Search Results

Search found 16476 results on 660 pages for 'computer repairs'.

Page 224/660 | < Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >

• USB drives not recognized all of a sudden (module usb_storage not loading)

  - by Siddharth

  I am very close to the solution, just need to know how to get usb-storage to load I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. sudo lsusb results Bus.... skipped 4 lines Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 sudo dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Edit : jsiddharth@siddharth-desktop:~$ sudo udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing UDEV [4757.144372] add /module/usb_storage (module) UDEV [4757.146558] remove /module/usb_storage (module) UDEV [4757.148707] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6 (usb) UDEV [4757.149699] add /bus/usb/drivers/usb-storage (drivers) UDEV [4757.151214] remove /bus/usb/drivers/usb-storage (drivers) UDEV [4757.156873] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0 (usb) UDEV [4757.160903] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) UDEV [4757.164672] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165163] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165440] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) Narrowing down more : Seems like I need usb_storage to load as a module jsiddharth@siddharth-desktop:~$ lsmod | grep usb usbserial 37201 0 usbhid 41937 0 hid 77428 1 usbhid Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful.

  Read the article

• Real-world use cases for Smalltalk

  - by Andrea Spadaccini

  Hello, I've been playing a bit with Smalltalk, and I found it interesting. I know that there are some classical examples of Smalltalk: the Smalltalk images themselves and the Seaside web framework, and that there are lots of in-house custom applications built using this language. I'd like to know if: there are computer applications actively used and developed apart from the ones I mentioned. there are software houses that use Smalltalk for doing their job when would you use Smalltalk instead of another language for developing from scratch a new application

  Read the article

• Grad school guides for professional programmers

  - by Peter Turner

  I've exhausted my googling abilities on this search (too many ad-sites peddling online degrees) and turned to my favorite resource, ya'll. I'm looking for a website, book or long winded answer that breaks down graduate programs at universities and colleges by their geographical area / online capability; relative cost; prestige; difficulty; applicability to software engineering, computer science or a project management MBA; and years to complete.

  Read the article

• Presenting Designing an SSIS Execution Framework to Steel City SQL 18 Jan 2011!

  - by andyleonard

  I'm honored to present Designing an SSIS Execution Framework (Level 300) to Steel City SQL - the Birmingham Alabama chapter of PASS - on 18 Jan 2011! The meeting starts at 6:00 PM 18 Jan 2011 and will be held at: New Horizons Computer Learning Center 601 Beacon Pkwy. West Suite 106 Birmingham, Alabama, 35209 ( Map for directions ) Abstract In this “demo-tastic” presentation, SSIS trainer, author, and consultant Andy Leonard explains the what, why, and how of an SSIS framework that delivers metadata-driven...(read more)

  Read the article

• Gui Batch program on USB

  - by Chris Okyen

  When I put my USB drive into a computer, I want autorun.inf to run a batch file that will have a win32/winform GUI windows interface to allow the user to select a program to run from the beginning similiar to like this: Please let me know if windows allows this without it being done programmatically. I know their are some automation programs that work by generating code based on what it records you do. But I don't knwo of any already built windows prompt like this, so I don't knwo how to record such an action.

  Read the article

• Core Parking in Ubuntu?

  - by Xxx Xxx

  Core parking is a new feature that introduced in Windows 7 to get better Battery performance . Depending on the resource use of the operating system it may park one or multiple cores of a multi-core cpu to reduce the computer’s power consumption and thermal emissions. Once operations require more processing power, the parked cores are activated again to assist in the tasks So my question is that is there any way i can do it on Ubuntu 12.04 " Core Parking " ?

  Read the article

• Cannot dual Windows XP and Ubuntu

  - by Fabio Machado

  I am new to Ubuntu and at the moment I am trying to get Ubuntu 12.10 to one of my machines. The machine is a Pentium 4 @ 3.06, 2Gb RAM, 200GB Hard Drive and a NVidia GeForce 8800 GT. A few days ago, I tried Ubuntu without installing and it worked perfectly. Yesterday, I decided to formatted the hard drive and divide my hard drive into four partitions: 1 for the XP, 1 for Ubuntu, 1 for swamp and 1 where I will have my documents. Everything went great, I installed XP and then Ubuntu but I did something wrong on the partition window (Ubunto partion window) that I ended up without boot loader. This morning, I formatted everything again, installed XP and when I went to install Ubuntu (with the same DVD as before) the problems started. First, I had a black screen with a msg written with white text saying something like: unable to find a medium containing a live file system. After I burned another CD and tried again, I got stuck at the red dots (loading screen). I then went online and I read somewhere that it could be the CD, so I checked the integrity of the CD and everything was fine. I also unplugged all USBs connected to the computer and nothing changed. I goggled further options to try to solve my problem and some users suggested that people having these types of problems should try the alternate installation, which if I am not wrong is for networks. I then tried to install and yes the installation process was different from the normal CD, but it did get stuck on a page where it was doing something, like: ...finding ethd0 and it was stuck on the 100%. I tried USB installation as well and it also got stuck at the red dots (I do not have USB 3.0 on the computer in question). I have burned 5 different CD's and all at low speed. I checked the integrity and all are fine. I downloaded other distribution as well as other versions of Ubuntu and I still cannot install or even run the Live CD of Ubuntu or any other distribution. What is really annoying me is that everything was working perfectly before, when I first tried to install Ubuntu. Anyway, any help is welcome. Edit: My boot load is normal, no errors and all the hardware is working fine. I forgot to mention that after the loading screen (red dots) gets stuck, the DVD drive and the hard drive goes into idle state. I also restored the default values of the BIOS and no luck.

  Read the article

• The Best Free Portable Apps for Your Flash Drive Toolkit

  - by Lori Kaufman

  Large capacity, small-sized, affordable USB flash drives provide us with the ability to easily carry around gigs of data in our pockets. Why not take our favorite programs with us as well so we can work on any computer? We have collected links to many useful portable programs you can easily install on a USB flash drive and create a portable version of your desktop PC. How to Own Your Own Website (Even If You Can’t Build One) Pt 3 How to Sync Your Media Across Your Entire House with XBMC How to Own Your Own Website (Even If You Can’t Build One) Pt 2

  Read the article

• Desktop Fun: Grasslands Wallpaper Collection Series 2

  - by Asian Angel

  This past year we shared a terrific collection of grasslands wallpapers with you and today we return with more of these wonderful ‘inland seas’ of waving grass. Travel these ‘land-based seas’ of green and gold on your desktop with the second in our series of Grasslands Wallpaper collections. 6 Ways Windows 8 Is More Secure Than Windows 7 HTG Explains: Why It’s Good That Your Computer’s RAM Is Full 10 Awesome Improvements For Desktop Users in Windows 8

  Read the article

• How can I browse by artist in Banshee?

  - by frankster

  I have ripped many CDs onto my computer. Some are compilations. I like to listen to entire albums at a time. The artist view is no use to me as it splits up artists from the compilations, and the album-artist view is a bit better but it still has problems because it splits an album up by each different artist listed in it. Is there a way to force banshee to list the albums? That would be most useful.

  Read the article

• Study Says to SMBS: You Don&amp;#146;t Know Security

  A study shows that while most SMBs worry about small business computer security, they have no idea how to prevent it or how to protect themselves from bank fraud and identity theft.

  Read the article

• How to Create a Vacation Away Message for (Almost) Any Email Account

  - by Taylor Gibb

  If you are heading out of town, you might want to put a note on your email to let people know where to contact you. Or just to let them know to contact somebody else while you’re away. Here’s how to setup a vacation responder for (almost) any email account. How to See What Web Sites Your Computer is Secretly Connecting To HTG Explains: When Do You Need to Update Your Drivers? How to Make the Kindle Fire Silk Browser *Actually* Fast!

  Read the article

• Ati2dvag Blue Screen Problem

  If your computer has just been getting slower and slower since you bought it and errors are becoming more frequent, it';s time for a tune up. This means running the latest updates, using security appl... [Author: Nathan Tyler - Computers and Internet - March 24, 2010]

  Read the article

• NVIDIA x server - "sudo nvidia config" does not generate a working 'xorg.config'

  - by Mike

  I am over 18 hours deep on this challenge. I got to this point and am stuck. very stuck. Maybe you can figure it out? Ubuntu Version 12.04 LTS with all the updates installed. Problem: The default settings in "etc/X11/xorg.conf" that are generated by the "nvidia-xconfig" tool, do not allow the NVIDIA x server to connect to the driver in my "System Settings Additional Driver window". (that's how I understand it. Lots of information below). Symptoms of Problem "System Settings Additional Driver" window has drivers, but the nvidia x server cannot connect/utilize any of the 4 drivers. the drivers are activated, but not in use. When I go to "System Tools Administration NVIDIA x server settings" I get an error that basically tells me to create a default file to initialize the NVIDIA X server (screen shot below). This is the messages the terminal gives after running a "sudo nvidia-xconfig" command for the first time. It seems that the generated file by the tool i just ran is generating a bad/unusable file: If I run the "sudo nvidia-xconfig" command again, I wont get an error the second time. However when I reboot, the default file that is generated (etc/X11/xorg.conf) simply puts the screen resolution at 800 x 600 (or something big like that). When I try to go to NVIDIA x server settings I am greeted with the same screen as the screen shot as in symptom 2 (no option to change the resolution). If I try to go to "system settings display" there are no other resolutions to choose from. At this point I must delete the newly minted "xorg.conf" and reinstate the original in its place. Here are the contents of the "xorg.conf" that is generated first (the one missing required information): # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 304.88 (buildmeister@swio-display-x86-rhel47-06) Wed Mar 27 15:32:58 PDT 2013 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Hardware: I ran the "lspci|grep VGA". There results are: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) More Hardware info: Ram: 16GB CPU: Intel Core i7-2720QM @2.2GHz * 8 Other: 64 bit. This is a triple boot computer and not a VM. Attempts With Not Success on My End: 1) Tried to append the "xorg.conf" with what I perceive is missing information and obviously it didn't fly. 2) All the other stuff I tried got me to this point. 3) See if this link is helpful to you (I barely get it, but i get enough knowing that a smarter person might find this useful): http://manpages.ubuntu.com/manpages/lucid/man1/nvidia-xconfig.1.html 4) I am completely new to Linux (40 hours over past week), but not to programming. However I am very serious about changing over to Linux. When you respond (I hope someone responds...) please respond in a way that a person new to Linux can understand. 5) By the way, the reason I am in this mess is because I MUST have a second monitor running from my laptop, and "System Settings Display" doesn't recognize my second display. I know it is possible to make the second display work in my system, because when I boot from the install CD, I perform work on the native laptop monitor, but the second monitor shows a purple screen with Ubuntu in the middle, so I know the VGA port is sending a signal out. If this is too much for you to tackle please suggest an alternative method to get a second display. I don't want to go to windows but I cannot have a single display. I am really fudged here. I hope some smart person can help. Thanks in advance. Mike. **********************EDIT #1********************** More Details About Graphics Card I was asked "which brand of nvidia-card do you have exactly?" Here is what I did to provide more info (maybe relevant, maybe not, but here is everything): 1) Took my Lenovo W520 right apart to see if there is an identifier on the actual card. However I realized that if I get deep enough to take a look, the laptop "won't like it". so I put it back together. Figuring out the card this way is not an option for me right now. 2) (My computer is triple boot) I logged into Win7 and ran 'dxdiag' command. here is the screen shot: 3) I tried to look on the lenovo website for more details... but no luck. I took a look at my receipts and here is info form receipt: System Unit: W520 NVIDIA Quadro 1000M 2GB 4) In win7 I went to the NVIDIA website and used the option to have my card 'scanned' by a Java applet to determine the latest update for my card. I tried the same with Ubuntu but I can't get the applet to run. Here is the recommended driver from from the NVIDIA Applet for my card for Win7 (I hope this shines some light on the specifics of the card): Quadro/NVS/Tesla/GRID Desktop Driver Release R319 Version: 320.00 WHQL Release Date: 3.5.2013 5) Also I went on the NVIDIA driver search and looked through every possible combination of product type + product series + product to find all the combinations that yield a 1000M card. My card is: Product Type: Quadro Product Series: Quadro Series (Notebooks) Product: 1000M ***********************EDIT #2******************* Additional Symptoms Another question that generated more symptoms I previously didn't mention was: "After generating xorg.conf by nvidia-xconfig, go to additional drivers, do you see nvidia-304?" 1) I took a screen shot of the "additional drivers" right after generating xorg.conf by nvidia-xconfig. Here it is: 2) Then I did a reboot. Now Ubuntu is 600 x 800 resolution. When I logged in after the computer came up I got an error (which I always get after generating xorg.conf by nvidia-xconfig and rebooting) 3) To finally answer the question - No. There is no "NVIDIA-304" driver. Screen shot of additional drivers after generating xorg.conf by nvidia-xconfig and rebooting : At this point I revert to the original xorg.conf and delete the xorg.conf generated by Nvidia.

  Read the article

• Debian Project Pleased with Ten Times Faster Build Server

  <b>Linux Pro:</b> "The Debian project was given a new server from Thomas Krenn AG, Intel and Adaptec for its image building. With the Dual-Xeon computer the build process was reduced from 20 to two hours."

  Read the article

• Internet Explorer Security: How to Configure Settings

  Before jumping into the steps that are needed to configure Internet Explorer's security settings, let us first take a closer look at the four separate security zones that Microsoft has established for the browser. You will be able to tweak the settings of each of these four zones when we get into the configuration part of this tutorial, so it is best that you learn what they represent first. Internet Explorer Security Zones Internet Zone This Internet Explorer security zone refers to websites that are not on your computer or are not designated to your local intranet, which we will discuss in ...

  Read the article

• terminal does not find xmonad.hs

  - by arpho

  Iam using xmonad on ubuntu 13.04, in ~/.xmonad my computer has the file xmonad.hs, if I try to read it from terminal using nano it opens a new file, I can access the file opening it from geany or gedit, but if I try to recompile it, the system does not find that file, so I cannot configure xmonad, every thing I try on this file from console does not work, because terminal even if I am root cannot see it, can you help me solve this issue?

  Read the article

• Zombie Survival Gear and Critical Survival Skills Chart

  - by Asian Angel

  Halloween is fast approaching and what more opportune time could there be for the Zombie Apocalypse to finally occur? Be prepared with the right survival gear and skills to safely see you through it using this handy guide! Zombie Survival Gear [infographic] [via Cheeseburger Network] What To Do If You Get a Virus on Your Computer Why Enabling “Do Not Track” Doesn’t Stop You From Being Tracked HTG Explains: What is the Windows Page File and Should You Disable It?

  Read the article

• Open World Day 3

  - by Antony Reynolds

  A Day in the Life of an Oracle OpenWorld Attendee Part IV My third day was exhibition day for me!  I took the opportunity to wander around the JavaOne and OpenWorld exhibitions to see what might be useful for me when selling WebLogic, Coherence & SOA Suite.  I found a number of interesting vendors and thought I would share what I found here.  These are not necessarily endorsements, but observations on companies that I thought had interesting looking products that fill a need I have seen at customers. Highly Available EBS Upgrades A few years ago I worked with a customer that was a port authority.  They wanted to tie E-Business Suite into their operations to provide faster processing of cargo and passengers.  However they only had a 2 hour downtime window to perform upgrades.  This was not a problem for core database and middleware technology, this could accommodate those upgrade timescales easily.  It was a problem for EBS however so I intrigued to find Rapid E-Suite Inc offering an 11i to 12i upgrade service that claims to require no outage.  This could be a real boon to EBS customers like my port friends that need to upgrade without disruption to their business. Mobile on WebLogic I have come across a number of customers who want a comprehensive mobile solution, connected and disconnected operation and so forth.  ADF only addresses part of these requirements currently so I was excited to discover mFrontiers Inc offering an apparently comprehensive solution that should integrate easily with Oracle SOA Suite to mobile enable a SOA infrastructure.  The ability to operate without a network is important for many applications, particularly in industries that require their engineers to enter buildings to perform maintenance or repairs, because network access is not always available – many of my colleagues don’t have mobile access from their homes because they live in the middle of nowhere – and disconnected support is crucial in these situations. Sharepoint Connector for WebCenter Content Obviously Sharepoint is an evil pernicious intrusion into a companies IT estate but it is widely deployed and many people like it but also would like to take advantage of Oracle products such as WebCenter Content.  So I was encouraged to see that Fishbowl Solutions have created a connector for Sharepoint that allows it to bring in content from WebCenter, it looks like a valuable way to maintain the Sharepoint interface end users are used to but extend the range of content by pulling stuff (technical term for content) from WebCenter.   Load Balancing The Enterprise Deployment Guides are Oracles bible on building highly available FMW environments, and each of them requires a front end load balancer.  I have been asked to help configure F5 Load Balancers on a number of occasions over my time at Oracle and each time I come back to it I find more useful features have been added to the BigIP line of load balancers that F5 sell, many of their documents are tailored to FMW.  I like F5, they provide (relatively) easy to use products that do what they say on the side of the box.  They may not have all the bells and whistles of some of their more expensive competitors but they do the job and do it well!  Besides which I like their logo! Other Stuff I saw lots of other interesting products and services, such as a lightweight monitoring tool for Coherence, Forms migration services, JCAPS migration services and lots of cool freebies to take home to the children! A Quiet Night Wednesday night was the partner appreciation event and I had decided to go back to the hotel and have an early night.  I decided to attend the last session of the day – a Maven/Hudson/WebLogic tutorial.  I got the wrong hotel for the session and snuck in 20 minutes late at the back and starting working on the hands on workshop.  One of my co-attendees raised his hand for help and as the presenter came over to help he suddenly stopped and yelled – “Is that Antony”!  It was my old friend Steve Button who used to be based in Redwood Shores but is now a WebLogic guru PM in Australia.  It was good to catch up with him.  As he yelled out a guy with really bad posture turned around to see who he was talking to, this turned out to be my friend Simon Haslan, Oracle ACE from the UK.  After the tutorial Simon and I retired to the coffee shop to catch up and share stories.  2 and half hours later we decided it was time to retire, so much for an early night but great to renew old friendships and find out what real customers are worrying about.

  Read the article

• Creating a programming crossword puzzle

  Most programming-related crossword puzzles are generated by computer programs, and consequently lack the design and wordplay which makes New York Times-style crossword puzzles interesting. I decided that I could do better.

  Read the article

• The Tortoise and the Hare

  <b>Legal World and Childhood Dreams:</b> "Summary: The paper explains how computer software is protected and the relationship between open source software and copyright."

  Read the article

• Lightning is not compatible with Thunderbird 7.0.1

  - by Fredrik

  I reinstalled Ubuntu 11.10 the other day and now when I try to install the Lightning extension in Thunderbird it states: Lightning is not compatible with Thunderbird 7.0.1. As extra information lightning is not comming up automaticly when searching for it within Thunderbird. You need to download it manually. And also I had it installed before I reformated the computer. Anybody has a solution to this issue?

  Read the article

• Report: How Compiz Fusion and Chaos Built a Linux Hardware Company

  ZaReason is a popular independent Linux computer company, founded by Cathy and Earl Malmrose. Cathy Malmrose tells the tale of how ZaReason came into existence thanks to chaos and Compiz Fusion.

  Read the article

• Do I need to replace my hard disk?

  - by Sneha Kamath

  Hello everyone. Whenever I start my computer Ubuntu pops up the following error: A hard disk may be failing one or more hard disk report health problems A friend of mine ran some test and it was found that my hard disk has 74 bad sectors. Is this merely a software issue that will be solved after a complete format of my hard disk, or is it a hardware issue and I will have to replace my hard disk? Awaiting your responses. Thanks, Sneha Kamath.

  Read the article

• Add a database to use with locate command

  - by Pedro Teran

  i would like to know if anyone knows how I can create a database of a file system on my computer. so I can choose this data base to search for files on this file system efficiently. I ask this question since in man locate I found that I can choose a database for a different file system. Also would be grate if /var/lib/mlocate/mlocate.db database can have the data of 2 disks any approach ideas or others would be greatly appreciated

  Read the article

< Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >