ftp sync - Page 223 - Developer IT

Most secure way to access my home Linux server while I am on the road? Specialized solution wanted

- by Ace Paus

I think many people may be in my situation. I travel on business with a laptop. And I need secure access to files from the office (which in my case is my home). The short version of my question: How can I make SSH/SFTP really secure when only one person needs to connect to the server from one laptop? In this situation, what special steps would make it almost impossible for anyone else to get online access to the server? A lot more details: I use Ubuntu Linux on both my laptop (KDE) and my home/office server. Connectivity is not a problem. I can tether to my phone's connection if needed. I need access to a large number of files (around 300 GB). I don't need all of them at once, but I don't know in advance which files I might need. These files contain confidential client info and personal info such as credit card numbers, so they must be secure. Given this, I don't want store all these files on Dropbox or Amazon AWS, or similar. I couldn't justify that cost anyway (Dropbox don't even publish prices for plans above 100 GB, and security is a concern). However, I am willing to spend some money on a proper solution. A VPN service, for example, might be part of the solution? Or other commercial services? I've heard about PogoPlug, but I don't know if there is a similar service that might address my security concerns? I could copy all my files to my laptop because it has the space. But then I have to sync between my home computer and my laptop and I found in the past that I'm not very good about doing this. And if my laptop is lost or stolen, my data would be on it. The laptop drive is an SSD and encryption solutions for SSD drives are not good. Therefore, it seems best to keep all my data on my Linux file server (which is safe at home). Is that a reasonable conclusion, or is anything connected to the Internet such a risk that I should just copy the data to the laptop (and maybe replace the SSD with an HDD, which reduces battery life and performance)? I view the risks of losing a laptop to be higher. I am not an obvious hacking target online. My home broadband is cable Internet, and it seems very reliable. So I want to know the best (reasonable) way to securely access my data (from my laptop) while on the road. I only need to access it from this one computer, although I may connect from either my phone's 3G/4G or via WiFi or some client's broadband, etc. So I won't know in advance which IP address I'll have. I am leaning toward a solution based on SSH and SFTP (or similar). SSH/SFTP would provided about all the functionality I anticipate needing. I would like to use SFTP and Dolphin to browse and download files. I'll use SSH and the terminal for anything else. My Linux file server is set up with OpenSSH. I think I have SSH relatively secured. I'm using Denyhosts too. But I want to go several steps further. I want to get the chances that anyone can get into my server as close to zero as possible while still allowing me to get access from the road. I'm not a sysadmin or programmer or real "superuser". I have to spend most of my time doing other things. I've heard about "port knocking" but I have never used it and I don't know how to implement it (although I'm willing to learn). I have already read a number of articles with titles such as: Top 20 OpenSSH Server Best Security Practices 20 Linux Server Hardening Security Tips Debian Linux Stop SSH User Hacking / Cracking Attacks with DenyHosts Software more... I have not implemented every single thing I've read about. I probably can't do that. But maybe there is something even better I can do in my situation because I only need access from a single laptop. I'm just one user. My server does not need to be accessible to the general public. Given all these facts, I'm hoping I can get some suggestions here that are within my capability to implement and that leverage these facts to create a great deal better security than general purpose suggestions in the articles above.

Read the article

Unable to import Maven project into IntelliJ IDEA

- by del

I'm having problems importing any Maven projects into IntelliJ IDEA. I create an empty Maven project like this: $ mvn archetype:generate -DgroupId=com.mycompany.app -DartifactId=my-app -DarchetypeArtifactId=maven-archetype-quickstart -DinteractiveMode=false Then I try to open the project in IDEA (File Open Project, then choose the pom.xml). A progress box saying "Reading pom.xml" displays for a few minutes, and then just disappears without opening the project. Looking in the IDEA log, I see some connection timeout exceptions like this: 2012-10-03 11:55:55,483 [ 16981] INFO - ution.rmi.RemoteProcessSupport - Port/ID: 18011/Maven2ServerImpl9407569f 2012-10-03 11:56:58,898 [ 80396] WARN - ution.rmi.RemoteProcessSupport - The cook failed to start due to java.net.ConnectException: Connection timed out 2012-10-03 11:57:55,483 [ 136981] WARN - ution.rmi.RemoteProcessSupport - java.rmi.NotBoundException: _DEAD_HAND_ 2012-10-03 11:57:55,484 [ 136982] WARN - ution.rmi.RemoteProcessSupport - at sun.rmi.registry.RegistryImpl.lookup(RegistryImpl.java:106) 2012-10-03 11:57:55,484 [ 136982] WARN - ution.rmi.RemoteProcessSupport - at com.intellij.execution.rmi.RemoteServer.start(RemoteServer.java:73) 2012-10-03 11:57:55,484 [ 136982] WARN - ution.rmi.RemoteProcessSupport - at org.jetbrains.idea.maven.server.RemoteMavenServer.main(RemoteMavenServer.java:22) 2012-10-03 11:58:01,749 [ 143247] ERROR - com.intellij.ide.IdeEventQueue - Error during dispatching of java.awt.event.MouseEvent[MOUSE_RELEASED,(65,116),absolute(64,140),button=1,modifiers=Button1,clickCount=1] on frame0 java.lang.RuntimeException: Cannot reconnect. at org.jetbrains.idea.maven.server.RemoteObjectWrapper.perform(RemoteObjectWrapper.java:82) at org.jetbrains.idea.maven.server.MavenServerManager.applyProfiles(MavenServerManager.java:311) at org.jetbrains.idea.maven.project.MavenProjectReader.applyProfiles(MavenProjectReader.java:369) at org.jetbrains.idea.maven.project.MavenProjectReader.doReadProjectModel(MavenProjectReader.java:98) at org.jetbrains.idea.maven.project.MavenProjectReader.readProject(MavenProjectReader.java:52) at org.jetbrains.idea.maven.project.MavenProject.read(MavenProject.java:405) at org.jetbrains.idea.maven.project.MavenProjectsTree.doUpdate(MavenProjectsTree.java:534) at org.jetbrains.idea.maven.project.MavenProjectsTree.doAdd(MavenProjectsTree.java:481) at org.jetbrains.idea.maven.project.MavenProjectsTree.update(MavenProjectsTree.java:442) at org.jetbrains.idea.maven.project.MavenProjectsTree.updateAll(MavenProjectsTree.java:413) at org.jetbrains.idea.maven.wizards.MavenProjectBuilder.readMavenProjectTree(MavenProjectBuilder.java:198) at org.jetbrains.idea.maven.wizards.MavenProjectBuilder.access$800(MavenProjectBuilder.java:44) at org.jetbrains.idea.maven.wizards.MavenProjectBuilder$3.run(MavenProjectBuilder.java:179) at org.jetbrains.idea.maven.utils.MavenUtil$8.run(MavenUtil.java:388) at com.intellij.openapi.progress.impl.ProgressManagerImpl$TaskRunnable.run(ProgressManagerImpl.java:469) at com.intellij.openapi.progress.impl.ProgressManagerImpl$6.run(ProgressManagerImpl.java:288) at com.intellij.openapi.progress.impl.ProgressManagerImpl$2.run(ProgressManagerImpl.java:178) at com.intellij.openapi.progress.impl.ProgressManagerImpl.executeProcessUnderProgress(ProgressManagerImpl.java:218) at com.intellij.openapi.progress.impl.ProgressManagerImpl.runProcess(ProgressManagerImpl.java:169) at com.intellij.openapi.application.impl.ApplicationImpl$8$1.run(ApplicationImpl.java:641) at com.intellij.openapi.application.impl.ApplicationImpl$6.run(ApplicationImpl.java:434) at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) at java.util.concurrent.FutureTask.run(FutureTask.java:138) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:662) at com.intellij.openapi.application.impl.ApplicationImpl$1$1.run(ApplicationImpl.java:145) Caused by: java.rmi.RemoteException: Cannot start maven service; nested exception is: java.rmi.ConnectException: Connection refused to host: localhost; nested exception is: java.net.ConnectException: Connection timed out at org.jetbrains.idea.maven.server.MavenServerManager.create(MavenServerManager.java:120) at org.jetbrains.idea.maven.server.MavenServerManager.create(MavenServerManager.java:71) at org.jetbrains.idea.maven.server.RemoteObjectWrapper.getOrCreateWrappee(RemoteObjectWrapper.java:41) at org.jetbrains.idea.maven.server.MavenServerManager$8.execute(MavenServerManager.java:314) at org.jetbrains.idea.maven.server.MavenServerManager$8.execute(MavenServerManager.java:311) at org.jetbrains.idea.maven.server.RemoteObjectWrapper.perform(RemoteObjectWrapper.java:76) ... 27 more Caused by: java.rmi.ConnectException: Connection refused to host: localhost; nested exception is: java.net.ConnectException: Connection timed out at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601) at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198) at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184) at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322) at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source) at com.intellij.execution.rmi.RemoteProcessSupport$2.compute(RemoteProcessSupport.java:215) at com.intellij.execution.rmi.RemoteUtil.executeWithClassLoader(RemoteUtil.java:122) at com.intellij.execution.rmi.RemoteProcessSupport.acquire(RemoteProcessSupport.java:212) at com.intellij.execution.rmi.RemoteProcessSupport.acquire(RemoteProcessSupport.java:133) at org.jetbrains.idea.maven.server.MavenServerManager.create(MavenServerManager.java:117) ... 32 more Caused by: java.net.ConnectException: Connection timed out at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:529) at java.net.Socket.connect(Socket.java:478) at java.net.Socket.(Socket.java:375) at java.net.Socket.(Socket.java:189) at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22) at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128) at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595) ... 41 more I'm using the latest versions of IDEA (11.1.3) and Maven (3.0.4). Any ideas what I am doing wrong?

Read the article

Animating the offset of the scrollView in a UICollectionView/UITableView causes prematurely disappearing cells

- by radutzan

We have a UICollectionView with a custom layout very similar to UITableView (it scrolls vertically). The UICollectionView displays only 3 cells simultaneously, with one of them being the currently active cell: [ 1 ] [*2*] [ 3 ] (The active cell here is #2.) The cells are roughly 280 points high, so only the active cell is fully visible on the screen. The user doesn't directly scroll the view to navigate, instead, she swipes the active cell horizontally to advance to the next cell. We then do some fancy animations and scroll the UICollectionView so the next cell is in the "active" position, thus making it the active one, moving the old one away and bringing up the next cell in the queue: [ 2 ] [*3*] [ 4 ] The problem here is setting the UICollectionView's offset. We currently set it in a UIView animation block (self.collectionView.contentOffset = targetOffset;) along with three other animating properties, which mostly works great, but causes the first cell (the previously active one, in the latter case, #2) to vanish as soon as the animation starts running, even before the delay interval completes. This is definitely not ideal. I've thought of some solutions, but can't figure out the best one: Absurdly enlarge the UICollectionView's frame to fit five cells instead of three, thus forcing it to keep the cells in memory even if they are offscreen. I've tried this and it works, but it sounds like an awfully dirty hack. Take a snapshot of the rendered content of the vanishing cell, put it in a UIImageView, add the UIImageView as a subview of the scrollView just before the cell goes away in the exact same position of the old cell, removing it once the animation ends. Sounds less sucky than the previous option (memory-wise, at least), but still kinda hacky. I also don't know the best way to accomplish this, please point me in the right direction. Switch to UIScrollView's setContentOffset:animated:. We actually used to have this, and it fixed the disappearing cell issue, but running this in parallel with the other UIView animations apparently competes for the attention of the main thread, thus creating a terribly choppy animation on single-core devices (iPhone 3GS/4). It also doesn't allow us to change the duration or easing of the animation, so it feels out of sync with the rest. Still an option if we can find a way to make it work in harmony with the UIView block animations. Switch to UICollectionView's scrollToItemAtIndexPath:atScrollPosition:animated:. Haven't tried this, but it has a big downside: it only takes 3 possible constants (that apply to this case, at least) for the target scroll position: UICollectionViewScrollPositionTop, UICollectionViewScrollPositionCenteredVertically and UICollectionViewScrollPositionBottom. The active cell could vary its height, but it always has to be 35 points from the top of the window, and these options don't provide enough control to accomplish the design. It could also potentially be just as problematic as 3.1. Still an option because there might be a way to go around the scroll position thing that I don't know of, and it might not have the same issue with the main thread, which seems unlikely. Any help will be greatly appreciated. Please ask if you need clarification. Thanks a lot!

Read the article

WCF app Deployed on Win7 Machine and get connection refused error

- by Belliez

I have created a Sync Framework application based on the following sample from microsoft and deployed it to a new Windows 7 machine for testing. The app runs ok but when I attempt to communicate I get the following error: Could not connect to http://localhost:8000/RelationalSyncContract/SqlSyncService/. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:8000. I am wondering if there is something I am missing. This is my first experience using WCF and followed microsoft sample code. I have disabled the firewall and opened port 8000 for both TCP and UDP. Not sure what to look at next. Below is my App.config file if this helps: <?xml version="1.0"?> <configuration> <system.web> <compilation debug="true"/> <httpRuntime maxRequestLength="32768" /> </system.web>  <system.serviceModel> <services> <service behaviorConfiguration="WebSyncContract.SyncServiceBehavior" name="WebSyncContract.SqlWebSyncService"> <endpoint address="" binding="wsHttpBinding" bindingConfiguration="largeMessageHttpBinding" contract="WebSyncContract.ISqlSyncContract"> <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> <host> <baseAddresses> <add baseAddress="http://localhost:8000/RelationalSyncContract/SqlSyncService/"/> </baseAddresses> </host> </service> </services> <bindings> <wsHttpBinding>  <binding name="largeMessageHttpBinding" maxReceivedMessageSize="204857600"> <readerQuotas maxArrayLength="1000000"/> </binding> </wsHttpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="WebSyncContract.SyncServiceBehavior">  <serviceMetadata httpGetEnabled="True"/>  <serviceDebug includeExceptionDetailInFaults="True"/> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> <startup><supportedRuntime version="v2.0.50727"/></startup></configuration> Thank you, your help is much appreciated.

Read the article

Edit and render RichText

- by OregonGhost

We have an application (a custom network management tool for building automation) that supports printing labels that you can cut out and insert into the devices' front displays. In earlier versions of the tool (not developed in my company), the application just pushed the strings into an Excel file that the field technician could then manipulate (like formatting text). We didn't do this in the new version because it was hard (impossible) to keep the Excel file in sync, and to avoid a binding to an external application (let alone different versions of Excel). We're using PDFSharp for rendering the labels. It has a System.Drawing-like interface, but can output to a System.Drawing.Graphics (screen / printer) as well as to a PDF file, which is a requirement. Later, basic formatting was introduced like Font Family, Style, Size, Color which would apply to one label (i.e. to exactly one string). Now the customer wants to be able to apply these formats to single characters in a string. I think the easiest way would be to support a subset of RichText. It's not as easy as I thought though. Currently the editor just displays a TextBox for the label you want to edit, with the font set to the label's font. I thought I'd just replace it with RichTextBox, and update the formatting buttons to use the RichTextBox formatting properties. Fairly easy. However, I need to draw the text. I know you can get the RichTextBox to draw to a HDC or System.Drawing.Graphics - but as already said, I need it to use PDFSharp. Rendering to bitmaps is not an option, since the PDF must not be huge, and it's a lot of labels. Unfortunately I couldn't get the RichTextBox to tell me the layout of the text - I'm fine with doing the actual rendering by hand, as long as I know where to draw what. This is the first question: How can I get the properly layouted metrics of the rich text out of a RichTextBox? Or is there any way to convert the rich text to a vector graphics format that can be easily drawn manually? I know about NRTFTree which can be used to parse and manipulate RichText. The documentation is bad (actually I don't know, it's Spanish), but I think I can get it to work. As far as I understood, it won't provide layouting as well. Because of this, I think I'll have to write a custom edit control (remember, it's basically just one or two line labels with basic RTF formatting, not a full-fledged edit control - more like editing a textbox in PowerPoint) and write custom text layout logic that used PDFSharp rather than System.Drawing for drawing. Is there any existing, even if partial, solution available, either for the editing or for doing the layout manually (or both)? Or is there an entirely different approach I'm just not seeing? Bonus points if exporting the label texts as RTF into a CSV file, and then importing in Excel retains the formatting. For the editing part, I need it to work in Windows Forms. Other than that it's not Windows-Forms-related, I think.

Read the article

Need Help Setting an Image with Transparent Background to Clipboard

- by AMissico

I need help setting a transparent image to the clipboard. I keep getting "handle is invalid". Basically, I need a "second set of eyes" to look over the following code. (The complete working project at ftp://missico.net/ImageVisualizer.zip.) This is an image Debug Visualizer class library, but I made the included project to run as an executable for testing. (Note that window is a toolbox window and show in taskbar is set to false.) I was tired of having to perform a screen capture on the toolbox window, open the screen capture with an image editor, and then deleting the background added because it was a screen capture. So I thought I would quickly put the transparent image onto the clipboard. Well, the problem is...no transparency support for Clipboard.SetImage. Google to the rescue...not quite. This is what I have so far. I pulled from a number of sources. See the code for the main reference. My problem is the "invalid handle" when using CF_DIBV5. Do I need to use BITMAPV5HEADER and CreateDIBitmap? Any help from you GDI/GDI+ Wizards would be greatly appreciated. public static void SetClipboardData(Bitmap bitmap, IntPtr hDC) { const uint SRCCOPY = 0x00CC0020; const int CF_DIBV5 = 17; const int CF_BITMAP = 2; //'reference //'http://social.msdn.microsoft.com/Forums/en-US/winforms/thread/816a35f6-9530-442b-9647-e856602cc0e2 IntPtr memDC = CreateCompatibleDC(hDC); IntPtr memBM = CreateCompatibleBitmap(hDC, bitmap.Width, bitmap.Height); SelectObject(memDC, memBM); using (Graphics g = Graphics.FromImage(bitmap)) { IntPtr hBitmapDC = g.GetHdc(); IntPtr hBitmap = bitmap.GetHbitmap(); SelectObject(hBitmapDC, hBitmap); BitBlt(memDC, 0, 0, bitmap.Width, bitmap.Height, hBitmapDC, 0, 0, SRCCOPY); if (!OpenClipboard(IntPtr.Zero)) { throw new System.Runtime.InteropServices.ExternalException("Could not open Clipboard", new Win32Exception()); } if (!EmptyClipboard()) { throw new System.Runtime.InteropServices.ExternalException("Unable to empty Clipboard", new Win32Exception()); } //IntPtr hClipboard = SetClipboardData(CF_BITMAP, memBM); //works but image is not transparent //all my attempts result in SetClipboardData returning hClipboard = IntPtr.Zero IntPtr hClipboard = SetClipboardData(CF_DIBV5, memBM); //because if (hClipboard == IntPtr.Zero) { // InnerException: System.ComponentModel.Win32Exception // Message="The handle is invalid" // ErrorCode=-2147467259 // NativeErrorCode=6 // InnerException: throw new System.Runtime.InteropServices.ExternalException("Could not put data on Clipboard", new Win32Exception()); } if (!CloseClipboard()) { throw new System.Runtime.InteropServices.ExternalException("Could not close Clipboard", new Win32Exception()); } g.ReleaseHdc(hBitmapDC); } } private void __copyMenuItem_Click(object sender, EventArgs e) { using (Graphics g = __pictureBox.CreateGraphics()) { IntPtr hDC = g.GetHdc(); MemoryStream ms = new MemoryStream(); __pictureBox.Image.Save(ms, ImageFormat.Png); ms.Seek(0, SeekOrigin.Begin); Image imag = Image.FromStream(ms); // Derive BitMap object using Image instance, so that you can avoid the issue //"a graphics object cannot be created from an image that has an indexed pixel format" Bitmap img = new Bitmap(new Bitmap(imag)); SetClipboardData(img, hDC); g.ReleaseHdc(); } }

Read the article

git local master branch stopped tracking remotes/origin/master, can't push

- by Paul Smith

Just when I thought I'd got the hang of the git checkout -b newbranch - commit/commit/commit - git checkout master - git merge newbranch - git rebase -i master - git push workflow in git, something blew up, and I can't see any reason for it. Here's the general workflow, which has worked for me in the past: # make sure I'm up to date on master: $ git checkout master $ git pull # k, no conflicts # start my new feature $ git checkout -b FEATURE9 # master @ 2f93e34 Switched to a new branch 'FEATURE9' ... work, commit, work, commit, work, commit... $ git commit -a $ git checkout master $ git merge FEATURE9 $ git rebase -i master # squash some of the FEATURE9 ugliness Ok so far; now what I expect to see -- and normally do see -- is this: $ git status # On branch master # Your branch is ahead of 'origin/master' by 1 commit. # nothing to commit (working directory clean) But instead, I only see "nothing to commit (working directory clean)", no "Your branch is ahead of 'origin/master' by 1 commit.", and git pull shows this weirdness: $ git pull From . # unexpected * branch master -> FETCH_HEAD # unexpected Already up-to-date. # expected And git branch -a -v shows this: $ git branch -a -v FEATURE9 3eaf059 started feature 9 * master 3eaf059 started feature 9 remotes/origin/HEAD -> origin/master remotes/origin/master 2f93e34 some boring previous commit # should=3eaf059 git branch clearly shows that I'm currently on * master, and git log clearly shows that master (local) is at 3eaf059, while remotes/origin/HEAD - remotes/origin/master is stuck back at the fork. Ideally I'd like to know the semantics of how I might have gotten into this, but I would settle for a way to get my working copy tracking the remote master again & get the two back in sync without losing history. Thanks! (Note: I re-cloned the repo in a new directory and manually re-applied the changes, and everything worked fine, but I don't want that to be the standard workaround.) Addendum: The title says "can't push", but there's no error message. I just get the "already up to date" response even though git branch -a -v shows that local master is ahead of /remotes/origin/master. Here's the output from git pull and git remote -v, respectively: $ git pull From . * branch master -> FETCH_HEAD Already up-to-date. $ git remote -v origin [email protected]:proj.git (fetch) origin [email protected]:proj.git (push) Addendum 2: It looks as if my local master is configured to push to the remote, but not to pull from it. After doing for remote in 'git branch -r | grep -v master '; do git checkout --track $remote ; done, here's what I have. It seems I just need to get master pulling from remotes/origin/master again, no? $ git remote show origin * remote origin Fetch URL: [email protected]:proj.git Push URL: [email protected]:proj.git HEAD branch: master Remote branches: experiment_f tracked master tracked Local branches configured for 'git pull': experiment_f merges with remote experiment_f Local refs configured for 'git push': experiment_f pushes to experiment_f (up to date) master pushes to master (local out of date)

Read the article

Mac 10.6 Universal Binary scipy: cephes/specfun "_aswfa_" symbol not found

- by Markus

Hi folks, I can't get scipy to function in 32 bit mode when compiled as a i386/x86_64 universal binary, and executed on my 64 bit 10.6.2 MacPro1,1. My python setup With the help of this answer, I built a 32/64 bit intel universal binary of python 2.6.4 with the intention of using the arch command to select between the architectures. (I managed to make some universal binaries of a few libraries I wanted using lipo.) That all works. I then installed scipy according to the instructions on hyperjeff's article, only with more up-to-date numpy (1.4.0) and skipping the bit about moving numpy aside briefly during the installation of scipy. Now, everything except scipy seems to be working as far as I can tell, and I can indeed select between 32 and 64 bit mode using arch -i386 python and arch -x86_64 python. The error Scipy complains in 32 bit mode: $ arch -x86_64 python -c "import scipy.interpolate; print 'success'" success $ arch -i386 python -c "import scipy.interpolate; print 'success'" Traceback (most recent call last): File "<string>", line 1, in <module> File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/interpolate/__init__.py", line 7, in <module> from interpolate import * File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/interpolate/interpolate.py", line 13, in <module> import scipy.special as spec File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/__init__.py", line 8, in <module> from basic import * File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/basic.py", line 8, in <module> from _cephes import * ImportError: dlopen(/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/_cephes.so, 2): Symbol not found: _aswfa_ Referenced from: /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/_cephes.so Expected in: flat namespace in /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/_cephes.so Attempt at tracking down the problem It looks like scipy.interpolate imports something called _cephes, which looks for a symbol called _aswfa_ but can't find it in 32 bit mode. Browsing through scipy's source, I find an ASWFA subroutine in specfun.f. The only scipy product file with a similar name is specfun.so, but both that and _cephes.so appear to be universal binaries: $ cd /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/ $ file _cephes.so specfun.so _cephes.so: Mach-O universal binary with 2 architectures _cephes.so (for architecture i386): Mach-O bundle i386 _cephes.so (for architecture x86_64): Mach-O 64-bit bundle x86_64 specfun.so: Mach-O universal binary with 2 architectures specfun.so (for architecture i386): Mach-O bundle i386 specfun.so (for architecture x86_64): Mach-O 64-bit bundle x86_64 Ho hum. I'm stuck. Things I may try but haven't figured out how yet include compiling specfun.so myself manually, somehow. I would imagine that scipy isn't broken for all 32 bit machines, so I guess something is wrong with the way I've installed it, but I can't figure out what. I don't really expect a full answer given my fairly unique (?) setup, but if anyone has any clues that might point me in the right direction, they'd be greatly appreciated. (edit) More details to address questions: I'm using gfortran (GNU Fortran from GCC 4.2.1 Apple Inc. build 5646). Python 2.6.4 was installed more-or-less like so: cd /tmp curl -O http://www.python.org/ftp/python/2.6.4/Python-2.6.4.tar.bz2 tar xf Python-2.6.4.tar.bz2 cd Python-2.6.4 # Now replace buggy pythonw.c file with one that supports the "arch" command: curl http://bugs.python.org/file14949/pythonw.c | sed s/2.7/2.6/ > Mac/Tools/pythonw.c ./configure --enable-framework=/Library/Frameworks --enable-universalsdk=/ --with-universal-archs=intel make -j4 sudo make frameworkinstall Scipy 0.7.1 was installed pretty much as described as here, but it boils down to a simple sudo python setup.py install. It would indeed appear that the symbol is undefined in the i386 architecture if you look at the _cephes library with nm, as suggested by David Cournapeau: $ nm -arch x86_64 /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/_cephes.so | grep _aswfa_ 00000000000d4950 T _aswfa_ 000000000011e4b0 d _oblate_aswfa_data 000000000011e510 d _oblate_aswfa_nocv_data (snip) $ nm -arch i386 /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/_cephes.so | grep _aswfa_ U _aswfa_ 0002e96c d _oblate_aswfa_data 0002e99c d _oblate_aswfa_nocv_data (snip) however, I can't yet explain its absence.

Read the article

How to fix notifyDataSetChanged/ListView problems in dynamic Adapter wrapper Android

- by ipaterson

Summary: Trying to dynamically add heading rows to a ListView via a custom adapter wrapper. ListView is having trouble keeping the scroll position in sync. Runnable demo project provided. I would like to dynamically add items to a list based on the values in a CursorAdapter, several positions ahead of what the user is currently viewing. To do this, I have an adapter that wraps the CursorAdapter and keeps the new content indexed in a SparseArray. The ListView needs to be updated when items are added to the custom adapter, but I have met a lot of pitfalls trying to get that to work and would love some advice. The demo project can be downloaded here: http://dl.dropbox.com/u/15334423/DynamicSectionedList.zip In the demo, the headings are added dynamically by looking ahead 10 places to find the correct position where the list items switch to the next letter. Each implementation of notifyDataSetChanged has problems as described: Demo 1 This demo shows the importance of notifyDataSetChanged(). On clicking anything, the app will crash. This is due to some sanity checking in ListView... mItemCount != adapter.getItemCount(). Moral is, we need to notify the list that data has changed. Demo 2 The natural next step is to notify the ListView of changes when changes occur. Unfortunately, doing so while the ListView is scrolling firmly breaks all touch interaction until the app switches out of touch mode. You will need to "fling scroll" far enough to generate new headings in order to notice this. Tapping the screen will not cause the scroll to stop, and once stopped none of the list items will be clickable. This is due to some if (!mDataChanged) { /* do very important stuff */ } code in AbsListView.onTouchEvent(). Demo 3 To fix this, Demo 3 introduces a pendingChanges flag and the custom Adapter gains a notifyDataSetChangedIfNeeded() which can be called by the ListView once it has entered a "safe" state for changes. The first point where changes must be notified is in ListView.layoutChildren(), so I overrode that method to first notify of changes if needed, then call through. Fling past at least one heading then click a list item. This doesn't quite work right, though I'm not totally sure why. Tapping or selecting an item with the keyboard/trackball causes the list to refresh without properly syncing the old position. It scrolls to the top of the list which is not acceptable. Demo 4 The scroll problem in Demo 3 can be conquered, at least in touch mode. By adding a call to notifyDataSetChangedIfNeeded() on touch down, the data change happens to take place at such a time that all touch interaction works as expected and the list position is properly synced. However, I can't find an analog for that when the device is not in touch mode, not to mention the fact that it definitely seems like a hack. The list almost always scrolls back to the top, I can't find out what causes it to occasionally maintain the correct position. Since Android is fighting me at each step of the way, I feel like there should be a better approach. Please try the demo, if any fixes can be applied to get it working that would be great! Many thanks to anyone who can look into this, hopefully if we can get the code working it will be useful for others trying to accomplish the same optimization for lists with headings.

Read the article

zend tool is not working

- by user362155

Hi, I've installed ZendStudio 7.2 it creates project normally with no error but when i try to add action(s) in it, it says project profile does not exist. and the error log is as follow: executing zf create action showLatest index-action-included An Error Has Occurred A project profile was not found. Zend Framework Command Line Console Tool v1.10.2 Details for action "Create" and provider "Action" Action zf create action name controller-name[=Index] view-included[=1] module Failed loading ./ZendDebugger.so: (null) PHP Warning: PHP Startup: Unable to load dynamic library './ext/bcmath.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/bz2.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/calendar.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/ctype.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/curl.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/exif.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/fileinfo.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/ftp.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/gd.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/imagick.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/json.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/ldap.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/mbstring.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/mcrypt.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/memcache.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/mhash.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/mime_magic.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/mssql.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/mysql.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/mysqli.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/pcntl.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/pgsql.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/posix.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/shmop.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/soap.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/sockets.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/sqlite.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/sysvmsg.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/sysvsem.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/sysvshm.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/tidy.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/tokenizer.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/wddx.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/xmlreader.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/xmlrpc.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/xsl.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/zip.so' - (null) in Unknown on line 0 please help me to configure latest ZendTool with ZendStudio 7.2 or how can i get rid of this. i am runin ZS 7.2 on my mac os x 10.5.8 thanks.

Read the article

ASMX Web Services with SOAP Extension

- by digitall

I am in the process of setting up a web service for an external client to connect to my client's application and update some information. I went the ASMX route (the rest of the application runs on WCF) because I knew the external client could be very difficult to deal with and I was trying to keep everything as simple as possible. They also aren't a .Net shop which makes things worse. After getting the service setup for them I provided the ASMX URL for them to see how to format the SOAP headers/message content. They have since come back and told me their tool is unable to send them in the format required by .Net and I can either come up with a different way to accept messages or we have to go with FTP. Based on this I have been researching how to intercept their message, reformat it the way my service requires it (which means adding two lines), and then let it process. This path led me to SOAP Extensions which I have been trying to work with but can't seem to figure out. When I have my sample application call the web service from the generated code Add Web Reference provides everything works great until I add in my extension. All it currently does is override ChainStream setting an internal stream equal to the one being passed in and returning a new stream, like this: private Stream newStream = null; private Stream oldStream = null; public override Stream ChainStream(Stream stream) { this.oldStream = stream; this.newStream = new MemoryStream(); return newStream; } I also override ProcessMessage and in it take the contents of oldStream and set newStream equal to that and then write to a different stream with an XmlWriter. I take that new stream and using a StreamReader read it into a string, with the end goal being manipulating it here and setting newStream (which is being used by ChainStream) equal to the contents of this. Here is that piece: public override void ProcessMessage(SoapMessage message) { switch (message.Stage) { case SoapMessageStage.BeforeDeserialize: this.Process(); break; default: break; } } private void Process() { this.newStream.Position = 0L; XmlTextReader reader = new XmlTextReader(this.oldStream); MemoryStream outStream = new MemoryStream(); using (XmlWriter writer = XmlWriter.Create(outStream)) { do { writer.WriteNode(reader, true); } while (reader.Read()); writer.Flush(); } outStream.Seek(0, SeekOrigin.Begin); StreamReader streamReader = new StreamReader(outStream); string message = streamReader.ReadToEnd(); newStream = outStream; newStream.Seek(0, SeekOrigin.Begin); streamReader.Close(); } By running this, which seems to me like it would be fine, my test application gets a 400 Bad Request back from the service. If I either don't use the extension or I don't do anything in ProcessMessage everything seems fine. Any suggestions to this? As a side note, once I get this working with the generated code from the WSDL I will be moving to a WebRequest to try sending the message to the service. Currently that bombs out with a 415 Unsupported Media Type response. I'm trying to keep this post to one question but if anyone has any tips with using a WebRequest to connect to an ASMX service it would be much appreciated!

Read the article

Joystick input in Java

- by typoknig

Hi all, I am making a 2D game in Java and I want to use a joystick to control the movement of some crosshairs. Right now I have it so the mouse can control those crosshairs. My only criteria for this is that the control for the crosshair must stay in the game window unless a user clicks off into another window. Basically I want my game to capture whatever device is controlling the crosshairs much like a virtual machine captures a mouse. The joystick I am using (Thrustmaster Hotas Cougar) comes with some pretty advanced features, so that may make this easier (or harder). I have tried the solution listed on this page, but I am using a 64bit computer and for some reason it does not like that. I have also tried to use the key emulation feature of my joystick, but with little success. Here is what I have so far, any pointer would be appreciated. Main Class: import java.awt.Color; import java.awt.Cursor; import java.awt.event.MouseEvent; import java.awt.event.MouseMotionListener; import java.awt.Graphics; import java.awt.Image; import java.awt.image.BufferStrategy; import java.awt.image.MemoryImageSource; import java.awt.Point; import java.awt.Toolkit; import javax.swing.JFrame; public class Game extends JFrame implements MouseMotionListener{ private int windowWidth = 1280; private int windowHeight = 1024; private Crosshair crosshair; public static void main(String[] args) { new Game(); } public Game() { this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); this.setSize(windowWidth, windowHeight); this.setResizable(false); this.setLocation(0,0); this.setVisible(true); this.createBufferStrategy(2); addMouseMotionListener(this); initGame(); while(true) { long start = System.currentTimeMillis(); gameLoop(); while(System.currentTimeMillis()-start < 5) { //empty while loop } } } private void initGame() { hideCursor(); crosshair = new Crosshair (windowWidth/2, windowHeight/2); } private void gameLoop() { //game logic drawFrame(); } private void drawFrame() { BufferStrategy bf = this.getBufferStrategy(); Graphics g = (Graphics)bf.getDrawGraphics(); try { g = bf.getDrawGraphics(); Color darkBlue = new Color(0x010040); g.setColor(darkBlue); g.fillRect(0, 0, windowWidth, windowHeight); drawCrossHair(g); } finally { g.dispose(); } bf.show(); Toolkit.getDefaultToolkit().sync(); } private void drawCrossHair(Graphics g){ Color yellow = new Color (0xEDFF62); g.setColor(yellow); g.drawOval(crosshair.x, crosshair.y, 40, 40); g.fillArc(crosshair.x + 10, crosshair.y + 21 , 20, 20, -45, -90); g.fillArc(crosshair.x - 1, crosshair.y + 10, 20, 20, -135, -90); g.fillArc(crosshair.x + 10, crosshair.y - 1, 20, 20, -225, -90); g.fillArc(crosshair.x + 21, crosshair.y + 10, 20, 20, -315, -90); } @Override public void mouseDragged(MouseEvent e) { //empty method } @Override public void mouseMoved(MouseEvent e) { crosshair.x = e.getX(); crosshair.y = e.getY(); } private void hideCursor() { int[] pixels = new int[16 * 16]; Image image = Toolkit.getDefaultToolkit().createImage(new MemoryImageSource(16, 16, pixels, 0, 16)); Cursor transparentCursor = Toolkit.getDefaultToolkit().createCustomCursor(image, new Point(0, 0), "invisiblecursor"); getContentPane().setCursor(transparentCursor); } } Another Class: public class Crosshair{ public int x; public int y; public Crosshair(int x, int y) { this.x = x; this.y = y; } }

Read the article

Ivy resolve not working with dynamic artifact

- by richever

I've been using Ivy a bit but I seem to still have a lot to learn. I have two projects. One is a web app and the other is a library upon which the web app depends. The set up is that the library project is compiled to a jar file and published using Ivy to a directory within the project. In the web app build file, I have an ant target that calls the Ivy resolve ant task. What I'd like to do is have the web app using the dynamic resolve mode during development (on developer's local machines) and default resolve mode for test and production builds. Previously I was appending a time stamp to the library archive file so that Ivy would notice changes in file when the web app tried to resolve its dependency on it. Within Eclipse this is cumbersome because, in the web app, the project had to be refreshed and the build path tweaked every time a new library jar was published. Publishing a similarly named jar file every time would, I figure, only require developers to refresh the project. The problem is that the web app is unable to retrieve the dynamic jar file. The output I get looks something like this: resolve: [ivy:configure] :: Ivy 2.1.0 - 20090925235825 :: http://ant.apache.org/ivy/ :: [ivy:configure] :: loading settings :: file = /Users/richard/workspace/webapp/web/WEB-INF/config/ivy/ivysettings.xml [ivy:resolve] :: resolving dependencies :: com.webapp#webapp;[email protected] [ivy:resolve] confs: [default] [ivy:resolve] found com.webapp#library;latest.integration in local [ivy:resolve] :: resolution report :: resolve 142ms :: artifacts dl 0ms --------------------------------------------------------------------- | | modules || artifacts | | conf | number| search|dwnlded|evicted|| number|dwnlded| --------------------------------------------------------------------- | default | 1 | 0 | 0 | 0 || 0 | 0 | --------------------------------------------------------------------- [ivy:resolve] [ivy:resolve] :: problems summary :: [ivy:resolve] :::: WARNINGS [ivy:resolve] :::::::::::::::::::::::::::::::::::::::::::::: [ivy:resolve] :: UNRESOLVED DEPENDENCIES :: [ivy:resolve] :::::::::::::::::::::::::::::::::::::::::::::: [ivy:resolve] :: com.webapp#library;latest.integration: impossible to resolve dynamic revision [ivy:resolve] :::::::::::::::::::::::::::::::::::::::::::::: [ivy:resolve] :::: ERRORS [ivy:resolve] impossible to resolve dynamic revision for com.webapp#library;latest.integration: check your configuration and make sure revision is part of your pattern [ivy:resolve] [ivy:resolve] :: USE VERBOSE OR DEBUG MESSAGE LEVEL FOR MORE DETAILS BUILD FAILED /Users/richard/workspace/webapp/build.xml:71: impossible to resolve dependencies: resolve failed - see output for details The web app resolve target looks like this: <target name="resolve" depends="load-ivy"> <ivy:configure file="${ivy.dir}/ivysettings.xml" /> <ivy:resolve file="${ivy.dir}/ivy.xml" resolveMode="${ivy.resolve.mode}"/> <ivy:retrieve pattern="${lib.dir}/[artifact]-[revision].[ext]" type="jar" sync="true" /> </target> In this case, ivy.resolve.mode has a value of 'dynamic' (without quotes). The web app's Ivy file is simple. It looks like this: <ivy-module version="2.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://ant.apache.org/ivy/schemas/ivy.xsd"> <info organisation="com.webapp" module="webapp"/> <dependencies> <dependency name="library" rev="${ivy.revision.default}" revConstraint="${ivy.revision.dynamic}" /> </dependencies> </ivy-module> During development, ivy.revision.dynamic has a value of 'latest.integration'. While, during production or test, 'ivy.revision.default' has a value of '1.0'. Any ideas? Please let me know if there's any more information I need to supply. Thanks!

Read the article

PHP curl post to login to wordpress

- by Sadi

I followed http://stackoverflow.com/questions/724107 to login to wordpress, using php_curl, and it works fine as far I use WAMP, (apache/php). But when it comes to IIS on the dedicated server, it returns nothing. I have wrote the following function which is working fine on my local wamp, but when deployed to client's dedicated windows server 2k3, it doesn't. Please help me function post_url($url, array $query_string) { //$url = http://myhost.com/wptc/sys/wp/wp-login.php /* $query_string = array( 'log'=>'admin', 'pwd'=>'test', 'redirect_to'=>'http://google.com', 'wp-submit'=>'Log%20In', 'testcookie'=>1 ); */ //temp_dir is defined as folder = path/to/a/folder $cookie= temp_dir."cookie.txt"; $c = curl_init($url); if (count($query_string)) { curl_setopt ($c, CURLOPT_POSTFIELDS, http_build_query( $query_string ) ); } curl_setopt($c, CURLOPT_POST, 1); curl_setopt($c, CURLOPT_COOKIEFILE, $cookie); //curl_setopt($c, CURLOPT_SSL_VERIFYPEER, 1); //curl_setopt($c, CURLOPT_USERAGENT, "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.6) Gecko/20070725 Firefox/2.0.0.6"); curl_setopt($c, CURLOPT_TIMEOUT, 60); curl_setopt($c, CURLOPT_FOLLOWLOCATION, 1); curl_setopt($c, CURLOPT_RETURNTRANSFER, 1); //return the content curl_setopt($c, CURLOPT_COOKIEJAR, $cookie); //curl_setopt($c, CURLOPT_AUTOREFERER, 1); //curl_setopt($c, CURLOPT_REFERER, wp_admin_url); //curl_setopt($c, CURLOPT_MAXREDIRS, 10); curl_setopt($c, CURLOPT_HEADER, 0); //curl_setopt($c, CURLOPT_CRLF, 1); try { $result = curl_exec($c); } catch (Exception $e) { $result = 'error'; } curl_close ($c); return $result; //it return nothing (empty) } Other Facts curl_error($c); return nothing when header CURLOPT_HEADER is set to ON, it return this header HTTP/1.1 200 OK Cache-Control: no-cache, must-revalidate, max-age=0 Pragma: no-cache Content-Type: text/html; charset=UTF-8 Expires: Wed, 11 Jan 1984 05:00:00 GMT Last-Modified: Thu, 06 May 2010 21:06:30 GMT Server: Microsoft-IIS/7.0 X-Powered-By: PHP/5.2.13 Set-Cookie: wordpress_test_cookie=WP+Cookie+check; path=/wptc/sys/wp/ Set-Cookie: wordpress_b13661ceb5c3eba8b42d383be885d372=admin%7C1273352790%7C7d8ddfb6b1c0875c37c1805ab98f1e7b; path=/wptc/sys/wp/wp-content/plugins; httponly Set-Cookie: wordpress_b13661ceb5c3eba8b42d383be885d372=admin%7C1273352790%7C7d8ddfb6b1c0875c37c1805ab98f1e7b; path=/wptc/sys/wp/wp-admin; httponly Set-Cookie: wordpress_logged_in_b13661ceb5c3eba8b42d383be885d372=admin%7C1273352790%7Cb90825fb4a7d5da9b5dc4d99b4e06049; path=/wptc/sys/wp/; httponly Refresh: 0;url=http://myhost.com/wptc/sys/wp/wp-admin/ X-Powered-By: ASP.NET Date: Thu, 06 May 2010 21:06:30 GMT Content-Length: 0 CURL version info: Array ( [version_number] = 463872 [age] = 3 [features] = 2717 [ssl_version_number] = 0 [version] = 7.20.0 [host] = i386-pc-win32 [ssl_version] = OpenSSL/0.9.8k [libz_version] = 1.2.3 [protocols] = Array ( [0] = dict [1] = file [2] = ftp [3] = ftps [4] = http [5] = https [6] = imap [7] = imaps [8] = ldap [9] = pop3 [10] = pop3s [11] = rtsp [12] = smtp [13] = smtps [14] = telnet [15] = tftp ) ) PHP Version 5.2.13 Windows Server 2K3 IIS 7 Working fine on Apache, PHP 3.0 on my localhost (windows)

Read the article

ListView: convertView / holder getting confused

- by Steve H

I'm working with a ListView, trying to get the convertView / referenceHolder optimisation to work properly but it's giving me trouble. (This is the system where you store the R.id.xxx pointers in as a tag for each View to avoid having to call findViewById). I have a ListView populated with simple rows of an ImageView and some text, but the ImageView can be formatted either for portrait-sized images (tall and narrow) or landscape-sized images (short and wide). It's adjusting this formatting for each row which isn't working as I had hoped. The basic system is that to begin with, it inflates the layout for each row and sets the ImageView's settings based on the data, and includes an int denoting the orientation in the tag containing the R.id.xxx values. Then when it starts reusing convertViews, it checks this saved orientation against the orientation of the new row. The theory then is that if the orientation is the same, then the ImageView should already be set up correctly. If it isn't, then it sets the parameters for the ImageView as appropriate and updates the tag. However, I found that it was somehow getting confused; sometimes the tag would get out of sync with the orientation of the ImageView. For example, the tag would still say portrait, but the actual ImageView would still be in landscape layout. I couldn't find a pattern to how or when this happened; it wasn't consistent by orientation, position in the list or speed of scrolling. I can solve the problem by simply removing the check about convertView's orientation and simply always set the ImageView's parameters, but that seems to defeat the purpose of this optimisation. Can anyone see what I've done wrong in the code below? static LinearLayout.LayoutParams layoutParams; (...) public View getView(int position, View convertView, ViewGroup parent){ ReferenceHolder holder; if (convertView == null){ convertView = inflater.inflate(R.layout.pick_image_row, null); holder = new ReferenceHolder(); holder.getIdsAndSetTag(convertView, position); if (data[position][ORIENTATION] == LANDSCAPE) { // Layout defaults to portrait settings, so ImageView size needs adjusting. // layoutParams is modified here, with specific values for width, height, margins etc holder.image.setLayoutParams(layoutParams); } holder.orientation = data[position][ORIENTATION]; } else { holder = (ReferenceHolder) convertView.getTag(); if (holder.orientation != data[position][ORIENTATION]){ //This is the key if statement for my question switch (image[position][ORIENTATION]) { case PORTRAIT: // layoutParams is reset to the Portrait settings holder.orientation = data[position][ORIENTATION]; break; case LANDSCAPE: // layoutParams is reset to the Landscape settings holder.orientation = data[position][ORIENTATION]; break; } holder.image.setLayoutParams(layoutParams); } } // and the row's image and text is set here, using holder.image.xxx // and holder.text.xxx return convertView; } static class ReferenceHolder { ImageView image; TextView text; int orientation; void getIdsAndSetTag(View v, int position){ image = (ImageView) v.findViewById(R.id.pickImageImage); text = (TextView) v.findViewById(R.id.pickImageText); orientation = data[position][ORIENTATION]; v.setTag(this); } } Thanks!

Read the article

Problem with URL encoded parameters in URL view helper

- by Richard Knop

So my problem is kinda weird, it only occurs when I test the application offline (on my PC with WampServer), the same code works 100% correctly online. Here is how I use the helper (just example): <a href="<?php echo $this->url(array('module' => 'admin', 'controller' => 'index', 'action' => 'approve-photo', 'id' => $this->escape($a->id), 'ret' => urlencode('admin/index/photos')), null, true); ?>" class="blue">approve</a> Online, this link works great, it goes to the action which looks similar to this: public function approvePhotoAction() { $request = $this->getRequest(); $photos = $this->_getTable('Photos'); $dbTrans = false; try { $db = $this->_getDb(); $dbTrans = $db->beginTransaction(); $photos->edit($request->getParam('id'), array('status' => 'approved')); $db->commit(); } catch (Exception $e) { if (true === $dbTrans) { $db->rollBack(); } } $this->_redirect(urldecode($request->getParam('ret'))); } So online, it approves the photo and redirects back to the URL that is encoded as "ret" param in the URL ("admin/index/photos"). But offline with WampServer I click on the link and get 404 error like this: Not Found The requested URL /public/admin/index/approve-photo/id/1/ret/admin/index/photos was not found on this server. What the hell? I'm using the latest version of WampServer (WampServer 2.0i [11/07/09]). Everything else works. Here is my .htaccess file, just in case: RewriteEngine On RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ /index.php [NC,L] # Turn off magic quotes #php_flag magic_quotes_gpc off I'm using virtual hosts to test ZF projects on my local PC. Here is how I add virtual hosts. httpd.conf: NameVirtualHost *:80 <VirtualHost *:80> ServerName myproject DocumentRoot "C:\wamp\www\myproject" </VirtualHost> the hosts file: 127.0.0.1 myproject Any help would be appreciated because this makes testing and debugging projects on my localhost a nightmare and almost impossible task. I have to upload everything online to check if it works :( UPDATE: Source code of the _redirect helper (built in ZF helper): /** * Set redirect in response object * * @return void */ protected function _redirect($url) { if ($this->getUseAbsoluteUri() && !preg_match('#^(https?|ftp)://#', $url)) { $host = (isset($_SERVER['HTTP_HOST'])?$_SERVER['HTTP_HOST']:''); $proto = (isset($_SERVER['HTTPS'])&&$_SERVER['HTTPS']!=="off") ? 'https' : 'http'; $port = (isset($_SERVER['SERVER_PORT'])?$_SERVER['SERVER_PORT']:80); $uri = $proto . '://' . $host; if ((('http' == $proto) && (80 != $port)) || (('https' == $proto) && (443 != $port))) { $uri .= ':' . $port; } $url = $uri . '/' . ltrim($url, '/'); } $this->_redirectUrl = $url; $this->getResponse()->setRedirect($url, $this->getCode()); } UPDATE 2: Output of the helper offline: /admin/index/approve-photo/id/1/ret/admin%252Findex%252Fphotos And online (the same): /admin/index/approve-photo/id/1/ret/admin%252Findex%252Fphotos UPDATE 3: OK. The problem was actually with the virtual host configuration. The document root was set to C:\wamp\www\myproject instead of C:\wamp\www\myproject\public. And I was using this htaccess to redirect to the public folder: RewriteEngine On php_value upload_max_filesize 15M php_value post_max_size 15M php_value max_execution_time 200 php_value max_input_time 200 # Exclude some directories from URI rewriting #RewriteRule ^(dir1|dir2|dir3) - [L] RewriteRule ^\.htaccess$ - [F] RewriteCond %{REQUEST_URI} ="" RewriteRule ^.*$ /public/index.php [NC,L] RewriteCond %{REQUEST_URI} !^/public/.*$ RewriteRule ^(.*)$ /public/$1 RewriteCond %{REQUEST_FILENAME} -f RewriteRule ^.*$ - [NC,L] RewriteRule ^public/.*$ /public/index.php [NC,L] Damn it I don't know why I forgot about this, I thought the virtual host was configured correctly to the public folder, I was 100% sure about that, I also double checked it and saw no problem (wtf? am I blind?).

Read the article

jQuery AJAX (google PageRank)

- by RobertPitt

Hey guys, I need a little help.. iv'e been developing a Jqery plug-in to get the page ranks of urls on a website using XHR, The problem is when requesting the rank from google servers the page is returned no content, but if i use an inspector and get the url that was requests and go to it via my browser the pageranks are shown. so it must be something with headers but its just got me puzzled. Heres some source code but i have removed several aspects that are not needed to review. pagerank.plugin.js ( $.fn.PageRank = function(callback) { var _library = new Object(); //Creat the system library _library.parseUrl = function(a) { var b = {}; var a = a || ''; /* * parse the url to extract its parts */ if (a = a.match(/((s?ftp|https?):\/\/){1}([^\/:]+)?(:([0-9]+))?([^\?#]+)?(\?([^#]+))?(#(.+))?/)) { b.scheme = a[2] ? a[2] : "http"; b.host = a[3] ? a[3] : null; b.port = a[5] ? a[5] : null; b.path = a[6] ? a[6] : null; b.args = a[8] ? a[8] : null; b.anchor = a[10] ? a[10] : null } return b } _library.ValidUrl = function(url) { var b = true; return b = url.host === undefined ? false : url.scheme != "http" && url.scheme != "https" ? false : url.host == "localhost" ? false : true } _library.toHex = function(a){ return (a < 16 ? "0" : "") + a.toString(16) } _library.hexEncodeU32 = function(a) { } _library.generateHash = function(a) { for (var b = 16909125, c = 0; c < a.length; c++) { } return _library.hexEncodeU32(b) } var CheckPageRank = function(domain,_call) { var hash = _library.generateHash(domain); $.ajax( { url: 'http://www.google.com/search?client=navclient-auto&ch=8'+hash+'&features=Rank&q=info:' + escape(domain), async: true, dataType: 'html', ifModified:true, contentType:'', type:'GET', beforeSend:function(xhr) { xhr.setRequestHeader('Referer','http://google.com/'); //Set Referer }, success: function(content,textS,xhr){ var d = xhr.responseText.substr(9, 2).replace(/\s$/, ""); if (d == "" || isNaN(d * 1)) d = "0"; _call(d); } }); } //Return the callback $(this).each(function(){ urlsegments = _library.parseUrl($(this).attr('href')) if(_library.ValidUrl(urlsegments)) { CheckPageRank(urlsegments.host,function(rank){ alert(rank) callback(rank); }); } }); return this; //Dont break any chain. } )(jQuery); Index.html (example) <html> <head> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.1/jquery.min.js"></script> <script type="text/javascript" src="pagerank.plugin.js"></script> <script type="text/javascript"> $(document).ready(function() { $('a').PageRank(function(pr){ alert(pr); }) }); </script> </head> <body> <a href="http://facebook.com">a</a> <a href="http://twitter.com">a</a> <div></div> </body> </html> i just cant understand why its doing this.

Read the article

Need Help Setting Transparent Image to Clipboard

- by AMissico

I need help setting a transparent image to the clipboard. I keep getting "handle is invalid". Following is the specific code with the complete working project at ftp://missico.net/ImageVisualizer.zip. This is an image Debug Visualizer class library, but I made to run as executable for testing. (Note that window is a toolbox window and show in taskbar is set to false.) I was tired of having to perform a screen capture on the toolbox window, open with an image editor, and then deleting the background added due to the screen capture. So I thought I would quickly put the transparent image onto the clipboard. Well, the problem is...no transparency support for Clipboard.SetImage. Google to the rescue...not quite. This is what I have so far pulled from a number of sources. See the code for the main reference. My problem is the "invalid handle" when using CF_DIBV5. I imagine the problem is related to BITMAPV5HEADER and CreateDIBitmap. Any help from you GDI/GDI+ Wizards would be greatly appreciated. public static void SetClipboardData(Bitmap bitmap, IntPtr hDC) { const uint SRCCOPY = 0x00CC0020; const int CF_DIBV5 = 17; const int CF_BITMAP = 2; //'reference //'http://social.msdn.microsoft.com/Forums/en-US/winforms/thread/816a35f6-9530-442b-9647-e856602cc0e2 IntPtr memDC = CreateCompatibleDC(hDC); IntPtr memBM = CreateCompatibleBitmap(hDC, bitmap.Width, bitmap.Height); SelectObject(memDC, memBM); using (Graphics g = Graphics.FromImage(bitmap)) { IntPtr hBitmapDC = g.GetHdc(); IntPtr hBitmap = bitmap.GetHbitmap(); SelectObject(hBitmapDC, hBitmap); BitBlt(memDC, 0, 0, bitmap.Width, bitmap.Height, hBitmapDC, 0, 0, SRCCOPY); if (!OpenClipboard(IntPtr.Zero)) { throw new System.Runtime.InteropServices.ExternalException("Could not open Clipboard", new Win32Exception()); } if (!EmptyClipboard()) { throw new System.Runtime.InteropServices.ExternalException("Unable to empty Clipboard", new Win32Exception()); } //IntPtr hClipboard = SetClipboardData(CF_BITMAP, memBM); //works but image is not transparent //all my attempts result in SetClipboardData returning hClipboard = IntPtr.Zero IntPtr hClipboard = SetClipboardData(CF_DIBV5, memBM); //because if (hClipboard == IntPtr.Zero) { // InnerException: System.ComponentModel.Win32Exception // Message="The handle is invalid" // ErrorCode=-2147467259 // NativeErrorCode=6 // InnerException: throw new System.Runtime.InteropServices.ExternalException("Could not put data on Clipboard", new Win32Exception()); } if (!CloseClipboard()) { throw new System.Runtime.InteropServices.ExternalException("Could not close Clipboard", new Win32Exception()); } g.ReleaseHdc(hBitmapDC); } } private void __copyMenuItem_Click(object sender, EventArgs e) { //'Applications that I have verified can paste the clipboard custom data format PNG are: //' Word 2003 //' Excel 2003 using (Graphics g = __pictureBox.CreateGraphics()) { IntPtr hDC = g.GetHdc(); MemoryStream ms = new MemoryStream(); __pictureBox.Image.Save(ms, ImageFormat.Png); ms.Seek(0, SeekOrigin.Begin); Image imag = Image.FromStream(ms); // Derive BitMap object using Image instance, so that you can avoid the issue //"a graphics object cannot be created from an image that has an indexed pixel format" Bitmap img = new Bitmap(new Bitmap(imag)); SetClipboardData(img, hDC); g.ReleaseHdc(); } }

Read the article

DoubleBuffering in Java

- by DDP

Hello there, I'm having some trouble implementing DoubleBuffer into my program. Before you faint from the wall of text, you should know that a lot of it is there just in case you need to know. The actual place where I think I'm having problems is in one method. I've recently looked up a tutorial on the gpwiki about double buffering, and decided to try and implement the code they had into the code I have that I'm trying to implement doublebuffer in. I get the following error: "java.lang.IllegalStateException: Component must have a valid peer". I don't know if it makes any difference if you know it or not, but the following is the code with the main method. This is just a Frame that displays the ChronosDisplay class inside it. I omitted irrelevant code with "..." public class CDM extends JFrame { public CDM(String str) { super("CD:M - "+str); try { ... ChronosDisplay theGame = new ChronosDisplay(str); ((Component)theGame).setFocusable(true); add(theGame); } catch(Exception e) { System.out.println("CDM ERROR: " +e); } } public static void main( String args[] ) { CDM run = new CDM("DP_Mini"); } } Here is the code where I think the problem resides (I think the problem is in the paint() method). This class is displayed in the CDM class public class ChronosDisplay extends Canvas implements Runnable { String mapName; public ChronosDisplay (String str) { mapName = str; new Thread(this).start(); setVisible(true); createBufferStrategy(2); } public void paint( Graphics window ) { BufferStrategy b = getBufferStrategy(); Graphics g = null; window.setColor(Color.white); try { g = b.getDrawGraphics(); paintMap(g); paintUnits(g); paintBullets(g); } finally { g.dispose(); } b.show(); Toolkit.getDefaultToolkit().sync(); } public void paintMap( Graphics window ) { TowerMap m = new TowerMap(); try { m = new TowerMap(mapName); for(int x=0; x<m.getRows()*50; x+=50) { for(int y = 0; y<m.getCols()*50; y+=50) { int tileType = m.getLocation(x/50,y/50); Image img; if(tileType == 0) { Tile0 t = new Tile0(x,y); t.draw(window); } ...// More similar if statements for other integers } catch(Exception e) ... } ...// Additional methods not shown here public void run() { try { while(true) { Thread.currentThread().sleep(20); repaint(); } } catch(Exception e) ... } } If you're curious (I doubt it matters), the draw() method in the Tile0 class is: public void draw( Graphics window ) { window.drawImage(img,getX(),getY(),50,50,null); } Any pointers, tips, or solutions are greatly appreciated. Thanks for your time! :D

Read the article

PHP: How do I loop through every XML file in a directory?

- by celebritarian

Hi! I'm building a simple application. It's a user interface to an online order system. Basically, the system is going to work like this: Other companies upload their purchase orders to our FTP server. These orders are simple XML files (containing things like customer data, address information, ordered products and the quantities…) I've built a simple user interface in HTML5, jQuery and CSS — all powered by PHP. PHP reads the content of an order (using the built-in features of SimpleXML) and displays it on the web page. So, it's a web app, supposed to always be running in a browser at the office. The PHP app will display the content of all orders. Every fifteen minutes or so, the app will check for new orders. How do I loop through all XML files in a directory? Right now, my app is able to read the content of a single XML file, and display it in a nice way on the page. My current code looks like this: // pick a random order that I know exists in the Order directory: $xml_file = file_get_contents("Order/6366246.xml",FILE_TEXT); $xml = new SimpleXMLElement($xml_file); // start echo basic order information, like order number: echo $xml->OrderHead->ShopPO; // more information about the order and the customer goes here… echo "<ul>"; // loop through each order line, and echo all quantities and products: foreach ($xml->OrderLines->OrderLine as $orderline) { echo "<tr>\n". "<li>".$orderline->Quantity." st.</li>\n". "<li>".$orderline->SKU."</li>\n"; } echo "</ul>"; // more information about delivery options, address information etc. goes here… So, that's my code. Pretty simple. It only needs to do one thing — print out the content of all order files on the screen — so me and my colleagues can see the order, confirm it and deliver it. That's it. But right now — as you can see — I'm selecting one single order at a time, located in the Order directory. But how do I loop through the entire Order directory, and read aand display the content of each order (like above)? I'm stuck. I don't really know how you get all (xml) files in a directory and then do something with the files (like reading them and echo out the data, like I want to). -- I'd really appreciate some help. I'm not very experienced with PHP/server-side programming, so if you could help me out here I'd be very grateful. Thanks a lot in advance! // Björn (celebritarian at me dot com)

Read the article

Double Linked List Insertion Sorting Bug

- by house

Hello, I have implemented an insertion sort in a double link list (highest to lowest) from a file of 10,000 ints, and output to file in reverse order. To my knowledge I have implemented such a program, however I noticed in the ouput file, a single number is out of place. Every other number is in correct order. The number out of place is a repeated number, but the other repeats of this number are in correct order. Its just strange how this number is incorrectly placed. Also the unsorted number is only 6 places out of sync. I have looked through my program for days now with no idea where the problem lies, so I turn to you for help. Below is the code in question, (side note: can my question be deleted by myself? rather my colleges dont thieve my code, if not how can it be deleted?) void DLLIntStorage::insertBefore(int inValue, node *nodeB) { node *newNode; newNode = new node(); newNode->prev = nodeB->prev; newNode->next = nodeB; newNode->value = inValue; if(nodeB->prev==NULL) { this->front = newNode; } else { nodeB->prev->next = newNode; } nodeB->prev = newNode; } void DLLIntStorage::insertAfter(int inValue, node *nodeB) { node *newNode; newNode = new node(); newNode->next = nodeB->next; newNode->prev = nodeB; newNode->value = inValue; if(nodeB->next == NULL) { this->back = newNode; } else { nodeB->next->prev = newNode; } nodeB->next = newNode; } void DLLIntStorage::insertFront(int inValue) { node *newNode; if(this->front == NULL) { newNode = new node(); this->front = newNode; this->back = newNode; newNode->prev = NULL; newNode->next = NULL; newNode->value = inValue; } else { insertBefore(inValue, this->front); } } void DLLIntStorage::insertBack(int inValue) { if(this->back == NULL) { insertFront(inValue); } else { insertAfter(inValue, this->back); } } ifstream& operator>> (ifstream &in, DLLIntStorage &obj) { int readInt, counter = 0; while(!in.eof()) { if(counter==dataLength) //stops at 10,000 { break; } in >> readInt; if(obj.front != NULL ) { obj.insertion(readInt); } else { obj.insertBack(readInt); } counter++; } return in; } void DLLIntStorage::insertion(int inValue) { node* temp; temp = this->front; if(temp->value >= inValue) { insertFront(inValue); return; } else { while(temp->next!=NULL && temp!=this->back) { if(temp->value >= inValue) { insertBefore(inValue, temp); return; } temp = temp->next; } } if(temp == this->back) { insertBack(inValue); } } Thankyou for your time.

Read the article

Java Hibernate/C3P0 error: "Could not obtain connection metadata. An attempt by a client to checkout

- by Allan

I'm trying to get some code I was passed up and running. It appears to use the Hibernate framework. I've gotten past most of the errors tweaking the configuration, but this one has me dead stumped. It's trying to connect to two databases: gameapp and gamelog. Both exist. It seems to have issues connecting to gamelog, but none connecting to gameapp (later in the init, it connects to and loads other DBs just fine). Below, I've pasted the error and exception stack dump. I imaging there's something else in the configs, so I've also included the configuration file for that db. I know this is very vague, but I'm hoping some pro can see the stupid mistake I'm missing. <?xml version="1.0" encoding="GBK"?> <!DOCTYPE hibernate-configuration PUBLIC "-//Hibernate/Hibernate Configuration DTD 3.0//EN" "http://hibernate.sourceforge.net/hibernate-configuration-3.0.dtd"> <hibernate-configuration> <session-factory> <property name="dialect">org.hibernate.dialect.MySQLDialect</property> <property name="connection.driver_class">com.mysql.jdbc.Driver</property> <property name="connection.url">jdbc:mysql://127.0.0.1:3306/gamelog</property> <property name="connection.username">root</property> <property name="connection.password"></property> <property name="connection.useUnicode">true</property> <property name="connection.characterEncoding">UTF-8</property> <property name="hibernate.jdbc.batch_size">100</property> <property name="jdbc.fetch_size">1</property> <property name="hbm2ddl.auto">none</property> <property name="connection.useUnicode">true</property> <property name="show_sql">true</property>  <property name="hibernate.connection.provider_class">org.hibernate.connection.C3P0ConnectionProvider</property> <property name="hibernate.c3p0.min_size">5</property> <property name="hibernate.c3p0.max_size">10</property> <property name="hibernate.c3p0.timeout">30</property> <property name="hibernate.c3p0.idle_test_period">30</property> <property name="hibernate.c3p0.max_statements">0</property> <property name="hibernate.c3p0.acquire_increment">5</property> </session-factory> </hibernate-configuration> Exception and stack trace: 2010-04-30 17:50:00,411 WARN [org.hibernate.cfg.SettingsFactory] - Could not obtain connection metadata java.sql.SQLException: An attempt by a client to checkout a Connection has timed out. at com.mchange.v2.sql.SqlUtils.toSQLException(SqlUtils.java:106) at com.mchange.v2.sql.SqlUtils.toSQLException(SqlUtils.java:65) at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool.checkoutPooledConnection(C3P0PooledConnectionPool.java:527) at com.mchange.v2.c3p0.impl.AbstractPoolBackedDataSource.getConnection(AbstractPoolBackedDataSource.java:128) at org.hibernate.connection.C3P0ConnectionProvider.getConnection(C3P0ConnectionProvider.java:35) at org.hibernate.cfg.SettingsFactory.buildSettings(SettingsFactory.java:76) at org.hibernate.cfg.Configuration.buildSettings(Configuration.java:1933) at org.hibernate.cfg.Configuration.buildSessionFactory(Configuration.java:1216) at com.database.hibernate.util.HibernateFactory.<init>(Unknown Source) at com.database.hibernate.util.HibernateUtil.<clinit>(Unknown Source) at com.server.databaseop.goodOp.GoodOpImpl.initBreedGoods(Unknown Source) at com.server.databaseop.goodOp.GoodOpImpl.access$000(Unknown Source) at com.server.databaseop.goodOp.GoodOpImpl$1.run(Unknown Source) at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471) at java.util.concurrent.FutureTask$Sync.innerRunAndReset(FutureTask.java:351) at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:178) at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$201(ScheduledThreadPoolExecutor.java:165) at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:267) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) at java.lang.Thread.run(Thread.java:636) Caused by: com.mchange.v2.resourcepool.TimeoutException: A client timed out while waiting to acquire a resource from com.mchange.v2.resourcepool.BasicResourcePool@ca470 -- timeout at awaitAvailable() at com.mchange.v2.resourcepool.BasicResourcePool.awaitAvailable(BasicResourcePool.java:1317) at com.mchange.v2.resourcepool.BasicResourcePool.prelimCheckoutResource(BasicResourcePool.java:557) at com.mchange.v2.resourcepool.BasicResourcePool.checkoutResource(BasicResourcePool.java:477) at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool.checkoutPooledConnection(C3P0PooledConnectionPool.java:525) ... 18 more

Read the article

Play! Framework 1.2.4 --- C3P0 settings to avoid Communications link failure do to idle time

- by HelpMeStackOverflowMyOnlyHope

I'm trying to customize my C3P0 settings to avoid the error shown at the bottom of this post. It was suggested at this url --- http://make-it-open.blogspot.com/2008/12/sql-error-0-sqlstate-08s01.html --- to adjust the settings as follows: In hibernate.cfg.xml, write <property name="c3p0.min_size">5</property> <property name="c3p0.max_size">20</property> <property name="c3p0.timeout">1800</property> <property name="c3p0.max_statements">50</property> Then create "c3p0.properties" in your root classpath folder and write c3p0.testConnectionOnCheckout=true c3p0.acquireRetryDelay=1000 c3p0.acquireRetryAttempts=1 I've tried to make those adjustments following the direction of the Play! Framework documentation, where they say use "db.pool..." as follows: db.pool.timeout=1800 db.pool.maxSize=15 db.pool.minSize=5 db.pool.initialSize=5 db.pool.acquireRetryAttempts=1 db.pool.preferredTestQuery=SELECT 1 db.pool.testConnectionOnCheckout=true db.pool.acquireRetryDelay=1000 db.pool.maxStatements=50 Are those settings not going to work? Should I be trying to set them in a different way? With those settings I still get the error shown below, that is due to to long of a idle time. Complete Stack Trace of Error: 23:00:44,932 WARN ~ SQL Error: 0, SQLState: 08S01 2012-04-13T23:00:44+00:00 app[web.1]: 23:00:44,932 ERROR ~ Communications link failure 2012-04-13T23:00:44+00:00 app[web.1]: 2012-04-13T23:00:44+00:00 app[web.1]: The last packet successfully received from the server was 274,847 milliseconds ago. The last packet sent successfully to the server was 7 milliseconds ago. 2012-04-13T23:00:44+00:00 app[web.1]: 23:00:44,934 ERROR ~ Why the driver complains here? 2012-04-13T23:00:44+00:00 app[web.1]: com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException: No operations allowed after connection closed.Connection was implicitly closed by the driver. 2012-04-13T23:00:44+00:00 app[web.1]: at com.mysql.jdbc.Util.handleNewInstance(Util.java:407) 2012-04-13T23:00:44+00:00 app[web.1]: at com.mysql.jdbc.Util.getInstance(Util.java:382) 2012-04-13T23:00:44+00:00 app[web.1]: at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:1013) 2012-04-13T23:00:44+00:00 app[web.1]: at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:987) 2012-04-13T23:00:44+00:00 app[web.1]: at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:982) 2012-04-13T23:00:44+00:00 app[web.1]: at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:927) 2012-04-13T23:00:44+00:00 app[web.1]: at com.mysql.jdbc.ConnectionImpl.throwConnectionClosedException(ConnectionImpl.java:1213) 2012-04-13T23:00:44+00:00 app[web.1]: at com.mysql.jdbc.ConnectionImpl.getMutex(ConnectionImpl.java:3101) 2012-04-13T23:00:44+00:00 app[web.1]: at com.mysql.jdbc.ConnectionImpl.setAutoCommit(ConnectionImpl.java:4975) 2012-04-13T23:00:44+00:00 app[web.1]: at org.hibernate.jdbc.BorrowedConnectionProxy.invoke(BorrowedConnectionProxy.java:74) 2012-04-13T23:00:44+00:00 app[web.1]: at $Proxy49.setAutoCommit(Unknown Source) 2012-04-13T23:00:44+00:00 app[web.1]: at play.db.jpa.JPAPlugin.closeTx(JPAPlugin.java:368) 2012-04-13T23:00:44+00:00 app[web.1]: at play.db.jpa.JPAPlugin.onInvocationException(JPAPlugin.java:328) 2012-04-13T23:00:44+00:00 app[web.1]: at play.plugins.PluginCollection.onInvocationException(PluginCollection.java:447) 2012-04-13T23:00:44+00:00 app[web.1]: at play.Invoker$Invocation.onException(Invoker.java:240) 2012-04-13T23:00:44+00:00 app[web.1]: at play.jobs.Job.onException(Job.java:124) 2012-04-13T23:00:44+00:00 app[web.1]: at play.jobs.Job.call(Job.java:163) 2012-04-13T23:00:44+00:00 app[web.1]: at play.jobs.Job$1.call(Job.java:66) 2012-04-13T23:00:44+00:00 app[web.1]: at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334) 2012-04-13T23:00:44+00:00 app[web.1]: at java.util.concurrent.FutureTask.run(FutureTask.java:166) 2012-04-13T23:00:44+00:00 app[web.1]: at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:165) 2012-04-13T23:00:44+00:00 app[web.1]: at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:266) 2012-04-13T23:00:44+00:00 app[web.1]: at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) 2012-04-13T23:00:44+00:00 app[web.1]: at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) 2012-04-13T23:00:44+00:00 app[web.1]: at java.lang.Thread.run(Thread.java:636) 2012-04-13T23:00:44+00:00 app[web.1]: Caused by: com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: Communications link failure

Read the article

Limiting TCP sends with a "to-be-sent" queue and other design issues.

- by Poni

Hello all! This question is the result of two other questions I've asked in the last few days. I'm creating a new question because I think it's related to the "next step" in my understanding of how to control the flow of my send/receive, something I didn't get a full answer to yet. The other related questions are: http://stackoverflow.com/questions/3028376/an-iocp-documentation-interpretation-question-buffer-ownership-ambiguity http://stackoverflow.com/questions/3028998/non-blocking-tcp-buffer-issues In summary, I'm using Windows I/O Completion Ports. I have several threads that process notifications from the completion port. I believe the question is platform-independent and would have the same answer as if to do the same thing on a *nix, *BSD, Solaris system. So, I need to have my own flow control system. Fine. So I send send and send, a lot. How do I know when to start queueing the sends, as the receiver side is limited to X amount? Let's take an example (closest thing to my question): FTP protocol. I have two servers; One is on a 100Mb link and the other is on a 10Mb link. I order the 100Mb one to send to the other one (the 10Mb linked one) a 1GB file. It finishes with an average transfer rate of 1.25MB/s. How did the sender (the 100Mb linked one) knew when to hold the sending, so the slower one wouldn't be flooded? Another way to ask this: Can I get a "hold-your-sendings" notification from the remote side? Is it built-in in TCP or the so called "reliable network protocol" needs me to do so? Again, I have a loop with many sends to a remote server, and at some point, within that loop I'll have to determine if I should queue that send or I can pass it on to the transport layer (TCP). How do I do that? What would you do? Of course that when I get a completion notification from IOCP that the send was done I'll issue other pending sends, that's clear. Another design question related to this: Since I am to use a custom buffers with a send queue, and these buffers are being freed to be reused (thus not using the "delete" keyword) when a "send-done" notification has been arrived, I'll have to use a mutual exlusion on that buffer pool. Using a mutex slows things down, so I've been thinking; Why not have each thread have its own buffers pool, thus accessing it , at least when getting the required buffers for a send operation, will require no mutex, because it belongs to that thread only. The buffers pool is located at the thread local storage (TLS) level. No mutual pool implies no lock needed, implies faster operations BUT also implies more memory used by the app, because even if one thread already allocated 1000 buffers, the other one that is sending right now and need 1000 buffers to send something will need to allocated these to its own. This is a long question and I hope none got hurt (: Thank you all!

Read the article

Concurrency and Calendar classes

- by fbielejec

I have a thread (class implementing runnable, called AnalyzeTree) organised around a hash map (ConcurrentMap slicesMap). The class goes through the data (called trees here) in the large text file and parses the geographical coordinates from it to the HashMap. The idea is to process one tree at a time and add or grow the values according to the key (which is just a Double value representing time). The relevant part of code looks like this: // grow map entry if key exists if (slicesMap.containsKey(sliceTime)) { double[] imputedLocation = imputeValue( location, parentLocation, sliceHeight, nodeHeight, parentHeight, rate, useTrueNoise, currentTreeNormalization, precisionArray); slicesMap.get(sliceTime).add( new Coordinates(imputedLocation[1], imputedLocation[0], 0.0)); // start new entry if no such key in the map } else { List<Coordinates> coords = new ArrayList<Coordinates>(); double[] imputedLocation = imputeValue( location, parentLocation, sliceHeight, nodeHeight, parentHeight, rate, useTrueNoise, currentTreeNormalization, precisionArray); coords.add(new Coordinates(imputedLocation[1], imputedLocation[0], 0.0)); slicesMap.putIfAbsent(sliceTime, coords); // slicesMap.put(sliceTime, coords); }// END: key check And the class is called like this (executor is ExecutorService executor = Executors.newFixedThreadPool(NTHREDS) ): mrsd = new SpreadDate(mrsdString); int readTrees = 1; while (treesImporter.hasTree()) { currentTree = (RootedTree) treesImporter.importNextTree(); executor.submit(new AnalyzeTree(currentTree, precisionString, coordinatesName, rateString, numberOfIntervals, treeRootHeight, timescaler, mrsd, slicesMap, useTrueNoise)); // new AnalyzeTree(currentTree, precisionString, // coordinatesName, rateString, numberOfIntervals, // treeRootHeight, timescaler, mrsd, slicesMap, // useTrueNoise).run(); readTrees++; }// END: while has trees Now this is running into troubles when executed in parallel (the commented part running sequentially is fine), I thought it might throw a ConcurrentModificationException, but apparently the problem is in mrsd (instance of SpreadDate object, which is simply a class for date related calculations). The SpreadDate class looks like this: public class SpreadDate { private Calendar cal; private SimpleDateFormat formatter; private Date stringdate; public SpreadDate(String date) throws ParseException { // if no era specified assume current era String line[] = date.split(" "); if (line.length == 1) { StringBuilder properDateStringBuilder = new StringBuilder(); date = properDateStringBuilder.append(date).append(" AD") .toString(); } formatter = new SimpleDateFormat("yyyy-MM-dd G", Locale.US); stringdate = formatter.parse(date); cal = Calendar.getInstance(); } public long plus(int days) { cal.setTime(stringdate); cal.add(Calendar.DATE, days); return cal.getTimeInMillis(); }// END: plus public long minus(int days) { cal.setTime(stringdate); cal.add(Calendar.DATE, -days); //line 39 return cal.getTimeInMillis(); }// END: minus public long getTime() { cal.setTime(stringdate); return cal.getTimeInMillis(); }// END: getDate } And the stack trace from when exception is thrown: java.lang.ArrayIndexOutOfBoundsException: 58 at sun.util.calendar.BaseCalendar.getCalendarDateFromFixedDate(BaseCalendar.java:454) at java.util.GregorianCalendar.computeFields(GregorianCalendar.java:2098) at java.util.GregorianCalendar.computeFields(GregorianCalendar.java:2013) at java.util.Calendar.setTimeInMillis(Calendar.java:1126) at java.util.GregorianCalendar.add(GregorianCalendar.java:1020) at utils.SpreadDate.minus(SpreadDate.java:39) at templates.AnalyzeTree.run(AnalyzeTree.java:88) at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334) at java.util.concurrent.FutureTask.run(FutureTask.java:166) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) at java.lang.Thread.run(Thread.java:636) If a move the part initializing mrsd to the AnalyzeTree class it runs without any problems - however it is not very memory efficient to initialize class each time this thread is running, hence my concerns. How can it be remedied?

Search Results

Search found 5793 results on 232 pages for 'ftp sync'.

Page 223/232 | < Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230 | Next Page >

- by Ace Paus

- by del

- by radutzan

- by Belliez

- by OregonGhost

- by AMissico

- by Paul Smith

- by Markus

- by ipaterson

- by user362155

- by digitall

- by typoknig

- by richever

- by Sadi

- by Steve H

- by Richard Knop

- by RobertPitt

- by AMissico

- by DDP

- by celebritarian

- by house

- by Allan

- by HelpMeStackOverflowMyOnlyHope

- by Poni

- by fbielejec

< Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230 | Next Page >