all malloc, new calls do allocate from it. You can enable heap tracing with xperf and full call stack support as well which is doable via xperf like it is shown also on channel 9. Or you can use WPRUI directly: To make “Heap Usage” it work you need to set for your executable the tracing flags (before you start it). For example devenv.exe HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\devenv.exe DWORD TracingFlags 1 Do not forget to disable it after you did complete profiling the process or it will impact the startup time quite a lot. You can with xperf attach directly to a running process and collect heap allocation information from a gone wild process. Very handy if you need to find out what a process was doing which has arrived in a funny state. “VirtualAlloc usage” does work without explicitly enabling stuff for a specific process and is always on machine wide. I had issues on my Windows 7 machines with the call stack collection and the latest Windows 8.1 Performance Toolkit. I was told that WPA from Windows 8.0 should work fine but I do not want to downgrade.

  Read the article

• ndd on Solaris 10

  - by user12620111

  This is mostly a repost of LaoTsao's Weblog with some tweaks. Last time that I tried to cut & paste directly off of his page, some of the XML was messed up. I run this from my MacBook. It should also work from your windows laptop if you use cygwin. ================If not already present, create a ssh key on you laptop================ # ssh-keygen -t rsa ================ Enable passwordless ssh from my laptop. Need to type in the root password for the remote machines. Then, I no longer need to type in the password when I ssh or scp from my laptop to servers. ================ #!/usr/bin/env bash for server in `cat servers.txt` do   echo root@$server   cat ~/.ssh/id_rsa.pub | ssh root@$server "cat >> .ssh/authorized_keys" done ================ servers.txt ================ testhost1testhost2 ================ etc_system_addins ================ set rpcmod:clnt_max_conns=8 set zfs:zfs_arc_max=0x1000000000 set nfs:nfs3_bsize=131072 set nfs:nfs4_bsize=131072 ================ ndd-nettune.txt ================ #!/sbin/sh # # ident   "@(#)ndd-nettune.xml    1.0     01/08/06 SMI" . /lib/svc/share/smf_include.sh . /lib/svc/share/net_include.sh # Make sure that the libraries essential to this stage of booting  can be found. LD_LIBRARY_PATH=/lib; export LD_LIBRARY_PATH echo "Performing Directory Server Tuning..." >> /tmp/smf.out # # Standard SuperCluster Tunables # /usr/sbin/ndd -set /dev/tcp tcp_max_buf 2097152 /usr/sbin/ndd -set /dev/tcp tcp_xmit_hiwat 1048576 /usr/sbin/ndd -set /dev/tcp tcp_recv_hiwat 1048576 # Reset the library path now that we are past the critical stage unset LD_LIBRARY_PATH ================ ndd-nettune.xml ================ <?xml version="1.0"?> <!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1"> <!-- ident "@(#)ndd-nettune.xml 1.0 04/09/21 SMI" --> <service_bundle type='manifest' name='SUNWcsr:ndd'>   <service name='network/ndd-nettune' type='service' version='1'>     <create_default_instance enabled='true' />     <single_instance />     <dependency name='fs-minimal' type='service' grouping='require_all' restart_on='none'>       <service_fmri value='svc:/system/filesystem/minimal' />     </dependency>     <dependency name='loopback-network' grouping='require_any' restart_on='none' type='service'>       <service_fmri value='svc:/network/loopback' />     </dependency>     <dependency name='physical-network' grouping='optional_all' restart_on='none' type='service'>       <service_fmri value='svc:/network/physical' />     </dependency>     <exec_method type='method' name='start' exec='/lib/svc/method/ndd-nettune' timeout_seconds='3' > </exec_method>     <exec_method type='method' name='stop'  exec=':true'                       timeout_seconds='3' > </exec_method>     <property_group name='startd' type='framework'>       <propval name='duration' type='astring' value='transient' />     </property_group>     <stability value='Unstable' />     <template>       <common_name>     <loctext xml:lang='C'> ndd network tuning </loctext>       </common_name>       <documentation>     <manpage title='ndd' section='1M' manpath='/usr/share/man' />       </documentation>     </template>   </service> </service_bundle> ================ system_tuning.sh ================ #!/usr/bin/env bash for server in `cat servers.txt` do   cat etc_system_addins | ssh root@$server "cat >> /etc/system"   scp ndd-nettune.xml root@${server}:/var/svc/manifest/site/ndd-nettune.xml   scp ndd-nettune.txt root@${server}:/lib/svc/method/ndd-nettune   ssh root@$server chmod +x /lib/svc/method/ndd-nettune   ssh root@$server svccfg validate /var/svc/manifest/site/ndd-nettune.xml   ssh root@$server svccfg import /var/svc/manifest/site/ndd-nettune.xml done

  Read the article

• How to fix basicHttpBinding in WCF when using multiple proxy clients?

  - by Hemant

  [Question seems a little long but please have patience. It has sample source to explain the problem.] Consider following code which is essentially a WCF host: [ServiceContract (Namespace = "http://www.mightycalc.com")] interface ICalculator { [OperationContract] int Add (int aNum1, int aNum2); } [ServiceBehavior (InstanceContextMode = InstanceContextMode.PerCall)] class Calculator: ICalculator { public int Add (int aNum1, int aNum2) { Thread.Sleep (2000); //Simulate a lengthy operation return aNum1 + aNum2; } } class Program { static void Main (string[] args) { try { using (var serviceHost = new ServiceHost (typeof (Calculator))) { var httpBinding = new BasicHttpBinding (BasicHttpSecurityMode.None); serviceHost.AddServiceEndpoint (typeof (ICalculator), httpBinding, "http://172.16.9.191:2221/calc"); serviceHost.Open (); Console.WriteLine ("Service is running. ENJOY!!!"); Console.WriteLine ("Type 'stop' and hit enter to stop the service."); Console.ReadLine (); if (serviceHost.State == CommunicationState.Opened) serviceHost.Close (); } } catch (Exception e) { Console.WriteLine (e); Console.ReadLine (); } } } Also the WCF client program is: class Program { static int COUNT = 0; static Timer timer = null; static void Main (string[] args) { var threads = new Thread[10]; for (int i = 0; i < threads.Length; i++) { threads[i] = new Thread (Calculate); threads[i].Start (null); } timer = new Timer (o => Console.WriteLine ("Count: {0}", COUNT), null, 1000, 1000); Console.ReadLine (); timer.Dispose (); } static void Calculate (object state) { var c = new CalculatorClient ("BasicHttpBinding_ICalculator"); c.Open (); while (true) { try { var sum = c.Add (2, 3); Interlocked.Increment (ref COUNT); } catch (Exception ex) { Console.WriteLine ("Error on thread {0}: {1}", Thread.CurrentThread.Name, ex.GetType ()); break; } } c.Close (); } } Basically, I am creating 10 proxy clients and then repeatedly calling Add service method on separate threads. Now if I run both applications and observe opened TCP connections using netstat, I find that: If both client and server are running on same machine, number of tcp connections are equal to number of proxy objects. It means all requests are being served in parallel. Which is good. If I run server on a separate machine, I observed that maximum 2 TCP connections are opened regardless of the number of proxy objects I create. Only 2 requests run in parallel. It hurts the processing speed badly. If I switch to net.tcp binding, everything works fine (a separate TCP connection for each proxy object even if they are running on different machines). I am very confused and unable to make the basicHttpBinding use more TCP connections. I know it is a long question, but please help!

  Read the article

• Small performance test on a web service

  - by vtortola

  Hi, I'm trying to develop a small application that test how many requests per second can my service support but I think I'm doing something wrong. The service is in an early development stage, but I'd like to have this test handy in order to check in time to time I'm not doing something that decrease the performance. The problem is that I cannot get the web server or the database server go to the 100% of CPU. I'm using three different computers, in one is the web server (WinSrv Standard 2008 x64 IIS7), in other the database (Win 2K - SQL Server 2005) and the last is my computer (Win7 x64 ultimate), where I'll run the test. The computers are connected through a 100 ethernet switch. The request POST is 9 bytes and the response will be 842 bytes. The test launches several threads, and each thread has a "while" loop, in each loop it creates a WebRequest object, performs a call, increment a common counter and waits between 1 and 5 millisencods, then it do it again: static Int32 counter = 0; static void Main(string[] args) { ServicePointManager.DefaultConnectionLimit = 250; Console.WriteLine("Ready. Press any key..."); Console.ReadKey(); Console.WriteLine("Running..."); String localhost = "localhost"; String linuxmono = "192.168.1.74"; String server= "192.168.1.5:8080"; DateTime start = DateTime.Now; Random r = new Random(DateTime.Now.Millisecond); for (int i = 0; i < 50; i++) { new Thread(new ParameterizedThreadStart(Test)).Start(server); Thread.Sleep(r.Next(1, 3)); } Thread.Sleep(2000); while (true) { Console.WriteLine("Request per second :" + counter/DateTime.Now.Subtract(start).TotalSeconds ); Thread.Sleep(3000); } } public static void Test(Object ip) { Guid guid = Guid.NewGuid(); Random r = new Random(DateTime.Now.Millisecond); while (true) { String test = "<lalala/>"; WebRequest req = WebRequest.Create("http://" + (String)ip + "/WebApp/"+guid.ToString()+"/Data/Tables=whatever"); req.Method = "POST"; req.ContentType = "application/xml"; req.Credentials = new NetworkCredential("aaa", "aaa","domain"); Byte[] array = Encoding.UTF8.GetBytes(test); req.ContentLength = array.Length; using (Stream reqStream = req.GetRequestStream()) { reqStream.Write(array, 0, array.Length); reqStream.Close(); } using (Stream responseStream = req.GetResponse().GetResponseStream()) { String response = new StreamReader(responseStream).ReadToEnd(); if (response.Length != 842) Console.Write(" EEEE "); } Interlocked.Increment(ref counter); Thread.Sleep(r.Next(1,5)); } } If I run the test neither of the computers do an excesive CPU usage. Let's say I get a X requests per second, if I run the console application two times at the same moment, I get X/2 request per second in each one... but still the web server is on 30% of CPU, the database server on 25%... I've tried to remove the thread.sleep in the loop, but it doesn't make a big difference. I'd like to put the machines to the maximun, to check how may requests per second they can provide. I guessed that I could do it in this way... but apparently I'm missing something here... What is the problem? Kind regards.

  Read the article

• Mac 10.6 Universal Binary scipy: cephes/specfun "_aswfa_" symbol not found

  - by Markus

  Hi folks, I can't get scipy to function in 32 bit mode when compiled as a i386/x86_64 universal binary, and executed on my 64 bit 10.6.2 MacPro1,1. My python setup With the help of this answer, I built a 32/64 bit intel universal binary of python 2.6.4 with the intention of using the arch command to select between the architectures. (I managed to make some universal binaries of a few libraries I wanted using lipo.) That all works. I then installed scipy according to the instructions on hyperjeff's article, only with more up-to-date numpy (1.4.0) and skipping the bit about moving numpy aside briefly during the installation of scipy. Now, everything except scipy seems to be working as far as I can tell, and I can indeed select between 32 and 64 bit mode using arch -i386 python and arch -x86_64 python. The error Scipy complains in 32 bit mode: $ arch -x86_64 python -c "import scipy.interpolate; print 'success'" success $ arch -i386 python -c "import scipy.interpolate; print 'success'" Traceback (most recent call last): File "<string>", line 1, in <module> File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/interpolate/__init__.py", line 7, in <module> from interpolate import * File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/interpolate/interpolate.py", line 13, in <module> import scipy.special as spec File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/__init__.py", line 8, in <module> from basic import * File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/basic.py", line 8, in <module> from _cephes import * ImportError: dlopen(/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/_cephes.so, 2): Symbol not found: _aswfa_ Referenced from: /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/_cephes.so Expected in: flat namespace in /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/_cephes.so Attempt at tracking down the problem It looks like scipy.interpolate imports something called _cephes, which looks for a symbol called _aswfa_ but can't find it in 32 bit mode. Browsing through scipy's source, I find an ASWFA subroutine in specfun.f. The only scipy product file with a similar name is specfun.so, but both that and _cephes.so appear to be universal binaries: $ cd /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/ $ file _cephes.so specfun.so _cephes.so: Mach-O universal binary with 2 architectures _cephes.so (for architecture i386): Mach-O bundle i386 _cephes.so (for architecture x86_64): Mach-O 64-bit bundle x86_64 specfun.so: Mach-O universal binary with 2 architectures specfun.so (for architecture i386): Mach-O bundle i386 specfun.so (for architecture x86_64): Mach-O 64-bit bundle x86_64 Ho hum. I'm stuck. Things I may try but haven't figured out how yet include compiling specfun.so myself manually, somehow. I would imagine that scipy isn't broken for all 32 bit machines, so I guess something is wrong with the way I've installed it, but I can't figure out what. I don't really expect a full answer given my fairly unique (?) setup, but if anyone has any clues that might point me in the right direction, they'd be greatly appreciated. (edit) More details to address questions: I'm using gfortran (GNU Fortran from GCC 4.2.1 Apple Inc. build 5646). Python 2.6.4 was installed more-or-less like so: cd /tmp curl -O http://www.python.org/ftp/python/2.6.4/Python-2.6.4.tar.bz2 tar xf Python-2.6.4.tar.bz2 cd Python-2.6.4 # Now replace buggy pythonw.c file with one that supports the "arch" command: curl http://bugs.python.org/file14949/pythonw.c | sed s/2.7/2.6/ > Mac/Tools/pythonw.c ./configure --enable-framework=/Library/Frameworks --enable-universalsdk=/ --with-universal-archs=intel make -j4 sudo make frameworkinstall Scipy 0.7.1 was installed pretty much as described as here, but it boils down to a simple sudo python setup.py install. It would indeed appear that the symbol is undefined in the i386 architecture if you look at the _cephes library with nm, as suggested by David Cournapeau: $ nm -arch x86_64 /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/_cephes.so | grep _aswfa_ 00000000000d4950 T _aswfa_ 000000000011e4b0 d _oblate_aswfa_data 000000000011e510 d _oblate_aswfa_nocv_data (snip) $ nm -arch i386 /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/_cephes.so | grep _aswfa_ U _aswfa_ 0002e96c d _oblate_aswfa_data 0002e99c d _oblate_aswfa_nocv_data (snip) however, I can't yet explain its absence.

  Read the article

• Need help diagnosing network performance issues

  - by tokes

  I am currently working in a developing country as a system analyst for a government department. My area of expertise is software projects, but I've come across a few issues with the network setup in my office. (Unfortunately, being a developing country, there's not a lot of professional help available for this sort of thing.) Most recently, I am trying to diagnose a problem with slowness on the network. Our office is connected to the internet via an ADSL wireless modem/router (called Router). The modem is connected via ethernet to a switch (called Switch). The modem also acts as a wireless access point (called Wireless1), though because it is in a room at the end of the floor, it's range is limited. There are ethernet ports installed around the office. The cables of these all lead back to the same switch. In closer vicinity to the bulk of the client computers, there is another wireless router that acts as an access point for those clients (called Wireless2). That router is connected via ethernet to a wall port, and therefore to Switch. There is also a Windows server which acts as a DNS server (called DNSBox) which is located in the same room and is connected directly to Switch. ---Internet----------| Router/Wireless1 192.168.10.1 ---------------| |----|=========| DNSBox | |-------------------- 192.168.10.4 --------------------| Switch |---Other clients---- | |-------------------- |----|=========| Wireless2 ------------------| 192.168.10.198 One final thing to mention about the network setup. All clients are configured with manual IP addresses. Their router/gateway is set to the IP address of Router, and their DNS server is set to the IP address of DNSBox (with a secondary IP set to an external IP - that of our ISP's DNS server). Here are the symptoms we are experiencing: Clients connected to Wireless2 AP experience slow and unstable connections to the internet. (Slow here is defined as speeds of ~1KB/s, though ping response times seem to be as normal.) Clients connected via ethernet to Switch also experience the same slowness. Clients connected to Wireless1 AP (i.e. connecting via wireless directly to the ADSL modem) experience normal connections to the internet. Clients connected via ethernet to Router (i.e. connecting via ethernet directly to the ADSL modem) also experience normal connections to the internet. I also tried to gauge the connection performance between two machines on the network via ethernet: A file transfer between two clients who were both directly connected to Switch was the fastest; A file transfer between one client directly connected to Switch, and one client directly connected to Router (which is directly connected to Switch) performed much slower; A file transfer between two clients directly connected to Router also performed slowly. Things I have attempted to diagnose the problem: Restarted Switch -- no change. We tried unplugging ethernet jacks from Switch 4 at a time and testing the internet connection. The thought here was that perhaps a client on the network has contracted a virus, and is possibly spamming the network with traffic? (Not very technical, I know.) Unfortunately we couldn't get any significant increases in performance using this method. There were a couple of times when it seemed to be better, but then the connection speed quickly dropped back to slow/dead pace. I didn't want to unplug all jacks from Switch because I was concerned that users might be affected or that I would re-plug in the jacks incorrectly (should I even be worried about that? a port is a port on a switch, right?) I tried swapping the ethernet cable used to connect Router to Switch -- no change in performance. I tried swapping the port used on Switch for Router -- no change in performance. Anyone got any ideas on what this could be? Should I be mentioning specific brand names/models of the hardware used? Virii outbreaks are common in this country/office -- what could I be doing to figure out if a virus is at fault? If it is a virus, it doesn't seem to be generating a lot of traffic to/from the internet, because a) I can still get a good speed if I am directly connected to Router / Wireless1 and b) our ISP data usage has not risen suspiciously. Thanks for your help! Update #1 Here are the specs of some of the hardware: Switch is an Edimax ES3132RL 32-Port 10/100 Rackmount Switch Router is a D-Link DSL-G604T Update #2 I just tried unplugging everything except a laptop and Router from Switch. Speeds are still slow. I guess that means that Router / Switch are not being flooded? It seems more and more likely that the cause is something to do with the interaction between Router and Switch. However, I still can't find any useful resources on setting the LAN speed for either (and I'm not well-versed in these advanced networking configurations).

  Read the article

• how do I access XHR responseBody from Javascript?

  - by Cheeso

  I've got a web page that uses XMLHttpRequest to download a binary resource. Because it's binary I'm trying to use xhr.responseBody to access the bytes. I've seen a few posts suggesting that it's impossible to access the bytes directly from Javascript. This sounds crazy to me. Weirdly, xhr.responseBody is accessible from VBScript, so the suggestion is that I must define a method in VBScript in the webpage, and then call that method from Javascript. See jsdap for one example. var IE_HACK = (/msie/i.test(navigator.userAgent) && !/opera/i.test(navigator.userAgent)); if (IE_HACK) document.write('<script type="text/vbscript">\n\ Function BinaryToArray(Binary)\n\ Dim i\n\ ReDim byteArray(LenB(Binary))\n\ For i = 1 To LenB(Binary)\n\ byteArray(i-1) = AscB(MidB(Binary, i, 1))\n\ Next\n\ BinaryToArray = byteArray\n\ End Function\n\ </script>'); var xml = (window.XMLHttpRequest) ? new XMLHttpRequest() // Mozilla/Safari/IE7+ : (window.ActiveXObject) ? new ActiveXObject("MSXML2.XMLHTTP") // IE6 : null; // Commodore 64? xml.open("GET", url, true); if (xml.overrideMimeType) { xml.overrideMimeType('text/plain; charset=x-user-defined'); } else { xml.setRequestHeader('Accept-Charset', 'x-user-defined'); } xml.onreadystatechange = function() { if (xml.readyState == 4) { if (!binary) { callback(xml.responseText); } else if (IE_HACK) { // call a VBScript method to copy every single byte callback(BinaryToArray(xml.responseBody).toArray()); } else { callback(getBuffer(xml.responseText)); } } }; xml.send(''); Is this really true? The best way? copying every byte? For a large binary stream that's not gonna be very efficient. There is also a possible technique using ADODB.Stream, which is a COM equivalent of a MemoryStream. See here for an example. It does not require VBScript but does require a separate COM object. if (typeof (ActiveXObject) != "undefined" && typeof (httpRequest.responseBody) != "undefined") { // Convert httpRequest.responseBody byte stream to shift_jis encoded string var stream = new ActiveXObject("ADODB.Stream"); stream.Type = 1; // adTypeBinary stream.Open (); stream.Write (httpRequest.responseBody); stream.Position = 0; stream.Type = 1; // adTypeBinary; stream.Read.... /// ???? what here } I don't think that's gonna work - ADODB.Stream is disabled on most machines these days. In The IE8 developer tools - the IE equivalent of Firebug - I can see the responseBody is an array of bytes and I can even see the bytes themselves. The data is right there. I don't understand why I can't get to it. Is it possible for me to read it with responseText? hints? (other than defining a VBScript method)

  Read the article

• How to configure a WCF service to only accept a single client identified by a x509 certificate

  - by Johan Levin

  I have a WCF client/service app that relies on secure communication between two machines and I want to use use x509 certificates installed in the certificate store to identify the server and client to each other. I do this by configuring the binding as <security authenticationMode="MutualCertificate"/>. There is only client machine. The server has a certificate issued to server.mydomain.com installed in the Local Computer/Personal store and the client has a certificate issued to client.mydomain.com installed in the same place. In addition to this the server has the client's public certificate in Local Computer/Trusted People and the client has the server's public certificate in Local Computer/Trusted People. Finally the client has been configured to check the server's certificate. I did this using the system.servicemodel/behaviors/endpointBehaviors/clientCredentials/serviceCertificate/defaultCertificate element in the config file. So far so good, this all works. My problem is that I want to specify in the server's config file that only clients that identify themselves with the client.mydomain.com certificate from the Trusted People certificate store are allowed to connect. The correct information is available on the server using the ServiceSecurityContext, but I am looking for a way to specify in app.config that WCF should do this check instead of my having to check the security context from code. Is that possible? Any hints would be appreciated. By the way, my server's config file looks like this so far: <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.serviceModel> <services> <service name="MyServer.Server" behaviorConfiguration="CertificateBehavior"> <endpoint contract="Contracts.IMyService" binding="customBinding" bindingConfiguration="SecureConfig"> </endpoint> <host> <baseAddresses> <add baseAddress="http://localhost/SecureWcf"/> </baseAddresses> </host> </service> </services> <behaviors> <serviceBehaviors> <behavior name="CertificateBehavior"> <serviceCredentials> <serviceCertificate storeLocation="LocalMachine" x509FindType="FindBySubjectName" findValue="server.mydomain.com"/> </serviceCredentials> </behavior> </serviceBehaviors> </behaviors> <bindings> <customBinding> <binding name="SecureConfig"> <security authenticationMode="MutualCertificate"/> <httpTransport/> </binding> </customBinding> </bindings> </system.serviceModel> </configuration>

  Read the article

• Windows 7 Machine Makes Router Drop -All- Wireless Connections

  - by Hammer Bro.

  Some background: My home network consists of my Desktop, a two-month old Windows 7 (x64) machine which is online most frequently (N-spec), as well as three other Windows XP laptops (all G) that only connect every now and then (one for work, one for Netflix, and the other for infrequent regular laptop uses). I used to have a Belkin F5D8236-4 wireless router, and everything worked great. A week ago, however, I found out that the Belkin absolutely in no way would establish a VPN connection, something that has become important for work. So I bought a Netgear WNR3500v2/U/L. The wireless was acting a little sketchy at first for just the Windows 7 machine, but I thought it had something to do with 802.11N and I was in a hurry so I just fished up an ethernet cable and disabled the computer's wireless. It has now become apparent, though, that whenever the Windows 7 machine is connected to the router, all wireless connections become unstable. I was using my work laptop for a solid six hours today with no trouble, having multiple SSH connections open over VPN and streaming internet radio in the background. Then, within two minutes of turning on this Windows 7 box, I had lost all connectivity over the wireless. And I was two feet away from the router. The same sort of thing happens on all of the other laptops -- Netflix can be playing stuff all weekend, but if I come up here and do things on this (W7) computer, the streaming will be dead within ten minutes. So here are my basic observations: If the Windows 7 machine is off, then all connections will have a Signal Strength of Very Good or Excellent and a Speed of 48-54 Mbps for an indefinite amount of time. Shortly after the Windows 7 machine is turned on, all wireless connections will experience a consistent decline in Speed down to 1.0 Mbps, eventually losing their connection entirely. These machines will continue to maintain 70% signal strength, as observed by themselves and router. Once dropped, a wireless connection will have difficulty reconnecting. And, if a connection manages to become established, it will quickly drop off again. The Windows 7 machine itself will continue to function just fine if it's using a wired connection, although it will experience these same issues over the wireless. All of the drivers and firmwares are up to date, and this happened both with the stock Netgear firmware as well as the (current) DD-WRT. What I've tried: Making sure each computer is being assigned a distinct IP. (They are.) Disabling UPnP and Stateful Packet Inspection on the router. Disabling Network Sharing, SSDP Discovery, TCP/IP NetBios Helper and Computer Browser services on the Windows 7 machine. Disabling QoS Packet Scheduler, IPv6, and Link Layer Topology Discovery options on my ethernet controller (leaving only Client for Microsoft Networks, File and Printer Sharing, and IPv4 enabled). What I think: It seems awfully similar to the problems discussed in detail at http://social.msdn.microsoft.com/Forums/en/wsk/thread/1064e397-9d9b-4ae2-bc8e-c8798e591915 (which was both the most relevant and concrete information I could dig up on the internet). I still think that something the Windows 7 IP stack (or just Operating System itself) is doing is giving the router fits. However, I could be wrong, because I have two key differences. One is that most instances of this problem are reported as the entire router dying or restarting, and mine still works just fine over the wired connection. The other is that it's a new router, tested with both the factory firmware and the (I assume) well-maintained DD-WRT project. Even if Windows 7 is still secretly sending IPv6 packets or the TCP Window Scaling implementation that I hear Vista caused some trouble with (even though I've tried my best to disable anything fancy), this router should support those functions. I don't want to get a new or a replacement router unless someone can convince me that this is a defective unit. But the problem seems too specific and predictable by my instincts to be a hardware hiccup. And I don't want to deal with the inevitable problems that always seem to take half a day to resolve when getting a new router, since I'm frantically working (including tomorrow) to complete a project by next week's deadline. Plus, I think in the worst case scenario, I could keep this router connected directly to the modem, disable its wireless entirely, and connect the old Belkin to it directly. That should allow me to still use VPN (although I'll have to plug my work laptop directly into that router), and then maintain wireless connections for all of the other computers. But that feels so wrong to me. Anyone have any ideas what the cause and possible solution could be? Clarifications: The Windows 7 machine is directly connected via an ethernet cable to the router for everything above. But while it is online, all other computers' wireless connections become unusable. It is not an issue of signal strength or interference -- no other devices within scanning range are using Channel 1, and the problem will affect computers that are literally feet away from the router with 95% signal strength.

  Read the article

• People Picker can't find Forms Authentication Users in WSS 3.0

  - by beyti

  I used a lot of tutorials to turn my windows authenticated default wss web app to use Forms Authentication. What I've done since; 1. created a web app. and a site in wss 3.0. Made its anonymous access enabled for all site content. This wss app is in the "wss3" server. 2. created a membership db with regsql.exe in .net framework folder.Created it with its default settings, like aspnetdb named database.This db is in the "sqlserver" server. 3. gave db.owner permission to the web app. admin of wss to the aspnetdb database. The user is registered under the same domain as the sql and the wss machines. 4. configured site's web.config file with following changes/adds: ..added the connectionString: <connectionStrings> <clear /> <add name="LocalSqlServer" connectionString="server=sqlserver;database=aspnetdb; Integrated Security=SSPI" providerName="System.Data.SqlClient" /> </connectionStrings> ..added the membershipProvider: <membership> <providers> <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="LocalSqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" /> </providers> </membership> ..also checked the peoplepicker settings: <PeoplePickerWildcards> <clear /> <add key="AspNetSqlMembershipProvider" value="%" /> </PeoplePickerWildcards> 5. After all, I changed the application provider of the site I created to use forms. Gave it the provider name of "AspNetSqlMembershipProvider". 6. I've created some users for Forms Authentication via ASP.net Configuration page by visual studio. 7. Checked the users in the db aspnetdb. They are there. 8. Tried to login to wss with one of them. Successfully logged in. With no privilages ofcourse. 9. Tried to give permission via Web Application Policy to that user which logged in. 10. People Picker couldn't find it at all. Any of the forms users couldn't be found. But it clearly tells that AD connection is also changed that none of the AD users couldn't be found either. It seems I'm missing something to configure about people picker. Any help would be appreciated. Thanks in advance. Beytan

  Read the article

• Ivy resolve not working with dynamic artifact

  - by richever

  I've been using Ivy a bit but I seem to still have a lot to learn. I have two projects. One is a web app and the other is a library upon which the web app depends. The set up is that the library project is compiled to a jar file and published using Ivy to a directory within the project. In the web app build file, I have an ant target that calls the Ivy resolve ant task. What I'd like to do is have the web app using the dynamic resolve mode during development (on developer's local machines) and default resolve mode for test and production builds. Previously I was appending a time stamp to the library archive file so that Ivy would notice changes in file when the web app tried to resolve its dependency on it. Within Eclipse this is cumbersome because, in the web app, the project had to be refreshed and the build path tweaked every time a new library jar was published. Publishing a similarly named jar file every time would, I figure, only require developers to refresh the project. The problem is that the web app is unable to retrieve the dynamic jar file. The output I get looks something like this: resolve: [ivy:configure] :: Ivy 2.1.0 - 20090925235825 :: http://ant.apache.org/ivy/ :: [ivy:configure] :: loading settings :: file = /Users/richard/workspace/webapp/web/WEB-INF/config/ivy/ivysettings.xml [ivy:resolve] :: resolving dependencies :: com.webapp#webapp;[email protected] [ivy:resolve] confs: [default] [ivy:resolve] found com.webapp#library;latest.integration in local [ivy:resolve] :: resolution report :: resolve 142ms :: artifacts dl 0ms --------------------------------------------------------------------- | | modules || artifacts | | conf | number| search|dwnlded|evicted|| number|dwnlded| --------------------------------------------------------------------- | default | 1 | 0 | 0 | 0 || 0 | 0 | --------------------------------------------------------------------- [ivy:resolve] [ivy:resolve] :: problems summary :: [ivy:resolve] :::: WARNINGS [ivy:resolve] :::::::::::::::::::::::::::::::::::::::::::::: [ivy:resolve] :: UNRESOLVED DEPENDENCIES :: [ivy:resolve] :::::::::::::::::::::::::::::::::::::::::::::: [ivy:resolve] :: com.webapp#library;latest.integration: impossible to resolve dynamic revision [ivy:resolve] :::::::::::::::::::::::::::::::::::::::::::::: [ivy:resolve] :::: ERRORS [ivy:resolve] impossible to resolve dynamic revision for com.webapp#library;latest.integration: check your configuration and make sure revision is part of your pattern [ivy:resolve] [ivy:resolve] :: USE VERBOSE OR DEBUG MESSAGE LEVEL FOR MORE DETAILS BUILD FAILED /Users/richard/workspace/webapp/build.xml:71: impossible to resolve dependencies: resolve failed - see output for details The web app resolve target looks like this: <target name="resolve" depends="load-ivy"> <ivy:configure file="${ivy.dir}/ivysettings.xml" /> <ivy:resolve file="${ivy.dir}/ivy.xml" resolveMode="${ivy.resolve.mode}"/> <ivy:retrieve pattern="${lib.dir}/[artifact]-[revision].[ext]" type="jar" sync="true" /> </target> In this case, ivy.resolve.mode has a value of 'dynamic' (without quotes). The web app's Ivy file is simple. It looks like this: <ivy-module version="2.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://ant.apache.org/ivy/schemas/ivy.xsd"> <info organisation="com.webapp" module="webapp"/> <dependencies> <dependency name="library" rev="${ivy.revision.default}" revConstraint="${ivy.revision.dynamic}" /> </dependencies> </ivy-module> During development, ivy.revision.dynamic has a value of 'latest.integration'. While, during production or test, 'ivy.revision.default' has a value of '1.0'. Any ideas? Please let me know if there's any more information I need to supply. Thanks!

  Read the article

• Modern Java alternatives

  - by Ralph

  I'm not sure if stackoverflow is the best forum for this discussion. I have been a Java developer for 14 years and have written an enterprise-level (~500,000 line) Swing application that uses most of the standard library APIs. Recently, I have become disappointed with the progress that the language has made to "modernize" itself, and am looking for an alternative for ongoing development. I have considered moving to the .NET platform, but I have issues with using something the only runs well in Windows (I know about Mono, but that is still far behind Microsoft). I also plan on buying a new Macbook Pro as soon as Apple releases their new rumored Arrandale-based machines and want to develop in an environment that will feel "at home" in Unix/Linux. I have considered using Python or Ruby, but the standard Java library is arguably the largest of any modern language. In JVM-based languages, I looked at Groovy, but am disappointed with its performance. Rumor has it that with the soon-to-be released JDK7, with its InvokeDynamic instruction, this will improve, but I don't know how much. Groovy is also not truly a functional language, although it provides closures and some of the "functional" features on collections. It does not embrace immutability. I have narrowed my search down to two JVM-based alternatives: Scala and Clojure. Each has its strengths and weaknesses. I am looking for the stackoverflow readerships' opinions. I am not an expert at either of these languages; I have read 2 1/2 books on Scala and am currently reading Stu Halloway's book on Clojure. Scala is strongly statically typed. I know the dynamic language folks claim that static typing is a crutch for not doing unit testing, but it does provide a mechanism for compile-time location of a whole class of errors. Scala is more concise than Java, but not as much as Clojure. Scala's inter-operation with Java seems to be better than Clojure's, in that most Java operations are easier to do in Scala than in Clojure. For example, I can find no way in Clojure to create a non-static initialization block in a class derived from a Java superclass. For example, I like the Apache commons CLI library for command line argument parsing. In Java and Scala, I can create a new Options object and add Option items to it in an initialization block as follows (Java code): final Options options = new Options() { { addOption(new Option("?", "help", false, "Show this usage information"); // other options } }; I can't figure out how to the same thing in Clojure (except by using (doit...)), although that may reflect my lack of knowledge of the language. Clojure's collections are optimized for immutability. They rarely require copy-on-write semantics. I don't know if Scala's immutable collections are implemented using similar algorithms, but Rich Hickey (Clojure's inventor) goes out of his way to explain how that language's data structures are efficient. Clojure was designed from the beginning for concurrency (as was Scala) and with modern multi-core processors, concurrency takes on more importance, but I occasionally need to write simple non-concurrent utilities, and Scala code probably runs a little faster for these applications since it discourages, but does not prohibit, "simple" mutability. One could argue that one-off utilities do not have to be super-fast, but sometimes they do tasks that take hours or days to complete. I know that there is no right answer to this "question", but I thought I would open it up for discussion. If anyone has a suggestion for another JVM-based language that can be used for enterprise level development, please list it. Also, it is not my intent to start a flame war. Thanks, Ralph

  Read the article

• Preloading Winforms using a Stack and Hidden Form

  - by msarchet

  I am currently working on a project where we have a couple very control heavy user controls that are being used inside a MDI Controller. This is a Line of Business app and it is very data driven. The problem that we were facing was the aforementioned controls would load very very slowly, we dipped our toes into the waters of multi-threading for the control loading but that was not a solution for a plethora of reasons. Our solution to increasing the performance of the controls ended up being to 'pre-load' the forms onto a hidden window, create a stack of the existing forms, and pop off of the stack as the user requested a form. Now the current issue that I'm seeing that will arise as we push this 'fix' out to our testers, and the ultimately our users is this: Currently the 'hidden' window that contains the preloaded forms is visible in task manager, and can be shut down thus causing all of the controls to be lost. Then you have to create them on the fly losing the performance increase. Secondly, when the user uses up the stack we lose the performance increase (current solution to this is discussed below). For the first problem, is there a way to hide this window from task manager, perhaps by creating a parent form that encapsulates both the main form for the program and the hidden form? Our current solution to the second problem is to have an inactivity timer that when it fires checks the stacks for the forms, and loads a new form onto the stack if it isn't full. However this still has the potential of causing a hang in the UI while it creates the forms. A possible solutions for this would be to put 'used' forms back onto the stack, but I feel like there may be a better way. EDIT: For control design clarification From the comments I have realized there is a lack of clarity on what exactly the control is doing. Here is a detailed explanation of one of the controls. I have defined for this control loading time as the time it takes from when a user performs an action that would open a control, until the time a control is accessible to be edited. The control is for entering Prescriptions for a patient in the system, it has about 5 tabbed groups with a total of about 180 controls. The user selects to open a new Prescription control from inside the main program, this control is loaded into the MDI Child area of the Main Form (which is a DevExpress Ribbon Control). From the time the user clicks New (or loads an existing record) until the control is visible. The list of actions that happens in the program is this: The stack is checked for the existence of a control. If the control exists it is popped off of the stack. The control is rendered on screen. This is what takes 2 seconds The control then is populated with a blank object, or with existing data. The control is ready to use. The average percentage of loading time, across about 10 different machines, with different hardware the control rendering takes about 85 - 95 percent of the control loading time. Without using the stack the control takes about 2 seconds to load, with the stack it takes about .8 seconds, this second time is acceptable. I have looked at Henry's link and I had previously already implemented the applicable suggestions. Again I re-iterate my question as What is the best method to move controls to and from the stack with as little UI interruption as possible?

  Read the article

• why i7-860 is two times slower than E3-1220?

  - by javapowered

  I have financical trading software. It decodes fast/fix messages. I'm running same binaries on two different machines on very similar set of data. Software receive "messages" and decodes them. The general rule - longer message takes more time to decode: i7-860, Windows 7: Debug 18:23:48.8047325 count=51 decoding take microseconds = 300 Debug 18:23:49.7287854 count=53 decoding take microseconds = 349 Debug 18:23:49.7397860 count=110 decoding take microseconds = 516 Debug 18:23:49.7497866 count=92 decoding take microseconds = 512 Debug 18:23:49.7597872 count=49 decoding take microseconds = 267 Debug 18:23:49.7717878 count=194 decoding take microseconds = 823 Debug 18:23:49.7797883 count=49 decoding take microseconds = 296 Debug 18:23:49.7997894 count=50 decoding take microseconds = 299 Debug 18:23:50.7328428 count=101 decoding take microseconds = 583 Debug 18:23:50.7418433 count=42 decoding take microseconds = 281 Debug 18:23:50.7538440 count=151 decoding take microseconds = 764 Debug 18:23:50.7618445 count=57 decoding take microseconds = 279 Debug 18:23:50.7738452 count=122 decoding take microseconds = 712 Debug 18:23:50.8028468 count=52 decoding take microseconds = 281 Debug 18:23:51.7389004 count=137 decoding take microseconds = 696 Debug 18:23:51.7499010 count=100 decoding take microseconds = 485 Debug 18:23:51.7689021 count=185 decoding take microseconds = 872 Debug 18:23:51.8079043 count=49 decoding take microseconds = 315 Debug 18:23:52.7349573 count=90 decoding take microseconds = 532 Debug 18:23:52.7439578 count=53 decoding take microseconds = 277 Debug 18:23:52.7539584 count=134 decoding take microseconds = 623 Debug 18:23:52.7629589 count=47 decoding take microseconds = 294 Debug 18:23:52.7749596 count=198 decoding take microseconds = 868 Debug 18:23:52.8039613 count=52 decoding take microseconds = 291 Debug 18:23:53.7400148 count=132 decoding take microseconds = 666 Debug 18:23:53.7480153 count=81 decoding take microseconds = 430 Debug 18:23:53.7570158 count=49 decoding take microseconds = 301 Debug 18:23:53.7710166 count=156 decoding take microseconds = 752 Debug 18:23:53.7770169 count=45 decoding take microseconds = 270 Debug 18:23:54.7350717 count=108 decoding take microseconds = 578 Debug 18:23:54.7430722 count=52 decoding take microseconds = 286 Debug 18:23:54.7540728 count=138 decoding take microseconds = 567 Debug 18:23:54.7760741 count=160 decoding take microseconds = 753 Debug 18:23:54.8030756 count=53 decoding take microseconds = 292 Debug 18:23:55.7411293 count=110 decoding take microseconds = 629 Debug 18:23:55.7481297 count=48 decoding take microseconds = 294 Debug 18:23:55.7591303 count=84 decoding take microseconds = 386 Debug 18:23:55.7701309 count=90 decoding take microseconds = 484 Debug 18:23:55.7801315 count=120 decoding take microseconds = 527 Debug 18:23:55.8101332 count=53 decoding take microseconds = 290 Debug 18:23:56.7341861 count=121 decoding take microseconds = 667 Debug 18:23:56.7421865 count=53 decoding take microseconds = 293 Debug 18:23:56.7531872 count=127 decoding take microseconds = 586 Debug 18:23:56.7621877 count=58 decoding take microseconds = 306 Debug 18:23:56.7751884 count=138 decoding take microseconds = 649 Debug 18:23:56.8021900 count=53 decoding take microseconds = 288 Debug 18:23:57.7392436 count=139 decoding take microseconds = 699 Debug 18:23:57.7502442 count=121 decoding take microseconds = 548 Debug 18:23:57.7582446 count=61 decoding take microseconds = 301 Debug 18:23:57.7692453 count=98 decoding take microseconds = 500 Debug 18:23:57.7792458 count=94 decoding take microseconds = 460 Debug 18:23:57.8092476 count=41 decoding take microseconds = 274 Xeon E3-1220, Windows Server 2008 R2 foundation: Debug 18:28:57.5087967 count=117 decoding take microseconds = 255 Debug 18:28:57.5087967 count=85 decoding take microseconds = 187 Debug 18:28:57.5087967 count=55 decoding take microseconds = 155 Debug 18:28:57.5243967 count=86 decoding take microseconds = 189 Debug 18:28:57.5243967 count=53 decoding take microseconds = 139 Debug 18:28:57.5243967 count=52 decoding take microseconds = 153 Debug 18:28:57.5243967 count=55 decoding take microseconds = 146 Debug 18:28:57.5243967 count=103 decoding take microseconds = 239 Debug 18:28:57.5243967 count=83 decoding take microseconds = 182 Debug 18:28:57.5243967 count=85 decoding take microseconds = 180 Debug 18:28:57.5243967 count=80 decoding take microseconds = 202 Debug 18:28:57.5243967 count=58 decoding take microseconds = 135 Debug 18:28:57.5243967 count=55 decoding take microseconds = 140 Debug 18:28:57.5243967 count=81 decoding take microseconds = 183 Debug 18:28:57.5243967 count=74 decoding take microseconds = 172 Debug 18:28:57.5243967 count=80 decoding take microseconds = 174 Debug 18:28:57.5243967 count=88 decoding take microseconds = 175 Debug 18:28:57.5243967 count=55 decoding take microseconds = 131 Debug 18:28:57.5243967 count=80 decoding take microseconds = 182 Debug 18:28:57.5243967 count=80 decoding take microseconds = 183 Debug 18:28:57.5243967 count=101 decoding take microseconds = 231 Debug 18:28:57.5243967 count=58 decoding take microseconds = 134 Debug 18:28:57.5243967 count=57 decoding take microseconds = 126 Debug 18:28:57.5243967 count=57 decoding take microseconds = 134 Debug 18:28:57.5399967 count=115 decoding take microseconds = 234 Debug 18:28:57.5399967 count=106 decoding take microseconds = 225 Debug 18:28:57.5399967 count=108 decoding take microseconds = 241 Debug 18:28:57.5399967 count=84 decoding take microseconds = 177 Debug 18:28:57.5399967 count=54 decoding take microseconds = 141 Debug 18:28:57.5399967 count=84 decoding take microseconds = 186 Debug 18:28:57.5399967 count=82 decoding take microseconds = 184 Debug 18:28:57.5399967 count=82 decoding take microseconds = 179 Debug 18:28:57.5399967 count=56 decoding take microseconds = 133 Debug 18:28:57.5399967 count=57 decoding take microseconds = 127 Debug 18:28:57.5399967 count=82 decoding take microseconds = 185 Debug 18:28:57.5399967 count=76 decoding take microseconds = 178 Debug 18:28:57.5399967 count=82 decoding take microseconds = 184 Debug 18:28:57.5399967 count=54 decoding take microseconds = 139 Debug 18:28:57.5399967 count=54 decoding take microseconds = 137 Debug 18:28:57.5399967 count=81 decoding take microseconds = 184 Debug 18:28:57.5399967 count=136 decoding take microseconds = 275 Debug 18:28:57.5399967 count=55 decoding take microseconds = 138 Debug 18:28:57.5555968 count=52 decoding take microseconds = 140 Debug 18:28:57.5555968 count=53 decoding take microseconds = 136 Debug 18:28:57.5555968 count=54 decoding take microseconds = 139 Debug 18:28:57.5555968 count=55 decoding take microseconds = 138 Debug 18:28:57.5555968 count=57 decoding take microseconds = 134 Debug 18:28:57.5555968 count=53 decoding take microseconds = 136 Debug 18:28:57.5555968 count=80 decoding take microseconds = 174 Debug 18:28:57.5555968 count=74 decoding take microseconds = 175 Debug 18:28:57.5555968 count=57 decoding take microseconds = 133 Debug 18:28:57.5555968 count=57 decoding take microseconds = 149 Debug 18:28:57.5555968 count=100 decoding take microseconds = 262 Debug 18:28:57.5555968 count=56 decoding take microseconds = 156 Debug 18:28:57.5555968 count=55 decoding take microseconds = 165 From this test I see that E3-1220 is almost two times faster than i7-860. Is that possible? Because in the processors ratings these processors are about the same. Is it possible that this is because of cache or something? And if so which processor I better to buy to decode messages two more times faster?

  Read the article

• Exchange 2010 PST-Export fails

  - by Chake

  I'm horribly failing at exporting Exchnange Mailboxes to PST files. Perhaps You are able to help me? The System I'm running some legacy machines here. The one I'm currently working on (CurrentDC) is a Windows 2008 R2 Server with Exchange 2010 on it. Exchange seems to be poorly patched: [PS] C:\>get-exchangeserver Name Site ServerRole Edition AdminDisplayVersion ---- ---- ---------- ------- ------------------- OldDC None Enterprise Version 6.5 (Bui... CurrentDC company.local Mailbox,... Enterprise Version 14.0 (Bu... The Problem After some trouble I managed to get the Export-Mailbox command run: [PS] C:\>Export-Mailbox -Identity marco -PSTFolderPath C:\ExchangeExport According to several Websites that seems to be the right command to export the mailbox of the user "marco" to "C:\ExchangeExport". But after running the command an error occurs (I'm sorry, it is the german version of Windows 2008 - but if you translate Fehler with error and Vorgang with process you should be prepared enough to go ;)) [PS] C:\Export-Mailbox -Identity marco -PSTFolderPath C:\ExchangeExport Fehler für Marco S ([email protected]). Ursache: Fehler bei diesem Vorgang., Fehlercode: -2147467259. + CategoryInfo : InvalidOperation: (0:Int32) [Export-Mailbox], RecipientTaskException + FullyQualifiedErrorId : 2317FD3A,Microsoft.Exchange.Management.RecipientTasks.ExportMailbox RunspaceId : 44415363-371e-44a1-a682-61e6a9b90c86 Identity : company.local/Company User/Marco S DistinguishedName : CN=Marco S,OU=Company User,DC=company,DC=local DisplayName : Marco S Alias : marco LegacyExchangeDN : /o=Erste Organisation/ou=Erste administrative Gruppe/cn=Recipients/cn=marco PrimarySmtpAddress : [email protected] SourceServer : CurrentDC.company.local SourceDatabase : Mailbox Database 0279110169 SourceGlobalCatalog : CurrentDC SourceDomainController : TargetGlobalCatalog : CurrentDC TargetDomainController : TargetMailbox : TargetServer : TargetDatabase : MailboxSize : 0 B (0 bytes) IsResourceMailbox : False SIDUsedInMatch : SMTPProxies : SourceManager : SourceDirectReports : SourcePublicDelegates : SourcePublicDelegatesBL : SourceAltRecipient : SourceAltRecipientBL : SourceDeliverAndRedirect : MatchedTargetNTAccountDN : IsMatchedNTAccountMailboxEnabled : MatchedContactsDNList : TargetNTAccountDNToCreate : TargetManager : TargetDirectReports : TargetPublicDelegates : TargetPublicDelegatesBL : TargetAltRecipient : TargetAltRecipientBL : TargetDeliverAndRedirect : Options : Default SourceForestCredential : TargetForestCredential : TargetFolder : PSTFilePath : C:\ExchangeExport\marco.pst RecoveryMailboxGuid : RecoveryMailboxLegacyExchangeDN : RecoveryMailboxDisplayName : RecoveryDatabaseGuid : StandardMessagesDeleted : 0 AssociatedMessagesDeleted : 0 DumpsterMessagesDeleted : 0 MoveType : ExportToPST MoveStage : Validation StartTime : 05.10.2012 13:55:46 EndTime : 05.10.2012 13:55:46 StatusCode : -2147467259 StatusMessage : Fehler bei diesem Vorgang. ReportFile : C:\Program Files\Microsoft\Exchange Server\V14\Logging\MigrationLogs\export-Mailbox20121005-135545-8170000.xml ServerName : CurrentDC.company.local What I have done Well, I must say I'm quite clueless. I was wondering why MailboxSize is 0 - so I checked it: [PS] C:\>Get-MailboxStatistics marco | ft DisplayName, TotalItemSize, ItemCount DisplayName TotalItemSize ItemCount ----------- ------------- --------- Marco S 473 MB (496,011,572 bytes) 4173 Well, this i not 0 bytes - but I don't know what to do with this information. Also I had a look at the ReportFile mentioned in the output: <?xml version="1.0"?> <export-Mailbox> <TaskHeader> <RunningAs>NT-AUTORITÄT\SYSTEM</RunningAs> <Name>export-Mailbox</Name> <Type>ExportToPST</Type> <MaxBadItems>0</MaxBadItems> <Version>14.0.639.21</Version> <StartTime>10.05.2012 14:19:12</StartTime> <Options Identity="marco" PSTFolderPath="C:\ExchangeExport" DeleteContent="False" DeleteAssociatedMessages="False" GlobalCatalog="CurrentDC" MaxThreads="4" BadItemLimit="0" ValidateOnly="False" IncludeFolders="" ExcludeFolders="" StartDate="01.01.0001 00:00:00" EndDate="31.12.9999 23:59:59" SubjectKeywords="" ContentKeywords="" AllContentKeywords="" AttachmentFilenames="" SenderKeywords="" RecipientKeywords="" Locale="" /> </TaskHeader> <TaskDetails> <Item MailboxName="Marco S"> <Source> <Identity>company.local/Company User/Marco S</Identity> <DistinguishName>CN=Marco Sc,OU=Company User,DC=company,DC=local</DistinguishName> <DisplayName>Marco S</DisplayName> <Alias>marco</Alias> <LegacyExchangeDN>/o=Erste Organisation/ou=Erste administrative Gruppe/cn=Recipients/cn=marco</LegacyExchangeDN> <PrimarySmtpAddress>[email protected]</PrimarySmtpAddress> <SourceServer>CurrentDC.company.local</SourceServer> <SourceDatabase>Mailbox Database 0279110169</SourceDatabase> <IsResourceMailbox>False</IsResourceMailbox> <SourceGlobalCatalog>CurrentDC</SourceGlobalCatalog> </Source> <Target> <PSTFilePath>C:\ExchangeExport\marco.pst</PSTFilePath> </Target> <MailboxSize>0 B (0 bytes)</MailboxSize> <Duration>00:00:00</Duration> <Result IsWarning="False" ErrorCode="-2147467259">Fehler bei diesem Vorgang.</Result> </Item> </TaskDetails> <TaskFooter> <EndTime>10.05.2012 14:19:13</EndTime> <TotalSize>0 B (0 bytes)</TotalSize> <StandardMessagesDeleted>0</StandardMessagesDeleted> <AssociatedMessagesDeleted>0</AssociatedMessagesDeleted> <DumpsterMessagesDeleted>0</DumpsterMessagesDeleted> <Result ErrorCount="1" CompletedCount="0" WarningCount="0" /> </TaskFooter> </export-Mailbox> Do you have any clue? <UPDATE> Regarding to the answer from downthepub I tried to use UNC paths - no change. Also I tried installing the management tools to a client and run the scripts from there - no way, too. </UPDATE> Thanks a lot for reading this mess!

  Read the article

• arp problems with transparent bridge on linux

  - by Mink

  I've been trying to secure my virtual machines on my esx server by putting them behind a transparent bridge with 2 interfaces, one in front, one at the back. My intention is to put all the firewall rules in one place (instead of on each virtual server). I've been using as bridge a blank new virtual machine based on arch linux (but I suspect it doesn't matter which brand of linux it is). What I have is 2 virtual switchs (thus two Virtual Network, VN_front and VN_back), each with 2 types of ports (switched/separated or promiscious/where the machine can see all packets). On my bridge machine, I've set up 2 virtual NIC, one on VN_front, one on VN_back, both in promisc mode. I've created a bridge br0 with both NIC in it: brctl addbr br0 brctl stp br0 off brctl addif br0 front_if brctl addif br0 back_if Then brought them up: ifconfig front_if 0.0.0.0 promisc ifconfig back_if 0.0.0.0 promisc ifconfig br0 0.0.0.0 (I use promisc mode, because I'm not sure I can do without, thinking that maybe the packets don't reach the NICs) Then I took one of my virtual server sitting on VN_front, and plugged it to VN_back instead (that's the nifty use case I'm thinking about, being able to move my servers around just by changing the VN they are plugged into, without changing anything in the configuration). Then I looked into the macs "seen" by my addressless bridge using brctl showmacs br0 and it did show my server from both sides: I get something that looks like this : port no mac addr is local? ageing timer 2 00:0c:29:e1:54:75 no 9.27 1 00:0c:29:fd:86:0c no 9.27 2 00:50:56:90:05:86 no 73.38 1 00:50:56:90:05:88 no 0.10 2 00:50:56:90:05:8b yes 0.00 << FRONT VN 1 00:50:56:90:05:8c yes 0.00 << BACK VN 2 00:50:56:90:19:18 no 13.55 2 00:50:56:90:3c:cf no 13.57 the thing is that the server that are plugged in front/back are not shown on the correct port. I suspect some horrible thing happening in the ARP-world... :-/ If I ping from a front virtual server to a back virtual server, I can only see the back machine if that back machine pings something in the front. As soon as I stop the ping from the back machine, the ping from the front machine stops getting through... I've noticed that if the back machine pings, then its port on the bridge is the correct one... I've tried to play with the arp_ switch of /proc/sys, but with no clear effect on the end result... /proc/sys/net/ipv4/ip_forward doesn't seem to be of any use when using a bridge (seems it's all taken care of by brctl) /proc/sys/net/ipv4/conf//arp_ don't seem to change much either... (tried arp_announce to 2 or 8 - like suggested elsewhere - and arp_ignore to 0 or 1 ) All the examples I've seen have a different subnet on either side like 10.0.1.0/24 and 10.0.2.0/24... In my case I want 10.0.1.0/24 on both side (just like a transparent switch - except it's a hidden fw ). Turning stp on/off doesn't seem to have any impact on my issue. It's as if the arp packets where getting through the bridge, corrupting the other side with false data... I've tried to use the -arp on each interface, br0, front, back... it breaks the thing altogether... I suspect it has something to do with both side being on the same subnet... I've thought about putting all my machine behind the fw, so as to have all the same subnet at the back... but I'm stuck with my provider's gateway standing at the front with part of my subnet (in fact 3 appliance to route the whole subnet), so I'll always have ips from the same subnet on both side, whatever I do... (I'm using fixed front IPs on my delegated subnet). I'm at a loss... -_-'' Thx for your help. (As anyone tried something like this? from within ESXi?) (It's not just a stunt, the idea is to have something like fail2ban running on some servers, sending their banned IP to the bridge/fw so that it too could ban them - saving all the other servers from that same attacker in one go, allowing for some honeypot that would trigger the fw from any kind of suitable response, and stuffs of the sort... I am aware I could use something like snort, but it addresses some completely different kind of problems, in a completely different way... )

  Read the article

• Ruby Rails Mongrel Sever failing to serve OXS1.6

  - by Mark V

  Hi there I'm fairly new to Rails and the Mac, and doing my first deploy... I'm trying to set up my rails app on a brand new Apple mini-server running OXS1.6 (Snow Leopard). It is currently running fine on my new iMac i7 (same OS). I start mongrel with this command: mongrel_rails start -e production -p 3000 -d -a 127.0.0.1 --debug And it starts giving this output in the log/mongrel.log ** Daemonized, any open files are closed. Look at log/mongrel.pid and log/mongrel.log for info. ** Starting Mongrel listening at 127.0.0.1:3000 ** Installing debugging prefixed filters. Look in log/mongrel_debug for the files. ** Starting Rails with production environment... /Library/Ruby/Gems/1.8/gems/rails-2.3.5/lib/rails/gem_dependency.rb:119:Warning: Gem::Dependency#version_requirements is deprecated and will be removed on or after August 2010. Use #requirement /Users/danadmin/ServiceApp/ServiceApp/app/helpers/input_grid_manager.rb:9: warning: already initialized constant ID_PREFIX /Users/danadmin/ServiceApp/ServiceApp/app/helpers/input_grid_manager.rb:10: warning: already initialized constant ADD_ID ** Rails loaded. ** Loading any Rails specific GemPlugins ** Signals ready. TERM => stop. USR2 => restart. INT => stop (no restart). ** Rails signals registered. HUP => reload (without restart). It might not work well. ** Mongrel 1.1.5 available at 127.0.0.1:3000 ** Writing PID file to log/mongrel.pid The output is the same on my dev iMac (including the warnings). The difference is that accessing http://127.0.0.1:3000 on my iMac serves up the app's login page. Where as on the mac mini-server accessing the same results in this error 500 text from mongrel: "We're sorry, but something went wrong." It's as if rails is not working. I'm pretty good at figuring things out if I have some log file messages to direct me, but mongrel.log has no error message (the output remains the same as above), and the log/production.log is empty (which makes me think rails has not started?). My gems are all the same versions between machines and so is the app code; and there are no clues I can see in any of the mongrel_debug logs, except that rails.log on the mac mini-server and the iMac are different. After a start and single access, first is the rails.log from the mac mini-server: D, [2010-04-15T13:45:34.870406 #6914] DEBUG -- : TRACING ON Thu Apr 15 13:45:34 +1200 2010 Thu Apr 15 13:46:08 +1200 2010 REQUEST / --- !map:Mongrel::HttpParams SERVER_NAME: 127.0.0.1 HTTP_ACCEPT: application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 HTTP_CACHE_CONTROL: max-age=0 HTTP_HOST: 127.0.0.1:3000 HTTP_USER_AGENT: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_0; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.9 Safari/533.2 REQUEST_PATH: / SERVER_PROTOCOL: HTTP/1.1 HTTP_ACCEPT_LANGUAGE: en-US,en;q=0.8 REMOTE_ADDR: 127.0.0.1 PATH_INFO: / SERVER_SOFTWARE: Mongrel 1.1.5 SCRIPT_NAME: / HTTP_VERSION: HTTP/1.1 REQUEST_URI: / SERVER_PORT: "3000" HTTP_ACCEPT_CHARSET: ISO-8859-1,utf-8;q=0.7,*;q=0.3 REQUEST_METHOD: GET GATEWAY_INTERFACE: CGI/1.2 HTTP_ACCEPT_ENCODING: gzip,deflate,sdch HTTP_CONNECTION: keep-alive While on my iMac it seems the same except for the addition of the HTTP_COOKIE and the HTTP_IF_NONE_MATCH, here is rails.log from my iMac # Logfile created on Thu Apr 15 13:41:42 +1200 2010 by logger.rb/22285 D, [2010-04-15T13:41:42.934088 #2070] DEBUG -- : TRACING ON Thu Apr 15 13:41:42 +1200 2010 Thu Apr 15 13:42:05 +1200 2010 REQUEST / --- !map:Mongrel::HttpParams SERVER_NAME: 127.0.0.1 HTTP_ACCEPT: application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 HTTP_HOST: 127.0.0.1:3000 HTTP_USER_AGENT: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.9 Safari/533.2 REQUEST_PATH: / SERVER_PROTOCOL: HTTP/1.1 HTTP_IF_NONE_MATCH: "\"216cc63ce3c1f286ef8dd4f18f354f6e\"" HTTP_ACCEPT_LANGUAGE: en-US,en;q=0.8 REMOTE_ADDR: 127.0.0.1 PATH_INFO: / SERVER_SOFTWARE: Mongrel 1.1.5 SCRIPT_NAME: / HTTP_COOKIE: _ServiceApp_session=BAh7DDonY3VzdG9tZXJfbGlzdF9maWx0ZXJfam9iX3N0YXR1c19pZGn6Og9zZXNzaW9uX2lkIiU0ZTk1ZWZjMmViMGU3NjE2YzA0NDc2YTkxYzJlNDZiOToaY3VycmVudF9jdXN0b21lcl9uYW1lIilUSEUgQ1VTVE9NRVIgTkFNRSBORUVEUyBUTyBCRSBMT0FERUQ6EF9jc3JmX3Rva2VuIjFuT1JMUWk0NlZrWlM3c2lUN3BaWCs5NkhRajhxYnFwRnhzVHVTWXEvUWY0PToZam9iX2xpc3RfZmlsdGVyX3RleHQiADogam9iX2xpc3RfZmlsdGVyX2VtcGxveWVlX2lkafo6HmN1c3RvbWVyX2xpc3RfZmlsdGVyX3RleHQiAA%3D%3D--d01bc5d0b457ad524d16cb3402b5dfed9afce83d HTTP_VERSION: HTTP/1.1 REQUEST_URI: / SERVER_PORT: "3000" HTTP_ACCEPT_CHARSET: ISO-8859-1,utf-8;q=0.7,*;q=0.3 REQUEST_METHOD: GET GATEWAY_INTERFACE: CGI/1.2 HTTP_ACCEPT_ENCODING: gzip,deflate,sdch HTTP_CONNECTION: keep-alive Any direction or ideas would be greatly appreciated. Thanks.

  Read the article

• Spotlight Infinite Indexing issue (external data drive)

  - by Manca Weeks

  This is an external drive, formerly a boot drive which is now in use only to access music files (sibelius, audio, midi, live, logic etc.) without transferring the data into a new boot system, partly because of the issue I am about to describe, but mostly because the majority of the data is mainly there for archival purposes. The user is a composer and prominent musician and needs to be able to rehash the data at will. I have tried several things - here is a list: - make complete filesystem clone with antonio diaz's ddrescue - run Disk Warrior on copy, repair whatever errors occurred - wipe out all ACLs on entire drive - set all permissions to the same value - wide open 777 - remove any system data (applications, system files, including hidden files to the best of my knowledge) by selecting only non-system/app data and using Carbon Copy Cloner to put only the data of interest onto a newly formatted drive - transfer data to newly formatted drive folder by folder, resetting the spotlight index in between adding each to observe for issues (interesting here is that no issues occurred except for in Documents folder - when I transferred only the Documents folder to a newly formatted drive on its own - no trouble. It appears almost as thought it may not be the content but the quantity or specific combination of data that results in problems) - use DataRescue to transfer the data to yet another newly formatted drive to expose any missed hidden files Between each of the above steps I stopped Spotlight (search for anything beginning with md in Activity Monitor - All Processes and quitting it), deleted the .Spotlight-V100 directory from the affected drive. Restart Splotlight indexing by adding drive to Spotlight privacy list and removing it. In each case the same issue occurs - Spotlight begins indexing normally (or so it seems), then the index estimated time increases, usually to 4 hours remaining. This is where it gets stuck and continues to predict 4 hours remaining but never finishes. Sometimes I can't eject the drive and have to quit the md.. processes from Activity Monitor to be able to eject the drive without Force Eject. Once I disconnect the drive after the 4 hours remaining situation - if I reattach it, Spotlight forever estimates remaining time and never gets going again. So there it is. It is apparently not a filesystem issue, not a permissions issue and not tied to any particular piece of hardware or protocol (used USB and FW drives). I have tried this on several machines (3 to be precise) and in 10.5.8 and 10.6.5. Simply disabling Spotlight on this volume is not an option because the owner has no clue where things are as the data on the volume dates back to music projects and compositions from 2003 and before. He needs to be able to query for results. Anyone got any ideas? ---update 2-6-11 Since I have not received any responses except the one below which appears to misunderstand my point, I am updating this post hoping to get more responses. I have used the terminal command sudo opensnoop -p PID where PID is the mdworker process ID to try and determine what Spotlight is doing and hopefully find the files it's having trouble with. Here's what happens: After indexing for a few hours, mdworker is gone. It no longer shows up in Activity Monitor under "All Processes" and the Terminal window with the opensnoop result stops moving. I then proceeded to execute the same command on mds to see what it was doing and here's what I get, repeatedly: 501 57 mds 21 / 501 57 mds 21 /Volumes/Sno Leppard 501 57 mds 21 /Volumes/Tiger 501 57 mds 21 /Volumes/Leppard 501 57 mds 21 /Volumes/Disk Warrior 501 57 mds 21 /Volumes/ONM Data These represent all the volumes currently mounted in the system. All except ONM Data, which is the one I am trying to index, are excluded from SPotlight indexing at the moment. The sequence above repeats over and over, with slight variation, sometimes skipping one of the volumes. Questions - what happened to mdworker? What is mds doing? I will let this run until tomorrow morning and throughout the day and monitor for any changes. Any input would be very much appreciated. Even if you're not sure what the ultimate answer is, please alert me to anything you think I may be missing. Hopefully at some point we will figure this out... Thanks, M __final edit__ I finally resolved the issue and here is how I did it. I used the terminal command "sudo opensnoop -p PID" where the PID is the process id of the processes I was monitoring. I was looking at all instances of mds and mdworker running in the system. After the third time through indexing the same data set (see info above), I contacted Apple and got to their highest level of support - they were flabbergasted as well. They advised me to install yet another default 10.6.6 system and try again. The same pattern repeated - mds and mdworker(s) would start indexing and eventually the spotlight icon would say 6 hours remaining and all mdworkers were gone, mds at 90% or so of CPU. But I did finally figure out that the first time mdworker stopped like that, the last file it touched was always in the same folder. I excluded that folder from spotlight search and the rest of the data set indexed within about 2 hours with no strange behavior or failures. I copied that folder to another machine and Spotlight barfed immediately. Exclude that folder and all is well again. I have no clue what is causing this behavior, still, but I did find a functional solution to the problem. Anyone with a similar problem - run opensnoop on all instances of mds and mdworker and wait patiently for wdworker to exit. Look at the last file it touched and exclude the enclosing folder from being indexed. I was able to repeat the issue and solution on 2 different installs and 2 different copies of the data set. Hope this helps. If we find an actual cause of the folder being such a problem (it is called MICHAEL BRECKER RECORD SOLOS and contains almost 1 GB of audio related files - performer, live, SD2 - things like that), I will edit again to let you all know. Thanks for ay attempts to help, M

  Read the article

• What is Causing this IIS 7 Web Service Sporadic Connectivity Error?

  - by dpalau

  On sporadic occasions we receive the following error when attempting to call an .asmx web service from a .Net client application: "The underlying connection was closed: A connection that was expected to be kept alive was closed by the server. Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host." By sporadic I mean that it might occur zero, once every few days, or a half-dozen times a day for some users. It will never occur for the first web service call of a user. And the subsequent (usually the same) call will always work immediately after the failure. The failures happen across a variety of methods in the service and usually happens between 15-20 seconds (according to the log) from the time of the request. Looking in the IIS site log for the particular call will show one or the other of the following windows error codes: 121: The semaphore timeout period has elapsed. 1236: The network connection was aborted by the local system. Some additional environment details: Running on internal network web farm consisting of two servers running IIS7 on Windows Server 2008 OS. These problems did not occur when running in an older IIS6 web farm of three servers running on Windows Server 2003 (and we use a single IIS6/2003 instance for our development and staging environments with no issues). EDIT: Also, all of these server instances are VMWare virtual machines, not sure if that is a surprise anymore or not. The web service is a .Net 2.0/3.5 compiled .asmx web service that has its own application pool (.Net 2.0, integrated pipeline). Only has Windows Authentication enabled. We have another web service on the farm that uses the same physical path as the primary service, the only difference being that Basic Authentication is enabled. This is used for a portion of our ERP system. Have tried using the same and different application pool - no effect on the error. This site isn't hit as often as the primary site and has never had an error. As mentioned, the error will only happen when called from the .Net client - not from other applications. The client application is always creating a new web service object for each request and setting the service credentials to System.Net.CredentialCache.DefaultCredentials. The application is either deployed locally to a client or run in a Citrix server session. Those users running in Citrix doesn't seem to experience the issue, only locally deployed clients. The Citrix servers and the web farm are located in the same physical location and are located in the same IP range (10.67.xx.xx). Locally deployed clients experiencing the error are located elsewhere (10.105.xx.xx, 10.31.xx.xx). I've checked the OS logs to see if I can see any problems but nothing really sticks out. EDIT: Actually, I myself just ran into the error a little bit ago. I decided to check out the logs again and saw that there was a Security log entry of "Audit Failure" at the 'same' time (IIS log entry at 1:39:59, event log entry at 1:39:50). Not sure if this is a coincidence or not, I'll have to check out the logs of previous errors. I'm probably grasping for straws but the details: Log Name: Security Source: Microsoft-Windows-Security-Auditing Date: 7/8/2009 1:39:50 PM Event ID: 5159 Task Category: Filtering Platform Connection Level: Information Keywords: Audit Failure User: N/A Computer: is071019.<**.net Description: The Windows Filtering Platform has blocked a bind to a local port. Application Information: Process ID: 1260 Application Name: \device\harddiskvolume1\windows\system32\svchost.exe Network Information: Source Address: 0.0.0.0 Source Port: 54802 Protocol: 17 Filter Information: Filter Run-Time ID: 0 Layer Name: Resource Assignment Layer Run-Time ID: 36 I've also tried to use Failed Request Tracing in IIS7 but the service call never actually gets to where FRT can capture it (even though the failure is logged in the web service log). The network infrastructure group said they checked out the DNS and any NIC settings are correct so there is no 'flapping'. Everything pans out. I'm not sure that they checked out any domain controller servers though to see if that could be an issue. Any ideas? Or any other debugging strategies to get to the bottom of this? I'm just the developer in charge of the software and don't really have the knowledge on what to investigate from the networking side of things - although it does sound like a networking issue to me based on what is happening. Thanks in advance for any help.

  Read the article

• Is SHA-1 secure for password storage?

  - by Tgr

  Some people throw around remarks like "SHA-1 is broken" a lot, so I'm trying to understand what exactly that means. Let's assume I have a database of SHA-1 password hashes, and an attacker whith a state of the art SHA-1 breaking algorithm and a botnet with 100,000 machines gets access to it. (Having control over 100k home computers would mean they can do about 10^15 operations per second.) How much time would they need to find out the password of any one user? find out the password of a given user? find out the password of all users? find a way to log in as one of the users? find a way to log in as a specific user? How does that change if the passwords are salted? Does the method of salting (prefix, postfix, both, or something more complicated like xor-ing) matter? Here is my current understanding, after some googling. Please correct in the answers if I misunderstood something. If there is no salt, a rainbow attack will immediately find all passwords (except extremely long ones). If there is a sufficiently long random salt, the most effective way to find out the passwords is a brute force or dictionary attack. Neither collision nor preimage attacks are any help in finding out the actual password, so cryptographic attacks against SHA-1 are no help here. It doesn't even matter much what algorithm is used - one could even use MD5 or MD4 and the passwords would be just as safe (there is a slight difference because computing a SHA-1 hash is slower). To evaluate how safe "just as safe" is, let's assume that a single sha1 run takes 1000 operations and passwords contain uppercase, lowercase and digits (that is, 60 characters). That means the attacker can test 1015*60*60*24 / 1000 ~= 1017 potential password a day. For a brute force attack, that would mean testing all passwords up to 9 characters in 3 hours, up to 10 characters in a week, up to 11 characters in a year. (It takes 60 times as much for every additional character.) A dictionary attack is much, much faster (even an attacker with a single computer could pull it off in hours), but only finds weak passwords. To log in as a user, the attacker does not need to find out the exact password; it is enough to find a string that results in the same hash. This is called a first preimage attack. As far as I could find, there are no preimage attacks against SHA-1. (A bruteforce attack would take 2160 operations, which means our theoretical attacker would need 1030 years to pull it off. Limits of theoretical possibility are around 260 operations, at which the attack would take a few years.) There are preimage attacks against reduced versions of SHA-1 with negligible effect (for the reduced SHA-1 which uses 44 steps instead of 80, attack time is down from 2160 operations to 2157). There are collision attacks against SHA-1 which are well within theoretical possibility (the best I found brings the time down from 280 to 252), but those are useless against password hashes, even without salting. In short, storing passwords with SHA-1 seems perfectly safe. Did I miss something?

  Read the article

• Windows 7 Machine Makes Router Drop -All- Wireless Connections [closed]

  - by Hammer Bro.

  Note: I accidentally originally posted this question over at SuperUser, and I still think the issue is caused by some low-level networking practice of Windows 7, but I think the expertise here would be more apt to figuring it out. Apologies for the cross-post. Some background: My home network consists of my Desktop, a two-month old Windows 7 (x64) machine which is online most frequently (N-spec), as well as three other Windows XP laptops (all G) that only connect every now and then (one for work, one for Netflix, and the other for infrequent regular laptop uses). I used to have a Belkin F5D8236-4 wireless router, and everything worked great. A week ago, however, I found out that the Belkin absolutely in no way would establish a VPN connection, something that has become important for work. So I bought a Netgear WNR3500v2/U/L. The wireless was acting a little sketchy at first for just the Windows 7 machine, but I thought it had something to do with 802.11N and I was in a hurry so I just fished up an ethernet cable and disabled the computer's wireless. It has now become apparent, though, that whenever the Windows 7 machine is connected to the router, all wireless connections become unstable. I was using my work laptop for a solid six hours today with no trouble, having multiple SSH connections open over VPN and streaming internet radio in the background. Then, within two minutes of turning on this Windows 7 box, I had lost all connectivity over the wireless. And I was two feet away from the router. The same sort of thing happens on all of the other laptops -- Netflix can be playing stuff all weekend, but if I come up here and do things on this (W7) computer, the streaming will be dead within ten minutes. So here are my basic observations: If the Windows 7 machine is off, then all connections will have a Signal Strength of Very Good or Excellent and a Speed of 48-54 Mbps for an indefinite amount of time. Shortly after the Windows 7 machine is turned on, all wireless connections will experience a consistent decline in Speed down to 1.0 Mbps, eventually losing their connection entirely. These machines will continue to maintain 70% signal strength, as observed by themselves and router. Once dropped, a wireless connection will have difficulty reconnecting. And, if a connection manages to become established, it will quickly drop off again. The Windows 7 machine itself will continue to function just fine if it's using a wired connection, although it will experience these same issues over the wireless. All of the drivers and firmwares are up to date, and this happened both with the stock Netgear firmware as well as the (current) DD-WRT. What I've tried: Making sure each computer is being assigned a distinct IP. (They are.) Disabling UPnP and Stateful Packet Inspection on the router. Disabling Network Sharing, SSDP Discovery, TCP/IP NetBios Helper and Computer Browser services on the Windows 7 machine. Disabling QoS Packet Scheduler, IPv6, and Link Layer Topology Discovery options on my ethernet controller (leaving only Client for Microsoft Networks, File and Printer Sharing, and IPv4 enabled). What I think: It seems awfully similar to the problems discussed in detail at http://social.msdn.microsoft.com/Forums/en/wsk/thread/1064e397-9d9b-4ae2-bc8e-c8798e591915 (which was both the most relevant and concrete information I could dig up on the internet). I still think that something the Windows 7 IP stack (or just Operating System itself) is doing is giving the router fits. However, I could be wrong, because I have two key differences. One is that most instances of this problem are reported as the entire router dying or restarting, and mine still works just fine over the wired connection. The other is that it's a new router, tested with both the factory firmware and the (I assume) well-maintained DD-WRT project. Even if Windows 7 is still secretly sending IPv6 packets or the TCP Window Scaling implementation that I hear Vista caused some trouble with (even though I've tried my best to disable anything fancy), this router should support those functions. I don't want to get a new or a replacement router unless someone can convince me that this is a defective unit. But the problem seems too specific and predictable by my instincts to be a hardware hiccup. And I don't want to deal with the inevitable problems that always seem to take half a day to resolve when getting a new router, since I'm frantically working (including tomorrow) to complete a project by next week's deadline. Plus, I think in the worst case scenario, I could keep this router connected directly to the modem, disable its wireless entirely, and connect the old Belkin to it directly. That should allow me to still use VPN (although I'll have to plug my work laptop directly into that router), and then maintain wireless connections for all of the other computers. But that feels so wrong to me. Anyone have any ideas what the cause and possible solution could be? Clarifications: The Windows 7 machine is directly connected via an ethernet cable to the router for everything above. But while it is online, all other computers' wireless connections become unusable. It is not an issue of signal strength or interference -- no other devices within scanning range are using Channel 1, and the problem will affect computers that are literally feet away from the router with 95% signal strength.

  Read the article

• Print driver installs failing

  - by Kasius

  All of the Windows 7 64-bit Enterprise machines in my organization are failing to install a good number of printer drivers that previously installed without issue. This only happens with printer drivers. And not with all printer drivers. Just some. Network drivers, video drivers, etc. have had no problems. Here is part of setupapi.dev.log for a Dymo LabelWriter printer driver that is failing to install: dvi: {Plug and Play Service: Device Install for USBPRINT\DYMOLABELWRITER_450_TURBO\6&538F51D&0&USB001} ump: Creating Install Process: DrvInst.exe 09:36:58.071 ndv: Infpath=C:\Windows\INF\oem0.inf ndv: DriverNodeName=dymo.inf:DYMO.NTamd64.6.0:LW_450_TURBO_VISTA:8.1.0.363:usbprint\dymolabelwriter_450_aa08 ndv: DriverStorepath=C:\Windows\System32\DriverStore\FileRepository\dymo.inf_amd64_neutral_3a631b118b7a5828\dymo.inf ndv: Building driver list from driver node strong name... dvi: Searching for hardware ID(s): dvi: usbprint\dymolabelwriter_450_aa08 dvi: dymolabelwriter_450_aa08 inf: Opened PNF: 'C:\Windows\System32\DriverStore\FileRepository\dymo.inf_amd64_neutral_3a631b118b7a5828\dymo.inf' ([strings]) dvi: Selected driver installs from section [LW_450_TURBO_VISTA] in 'c:\windows\system32\driverstore\filerepository\dymo.inf_amd64_neutral_3a631b118b7a5828\dymo.inf'. dvi: Class GUID of device changed to: {4d36e979-e325-11ce-bfc1-08002be10318}. dvi: Set selected driver complete. ndv: {Core Device Install} 09:36:58.133 inf: Opened INF: 'C:\Windows\INF\oem0.inf' ([strings]) inf: Saved PNF: 'C:\Windows\INF\oem0.PNF' (Language = 0409) dvi: {DIF_ALLOW_INSTALL} 09:36:58.164 dvi: Using exported function 'ClassInstall32' in module 'C:\Windows\system32\ntprint.dll'. dvi: Class installer == ntprint.dll,ClassInstall32 dvi: No CoInstallers found dvi: Class installer: Enter 09:36:58.164 dvi: Class installer: Exit dvi: Default installer: Enter 09:36:58.180 dvi: Default installer: Exit dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 09:36:58.180 ndv: Installing files... dvi: {DIF_INSTALLDEVICEFILES} 09:36:58.180 dvi: Class installer: Enter 09:36:58.180 inf: Opened INF: 'C:\Windows\System32\DriverStore\FileRepository\dymo.inf_amd64_neutral_3a631b118b7a5828\dymo.inf' ([strings]) inf: Opened INF: 'C:\Windows\System32\DriverStore\FileRepository\dymo.inf_amd64_neutral_3a631b118b7a5828\dymo.inf' ([strings]) !!! dvi: Class installer: failed(0x00000490)! !!! dvi: Error 1168: Element not found. dvi: {DIF_INSTALLDEVICEFILES - exit(0x00000490)} 09:37:22.063 ndv: Device install status=0x00000490 ndv: Performing device install final cleanup... ! ndv: Queueing up error report since device installation failed... ndv: {Core Device Install - exit(0x00000490)} 09:37:22.063 dvi: {DIF_DESTROYPRIVATEDATA} 09:37:22.063 dvi: Class installer: Enter 09:37:22.063 dvi: Class installer: Exit dvi: Default installer: Enter 09:37:22.063 dvi: Default installer: Exit dvi: {DIF_DESTROYPRIVATEDATA - exit(0xe000020e)} 09:37:22.063 ump: Server install process exited with code 0x00000490 09:37:22.063 ump: {Plug and Play Service: Device Install exit(00000490)} Notice these lines in particular: !!! dvi: Class installer: failed(0x00000490)! !!! dvi: Error 1168: Element not found. dvi: {DIF_INSTALLDEVICEFILES - exit(0x00000490)} 09:37:22.063 ndv: Device install status=0x00000490 From what I have read, the "Element not found" error should be accompanied by an event describing what element was not found. The error that appears in Device Manager is "The driver cannot be installed because it is either not digitally signed or not signed in the appropriate manner." It appears to be signed fine though. It has an accompanying .CAT file and worked previously. And when installing, the following messages are logged in setupapi.dev.log: sto: {DRIVERSTORE_IMPORT_NOTIFY_VALIDATE} 09:36:56.277 inf: Opened INF: 'C:\Windows\System32\DriverStore\Temp\{272e2305-961c-7942-9ede-966f01047043}\dymo.inf' ([strings]) sig: {_VERIFY_FILE_SIGNATURE} 09:36:56.292 sig: Key = dymo.inf sig: FilePath = C:\Windows\System32\DriverStore\Temp\{272e2305-961c-7942-9ede-966f01047043}\dymo.inf sig: Catalog = C:\Windows\System32\DriverStore\Temp\{272e2305-961c-7942-9ede-966f01047043}\DYMO.CAT sig: Success: File is signed in catalog. sig: {_VERIFY_FILE_SIGNATURE exit(0x00000000)} 09:36:56.355 sto: Validating driver package files against catalog 'DYMO.CAT'. sto: Driver package is valid. sto: {DRIVERSTORE_IMPORT_NOTIFY_VALIDATE exit(0x00000000)} 09:36:56.402 sto: Verified driver package signature: sto: Digital Signer Score = 0x0D000005 sto: Digital Signer Name = Microsoft Windows Hardware Compatibility Publisher Now here's where it gets strange. If I take it off the domain, it installs fine. But it doesn't seem to have anything to do with Group Policy. I moved the machine to an OU that blocks inheritance, ran a gpupdate, ran rsop.msc to verify, and tried again. And it still didn't work. Likewise, I removed a machine from the domain, manually set all of the domain Group Policy settings in gpedit.msc, and tried that way, and it worked fine. So it seems like the Group Policy settings are irrelevant. What other domain-related issue could be causing this though? Any ideas on what to try next would be greatly appreciated. I'm not sure where to go from here. Thanks!

  Read the article

• using PixelBender to double the size of a bitmap

  - by jedierikb

  I have a performance question about pixel bender. I want to enlarge many BitmapData (double their size into new BitmapData). I was doing this with as3, but wanted to use pixel bender to get better performance. On my machines, I get great comparative performance out of many pixel bender demonstrations. To my surprise (or bad coding / understanding), I am getting much worse performance out of pixel bender -- 2 seconds to do 3000 scalings vs .5 seconds! I expected to get at least the same performance as as3. What am I doing wrong? I got the straightforward pixel bender code here (and it is included below for easy reference). package { import aCore.aUtil.timingUtils; import flash.display.BitmapData; import flash.display.Shader; import flash.display.ShaderJob; import flash.display.Sprite; import flash.display.StageAlign; import flash.display.StageScaleMode; import flash.events.Event; import flash.geom.Matrix; public class flashFlash extends Sprite { [Embed ( source="pixelbender/bilinearresample.pbj", mimeType="application/octet-stream" ) ] private static var BilinearScaling:Class; public function flashFlash( ):void { stage.align = StageAlign.TOP_LEFT; stage.scaleMode = StageScaleMode.NO_SCALE; addEventListener( Event.ENTER_FRAME, efCb, false, 0, true ); } private function efCb( evt:Event ):void { removeEventListener( Event.ENTER_FRAME, efCb, false ); traceTime( "init" ); var srcBmd:BitmapData = new BitmapData( 80, 120, false, 0 ); var destBmd:BitmapData = new BitmapData( 160, 240, false, 0 ); var mx:Matrix = new Matrix( ); mx.scale( 2, 2 ); for (var i:uint = 0; i < 3000; i++) { destBmd.draw( srcBmd, mx ); } traceTime( "scaled with as3" ); // create and configure a Shader object var shader:Shader = new Shader( ); shader.byteCode = new BilinearScaling( ); shader.data.scale.value = [2]; shader.data.src.input = srcBmd; for (var j:uint = 0; j < 3000; j++) { var shaderJob:ShaderJob = new ShaderJob( ); shaderJob.shader = shader; shaderJob.target = destBmd; shaderJob.start( true ); } traceTime( "scaled with pixel bender bilinearresample.pbj" ); } private static var _lastTraceTime:Number = new Date().getTime(); public static function traceTime( note:String ):Number { var nowTime:Number = new Date().getTime(); var diff:Number = (nowTime-_lastTraceTime); trace( "[t" + diff + "] " + note ); _lastTraceTime = nowTime; return diff; } } } And the pixel bender code: <languageVersion : 1.0;> kernel BilinearResample < namespace : "com.brooksandrus.pixelbender"; vendor : "Brooks Andrus"; version : 1; description : "Resizes an image using bilinear resampling. Constrains aspect ratio - divide Math.max( input.width / output.width, input.height / output.height ) and pass in to the scale parameter"; > { parameter float scale < minValue: 0.0; maxValue: 1000.0; defaultValue: 1.0; >; input image4 src; output pixel4 dst; void evaluatePixel() { // scale should be Math.max( src.width / output.width, src.height / output.height ) dst = sampleLinear( src, outCoord() * scale ); // bilinear scaling } }

  Read the article

• Strange error with VS2008 on Windows 7

  - by Christian

  We have a solution with two projects, one of them is a Silverlight 3 application which is embedded on the other ASP.NET MVC project. Just recently an error started to appear which makes the build fail. Here is the output: `------ Build started: Project: DotCoquiMap, Configuration: Debug Any CPU ------ C:\Program Files\MSBuild\Microsoft\Silverlight\v3.0\Microsoft.Ria.Client.targets : warning : Could not find necessary input file 'C:\Users\Michael\Documents\DotCoqui\trunk\DotCoquiMap\Bin\Debug\DotCoquiMap.dll'. Done building project "DotCoquiMap.csproj" -- FAILED. ------ Build started: Project: DotCoquiProject, Configuration: Debug Any CPU ------ C:\Windows\Microsoft.NET\Framework\v3.5\Csc.exe /noconfig /nowarn:1701,1702 /errorreport:prompt /warn:4 /define:DEBUG;TRACE /reference:C:\Users\Michael\Documents\DotCoqui\trunk\DotCoquiMap\Bin\Debug\DotCoquiMap.dll /reference:..\ExternalLibraries\itextsharp.dll /reference:..\ExternalLibraries\MvcMembership.dll /reference:..\ExternalLibraries\PagedList.dll /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Configuration.dll /reference:"C:\Program Files\Reference Assemblies\Microsoft\Framework\v3.5\System.Core.dll" /reference:"C:\Program Files\Reference Assemblies\Microsoft\Framework\v3.5\System.Data.DataSetExtensions.dll" /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Data.dll /reference:"C:\Program Files\Reference Assemblies\Microsoft\Framework\v3.5\System.Data.Linq.dll" /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.dll /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Drawing.dll /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.EnterpriseServices.dll /reference:"C:\Program Files\Reference Assemblies\Microsoft\Framework\v3.5\System.Web.Abstractions.dll" /reference:............\Windows\assembly\GAC_MSIL\System.Web.DataVisualization\3.5.0.0__31bf3856ad364e35\System.Web.DataVisualization.dll /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Web.dll /reference:"C:\Program Files\Reference Assemblies\Microsoft\Framework\v3.5\System.Web.Extensions.dll" /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Web.Mobile.dll /reference:"C:\Program Files\Microsoft ASP.NET\ASP.NET MVC 1.0\Assemblies\System.Web.Mvc.dll" /reference:"C:\Program Files\Reference Assemblies\Microsoft\Framework\v3.5\System.Web.Routing.dll" /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Web.Services.dll /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Xml.dll /reference:"C:\Program Files\Reference Assemblies\Microsoft\Framework\v3.5\System.Xml.Linq.dll" /debug+ /debug:full /optimize- /out:obj\Debug\DotCoquiProject.dll /target:library Controllers\AccountController.cs Controllers\AdministrationController.cs Controllers\ApiController.cs Controllers\CampaignsCategoriesController.cs Controllers\CampaignsController.cs Controllers\CampaignsFormViewModel.cs Controllers\CampaignStatisticsController.cs Controllers\CampaignStatisticsDetailsViewModel.cs Controllers\ControllerHelpers.cs Controllers\CountriesController.cs Controllers\ErrorController.cs Controllers\HomeController.cs Controllers\MapController.cs Controllers\MediaController.cs Controllers\MediaViewModel.cs Controllers\NewsController.cs Controllers\OrganizationsController.cs Controllers\OrgCenterController.cs Controllers\UserAdministrationController.cs Default.aspx.cs Global.asax.cs Models\Campaigns.cs Models\CategoriesRuleValidation.cs Models\DotCoquiDBModel.designer.cs Models\DotCoquiRepository.cs Models\DQcodes.cs Models\FileRepository.cs Models\ISmtpClient.cs Models\JsonModels.cs Models\OrgCenter\IndexViewModel.cs Models\SmtpClientProxy.cs Models\Statistic.cs Models\User.cs Models\UserAdministration\DetailsViewModel.cs Models\UserAdministration\IndexViewModel.cs Models\UserAdministration\RoleViewModel.cs Properties\AssemblyInfo.cs error CS0006: Metadata file 'C:\Users\Michael\Documents\DotCoqui\trunk\DotCoquiMap\Bin\Debug\DotCoquiMap.dll' could not be found Compile complete -- 1 errors, 0 warnings ========== Build: 0 succeeded or up-to-date, 2 failed, 0 skipped ==========` And here is the errors / warnings: Warning 2 Could not find necessary input file 'C:\Users\Michael\Documents\DotCoqui\trunk\DotCoquiMap\Bin\Debug\DotCoquiMap.dll'. DotCoquiMap Error 1 Metadata file 'C:\Users\Michael\Documents\DotCoqui\trunk\DotCoquiMap\Bin\Debug\DotCoquiMap.dll' could not be found DotCoquiProject The DotCoquiMap is not getting built therefore the DotCoquiProject (ASP.NET MVC) cannot find the .dll. Now here is the really odd thing, under Windows XP the very same code compiles and runs perfectly.... under windows 7 it gives us these errors. It is the very same code, we have tested it on 3 different Win7 machines to no avail. Help will be really really helpful. Thanks in advance.

  Read the article

< Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >