Search Results

Search found 6337 results on 254 pages for 'tips and tricks'.

Page 223/254 | < Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >

  • Problems when trying to connect to a router wirelessly

    - by Ruud Lenders
    The situation - At my girlfriend's parents' place there are six Windows 7 devices that are wired or wireless connected to a router: 3 dekstops and 3 laptops. There are also several smartphones using the router. The router is secured with WPA2 (AES). The problem - We never had any problems with the router for over a year. But recently - about 3 weeks ago - my girlfriend's laptop (HP) and my laptop (ASUS) started to develop problems while trying to connect to the router. The router has stopped showing up from the network list. Sometimes it comes back and shows up, but then it keeps saying something along the lines of "Could not connect", and not long after that it dissapears again. The range of the router is not the problem here, because we experience the same when we sit next to the router. Sometimes, if we are lucky, and waited a long time (10-15 minutes) without using the laptop for anything, the laptop will eventually succesful connect to the router. The attempts - Of course, the Window 7 troubleshooter. We tried troubleshooting the connection problems and the wireless network adapter, but no luck. We also reset the router enough times to know that's not helping either. Here's the full list of things we tried, but did not help: Running the Windows 7 troubleshooter Resetting the router (more than once) Setting the router settings to factory defaults Disconnecting all other devices except one laptop Applying a system restore Trying static/dynamic IP/DNS - Dynamic is better, right? Enabling/disabling IPv6 - Should I keep IPv6 disabled? Running the command: netsh wlan stop hostednetwork Running the command: netsh wlan set hostednetwork mode=disallow Updating/reïnstalling wireless adapter drivers The tests - To help finding the core of the problem, we tested the following: Plugging an ethernet cable in the router and in our laptops - worked fine Connecting someone else's laptop to the router (wireless) - worked fine Connecting our laptops to someone else's router - worked fine The router - This information might be relevant: Router model: Sitecom 300N Wireless Router Router hardware: version 01 The DCHP Server's IPs range from 192.168.0.100 to 192.168.0.200. Router settings: Wireless channel: 12 Channel bandwidth: 20/40 MHz Extension channel: 8 Preamble type: Long 802.11g protection: Disabled UPnP: Enabled The laptops - If you are wondering about our laptops: My laptop model: ASUS Pro64JQ Girlfriend's laptop: HP Pavillion G6 OS: Both Windows 7 Professional x64 - with Service Pack 1 My wireless adapter: Atheros AR9285 AdHoc 11n: Enabled The question - Does anyone have experienced the same problems as I do? Or does someone know how to solve this? Are there more tricks I can try, or settings I should change? Note - Our laptops are not slow or old. My laptop is 1.5 years old, and the other laptop is just 5 months old. I know how to keep laptops clean and I'm pretty sure both laptops are not bloated with useless software.

    Read the article

  • Proxy Error 502 "Reason: Error reading from remote server" with Apache 2.2.3 (Debian) mod_proxy and Jetty 6.1.18

    - by Martin
    Apache is receiving requests at port :80 and proxying them to Jetty at port :8080 The proxy server received an invalid response from an upstream server The proxy server could not handle the request GET /. My dilemma: Everything works fine normally (fast requests, few seconds or few tens of seconds long requests are processed ok). Problems occur when request processing takes long (few minutes?). If I issue request instead directly to Jetty at port :8080 the request is processed OK. So problem is likely to sit somewhere between Apache and Jetty where I am using mod_proxy. How to solve this? I have already tried some "tricks" related to KeepAlive settings, without luck. Here is my current configuration, any suggestions? #keepalive Off ## I have tried this, does not help #SetEnv force-proxy-request-1.0 1 ## I have tried this, does not help #SetEnv proxy-nokeepalive 1 ## I have tried this, does not help #SetEnv proxy-initial-not-pooled 1 ## I have tried this, does not help KeepAlive 20 ## I have tried this, does not help KeepAliveTimeout 600 ## I have tried this, does not help ProxyTimeout 600 ## I have tried this, does not help NameVirtualHost *:80 <VirtualHost _default_:80> ServerAdmin [email protected] ServerName www.mydomain.fi ServerAlias mydomain.fi mydomain.com mydomain www.mydomain.com ProxyRequests On ProxyVia On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyRequests Off ProxyPass / http://www.mydomain.fi:8080/ retry=1 acquire=3000 timeout=600 ProxyPassReverse / http://www.mydomain.fi:8080/ RewriteEngine On RewriteCond %{SERVER_NAME} !^www\.mydomain\.fi RewriteRule /(.*) http://www.mydomain.fi/$1 [redirect=301L] ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On </VirtualHost> Here is also the debug log from a failing request: 74.125.43.99 - - [29/Sep/2010:20:15:40 +0300] "GET /?wicket:bookmarkablePage=newWindow:com.mydomain.view.application.reports.SaveReportPage HTTP/1.1" 502 355 "https://www.mydomain.fi/?wicket:interface=:0:2:::" "Mozilla/5.0 (Windows; U; Windows NT 6.1; fi; rv:1.9.2.10) Gecko/20100914 Firefox/3.6.10" [Wed Sep 29 20:20:40 2010] [error] [client 74.125.43.99] proxy: error reading status line from remote server www.mydomain.fi, referer: https://www.mydomain.fi/?wicket:interface=:0:2::: [Wed Sep 29 20:20:40 2010] [error] [client 74.125.43.99] proxy: Error reading from remote server returned by /, referer: https://www.mydomain.fi/?wicket:interface=:0:2:::

    Read the article

  • Proxy Error 502 "Reason: Error reading from remote server" with Apache 2.2.3 (Debian) mod_proxy and Jetty 6.1.18

    - by Martin
    Apache is receiving requests at port :80 and proxying them to Jetty at port :8080 The proxy server received an invalid response from an upstream server The proxy server could not handle the request GET /. My dilemma: Everything works fine normally (fast requests, few seconds or few tens of seconds long requests are processed ok). Problems occur when request processing takes long (few minutes?). If I issue request instead directly to Jetty at port :8080 the request is processed OK. So problem is likely to sit somewhere between Apache and Jetty where I am using mod_proxy. How to solve this? I have already tried some "tricks" related to KeepAlive settings, without luck. Here is my current configuration, any suggestions? #keepalive Off ## I have tried this, does not help #SetEnv force-proxy-request-1.0 1 ## I have tried this, does not help #SetEnv proxy-nokeepalive 1 ## I have tried this, does not help #SetEnv proxy-initial-not-pooled 1 ## I have tried this, does not help KeepAlive 20 ## I have tried this, does not help KeepAliveTimeout 600 ## I have tried this, does not help ProxyTimeout 600 ## I have tried this, does not help NameVirtualHost *:80 <VirtualHost _default_:80> ServerAdmin [email protected] ServerName www.mydomain.fi ServerAlias mydomain.fi mydomain.com mydomain www.mydomain.com ProxyRequests On ProxyVia On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyRequests Off ProxyPass / http://www.mydomain.fi:8080/ retry=1 acquire=3000 timeout=600 ProxyPassReverse / http://www.mydomain.fi:8080/ RewriteEngine On RewriteCond %{SERVER_NAME} !^www\.mydomain\.fi RewriteRule /(.*) http://www.mydomain.fi/$1 [redirect=301L] ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On </VirtualHost> Here is also the debug log from a failing request: 74.125.43.99 - - [29/Sep/2010:20:15:40 +0300] "GET /?wicket:bookmarkablePage=newWindow:com.mydomain.view.application.reports.SaveReportPage HTTP/1.1" 502 355 "https://www.mydomain.fi/?wicket:interface=:0:2:::" "Mozilla/5.0 (Windows; U; Windows NT 6.1; fi; rv:1.9.2.10) Gecko/20100914 Firefox/3.6.10" [Wed Sep 29 20:20:40 2010] [error] [client 74.125.43.99] proxy: error reading status line from remote server www.mydomain.fi, referer: https://www.mydomain.fi/?wicket:interface=:0:2::: [Wed Sep 29 20:20:40 2010] [error] [client 74.125.43.99] proxy: Error reading from remote server returned by /, referer: https://www.mydomain.fi/?wicket:interface=:0:2:::

    Read the article

  • ssh client problem: Connection reset by peer

    - by yonix
    I'm having a really annoying problem on my Ubuntu laptop. I noticed it today, after upgrading to Ubuntu 11.04, although I'm not entirely sure this is the cause as I played with my ssh keys a few days ago. The problem is, whenever I try to ssh to ANY host I get the following error: Read from socket failed: Connection reset by peer running with -vvv gives the following output: OpenSSH_5.8p1 Debian-1ubuntu3, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to hostname [10.0.0.2] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/id_rsa type -1 debug1: identity file /root/.ssh/id_rsa-cert type -1 debug1: identity file /root/.ssh/id_dsa type -1 debug1: identity file /root/.ssh/id_dsa-cert type -1 debug1: identity file /root/.ssh/id_ecdsa type -1 debug1: identity file /root/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 1.99, remote software version OpenSSH_4.2 debug1: match: OpenSSH_4.2 pat OpenSSH_4* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1 Debian-1ubuntu3 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "hostname" from file "/root/.ssh/known_hosts" debug3: load_hostkeys: loaded 0 keys debug1: SSH2_MSG_KEXINIT sent Read from socket failed: Connection reset by peer My /etc/ssh/ssh_config: Host * SendEnv LANG LC_* HashKnownHosts yes GSSAPIAuthentication no GSSAPIDelegateCredentials no I can connect to my laptop from any other server via ssh, and I can also ssh localhost from my laptop successfully. I can connect to all these other server from other laptops, and I don't see anything in the logs of the other servers regarding my failed attempt. I tried to stop iptables, didn't help. I tried several tricks I could find online with my /etc/ssh/ssh_config, but I was unsuccessful in solving the problem... Any ideas? Edit: This is the log from one of the hosts I try to connect to: May 1 19:15:23 localhost sshd[2845]: debug1: Forked child 2847. May 1 19:15:23 localhost sshd[2845]: debug3: send_rexec_state: entering fd = 8 config len 577 May 1 19:15:23 localhost sshd[2845]: debug3: ssh_msg_send: type 0 May 1 19:15:23 localhost sshd[2845]: debug3: send_rexec_state: done May 1 19:15:23 localhost sshd[2847]: debug1: rexec start in 5 out 5 newsock 5 pipe 7 sock 8 May 1 19:15:23 localhost sshd[2847]: debug1: inetd sockets after dupping: 3, 3 May 1 19:15:23 localhost sshd[2847]: Connection from 10.0.0.7 port 55747 May 1 19:15:23 localhost sshd[2847]: debug1: Client protocol version 2.0; client software version OpenSSH_5.8p1 Debian-1ubuntu3 May 1 19:15:23 localhost sshd[2847]: debug1: match: OpenSSH_5.8p1 Debian-1ubuntu3 pat OpenSSH* May 1 19:15:23 localhost sshd[2847]: debug1: Enabling compatibility mode for protocol 2.0 May 1 19:15:23 localhost sshd[2847]: debug1: Local version string SSH-2.0-OpenSSH_5.3 May 1 19:15:23 localhost sshd[2847]: debug2: fd 3 setting O_NONBLOCK May 1 19:15:23 localhost sshd[2847]: debug2: Network child is on pid 2848 May 1 19:15:23 localhost sshd[2847]: debug3: preauth child monitor started May 1 19:15:23 localhost sshd[2847]: debug3: mm_request_receive entering May 1 19:15:23 localhost sshd[2848]: debug3: privsep user:group 74:74 May 1 19:15:23 localhost sshd[2848]: debug1: permanently_set_uid: 74/74 May 1 19:15:23 localhost sshd[2848]: debug1: list_hostkey_types: ssh-rsa,ssh-dss May 1 19:15:23 localhost sshd[2848]: debug1: SSH2_MSG_KEXINIT sent May 1 19:15:23 localhost sshd[2848]: debug3: Wrote 784 bytes for a total of 805 May 1 19:15:23 localhost sshd[2848]: fatal: Read from socket failed: Connection reset by peer

    Read the article

  • Recovering from backup without original install media

    - by KGendron
    A machine from my old job had a complete hard drive failure. I have backups but I'm running into severe problems restoring from them. The only install media was a secondary restore partition on the system's hard drive. I hate whoever came up with that idea more than i can possibly express with words. I spent several days trying to recover the disk - it is pretty well shot and none of my best tricks could even get it to show up in the bios/ The machine that broke is an hp with xp media center edition on it (I don't know why either). The backups were created using the default windows backup tool - I have .bfk file on an external hardrive that i am trying to restore from. I've replaced the hard drive. My home machine is running windows 7 64bit and i'm trying to use it as a platform to restore to the other disk. I downloaded the window 7 nt-restore utility, however no matter what i do it restores to my C drive rather than the specified drive. Fortunately win7 security settings prevented it from being a complete disaster - but still not a happy thing. I tried firing up the xp virtual machine. I can browse to the backups but it says they are invalid and refuse to let me view/ continue with the restore. I tried installing XP to an extra harddrive on my machine - however it bluescreens on me during the install process and I cry. I tried installing xp pro to the new drive and attempted to restore over it, it of course blackscreened on me as that was a stupid idea. I made two partitions on the new hard drive (Apparently the bios on this accursed piece of junk doesn't allow hd partitions larger than 200G anyways and thus fails 40 minutes into the install with an ever-descriptive "Disk Read Error". Guess how i spent last weekend? My last idea was to install xp pro to the second partition and then use it to restore from backup to the first. After the first restart it gives me the error "Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware". My brain made one of those bad hard drive clicky noises. I've tried several boot disks but they don't seem to work. If anyone has a link to a good one it would be greatly appreciated. Anyone have any more ideas? - I really hate asking on what seems like such a simple issue but i am quite literally at my wit's end. Thanks - and sorry for the really long post.

    Read the article

  • Lenovo Windows 8 EFI restore from image

    - by anderhil
    First time here. I have bought e530 with windows 8 and the first hour of work with it i have a problem. I have ssd with windows 7 which i want to use with my new e530. I have made a sysprep of win 7 and installed ssd to the e530. The HDD which was inside e530 i want to use as second hdd instead of my DVD Drive. I connected this HDD through usb-to-sata adapter to copy some files from ssd to the hdd. Unfortunately it didn't see the file system on the HDD (but first time i have booted to it and first boot into Windows 8) I've made some mistakes and i corrupt the filesystem on the hdd. I tried bunch of tricks to recover the GPT, but it didn't work. I have managed to recover the Lenovo_Recovery partition to my ssd using recovery tools. And now I'm stuck, with this new things to me - EFI, GPT, etc i don't how this stuff works, and i have been trying to understand this for hours - but nothing seems to work. I want to restore the Windows 8 to the hdd, so it is there alive. What i have done so far: Formated the HDD I took the PBRALL file from the Lenovo_Recovery " convert gpt create partition Primary size=1000 ID=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC gpt attributes=0x8000000000000001 assign letter=W format quick LABEL=WINRE_DRV create partition efi size=260 assign letter=s format quick fs=fat32 LABEL=SYSTEM_DRV create par msr size=128 create partition primary noerr assign letter=t format quick LABEL=Windows8_OS shrink desired=12197 create partition Primary ID=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC gpt attributes=0x8000000000000001 assign letter=q format quick LABEL=Lenovo_Recovery " it recreated the partitions copied contents of SDRIVE.zip to SYSTEM_DRV partition copied contents of WDRIVE.zip to WINRE_DRV partition Copied restored Lenovo_Recovery back to Lenovo_Recovery partition So now I have 3 system partitions: SYSTE_DRV BOOT boot.sdi EFI BOOT bootx64.efi LenovoBT.efi Lenovo ... Microsoft ... WINRE_DRV\Recovery\WindowsRE\winre.wim Lenovo_Recovery (whic contains install.wim and bunch of other things) So i put back the HDD inside the laptop and tried to boot - but nothing works. It just doesn't boot to anything - no errors - nothing at all. When I choose this HDD manually for boot - just black screen blinks and that's all - it returns back to the devices boot menu. SYSTEM_DRV is EFI partition, so I don't understand why it doesn't boot, it has files needed inside. Can anybody tell me what should be done to make it boot to recovery console or smth like that? How to restore the Windows 8 from the Lenovo_Recovery install.wim image? As I understand I have all the files where they should be, but why it doesn't work? How to troubleshoot such things? Also, if somebody has good link where EFI booting process is explained in details that would be great. Cause i still don't understand how it knows what partition to boot?

    Read the article

  • Internet Pings but Does Not Load

    - by t3techcom18
    From what I've been seeing and been doing my research for the past two days, many people have been having the same issues throughout the years, however, this is the first time I've encountered this issue and many of the specific workarounds or fixes have not worked for me. I've been trying to work through this for 24 hours straight now, but to no avail so many thanks to those that can help. On Monday night, got home from work; surfing the internet for half an hour, everything was fine as always. Just after half an hour, my Internet got very sluggish and then it died completely. I thought it might have been the an update I just put through in terms of Windows Update that said was a critical update for MSE, as the same thing happened a few years ago. I did a System Restore to two different dates that were in the past two weeks, nothing. Uninstalled MSE and disabled Windows Defender and the Windows Firewall: Nothing. Reset IE Options, Reset Winsock, Dumping DNS, many of the other command prompt screens to reset items: Nothing. Reset the modem: Nothing. What DID work, however, was a ping test to Yahoo. The ping test worked, saying all four packets was recieved, yet nothing else popped up. LAN and CenturyLink said everything worked on their end and that everything was connected properly, as well as the speeds working fine. CenturyLink said in their notes that they thought Port 80 was blocked. I went and put in the Firewall to allow Port 80 but it didn't make any difference whatsoever. I remembered I had a spare modem laying around and I switched them up, both modem and the cords - nothing. I then hooked it up to my netbook to see if that would work, as it usually does - connection didn't work there either. Like I said, it's been about 24 hours now and this is increasingly frustrating, as I've tried all solutions (While browsing through 10 search results pages on my phone) suggested and still nothing. Any suggestions and tricks would be greatly appreciated! Here's my specs: Windows 7 32-bit Home Premium Intel Core 2 Duo 3.14 Ghz 4 GB Kingston DDR2 RAM eVGA nForce 750i SLI eVGA GeForce GTX 560 Ti FPB ISP: CenturyLink No router Modem: CenturyLink 660 Series Hardwired connection PLEASE NOTE: This is the only computer I have (Like I said, the netbook solution didn't work), so downloading programs and such is not an option til I get to other computers somewhere else, like right now. Unless someone knows of a way of copying/pasting a file in Windows and then transferring said info to an Android smartphone, this is gunna take a while haha. Patience is requested.

    Read the article

  • Ask How-To Geek: Learning the Office Ribbon, Booting to USB with an Old BIOS, and Snapping Windows

    - by Jason Fitzpatrick
    You’ve got questions and we’ve got answers. Today we highlight how to master the new Office interface, USB boot a computer with outdated BIOS, and snap windows to preset locations. Learning the New Office Ribbon Dear How-To Geek, I feel silly asking this (in light of how long the new Office interface has been out) but my company finally got around to upgrading from Windows XP and Office 2000 so the new interface it totally new to me. Can you recommend any resources for quickly learning the Office ribbon and the new changes? I feel completely lost after two decades of the old Office interface. Help! Sincerely, Where the Hell is Everything? Dear Where the Hell, We think most people were with you at some point in the last few years. “Where the hell is…” could possibly be the slogan for the new ribbon interface. You could browse through some of the dry tutorials online or even get a weighty book on the topic but the best way to learn something new is to get hands on. Ribbon Hero turns learning the new Office features and ribbon layout into a game. It’s no vigorous round of Team Fortress mind you, but it’s significantly more fun than reading a training document. Check out how to install and configure Ribbon Hero here. You’ll be teaching your coworkers new tricks in no time. Boot via USB with an Old BIOS Dear How-To Geek, I’m trying to repurpose some old computers by updating them with lightweight Linux distros but the BIOS on most of the machines is ancient and creaky. How ancient? It doesn’t even support booting from a USB device! I have a large flash drive that I’ve turned into a master installation tool for jobs like this but I can’t use it. The computers in question have USB ports; they just aren’t recognized during the boot process. What can I do? USB Bootin’ in Boise Dear USB Bootin’, It’s great you’re working to breathe life into old hardware! You’ve run into one of the limitations of older BIOSes, USB was around but nobody was thinking about booting off of it. Fortunately if you have a computer old enough to have that kind of BIOS it’s likely to also has a floppy drive or a CDROM drive. While you could make a bootable CDROM for your application we understand that you want to keep using the master USB installer you’ve made. In light of that we recommend PLoP Boot Manager. Think of it like a boot manager for your boot manager. Using it you can create a bootable floppy or CDROM that will enable USB booting of your master USB drive. Make a CD and a floppy version and you’ll have everything in your toolkit you need for future computer refurbishing projects. Read up on creating bootable media with PLoP Boot Manager here. Snapping Windows to Preset Coordinates Dear How-To Geek, Once upon a time I had a company laptop that came with a little utility that snapped windows to preset areas of the screen. This was long before the snap-to-side features in Windows 7. You could essentially configure your screen into a grid pattern of your choosing and then windows would neatly snap into those grids. I have no idea what it was called or if was anymore than a gimmick from the computer manufacturer, but I’d really like to have it on my new computer! Bend and Snap in San Francisco, Dear Bend and Snap, If we had to guess, we’d guess your company must have had a set of laptops from Acer as the program you’re describing sounds exactly like Acer GridVista. Fortunately for you the application was extremely popular and Acer released it independently of their hardware. If, by chance, you’ve since upgraded to a multiple monitor setup the app even supports multiple monitors—many of the configurations are handy for arranging IM windows and other auxiliary communication tools. Check out our guide to installing and configuring Acer GridVista here for more information. Have a question you want to put before the How-To Geek staff? Shoot us an email at [email protected] and then keep an eye out for a solution in the Ask How-To Geek column. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Download the New Year in Japan Windows 7 Theme from Microsoft Once More Unto the Breach – Facebook Apps Can Now Access Your Address and Phone Number Dial Zero Speeds You Through Annoying Customer Service Menus Complete Dropquest 2011 and Receive Free Dropbox Storage Desktop Computer versus Laptop Wallpaper The Kids Have No Idea What Old Tech Is [Video]

    Read the article

  • Cocos2d-xna memory management for WP8

    - by Arkiliknam
    I recently upgraded to VS2012 and try my in dev game out on the new WP8 emulators but was dismayed to find out the emulator now crashes and throws an out of memory exception during my sprite loading procedure (funnily, it still works in WP7 emulators and on my WP7). Regardless of whether the problem is the emulator or not, I want to get a clear understanding of how I should be managing memory in the game. My game consists of a character whom has 4 or more different animations. Each animation consists of 4 to 7 frames. On top of that, the character has up to 8 stackable visualization modifications (eg eye type, nose type, hair type, clothes type). Pre memory issue, I preloaded all textures for each animation frame and customization and created animate action out of them. The game then plays animations using the customizations applied to that current character. I re-looked at this implementation when I received the out of memory exceptions and have started playing with RenderTexture instead, so instead of pre loading all possible textures, it on loads textures needed for the character, renders them onto a single texture, from which the animation is built. This means the animations use 1/8th of the sprites they were before. I thought this would solve my issue, but it hasn't. Here's a snippet of my code: var characterTexture = CCRenderTexture.Create((int)width, (int)height); characterTexture.BeginWithClear(0, 0, 0, 0); // stamp a body onto my texture var bodySprite = MethodToCreateSpecificSprite(); bodySprite.Position = centerPoint; bodySprite.Visit(); bodySprite.Cleanup(); bodySprite = null; // stamp eyes, nose, mouth, clothes, etc... characterTexture.End(); As you can see, I'm calling CleanUp and setting the sprite to null in the hope of releasing the memory, though I don't believe this is the right way, nor does it seem to work... I also tried using SharedTextureCache to load textures before Stamping my texture out, and then clearing the SharedTextureCache with: CCTextureCache.SharedTextureCache.RemoveAllTextures(); But this didn't have an effect either. Any tips on what I'm not doing? I used VS to do a memory profile of the emulation causing the crash. Both WP7.1 and WP8 emulators peak at about 150mb of usage. WP8 crashes and throws an out of memory exception. Each customisation/frame is 15kb at the most. Lets say there are 8 layers of customisation = 120kb but I render then onto one texture which I would assume is only 15kb again. Each animation is 8 frames at the most. That's 15kb for 1 texture, or 960kb for 8 textures of customisation. There are 4 animation sets. That's 60Kb for 4 sets of 1 texture, or 3.75MB for 4 sets of 8 textures of customisation. So even if its storing every layer, its 3.75MB.... no where near the 150mb breaking point my profiler seems to suggest :( WP 7.1 Memory Profile (max 150MB) WP8 Memory Profile (max 150MB and crashes)

    Read the article

  • PowerShell Control over Nikon D3000 Camera

    My wife got me a Nikon D3000 camera for Christmas last year, and Im loving it but still trying to wrap my head around some of its features.  For instance, when you plug it into a computer via USB, it doesnt show up as a drive like most cameras Ive used to, but rather it shows up as Computer\D3000.  After a bit of research, Ive learned that this is because it implements the MTP/PTP protocol, and thus doesnt actually let Windows mount the cameras storage as a drive letter.  Nikon describes the use of the MTP and PTP protocols in their cameras here. What Im really trying to do is gain access to the cameras file system via PowerShell.  Ive been using a very handy PowerShell script to pull pictures off of my cameras and organize them into folders by date.  Id love to be able to do the same thing with my Nikon D3000, but so far I havent been able to figure out how to get access to the files in PowerShell.  If you know, Id appreciate any links/tips you can provide.  All I could find is a shareware product called PTPdrive, which Im not prepared to shell out money for (yet).  (and yes you can do much the same thing with Windows 7s Import Pictures and Videos wizard, which is pretty good too) However, in my searching, I did find some really cool stuff you can do with PowerShell and one of these cameras, like actually taking pictures via PowerShell commands.  Credit for this goes to James ONeill and Mark Wilson.  Heres what I was able to do: Taking Pictures via PowerShell with D3000 First, connect your camera, turn it on, and launch PowerShell.  Execute the following commands to see what commands your device supports.  $dialog = New-Object -ComObject "WIA.CommonDialog" $device = $dialog.ShowSelectDevice() $device.Commands You should see something like this: Now, to take a picture, simply point your camera at something and then execute this command: $device.ExecuteCommand("{AF933CAC-ACAD-11D2-A093-00C04F72DC3C}") .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Imagine my surprise when this actually took a picture (with auto-focus): Imagine what you could do with a camera completely under the control of your computer  Time-lapse photography would be pretty simple, for instance, with a very simple loop that takes a picture and then sleeps for a minute (or whatever time period).  Hooked up to a laptop for portability (and an A/C power supply), this would be pretty trivial to implement.  I may have to give it a shot and report back. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • WPF ListView as a DataGrid – Part 3

    - by psheriff
    I have had a lot of great feedback on the blog post about turning the ListView into a DataGrid by creating GridViewColumn objects on the fly. So, in the last 2 parts, I showed a couple of different methods for accomplishing this. Let’s now look at one more and that is use Reflection to extract the properties from a Product, Customer, or Employee object to create the columns. Yes, Reflection is a slower approach, but you could create the columns one time then cache the View object for re-use. Another potential drawback is you may have columns in your object that you do not wish to display on your ListView. But, just because so many people asked, here is how to accomplish this using Reflection.   Figure 1: Use Reflection to create GridViewColumns. Using Reflection to gather property names is actually quite simple. First you need to pass any type (Product, Customer, Employee, etc.) to a method like I did in my last two blog posts on this subject. Below is the method that I created in the WPFListViewCommon class that now uses reflection. C#public static GridView CreateGridViewColumns(Type anyType){  // Create the GridView  GridView gv = new GridView();  GridViewColumn gvc;   // Get the public properties.  PropertyInfo[] propInfo =          anyType.GetProperties(BindingFlags.Public |                                BindingFlags.Instance);   foreach (PropertyInfo item in propInfo)  {    gvc = new GridViewColumn();    gvc.DisplayMemberBinding = new Binding(item.Name);    gvc.Header = item.Name;    gvc.Width = Double.NaN;    gv.Columns.Add(gvc);  }   return gv;} VB.NETPublic Shared Function CreateGridViewColumns( _  ByVal anyType As Type) As GridView  ' Create the GridView   Dim gv As New GridView()  Dim gvc As GridViewColumn   ' Get the public properties.   Dim propInfo As PropertyInfo() = _    anyType.GetProperties(BindingFlags.Public Or _                          BindingFlags.Instance)   For Each item As PropertyInfo In propInfo    gvc = New GridViewColumn()    gvc.DisplayMemberBinding = New Binding(item.Name)    gvc.Header = item.Name    gvc.Width = [Double].NaN    gv.Columns.Add(gvc)  Next   Return gvEnd Function The key to using Relection is using the GetProperties method on the type you pass in. When you pass in a Product object as Type, you can now use the GetProperties method and specify, via flags, which properties you wish to return. In the code that I wrote, I am just retrieving the Public properties and only those that are Instance properties. I do not want any static/Shared properties or private properties. GetProperties returns an array of PropertyInfo objects. You can loop through this array and build your GridViewColumn objects by reading the Name property from the PropertyInfo object. Build the Product Screen To populate the ListView shown in Figure 1, you might write code like the following: C#private void CollectionSample(){  Product prod = new Product();   // Setup the GridView Columns  lstData.View =      WPFListViewCommon.CreateGridViewColumns(typeOf(Product));  lstData.DataContext = prod.GetProducts();} VB.NETPrivate Sub CollectionSample()  Dim prod As New Product()   ' Setup the GridView Columns  lstData.View = WPFListViewCommon.CreateGridViewColumns( _       GetType(Product))  lstData.DataContext = prod.GetProducts()End Sub All you need to do now is to pass in a Type object from your Product class that you can get by using the typeOf() function in C# or the GetType() function in VB. That’s all there is to it! Summary There are so many different ways to approach the same problem in programming. That is what makes programming so much fun! In this blog post I showed you how to create ListView columns on the fly using Reflection. This gives you a lot of flexibility without having to write extra code as was done previously. NOTE: You can download the complete sample code (in both VB and C#) at my website. http://www.pdsa.com/downloads. Choose Tips & Tricks, then "WPF ListView as a DataGrid – Part 3" from the drop-down. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free eBook on "Fundamentals of N-Tier".  

    Read the article

  • How did my email end up in spam? Spam only filters this specific email, other email contents work

    - by mugetsu
    My website has users buy our products and when the purchase completes, it sends the user an email. However, this email always ends up in spam! When the user first registers, the site also sends an email, this email however is not filtered and goes into the normal inbox. I'm not quite sure why this is so, gmail vaguely tells me that " It's similar to messages that were detected by our spam filters." So I'm thinking that I need to reword the following email better. Can I get some tips? Or could something else be causing this? thanks! here's the unformatted email: Delivered-To: [email protected] Received: by 10.112.32.98 with SMTP id h2csp61953lbi; Tue, 20 Mar 2012 21:09:13 -0700 (PDT) Received: by 10.180.79.72 with SMTP id h8mr22836827wix.1.1332302953175; Tue, 20 Mar 2012 21:09:13 -0700 (PDT) Return-Path: <[email protected]> Received: from mail26.elasticemail.org (mail26.elasticemail.org. [178.32.180.26]) by mx.google.com with SMTP id 6si518487wiz.41.2012.03.20.21.09.12; Tue, 20 Mar 2012 21:09:12 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 178.32.180.26 as permitted sender) client-ip=178.32.180.26; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 178.32.180.26 as permitted sender) [email protected]; dkim=pass [email protected] DKIM-Signature: v=1; a=rsa-sha1; bh=qjc8jxQuGy9pLN1YV9TR2PHQYKg=; c=relaxed/relaxed; d=website.com; s=api; h=DomainKey-Signature:MIME-Version:From:To:List-Unsubscribe:Subject:Date:Reply-To:Message-ID:Content-Type; b=Odt+nYhjntXPl7JPVHeJWjkStemt6so+FPVYY6oMKziMFzmW8YiLhN8WwSLY0faMcn/rirKsO2dOm/kvcHlqUJC7ldhaydE6bPekkBDa9kBovlGwPNm6xy9QWPP9I1fXDLDCwqqeAXv8kN0daXbh3pVyqWNUOk5cgQ35OgpQpKI= DomainKey-Signature: q=dns; a=rsa-sha1; c=simple; d=website.com; s=api; h=MIME-Version:X-Mailer:From:To:X-Priority:List-Unsubscribe:Subject:Date:Reply-To:Message-ID:Content-Type; b=F7NNZIEyEV+64uYD8pVpe91WLP19Tw2Whk4OKpkLeAfkmrNIA7AjP0XYU1JWTlEyibHQJjjbhR62I3MvVJBSGp75eWfOuwb2AqYWZ/jAlMWznnfQLVv7OlYJsErGxYP6GUNNcuJaqlTPFDanJwtaEvR+tqXZRB7xrUisMd8lq2I= MIME-Version: 1.0 X-Mailer: email.website.com From: "Website Contact" <[email protected]> To: [email protected] X-Priority: 3 (Normal) List-Unsubscribe: <http://email.website.com/tracking/unsubscribe?msgid=su6g-8kfd0s0g>, <mailto:[email protected]?subject=unsubscribe> Subject: Website Tickets: event Date: Wed, 21 Mar 2012 04:09:17 +0000 Reply-To: "Website Contact" <[email protected]> Message-ID: <[email protected]> Content-Type: multipart/alternative; boundary="----=_NextPart_000_3F77_7A0DF805.A8C886C0" ------=_NextPart_000_3F77_7A0DF805.A8C886C0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 SGVsbG8hIAoKIEhlcmUgYXJlIHlvdXIgdGlja2V0KHMpIGZvciBDVEFTIGVDc1RBU3kgMjAxMjog CgpodHRwczovL2NhbXB1c2FtcC5jb20vP3RpY2tldHMvNy95aGloZ3Znd3Z3cWR3cXhtdnQKClNp bXBseSBicmluZyBpdCB3aXRoIHlvdSBvbiB5b3VyIHNtYXJ0cGhvbmUsIG9yIHByaW50IHRoZSB0 aWNrZXQgb3V0IHRvIGJlIHNjYW5uZWQgYXQgdGhlIGV2ZW50LiBFbmpveSwgYW5kIHdlIGFwcHJl Y2lhdGUgeW91ciBwdXJjaGFzZS4KClNpbmNlcmVseSwKVGhlIENhbXB1c0FtcCBUZWFt ------=_NextPart_000_3F77_7A0DF805.A8C886C0 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: base64 SGVsbG8hIDxici8+PGJyLz4gSGVyZSBhcmUgeW91ciB0aWNrZXQocykgZm9yIENUQVMgZUNzVEFT eSAyMDEyOjxici8+PGEgaHJlZj0iaHR0cDovL2VtYWlsLmNhbXB1c2FtcC5jb20vdHJhY2tpbmcv Y2xpY2s/bXNnaWQ9c3U2Zy04a2ZkMHMwZyZ0YXJnZXQ9aHR0cHMlM2ElMmYlMmZjYW1wdXNhbXAu Y29tJTJmJTNmdGlja2V0cyUyZjclMmZ5aGloZ3Znd3Z3cWR3cXhtdnQiPiBodHRwczovL2NhbXB1 c2FtcC5jb20vP3RpY2tldHMvNy95aGloZ3Znd3Z3cWR3cXhtdnQgIDwvYT4gPGJyLz48YnIvPlNp bXBseSBicmluZyBpdCB3aXRoIHlvdSBvbiB5b3VyIHNtYXJ0cGhvbmUsIG9yIHByaW50IHRoZSB0 aWNrZXQgb3V0IHRvIGJlIHNjYW5uZWQgYXQgdGhlIGV2ZW50LiBFbmpveSwgYW5kIHdlIGFwcHJl Y2lhdGUgeW91ciBwdXJjaGFzZS48YnIvPjxici8+U2luY2VyZWx5LDxici8+VGhlIENhbXB1c0Ft cCBUZWFtPGltZyBzcmM9Imh0dHA6Ly9lbWFpbC5jYW1wdXNhbXAuY29tL3RyYWNraW5nL29wZW4/ bXNnaWQ9c3U2Zy04a2ZkMHMwZyIgc3R5bGU9IndpZHRoOjFweDtoZWlnaHQ6MXB4IiBhbHQ9IiIg Lz4= ------=_NextPart_000_3F77_7A0DF805.A8C886C0--

    Read the article

  • This Week in Geek History: Gmail Goes Public, Deep Blue Wins at Chess, and the Birth of Thomas Edison

    - by Jason Fitzpatrick
    Every week we bring you a snapshot of the week in Geek History. This week we’re taking a peek at the public release of Gmail, the first time a computer won against a chess champion, and the birth of prolific inventor Thomas Edison. Gmail Goes Public It’s hard to believe that Gmail has only been around for seven years and that for the first three years of its life it was invite only. In 2007 Gmail dropped the invite only requirement (although they would hold onto the “beta” tag for another two years) and opened its doors for anyone to grab a username @gmail. For what seemed like an entire epoch in internet history Gmail had the slickest web-based email around with constant innovations and features rolling out from Gmail Labs. Only in the last year or so have major overhauls at competitors like Hotmail and Yahoo! Mail brought other services up to speed. Can’t stand reading a Week in Geek History entry without a random fact? Here you go: gmail.com was originally owned by the Garfield franchise and ran a service that delivered Garfield comics to your email inbox. No, we’re not kidding. Deep Blue Proves Itself a Chess Master Deep Blue was a super computer constructed by IBM with the sole purpose of winning chess matches. In 2011 with the all seeing eye of Google and the amazing computational abilities of engines like Wolfram Alpha we simply take powerful computers immersed in our daily lives for granted. The 1996 match against reigning world chest champion Garry Kasparov where in Deep Blue held its own, but ultimately lost, in a  4-2 match shook a lot of people up. What did it mean if something that was considered such an elegant and quintessentially human endeavor such as chess was so easy for a machine? A series of upgrades helped Deep Blue outright win a match against Kasparov in 1997 (seen in the photo above). After the win Deep Blue was retired and disassembled. Parts of Deep Blue are housed in the National Museum of History and the Computer History Museum. Birth of Thomas Edison Thomas Alva Edison was one of the most prolific inventors in history and holds an astounding 1,093 US Patents. He is responsible for outright inventing or greatly refining major innovations in the history of world culture including the phonograph, the movie camera, the carbon microphone used in nearly every telephone well into the 1980s, batteries for electric cars (a notion we’d take over a century to take seriously), voting machines, and of course his enormous contribution to electric distribution systems. Despite the role of scientist and inventor being largely unglamorous, Thomas Edison and his tumultuous relationship with fellow inventor Nikola Tesla have been fodder for everything from books, to comics, to movies, and video games. Other Notable Moments from This Week in Geek History Although we only shine the spotlight on three interesting facts a week in our Geek History column, that doesn’t mean we don’t have space to highlight a few more in passing. This week in Geek History: 1971 – Apollo 14 returns to Earth after third Lunar mission. 1974 – Birth of Robot Chicken creator Seth Green. 1986 – Death of Dune creator Frank Herbert. Goodnight Dune. 1997 – Simpsons becomes longest running animated show on television. Have an interesting bit of geek trivia to share? Shoot us an email to [email protected] with “history” in the subject line and we’ll be sure to add it to our list of trivia. Latest Features How-To Geek ETC Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines RGB? CMYK? Alpha? What Are Image Channels and What Do They Mean? Clean Up Google Calendar’s Interface in Chrome and Iron The Rise and Fall of Kramerica? [Seinfeld Video] GNOME Shell 3 Live CDs for OpenSUSE and Fedora Available for Testing Picplz Offers Special FX, Sharing, and Backup of Your Smartphone Pics BUILD! An Epic LEGO Stop Motion Film [VIDEO] The Lingering Glow of Sunset over a Winter Landscape Wallpaper

    Read the article

  • SQL Developer at Oracle Open World 2012

    - by thatjeffsmith
    We have a lot going on in San Francisco this fall. One of the most personal exciting bits, for what will be my 4th or 5th Open World, is that this will be my FIRST as a member of Team Oracle. I’ve presented once before, but most years it was just me pressing flesh at the vendor booths. After 3-4 days of standing and talking, you’re ready to just go home and not do anything for a few weeks. This time I’ll have a chance to walk around and talk with our users and get a good idea of what’s working and what’s not. Of course it will be a great opportunity for you to find us and get to know your SQL Developer team! 3.4 miles across and back – thanks Ashley for signing me up for the run! This year is going to be a bit crazy. Work wise I’ll be presenting twice, working a booth, and proctoring several of our Hands-On Labs. The fun parts will be equally crazy though – running across the Bay Bridge (I don’t run), swimming the Bay (I don’t swim), having my wife fly out on Wednesday for the concert, and then our first WhiskyFest on Friday (I do drink whisky though.) But back to work – let’s talk about EVERYTHING you can expect from the SQL Developer team. Booth Hours We’ll have 2 ‘demo pods’ in the Exhibition Hall over at Moscone South. Look for the farm of Oracle booths, we’ll be there under the signs that say ‘SQL Developer.’ There will be several people on hand, mostly developers (yes, they still count as people), who can answer your questions or demo the latest features. Come by and say ‘Hi!’, and let us know what you like and what you think we can do better. Seriously. Monday 10AM – 6PM Tuesday 9:45AM – 6PM Wednesday 9:45AM – 4PM Presentations Stop by for an hour, pull up a chair, sit back and soak in all the SQL Developer goodness. You’ll only have to suffer my bad jokes for two of the presentations, so please at least try to come to the other ones. We’ll be talking about data modeling, migrations, source control, and new features in versions 3.1 and 3.2 of SQL Developer and SQL Developer Data Modeler. Day Time Event Monday 10:454:45 What’s New in SQL Developer Why Move to Oracle Application Express Listener Tueday 10:1511:455:00 Using Subversion in Oracle SQL Developer Data Modeler Oracle SQL Developer Tips & Tricks Database Design with Oracle SQL Developer Data Modeler Wednesday 11:453:30 Migrating Third-Party Databases and Applications to Oracle Exadata 11g Enterprise Options and Management Packs for Developers Hands On Labs (HOLs) The Hands On Labs allow you to come into a classroom environment, sit down at a computer, and run through some exercises. We’ll provide the hardware, software, and training materials. It’s self-paced, but we’ll have several helpers walking around to answer questions and chat up any SQL Developer or database topic that comes to mind. If your employer is sending you to Open World for all that great training, the HOLs are a great opportunity to capitalize on that. They are only 60 minutes each, so you don’t have to worry about burning out. And there’s no homework! Of course, if you do want to take the labs home with you, many are already available via the Developer Day Hands-On Database Applications Developer Lab. You will need your own computer for those, but we’ll take care of the rest. Wednesday PL/SQL Development and Unit Testing with Oracle SQL Developer 10:15 Performance Tuning with Oracle SQL Developer 11:45 Thursday The Soup to Nuts of Data Modeling with Oracle SQL Developer Data Modeler 11:15 Some Parting Advice Always wanted to meet your favorite Oracle authors, speakers, and thought-leaders? Don’t be shy, walk right up to them and introduce yourself. Normal social rules still apply, but at the conference everyone is open and up for meeting and talking with attendees. Just understand if there’s a line that you might only get a minute or two. It’s a LONG conference though, so you’ll have plenty of time to catch up with everyone. If you’re going to be around on Tuesday evening, head on over to the OTN Lounge from 4:30 to 6:30 and hang out for our Tweet Meet. That’s right, all the Oracle nerds on Twitter will be there in one place. Be sure to put your Twitter handle on your name tag so we know who you are!

    Read the article

  • 8 Things You Can Do In Android’s Developer Options

    - by Chris Hoffman
    The Developer Options menu in Android is a hidden menu with a variety of advanced options. These options are intended for developers, but many of them will be interesting to geeks. You’ll have to perform a secret handshake to enable the Developer Options menu in the Settings screen, as it’s hidden from Android users by default. Follow the simple steps to quickly enable Developer Options. Enable USB Debugging “USB debugging” sounds like an option only an Android developer would need, but it’s probably the most widely used hidden option in Android. USB debugging allows applications on your computer to interface with your Android phone over the USB connection. This is required for a variety of advanced tricks, including rooting an Android phone, unlocking it, installing a custom ROM, or even using a desktop program that captures screenshots of your Android device’s screen. You can also use ADB commands to push and pull files between your device and your computer or create and restore complete local backups of your Android device without rooting. USB debugging can be a security concern, as it gives computers you plug your device into access to your phone. You could plug your device into a malicious USB charging port, which would try to compromise you. That’s why Android forces you to agree to a prompt every time you plug your device into a new computer with USB debugging enabled. Set a Desktop Backup Password If you use the above ADB trick to create local backups of your Android device over USB, you can protect them with a password with the Set a desktop backup password option here. This password encrypts your backups to secure them, so you won’t be able to access them if you forget the password. Disable or Speed Up Animations When you move between apps and screens in Android, you’re spending some of that time looking at animations and waiting for them to go away. You can disable these animations entirely by changing the Window animation scale, Transition animation scale, and Animator duration scale options here. If you like animations but just wish they were faster, you can speed them up. On a fast phone or tablet, this can make switching between apps nearly instant. If you thought your Android phone was speedy before, just try disabling animations and you’ll be surprised how much faster it can seem. Force-Enable FXAA For OpenGL Games If you have a high-end phone or tablet with great graphics performance and you play 3D games on it, there’s a way to make those games look even better. Just go to the Developer Options screen and enable the Force 4x MSAA option. This will force Android to use 4x multisample anti-aliasing in OpenGL ES 2.0 games and other apps. This requires more graphics power and will probably drain your battery a bit faster, but it will improve image quality in some games. This is a bit like force-enabling antialiasing using the NVIDIA Control Panel on a Windows gaming PC. See How Bad Task Killers Are We’ve written before about how task killers are worse than useless on Android. If you use a task killer, you’re just slowing down your system by throwing out cached data and forcing Android to load apps from system storage whenever you open them again. Don’t believe us? Enable the Don’t keep activities option on the Developer options screen and Android will force-close every app you use as soon as you exit it. Enable this app and use your phone normally for a few minutes — you’ll see just how harmful throwing out all that cached data is and how much it will slow down your phone. Don’t actually use this option unless you want to see how bad it is! It will make your phone perform much more slowly — there’s a reason Google has hidden these options away from average users who might accidentally change them. Fake Your GPS Location The Allow mock locations option allows you to set fake GPS locations, tricking Android into thinking you’re at a location where you actually aren’t. Use this option along with an app like Fake GPS location and you can trick your Android device and the apps running on it into thinking you’re at locations where you actually aren’t. How would this be useful? Well, you could fake a GPS check-in at a location without actually going there or confuse your friends in a location-tracking app by seemingly teleporting around the world. Stay Awake While Charging You can use Android’s Daydream Mode to display certain apps while charging your device. If you want to force Android to display a standard Android app that hasn’t been designed for Daydream Mode, you can enable the Stay awake option here. Android will keep your device’s screen on while charging and won’t turn it off. It’s like Daydream Mode, but can support any app and allows users to interact with them. Show Always-On-Top CPU Usage You can view CPU usage data by toggling the Show CPU usage option to On. This information will appear on top of whatever app you’re using. If you’re a Linux user, the three numbers on top probably look familiar — they represent the system load average. From left to right, the numbers represent your system load over the last one, five, and fifteen minutes. This isn’t the kind of thing you’d want enabled most of the time, but it can save you from having to install third-party floating CPU apps if you want to see CPU usage information for some reason. Most of the other options here will only be useful to developers debugging their Android apps. You shouldn’t start changing options you don’t understand. If you want to undo any of these changes, you can quickly erase all your custom options by sliding the switch at the top of the screen to Off.     

    Read the article

  • Silverlight Cream for April 29, 2010 -- #851

    - by Dave Campbell
    In this Issue: Carlos Figueira(-2-), Subodh Pushpak, Gergely Orosz, John Papa, Mike Snow(-2-), Rishi, Tim Heuer, Stefan Olson, and David Anson. Shoutouts: Josh Holmes blogged about a cool app the City of Miami has up: Miami 311: Built on Windows Azure Gergely Orosz reports on the state of a bug he found pre SL4: Silverlight 4 still displays large elements incorrectly Laura Foy and Charlie Kindel discuss WP7 on Channel 9: Windows Phone 7 Developer Tools Refresh Announced Charlie Kindel has an announcement, good instructions, and what's new notes on the Windows Phone Developer Tools CTP Refresh! Tim Heuer mentioned the workaround for this in his post (below), but I thought you might like to read Brandon Watson's debrief of what it's all about: Signed Assemblies Bug in the Windows Phone Tools CTP Refresh Laurent Bugnion posted about interrelations between versions of Blend and WP7 code... read it closely: Be careful when installing the Blend Windows Phone 7 Add-In From SilverlightCream.com: Consuming REST/POX services in Silverlight 4 Carlos Figueira has a pair of posts up about consuming services in Silverlight 4. This first one is about consuming REST/POX services. He provides a Service Contract that can be used with either and the full project code is available as well. Consuming REST/JSON services in Silverlight 4 In the second post, Carlos Figueira provides the code to allow WCF and Silverlight 4 to consume strongly-typed REST/JSON... and again, all the code is available. Silverlight and WCF caching Subodh Pushpak has a post up discussing caching in WCF, and has code demonstrating turning caching on at run-time. Detecting Silverlight Version Installed Gergely Orosz said it right when he said "Detecting the Silverlight version installed on a client machine isn’t entirely straightforward." ... and after reading this post, if you take the link to his ScottLogic blog, you'll get a full break-out of how it's done. Silverlight TV 22: Tim Heuer on Extending the SMF It's Thursday, and that means Silverlight TV! ... this week, John Papa has on Tim Heuer who has always been out there pushing media... and he's talking about SMF or Silverlight Media Framework for the uninitiated, and also extending it. Silverlight Tip of the Day #7 – Localized Resources Mike Snow has Tip Number 7 up and it's about localization... good end-to-end discussion and demonstration. Just thought I should use that to prove to my daughter that the tatoo she had put on the back of her neck actually reads "Eat More Broccoli" :) Silverlight Tip of the Day #8 – Detecting Alt, Shift, Control, Window & Apple Keys Combinations I just realized Mike Snow's site logo reads "Silverlight Tips of the Day" (bolding mine) ... that answers why I'm seeing more than one -- sorry Mike, couldn't pass it up :) ... Mike's second tip today and number 8 in the series is on detecting all the mouse button and ctl/alt/shift combinations in Silverlight. nRoute: More Wholesomeness, with SL 4 and .NET 4.0 Rishi has a post up announcing a new nRoute release for Silverlight 4 and .NET 4.0 He's tweaked the code to take advantages of enhancements in the new platforms, so check it out. Windows Phone 7 Developer Tools April 2010 Refresh Booya... Tim Heuer announced the release of the next drop in the WP7 tools ... dang wish I was at home today :) ... be sure to read the post for info such as the notes about Authenticode Assemblies and the release notes. Updates to Silverlight Multi-binding support Stefan Olson points up a SL4 change to Multi-binding support that he had previously blogged about. He shows the previous non-working example, and what you have to do to make it work now. Using XAML to create a custom wallpaper image for your mobile device David Anson has a solution for those pesky lost devices, and let me go on the record right now saying if anyone finds a WP7 phone laying around, just call me, it's mine :) [think that'd work??] ... ok, David's solution is a WPF app "MobileDeviceHomeScreenMaker" that you get the info set and it produces a png you then put on your device. But seriously about that lost phone... Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • How to Use An Antivirus Boot Disc or USB Drive to Ensure Your Computer is Clean

    - by Chris Hoffman
    If your computer is infected with malware, running an antivirus within Windows may not be enough to remove it. If your computer has a rootkit, the malware may be able to hide itself from your antivirus software. This is where bootable antivirus solutions come in. They can clean malware from outside the infected Windows system, so the malware won’t be running and interfering with the clean-up process. The Problem With Cleaning Up Malware From Within Windows Standard antivirus software runs within Windows. If your computer is infected with malware, the antivirus software will have to do battle with the malware. Antivirus software will try to stop the malware and remove it, while the malware will attempt to defend itself and shut down the antivirus. For really nasty malware, your antivirus software may not be able to fully remove it from within Windows. Rootkits, a type of malware that hides itself, can be even trickier. A rootkit could load at boot time before other Windows components and prevent Windows from seeing it, hide its processes from the task manager, and even trick antivirus applications into believing that the rootkit isn’t running. The problem here is that the malware and antivirus are both running on the computer at the same time. The antivirus is attempting to fight the malware on its home turf — the malware can put up a fight. Why You Should Use an Antivirus Boot Disc Antivirus boot discs deal with this by approaching the malware from outside Windows. You boot your computer from a CD or USB drive containing the antivirus and it loads a specialized operating system from the disc. Even if your Windows installation is completely infected with malware, the special operating system won’t have any malware running within it. This means the antivirus program can work on the Windows installation from outside it. The malware won’t be running while the antivirus tries to remove it, so the antivirus can methodically locate and remove the harmful software without it interfering. Any rootkits won’t be able to set up the tricks they use at Windows boot time to hide themselves from the rest o the operating system. The antivirus will be able to see the rootkits and remove them. These tools are often referred to as “rescue disks.” They’re meant to be used when you need to rescue a hopelessly infected system. Bootable Antivirus Options As with any type of antivirus software, you have quite a few options. Many antivirus companies offer bootable antivirus systems based on their antivirus software. These tools are generally free, even when they’re offered by companies that specialized in paid antivirus solutions. Here are a few good options: avast! Rescue Disk – We like avast! for offering a capable free antivirus with good detection rates in independent tests. avast! now offers the ability to create an antivirus boot disc or USB drive. Just navigate to the Tools -> Rescue Disk option in the avast! desktop application to create bootable media. BitDefender Rescue CD – BitDefender always seems to receive good scores in independent tests, and the BitDefender Rescue CD offers the same antivirus engine in the form of a bootable disc. Kaspersky Rescue Disk – Kaspersky also receives good scores in independent tests and offers its own antivirus boot disc. These are just a handful of options. If you prefer another antivirus for some reason — Comodo, Norton, Avira, ESET, or almost any other antivirus product — you’ll probably find that it offers its own system rescue disk. How to Use an Antivirus Boot Disc Using an antivirus boot disc or USB drive is actually pretty simple. You’ll just need to find the antivirus boot disc you want to use and burn it to disc or install it on a USB drive. You can do this part on any computer, so you can create antivirus boot media on a clean computer and then take it to an infected computer. Insert the boot media into the infected computer and then reboot. The computer should boot from the removable media and load the secure antivirus environment. (If it doesn’t, you may need to change the boot order in your BIOS or UEFI firmware.) You can then follow the instructions on your screen to scan your Windows system for malware and remove it. No malware will be running in the background while you do this. Antivirus boot discs are useful because they allow you to detect and clean malware infections from outside an infected operating system. If the operating system is severely infected, it may not be possible to remove — or even detect — all the malware from within it. Image Credit: aussiegall on Flickr     

    Read the article

  • Don’t miss this very popular presentation on Punchout in iProcurement on June 26th 2012

    - by user793553
    Don’t miss this very popular presentation on Punchout in iProcurement on June 26th.  See Doc ID 1448447.1 for the Webcast details. ADVISOR WEBCAST: Punchout in iProcurement PRODUCT FAMILY: EBZs- Procurement   June 26, 2012 at 14:00 UK / 15:00 Cairo / 6:00 am Pacific / 7:00 am Mountain / 9:00 am Eastern This one-hour session is recommended for technical and functional users who are maintaining and/or implementing the Punchout from iProcurement. The session will provide an overview of the different Punchout model, setup, and the Punchout to PO xml/cxml cycle. Also, it will provide tips in troubleshooting the common issues when new supplier is added to Punchout or the existing one stops working. TOPICS WILL INCLUDE: Overview of the Punchout Models. Provide the knowledge in the Punchout to PO Process cycle. Demo - Punchout. Certificates and setup. Learn the common issues and how to address in an efficient way. (Documentation and Notes) A short, live demonstration (only if applicable) and question and answer period will be included. Oracle Advisor Webcasts are dedicated to building your awareness around our products and services. This session does not replace offerings from Oracle Global Support Services. Current Schedule can be found on Note 740966.1 Post Presentation Recordings can be found on Note 740964.1 WebEx Conference Details Topic: Advisor Webcast - Punchout in iProcuremen Date and Time: Tuesday, June 26, 2012 3:00 pm, Egypt Time (Cairo, GMT+02:00) Tuesday, June 26, 2012 2:00 pm, GMT Summer Time (London, GMT+01:00) Tuesday, June 26, 2012 9:00 am, Eastern Daylight Time (New York, GMT-04:00) Tuesday, June 26, 2012 7:00 am, Mountain Daylight Time (Denver, GMT-06:00) Event number: 597 373 155 -------------------------------------------------------  To register for this meeting  -------------------------------------------------------  1. Event address for attendees: https://oracleaw.webex.com/oracleaw/onstage/g.php?d=597373155&t=a 2. Register for the meeting.  Once the host approves your request, you will receive a confirmation email with instructions for joining the meeting. InterCall Audio Instructions A list of Toll-Free Numbers can be found below. VOICESTREAMING IS AVAILABLE teleconference ID: 70528713 UK standard International:+44 1452 562 665 US Free Call: 1866 230 1938 US Local call: 1845 608 8023 Global Toll-Free Numbers MOS doc#:  https://metalink3.oracle.com/od/faces/secure/km/DocumentDisplay.jspx?id=1148600.1 Designation Number Argentina Free Call 0800 444 1009 Australia Free Call 1800 763 650 Austria Free Call 0800 111 956 Austria Local Call 0192 865 72 Belgium Free Call 0800 724 46 Belgium Local Call 0817 000 60 Brazil Free Call 0800 761 0835 Bulgaria Free Call 0080 011 511 76 Canada Free Call 1866 984 6577 Columbia Free Call 0180 091 562 17 Croatia Free Call 0800 222 305 Cyprus Free Call 8009 6341 Czech Republic Free Call 8007 007 95 Denmark Free Call 8088 8467 Denmark Local Call 3272 7506 Finland Free Call 0800 112 398 Finland Local Call 0923 114 014 France Free Call 0805 110 463 France Local Call 0359 580 290 Germany Free Call 0800 101 4918 Germany Local Call 0692 222 161 19 Greece Free Call 0080 012 8135 Hong Kong Free Call 8009 661 55 Hungary Free Call 0680 018 839 Hungary Local Call 0180 889 97 India Free Call 0008 001 006 600 Ireland Free Call 1800 300 170 Ireland Local Call 0143 198 35 Israel Free Call 1809 431 440 Italy Free Call 8007 840 87 Italy Local Call 0236 009 700 Japan Free Call 0066 338 124 31 Latvia Free Call 8000 3680 Luxembourg Free Call 8002 7941 Malaysia Free Call 1800 814 528 Mexico Free Call 0018 666 864 905 Monaco Free Call 8009 3655 Netherlands Free Call 0800 949 4596 Netherlands Local Call 0207 168 000 New Zealand Free Call 0800 451 190 North China Free Call 1080 074 413 29 Norway Free Call 8001 8057 Norway Local Call 2151 0847 Poland Free Call 0080 012 135 73 Portugal Free Call 8007 894 20 Romania Free Call 0800 895 558 Russia Free Call 8108 002 385 2044 Slovenia Free Call 0800 804 55 South Africa Free Call 0800 982 794 South China Free Call 1080 044 111 82 South Korea Free Call 0079 814 800 7887 Spain Free Call 9009 389 85 Spain Local Call 9111 421 10 Sweden Free Call 0200 214 344 Sweden Local Call 0850 596 375 Switzerland Free Call 0800 835 040 Switzerland Local Call 0445 804 280 Thailand Free Call 0018 004 421 98 UK Free Call 0800 073 1830 UK Local Call 0844 871 9364 UK National Call 0871 700 0309 UK Standard International +44 (0) 1452 562 665 USA Free Call 1866 230 1938   Back to the top   Copyright? 2010, Oracle. All rights reserved. Contact Us | Legal Notices and Terms of Use | Privacy Statement

    Read the article

  • Silverlight Cream for March 26, 2010 -- #821

    - by Dave Campbell
    In this Issue: Max Paulousky, Christian Schormann, John Papa, Phani Raj, David Anson(-2-, -3-), Brad Abrams(-2-), and Jeff Wilcox(-2-, -3-). Shoutouts: Jeff Wilcox posted his material from mix and some preview TestFramework bits: Unit Testing Silverlight & Windows Phone Applications – talk now online At MIX10, Jeff Wilcox demo'd an app called "Peppermint"... here's the bleeding edge demo: “Peppermint” MIX demo sources Erik Mork and Co. have put out their weekly This Week In Silverlight 3.25.2010 Brad Abrams has all his materials posted for his MIX10 session Mix2010: Search Engine Optimization (SEO) for Microsoft Silverlight... including play-by-play of the demo and all source. Do you use Rooler? Well you should! Watch a video Pete Brown did with Pete Blois on Expression Blend, Windows Phone, Rooler Interested in Silverlight and XNA for WP7? Me too! Michael Klucher has a post outlining the two: Silverlight and XNA Framework Game Development and Compatibility From SilverlightCream.com: Modularity in Silverlight Applications - An Issue With ModuleInitializeException Max Paulousky has a truly ugly error trace listed by way of not having a reference listed, and the obvious simple solution. Next time he'll talk about the difficult situations. Using SketchFlow to Prototype for Windows Phone Christian Schormann has a tutorial up on using Expression Blend to develop for WP7 ... who better than Christian for that task?? Silverlight TV 18: WCF RIA Services Validation John Papa held forth with Nikhil Kothari on WCF RIA Services and validation just prior to MIX10, and was posted yesterday. Building SL3 applications using OData client Library with Vs 2010 RC Phani Raj walks through building an OData consumer in SL3, the first problem you're going to hit, and the easy solution to it. Tip: When creating a DependencyProperty, follow the handy convention of "wrapper+register+static+virtual" David Anson has a couple more of his 'Tips' up... this first is about Dependency Properties again... having a good foundation for all your Dependency Properties is a great way to avoid problems. Tip: Do not assign DependencyProperty values in a constructor; it prevents users from overriding them In the next post, David Anson talks about not assigning Dependency Property values in a constructor and gives one of the two ways to get around doing so. Tip: Set DependencyProperty default values in a class's default style if it's more convenient In his latest post, David Anson gives the second way to avoid setting a Dependency Property value in the constructor. Silverlight 4 + RIA Services - Ready for Business: Search Engine Optimization (SEO) Brad Abrams Abrams adds SEO to the tutorial series he's doing. He begins with his PDC09 session material on the subject and then takes off on a great detailed tutorial all with source. Silverlight 4 + RIA Services - Ready for Business: Localizing Business Application Brad Abrams then discusses localization and Silverlight in another detailed tutorial with all code included. Silverlight Toolkit and the Windows Phone: WrapPanel, and a few others Jeff Wilcox has a few WP7 posts I'm going to push today. This first is from earlier this week and is about using the Toolkit in WP7 and better than that, he includes the bits you need if all you want is the WrapPanel Data binding user settings in Windows Phone applications In the next one from yesterday, Jeff Wilcox demonstrates saving some user info in Isolated Storage to improve the user experience, and shares all the necessary plumbing files, and other external links as well. Displaying 2D QR barcodes in Windows Phone applications In a post from today, Jeff Wilcox ported his Silverlight 2D QR Barcode app from last year into WP7 ... just very cool... get the source and display your Microsoft Tag. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone    MIX10

    Read the article

  • How to Access a Windows Desktop From Your Tablet or Phone

    - by Chris Hoffman
    iPads and Android tablets can’t run Windows apps locally, but they can access a Windows desktops remotely — even with a physical keyboard. In a pinch, the same tricks can be used to access a Windows desktop from a smartphone. Microsoft recently launched their own official Remote Desktop app for iOS and Android devices. Microsoft’s official apps are primarily useful for businesses — if you’re a typical home user, you’ll want to use a different remote desktop solution. Microsoft’s Remote Desktop App Microsoft now offers official Remote Desktop apps for iPad and iPhone as well as Android tablets and smartphones. The apps use Microsoft’s RDP protocol to connect to remote Windows systems. They’re essentially just new clients for the Remote Desktop feature that has been included in Windows for more than a decade. There are big problems with these apps if you’re an average home user. Microsoft’s Remote Desktop server is not available on standard or Home versions of Windows, only Professional and Enterprise editions. If you do have the appropriate edition of Windows, you’ll have to set up port-forwarding and a dynamic DNS service if you want to access your Windows desktop from outside your local network. You could also set up a VPN — either way you’ll need to do some footwork. This app is a gift to businesses who are already using Remote Desktop and enthusiasts who have the more expensive versions of Windows and don’t mind the configuration process. To set this up, follow our guide to setting up Remote Desktop for Internet access and connect using the Remote Desktop app instead of traditional Remote Desktop clients. TeamViewer If you have the standard edition of Windows or you just don’t want to mess around with port-forwarding and dynamic DNS configuration, you’ll want to skip Remote Desktop and use something else. We like TeamViewer for this. Just as it’s a great way to remotely troubleshoot your relatives’ computers, it’s also a great way to remotely access your own computer. It doesn’t have the same limitations Microsoft’s Remote Desktop system has — it’s completely free for personal use, runs on any edition of Windows, and is easy to set up. There’s no messing around with port-forwarding or dynamic DNS configuration. To get started, just download and run the TeamViewer program on your computer. You can get started with it immediately, but you’ll want to set up unattended access to connect remotely without using the codes displayed on your screen. To connect, just install the TeamViewer mobile app and log in with the details the TeamViewer window displays. TeamViewer also offers software that runs on Mac and Linux, so you can remote-control other types of computers from your tablet. Other Options Microsoft’s Remote Desktop app and TeamViewer aren’t the only options, of course. There are a variety of different apps and services built for this. Splashtop is another fairly popular remote desktop solution that some people report as being faster. Unfortunately, it’s not entirely free — the iPad and iPhone app costs $20 at regular price. To use it over the Internet, you’ll have to purchase an additional “Anywhere Access Pack.” If you’re frustrated with TeamViewer’s speed and you don’t mind spending money, you may want to try Splashtop instead. As always, you could use any VNC server along with a VNC client app. VNC is the do-it-yourself solution — it’s an open protocol. Unlike Microsoft’s RDP protocol, you can install a VNC server of your own, configure it how you like, and use any mobile VNC client app. This is more flexible because you can install a VNC server on any edition of Windows or even non-Windows operating systems, but it otherwise has all the same issues — you have to worry about port-forwarding, setting up dynamic DNS, and securing your VNC server. Keep an eye on Chrome Remote Desktop. Chrome already offers a built-in remote desktop feature that allows you to remotely control your PC from another Windows, Mac, Linux, or Chrome OS device. Google is rumored to be building an Android app for Chrome Remote Desktop, which would allow you to easily access a computer running Chrome from Android tablets. Google’s solution is much more user-friendly for average people than Microsoft’s Remote Desktop solution, which is clearly geared towards businesses. Chrome Remote Desktop just requires signing in with a Google account. Remote desktop solutions like Microsoft’s Remote Desktop app and TeamViewer are also available for Windows tablets. On Windows RT devices like the Surface RT and Surface 2, they allow you to use the full Windows desktop that’s unavailable on your tablet.     

    Read the article

  • Silverlight Cream for March 25, 2010 -- #820

    - by Dave Campbell
    In this Issue: René Schulte, Jeremy Likness, Hassan, Victor Gaudioso, SilverLaw, Mike Taulty, Phani Raj, Tim Heuer, Christian Schormann, Brad Abrams, David Anson, Diptimaya Patra, and Daniel Vaughan. Shoutouts: Last week, Koen Zwikstra announced Silverlight Spy at MIX10 Anand Iyer announced this for students on the Windows Team Blog: Be a Windows Phone 7 “Rockstar” Justin Angel blogged that Silverlight Isn't Fully Cross-Platform ... let him know if you think it's a yawn or important. On behalf of SilverlightShow, Cigdem Patlak posted MIX10: Laurent Bugnion on Silverlight adoption, WP7 and the EcoContest From SilverlightCream.com: Coding4Fun - Silverlight Real Time Face Detection René Schulte has a Coding 4 Fun article posted on facial recognition. Who better to be manipulating graphics like this than René? Sequential Asynchronous Workflows Part 2: Simplified Jeremy Likness follows up his previous post with another one that is 'simplified'. Remember his previous post began with a post on the Silverlight.net forum and Rob Eisenburg's MVVM presentation from MIX10 Windows Phone 7 Video Tutorial Hassan has a new video up on his AfricanGeek site, and that's a continuation of his previous WP7 video tutorial, adding a listbox and databinding it to the selected index of another listbox. The Los Angeles Silverlight Usergorup will be Streaming its March Meeting LIVE in Silverlight – Tonight! Victor Gaudioso used his Live Streaming knowledge to stream his User Group meeting last night from LA where Michael Washington presented on MVVM followed by Victor himself. That was last night. Today he has a couple of the videos up to view. Shining 3D Font Design - Silverlight 3 SilverLaw has a "Shining 3D Font" tutorial up, and a video on it here: New Video: How to create a 3D effect on a Silverlight 3 Textblock ... this is also available in the Expression Gallery. Silverlight 4 RC – Signing trusted apps with home made certificates Mike Taulty has a post up about building a hand-rolled cert to test out the XAP signing features, and then gives a nod to John Papa with a link to the Silverlight White Paper I've posted about before, because this info is in there as well. Developing a Windows Phone 7 Application that consumes OData Phani Raj has a tutorial up on consuming the NetFlix OData catalog on the WP7 emulator ... now *that* is cool! Make your Silverlight applications Speak to you with Microsoft Translator Tim Heuer used Silverlight to demonstrate Microsoft Translator as a speech synthesis tool using the Speak API included ... pretty cool, Tim ... lots of external links and code. Blend 4: About Path Layout, Sidebar – More About ListBox Than You Ever Wanted To Know Christian Schormann has another outstanding tutorial up on the ListBox and PathLayout in Expression Blend ... just check out the screen shots and you'll wanna read it! Silverlight 4 + RIA Services: Ready for Business: Updating Data in the Client This is the continuation of Brad Abrams' series on WCF RIA Services and is a tutorial on setting up to deal with updating the data. Tip: The CLR wrapper for a DependencyProperty should do its job and nothing more David Anson is posting some "Development Tips", and this is the first ... discussing making sure your DependencyProperty CLR wrapper stays on point... Create and Apply Theme Silverlight Application Diptimaya Patra has a tutorial up on creating and using themes. He states that "Themes are nothing but some predefined styles" ... check it out and see if it's really that easy :) Building a Windows Phone 7 Puzzle Game Daniel Vaughan has a great post up starting with installing all the tools and ending with a maze game for WP7 using XNA for sound... this is the first I've seen that integrates XNA (I think). Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone    MIX10

    Read the article

  • MongoDB usage best practices

    - by andresv
    The project I'm working on uses MongoDB for some stuff so I'm creating some documents to help developers speedup the learning curve and also avoid mistakes and help them write clean & reliable code. This is my first version of it, so I'm pretty sure I will be adding more stuff to it, so stay tuned! C# Official driver notes The 10gen official MongoDB driver should always be referenced in projects by using NUGET. Do not manually download and reference assemblies in any project. C# driver quickstart guide: http://www.mongodb.org/display/DOCS/CSharp+Driver+Quickstart Reference links C# Language Center: http://www.mongodb.org/display/DOCS/CSharp+Language+Center MongoDB Server Documentation: http://www.mongodb.org/display/DOCS/Home MongoDB Server Downloads: http://www.mongodb.org/downloads MongoDB client drivers download: http://www.mongodb.org/display/DOCS/Drivers MongoDB Community content: http://www.mongodb.org/display/DOCS/CSharp+Community+Projects Tutorials Tutorial MongoDB con ASP.NET MVC - Ejemplo Práctico (Spanish):http://geeks.ms/blogs/gperez/archive/2011/12/02/tutorial-mongodb-con-asp-net-mvc-ejemplo-pr-225-ctico.aspx MongoDB and C#:http://www.codeproject.com/Articles/87757/MongoDB-and-C C# driver LINQ tutorial:http://www.mongodb.org/display/DOCS/CSharp+Driver+LINQ+Tutorial C# driver reference: http://www.mongodb.org/display/DOCS/CSharp+Driver+Tutorial Safe Mode Connection The C# driver supports two connection modes: safe and unsafe. Safe connection mode (only applies to methods that modify data in a database like Inserts, Deletes and Updates. While the current driver defaults to unsafe mode (safeMode == false) it's recommended to always enable safe mode, and force unsafe mode on specific things we know aren't critical. When safe mode is enabled, the driver internal code calls the MongoDB "getLastError" function to ensure the last operation is completed before returning control the the caller. For more information on using safe mode and their implicancies on performance and data reliability see: http://www.mongodb.org/display/DOCS/getLastError+Command If safe mode is not enabled, all data modification calls to the database are executed asynchronously (fire & forget) without waiting for the result of the operation. This mode could be useful for creating / updating non-critical data like performance counters, usage logging and so on. It's important to know that not using safe mode implies that data loss can occur without any notification to the caller. As with any wait operation, enabling safe mode also implies dealing with timeouts. For more information about C# driver safe mode configuration see: http://www.mongodb.org/display/DOCS/CSharp+getLastError+and+SafeMode The safe mode configuration can be specified at different levels: Connection string: mongodb://hostname/?safe=true Database: when obtaining a database instance using the server.GetDatabase(name, safeMode) method Collection: when obtaining a collection instance using the database.GetCollection(name, safeMode) method Operation: for example, when executing the collection.Insert(document, safeMode) method Some useful SafeMode article: http://stackoverflow.com/questions/4604868/mongodb-c-sharp-safemode-official-driver Exception Handling The driver ensures that an exception will be thrown in case of something going wrong, in case of using safe mode (as said above, when not using safe mode no exception will be thrown no matter what the outcome of the operation is). As explained here https://groups.google.com/forum/?fromgroups#!topic/mongodb-user/mS6jIq5FUiM there is no need to check for any returned value from a driver method inserting data. With updates the situation is similar to any other relational database: if an update command doesn't affect any records, the call will suceed anyway (no exception thrown) and you manually have to check for something like "records affected". For MongoDB, an Update operation will return an instance of the "SafeModeResult" class, and you can verify the "DocumentsAffected" property to ensure the intended document was indeed updated. Note: Please remember that an Update method might return a null instance instead of an "SafeModeResult" instance when safe mode is not enabled. Useful Community Articles Comments about how MongoDB works and how that might affect your application: http://ethangunderson.com/blog/two-reasons-to-not-use-mongodb/ FourSquare using MongoDB had serious scalability problems: http://mashable.com/2010/10/07/mongodb-foursquare/ Is MongoDB a replacement for Memcached? http://www.quora.com/Is-MongoDB-a-good-replacement-for-Memcached/answer/Rick-Branson MongoDB Introduction, shell, when not to use, maintenance, upgrade, backups, memory, sharding, etc: http://www.markus-gattol.name/ws/mongodb.html MongoDB Collection level locking support: https://jira.mongodb.org/browse/SERVER-1240 MongoDB performance tips: http://www.quora.com/MongoDB/What-are-some-best-practices-for-optimal-performance-of-MongoDB-particularly-for-queries-that-involve-multiple-documents Lessons learned migrating from SQL Server to MongoDB: http://www.wireclub.com/development/TqnkQwQ8CxUYTVT90/read MongoDB replication performance: http://benshepheard.blogspot.com.ar/2011/01/mongodb-replication-performance.html

    Read the article

  • Clean up after Visual Studio

    - by psheriff
    As programmer’s we know that if we create a temporary file during the running of our application we need to make sure it is removed when the application or process is complete. We do this, but why can’t Microsoft do it? Visual Studio leaves tons of temporary files all over your hard drive. This is why, over time, your computer loses hard disk space. This blog post will show you some of the most common places where these files are left and which ones you can safely delete..NET Left OversVisual Studio is a great development environment for creating applications quickly. However, it will leave a lot of miscellaneous files all over your hard drive. There are a few locations on your hard drive that you should be checking to see if there are left-over folders or files that you can delete. I have attempted to gather as much data as I can about the various versions of .NET and operating systems. Of course, your mileage may vary on the folders and files I list here. In fact, this problem is so prevalent that PDSA has created a Computer Cleaner specifically for the Visual Studio developer.  Instructions for downloading our PDSA Developer Utilities (of which Computer Cleaner is one) are at the end of this blog entry.Each version of Visual Studio will create “temporary” files in different folders. The problem is that the files created are not always “temporary”. Most of the time these files do not get cleaned up like they should. Let’s look at some of the folders that you should periodically review and delete files within these folders.Temporary ASP.NET FilesAs you create and run ASP.NET applications from Visual Studio temporary files are placed into the <sysdrive>:\Windows\Microsoft.NET\Framework[64]\<vernum>\Temporary ASP.NET Files folder. The folders and files under this folder can be removed with no harm to your development computer. Do not remove the "Temporary ASP.NET Files" folder itself, just the folders underneath this folder. If you use IIS for ASP.NET development, you may need to run the iisreset.exe utility from the command prompt prior to deleting any files/folder under this folder. IIS will sometimes keep files in use in this folder and iisreset will release the locks so the files/folders can be deleted.Website CacheThis folder is similar to the ASP.NET Temporary Files folder in that it contains files from ASP.NET applications run from Visual Studio. This folder is located in each users local settings folder. The location will be a little different on each operating system. For example on Windows Vista/Windows 7, the folder is located at <sysdrive>:\Users\<UserName>\AppData\Local\Microsoft\WebsiteCache. If you are running Windows XP this folder is located at <sysdrive>:\ Documents and Settings\<UserName>\Local Settings\Application Data\Microsoft\WebsiteCache. Check these locations periodically and delete all files and folders under this directory.Visual Studio BackupThis backup folder is used by Visual Studio to store temporary files while you develop in Visual Studio. This folder never gets cleaned out, so you should periodically delete all files and folders under this directory. On Windows XP, this folder is located at <sysdrive>:\Documents and Settings\<UserName>\My Documents\Visual Studio 200[5|8]\Backup Files. On Windows Vista/Windows 7 this folder is located at <sysdrive>:\Users\<UserName>\Documents\Visual Studio 200[5|8]\.Assembly CacheNo, this is not the global assembly cache (GAC). It appears that this cache is only created when doing WPF or Silverlight development with Visual Studio 2008 or Visual Studio 2010. This folder is located in <sysdrive>:\ Users\<UserName>\AppData\Local\assembly\dl3 on Windows Vista/Windows 7. On Windows XP this folder is located at <sysdrive>:\ Documents and Settings\<UserName>\Local Settings\Application Data\assembly. If you have not done any WPF or Silverlight development, you may not find this particular folder on your machine.Project AssembliesThis is yet another folder where Visual Studio stores temporary files. You will find a folder for each project you have opened and worked on. This folder is located at <sysdrive>:\Documents and Settings\<UserName>Local Settings\Application Data\Microsoft\Visual Studio\[8|9].0\ProjectAssemblies on Windows XP. On Microsoft Vista/Windows 7 you will find this folder at <sysdrive>:\Users\<UserName>\AppData\Local\Microsoft\Visual Studio\[8|9].0\ProjectAssemblies.Remember not all of these folders will appear on your particular machine. Which ones do show up will depend on what version of Visual Studio you are using, whether or not you are doing desktop or web development, and the operating system you are using.SummaryTaking the time to periodically clean up after Visual Studio will aid in keeping your computer running quickly and increase the space on your hard drive. Another place to make sure you are cleaning up is your TEMP folder. Check your OS settings for the location of your particular TEMP folder and be sure to delete any files in here that are not in use. I routinely clean up the files and folders described in this blog post and I find that I actually eliminate errors in Visual Studio and I increase my hard disk space.NEW! PDSA has just published a “pre-release” of our PDSA Developer Utilities at http://www.pdsa.com/DeveloperUtilities that contains a Computer Cleaner utility which will clean up the above-mentioned folders, as well as a lot of other miscellaneous folders that get Visual Studio build-up. You can download a free trial at http://www.pdsa.com/DeveloperUtilities. If you wish to purchase our utilities through the month of November, 2011 you can use the RSVP code: DUNOV11 to get them for only $39. This is $40 off the regular price.NOTE: You can download this article and many samples like the one shown in this blog entry at my website. http://www.pdsa.com/downloads. Select “Tips and Tricks”, then “Developer Machine Clean Up” from the drop down list.Good Luck with your Coding,Paul Sheriff** SPECIAL OFFER FOR MY BLOG READERS **We frequently offer a FREE gift for readers of my blog. Visit http://www.pdsa.com/Event/Blog for your FREE gift!

    Read the article

  • Silverlight Cream for May 15, 2010 -- #862

    - by Dave Campbell
    In this Issue: Victor Gaudioso, Antoni Dol(-2-), Brian Genisio, Shawn Wildermuth, Mike Snow, Phil Middlemiss, Pete Brown, Kirupa, Dan Wahlin, Glenn Block, Jeff Prosise, Anoop Madhusudanan, and Adam Kinney. Shoutouts: Victor Gaudioso would like you to Checkout my Interview with Microsoft’s Murray Gordon at MIX 10 Pete Brown announced: Connected Show Podcast #29 With … Me! From SilverlightCream.com: New Silverlight Video Tutorial: How to Create Fast Forward for the MediaElement Victor Gaudioso's latest video tutorial is on creating the ability to fast-forward a MediaElement... check it out in the tutorial player itself! Overlapping TabItems with the Silverlight Toolkit TabControl Antoni Dol has a very cool tutorial up on the Toolkit TabItems control... not only is he overlapping them quite nicely but this is a very cool tutorial... QuoteFloat: Animating TextBlock PlaneProjections for a spiraling effect in Silverlight Antoni Dol also has a Blend tutorial up on animating TextBlock items... run the demo and you'll want to read the rest :) Adventures in MVVM – My ViewModel Base – Silverlight Support! Brian Genisio continues his MVVM tutorials with this update on his ViewModel base using some new C# 4.0 features, and fully supports Silverlight and WPF My Thoughts on the Windows Phone 7 Shawn Wildermuth gives his take on WP7. He included a port of his XBoxGames app to WP7 ... thanks Shawn! Silverlight Tip of the Day #20 – Using Tooltips in Silverlight I figured Mike Snow was going to overrun me with tips since I have missed a couple days, but there's only one! ... and it's on Tooltips. Animating the Silverlight opacity mask Phil Middlemiss has an article at SilverZine describing a Behavior he wrote (and is sharing) that turns a FrameworkElement into an opacity mask for it's parent container... cool demo on the page too. Breaking Apart the Margin Property in Xaml for better Binding Pete Brown dug in on a Twitter message and put some thoughts down about breaking a Margin apart to see about binding to the individual elements. Building a Simple Windows Phone App Kirupa has a 6-part tutorial up on building not-your-typical first WP7 application... all good stuff! Integrating HTML into Silverlight Applications Dan Wahlin has a post up discussing three ways to display HTML inside a Silverlight app. Hello MEF in Silverlight 4 and VB! (with an MVVM Light cameo) Glenn Block has a post up discussing MEF, MVVM, and it's in VB this time... and it's actually a great tutorial top to bottom... all source included of course :) Understanding Input Scope in Silverlight for Windows Phone Jeff Prosise has a good post up on the WP7 SIP and how to set the proper InputScope to get the SIP you want. Thinking about Silverlight ‘desktop’ apps – Creating a Standalone Installer for offline installation (no browser) Anoop Madhusudanan is discussing something that's been floating around for a while... installing Silverlight from, say, a CD or DVD when someone installs your app. He's got some good code, but be sure to read Tim Heuer and Scott Guthrie's comments, and consider digging deeper into that part. Using FluidMoveBehavior to animate grid coordinates in Silverlight Adam Kinney has a cool post up on animating an object using the FluidMotionBehavior of Blend 4... looks great moving across a checkerboard... check out the demo, then grab the code. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Visual Studio 2010 SP1

    - by ScottGu
    Last week we shipped Service Pack 1 of Visual Studio 2010 and the Visual Studio Express Tools.  In addition to bug fixes and performance improvements, SP1 includes a number of feature enhancements.  This includes improved local help support, IntelliTrace support for 64-bit applications and SharePoint, built-in Silverlight 4 Tooling support in the box, unit testing support when targeting .NET 3.5, a new performance wizard for Silverlight, IIS Express and SQL CE Tooling support for web projects, HTML5 Intellisense for ASP.NET, and more.  TFS 2010 SP1 was also released last week, together with a new TFS Project Server Integration Pack and Load Test Feature Pack.  Brian Harry has a good blog post about the TFS updates here. VS 2010 SP1 Download Click here to download and install SP1 for all versions of Visual Studio (including express).  This installer examines what you have installed on your machine, and only downloads the servicing downloads necessary to update them to SP1.  The time it takes to download and update will consequently depend on what all you have installed.  Jon Galloway has a good blog post on tips to speed up the SP1 install by uninstalling unused components. Web Platform Installer Bundles In addition to the core VS 2010 SP1 installer, we have also put together two Web Platform Installer (WebPI) bundles that automate installing SP1 together with additional web-specific components: VS 2010 SP1 WebPI Bundle Visual Web Developer 2010 SP1 WebPI Bundle The above WebPI bundles automate installing: VS 2010/VWD 2010 SP1 ASP.NET MVC 3 (runtime + tools support) IIS 7.5 Express SQL Server Compact Edition 4.0 (runtime + tools support) Web Deployment 2.0 Only the components that are not already installed on your machine will be downloaded when you use the above WebPI bundles.  This means that you can run the WebPI bundle at any time (even if you have already installed SP1 or ASP.NET MVC 3) and not have to worry about wasting time downloading/installing these components again. Earlier this year I did two posts that discussed how to use IIS Express and SQL CE with ASP.NET projects in SP1.  Read the below posts to learn more about how to use them after you run the above bundles: Visual Studio 2010 SP1 and IIS Express Visual Studio 2010 SP1 and SQL CE for ASP.NET The above feature additions work with any web project type – including both ASP.NET Web Forms and ASP.NET MVC. Additional SP1 Notes Two additional notes about VS 2010 SP1: 1) One change we made between RTM and SP1 is that by default Visual Studio now uses software rendering instead of hardware acceleration when running on Windows XP.  We made this change because we’ve seen reports of (often inconsistent) performance issues caused by older video drivers.  Running in software mode eliminates these and delivers consistent speeds.  You can optionally re-enable hardware acceleration with SP1 using Visual Studio’s Tools->Options menu command – we did not remove support for HW acceleration on XP, we simply changed the default setting for it.  Jason Zander has written more details on the change and how to re-enable HW acceleration inside VS here. 2) We have discovered an issue where installing SP1 can cause TSQL intellisense within SQL Server Management Studio 2008 R2 to stop working (typing still works – but intellisense doesn’t show up).  The SQL team is investigating this now and I’ll post an update on how to fix this once more details are known.  Hope this helps, Scott P.S. I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

    Read the article

< Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >