Search Results

Search found 10280 results on 412 pages for 'remote shutdown'.

Page 225/412 | < Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >

  • Screen capture of USB connected CE device

    - by Sorskoot
    Does anyone know if there's a tool to capture a video from a CE device (like this)? I used the Windows CE Remote Zoom-in to capture stills, but for presentation purposes I would like to show moving images. The devices is connected a pc using USB. I've tried using a webcam, but I have to move the device around all the time to scan products.

    Read the article

  • VPN IP Routing - slow connections

    - by dannymcc
    UPDATE: Router error logs show: LCP Time-out 0 I'm not sure how to correct this. The Lan-to-Lan profiles are set to -1 Idle Timeout (for the remote branch). I have a PPTP VPN running between two Draytek 2820 routers. They are setup that one dials out to the other one. Main Practice - 192.168.1.0/24 Branch - 192.168.3.0/24 I have then set (on the Branch) router the following route: 192.168.1.0/24 If I then request a server running on 192.168.1.1 from the Branch, it correctly routes through VPN tunnel. If I request the branch server at 192.168.3.1 it correctly routes to the local server without using the VPN tunnel. I have temporarily disabled the firewall on both routers, and made sure that QoS is disabled. The Main Practice internet connection is ~30mb down / ~10mb up, and the Branch connection is ~5mb down / ~2mb up. Anything over the VPN tunnel runs pretty slowly (VNC, Remote Desktop and Terminal Emulators). However, if I dial using the Windows VPN wizard, creating a connection from the laptop to the Main Practice - everything runs quickly. I'm looking for possible causes, and/or ways of further diagnosing the issue. Any help would be greatly appreciated! UPDATE: In summary, when I connect within the Branch and try and access a host that's within the Main Practice it works, but slowly. If I then dial the VPN on my Windows 7 laptop whilst still connected to the Branch network, it's fast. Main Practice Branch Practice Routing Table from Branch Router Key: C - connected, S - static, R - RIP, * - default, ~ - private * 0.0.0.0/ 0.0.0.0 via 126.256.126.103 WAN2 C~ 192.168.1.99/ 255.255.255.255 directly connected VPN-1 S~ 192.168.1.0/ 255.255.255.0 via 192.168.1.99 VPN-1 S~ 192.168.2.0/ 255.255.255.0 via 192.168.1.99 VPN-1 C~ 192.168.3.0/ 255.255.255.0 directly connected LAN2 C 126.256.126.103/ 255.255.255.224 directly connected WAN2 Routing Table from Main Practice Key: C - connected, S - static, R - RIP, * - default, ~ - private * 0.0.0.0/ 0.0.0.0 via 81.139.64.1, WAN2 S 81.137.176.1/ 255.255.255.255 via 81.137.176.1, WAN2 * 81.139.64.1/ 255.255.255.255 via 81.139.64.1, WAN2 C~ 192.168.1.204/ 255.255.255.255 is directly connected, VPN C~ 192.168.1.0/ 255.255.255.0 is directly connected, LAN S~ 192.168.2.0/ 255.255.255.0 via 192.168.1.204, VPN S~ 192.168.3.0/ 255.255.255.0 via 192.168.1.203, VPN Connection Details (from Branch Router) Connection Details (from Main Practice Router) IPERF.exe Output

    Read the article

  • iis not listening on port 80

    - by user57467
    We have server 2003 and ISA 2004 with IIS 6 on same machnie. Everything worked well till yesterday, when we try to make some new rule in ISA..but this is a long story... Unfortunatelly something happend with our intranet site. Our site is on the port 80, but if we try to open on this client machines then we got and error page (which error page is our provider): 403-forbidden; Remote host not listening, the remote host is not prepared to acceppt the connection request. On the server i can open the site with port 80. If i change the port number in the iis and try to open the site with the port, then works well. I try to shut down IIS and start apache with a simple page. On the server works well but in clients the problem is the same, so i think this is not an IIS related problem. In the ISA we have a web pub rule, with port 80, no auth. Im pulling out my hair, please help. after uninstall and reinstall ISA, de sites work well, till i configure the upstream proxy in the conf/network/web chaining menu and then everything went same... So something wrong with the web-proxy / upstream function... (all my http request forward to my upstream proxy). That was the set long time ago...but a few day ago somehing went wrong... I think maybee our ISP spoiled something..tomorrow i try to figure out... But one more thing: I make a new rule before the default rule in the conf/network/web chaining menu. Every request go to the server not redirected.. Redirect to upstream server.... So if the request goes to our server (our site) then handled locally, and if not then go to upstream proxy and voilllaaa....i tougth... But unfortunatelly: our website work well, but internet work extreamly slowly..:( Maybee with single adapter i can made this? I have to handle all request locally or i have to send all to upstream? I cant filter it?

    Read the article

  • DHCP Requests Failing

    - by Jon Rauschenberger
    Clients on our network recently started receiving this error when attemping to acquire an IP Address from our DHCP Server: "the name specified in the network control block (ncb) is in use on a remote adapter" The DHCP Server is a Windows Server 2008 R2 machine, most of the client are Win 7. Can't find much on that error, anyone have an idea what could cause it? Thanks, jon

    Read the article

  • Backing up my data causes my server to crash using Symantec Backup Exec 12, or How I Came to Loathe

    - by Kyle Noland
    I have a Dell PowerEdge 2850 running Windows Server 2003. It is the primary file server for one of my clients. I have another server also running Windows Server 2003 that acts as the core media server for Symantec Backup Exec 12. I recently upgraded from Backup Exec 11d to 12. This upgrade was necessary because we also just upgraded from Exchange 2003 to Exchange 2007. After the upgrade I had to push-install the new version 12 Backup Exec Remote Agents to each of the servers I am backing up (about 6 total). 5 of my servers are doing just fine, faithfully completing backups every night. My file server routinely crashes. Observations: When the server crashes, it does not blue screen, it just locks up completely. Even the mouse is unresponsive. If you leave the server locked up long enough, it will eventually reboot itself and hang on the Windows splash screen. There is absolutely zero useful Event Viewer evidence of a problem. The logs go from routine logging to an Unexplained Shutdown Event the next morning when I have to hard reset the server to get it to boot. 90% of the time the server does not boot cleanly, it hangs on the Windows splash screen. I don't have any light to shed here. When the server hangs all I can do is hard reset it and try again. Even after a successful boot and chkdsk /r operation, if you reboot the machine, you have a 90% chance it won't back up again cleanly. The back story: This server started crashing during nightly backups about a month ago. I tried everything I could think of to troubleshoot the problem and eventually had to give up because I could not keep coming to the office at 4 AM to try to get the server back online. One Friday I got lucky and the server stayed up for its entire full backup. I took this opportunity to restore the full backup to a temporary server I set up and switched all my users to the temporary. Then I reloaded the ailing file server. I kept all my users on the temporary file server for about 3 weeks. I installed the same Backup Exec Remote Agent and Trend Micro A/V client on the temporary server that I was using on the regular file server. During this time, I had absolutely no problems backing up the temporary server. I tested the reloaded file server extensively. I rebooted the server once an hour every day for 3 weeks trying to make it fail. It never did. I felt confident that the reload was the answer to my problems. I moved all of the data from the temporary server back to the regular server. I got 3 nightly backups out of it before it locked up again and started the familiar failure to boot cleanly behavior. This weekend I decided to monitor the file server through the entire backup job. I RDPd into the file server and also into the server running Backup Exec. On the file server I opened the Task Manager so I could view the processes and watch CPU and memory usage. Everything was running smoothly for about 60GB worth of backup. Then I noticed that the byte count of the backup job in Backup Exec had stopped progressing. I looked back over at my RDP session into the file server, and I was getting real time updates about CPU and memory usage still - both nearly 0%, which is unusual. Backups usually hover around 40% usage for the duration of the backup job. Let me reiterate this point: The screen was refreshing and I was getting real time Task Manager updates - until I clicked on the Start menu. The screen went black and the server locked up. In truth, I think the server had already locked up, the video card just hadn't figured it out yet. I went back into my bag of trick: driving to the office and hard reseting the server over and over again when it hangs up at the Windows splash screen. I did this for 2 hours without getting a successful boot. I started panicking because I did not have a decent backup to use to get everything back onto the working temporary file server. Once I exhausted everything I knew to do, I took a deep breath, booted to the Windows Server 2003 CD and performed a repair installation of Windows. The server came back up fine, with all of my data intact. I can now reboot the server at will and it will come back up cleanly. The problem is that I'm afraid as soon as I try to back that data up again I will back at square one. So let me sum things up: Here is what I've done so far to troubleshoot this server: Deleted and recreated the RAID 5 sets. Initialized the drives. Reloaded the server with a fresh Server 2003 install. Confirmed with Dell that I have installed the latest, Dell approved BIOS and NIC drivers. Uninstalled / reinstalled the Backup Exec Remote Agent. Uninstalled the Trend Micro A/V client. Configured the server not to reboot itself after a blue screen so I can see any stop error. I used to think the server was blue screening, but since I enabled this setting I now know that the server just completely locks up. Run chkdsk /r from the Windows Recovery Console. Several errors were found and corrected, but did not help my problem. Help confirm or deny the following assumptions: There are two problems at work here. Why the server is locking up in the first place, and why the server won't boot cleanly after a lockup. This is ultimately a software problem. The server works fine and can be rebooted cleanly all day long - until the first lockup - following a fresh OS load or even a Repair installation. This is not a problem with Backup Exec in general. All of my other servers back up just fine. For the record, all of the other servers run Server 2003, and some of them house more data than the file server in question here. Any help is appreciated. The irony is almost too much to bear. Backing up my data is what is jeopardizing it.

    Read the article

  • Multiple syslog-ng destination loghosts

    - by pablo808
    I am currently forwarding logs to one remote destination loghost. filter f_windows { program("Security-Audit*"); }; log { source(r_sys); filter(f_windows); destination(d_windows); }; log { source(r_sys); filter (f_windows); destination(d_loghost); }; I would like to forward these logs to two additional remote destination loghost's. The manual defines destination syntax as: destination <identifier> { destination-driver(params); destination-driver(params); ... }; Tried these different configs: Define additional destinations hosts in d_loghost: destination d_loghost { udp("server1" port(514)); udp("server2" port(514)); udp("server3" port(514));}; filter f_windows { program("Security-Audit*"); }; log { source(r_sys); filter (f_windows); destination(d_loghost); }; Define addtional destination hosts in their own d_loghost definitions: destination d_loghost1 { udp("server1" port(514)); destination d_loghost2 { udp("server2" port(514)); destination d_loghost3 { udp("server3" port(514)); filter f_windows { program("Security-Audit*"); }; log { source(r_sys); filter (f_windows); destination(d_loghost1); }; log { source(r_sys); filter (f_windows); destination(d_loghost2); }; log { source(r_sys); filter (f_windows); destination(d_loghost3); }; Both fail unfortuantly, what am I missing? Thanks.

    Read the article

  • Need help making an ODBC MySQL Connection

    - by Andy Moore
    Short Version: How do I connect from PowerShell to an ODBC 5.1 MySQL Driver? I can't seem to find any connection strings that accurately have a "Provider" field for this particular instance. (See bottom of this question for examples/errors) ===== Long Version: I'm not a server guy, and I've been handed the task of setting up PowerGadgets on our network. I have a MySQL server running on a Linux box, that is configured for remote access and has a user defined for remote access as well. On my windows desktop PC, I have PowerGadgets installed. I installed the MySQL ODBC 5.1 connector, and went to Control Panel Data Sources and set up a User DSN connection to the database. The connection, user, and pass seem to be correct because it lists the tables of the database in my windows control panel. Where I'm running into trouble is in 3 places in PowerGadgets: When selecting a data source, I can select "SQL Server". Inputting the servers IP address does not work and I can't get this option to work at all. When selecting a data source, I can select "OleDB". This screen has a wizard on it, that appears to populate all the correct information (including database table names!) for me. "Test Connection" runs great. But if I try to complete the wizard, I get the error "The .NET Framework data provider for OLEDB does not support the MS Ole DB provider for ODBC Drivers." When selecting a data source, I can select "ODBC". This screen does not have a wizard and I cannot figure out a "connection string" that works. Typically it will respond with the error "The field 'Provider' is missing". Googling ODBC connection strings doesn't reveal any examples with a "provider" field and have no idea what to put in here. The connection string (for #2) above contains "SQLOLEDB" as a provider, and upon inputting that value into this connection string I get the same connection error that #2 gets. I believe I can solve my problems by figuring out a connection string for #3 but don't know where to get started. (PowerGadgets also allows for PowerShell support but I believe I will run into the same problem there) == Here's my current PowerShell connection that doesn't work: invoke-sql -connection "Driver={MySQL ODBC 5.1 Driver};Initial Catalog=hq_live;Data Source=HQDB" -sql "Select * FROM accounts" Spits back the error: "Invoke-Sql : An OLE DB Provider was not specified in the ConnectionString. An example would be, 'Provider=SQLOLEDB;'. == Another string that doesn't work: invoke-sql -connection "Provider=MSDASQL.1;Persist Security Info=False;Data Source=HQDB;Initial Catalog=hq_live" -sql "select * from accounts" And the error: The .Net Framework Data Provider for OLEDB (System.Data.OleDb) does not support the Microsoft OLE DB Provider for ODBC Drivers (MSDASQL). Use the .Net Framework Data Provider for ODBC (System.Data.Odbc).

    Read the article

  • Prevent scp from copying local files?

    - by ashcatch
    I just read the Linux scp command issue question and it reminded me that I regularily forget to specify the colon in the host part of a scp command, and thus copying a file locally instead of copying to a remote host, e.g. I do scp foo host instead of scp foo host: But I never use scp to copy a file locally. So I wonder if there is a way to make scp fail if both (the source and destination) arguments refer to local files.

    Read the article

  • RDP access to DirectAccess Server via DirectAccess

    - by crgnz
    I have just setup a Win2008R2 DirectAccess server (and also a Win2008R2 Active Directory server). From the Internet I can Remote Desktop login to the AD server, but I cannot RDP into the DirectAccess server. I can PING both servers and get an IPv6 response. (I can RDP to the DirectAccess server from the internal company network) DirectAccess is configured to allow full intranet access. I think I've hit a mental block, the answer will probably be obvious, but I just can't see it.

    Read the article

  • Linux scp command issue

    - by George2
    Hello everyone, I am using scp command to copy file from a MacBook Pro OS X 10.5 to another Linux box (Red Hat Linux Enterprise 5). I am using the following command on Mac, sudo scp ~/.ssh/mykey.rsa [email protected], there is no output from Mac command line. I am not sure whether the scp is success or not. Where is the location the file mykey.rsa on remote computer 10.10.100.101? thanks in advance, George

    Read the article

  • The RPC services keeps stopping

    - by oshirowanen
    For some reason, the RPC service keeps stopping which prevents me from remoting into the server. When this happens I have to manually make my way to the server to restart it as simply starting the service (which does not complain when starting), does not let me remote into the server. I have to restart the server manually to be able to remove into the server again. It seems to be happening a few times a day. Does anyone know why this might be happening?

    Read the article

  • Keep IIS7 Failed Request Tracing as a sysadmin only diagnostic tool?

    - by Kev
    I'm giving some of our customers the ability to manage their sites via IIS Feature Delegation and IIS Manager for Remote Administration. One feature I'm unsure about permitting access to is Failed Request Tracing for the following reasons: Customers will forget to turn it off The server will be taking a performance hit (especially if 500 sites all have it turned on) The server will become littered with old FRT's The potential to leak sensitive information about how the server is configured thus providing useful information to would-be intruders. Should we just keep this as a troubleshooting tool for our own admins?

    Read the article

  • SSH into Fedora 17 will not work with new users

    - by psion
    I just deployed a new Fedora 17 server on the Amazon EC2. I was able to log in as ec2-user with my generated keypair, but I cannot log in under normal circumstances as a user I created. This is just a normal ssh: ssh user@ip-address Any ideas on what is going on here? EDIT: This is a snippit from my sshd_config file # To disable tunneled clear text passwords, change to no here! PasswordAuthentication no #PermitEmptyPasswords no PasswordAuthentication no EDIT AGAIN: This is the output of ssh -v. OpenSSH_5.8p2, OpenSSL 1.0.0i-fips 19 Apr 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 107.23.2.165 [107.23.2.165] port 22. debug1: Connection established. debug1: identity file /home/psion/.ssh/id_rsa type 1 debug1: identity file /home/psion/.ssh/id_rsa-cert type -1 debug1: identity file /home/psion/.ssh/id_dsa type 2 debug1: identity file /home/psion/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9 debug1: match: OpenSSH_5.9 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 19:cb:84:21:a9:0e:83:96:2f:6a:fa:7d:ce:39:0f:31 debug1: Host '107.23.2.165' is known and matches the RSA host key. debug1: Found key in /home/psion/.ssh/known_hosts:5 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: Next authentication method: gssapi-keyex debug1: No valid Key exchange context debug1: Next authentication method: gssapi-with-mic debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_1000' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_1000' not found debug1: Unspecified GSS failure. Minor code may provide more information debug1: Unspecified GSS failure. Minor code may provide more information debug1: Next authentication method: publickey debug1: Offering DSA public key: /home/psion/.ssh/id_dsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: Offering RSA public key: /home/psion/.ssh/id_rsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: No more authentication methods to try. Permission denied (publickey,gssapi-keyex,gssapi-with-mic).

    Read the article

  • Ssh, run a command on login, and then Stay Logged In?

    - by jonathan
    I tried this with expect, but it didn't work: it closed the connection at the end. Can we run a script via ssh which will log into remote machines, run a command, and not disconnect? So ssh in a machine, cd to such and such a directory, and then run a command, and stay logged in. -Jonathan (expect I used) #!/usr/bin/expect -f set password [lrange $argv 0 0] spawn ssh root@marlboro "cd /tmp; ls -altr | tail" expect "?assword:*" send -- "$password\r" send -- "\r" interact

    Read the article

  • 6to4 tunnel: cannot ping6 to ipv6.google.com?

    - by quanta
    Hi folks, Follow the Setup of 6to4 tunnel guide, I want to test ipv6 connectivity, but I cannot ping6 to ipv6.google.com. Details below: # traceroute 192.88.99.1 traceroute to 192.88.99.1 (192.88.99.1), 30 hops max, 40 byte packets 1 static.vdc.vn (123.30.53.1) 1.514 ms 2.622 ms 3.760 ms 2 static.vdc.vn (123.30.63.117) 0.608 ms 0.696 ms 0.735 ms 3 static.vdc.vn (123.30.63.101) 0.474 ms 0.477 ms 0.506 ms 4 203.162.231.214 (203.162.231.214) 11.327 ms 11.320 ms 11.312 ms 5 static.vdc.vn (222.255.165.34) 11.546 ms 11.684 ms 11.768 ms 6 203.162.217.26 (203.162.217.26) 42.460 ms 42.424 ms 42.401 ms 7 218.188.104.173 (218.188.104.173) 42.489 ms 42.462 ms 42.415 ms 8 218.189.5.10 (218.189.5.10) 42.613 ms 218.189.5.42 (218.189.5.42) 42.273 ms 42.300 ms 9 d1-26-224-143-118-on-nets.com (118.143.224.26) 205.752 ms d1-18-224-143-118-on-nets.com (118.143.224.18) 207.130 ms d1-14-224-143-118-on-nets.com (118.143.224.14) 206.970 ms 10 218.189.5.150 (218.189.5.150) 207.456 ms 206.349 ms 206.941 ms 11 * * * 12 10gigabitethernet2-1.core1.lax1.he.net (72.52.92.121) 214.087 ms 214.426 ms 214.818 ms 13 192.88.99.1 (192.88.99.1) 207.215 ms 199.270 ms 209.391 ms # ifconfig tun6to4 tun6to4 Link encap:IPv6-in-IPv4 inet6 addr: 2002:x:x::/16 Scope:Global inet6 addr: ::x.x.x.x/128 Scope:Compat UP RUNNING NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:11 dropped:0 overruns:0 carrier:11 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) # iptunnel sit0: ipv6/ip remote any local any ttl 64 nopmtudisc tun6to4: ipv6/ip remote any local x.x.x.x ttl 64 # ip -6 route show ::/96 via :: dev tun6to4 metric 256 expires 21332777sec mtu 1480 advmss 1420 hoplimit 4294967295 2002::/16 dev tun6to4 metric 256 expires 21332794sec mtu 1480 advmss 1420 hoplimit 4294967295 fe80::/64 dev eth0 metric 256 expires 15674592sec mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth1 metric 256 expires 15674597sec mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev tun6to4 metric 256 expires 21332794sec mtu 1480 advmss 1420 hoplimit 4294967295 default via ::192.88.99.1 dev tun6to4 metric 1 expires 21332861sec mtu 1480 advmss 1420 hoplimit 4294967295 # ping6 -n -c 4 ipv6.google.com PING ipv6.google.com(2404:6800:8005::68) 56 data bytes From 2002:x:x:: icmp_seq=0 Destination unreachable: Address unreachable From 2002:x:x:: icmp_seq=1 Destination unreachable: Address unreachable From 2002:x:x:: icmp_seq=2 Destination unreachable: Address unreachable From 2002:x:x:: icmp_seq=3 Destination unreachable: Address unreachable --- ipv6.google.com ping statistics --- 4 packets transmitted, 0 received, +4 errors, 100% packet loss, time 2999ms What is my problem? Thanks,

    Read the article

  • Certain SFTP user cannot connect

    - by trobrock
    I have my Ubuntu Server set up so users with the group of sftponly can connect with sftp, but have a shell of /bin/false, and they connect to their home directories. This is working fine with three of the user accounts I have. But I added a new user account today the same way that I added the others and it will not successfully connect. sftp -vvv user@hostname debug1: Next authentication method: password user@hostname's password: debug3: packet_send2: adding 48 (len 73 padlen 7 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). debug2: fd 5 setting O_NONBLOCK debug3: fd 6 is O_NONBLOCK debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug1: channel 0: free: client-session, nchannels 1 debug3: channel 0: status: The following connections are open: #0 client-session (t3 r-1 i0/0 o0/0 fd 5/6 cfd -1) debug3: channel 0: close_fds r 5 w 6 e 7 c -1 debug1: fd 0 clearing O_NONBLOCK debug3: fd 1 is not O_NONBLOCK Connection to hostname closed by remote host. Transferred: sent 2176, received 1848 bytes, in 0.0 seconds Bytes per second: sent 127453.3, received 108241.6 debug1: Exit status -1 Connection closed For a successful user: sftp -vvv good_user@hostname debug1: Next authentication method: password good_user@hostname's password: debug3: packet_send2: adding 48 (len 63 padlen 17 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). debug2: fd 5 setting O_NONBLOCK debug3: fd 6 is O_NONBLOCK debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug1: Sending subsystem: sftp debug2: channel 0: request subsystem confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: subsystem request accepted on channel 0 debug2: Remote version: 3 debug2: Server supports extension "[email protected]" revision 1 debug2: Server supports extension "[email protected]" revision 2 debug2: Server supports extension "[email protected]" revision 2 debug3: Sent message fd 3 T:16 I:1 debug3: SSH_FXP_REALPATH . -> / sftp> I cannot figure out why one user will work and the other wont, I have restart the ssh service after adding the user. I have even removed the user and added them again to be sure I am adding it correctly.

    Read the article

  • SSH closing by itself - root works fine

    - by Antti
    I'm trying to connect to a server but if i use any other user than root the connection closes itself after a successful login: XXXXXXX:~ user$ ssh -v [email protected] OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to XXXXXXX.XXXXXX.XXX [xxx.xxx.xxx.xxx] port 22. debug1: Connection established. debug1: identity file /Users/user/.ssh/identity type -1 debug1: identity file /Users/user/.ssh/id_rsa type -1 debug1: identity file /Users/user/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3 debug1: match: OpenSSH_4.3 pat OpenSSH_4* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'XXXXXXX.XXXXXX.XXX' is known and matches the RSA host key. debug1: Found key in /Users/user/.ssh/known_hosts:12 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Next authentication method: publickey debug1: Offering public key: /Users/user/.ssh/woo_openssh debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Offering public key: /Users/user/.ssh/sidlee.dsa debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Trying private key: /Users/user/.ssh/identity debug1: Trying private key: /Users/user/.ssh/id_rsa debug1: Offering public key: /Users/user/.ssh/id_dsa debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Next authentication method: password [email protected]'s password: debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug1: Entering interactive session. Last login: Mon Mar 29 01:41:51 2010 from 193.67.179.2 debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: channel 0: free: client-session, nchannels 1 Connection to XXXXXXX.XXXXXX.XXX closed. Transferred: sent 2976, received 2136 bytes, in 0.5 seconds Bytes per second: sent 5892.2, received 4229.1 debug1: Exit status 1 If i log in as root the exact same way it works as expected. I've added the users i want to log in with to a group (sshusers) and added that group to /etc/sshd_config: AllowGroups sshusers I'm not sure what to try next as i don't get a clear error anywhere. I would like to enable specific accounts to log in so that i can disable root. This is a GridServer/Media Temple (CentOS).

    Read the article

  • Tool to sync bookmarks between devices in the local network

    - by Daps0l
    I'm looking for a tool to sync my bookmarks locally, without uploading them to any website (like xmarks does.) Example: i currently use 1Password to sync my logins/passwords. They are not uploaded to any website. The program simply syncs between devices (Mac OSX, iPad, Windows) on the local network, without the need of any remote server/database. Now i'm looking for a tool that does (kind of) the same thing, for bookmarks.

    Read the article

  • Increasing resolution in FreeNX headless server

    - by syrenity
    Hi. I'm running a FreeNX server on headless CentOS machine, and the resolution seems to be locked on 800 x 600. I tried editing the xorg.conf file, but without success so far. Has anyone succeed of running the FreeNX remote under 1280 x 1024 resolution, and can post a working configuration? Thanks! P.S.: Here is the pastebin of my current xorg.cof file: http://pastie.org/835308

    Read the article

  • BES 5.0 SSL Certificate

    - by Superfly
    I have recently installed BES 5.0 on a Hyper-V (i know it's not officially supported) 64-bit Server 2008 box with a remote SQL 2005 database. I successfully installed and was able to access the Blackberry Administration Service but was getting untrusted certificate errors so I followed the documentation for importing CA and BAS certificates with the Java keytool. They imported successfully but now the BAS webpage shows a "page cannot be displayed" error. TSupport is no help at all. Any ideas?

    Read the article

< Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >