Search Results

Search found 6280 results on 252 pages for 'resource scheduling'.

Page 222/252 | < Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >

  • 'table' undeclared (first use this in a function)

    - by user2318083
    So I'm not sure why this isn't working, I'm creating a new table and setting it to the variable 'table' Is there something I'm doing wrong? This is the error I get when trying to run it: src/simpleshell.c:19:3: error: ‘table’ undeclared (first use in this function) src/simpleshell.c:19:3: note: each undeclared identifier is reported only once for each function it appears in My code is as follows: #include "parser.h" #include "hash_table.h" #include "variables.h" #include "shell.h" #include <stdio.h> int main(void) { char input[MAXINPUTLINE]; table = Table_create(); signal_c_init(); printf("\nhlsh$ "); while(fgets(input, sizeof(input), stdin)){ stripcrlf(input); parse(input); printf("\nhlsh$ "); } Table_free(table); return 0; } Then this is my create a table in the hash_table file: struct Table *Table_create(void){ struct Table *t; t = (struct Table*)calloc(1, sizeof(struct Table)); return t; } From the hash_table.c: #include "hash_table.h" #include "parser.h" #include "shell.h" #include "variables.h" #include <stdio.h> #include <sys/resource.h> #include <sys/wait.h> #include <sys/types.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <pwd.h> #include <fcntl.h> #include <limits.h> #include <signal.h> struct Table *table; unsigned int hash(const char *x){ int i; unsigned int h = 0U; for (i=0; x[i]!='\0'; i++){ h = h * 65599 + (unsigned char)x[i]; } return h % 1024; }

    Read the article

  • SCVMM 2012 R2 - Installing Virtual Switch Fails with Error 2916

    - by Brian M.
    So I've been attempting to teach myself SCVMM 2012 and Hyper-V Server 2012 R2, and I seem to have hit a snag. I've connected my Hyper-V Host to SCVMM 2012 successfully, and created a logical network, logical switch, and uplink port profile (which I essentially blew through with the default settings). However when I attempt to create a virtual switch on my Hyper-V host, I run into an issue. The job will use my logical network settings I created to configure the virtual switch, but when it tries to apply it to the host, it stalls and eventually fails with the following error: Error (2916) VMM is unable to complete the request. The connection to the agent vmhost1.test.loc was lost. WinRM: URL: [h**p://vmhost1.test.loc:5985], Verb: [GET], Resource: [h**p://schemas.microsoft.com/wbem/wsman/1/wmi/root/virtualization/v2/Msvm_ConcreteJob?InstanceID=2F401A71-14A2-4636-9B3E-10C0EE942D33] Unknown error (0x80338126) Recommended Action Ensure that the Windows Remote Management (WinRM) service and the VMM agent are installed and running and that a firewall is not blocking HTTP/HTTPS traffic. Ensure that VMM server is able to communicate with econ-hyperv2.econ.loc over WinRM by successfully running the following command: winrm id –r:vmhost1.test.loc This problem can also be caused by a Windows Management Instrumentation (WMI) service crash. If the server is running Windows Server 2008 R2, ensure that KB 982293 (h**p://support.microsoft.com/kb/982293) is installed on it. If the error persists, restart vmhost1.test.loc and then try the operation again. Refer to h**p://support.microsoft.com/kb/2742275 for more details. I restarted the server, and upon booting am greeted with a message stating "No active network adapters found." I load up powershell and run "Get-NetAdapter -IncludeHidden" to see what's going on, and get the following: Name InterfaceDescription ifIndex Status ---- -------------------- ------- ----- Local Area Connection* 5 WAN Miniport (PPPOE) 6 Di... Ethernet Microsoft Hyper-V Network Switch Def... 10 Local Area Connection* 1 WAN Miniport (L2TP) 2 Di... Local Area Connection* 8 WAN Miniport (Network Monitor) 9 Up Local Area Connection* 4 WAN Miniport (PPTP) 5 Di... Ethernet 2 Broadcom NetXtreme Gigabit Ethernet 13 Up Local Area Connection* 7 WAN Miniport (IPv6) 8 Up Local Area Connection* 9 Microsoft Kernel Debug Network Adapter 11 No... Local Area Connection* 3 WAN Miniport (IKEv2) 4 Di... Local Area Connection* 2 WAN Miniport (SSTP) 3 Di... vSwitch (TEST Test Swi... Hyper-V Virtual Switch Extension Ada... 17 Up Local Area Connection* 6 WAN Miniport (IP) 7 Up Now the machine is no longer visible on the network, and I don't have the slightest idea what went wrong, and more importantly how to undo the damage I caused in order to get back to where I was (save for re-installing Hyper-V Server, but I really would rather know what's going on and how to fix it)! Does anybody have any ideas? Much appreciated!

    Read the article

  • Partitioning recommendations for a Proxmox VM Server (OpenVZ)

    - by luison
    We are new to virtualization and we are planning to turn our online server into a virualized one, mainly for maintenance, backup and recovery improvements. Initially we would only have one real virtual system with load plus 1-3 copys for testing and recovering and maybe a small centralized syslog virtual machine. We would like, if possible the host machine to include an iptables plus rsync to back up to other machines and some other global security systems. Due to this and the offerings of our hosting supplier we are mainly considering Proxmox for its simplicity (we like the idea of its web admin panel) and as I also understand that the container approach of OpenVMZ systems may fit well resource wise with our setup. The base system comes with debian so we can personalise it to our requirements. Proxmox installations default installs an LVM partition for the VMs. Our doubts are with the fact of what would be the best partition structure for this considering that: we would like to have a mirror of the root partition we could boot from if required (our provider supports booting the system from another partition via control panel) we ideally would like to have a partition that could be shared among the VM systems. We still don't know if this is possible directly with OpenVMZ containers, otherwise we are considering doing this by sharing it via NFS on the host machine. we want to use the backup system available on the proxmox host administrator to programme VMs backups and then rsync it to another machine. With this based on a Linux Raid of aprox (750Gb) we are considering something like: ext3_1/ - (20Gb) ext3_2/bak_root - (20Gb) mostly unmounted, root partition sync LVM_1 /var/lib/vz - (390Gb) partition for virtual images LVM_2 /shared_data - (30Gb) LVM_3 /backups - (300Gb) where all backups would be allocated Our initial tests with Proxmox seem to have issues with snapshots backups like this, perhaps caused by the fact that they can not be done to another LVM partition (error: command 'lvcreate --size 1024M --snapshot --name vzsnap-ns204084.XXX.net-0 /dev/pve/LV' failed with exit code 5) in which case we might have to use a standart ext3 partition (but unsure if we can do this with the 4 primary partition limitations). Does this makes more or less sense? Would it be mad to for example write VMs /var/logs to a NFS mounted partition (on the host system)? Are their any other easier ways to mount host system partitions (or folders) to the VMs?

    Read the article

  • windows firewall broken on server 2008

    - by Chloraphil
    This evening I tried to rdp into my server 2008 box and was unable to. After poking around some I discovered that something is awry with my Windows Firewall. I did install 5 windows updates remotely earlier today but rolled those back in an attempt to see if that fixed the problem but had no luck. Symptoms: cannot rdp to machine (including from itself) cannot ping machine cannot connect to file share on machine error message when attempting to open "windows firewall with advanced security" snap-in (there was an error opening the windows firewall with advanced security snap-in ... The Windows Firewall with Advanced Security snap-in failed to load. Restart the windows firewall service on the computer that you are managing. Error code: 0x6D9. When I opened the "user-friendly" Windows Firewall it failed to load most of the gui elements, meaning, the title bar with close, minimize, and maximize buttons is present, the rest of the window has a white background with a yellow rectangle with rounded corners and a yellow triangle w/ an exclamation point is in the upper right. hope that made sense "Windows Firewall" does not appear in the list of services I ran a virus scan that found nothing. How do I fix the firewall and hopefully restore the ability to rdp? EDIT: Added at fission's request: c:\sc query mpsdrv SERVICE_NAME: mpsdrv TYPE : 1 KERNEL_DRIVER STATE : 4 RUNNING (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 c:\sc query mpssvc SERVICE_NAME: mpssvc TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED WIN32_EXIT_CODE : 1068 (0x42c) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 Those two registry keys do exist: HKLM\SYSTEM\CurrentControlSet\Services\mpsdrv & HKLM\SYSTEM\CurrentControlSet\Services\MpsSvc ! The problem seems to be with the Base Filtering Engine, when I try to start it I get the following error: Windows could not start the Base Filtering Engine service on MYCOMPUTER. Error 15100: The resource loader failed to find MUI file. EDIT2: I ran sfc /scannow and i found about 100 occurrences of "[SR] Cannot repair member file"... including several related to the firewall (ex: [l:32{16}]"Firewall.cpl.mui" of Networking-MPSSVC.Resources...). One of them mentioned wordpad.exe, which I tried to open, and it failed. I found here mentions of mounting the install.wim on the install media to copy the affected files over. I am downloading the appropriate AIK and will continue tomorrow evening.

    Read the article

  • Informix "Database locale information mismatch"

    - by lmmortal
    I have informix 11.5 running in my Win-2003 box and few databases running in it. System databases have locale en_us.819 My custom databases have locale en_us.57372 (UTF8). There is also application deployed to JBoss 4.0.2 which has few datasources configured for those custom databases. <local-tx-datasource> <jndi-name>InformixDS</jndi-name> <connection-url>jdbc:informix-sqli://@database.server@:@database.port@/tcs_catalog:[email protected]@</connection-url> <driver-class>com.informix.jdbc.IfxDriver</driver-class> <user-name>@database.username@</user-name> <password>@database.password@</password> <new-connection-sql>set lock mode to wait 5</new-connection-sql> <check-valid-connection-sql>select '1' from dual</check-valid-connection-sql> <metadata> <type-mapping>InformixDB</type-mapping> </metadata> I'm logged in as Administrator and when I start JBoss the following error is shown Caused by: java.sql.SQLException: Database locale information mismatch. at com.informix.util.IfxErrMsg.getSQLException(IfxErrMsg.java:373) at com.informix.jdbc.IfxSqli.a(IfxSqli.java:3208) at com.informix.jdbc.IfxSqli.E(IfxSqli.java:3518) at com.informix.jdbc.IfxSqli.dispatchMsg(IfxSqli.java:2353) at com.informix.jdbc.IfxSqli.receiveMessage(IfxSqli.java:2269) at com.informix.jdbc.IfxSqli.executeOpenDatabase(IfxSqli.java:1786) at com.informix.jdbc.IfxSqliConnect.<init>(IfxSqliConnect.java:1327) at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:501) at com.informix.jdbc.IfxDriver.connect(IfxDriver.java:254) at org.jboss.resource.adapter.jdbc.local.LocalManagedConnectionFactory.createManagedConnection(LocalManagedConnectionFactory.java:151) ... 160 more Caused by: java.sql.SQLException at com.informix.util.IfxErrMsg.getSQLException(IfxErrMsg.java:373) at com.informix.jdbc.IfxSqli.E(IfxSqli.java:3523) ... 170 more DB_LOCALE and CLIENT_LOCALE are set to en_us.utf8 for Administrator. When I set in Server Studio DB_LOCALE and CLIENT_LOCALE to en_us.utf8 I can connect my databases. Where should I set DB_LOCALE and CLIENT_LOCALE to avoid this Database locale information mismatch error? Thanks.

    Read the article

  • vSphere Client vCenter Template Customization Specification Using Windows Sysprep Unattended Answer XML File

    - by Brian
    I'm trying to setup a vSphere Client vCenter v5.0.0 Build 455964 Template Customization Specification using a Windows Sysprep unattended answer XML file for Win2008R2. However I didn't know how Sysprep worked before attempting this so it was a time-consuming nightmare (even after reviewing VMware vSphere ESXi 5's documentation)! I think I've figure out what I'm supposed to be doing, but it's still not working. The biggest problem at this point is that vSphere Client vCenter Customization Specification IP address information is not sticking when I load a Sysprep XML file with just 1 basic setting! This can only be a bug. Here is the process I'm using: PROCESS for Windows - vSphere Client Install Windows OS install VM Tools customize Windows (GPOs can be used to do this after deployment) install Applications (GPOs can be used to do this after deployment too) shutdown the VM convert the VM to a template create a custom Windows Sysprep XML answer file with desired customizations View Management Customization Specifications Manager create "New" Specification for "Target Virtual Machine OS" select Windows check "Use Custom Sysprep Answer File" (ADDS: Custom Sysprep File. KEEPS: Network (IP), Operating System Options (SID, Sysprep /generalize). REPLACES: Registration Information of Owner Name & Organization, Computer Name, Windows License (Key), Administrator Password, Time Zone, Run Once, Workgroup or Domain) name it as "VMwareCS-OS####R#x32/64w/Sysprep-TEST" (CS=Customization Specification) set Description as "Created YYYY/MM/DD by FLast" NEXT import a Sysprep answer file from secure location NEXT Custom settings NEXT click "..." box to right of "Use DHCP" set "Use the following IP settings:" for "IP Address" fill out the first 2 octets set appropriate values for other 2-3 fields set DNS server addresses OK NEXT check "Generate New Security ID (SID)" ALWAYS as template is likely a domain-member computer so it can be updated occasionally NEXT Finish View Inventory VMs and Templates right-click previously completed template Deploy Virtual Machine from this Template provide the new OS name (max15char) select inventory location NEXT select Host/Cluster (wait for validation to succeed) NEXT select Resource Pool (wait for validation to succeed) NEXT select Storage location NEXT check "Power on this virtual machine after creation" select "Customize using an existing customization specification" select desired specification select "Use the Customization Wizard to temporarily adjust the specification before deployment" NEXT NEXT Custom settings? NEXT check "Generate New Security ID (SID)" ALWAYS as template is likely a domain-member computer so it can be updated occasionally NEXT Finish Finish. I know a community member named "brian" (http://serverfault.com/users/25904/brian) has worked with this scenario before, but I couldn't figure out how to contact him directly, so Brian if you see this message could you provide some information to help? Thanks, Brian

    Read the article

  • nginx proxypass content 404s when adding caching location block

    - by Thermionix
    Below is my nginx conf - the location block for adding expires max to content is causing issues with content from the /internal proxied sites. nginx error log; 2011/11/22 15:51:23 [error] 22124#0: *2 open() "/var/www/internal/static/javascripts/lib.js" failed (2: No such file or directory), client: 127.0.0.1, server: example.com, request: "GET /internal/static/javascripts/lib.js?0.6.11RC1 HTTP/1.1", host: "example.com", referrer: "https://example.com/internal/" browser error; lib.js Failed to load resource: the server responded with a status of 404 (Not Found) commenting out the expires max location block allows the proxied sites to work as intended. Config files; proxy.conf location /internal { proxy_pass http://localhost:10001/internal/; include proxy.inc; } .... more entries .... sites-enabled/main server { listen 80; include www.conf; } server { listen 443; include proxy.conf; include www.conf; ssl on; } www.conf root /var/www; server_name example.com; location / { autoindex off; allow all; rewrite ^/$ /mainsite last; } location ~* \.(jpg|jpeg|gif|css|png|js|ico)$ { expires max; } # hide protected files location ~* \.(engine|inc|info|install|module|profile|po|sh|.*sql|theme|tpl(\.php)?|xtmpl)$|^(code-style\.pl|Entries.*|Repository|Root|Tag|Template)$ { deny all; } location ~ \.php$ { fastcgi_index index.php; include fastcgi_params; if (-f $request_filename) { fastcgi_pass 127.0.0.1:9000; } } proxy.inc proxy_connect_timeout 59s; proxy_send_timeout 600; proxy_read_timeout 600; proxy_buffer_size 64k; proxy_buffers 16 32k; proxy_pass_header Set-Cookie; proxy_redirect off; proxy_hide_header Vary; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; proxy_set_header Accept-Encoding ''; proxy_ignore_headers Cache-Control Expires; proxy_set_header Referer $http_referer; proxy_set_header Host $host; proxy_set_header Cookie $http_cookie; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-Host $host; proxy_set_header X-Forwarded-Server $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;

    Read the article

  • cron doesn't execute it's commands

    - by Silvio Keller
    I created an own small server with Debian. Last night i updated it. It created an error while generating the initrd and it didn't boot. Today i booted from another filesystem and did dpkg --configure -a with chroot. I also checked the filesystem. Now everything should be ok. But cron doesn't work:-( It is the same /etc/crontab-File but it doesn't work. I reinstalled cron and tried many things. Is there a way to see cron's log? I only readed about rsyslog, but i have not installed rsyslog, because the server is based on a minimal system (Freeagent Dockstar). Has someone an idea? Best regards Silvio Keller Update There is no file /var/log/syslog and dpkg -l|grep syslog gives me no output, so i think syslog is not installed. It is only a minimal system. cron -l gives: cron: can't lock /var/run/crond.pid, otherpid may be 687: Resource temporarily unavailable So i stopped cron with /etc/init.d/cron stop and executed cron -l again, this gives no output. At this moment i tried to start cron with /etc/init.d/cron start: Starting periodic command scheduler: cron failed! But there's no additional error info... But i see there's now in the background a proccess called cron -l which runs. If i stop it /etc/init.d/cron start works: Starting periodic command scheduler: cron. I used the crontab-file /etc/crontab, this worked for me always. Till i updated my kernel and the initrd it doesn't. The file's content is: SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin # m h dom mon dow user command 17 * * * * root cd / && run-parts --report /etc/cron.hourly 25 6 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ) 47 6 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly ) 52 6 1 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly ) 00 5 * * * root dummy 23 45 * * 7 root dummy 00 * * * * root dummy */1 * * * * root dummy 00 1 * * * root dummy 00 4 * * * root dummy */5 * * * * root dummy #00 */10 * * * root dummy 01 0 * * * root dummy 00 5 * * * root dummy 00 4 * * * root dummy # If i start crontab -e it creates a new file /tmp/crontab.vn87tv/crontab, which is unfortunaly on a tmpfs and which also doesn't work. Thanks & Best regards

    Read the article

  • Error codes 80070490 and 8024200D in Windows Update

    - by Sammy
    How do get past these stupid errors? The way I have set things up is that Windows Update tells me when there are new updates available and then I review them before installing them. Yesterday it told me that there were 11 new updates. So I reviewed them and I saw that about half of them were security updates for Vista x64 and .NET Framework 2.0 SP2, and half of them were just regular updates for Vista x64. I checked them all and hit the Install button. It seemed to work at first, updates were being downloaded and installed, but then at update 11 of 11 total it got stuck and gave me the two error codes you see in the title. Here are some screenshots to give you an idea of what it looks like. This is what it looks like when it presents the updates to me. This is how it looks like when the installation fails. I'm not sure if you're gonna see this very well but these are the updates it's trying to install. Update: This is on Windows Vista Ultimate 64-bit with integrated SP2, installed only two weeks ago on 2012-10-02. Aside from this, the install is working flawlessly. I have not done any major changes to the system like installing new devices or drivers. What I have tried so far: - I tried installing the System Update Readiness Tool (the correct one for Vista x64) from Microsoft. This did not solve the issue. Microsoft resource links: Solutions to 80070490 Windows Update error 80070490 System Update Readiness Tool fixes Windows Update errors in Windows 7, Windows Vista, Windows Server 2008 R2, and Windows Server 2008 Solutions to 8024200D: Windows Update error 8024200d Essentially both solutions tell you to install the System Update Readiness Tool for your system. As I have done so and it didn't solve the problem the next step would be to try to repair Windows. Before I do that, is there anything else I can try? Microsoft automatic troubleshooter If I click the automatic troubleshooter link available on the solution web page above it directs me to download a file called windowsupdate.diagcab. But after download this file is not associated to any Windows program. Is this the so called Microsoft Fix It program? It doesn't have its icon, it's just blank file. Does it need to be associated? And to what Windows program?

    Read the article

  • How can you know what is w3wp.exe doing? (or how to diagnose a performance problem)

    - by Daniel Magliola
    I'm having a performance problem in a site we've made, and I'm not exactly sure how to start diagnosing it. The short description is: We have a very small site (http://hearablog.com) with very little traffic, in a crappy dedicated server, CPU is always very high, sometimes it stays at 100% for minutes, and w3wp.exe is taking most of it. A typical scenario is w3wp.exe takes 60%, and SQL Server takes about 30%. Our DB is pretty small too. Long description and more details: The site is hosted in a very crappy server by Cari.Net. From the beginning we had the feeling that the server didn't quite behave correctly, like some things would take just too long, so this could be a configuration problem from the get go. It may also be that we are getting a virtual server while we're supposed to have a dedicated one, although we have no evidence that'd indicate this, except for the fact that the server tends to be quite slow. The server is Windows 2008 Standard 64-bit, with SQL 2008 Express Hardware is a Celeron 2.80 GHz, 1Gb RAM The website is developed in ASP.Net MVC, using Entity Framework for data access. Now, this is pretty crappy hardware, but i've had other servers with these guys, with equivalent (or worse) HW, and performance is much better than this one. That said, the other servers have W2003 and SQL2005, and I'm using ASP.Net "WebForms" 2.0, no MVC, no LINQ, no EF; so I'm not sure whether going to 2008 / the other stuff means a big performance penalty is expected. I'm serving MP3 files (5-20 Mb) regularly, which is a slightly unusual load, maybe that is causing some kind of problems? Would that cause w3wp to use a lot of CPU? Disk usage seems very low. Memory is usually around 90%, but disk usage seems to indicate it's not paging much. I get tons of e-mails every day about SQL timeouts, for queries taking over 30 seconds, although all our queries are pretty straightforward (or should be, but EF may be screwing it up). This is what resource monitor looks like in one of these "sprints" of 100% CPU, in case there's anything useful there. And a snapshot of some performance counters: Now, what confuses me very much is that CPU usage of w3wp is just so high. It shouldn't be doing much really... So my questions are... Is there any way of finding out "what" it is doing? Maybe even profile it? Any performance counters I should be looking at? Is this to be expected given this hardware/software configuration? Is this could be cause by some kind of configuration failure, where would you start looking? Thank you VERY much. Daniel Magliola

    Read the article

  • Bidirectional real-time sync of large file tree between two distant linux servers

    - by dlo
    By large file tree I mean about 200k files, and growing all the time. A relatively small number of files are being changed in any given hour though. By bidirectional I mean that changes may occur on either server and need to be pushed to the other, so rsync doesn't seem appropriate. By distant I mean that the servers are both in data centers, but geographically remote from each other. Currently there are only 2 servers, but that may expand over time. By real-time, it's ok for there to be a little latency between syncing, but running a cron every 1-2 minutes doesn't seem right, since a very small fraction of files may change in any given hour, let alone minute. EDIT: This is running on VPS's so I might be limited on the kinds of kernel-level stuff I can do. Also, the VPS's are not resource-rich, so I'd shy away from solutions that require lots of ram (like Gluster?). What's the best / most "accepted" approach to get this done? This seems like it would be a common need, but I haven't been able to find a generally accepted approach yet, which was surprising. (I'm seeking the safety of the masses. :) I've come across lsyncd to trigger a sync at the filesystem change level. That seems clever though not super common, and I'm a bit confused by the various lsyncd approaches. There's just using lsyncd with rsync, but it seems this could be fragile for bidirectionality since rsync doesn't have a notion of memory (eg- to know whether a deleted file on A should be deleted on B or whether it's a new file on B that should be copied to A). lipsync appears to be just a lsyncd+rsync implementation, right? Then there's using lsyncd with csync2, like this: http://www.axivo.com/community/threads/lightning-fast-synchronization-with-csync2-and-lsyncd.121/ ... I'm leaning towards this approach, but csync2 is a little quirky, though I did do a successful test of it. I'm mostly concerned that I haven't been able to find a lot of community confirmation of this method. People on here seem to like Unison a lot, but it seems that it is no longer under active development and it's not clear that it has an automatic trigger like lsyncd. I've seen Gluster mentioned, but maybe overkill for what I need? UPDATE: fyi- I ended up going with the original solution I mentioned: lsyncd+csync2. It seems to work quite well, and I like the architectural approach of having the servers be very loosely joined, so that each server can operate indefinitely on its own regardless of the link quality between them.

    Read the article

  • Apache Solr Admin on Tomcat Deployed in WebApps Directory

    - by KM01
    I am trying to get Apache Solr to work on Redhat6 and Tomcat6 (using these instructions), but get this error when browsing to the admin section, http://localhost:8080/solr-example/admin: HTTP Status 404 - missing core name in path type Status report message missing core name in path description The requested resource (missing core name in path) is not available. http://localhost:8080/solr-example loads fine, with a link to "Solr Admin." My setup is as follows: tomcat6: /etc/tomcat6 Solr: /app/solr/example I have a solr-example.xml in /etc/tomcat6/Catalina/localhost/, which reads: <?xml version="1.0" encoding="utf-8"?> <Context docBase="/app/solr/example/apache-solr-3.4.0.war" debug="0" crossContext="true"> <Environment name="solr/home" type="java.lang.String" value="/app/solr/example" override="true"/> </Context> I don't see anything in the logs (/var/log/tomcat6) ... only entires in catalina.out are regarding the starting and stopping of tomcat6. My questions are: 1.What else do I need to do to get "Solr Admin" to work under Tomcat? 2.Where are these "cores" supposed to be specified? I see an entry in /app/solr/example/solr/solr.xml ? <solr persistent="false"> adminPath: RequestHandler path to manage cores. If 'null' (or absent), cores will not be manageable via request handler <cores adminPath="/admin/cores" defaultCoreName="collection1"> <core name="collection1" instanceDir="." /> </cores> </solr> 3.How do I got about ensuring that logs are working correctly? I can't find logs that contain mention of the 404 above. Update in response to @quanta's comment: Downloaded former (apache-solr-3.4.0.tgz) dataDir was not set, now set to: <dataDir>${solr.data.dir:../solr/data}</dataDir> JAVA_OPTS: /usr/lib/jvm/java/bin/java -classpath :/usr/share/tomcat6/bin/bootstrap.jar:/usr/share/tomcat6/bin/tomcat-juli.jar:/usr/share/java/commons-daemon.jar -Dcatalina.base=/usr/share/tomcat6 -Dcatalina.home=/usr/share/tomcat6 -Djava.endorsed.dirs= -Djava.io.tmpdir=/var/cache/tomcat6/temp -Djava.util.logging.config.file=/usr/share/tomcat6/conf/logging.properties -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager org.apache.catalina.startup.Bootstrap start catalina.out contains no indication of the above error

    Read the article

  • Can an administration extraction of an MSI file perform registry and/or system wide changes?

    - by Wil
    I am always getting MSI (or setup EXEs which are basically MSI) files, and half the time they really do not need to be a setup. Microsoft is probably one of the biggest sources - almost every time I want to download a little source code sample, it has a MSI which if you install, only usually has three files. I would rather not do an install and add it to the add/remove programs and who knows what else (although I am sure it wouldn't be that bad) for the sake of three files! For this reason, I always use the following command: MSIEXEC /a <filename.msi> /qb TARGETDIR=<directory name> Now, this works fine and I have never had problems... However, I was just browsing some articles on Technet and found the following resource about administration installs. Apparently, MSI files can have two sequences: The AdminUISequence Table and the AdminExecuteSequence Table. I am not so worried about the AdminUISequence Table as it states that "The installer skips the actions in this table if the user interface level is set to basic UI or no UI", and this is what the /qb switch I use does. However, there is nothing similar written against AdminExecuteSequence Table. I realise that many people who write MSI files simply do it for a single end user and probably do not even touch the admin install options, however, is it possible for them to set items that can affect the system and if so, is there a fail proof way of extracting? I do already use 7-zip, however despite it being on the "supported" page, MSI support is lacking... well... completely sucks. It looses the file names and is generally useless. They have a bug which was closed with no reason/resolution over three years ago, and I opened a forum post and haven't had a reply. I would not really want to install any additional programs if I could help it and just want peoples opinions on this. Thanks. edit - Should also say, I run with UAC on, and I have never ever had a elevation prompt whilst performing the MSIEXEC operation, so I am guessing I have never had a system wide change, however, I am still curious as to if it is possible... As if changes (even just to the user) are possible I would do this locally/in a VM and never on a server or place of importance!

    Read the article

  • Need to increase nginx throughput to an upstream unix socket -- linux kernel tuning?

    - by Ben Lee
    I am running an nginx server that acts as a proxy to an upstream unix socket, like this: upstream app_server { server unix:/tmp/app.sock fail_timeout=0; } server { listen ###.###.###.###; server_name whatever.server; root /web/root; try_files $uri @app; location @app { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto $scheme; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://app_server; } } Some app server processes, in turn, pull requests off /tmp/app.sock as they become available. The particular app server in use here is Unicorn, but I don't think that's relevant to this question. The issue is, it just seems that past a certain amount of load, nginx can't get requests through the socket at a fast enough rate. It doesn't matter how many app server processes I set up, it doesn't even matter what the app is (tried it with a dummy app with just a single endpoint that returned an empty page with status 404). The bottleneck seems to be the socket, not the app. I'm getting a flood of these messages in the nginx error log: connect() to unix:/tmp/app.sock failed (11: Resource temporarily unavailable) while connecting to upstream Many requests result in status code 502, and those that don't take a long time to complete. The nginx write queue stat hovers around 1000. Anyway, I feel like I'm missing something obvious here, because this particular configuration of nginx and app server is pretty common, especially with Unicorn (it's the recommended method in fact). Are there any linux kernel options that needs to be set, or something in nginx? Any ideas about how to increase the throughput to the upstream socket? Something that I'm clearly doing wrong? Additional information on the environment: $ uname -a Linux app1 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ ruby -v ruby 1.9.3p194 (2012-04-20 revision 35410) [x86_64-linux] $ unicorn -v unicorn v4.3.1 $ nginx -V nginx version: nginx/1.2.1 built by gcc 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) TLS SNI support enabled Current kernel tweaks: net.core.rmem_default = 65536 net.core.wmem_default = 65536 net.core.rmem_max = 16777216 net.core.wmem_max = 16777216 net.ipv4.tcp_rmem = 4096 87380 16777216 net.ipv4.tcp_wmem = 4096 65536 16777216 net.ipv4.tcp_mem = 16777216 16777216 16777216 net.ipv4.tcp_window_scaling = 1 net.ipv4.route.flush = 1 net.ipv4.tcp_no_metrics_save = 1 net.ipv4.tcp_moderate_rcvbuf = 1 net.core.somaxconn = 8192 net.netfilter.nf_conntrack_max = 131072

    Read the article

  • Why do I see a large performance hit with DRBD?

    - by BHS
    I see a much larger performance hit with DRBD than their user manual says I should get. I'm using DRBD 8.3.7 (Fedora 13 RPMs). I've setup a DRBD test and measured throughput of disk and network without DRBD: dd if=/dev/zero of=/data.tmp bs=512M count=1 oflag=direct 536870912 bytes (537 MB) copied, 4.62985 s, 116 MB/s / is a logical volume on the disk I'm testing with, mounted without DRBD iperf: [ 4] 0.0-10.0 sec 1.10 GBytes 941 Mbits/sec According to Throughput overhead expectations, the bottleneck would be whichever is slower, the network or the disk and DRBD should have an overhead of 3%. In my case network and I/O seem to be pretty evenly matched. It sounds like I should be able to get around 100 MB/s. So, with the raw drbd device, I get dd if=/dev/zero of=/dev/drbd2 bs=512M count=1 oflag=direct 536870912 bytes (537 MB) copied, 6.61362 s, 81.2 MB/s which is slower than I would expect. Then, once I format the device with ext4, I get dd if=/dev/zero of=/mnt/data.tmp bs=512M count=1 oflag=direct 536870912 bytes (537 MB) copied, 9.60918 s, 55.9 MB/s This doesn't seem right. There must be some other factor playing into this that I'm not aware of. global_common.conf global { usage-count yes; } common { protocol C; } syncer { al-extents 1801; rate 33M; } data_mirror.res resource data_mirror { device /dev/drbd1; disk /dev/sdb1; meta-disk internal; on cluster1 { address 192.168.33.10:7789; } on cluster2 { address 192.168.33.12:7789; } } For the hardware I have two identical machines: 6 GB RAM Quad core AMD Phenom 3.2Ghz Motherboard SATA controller 7200 RPM 64MB cache 1TB WD drive The network is 1Gb connected via a switch. I know that a direct connection is recommended, but could it make this much of a difference? Edited I just tried monitoring the bandwidth used to try to see what's happening. I used ibmonitor and measured average bandwidth while I ran the dd test 10 times. I got: avg ~450Mbits writing to ext4 avg ~800Mbits writing to raw device It looks like with ext4, drbd is using about half the bandwidth it uses with the raw device so there's a bottleneck that is not the network.

    Read the article

  • How to reference a Domain Controller out of the Local Network?

    - by Adrian
    We have multiple servers scattered over different hosting providers. For learning, experimenting and, ultimately, production purposes, I set one of them as a Domain Controller. That went well, most of our services are now authenticating via AD, which helps us a lot. What I want to do now is to simplify the authentication for the multiple servers, by making each of them look at the Domain Controller. This way, our Devs can log into (Remote Desktop) the multiple servers with the same credentials from AD. I know I have to configure each server to look at the Domain Controller. But when I try to add the Domain Controller to the Computer, it cannot find it, although the Domain Controller address is a valid, reachable internet sub-domain (as in "ad.ourcompany.com"). This is the detailed error message: Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt. The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller for domain ad.ourcompany.com: The error was: "DNS name does not exist." (error code 0x0000232B RCODE_NAME_ERROR) The query was for the SRV record for _ldap._tcp.dc._msdcs.ad.ourcompany.com Common causes of this error include the following: - The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. This computer is configured to use DNS servers with the following IP addresses: 109.188.207.9 109.188.207.10 - One or more of the following zones do not include delegation to its child zone: ad.ourcompany.com ourcompany.com com . (the root zone) For information about correcting this problem, click Help. What am I missing? I'm an experienced Dev, but a newbie Sysdamin experimenting with new stuff. Disclaimer All IP addresses and domains/subdomains were changed to preserve security. If by any chance you still can see private information, please let me know so that I can change it.

    Read the article

  • Why is my cron daemon is being killed every few minutes? OpenVZ?

    - by user113215
    As of about a week ago, my cron daemon refuses to stay running. I'm using Debian 6. Running something like pgrep cron shows that the daemon isn't running. I start the service with service cron start or /etc/init.d/cron start and it launches, but it disappears from the running process list after a few minutes (varying anywhere between 1 - 30 minutes before the process is killed again). Using strace -f service cron start, I can see that the process is being killed for some reason: nanosleep({56, 0}, 0x7fffa7184c80) = 0 stat("crontabs", {st_mode=S_IFDIR|S_ISVTX|0730, st_size=4096, ...}) = 0 stat("/etc/crontab", {st_mode=S_IFREG|0644, st_size=1100, ...}) = 0 stat("/etc/cron.d", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 stat("/etc/cron.d/php5", {st_mode=S_IFREG|0644, st_size=475, ...}) = 0 stat("/etc/cron.d/anacron", {st_mode=S_IFREG|0644, st_size=244, ...}) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 rt_sigaction(SIGCHLD, NULL, {0x4036f0, [CHLD], SA_RESTORER|SA_RESTART, 0x2b0e8465f230}, 8) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 nanosleep({60, 0}, <unfinished ...> +++ killed by SIGKILL +++ There's nothing relevant in /var/log/syslog, /var/log/messages, /var/log/auth.log, or /var/log/kern.log to explain why the the process is dying. The system has about 500 MB of free memory, and cat /proc/loadavg returns 0.10 0.21 0.45 so resources shouldn't be the issue. I also tried removing and reinstalling the cron package using apt-get. What else should I check? How do I find out what's killing my crond? Edit: I'm on a virtual machine under OpenVZ (and as such, I have no swap). With cron running, free -m reports: total used free shared buffers cached Mem: 1024 465 558 0 0 0 -/+ buffers/cache: 465 558 Swap: 0 0 0 My OpenVZ User Beancounters via cat /proc/user_beancounters: Version: 2.5 uid resource held maxheld barrier limit failcnt 172087: kmemsize 8275718 25561636 51200000 51200000 0 lockedpages 0 968 2048 2048 0 privvmpages 113442 266465 262200 262200 3740757 shmpages 788 4004 128000 128000 0 dummy 0 0 0 0 0 numproc 39 98 600 600 0 physpages 50521 208434 0 9223372036854775807 0 vmguarpages 0 0 512000 512000 0 oomguarpages 50521 208447 512000 512000 0 numtcpsock 7 323 4096 4096 0 numflock 7 64 2048 2048 0 numpty 1 4 32 32 0 numsiginfo 0 23 1024 1024 0 tcpsndbuf 137984 17878480 20480000 20480000 0 tcprcvbuf 114688 6983504 20480000 20480000 0 othersockbuf 162960 1074440 20480000 20480000 0 dgramrcvbuf 0 24208 10240000 10240000 0 numothersock 101 353 2048 2048 0 dcachesize 459171 747444 10240000 10240000 0 numfile 1010 4221 50000 50000 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 numiptent 39 424 2048 2048 0

    Read the article

  • Windows 8.1 IRQL_NOT_LESS_OR_EQUAL with Asus PCE-n53

    - by JArsenault89
    I saw the following question, and it is the exact same problem on my machine, I have tracked it to the ASUS PCE-n53 wireless card in my desktop. Does anyone know of a workaround? Windows 8.1 RTM installation crashes The adapter worked fine in windows 8... any ideas? EDIT: Crash Dump Analysis * Bugcheck Analysis * * IRQL_NOT_LESS_OR_EQUAL (a) An attempt was made to access a pageable (or completely invalid) address at an interrupt request level (IRQL) that is too high. This is usually caused by drivers using improper addresses. If a kernel debugger is available get the stack backtrace. Arguments: Arg1: 0000000000000000, memory referenced Arg2: 0000000000000002, IRQL Arg3: 0000000000000001, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status) Arg4: fffff801ef4f1316, address which referenced memory Debugging Details: WRITE_ADDRESS: 0000000000000000 CURRENT_IRQL: 2 FAULTING_IP: nt!KeReleaseSpinLock+16 fffff801`ef4f1316 f048832100 lock and qword ptr [rcx],0 DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT BUGCHECK_STR: AV PROCESS_NAME: System ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre TRAP_FRAME: ffffd00020d45550 -- (.trap 0xffffd00020d45550) NOTE: The trap frame does not contain all registers. Some register values may be zeroed or incorrect. rax=0000000000000001 rbx=0000000000000000 rcx=0000000000000000 rdx=0000000055920200 rsi=0000000000000000 rdi=0000000000000000 rip=fffff801ef4f1316 rsp=ffffd00020d456e0 rbp=ffffd00020d45768 r8=0000000055920222 r9=0000000035930000 r10=0000000055920222 r11=ffffd00020d456a8 r12=0000000000000000 r13=0000000000000000 r14=0000000000000000 r15=0000000000000000 iopl=0 nv up ei pl zr na po nc nt!KeReleaseSpinLock+0x16: fffff801ef4f1316 f048832100 lock and qword ptr [rcx],0 ds:0000000000000000=???????????????? Resetting default scope LOCK_ADDRESS: fffff801ef6da360 -- (!locks fffff801ef6da360) Resource @ nt!PiEngineLock (0xfffff801ef6da360) Exclusively owned Contention Count = 6 Threads: ffffe000010ff040-01<* 1 total locks, 1 locks currently held PNP_TRIAGE: Lock address : 0xfffff801ef6da360 Thread Count : 1 Thread address: 0xffffe000010ff040 Thread wait : 0x1fbe LAST_CONTROL_TRANSFER: from fffff801ef5647e9 to fffff801ef558ca0 STACK_TEXT: ffffd00020d45408 fffff801ef5647e9 : 000000000000000a 0000000000000000 0000000000000002 0000000000000001 : nt!KeBugCheckEx ffffd00020d45410 fffff801ef56303a : 0000000000000001 0000000000000000 ffff0c83e3e25300 ffffd00020d45550 : nt!KiBugCheckDispatch+0x69 ffffd00020d45550 fffff801ef4f1316 : 00000000000a5890 0000000000000001 0000000000000000 ffffe00004c00000 : nt!KiPageFault+0x23a ffffd00020d456e0 fffff80003b430ad : 00000000000afe80 ffffe00004c00000 00000000000a2f80 0000000035720000 : nt!KeReleaseSpinLock+0x16 ffffd00020d45710 fffff80003ac249f : ffffe00004c00000 00000000000000a8 ffffe00004c85050 0000000000000800 : netr28x+0x840ad ffffd00020d457b0 fffff80000b76475 : ffffd00020d459e8 ffffd00020d459f0 ffffe00004ac2006 ffffe00004ac21a0 : netr28x+0x349f ffffd00020d459a0 fffff80000baa248 : ffffe00004ac2eb8 0000000000000000 ffffe00000000000 ffffe00004ac21a0 : ndis!ndisMInvokeInitialize+0x39 ffffd00020d459e0 fffff80000b74784 : 0000000000000050 ffffe00004907ba0 0000000000000000 01cecbbc328e6cde : ndis!ndisMInitializeAdapter+0x4dc ffffd00020d46050 fffff80000b74d3d : 0000000000000050 ffffe0000443e770 ffffc00000951480 ffffe00004ac21a0 : ndis!ndisInitializeAdapter+0x60 ffffd00020d460a0 fffff80000b74c14 : ffffe00004ac21a0 ffffe00004ac2050 ffffe000047ec2a0 0000000000000000 : ndis!ndisPnPStartDevice+0x89 ffffd00020d460f0 fffff80000b87695 : ffffe00004ac21a0 ffffe00004ac21a0 ffffd00020d461b0 ffffe000047ec2a0 : ndis!ndisStartDeviceSynchronous+0x58 ffffd00020d46140 fffff80000b6a760 : ffffe000047ec2a0 ffffe00004ac21a0 0000000000000000 0000000000000000 : ndis!ndisPnPIrpStartDevice+0x13471 ffffd00020d46170 fffff8000032576c : ffffe00004b11501 ffffe00004b11570 0000000000000001 fffff80000325880 : ndis!ndisPnPDispatch+0x140 ffffd00020d461e0 fffff8000030b40a : ffffe000047ec2a0 0000000000000106 ffffd00020d462f0 ffffe00004b116c0 : Wdf01000!FxPkgFdo::PnpSendStartDeviceDownTheStackOverload+0xe8 ffffd00020d46250 fffff80000305942 : 0000000000000106 ffffd00020d462f0 0000000000000105 ffffd00020d464d0 : Wdf01000!FxPkgPnp::PnpEventInitStarting+0xa ffffd00020d46280 fffff80000305a5a : ffffe00004b116c8 0000000000000002 ffffe00004b11570 ffffe00004b11600 : Wdf01000!FxPkgPnp::PnpEnterNewState+0x102 ffffd00020d46310 fffff80000305bc4 : 0000000000000000 ffffd00020d46400 ffffe00004b116a0 0000000000000000 : Wdf01000!FxPkgPnp::PnpProcessEventInner+0xc2 ffffd00020d46390 fffff8000030c27a : 0000000000000000 ffffe00004b11570 0000000000000000 ffffe00004b11570 : Wdf01000!FxPkgPnp::PnpProcessEvent+0xe4 ffffd00020d46430 fffff80000300936 : ffffe00004b11570 ffffd00020d464c0 0000000000000000 ffffe00004a0e630 : Wdf01000!FxPkgPnp::_PnpStartDevice+0x1e ffffd00020d46460 fffff800002fba18 : ffffe000047ec2a0 ffffe000047ec2a0 0000000000000000 ffffe0000486f020 : Wdf01000!FxPkgPnp::Dispatch+0xd2 ffffd00020d464d0 fffff801ef838796 : 0000000000000000 fffff801ef6aa101 0000000000000000 ffffd000208aa180 : Wdf01000!FxDevice::DispatchWithLock+0x7d8 ffffd00020d465b0 fffff801ef4d5bad : ffffe000011dc3a0 ffffd00020d46659 0000000000000000 fffff801ef7f5ba4 : nt!PnpAsynchronousCall+0x102 ffffd00020d465f0 fffff801ef838e57 : ffffe000011db8d0 ffffe000011db8d0 ffffe00004a8d060 ffffc00002b11200 : nt!PnpStartDevice+0xc5 ffffd00020d466c0 fffff801ef838fe7 : ffffe000011db8d0 ffffe000011db8d0 0000000000000000 ffffe000011db8d0 : nt!PnpStartDeviceNode+0x147 ffffd00020d46790 fffff801ef7fd19e : ffffe000011db8d0 0000000000000001 0000000000000001 ffffe00000000001 : nt!PipProcessStartPhase1+0x53 ffffd00020d467d0 fffff801ef897b17 : ffffe000011db8d0 0000000000000001 0000000000000000 fffff801ef7ef7b2 : nt!PipProcessDevNodeTree+0x3ce ffffd00020d46a50 fffff801ef4f5033 : 0000000100000003 0000000000000000 0000000000000000 0000000000000000 : nt!PiRestartDevice+0xaf ffffd00020d46aa0 fffff801ef44565d : fffff801ef4f4c90 ffffd00020d46bd0 0000000000000000 ffffe00004a10170 : nt!PnpDeviceActionWorker+0x3a3 ffffd00020d46b50 fffff801ef4eec80 : 0000000000000000 ffffe000010ff040 ffffe000010ff040 ffffe0000035c900 : nt!ExpWorkerThread+0x2b5 ffffd00020d46c00 fffff801ef55f2c6 : ffffd00020472180 ffffe000010ff040 ffffe00000608040 ffffc00000002710 : nt!PspSystemThreadStartup+0x58 ffffd00020d46c60 0000000000000000 : ffffd00020d47000 ffffd00020d41000 0000000000000000 0000000000000000 : nt!KiStartSystemThread+0x16 STACK_COMMAND: kb FOLLOWUP_IP: netr28x+840ad fffff800`03b430ad 4533e4 xor r12d,r12d SYMBOL_STACK_INDEX: 4 SYMBOL_NAME: netr28x+840ad FOLLOWUP_NAME: MachineOwner MODULE_NAME: netr28x IMAGE_NAME: netr28x.sys DEBUG_FLR_IMAGE_TIMESTAMP: 51de7a8d FAILURE_BUCKET_ID: AV_netr28x+840ad BUCKET_ID: AV_netr28x+840ad ANALYSIS_SOURCE: KM FAILURE_ID_HASH_STRING: km:av_netr28x+840ad FAILURE_ID_HASH: {a1f86ced-f566-ac23-afeb-1aa88ea5ab8f} Followup: MachineOwner

    Read the article

  • Benchmark MySQL Cluster using flexAsynch: No free node id found for mysqld(API)?

    - by quanta
    I am going to benchmark MySQL Cluster using flexAsynch follow this guide, details as below: mkdir /usr/local/mysqlc732/ cd /usr/local/src/mysql-cluster-gpl-7.3.2 cmake . -DCMAKE_INSTALL_PREFIX=/usr/local/mysqlc732/ -DWITH_NDB_TEST=ON make make install Everything works fine until this step: # /usr/local/mysqlc732/bin/flexAsynch -t 1 -p 80 -l 2 -o 100 -c 100 -n FLEXASYNCH - Starting normal mode Perform benchmark of insert, update and delete transactions 1 number of concurrent threads 80 number of parallel operation per thread 100 transaction(s) per round 2 iterations Load Factor is 80% 25 attributes per table 1 is the number of 32 bit words per attribute Tables are with logging Transactions are executed with hint provided No force send is used, adaptive algorithm used Key Errors are disallowed Temporary Resource Errors are allowed Insufficient Space Errors are disallowed Node Recovery Errors are allowed Overload Errors are allowed Timeout Errors are allowed Internal NDB Errors are allowed User logic reported Errors are allowed Application Errors are disallowed Using table name TAB0 NDBT_ProgramExit: 1 - Failed ndb_cluster.log: WARNING -- Failed to allocate nodeid for API at 127.0.0.1. Returned eror: 'No free node id found for mysqld(API).' I also have recompiled with -DWITH_DEBUG=1 -DWITH_NDB_DEBUG=1. How can I run flexAsynch in the debug mode? # /usr/local/mysqlc732/bin/flexAsynch -h FLEXASYNCH Perform benchmark of insert, update and delete transactions Arguments: -t Number of threads to start, default 1 -p Number of parallel transactions per thread, default 32 -o Number of transactions per loop, default 500 -l Number of loops to run, default 1, 0=infinite -load_factor Number Load factor in index in percent (40 -> 99) -a Number of attributes, default 25 -c Number of operations per transaction -s Size of each attribute, default 1 (PK is always of size 1, independent of this value) -simple Use simple read to read from database -dirty Use dirty read to read from database -write Use writeTuple in insert and update -n Use standard table names -no_table_create Don't create tables in db -temp Create table(s) without logging -no_hint Don't give hint on where to execute transaction coordinator -adaptive Use adaptive send algorithm (default) -force Force send when communicating -non_adaptive Send at a 10 millisecond interval -local 1 = each thread its own node, 2 = round robin on node per parallel trans 3 = random node per parallel trans -ndbrecord Use NDB Record -r Number of extra loops -insert Only run inserts on standard table -read Only run reads on standard table -update Only run updates on standard table -delete Only run deletes on standard table -create_table Only run Create Table of standard table -drop_table Only run Drop Table on standard table -warmup_time Warmup Time before measurement starts -execution_time Execution Time where measurement is done -cooldown_time Cooldown time after measurement completed -table Number of standard table, default 0

    Read the article

  • MySQL Execution Time Spikes

    - by Brett
    I am having issues with MySQL all of the sudden today. Details: OS: CentOS release 5.7 Server type: Parallels virtuozzo container running on mediatemple DV 4.0 package Average total memory usage: <500mb Total memory usage allowed: 1gb (part of shared pool for emergency only, users are only guaranteed 500mb) Processor: 1ghz Main database sizes with most usage: 275mb & 107mb server stack: nginx 1.0.10, mysql 5.1.54, php 5.3.8 with php-fpm innodb_buffer_pool_size=100M php-fpm max children: 5 Webapps: custom php-based sites, magento & drupal slow query timeout is set to 1 second Steps I completed towards diagnosis: Cannot restart container yet - I will try later tonight when our domestic traffic has dropped Enabled mysql and php-fpm slowlog. Found functions that did DB queries in php-fpm slowlog were taking over 1s to complete at times Found some simple queries in mysql slowlog taking well over 1s to complete that should take less than 1s. Most interesting - execution time seems to spike at times. A query will take .2s a couple times, then one time it will take 8s to run the same query. These results were verified by running raw SQL queries through mysql command line. Top does not reveal anything too interesting Only resource related thing i can see is load averages much higher than normal Up until today, mysql has been fine, there have been no major changes to the db since yesterday. Sometimes things are so bad, I am seeing bad gateway errors after 60s of execution time. Innodb is doing on average 300-1400 reads/sec. Mysql is doing 3-10 queries/sec slow query count in 2 hours uptime is 171 (with slow timeout at 1 second) Tried restarting mysql, nginx, php-fpm multiple times For example: UPDATE `catalogsearch_query` SET `query_text` = 'EW 90', `num_results` = '7532', `popularity` = '99180', `redirect` = NULL, `synonym_for` = NULL, `store_id` = '1', `display_in_terms` = '1', `is_active` = '1', `is_processed` = '1', `updated_at` = '2012-05-08 21:38:31' WHERE (query_id='31'); This query took 17sec to complete one time, rest of the time around .079 sec. But varies, sometimes 1sec, sometimes .004 sec. This is running the same query, over and over with a couple seconds time in between each. Most tables are innodb, and sometimes I noticed the lock time taking 90% of the query execution time, but most of the time lock time is insignificant. Any idea what's going on here?

    Read the article

  • Varnish + Plesk : vhost broken

    - by Raphaël
    I have an e-commerce site with 300,000 products and 20,000 categories. It is slow and currently in production. I decided to install Varnish to speed up. The trouble is that during installation, I got a Guru Meditation. Since the site is in production, I am not allowed to leave this error more than a second, thinking to have made an enormous stupidity. I followed the following tutorial: http://www.euperia.com/linux/setting-up-varnish-with-apache-tutorial I'm sure I followed all without error. I say that there may be a specific configuration with plesk. Has anyone already installed Varnish on a ubuntu 11.04 server with plesk 10? Does anyone have a better resource? I know it is "very vague" as an error, but maybe some of you have had this problem. edit 24/11/2011 I continued to work on Varnish + Plesk ... but it still does not work. 1) I changed the port for apache in plesk General # mysql -uadmin -p`cat /etc/psa/.psa.shadow` -D psa -e'replace into misc (param, val) values ("http_port", 8008)' 1.1) I rebuild the server conf # /usr/local/psa/admin/bin/httpdmng --reconfigure-all 2) I changed the apache conf files (if those were not taking full plesk top) vim /etc/apache2/ports.conf NameVirtualHost *:8008 Listen 8008 2.1) I do the same with /etc/apache2/sites-enables/000-default 3) I changed the port of my vhost (a single server) vim /var/www/vhosts/MYDOMAIN.COM/conf/XXXXXXXXX.http.include Replace the port 80 by this I want. Rebuild the vhost conf /usr/local/psa/admin/sbin/websrvmng --reconfigure-vhost --vhost-name=<domain_name> with without www (See my issue in serverfault: Edit vhost port in plesk 10.3 ) 4) I installed varnish by following this tutorial : http://www.euperia.com/linux/setting-up-varnish-with-apache-tutorial 5) I restart apache 2 + varnish service apache2 restart service varnish restart When I go to my site, I come across a page of apache It works! This is the default web page for this server. The web server software is running but no content has been added, yet. Can somebody help me ? This means that my vhost does not point to the right place. Why? What to do? How?

    Read the article

  • Cannot browse network shares in Windows Explorer, but paths are still accessible

    - by Jeff Lockhart
    Windows Explorer has somehow corrupted itself and I'm not sure how to fix this problem. My Windows installation has been in use for a few years with network shares setup and working. Recently, I noticed that a program that I use to save network share paths to a database was no longer opening the explorer window to browse the path. It usually opens to the last path saved, but now it was just not opening at all. When I go to Windows Explorer to browse the network share directly, I get the error \\SERVER is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The specified network provider name is invalid. The network shares are just shares on the server itself (once saved to the database, they're used on the server as well as clients to reach files). The strange thing is, the files are still accessible from the program that uses them if I type the network share path in manually. So it is only a problem with Windows Explorer browsing the path. The reason I think there is some sort of configuration or setting, possibly in the registry, corrupted is that when the problem first manifest itself, I was somehow able to open an explorer window to a network share path, but the breadcrumb in the address bar did not function properly. It duplicated the share name folder at the top of the breadcrumb stack and when I clicked the second of the duplicated share folder, it crashed explorer.exe. I haven't been able to browse any network share path since this happened. I have tried using the IP address directly \\192.168.1.# as well as \\localhost and neither of those work either. I have tried running sfc /scannow and it did not find any errors. I tried ipconfig /flushdns and this made no difference. Attempting to map the network share to a drive fails using either the explorer GUI or net use command. Is there some way to reset Windows Explorer somehow to resolve this? I'd really like to avoid reinstalling Windows entirely if I can.

    Read the article

  • Remote installing an msi on citrix servers using WMI

    - by capn
    OK, I'm a C# programmer that is trying to streamline the deployment of a custom windows form app I inherited and built an installer for with WiX (this app will need to be reinstalled regularly as I'm making changes to it). I'm not really used to admin type things (or vbs, or WMI, or terminal servers, or Citrix, and even WiX and MSI are not things I usually deal with) but so far I put together some vbs and have an end goal in mind. The msi does work, and I've installed it from the mapped O: drive on my dev machine and while RDP'd to a citrix machine. End Goal: Deploy code written on my dev machine and compiled into an MSI (that I can improve upon within the confines of WiX and whatever the Windows Installer Engine allows) to the cluster of Citrix machines my users have access to. What am I missing in my script to get the MSI to execute on the remote machines? Layout: Machine A is my dev machine, and has the vbs script and the msi file (XP SP3) Machines C1 - C6 are the Citrix Servers that need the application installed them via the msi (Server 2003 R2 SP2) There is also optionally a shared network resource that all the machines can access. Script: 'Set WMI Constants Const wbemImpersonationLevelImpersonate = 3 Const wbemAuthenticationLevelPktPrivacy = 6 'Set whether this is installing to the debug Citrix Servers Const isDebug = true 'Set MSI location 'Network location yields error 1619 (This installation package could not be opened.) msiLocation = "\\255.255.255.255\odrive\Citrix Deployment\Setup.msi" 'Directory on machine A yields error 3 (file not found) 'msiLocation = "C:\Temp\Deploy\Setup.msi" 'Mapped network drive (on both machines) yield error 3 (file not found) 'msiLocation = "O:\Citrix Deployment\Setup.msi" 'Set login information strDomain = "MyDomain" Wscript.StdOut.Write "user name:" strUser = Wscript.StdIn.ReadLine Set objPassword = CreateObject("ScriptPW.Password") Wscript.StdOut.Write "password:" strPassword = objPassword.GetPassword() 'Names of Citrix Servers Dim citrixServerArray If isDebug Then citrixServerArray = array("C4") Else 'citrixServerArray = array("C1","C2","C3","C5","C6") End If 'Loop through each Citrix Server For Each citrixServer in citrixServerArray 'Login to remote computer Set objLocator = CreateObject("WbemScripting.SWbemLocator") Set objWMIService = objLocator.ConnectServer(citrixServer, _ "root\cimv2", _ strUser, _ strPassword, _ "MS_409", _ "ntlmdomain:" + strDomain) 'Set Remote Impersonation level objWMIService.Security_.ImpersonationLevel = wbemImpersonationLevelImpersonate objWMIService.Security_.AuthenticationLevel = wbemAuthenticationLevelPktPrivacy 'Reference to a process on the machine Dim objProcess : Set objProcess = objWMIService.Get("Win32_Process") 'Change user to install for terminal services errReturn = objProcess.Create _ ("cmd.exe /c change user /install", Null, Null, intProcessID) WScript.Echo errReturn 'Install MSI here 'Reference to a product on the machine Set objSoftware = objWMIService.Get("Win32_Product") 'All users set in option parameter, I'm led to believe that the third parameter is actually ignored 'http://www.webmasterkb.com/Uwe/Forum.aspx/vbscript/2433/Installing-programs-with-VbScript errReturn = objSoftware.Install(msiLocation,"ALLUSERS=2 REBOOT=ReallySuppress",True) Wscript.Echo errReturn 'Change user back to execute errReturn = objProcess.Create _ ("cmd.exe /c change user /execute", Null, Null, intProcessID) WScript.Echo errReturn Next I also tried using this to install, it doesn't return an error code, but doesn't install the msi either, and it makes me wonder if the change user /install command is even really working. errReturn = objProcess.Create _ ("cmd.exe /c msiexec /i ""O:\Citrix Deployment\Setup.msi"" /quiet") Wscript.Echo errReturn

    Read the article

  • How do I troubleshoot root cause of a hung windows (2003) server?

    - by GregW
    I have a pair of Windows (2003 Server) servers both running MS SQL Server (2008 EE) that each hang every few months. This has been occurring intermittently :( for the past 15 months pretty much since we started using the servers. The symptoms are as-follows: I cannot remote desktop in to troubleshoot; when I attempt to, I get stuck on a blank black screen and am never offered a login prompt I can still ping the servers I can still open a SQL connection to the server, and, CURIOUSLY/BIZARRELY, when I do a "select getdate()", the time it returns appears to be stuck on the exact fraction of a second when (I presume) the server hung. Repeated attempts to do "select getdate()" keep getting that same date, suggesting that the clock is frozen. Filesharing attempts to connect to the hung server fail with the error message: "\ServerName is not accessible. You might not have permissions to use this network resource. Contact the administrator of this server to find out if you have access permissions. The server's clock is not synchronized with the primary domain controller's clock." This is consistent with a frozen clock. Post-reboot, if I investigate the Windows Event Viewer logs, I can see many security accesses (coming from me and others) that I recognize were login attempts during the "down" period, but all of them in the security log are associated with that same timestamp of when the server hung. This also suggests the clock is frozen. There is not a clear cause in the Application or System event logs. I have a local Admin account on the server and am in the process of getting a domain-credentialed Admin account for better remote admin access. HP is supposed to be supporting these machines and has some low-level ILO2 access but they seem incapable of finding the root cause. A reboot will "fix" the problem but I would like to get to the root cause and solve the issue. Has anyone ever seen something like this odd clock behavior?! (If it were just one server I'd perhaps say a bad hardware clock, but two?) Can anyone advise me on what I should try to troubleshoot this sort of situation to find the root cause (or what I should tell HP to try?)

    Read the article

  • Tomcat with virtual hosts - 404

    - by Thardas
    I have a CentOS 5.2 server set up with Apache 2.2.3 and Tomcat 5.5.27. The server hosts multiple virtual hosts connected to multiple Tomcats. For instance we have one tomcat for development and testing and one tomcat for production. project.demo.us.com points to dev tomcat and project.us.com points to production tomcat. Here's the virtual host's configuration: <VirtualHost *:80> ServerName project.demo.us.com CustomLog logs/project.demo.us.com/access_log combined env=!VLOG ErrorLog logs/project.demo.us.com/error_log DocumentRoot /var/www/vhosts/project.demo.us.com <Directory /var/www/vhosts/project.demo.us.com> Allow from all AllowOverride All Options -Indexes FollowSymLinks </Directory> ########## ########## ########## JkMount /project/* online </VirtualHost> JkMount line defines that we use online worker and our workers.properties contains this: worker.list=..., online, ... worker.online.port=7703 worker.online.host=localhost worker.online.type=ajp13 worker.online.lbfactor=1 And tomcat's conf/server.xml contains: <Connector port="7703" enableLookups="false" redirectPort="8443" protocol="AJP/1.3" URIEncoding="UTF-8" maxThreads="80" minSpareThreads="10" maxSpareThreads="15"/> I'm not sure what redirectPort is but I tried to telnet to that port and there's no one answering, so it shouldn't matter? Tomcat's webapps directory contains project.war and the server automatically deployed it under project directory which contains index.jsp and hello.html. The latter is for static debugging purposes. Now when I try to access http://project.demo.us.com/project/index.jsp, I get Tomcat's HTTP Status 404 - The requested resource () is not available. The same thing happens to hello.html so it's not working with static content either. Apache's access_log contains: 88.112.152.31 - - [10/Aug/2009:12:15:14 +0300] "GET /demo/index.jsp HTTP/1.1" 404 952 "-" "Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.5; en-US; rv:1.9.1.2) Gecko/20090729 Firefox/3.5.2" I couldn't find any mention of the request in Tomcat's logs. If I shutdown this specific tomcat, I no longer get Tomcat's 404 but Apache's 503 Service Temporarily Unavailable, so I should be configuring the correct Tomcat. Is there something obvious that I'm missing? Is there any place where I could find out what path the Tomcat is using to look for requested files?

    Read the article

< Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >