Search Results

Search found 16602 results on 665 pages for 'directory'.

Page 223/665 | < Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >

• Where to get glib-config for Kubuntu?

  - by Carl Smotricz

  I'm trying to compile Midnight Commander on a KUbuntu 9.10 (Karmic) box with no root access. I've set up a directory under $HOME, downloaded the mc source package and various stuff required for building, such as autotools. I've unpacked the CONTENTS of all those packages into this working directory such that I have the usual ./usr, ./lib, ./etc hierarchy. I manage to get configure through a lot of tests, but I can't seem to fool it into finding glib. checking for glib-2.0... checking for glib-config... no checking for glib12-config... no checking for glib-config... no checking for GLIB - version >= 1.2.6... no *** The glib-config script installed by GLIB could not be found *** If GLIB was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the GLIB_CONFIG environment variable to the *** full path to glib-config. configure: error: Test for glib failed. GNU Midnight Commander requires glib 1.2.6 or above. My system has glib installed: /lib/libglib-2.0.so.0 /lib/libglib-2.0.so.0.2200.3 ... and I've also downloaded and unpacked the glib package into my working directory: libglib2.0-0_2.22.2-0ubuntu1_i386.deb libglib2.0-dev_2.22.2-0ubuntu1_i386.deb ... but still the elusive glib-config is nowhere to be found. It's not in any debian package for Karmic, either. So I'd appreciate any help getting over this hurdle. Please note, again, that I don't have root, so I can't just merrily apt-get stuff.

  Read the article

• URL Rewriting on GoDaddy Virtual Server

  - by Aristotle

  I migrated a Kohana2 application from a shared-hosting environment over to a virtual dedicated server. After this migration, I can't seem to get my .htaccess file working again. I apologize up front, but over the years I have never experienced so much frustration with anything else as I do with the dreaded .htaccess file. Presently I have my project installed immediately within a directory in my public folder: /var/html/www/info.php (general information about server) /var/html/www/logo.jpg (some flat file) /var/html/www/somesite.com/[kohana site exists here] So my .htaccess file is within that directory, and has the following contents: # Turn on URL rewriting RewriteEngine On # Installation directory RewriteBase /somesite.com/ # Protect application and system files from being viewed # This is only necessary when these files are inside the webserver document root RewriteRule ^(application|modules|system) - [R=404,L] # Allow any files or directories that exist to be displayed directly RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d # Rewrite all other URLs to index.php/URL RewriteRule .* index.php?kohana_uri=$0 [PT,QSA,L] # Alternativly, if the rewrite rule above does not work try this instead: #RewriteRule .* index.php?kohana_uri=$0 [PT,QSA,L] This doesn't work. The initial controller is loaded, since index.php is called up implicitly when nothing else is in the url. But if I try to load up some other non-default controller, the site fails. If I place the index.php back within the url, the call to other controllers works just fine. I'm really at my wits end, and would appreciate some direction here.

  Read the article

• PECL install error after upgrading to OSX 10.8

  - by Clive

  I've just upgraded my OS to Mountain Lion and PECL is no longer working (it's on a test drive so no drama, but I'd like to get it working so I can upgrade the OS on my shiny new SSD as well). I'm using the native PHP installation, no macports/homebrew or anything like that. Running sudo pecl install uploadprogress (for example) produces the following terminal output: downloading uploadprogress-1.0.3.1.tgz ... Starting to download uploadprogress-1.0.3.1.tgz (9,040 bytes) .....done: 9,040 bytes 4 source files, building running: phpize grep: /usr/include/php/main/php.h: No such file or directory grep: /usr/include/php/Zend/zend_modules.h: No such file or directory grep: /usr/include/php/Zend/zend_extensions.h: No such file or directory Configuring for: PHP Api Version: Zend Module Api No: Zend Extension Api No: autom4te: need GNU m4 1.4 or later: /usr/bin/m4 ERROR: `phpize' failed I'm guessing the problem is the 3 grep lines. I've found several threads that suggest this is caused by XCode not being installed...but XCode is installed, and updated to the latest version (4.4). All the relevant symlinks to /Developer/usr/bin/* also exist as they should. m4 is currently at version: m4 (GNU M4) 1.4.13, so even though the output above contains a line pertaining to it, I don't think that can be the problem. I'm sure it's just a simple issue, anyone got any clues?

  Read the article

• File upload permissions issue on Windows Server 2008 R2 IIS 7.5 PHP 5.3 with Drupal v.7.26

  - by Taras

  I have website on Drupal version: 7.26 OS on server is Windows Server 2008 R2 Web server $_SERVER["SERVER_SOFTWARE"]: Microsoft-IIS/7.5 Server API: CGI/FastCGI Core PHP Version: 5.3.28 file_uploads: On post_max_size: 75M upload_max_filesize: 50M upload_tmp_dir: C:\inetpub\wwwroot\tmp memory_limit: 128M open_basedir: C:\inetpub\wwwroot;C:\inetpub\wwwroot\tmp When I go to /admin/config/media/file-system I see error messages: The directory sites\default\files exists but is not writable and could not be made writable. The directory tmp exists but is not writable and could not be made writable. Public file system path: sites\default\files Temporary directory: tmp I have set permissions on folders C:\inetpub\wwwroot\tmp : IIS_IUSRS : Full control C:\inetpub\wwwroot\sites\default\files : IIS_IUSRS : Full control I am working as Administrator user: C:\Users\Administrator\Downloadsecho %username% Administrator I can`t change Read Only Attributes for these folders. Every time I do this change and press Apply button and Apply changes to this folder, subfolders and files is checked and press OK button it displays Applying attributes... dialog when it finishing I press OK button on folder properties dialog closing it. When I open Properties dialog once again I see Read-only is checked again. How can I fix it?

  Read the article

• Re: How can Django/WSGI and PHP share / on Apache?

  - by Bogdan

  in response to: How can Django/WSGI and PHP share / on Apache? Hello, could you please post the complete config file from /sites-available I am having a problem seems like rewrite engine redirects all requests to django, so static and php files are not served and instead i see the django 404 page. If I get rid of rewrite rule then static files and php works. here is my apache config file from /sites-available <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /home/www/django <Directory /> Options +FollowSymLinks ExecCGI Indexes AllowOverride None DirectoryIndex index.php AddHandler wsgi-script .wsgi </Directory> RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ /mysite.wsgi/$1 [QSA,PT,L] ~ and my .wsgi file: import site site.addsitedir('/home/user/.virtualenvs/url.com/lib/python2.6/site-packages') import os, sys path = '/home/www/django' if path not in sys.path: sys.path.append(path) os.environ['DJANGO_SETTINGS_MODULE'] = 'mysite.settings' sys.path.append(path + '/mysite') import django.core.handlers.wsgi _application = django.core.handlers.wsgi.WSGIHandler() import posixpath def application(environ, start_response): # Wrapper to set SCRIPT_NAME to actual mount point. environ['SCRIPT_NAME'] = posixpath.dirname(environ['SCRIPT_NAME']) if environ['SCRIPT_NAME'] == '/': environ['SCRIPT_NAME'] = '' return _application(environ, start_response) the document root directory on disk (/home/www/django) contains php files, images, and the mysite.wsgi file.. thanks for your help

  Read the article

• Configure Plesk only for Tomcat-Java

  - by AJIT RANA

  I need to configure tomcat on Linux dedicate server only for Java project through Plesk . Following services is running on it. '1.Apache on port 80 ' '2.Tomcat on port 8080/9080' '3.Mysql on port 3306 ' Now problem is this, i need to run only java project on this server from port 80 .this time user type my site name then default page call index.html or .php file from root directory of Apache. so how it can be possible to run java project from this server default port 80 after deploye .war(java project) file to this server. Because user who wants to access my site does not know its port number for Tomcat as here is 9080 and also deploy file name. Pls look below for detail about problem Suppose my sit name is www.example.com and hosted on Linux dedicate server with Plesk install on it with Apache, Tomcat and Mysql. Now for running my java project on it, i need to enter www.example.com:9080/java_projrect_name/ in browser. So how can i run this project only from URL www.example.com and it will call default file .jsp from java_project_name directory. I do not want to enter port number and java_project_name in url and my client who wants to access this project did not know about port number as well as project name . He knows only about URL as www.example.com and when he browses it then it should call default page from java_project directory. So to implement this what should we need to do? Pls help. Thanks

  Read the article

• Linux (NAS) Permissions problem (Permission Denied)

  - by calumbrodie

  This is probably easier to show than to explain... -bash-3.2$ id uid=501(admin) gid=503(admin) groups=100(users),501(admins),503(admin) -bash-3.2$ groups admin users admins -bash-3.2$ ls -l total 8 drwxrwxrwx 78 admin www 4096 Dec 9 09:02 Inbox drwxrwxrwx 21 admin www 4096 Dec 8 21:45 Movies drwxrwx--- 3 admin www 52 Dec 9 07:57 TV -bash-3.2$ cd Movies -bash-3.2$ ls -l total 20 drwxrwx--- 7 admin www 4096 Dec 8 00:04 Action drwxrwx--- 6 admin www 4096 Dec 8 00:05 Animation drwxrwx--- 4 admin www 4096 Dec 8 00:17 Comedy drwxrwx--- 4 admin www 4096 Dec 8 00:14 Drama drwxrwx--- 4 admin www 4096 Dec 8 00:14 Family drwxrwx--- 6 admin www 58 Dec 6 19:10 Foreign Language drwxrwx--- 2 admin www 31 Dec 7 23:58 Horror drwxrwx--- 3 admin www 50 Dec 8 00:15 Science Fiction drwxrwx--- 2 admin www 6 Dec 8 00:16 Thriller -bash-3.2$ cd ../Inbox -bash: cd: ../Inbox: Permission denied Filesystem is XFS. Are there permissions on the directories that ls -l wouldn't show? I'm the owner of all directories and files inside them. I can sudo to modify the file permissions or view the contents of the folders but I need them to be accessible by 'admin'. Any ideas? I'll be checking the question regularly so let me know if I need to update this with more information. Thanks Edit : Added strace execve("/bin/ls", ["ls", "Inbox"], [/* 21 vars */]) = 0 brk(0) = 0x26000 uname({sys="Linux", node="axentraserver.the-brodie-stora.mystora.com", ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001c000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=17972, ...}) = 0 mmap2(NULL, 17972, PROT_READ, MAP_PRIVATE, 3, 0) = 0x4001d000 close(3) = 0 open("/lib/librt.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0P\25\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=39776, ...}) = 0 mmap2(NULL, 57816, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40025000 mprotect(0x4002b000, 28672, PROT_NONE) = 0 mmap2(0x40032000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5) = 0x40032000 close(3) = 0 open("/lib/libacl.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\0\24\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=134375, ...}) = 0 mmap2(NULL, 54368, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40034000 mprotect(0x4003a000, 28672, PROT_NONE) = 0 mmap2(0x40041000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5) = 0x40041000 close(3) = 0 open("/lib/libselinux.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\2147\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=297439, ...}) = 0 mmap2(NULL, 117504, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40042000 mprotect(0x40056000, 28672, PROT_NONE) = 0 mmap2(0x4005d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13) = 0x4005d000 close(3) = 0 open("/lib/libgcc_s.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\10\"\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=43164, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40022000 mmap2(NULL, 74572, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x4005f000 mprotect(0x4006a000, 28672, PROT_NONE) = 0 mmap2(0x40071000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xa) = 0x40071000 close(3) = 0 open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0XI\1\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1517948, ...}) = 0 mmap2(NULL, 1245628, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40072000 mprotect(0x40195000, 32768, PROT_NONE) = 0 mmap2(0x4019d000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x123) = 0x4019d000 mmap2(0x401a0000, 8636, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x401a0000 close(3) = 0 open("/lib/libpthread.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\230A\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=121044, ...}) = 0 mmap2(NULL, 115184, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x401a3000 mprotect(0x401b5000, 28672, PROT_NONE) = 0 mmap2(0x401bc000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11) = 0x401bc000 mmap2(0x401be000, 4592, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x401be000 close(3) = 0 open("/lib/libattr.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\364\f\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=40571, ...}) = 0 mmap2(NULL, 45512, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x401c0000 mprotect(0x401c3000, 32768, PROT_NONE) = 0 mmap2(0x401cb000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3) = 0x401cb000 close(3) = 0 open("/lib/libdl.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\254\10\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=15344, ...}) = 0 mmap2(NULL, 41116, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x401cc000 mprotect(0x401ce000, 28672, PROT_NONE) = 0 mmap2(0x401d5000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0x401d5000 close(3) = 0 open("/lib/libsepol.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\330/\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=228044, ...}) = 0 mmap2(NULL, 301748, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x401d7000 mprotect(0x4020f000, 28672, PROT_NONE) = 0 mmap2(0x40216000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x37) = 0x40216000 mmap2(0x40217000, 39604, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40217000 close(3) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40221000 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40222000 set_tls(0x40221d00, 0x40221d00, 0x40024000, 0x402223e8, 0x41) = 0 mprotect(0x401d5000, 4096, PROT_READ) = 0 mprotect(0x401bc000, 4096, PROT_READ) = 0 mprotect(0x4019d000, 8192, PROT_READ) = 0 mprotect(0x4005d000, 4096, PROT_READ) = 0 mprotect(0x40032000, 4096, PROT_READ) = 0 mprotect(0x40023000, 4096, PROT_READ) = 0 munmap(0x4001d000, 17972) = 0 set_tid_address(0x402218a8) = 9539 set_robust_list(0x402218b0, 0xc) = 0 rt_sigaction(SIGRTMIN, {0x401a6d90, [], SA_SIGINFO|0x4000000}, NULL, 8) = 0 rt_sigaction(SIGRT_1, {0x401a6c64, [], SA_RESTART|SA_SIGINFO|0x4000000}, NULL, 8) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0 brk(0) = 0x26000 brk(0x47000) = 0x47000 open("/proc/mounts", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000 read(3, "rootfs / rootfs rw 0 0\nubi0:root"..., 1024) = 1024 read(3, "fs.xino,noplink,create=mfs,sum,b"..., 1024) = 428 read(3, "", 1024) = 0 close(3) = 0 munmap(0x4001d000, 4096) = 0 access("/etc/selinux/", F_OK) = 0 open("/etc/selinux/config", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory) ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(1, TIOCGWINSZ, {ws_row=52, ws_col=153, ws_xpixel=918, ws_ypixel=728}) = 0 stat64("Inbox", {st_mode=S_IFDIR|0777, st_size=4096, ...}) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/nsswitch.conf", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1696, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000 read(3, "#\n# /etc/nsswitch.conf\n#\n# An ex"..., 4096) = 1696 read(3, "", 4096) = 0 close(3) = 0 munmap(0x4001d000, 4096) = 0 open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=17972, ...}) = 0 mmap2(NULL, 17972, PROT_READ, MAP_PRIVATE, 3, 0) = 0x4001d000 close(3) = 0 open("/lib/libnss_files.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\304\27\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=49256, ...}) = 0 mmap2(NULL, 70316, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40223000 mprotect(0x4022c000, 28672, PROT_NONE) = 0 mmap2(0x40233000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8) = 0x40233000 close(3) = 0 mprotect(0x40233000, 4096, PROT_READ) = 0 munmap(0x4001d000, 17972) = 0 open("/etc/passwd", O_RDONLY) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=1661, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 1661 close(3) = 0 munmap(0x4001d000, 4096) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/group", O_RDONLY) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=700, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000 read(3, "root:x:0:root\nbin:x:1:root,bin,d"..., 4096) = 700 close(3) = 0 munmap(0x4001d000, 4096) = 0 open("Inbox", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = -1 EACCES (Permission denied) write(2, "ls: ", 4ls: ) = 4 write(2, "Inbox", 5Inbox) = 5 write(2, ": Permission denied", 19: Permission denied) = 19 write(2, "\n", 1 ) = 1 close(1) = 0 exit_group(2) = ? 2nd edit: Elaboration for Mike. The Inbox sits at the following location /home/admin/MyLibrary/MyVideos/Inbox /home/admin/MyLibrary/MyVideos/Movies The system is a Netgear Stora NAS box that I have root access to. The /home/ folder is mounted as an smb share on various computers around the house. The folder /Inbox cannot be opened on any of those machines (they all connect as 'admin'). When I ssh into the box using the 'admin' credentials I am also unable to access the folder. The folder was created via a Web Admin page hosted on the NAS. The user/group for the Inbox folder was previously apache:www (expected as this folder was created by the web application), but I chmod/chowned the folder as the root user in an attempt to grant the admin user (therefore the rest of the connected machines) access to the files. Sorry for not including this earlier, I wasn't sure if it was relevant and didn't want to confuse the situation. -Thanks 3rd Edit Sorry again - It looks like this NAS is running some custom version of Red Hat, not Debian as previously stated - I'm not sure if this makes a difference

  Read the article

• MySQL tmpdir on /dev/shm with SELinux

  - by smorfnip

  On RHEL5, I have a small MySQL database that has to write temp files. To speed up this process, I would like to move the temporary directory to /dev/shm by putting the following line into my.cnf: tmpdir=/dev/shm/mysqltmp I can create /dev/shm/mysqltmp just fine and do chown mysql:mysql /dev/shm/mysqltmp chcon --reference /tmp/ /dev/shm/mysqltmp I've tried to make SELinux happy by applying the same settings that are in effect for /tmp/ (and /var/tmp/), which is presumably where MySQL is writing its tmp files if tmpdir is undefined. The problem is that SELinux complains about MySQL having access to that directory. I get the following in /var/log/messages: SELinux is preventing mysqld (mysqld_t) "getattr" to /dev/shm (tmpfs_t). SELinux is a hard mistress. Details: Source Context root:system_r:mysqld_t Target Context system_u:object_r:tmpfs_t Target Objects /dev/shm [ dir ] Source mysqld Source Path /usr/libexec/mysqld Port <Unknown> Host db.example.com Source RPM Packages mysql-server-5.0.77-3.el5 Target RPM Packages Policy RPM selinux-policy-2.4.6-255.el5_4.1 Selinux Enabled True Policy Type targeted MLS Enabled True Enforcing Mode Enforcing Plugin Name catchall_file Host Name db.example.com Platform Linux db.example.com 2.6.18-164.2.1.el5 #1 SMP Mon Sep 21 04:37:42 EDT 2009 x86_64 x86_64 Alert Count 46 First Seen Wed Nov 4 14:23:48 2009 Last Seen Thu Nov 5 09:46:00 2009 Local ID e746d880-18f6-43c1-b522-a8c0508a1775 ls -lZ /dev/shm shows drwxrwxr-x mysql mysql system_u:object_r:tmp_t mysqltmp and permissions for /dev/shm itself are drwxrwxrwt root root system_u:object_r:tmpfs_t shm I've also tried chcon -R -t mysqld_t /dev/shm/mysqltmp and setting the group on /dev/shm to mysql with no better results. Shouldn't it be enough to tell SELinux, hey, this is a temp directory just like MySQL was using before? Short of turning off SELinux, how do I make this work? Do I need to edit SELinux policy files?

  Read the article

• VMWare Fusion: "No Permission to access this virtual machine"

  - by Craig Walker

  I had a VMWare Fusion VM backed up on my home network file server (Ubuntu). I wanted to run it again, so I copied it back to my Macbook. When I tried to launch it in VMWare, I got an error message: No permission to access this virtual machine. Configuration file: /Users/craig/WinXP Clean + Scanner.vmwarevm/WinXP Pro Test.vmx The permissions look fine to me: The bundle directory is 777 The bundle files (including the listed .vmx) are all 666 User is craig (my current user); group is staff. I changed the group to wheel at the suggestion of this page, but that didn't help. Finder shows read & write for craig, staff, and everyone on the bundle directory The bundle dir is also not locked Finder also shows rw and unlocked for the .vmx file The parent directory is also rw & unlocked Disk Utility permissions check doesn't show any problems with any of the associated files It sure looks like I should have wide open access to run this VM; why is Fusion complaining?

  Read the article

• Problem while Installing mysql cluster

  - by Champion

  I downloaded latest mysql cluster file 64 bit (mysql-cluster-gpl-7.1.9-linux-x86_64-glibc23) from mysql site. Ran following command to install mysql server. /home/mysql_cluster/mysqlc/scripts/mysql_install_db --no-defaults --basedir=/home/mysql_cluster/mysqlc --datadir=/home/mysql_cluster/my_cluster/mysqld_data It's giving following issues. /home/mysql_cluster/mysqlc/scripts/mysql_install_db: line 245: /home/mysql_cluster/mysqlc/bin/my_print_defaults: No such file or directory Neither host 'db' nor 'localhost' could be looked up with /home/mysql_cluster/mysqlc/bin/resolveip Please configure the 'hostname' command to return a correct hostname. If you want to solve this at a later stage, restart this script with the --force option My host is pinging and hostname command gives correct hostname. I tried also with --force option force but still not working giving following issues: /home/mysql_cluster/mysqlc/scripts/mysql_install_db: line 245: /home/mysql_cluster/mysqlc/bin/my_print_defaults: No such file or directory Installing MySQL system tables... /home/mysql_cluster/mysqlc/scripts/mysql_install_db: line 393: /home/mysql_cluster/mysqlc/bin/mysqld: No such file or directory Installation of system tables failed! Examine the logs in /home/mysql_cluster/my_cluster/mysqld_data for more information. It says above files doesn't exist but this files are present checked with ls command. We are using XEN VM with 64 bit debian lenny os. How this issue can be resolved ?

  Read the article

• How can I access a webDAV folder as a UNC share?

  - by Amar

  first of all I am just getting to know about webDAV and appreciate your patience. I have a virtual directory on IIS 6 (windows 2003) that is based on a network share on a file server different from web server. something like www.mysite.com/myreports where myreport is based on \myfileserver\reports. I have been asked by network folks to not use the UNC path like that for security reason and try to explore using webDAV. What I have been told is webDAV can give me a UNC path without requiring to open the ports required for a file server UNC path. Then I can use the new UNC path to map my virtual directory and my asp.net code will not require any change. Help: Being new to webDAV, I did some research over the web. I now can create a web folder in fileserver. I put IIS on file server as well. I can browse the content as http:://fileserver/mywebDAVreports which is based on reports folder. But I don't know how to get a UNC for this web folder to be able to map my virtual directory on web server. I appreciate any help on this. Regards, Amar

  Read the article

• Not Able To Connect to Windows Server 2008 R2 using FileZilla Externally

  - by obautista

  I configured FTP Service/Role on my Windows Server 2008 R2 machine. I am able to connect from the inside, but not from the outside. On the inside I tested using cmd prompt and IE FTP. On the outside, I am testing with FileZilla and IE FTP. From the outside, IE FTP prompts me to enter my username/pwd, but nothing happens. Page eventually times out and I get "Internet Explorer cannot display page". Using FileZilla, I get the following messages. Note FileZilla resolved domain name and authenticates. I did not configure FTP Wirewall Support on the FTP site. I am not sure if I need to do this. I set up basic authentication, non-ssl, not allowing anonymous. I testing with Windows Firewall Turned off and on (I added windows firewall rule for port 21). On my network firewall (Cisco), I added a rule to forward port 21 traffic to FTP Server. Status: Resolving address of ftp.technologyblends.com Status: Connecting to 75.149.66.201:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER * Response: 331 Password required for . Command: PASS *** Response: 230 User logged in. Command: SYST Response: 215 Windows_NT Command: FEAT Response: 211-Extended features supported: Response: LANG EN* Response: UTF8 Response: AUTH TLS;TLS-C;SSL;TLS-P; Response: PBSZ Response: PROT C;P; Response: CCC Response: HOST Response: SIZE Response: MDTM Response: REST STREAM Response: 211 END Command: OPTS UTF8 ON Response: 200 OPTS UTF8 command successful - UTF8 encoding now ON. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I. Command: PASV Error: Connection timed out Error: Failed to retrieve directory listing

  Read the article

• How does a vsftpd server work and how to configure it?

  - by ysap

  I was asked to configure a FTP server, based on the vsftpd package. The server is running on a remote machine to which I have a superuser privilege access. Being unfamiliar with the mechanics of FTP servers, I tried to figure out how user ftp accounts are configured. The previous maintainer used a shell script, which works on a list that we maintain to track users accounts and passwords, to configure the ftp accounts. From reading the script, I see that he generates a list of usernames and passwords, and actually creates a user account on the Linux machine. This means that for each user that we configure in the list, a new user account is being added by the adduser command: adduser --home /home/ftp --no-create-home $user (but w/o a private /home/username directory - using the /home/ftp instaed). Each of these users can log into his account using the ssh command. This fact seems a little strange to me, as I'd think that the ftp account should be decoupled from the Ubuntu user accounts. As another side effect, when a user connects using a web browser, he is connected to the /home/ftp directory. However, he can then use "Up to a higher level directory" link to go up and effectively have access to all of our system. So, the questions are: Is this really how the FTP server supposed to work in terms of configuring ftp accounts? If not, how do I configure the vsftpd server in a way that I have only the superuser Ubuntu account on that machine and all ftp account are... just FTP user accounts? Additionally, these ftp account should be configured in terms of how and what they are allowed to access.

  Read the article

• Is there a simple LDAP-to-HTTP gateway out there?

  - by larsks

  We have a local LDAP directory that provides basic contact information about our user community. We would like to integrate this into some third-party hosted services that allow us to implement widgets that run arbitrary Javascript. In order to connect Javascript to our LDAP directory, I would like to set up a simple LDAP-to-HTTP proxy that would accept HTTP GET requests, translate them into an appropriate LDAP query, and respond with directory information as JSON-encoded data. In an ideal world, something like this: GET /[email protected] Would get me something like this: { "cn": "Bob Person", "title": "System Administrator", "sn": "Person", "mail": "[email protected]", "telepehoneNumber": "617-555-1212", "givenName": "Bob" } (And this obviously assumes that the web application has locally configured information about what base DN to use, how to authenticate, etc). I guess I could write one...but surely something like this already exists? UPDATE The consensus seems to be that there isn't a pre-existing solution out there and that I should just get off my lazy derriere and write one. So I did, and it's here. It's not especially pretty, but it works for my prototyping and I figure maybe someone else will find it useful someday.

  Read the article

• Can't install NPM after installing Node on EC2 Linux instance?

  - by frequent

  I'm trying my first attempt on getting a node server set up on an amazon ec2 linux instance. I think I made it quite far. First problem I ran into was when trying to make Node the connection timed out after a while, so I need three attempts until I got this: LINK(target) /home/ec2-user/node/out/Release/node: Finished touch /home/ec2-user/node/out/Release/obj.target/node_dtrace_header.stamp touch /home/ec2-user/node/out/Release/obj.target/node_dtrace_provider.stamp touch /home/ec2-user/node/out/Release/obj.target/node_dtrace_ustack.stamp touch /home/ec2-user/node/out/Release/obj.target/node_etw.stamp make[1]: Leaving directory `/home/ec2-user/node/out' ln -fs out/Release/node node Which tells me, "Node is done", although I'm not sure it is also working as it should. Following this,this and this tutorial, I'm now stuck at installing npm. I think I first cloned into the wrong folder, which always gave me error 127, but even if I'm doing this: cd ~ git clone git://github.com/isaacs/npm.git cd npm sudo -s PATH=/usr/local/bin:$PATH make install I'm still getting this: #after cloning# make[1]: Entering directory `/root/npm' node cli.js install bash: node: command not found make[1]: *** [node_modules/.bin/ronn] Error 127 make[1]: Leaving directory `/root/npm' make: *** [man/man3/start.3] Error 2 Question:: Since I'm pretty much a newby at everything I'm trying here, can someone please tell me what I'm doing wrong and how to get npm to install? Also, in case I cloned into the wrong folder, is there a way to remove the "false clone" or is this not written to disk until I call make install and I don't need to worry? Thanks for helping out!

  Read the article

• Setting up Apache 2.2 + FastCGI + SuExec + PHP-FPM on Centos 6

  - by mr1031011

  I'm trying to follow this very detailed instruction here, I simply changed from www-data user to apache user, and is using /var/www/hosts/sitename/public_html instead of /home/user/public_html However, I spent the whole day trying to figure out why the php file content is displayed without being parsed correctly. I just cant's seem to figure this out. Below is my current config: /etc/httpd/conf.d/fastcgi.conf User apache Group apache LoadModule fastcgi_module modules/mod_fastcgi.so # dir for IPC socket files FastCgiIpcDir /var/run/mod_fastcgi # wrap all fastcgi script calls in suexec FastCgiWrapper On # global FastCgiConfig can be overridden by FastCgiServer options in vhost config FastCgiConfig -idle-timeout 20 -maxClassProcesses 1 # sample PHP config # see /usr/share/doc/mod_fastcgi-2.4.6 for php-wrapper script # don't forget to disable mod_php in /etc/httpd/conf.d/php.conf! # # to enable privilege separation, add a "SuexecUserGroup" directive # and chown the php-wrapper script and parent directory accordingly # see also http://www.brandonturner.net/blog/2009/07/fastcgi_with_php_opcode_cache/ # FastCgiServer /var/www/www-data/php5-fcgi #AddType application/x-httpd-php .php AddHandler php-fcgi .php Action php-fcgi /fcgi-bin/php5-fcgi Alias /fcgi-bin/ /var/www/www-data/ #FastCgiExternalServer /usr/lib/cgi-bin/php5-fcgi -socket /tmp/php5-fpm.sock -pass-header Authorization #DirectoryIndex index.php # <Location /fcgi-bin/> # Order Deny,Allow # Deny from All # Allow from env=REDIRECT_STATUS SetHandler fcgid-script Options +ExecCGI </Location> /etc/httpd/conf.d/vhost.conf <VirtualHost> DirectoryIndex index.php index.html index.shtml index.cgi SuexecUserGroup www.mysite.com mygroup Alias /fcgi-bin/ /var/www/www-data/www.mysite.com/ DocumentRoot /var/www/hosts/mysite.com/w/w/w/www/ <Directory /var/www/hosts/mysite.com/w/w/w/www/> Options -Indexes FollowSymLinks AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> PS: 1. Also, with PHP5.5, do I even need FPM or is it already included? 2. I'm using mod_fastcgi, not sure if this is the problem and it I should switch to mod_fcgid? There seems to be conflicting records on the internet considering which one is better. I have many virtual hosts running on the machine and hope to be able to provide each user with their own opcache

  Read the article

• mod_wsgi, .htaccess and rewriterule

  - by hadaraz

  I'm using several django projects running on the same apache instance through mod_wsgi, configured with virtualhost for each site, see the httpd.conf here. For one of the sites I want to use static-cache (staticgenerator), so I set up a directory with .htaccess file which contains: RequestHeader unset X-Forwarded-Host RewriteEngine on RewriteBase / RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME}/index.html !-f RewriteRule ^(.*) http://127.0.0.1:3456/$1 [P] where 3456 is the django port on the server. Using this rewrite rule, the request is always forwarded to the mod_wsgi handler, even if the file or directory exists, and if the file index.html exists the request shows as request-path/index.html. I tried another setup: RequestHeader unset X-Forwarded-Host RewriteEngine on RewriteBase / RewriteCond $1 !-d RewriteCond $1index.html !-f RewriteRule ^(.*) http://127.0.0.1:3456/$1 [P] but got almost the same results. All requests are transferred to the mod_wsgi handler, but the request path is now the original one. To sum it up: What is the correct RewriteCond to use here? How do you transfer a request to the mod_wsgi handler? Is it the right way? If that's not the way to do it, then how do you serve static files from a directory when they exist, and when they don't you serve from apache/mode_wsgi? Thanks for your help.

  Read the article

• Configuring vsftpd with nginx on Ubuntu 12.04 LTS

  - by arby

  I've attempted to configure a nginx / vsftpd server on Ubuntu 12.04 LTS (via amazon ec2) a couple times now, but I seem to keep making a mistake along the way. Currently, when I try to connect to my ftp server it takes a minute or so before it connects. Then when I issue a command, they all timeout with an operation failed error. Aside from these issues, I'm not completely confident with the file ownership & permissions or the configuration / settings. So, I think it's best if I just re-install and re-configure correctly. I believe the nginx installation comes with a default user of www-data:www-data and web root directory ownership by root:root. Vsftpd, however, needs to have a user created with the same group as the nginx user (www-data), and the same home directory as the nginx server (/usr/share/nginx/www), with g+w chmod permissions granted on that directory. The vsftpd.conf file should disable anonymous logins and enable local logins, file writing, and chroot local users. In my previous config, I had /bin/false set for the ftp user's shell and pam_shells.so disabled. I also had local_umask set to 0027. So, starting with a fresh ec2 instance, I've got: sudo apt-get install vsftpd sudo apt-get install nginx For the firewall I issued the command (not sure if necessary): sudo ufw allow ftp Which commands / config is recommended from here? I only need 1 ftp user that I can use to login with my ftp client to modify the single nginx web domain, which will need php & sql for WordPress.

  Read the article

• Making Apache 2.2 on SuSE Linux Case In-Sensitive. Which is a better approach?

  - by pingu

  Problem: http://<server>/home/APPLE.html http://<server>/hoME/APPLE.html http://<server>/HOME/aPPLE.html http://<server>/hoME/aPPLE.html All the above should pick this http://<server>/home/apple.html I implemented 2 solutions and both are working fine. Not sure which one is better(performance). Please Suggest..Also Directive - CheckCaseOnly on never worked Option 1: a)Enable:mod_speling In /etc/sysconfig/apache2 - APACHE_MODULES="rewrite speling apparmor......" b) Add directive - CheckSpelling on (Either in .htaccess or add in httpd.conf) In httpd.conf <Directory srv/www/htdcos/home> Order allow,deny CheckSpelling on Allow from all </Directory> or In .htaccess inside /srv/www/htdcos/home(your content folder) CheckSpelling on Option 2: a) Enable: mod_rewrite b) Write the rule vhost(you can not write RewriteMap in directory. check apache docs ) <VirtualHost _default_:80> <IfModule mod_rewrite.c> Options +FollowSymLinks RewriteEngine on RewriteMap lc int:tolower RewriteCond %{REQUEST_URI} [A-Z] RewriteRule (.*) ${lc:$1} [R=301,L] </IfModule> </VirtualHost> <VirtualHost _default_:80> <IfModule mod_rewrite.c> Options +FollowSymLinks RewriteEngine on RewriteMap lc int:tolower RewriteCond %{REQUEST_URI} [A-Z] RewriteRule (.*) ${lc:$1} [R=301,L] </IfModule> </VirtualHost> This changes the entire request uri into lowercase. I want this to happen for specific folder, but RewriteMap doesn't work in .htaccess. I am novice in regex and Rewrite. I need a RewriteCond which checks only /css//. can any body help

  Read the article

• Weird permission issue with POSIX ACLs, NFS v3 on Linux

  - by jon

  I have two Linux systems, both running Debian Squeeze. Versions of (I think) the stuff involved are: kernel: 2.6.32-5-xen-amd64 ii nfs-kernel-server 1:1.2.2-4squeeze2 support for NFS kernel server ii libnfsidmap2 0.23-2 An nfs idmapping library ii nfs-common 1:1.2.2-4squeeze2 NFS support files common to client and server ii portmap 6.0.0-2 RPC port mapper (The client doesn't have nfs-kernel-server involved.) I have a directory with ACLs: # file: dirname # owner: jon # group: foogroup # flags: -s- user::rwx user:www-data:rwx group::r-x group:foogroup:rwx mask::rwx other::r-x default:... There are two users, neither one of which owns the directory: uid=3001(jake) gid=3001(jake) groups=3001(jake),104(wheel),3999(foogroup) uid=3005(nic) gid=3005(nic) groups=3005(nic),3999(foogroup) The jake user can create files in the directory without issues. The nic user can't. All UIDs/GIDs are the same on the client and server. I've verified (packet sniffing) that the right uids/gids get sent via AUTH_UNIX are correct-- uid=gid=3005, auxiliary gids=3005,3999-- and that the server replies with NFS3ERR_ACCESS, which the kernel on the client maps to EACCES (Permission denied). Can anyone help me here?

  Read the article

• Configuring suExec to work with Apache and PHP via FastCGI

  - by RandomPsychology

  I have installed ISPConfig 3 on an Ubuntu VPS and configured it for Apache + PHP via FastCGI and suexec. I am able to upload PHP apps (e.g. Wordpress) and run them normally w/ suexec. However, for some reason the PHP scripts cannot write data to disk. For instance, trying to upgrade a plugin via Wordpress' web interface causes it to fail with the error "Could not create directory /path/to/wp-content/upgrade/plugin.tmp." Trying to upload media and other assets also fails via the web. I've checked owner/group on the directory structure and it looks good. The suExec log also seems to be normal and I don't see any indicative errors in the web server logs. I can also confirm that changing the owner/group on the directories does result in the expected error in suexec.log. Additionally, I have the directory permissions set to u=rw,g=r,o= and I've also tried setting g=rw. None of this results in my scripts being able to write to the directories. What am I doing wrong?

  Read the article

• Files not being copied to AFP volume when copying through the Finder

  - by cefstat

  I am trying to copy files from my Macbook's hard disk to my NAS. The latter is a ReadyNAS Duo and is mounted as an AFP volume. The files are about 5MB each and I copy them by selecting in a Finder window all the files that I need and then dropping them onto the destination directory. Almost always some of the files do not get copied to the NAS. For example, if I select 200 files and then start the copying, everything looks at the beginning normal (while the copying takes place the Finder window for the destination directory is updated to show 200 files while it was empty before), but after the copying ends the destination directory shows less than 200 files (let's say 190). If I copy again the same 200 files to the NAS, without replacing already copied files, the remaining 10 files are usually copied correctly. In a few cases, I have to repeat the process a third time. Notice that the Finder does not give any warning that some of the files have not been copied at any stage. I am wondering if this a known problem with AFP and the Finder and/or if there is something that I can do to solve this problem.

  Read the article

• Apache2 with lighttpd as proxy

  - by andrzejp

  Hi, I am using apache2 as web server. I would like to help him lighttpd as a proxy for static content. Unfortunately I can not well set up lighttpd and apache2. (OS: Debian) Important things from lighttpd.config: server.modules = ( "mod_access", "mod_alias", "mod_accesslog", "mod_proxy", "mod_status", ) server.document-root = "/www/" server.port = 82 server.bind = "localhost" $HTTP["remoteip"] =~ "127.0.0.1" { alias.url += ( "/doc/" => "/usr/share/doc/", "/images/" => "/usr/share/images/" ) $HTTP["url"] =~ "^/doc/|^/images/" { dir-listing.activate = "enable" } } I would like to use lighttpd in only one site operating as a virtual directory on apache2. Configuration of this virtual directory: ProxyRequests Off ProxyPreserveHost On ProxyPass /images http://0.0.0.0:82/ ProxyPass /imagehosting http://0.0.0.0:82/ ProxyPass /pictures http://0.0.0.0:82/ ProxyPassReverse / http://0.0.0.0:82/ ServerName MY_VALUES ServerAlias www.MY_VALUES UseCanonicalName Off DocumentRoot /www/MYAPP/forum <Directory "/www/MYAPP/forum"> DirectoryIndex index.htm index.php AllowOverride None ... As you can see (or not;)) my service is physically located at the path: / www / myapp / forum and I would like to support lighttpd dealt with folders: / www / myapp / forum / images / www / myapp / forum / imagehosting / www / myapp / forum / pictures and left the rest (PHP scripts) for apache After running lighttpd and apache2 working party, but did not show up any images of these locations. What is wrong?

  Read the article

• Windows 7 libraries and folder redirection nightmare

  - by Lobuno

  Hello! In our active directory we deploy a policy to our clients where the personal directory (My documents) is redirected to a file server of ours \server\share\username\Documents In older systems everything worked fine. in Windows 7 some users are experimenting the following symptoms: The Documents library is EMPTY Where the documents library should be shown in Explorer an empty white icon is displayed. No caption. Right clicking in the Documents library to edit the folders that are part of the libraries brings the dialog up. However, that dialog is unusable. No folder is present there and clicking Add folder does nothing. Deleting the library and auto-creating it doesn't solve the problem The shared directory can be accessed via UNC paths and it can be mounted as a shared drive as well. The library is still broken. The shared drives are on a W2008 indexed server... Using the Windows Library tool utility doesn't solve the problem. What can the cause of this problem be and how can this be solved?

  Read the article

• Windows 7 libraries and folder redirection nightmare

  - by Lobuno

  Hello! In our active directory we deploy a policy to our clients where the personal directory (My documents) is redirected to a file server of ours \server\share\username\Documents In older systems everything worked fine. in Windows 7 some users are experimenting the following symptoms: The Documents library is EMPTY Where the documents library should be shown in Explorer an empty white icon is displayed. No caption. Right clicking in the Documents library to edit the folders that are part of the libraries brings the dialog up. However, that dialog is unusable. No folder is present there and clicking Add folder does nothing. Deleting the library and auto-creating it doesn't solve the problem The shared directory can be accessed via UNC paths and it can be mounted as a shared drive as well. The library is still broken. The shared drives are on a W2008 indexed server... Using the Windows Library tool utility doesn't solve the problem. What can the cause of this problem be and how can this be solved?

  Read the article

< Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >