Search Results

Search found 5762 results on 231 pages for 'clients'.

Page 222/231 | < Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >

• SVN: Release branch headaches, how to merge in website revisions as and when cleared to go live?

  - by Pete Duncanson

  I need a sanity check here if we can, any ideas on correcting/changing the following are very welcome! We've been getting ourselves in knots of late with our SVN and are trying to correct it by putting a Trunk/Release system in place. We have a large website that we develop on and we store it all in SVN. Heres what we had in mind: We have trunk and a release branch All work gets checked into Trunk. When a feature is deemed ready for the next release it is merged into a Release branch. We only have one release branch and just tag "Latest" when we do a push to live We hope to be able to get all the files changed from Latest to Head to give us a zip that we can upload (any ideas on an easy way to do this via scripting?) So we set all this up and where very happy with ourselves. Except its not working and heres why. We work on lots a different features/fixes/problems at once and they don't all get nicely checked in feature complete (but always working at least). Then sometimes you have to wait for Clients to sign off. As a result you end up with revisions which are "ready for live" being scattered with ones which are "still being worked on" in trunk. That means that the completed revisions are not getting merged in sequentially but out of order. I thought SVN could handle this, clever little thing it is, but apparently not. Heres an example: Pete changes some CSS to make a new button look pretty (Revision 1) Dave add some CSS to the bottom of the same CSS file as Pete's for a new feature (Revision 2) Dave's mod gets the nod so he merges it into Release and commits it with a log message mentioning revision number and bug tracking id. Pete adds more buttons to finish this mod, no CSS changes here though (Revision 3) Pete then merges his mods (Revision 1 and 3) into the Head of Release (which has Daves merge in it) but this over-writes Daves CSS additions which now dissapear completely. This leads to the site being broken and the Release branch being pretty much useless. So we tried some other ideas like reverting Release back to "Latest" and then just merging in all the Revisions 1,2 and 3 in order. This worked fine until we had Revision 4 which was not ready for live and Revision 5 which was. Suddenly we are getting ourselves in knots again with exactly the same problem! Ok so take three. Revert to Latest, merge in Revision 5, then do any update back to Head. Tree conflicts galore! So thats a no no. I cracked in the end and built it all up manaually but its not something I want to do regular, ideally I want to script our deployment but can't while Release is in such a mess. HELP! What the heck are we doing wrong? I can't seem to find any solutions to this problem of wanting different none sequential Revisions in Release. If its not possible thats fine but how the heck are we meant to get stuff live easily. We can't branch for every single change, the site takes 30 minutes+ to check out it would take too long. Side note, we are using TortoiseSVN so can we keep command line examples to a minimum in any answers? Latest version of TSVN and SVN Version 1.6 so we have the funky merge tracking etc. EDIT: An excellent blog post which deals with the dev/release cycle (although using GIT but still relivant) thought everyone would like to read it if they found this question interesting. (http://nvie.com/git-model) EDIT 2: I wrote a blog post on how to show which branch you are working on in your website which others have asked me about (http://www.offroadcode.com/2010/5/14/which-svn-branch-are-you-working-on.aspx). Hope that helps. In the meantime we are looking at Kiln and hoping to make the switch next month (gulp!)

  Read the article

• 3D game engine for networked world simulation / AI sandbox

  - by Martin

  More than 5 years ago I was playing with DirectSound and Direct3D and I found it really exciting although it took much time to get some good results with C++. I was a college student then. Now I have mostly enterprise development experience in C# and PHP, and I do it for living. There is really no chance to earn money with serious game development in our country. Each day more and more I find that I miss something. So I decided to spend an hour or so each day to do programming for fun. So my idea is to build a world simulation. I would like to begin with something simple - some human-like creatures that live their life - like Sims 3 but much more simple, just basic needs, basic animations, minimum graphic assets - I guess it won't be a city but just a large house for a start. The idea is to have some kind of a server application which stores the world data in MySQL database, and some client applications - body-less AI bots which simulate movement and some interactions with the world and each other. But it wouldn't be fun without 3D. So there are also 3D clients - I can enter that virtual world and see the AI bots living. When the bot enters visible area, it becomes material - loads a mesh and animations, so I can see it. When I leave, the bots lose their 3d mesh bodies again, but their virtual life still continues. With time I hope to make it like some expandable scriptable sandbox to experiment with various AI algorithms and so on. But I am not intended to create a full-blown MMORPG :D I have looked for many possible things I would need (free and open source) and now I have to make a choice: OGRE3D + enet (or RakNet). Old good C++. But won't it slow me down so much that I won't have fun any more? CrystalSpace. Formally not a game engine but very close to that. C++ again. MOgre (OGRE3D wrapper for .NET) + lidgren (networking library which is already used in some gaming projects). Good - I like C#, it is good for fast programming and also can be used for scripting. XNA seems just a framework, not an engine, so really have doubts, should I even look at XNA Game Studio :( Panda3D - full game engine with positive feedback. I really like idea to have all the toolset in one package, it has good reviews as a beginner-friendly engine...if you know Python. On the C++ side, Panda3D has almost non-existent documentation. I have 0 experience with Python, but I've heard it is easy to learn. And if it will be fun and challenging then I guess I would benefit from experience in one more programming language. Which of those would you suggest, not because of advanced features or good platform support but mostly for fun, easy workflow and expandability, and so I can create and integrate all the components I need - the server with the database, AI bots and a 3D client application?

  Read the article

• jQuery Hover functions

  - by Banderdash

  Thus far you guys have been wildly helpful with me getting this little ditty working just so. I have one further request: This markup: <div id="themes"> <h2>Research Themes</h2> <ul> <li class="tier_1"><a class="enviro" href="">Learn about our approach to the <strong>environment</strong></a> <ul class="tier_2 hide"> <li><a href=""><em>How we are tying this all together</em></a></li> <li><a href="off.html"><strong>Project:</strong> Solor Powered Biofactories</a></li> <li><a href=""><strong>Project:</strong> Cleaning Water with Nature</a></li> <li><a href=""><strong>Project:</strong> Higher Efficiency Solar Technology</a></li> </ul> </li> <li class="tier_1"><a class="health" href="">Learn about our approach to <strong>human health</strong></a> <ul class="tier_2 hide"> <li><a href="">Project name numero uno goes here</a></li> <li><a href="">Project name numero dos goes here</a></li> <li><a href="">Project name numero tres goes here</a></li> </ul> </li> <li class="tier_1"><a class="defense" href="">Learn about our approach to <strong>national defense</strong></a> <ul class="tier_2 hide"> <li><a href="">Project name numero uno goes here</a></li> <li><a href="">Project name numero dos goes here</a></li> <li><a href="">Project name numero tres goes here</a></li> </ul> </li> </ul> </div><!-- // end themes --> And this jQuery: $(function(){ $(".tier_1 > a").hover(function() { var currentList = jQuery(this).parents('li').find('.tier_2'); $(currentList).slideToggle(); jQuery(this).parents('ul').find('.tier_2').not(currentList).slideUp(); return false; }); }); Create this nifty 'themes' slider you can see working on the right column of this page: http://clients.pixelbleed.net/biodesign/ I have two problems with it...The hover retracts the slideUp/down when you hit one of the links under a tier_2 ul. I'd like it to remain slideout as someone hovers the nested li's. So the slide should only happen on hover for the tier_1 elements. Also I would like, on hover to add an "active" class to the a element on the tier_1 links. So [a class="enviro"..] would, on hover, become [a class="enviro active"]. This is then removed when one of the other tier_1 items is hovered. This way the pretty color icon can stay visible while someone looks at the nested elements. Not even sure all that is possible with hover, but I figured if anyone would know a way it would be here.

  Read the article

• Bandwidth Limit User

  - by user45611

  Hello, i'm saxtor i would like to know how to limit users bandwidth for 10gb per day however i dont want to limit them by ipaddress because if they where to go to an internet cafe the users at the cafe will be restricted with that quota, i need to log them via sockets, example the user request to download a file from http://localhost with there username and password, when they download the file sql will update there bandwidth they used, i have a script here but its not working my buffer doesnt work that rate when a user uses multiple connections thanks for the help!. /** * @author saxtor if you can improve this code email me @saxtorinc.com * @copyright 2010 / /* * CREATE TABLE IF NOT EXISTS max_traffic ( id int(255) NOT NULL AUTO_INCREMENT, limit int(255) NOT NULL, PRIMARY KEY (id) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=0 ; */ //SQL Connection [this is hackable for testing] date_default_timezone_set("America/Guyana"); mysql_connect("localhost", "root", "") or die(mysql_error()); mysql_select_db("Quota") or die(mysql_error()); function quota($id) { $result = mysql_query("SELECT `limit` FROM max_traffic WHERE id='$id' ") or die(error_log(mysql_error()));; $row = mysql_fetch_array($result); return $row[0]; } function update_quota($id,$value) { $result = mysql_query("UPDATE `max_traffic` SET `limit`='$value' WHERE id='$id'") or die(mysql_error()); return $value; } if ( quota(1) != 0) $limit = quota(1); else $limit = 0; $multipart = false; //was a part of the file requested? (partial download) $range = $_SERVER["HTTP_RANGE"]; if ($range) { //pass client Range header to rapidshare // _insert($range); $cookie .= "\r\nRange: $range"; $multipart = true; header("X-UR-RANGE-Range: $range"); } $url = 'http://127.0.0.1/puppy.iso'; $filename = basename($url); //octet-stream + attachment = client always stores file header('Content-type: application/octet-stream'); header('Content-Disposition: attachment; filename="'.$filename.'"'); //always included so clients know this script supports resuming header("Accept-Ranges: bytes"); //awful hack to pass rapidshare the premium cookie $user_agent = ini_get("user_agent"); ini_set("user_agent", $user_agent . "\r\nCookie: enc=$cookie"); $httphandle = fopen($url, "r"); $headers = stream_get_meta_data($httphandle); $size = $headers["wrapper_data"][6]; $sizer = explode(' ',$size); $size = $sizer[1]; //let's check the return header of rapidshare for range / length indicators //we'll just pass these to the client foreach ($headers["wrapper_data"] as $header) { $header = trim($header); if (substr(strtolower($header), 0, strlen("content-range")) == "content-range") { // _insert($range); header($header); header("X-RS-RANGE-" . $header); $multipart = true; //content-range indicates partial download } elseif (substr(strtolower($header), 0, strlen("Content-Length")) == "content-length") { // _insert($range); header($header); header("X-RS-CL-" . $header); } } if ($multipart) header('HTTP/1.1 206 Partial Content'); flush(); $speed = 4128; $packet = 1; //this is private dont touch. $bufsize = 128; //this is private dont touch/ $bandwidth = 0; //this is private dont touch. while (!(connection_aborted() || connection_status() == 1) && $size > 0) { while (!feof($httphandle) && $size > 0) { if ($limit <= 0 ) $size = 0; if ( $size < $bufsize && $size != 0 && $limit != 0) { echo fread($httphandle,$size); $bandwidth += $size; } else { if( $limit != 0) echo fread($httphandle,$bufsize); $bandwidth += $bufsize; } $size -= $bufsize; $limit -= $bufsize; flush(); if ($speed > 0 && ($bandwidth > $speed*$packet*103)) { usleep(100000); $packet++; //update_quota(1,$limit); } error_log(update_quota(1,$limit)); $limit = quota(1); //if( $size <= 0 ) // exit; } fclose($httphandle); } exit; ?

  Read the article

• puppet master REST API returns 403 when running under passenger works when master runs from command line

  - by Anadi Misra

  I am using the standard auth.conf provided in puppet install for the puppet master which is running through passenger under Nginx. However for most of the catalog, files and certitifcate request I get a 403 response. ### Authenticated paths - these apply only when the client ### has a valid certificate and is thus authenticated # allow nodes to retrieve their own catalog path ~ ^/catalog/([^/]+)$ method find allow $1 # allow nodes to retrieve their own node definition path ~ ^/node/([^/]+)$ method find allow $1 # allow all nodes to access the certificates services path ~ ^/certificate_revocation_list/ca method find allow * # allow all nodes to store their reports path /report method save allow * # unconditionally allow access to all file services # which means in practice that fileserver.conf will # still be used path /file allow * ### Unauthenticated ACL, for clients for which the current master doesn't ### have a valid certificate; we allow authenticated users, too, because ### there isn't a great harm in letting that request through. # allow access to the master CA path /certificate/ca auth any method find allow * path /certificate/ auth any method find allow * path /certificate_request auth any method find, save allow * path /facts auth any method find, search allow * # this one is not stricly necessary, but it has the merit # of showing the default policy, which is deny everything else path / auth any Puppet master however does not seems to be following this as I get this error on client [amisr1@blramisr195602 ~]$ sudo puppet agent --no-daemonize --verbose --server bangvmpllda02.XXXXX.com [sudo] password for amisr1: Starting Puppet client version 3.0.1 Warning: Unable to fetch my node definition, but the agent run will continue: Warning: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /certificate_revocation_list/ca [find] at :110 Info: Retrieving plugin Error: /File[/var/lib/puppet/lib]: Failed to generate additional resources using 'eval_generate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [search] at :110 Error: /File[/var/lib/puppet/lib]: Could not evaluate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Could not retrieve file metadata for puppet://devops.XXXXX.com/plugins: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Error: Could not retrieve catalog from remote server: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /catalog/blramisr195602.XXXXX.com [find] at :110 Using cached catalog Error: Could not retrieve catalog; skipping run Error: Could not send report: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /report/blramisr195602.XXXXX.com [save] at :110 and the server logs show XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/certificate_revocation_list/ca? HTTP/1.1" 403 102 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadatas/plugins?links=manage&recurse=true&&ignore=---+%0A++-+%22.svn%22%0A++-+CVS%0A++-+%22.git%22&checksum_type=md5 HTTP/1.1" 403 95 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadata/plugins? HTTP/1.1" 403 93 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "POST /production/catalog/blramisr195602.XXXXX.com HTTP/1.1" 403 106 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "PUT /production/report/blramisr195602.XXXXX.com HTTP/1.1" 403 105 "-" "Ruby" thefile server conf file is as follows (and goin by what they say on puppet site, It is better to regulate access in auth.conf for reaching file server and then allow file server to server all) [files] path /apps/puppet/files allow * [private] path /apps/puppet/private/%H allow * [modules] allow * I am using server and client version 3 Nginx has been compiled using the following options nginx version: nginx/1.3.9 built by gcc 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) TLS SNI support enabled configure arguments: --prefix=/apps/nginx --conf-path=/apps/nginx/nginx.conf --pid-path=/apps/nginx/run/nginx.pid --error-log-path=/apps/nginx/logs/error.log --http-log-path=/apps/nginx/logs/access.log --with-http_ssl_module --with-http_gzip_static_module --add-module=/usr/lib/ruby/gems/1.8/gems/passenger-3.0.18/ext/nginx --add-module=/apps/Downloads/nginx/nginx-auth-ldap-master/ and the standard nginx puppet master conf server { ssl on; listen 8140 ssl; server_name _; passenger_enabled on; passenger_set_cgi_param HTTP_X_CLIENT_DN $ssl_client_s_dn; passenger_set_cgi_param HTTP_X_CLIENT_VERIFY $ssl_client_verify; passenger_min_instances 5; access_log logs/puppet_access.log; error_log logs/puppet_error.log; root /apps/nginx/html/rack/public; ssl_certificate /var/lib/puppet/ssl/certs/bangvmpllda02.XXXXXX.com.pem; ssl_certificate_key /var/lib/puppet/ssl/private_keys/bangvmpllda02.XXXXXX.com.pem; ssl_crl /var/lib/puppet/ssl/ca/ca_crl.pem; ssl_client_certificate /var/lib/puppet/ssl/certs/ca.pem; ssl_ciphers SSLv2:-LOW:-EXPORT:RC4+RSA; ssl_prefer_server_ciphers on; ssl_verify_client optional; ssl_verify_depth 1; ssl_session_cache shared:SSL:128m; ssl_session_timeout 5m; } Puppet is picking up the correct settings from the files mentioned because config print command points to /etc/puppet [amisr1@bangvmpllDA02 puppet]$ sudo puppet config print | grep conf async_storeconfigs = false authconfig = /etc/puppet/namespaceauth.conf autosign = /etc/puppet/autosign.conf catalog_cache_terminus = store_configs confdir = /etc/puppet config = /etc/puppet/puppet.conf config_file_name = puppet.conf config_version = "" configprint = all configtimeout = 120 dblocation = /var/lib/puppet/state/clientconfigs.sqlite3 deviceconfig = /etc/puppet/device.conf fileserverconfig = /etc/puppet/fileserver.conf genconfig = false hiera_config = /etc/puppet/hiera.yaml localconfig = /var/lib/puppet/state/localconfig name = config rest_authconfig = /etc/puppet/auth.conf storeconfigs = true storeconfigs_backend = puppetdb tagmap = /etc/puppet/tagmail.conf thin_storeconfigs = false I checked the firewall rules on this VM; 80, 443, 8140, 3000 are allowed. Do I still have to tweak any specifics to auth.conf for getting this to work?

  Read the article

• Progressbar blocks notiyfyDatasetChanged() method in Android

  - by pathfinder

  I'm trying to display a ProgressBar while a listview is being populated. This is my XML <FrameLayout android:layout_width="fill_parent" android:layout_height="wrap_content" > <ListView android:id="@android:id/list" android:layout_width="fill_parent" android:layout_height="fill_parent" android:divider="@null" android:dividerHeight="0dp" android:fadingEdge="none" > </ListView> <ProgressBar android:id="@+id/doProgress" android:layout_width="60dp" android:layout_height="60dp" android:layout_gravity="center" /> </FrameLayout> ProgressBar's visibiliy has been changed in the onPostExecuteMethod when the whole listview is loaded. AsyncTask Code: public class WhatToDoLoader extends AsyncTask<String, String, String> { ProgressDialog progress = new ProgressDialog(WhatToDo.this); String url = "http://wearedesigners.net/clients/clients12/tourism/fetchWhatToDoList.php"; final String TAG_MAIN = "item"; final String TAG_ID = "itemId"; final String TAG_NAME = "itemName"; final String TAG_DETAIL = "itemDetailText"; final String TAG_ITEM_IMAGE = "itemImages"; final String TAG_MAP = "itemMapData"; final String TAG_MAP_IMAGE = "mapImage"; @Override protected void onProgressUpdate(String... values) { // TODO Auto-generated method stub super.onProgressUpdate(values); adapter.notifyDataSetChanged(); } @Override protected void onPreExecute() { // TODO Auto-generated method stub super.onPreExecute(); /* * progress.setMessage("Loading What To Do List"); progress.show(); */ } @Override protected String doInBackground(String... params) { XMLParser parser = new XMLParser(); String xml = parser.getXmlFromUrl(url); // getting XML Document doc = parser.getDomElement(xml); // getting DOM element NodeList nl = doc.getElementsByTagName(TAG_MAIN); // TODO Auto-generated method stub for (int i = 0; i < nl.getLength(); i++) { // creating new HashMap HashMap<String, String> map = new HashMap<String, String>(); Element e = (Element) nl.item(i); // adding each child node to HashMap key => value map.put(TAG_ID, parser.getValue(e, TAG_ID)); map.put(TAG_NAME, parser.getValue(e, TAG_NAME)); map.put(TAG_DETAIL, parser.getValue(e, TAG_DETAIL)); map.put(TAG_MAP, parser.getValue(e, TAG_MAP)); map.put(TAG_MAP_IMAGE, parser.getValue(e, TAG_MAP_IMAGE)); map.put(TAG_ITEM_IMAGE, parser.getValue(e, TAG_ITEM_IMAGE)); System.out.println("Test : " + parser.getValue(e, TAG_ID)); // adding HashList to ArrayList whatToDoInfo.add(map); publishProgress(""); } return null; } @Override protected void onPostExecute(String result) { // TODO Auto-generated method stub super.onPostExecute(result); ProgressBar pb = (ProgressBar) findViewById(R.id.doProgress); pb.setVisibility(pb.INVISIBLE); } } When i run the code it throws the following exception. *java.lang.IllegalStateException: The content of the adapter has changed but ListView did not receive a notification. Make sure the content of your adapter is not modified from a background thread, but only from the UI thread.* But the same code works fine when the progressbar feature is omitted. I can't find where i'm going wrong. can someone please help me ? Thank you in advance.

  Read the article

• Should we develop a custom membership provider in this case?

  - by Allen

  I'll be adding a bounty to this, probably 200, more if you guys think its appropriate. I wont accept an answer until I can add a bounty so feel free to go ahead and answer now Summary Long story short, we've been tasked with gutting the authentication and authorization parts of a fairly old and bloated asp.net application that previously had all of these components written from scratch. Since our application isn't a typical one, and none of us have experience in asp.net's built in membership provider stuff, we're not sure if we should roll our own authentication and authorization again or if we should try to work within the asp.net membership provider mindset and develop our own membership provider. Our Application We have a fairly old asp.net application that gets installed at customer locations to service clients on a LAN. Admins create users (users do not sign up) and depending on the install, we may have the software integrated with LDAP. Currently, the LDAP integration bulk-imports the users to our database and when they login, it authenticates against LDAP so we dont have to manage their passwords. Nothing amazing there. Admins can assign users to 1 group and they can change the authorization of that group to manage access to various parts of the software. Groups are maintained by Admins (web based UI) and as said earlier, granted / denied permissions to certain functionality within the application. All this was completely written from the ground up without using any of the built in .net authorization or authentication. We literally have IsLoggedIn() methods that check for login and redirect to our login page if they aren't. Our Rewrite We've been tasked to integrate more tightly with LDAP, they want us to tie groups in our application to groups (or whatever types of containers that LDAP uses) in LDAP so that when a customer opt's to use our LDAP integration, they dont have to manage their users in LDAP AND in our application. The new way, they will simply create users in LDAP, add them to Groups in LDAP and our application will see that they belong to the appropriate LDAP group and authenticate and authorize them. In addition, we've been granted the go ahead to completely rip out the User authentication and authorization code and completely re-do it. Our Problem The problem is that none of us have any experience with asp.net membership provider functionality. The little bit of exposure I have to it makes me worry that it was not intended to be used for an application such as ours. Though, developing our own ASP.NET Membership Provider and Role Manager sounds like it would be a great experience and most likely the appropriate thing to do. Basically, I'm looking for advice, should we be using the ASP.NET Membership provider & Role Management API or should we continue to roll our own? I know this decision will be influenced by our requirements so I'm going over them below Our Requirements Just a quick n dirty list Maintain the ability to have a db of users and authenticate them and give admins (only, not users) the ability to CRUD users Allow the site to integrate with LDAP, when this is chosen, they don't want any users stored in the DB, only the relationship between Groups as they exist in our app / db and the Groups/Containers as they exist in LDAP. .net 3.5 is being used (mix of asp.net webforms and asp.net mvc) Has to work in ASP.NET and ASP.NET MVC (shouldn't be a problem I'm guessing) This can't be user centric, administrators need to be the only ones that CRUD (or import via ldap) users and groups We have to be able to Auth via LDAP when its configured to do so I always try to monitor my questions closely so feel free to ask for more info. Also, as a general summary of what I'm looking for in an answer is just. "You should/shouldn't use xyz, here's why". Links regarding asp.net membership provider and role management stuff are very welcome, most of the stuff I'm finding is 5+ years old. Edit: Added some stuff to "Our Rewrite"

  Read the article

• Single-port 2600 router with 2900XL switch

  - by Slava Maslennikov

  I have a setup, where the single port 2600 router is in port 0/2 in the switch, outside network is on port 0/1, and the rest (0/3-0/24) should be clients for the second network that would be managed by the 2600 router. I configured everything with two VLANs: 100 for outside (0/2-0/24), 200 for inside (0/1-0/2). 0/2 is a trunk port for the two VLANs. The issue that came about is that I can't have two VLANs on at once: software doesn't allow it. Now, I can ping the outside network devices (172.16.7.1, 172.16.7.103), and even google (8.8.8.8) from the router, but not the switch. Devices on connected get a DHCP lease properly but can't ping outside the network, just the router - 172.17.7.1 and the switch itself, 172.17.7.7. The configuration for both the router and the switch are here, as well as below. Router: rt.throom#sho run Building configuration... Current configuration : 1015 bytes ! version 12.1 no service single-slot-reload-enable service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname rt.throom ! enable password To053cret ! ! ! ! ! no ip subnet-zero ip dhcp excluded-address 172.17.7.1 172.17.7.2 ip dhcp excluded-address 172.17.7.3 172.17.7.4 ip dhcp excluded-address 172.17.7.5 ! ip dhcp pool VLAN200 network 172.17.7.0 255.255.255.0 default-router 172.17.7.1 dns-server 8.8.8.8 ! ip audit notify log ip audit po max-events 100 ! ! ! ! ! ! ! interface Ethernet0/0 no ip address ! interface Ethernet0/0.100 encapsulation dot1Q 100 ip address 172.16.7.15 255.255.255.0 ip nat outside ! interface Ethernet0/0.200 encapsulation dot1Q 200 ip address 172.17.7.1 255.255.255.0 ip nat inside ! router eigrp 20 network 172.16.0.0 network 172.17.0.0 no auto-summary no eigrp log-neighbor-changes ! no ip classless no ip http server ! access-list 1 permit 172.17.7.0 0.0.0.255 ! ! line con 0 line aux 0 line vty 0 4 login ! end Switch: sw.throom#sho run Building configuration... Current configuration: ! version 11.2 no service pad no service udp-small-servers no service tcp-small-servers ! hostname sw.throom ! enable password Oh5053cret ! ! no spanning-tree vlan 100 no spanning-tree vlan 200 ip subnet-zero ! ! interface VLAN1 no ip address no ip route-cache ! interface FastEthernet0/1 switchport access vlan 100 spanning-tree portfast ! interface FastEthernet0/2 switchport trunk encapsulation dot1q switchport mode trunk ! interface FastEthernet0/3 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/4 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/5 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/6 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/7 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/8 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/9 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/10 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/11 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/12 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/13 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/14 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/15 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/16 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/17 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/18 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/19 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/20 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/21 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/22 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/23 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/24 switchport access vlan 200 spanning-tree portfast ! ! line con 0 stopbits 1 line vty 0 4 login line vty 5 9 login ! end sho ip route gives: Gateway of last resort is 172.16.7.1 to network 0.0.0.0 172.17.0.0/24 is subnetted, 1 subnets C 172.17.7.0 is directly connected, Ethernet0/0.200 172.16.0.0/24 is subnetted, 1 subnets C 172.16.7.0 is directly connected, Ethernet0/0.100 S* 0.0.0.0/0 [1/0] via 172.16.7.1

  Read the article

• Can't configure PAM + LDAP on Debian Lenny - Getting error=49 on server logs

  - by Jorge Suárez de Lis

  I've been migrating some servers and desktops using Ubuntu 10.04 from getting the users from an old OpenLDAP implementation to a newer Centos Active Directory. I haven't had any problems so far, until I reached a Debian Lenny server. I've set up the server as the others, setting /etc/ldap.conf and /etc/ldap/ldap.conf. However, when I issue "getent passwd", I get nothing from the LDAP server. Reading the pam_ldap manpage, I realized that /etc/ldap.conf was not an accepted file by pam_ldap -it worked with Ubuntu though-, so I renamed it to /etc/pam_ldap.conf. Same result. However, once I've changed the name of this file, when I login using SSH I get this on the LDAP server logs: [20/Jul/2012:11:19:40 +0200] conn=16501 fd=155 slot=155 connection from x.x.x.50 to 10.1.176.237 [20/Jul/2012:11:19:40 +0200] conn=16501 op=0 BIND dn="uid=ubuntu,ou=Applications,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:19:40 +0200] conn=16501 op=0 RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=ubuntu,ou=applications,ou=citius,dc=inv,dc=usc,dc=es" [20/Jul/2012:11:19:40 +0200] conn=16501 op=1 SRCH base="ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" scope=2 filter="(uid=jorge.suarez)" attrs=ALL [20/Jul/2012:11:19:40 +0200] conn=16501 op=1 RESULT err=0 tag=101 nentries=1 etime=0 notes=U [20/Jul/2012:11:19:40 +0200] conn=16501 op=2 BIND dn="uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:19:40 +0200] conn=16501 op=2 RESULT err=49 tag=97 nentries=0 etime=0 The password isn't working. I don't know that could be wrong, anything else seems to be OK. That user/password is working from another clients: [20/Jul/2012:11:29:39 +0200] conn=16528 fd=188 slot=188 connection from x.x.x.224 to 10.1.176.237 [20/Jul/2012:11:29:39 +0200] conn=16528 op=0 BIND dn="uid=ubuntu,ou=Applications,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:29:39 +0200] conn=16528 op=0 RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=ubuntu,ou=applications,ou=citius,dc=inv,dc=usc,dc=es" [20/Jul/2012:11:29:39 +0200] conn=16528 op=1 SRCH base="ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" scope=2 filter="(uid=jorge.suarez)" attrs=ALL [20/Jul/2012:11:29:39 +0200] conn=16528 op=1 RESULT err=0 tag=101 nentries=1 etime=0 notes=U [20/Jul/2012:11:29:39 +0200] conn=16528 op=2 BIND dn="uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:29:39 +0200] conn=16528 op=2 RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=jorge.suarez,ou=people,ou=citius,dc=inv,dc=usc,dc=es" I'm using SSHA for storing passwords on the LDAP server. Maybe this is not supported by Debian Lenny? On pam_ldap.conf, I've set up this, as in all the other servers: # Do not hash the password at all; presume # the directory server will do it, if # necessary. This is the default. pam_password md5 Also tried clear, but it didn't work. Anyways, it's weird that issuing getent passwd still gets me no users. However, if I use pamtest from the package libpam-dotfile to test login, it works. # pamtest ssh jorge.suarez Trying to authenticate <jorge.suarez> for service <ssh>. Password: Authentication successful. # pamtest foo jorge.suarez Trying to authenticate <jorge.suarez> for service <foo>. Password: Authentication successful. But "su" won't work also: # su jorge.suarez Id. descoñecido: jorge.suarez Just the output from getent passwd : # getent passwd root:x:0:0:root:/root:/bin/bash daemon:x:1:1:daemon:/usr/sbin:/bin/sh bin:x:2:2:bin:/bin:/bin/sh sys:x:3:3:sys:/dev:/bin/sh sync:x:4:65534:sync:/bin:/bin/sync games:x:5:60:games:/usr/games:/bin/sh man:x:6:12:man:/var/cache/man:/bin/sh lp:x:7:7:lp:/var/spool/lpd:/bin/sh mail:x:8:8:mail:/var/mail:/bin/sh news:x:9:9:news:/var/spool/news:/bin/sh uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh proxy:x:13:13:proxy:/bin:/bin/sh www-data:x:33:33:www-data:/var/www:/bin/sh backup:x:34:34:backup:/var/backups:/bin/sh list:x:38:38:Mailing List Manager:/var/list:/bin/sh irc:x:39:39:ircd:/var/run/ircd:/bin/sh gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh nobody:x:65534:65534:nobody:/nonexistent:/bin/sh libuuid:x:100:101::/var/lib/libuuid:/bin/sh Debian-exim:x:101:103::/var/spool/exim4:/bin/false statd:x:102:65534::/var/lib/nfs:/bin/false sshd:x:104:65534::/var/run/sshd:/usr/sbin/nologin luser:x:1000:1000:Usuario local de Burdeos,,,:/home/luser:/bin/bash messagebus:x:105:107::/var/run/dbus:/bin/false sge-admin:x:1001:1001:Administrador do SGE,,,:/home/cluster/sge-admin:/bin/bash ntp:x:107:110::/home/ntp:/bin/false haldaemon:x:108:111:Hardware abstraction layer,,,:/var/run/hald:/bin/false vde2-net:x:109:114::/var/run/vde2:/bin/false uml-net:x:110:115::/home/uml-net:/bin/false polkituser:x:111:116:PolicyKit,,,:/var/run/PolicyKit:/bin/false Debian-pxe:x:113:65534:Dummy user for Debian pxe package,,,:/home/Debian-pxe:/bin/false Nscd was stopped from the beginning.

  Read the article

• Hover function for accordion

  - by Banderdash

  Thus far you guys have been wildly helpful with me getting this little ditty working just so. I have one further request: This markup: <div id="themes"> <h2>Research Themes</h2> <ul> <li class="tier_1"><a class="enviro" href="">Learn about our approach to the <strong>environment</strong></a> <ul class="tier_2 hide"> <li><a href=""><em>How we are tying this all together</em></a></li> <li><a href="off.html"><strong>Project:</strong> Solor Powered Biofactories</a></li> <li><a href=""><strong>Project:</strong> Cleaning Water with Nature</a></li> <li><a href=""><strong>Project:</strong> Higher Efficiency Solar Technology</a></li> </ul> </li> <li class="tier_1"><a class="health" href="">Learn about our approach to <strong>human health</strong></a> <ul class="tier_2 hide"> <li><a href="">Project name numero uno goes here</a></li> <li><a href="">Project name numero dos goes here</a></li> <li><a href="">Project name numero tres goes here</a></li> </ul> </li> <li class="tier_1"><a class="defense" href="">Learn about our approach to <strong>national defense</strong></a> <ul class="tier_2 hide"> <li><a href="">Project name numero uno goes here</a></li> <li><a href="">Project name numero dos goes here</a></li> <li><a href="">Project name numero tres goes here</a></li> </ul> </li> </ul> </div><!-- // end themes --> And this jQuery: $(function(){ $(".tier_1 > a").hover(function() { var currentList = jQuery(this).parents('li').find('.tier_2'); $(currentList).slideToggle(); jQuery(this).parents('ul').find('.tier_2').not(currentList).slideUp(); return false; }); }); Create this nifty 'themes' slider you can see working on the right column of this page: http://clients.pixelbleed.net/biodesign/ I have two problems with it...The hover retracts the slideUp/down when you hit one of the links under a tier_2 ul. I'd like it to remain slideout as someone hovers the nested li's. So the slide should only happen on hover for the tier_1 elements. Also I would like, on hover to add an "active" class to the a element on the tier_1 links. So [a class="enviro"..] would, on hover, become [a class="enviro active"]. This is then removed when one of the other tier_1 items is hovered. This way the pretty color icon can stay visible while someone looks at the nested elements. Not even sure all that is possible with hover, but I figured if anyone would know a way it would be here.

  Read the article

• Import Twitter XML into Visual Basic

  - by ct2k7

  Hello, I'm trying to import an XML that's provided by twitter into a readable format in Visual Basic. XML looks like: <?xml version="1.0" encoding="UTF-8" ?> - <statuses type="array"> - <status> <created_at>Mon Jan 18 20:41:19 +0000 2010</created_at> <id>111111111</id> <text>thattext</text> <source><a href="http://www.seesmic.com/" rel="nofollow">Seesmic</a></source> <truncated>false</truncated> <in_reply_to_status_id>7916479948</in_reply_to_status_id> <in_reply_to_user_id>90978206</in_reply_to_user_id> <favorited>false</favorited> <in_reply_to_screen_name>radonsystems</in_reply_to_screen_name> - <user> <id>20193170</id> <name>personname</name> <screen_name>screenname</screen_name> <location>loc</location> <description>desc</description> <profile_image_url>http://a3.twimg.com/profile_images/747012343/twitter_normal.png</profile_image_url> <url>myurl</url> <protected>false</protected> <followers_count>97</followers_count> <profile_background_color>ffffff</profile_background_color> <profile_text_color>333333</profile_text_color> <profile_link_color>0084B4</profile_link_color> <profile_sidebar_fill_color>ffffff</profile_sidebar_fill_color> <profile_sidebar_border_color>ababab</profile_sidebar_border_color> <friends_count>76</friends_count> <created_at>Thu Feb 05 21:54:24 +0000 2009</created_at> <favourites_count>1</favourites_count> <utc_offset>0</utc_offset> <time_zone>London</time_zone> <profile_background_image_url>http://a3.twimg.com/profile_background_images/76723999/754686.png</profile_background_image_url> <profile_background_tile>true</profile_background_tile> <notifications>false</notifications> <geo_enabled>true</geo_enabled> <verified>false</verified> <following>false</following> <statuses_count>782</statuses_count> <lang>en</lang> <contributors_enabled>false</contributors_enabled> </user> <geo /> <coordinates /> <place /> <contributors /> </status> </statuses> Now, I want to display it in a panel that automatically refresh after a certain period, however, I only want to pick out certain bits of info from that xml, such as profile_image_url and text and created_at. You can guess how the data will be formatted, much like that presented in TweetDeck and other Twitter clients. I'm quite new to Visual Basic, so how could I do this? Thanks

  Read the article

• How to resolve "HTTP/1.1 403 Forbidden" errors from iCal/CalDAV server after upgrade to Snow Leopard Server?

  - by morgant

  We recently upgraded our Open Directory Master & Replica to Mac OS X 10.6.4 Snow Leopard Server. We had a mismatched server FQDN & LDAP Search Base/Kerberos Realm, so we exported all users & groups, created the new Open Directory Master w/matching FQDN & Search Base/Realm, reimported users & groups, and re-bound all servers & workstations to the new OD Master. At the same time as all of this, we upgraded our iCal/CalDAV server to Mac OS X 10.6.4 Snow Leopard Server. Ever since doing so, we've seen the following issues with our iCal/CalDAV server and iCal clients on both Mac OS X 10.5 Leopard & Mac OS X 10.6: If a user attempts to move or delete an event (single or repeating) that was created prior to the upgrade to 10.6 Server, they get the following error: Access to "blah" in "blah" in account "blah" is not permitted. The server responded: "HTTP/1.1 403 Forbidden" to operation CalDAVWriteEntityQueueableOperation. New users added to the directory get the following error when attempting to add their account to in iCal's preferences: The user "blah" has no configured pricipals. Confirm with your network administrator that your account has at least one CalDAV principal configured. Interestingly, we've since discovered that users seem to be able to delete individual events from an old repeating event without error, but that's a massive amount of work to get rid of a repeating event. I will note that we have not yet added an SRV record in DNS as instructed on page 19 of iCal_Server_Admin_v10.6.pdf. Further Investigation: In this particular case, a user is attempting to decline repeating events created prior to the upgrade to Snow Leopard Server. Granting the user full write access with sudo calendarserver_manage_principals --add-write-proxy users:user1 users:user2 (which did work) doesn't allow deletion of the events. Still get the usual error: Access to "blah blah" in "blah blah" in account "blah blah" is not permitted. The server responded: "HTTP/1.1 403 Forbidden" to operation CalDAVWriteEntityQueueableOperation. The error that shows up in /var/log/caldavd/error.log on the iCal Server when attempting to delete one of the events is: 2011-03-17 15:14:30-0400 [-] [caldav-8009] [PooledMemCacheProtocol,client] [twistedcaldav.extensions#info] PUT /calendars/__uids__/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX/calendar/XXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.ics HTTP/1.1 2011-03-17 15:14:30-0400 [-] [caldav-8009] [PooledMemCacheProtocol,client] [twistedcaldav.scheduling.implicit#error] Cannot change ORGANIZER: UID:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX And the error in /var/log/system.log on the client is: Mar 17 15:14:30 192-168-21-169-dhcp iCal[33509]: CalDAV CalDAVWriteEntityQueueableOperation failed: status 'HTTP/1.1 403 Forbidden' request:\n\nBEGIN:VCALENDAR^M\nVERSION:2.0^M\nPRODID:-//Apple Inc.//iCal 3.0//EN^M\nCALSCALE:GREGORIAN^M\nBEGIN:VTIMEZONE^M\nTZID:US/Eastern^M\nBEGIN:DAYLIGHT^M\nTZOFFSETFROM:-0500^M\nTZOFFSETTO:-0400^M\nDTSTART:20070311T020000^M\nRRULE:FREQ=YEARLY;BYMONTH=3;BYDAY=2SU^M\nTZNAME:EDT^M\nEND:DAYLIGHT^M\nBEGIN:STANDARD^M\nTZOFFSETFROM:-0400^M\nTZOFFSETTO:-0500^M\nDTSTART:20071104T020000^M\nRRULE:FREQ=YEARLY;BYMONTH=11;BYDAY=1SU^M\nTZNAME:EST^M\nEND:STANDARD^M\nEND:VTIMEZONE^M\nBEGIN:VEVENT^M\nSEQUENCE:5^M\nDTSTART;TZID=US/Eastern:20090117T094500^M\nDTSTAMP:20081227T143043Z^M\nSUMMARY:blah blah^M\nATTENDEE;CN="First Last";CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT:urn:uuid^M\n :XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX^M\nATTENDEE;CN="First Last";CUTYPE=INDIVIDUAL;PARTSTAT=ACCEPTED:mailto:user@d^M\n omain.tld^M\nEXDATE;TZID=US/Eastern:20110319T094500^M\nDTEND;TZID=US/Eastern:20090117T183000^M\nRRULE:FREQ=WEEKLY;INTERVAL=1^M\nTRANSP:OPAQUE^M\nUID:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX^M\nORGANIZER;CN="First Last":mailto:[email protected]^M\nX-WR-ITIPSTATUSML:UNCLEAN^M\nCREATED:20110317T191348Z^M\nEND:VEVENT^M\nEND:VCALENDAR^M\n\n\n... response:\nHTTP/1.1 403 Forbidden^M\nDate: Thu, 17 Mar 2011 19:14:30 GMT^M\nDav: 1, access-control, calendar-access, calendar-schedule, calendar-auto-schedule, calendar-availability, inbox-availability, calendar-proxy, calendarserver-private-events, calendarserver-private-comments, calendarserver-principal-property-search^M\nContent-Type: text/xml^M\nContent-Length: 134^M\nServer: Twisted/8.2.0 TwistedWeb/8.2.0 TwistedCalDAV/2.5 (iCal Server v12.56.21)^M\n^M\n<?xml version='1.0' encoding='UTF-8'?><error xmlns='DAV:'>^M\n <valid-attendee-change xmlns='urn:ietf:params:xml:ns:caldav'/>^M\n</error> One thing I have noticed, and I'm not sure if this has any real effect is that in many of these pre-Snow Leopard Server migration events, the ORGANIZER is specified like the following: ORGANIZER;CN=First Last:mailto:[email protected] But newer ones are more like one of the two following: ORGANIZER;CN=First Last;[email protected];SCHEDULE-STATUS=1 ORGANIZER;CN=First Last;[email protected]:urn:uuid:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX iCal_Server_Admin_v10.6.pdf notes that the ".db.sqlite" files are completely disposable, they're merely a performance cache and are re-built on the fly, so are safe to delete. I did delete the one for the organizer's calendars and it took longer to process the attempted event delete while it rebuilt the database, but still errored out in the end. FWIW the error is thrown by this code: https://trac.calendarserver.org/browser/CalendarServer/trunk/twistedcaldav/scheduling/implicit.py Any further suggestions? I see lots of questions about this in my Google searches, but not solutions and this is a widespread problem on our iCal Server. Now, we mostly try to get users to ignore them (hence the amount of time this question has been open), but every now and then I dig in deeper trying to find the culprit and/or solution.

  Read the article

• How do I solve this indexOutOfBoundsException in my server send/receive thread?

  - by Stefan Schouten

  I am creating a multiplayer game in Java with a server and multiple clients. Everything runs perfectly, until I press the Kick-button in the server to kick a client. Error at receive thread of server, after kicking the first person who joined out of three: java.lang.IndexOutOfBoundsException: Index: 2, Size: 2 at java.util.ArrayList.rangeCheck(ArrayList.java:604) at java.util.ArrayList.get(ArrayList.java:382) > at networktest.Server$3.run(Server.java:186) at java.lang.Thread.run(Thread.java:722) The pointed line is the ois = new ObjectInputStream where I send datatype. The server kicks the first person perfectly, but removes the second one in the list too, with an error of java.lang.ClassCastException. server receive: private static Thread receive = new Thread() { @Override public void run() { ObjectInputStream ois; while (true) { for (int i = 0; i < list_sockets.size(); i++) { try { ois = new ObjectInputStream(list_sockets.get(i).getInputStream()); int receive_state = (Integer) ois.readObject(); // receive state ois = new ObjectInputStream(list_sockets.get(i).getInputStream()); byte datatype = (byte) ois.readObject(); // receive datatype if(datatype == 2){ ois = new ObjectInputStream(list_sockets.get(i).getInputStream()); ChatLine chatLine = (ChatLine) ois.readObject(); // receive ChatLine } else if (datatype == 0){ ois = new ObjectInputStream(list_sockets.get(i).getInputStream()); DataPackage dp = (DataPackage) ois.readObject(); // receive dp list_data.set(i, dp); } if (receive_state == 1) // Client Disconnected by User { disconnectClient(i); i--; } } catch (Exception ex) // Client Disconnected (Client Didn't Notify Server About Disconnecting) { System.err.println("Error @ receive:"); ex.printStackTrace(); disconnectClient(i); i--; } } try { this.sleep(3); } catch (InterruptedException ex) { Logger.getLogger(Server.class.getName()).log(Level.SEVERE, null, ex); } } } }; user send: Thread send = new Thread() { public void run() { ObjectOutputStream oos; byte datatype = 0; while (connected){ if (socket != null){ try { DataPackage dp = new DataPackage(); dp.x = Client.player.x; dp.y = Client.player.y; dp.username = username; dp.charType = charType; dp.walking = (byte)Client.player.walking; if (Client.outputChatLine.line != null) datatype = 2; else { datatype = 0; } oos = new ObjectOutputStream(socket.getOutputStream()); oos.writeObject(Integer.valueOf(Client.this.state)); // send state oos = new ObjectOutputStream(socket.getOutputStream()); oos.writeObject(Byte.valueOf(datatype)); // send datatype if (datatype == 2) { oos.reset(); oos.writeObject(Client.outputChatLine); Client.outputChatLine = new ChatLine(); } else { oos = new ObjectOutputStream(socket.getOutputStream()); oos.writeObject(dp); } if (Client.this.state == 1) { connected = false; socket = null; JOptionPane.showMessageDialog(null, "Client Disconnected", "Info", 1); System.exit(0); } } catch (Exception ex){} } try { this.sleep(2); } catch (InterruptedException ex) { Logger.getLogger(Client.class.getName()).log(Level.SEVERE, null, ex); } } } }; disconnect client method: public static void disconnectClient(int index) { try { list_clients_model.removeElementAt(index); list_client_states.remove(index); list_data.remove(index); list_sockets.remove(index); } catch (Exception ex) {} } Does anyone know how to solve this?

  Read the article

• Set up linux box for hosting a-z

  - by microchasm

  I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP/MySQL: To upgrade PHP and MySQL to the latest versions, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! Add IUS repository to our package manager cd /tmp wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. # list all the packages in the IUS repository; use this to find PHP/MySQL version and libraries you want to install Remove old version of PHP and install newer version from IUS rpm -qa | grep php # to list all of the installed php packages we want to remove yum shell # open an interactive yum shell remove php-common php-mysql php-cli #remove installed PHP components install php53 php53-mysql php53-cli php53-common #add packages you want transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) Upgrade MySQL from IUS repository /etc/init.d/mysqld stop rpm -qa | grep mysql # to see installed mysql packages yum shell remove mysql mysql-server #remove installed MySQL components install mysql51 mysql51-server mysql51-devel transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell service mysqld start mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project Upgrade instructions courtesy of IUS wiki: http://wiki.iuscommunity.org/Doc/ClientUsageGuide Install rssh (restricted shell) to provide scp and sftp access, without allowing ssh login cd /tmp wget http://dag.wieers.com/rpm/packages/rssh/rssh-2.3.2-1.2.el5.rf.x86_64.rpm rpm -ivh rssh-2.3.2-1.2.el5.rf.x86_64.rpm useradd -m -d /home/dev -s /usr/bin/rssh dev passwd dev Edit /etc/rssh.conf to grant access to SFTP to rssh users. vi /etc/rssh.conf Uncomment or add: allowscp allowsftp This allows me to connect to the machine via SFTP protocol in Transmit (my FTP program of choice; I'm sure it's similar with other FTP apps). rssh instructions appropriated (with appreciation!) from http://www.cyberciti.biz/tips/linux-unix-restrict-shell-access-with-rssh.html Set up virtual interfaces ifconfig eth1:1 192.168.1.3 up #start up the virtual interface cd /etc/sysconfig/network-scripts/ cp ifcfg-eth1 ifcfg-eth1:1 #copy default script and match name to our virtual interface vi ifcfg-eth1:1 #modify eth1:1 script #ifcfg-eth1:1 | modify so it looks like this: DEVICE=eth1:1 IPADDR=192.168.1.3 NETMASK=255.255.255.0 NETWORK=192.168.1.0 ONBOOT=yes NAME=eth1:1 Add more Virtual interfaces as needed by repeating. Because of the ONBOOT=yes line in the ifcfg-eth1:1 file, this interface will be brought up when the system boots, or the network starts/restarts. service network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Bringing up interface eth1: [ OK ] ping 192.168.1.3 64 bytes from 192.168.1.3: icmp_seq=1 ttl=64 time=0.105 ms And this is where I'm at. I will keep editing this as I make progress. Any tips on how to Configure virtual interfaces/ip based virtual hosts for SSL, setting up a CA, or anything else would be appreciated.

  Read the article

• SSH not working over IPSec tunnel (Strongswan)

  - by PattPatel

  I configured a small network on a cloud virtual machine. This virtual machine has a static IP address assigned to eth0 interface that I'll call $EXTIP. mydomain.com points to $EXTIP. Inside, I have some linux containers, that get their ip through DHCP in the Subnet 10.0.0.0/24 (i called the virtual interface nat ). They run some services that can be reached through DNAT. Then I wanted to connect to these containers through an IPSec tunnel, so I configured StrongSwan. ipsec.conf: conn %default dpdaction=none rekey=no conn remote keyexchange=ikev2 ike=######## left=[$EXTIP] leftsubnet=10.0.1.0/24,10.0.0.0/24 leftauth=pubkey lefthostaccess=yes leftcert=########.pem leftfirewall=yes leftid="#########" right=%any rightsourceip=10.0.1.0/24 rightauth=######## rightid=%any rightsendcert=never eap_identity=%any auto=add type=tunnel Everything works fine, IPSec clients get IPs of the 10.0.1.0/24 subnet and can reach the containers subnet. My problem is that I'm not able to get SSH connections over the tunnel. It simply does not work, ssh client does not produce any output. Sniffing with tcpdump gives: tcpdump: 09:50:29.648206 ARP, Request who-has 10.0.0.1 tell mydomain.com, length 28 09:50:29.648246 ARP, Reply 10.0.0.1 is-at 00:ff:aa:00:00:01 (oui Unknown), length 28 09:50:29.648253 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [S], seq 4007849772, win 29200, options [mss 1460,sackOK,TS val 1151153 ecr 0,nop,wscale 7], length 0 09:50:29.648296 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [S.], seq 2809522632, ack 4007849773, win 14480, options [mss 1460,sackOK,TS val 11482992 ecr 1151153,nop,wscale 6], length 0 09:50:29.677225 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [.], ack 2809522633, win 229, options [nop,nop,TS val 1151162 ecr 11482992], length 0 09:50:29.679370 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [P.], seq 0:23, ack 1, win 229, options [nop,nop,TS val 1151162 ecr 11482992], length 23 09:50:29.679403 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [.], ack 24, win 227, options [nop,nop,TS val 11483002 ecr 1151162], length 0 09:50:29.684337 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [P.], seq 1:32, ack 24, win 227, options [nop,nop,TS val 11483003 ecr 1151162], length 31 09:50:29.685471 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [.], seq 32:1480, ack 24, win 227, options [nop,nop,TS val 11483003 ecr 1151162], length 1448 09:50:29.685519 IP mydomain.com > 10.0.0.1: ICMP mydomain.com unreachable - need to frag (mtu 1422), length 556 09:50:29.685567 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [.], seq 32:1402, ack 24, win 227, options [nop,nop,TS val 11483003 ecr 1151162], length 1370 09:50:29.685572 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [.], seq 1402:1480, ack 24, win 227, options [nop,nop,TS val 11483003 ecr 1151162], length 78 09:50:29.714601 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [.], ack 32, win 229, options [nop,nop,TS val 1151173 ecr 11483003], length 0 09:50:29.714642 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [P.], seq 1480:1600, ack 24, win 227, options [nop,nop,TS val 11483012 ecr 1151173], length 120 09:50:29.723649 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [P.], seq 1393:1959, ack 32, win 229, options [nop,nop,TS val 1151174 ecr 11483003], length 566 09:50:29.723677 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [.], ack 24, win 227, options [nop,nop,TS val 11483015 ecr 1151173,nop,nop,sack 1 {1394:1960}], length 0 09:50:29.725688 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [.], ack 1480, win 251, options [nop,nop,TS val 1151177 ecr 11483003], length 0 09:50:29.952394 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [P.], seq 1480:1600, ack 24, win 227, options [nop,nop,TS val 11483084 ecr 1151173,nop,nop,sack 1 {1394:1960}], length 120 09:50:29.981056 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [.], ack 1600, win 251, options [nop,nop,TS val 1151253 ecr 11483084,nop,nop,sack 1 {1480:1600}], length 0 If you need it this is my iptables configuration file: iptables: *filter :INPUT ACCEPT [144:9669] :FORWARD DROP [0:0] :OUTPUT ACCEPT [97:15649] :interfacce-trusted - [0:0] :porte-trusted - [0:0] -A FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A FORWARD -j interfacce-trusted -A FORWARD -j porte-trusted -A FORWARD -j REJECT --reject-with icmp-host-unreachable -A FORWARD -d 10.0.0.1/32 -p tcp -m tcp --dport 80 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A FORWARD -d 10.0.0.1/32 -p tcp -m tcp --dport 443 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A FORWARD -d 10.0.0.3/32 -p tcp -m tcp --dport 1234 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A interfacce-trusted -i nat -j ACCEPT -A porte-trusted -d 10.0.0.1/32 -p tcp -m tcp --dport 80 -j ACCEPT -A porte-trusted -d 10.0.0.1/32 -p tcp -m tcp --dport 443 -j ACCEPT -A porte-trusted -d 10.0.0.3/32 -p tcp -m tcp --dport 1234 -j ACCEPT COMMIT *nat :PREROUTING ACCEPT [10:600] :INPUT ACCEPT [10:600] :OUTPUT ACCEPT [4:268] :POSTROUTING ACCEPT [18:1108] -A PREROUTING -d [$EXTIP] -p tcp -m tcp --dport 80 -j DNAT --to-destination 10.0.0.1:80 -A PREROUTING -d [$EXTIP] -p tcp -m tcp --dport 443 -j DNAT --to-destination 10.0.0.1:443 -A PREROUTING -d [$EXTIP] -p tcp -m tcp --dport 8069 -j DNAT --to-destination 10.0.0.3:1234 -A POSTROUTING -s 10.0.0.0/24 -o eth0 -m policy --dir out --pol ipsec -j ACCEPT -A POSTROUTING -s 10.0.1.0/24 -o nat -j MASQUERADE -A POSTROUTING -s 10.0.0.0/24 -o eth0 -j MASQUERADE COMMIT Probably I'm missing something stupid... Thanks in advance for helping :))

  Read the article

• Openfire and LDAP issues

  - by clsmith

  Thanks in advance for the help. Has anyone see this issue with openfire? Currently I use Openfire Fedora with Auth using windows 2003 and also use mysql for the database. When I bring up two clients and talk to each other the time is slow between messages. Sometimes it can take between 5-15 minutes for something sent to get to the person (this is with only two people on the openfire server). I ran a tcp dump using port 389 and see that the machine is running thousands of queries against ldap. When i plug it into wireshark I notice that it is transferring the entire contact list or checking on the status of the entire contact list ? When I run debug on openfire itself I am presented with only this small message in the log: 2010.06.08 07:01:17 LdapManager: Starting LDAP search... 2010.06.08 07:01:17 LdapManager: ... search finished 2010.06.08 07:01:17 LdapManager: Creating a DirContext in LdapManager.getContext()... 2010.06.08 07:01:17 LdapManager: Created hashtable with context values, attempting to create context... 2010.06.08 07:01:17 LdapManager: ... context created successfully, returning. 2010.06.08 07:01:17 LdapManager: Trying to find a groups's DN based on it's groupname. cn: Spark agents CLT, Base DN: OU="Hidden",DC="Hidden",DC="net"... 2010.06.08 07:01:17 LdapManager: Creating a DirContext in LdapManager.getContext()... 2010.06.08 07:01:17 LdapManager: Created hashtable with context values, attempting to create context... 2010.06.08 07:01:17 LdapManager: ... context created successfully, returning. 2010.06.08 07:01:17 LdapManager: Starting LDAP search... 2010.06.08 07:01:17 LdapManager: ... search finished 2010.06.08 07:01:17 LdapManager: Trying to find a groups's DN based on it's groupname. cn: Spark agents CLT, Base DN: OU="Hidden",DC="Hidden",DC="net"... 2010.06.08 07:01:17 LdapManager: Creating a DirContext in LdapManager.getContext()... 2010.06.08 07:01:17 LdapManager: Created hashtable with context values, attempting to create context... 2010.06.08 07:01:17 LdapManager: ... context created successfully, returning. 2010.06.08 07:01:17 LdapManager: Starting LDAP search... 2010.06.08 07:01:17 LdapManager: ... search finished I thought this was a configuration on my end and started to look into the cache settings on the openfire webpages. I tweaked the settings as recommend by the pages and still get the same issues. I doesnt seem to cache the contact list or this might be a feature never fixed or implemented. Has anyone gone through this before ? I have searched online and I see others have great experience with openfire with no issues like I have, or is it because noone checked the queries ? For the time being I created a new Domain Controller and moved openfire to that computer so it can run local queries. This seems to help reduce the speed alot, but when I run the server performance manager tool I see that with two people only using that openfire server I run 593.7 request per second. Thanks for your help, if I didnt provide enough data please let me know what you need and I can find it.

  Read the article

• How to generate a Program template by generating an abstract class

  - by Byron-Lim Timothy Steffan

  i have the following problem. The 1st step is to implement a program, which follows a specific protocol on startup. Therefore, functions as onInit, onConfigRequest, etc. will be necessary. (These are triggered e.g. by incoming message on a TCP Port) My goal is to generate a class for example abstract one, which has abstract functions as onInit(), etc. A programmer should just inherit from this base class and should merely override these abstract functions of the base class. The rest as of the protocol e.g. should be simply handled in the background (using the code of the base class) and should not need to appear in the programmers code. What is the correct design strategy for such tasks? and how do I deal with, that the static main method is not inheritable? What are the key-tags for this problem? (I have problem searching for a solution since I lack clear statements on this problem) Goal is to create some sort of library/class, which - included in ones code - results in executables following the protocol. EDIT (new explanation): Okay let me try to explain more detailled: In this case programs should be clients within a client server architecture. We have a client server connection via TCP/IP. Each program needs to follow a specific protocol upon program start: As soon as my program starts and gets connected to the server it will receive an Init Message (TcpClient), when this happens it should trigger the function onInit(). (Should this be implemented by an event system?) After onInit() a acknowledgement message should be sent to the server. Afterwards there are some other steps as e.g. a config message from the server which triggers an onConfig and so on. Let's concentrate on the onInit function. The idea is, that onInit (and onConfig and so on) should be the only functions the programmer should edit while the overall protocol messaging is hidden for him. Therefore, I thought using an abstract class with the abstract methods onInit(), onConfig() in it should be the right thing. The static Main class I would like to hide, since within it e.g. there will be some part which connects to the tcp port, which reacts on the Init Message and which will call the onInit function. 2 problems here: 1. the static main class cant be inherited, isn it? 2. I cannot call abstract functions from the main class in the abstract master class. Let me give an Pseudo-example for my ideas: public abstract class MasterClass { static void Main(string[] args){ 1. open TCP connection 2. waiting for Init Message from server 3. onInit(); 4. Send Acknowledgement, that Init Routine has ended successfully 5. waiting for Config message from server 6..... } public abstract void onInit(); public abstract void onConfig(); } I hope you get the idea now! The programmer should afterwards inherit from this masterclass and merely need to edit the functions onInit and so on. Is this way possible? How? What else do you recommend for solving this? EDIT: The strategy ideo provided below is a good one! Check out my comment on that.

  Read the article

• Variable mysteriously changing value

  - by Eitan

  I am making a simple tcp/ip chat program for practicing threads and tcp/ip. I was using asynchronous methods but had a problem with concurrency so I went to threads and blocking methods (not asynchronous). I have two private variables defined in the class, not static: string amessage = string.Empty; int MessageLength; and a Thread private Thread BeginRead; Ok so I call a function called Listen ONCE when the client starts: public virtual void Listen(int byteLength) { var state = new StateObject {Buffer = new byte[byteLength]}; BeginRead = new Thread(ReadThread); BeginRead.Start(state); } and finally the function to receive commands and process them, I'm going to shorten it because it is really long: private void ReadThread(object objectState) { var state = (StateObject)objectState; int byteLength = state.Buffer.Length; while (true) { var buffer = new byte[byteLength]; int len = MySocket.Receive(buffer); if (len <= 0) return; string content = Encoding.ASCII.GetString(buffer, 0, len); amessage += cleanMessage.Substring(0, MessageLength); if (OnRead != null) { var e = new CommandEventArgs(amessage); OnRead(this, e); } } } Now, as I understand it only one thread at a time will enter BeginRead, I call Receive, it blocks until I get data, and then I process it. The problem: the variable amessage will change it's value between statements that do not touch or alter the variable at all, for example at the bottom of the function at: if (OnRead != null) "amessage" will be equal to 'asdf' and at if (OnRead != null) "amessage" will be equal to qwert. As I understand it this is indicative of another thread changing the value/running asynchronously. I only spawn one thread to do the receiving and the Receive function is blocking, how could there be two threads in this function and if there is only one thread how does amessage's value change between statements that don't affect it's value. As a side note sorry for spamming the site with these questions but I'm just getting a hang of this threading story and it's making me want to sip cyanide. Thanks in advance. EDIT: Here is my code that calls the Listen Method in the client: public void ConnectClient(string ip,int port) { client.Connect(ip,port); client.Listen(5); } and in the server: private void Accept(IAsyncResult result) { var client = new AbstractClient(MySocket.EndAccept(result)); var e = new CommandEventArgs(client, null); Clients.Add(client); client.Listen(5); if (OnClientAdded != null) { var target = (Control) OnClientAdded.Target; if (target != null && target.InvokeRequired) target.Invoke(OnClientAdded, this, e); else OnClientAdded(this, e); } client.OnRead += OnRead; MySocket.BeginAccept(new AsyncCallback(Accept), null); } All this code is in a class called AbstractClient. The client inherits the Abstract client and when the server accepts a socket it create's it's own local AbstractClient, in this case both modules access the functions above however they are different instances and I couldn't imagine threads from different instances combining especially as no variable is static.

  Read the article

• Apache on Win32: Slow Transfers of single, static files in HTTP, fast in HTTPS

  - by Michael Lackner

  I have a weird problem with Apache 2.2.15 on Windows 2000 Server SP4. Basically, I am trying to serve larger static files, images, videos etc. The download seems to be capped at around 550kB/s even over 100Mbit LAN. I tried other protocols (FTP/FTPS/FTP+ES/SCP/SMB), and they are all in the multi-megabyte range. The strangest thing is that, when using Apache with HTTPS instead of HTTP, it serves very fast, around 2.7MByte/s! I also tried the AnalogX SimpleWWW server just to test the plain HTTP speed of it, and it gave me a healthy 3.3Mbyte/s. I am at a total loss here. I searched the web, and tried to change the following Apache configuration directives in httpd.conf, one at a time, mostly to no avail at all: SendBufferSize 1048576 #(tried multiples of that too, up to 100Mbytes) EnableSendfile Off #(minor performance boost) EnableMMAP Off Win32DisableAcceptEx HostnameLookups Off #(default) I also tried to tune the following registry parameters, setting their values to 4194304 in decimal (they are REG_DWORD), and rebooting afterwards: HKLM\SYSTEM\CurrentControlSet\Services\AFD\Parameters\DefaultReceiveWindow HKLM\SYSTEM\CurrentControlSet\Services\AFD\Parameters\DefaultSendWindow Additionally, I tried to install mod_bw, which sets the event timer precision to 1ms, and allows for bandwidth throttling. According to some people it boosts static file serving performance when set to unlimited bandwidth for everybody. Unfortunately, it did nothing for me. So: AnalogX HTTP: 3300kB/s Gene6 FTPD, plain: 3500kB/s Gene6 FTPD, Implicit and Explicit SSL, AES256 Cipher: 1800-2000kB/s freeSSHD: 1100kB/s SMB shared folder: about 3000kB/s Apache HTTP, plain: 550kB/s Apache HTTPS: 2700kB/s Clients that were used in the bandwidth testing: Internet Explorer 8 (HTTP, HTTPS) Firefox 8 (HTTP, HTTPS) Chrome 13 (HTTP, HTTPS) Opera 11.60 (HTTP, HTTPS) wget under CygWin (HTTP, HTTPS) FileZilla (FTP, FTPS, FTP+ES, SFTP) Windows Explorer (SMB) Generally, transfer speeds are not too high, but that's because the server machine is an old quad Pentium Pro 200MHz machine with 2GB RAM. However, I would like Apache to serve at at least 2Mbyte/s instead of 550kB/s, and that already works with HTTPS easily, so I fail to see why plain HTTP is so crippled. I am using a Kerio Winroute Firewall, but no Throttling and no special filters peeking into HTTP traffic, just the plain Firewall functionality for blocking/allowing connections. The Apache error.log (Loglevel info) shows no warnings, no errors. Also nothing strange to be seen in access.log. I have already stripped down my httpd.conf to the bare minimum just to make sure nothing is interfering, but that didn't help either. If you have any idea, help would be greatly appreciated, since I am totally out of ideas! Thanks! Edit: I have now tried a newer Apache 2.2.21 to see if it makes any difference. However, the behaviour is exactly the same. Edit 2: KM01 has requested a sniff on the HTTP headers, so here comes the LiveHTTPHeaders output (an extension to Firefox). The Output is generated on downloading a single file called "elephantsdream_source.264", which is an H.264/AVC elementary video stream under an Open Source license. I have taken the freedom to edit the URL, removing folders and changing the actual servers domain name to www.mydomain.com. Here it is: LiveHTTPHeaders, Plain HTTP: http://www.mydomain.com/elephantsdream_source.264 GET /elephantsdream_source.264 HTTP/1.1 Host: www.mydomain.com User-Agent: Mozilla/5.0 (Windows NT 5.2; WOW64; rv:6.0.2) Gecko/20100101 Firefox/6.0.2 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: de-de,de;q=0.8,en-us;q=0.5,en;q=0.3 Accept-Encoding: gzip, deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Connection: keep-alive HTTP/1.1 200 OK Date: Wed, 21 Dec 2011 20:55:16 GMT Server: Apache/2.2.21 (Win32) mod_ssl/2.2.21 OpenSSL/0.9.8r PHP/5.2.17 Last-Modified: Thu, 28 Oct 2010 20:20:09 GMT Etag: "c000000013fa5-29cf10e9-493b311889d3c" Accept-Ranges: bytes Content-Length: 701436137 Keep-Alive: timeout=15, max=100 Connection: Keep-Alive Content-Type: text/plain LiveHTTPHeaders, HTTPS: https://www.mydomain.com/elephantsdream_source.264 GET /elephantsdream_source.264 HTTP/1.1 Host: www.mydomain.com User-Agent: Mozilla/5.0 (Windows NT 5.2; WOW64; rv:6.0.2) Gecko/20100101 Firefox/6.0.2 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: de-de,de;q=0.8,en-us;q=0.5,en;q=0.3 Accept-Encoding: gzip, deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Connection: keep-alive HTTP/1.1 200 OK Date: Wed, 21 Dec 2011 20:56:57 GMT Server: Apache/2.2.21 (Win32) mod_ssl/2.2.21 OpenSSL/0.9.8r PHP/5.2.17 Last-Modified: Thu, 28 Oct 2010 20:20:09 GMT Etag: "c000000013fa5-29cf10e9-493b311889d3c" Accept-Ranges: bytes Content-Length: 701436137 Keep-Alive: timeout=15, max=100 Connection: Keep-Alive Content-Type: text/plain

  Read the article

• Help with 2-part question on ASP.NET MVC and Custom Security Design

  - by JustAProgrammer

  I'm using ASP.NET MVC and I am trying to separate a lot of my logic. Eventually, this application will be pretty big. It's basically a SaaS app that I need to allow for different kinds of clients to access. I have a two part question; the first deals with my general design and the second deals with how to utilize in ASP.NET MVC Primarily, there will initially be an ASP.NET MVC "client" front-end and there will be a set of web-services for third parties to interact with (perhaps mobile, etc). I realize I could have the ASP.NET MVC app interact just through the Web Service but I think that is unnecessary overhead. So, I am creating an API that will essentially be a DLL that the Web App and the Web Services will utilize. The API consists of the main set of business logic and Data Transfer Objects, etc. (So, this includes methods like CreateCustomer, EditProduct, etc for example) Also, my permissions requirements are a little complicated. I can't really use a straight Roles system as I need to have some fine-grained permissions (but all permissions are positive rights). So, I don't think I can really use the ASP.NET Roles/Membership system or if I can it seems like I'd be doing more work than rolling my own. I've used Membership before and for this one I think I'd rather roll my own. Both the Web App and Web Services will need to keep security as a concern. So, my design is kind of like this: Each method in the API will need to verify the security of the caller In the Web App, each "page" ("action" in MVC speak) will also check the user's permissions (So, don't present the user with the "Add Customer" button if the user does not have that right but also whenever the API receives AddCustomer(), check the security too) I think the Web Service really needs the checking in the DLL because it may not always be used in some kind of pre-authenticated context (like using Session/Cookies in a Web App); also having the security checks in the API means I don't really HAVE TO check it in other places if I'm on a mobile (say iPhone) and don't want to do all kinds of checking on the client However, in the Web App I think there will be some duplication of work since the Web App checks the user's security before presenting the user with options, which is ok, but I was thinking of a way to avoid this duplication by allowing the Web App to tell the API not check the security; while the Web Service would always want security to be verified Is this a good method? If not, what's better? If so, what's a good way of implementing this. I was thinking of doing this: In the API, I would have two functions for each action: // Here, "Credential" objects are just something I made up public void AddCustomer(string customerName, Credential credential , bool checkSecurity) { if(checkSecurity) { if(Has_Rights_To_Add_Customer(credential)) // made up for clarity { AddCustomer(customerName); } else // throw an exception or somehow present an error } else AddCustomer(customerName); } public void AddCustomer(string customerName) { // actual logic to add the customer into the DB or whatever // Would it be good for this method to verify that the caller is the Web App // through some method? } So, is this a good design or should I do something differently? My next question is that clearly it doesn't seem like I can really use [Authorize ...] for determining if a user has the permissions to do something. In fact, one action might depend on a variety of permissions and the View might hide or show certain options depending on the permission. What's the best way to do this? Should I have some kind of PermissionSet object that the user carries around throughout the Web App in Session or whatever and the MVC Action method would check if that user can use that Action and then the View will have some ViewData or whatever where it checks the various permissions to do Hide/Show?

  Read the article

• Help Repainting a Line

  - by serhio

  I am doing a custom control (inherited from VisualBasic.PowerPacks.LineShape), that should be painted like as standard one, but also having a Icon displayed near it. So, I just overrided OnPaint like this: protected override void OnPaint(System.Windows.Forms.PaintEventArgs e) { e.Graphics.DrawIcon(myIcon, StartPoint.X, StartPoint.Y); base.OnPaint(e); } Now, everything is OK, but when my control moves, the icon still remains drawn on the ancient place. Is there a way to paint it properly? The sample code for tests using Microsoft.VisualBasic.PowerPacks; using System.Windows.Forms; using System.Drawing; namespace LineShapeTest { /// /// Test Form /// public class Form1 : Form { IconLineShape myLine = new IconLineShape(); ShapeContainer shapeContainer1 = new ShapeContainer(); Panel panel1 = new Panel(); public Form1() { this.panel1.Dock = DockStyle.Fill; // load your back image here this.panel1.BackgroundImage = global::WindowsApplication22.Properties.Resources._13820t; this.panel1.Controls.Add(shapeContainer1); this.myLine.StartPoint = new Point(20, 30); this.myLine.EndPoint = new Point(80, 120); this.myLine.Parent = this.shapeContainer1; MouseEventHandler panelMouseMove = new MouseEventHandler(this.panel1_MouseMove); this.panel1.MouseMove += panelMouseMove; this.shapeContainer1.MouseMove += panelMouseMove; this.Controls.Add(panel1); } private void panel1_MouseMove(object sender, MouseEventArgs e) { if (e.Button == MouseButtons.Left) { myLine.StartPoint = e.Location; } } } /// /// Test LineShape /// public class IconLineShape : LineShape { Icon myIcon = SystemIcons.Exclamation; protected override void OnPaint(System.Windows.Forms.PaintEventArgs e) { e.Graphics.DrawIcon(myIcon, StartPoint.X, StartPoint.Y); base.OnPaint(e); } } } Nota Bene, for the lineShape: Parent = ShapeContainer Parent.Parent = Panel Update 1 TRACES In this variant of OnPaint, we have traces: protected override void OnPaint(System.Windows.Forms.PaintEventArgs e) { Graphics g = Parent.Parent.CreateGraphics(); g.DrawIcon(myIcon, StartPoint.X, StartPoint.Y); base.OnPaint(e); } Update 2 BLINKS In this variant of OnPaint, we have a blinking image: protected override void OnPaint(System.Windows.Forms.PaintEventArgs e) { Parent.Parent.Invalidate(this.Region, true); Graphics g = Parent.Parent.CreateGraphics(); g.DrawIcon(myIcon, StartPoint.X, StartPoint.Y); base.OnPaint(e); } Update 3: External Invalidation This variant works well, but... from exterior of IconLineShape class: private void panel1_MouseMove(object sender, MouseEventArgs e) { if (e.Button == MouseButtons.Left) { Region r = myLine.Region; myLine.StartPoint = e.Location; panel1.Invalidate(r); } } /// /// Test LineShape /// public class IconLineShape : LineShape { Icon myIcon = SystemIcons.Exclamation; Graphics parentGraphics; protected override void OnPaint(System.Windows.Forms.PaintEventArgs e) { parentGraphics.DrawIcon(myIcon, StartPoint.X, StartPoint.Y); base.OnPaint(e); } protected override void OnParentChanged(System.EventArgs e) { // Parent is a ShapeContainer // Parent.Parent is a Panel parentGraphics = Parent.Parent.CreateGraphics(); base.OnParentChanged(e); } } Even this resolves the problem of the test example, I need this control to be done inside the control, because I can't force the external "clients" of this control do not forget to save the old region and invalidate the parent each time changing a location...

  Read the article

• FreeBSD high load loopback interface

  - by user1740915

  I have a problem with a FreeBSD server. There is a FreeBSD 9.0 amd64, two network cards em1 (internet), em0 (local network) configured firewall ipfw, natd, squid (not transparent), the server acts as a gateway for access to the Internet. Next problem: upload via squid is very low. At this moment I see next: natd, dhcpd load the cpu at that time when uploading through squid and there are a lot of traffic through the loopback interface. ipfw show output 0100 655389684 36707144666 allow ip from any to any via lo0 00200 0 0 deny ip from any to 127.0.0.0/8 00300 0 0 deny ip from 127.0.0.0/8 to any 00400 0 0 deny ip from any to ::1 00500 0 0 deny ip from ::1 to any 00600 4 292 allow ipv6-icmp from :: to ff02::/16 00700 0 0 allow ipv6-icmp from fe80::/10 to fe80::/10 00800 1 76 allow ipv6-icmp from fe80::/10 to ff02::/16 00900 0 0 allow ipv6-icmp from any to any ip6 icmp6types 1 01000 0 0 allow ipv6-icmp from any to any ip6 icmp6types 2,135,136 01100 1615 76160 deny ip from 192.168.1.1 to any in via em1 01200 0 0 deny ip from 199.69.99.11 to any in via em0 01300 46652 3705426 deny ip from any to 172.16.0.0/12 via em1 01400 3936404 345618870 deny ip from any to 192.168.0.0/16 via em1 01500 4 336 deny ip from any to 0.0.0.0/8 via em1 01600 4129 387621 deny ip from any to 169.254.0.0/16 via em1 01700 0 0 deny ip from any to 192.0.2.0/24 via em1 01800 917566 33777571 deny ip from any to 224.0.0.0/4 via em1 01900 147872 22029252 deny ip from any to 240.0.0.0/4 via em1 02000 1132194739 1190981955947 divert 8668 ip4 from any to any via em1 02100 3 248 deny ip from 172.16.0.0/12 to any via em1 02200 35925 2281289 deny ip from 192.168.0.0/16 to any via em1 02300 1808 122494 deny ip from 0.0.0.0/8 to any via em1 02400 3 174 deny ip from 169.254.0.0/16 to any via em1 02500 0 0 deny ip from 192.0.2.0/24 to any via em1 02600 0 0 deny ip from 224.0.0.0/4 to any via em1 02700 0 0 deny ip from 240.0.0.0/4 to any via em1 02800 960156249 1095316736582 allow tcp from any to any established 02900 64236062 8243196577 allow ip from any to any frag 03000 34 1756 allow tcp from any to me dst-port 25 setup 03100 193 11580 allow tcp from any to me dst-port 53 setup 03200 63 4222 allow udp from any to me dst-port 53 03300 64 8350 allow udp from me 53 to any 03400 417 24140 allow tcp from any to me dst-port 80 setup 03500 211 10472 allow ip from any to me dst-port 3389 setup 05300 77 4488 allow ip from any to me dst-port 1723 setup 05400 3 156 allow ip from any to me dst-port 8443 setup 05500 9882 590596 allow tcp from any to me dst-port 22 setup 05600 1 60 allow ip from any to me dst-port 2000 setup 05700 0 0 allow ip from any to me dst-port 2201 setup 07400 4241779 216690096 deny log logamount 1000 ip4 from any to any in via em1 setup proto tcp 07500 21135656 1048824936 allow tcp from any to any setup 07600 474447 35298081 allow udp from me to any dst-port 53 keep-state 07700 532 40612 allow udp from me to any dst-port 123 keep-state 65535 1990638432 1122305322718 allow ip from any to any systat -ifstat when uploading via squid Load Average ||| Interface Traffic Peak Total tun0 in 79.507 KB/s 232.479 KB/s 42.314 GB out 2.022 MB/s 2.424 MB/s 59.662 GB lo0 in 4.450 MB/s 4.450 MB/s 43.723 GB out 4.450 MB/s 4.450 MB/s 43.723 GB em1 in 2.629 MB/s 2.982 MB/s 464.533 GB out 2.493 MB/s 2.875 MB/s 484.673 GB em0 in 240.458 KB/s 296.941 KB/s 442.368 GB out 512.508 KB/s 850.857 KB/s 416.122 GB top output PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 66885 root 1 92 0 26672K 2784K CPU3 3 528:43 65.48% natd 9160 dhcpd 1 45 0 31032K 9280K CPU1 1 7:40 32.96% dhcpd 66455 root 1 20 0 18344K 2856K select 1 119:27 1.37% openvpn 16043 squid 1 20 0 44404K 17884K kqread 2 0:22 0.29% squid squid.conf cat /usr/local/etc/squid/squid.conf # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl localnet src 10.0.0.0/8 # RFC1918 possible internal network acl localnet src 172.16.0.0/12 # RFC1918 possible internal network acl localnet src 192.168.0.0/16 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port 192.168.1.1:3128 # Uncomment and adjust the following to add a disk cache directory. #cache_dir ufs /var/squid/cache 100 16 256 # Leave coredumps in the first cache dir coredump_dir /var/squid/cache I understand that the traffic passes through the SQUID several times. But can not find why.

  Read the article

• Software: Launching League of Legends spectator mode from Command Line (Mac)

  - by Alex Popov

  Background: tl;dr at the end League of Legends has a spectator mode, in which you can watch someone else's game (essentially a replay) with a 3 minute delay. Popular LoL website OP.GG has figured out a clever way of hosting these spectator games on their own servers, thereby making them replayable, as opposed to only being available while the game is on (as Riot does it). If you request a replay from OP.GG, it sends a batch file which looks for where the League is situated and then the magic happens: @start "" "League of Legends.exe" "8394" "LoLLauncher.exe" "" "spectator fspectate.op.gg:4081 tjJbtRLQ/HMV7HuAxWV0XsXoRB4OmFBr 1391881421 NA1" This works fine on Windows. I'm trying to get it to work on Mac (which has an official client). First I tried running the same command by hand, (split for convenience) /Applications/ ... /LeagueOfLegends.app/ ... /LeagueofLegends 8393 LoLLauncher \ /Applications/ ... /LolClient spectator fspectate.op.gg:4081 tjJbtRLQ/HMV7HuAxWV0XsXoRB4OmFBr 1391881421 NA1 Running this, however, just starts the LoLLauncher, which closes all the active League processes. The exactly same thing happens if I just call /Applications/ ... /LeagueOfLegends.app/ ... /LeagueofLegends Next I tried seeing what actually happens when Spectator mode is initiated so I ran $ ps -axf | grep -i lol which showed UID PID PPID C STIME TTY TIME CMD 503 3085 1 0 Wed02pm ?? 0:00.00 (LolClient) 503 24607 1 0 9:19am ?? 0:00.98 /Applications/League of Legends.app/Contents/LOL/RADS/system/UserKernel.app/Contents/MacOS/UserKernel updateandrun lol_launcher LoLLauncher.app 503 24610 24607 0 9:19am ?? 1:08.76 /Applications/League of Legends.app/Contents/LoL/RADS/projects/lol_launcher/releases/0.0.0.122/deploy/LoLLauncher.app/Contents/MacOS/LoLLauncher 503 24611 24610 0 9:19am ?? 1:23.02 /Applications/League of Legends.app/Contents/LoL/RADS/projects/lol_air_client/releases/0.0.0.127/deploy/bin/LolClient -runtime .\ -nodebug META-INF\AIR\application.xml .\ -- 8393 503 24927 24610 0 9:44am ?? 0:03.37 /Applications/League of Legends.app/Contents/LoL/RADS/solutions/lol_game_client_sln/releases/0.0.0.117/deploy/LeagueOfLegends.app/Contents/MacOS/LeagueofLegends 8394 LoLLauncher /Applications/League of Legends.app/Contents/LoL/RADS/projects/lol_air_client/releases/0.0.0.127/deploy/bin/LolClient spectator 216.133.234.17:8088 Yn1oMX/n3LpXNebibzUa1i3Z+s2HV0ul 1400781241 NA1 Of Interest: there is (LolClient) which I cannot kill by it's PID. UserKernel updateandrun lol_launcher LoLLauncher.app is launched first. LoLLauncher is launched by the UserKernel (as we can see from the PPID) The very long command (PID: 24927) is how Spectator mode is launched, and is also launched by UserKernel. Spectator mode is launched in exactly the same way that the OP.GG .bat wanted to, with the only difference that Spectator mode connects to Riot instead of OP.GG's spectate server. I tried attaching GDB to the LolClient, but I couldn't get anything meaningful from it since it's an Adobe AIR application (and I've never used GDB with code other than mine own). Next I ran dtruss -a -b 100m -f -p $PID on everything I could think of: the LolClient, the LolLauncher and the UserKernel and skimmed the half a million lines produced. I found stuff like the GET request used to get the information of the game to spectate, but I could not see any launch of the equivalent of League of Legends.exe with spectator options. Finally, I ran lsof | grep -i lol to see if anything else was opened in the process, but didn't find anything that seemed appropriate. Open were UserKernel, LolLauncher, LolClient, Adobe AIR, LeagueofLegends and then Bugsplat, all of which are expected. None of this seemed especially relevant to figuring out how LeagueofLegends was opened into spectator mode. It obviously can be done, since Spectator mode is accessible from within the client. It seems likely that it can be done from the CLI, since Windows can do it and the clients are supposed to equals. Unless I'm missing something in the difference between how UNIX and Windows handle CLI application launches. My question is if there are any other things I can try to figure out how to launch Spectator mode myself. tl;dr: Trying to get into spectator mode from the CLI. It's possible on Windows (see first code block) but it just restarts League on Mac. What else can I try to find what call is made, and how to reproduce it? PS: Please let me know how I can improve this question or its formatting, I'd love to use StackOverflow/SuperUser, but as the guys said on the podcast this week (Ep. 59) it's very intimidating. Sorry for posting this on StackOverflow the first time :(

  Read the article

• In Exim, is RBL spam rejected prior to being scanned by SpamAssassin?

  - by user955664

  I've recently been battling spam issues on our mail server. One account in particular was getting hammered with incoming spam. SpamAssassin's memory use is one of our concerns. What I've done is enable RBLs in Exim. I now see many rejection notices in the Exim log based on the various RBLs, which is good. However, when I run Eximstats, the numbers seem to be the same as they were prior to the enabling of the RBLs. I am assuming because the email is still logged in some way prior to the rejection. Is that what's happening, or am I missing something else? Does anyone know if these emails are rejected prior to being processed by SpamAssassin? Or does anyone know how I'd be able to find out? Is there a standard way to generate SpamAssassin stats, similar to Eximstats, so that I could compare the numbers? Thank you for your time and any advice. Edit: Here is the ACL section of my Exim configuration file ###################################################################### # ACLs # ###################################################################### begin acl # ACL that is used after the RCPT command check_recipient: # to block certain wellknown exploits, Deny for local domains if # local parts begin with a dot or contain @ % ! / | deny domains = +local_domains local_parts = ^[.] : ^.*[@%!/|] # to restrict port 587 to authenticated users only # see also daemon_smtp_ports above accept hosts = +auth_relay_hosts condition = ${if eq {$interface_port}{587} {yes}{no}} endpass message = relay not permitted, authentication required authenticated = * # allow local users to send outgoing messages using slashes # and vertical bars in their local parts. # Block outgoing local parts that begin with a dot, slash, or vertical # bar but allows them within the local part. # The sequence \..\ is barred. The usage of @ % and ! is barred as # before. The motivation is to prevent your users (or their virii) # from mounting certain kinds of attacks on remote sites. deny domains = !+local_domains local_parts = ^[./|] : ^.*[@%!] : ^.*/\\.\\./ # local source whitelist # accept if the source is local SMTP (i.e. not over TCP/IP). # Test for this by testing for an empty sending host field. accept hosts = : # sender domains whitelist # accept if sender domain is in whitelist accept sender_domains = +whitelist_domains # sender hosts whitelist # accept if sender host is in whitelist accept hosts = +whitelist_hosts accept hosts = +whitelist_hosts_ip # envelope senders whitelist # accept if envelope sender is in whitelist accept senders = +whitelist_senders # accept mail to postmaster in any local domain, regardless of source accept local_parts = postmaster domains = +local_domains # accept mail to abuse in any local domain, regardless of source accept local_parts = abuse domains = +local_domains # accept mail to hostmaster in any local domain, regardless of source accept local_parts = hostmaster domains =+local_domains # OPTIONAL MODIFICATIONS: # If the page you're using to notify senders of blocked email of how # to get their address unblocked will use a web form to send you email so # you'll know to unblock those senders, then you may leave these lines # commented out. However, if you'll be telling your senders of blocked # email to send an email to [email protected], then you should # replace "errors" with the left side of the email address you'll be # using, and "example.com" with the right side of the email address and # then uncomment the second two lines, leaving the first one commented. # Doing this will mean anyone can send email to this specific address, # even if they're at a blocked domain, and even if your domain is using # blocklists. # accept mail to [email protected], regardless of source # accept local_parts = errors # domains = example.com # deny so-called "legal" spammers" deny message = Email blocked by LBL - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains sender_domains = +blacklist_domains # deny using hostname in bad_sender_hosts blacklist deny message = Email blocked by BSHL - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains hosts = +bad_sender_hosts # deny using IP in bad_sender_hosts blacklist deny message = Email blocked by BSHL - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains hosts = +bad_sender_hosts_ip # deny using email address in blacklist_senders deny message = Email blocked by BSAL - to unblock see http://www.example.com/ domains = +use_rbl_domains senders = +blacklist_senders # By default we do NOT require sender verification. # Sender verification denies unless sender address can be verified: # If you want to require sender verification, i.e., that the sending # address is routable and mail can be delivered to it, then # uncomment the next line. If you do not want to require sender # verification, leave the line commented out #require verify = sender # deny using .spamhaus deny message = Email blocked by SPAMHAUS - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains dnslists = sbl.spamhaus.org # deny using ordb # deny message = Email blocked by ORDB - to unblock see http://www.example.com/ # # only for domains that do want to be tested against RBLs # domains = +use_rbl_domains # dnslists = relays.ordb.org # deny using sorbs smtp list deny message = Email blocked by SORBS - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains dnslists = dnsbl.sorbs.net=127.0.0.5 # Next deny stuff from more "fuzzy" blacklists # but do bypass all checking for whitelisted host names # and for authenticated users # deny using spamcop deny message = Email blocked by SPAMCOP - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = bl.spamcop.net # deny using njabl deny message = Email blocked by NJABL - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = dnsbl.njabl.org # deny using cbl deny message = Email blocked by CBL - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = cbl.abuseat.org # deny using all other sorbs ip-based blocklist besides smtp list deny message = Email blocked by SORBS - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = dnsbl.sorbs.net!=127.0.0.6 # deny using sorbs name based list deny message = Email blocked by SORBS - to unblock see http://www.example.com/ domains =+use_rbl_domains # rhsbl list is name based dnslists = rhsbl.sorbs.net/$sender_address_domain # accept if address is in a local domain as long as recipient can be verified accept domains = +local_domains endpass message = "Unknown User" verify = recipient # accept if address is in a domain for which we relay as long as recipient # can be verified accept domains = +relay_domains endpass verify=recipient # accept if message comes for a host for which we are an outgoing relay # recipient verification is omitted because many MUA clients don't cope # well with SMTP error responses. If you are actually relaying from MTAs # then you should probably add recipient verify here accept hosts = +relay_hosts accept hosts = +auth_relay_hosts endpass message = authentication required authenticated = * deny message = relay not permitted # default at end of acl causes a "deny", but line below will give # an explicit error message: deny message = relay not permitted # ACL that is used after the DATA command check_message: accept

  Read the article

• Calculate new position of player

  - by user1439111

  Edit: I will summerize my question since it is very long (Thanks Len for pointing it out) What I'm trying to find out is to get a new position of a player after an X amount of time. The following variables are known: - Speed - Length between the 2 points - Source position (X, Y) - Destination position (X, Y) How can I calculate a position between the source and destion with these variables given? For example: source: 0, 0 destination: 10, 0 speed: 1 so after 1 second the players position would be 1, 0 The code below works but it's quite long so I'm looking for something shorter/more logical ====================================================================== I'm having a hard time figuring out how to calculate a new position of a player ingame. This code is server sided used to track a player(It's a emulator so I don't have access to the clients code). The collision detection of the server works fine I'm using bresenham's line algorithm and a raycast to determine at which point a collision happens. Once I deteremined the collision I calculate the length of the path the player is about to walk and also the total time. I would like to know the new position of a player each second. This is the code I'm currently using. It's in C++ but I am porting the server to C# and I haven't written the code in C# yet. // Difference between the source X - destination X //and source y - destionation Y float xDiff, yDiff; xDiff = xDes - xSrc; yDiff = yDes - ySrc; float walkingLength = 0.00F; float NewX = xDiff * xDiff; float NewY = yDiff * yDiff; walkingLength = NewX + NewY; walkingLength = sqrt(walkingLength); const float PI = 3.14159265F; float Angle = 0.00F; if(xDes >= xSrc && yDes >= ySrc) { Angle = atanf((yDiff / xDiff)); Angle = Angle * 180 / PI; } else if(xDes < xSrc && yDes >= ySrc) { Angle = atanf((-xDiff / yDiff)); Angle = Angle * 180 / PI; Angle += 90.00F; } else if(xDes < xSrc && yDes < ySrc) { Angle = atanf((yDiff / xDiff)); Angle = Angle * 180 / PI; Angle += 180.00F; } else if(xDes >= xSrc && yDes < ySrc) { Angle = atanf((xDiff / -yDiff)); Angle = Angle * 180 / PI; Angle += 270.00F; } float WalkingTime = (float)walkingLength / (float)speed; bool Done = false; float i = 0; while(i < walkingLength) { if(Done == true) { break; } if(WalkingTime >= 1000) { Sleep(1000); i += speed; WalkTime -= 1000; } else { Sleep(WalkTime); i += speed * WalkTime; WalkTime -= 1000; Done = true; } if(Angle >= 0 && Angle < 90) { float xNew = cosf(Angle * PI / 180) * i; float yNew = sinf(Angle * PI / 180) * i; float NewCharacterX = xSrc + xNew; float NewCharacterY = ySrc + yNew; } I have cut the last part of the loop since it's just 3 other else if statements with 3 other angle conditions and the only change is the sin and cos. The given speed parameter is the speed/second. The code above works but as you can see it's quite long so I'm looking for a new way to calculate this. btw, don't mind the while loop to calculate each new position I'm going to use a timer in C# Thank you very much

  Read the article

< Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >