Search Results

Search found 17859 results on 715 pages for 'static arrays'.

Page 225/715 | < Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >

• Why is my RAID /dev/md1 showing up as /dev/md126? Is mdadm.conf being ignored?

  - by mmorris

  I created a RAID with: sudo mdadm --create --verbose /dev/md1 --level=mirror --raid-devices=2 /dev/sdb1 /dev/sdc1 sudo mdadm --create --verbose /dev/md2 --level=mirror --raid-devices=2 /dev/sdb2 /dev/sdc2 sudo mdadm --detail --scan returns: ARRAY /dev/md1 metadata=1.2 name=ion:1 UUID=aa1f85b0:a2391657:cfd38029:772c560e ARRAY /dev/md2 metadata=1.2 name=ion:2 UUID=528e5385:e61eaa4c:1db2dba7:44b556fb Which I appended it to /etc/mdadm/mdadm.conf, see below: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default (built-in), scan all partitions (/proc/partitions) and all # containers for MD superblocks. alternatively, specify devices to scan, using # wildcards if desired. #DEVICE partitions containers # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays # This file was auto-generated on Mon, 29 Oct 2012 16:06:12 -0500 # by mkconf $Id$ ARRAY /dev/md1 metadata=1.2 name=ion:1 UUID=aa1f85b0:a2391657:cfd38029:772c560e ARRAY /dev/md2 metadata=1.2 name=ion:2 UUID=528e5385:e61eaa4c:1db2dba7:44b556fb cat /proc/mdstat returns: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md2 : active raid1 sdb2[0] sdc2[1] 208629632 blocks super 1.2 [2/2] [UU] md1 : active raid1 sdb1[0] sdc1[1] 767868736 blocks super 1.2 [2/2] [UU] unused devices: <none> ls -la /dev | grep md returns: brw-rw---- 1 root disk 9, 1 Oct 30 11:06 md1 brw-rw---- 1 root disk 9, 2 Oct 30 11:06 md2 So I think all is good and I reboot. After the reboot, /dev/md1 is now /dev/md126 and /dev/md2 is now /dev/md127????? sudo mdadm --detail --scan returns: ARRAY /dev/md/ion:1 metadata=1.2 name=ion:1 UUID=aa1f85b0:a2391657:cfd38029:772c560e ARRAY /dev/md/ion:2 metadata=1.2 name=ion:2 UUID=528e5385:e61eaa4c:1db2dba7:44b556fb cat /proc/mdstat returns: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md126 : active raid1 sdc2[1] sdb2[0] 208629632 blocks super 1.2 [2/2] [UU] md127 : active (auto-read-only) raid1 sdb1[0] sdc1[1] 767868736 blocks super 1.2 [2/2] [UU] unused devices: <none> ls -la /dev | grep md returns: drwxr-xr-x 2 root root 80 Oct 30 11:18 md brw-rw---- 1 root disk 9, 126 Oct 30 11:18 md126 brw-rw---- 1 root disk 9, 127 Oct 30 11:18 md127 All is not lost, I: sudo mdadm --stop /dev/md126 sudo mdadm --stop /dev/md127 sudo mdadm --assemble --verbose /dev/md1 /dev/sdb1 /dev/sdc1 sudo mdadm --assemble --verbose /dev/md2 /dev/sdb2 /dev/sdc2 and verify everything: sudo mdadm --detail --scan returns: ARRAY /dev/md1 metadata=1.2 name=ion:1 UUID=aa1f85b0:a2391657:cfd38029:772c560e ARRAY /dev/md2 metadata=1.2 name=ion:2 UUID=528e5385:e61eaa4c:1db2dba7:44b556fb cat /proc/mdstat returns: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md2 : active raid1 sdb2[0] sdc2[1] 208629632 blocks super 1.2 [2/2] [UU] md1 : active raid1 sdb1[0] sdc1[1] 767868736 blocks super 1.2 [2/2] [UU] unused devices: <none> ls -la /dev | grep md returns: brw-rw---- 1 root disk 9, 1 Oct 30 11:26 md1 brw-rw---- 1 root disk 9, 2 Oct 30 11:26 md2 So once again, I think all is good and I reboot. Again, after the reboot, /dev/md1 is /dev/md126 and /dev/md2 is /dev/md127????? sudo mdadm --detail --scan returns: ARRAY /dev/md/ion:1 metadata=1.2 name=ion:1 UUID=aa1f85b0:a2391657:cfd38029:772c560e ARRAY /dev/md/ion:2 metadata=1.2 name=ion:2 UUID=528e5385:e61eaa4c:1db2dba7:44b556fb cat /proc/mdstat returns: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md126 : active raid1 sdc2[1] sdb2[0] 208629632 blocks super 1.2 [2/2] [UU] md127 : active (auto-read-only) raid1 sdb1[0] sdc1[1] 767868736 blocks super 1.2 [2/2] [UU] unused devices: <none> ls -la /dev | grep md returns: drwxr-xr-x 2 root root 80 Oct 30 11:42 md brw-rw---- 1 root disk 9, 126 Oct 30 11:42 md126 brw-rw---- 1 root disk 9, 127 Oct 30 11:42 md127 What am I missing here?

  Read the article

• Creating ASP.NET MVC Negotiated Content Results

  - by Rick Strahl

  In a recent ASP.NET MVC application I’m involved with, we had a late in the process request to handle Content Negotiation: Returning output based on the HTTP Accept header of the incoming HTTP request. This is standard behavior in ASP.NET Web API but ASP.NET MVC doesn’t support this functionality directly out of the box. Another reason this came up in discussion is last week’s announcements of ASP.NET vNext, which seems to indicate that ASP.NET Web API is not going to be ported to the cloud version of vNext, but rather be replaced by a combined version of MVC and Web API. While it’s not clear what new API features will show up in this new framework, it’s pretty clear that the ASP.NET MVC style syntax will be the new standard for all the new combined HTTP processing framework. Why negotiated Content? Content negotiation is one of the key features of Web API even though it’s such a relatively simple thing. But it’s also something that’s missing in MVC and once you get used to automatically having your content returned based on Accept headers it’s hard to go back to manually having to create separate methods for different output types as you’ve had to with Microsoft server technologies all along (yes, yes I know other frameworks – including my own – have done this for years but for in the box features this is relatively new from Web API). As a quick review,  Accept Header content negotiation works off the request’s HTTP Accept header:POST http://localhost/mydailydosha/Editable/NegotiateContent HTTP/1.1 Content-Type: application/json Accept: application/json Host: localhost Content-Length: 76 Pragma: no-cache { ElementId: "header", PageName: "TestPage", Text: "This is a nice header" } If I make this request I would expect to get back a JSON result based on my application/json Accept header. To request XML  I‘d just change the accept header:Accept: text/xml and now I’d expect the response to come back as XML. Now this only works with media types that the server can process. In my case here I need to handle JSON, XML, HTML (using Views) and Plain Text. HTML results might need more than just a data return – you also probably need to specify a View to render the data into either by specifying the view explicitly or by using some sort of convention that can automatically locate a view to match. Today ASP.NET MVC doesn’t support this sort of automatic content switching out of the box. Unfortunately, in my application scenario we have an application that started out primarily with an AJAX backend that was implemented with JSON only. So there are lots of JSON results like this:[Route("Customers")] public ActionResult GetCustomers() { return Json(repo.GetCustomers(),JsonRequestBehavior.AllowGet); } These work fine, but they are of course JSON specific. Then a couple of weeks ago, a requirement came in that an old desktop application needs to also consume this API and it has to use XML to do it because there’s no JSON parser available for it. Ooops – stuck with JSON in this case. While it would have been easy to add XML specific methods I figured it’s easier to add basic content negotiation. And that’s what I show in this post. Missteps – IResultFilter, IActionFilter My first attempt at this was to use IResultFilter or IActionFilter which look like they would be ideal to modify result content after it’s been generated using OnResultExecuted() or OnActionExecuted(). Filters are great because they can look globally at all controller methods or individual methods that are marked up with the Filter’s attribute. But it turns out these filters don’t work for raw POCO result values from Action methods. What we wanted to do for API calls is get back to using plain .NET types as results rather than result actions. That is  you write a method that doesn’t return an ActionResult, but a standard .NET type like this:public Customer UpdateCustomer(Customer cust) { … do stuff to customer :-) return cust; } Unfortunately both OnResultExecuted and OnActionExecuted receive an MVC ContentResult instance from the POCO object. MVC basically takes any non-ActionResult return value and turns it into a ContentResult by converting the value using .ToString(). Ugh. The ContentResult itself doesn’t contain the original value, which is lost AFAIK with no way to retrieve it. So there’s no way to access the raw customer object in the example above. Bummer. Creating a NegotiatedResult This leaves mucking around with custom ActionResults. ActionResults are MVC’s standard way to return action method results – you basically specify that you would like to render your result in a specific format. Common ActionResults are ViewResults (ie. View(vn,model)), JsonResult, RedirectResult etc. They work and are fairly effective and work fairly well for testing as well as it’s the ‘standard’ interface to return results from actions. The problem with the this is mainly that you’re explicitly saying that you want a specific result output type. This works well for many things, but sometimes you do want your result to be negotiated. My first crack at this solution here is to create a simple ActionResult subclass that looks at the Accept header and based on that writes the output. I need to support JSON and XML content and HTML as well as text – so effectively 4 media types: application/json, text/xml, text/html and text/plain. Everything else is passed through as ContentResult – which effecively returns whatever .ToString() returns. Here’s what the NegotiatedResult usage looks like:public ActionResult GetCustomers() { return new NegotiatedResult(repo.GetCustomers()); } public ActionResult GetCustomer(int id) { return new NegotiatedResult("Show", repo.GetCustomer(id)); } There are two overloads of this method – one that returns just the raw result value and a second version that accepts an optional view name. The second version returns the Razor view specified only if text/html is requested – otherwise the raw data is returned. This is useful in applications where you have an HTML front end that can also double as an API interface endpoint that’s using the same model data you send to the View. For the application I mentioned above this was another actual use-case we needed to address so this was a welcome side effect of creating a custom ActionResult. There’s also an extension method that directly attaches a Negotiated() method to the controller using the same syntax:public ActionResult GetCustomers() { return this.Negotiated(repo.GetCustomers()); } public ActionResult GetCustomer(int id) { return this.Negotiated("Show",repo.GetCustomer(id)); } Using either of these mechanisms now allows you to return JSON, XML, HTML or plain text results depending on the Accept header sent. Send application/json you get just the Customer JSON data. Ditto for text/xml and XML data. Pass text/html for the Accept header and the "Show.cshtml" Razor view is rendered passing the result model data producing final HTML output. While this isn’t as clean as passing just POCO objects back as I had intended originally, this approach fits better with how MVC action methods are intended to be used and we get the bonus of being able to specify a View to render (optionally) for HTML. How does it work An ActionResult implementation is pretty straightforward. You inherit from ActionResult and implement the ExecuteResult method to send your output to the ASP.NET output stream. ActionFilters are an easy way to effectively do post processing on ASP.NET MVC controller actions just before the content is sent to the output stream, assuming your specific action result was used. Here’s the full code to the NegotiatedResult class (you can also check it out on GitHub):/// <summary> /// Returns a content negotiated result based on the Accept header. /// Minimal implementation that works with JSON and XML content, /// can also optionally return a view with HTML. /// </summary> /// <example> /// // model data only /// public ActionResult GetCustomers() /// { /// return new NegotiatedResult(repo.Customers.OrderBy( c=> c.Company) ) /// } /// // optional view for HTML /// public ActionResult GetCustomers() /// { /// return new NegotiatedResult("List", repo.Customers.OrderBy( c=> c.Company) ) /// } /// </example> public class NegotiatedResult : ActionResult { /// <summary> /// Data stored to be 'serialized'. Public /// so it's potentially accessible in filters. /// </summary> public object Data { get; set; } /// <summary> /// Optional name of the HTML view to be rendered /// for HTML responses /// </summary> public string ViewName { get; set; } public static bool FormatOutput { get; set; } static NegotiatedResult() { FormatOutput = HttpContext.Current.IsDebuggingEnabled; } /// <summary> /// Pass in data to serialize /// </summary> /// <param name="data">Data to serialize</param> public NegotiatedResult(object data) { Data = data; } /// <summary> /// Pass in data and an optional view for HTML views /// </summary> /// <param name="data"></param> /// <param name="viewName"></param> public NegotiatedResult(string viewName, object data) { Data = data; ViewName = viewName; } public override void ExecuteResult(ControllerContext context) { if (context == null) throw new ArgumentNullException("context"); HttpResponseBase response = context.HttpContext.Response; HttpRequestBase request = context.HttpContext.Request; // Look for specific content types if (request.AcceptTypes.Contains("text/html")) { response.ContentType = "text/html"; if (!string.IsNullOrEmpty(ViewName)) { var viewData = context.Controller.ViewData; viewData.Model = Data; var viewResult = new ViewResult { ViewName = ViewName, MasterName = null, ViewData = viewData, TempData = context.Controller.TempData, ViewEngineCollection = ((Controller)context.Controller).ViewEngineCollection }; viewResult.ExecuteResult(context.Controller.ControllerContext); } else response.Write(Data); } else if (request.AcceptTypes.Contains("text/plain")) { response.ContentType = "text/plain"; response.Write(Data); } else if (request.AcceptTypes.Contains("application/json")) { using (JsonTextWriter writer = new JsonTextWriter(response.Output)) { var settings = new JsonSerializerSettings(); if (FormatOutput) settings.Formatting = Newtonsoft.Json.Formatting.Indented; JsonSerializer serializer = JsonSerializer.Create(settings); serializer.Serialize(writer, Data); writer.Flush(); } } else if (request.AcceptTypes.Contains("text/xml")) { response.ContentType = "text/xml"; if (Data != null) { using (var writer = new XmlTextWriter(response.OutputStream, new UTF8Encoding())) { if (FormatOutput) writer.Formatting = System.Xml.Formatting.Indented; XmlSerializer serializer = new XmlSerializer(Data.GetType()); serializer.Serialize(writer, Data); writer.Flush(); } } } else { // just write data as a plain string response.Write(Data); } } } /// <summary> /// Extends Controller with Negotiated() ActionResult that does /// basic content negotiation based on the Accept header. /// </summary> public static class NegotiatedResultExtensions { /// <summary> /// Return content-negotiated content of the data based on Accept header. /// Supports: /// application/json - using JSON.NET /// text/xml - Xml as XmlSerializer XML /// text/html - as text, or an optional View /// text/plain - as text /// </summary> /// <param name="controller"></param> /// <param name="data">Data to return</param> /// <returns>serialized data</returns> /// <example> /// public ActionResult GetCustomers() /// { /// return this.Negotiated( repo.Customers.OrderBy( c=> c.Company) ) /// } /// </example> public static NegotiatedResult Negotiated(this Controller controller, object data) { return new NegotiatedResult(data); } /// <summary> /// Return content-negotiated content of the data based on Accept header. /// Supports: /// application/json - using JSON.NET /// text/xml - Xml as XmlSerializer XML /// text/html - as text, or an optional View /// text/plain - as text /// </summary> /// <param name="controller"></param> /// <param name="viewName">Name of the View to when Accept is text/html</param> /// /// <param name="data">Data to return</param> /// <returns>serialized data</returns> /// <example> /// public ActionResult GetCustomers() /// { /// return this.Negotiated("List", repo.Customers.OrderBy( c=> c.Company) ) /// } /// </example> public static NegotiatedResult Negotiated(this Controller controller, string viewName, object data) { return new NegotiatedResult(viewName, data); } } Output Generation – JSON and XML Generating output for XML and JSON is simple – you use the desired serializer and off you go. Using XmlSerializer and JSON.NET it’s just a handful of lines each to generate serialized output directly into the HTTP output stream. Please note this implementation uses JSON.NET for its JSON generation rather than the default JavaScriptSerializer that MVC uses which I feel is an additional bonus to implementing this custom action. I’d already been using a custom JsonNetResult class previously, but now this is just rolled into this custom ActionResult. Just keep in mind that JSON.NET outputs slightly different JSON for certain things like collections for example, so behavior may change. One addition to this implementation might be a flag to allow switching the JSON serializer. Html View Generation Html View generation actually turned out to be easier than anticipated. Initially I used my generic ASP.NET ViewRenderer Class that can render MVC views from any ASP.NET application. However it turns out since we are executing inside of an active MVC request there’s an easier way: We can simply create a custom ViewResult and populate its members and then execute it. The code in text/html handling code that renders the view is simply this:response.ContentType = "text/html"; if (!string.IsNullOrEmpty(ViewName)) { var viewData = context.Controller.ViewData; viewData.Model = Data; var viewResult = new ViewResult { ViewName = ViewName, MasterName = null, ViewData = viewData, TempData = context.Controller.TempData, ViewEngineCollection = ((Controller)context.Controller).ViewEngineCollection }; viewResult.ExecuteResult(context.Controller.ControllerContext); } else response.Write(Data); which is a neat and easy way to render a Razor view assuming you have an active controller that’s ready for rendering. Sweet – dependency removed which makes this class self-contained without any external dependencies other than JSON.NET. Summary While this isn’t exactly a new topic, it’s the first time I’ve actually delved into this with MVC. I’ve been doing content negotiation with Web API and prior to that with my REST library. This is the first time it’s come up as an issue in MVC. But as I have worked through this I find that having a way to specify both HTML Views *and* JSON and XML results from a single controller certainly is appealing to me in many situations as we are in this particular application returning identical data models for each of these operations. Rendering content negotiated views is something that I hope ASP.NET vNext will provide natively in the combined MVC and WebAPI model, but we’ll see how this actually will be implemented. In the meantime having a custom ActionResult that provides this functionality is a workable and easily adaptable way of handling this going forward. Whatever ends up happening in ASP.NET vNext the abstraction can probably be changed to support the native features of the future. Anyway I hope some of you found this useful if not for direct integration then as insight into some of the rendering logic that MVC uses to get output into the HTTP stream… Related Resources Latest Version of NegotiatedResult.cs on GitHub Understanding Action Controllers Rendering ASP.NET Views To String© Rick Strahl, West Wind Technologies, 2005-2014Posted in MVC  ASP.NET  HTTP   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Strange enduser experience with Liferay, Glassfish and Apache on RedHat

  - by Pete Helgren

  Tried multiple forums to get to the bottom of this. I hope I can get some direction here: Here is the stack I am working with: Red Hat Enterprise Linux Server release 5.6 (Tikanga) Liferay 6.0.6 on Glassfish 3.0.1 MySQL 5.0.77 Apache 2.2.3 The Liferay portal provides a variety of portlets to end users. Static content (web pages), static resources (primarily pdf and mp3 files 1mb - 80mb in size), File upload and download capabilities (primarily 40-60mb mp3 files) and online streaming of those MP3 files. Here is the strange end user experiences: Under normal load: (20-30) users uploading, downloading or streaming files and 20-30 accessing static content (some of it downloads), we see the following: 1) Clicking a link triggers the download of a portion of an MP3 (the portion is a few seconds long). 2) Clicking on a link tiggers the download of the page content rather than rendering. 3) Clicking a link causes the page to dump binary data to the end user rather than the expected content. 4) Clicking a link returns the text of a javascript file rather than rendering the page. Each occurrence is totally random (or appears so). Sometimes it works, sometimes it doesn't. It seems to have no relation to browser or client OS. The strange events seem to occur much more frequently when using an SSL connection rather than regular http. Apache serves as a proxy server only (reverse). It basically passes all the requests through to Glassfish. There isn't any static content proxy served by Apache. We rebuilt the entire stack from scratch and redeployed the portlet wars and still have the same issues. Liferay is running as a single server (not clustered). We disabled mod_cache in Apache. The problems are more frequent as the server load grows. This morning the load is pretty light and we are seeing few problems but the use of the site will grow, particularly tonight around 9pm CST through Wednesday morning. You could try the site (http://preview.bsfinternational.org) during those times and I would expect that you might experience one of the weirdnesses as you randomly click links on the site (https is invoked only when signed in). Again, https seems to exacerbate the issue. This seems very much like a caching issue but I don't know where in the stack to start peeling the onion. Apache? Liferay? Glassfish? MySQL? Maybe even Redhat? We are stumped and most forums we have posted to (LifeRay and Glassfish) have returned very few suggestions. I just need an idea of where to start looking. I understand that we could have a portlet EDIT: Opening the files in a Hex editor that appear to be pages that download rather than render, we see that the first 4000 characters are "junk" and then the "HTTP/1.1 ...." 'normal' header is seen. So something is dumping a jumble of characters up to offset 4000 (when viewing it in a Hex editor). Perhaps a clue? Ideas?

  Read the article

• Anatomy of a .NET Assembly - Signature encodings

  - by Simon Cooper

  If you've just joined this series, I highly recommend you read the previous posts in this series, starting here, or at least these posts, covering the CLR metadata tables. Before we look at custom attribute encoding, we first need to have a brief look at how signatures are encoded in an assembly in general. Signature types There are several types of signatures in an assembly, all of which share a common base representation, and are all stored as binary blobs in the #Blob heap, referenced by an offset from various metadata tables. The types of signatures are: Method definition and method reference signatures. Field signatures Property signatures Method local variables. These are referenced from the StandAloneSig table, which is then referenced by method body headers. Generic type specifications. These represent a particular instantiation of a generic type. Generic method specifications. Similarly, these represent a particular instantiation of a generic method. All these signatures share the same underlying mechanism to represent a type Representing a type All metadata signatures are based around the ELEMENT_TYPE structure. This assigns a number to each 'built-in' type in the framework; for example, Uint16 is 0x07, String is 0x0e, and Object is 0x1c. Byte codes are also used to indicate SzArrays, multi-dimensional arrays, custom types, and generic type and method variables. However, these require some further information. Firstly, custom types (ie not one of the built-in types). These require you to specify the 4-byte TypeDefOrRef coded token after the CLASS (0x12) or VALUETYPE (0x11) element type. This 4-byte value is stored in a compressed format before being written out to disk (for more excruciating details, you can refer to the CLI specification). SzArrays simply have the array item type after the SZARRAY byte (0x1d). Multidimensional arrays follow the ARRAY element type with a series of compressed integers indicating the number of dimensions, and the size and lower bound of each dimension. Generic variables are simply followed by the index of the generic variable they refer to. There are other additions as well, for example, a specific byte value indicates a method parameter passed by reference (BYREF), and other values indicating custom modifiers. Some examples... To demonstrate, here's a few examples and what the resulting blobs in the #Blob heap will look like. Each name in capitals corresponds to a particular byte value in the ELEMENT_TYPE or CALLCONV structure, and coded tokens to custom types are represented by the type name in curly brackets. A simple field: int intField; FIELD I4 A field of an array of a generic type parameter (assuming T is the first generic parameter of the containing type): T[] genArrayField FIELD SZARRAY VAR 0 An instance method signature (note how the number of parameters does not include the return type): instance string MyMethod(MyType, int&, bool[][]); HASTHIS DEFAULT 3 STRING CLASS {MyType} BYREF I4 SZARRAY SZARRAY BOOLEAN A generic type instantiation: MyGenericType<MyType, MyStruct> GENERICINST CLASS {MyGenericType} 2 CLASS {MyType} VALUETYPE {MyStruct} For more complicated examples, in the following C# type declaration: GenericType<T> : GenericBaseType<object[], T, GenericType<T>> { ... } the Extends field of the TypeDef for GenericType will point to a TypeSpec with the following blob: GENERICINST CLASS {GenericBaseType} 3 SZARRAY OBJECT VAR 0 GENERICINST CLASS {GenericType} 1 VAR 0 And a static generic method signature (generic parameters on types are referenced using VAR, generic parameters on methods using MVAR): TResult[] GenericMethod<TInput, TResult>( TInput, System.Converter<TInput, TOutput>); GENERIC 2 2 SZARRAY MVAR 1 MVAR 0 GENERICINST CLASS {System.Converter} 2 MVAR 0 MVAR 1 As you can see, complicated signatures are recursively built up out of quite simple building blocks to represent all the possible variations in a .NET assembly. Now we've looked at the basics of normal method signatures, in my next post I'll look at custom attribute application signatures, and how they are different to normal signatures.

  Read the article

• Creating Item Templates as Visual Studio 2010 Extensions

  - by maziar

  Technorati Tags: Visual Studio 2010 Extension,T4 Template,VSIX,Item Template Wizard This blog post briefly introduces creation of an item template as a Visual studio 2010 extension. Problem specification Assume you are writing a Framework for data-oriented applications and you decide to include all your application messages in a SQL server database table. After creating the table, your create a class in your framework for getting messages with a string key specified.   var message = FrameworkMessages.Get("ChangesSavedSuccess");   Everyone would say this code is so error prone, because message keys are not strong-typed, and might create errors in application that are not caught in tests. So we think of a way to make it strong-typed, i.e. create a class to use it like this:   var message = Messages.ChangesSavedSuccess; in Messages class the code looks like this: public string ChangesSavedSuccess {     get { return FrameworkMessages.Get("ChangesSavedSuccess"); } }   And clearly, we are not going to create the Messages class manually; we need a class generator for it.   Again assume that the application(s) that intend to use our framework, contain multiple sub-systems. So each sub-system need to have it’s own strong-typed message class that call FrameworkMessages.Get method. So we would like to make our code generator an Item Template so that each developer would easily add the item to his project and no other works would be necessary.   Solution We create a T4 Text Template to generate our strong typed class from database. Then create a Visual Studio Item Template with this generator and publish it.   What Are T4 Templates You might be already familiar with T4 templates. If it’s so, you can skip this section. T4 Text Template is a fine Visual Studio file type (.tt) that generates output text. This file is a mixture of text blocks and code logic (in C# or VB). For example, you can generate HTML files, C# classes, Resource files and etc with use of a T4 template.   Syntax highlighting In Visual Studio 2010 a T4 Template by default will no be syntax highlighted and no auto-complete is supported for it. But there is a fine visual studio extension named ‘Visual T4’ which can be downloaded free from VisualStudioGallery. This tool offers IntelliSense, syntax coloring, validation, transformation preview and more for T4 templates.     How Item Templates work in Visual Studio Visual studio extensions allow us to add some functionalities to visual studio. In our case we need to create a .vsix file that adds a template to visual studio item templates. Item templates are zip files containing the template file and a meta-data file with .vstemplate extension. This .vstemplate file is an XML file that provides some information about the template. A .vsix file also is a zip file (renamed to .vsix) that are open with visual studio extension installer. (Re-installing a vsix file requires that old one to be uninstalled from VS: Tools > Extension Manager.) Installing a vsix will need Visual Studio to be closed and re-opened to take effect. Visual studio extension installer will easily find the item template’s zip file and copy it to visual studio’s template items folder. You can find other visual studio templates in [<VS Install Path>\Common7\IDE\ItemTemplates] and you can edit them; but be very careful with VS default templates.   How Can I Create a VSIX file 1. Visual Studio SDK depending on your Visual Studio’s version, you need to download Microsoft Visual Studio SDK. Note that if you have VS 2010 SP1, you will need to download and install VS 2010 SP1 SDK; VS 2010 SDK will not be installed (unless you change registry value that indicated your service pack number). Here is the link for VS 2010 SP1 SDK. After downloading, Run it and follow the wizard to complete the installation.   2. Create the file you want to make it an Item Template Create a project (or use an existing one) and add you file, edit it to make it work fine.   Back to our own problem, we need to create a T4 (.tt) template. VS-Prok: Add > New Item > General > Text Template Type a file name, ex. Message.tt, and press Add. Create the T4 template file (in this blog I do not intend to include T4 syntaxes so I just write down the code which is clear enough for you to understand)   <#@ template debug="false" hostspecific="true" language="C#" #> <#@ output extension=".cs" #> <#@ Assembly Name="System.Data" #> <#@ Import Namespace="System.Data.SqlClient" #> <#@ Import Namespace="System.Text" #> <#@ Import Namespace="System.IO" #> <#     var connectionString = "server=Maziar-PC; Database=MyDatabase; Integrated Security=True";     var systemName = "Sys1";     var builder = new StringBuilder();     using (var connection = new SqlConnection(connectionString))     {         connection.Open();         var command = connection.CreateCommand();         command.CommandText = string.Format("SELECT [Key] FROM [Message] WHERE System = '{0}'", systemName);         var reader = command.ExecuteReader();         while (reader.Read())         {             builder.AppendFormat("        public static string {0} {{ get {{ return FrameworkMessages.Get(\"{0}\"); }} }}\r\n", reader[0]);         }     } #> namespace <#= System.Runtime.Remoting.Messaging.CallContext.LogicalGetData("NamespaceHint") #> {     public static class <#= Path.GetFileNameWithoutExtension(Host.TemplateFile) #>     { <#= builder.ToString() #>     } } As you can see the T4 template connects to a database, reads message keys and generates a class. Here is the output: namespace MyProject.MyFolder {     public static class Messages     {         public static string ChangesSavedSuccess { get { return FrameworkMessages.Get("ChangesSavedSuccess"); } }         public static string ErrorSavingChanges { get { return FrameworkMessages.Get("ErrorSavingChanges"); } }     } }   The output looks fine but there is one problem. The connectionString and systemName are hard coded. so how can I create an flexible item template? One of features of item templates in visual studio is that you can create a designer wizard for your item template, so I can get connection information and system name there. now lets go on creating the vsix file.   3. Create Template In visual studio click on File > Export Template a wizard will show up. if first step click on Item Template on in the combo box select the project that contains Messages.tt. click next. Select Messages.tt from list in second step. click next. In the third step, you should choose References. For this template, System and System.Data are needed so choose them. click next. write down template name, description, if you like add a .ico file as the icon file and also preview image. Uncheck automatically add the templare … . Copy the output location in clip board. click finish.     4. Create VSIX Project In VS, Click File > New > Project > Extensibility > VSIX Project Type a name, ex. FrameworkMessages, Location, etc. The project will include a .vsixmanifest file. Fill in fields like Author, Product Name, Description, etc.   In Content section, click on Add Content. choose content type as Item Template. choose source as file. remember you have the template file address in clipboard? now paste it in front of file. click OK.     5. Build VSIX Project That’s it, build the project and go to output directory. You see a .vsix file. you can run it now. After restarting VS, if you click on a project > Add > New Item, you will see your item in list and you can add it. When you add this item to a project, if it has not references to System and System.Data they will be added. but the problem mentioned in step 2 is seen now.     6. Create Design Wizard for your Item Template Create a project i.e. Windows Application named ‘Framework.Messages.Design’, but better change its output type to Class Library. Add References to Microsoft.VisualStudio.TemplateWizardInterface and envdte Add a class Named MessagesDesigner in your project and Implement IWizard interface in it. This is what you should write: using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.VisualStudio.TemplateWizard; using EnvDTE; namespace Framework.Messages.Design {     class MessageDesigner : IWizard     {         private bool CanAddProjectItem;         public void RunStarted(object automationObject, Dictionary<string, string> replacementsDictionary, WizardRunKind runKind, object[] customParams)         {             // Prompt user for Connection String and System Name in a Windows form (ShowDialog) here             // (try to provide good interface)             // if user clicks on cancel of your windows form return;             string connectionString = "connection;string"; // Set value from the form             string systemName = "system;name"; // Set value from the form             CanAddProjectItem = true;             replacementsDictionary.Add("$connectionString$", connectionString);             replacementsDictionary.Add("$systemName$", systemName);         }         public bool ShouldAddProjectItem(string filePath)         {             return CanAddProjectItem;         }         public void BeforeOpeningFile(ProjectItem projectItem)         {         }         public void ProjectFinishedGenerating(Project project)         {         }         public void ProjectItemFinishedGenerating(ProjectItem projectItem)         {         }         public void RunFinished()         {         }     } }   before your code runs  replacementsDictionary contains list of default template parameters. After that, two other parameters are added. Now build this project and copy the output assembly to [<VS Install Path>\Common7\IDE] folder.   your designer is ready.     The template that you had created is now added to your VSIX project. In windows explorer open your template zip file (extract it somewhere). open the .vstemplate file. first of all remove <ProjectItem SubType="Code" TargetFileName="$fileinputname$.cs" ReplaceParameters="true">Messages.cs</ProjectItem> because the .cs file is not to be intended to be a part of template and it will be generated. change value of ReplaceParameters for your .tt file to true to enable parameter replacement in this file. now right after </TemplateContent> end element, write this: <WizardExtension>   <Assembly>Framework.Messages.Design</Assembly>   <FullClassName>Framework.Messages.Design.MessageDesigner</FullClassName> </WizardExtension>   one other thing that you should do is to edit your .tt file and remove your .cs file. Lines 8 and 9 of your .tt file should be:     var connectionString = "$connectionString$";     var systemName = "$systemName$"; this parameters will be replaced when the item is added to a project. Save the contents to a zip file with same file name and replace the original file.   now again build your VSIX project, uninstall your extension. close VS. now run .vsix file. open vs, add an item of type messages to your project, bingo, your wizard form will show up. fill the fields and click ok, values are replaced in .tt file added.     that’s it. tried so hard to make this post brief, hope it was not so long…   Cheers Maziar

  Read the article

• Simple Cisco ASA 5505 config issue

  - by Ben Sebborn

  I have a Cisco ASA setup with two interfaces: inside: 192.168.2.254 / 255.255.255.0 SecLevel:100 outside: 192.168.3.250 / 255.255.255.0 SecLevel: 0 I have a static route setup to allow PCs on the inside network to access the internet via a gateway on the outside interface (3.254): outside 0.0.0.0 0.0.0.0 192.168.3.254 This all works fine. I now need to be able to access a PC on the outside interface (3.253) from a PC on the inside interface on port 35300. I understand I should be able to do this with no problems, as I'm going from a higher security level to a lower one. However I can't get any connection. Do I need to set up a seperate static route? Perhaps the route above is overriding what I need to be able to do (is it routing ALL traffic through the gateway?) Any advice on how to do this would be apprecaited. I am configuring this via ASDM but the config can be seen as below: Result of the command: "show running-config" : Saved : ASA Version 8.2(5) ! hostname ciscoasa domain-name xxx.internal names name 192.168.2.201 dev.xxx.internal description Internal Dev server name 192.168.2.200 Newserver ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 shutdown ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! interface Vlan1 nameif inside security-level 100 ip address 192.168.2.254 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address 192.168.3.250 255.255.255.0 ! ! time-range Workingtime periodic weekdays 9:00 to 18:00 ! ftp mode passive clock timezone GMT/BST 0 clock summer-time GMT/BDT recurring last Sun Mar 1:00 last Sun Oct 2:00 dns domain-lookup inside dns server-group DefaultDNS name-server Newserver domain-name xxx.internal same-security-traffic permit inter-interface object-group service Mysql tcp port-object eq 3306 object-group protocol TCPUDP protocol-object udp protocol-object tcp access-list inside_access_in extended permit ip any any access-list outside_access_in remark ENABLES OUTSDIE ACCESS TO DEV SERVER! access-list outside_access_in extended permit tcp any interface outside eq www time-range Workingtime inactive access-list outside_access_in extended permit tcp host www-1.xxx.com interface outside eq ssh access-list inside_access_in_1 extended permit tcp any any eq www access-list inside_access_in_1 extended permit tcp any any eq https access-list inside_access_in_1 remark Connect to SSH services access-list inside_access_in_1 extended permit tcp any any eq ssh access-list inside_access_in_1 remark Connect to mysql server access-list inside_access_in_1 extended permit tcp any host mysql.xxx.com object-group Mysql access-list inside_access_in_1 extended permit tcp any host mysql.xxx.com eq 3312 access-list inside_access_in_1 extended permit object-group TCPUDP host Newserver any eq domain access-list inside_access_in_1 extended permit icmp any any access-list inside_access_in_1 remark Draytek Admin access-list inside_access_in_1 extended permit tcp any 192.168.3.0 255.255.255.0 eq 4433 access-list inside_access_in_1 remark Phone System access-list inside_access_in_1 extended permit tcp any 192.168.3.0 255.255.255.0 eq 35300 log disable pager lines 24 logging enable logging asdm warnings logging from-address [email protected] logging recipient-address [email protected] level errors mtu inside 1500 mtu outside 1500 ip verify reverse-path interface inside ip verify reverse-path interface outside ipv6 access-list inside_access_ipv6_in permit tcp any any eq www ipv6 access-list inside_access_ipv6_in permit tcp any any eq https ipv6 access-list inside_access_ipv6_in permit tcp any any eq ssh ipv6 access-list inside_access_ipv6_in permit icmp6 any any icmp unreachable rate-limit 1 burst-size 1 icmp permit any outside no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www dev.xxx.internal www netmask 255.255.255.255 static (inside,outside) tcp interface ssh dev.xxx.internal ssh netmask 255.255.255.255 access-group inside_access_in in interface inside control-plane access-group inside_access_in_1 in interface inside access-group inside_access_ipv6_in in interface inside access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 192.168.3.254 10 route outside 192.168.3.252 255.255.255.255 192.168.3.252 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication telnet console LOCAL aaa authentication enable console LOCAL

  Read the article

• A first look at ConfORM - Part 1

  - by thangchung

  All source codes for this post can be found at here.Have you ever heard of ConfORM is not? I have read it three months ago when I wrote an post about NHibernate and Autofac. At that time, this project really has just started and still in beta version, so I still do not really care much. But recently when reading a book by Jason Dentler NHibernate 3.0 Cookbook, I started to pay attention to it. Author have mentioned quite a lot of OSS in his book. And now again I have reviewed ConfORM once again. I have been involved in ConfORM development group on google and read some articles about it. Fabio Maulo spent a lot of work for the OSS, and I hope it will adapt a great way for NHibernate (because he contributed to NHibernate that). So what is ConfORM? It is stand for Configuration ORM, and it was trying to use a lot of heuristic model for identifying entities from C# code. Today, it's mostly Model First Driven development, so the first thing is to build the entity model. This is really important and we can see it is the heart of business software. Then we have to tell DB about the entity of this model. We often will use Inversion Engineering here, Database Schema is will create based on recently Entity Model. From now we will absolutely not interested in the DB again, only focus on the Entity Model.Fluent NHibenate really good, I liked this OSS. Sharp Architecture and has done so well in Fluent NHibernate integration with applications. A Multiple Database technical in Sharp Architecture is truly awesome. It can receive configuration, a connection string and a dll containing entity model, which would then create a SessionFactory, finally caching inside the computer memory. As the number of SessionFactory can be very large and will full of the memory, it has also devised a way of caching SessionFactory in the file. This post I hope this will not completely explain about and building a model of multiple databases. I just tried to mount a number of posts from the community and apply some of my knowledge to build a management model Session for ConfORM.As well as Fluent NHibernate, ConfORM also supported on the interface mapping, see this to understand it. So the first thing we will build the Entity Model for it, and here is what I will use the model for this article. A simple model for managing news and polls, it will be too easy for a number of people, but I hope not to bring complexity to this post.I will then have some code to build super type for the Entity Model. public interface IEntity<TId>    {        TId Id { get; set; }    } public abstract class EntityBase<TId> : IEntity<TId>    {        public virtual TId Id { get; set; }         public override bool Equals(object obj)        {            return Equals(obj as EntityBase<TId>);        }         private static bool IsTransient(EntityBase<TId> obj)        {            return obj != null &&            Equals(obj.Id, default(TId));        }         private Type GetUnproxiedType()        {            return GetType();        }         public virtual bool Equals(EntityBase<TId> other)        {            if (other == null)                return false;            if (ReferenceEquals(this, other))                return true;            if (!IsTransient(this) &&            !IsTransient(other) &&            Equals(Id, other.Id))            {                var otherType = other.GetUnproxiedType();                var thisType = GetUnproxiedType();                return thisType.IsAssignableFrom(otherType) ||                otherType.IsAssignableFrom(thisType);            }            return false;        }         public override int GetHashCode()        {            if (Equals(Id, default(TId)))                return base.GetHashCode();            return Id.GetHashCode();        }    } Database schema will be created as:The next step is to build the ConORM builder to create a NHibernate Configuration. Patrick have a excellent article about it at here. Contract of it below: public interface IConfigBuilder    {        Configuration BuildConfiguration(string connectionString, string sessionFactoryName);    } The idea here is that I will pass in a connection string and a set of the DLL containing the Entity Model and it makes me a NHibernate Configuration (shame that I stole this ideas of Sharp Architecture). And here is its code: public abstract class ConfORMConfigBuilder : RootObject, IConfigBuilder    {        private static IConfigurator _configurator;         protected IEnumerable<Type> DomainTypes;         private readonly IEnumerable<string> _assemblies;         protected ConfORMConfigBuilder(IEnumerable<string> assemblies)            : this(new Configurator(), assemblies)        {            _assemblies = assemblies;        }         protected ConfORMConfigBuilder(IConfigurator configurator, IEnumerable<string> assemblies)        {            _configurator = configurator;            _assemblies = assemblies;        }         public abstract void GetDatabaseIntegration(IDbIntegrationConfigurationProperties dBIntegration, string connectionString);         protected abstract HbmMapping GetMapping();         public Configuration BuildConfiguration(string connectionString, string sessionFactoryName)        {            Contract.Requires(!string.IsNullOrEmpty(connectionString), "ConnectionString is null or empty");            Contract.Requires(!string.IsNullOrEmpty(sessionFactoryName), "SessionFactory name is null or empty");            Contract.Requires(_configurator != null, "Configurator is null");             return CatchExceptionHelper.TryCatchFunction(                () =>                {                    DomainTypes = GetTypeOfEntities(_assemblies);                     if (DomainTypes == null)                        throw new Exception("Type of domains is null");                     var configure = new Configuration();                    configure.SessionFactoryName(sessionFactoryName);                     configure.Proxy(p => p.ProxyFactoryFactory<ProxyFactoryFactory>());                    configure.DataBaseIntegration(db => GetDatabaseIntegration(db, connectionString));                     if (_configurator.GetAppSettingString("IsCreateNewDatabase").ConvertToBoolean())                    {                        configure.SetProperty("hbm2ddl.auto", "create-drop");                    }                     configure.Properties.Add("default_schema", _configurator.GetAppSettingString("DefaultSchema"));                    configure.AddDeserializedMapping(GetMapping(),                                                     _configurator.GetAppSettingString("DocumentFileName"));                     SchemaMetadataUpdater.QuoteTableAndColumns(configure);                     return configure;                }, Logger);        }         protected IEnumerable<Type> GetTypeOfEntities(IEnumerable<string> assemblies)        {            var type = typeof(EntityBase<Guid>);            var domainTypes = new List<Type>();             foreach (var assembly in assemblies)            {                var realAssembly = Assembly.LoadFrom(assembly);                 if (realAssembly == null)                    throw new NullReferenceException();                 domainTypes.AddRange(realAssembly.GetTypes().Where(                    t =>                    {                        if (t.BaseType != null)                            return string.Compare(t.BaseType.FullName,                                          type.FullName) == 0;                        return false;                    }));            }             return domainTypes;        }    } I do not want to dependency on any RDBMS, so I made a builder as an abstract class, and so I will create a concrete instance for SQL Server 2008 as follows: public class SqlServerConfORMConfigBuilder : ConfORMConfigBuilder    {        public SqlServerConfORMConfigBuilder(IEnumerable<string> assemblies)            : base(assemblies)        {        }         public override void GetDatabaseIntegration(IDbIntegrationConfigurationProperties dBIntegration, string connectionString)        {            dBIntegration.Dialect<MsSql2008Dialect>();            dBIntegration.Driver<SqlClientDriver>();            dBIntegration.KeywordsAutoImport = Hbm2DDLKeyWords.AutoQuote;            dBIntegration.IsolationLevel = IsolationLevel.ReadCommitted;            dBIntegration.ConnectionString = connectionString;            dBIntegration.LogSqlInConsole = true;            dBIntegration.Timeout = 10;            dBIntegration.LogFormatedSql = true;            dBIntegration.HqlToSqlSubstitutions = "true 1, false 0, yes 'Y', no 'N'";        }         protected override HbmMapping GetMapping()        {            var orm = new ObjectRelationalMapper();             orm.Patterns.PoidStrategies.Add(new GuidPoidPattern());             var patternsAppliers = new CoolPatternsAppliersHolder(orm);            //patternsAppliers.Merge(new DatePropertyByNameApplier()).Merge(new MsSQL2008DateTimeApplier());            patternsAppliers.Merge(new ManyToOneColumnNamingApplier());            patternsAppliers.Merge(new OneToManyKeyColumnNamingApplier(orm));             var mapper = new Mapper(orm, patternsAppliers);             var entities = new List<Type>();             DomainDefinition(orm);            Customize(mapper);             entities.AddRange(DomainTypes);             return mapper.CompileMappingFor(entities);        }         private void DomainDefinition(IObjectRelationalMapper orm)        {            orm.TablePerClassHierarchy(new[] { typeof(EntityBase<Guid>) });            orm.TablePerClass(DomainTypes);             orm.OneToOne<News, Poll>();            orm.ManyToOne<Category, News>();             orm.Cascade<Category, News>(Cascade.All);            orm.Cascade<News, Poll>(Cascade.All);            orm.Cascade<User, Poll>(Cascade.All);        }         private static void Customize(Mapper mapper)        {            CustomizeRelations(mapper);            CustomizeTables(mapper);            CustomizeColumns(mapper);        }         private static void CustomizeRelations(Mapper mapper)        {        }         private static void CustomizeTables(Mapper mapper)        {        }         private static void CustomizeColumns(Mapper mapper)        {            mapper.Class<Category>(                cm =>                {                    cm.Property(x => x.Name, m => m.NotNullable(true));                    cm.Property(x => x.CreatedDate, m => m.NotNullable(true));                });             mapper.Class<News>(                cm =>                {                    cm.Property(x => x.Title, m => m.NotNullable(true));                    cm.Property(x => x.ShortDescription, m => m.NotNullable(true));                    cm.Property(x => x.Content, m => m.NotNullable(true));                });             mapper.Class<Poll>(                cm =>                {                    cm.Property(x => x.Value, m => m.NotNullable(true));                    cm.Property(x => x.VoteDate, m => m.NotNullable(true));                    cm.Property(x => x.WhoVote, m => m.NotNullable(true));                });             mapper.Class<User>(                cm =>                {                    cm.Property(x => x.UserName, m => m.NotNullable(true));                    cm.Property(x => x.Password, m => m.NotNullable(true));                });        }    } As you can see that we can do so many things in this class, such as custom entity relationships, custom binding on the columns, custom table name, ... Here I only made two so-Appliers for OneToMany and ManyToOne relationships, you can refer to it here public class ManyToOneColumnNamingApplier : IPatternApplier<PropertyPath, IManyToOneMapper>    {        #region IPatternApplier<PropertyPath,IManyToOneMapper> Members         public void Apply(PropertyPath subject, IManyToOneMapper applyTo)        {            applyTo.Column(subject.ToColumnName() + "Id");        }         #endregion         #region IPattern<PropertyPath> Members         public bool Match(PropertyPath subject)        {            return subject != null;        }         #endregion    } public class OneToManyKeyColumnNamingApplier : OneToManyPattern, IPatternApplier<PropertyPath, ICollectionPropertiesMapper>    {        public OneToManyKeyColumnNamingApplier(IDomainInspector domainInspector) : base(domainInspector) { }         #region Implementation of IPattern<PropertyPath>         public bool Match(PropertyPath subject)        {            return Match(subject.LocalMember);        }         #endregion Implementation of IPattern<PropertyPath>         #region Implementation of IPatternApplier<PropertyPath,ICollectionPropertiesMapper>         public void Apply(PropertyPath subject, ICollectionPropertiesMapper applyTo)        {            applyTo.Key(km => km.Column(GetKeyColumnName(subject)));        }         #endregion Implementation of IPatternApplier<PropertyPath,ICollectionPropertiesMapper>         protected virtual string GetKeyColumnName(PropertyPath subject)        {            Type propertyType = subject.LocalMember.GetPropertyOrFieldType();            Type childType = propertyType.DetermineCollectionElementType();            var entity = subject.GetContainerEntity(DomainInspector);            var parentPropertyInChild = childType.GetFirstPropertyOfType(entity);            var baseName = parentPropertyInChild == null ? subject.PreviousPath == null ? entity.Name : entity.Name + subject.PreviousPath : parentPropertyInChild.Name;            return GetKeyColumnName(baseName);        }         protected virtual string GetKeyColumnName(string baseName)        {            return string.Format("{0}Id", baseName);        }    } Everyone also can download the ConfORM source at google code and see example inside it. Next part I will write about multiple database factory. Hope you enjoy about it. happy coding and see you next part.

  Read the article

• disks not ready in array causes mdadm to force initramfs shell

  - by RaidPinata

  Okay, this is starting to get pretty frustrating. I've read most of the other answers on this site that have anything to do with this issue but I'm still not getting anywhere. I have a RAID 6 array with 10 devices and 1 spare. The OS is on a completely separate device. At boot only three of the 10 devices in the raid are available, the others become available later in the boot process. Currently, unless I go through initramfs I can't get the system to boot - it just hangs with a blank screen. When I do boot through recovery (initramfs), I get a message asking if I want to assemble the degraded array. If I say no and then exit initramfs the system boots fine and my array is mounted exactly where I intend it to. Here are the pertinent files as near as I can tell. Ask me if you want to see anything else. # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default (built-in), scan all partitions (/proc/partitions) and all # containers for MD superblocks. alternatively, specify devices to scan, using # wildcards if desired. #DEVICE partitions containers # auto-create devices with Debian standard permissions # CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays # This file was auto-generated on Tue, 13 Nov 2012 13:50:41 -0700 # by mkconf $Id$ ARRAY /dev/md0 level=raid6 num-devices=10 metadata=1.2 spares=1 name=Craggenmore:data UUID=37eea980:24df7b7a:f11a1226:afaf53ae Here is fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sdc2 during installation UUID=3fa1e73f-3d83-4afe-9415-6285d432c133 / ext4 errors=remount-ro 0 1 # swap was on /dev/sdc3 during installation UUID=c4988662-67f3-4069-a16e-db740e054727 none swap sw 0 0 # mount large raid device on /data /dev/md0 /data ext4 defaults,nofail,noatime,nobootwait 0 0 output of cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid6 sda[0] sdd[10](S) sdl[9] sdk[8] sdj[7] sdi[6] sdh[5] sdg[4] sdf[3] sde[2] sdb[1] 23441080320 blocks super 1.2 level 6, 512k chunk, algorithm 2 [10/10] [UUUUUUUUUU] unused devices: <none> Here is the output of mdadm --detail --scan --verbose ARRAY /dev/md0 level=raid6 num-devices=10 metadata=1.2 spares=1 name=Craggenmore:data UUID=37eea980:24df7b7a:f11a1226:afaf53ae devices=/dev/sda,/dev/sdb,/dev/sde,/dev/sdf,/dev/sdg,/dev/sdh,/dev/sdi,/dev/sdj,/dev/sdk,/dev/sdl,/dev/sdd Please let me know if there is anything else you think might be useful in troubleshooting this... I just can't seem to figure out how to change the boot process so that mdadm waits until the drives are ready to build the array. Everything works just fine if the drives are given enough time to come online. edit: changed title to properly reflect situation

  Read the article

• How to maintain encapsulation with composition in C++?

  - by iFreilicht

  I am designing a class Master that is composed from multiple other classes, A, Base, C and D. These four classes have absolutely no use outside of Master and are meant to split up its functionality into manageable and logically divided packages. They also provide extensible functionality as in the case of Base, which can be inherited from by clients. But, how do I maintain encapsulation of Master with this design? So far, I've got two approaches, which are both far from perfect: 1. Replicate all accessors: Just write accessor-methods for all accessor-methods of all classes that Master is composed of. This leads to perfect encapsulation, because no implementation detail of Master is visible, but is extremely tedious and makes the class definition monstrous, which is exactly what the composition should prevent. Also, adding functionality to one of the composees (is that even a word?) would require to re-write all those methods in Master. An additional problem is that inheritors of Base could only alter, but not add functionality. 2. Use non-assignable, non-copyable member-accessors: Having a class accessor<T> that can not be copied, moved or assigned to, but overrides the operator-> to access an underlying shared_ptr, so that calls like Master->A()->niceFunction(); are made possible. My problem with this is that it kind of breaks encapsulation as I would now be unable to change my implementation of Master to use a different class for the functionality of niceFunction(). Still, it is the closest I've gotten without using the ugly first approach. It also fixes the inheritance issue quite nicely. A small side question would be if such a class already existed in std or boost. EDIT: Wall of code I will now post the code of the header files of the classes discussed. It may be a bit hard to understand, but I'll give my best in explaining all of it. 1. GameTree.h The foundation of it all. This basically is a doubly-linked tree, holding GameObject-instances, which we'll later get to. It also has it's own custom iterator GTIterator, but I left that out for brevity. WResult is an enum with the values SUCCESS and FAILED, but it's not really important. class GameTree { public: //Static methods for the root. Only one root is allowed to exist at a time! static void ConstructRoot(seed_type seed, unsigned int depth); inline static bool rootExists(){ return static_cast<bool>(rootObject_); } inline static weak_ptr<GameTree> root(){ return rootObject_; } //delta is in ms, this is used for velocity, collision and such void tick(unsigned int delta); //Interaction with the tree inline weak_ptr<GameTree> parent() const { return parent_; } inline unsigned int numChildren() const{ return static_cast<unsigned int>(children_.size()); } weak_ptr<GameTree> getChild(unsigned int index) const; template<typename GOType> weak_ptr<GameTree> addChild(seed_type seed, unsigned int depth = 9001){ GOType object{ new GOType(seed) }; return addChildObject(unique_ptr<GameTree>(new GameTree(std::move(object), depth))); } WResult moveTo(weak_ptr<GameTree> newParent); WResult erase(); //Iterators for for( : ) loop GTIterator& begin(){ return *(beginIter_ = std::move(make_unique<GTIterator>(children_.begin()))); } GTIterator& end(){ return *(endIter_ = std::move(make_unique<GTIterator>(children_.end()))); } //unloading should be used when objects are far away WResult unloadChildren(unsigned int newDepth = 0); WResult loadChildren(unsigned int newDepth = 1); inline const RenderObject& renderObject() const{ return gameObject_->renderObject(); } //Getter for the underlying GameObject (I have not tested the template version) weak_ptr<GameObject> gameObject(){ return gameObject_; } template<typename GOType> weak_ptr<GOType> gameObject(){ return dynamic_cast<weak_ptr<GOType>>(gameObject_); } weak_ptr<PhysicsObject> physicsObject() { return gameObject_->physicsObject(); } private: GameTree(const GameTree&); //copying is only allowed internally GameTree(shared_ptr<GameObject> object, unsigned int depth = 9001); //pointer to root static shared_ptr<GameTree> rootObject_; //internal management of a child weak_ptr<GameTree> addChildObject(shared_ptr<GameTree>); WResult removeChild(unsigned int index); //private members shared_ptr<GameObject> gameObject_; shared_ptr<GTIterator> beginIter_; shared_ptr<GTIterator> endIter_; //tree stuff vector<shared_ptr<GameTree>> children_; weak_ptr<GameTree> parent_; unsigned int selfIndex_; //used for deletion, this isn't necessary void initChildren(unsigned int depth); //constructs children }; 2. GameObject.h This is a bit hard to grasp, but GameObject basically works like this: When constructing a GameObject, you construct its basic attributes and a CResult-instance, which contains a vector<unique_ptr<Construction>>. The Construction-struct contains all information that is needed to construct a GameObject, which is a seed and a function-object that is applied at construction by a factory. This enables dynamic loading and unloading of GameObjects as done by GameTree. It also means that you have to define that factory if you inherit GameObject. This inheritance is also the reason why GameTree has a template-function gameObject<GOType>. GameObject can contain a RenderObject and a PhysicsObject, which we'll later get to. Anyway, here's the code. class GameObject; typedef unsigned long seed_type; //this declaration magic means that all GameObjectFactorys inherit from GameObjectFactory<GameObject> template<typename GOType> struct GameObjectFactory; template<> struct GameObjectFactory<GameObject>{ virtual unique_ptr<GameObject> construct(seed_type seed) const = 0; }; template<typename GOType> struct GameObjectFactory : GameObjectFactory<GameObject>{ GameObjectFactory() : GameObjectFactory<GameObject>(){} unique_ptr<GameObject> construct(seed_type seed) const{ return unique_ptr<GOType>(new GOType(seed)); } }; //same as with the factories. this is important for storing them in vectors template<typename GOType> struct Construction; template<> struct Construction<GameObject>{ virtual unique_ptr<GameObject> construct() const = 0; }; template<typename GOType> struct Construction : Construction<GameObject>{ Construction(seed_type seed, function<void(GOType*)> func = [](GOType* null){}) : Construction<GameObject>(), seed_(seed), func_(func) {} unique_ptr<GameObject> construct() const{ unique_ptr<GameObject> gameObject{ GOType::factory.construct(seed_) }; func_(dynamic_cast<GOType*>(gameObject.get())); return std::move(gameObject); } seed_type seed_; function<void(GOType*)> func_; }; typedef struct CResult { CResult() : constructions{} {} CResult(CResult && o) : constructions(std::move(o.constructions)) {} CResult& operator= (CResult& other){ if (this != &other){ for (unique_ptr<Construction<GameObject>>& child : other.constructions){ constructions.push_back(std::move(child)); } } return *this; } template<typename GOType> void push_back(seed_type seed, function<void(GOType*)> func = [](GOType* null){}){ constructions.push_back(make_unique<Construction<GOType>>(seed, func)); } vector<unique_ptr<Construction<GameObject>>> constructions; } CResult; //finally, the GameObject class GameObject { public: GameObject(seed_type seed); GameObject(const GameObject&); virtual void tick(unsigned int delta); inline Matrix4f trafoMatrix(){ return physicsObject_->transformationMatrix(); } //getter inline seed_type seed() const{ return seed_; } inline CResult& properties(){ return properties_; } inline const RenderObject& renderObject() const{ return *renderObject_; } inline weak_ptr<PhysicsObject> physicsObject() { return physicsObject_; } protected: virtual CResult construct_(seed_type seed) = 0; CResult properties_; shared_ptr<RenderObject> renderObject_; shared_ptr<PhysicsObject> physicsObject_; seed_type seed_; }; 3. PhysicsObject That's a bit easier. It is responsible for position, velocity and acceleration. It will also handle collisions in the future. It contains three Transformation objects, two of which are optional. I'm not going to include the accessors on the PhysicsObject class because I tried my first approach on it and it's just pure madness (way over 30 functions). Also missing: the named constructors that construct PhysicsObjects with different behaviour. class Transformation{ Vector3f translation_; Vector3f rotation_; Vector3f scaling_; public: Transformation() : translation_{ 0, 0, 0 }, rotation_{ 0, 0, 0 }, scaling_{ 1, 1, 1 } {}; Transformation(Vector3f translation, Vector3f rotation, Vector3f scaling); inline Vector3f translation(){ return translation_; } inline void translation(float x, float y, float z){ translation(Vector3f(x, y, z)); } inline void translation(Vector3f newTranslation){ translation_ = newTranslation; } inline void translate(float x, float y, float z){ translate(Vector3f(x, y, z)); } inline void translate(Vector3f summand){ translation_ += summand; } inline Vector3f rotation(){ return rotation_; } inline void rotation(float pitch, float yaw, float roll){ rotation(Vector3f(pitch, yaw, roll)); } inline void rotation(Vector3f newRotation){ rotation_ = newRotation; } inline void rotate(float pitch, float yaw, float roll){ rotate(Vector3f(pitch, yaw, roll)); } inline void rotate(Vector3f summand){ rotation_ += summand; } inline Vector3f scaling(){ return scaling_; } inline void scaling(float x, float y, float z){ scaling(Vector3f(x, y, z)); } inline void scaling(Vector3f newScaling){ scaling_ = newScaling; } inline void scale(float x, float y, float z){ scale(Vector3f(x, y, z)); } void scale(Vector3f factor){ scaling_(0) *= factor(0); scaling_(1) *= factor(1); scaling_(2) *= factor(2); } Matrix4f matrix(){ return WMatrix::Translation(translation_) * WMatrix::Rotation(rotation_) * WMatrix::Scale(scaling_); } }; class PhysicsObject; typedef void tickFunction(PhysicsObject& self, unsigned int delta); class PhysicsObject{ PhysicsObject(const Transformation& trafo) : transformation_(trafo), transformationVelocity_(nullptr), transformationAcceleration_(nullptr), tick_(nullptr) {} PhysicsObject(PhysicsObject&& other) : transformation_(other.transformation_), transformationVelocity_(std::move(other.transformationVelocity_)), transformationAcceleration_(std::move(other.transformationAcceleration_)), tick_(other.tick_) {} Transformation transformation_; unique_ptr<Transformation> transformationVelocity_; unique_ptr<Transformation> transformationAcceleration_; tickFunction* tick_; public: void tick(unsigned int delta){ tick_ ? tick_(*this, delta) : 0; } inline Matrix4f transformationMatrix(){ return transformation_.matrix(); } } 4. RenderObject RenderObject is a base class for different types of things that could be rendered, i.e. Meshes, Light Sources or Sprites. DISCLAIMER: I did not write this code, I'm working on this project with someone else. class RenderObject { public: RenderObject(float renderDistance); virtual ~RenderObject(); float renderDistance() const { return renderDistance_; } void setRenderDistance(float rD) { renderDistance_ = rD; } protected: float renderDistance_; }; struct NullRenderObject : public RenderObject{ NullRenderObject() : RenderObject(0.f){}; }; class Light : public RenderObject{ public: Light() : RenderObject(30.f){}; }; class Mesh : public RenderObject{ public: Mesh(unsigned int seed) : RenderObject(20.f) { meshID_ = 0; textureID_ = 0; if (seed == 1) meshID_ = Model::getMeshID("EM-208_heavy"); else meshID_ = Model::getMeshID("cube"); }; unsigned int getMeshID() const { return meshID_; } unsigned int getTextureID() const { return textureID_; } private: unsigned int meshID_; unsigned int textureID_; }; I guess this shows my issue quite nicely: You see a few accessors in GameObject which return weak_ptrs to access members of members, but that is not really what I want. Also please keep in mind that this is NOT, by any means, finished or production code! It is merely a prototype and there may be inconsistencies, unnecessary public parts of classes and such.

  Read the article

• Problems with SAT Collision Detection

  - by DJ AzKai

  I'm doing a project in one of my modules for college in C++ with SFML and I was hoping someone may be able to help me. I'm using a vector of squares and triangles and I am using the SAT collision detection method to see if objects collide and to make the objects respond to the collision appropriately using the MTV(minimum translation vector) Below is my code: //from the main method int main(){ // Create the main window sf::RenderWindow App(sf::VideoMode(800, 600, 32), "SFML OpenGL"); // Create a clock for measuring time elapsed sf::Clock Clock; srand(time(0)); //prepare OpenGL surface for HSR glClearDepth(1.f); glClearColor(0.3f, 0.3f, 0.3f, 0.f); //background colour glEnable(GL_DEPTH_TEST); glDepthMask(GL_TRUE); //// Setup a perspective projection & Camera position glMatrixMode(GL_PROJECTION); glLoadIdentity(); //set up a 3D Perspective View volume //gluPerspective(90.f, 1.f, 1.f, 300.0f);//fov, aspect, zNear, zFar //set up a orthographic projection same size as window //this mease the vertex coordinates are in pixel space glOrtho(0,800,0,600,0,1); // use pixel coordinates // Finally, display rendered frame on screen vector<BouncingThing*> triangles; for(int i = 0; i < 10; i++) { //instantiate each triangle; triangles.push_back(new BouncingTriangle(Vector2f(rand() % 700, rand() % 500), 3)); } vector<BouncingThing*> boxes; for(int i = 0; i < 10; i++) { //instantiate each box; boxes.push_back(new BouncingBox(Vector2f(rand() % 700, rand() % 500), 4)); } CollisionDetection * b = new CollisionDetection(); // Start game loop while (App.isOpen()) { // Process events sf::Event Event; while (App.pollEvent(Event)) { // Close window : exit if (Event.type == sf::Event::Closed) App.close(); // Escape key : exit if ((Event.type == sf::Event::KeyPressed) && (Event.key.code == sf::Keyboard::Escape)) App.close(); } //Prepare for drawing // Clear color and depth buffer glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // Apply some transformations glMatrixMode(GL_MODELVIEW); glLoadIdentity(); for(int i = 0; i < 10; i++) { triangles[i]->draw(); boxes[i]->draw(); triangles[i]->update(Vector2f(800,600)); boxes[i]->draw(); boxes[i]->update(Vector2f(800,600)); } for(int j = 0; j < 10; j++) { for(int i = 0; i < 10; i++) { triangles[j]->setCollision(b->CheckCollision(*(triangles[j]),*(boxes[i]))); } } for(int j = 0; j < 10; j++) { for(int i = 0; i < 10; i++) { boxes[j]->setCollision(b->CheckCollision(*(boxes[j]),*(triangles[i]))); } } for(int i = 0; i < triangles.size(); i++) { for(int j = i + 1; j < triangles.size(); j ++) { triangles[j]->setCollision(b->CheckCollision(*(triangles[j]),*(triangles[i]))); } } for(int i = 0; i < triangles.size(); i++) { for(int j = i + 1; j < triangles.size(); j ++) { boxes[j]->setCollision(b->CheckCollision(*(boxes[j]),*(boxes[i]))); } } App.display(); } return EXIT_SUCCESS; } (ignore this line) //from the BouncingThing.cpp BouncingThing::BouncingThing(Vector2f position, int noSides) : pos(position), pi(3.14), radius(3.14), nSides(noSides) { collided = false; if(nSides ==3) { Vector2f vert1 = Vector2f(-12.0f,-12.0f); Vector2f vert2 = Vector2f(0.0f, 12.0f); Vector2f vert3 = Vector2f(12.0f,-12.0f); verts.push_back(vert1); verts.push_back(vert2); verts.push_back(vert3); } else if(nSides == 4) { Vector2f vert1 = Vector2f(-12.0f,12.0f); Vector2f vert2 = Vector2f(12.0f, 12.0f); Vector2f vert3 = Vector2f(12.0f,-12.0f); Vector2f vert4 = Vector2f(-12.0f, -12.0f); verts.push_back(vert1); verts.push_back(vert2); verts.push_back(vert3); verts.push_back(vert4); } velocity.x = ((rand() % 5 + 1) / 3) + 1; velocity.y = ((rand() % 5 + 1) / 3 ) +1; } void BouncingThing::update(Vector2f screenSize) { Transform t; t.rotate(0); for(int i=0;i< verts.size(); i++) { verts[i]=t.transformPoint(verts[i]); } if(pos.x >= screenSize.x || pos.x <= 0) { velocity.x *= -1; } if(pos.y >= screenSize.y || pos.y <= 0) { velocity.y *= -1; } if(collided) { //velocity.x *= -1; //velocity.y *= -1; collided = false; } pos += velocity; } void BouncingThing::setCollision(bool x){ collided = x; } void BouncingThing::draw() { glBegin(GL_POLYGON); glColor3f(0,1,0); for(int i = 0; i < verts.size(); i++) { glVertex2f(pos.x + verts[i].x,pos.y + verts[i].y); } glEnd(); } vector<Vector2f> BouncingThing::getNormals() { vector<Vector2f> normalVerts; if(nSides == 3) { Vector2f ab = Vector2f((verts[1].x + pos.x) - (verts[0].x + pos.x), (verts[1].y + pos.y) - (verts[0].y + pos.y)); ab = flip(ab); ab.x *= -1; normalVerts.push_back(ab); Vector2f bc = Vector2f((verts[2].x + pos.x) - (verts[1].x + pos.x), (verts[2].y + pos.y) - (verts[1].y + pos.y)); bc = flip(bc); bc.x *= -1; normalVerts.push_back(bc); Vector2f ac = Vector2f((verts[2].x + pos.x) - (verts[0].x + pos.x), (verts[2].y + pos.y) - (verts[0].y + pos.y)); ac = flip(ac); ac.x *= -1; normalVerts.push_back(ac); return normalVerts; } if(nSides ==4) { Vector2f ab = Vector2f((verts[1].x + pos.x) - (verts[0].x + pos.x), (verts[1].y + pos.y) - (verts[0].y + pos.y)); ab = flip(ab); ab.x *= -1; normalVerts.push_back(ab); Vector2f bc = Vector2f((verts[2].x + pos.x) - (verts[1].x + pos.x), (verts[2].y + pos.y) - (verts[1].y + pos.y)); bc = flip(bc); bc.x *= -1; normalVerts.push_back(bc); return normalVerts; } } Vector2f BouncingThing::flip(Vector2f v){ float vyTemp = v.x; float vxTemp = v.y * -1; return Vector2f(vxTemp, vyTemp); } (Ignore this line) CollisionDetection::CollisionDetection() { } vector<float> CollisionDetection::bubbleSort(vector<float> w) { int temp; bool finished = false; while (!finished) { finished = true; for (int i = 0; i < w.size()-1; i++) { if (w[i] > w[i+1]) { temp = w[i]; w[i] = w[i+1]; w[i+1] = temp; finished=false; } } } return w; } class Vector{ public: //static int dp_count; static float dot(sf::Vector2f a,sf::Vector2f b){ //dp_count++; return a.x*b.x+a.y*b.y; } static float length(sf::Vector2f a){ return sqrt(a.x*a.x+a.y*a.y); } static Vector2f add(Vector2f a, Vector2f b) { return Vector2f(a.x + b.y, a.y + b.y); } static sf::Vector2f getNormal(sf::Vector2f a,sf::Vector2f b){ sf::Vector2f n; n=a-b; n/=Vector::length(n);//normalise float x=n.x; n.x=n.y; n.y=-x; return n; } }; bool CollisionDetection::CheckCollision(BouncingThing & x, BouncingThing & y) { vector<Vector2f> xVerts = x.getVerts(); vector<Vector2f> yVerts = y.getVerts(); vector<Vector2f> xNormals = x.getNormals(); vector<Vector2f> yNormals = y.getNormals(); int size; vector<float> xRange; vector<float> yRange; for(int j = 0; j < xNormals.size(); j++) { Vector p; for(int i = 0; i < xVerts.size(); i++) { xRange.push_back(p.dot(xNormals[j], Vector2f(xVerts[i].x, xVerts[i].x))); } for(int i = 0; i < yVerts.size(); i++) { yRange.push_back(p.dot(xNormals[j], Vector2f(yVerts[i].x , yVerts[i].y))); } yRange = bubbleSort(yRange); xRange = bubbleSort(xRange); if(xRange[xRange.size() - 1] < yRange[0] || yRange[yRange.size() - 1] < xRange[0]) { return false; } float x3 = Min(xRange[0], yRange[0]); float y3 = Max(xRange[xRange.size() - 1], yRange[yRange.size() - 1]); float length = Max(x3, y3) - Min(x3, y3); } for(int j = 0; j < yNormals.size(); j++) { Vector p; for(int i = 0; i < xVerts.size(); i++) { xRange.push_back(p.dot(yNormals[j], xVerts[i])); } for(int i = 0; i < yVerts.size(); i++) { yRange.push_back(p.dot(yNormals[j], yVerts[i])); } yRange = bubbleSort(yRange); xRange = bubbleSort(xRange); if(xRange[xRange.size() - 1] < yRange[0] || yRange[yRange.size() - 1] < xRange[0]) { return false; } } return true; } float CollisionDetection::Min(float min, float max) { if(max < min) { min = max; } else return min; } float CollisionDetection::Max(float min, float max) { if(min > max) { max = min; } else return min; } On the screen the objects will freeze for a small amount of time before moving off again. However the problem is is that when this happens there are no collisions actually happening and I would really love to find out where the flaw is in the code. If you need any more information/code please don't hesitate to ask and I'll reply as soon as possible Regards, AzKai

  Read the article

• Error Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException [migrated]

  - by user134212

  I'm new here. I'm learning how to program on java and I have a problem with my code. I really have no clue why my code is not working. I think my mistake may be here, but I'm not quite sure. m3 = new Matriz(ren2,col2); btSumar.addActionListener(new ActionListener() { Matriz m3;//(ren2,col2); public void actionPerformed(ActionEvent e) { m3 = new Matriz(ren2,col2); if(ventanaAbierta==true) { try { crearMat.SUMA(m1,m2); } catch(Exception nul) { System.out.println(nul); } } else { JOptionPane.showMessageDialog(null,"Ya se realizo la suma"); } } }); My Complete code import java.awt.*; import javax.swing.*; import javax.swing.BorderFactory; import javax.swing.border.Border; import java.awt.event.*; import java.awt.*; import java.io.*; import java.util.*; public class Practica2 { private int opcion,ren2,col2; private JFrame ventana,ventanaPrintMatriz; private JPanel panel,panel2; private Border borderRed2,borderBlue2,borderGreen2,borderGreen4; private Color red,green,blue,white,black; private Font Verdana14,ArialBlack18; private JLabel labelTitulo; public JButton btSalir,btSumar,btRestar,btMultiplica,btTranspuesta,btCrear; private ImageIcon suma,resta,multi,crear,salir,trans; private boolean ventanaAbierta = false; private static ValidacionesMatrices valida; private static Operaciones operacion; private static Matriz m1,m2,m3; private static ImprimirMatriz printMat; public Practica2() { panel = new JPanel(); panel.setLayout(null); ventana = new JFrame("Operaciones con Matrices"); ventana.setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE); ventana.addWindowListener(new WindowAdapter() { public void windowClosing(WindowEvent e) { //Sale del programa System.exit(0); } }); ventana.setContentPane(panel); ventana.setVisible(true); ventana.setResizable(false); ventana.setBounds(150,150,300,380); //ventana.setBounds(0,0,650,650); } public void inicializarComponentes() { panel2 = new JPanel(); panel2.setLayout(null); labelTitulo = new JLabel("Practica #2"); suma = new ImageIcon("suma1.png"); resta = new ImageIcon("resta1.png"); multi = new ImageIcon("multi1.png"); trans = new ImageIcon("trans2.png"); crear = new ImageIcon("crear1.png"); salir = new ImageIcon("salir1.png"); btTranspuesta = new JButton("Transpuesta",trans); btMultiplica = new JButton("Multiplica",multi); btRestar = new JButton("Restar",resta); btSumar = new JButton("Sumar",suma); btCrear = new JButton("Crear",crear); btSalir = new JButton("Salir",salir); //Tipo de letra ArialBlack18 = new Font("Arial Black",Font.BOLD,18); //Color green = new Color(0,255,0); //Formato labelTitulo labelTitulo.setBounds(80,-60,200,150); labelTitulo.setFont(ArialBlack18); labelTitulo.setForeground(blue); labelTitulo.setVisible(true); //Formato de CrearMatriz btCrear.setBounds(80,50,130,30); btCrear.setToolTipText("Crea una matriz"); //Formato de Muliplica btMultiplica.setBounds(80,100,130,30); btMultiplica.setToolTipText("Mat[A] * Mat[B]"); //Formato de botonRestar btRestar.setBounds(80,150,130,30); btRestar.setToolTipText("Mat[A] - Mat[B]"); //Formato del botonSumar btSumar.setBounds(80,200,130,30); btSumar.setToolTipText("Mat[A] + Mat[B]"); //Formato de Transpuesta btTranspuesta.setBounds(80,250,130,30); btTranspuesta.setToolTipText("Mat[A]^-1"); //Formato del botonSalir btSalir.setBounds(80,300,130,30); //Agregando componentes al panel1 panel2.add(labelTitulo); panel2.add(btMultiplica); panel2.add(btCrear); panel2.add(btRestar); panel2.add(btSumar); panel2.add(btSalir); panel2.add(btTranspuesta); //Formato panel2 panel2.setBackground(green); panel2.setVisible(true); panel2.setBounds(0,0,300,380); //Argregamos componentes al panelPrincipal= panel.add(panel2); //BotonCrear btCrear.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent e) //throws IOException { if(ventanaAbierta==false) { ventanaAbierta=true; new CrearMatriz(); } else { JOptionPane.showMessageDialog(null,"Ya se crearon las Matrices"); } } }); m3 = new Matriz(ren2,col2); btSumar.addActionListener(new ActionListener() { Matriz m3;//(ren2,col2); public void actionPerformed(ActionEvent e) { m3 = new Matriz(ren2,col2); if(ventanaAbierta==true) { try { crearMat.SUMA(m1,m2); } catch(Exception nul) { System.out.println(nul); } } else { JOptionPane.showMessageDialog(null,"Ya se realizo la suma"); } } }); //BotonSalir btSalir.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent e) { System.exit(0); } }); panel.setVisible(true); panel.setBounds(0,0,350,380); } class VentanaMatriz { private JFrame ventana; private JPanel panel; private JTextArea textArea1,textArea2; private JLabel mat1,mat2; private JTextField textField1; public VentanaMatriz() { panel = new JPanel(); panel.setLayout(null); ventana = new JFrame("Creacion de Matrices"); ventana.addWindowListener(new WindowAdapter() { public void windowClosing(WindowEvent e) { ventana.dispose(); } }); ventana.setContentPane(panel); ventana.setVisible(true); ventana.setResizable(false); ventana.setBounds(200,100,850,420); } public void inicializarComponentes() { //Colores black = new Color(0,0,0); white = new Color(255,255,255); blue = new Color(0,0,255); green = new Color(0,255,0); red = new Color(255,0,0); //Tipo de letra Verdana14 = new Font("Verdana",Font.BOLD,14); //Tipos de borde borderRed2 = BorderFactory.createLineBorder(red,2); borderBlue2 = BorderFactory.createLineBorder(blue,2); borderGreen2 = BorderFactory.createLineBorder(green,2); borderGreen4 = BorderFactory.createLineBorder(green,4); //Agregando componentes al panel1 panel.add(mat1); panel.add(textArea1); panel.add(mat2); panel.add(textArea2); //Formato panel2 panel.setBackground(blue); panel.setVisible(true); panel.setBounds(0,0,850,420); } } class CrearMatriz { public int col1,re1,ren2,col2; public Matriz m1,m2,m3; public CrearMatriz() { int col1,ren1,ren2,col2; ren2 = Integer.parseInt(JOptionPane.showInputDialog("Numero de Renglones Matriz A: ")); col2 = Integer.parseInt(JOptionPane.showInputDialog("Numero de Columnas Matriz A: ")); final Matriz m1= new Matriz(ren2,col2); ren2 = Integer.parseInt(JOptionPane.showInputDialog("Numero de Renglones Matriz B: ")); col2 = Integer.parseInt(JOptionPane.showInputDialog("Numero de Columnas Matriz B: ")); final Matriz m2= new Matriz(ren2,col2); m3 = new Matriz(ren2,col2); m1.llenarMatriz(); m2.llenarMatriz(); m1.printMat(); m2.printMat(); } public void SUMA(Matriz m1,Matriz m2) { Matriz m3; if(ventanaAbierta==false) { m3 = new Matriz(ren2,col2); if(valida.validaSumayResta(m1,m2)) { m3 = operacion.sumaMat(m1,m2); JOptionPane.showMessageDialog(null,"La suma es = "); m3.imprimeMatriz(); } else { JOptionPane.showMessageDialog(null,"No es posible hacer la suma"); } } } public void RESTA() { } //btSumar = new JButton("Sumar",suma); //BotonSumar //Mostrar matriz 1 y 2 // System.out.println("\n\n\nMatriz 1="); // m1.imprimeMatriz(); // System.out.println("\nMatriz 2="); //Poner en botones /* if(valida.validaSumayResta(m1,m2)) { m3 = operacion.sumaMat(m1,m2); JOptionPane.showMessageDialog(null,"La suma es = "); m3.imprimeMatriz(); } else { JOptionPane.showMessageDialog(null,"No es posible hacer la suma"); } if(valida.validaSumayResta(m1,m2)) { m3=operacion.restaMat(m1,m2); JOptionPane.showMessageDialog(null,"La resta es = "); m3.imprimeMatriz(); } else { JOptionPane.showMessageDialog(null,"No es posible hacer la resta"); } if(valida.validaMultiplicacion(m1,m2)){ m3=operacion.multiplicaMat(m1,m2); JOptionPane.showMessageDialog(null,"La multiplicacion es = "); m3.imprimeMatriz(); } else { JOptionPane.showMessageDialog(null,"No es posible hacer la multiplicacion"); } JOptionPane.showMessageDialog(null,"La multiplicacion es = "); m1=operacion.transpuesta(m1); m2=operacion.transpuesta(m2); */ } class Matriz { public JTextField matriz; //public JTextArea texto; private JFrame ventanaPrintMatriz; private JPanel panel2; int ren; int col; int pos[][]; public Matriz(int ren1, int col1) { ren = ren1; col = col1; pos = new int [ren][col];/*una matriz de enteros de renglon por columan*/ } public void llenarMatriz() { for(int i=0;i<ren;i++) for(int j=0;j<col;j++) pos[i][j]=(int) (Math.random()*10);/*la posicion i y j crea un entero random*/ } /*vuelve a recorrer los espacio de i y j*/ } //Esta clase era un metodo de CrearMatriz class ImprimirMatriz { public void ImprimirMatriz() { panel2 = new JPanel(); panel2.setLayout(null); ventanaPrintMatriz = new JFrame("Matriz"); ventana.addWindowListener(new WindowAdapter() { public void windowClosing(WindowEvent e) { //Practica2.ventanaAbierta=false; ventana.dispose(); } }); int i,j; int x=0,y=0; borderRed2 = BorderFactory.createLineBorder(red,2); white = new Color(255,255,255); red = new Color(255,0,0); black = new Color(0,0,0); blue = new Color(0,0,255); for(i=0;i<ren;i++) { for(j=0;j<col;j++) { matriz = new JTextField(" "+pos[i][j]); matriz.setBorder(borderRed2); matriz.setForeground(white); matriz.setBounds(x+25,y+25,25,25); matriz.setBackground(black); matriz.setEditable(false); matriz.setVisible(true); //Se incrementa la coordenada en X //para el siguiente Textfield no se encime x=x+35; //Agregamos el textField al panel panel2.add(matriz); } //Regreso las cordenadas de X a 0 para que el //siguiente renglon empieze en donde mismo x=0; //Incremento las coordenada Y para que se brinque //de linea y=y+35; } //Formato panel2 panel2.setBounds(150,150,350,380); panel2.setBackground(blue); //panel2.setEditable(false); panel2.setVisible(true); //Formato de Ventana ventanaPrintMatriz.setContentPane(panel2); ventanaPrintMatriz.setBounds(150,150,350,380); ventanaPrintMatriz.setResizable(false); ventanaPrintMatriz.setVisible(true); } } class Operaciones { public Matriz sumaMat(Matriz m1, Matriz m2) { Matriz m3; m3 = new Matriz(m1.ren, m1.col); for(int i=0;i<m1.col;i++) for(int j=0;j<m1.ren;j++) m3.pos[i][j]=m1.pos[i][j]+m2.pos[i][j]; return m3; } public Matriz restaMat(Matriz m1, Matriz m2) { Matriz m3; m3 = new Matriz(m1.ren, m1.col); for(int i=0;i<m1.col;i++) for(int j=0;j<m1.ren;j++) m3.pos[i][j]=m1.pos[i][j]-m2.pos[i][j]; return m3; } public Matriz multiplicaMat(Matriz m1, Matriz m2) { Matriz m3; m3 = new Matriz(m1.ren, m2.col); for(int i=0;i<m1.ren;i++) for(int j=0;j<m2.col;j++) { m3.pos[i][j]=0; for(int k=0;k<m1.col;k++) m3.pos[i][j]+=(m1.pos[i][k]*m2.pos[k][j]); } return m3; } public Matriz transpuesta(Matriz m1) { Matriz m3=new Matriz(m1.col,m1.ren); for(int i=0;i<m1.col;i++) for(int j=0;j<m1.ren;j++) m3.pos[i][j]=m1.pos[j][i]; return m3; } } class ValidacionesMatrices { public boolean validaSumayResta(Matriz m1, Matriz m2) { if((m1.ren==m2.ren) && (m1.col==m2.col)) return true; else return false; } public boolean validaMultiplicacion(Matriz m1, Matriz m2) { if(((m1.ren==m2.ren) && (m1.col==m2.col)) || (m1.col==m2.ren)) return true; else return false; } } public static void main(String[] args) { Practica2 practica2 = new Practica2(); practica2.inicializarComponentes(); } } Exc

  Read the article

• cannot send mail to postfix /w iptables linux proxy

  - by Juzzam

  I have two separate servers, both running Ubuntu 8.04. Server 1 has the real domain name of our site, let's refer to it as example.com. Server 2 is a mail server I have setup with postfix/courier. The hostname for this server is mail.example.com. I've setup iptables on Server 1 to forward all traffic on port 25 to Server 2. I used this script (except I changed the target ip address and the port from 80 to 25). When I send an email to [email protected] it works. However, when I try to send an email to [email protected] from gmail, I get this error: 550 550 #5.1.0 Address rejected [email protected] (state 14) /var/log/mail.log shows no new lines when this happens. What is strange is that it works with telnet from my local machine. For example: $ telnet example.com 25 220 VO13421.localdomain SMTP Postfix EHLO example.com 250-VO13421.localdomain 250-PIPELINING 250-SIZE 10240000 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN MAIL FROM: [email protected] 250 2.1.0 Ok RCPT TO: [email protected] 250 2.1.5 Ok data 354 Please start mail input. hello user... how have you been? . 250 Mail queued for delivery. quit 221 Closing connection. Good bye. /var/log/mail.log shows success (and the email goes to the maildr): Feb 24 09:47:36 VO13421 postfix/smtpd[2212]: connect from 81.208.68.208.static.dnsptr.net[208.68.xxx.xxx] Feb 24 09:48:01 VO13421 postfix/smtpd[2212]: warning: restriction `smtpd_data_restrictions' after `permit' is ignored Feb 24 09:48:01 VO13421 postfix/smtpd[2212]: 65C68120321: client=81.208.68.208.static.dnsptr.net[208.68.xxx.xxx] Feb 24 09:48:29 VO13421 postfix/smtpd[2212]: warning: restriction `smtpd_data_restrictions' after `permit' is ignored Feb 24 09:48:29 VO13421 postfix/smtpd[2212]: 6BDFA120321: client=81.208.68.208.static.dnsptr.net[208.68.xxx.xxx] Feb 24 09:48:29 VO13421 postfix/cleanup[2216]: 6BDFA120321: message-id= Feb 24 09:48:29 VO13421 postfix/qmgr[2042]: 6BDFA120321: from=, size=395, nrcpt=1 (queue active) Feb 24 09:48:29 VO13421 postfix/virtual[2217]: 6BDFA120321: to=, relay=virtual, delay=0.28, delays=0.25/0.02/0/0.01, dsn=2.0.0, status=sent (delivered to maildir) Feb 24 09:48:29 VO13421 postfix/qmgr[2042]: 6BDFA120321: removed Feb 24 09:48:30 VO13421 postfix/smtpd[2212]: disconnect from 81.208.68.208.static.dnsptr.net[208.68.xxx.xxx] iptables -L -n -v --line on example.com yields the following. Anyone know an iptables command to see the port forwarding? Also, it seems to accept all traffic, that's probably bad right? ;] num pkts bytes target prot opt in out source destination 1 14041 1023K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 338 20722 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT 419K packets, 425M bytes) num pkts bytes target prot opt in out source destination 1 13711 2824K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 postconf -n results in: alias_database = hash:/etc/postfix/aliases alias_maps = hash:/etc/postfix/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix delay_warning_time = 4h disable_vrfy_command = yes inet_interfaces = all local_recipient_maps = mailbox_size_limit = 0 masquerade_domains = mail.example.com mail1.example.com masquerade_exceptions = root maximal_backoff_time = 8000s maximal_queue_lifetime = 7d minimal_backoff_time = 1000s mydestination = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mynetworks_style = host myorigin = example.com readme_directory = no recipient_delimiter = + relayhost = smtp_helo_timeout = 60s smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname SMTP $mail_name smtpd_client_restrictions = reject_rbl_client sbl.spamhaus.org, reject_rbl_client blackholes.easynet.nl, reject_rbl_client dnsbl.njabl.org smtpd_delay_reject = yes smtpd_hard_error_limit = 12 smtpd_helo_required = yes smtpd_helo_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_hostname, reject_invalid_hostname, permit smtpd_recipient_limit = 16 smtpd_recipient_restrictions = reject_unauth_pipelining, permit_mynetworks, reject_non_fqdn_recipient, reject_unknown_recipient_domain, reject_unauth_destination, permit smtpd_data_restrictions = reject_unauth_pipelining smtpd_sender_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_sender, reject_unknown_sender_domain, reject_unauth_pipelining, permit smtpd_soft_error_limit = 3 smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes unknown_local_recipient_reject_code = 450 virtual_alias_maps = mysql:/etc/postfix/mysql_alias.cf virtual_gid_maps = mysql:/etc/postfix/mysql_gid.cf virtual_mailbox_base = /var/spool/mail/virtual virtual_mailbox_domains = mysql:/etc/postfix/mysql_domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql_mailbox.cf virtual_uid_maps = mysql:/etc/postfix/mysql_uid.cf

  Read the article

• cannot send mail to postfix /w iptables linux proxy

  - by Juzzam

  I have two separate servers, both running Ubuntu 8.04. Server 1 has the real domain name of our site, let's refer to it as example.com. Server 2 is a mail server I have setup with postfix/courier. The hostname for this server is mail.example.com. I've setup iptables on Server 1 to forward all traffic on port 25 to Server 2. I used this script (except I changed the target ip address and the port from 80 to 25). When I send an email to [email protected] it works. However, when I try to send an email to [email protected] from gmail, I get this error: 550 550 #5.1.0 Address rejected [email protected] (state 14) /var/log/mail.log shows no new lines when this happens. What is strange is that it works with telnet from my local machine. For example: $ telnet example.com 25 220 VO13421.localdomain SMTP Postfix EHLO example.com 250-VO13421.localdomain 250-PIPELINING 250-SIZE 10240000 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN MAIL FROM: [email protected] 250 2.1.0 Ok RCPT TO: [email protected] 250 2.1.5 Ok data 354 Please start mail input. hello user... how have you been? . 250 Mail queued for delivery. quit 221 Closing connection. Good bye. /var/log/mail.log shows success (and the email goes to the maildr): Feb 24 09:47:36 VO13421 postfix/smtpd[2212]: connect from 81.208.68.208.static.dnsptr.net[208.68.xxx.xxx] Feb 24 09:48:01 VO13421 postfix/smtpd[2212]: warning: restriction `smtpd_data_restrictions' after `permit' is ignored Feb 24 09:48:01 VO13421 postfix/smtpd[2212]: 65C68120321: client=81.208.68.208.static.dnsptr.net[208.68.xxx.xxx] Feb 24 09:48:29 VO13421 postfix/smtpd[2212]: warning: restriction `smtpd_data_restrictions' after `permit' is ignored Feb 24 09:48:29 VO13421 postfix/smtpd[2212]: 6BDFA120321: client=81.208.68.208.static.dnsptr.net[208.68.xxx.xxx] Feb 24 09:48:29 VO13421 postfix/cleanup[2216]: 6BDFA120321: message-id= Feb 24 09:48:29 VO13421 postfix/qmgr[2042]: 6BDFA120321: from=, size=395, nrcpt=1 (queue active) Feb 24 09:48:29 VO13421 postfix/virtual[2217]: 6BDFA120321: to=, relay=virtual, delay=0.28, delays=0.25/0.02/0/0.01, dsn=2.0.0, status=sent (delivered to maildir) Feb 24 09:48:29 VO13421 postfix/qmgr[2042]: 6BDFA120321: removed Feb 24 09:48:30 VO13421 postfix/smtpd[2212]: disconnect from 81.208.68.208.static.dnsptr.net[208.68.xxx.xxx] iptables -L -n -v --line on example.com yields the following. Anyone know an iptables command to see the port forwarding? Also, it seems to accept all traffic, that's probably bad right? ;] num pkts bytes target prot opt in out source destination 1 14041 1023K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 338 20722 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT 419K packets, 425M bytes) num pkts bytes target prot opt in out source destination 1 13711 2824K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 postconf -n results in: alias_database = hash:/etc/postfix/aliases alias_maps = hash:/etc/postfix/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix delay_warning_time = 4h disable_vrfy_command = yes inet_interfaces = all local_recipient_maps = mailbox_size_limit = 0 masquerade_domains = mail.example.com mail1.example.com masquerade_exceptions = root maximal_backoff_time = 8000s maximal_queue_lifetime = 7d minimal_backoff_time = 1000s mydestination = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mynetworks_style = host myorigin = example.com readme_directory = no recipient_delimiter = + relayhost = smtp_helo_timeout = 60s smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname SMTP $mail_name smtpd_client_restrictions = reject_rbl_client sbl.spamhaus.org, reject_rbl_client blackholes.easynet.nl, reject_rbl_client dnsbl.njabl.org smtpd_delay_reject = yes smtpd_hard_error_limit = 12 smtpd_helo_required = yes smtpd_helo_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_hostname, reject_invalid_hostname, permit smtpd_recipient_limit = 16 smtpd_recipient_restrictions = reject_unauth_pipelining, permit_mynetworks, reject_non_fqdn_recipient, reject_unknown_recipient_domain, reject_unauth_destination, permit smtpd_data_restrictions = reject_unauth_pipelining smtpd_sender_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_sender, reject_unknown_sender_domain, reject_unauth_pipelining, permit smtpd_soft_error_limit = 3 smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes unknown_local_recipient_reject_code = 450 virtual_alias_maps = mysql:/etc/postfix/mysql_alias.cf virtual_gid_maps = mysql:/etc/postfix/mysql_gid.cf virtual_mailbox_base = /var/spool/mail/virtual virtual_mailbox_domains = mysql:/etc/postfix/mysql_domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql_mailbox.cf virtual_uid_maps = mysql:/etc/postfix/mysql_uid.cf

  Read the article

• Yii: Multi-language website - best practices.

  - by michal

  Hi, I find Yii great framework, and the example website created with yiic shell is a good point to start... however it doesn't cover the topic of multi-language websites, unfortunately. The docs covers the topic of translating short messages, but not keeping the multi-lingual content ... I'm about to start working on a website which needs to be in at least two languages, and I'm wondering what is the best way to keep content for that ... The problem is that the content is mixed extensively with common elements (like embedded video files). I need to avoid duplicating those commons ... so far I used to have an array of arrays containing texts (usually no more than 1-2 short paragraphs), then the view file was just rendering the text from an array. Now I'd like to avoid keeping it in arrays (which requires some attention when putting double quotations " " and is inconvenient in general...). So, what is the best way to keep those short paragraphs? Should I keep them in DB like (id | msg_id | language | content ) and then select them by msg_id & language? That still requires me to create some msg_id's and embed them into view file ... Is there any recommended paradigm for which Yii has some solutions? Thanks, m.

  Read the article

• Async.Parallel or Array.Parallel.Map ?

  - by gurteen2

  Hello- I'm trying to implement a pattern I read from Don Syme's blog (http://blogs.msdn.com/dsyme/archive/2010/01/09/async-and-parallel-design-patterns-in-f-parallelizing-cpu-and-i-o-computations.aspx) which suggests that there are opportunities for massive performance improvements from leveraging asynchronous I/O. I am currently trying to take a piece of code that "works" one way, using Array.Parallel.Map, and see if I can somehow achieve the same result using Async.Parallel, but I really don't understand Async.Parallel, and cannot get anything to work. I have a piece of code (simplified below to illustrate the point) that successfully retrieves an array of data for one cusip. (A price series, for example) let getStockData cusip = let D = DataProvider() let arr = D.GetPriceSeries(cusip) return arr let data = Array.Parallel.map (fun x -> getStockData x) stockCusips So this approach contructs an array of arrays, by making a connection over the internet to my data vendor for each stock (which could be as many as 3000) and returns me an array of arrays (1 per stock, with a price series for each one). I admittedly don't understand what goes on underneath Array.Parallel.map, but am wondering if this is a scenario where there are resources wasted under the hood, and it actually could be faster using asynchronous I/O? So to test this out, I have attempted to make this function using asyncs, and I think that the function below follows the pattern in Don Syme's article using the URLs, but it won't compile with "let!". let getStockDataAsync cusip = async { let D = DataProvider() let! arr = D.GetData(cusip) return arr } The error I get is: This expression was expected to have type Async<'a but here has type obj It compiles fine with "let" instead of "let!", but I had thought the whole point was that you need the exclamation point in order for the command to run without blocking a thread. So the first question really is, what's wrong with my syntax above, in getStockDataAsync, and then at a higher level, can anyone offer some additional insight about asychronous I/O and whether the scenario I have presented would benefit from it, making it potentially much, much faster than Array.Parallel.map? Thanks so much.

  Read the article

• Submitting a multidimensional array via POST with php

  - by Fireflight

  I have a php form that has a known number of columns (ex. top diameter, bottom diameter, fabric, colour, quantity), but has an unknown number of rows, as users can add rows as they need. I've discovered how to take each of the fields(columns) and place them into an array of their own. <input name="topdiameter['+current+']" type="text" id="topdiameter'+current+'" size="5" /> <input name="bottomdiameter['+current+']" type="text" id="bottomdiameter'+current+'" size="5" /> So what I end up with in the HTML is: <tr> <td><input name="topdiameter[0]" type="text" id="topdiameter0" size="5" /></td> <td><input name="bottomdiameter[0]" type="text" id="bottomdiameter0" size="5" /></td> </tr> <tr> <td><input name="topdiameter[1]" type="text" id="topdiameter0" size="5" /></td> <td><input name="bottomdiameter[1]" type="text" id="bottomdiameter0" size="5" /></td> </tr> ...and so on. What I would like to do now is take all the rows and columns put them into a multidimensional array and email the contents of that to the client (preferably in a nicely formatted table). I haven't been able to really comprehend how to combine all those inputs and selects into a nice array. At this point, I'm going to have to try to use several 1D arrays, although I have the idea that using a single 2D array would be a better practice than using several 1D arrays.

  Read the article

• adjacency list creation , out of Memory error

  - by p1

  Hello , I am trying to create an adjacency list to store a graph.The implementation works fine while storing 100,000 records. However,when I tried to store around 1million records I ran into OutofMemory Error : Exception in thread "main" java.lang.OutOfMemoryError: Java heap space at java.util.Arrays.copyOfRange(Arrays.java:3209) at java.lang.String.(String.java:215) at java.io.BufferedReader.readLine(BufferedReader.java:331) at java.io.BufferedReader.readLine(BufferedReader.java:362) at liarliar.main(liarliar.java:39) Following is my implementation HashMap<String,ArrayList<String>> adj = new HashMap<String,ArrayList<String>>(num); while ((str = in.readLine()) != null) { StringTokenizer Tok = new StringTokenizer(str); name = (String) Tok.nextElement(); cnt = Integer.valueOf(Tok.nextToken()); ArrayList<String> templist = new ArrayList<String>(cnt); while(cnt>0) { templist.add(in.readLine()); cnt--; } adj.put(name,templist); } //done creating a adjacency list I am wondering, if there is any better way to implement the adjacency list. Also, I know number of nodes right in the begining and , in the future I flatten the list as I visit nodes. Any suggestions ? Thanks

  Read the article

• A Question about .net Rfc2898DeriveBytes class?

  - by IbrarMumtaz

  What is the difference in this class? as posed to just using Encoding.ASCII.GetBytes(string object); I have had relative success with either approach, the former is a more long winded approach where as the latter is simple and to the point. Both seem to allow you to do the same thing eventually but I am struggling to the see the point in using the former over the latter. The basic concept I have been able to grasp is that you can convert string passwords into byte arrays to be used for e.g a symmetric encryption class, AesManaged. Via the RFC class but you get to use SaltValues and password when creating your rfc object. I assume its more secure but still thats an uneducated guess at best ! Also that it allows you to return byte arrays of a certain size, well something like that. heres a few examples to show you where I am coming from? byte[] myPassinBytes = Encoding.ASCII.GetBytes("some password"); or string password = "P@%5w0r]>"; byte[] saltArray = Encoding.ASCII.GetBytes("this is my salt"); Rfc2898DeriveBytes rfcKey = new Rfc2898DeriveBytes(password, saltArray); The 'rfcKey' object can now be used towards setting up the the .Key or .IV properties on a Symmetric Encryption Algorithm class. ie. RijndaelManaged rj = new RijndaelManaged (); rj.Key = rfcKey.Getbytes(rj.KeySize / 8); rj.IV = rfcKey.Getbytes(rj.Blocksize / 8); 'rj' should be ready to go ! The confusing part ... so rather than using the 'rfcKey' object can I not just use my 'myPassInBytes' array to help set-up my 'rj' object???? I have tried doing this in VS2008 and the immediate answer is NO ! but have you guys got a better educated answer as to why the RFC class is used over the other alternative I have mentioned above and why????

  Read the article

• How to make sure Solr/Lucene won't die with java.lang.OutOfMemoryError?

  - by taw

  I'm really puzzled why it keeps dying with java.lang.OutOfMemoryError during indexing even though it has a few GBs of memory. Is there a fundamental reason why it needs manual tweaking of config files / jvm parameters instead of it just figuring out how much memory is available and limiting itself to that? No other programs except Solr ever have this kind of problem. Yes, I can keep tweaking JVM heap size every time such crashes happen, but this is all so backwards. Here's stack trace of the latest such crash in case it is relevant: SEVERE: java.lang.OutOfMemoryError: Java heap space at java.util.Arrays.copyOfRange(Arrays.java:3209) at java.lang.String.<init>(String.java:216) at org.apache.lucene.index.TermBuffer.toTerm(TermBuffer.java:122) at org.apache.lucene.index.SegmentTermEnum.term(SegmentTermEnum.java:169) at org.apache.lucene.search.FieldCacheImpl$StringIndexCache.createValue(FieldCacheImpl.java:701) at org.apache.lucene.search.FieldCacheImpl$Cache.get(FieldCacheImpl.java:208) at org.apache.lucene.search.FieldCacheImpl.getStringIndex(FieldCacheImpl.java:676) at org.apache.lucene.search.FieldComparator$StringOrdValComparator.setNextReader(FieldComparator.java:667) at org.apache.lucene.search.TopFieldCollector$OneComparatorNonScoringCollector.setNextReader(TopFieldCollector.java:94) at org.apache.lucene.search.IndexSearcher.search(IndexSearcher.java:245) at org.apache.lucene.search.Searcher.search(Searcher.java:171) at org.apache.solr.search.SolrIndexSearcher.getDocListNC(SolrIndexSearcher.java:988) at org.apache.solr.search.SolrIndexSearcher.getDocListC(SolrIndexSearcher.java:884) at org.apache.solr.search.SolrIndexSearcher.search(SolrIndexSearcher.java:341) at org.apache.solr.handler.component.QueryComponent.process(QueryComponent.java:182) at org.apache.solr.handler.component.SearchHandler.handleRequestBody(SearchHandler.java:195) at org.apache.solr.handler.RequestHandlerBase.handleRequest(RequestHandlerBase.java:131) at org.apache.solr.core.SolrCore.execute(SolrCore.java:1316) at org.apache.solr.servlet.SolrDispatchFilter.execute(SolrDispatchFilter.java:338) at org.apache.solr.servlet.SolrDispatchFilter.doFilter(SolrDispatchFilter.java:241) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447) at java.lang.Thread.run(Thread.java:619)

  Read the article

• Optimal Serialization of Primitive Types

  - by Greg Dean

  We are beginning to roll out more and more WAN deployments of our product (.Net fat client w/ IIS hosted Remoting backend). Because of this we are trying to reduce the size of the data on the wire. We have overridden the default serialization by implementing ISerializable (similar to this), we are seeing anywhere from 12% to 50% gains. Most of our efforts focus on optimizing arrays of primitive types. I would like to know if anyone knows of any fancy way of serializing primitive types, beyond the obvious? For example today we serialize an array of ints as follows: [4-bytes (array length)][4-bytes][4-bytes] Can anyone do significantly better? The most obvious example of a significant improvement, for boolean arrays, is putting 8 bools in each byte, which we already do. Note: Saving 7 bits per bool may seem like a waste of time, but when you are dealing with large magnitudes of data (which we are), it adds up very fast. Note: We want to avoid general compression algorithms because of the latency associated with it. Remoting only supports buffered requests/responses(no chunked encoding). I realize there is a fine line between compression and optimal serialization, but our tests indicate we can afford very specific serialization optimizations at very little cost in latency. Whereas reprocessing the entire buffered response into new compressed buffer is too expensive.

  Read the article

• Why can't the compiler/JVM just make autoboxing "just work"?

  - by Pyrolistical

  Autoboxing is rather scary. While I fully understand the difference between == and .equals I can't but help have the follow bug the hell out of me: final List<Integer> foo = Arrays.asList(1, 1000); final List<Integer> bar = Arrays.asList(1, 1000); System.out.println(foo.get(0) == bar.get(0)); System.out.println(foo.get(1) == bar.get(1)); That prints true false Why did they do it this way? It something to do with cached Integers, but if that is the case why don't they just cache all Integers used by the program? Or why doesn't the JVM always auto unbox to primitive? Printing false false or true true would have been way better. EDIT I disagree about breakage of old code. By having foo.get(0) == bar.get(0) return true you already broke the code. Can't this be solved at the compiler level by replacing Integer with int in byte code (as long as it is never assigned null)

  Read the article

• Replicating SQL's 'Join' in Python

  - by Daniel Mathews

  I'm in the process of trying to switch from R to Python (mainly issues around general flexibility). With Numpy, matplotlib and ipython, I've am able to cover all my use cases save for merging 'datasets'. I would like to simulate SQL's join by clause (inner, outer, full) purely in python. R handles this with the 'merge' function. I've tried the numpy.lib.recfunctions join_by, but it critical issues with duplicates along the 'key': join_by(key, r1, r2, jointype='inner', r1postfix='1', r2postfix='2', defaults=None, usemask=True, asrecarray=False) Join arrays r1 and r2 on key key. The key should be either a string or a sequence of string corresponding to the fields used to join the array. An exception is raised if the key field cannot be found in the two input arrays. Neither r1 nor r2 should have any duplicates along key: the presence of duplicates will make the output quite unreliable. Note that duplicates are not looked for by the algorithm. source: http://presbrey.mit.edu:1234/numpy.lib.recfunctions.html Any pointers or help will be most appreciated!

  Read the article

• priority queue with limited space: looking for a good algorithm

  - by SigTerm

  This is not a homework. I'm using a small "priority queue" (implemented as array at the moment) for storing last N items with smallest value. This is a bit slow - O(N) item insertion time. Current implementation keeps track of largest item in array and discards any items that wouldn't fit into array, but I still would like to reduce number of operations further. looking for a priority queue algorithm that matches following requirements: queue can be implemented as array, which has fixed size and _cannot_ grow. Dynamic memory allocation during any queue operation is strictly forbidden. Anything that doesn't fit into array is discarded, but queue keeps all smallest elements ever encountered. O(log(N)) insertion time (i.e. adding element into queue should take up to O(log(N))). (optional) O(1) access for *largest* item in queue (queue stores *smallest* items, so the largest item will be discarded first and I'll need them to reduce number of operations) Easy to implement/understand. Ideally - something similar to binary search - once you understand it, you remember it forever. Elements need not to be sorted in any way. I just need to keep N smallest value ever encountered. When I'll need them, I'll access all of them at once. So technically it doesn't have to be a queue, I just need N last smallest values to be stored. I initially thought about using binary heaps (they can be easily implemented via arrays), but apparently they don't behave well when array can't grow anymore. Linked lists and arrays will require extra time for moving things around. stl priority queue grows and uses dynamic allocation (I may be wrong about it, though). So, any other ideas?

  Read the article

• 3 index buffers

  - by bobobobo

  So, in both D3D and OpenGL there's ability to draw from an index buffer. The OBJ file format however does something weird. It specifies a bunch of vertices like: v -21.499660 6.424470 4.069845 v -25.117170 6.418100 4.068025 v -21.663851 8.282170 4.069585 v -21.651890 6.420180 4.068675 v -25.128481 8.281520 4.069585 Then it specifies a bunch of normals like.. vn 0.196004 0.558984 0.805680 vn -0.009523 0.210194 -0.977613 vn -0.147787 0.380832 -0.912757 vn 0.822108 0.567581 0.044617 vn 0.597037 0.057507 -0.800150 vn 0.809312 -0.045432 0.585619 Then it specifies a bunch of tex coords like vt 0.1225 0.5636 vt 0.6221 0.1111 vt 0.4865 0.8888 vt 0.2862 0.2586 vt 0.5865 0.2568 vt 0.1862 0.2166 THEN it specifies "faces" on the model like: f 1/2/5 2/3/7 8/2/6 f 5/9/7 6/3/8 5/2/1 So, in trying to render this with vertex buffers, In OpenGL I can use glVertexPointer, glNormalPointer and glTexCoordPointer to set pointers to each of the vertex, normal and texture coordinate arrays respectively.. but when it comes down to drawing with glDrawElements, I can only specify ONE set of indices, namely the indices it should use when visiting the vertices. Ok, then what? I still have 3 sets of indices to visit. In d3d its much the same - I can set up 3 streams: one for vertices, one for texcoords, and one for normals, but when it comes to using IDirect3DDevice9::DrawIndexedPrimitive, I can still only specify ONE index buffer, which will index into the vertices array. So, is it possible to draw from vertex buffers using different index arrays for each of the vertex, texcoord, and normal buffers (EITHER d3d or opengl!)

  Read the article

• can a OOM be caused by not finding enough contiguous memory?

  - by raticulin

  I start some java code with -Xmx1024m, and at some point I get an hprof due to OOM. The hprof shows just 320mb, and give me a stack trace: at java.util.Arrays.copyOfRange([CII)[C (Arrays.java:3209) at java.lang.String.<init>([CII)V (String.java:215) at java.lang.StringBuilder.toString()Ljava/lang/String; (StringBuilder.java:430) ... This comes from a large string I am copying. I remember reading somewhere (cannot find where) what happened is these cases is: process still has not consumed 1gb of memory, is way below even if heap still below 1gb, it needs some amount of memory, and for copyOfRange() it has to be continuous memory, so even if it is not over the limit yet, it cannot find a large enough piece of memory on the host, it fails with an OOM. I have tried to look for doc on this (copyOfRange() needs a block of continuous memory), but could not find any. The other possible culprit would be not enough permgen memory. Can someone confirm or refute the continuous memory hypothesis? Any pointer to some doc would help too.

  Read the article

< Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >