Search Results

Search found 8770 results on 351 pages for 'sun zfs storage 7000 appl'.

Page 225/351 | < Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >

• Slow disk transfer rate

  - by Nooklez

  I have problem with slow disk transfer rate. It's static files server for our website. I was making backup of data and noticed that tar is very slow. So I did hdparm -t and... hdparm -t /dev/sda3 /dev/sda3: Timing buffered disk reads: 6 MB in 4.70 seconds = 1.28 MB/sec It's low traffic hour now on our site, so huge I/O traffic is not a reason (iotop show less than 1 MB/s). It's RAID10 setup (2x2 SATA drives). Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy ------------------------------------------------------------------------------ u0 RAID-10 OK - - 64K 1396.96 W ON VPort Status Unit Size Type Phy Encl-Slot Model ------------------------------------------------------------------------------ p0 OK u0 698.63 GB SATA 0 - WDC WD7500AADS-00M2 p1 OK u0 698.63 GB SATA 1 - WDC WD7500AADS-00M2 p2 OK u0 698.63 GB SATA 2 - WDC WD7500AADS-00M2 p3 OK u0 698.63 GB SATA 3 - WDC WD7500AADS-00M2 We have recently changed almost all components of server (excluding 3ware controller + disks). And I think problems started since then. Can it be configuration problem or hardware? EDIT: I found something like that in dmesg [166843.625843] irq 16: nobody cared (try booting with the "irqpoll" option) [166843.625846] Pid: 0, comm: swapper Not tainted 3.1.5-gentoo #3 [166843.625847] Call Trace: [166843.625848] <IRQ> [<ffffffff810859d5>] __report_bad_irq+0x35/0xc1 [166843.625856] [<ffffffff81085cec>] note_interrupt+0x165/0x1e1 [166843.625859] [<ffffffff8108445f>] handle_irq_event_percpu+0x16f/0x187 [166843.625861] [<ffffffff810844a9>] handle_irq_event+0x32/0x51 [166843.625863] [<ffffffff8108640b>] handle_fasteoi_irq+0x75/0x99 [166843.625866] [<ffffffff810039d7>] handle_irq+0x83/0x8b [166843.625868] [<ffffffff810036ad>] do_IRQ+0x48/0xa0 [166843.625871] [<ffffffff8155082b>] common_interrupt+0x6b/0x6b [166843.625872] <EOI> [<ffffffff812981e8>] ? acpi_safe_halt+0x22/0x35 [166843.625877] [<ffffffff812981e2>] ? acpi_safe_halt+0x1c/0x35 [166843.625879] [<ffffffff81298216>] acpi_idle_do_entry+0x1b/0x2b [166843.625881] [<ffffffff81298276>] acpi_idle_enter_c1+0x50/0x99 [166843.625884] [<ffffffff813b792a>] cpuidle_idle_call+0xed/0x171 [166843.625886] [<ffffffff81001257>] cpu_idle+0x55/0x81 [166843.625888] [<ffffffff81532a69>] rest_init+0x6d/0x6f [166843.625891] [<ffffffff81aa1aca>] start_kernel+0x329/0x334 [166843.625893] [<ffffffff81aa12a6>] x86_64_start_reservations+0xb6/0xba [166843.625894] [<ffffffff81aa139c>] x86_64_start_kernel+0xf2/0xf9 [166843.625896] handlers: [166843.625898] [<ffffffff812dc8de>] twl_interrupt [166843.625900] Disabling IRQ #16 It's related to problem? EDIT #2: Based on feedback in comments, here is more informations. cat /proc/interrupts 16: 390813 0 0 0 IO-APIC-fasteoi 3w-sas Controller model: [ 1.095350] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 1.095467] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 1.095641] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 1.095787] 3w-sas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.095881] 3w-sas 0000:01:00.0: setting latency timer to 64 [ 1.910801] 3w-sas: scsi0: Found an LSI 3ware 9750-4i Controller at 0xfe560000, IRQ: 16. [ 2.216537] 3w-sas: scsi0: Firmware FH9X 5.08.00.008, BIOS BE9X 5.07.00.011, Phys: 8. [ 2.216836] scsi 0:0:0:0: Direct-Access LSI 9750-4i DISK 5.08 PQ: 0 ANSI: 5 And motherboard: description: Motherboard product: P8H67-M vendor: ASUSTeK Computer INC.

  Read the article

• Weird problem with connection from putty to ubuntu server via SSH

  - by Eye of Hell

  Hello. I have an Ubuntu Server 9.10 box with sshd configured. I have two computers with Windows 7 professional and putty installed. Day ago, both computers was able to connect ubuntu server both via putty and plink. I have installed sun-java6-jre on ubuntu server, and now have a weird problem. First Windows 7 computer can still connect with both putty GUI and command-line plink. Second computer can connect via putty gui, but if i issue plink command that works perfectly on first computer: plink www.hostname.tk -i c:\users\username\documents\key\private.ppk I get login prompt, enter same username as on first computer, and receive following weird error message: bash: www.hostname.tk: command not found I can't see any difference between my Windows 7 computers :(. The ppk key used is same (i copied it multiple times both ways). hostname and username are same. Anyone have any ideas why such thing happens and what can i do in order to troubleshoot and fix it?

  Read the article

• Performance of Cluster Shared Volume file copy from SAN

  - by Sequenzia

  I am hoping someone can help me out with a strange issue. We are running a Microsoft Failover Cluster with Server 2008 R2 and an Equallogic PS4000 SAN. Our main configuration has 2 Dell Poweredge T710 Servers in the cluster. We have CSV and Quorm setup. The servers each have 10 Broadcom 1Gb NICs. Right now 4 of the NICS are on the iSCSI network for accessing the SAN. They use MPIO and the Dell HIT pack. We have 5 VMs running on each node and everything runs smooth. No noticeable performance issues or anything. From the SAN I can see the 4 iSCSI connections from each server to each volume (CSV and Quorm). Again, it seems to perform great. The problem I am running into is with backups. I have tried a few backup programs like backupchain and Veeam. The problem is both of them are very very slow to backup the VMs. For instance I have a 500GB (fixed disc) VHD that’s running on the cluster. It takes over 18 hours to backup that VHD and that’s with compression and depuping turned off which is supposed to be the fasted. We also have a separate server that is just for backups. It has a lot of directed attached storage. As part of the troubleshooting I decided to bring that server into the cluster as a node. It now has access to the CSV and can read from C:\clusterstorage\volume1 which is where our VHDs live. This backup server only has 2 NICs. 1 NIC is going to the iSCSI network and the other is just on the main network. It has Intel NICS in it without any sort of MPIO or teaming. So with the 3rd server now in the cluster I started doing some benchmarking. I have a test VHD that’s about 7GBs that’s stored in the CSV. I have tested file copying that VHD from all 3 servers to directed attached storage in the respective server. The 2 Dell servers that are the main nodes in the cluster (they house the VMs) are reading that file at about 20Mbs/Sec. Which at that rate is way to slow for the backups. The other server which only has 1 NIC to the SAN is reading at around 100Mbs/Sec. I spent a few hours on the phone with Dell today about this . We went through all kind of tests and he was pretty dumb founded. He really has no idea why that server with only 1 NIC is reading about 5 times as fast as the servers with 4 NICS and MPIO. We looked at the network utilization of the NICs while the file copy was going on. The servers with the 4 NICs had a small increase of activity during the file copy but they only went up to around 8-10% on all 4 NICs. The other server with the 1 NIC jumped up to over 80% during the file copy. I plan on doing some more testing after hours and calling Dell back tomorrow but I really am confused (and so is Dell’s support rep) why I cannot get faster file copy access to the CSV on those servers. Anyone have any input on this? Any feedback would be greatly appreciated. Thanks in advance.

  Read the article

• How to refresh open source software pkg manager on oldish OpenSolaris?

  - by Luke404

  I'm being presented with an OpenSolaris vps, actually a Solaris Container, which is based on SXCE snv_121 and is active since mid 2007: the good old Sun days, IIRC even before the Indiana stuff! For various reasons the system itself can't be rebuilt/upgraded but we can do whatever we want with the additional package manager on it. My Solaris skills and especially knowledge of the free package managers ecosystem is a bit rusty so I don't know what I can actually use while keeping the somewhat oldish base system. Currently there is pkg-get using some older Blastwave mirror, it has been used to install things such as Apache2, PHP, Python, Nagios. I would like to remove all the old rusty stuff and all of Blastwave, and start fresh with some newer package distribution. Can the current Blastwave system be used on that snv_121? Is there any better alternative still compatible with that system (eg. OpenCSW or anything else) ?

  Read the article

• Address Rewriting and Masquerading postfix

  - by Shalini Tripathi

  This is header of mail that i have received from mailchimp: Return-Path: bounce-mc.us2_6034522.1358370-achal.tomar58=gmail.com@mail76.us2.mcsv.net> Received: from mail76.us2.mcsv.net (mail76.us2.mcsv.net. [173.231.139.76]) by mx.google.com with ESMTP id er6si2501863qab.62.2012.06.03.05.09.29; Sun, 03 Jun 2012 05:09:29 -0700 (PDT) My query is how they add the received from header to the Return-Path dyanamically,i also want to implement the same in my mail server,i have tried address masquereading in postfix but it was not of much help may be i am misssing something. My mail server has postfix as an MTA and i have centOs 5 as an OS.

  Read the article

• Cage nuts - which way to insert them?

  - by Ingmar Hupp

  Cage nuts can be inserted (in square holes) either with the flaps horizontal or vertical. I've seen and used both methods, but am still not sure which is best. Is there a recommended way of inserting them? If so, why is it the best way? From my own experience, the horizontal way (on the left) seems slightly better for no other reason than making it easier to insert or pry out the cage nut in a full rack (with the units above and below being populated), for example when replacing cage nuts with a snap-in rail. Edit: Major vendors each seem to have their own preference too: Horizontal: IBM, Cisco, APC Vertical: HP (and Compaq), Sun/Oracle, Dell

  Read the article

• How would I force Debian to use the physical sector size on a hard disk?

  - by Confused User

  I just purchased a few new 3TB WD drives. These have physical 4k sectors, but there is some sort of layer which is providing 512B logical sectors (see the partition table below). In order to attempt to get some more speed out of my hard drives, I would like to get rid of this logical layer and actually use the physical 4k sectors. However, I can't figure out how to do this (or even if it's possible) from the man pages of fdisk and parted, or from searching Google. Does anybody know how this could be done? As to why this is relevant, this page demonstrates that meerly aligning the sectors properly can already make up to a 25% speed difference for reads, and more than 2500% for writes in some cases! Getting rid of the logical sectors in favor of the physicals ones should improve speeds even more. Thanks! $ parted /dev/sdc GNU Parted 2.3 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) print Model: ATA WDC WD30EZRX-00M (scsi) Disk /dev/sdc: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 3001GB 3001GB zfs 9 3001GB 3001GB 8389kB P.S. I don't care about the data on the drives, I was just playing with different file systems. Also, this is my first time posting here, so please let me know if my posts should be formatted differently, etc.

  Read the article

• Drobo-like linux file server - how do I do it?

  - by John Hunt

  I've been pondering for a long time about how I can set up a server which operates much like the Drobo storage thing. The reasons I don't actually want a drobo is because I've heard scare stories, plus I'd like to do this on the cheap. So ideally I'm looking for something like lvm so I can create a logical volume that spans many hard disks of varying sizes... obviously that only offers redundancy if I put the LV on a raid array (as far as I know..) I have however been reading about technologies such as Microsoft's drive extender which duplicates files at the filesystem level and makes sure that the mirrored files are on a different phyiscal disk.. does anyone know or recommend a filesystem or method like this as it'll hopefully make much better use of the space available than raid ever could. Performance isn't an issue, I'd just really like to make the most of the hard disks I have lying around whilst having a bit of redundancy incase a disk dies. I understand full well that this is no replacement for a backup, but I'll only be storing files of medium importance and using the nas itself as a backup of my main pc and other systems. Thanks in advance! I'm hoping zfs or btrfs or something can do something clever for me :)

  Read the article

• Unable to open Synaptic manager, unable to install packages, what can I do?

  - by Omkant

  I have installed the sun java6-jdk package but it's not installed completely. After that it's giving an error when I try to install a new package. In terminal when I write "sudo apt-get install [any package name]" I get an error like this: E: could not get lock /var/lib/dpkg/lock -open (11 Resource temporable ) E: Unable to lock the administration directory (/var/lib/dpkg). Also Synaptic package manager is not opening and none of the packages are downloading through any of the methods I know. Please help!

  Read the article

• reduce memory footprint of java virtual machine

  - by Lorenzo Boccaccia

  I've a citrix server where multiple users use a multiple java application. Is there a way to reduce the memory footprint of the jvm itself? The max heap is already set fairly low (64MB), as the permgen (32MB) space and we're to the point that the jvm itself uses way more memory than the application itself (the committed area is around 350MB) I'm looking for a way to reduce the jvm ram usage or to make the all the applications run within the same jvm or any other way of sharing common pages between running jvm (if possible) or try switch to switch to a jvm if a jvm exists having optimizations relative to this scenario currently using windows 2003 server and sun java virtual machine 1.6

  Read the article

• Access forbidden! using xampp on macosx 10.5

  - by erikvold

  I installed xampp back around January 2009, and CF8 to test coldfusion on my macbook (note: I do not think that this issue is related to CF, but only xampp). I only ever used the apache part of xampp, and this was working for over a year. In the last couple of months at the most I've started getting the following error message (even for none CF sites, and non .cfm pages, the error occurs for .html files..): Access forbidden! You don't have permission to access the requested object. It is either read-protected or not readable by the server. If you think this is a server error, please contact the webmaster Error 403 erikvold.lan Sun Mar 21 20:58:45 2010 Apache/2.2.11 (Unix) DAV/2 mod_ssl/2.2.11 OpenSSL/0.9.7l PHP/5.2.9 mod_perl/2.0.4 Perl/v5.10.0 As far as I recall I haven't made any change, so it's like it was working for a year then just stopped working..

  Read the article

• AWS EC2: How to determine whether my EC2/scalr AMI was hacked? What to do to secure it?

  - by Niro

  I received notification from Amazon that my instance tried to hack another server. there was no additional information besides log dump: Original report: Destination IPs: Destination Ports: Destination URLs: Abuse Time: Sun May 16 10:13:00 UTC 2010 NTP: N Log Extract: External 184.xxx.yyy.zzz, 11.842.000 packets/300s (39.473 packets/s), 5 flows/300s (0 flows/s), 0,320 GByte/300s (8 MBit/s) (184.xxx.yyy.zzz is my instance ip) How can I tell whether someone has penetrated my instance? What are the steps I should take to make sure my instance is clean and safe to use? Is there some intrusion detection techinque or log that I can use? Any information is highly appreciated.

  Read the article

• GF 3.0.1 + Virtual Server: www.myhost.com:8080/projectname-war => www.myhost.com. How?

  - by Harry Pham

  I need to change www.myhost.com:8080/myproject-war to www.myhost.com. This is what I try. In admin console in Glassfish 3.0.1, I create a http-listener-3 with port 9090 and address 0.0.0.0 (I want to have port 80, but got access-denied or some sort). I then create a virtual server call scholar, with Id=scholar, Hosts=${com.sun.aas.hostName}, Network Listeners: http-listener-3, Default Web Module=project#project-war.war(it is the only option from the drop down list since I only deploy 1 app). Then under Applications, I set the virtual server of the application to be scholar. Save and restart. I try localhost:9090, and expecting that it will load my project like as if I type localhost:9090/project-war. But it does not. I already set the Default Web Module, to be the project, why doesnt it load the project by default?

  Read the article

• Solaris syslog.conf. What are root and operator?

  - by cjavapro

  In /etc/syslog.conf #ident "@(#)syslog.conf 1.5 98/12/14 SMI" /* SunOS 5.0 */ # # Copyright (c) 1991-1998 by Sun Microsystems, Inc. # All rights reserved. # # syslog configuration file. # # This file is processed by m4 so be careful to quote (`') names # that match m4 reserved words. Also, within ifdef's, arguments # containing commas must be quoted. # *.err;kern.notice;auth.notice /dev/sysmsg *.err;kern.debug;daemon.notice;mail.crit /var/adm/messages *.alert;kern.err;daemon.err operator *.alert root *.emerg * # if a non-loghost machine chooses to have authentication messages # sent to the loghost machine, un-comment out the following line: #auth.notice ifdef(`LOGHOST', /var/log/authlog, @loghost) mail.debug ifdef(`LOGHOST', /var/log/syslog, @loghost) # # non-loghost machines will use the following lines to cause "user" # log messages to be logged locally. # ifdef(`LOGHOST', , user.err /dev/sysmsg user.err /var/adm/messages user.alert `root, operator' user.emerg * ) I googled some and it seems that root and operator mean email to root and to operator. Is this correct?

  Read the article

• How to make a Linux software RAID1 detect disc corruption?

  - by Paul

  This is one of the nightmare days: A virtualized server running on a Linux SW-RAID1 runs a VM that exhibits random segfaults in seemingly random codechunks. While debugging I find that a file gives different md5sums on each and every run. Digging deeper I find this: The raw disc partitions that make up the RAID1 mirror contain 2 bit-differences and ca. 9 sectors are completely empty on one disc and filled with data on the other disc. Obviously Linux gives back a sector from a undeterministically chosen disc of the mirror set. So sometimes the same sector is returned OK, sometimes the corrupted is given back. The docs say: RAID cannot and is not supposed to guard against data corruption on the media. Therefore, it doesn't make any sense either, to purposely corrupt data (using dd for example) on a disk to see how the RAID system will handle that. It is most likely (unless you corrupt the RAID superblock) that the RAID layer will never find out about the corruption, but your filesystem on the RAID device will be corrupted. Thanks. That will help me sleep. :-/ Is there a way to have Linux at least detect this corruption by using sector checksumming or something like that? Would this be detected in a RAID5 setup? Is this the moment I wish I used ZFS or btrfs (once it becomes usable without uber-admin capabilities)?

  Read the article

• installing jdk1.7.0 on Ubuntu 11.04 machine

  - by Yogesh

  I am facing a problem while trying to install Java 7 on Ubuntu. The following are the steps that I performed for installing: I installed the setup file from the link given below: wget http://download.oracle.com/otn-pub/java/jdk/7u1-b08/jdk-7u1-linux-x64.tar.gz I have a file: jdk-7u1-linux-x64.tar.gz I Untared it: tar -xvf jdk-7u1-linux-x64.tar.gz sudo mv ./jdk1.7.0_01 /usr/lib/jvm/jdk1.7.0_01 sudo update-alternatives –config java Here it gave me the following output: There is only one alternative in link group java: /usr/lib/jvm/java-6-sun/jre/bin/java Nothing to configure. sudo update-alternatives --install /usr/bin/java java /usr/lib/jvm/jdk1.7.0_01/jre/bin/java 1(I entered 1 here.) sudo update-alternatives --config java java -version. It showed the following output java version "1.6.0_26" Java(TM) SE Runtime Environment (build 1.6.0_26-b03) Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02, mixed mode) I am not sure if jdk1.7.0 is installed as its showing the version as 1.6.0_26.

  Read the article

• Supermicro IPMI on MBD-X8DAH+-F-O motherboard. Keyboard and mouse do not work after booting Windows Server 2008 R2

  - by LDelgado

  Hell Everyone, I built a server with the mentioned motherboard. I installed Windows Server 2008 R2 Enterprise on this server. IPMI is integrated on the motherboard with its own dedicated NIC. I've got that NIC configured with its own IP address. I can remote into it using IPMI, and I can remotely control the server settings before booting the OS ( BIOS, RAID configuration, etc). When the OS boots, I lose the mouse and keyboard. I cannot use the keyboard or mouse when installing the OS either. So the Keyboard and Mouse only work when no OS is loaded. Once the OS loads I lose it - that is my problem. I've been doing some research and trying a few things, but I have not been successful in fixing this issue. I may be wrong, but based on the things I've found online, it seems that the problem could be caused by the way the OS handles USB. The server is headless. There is no keyboard, mouse, or monitor plugged into it. When I boot up the OS and remote into it, I cannot see a mouse or keyboard listed in the Device Manager. Based on what I've read, it seems that the OS should detect a mouse and a keyboard when connecting remotely via IPMI. The following are the solutions I've tried. Nothing has worked so far: I've updated the firmware of the IPMI component to the latest firmware - 1.33. I made sure that the mouse mode was set to Absolute (Windows OS). I've loaded the factory defaults several times. I've enabled Port64h/60h Emulation under the USB settings in the BIOS. I've disabled USB legacy support in the BIOS. I made sure the firewall wasn't blocking IPMI (disabled the firewall). And that's about it. I've found threads in some forums from people having the same issue as me, but they were not running the same OS. They were either running Linux or FreeBSD. Most of them fixed their problem by selecting the right mouse mode (Linux in their case). There was one other that solved the problem by disabling USB Mass Storage mode. He stated "When I set it to disable USB Mass Storage when no image is loaded, the ukbd came alive, and I'm typing this on the IPMI Console. " source: http://freebsd.1045724.n5.nabble.com/IPMI-Console-No-luck-once-OS-is-booted-td3967868.html I suspect the solution described in the previous paragraph is somehow related to my problem. I've found several threads on the internet with issues describing the same problem, but none of them were with Windows Server 2008 R2. Again, I may be wrong, but it seems like that could be the issue. I just don't know how I go about applying a solution in Windows Server 2008 R2. In any case, I could use your expertise. Maybe I am missing something, or maybe I'm on the right track. Your help is much appreciated. Thank you in advance,

  Read the article

• Why does VirtualBox want my attention every morning?

  - by Ken

  I'm running Vista 64-bit Ultimate on this PC. On it, I've installed VirtualBox, and in that I'm running Linux. Everything's working great. I leave it running all the time. When I come in in the morning, every time, the "Sun VirtualBox" item in the Windows taskbar is bright orange, like it's trying to get my attention. What would cause this? I'm curious both if somebody has an idea of something VirtualBox might do that warrants this attention-grab, or what to look for in the VB logs to find out what causes this. I'm sure it's harmless, but I'd like to stop it if I can.

  Read the article

• verisign certificate into jboss server SSL

  - by rfders

  i'm trying to enable jboss to uses ssl protocol using a previously generated certificate from verisign, i imported both certificate, server certificate and ca certificate into the keytore file, and i configured the server.xml to use that keystore and activate ssl protocol, then when i run the jboss, I got this error "certificate or key corresponds to the SSL cipher suites which are enabled" Question, reading some post on internet, i found that every example was made it generating a Certificate Request, it stricly necesary to do that if i already have the server certificate and that CSR has to be imported into the keystore as well ? at this point i'm very confused about this issue, i tried almost every solutions posted in several forums but till now i haven't any luck !! can you give me some tips in order to solve this problem. thanks in advance this are my keystore file: Keystore type: jks Keystore provider: SUN Your keystore contains 2 entries j2ee, Dec 29, 2009, trustedCertEntry, Certificate fingerprint (MD5): 69:CC:2D:2A:2D:EF:C4:DB:A2:26:35:57:06:29:7D:4C ugent, Dec 29, 2009, trustedCertEntry, Certificate fingerprint (MD5): AC:D8:0E:A2:7B:B7:2C:E7:00:DC:22:72:4A:5F:1E:92 and my server.xml configuration:

  Read the article

• Web Applications under Apache Tomcat with multiple directory contexts

  - by goran

  I have two webapps, prod-1.2.1.war and test-2.0.0.war. If I put these straight into the "tomcat/webapps"-folder, they'll get deployed as; hXXp://localhost/prod-1.2.1/ hXXp://localhost/test-2.0.0/ This works but really I would like them to show up as; hXXp://localhost/vegshop/prod/ hXXp://localhost/vegshop/test/ As you see I somehow would like the "vegshop" to be included in the context path. I also would like the version-numbering to disappear without having to rename the WAR-files. Thank you. This is Apache Tomcat v6.0 under Linux 2.6, running SUN JDK 1.6.

  Read the article

• Amazon EC2 Instance - m1.medium Ubuntu 12.04 - Started to crash three days ago

  - by Joy

  The environment: Amazon EC2 Instance - m1.medium Ubuntu 12.04 Apache 2.2.22 - Running a Drupal Site Using MySQL DB Server RAM info: ~$ free -gt total used free shared buffers cached Mem: 3 1 2 0 0 0 -/+ buffers/cache: 0 2 Swap: 0 0 0 Total: 3 1 2 Hard drive info: Filesystem Size Used Avail Use% Mounted on /dev/xvda1 7.9G 4.7G 2.9G 62% / udev 1.9G 8.0K 1.9G 1% /dev tmpfs 751M 180K 750M 1% /run none 5.0M 0 5.0M 0% /run/lock none 1.9G 0 1.9G 0% /run/shm /dev/xvdb 394G 199M 374G 1% /mnt The problem About two days ago the site started failing becaue the MySQL server was shut down by Apache with the following message: kernel: [2963685.664359] [31716] 106 31716 226946 22748 0 0 0 mysqld kernel: [2963685.664730] Out of memory: Kill process 31716 (mysqld) score 23 or sacrifice child kernel: [2963685.664764] Killed process 31716 (mysqld) total-vm:907784kB, anon-rss:90992kB, file-rss:0kB kernel: [2963686.153608] init: mysql main process (31716) killed by KILL signal kernel: [2963686.169294] init: mysql main process ended, respawning That states that the VM was occupying 0.9GB, but my Ram has 2GB free, so 1GB was still left free. I understand that in Linux applications can allocate more memory than physically available. I don't know if this is the problme, it's the first time that it has started to happen. Obviously, the MySQL server tries to restart, but there's no memory for it apparently and it won't restart. Here is its error log: Plugin 'FEDERATED' is disabled. The InnoDB memory heap is disabled Mutexes and rw_locks use GCC atomic builtins Compressed tables use zlib 1.2.3.4 Initializing buffer pool, size = 128.0M InnoDB: mmap(137363456 bytes) failed; errno 12 Completed initialization of buffer pool Fatal error: cannot allocate memory for the buffer pool Plugin 'InnoDB' init function returned error. Plugin 'InnoDB' registration as a STORAGE ENGINE failed. Unknown/unsupported storage engine: InnoDB [ERROR] Aborting [Note] /usr/sbin/mysqld: Shutdown complete I simply restarted the Mysql service. About two hours later it happened again. I restarted it. Then it happened again 9 hours later. So then I thought of the MaxClients parameter of apache.conf, so I went to check it out. It was set at 150. I decided to drop it down to 60. As so: <IfModule mpm_prefork_module> ... MaxClients 60 </IfModule> <IfModule mpm_worker_module> ... MaxClients 60 </IfModule> <IfModule mpm_event_module> ... MaxClients 60 </IfModule> Once I did that, I had the apache2 service restart and it all went smoothly for 3/4 of a day. Since at night the MySQL service shut down once again, but this time it wasn't killed by the Apache2 service. Instead it called the OOM-Killer with the following message: kernel: [3104680.005312] mysqld invoked oom-killer: gfp_mask=0x201da, order=0, oom_adj=0, oom_score_adj=0 kernel: [3104680.005351] [<ffffffff81119795>] oom_kill_process+0x85/0xb0 kernel: [3104680.548860] init: mysql main process (30821) killed by KILL signal Now I'm out of ideas. Some articles state that the ideal thing to do is change the kernel behaviour with the following (include it to the file /etc/sysctl.conf ) vm.overcommit_memory = 2 vm.overcommit_ratio = 80 So no overcommits will take place. I'm wondering if this is the way to go? Keep in mind I'm no server administrator, I have basic knowldege. Thanks a bunch in advance.

  Read the article

• What are the different Partition Types listed in gparted?

  - by keithterrill

  I am reformatting an older 40meg drive using gparted from within a Linux distro. The drive had no partitions and no partition table, so I am creating a new Partition Table via the Advanced option. The default partition type is msdos, which I think is the same as MBR in parted. The description sounds right: maximum of 4 primary partitions, or 3 primary and 1 extended partition, maximum of 2 tb with 512b sectors. There are a number of other options, gpt being one. Which I would use if the drive was greater than 2 tb. The following partition types are also available: apx, amiga, bsd, dvh, mac, pc98, sun, loop. The question: what are these other types and where can I find a description or discussion about them? Secondary question: is there any reason to not use gpt on a smaller drive? Thank-you

  Read the article

• SQL server periodically gets disconnected

  - by Maulin

  Hi, Our environment is: Windows Server 2003, Service Pack 2 SQL Server Express 2005 SQLServer JDBC driver 1.2 (also tried Jtds) Sun JDK 1.6 (we tried this on JDK 1.5 as well) There is no virus protection software on the host, and no firewall is enabled. We have Web application deployed in JBOSS 4.0.2. Our problem is that the JDBC connection to SQL server periodically gets disconnected, and then we can't reconnect to the SQL server at all, unless we physically restart the server on which JBOSS deployed. we are getting following error in log. Software caused connect on abort: recv failed Note: We are able to connect to SQL server using sample java test class. Any suggestions would be most appreciated, as this is a serious, mission-criticial problem for us right now.

  Read the article

• Plesk and Apache configuration gives me 403 on all sites

  - by Michael Stark

  My friends server running Plesk 9.2 with Apache. Now there were some problems the last days where he couldn't tell me what exactly has happened. The situation now is the following: He has a lot of domains in it. When somebody visit any domain it shows up a 403. I checked the logs and saw the problem [Sun Jun 24 08:24:47 2012] [error] [client XX.XX.XX.XX] script '/srv/www/htdocs/index.php' not found or unable to stat Apache should route to '/srv/www/vhosts/domain.tld/htdocs/index.php' instead of /srv/www/htdocs/index.php It's doing that on all of the domains. Can you tell me whats wrong and how to fix it?

  Read the article

• java -version doesn't write to stdout?

  - by Zárate

  Hi there, Either I'm doing something silly or Sun is. How come something like: java -version > version.txt Still prints out to stdout and leaves version.txt empty? I'm checking out the exit code, and it's still 0, so is not that's writing to stderr. I need this because I'm building a test-environment tool and want to check if the version of Java is adequate, I was planning to catch that version output, but now I'm stuck. I'm on OS X Leopard, Java version 1.6.0_20. Any ideas? Cheers, Juan

  Read the article

< Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >