Search Results

Search found 7931 results on 318 pages for 'hardware rec'.

Page 222/318 | < Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >

• Solaris 10: Identify a PID and the CPU it's running on

  - by Marcus

  I have multiple instances of a database running on a Solaris system. I'd like to prove that each database process is being handled by a different CPU. Essentially, I want to be able to do something like a ps -ef | grep <process_name> to get the PIDs and then run another command (if required) to identify the CPU... Is prstat able to do this? I'm making an assumption that as each database instance is started each one uses a different CPU. I'm not sure if I'm understanding this correctly... The reason I want to do this is because Sun hardware has slow CPU's, but lots of them. Therefore, to get the best performance out of it, I need to try and spread the load among CPU's... Thanks

  Read the article

• BSOD / Reboot Cycling (possibly after windows update?)

  - by Mikey.B

  Windows XP SP3 Hi Guys, My desktop PC rebooted during the night (presumably due to an automated Windows update) and was stuck on a file system check. I forced a reboot as it had been stuck for hours and now the system won't finish booting. It shows the Windows XP splash screen, briefly flickers what looks to be a BSOD, and then reboots. So far, I've tried: Booting into all variations of safe mode (just hangs) Setting BIOS settings to fail-safe defaults (still reboots) Choosing the start-up option to load last known good configuration (still reboots) Any suggestions on how to proceed here? I haven't installed any recent software or hardware so I don't think this is a result of any explicit change I've made. -M

  Read the article

• Black Screen on Startup even after running chkdsk

  - by phwd

  I started an old (Dell Inspiron 2200) the startup goes all the way to Microsoft Windows XP Logo then I get a black screen. I am still able to move the cursor but that is about it. I tried running Recovery console (from CD) with chkdsk command. First time it said they were errors. I decided to do a fixboot and see if the errors went away. They did. Restarted and still no luck. If there are commands that I can call either from recovery console or elsewhere to further describe the problem please tell me and I will re-edit the question. srvtag:7XNSG81 Also what are my full range of options before wiping the hard-drive (if that is even the problem) I want to exhaust all options before replacing hardware.

  Read the article

• Most efficient RAID configuration with 6 disks?

  - by Bob King

  I have a hand-me-down server that I'm setting up at home and it's got 6 72Gb hard disks (as well as 2 18Gb drives that I'm using for the OS). What is the best way to configure those 6 drives? Should I RAID 5 or 6, or go with something simpler, like mirroring? I'm planning to use it to hold a source control repository, and possibly data for a development SQL server. The machine has a hardware raid controller. It is an old IBM server.

  Read the article

• How to makesure VM is in Para virtualization mode on XEN?

  - by ananthan

  I am having a server running XEN,with ubuntu 12.04 as Domain 0. Intel VT is turned on by default and i dont want to run any Windows OS as VM. So 1. how can i makesure that all the created VM will be in paravirtualized mode even with VT enabled? I have heard that in Full Virtualization hypervisor needs to work hard for emulating all the underlying hardware,which may reduce performance for too much i/o specific applications when compared to para mode. 2.Since i am running only Linux VMs do i really need to enable VT support? 3.Can i be able to run Linux VM in para mode with VT enabled? 4.Will simply turning on VT support changes virtualization from para to full virtualization?? 5.Will there be any performance improvement for VM running Linux OS if VT is enabled?

  Read the article

• What kind of website traffic can a 10mpbs connection handle?

  - by Blankman

  I need some help understanding firewalls. I played around with Amazon EC2 and it seems to provide a firewall out-of-the-box. When I say firewall, to me that means the ability to block ports from being accessed from the outside world, or to only specific security groups. I'm looking at a dedicated server hosting provider and they provide a hardware firewall for $50/month and it is limited to 10mbps. Can someone explain to me what kind of traffic this correlates to? Are these usually limited to the number of simultaneous connections also?

  Read the article

• High Availability Clustering and Virtualization

  - by tmcallaghan

  I'm trying to understand how the various virtualization vendors (specifically Amazon EC2, but also VMware and Xen) enable software vendors to provide a real HA solution in the environment where the servers are virtualized. Specifically, if I'm running any HA application (exchange, databases, etc) I need to ensure that my redundant virtual "servers" aren't located on the same physical server. Using in-house virtualization solutions (VMware, Xen, etc) I can provision accordingly as well as check the virtual - physical arrangement. I could, however, accidentally "vmotion" to the same physical hardware. With EC2, I don't even have the ability at provision time to select different physical servers. Since their Cluster Compute Instances are 1 virtual server per physical server it seems to be the only way to guarantee I don't have a false sense of redundancy. Any ideas or thoughts would be helpful. What are others doing about this problem? If the vendors provided an API where I could get something as simple as a unique physical system identifier I could at least know if I'm going to have an issue. -Tim

  Read the article

• 2 identical PCs - can I swap a single hard drive between and expect Windows 7/XP to work?

  - by rgvcorley

  I currently work in 2 different locations, traveling between the 2 every few weeks or so. I currently have screens, kb, mouse etc... in both locations, so I just pick up my tower case when I want to move to the other location. However to make moving easier I was thinking of buying 2 tower cases with hot swappable drive bays on the front and installing identical hardware in each one. This would allow me to pull the drives out and just take them with me and plug them into the PC at the other location. Would windows 7 complain? I'm not fussed about buying licenses for both PCs, but would I have any problems with drivers due to the different serial numbers of the components?

  Read the article

• How to set up an extended desktop on dual monitors in Kubuntu 9.04?

  - by Dennis

  I'm using my laptop (Lenovo Thinkpad T60) and I have a secondary monitor (which has a different resolution than my laptop screen) connected by VGA. Kubuntu recognizes the monitor and it functions but my desktop is mirrored (i.e. an identical copy) across the dual monitors (which is useless to me). How can I extend my desktop across both monitors? P.S. I googled it but the solutions I found weren't standard, they were hardware specific and you had to manually change system files, etc.. There must be an easier way. edit: Here is a snapshot of the settings.

  Read the article

• Can a RAID disk setup crash if only 1 hard disk fails?

  - by Steve Rodrigue

  I am a web developer. I have not much experience in hardware. For this reason, I use managed servers. This morning, one of the drives in our setup failed. However, the full site went down. I asked my web host what happened and he replied that the hard disk failed in such a way that the RAID controller couldn't work properly. Do you guys ever seen that before? Is it possible? Thanks for any help on this guys. I need to know if my web host is honest with me. Steve

  Read the article

• Does RAID negatively affect non-RAID devices?

  - by Django Reinhardt

  I am running Windows 8 on an SSD, and it's all running swimmingly, but I want to store documents on two HHDs (not SDDs) running under RAID 1. My motherboard has two SATA controllers, both set to AHCI. On the 3GB/s controller, all four ports are used (1 Bluray Optical Drive, 1 Spare HD, and the 2 I wish to turn into a RAID 1 drive). Windows is on the 6GB/s controller. Like so: So my question is: If I turn these four ports (on the 3GB/s controller) into a RAID controller, will that negatively affect the non-RAID hardware plugged into it? I.e. Will the HDD or Bluray drive be slower/incompatible with being plugged into a non-AHCI controller? Thanks.

  Read the article

• How to effectively secure a dedicated server for intranet use?

  - by Mark

  I need to secure a dedicated server for intranet use, the server is managed so will have software based security, but what other security should be considered for enterprise level security? The intranet is a host for an ECM (Alfresco) managing and storing sensitive documents. As the information is sensitive we are trying to make it as secure as reasonably possible (requirement in UK law). We plan to encrypt the data on the database. It will be connected to via SSL encryption. Should we consider Hardware firewall, Private lan between the application server and database server?

  Read the article

• 2 identical PCs - can I swap a single hard drive between and expect Windows 7 to work? [closed]

  - by rgvcorley

  I currently work in 2 different locations, traveling between the 2 every few weeks or so. I currently have screens, kb, mouse etc... in both locations, so I just pick up my tower case when I want to move to the other location. However to make moving easier I was thinking of buying 2 tower cases with hot swappable drive bays on the front and installing identical hardware in each one. This would allow me to pull the drives out and just take them with me and plug them into the PC at the other location. Would windows 7 complain? I'm not fussed about buying licenses for both PCs, but would I have any problems with drivers due to the different serial numbers of the components?

  Read the article

• PC reboots instead of shutting down, no software problem. What could be the cause?

  - by DaVinci

  Hi, first of all: I'm not sure if superuser is the right site for my question and google didn't help. I have a pc here that prefers rebooting to shuting down. Everytime I try to shut the pc down it reboots, however it is possible to turn the pc off by pressing the power button. The problem is not windows-specific, the Ubuntu LiveCD does exactly the same that's why I said that it is no software problem. I checked wake on LAN, it is disabled and I also resetted the BIOS settings to factory default. That might not mean that it can't be a BIOS problem but I don't know what else to try here. I did not check any hardware yet but nothing exploded so far. I don't know what could have caused this behaviour as it is not my PC. The Mainboard is a ASUS P5Q-E P45.

  Read the article

• Graphics card for dual 2560 x 1440 output

  - by Bender

  As the title suggests I want to power two 2560 x 1440 monitors from one graphics card. I am just about to send my second graphics card back to Amazon, so before I purchase a 3rd incorrect card I thought I should get some advice. My latest card has dual DL-DVI output but only supports 2560 x 1440 on one output, the other maxes out at 1920 x 1080. Can graphics cards with two Dual Link DVI adapters (or alternately, one Dual Link DVI and one DisplayPort support the a full 2560 x 1440 on both monitors, or does that depend on the graphics hardware and not only the connectors?

  Read the article

• Problem with Lenovo x200s Wifi under Ubutu Karmic

  - by oneself

  Hi, I have just gotten my Lenovo X200s laptop, and I am install Ubuntu 9.10 Karmic on it. The installation went through without a hitch, but I can't get my wifi to work. lspci | grep Network Produces the following results: 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) The weird part is that when I turn the wifi hardware stitch on and off on the side of the laptop, I get the following printed in /var/log messages: Dec 30 23:24:48 temp-laptop kernel: [ 213.432302] usb 4-2: USB disconnect, address 2 Dec 30 23:24:52 temp-laptop kernel: [ 217.276310] usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 30 23:24:52 temp-laptop kernel: [ 217.441759] usb 4-2: configuration #1 chosen from 1 choice Does Ubuntu think my wifi card is a USB device? Am I missing some driver? What can I do to fix this? Please, help!

  Read the article

• Moving an "all-in-one" PC when turned on/off

  - by Purak

  I have an "all-in-one" pc. I know that moving a pc when it is switched on is harmful to the hardware components. What I would like to know is if the same applies to "all-in-one" pc's and if the same applies to regularly moving it from one side of the room to the other when it is turned off! The reason for the question is that I work on one desk during the day, and in the evening move it to the couch so I can do other stuff while watching TV or something. I always turn it off before the move, but somebody told me that I can be damaging the machine by doing so. Can anybody shed some light on this? Many thanks

  Read the article

• Which particular file caused "Delayed write failed" error?

  - by user35020

  I sometimes get this error when resuming from hibernation: Delayed Write Failed: Windows was unable to save all the data for the file G:\$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. I know this is caused because the hard drive (G:, an external USB drive) was (a) plugged in when I hibernated and wasn't ready at wake-up, or (b) I simply forgot to plug it when resuming from hibernation. My question is: is there any way to see which particular file/folder/etc failed to be written? The hard drive functions correctly before and after, so there seems to be no permanent damage. Is there a detailed log someplace or a utility? I've searched but found nothing. Thanks for any help!

  Read the article

• how to design LAN connectivity between private and corporate ?

  - by maruti

  there is a bunch of servers connected to shared storage in a private LAN (10.x.x.x). this privateLAN is managed by a windows server (DHCP, DNS and directory services). how can these hosts be accessed from outside of this privateLAN? Eg. Remote desktop. can the NIC2 on each of the hosts be connected to the other public LAN (compromising speed or security? what are improtant considerations: additional hardware? like switches? routing&DNS software?

  Read the article

• Error sysprepping Windows 8 Enterprise 90-day trial

  - by Philip

  I am using the Windows 8 Enterprise 90-day trial to evaluate the latest version of Windows for a private school. The way I work is that I use sysprep to prepare an generalized image, then I clone it to the school's computers. When I follow the instructions and try sysprep on my installation of Windows 8 in VirtualBox, sysprep thinks briefly and gives me an error message: Fatal error occurred while trying to sysprep the machine. Once I acknowledge it, sysprep closes. I checked the Windows Event Log, and there's nothing there that I could see. I also followed some instructions to cure this problem, but nothing changed. The error remains. My best guess is that the 90-day trial prohibits the use of sysprep, but I can't be sure. It might also be my use of VirtualBox, or who-knows-what. Has anyone had success with this, or encountered the same issue on real hardware?

  Read the article

• Need reasonably priced router with QoS support [closed]

  - by ULTRA_POROV

  I dont need wireless. I am expecting very heavy traffic, with possibly thousands of tcp connections open at one time. This would require that the router has good hardware. I also need to limit the different services i will provide. Lets say i need to guarantee 60% of all the bandwidth to HTTP, 10% FTP, and 10% for Mail... So the router software must have flexible QoS options as well. I don't know which one to chooose, because this information is usually not given on the router specs.

  Read the article

• Removing DVI connectors stuck in video card ports

  - by thecyclegeek

  I need some help removing a couple of DVI connectors which are stuck in my video card ports. I don't know why they were screwed in so tightly in the first place but they won't move. I need to replace hardware in the machine, but doing so with the cables connected and the box in its current position is nearly impossible. I've tried pliers with grips to loosen the screws holding the cable, and I've tried a screwdriver, the latter ended up breaking off the plastic. Neither worked. I'm at a loss as to what to do and I'm very frustrated. Can I get some suggestions?

  Read the article

• Is there a fix for an iMac G5 annoying screen pattern issue?

  - by smountcastle

  It's probably a hardware issue, but I was hoping that someone might know of other options to try. My iMac G5 (the revision just before the built-in iSight was introduced) has developed an annoying pattern of short/wide rectangles in a pinkish hue across the screen. I've followed Apple's instructions to ensure that the logic board hasn't failed (by resetting the SMU and watching the internal LEDs light-up). I suspect either the LCD or video card has failed. Below are two screen shots, one taken by my iPhone which exhibits the problem and a snapshot taking from the faulty iMac which looks fine.

  Read the article

• Getting the keyboard working on a MacBook under Windows XP x64

  - by Theran

  Despite Windows XP Professional x64's unsupported status on MacBooks (model A1181), I've managed to get most of the hardware working by manually installing either the drivers on the OS X Snow Leopard CD, or finding the appropriate drivers online. However, even after installing the Apple keyboard driver from the CD, I can't get Windows to actually use the special driver. Instead, the keyboard just shows up as a generic USB keyboard, with non-functioning Fn and other special keys. Being unable to generate a right-click or Ctrl-Alt-Del makes Windows a bit of a challenge to use. I've tried: uninstalling and reinstalling the keyboard driver removing the keyboard under device manager and letting Windows re-detect it using device manager to manually update the driver How do I get the special functions of the MacBook keyboard working under XP x64?

  Read the article

• Why do I have to enter my password every time I activate / deactivate AirPort (WiFi) on my MacBook P

  - by Another Registered User

  I use Snow Leopard, and I'm used to activate / deactivate WiFi like 20 times per day. The reason is that WiFi stops working properly after a few minutes of use. So every time I try to surf, I must stop/reactivate it first. But now, suddenly I have to enter my user password every time I want to do it. It's so annoying! The dialogue details say: Right: com.apple.airport.power Program: SystemUIServer What can I do that the Mac won't ask me for the password every time? It's hard enough that I have to stop/reactivate WiFi all the time (hardware bug). I have a admin account with full rights.

  Read the article

< Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >