Search Results

Search found 8923 results on 357 pages for 'wireless keyboard'.

Page 225/357 | < Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >

• How can I disable 'natural breaks' in Workrave?

  - by Pixelastic

  I've just discovered Workrave, and was trying to use it along the Pomodoro technique (5mn break every 25mn). But the concept of 'natural breaks' of Workrave seems to interfere with what I'm trying to achieve. Workrave tries to guess that I'm doing a natural break if I stop using my mouse and keyboard for longer than 5s. It then stops the work timer, and start counting time as if I was doing my break. Here is a typical example : I've configured a 5mn rest break every 25mn. I start working. 10mn later, I receive a phone call, or start talking with a colleague, or any work-related action that do not need either keyboard nor mouse. Workrave then stops counting my time as work time, and starts its rest timer. If my phone call is shorter than 5mn, then Workrave will resume its timer where it stopped it. Meaning that my time on the phone is not counted as work time, and so my break time is pushed a few minutes later than it should be. Even worse, if my phone call is longer than 5mn, then Workrave count it as a complete rest break, and when I'll resume working, it will restart its timer completly. I'm looking for either a way to disable the natural breaks, or increase the 'inactivity time' from 5s to maybe ~1mn. Or maybe an other angle to look at the natural breaks that might work with the Pomodoro technique (forced 5mn breaks every 25mn). I'm using Ubuntu 11.10.

  Read the article

• Why can't I ping a PC on my home network?

  - by AngryHacker

  Whenever I try to ping another box on my home network, it pings the wrong ip address: C:\Users\Papa>ping macmini Pinging macmini.belkin [208.68.143.55] with 32 bytes of data: Reply from 208.68.143.55: bytes=32 time=50ms TTL=110 As you can see it always appends belkin to anything I try to ping. So I hit up ipconfig and belkin happens to be Connection-specific DNS Suffix: Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : belkin IPv4 Address. . . . . . . . . . . : 192.168.2.7 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.2.1 My setup is all DHCP, so I am not sure where belkin is coming from. I looked through all the networking stuff, as you can see below: Bottom line: how do I fix this?

  Read the article

• Linux on MacBook Air

  - by enduser

  I'm thinking of getting a MacBook Air. The answers to this post will help me make my decision. My questions and my understanding of current solutions are: How difficult is it to install a Linux-based OS (like Fedora or Ubuntu)? I've heard a little about rEFIt, but am not sure what to make of it. Is it completely necessary? Do I still need it if I don't plan to dual boot with Mac OS X? Also a dual-boot isn't necessary, I'd just like to run Fedora/Ubuntu by itself, but I'm curious to know if a dual boot is simple. Does everything 'just work'? In my current laptop I need to add a wireless driver (Broadcom card). I've heard Macs use Broadcom wireless cards. Will this be an issue? How about graphics/touchpad (& multitouch)/sound? I'm aware there are tutorials out there on how to install some older version of some os on your Mac, but my questions are a bit more general: Will it be easy to use (install and configure drivers for) recent Linux distributions with a new MacBook Air? Note: I don't mind extra configuration, but would like to know where it'll be necessary, because if it's too much of a hassle I'll look at other hardware.

  Read the article

• Internet compression proxy for low speed broadband?

  - by user23150

  I live in a rural location, using high-latency wireless off a local ISP's tower. My speed tests vary day to day, but I can get around 1Mb up/down. The problem is, I work with large files, uploading and downloading (HD videos, development software, etc.). It can be painful to wait sometimes. Plus I do some side contract game development, and it can be very difficult to playtest with other developers (200ms ping is a good day for me). Now, obviously it's not going to be easy to solve the latency problem without different wireless hardware. But speedwise, I am wondering if I can use some kind of compression technology on a proxy. For instance, my work computer has full access to a 26Mb down, 10Mb up connection, that is totally unused at night and the weekends. If I could run some kind of compression technology on our server, and use it as a proxy to route to my home computer, I could stand to gain some major speed. I realize that by bogging down a system with compression, I could potentially lose whatever speed gain I had. But the proxy server is a quad core xeon, and the receiving computer is a pretty decent i7 computer, so that shouldn't be a concern. I found http://toonel.net/ but it seems more geared toward very slow narrowband users, like dial-up. Plus, I would prefer to just be able to point my browser to a proxy server, rather then install software on my client machine. EDIT I thought about my question a little more, and realize I am going to need to install software on my client in order to decompress, and possible compress (for uploading). That's not a huge deal.

  Read the article

• Good support to multiple desktops AND multiple monitors in Linux (Ubuntu)?

  - by Somebody still uses you MS-DOS

  I'm starting to have A LOT of opened windows in my machine. Sometimes within a project, I have e-mail/task management/personal e-mail/twitter, and a lot of different opened applications/terminal in my Linux environment. Nowadays I have 4 worspaces: Corporate management (e-mail) and corporate messenger; Work (Documents, Requisites) Dev (Development, All gVim windows, terminal and Firefox for development) Personal (Personal stuff: personal e-mail, delicious, twitter and so on) Sometimes it would be interesting to have different workspaces to projects instead of this configuration I have nowadays that are classes of work (bad name, I know, but I think you got the idea). I'm starting to think about using two monitors: one with Corporate Management, Work and Personal. The second monitor is only the development state: each workspace here is about a project being worked on instead of groups of works like before. A workspace may be implementing different classes for example. My question is: I just want to change to a second monitor using the mouse. I want to still be able to change workspaces in the same monitor using keyboard shortcuts. The keyboard shortcuts wouldn't change monitors, just worskpaces on the same monitor. Does Linux (Ubuntu 10.04 Lucid Lynx) support this envisioned setup? If so, how?

  Read the article

• Is it possible to add a WiFi HotSpot to an already established LAN, keep the two separate, and not modify the primary router?

  - by user12844

  I have a set up where my Cisco ASA is sitting in one facility, providing access to the Internet for two buildings. The two buildings are geographically separated by a Wireless Bridge spanning about 10 miles. All computers and equipment inside the LAN are on the same subnet (its pretty small) and we have WiFi AP's in both locations providing Wired and Wireless access to the LAN. Given all the BYOD (Ipods, and SmartPhones etc...) coming into the office as well as Visiting reps etc... we would like to also provide a non-secure, device independent (the devices cannot see or communicate with each other), and LAN independent (the devices cannot see or use anything on the LAN) HotSpot that anyone could use for their Devices that gives them access to the Internet ONLY without needing a password. I get that this could be possible at the facility with my Cisco if I messed with it and created VLANs etc... but then I would need to get it across my Bridge as well and don't think that would be possible without serious reconfiguration of everything. Would really like some kind of magic drop in solution that can kind of piggy back on my LAN without really needing to do very many if any changes to the current set up.

  Read the article

• Why can't I connect to my home SSH (SFTP) server? What am I doing wrong?

  - by Rolo

  I am new to this topic of creating a SFTP server on one's computer. I would like to be able to access the folder on my Windows XP computer via SFTP from another computer or a phone. The following is what I have done so far: I have installed SSH Windows and everything is setup correctly because I can access it (the folder on my pc) via WinSCP. I however cannot access it from my phone. It doesn't connect. The phone can be on the same wireless network as the Windows XP computer, but I would prefer to be able to access this when not in the same network. Now, from what I have read and understood, the following is the information needed to connect: 1) Host Name: This would be my computer's ip address which I access by typing ipconfig in a cmd prompt (I access this easily on my computer because I simply put in localhost or 127.0.0.1) 2) Port Number: That would be port 22 (I have also added this to my router in the port forwarding section). 3) Username: This would be my Windows XP username. This however is my full name, including my middle initial followed by a period. I am wondering if this is maybe causing problems in accessing it from my phone, since the name has spaces and punctuation (the period). 4) Password: The password of my Windows XP computer Extra Info: When I say phone, I mean an Android phone and I am using an ftp / sftp app to access my pc via the phone's cellular network (I also tried the wireless, but that didn't work as well). I have tried more than one program. On one program it tells me Connection timed out and on another it tells me "timeout:socket is not established" Also, I know that I can use the site noip, but I prefer to connect this way first. Also, because I am new to this, I would like to look into what exactly noip is doing and if they would be seeing my files as they are transferred from phone to pc. Thanking you in advance for your help.

  Read the article

• Route all traffic of home network through VPN

  - by user436118

  I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: ==LAN== Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN ==WAN== Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

  Read the article

• Route all traffic of home network through VPN [migrated]

  - by user436118

  I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

  Read the article

• Implementing union of Set using basic java array

  - by lupindeterd

  Note: This is an assignment. Hi, Continuing with my Set implementation using Java basic array, I'm now struggling with the 3 to last function namely the union. import java.io.*; class Set { private int numberOfElements = 0; private String[] setElements = new String[5]; private int maxNumberOfElements = 5; // constructor for our Set class public Set(int numberOfE, int setE, int maxNumberOfE) { int numberOfElements = numberOfE; String[] setElements = new String[setE]; int maxNumberOfElements = maxNumberOfE; } // Helper method to shorten/remove element of array since we're using basic array instead of ArrayList or HashSet from collection interface :( static String[] removeAt(int k, String[] arr) { final int L = arr.length; String[] ret = new String[L - 1]; System.arraycopy(arr, 0, ret, 0, k); System.arraycopy(arr, k + 1, ret, k, L - k - 1); return ret; } int findElement(String element) { int retval = 0; for ( int i = 0; i < setElements.length; i++) { if ( setElements[i] != null && setElements[i].equals(element) ) { return retval = i; } retval = -1; } return retval; } void add(String newValue) { int elem = findElement(newValue); if( numberOfElements < maxNumberOfElements && elem == -1 ) { setElements[numberOfElements] = newValue; numberOfElements++; } } int getLength() { if ( setElements != null ) { return setElements.length; } else { return 0; } } String[] emptySet() { setElements = new String[0]; return setElements; } Boolean isFull() { Boolean True = new Boolean(true); Boolean False = new Boolean(false); if ( setElements.length == maxNumberOfElements ){ return True; } else { return False; } } Boolean isEmpty() { Boolean True = new Boolean(true); Boolean False = new Boolean(false); if ( setElements.length == 0 ) { return True; } else { return False; } } void remove(String newValue) { for ( int i = 0; i < setElements.length; i++) { if ( setElements[i].equals(newValue) ) { setElements = removeAt(i,setElements); } } } int isAMember(String element) { int retval = -1; for ( int i = 0; i < setElements.length; i++ ) { if (setElements[i] != null && setElements[i].equals(element)) { return retval = i; } } return retval; } void printSet() { for ( int i = 0; i < setElements.length; i++) { System.out.println("Member elements on index: "+ i +" " + setElements[i]); } } String[] getMember() { String[] tempArray = new String[setElements.length]; for ( int i = 0; i < setElements.length; i++) { if(setElements[i] != null) { tempArray[i] = setElements[i]; } } return tempArray; } Set union(Set x, Set y) { String[] newtemparray = new String[x.getLength]; newtemparray = x.getMember; return x; } } // This is the SetDemo class that will make use of our Set class class SetDemo { public static void main(String[] args) { //get input from keyboard BufferedReader keyboard; InputStreamReader reader; String temp = ""; reader = new InputStreamReader(System.in); keyboard = new BufferedReader(reader); try { System.out.println("Enter string element to be added" ); temp = keyboard.readLine( ); System.out.println("You entered " + temp ); } catch (IOException IOerr) { System.out.println("There was an error during input"); } /* ************************************************************************** * Test cases for our new created Set class. * ************************************************************************** */ Set setA = new Set(1,10,10); setA.add(temp); setA.add("b"); setA.add("b"); setA.add("hello"); setA.add("world"); setA.add("six"); setA.add("seven"); setA.add("b"); int size = setA.getLength(); System.out.println("Set size is: " + size ); Boolean isempty = setA.isEmpty(); System.out.println("Set is empty? " + isempty ); int ismember = setA.isAMember("sixb"); System.out.println("Element six is member of setA? " + ismember ); Boolean output = setA.isFull(); System.out.println("Set is full? " + output ); setA.printSet(); int index = setA.findElement("world"); System.out.println("Element b located on index: " + index ); setA.remove("b"); setA.emptySet(); int resize = setA.getLength(); System.out.println("Set size is: " + resize ); setA.printSet(); Set setB = new Set(0,10,10); Set SetA = setA.union(setB,setA); } } Ok the method in question will be the implementation of union. As such this: Set union(Set x, Set y) { String[] newtemparray = new String[x.getLength]; newtemparray = x.getMember; return x; } I got this error: symbol : variable getLength location: class Set String[] newtemparray = new String[x.getLength]; ^ d:\javaprojects\Set.java:122: cannot find symbol symbol : variable getMember location: class Set newtemparray = x.getMember; ^ 2 errors My approach for union would be: *) create temporary array of string with size of the object x length. *) store object x members to temporary array by looping the object and calling the getMember *) loop object y members and check if element exist against temporary array. *) discard if it exist/add if it is not there *) return obj x with the union array. thanks, lupin

  Read the article

• Java constructor and modify the object properties at runtime

  - by lupin

  Note: This is an assignment Hi, I have the following class/constructor. import java.io.*; class Set { public int numberOfElements = 0; public String[] setElements = new String[5]; public int maxNumberOfElements = 5; // constructor for our Set class public Set(int numberOfE, int setE, int maxNumberOfE) { int numberOfElements = numberOfE; String[] setElements = new String[setE]; int maxNumberOfElements = maxNumberOfE; } // Helper method to shorten/remove element of array since we're using basic array instead of ArrayList or HashSet from collection interface :( static String[] removeAt(int k, String[] arr) { final int L = arr.length; String[] ret = new String[L - 1]; System.arraycopy(arr, 0, ret, 0, k); System.arraycopy(arr, k + 1, ret, k, L - k - 1); return ret; } int findElement(String element) { int retval = 0; for ( int i = 0; i < setElements.length; i++) { if ( setElements[i] != null && setElements[i].equals(element) ) { return retval = i; } retval = -1; } return retval; } void add(String newValue) { int elem = findElement(newValue); if( numberOfElements < maxNumberOfElements && elem == -1 ) { setElements[numberOfElements] = newValue; numberOfElements++; } } int getLength() { if ( setElements != null ) { return setElements.length; } else { return 0; } } String[] emptySet() { setElements = new String[0]; return setElements; } Boolean isFull() { Boolean True = new Boolean(true); Boolean False = new Boolean(false); if ( setElements.length == maxNumberOfElements ){ return True; } else { return False; } } Boolean isEmpty() { Boolean True = new Boolean(true); Boolean False = new Boolean(false); if ( setElements.length == 0 ) { return True; } else { return False; } } void remove(String newValue) { for ( int i = 0; i < setElements.length; i++) { if ( setElements[i].equals(newValue) ) { setElements = removeAt(i,setElements); } } } int isAMember(String element) { int retval = -1; for ( int i = 0; i < setElements.length; i++ ) { if (setElements[i] != null && setElements[i].equals(element)) { return retval = i; } } return retval; } void printSet() { for ( int i = 0; i < setElements.length; i++) { System.out.println("Member elements on index: "+ i +" " + setElements[i]); } } String[] getMember() { String[] tempArray = new String[setElements.length]; for ( int i = 0; i < setElements.length; i++) { if(setElements[i] != null) { tempArray[i] = setElements[i]; } } return tempArray; } Set union(Set x, Set y) { String[] newXtemparray = new String[x.getLength()]; String[] newYtemparray = new String[y.getLength()]; Set temp = new Set(1,20,20); newXtemparray = x.getMember(); newYtemparray = x.getMember(); for(int i = 0; i < newXtemparray.length; i++) { temp.add(newYtemparray[i]); } for(int j = 0; j < newYtemparray.length; j++) { temp.add(newYtemparray[j]); } return temp; } } // This is the SetDemo class that will make use of our Set class class SetDemo { public static void main(String[] args) { //get input from keyboard BufferedReader keyboard; InputStreamReader reader; String temp = ""; reader = new InputStreamReader(System.in); keyboard = new BufferedReader(reader); try { System.out.println("Enter string element to be added" ); temp = keyboard.readLine( ); System.out.println("You entered " + temp ); } catch (IOException IOerr) { System.out.println("There was an error during input"); } /* ************************************************************************** * Test cases for our new created Set class. * ************************************************************************** */ Set setA = new Set(1,10,10); setA.add(temp); setA.add("b"); setA.add("b"); setA.add("hello"); setA.add("world"); setA.add("six"); setA.add("seven"); setA.add("b"); int size = setA.getLength(); System.out.println("Set size is: " + size ); Boolean isempty = setA.isEmpty(); System.out.println("Set is empty? " + isempty ); int ismember = setA.isAMember("sixb"); System.out.println("Element six is member of setA? " + ismember ); Boolean output = setA.isFull(); System.out.println("Set is full? " + output ); setA.printSet(); int index = setA.findElement("world"); System.out.println("Element b located on index: " + index ); setA.remove("b"); setA.emptySet(); int resize = setA.getLength(); System.out.println("Set size is: " + resize ); setA.printSet(); Set setB = new Set(0,10,10); Set SetA = setA.union(setB,setA); SetA.printSet(); } } I have two question here, why I when I change the class property declaration to: class Set { public int numberOfElements; public String[] setElements; public int maxNumberOfElements; // constructor for our Set class public Set(int numberOfE, int setE, int maxNumberOfE) { int numberOfElements = numberOfE; String[] setElements = new String[setE]; int maxNumberOfElements = maxNumberOfE; } I got this error: \ javaprojects>java SetDemo Enter string element to be added a You entered a Exception in thread "main" java.lang.NullPointerException at Set.findElement(Set.java:30) at Set.add(Set.java:43) at SetDemo.main(Set.java:169) Second, on the union method, why the result of SetA.printSet still printing null, isn't it getting back the return value from union method? Thanks in advance for any explaination. lupin

  Read the article

• Returning new object, overwrite the existing one in Java

  - by lupin

  Note: This is an assignment. Hi, Ok I have this method that will create a supposedly union of 2 sets. i mport java.io.*; class Set { public int numberOfElements; public String[] setElements; public int maxNumberOfElements; // constructor for our Set class public Set(int numberOfE, int setE, int maxNumberOfE) { this.numberOfElements = numberOfE; this.setElements = new String[setE]; this.maxNumberOfElements = maxNumberOfE; } // Helper method to shorten/remove element of array since we're using basic array instead of ArrayList or HashSet from collection interface :( static String[] removeAt(int k, String[] arr) { final int L = arr.length; String[] ret = new String[L - 1]; System.arraycopy(arr, 0, ret, 0, k); System.arraycopy(arr, k + 1, ret, k, L - k - 1); return ret; } int findElement(String element) { int retval = 0; for ( int i = 0; i < setElements.length; i++) { if ( setElements[i] != null && setElements[i].equals(element) ) { return retval = i; } retval = -1; } return retval; } void add(String newValue) { int elem = findElement(newValue); if( numberOfElements < maxNumberOfElements && elem == -1 ) { setElements[numberOfElements] = newValue; numberOfElements++; } } int getLength() { if ( setElements != null ) { return setElements.length; } else { return 0; } } String[] emptySet() { setElements = new String[0]; return setElements; } Boolean isFull() { Boolean True = new Boolean(true); Boolean False = new Boolean(false); if ( setElements.length == maxNumberOfElements ){ return True; } else { return False; } } Boolean isEmpty() { Boolean True = new Boolean(true); Boolean False = new Boolean(false); if ( setElements.length == 0 ) { return True; } else { return False; } } void remove(String newValue) { for ( int i = 0; i < setElements.length; i++) { if ( setElements[i] != null && setElements[i].equals(newValue) ) { setElements = removeAt(i,setElements); } } } int isAMember(String element) { int retval = -1; for ( int i = 0; i < setElements.length; i++ ) { if (setElements[i] != null && setElements[i].equals(element)) { return retval = i; } } return retval; } void printSet() { for ( int i = 0; i < setElements.length; i++) { if (setElements[i] != null) { System.out.println("Member elements on index: "+ i +" " + setElements[i]); } } } String[] getMember() { String[] tempArray = new String[setElements.length]; for ( int i = 0; i < setElements.length; i++) { if(setElements[i] != null) { tempArray[i] = setElements[i]; } } return tempArray; } Set union(Set x, Set y) { String[] newXtemparray = new String[x.getLength()]; String[] newYtemparray = new String[y.getLength()]; int len = newYtemparray.length + newXtemparray.length; Set temp = new Set(0,len,len); newXtemparray = x.getMember(); newYtemparray = x.getMember(); for(int i = 0; i < newYtemparray.length; i++) { temp.add(newYtemparray[i]); } for(int j = 0; j < newXtemparray.length; j++) { temp.add(newXtemparray[j]); } return temp; } Set difference(Set x, Set y) { String[] newXtemparray = new String[x.getLength()]; String[] newYtemparray = new String[y.getLength()]; int len = newYtemparray.length + newXtemparray.length; Set temp = new Set(0,len,len); newXtemparray = x.getMember(); newYtemparray = x.getMember(); for(int i = 0; i < newXtemparray.length; i++) { temp.add(newYtemparray[i]); } for(int j = 0; j < newYtemparray.length; j++) { int retval = temp.findElement(newYtemparray[j]); if( retval != -1 ) { temp.remove(newYtemparray[j]); } } return temp; } } // This is the SetDemo class that will make use of our Set class class SetDemo { public static void main(String[] args) { //get input from keyboard BufferedReader keyboard; InputStreamReader reader; String temp = ""; reader = new InputStreamReader(System.in); keyboard = new BufferedReader(reader); try { System.out.println("Enter string element to be added" ); temp = keyboard.readLine( ); System.out.println("You entered " + temp ); } catch (IOException IOerr) { System.out.println("There was an error during input"); } /* ************************************************************************** * Test cases for our new created Set class. * ************************************************************************** */ Set setA = new Set(0,10,10); setA.add(temp); setA.add("b"); setA.add("b"); setA.add("hello"); setA.add("world"); setA.add("six"); setA.add("seven"); setA.add("b"); int size = setA.getLength(); System.out.println("Set size is: " + size ); Boolean isempty = setA.isEmpty(); System.out.println("Set is empty? " + isempty ); int ismember = setA.isAMember("sixb"); System.out.println("Element sixb is member of setA? " + ismember ); Boolean output = setA.isFull(); System.out.println("Set is full? " + output ); //setA.printSet(); int index = setA.findElement("world"); System.out.println("Element b located on index: " + index ); setA.remove("b"); //setA.emptySet(); int resize = setA.getLength(); System.out.println("Set size is: " + resize ); //setA.printSet(); Set setB = new Set(0,10,10); setB.add("b"); setB.add("z"); setB.add("x"); setB.add("y"); Set setC = setA.union(setB,setA); System.out.println("Elements of setA"); setA.printSet(); System.out.println("Union of setA and setB"); setC.printSet(); } } The union method works a sense that somehow I can call another method on it but it doesn't do the job, i supposedly would create and union of all elements of setA and setB but it only return element of setB. Sample output follows: java SetDemo Enter string element to be added hello You entered hello Set size is: 10 Set is empty? false Element sixb is member of setA? -1 Set is full? true Element b located on index: 2 Set size is: 9 Elements of setA Member elements on index: 0 hello Member elements on index: 1 world Member elements on index: 2 six Member elements on index: 3 seven Union of setA and setB Member elements on index: 0 b Member elements on index: 1 z Member elements on index: 2 x Member elements on index: 3 y thanks, lupin

  Read the article

• Storyboard apply to all labels

  - by ThitoO

  Hi everyone ! I whant to apply a little storyboard to a collection of labels in my window. My storyboard is like that : <Storyboard x:Key="Storyboard1" AutoReverse="True" RepeatBehavior="Forever"> <ColorAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="label" Storyboard.TargetProperty="(Label.Foreground).(SolidColorBrush.Color)"> <SplineColorKeyFrame KeyTime="00:00:00.1000000" Value="#FFFFFF"/> </ColorAnimationUsingKeyFrames> </Storyboard> I have a window composed of that : <Grid Background="#FF000000"> <Viewbox HorizontalAlignment="Center" VerticalAlignment="Center" Stretch="Uniform"> <UniformGrid x:Name="grid" Background="#FF000000" /> </Viewbox> </Grid> When I want to start my storyboard I do that : Storyboard.SetTarget( _stb, myLabel ); _stb.Begin(); where _std is my storyboard loaded by the window's resources. The animation works fine, but on all labels (not only the one I want). I tried to switch SetTarget by SetTargetName but labels are created into my window by the constructor and names can not be founded when I try "SetTargetName". Do you have any ideas ? Thanks :) ------------ Edit : We asked me to be more descriptive -------------------------------------------------------------------- Label are not created directly in the xaml, they are created by the constructor of the window : public SpellerWindow(IKeyboard keyboard, int colomnNumber, SolidColorBrush background, SolidColorBrush foreground ) { InitializeComponent(); grid.Columns = colomnNumber; int i = 0; foreach( IKey key in keyboard.Zones.Default.Keys ) { Label lb = new Label(); lb.Foreground = foreground; lb.Name = "label"+(i++).ToString(); lb.Content = key.ActualKeys[keyboard.CurrentMode].UpLabel; lb.HorizontalAlignment = HorizontalAlignment.Center; lb.VerticalAlignment = VerticalAlignment.Center; Viewbox box = new Viewbox(); box.Stretch = Stretch.Fill; box.Child = lb; box.Tag = key; grid.Children.Add( box ); } } Animations are started by an event handler : void Highlighter_StartAnimation( object sender, HiEventArgs e ) { Storyboard stb; if( !_anims.TryGetValue( e.Step.Animation.Name, out stb ) ) { stb = (Storyboard)_window.FindResource( e.Step.Animation.Name ); _anims.Add( e.Step.Animation.Name, stb ); } DoAnimations( _zones[e.Step.Zone], stb ); } Finally, animations are started by DoAnimations : void DoAnimations( List<Label> labels, Storyboard stb ) { foreach( Label lb in labels ) { Storyboard.SetTarget( stb, lb ); stb.Begin(); } } I want to highlight a collection of labels, but all labels are flashing. I don't know why, but I try to create a label into the Xaml directly, and set a Storyboard.TargetName (bound to the name of the label) in the Xaml of the storyboard. And it's working ... Now you know everything. Thanks for you help :)

  Read the article

• All downloads being interrupted

  - by Jake

  System: Windows 7 Professional 64bit. 8GB RAM, Intel i5-2400 CPU, +300GB free on the hard drive. AVG Internet Security 2012 (enabled & disabled, with firewall enabled and disabled - no effect for either). This computer is less than a year old. Network: This problem is occurring on a single computer on a network with multiple computers. The router is a Motorola Netopia 3347-02 (DSL Modem/Wireless Router combined). The computer is plugged in directly to the modem, other computers are using the wireless successfully. The router has been reset. The only thing odd about the connection between the router and computer is that it is configured to allow RDP through, so it is assigned a static IP by the router and port forwarding is enabled for port 3389. Also, though I doubt it matters, a second wireless router is active behind this router providing a second network that some computers in the area use without issues. Details: All downloads initiated on this specific computer eventually fail, this includes streaming from youtube, specialized downloads (itunes), downloads from websites, FTP downloads, etc. Failure occurs with all browsers, but in chrome this is the process it takes: 1) Download begins normally, 2) At some point between (observed) 7MBs and 229MBs the download stops progressing (at this point, if watching chrome's task manager, you can see the network activity for the downloading tab drop to 0kps), 3) for some time the download sits there still attempting to complete, but will eventually display "123,049,871/0 B, Interrupted" (where the number is whatever it actually got to). The file I am using to test this is a very large .zip file located on a server I control, but the problem seems to occur on any site. The amount downloaded is completely random, and seems to be more time-based than anything (if I start a download immediately after the last one fails, it tends to get further than the last one). Small files can get through for this reason, though they can fail as well. In a test where I simultaneously downloaded the same file via HTTP (chrome) and FTP (windows explorer), both downloads failed at the same instant, though explorer displayed "Connection timed out" several minutes before chrome finally showed the download as interrupted. Other things I have tried based on advice given to people with similar/identical problems: Setting my MTU to 1492 (as described here: http://blog.thecompwiz.com/2011/08/networking-issues.html) Disabling write caching to the hard drive storing the download on an external device successfully transmitted +1GB file from one computer on the same network to this computer disabling indexing in the folder the download was being stored in disabling all security software checked to make sure all drivers were up to date read about 50 accounts with nearly exact descriptions of what I'm experiencing, none of which had a solution given Running Processes: Image Name PID Session Name Session# Mem Usage ========================= ======== ================ =========== ============ System Idle Process 0 Services 0 24 K System 4 Services 0 104,836 K smss.exe 332 Services 0 1,276 K csrss.exe 764 Services 0 5,060 K wininit.exe 820 Services 0 4,748 K csrss.exe 844 Console 1 23,764 K services.exe 876 Services 0 11,856 K lsass.exe 892 Services 0 14,420 K lsm.exe 900 Services 0 7,820 K winlogon.exe 944 Console 1 7,716 K svchost.exe 428 Services 0 12,744 K svchost.exe 796 Services 0 12,240 K svchost.exe 1036 Services 0 22,372 K svchost.exe 1084 Services 0 174,132 K svchost.exe 1112 Services 0 56,144 K svchost.exe 1288 Services 0 18,640 K svchost.exe 1404 Services 0 29,616 K spoolsv.exe 1576 Services 0 25,924 K svchost.exe 1616 Services 0 12,788 K AppleMobileDeviceService. 1728 Services 0 9,796 K avgwdsvc.exe 1820 Services 0 8,268 K mDNSResponder.exe 1844 Services 0 5,832 K w3dbsmgr.exe 1108 Services 0 43,760 K QBCFMonitorService.exe 1336 Services 0 16,408 K svchost.exe 2404 Services 0 28,240 K taskhost.exe 3020 Console 1 12,372 K dwm.exe 2280 Console 1 5,968 K explorer.exe 2964 Console 1 152,476 K WUDFHost.exe 3316 Services 0 6,740 K svchost.exe 3408 Services 0 5,556 K RAVCpl64.exe 3684 Console 1 13,864 K igfxtray.exe 3700 Console 1 7,804 K hkcmd.exe 3772 Console 1 7,868 K igfxpers.exe 3788 Console 1 10,940 K sidebar.exe 3836 Console 1 84,400 K chrome.exe 3964 Console 1 19,640 K pptd40nt.exe 4068 Console 1 5,156 K acrotray.exe 3908 Console 1 14,676 K avgtray.exe 3872 Console 1 9,508 K jusched.exe 4076 Console 1 4,412 K iTunesHelper.exe 1532 Console 1 87,308 K SearchIndexer.exe 3492 Services 0 36,948 K iPodService.exe 4136 Services 0 7,944 K BrccMCtl.exe 4276 Console 1 18,132 K splwow64.exe 4380 Console 1 32,600 K qbupdate.exe 4836 Console 1 24,236 K svchost.exe 4288 Services 0 20,700 K wmpnetwk.exe 3112 Services 0 9,516 K FNPLicensingService.exe 5248 Services 0 5,852 K QBW32.EXE 5508 Console 1 127,068 K QBDBMgrN.exe 5600 Services 0 42,252 K EXCEL.EXE 2512 Console 1 99,100 K LMS.exe 3188 Services 0 5,616 K UNS.exe 1600 Services 0 7,308 K axlbridge.exe 5260 Console 1 5,132 K chrome.exe 5888 Console 1 200,336 K chrome.exe 3536 Console 1 26,076 K chrome.exe 1952 Console 1 20,168 K chrome.exe 4596 Console 1 24,696 K chrome.exe 4292 Console 1 48,096 K chrome.exe 2796 Console 1 23,520 K Acrobat.exe 1240 Console 1 87,252 K 123w.exe 4892 Console 1 22,728 K calc.exe 1700 Console 1 12,636 K chrome.exe 1328 Console 1 28,888 K chrome.exe 3696 Console 1 47,012 K rundll32.exe 6320 Console 1 7,104 K chrome.exe 4928 Console 1 44,248 K AVGIDSAgent.exe 260 Services 0 12,940 K avgfws.exe 6052 Services 0 26,912 K avgnsa.exe 5064 Services 0 2,496 K avgrsa.exe 3088 Services 0 2,200 K avgcsrva.exe 2596 Services 0 380 K avgcsrva.exe 6948 Services 0 408 K StikyNot.exe 452 Console 1 14,772 K chrome.exe 4580 Console 1 28,200 K chrome.exe 4016 Console 1 57,756 K svchost.exe 7140 Services 0 4,500 K chrome.exe 6264 Console 1 56,824 K chrome.exe 7008 Console 1 56,896 K chrome.exe 2224 Console 1 38,032 K taskhost.exe 612 Console 1 7,228 K chrome.exe 6000 Console 1 10,928 K chrome.exe 2568 Console 1 43,052 K chrome.exe 272 Console 1 75,988 K chrome.exe 7328 Console 1 53,240 K PaprPort.exe 7976 Console 1 137,152 K pplinks.exe 7500 Console 1 14,052 K ppscanmg.exe 5744 Console 1 18,996 K taskeng.exe 7388 Console 1 6,308 K SearchProtocolHost.exe 8024 Services 0 8,804 K SearchFilterHost.exe 7232 Services 0 7,848 K chrome.exe 8016 Console 1 37,440 K cmd.exe 7692 Console 1 3,096 K conhost.exe 7516 Console 1 5,872 K tasklist.exe 8160 Console 1 5,772 K WmiPrvSE.exe 7684 Services 0 6,400 K Any help with this would be greatly appreciated, I've been beating my head against a wall over this all day. This computer serves dual purpose as the main company document server and the Owner's work computer, it's fairly important it be fully functional and I cannot figure this out.

  Read the article

• Unable to SSH into EC2 instance on Fedora 17

  - by abhishek

  I did following steps But I am not able to SSH to it(Same steps work fine on Fedora 14 image). I am getting Permission denied (publickey,gssapi-keyex,gssapi-with-mic) I created new instance using fedora 17 amazon community image(ami-2ea50247). I copied my ssh keys under /home/usertest/.ssh/ after creating a usertest I have SELINUX=disabled here is Debug info: $ ssh -vvv ec2-54-243-101-41.compute-1.amazonaws.com ssh -vvv ec2-54-243-101-41.compute-1.amazonaws.com OpenSSH_5.2p1, OpenSSL 1.0.0b-fips 16 Nov 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ec2-54-243-101-41.compute-1.amazonaws.com [54.243.101.41] port 22. debug1: Connection established. debug1: identity file /home/usertest/.ssh/identity type -1 debug1: identity file /home/usertest/.ssh/id_rsa type -1 debug3: Not a RSA1 key file /home/usertest/.ssh/id_dsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'Proc-Type:' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'DEK-Info:' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/usertest/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9 debug1: match: OpenSSH_5.9 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 131/256 debug2: bits set: 506/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: filename /home/usertest/.ssh/known_hosts debug3: check_host_in_hostfile: match line 17 debug3: check_host_in_hostfile: filename /home/usertest/.ssh/known_hosts debug3: check_host_in_hostfile: match line 17 debug1: Host 'ec2-54-243-101-41.compute-1.amazonaws.com' is known and matches the RSA host key. debug1: Found key in /home/usertest/.ssh/known_hosts:17 debug2: bits set: 500/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/usertest/.ssh/identity ((nil)) debug2: key: /home/usertest/.ssh/id_rsa ((nil)) debug2: key: /home/usertest/.ssh/id_dsa (0x7f904b5ae260) debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug3: start over, passed a different list publickey,gssapi-keyex,gssapi-with-mic debug3: preferred gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup gssapi-with-mic debug3: remaining preferred: publickey,keyboard-interactive,password debug3: authmethod_is_enabled gssapi-with-mic debug1: Next authentication method: gssapi-with-mic debug3: Trying to reverse map address 54.243.101.41. debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information debug2: we did not send a packet, disable method debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/usertest/.ssh/identity debug3: no such identity: /home/usertest/.ssh/identity debug1: Trying private key: /home/usertest/.ssh/id_rsa debug3: no such identity: /home/usertest/.ssh/id_rsa debug1: Offering public key: /home/usertest/.ssh/id_dsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug2: we did not send a packet, disable method debug1: No more authentication methods to try. Permission denied (publickey,gssapi-keyex,gssapi-with-mic).

  Read the article

• How to optimize this JSON/JQuery/Javascript function in IE7/IE8?

  - by melaos

  hi guys, i'm using this function to parse this json data but i find the function to be really slow in IE7 and slightly slow in IE8. basically the first listbox generate the main product list, and upon selection of the main list, it will populate the second list. this is my data: [{"ProductCategoryId":209,"ProductCategoryName":"X-Fi","ProductSubCategoryId":668,"ProductSubCategoryName":"External Solutions","ProductId":15913,"ProductName":"Creative Xmod","ProductServiceLifeId":1},{"ProductCategoryId":209,"ProductCategoryName":"X-Fi","ProductSubCategoryId":668,"ProductSubCategoryName":"External Solutions","ProductId":15913,"ProductName":"Creative Xmod","ProductServiceLifeId":1},{"ProductCategoryId":209,"ProductCategoryName":"X-Fi","ProductSubCategoryId":668,"ProductSubCategoryName":"External Solutions","ProductId":18094,"ProductName":"Sound Blaster Wireless Receiver","ProductServiceLifeId":1},{"ProductCategoryId":209,"ProductCategoryName":"X-Fi","ProductSubCategoryId":668,"ProductSubCategoryName":"External Solutions","ProductId":16185,"ProductName":"Xdock Wireless","ProductServiceLifeId":1},{"ProductCategoryId":209,"ProductCategoryName":"X-Fi","ProductSubCategoryId":668,"ProductSubCategoryName":"External Solutions","ProductId":16186,"ProductName":"Xmod Wireless","ProductServiceLifeId":1}] and these are the functions that i'm using: //Three Product Panes function function populateMainPane() { $.getJSON('/Home/ThreePaneProductData/', function(data) { products = data; alert(JSON.stringify(products)); var prodCategory = {}; for (i = 0; i < products.length; i++) { prodCategory[products[i].ProductCategoryId] = products[i].ProductCategoryName; } //end for //take only unique product category to be used var id = 0; for (id in prodCategory) { if (prodCategory.hasOwnProperty(id)) { $(".LBox1").append("<option value='" + id + "'>" + prodCategory[id] + "</option>"); //alert(prodCategory[id]); } } var url = document.location.href; var parms = url.substring(url.indexOf("?") + 1).split("&"); for (var i = 0; i < parms.length; i++) { var parm = parms[i].split("="); if (parm[0].toLowerCase() == "pid") { $(".PanelProductReg").show(); var nProductIds = parm[1].split(","); for (var k = 0; k < nProductIds.length; k++) { var nProductId = parseInt(nProductIds[k], 10); for (var j = 0; j < products.length; j++) { if (nProductId == parseInt(products[j].ProductId, 10)) { addProductRow(nProductId, products[j].ProductName); j = products.length; } } //end for } } } }); } //end function function populateSubCategoryPane() { var subCategory = {}; for (var i = 0; i < products.length; i++) { if (products[i].ProductCategoryId == $('.LBox1').val()) subCategory[products[i].ProductSubCategoryId] = products[i].ProductSubCategoryName; } //end for //clear off the list box first $(".LBox2").html(""); var id = 0; for (id in subCategory) { if (subCategory.hasOwnProperty(id)) { $(".LBox2").append("<option value='" + id + "'>" + subCategory[id] + "</option>"); //alert(prodCategory[id]); } } } //end function is there anything i can do to optimize this or is this a known browser issue?

  Read the article

• Productivity Tips

  - by Brian T. Jackett

  A few months ago during my first end of year review at Microsoft I was doing an assessment of my year.  One of my personal goals to come out of this reflection was to improve my personal productivity.  While I hear many people say “I wish I had more hours in the day so that I could get more done” I feel like that is the wrong approach.  There is an inherent assumption that you are being productive with your time that you already have and thus more time would allow you to be as productive given more time.    Instead of wishing I could add more hours to the day I’ve begun adopting a number of processes or behavior changes in my personal life to make better use of my time with the goal of improving productivity.  The areas of focus are as follows: Focus Processes Tools Personal health Email Note: A number of these topics have spawned from reading Scott Hanselman’s blog posts on productivity, reading of David Allen’s book Getting Things Done, and discussions with friends and coworkers who had great insights into this topic.   Focus Pre-reading / viewing: Overcome your work addiction Millennials paralyzed by choice Its Not What You Read Its What You Ignore (Scott Hanselman video)    I highly recommend Scott Hanselman’s video above and this post before continuing with this article.  It is well worth the 40+ mins price of admission for the video and couple minutes for article.  One key takeaway for me was listing out my activities in an average week and realizing which ones held little or no value to me.  We all have a finite amount of time to work each day.  Do you know how much time and effort you spend on various aspects of your life (family, friends, religion, work, personal happiness, etc.)?  Do your actions and commitments reflect your priorities?    The biggest time consumers with little value for me were time spent on social media services (Twitter and Facebook), playing an MMO video game, and watching TV.  I still check up on Facebook, Twitter, Microsoft internal chat forums, and other services to keep contact with others but I’ve reduced that time significantly.  As for TV I’ve cut the cord and no longer subscribe to cable TV.  Instead I use Netflix, RedBox, and over the air channels but again with reduced time consumption.  With the time I’ve freed up I’m back to working out 2-3 times a week and reading 4 nights a week (both of which I had been neglecting previously).  I’ll mention a few tools for helping measure your time in the Tools section.   Processes    Do not multi-task.  I’ll say it again.  Do not multi-task.  There is no such thing as multi tasking.  The human brain is optimized to work on one thing at a time.  When you are “multi-tasking” you are really doing 2 or more things at less than 100%, usually by a wide margin.  I take pride in my work and when I’m doing something less than 100% the results typically degrade rapidly.    Now there are some ways of bending the rules of physics for this one.  There is the notion of getting a double amount of work done in the same timeframe.  Some examples would be listening to podcasts / watching a movie while working out, using a treadmill as your work desk, or reading while in the bathroom.    Personally I’ve found good results in combining one task that does not require focus (making dinner, playing certain video games, working out) and one task that does (watching a movie, listening to podcasts).  I believe this is related to me being a visual and kinesthetic (using my hands or actually doing it) learner.  I’m terrible with auditory learning.  My fiance and I joke that sometimes we talk and talk to each other but never really hear each other.   Goals / Tasks    Goals can give us direction in life and a sense of accomplishment when we complete them.  Goals can also overwhelm us and give us a sense of failure when we don’t complete them.  I propose that you shift your perspective and not dwell on all of the things that you haven’t gotten done, but focus instead on regularly setting measureable goals that are within reason of accomplishing.    At the end of each time frame have a retrospective to review your progress.  Do not feel guilty about what you did not accomplish.  Feel proud of what you did accomplish and readjust your goals for the next time frame to more attainable goals.  Here is a sample schedule I’ve seen proposed by some.  I have not consistently set goals for each timeframe, but I do typically set 3 small goals a day (this blog post is #2 for today). Each day set 3 small goals Each week set 3 medium goals Each month set 1 large goal Each year set 2 very large goals   Tools    Tools are an extension of our human body.  They help us extend beyond what we can physically and mentally do.  Below are some tools I use almost daily or have found useful as of late. Disclaimer: I am not getting endorsed to promote any of these products.  I just happen to like them and find them useful. Instapaper – Save internet links for reading later.  There are many tools like this but I’ve found this to be a great one.  There is even a “read it later” JavaScript button you can add to your browser so when you navigate to a site it will then add this to your list. Stacks for Instapaper – A Windows Phone 7 app for reading my Instapaper articles on the go.  It does require a subscription to Instapaper (nominal $3 every three months) but is easily worth the cost.  Alternatively you can set up your Kindle to sync with Instapaper easily but I haven’t done so. SlapDash Podcast – Apps for Windows Phone and  Windows 8 (possibly other platforms) to sync podcast viewing / listening across multiple devices.  Now that I have my Surface RT device (which I love) this is making my consumption easier to manage. Feed Reader – Simple Windows 8 app for quickly catching up on my RSS feeds.  I used to have hundreds of unread items all the time.  Now I’m down to 20-50 regularly and it is much easier and faster to consume on my Surface RT.  There is also a free version (which I use) and I can’t see much different between the free and paid versions currently. Rescue Time – Have you ever wondered how much time you’ve spent on websites vs. email vs. “doing work”?  This service tracks your computer actions and then lets you report on them.  This can help you quantitatively identify areas where your actions are not in line with your priorities. PowerShell – Windows automation tool.  It is now built into every client and server OS.  This tool has saved me days (and I mean the full 24 hrs worth) of time and effort in the past year alone.  If you haven’t started learning PowerShell and you administrating any Windows OS or server product you need to start today. Various blogging tools – I wrote a post a couple years ago called How I Blog about my blogging process and tools used.  Almost all of it still applies today.   Personal Health    Some of these may be common sense or debatable, but I’ve found them to help prioritize my daily activities. Get plenty of sleep on a regular basis.  Sacrificing sleep too many nights a week negatively impacts your cognition, attitude, and overall health. Exercise at least three days.  Exercise could be lifting weights, taking the stairs up multiple flights of stairs, walking for 20 mins, or a number of other "non-traditional” activities.  I find that regular exercise helps with sleep and improves my overall attitude. Eat a well balanced diet.  Too much sugar, caffeine, junk food, etc. are not good for your body.  This is not a matter of losing weight but taking care of your body and helping you perform at your peak potential.   Email    Email can be one of the biggest time consumers (i.e. waster) if you aren’t careful. Time box your email usage.  Set a meeting invite for yourself if necessary to limit how much time you spend checking email. Use rules to prioritize your email.  Email from external customers, my manager, or include me directly on the To line go into my inbox.  Everything else goes a level down and I have 30+ rules to further sort it, mostly distribution lists. Use keyboard shortcuts (when available).  I use Outlook for my primary email and am constantly hitting Alt + S to send, Ctrl + 1 for my inbox, Ctrl + 2 for my calendar, Space / Tab / Shift + Tab to mark items as read, and a number of other useful commands.  Learn them and you’ll see your speed getting through emails increase. Keep emails short.  No one Few people like reading through long emails.  The first line should state exactly why you are sending the email followed by a 3-4 lines to support it.  Anything longer might be better suited as a phone call or in person discussion.   Conclusion    In this post I walked through various tips and tricks I’ve found for improving personal productivity.  It is a mix of re-focusing on the things that matter, using tools to assist in your efforts, and cutting out actions that are not aligned with your priorities.  I originally had a whole section on keyboard shortcuts, but with my recent purchase of the Surface RT I’m finding that touch gestures have replaced numerous keyboard commands that I used to need.  I see a big future in touch enabled devices.  Hopefully some of these tips help you out.  If you have any tools, tips, or ideas you would like to share feel free to add in the comments section.         -Frog Out   Links Scott Hanselman Productivity posts http://www.hanselman.com/blog/CategoryView.aspx?category=Productivity Overcome your work addiction http://blogs.hbr.org/hbsfaculty/2012/05/overcome-your-work-addiction.html?awid=5512355740280659420-3271   Millennials paralyzed by choice http://priyaparker.com/blog/millennials-paralyzed-by-choice   Its Not What You Read Its What You Ignore (video) http://www.hanselman.com/blog/ItsNotWhatYouReadItsWhatYouIgnoreVideoOfScottHanselmansPersonalProductivityTips.aspx   Cutting the cord – Jeff Blankenburg http://www.jeffblankenburg.com/2011/04/06/cutting-the-cord/   Building a sitting standing desk – Eric Harlan http://www.ericharlan.com/Everything_Else/building-a-sitting-standing-desk-a229.html   Instapaper http://www.instapaper.com/u   Stacks for Instapaper http://www.stacksforinstapaper.com/   Slapdash Podcast Windows Phone -  http://www.windowsphone.com/en-us/store/app/slapdash-podcasts/90e8b121-080b-e011-9264-00237de2db9e Windows 8 - http://apps.microsoft.com/webpdp/en-us/app/slapdash-podcasts/0c62e66a-f2e4-4403-af88-3430a821741e/m/ROW   Feed Reader http://apps.microsoft.com/webpdp/en-us/app/feed-reader/d03199c9-8e08-469a-bda1-7963099840cc/m/ROW   Rescue Time http://www.rescuetime.com/   PowerShell Script Center http://technet.microsoft.com/en-us/scriptcenter/bb410849.aspx

  Read the article

• "Translator by Moth"

  - by Daniel Moth

  This article serves as the manual for the free Windows Phone 7 app called "Translator by Moth". The app is available from the following link (browse the link on your Window Phone 7 phone, or from your PC with zune software installed): http://social.zune.net/redirect?type=phoneApp&id=bcd09f8e-8211-e011-9264-00237de2db9e   Startup At startup the app makes a connection to the bing Microsoft Translator service to retrieve the available languages, and also which languages offer playback support (two network calls total). It populates with the results the two list pickers ("from" and "to") on the "current" page. If for whatever reason the network call fails, you are informed via a message box, and the app keeps trying to make a connection every few seconds. When it eventually succeeds, the language pickers on the "current" page get updated. Until it succeeds, the language pickers remain blank and hence no new translations are possible. As you can guess, if the Microsoft Translation service add more languages for textual translation (or enables more for playback) the app will automatically pick those up. "current" page The "current" page is the main page of the app with language pickers, translation boxes and the application bar. Language list pickers The "current" page allows you to pick the "from" and "to" languages, which are populated at start time. Until these language get populated with the results of the network calls, they remain empty and disabled. When enabled, tapping on either of them brings up on a full screen popup the list of languages to pick from, formatted as English Name followed by Native Name (when the latter is known). The "to" list, in addition to the language names, indicates which languages have playback support via a * in front of the language name. When making a selection for the "to" language, and if there is text entered for translation, a translation is performed (so there is no need to tap on the "translate" application bar button). Note that both language choices are remembered between different launches of the application.   text for translation The textbox where you enter the translation is always enabled. When there is nothing entered in it, it displays (centered and in italics) text prompting you to enter some text for translation. When you tap on it, the prompt text disappears and it becomes truly empty, waiting for input via the keyboard that automatically pops up. The text you type is left aligned and not in italic font. The keyboard shows suggestions of text as you type. The keyboard can be dismissed either by tapping somewhere else on the screen, or via tapping on the Windows Phone hardware "back" button, or via taping on the "enter" key. In the latter case (tapping on the "enter" key), if there was text entered and if the "from" language is not blank, a translation is performed (so there is no need to tap on the "translate" application bar button). The last text entered is remembered between application launches. translated text The translated text appears below the "to" language (left aligned in normal font). Until a translation is performed, there is a message in that space informing you of what to expect (translation appearing there). When the "current" page is cleared via the "clear" application bar button, the translated text reverts back to the message. Note a subtle point: when a translation has been performed and subsequently you change the "from" language or the text for translation, the translated text remains in place but is now in italic font (attempting to indicate that it may be out of date). In any case, this text is not remembered between application launches. application bar buttons and menus There are 4 application bar buttons and 4 application bar menus. "translate" button takes the text for translation and translates it to the translated text, via a single network call to the bing Microsoft Translator service. If the network call fails, the user is informed via a message box. The button is disabled when there is no "from" language available or when there is not text for translation entered. "play" button takes the translated text and plays it out loud in a native speaker's voice (of the "to" language), via a single network call to the bing Microsoft Translator service. If the network call fails, the user is informed via a message box. The button is disabled when there is no "to" language available or when there is no translated text available. "clear" button clears any user text entered in the text for translation box and any translation present in the translated text box. If both of those are already empty, the button is disabled. It also stops any playback if there is one in flight. "save" button saves the entire translation ("from" language, "to" language, text for translation, and translated text) to the bottom of the "saved" page (described later), and simultaneously switches to the "saved" page. The button is disabled if there is no translation or the translation is not up to date (i.e. one of the elements have been changed). "swap to and from languages" menu swaps around the "from" and "to" languages. It also takes the translated text and inserts it in the text for translation area. The translated text area becomes blank. The menu is disabled when there is no "from" and "to" language info. "send translation via sms" menu takes the translated text and creates an SMS message containing it. The menu is disabled when there is no translation present. "send translation via email" menu takes the translated text and creates an email message containing it (after you choose which email account you want to use). The menu is disabled when there is no translation present. "about" menu shows the "about" page described later. "saved" page The "saved" page is initially empty. You can add translations to it by translating text on the "current" page and then tapping the application bar "save" button. Once a translation appears in the list, you can read it all offline (both the "from" and "to" text). Thus, you can create your own phrasebook list, which is remembered between application launches (it is stored on your device). To listen to the translation, simply tap on it – this is only available for languages that support playback, as indicated by the * in front of them. The sound is retrieved via a single network call to the bing Microsoft Translator service (if it fails an appropriate message is displayed in a message box). Tap and hold on a saved translation to bring up a context menu with 4 items: "move to top" menu moves the selected item to the top of the saved list (and scrolls there so it is still in view) "copy to current" menu takes the "from" and "to" information (language and text), and populates the "current" page with it (switching at the same time to the current page). This allows you to make tweaks to the translation (text or languages) and potentially save it back as a new item. Note that the action makes a copy of the translation, so you are not actually editing the existing saved translation (which remains intact). "delete" menu deletes the selected translation. "delete all" menu deletes all saved translations from the "saved" page – there is no way to get that info back other than re-entering it, so be cautious. Note: Once playback of a translation has been retrieved via a network call, Windows Phone 7 caches the results. What this means is that as long as you play a saved translation once, it is likely that it will be available to you for some time, even when there is no network connection.   "about" page The "about" page provides some textual information (that you can view in the screenshot) including a link to the creator's blog (that you can follow on your Windows Phone 7 device). Use that link to discover the email for any feedback. Other UI design info As you can see in the screenshots above, "Translator by Moth" has been designed from scratch for Windows Phone 7, using the nice pivot control and application bar. It also supports both portrait and landscape orientations, and looks equally good in both the light and the dark theme. Other than the default black and white colors, it uses the user's chosen accent color (which is blue in the screenshot examples above). Feedback and support Please report (via the email on the blog) any bugs you encounter or opportunities for performance improvements and they will be fixed in the next update. Suggestions for new features will be considered, but given that the app is FREE, no promises are made. If you like the app, don't forget to rate "Translator by Moth" on the marketplace. Comments about this post welcome at the original blog.

  Read the article

• NEC uPD720200 USB 3.0 not working on Ubuntu 12.04

  - by Jagged

  I've recently installed Ubuntu 12.04 64-bit on a HP Envy 15 1104tx. Most stuff appears to be working fine with the exception of the two USB3 ports (USB2 port works fine). I've read a lot of articles but so far have not been able to find a solution. I've tried adding 'pci=nomsi' to '/etc/default/grub' but this made no difference. Some articles suggest booting into Windows and upgrading the firmware on the uPD720200. Any body had any experience of this? Is there a way I can checked the firmware version of the NEC uPD720200 in Linux to see if there is an update available? Any help appreciated. uname -a: Linux HP-ENVY-15-1104tx 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lshw: hp-envy-15-1104tx description: Notebook product: HP ENVY 15 Notebook PC (WF591PA#ABG) vendor: Hewlett-Packard version: 0492110000241910001420000 serial: CNF0301C79 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=notebook family=103C_5335KV sku=WF591PA#ABG uuid=434E4630-3330-3143-3739-60EB6906688F *-core description: Motherboard product: 1522 vendor: Hewlett-Packard physical id: 0 version: 36.35 serial: CNF0301C79 slot: Base Board Chassis Location *-firmware description: BIOS vendor: Hewlett-Packard physical id: 0 version: F.2B date: 10/12/2010 size: 1MiB capacity: 1472KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 13 slot: System board or motherboard size: 16GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 0 serial: E13C4316 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 1 serial: E03C3E16 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 2 serial: 672279CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 3 serial: 652286CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-cpu description: CPU product: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz vendor: Intel Corp. physical id: 1d bus info: cpu@0 version: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz slot: CPU size: 1199MHz capacity: 1199MHz width: 64 bits clock: 1066MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=4 threads=8 *-cache:0 description: L3 cache physical id: 1e slot: L3 Cache size: 8MiB capacity: 8MiB capabilities: synchronous internal write-through unified *-cache:1 description: L2 cache physical id: 20 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L1 cache physical id: 21 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache description: L1 cache physical id: 1f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci:0 description: Host bridge product: Core Processor DMI vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 11 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Core Processor PCI Express Root Port 1 vendor: Intel Corporation physical id: 3 bus info: pci@0000:00:03.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:4000(size=4096) memory:d4100000-d41fffff ioport:c0000000(size=268435456) *-display description: VGA compatible controller product: Broadway PRO [Mobility Radeon HD 5800 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:58 memory:c0000000-cfffffff memory:d4100000-d411ffff ioport:4000(size=256) memory:d4140000-d415ffff *-multimedia description: Audio device product: Juniper HDMI Audio [Radeon HD 5700 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:56 memory:d4120000-d4123fff *-pci:1 description: PCI bridge product: Core Processor PCI Express Root Port 3 vendor: Intel Corporation physical id: 5 bus info: pci@0000:00:05.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d4000000-d40fffff *-usb description: USB controller product: uPD720200 USB 3.0 Host Controller vendor: NEC Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:16 memory:d4000000-d4001fff *-generic:0 UNCLAIMED description: System peripheral product: Core Processor System Management Registers vendor: Intel Corporation physical id: 8 bus info: pci@0000:00:08.0 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:1 UNCLAIMED description: System peripheral product: Core Processor Semaphore and Scratchpad Registers vendor: Intel Corporation physical id: 8.1 bus info: pci@0000:00:08.1 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:2 UNCLAIMED description: System peripheral product: Core Processor System Control and Status Registers vendor: Intel Corporation physical id: 8.2 bus info: pci@0000:00:08.2 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:3 UNCLAIMED description: System peripheral product: Core Processor Miscellaneous Registers vendor: Intel Corporation physical id: 8.3 bus info: pci@0000:00:08.3 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:4 UNCLAIMED description: System peripheral product: Core Processor QPI Link vendor: Intel Corporation physical id: 10 bus info: pci@0000:00:10.0 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:5 UNCLAIMED description: System peripheral product: Core Processor QPI Routing and Protocol Registers vendor: Intel Corporation physical id: 10.1 bus info: pci@0000:00:10.1 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-multimedia description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:55 memory:d4200000-d4203fff *-pci:2 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 ioport:3000(size=4096) memory:d3000000-d3ffffff ioport:d0000000(size=16777216) *-network description: Wireless interface product: Centrino Advanced-N 6200 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 35 serial: 00:27:10:40:e4:68 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=9.221.4.1 build 25532 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:54 memory:d3000000-d3001fff *-pci:3 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:2000(size=4096) memory:d2000000-d2ffffff ioport:d1000000(size=16777216) *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c0 serial: 60:eb:69:06:68:8f size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=10.161.0.147 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:57 memory:d2000000-d203ffff ioport:2000(size=128) *-usb description: USB controller product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:20 memory:d4205800-d4205bff *-pci:4 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: a5 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: Mobile 5 Series Chipset LPC Interface Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: RAID bus controller product: 82801 Mobile SATA Controller [RAID mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:45 ioport:5048(size=8) ioport:5054(size=4) ioport:5040(size=8) ioport:5050(size=4) ioport:5020(size=32) memory:d4205000-d42057ff *-disk description: ATA Disk product: OCZ-VERTEX3 physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 2.15 serial: OCZ-0350P6H316X5KUQE size: 223GiB (240GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000592dd *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: e741f18c-cfc5-4bce-b1e7-f80e517a3a22 size: 207GiB capacity: 207GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-06-15 06:49:27 filesystem=ext4 lastmountpoint=/ modified=2012-06-14 21:23:42 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered mounted=2012-07-10 16:18:20 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 15GiB capacity: 15GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 15GiB capabilities: nofs *-serial UNCLAIMED description: SMBus product: 5 Series/3400 Series Chipset SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d4205c00-d4205cff ioport:5000(size=32) *-pci:1 description: Host bridge product: Core Processor QuickPath Architecture Generic Non-Core Registers vendor: Intel Corporation physical id: 101 bus info: pci@0000:ff:00.0 version: 04 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Core Processor QuickPath Architecture System Address Decoder vendor: Intel Corporation physical id: 102 bus info: pci@0000:ff:00.1 version: 04 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Core Processor QPI Link 0 vendor: Intel Corporation physical id: 103 bus info: pci@0000:ff:02.0 version: 04 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Core Processor QPI Physical 0 vendor: Intel Corporation physical id: 104 bus info: pci@0000:ff:02.1 version: 04 width: 32 bits clock: 33MHz *-pci:5 description: Host bridge product: Core Processor Integrated Memory Controller vendor: Intel Corporation physical id: 105 bus info: pci@0000:ff:03.0 version: 04 width: 32 bits clock: 33MHz *-pci:6 description: Host bridge product: Core Processor Integrated Memory Controller Target Address Decoder vendor: Intel Corporation physical id: 106 bus info: pci@0000:ff:03.1 version: 04 width: 32 bits clock: 33MHz *-pci:7 description: Host bridge product: Core Processor Integrated Memory Controller Test Registers vendor: Intel Corporation physical id: 107 bus info: pci@0000:ff:03.4 version: 04 width: 32 bits clock: 33MHz *-pci:8 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Control Registers vendor: Intel Corporation physical id: 108 bus info: pci@0000:ff:04.0 version: 04 width: 32 bits clock: 33MHz *-pci:9 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Address Registers vendor: Intel Corporation physical id: 109 bus info: pci@0000:ff:04.1 version: 04 width: 32 bits clock: 33MHz *-pci:10 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Rank Registers vendor: Intel Corporation physical id: 10a bus info: pci@0000:ff:04.2 version: 04 width: 32 bits clock: 33MHz *-pci:11 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers vendor: Intel Corporation physical id: 10b bus info: pci@0000:ff:04.3 version: 04 width: 32 bits clock: 33MHz *-pci:12 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Control Registers vendor: Intel Corporation physical id: 10c bus info: pci@0000:ff:05.0 version: 04 width: 32 bits clock: 33MHz *-pci:13 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Address Registers vendor: Intel Corporation physical id: 10d bus info: pci@0000:ff:05.1 version: 04 width: 32 bits clock: 33MHz *-pci:14 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Rank Registers vendor: Intel Corporation physical id: 10e bus info: pci@0000:ff:05.2 version: 04 width: 32 bits clock: 33MHz *-pci:15 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers vendor: Intel Corporation physical id: 10f bus info: pci@0000:ff:05.3 version: 04 width: 32 bits clock: 33MHz *-battery description: Lithium Ion Battery product: NK06053 vendor: SMP-ATL24 physical id: 1 slot: Primary capacity: 4800mWh configuration: voltage=11.1V lspci: 02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device 1522 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d4000000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd lsusb (with thumb drive plugged into USB3 port): Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 5986:01d0 Acer, Inc Bus 001 Device 004: ID 03f0:231d Hewlett-Packard

  Read the article

• Surface RT: To Be Or Not To Be (Part 1)

  - by smehaffie

  So the Surface RT has been out for 9 months and Microsoft just declared a $900 million dollar write-down. So how did this happen and what does it mean for Microsoft’s efforts to break into the tablet market? I have been thinking a lot about most of the information below since the Surface product line was released. If you are looking for a “Microsoft Is Dead” story, then don’t read any further. But if you want an honest look at what I think led Microsoft to this point and what I think can be done to make Surface RT devices better, then please continue reading. What Led Microsoft To The $900 Million Write-Down Surface Unveiling:Microsoft totally missed the boat when they unveiled the Surface product line on June 18th, 2012. Microsoft should’ve been ready to post the specifications of both devices that night. Microsoft should’ve had a site up and running right after the event so people could pre-order the devices. This would have given them a good idea what the interest was in each device.  They could also have used this data to make a better estimate for the number of units to to have available for the launch and beyond.  They also lost out on taking advantage of the excitement generated by the Surface RT and Surface Pro announcement. They could have thrown in a free touch keyboard to anyone who pre-ordered. The advertising should have started right after the announcement and gotten bigger as launch day approached. Push for as many pre-order as possible and build excitement for the launch. Actual Launch (Surface RT): By this time all excitement was gone from the initial announcement, except for the Micorsoft faithful. Microsoft should have been ready to sell the Surface in as many markets as possible at launch. The limited market release was a real letdown for a lot of people.  A limited release right after the initial announce is understandable, but not at the official launch of the product. Microsoft overpriced the device and now they are lowering it to what it should have been to start with. The $349 price is within the range I suggested it should be at before pricing was announced. (Surface Tablets: The Price Must Be Right). Limited ordering options online was also a killer. User should have been able to buy the base unit of each device and then add on whatever keyboard they wanted to (this applies more to the Surface Pro).  There should have also been a place where users could order any additional add-ins that they wanted to buy (covers, extra power supplies, etc.) Marketing was better and the dancing “Click In” commercial was cool, but the ads comparing the iPad with Siri should have been on the air from day one of the announcement (or at least the launch).  Consumers want to know why you tablet is better, not just that is has a clickable keyboard and built-in kickstand. They could have also compared it to some of the other mid-range tablets if they had not overprices it to begin with. Stock Applications (Mail, People, Calendar, Music, Video, Reader and IE): This is where Microsoft really blew it. They had all the time in the world to make these applications the best of breed and instead we got applications that seemed thrown together.  Some updates have made these application better, but they are all still lacking in features that should have been there from day one. This did not help to enhance a new users experience any. ** I will admit that the applications that were data driven were first class citizen’s and that makes it even more perplexing why MS could knock it out of the park with the Weather, Travel, Finance, Bing, etc.) and fail so miserably on the core applications users would use the most on a tablet. Desktop on Tablet: The desktop just is so out of place on the tablet  I understand it was needed for Office but think it would have been better to not have the desktop in Windows RT, but instead open up the Office applications in full screen mode, in a desktop shell (same goes for  IE11).That way the user wouldn’t realize they are leaving Metro and going to the desktop. The other option would have been to just not include Office on Windows RT devices. Instead they could have made awesome Widows Store Apps for Word, Excel, OneNote and PowerPoint. In addition, they could have made the stock Mail, People, and Calendar applications contain all the functions that Outlook gives desktop users. Having some of the settings in desktop mode and others under “Change PC Settings” made Windows RT seemed unfinished and rushed to market. What Can Be Done To Make Windows RT Based Tablets Better (At least in my opinion) Either eliminate the desktop all together from Windows RT or at least make the user experience better by hiding the fact the user is running Office/IE in the desktop. Personally I ‘d like them to totally get rid of it and just make awesome Windows Store Application version of Word, Excel PowerPoint & OneNote.  This might also make the OS smaller and give the user more available disk space. I doubt there will ever be a Windows Store App versions of Office, but I still think it is a good idea. Make is so users can easily direct their documents, picture, videos and music to their extra storage and can access these files from the standard libraries.  A user should not have to create a VM on their microSD card or create symbolic links to get this to work properly. Most consumers would not be able to do this. Then users get frustrated when they run out or room on their main storage because nothing is automatically save to their microSD card when saved to libraries.  This is a major bug that needs to be fixed, otherwise Microsoft’s selling point of having a microSD slot is worthless. Allows users to uninstall and re-install any of the Office product that come with the Surface. That way people can free up storage space by uninstalling the Office applications they do not need. Everyone’s needs are different, so make the options flexible. Don’t take up storage space for applications the user will not use. Make the Core applications the “Cream of the Crop” Windows App Store applications. The should set the bar for all other Store applications. Improve performance as much as possible, if it seems to be sluggish on a tablet consumer will not buy it. They need to price the next line of Surface product very aggressive to undercut not only iPad but also Android low end tablets (Nook, Kindle Fire, and Nexus, etc.) Give developers incentives to write quality applications for the devices. Don’t reward developers for cranking out cookie cutter, low quality applications. I’d even suggest Microsoft consider implementing some new store certification guideline to stop these type of applications being published. Allow users to easily move the recover disk “partition between their microSD card and main storage. My Predictions for the Surface RT and Windows RT I honestly think even with all the missteps MS has made since the announcement  about the Surface product line, that they are on the right path. I was excited the Surface tablets when they were announced, and I still am. The truth be told, Windows 8 on a tablet (aka: Windows RT) is better than both iOS and Android. My nephew who is an Apple fan boy told me after he saw and used Windows 8 (he got the beta running on his iPad), that Windows 8 kicked Apples butt as a tablet OS. So there is hope for all Windows RT based tablets. I agree with my nephew and that is why whenever anyone asks me about my Surface, I love showing it off and recommend it. The 6 keys to gaining market share in the tablet market are; Aggressive pricing by both Microsoft and their OEM’s Good quality devices put out by Microsoft and their OEM’s (there are some out there, but not enough) Marketing, Marketing, Marketing from both Microsoft and their OEM’s (Need more ads showing why windows based tablets are better than iPads and Android tablets) Getting Widows tablets in retails stores all over, and giving sales people incentive to sell them. Consumers like to try electronics out before they buy them, and most will listen to what the sales person suggest. Microsoft needs sales people in retail stores directing people to buy windows based tablets over iPads and Android tablets. I think the Microsoft Stores within Best Buy is a good start, but they also need to get prominent displays in Walmart, Target, etc.. Release a smaller form factor Surface, Hopefully the 8”-10” next generation Surface is not a rumor. Make “Surface” the brand name for all Microsoft tablets and hybrid devices that they come out with. They cannot change the name with each new release.  Make Surface synonymous with quality, the same way that iPad  is for Apple. Well, that is my 2 cents on the subject. Let me know your thoughts by leaving a comment below. Soon to follow will be my thought on the Surface Pro, so keep an eye out for it. var addthis_pub="smehaffie"; var addthis_options="email, print, digg, slashdot, delicious, twitter, live, myspace, facebook, google, stumbleupon, newsvine";

  Read the article

• Why is my Internet connection randomly dropping?

  - by Jeanno

  Ever since I have installed 12.04 (clean install not an upgrade), i have been having a drop in the Internet connection. The drop in the connection can be anything from 15 seconds to about 3 mins, and then the connection comes back. This behaviour happens while I am actively browsing the Internet, or if I wake up the computer and open Firefox (sometimes I have connection and sometimes I don't) . Please note that when the internet connection is on, it is not slow (as speedtest.net results show) In the beginning, I thought it was a problem with the driver r8169 for my RTL8111/8168B Ethernet card, so I downloaded the r8168 from Realtek website, followed the detailed instructions (blacklisted r8169, changed the file to '.bsh' ...), but still the same problem persisted. So I switched to a wireless connection, and I got the same problem with internet connection dropping randomly. Any ideas? Thanks in advance Output from 'lspci -v' Code: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f8000000-fa0fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dbffffff Capabilities: [88] Subsystem: Dell Device 04a7 Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f4000000-f60fffff Prefetchable memory behind bridge: 00000000c0000000-00000000cbffffff Capabilities: [88] Subsystem: Dell Device 04a7 Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at f6108000 (64-bit, non-prefetchable) [size=16] Capabilities: [50] Power Management version 3 Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at f6107000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f6100000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fa400000-fa4fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Prefetchable memory behind bridge: 00000000dc100000-00000000dc1fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fa300000-fa3fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fa200000-fa2fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f6106000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation P67 Express Chipset Family LPC Controller (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel modules: iTCO_wdt 00:1f.2 RAID bus controller: Intel Corporation 82801 SATA Controller [RAID mode] (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 42 I/O ports at f070 [size=8] I/O ports at f060 [size=4] I/O ports at f050 [size=8] I/O ports at f040 [size=4] I/O ports at f020 [size=32] Memory at f6105000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA v1.0 Capabilities: [b0] PCI Advanced Features Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: Dell Device 04a7 Flags: medium devsel, IRQ 5 Memory at f6104000 (64-bit, non-prefetchable) [size=256] I/O ports at f000 [size=32] Kernel modules: i2c-i801 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0dc5 (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at f8000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=128M] Memory at d8000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at fa000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 01:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at fa080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 02:00.0 VGA compatible controller: NVIDIA Corporation Device 0dc5 (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f4000000 (32-bit, non-prefetchable) [size=32M] Memory at c0000000 (64-bit, prefetchable) [size=128M] Memory at c8000000 (64-bit, prefetchable) [size=64M] I/O ports at d000 [size=128] Expansion ROM at f6000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at f6080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 03:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fa400000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 51 I/O ports at c000 [size=256] Memory at dc104000 (64-bit, prefetchable) [size=4K] Memory at dc100000 (64-bit, prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 03-00-00-00-68-4c-e0-00 Kernel driver in use: r8168 Kernel modules: r8168 05:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller (rev 01) (prog-if 10 [OHCI]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at fa300000 (64-bit, non-prefetchable) [size=2K] I/O ports at b000 [size=256] Capabilities: [50] Power Management version 3 Capabilities: [80] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [98] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [130] Device Serial Number 00-10-dc-ff-ff-cf-56-1a Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 06:00.0 SATA controller: JMicron Technology Corp. JMB362 SATA Controller (rev 10) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 19 I/O ports at a040 [size=8] I/O ports at a030 [size=4] I/O ports at a020 [size=8] I/O ports at a010 [size=4] I/O ports at a000 [size=16] Memory at fa210000 (32-bit, non-prefetchable) [size=512] Capabilities: [8c] Power Management version 3 Capabilities: [50] Express Legacy Endpoint, MSI 00 Kernel driver in use: ahci Note that my wireless card is not showing, I have the Ralink 3390 card (which apparently does not show up on Ubuntu for some reason), however I am able to connect to wireless network and connect to the internet (when it is working)

  Read the article

• CodePlex Daily Summary for Saturday, January 08, 2011

  CodePlex Daily Summary for Saturday, January 08, 2011Popular ReleasesExtended WPF Toolkit: Extended WPF Toolkit - 1.3.0: What's in the 1.3.0 Release?BusyIndicator ButtonSpinner ChildWindow ColorPicker - Updated (Breaking Changes) DateTimeUpDown - New Control Magnifier - New Control MaskedTextBox - New Control MessageBox NumericUpDown RichTextBox RichTextBoxFormatBar - Updated .NET 3.5 binaries and SourcePlease note: The Extended WPF Toolkit 3.5 is dependent on .NET Framework 3.5 and the WPFToolkit. You must install .NET Framework 3.5 and the WPFToolkit in order to use any features in the To...sNPCedit: sNPCedit v0.9d: added elementclient coordinate catcher to catch coordinates select a target (ingame) i.e. your char, npc or monster than click the button and coordinates+direction will be transfered to the selected row in the table corrected labels from Rot to Direction (because it is a vector)AutoLoL: AutoLoL v1.5.2: Implemented the Auto Updater Fix: Your settings will no longer be cleared with new releases of AutoLoL The mastery Editor and Browser now have their own tabs instead of nested tabs The Browser tab will only show the masteries matching ALL filters instead of just one Added a 'Browse' button in the Mastery Editor tab to open the Masteries Directory The Browser tab now shows a message when there are no mastery files in the Masteries Directory Fix: Fixed the Save As dialog again, for ...Ionics Isapi Rewrite Filter: 2.1 latest stable: V2.1 is stable, and is in maintenance mode. This is v2.1.1.25. It is a bug-fix release. There are no new features. 28629 29172 28722 27626 28074 29164 27659 27900 many documentation updates and fixes proper x64 build environment. This release includes x64 binaries in zip form, but no x64 MSI file. You'll have to manually install x64 servers, following the instructions in the documentation.StyleCop for ReSharper: StyleCop for ReSharper 5.1.14980.000: A considerable amount of work has gone into this release: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes: - StyleCop's new ObjectBasedEnvironment object does not resolve the StyleCop installation path, thus it does not return the correct path ...VivoSocial: VivoSocial 7.4.1: New release with bug fixes and updates for performance.SSH.NET Library: 2011.1.6: Fixes CommandTimeout default value is fixed to infinite. Port Forwarding feature improvements Memory leaks fixes New Features Add ErrorOccurred event to handle errors that occurred on different thread New and improve SFTP features SftpFile now has more attributes and some operations Most standard operations now available Allow specify encoding for command execution KeyboardInteractiveConnectionInfo class added for "keyboard-interactive" authentication. Add ability to specify bo....NET Extensions - Extension Methods Library for C# and VB.NET: Release 2011.03: Added lot's of new extensions and new projects for MVC and Entity Framework. object.FindTypeByRecursion Int32.InRange String.RemoveAllSpecialCharacters String.IsEmptyOrWhiteSpace String.IsNotEmptyOrWhiteSpace String.IfEmptyOrWhiteSpace String.ToUpperFirstLetter String.GetBytes String.ToTitleCase String.ToPlural DateTime.GetDaysInYear DateTime.GetPeriodOfDay IEnumberable.RemoveAll IEnumberable.Distinct ICollection.RemoveAll IList.Join IList.Match IList.Cast Array.IsNullOrEmpty Array.W...VidCoder: 0.8.0: Added x64 version. Made the audio output preview more detailed and accurate. If the chosen encoder or mixdown is incompatible with the source, the fallback that will be used is displayed. Added "Auto" to the audio mixdown choices. Reworked non-anamorphic size calculation to work better with non-standard pixel aspect ratios and cropping. Reworked Custom anamorphic to be more intuitive and allow display width to be set automatically (Thanks, Statick). Allowing higher bitrates for 6-ch....NET Voice Recorder: Auto-Tune Release: This is the source code and binaries to accompany the article on the Coding 4 Fun website. It is the Auto Tuner release of the .NET Voice Recorder application.BloodSim: BloodSim - 1.3.2.0: - Simulation Log is now automatically disabled and hidden when running 10 or more iterations - Hit and Expertise are now entered by Rating, and include option for a Racial Expertise bonus - Added option for boss to use a periodic magic ability (Dragon Breath) - Added option for boss to periodically Enrage, gaining a Damage/Attack Speed buffEnhSim: EnhSim 2.2.9 BETA: 2.2.9 BETAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Added in the Gobl...xUnit.net - Unit Testing for .NET: xUnit.net 1.7 Beta: xUnit.net release 1.7 betaBuild #1533 Important notes for Resharper users: Resharper support has been moved to the xUnit.net Contrib project. Important note for TestDriven.net users: If you are having issues running xUnit.net tests in TestDriven.net, especially on 64-bit Windows, we strongly recommend you upgrade to TD.NET version 3.0 or later. This release adds the following new features: Added support for ASP.NET MVC 3 Added Assert.Equal(double expected, double actual, int precision)...Json.NET: Json.NET 4.0 Release 1: New feature - Added Windows Phone 7 project New feature - Added dynamic support to LINQ to JSON New feature - Added dynamic support to serializer New feature - Added INotifyCollectionChanged to JContainer in .NET 4 build New feature - Added ReadAsDateTimeOffset to JsonReader New feature - Added ReadAsDecimal to JsonReader New feature - Added covariance to IJEnumerable type parameter New feature - Added XmlSerializer style Specified property support New feature - Added ...DbDocument: DbDoc Initial Version: DbDoc Initial versionASP .NET MVC CMS (Content Management System): Atomic CMS 2.1.2: Atomic CMS 2.1.2 release notes Atomic CMS installation guide N2 CMS: 2.1: N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. Major Changes Support for auto-implemented properties ({get;set;}, based on contribution by And Poulsen) All-round improvements and bugfixes File manager improvements (multiple file upload, resize images to fit) New image gallery Infinite scroll paging on news Content templates First time with N2? Try the demo site Download one of the template packs (above) and open the proj...Mobile Device Detection and Redirection: 0.1.11.10: IMPORTANT CHANGESThis release changes the way some WURFL capabilities and attributes are exposed to .NET developers. If you cast MobileCapabilities to return some values then please read the Release Note before implementing this release. The following code snippet can be used to access any WURFL capability. For instance, if the device is a tablet: string capability = Request.Browser["is_tablet"]; SummaryNew attributes have been added to the redirect section: originalUrlAsQueryString If se...Wii Backup Fusion: Wii Backup Fusion 1.0: - Norwegian translation - French translation - German translation - WBFS dump for analysis - Scalable full HQ cover - Support for log file - Load game images improved - Support for image splitting - Diff for images after transfer - Support for scrubbing modes - Search functionality for log - Recurse depth for Files/Load - Show progress while downloading game cover - Supports more databases for cover download - Game cover loading routines improvedBlogEngine.NET: BlogEngine.NET 2.0: Get DotNetBlogEngine for 3 Months Free! Click Here for More Info 3 Months FREE – BlogEngine.NET Hosting – Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.0 instructions. To get started, be sure to check out our installatio...New Projects2011 Scripting Games: Track Changes for the 2011 Scripting Games to be hosted on PoshCode by the Microsoft Scripting Guys and the PowerShell community. ADO.NET Unit Testable Repository Generator: Generates a strongly-typed Object Context and POCO Entities from your EDMX file. Additionally a Repository and an abstract Unit Test for the Repository is created (with a mock for the ObjectContext and mock for the ObjectSets). Bases on the "ADO.NET C# POCO Entity Generator".AshpazKhone: ???AVAilable Rooms: AVAilable Rooms Can be used to show and book rooms on an exchange serverContentManager: Content Manger for SAP Kpro exports the data pool of a content-server by PHIOS-Lists (txt-files) into local binary files. Afterwards this files can be imported in a SAP content-repository . The whole List of the PHIOS Keys can also be downloaded an splitted in practical units.CSLauncher: CSLauncher is a small application providing a launching interface similar to Counter Strike's weapons selection menu. You can organize your favorite applications in CSLauncher in the order you wish, then launch them by remembering their numbers.DbMetadata: A simple lightweight library used to retrieve database metadata.DotNetSiemensPLCToolBoxLibrary: DotNetSiemensPLCToolBoxLibrary A Library for working with Siemens Step5 and Step7 Projects, connecting to S5 or S7 PLC's.EmptyX: EmptyX is a game developped with c# and xna for the XNA CHALLENGE in AlgeriaERASMUS: Erasmus šitFaceDeBouc: Simplebook, le nouveau Facebook CPE! Technlogies .NET Serveur: - BDD SQLServer - Logique métier - Web services Clients: - client lourd WPF - client léger ASP.NETFunction resolver: Application using .NET Expression trees to resolve a function for a set of numbersMLRobotic: Programme de gestion MLRobotic 2011 Sissa ProjectMS CRM Multiple Attachment Download Application: Microsoft Dynamics CRM 4.0 currently does not have a built in way for CRM Administrators to Export multiple attachments from the database and store it on a local directory on the Server or the local PC. This application allows you to do so.Open Data Publisher: Open Data Publisher is a C# MVC application that allows you to quickly and easily publish data from SQL Server tables and views using the OData protocol, and present data from OData and static sources to the public for download and exploration.OttawaZagreb1: Test projectPrague: ????? ?? ???? ??????PSSplunk: PSSplunk is a set of Powershell cmdlets that use the RESTFUL API provided by www.splunk.com The goal is provide access to all of Splunks configuration and search features from the CLI without having to have Splunk installed locally.Reactive C#: Reactive language extensions for C#SemanaWebcasts: Projeto para semana de webcasts.Steward: Personal StewardSVNUG.Tracker: SVNUG.Tracker is an example task tracking application used as a presentation project for the Sangamon Valley .NET User Group (svnug.com). The purpose of SVNUG.Tracker is to be a common problem domain for exercising new .NET technology. SVNUG.Tracker is written in C# 4.The Silverlight Cookbook - A Reference Application for Silverlight 4 LOB Apps: The Silverlight Cookbook is a .NET example application that demonstrates how to build a full-blown line-of-business app using the reference architecture explained at: http://www.dennisdoomen.net/search/label/Silverlight Vkontakte Wpf Client: This is a simple client for social network Vkontakte. It can send message to your friends, download audio files or play it,list user video. Also you can view user status and change yours.Windows Phone Multilingual Keyboard: Multilingual keyboard for Windows Phone 7WPF Controls & MVVM Practices: WPF Controls contains various controls that can be used in applications. Currently Featured * FilteredListBox (filter and selected items notification) * IsDirty functionality for a ViewModel model

  Read the article

• CodePlex Daily Summary for Friday, August 10, 2012

  CodePlex Daily Summary for Friday, August 10, 2012Popular ReleasesMugen Injection: Mugen Injection 2.6: Fixed incorrect work with children when creating the MugenInjector. Added the ability to use the IActivator after create object using MethodBinding or CustomBinding. Added new fluent syntax for MethodBinding and CustomBinding. Added new features for working with the ModuleManagerComponent. Fixed some bugs.Windows Uninstaller: Windows Uninstaller v1.0: Delete Windows once You click on it. Your Anti Virus may think It is Virus because it delete Windows. Prepare a installation disc of any operating system before uninstall. ---Steps--- 1. Prepare a installation disc of any operating system. 2. Backup your files if needed. (Optional) 3. Run winuninstall.bat . 4. Your Computer will shut down, When Your Computer is shutting down, it is uninstalling Windows. 5. Re-Open your computer and quickly insert the installation disc and install the new ope...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.1.2 (Win 8 RP) - Source: WinRT XAML Toolkit based on the Release Preview SDK. For compiled version use NuGet. From View/Other Windows/Package Manager Console enter: PM> Install-Package winrtxamltoolkit http://nuget.org/packages/winrtxamltoolkit Features Controls Converters Extensions IO helpers VisualTree helpers AsyncUI helpers New since 1.0.2 WatermarkTextBox control ImageButton control updates ImageToggleButton control WriteableBitmap extensions - darken, grayscale Fade in/out method and prope...WebDAV Test Application: v1.0.0.0: First releaseHTTP Server API Configuration: HttpSysManager 1.0: *Set Url ACL *Bind https endpoint to certificateFluentData -Micro ORM with a fluent API that makes it simple to query a database: FluentData version 2.3.0.0: - Added support for SQLite, PostgreSQL and IBM DB2. - Added new method, QueryDataTable which returns the query result as a datatable. - Fixed some issues. - Some refactoring. - Select builder with support for paging and improved support for auto mapping.jQuery Mobile C# ASP.NET: jquerymobile-18428.zip: Full source with AppHarbor, AppHarbor SQL, SQL Express, Windows Azure & SQL Azure hosting.eel Browser: eel 1.0.2 beta: Bug fixesJSON C# Class Generator: JSON CSharp Class Generator 1.3: Support for native JSON.net serializer/deserializer (POCO) New classes layout option: nested classes Better handling of secondary classesProgrammerTimer: ProgrammerTimer: app stays hidden in tray and periodically pops up (a small form in the bottom left corner) to notify that you need to rest while also displaying the time remaining to rest, once the resting time elapses it hides back to tray while app is hidden in tray you can double click it and it will pop up showing you working time remaining, double click again on the tray and it will hide clicking on the popup will hide it hovering the tray icon will show the state working/resting and time remainin...Axiom 3D Rendering Engine: v0.8.3376.12322: Changes Since v0.8.3102.12095 ===================================================================== Updated ndoc3 binaries to fix bug Added uninstall.ps1 to nuspec packages fixed revision component in version numbering Fixed sln referencing VS 11 Updated OpenTK Assemblies Added CultureInvarient to numeric parsing Added First Visual Studio 2010 Project Template (DirectX9) Updated SharpInputSystem Assemblies Backported fix for OpenGL Auto-created window not responding to input Fixed freeInterna...Captcha MVC: Captcha Mvc 2.1.1: v 2.1.1: Fixed problem with serialization. Minor changes. v 2.1: Added support for storing captcha in the session or cookie. See the updated example. Updated example. Minor changes. v 2.0.1: Added support for a partial captcha. Now you can easily customize the layout, see the updated example. Updated example. Minor changes. v 2.0: Completely rewritten the whole code. Now you can easily change or extend the current implementation of the captcha.(In the examples show how to add a...DotSpatial: DotSpatial 1.3: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Tutorials are available. Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components ...BugNET Issue Tracker: BugNET 1.0: This release brings performance enhancements, improvements and bug fixes throughout the application. Various parts of the UI have been made consistent with the rest of the application and custom queries have been improved to better handle custom fields. Spanish and Dutch languages were also added in this release. Special thanks to wrhighfield for his many contributions to this release! Upgrade Notes Please see this thread regarding changes to the web.config and files in this release. htt...Iveely Search Engine: Iveely Search Engine (0.1.0): ?????????，???????????。 This is a basic version, So you do not think it is a good Search Engine of this version, but one day it is. only basic on text search. ????： How to use: 1. ?????????IveelySE.Spider.exe ??，????????????，?????????（?????，???????，??????????????。） Find the file which named IveelySE.Spider.exe, and input you link string like "http://www.cnblogs.com",and enter. 2 . ???????，???????IveelySE.Index.exe ????，????。?????。 When the spider finish working,you can run anther file na...Video Frame Explorer: Beta 3: Fix small bugsJson.NET: Json.NET 4.5 Release 8: New feature - Serialize and deserialize multidimensional arrays New feature - Members on dynamic objects with JsonProperty/DataMember will now be included in serialized JSON New feature - LINQ to JSON load methods will read past preceding comments when loading JSON New feature - Improved error handling to return incomplete values upon reaching the end of JSON content Change - Improved performance and memory usage when serializing Unicode characters Change - The serializer now create...????: ????2.0.4: 1、??????????，?????、????、???????????。 2、???????????。RiP-Ripper & PG-Ripper: RiP-Ripper 2.9.32: changes NEW: Added Support for "ImgBox.com" links CHANGES: Switched Installer to InnoSetupjHtmlArea - WYSIWYG HTML Editor for jQuery: 0.7.5: Fixed "html" method Fixed jQuery UI Dialog ExampleNew ProjectsAuthorized Action Link Extension for ASP.NET MVC: ASP.NET HtmlHelper extension to only display links (or other text) if user is authorized for target controller action.AutoShutdown.NET: Automatically Shutdown, Hibernate, Lock, Standby or Logoff your computer with an full featured, easy to use applicationAvian Mortality Detection Entry Application: This application is written for Trimble Yuma rugged computers on Wind Farms. It allows the field staff to create and upload detentions of avian fatalities.China Coordinate: As all know, China's electronic map has specified offset. The goal of this project is to fix or correct the offset, and should as easy to use as possible.cnFederal: This project is supposed to show implementing several third party API:s using ASP.NET Web forms.ControlAccessUser: sadfsafadsDeskopeia: Experimental Deskopeia Project, not yet finisheddfect: Defect/Issue Tracking line of business application.Express Workflow: Express WorkflowGavin.Shop: A b2c Of mvc3+entityframework HTTP Server API Configuration: Friendly user interface substitute for netsh http. Configure http.sys easily.labalno: Films and moviesLibNiconico: ?????????????LifeFlow.Servicer: This project is only a day old, but the main goal is to create an easy way to create and maintain .NET-based REST servicesMemcached: Memcached is an in-memory key-value store for small chunks of arbitrary data (strings, objects) from results of database calls, API calls, or page rendering.MongoDB: MongoDB (from "humongous") is a scalable, high-performance, open source NoSQL database. Written in C++, MongoDB features:Network Gnome: An attempt to create an open source alternative to "The Dude" by Mikro Tik.PowerShell Study: ??Powershell???sfmltest: Just learning SfmlSharePoint Timerjob and IoC: This is a sample project that explains how we can use IoC container with SharePoint. I have used StructureMap as an IoC container in this project.SignalR: Async library for .NET to help build real-time, multi-user interactive web applications. Sistem LPK Pemkot Semarang: Sistem Laporan Pelaksanaan Kegiatan SKPD Kota SemarangSitecoreInstaller: SitecoreInstaller was initially developed for rapid installation of Sitecore and modules on a local developer machine and still does the job well. SQL 2012 Always On Login Syncing: SQL 2012 Always on Availability Group Login Syncing job.Swagonomics: Input your name, age, yearly income, amount spent monthly on VAT taxable goods, alcohol, cigarettes, and fuel. After hitting submit, the application calls our ATapatalk Module for Dotnetnuke Core Forum: Hi, I work for months in a plug for Dotnetnuke core forums, I have enough work done, the engine RPCXML, the Web service and a skeleton of the main functions, buTesla Analyzer: Given the great need of energy saving due to the rising price of KW, and try to educate the consumer smart energy companies.testdd09082012git01: xctestdd09082012hg01: xctesttfs09082012tfs01: sdThe Ftp Library - Most simple, full-featured .NET Ftp Library: The Ftp Library - Most simple, full-featured .NET Ftp LibraryThe Verge .NET: This is a port of the existing iOS and Android applications to Windows Phone. This project is not sponsored nor endorsed by The Verge or Vox Media . . . yet :)Util SPServices: Usefull Libraries for SPServices SPServices is one of the most usefull libraries for SharePoint 2010 and this util is just a bunch of functions that helpme to Virtual Keyboard: This is a virtual keyboard project. This can do most of what a keyboard does. whatzup.mobi: Provide streams to mobile devices via a webservice that exposes various live broadcasted audio streams from night clubs.WPFSharp.Globalizer: WPFSharp Globalizer - A project deisgned to make localization and styling easier by decoupling both processes from the build.

  Read the article

• April 30th Links: ASP.NET, ASP.NET MVC, Visual Studio 2010

  - by ScottGu

  Here is the latest in my link-listing series. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] ASP.NET Data Web Control Enhancements in ASP.NET 4.0: Scott Mitchell has a good article that summarizes some of the nice improvements coming to the ASP.NET 4 data controls. Refreshing an ASP.NET AJAX UpdatePanel with JavaScript: Scott Mitchell has another nice article in his series on using ASP.NET AJAX that demonstrates how to programmatically trigger an UpdatePanel refresh using JavaScript on the client. ASP.NET MVC ASP.NET MVC 2: Basics and Introduction: Scott Hanselman delivers an awesome introductory talk on ASP.NET MVC.  Great for people looking to understand and learn ASP.NET MVC. ASP.NET MVC 2: Ninja Black Belt Tips: Another great talk by Scott Hanselman about how to make the most of several features of ASP.NET MVC 2. ASP.NET MVC 2 Html.Editor/Display Templates: A great blog post detailing the new Html.EditorFor() and Html.DisplayFor() helpers within ASP.NET MVC 2. MVCContrib Grid: Jeremy Skinner’s video presentation about the new Html.Grid() helper component within the (most awesome) MvcContrib project for ASP.NET MVC. Code Snippets for ASP.NET MVC 2 in VS 2010: Raj Kaimal documents some of the new code snippets for ASP.NET MVC 2 that are now built-into Visual Studio 2010.  Read this article to learn how to do common scenarios with fewer keystrokes. Turn on Compile-time View Checking for ASP.NET MVC Projects in TFS 2010 Build: Jim Lamb has a nice post that describes how to enable compile-time view checking as part of automated builds done with a TFS Build Server.  This will ensure any errors in your view templates raise build-errors (allowing you to catch them at build-time instead of runtime). Visual Studio 2010 VS 2010 Keyboard Shortcut Posters for VB, C#, F# and C++: Keyboard shortcut posters that you can download and then printout. Ideal to provide a quick reference on your desk for common keystroke actions inside VS 2010. My Favorite New Features in VS 2010: Scott Mitchell has a nice article that summarizes some of his favorite new features in VS 2010.  Check out my VS 2010 and .NET 4 blog series for more details on some of them. 6 Cool VS 2010 Quick Tips and Features: Anoop has a nice blog post describing 6 cool features of VS 2010 that you can take advantage of. SharePoint Development with VS 2010: Beth Massi links to a bunch of nice “How do I?” videos that that demonstrate how to use the SharePoint development support built-into VS 2010. How to Pin a Project to the Recent Projects List in VS 2010: A useful tip/trick that demonstrates how to “pin” a project to always show up on the “Recent Projects” list within Visual Studio 2010. Using the WPF Tree Visualizer in VS 2010: Zain blogs about the new WPF Tree Visualizer supported by the VS 2010 debugger.  This makes it easier to visualize WPF control hierarchies within the debugger. TFS 2010 Power Tools Released: Brian Harry blogs about the cool new TFS 2010 extensions released with this week’s TFS 2010 Power Tools release. What is New with T4 in VS 2010: T4 is the name of Visual Studio’s template-based code generation technology.  Lots of scenarios within VS 2010 now use T4 for code generation customization. Two examples are ASP.NET MVC Views and EF4 Model Generation.  This post describes some of the many T4 infrastructure improvements in VS 2010. Hope this helps, Scott P.S. If you haven’t already, check out this month’s "Find a Hoster” page on the www.asp.net website to learn about great (and very inexpensive) ASP.NET hosting offers.

  Read the article

• Raspberry Pi entrance signed backed by Umbraco - Part 1

  - by Chris Houston

  Being experts on all things Umbraco, we jumped at the chance to help our client, QV Offices, with their pressing signage predicament. They needed to display a sign in the entrance to their building and approached us for our advice. Of course it had to be electronic: displaying multiple names of their serviced office clients, meeting room bookings and on-the-pulse promotions. But with a winding Victorian staircase and minimal storage space how could the monitor be run, updated and managed? That’s where we came in…Raspberry PiUmbraco CMSAutomatic updatesAutomated monitor of the signPower saving when the screen is not in useMounting the screenThe screen that has been used is a standard LED low energy Full HD screen and has been mounted on the wall using it's VESA mounting points, as the wall is a stud wall we were able to add an access panel behind the screen to feed through the mains, HDMI and sensor cables.The Raspberry Pi is then tucked away out of sight in the main electrical cupboard which just happens to be next to the sign, we had an electrician add a power point inside this cupboard to allow us to power the screen and the Raspberry Pi.Designing the interface and editing the contentAlthough a room sign was the initial requirement from QV Offices, their medium term goal has always been to add online meeting booking to their website and hence we suggested adding information about the current and next day's meetings to the sign that would be pulled directly from their online booking system.We produced the design and built the web page to fit exactly on a 1920 x 1080 screen (Full HD in Portrait)As you would expect all the information can be edited via an Umbraco CMS, they are able to add floors, rooms, clients and virtual clients as well as add meeting bookings to their meeting diary.How we configured the Raspberry PiAfter receiving a new Raspberry Pi we downloaded the latest release of Raspbian operating system and followed the official guide which shows how to copy the OS onto an SD card from a Mac, we then followed the majority of steps on this useful guide: 10 Things to Do After Buying a Raspberry Pi.Installing ChromiumWe chose to use the Chromium web browser which for those who do not know is the open sourced version of Google Chrome. You can install this from the terminal with the following command:sudo apt-get install chromium-browserInstalling UnclutterWe found this little application which automatically hides the mouse pointer, it is used in the script below and is installed using the following command:sudo apt-get install unclutterAuto start Chromium and disabling the screen saver, power saving and mouseWhen the Raspberry Pi has been installed it will not have a keyboard or mouse and hence if their was a power cut we needed it to always boot and re-loaded Chromium with the correct URL.Our preferred command line text editor is Nano and I have assumed you know how to use this editor or will be able to work it out pretty quickly.So using the following command:sudo nano /etc/xdg/lxsession/LXDE/autostartWe then changed the autostart file content to:@lxpanel --profile LXDE@pcmanfm --desktop --profile LXDE@xscreensaver -no-splash@xset s off@xset -dpms@xset s noblank@chromium --kiosk --incognito http://www.qvoffices.com/someURL@unclutter -idle 0The first few commands turn off the screen saver and power saving, we then open Cromium in Kiosk Mode (full screen with no menu etc) and pass in the URL to use (I have changed the URL in this example) We found a useful blog post with the Cromium command line switches.Finally we also open an application called Unclutter which auto hides the mouse after 0 seconds, so you will never see a mouse on the sign.We also had to edit the following file:sudo nano /etc/lightdm/lightdm.confAnd added the following line under the [SeatDefault] section:xserver-command=X -s 0 dpmsRefreshing the screenWe decided to try and add a scheduled task that would trigger Chromium to reload the page, at some point in the future we might well change this to using Javascript to update the content, but for now this works fine.First we installed the XDOTool which enables you to script Keyboard commands:sudo apt-get install xdotoolWe used the Refreshing Chromium Browser by Shell Script post as a reference and created the following shell script (which we called refreshing.sh):export DISPLAY=":0"WID=$(xdotool search --onlyvisible --class chromium|head -1)xdotool windowactivate ${WID}xdotool key ctrl+F5This selects the correct display and then sends a CTRL + F5 to refresh Chromium.You will need to give this file execute permissions:chmod a=rwx refreshing.shNow we have the script file setup we just need to schedule it to call this script periodically which is done by using Crontab, to edit this you use the following command:crontab -eAnd we added the following:*/5 * * * * DISPLAY=":.0" /home/pi/scripts/refreshing.sh >/home/pi/cronlog.log 2>&1This calls our script every 5 minutes to refresh the display and it logs any errors to the cronlog.log file.SummaryQV Offices now have a richer and more manageable booking system than they did before we started, and a great new sign to boot.How could we make sure that the sign was running smoothly downstairs in a busy office centre? A second post will follow outlining exactly how Vizioz enabled QV Offices to monitor their sign simply and remotely, from the comfort of their desks.

  Read the article

< Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >