null layout manager - Page 226

7 - drupal overriding theme fucntions gettting notices

- by welovedesign

So I am overriding a theme function by putting the contents in my template.php module, the problem is that it it throwing up loads of undefined index notices because there are lots of functions that are defined in the module. How can I define these in the template.php file and prevent the notices. Note: I know i can turn them off 'uc_cart_block_content' => array( 'variables' => array( 'help_text' => NULL, 'items' => NULL, 'item_count' => NULL, 'item_text' => NULL, 'total' => NULL, 'summary_links' => NULL, 'collapsed' => TRUE, ), 'file' => 'uc_cart.theme.inc', ),

Read the article

How to call 3 threads sequentially many times?

- by Hello

How to call 3 threads sequentially many times? For example: In iteration 1, execution order should be "Thread0-thread1-thread2" then in iteration 2 should be same i.e "Thread0 - thread1-thread2" and so on. The sample code is just executing 3 threads only once. It is not going to 2nd iteration. Thread0 = CreateThread( NULL,0,ThreadProc0, NULL, CREATE_SUSPENDED, &ThreadID); Thread1 = CreateThread( NULL,0,ThreadProc1, NULL, CREATE_SUSPENDED, &ThreadID); Thread2 = CreateThread( NULL,0,ThreadProc2, NULL, CREATE_SUSPENDED, &ThreadID); for(i=0;i<iterations;i++) //Iterations in calling threads { ResumeThread(Thread0); WaitForSingleObject(Thread0, INFINITE); ResumeThread(Thread1); WaitForSingleObject(Thread1, INFINITE); ResumeThread(Thread2); WaitForSingleObject(Thread2, INFINITE); } // Close thread and semaphore handles

Read the article

Outer select column value in joined subquery?

- by Michael DePetrillo

Is it possible to use a column value from an outer select within a joined subquery? SELECT table1.id, table2.cnt FROM table1 LEFT JOIN (SELECT COUNT(*) as `cnt` FROM table2 where table2.lt > table1.lt and table2.rt < table1.rt) as table2 ON 1; This results in "Unknown column 'table1.lt' in 'where clause'". Here is the db dump. CREATE TABLE IF NOT EXISTS `table1` ( `id` int(1) NOT NULL, `lt` int(1) NOT NULL, `rt` int(4) NOT NULL) ENGINE=MyISAM DEFAULT CHARSET=latin1; CREATE TABLE IF NOT EXISTS `table2` ( `id` int(1) NOT NULL, `lt` int(1) NOT NULL, `rt` int(4) NOT NULL) ENGINE=MyISAM DEFAULT CHARSET=latin1; INSERT INTO `table1` (`id`, `lt`, `rt`) VALUES (1, 1, 4); INSERT INTO `table2` (`id`, `lt`, `rt`) VALUES (2, 2, 3);

Read the article

weird index behavior

- by TasostheGreat

I have set up my table with an index only on done_status(done_status =INT), when I use EXPLAIN SELECT * FROM reminder WHERE done_status=2 i get this back id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE reminder ALL done_status NULL NULL NULL 5 Using where but when I give this command EXPLAIN SELECT * FROM reminder WHERE done_status=1 that's what I get back: id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE reminder ref done_status done_status 4 const 2 first time it shows me it uses 5 rows second time 2 rows I don't think the index works, if I understood it right first time it should give me 3 rows. What do I do wrong? SHOW INDEX FROM reminder: Table Non_unique Key_name Seq_in_index Column_name Collation Cardinality Sub_part Packed Null Index_type Comment Index_comment reminder 1 done_status 1 done_status A 5 NULL NULL BTREE

Read the article

BizTalk and IBM WebSphere MQ Errors

- by Christopher House

The project I'm currently working on is going to make heavy use of IBM WebShere MQ to send messages from BizTalk to the client's iSeries box. I'd never previously worked with WebSphere MQ, so I didn't really have any idea what it would take to get this to work. I was pleasantly surprised that it wasn't too difficult to configure a send port and pass messages through it to a queue. Or so I thought... A couple of weeks ago, the client gave me the name of a host, queue manager and queue that I'd been using for my development. Everything was going great, I was able to put messages onto the queue, I was happy, the client was happy. Life was good. Then the client tells me that the host I've been connecting to is actually a Solaris box and that in prod, we'll actually be sending to an iSeries. We both agree that it would behoove us to start pointing my dev environment to their dev iSeries box in order to flush out any weirdness there might be. As it turns out, it was a good thing we made the change. As soon as I reconfigured my BRE policy that sets endpoint information to point to the iSeries queue, we started seeing failures in the event log. An example from the event log: Event Type: Error Event Source: BizTalk Server 2009 Event Category: BizTalk Server 2009 Event ID: 5754 Date: 6/9/2010 Time: 10:16:41 AM User: N/A Computer: WINDOWS2003 Description: A message sent to adapter "MQSC" on send port "<my dynamic sendport name>" with URI "mqsc://client/tcp/<hostname>(1414)/<queue manager name>/<queue name>" is suspended. Error details: Failure encountered while attempting to open queue. queue = <queue name> queueManager = <queue manager name>, reasonCode = 6124 MessageId: {76825C7C-611A-4A56-8A6F-35E1124BDB5C} InstanceID: {BA389103-DF9B-493F-8C61-44574822AAD6} The key piece of information in the event entry is the reasonCode, 6124. A quick Google search shows that reasonCode 6124 is the code for MQRC_NOT_CONNECTED. According to IBM's docs, this means that you've tried to send a message without first opening a connection to the queue manager. Obviously, in the context of BizTalk, this is an unexpected error, since this sort of thing should be managed entirely by the send adapter. Perusing IBM's documentation a bit more, I came across some info on how to turn on tracing for MQ. With tracing enabled, I tried sending a message again, then went and reviewed the trace files. The bulk of the information in the trace files didn't mean a thing to me, but at the end of one of the files, I did notice this: 00006257 15:40:20.327795 3500.4 RSESS:000009 ------{ reqReleaseConn 00006258 15:40:20.328714 3500.4 RSESS:000009 ------} reqReleaseConn (rc=OK) 00006259 15:40:20.328727 3500.4 RSESS:000009 ------{ xcsClearTraceIdent 0000625A 15:40:20.328739 3500.4 : ------} xcsClearTraceIdent (rc=OK) 0000625B 15:40:20.328752 3500.4 : -----}! trmzstMQCONNX (rc=MQRC_NOT_AUTHORIZED) 0000625C 15:40:20.328765 3500.4 : ----}! MQCONNX (rc=MQRC_NOT_AUTHORIZED) 0000625D 15:40:20.328766 3500.4 : ---}! ImqQueueManager::connect (rc=MQRC_NOT_AUTHORIZED) 0000625E 15:40:20.328767 3500.4 : --}! ImqObject::open (rc=MQRC_NOT_CONNECTED) 0000625F 15:40:20.328768 3500.4 : --{ ImqQueue::lock 00006260 15:40:20.328769 3500.4 : --}! ImqQueue::lock (rc=Unknown(1)) 00006261 15:40:20.328769 3500.4 : --{ ImqQueue::unlock 00006262 15:40:20.328769 3500.4 : --}! ImqQueue::unlock (rc=Unknown(1)) It seemed like the MQRC_NOT_CONNECTED error was being caused by a security related issue (MQRC_NOT_AUTHORIZED). I did notice something earlier in the log where it appeared that MQ was passing a field named UID with a value equal to the account name that my BizTalk service was running under. I ended up creating a new local account on the BizTalk server that had the same name as a user which had access to the queue manager on the iSeries. I then created a new host instance that ran under this new account, created a send handler for the MQSC adapter on this new host instance and reconfigured my orchestration to run on the new host instance. After bouncing all my host instances, I was now able to send messages to the iSeries. It's still not clear to me why we were able to connect to the Solaris server. I ended up contacting IBM's support and they did confirm that the process sending to MQ does in fact pass the identity to the queue manager it's connecting to.

Read the article

SQLAuthority News – Guest Post – Performance Counters Gathering using Powershell

- by pinaldave

Laerte Junior Laerte Junior has previously helped me personally to resolve the issue with Powershell installation on my computer. He did awesome job to help. He has send this another wonderful article regarding performance counter for readers of this blog. I really liked it and I expect all of you who are Powershell geeks, you will like the same as well. As a good DBA, you know that our social life is restricted to a few movies over the year and, when possible, a pizza in a restaurant next to your company’s place, of course. So what we have to do is to create methods through which we can facilitate our daily processes to go home early, and eventually have a nice time with our family (and not sleeping on the couch). As a consultant or fixed employee, one of our daily tasks is to monitor performance counters using Perfmom. To be honest, IDE is getting more complicated. To deal with this, I thought a solution using Powershell. Yes, with some lines of Powershell, you can configure which counters to use. And with one more line, you can already start collecting data. Let’s see one scenario: You are a consultant who has several clients and has just closed another project in troubleshooting an SQL Server environment. You are to use Perfmom to collect data from the server and you already have its XML configuration files made with the counters that you will be using- a file for memory bottleneck f, one for CPU, etc. With one Powershell command line for each XML file, you start collecting. The output of such a TXT file collection is set to up in an SQL Server. With two lines of command for each XML, you make the whole process of data collection. Creating an XML configuration File to Memory Counters: Get-PerfCounterCategory -CategoryName "Memory" | Get-PerfCounterInstance | Get-PerfCounterCounters |Save-ConfigPerfCounter -PathConfigFile "c:\temp\ConfigfileMemory.xml" -newfile Creating an XML Configuration File to Buffer Manager, counters Page lookups/sec, Page reads/sec, Page writes/sec, Page life expectancy: Get-PerfCounterCategory -CategoryName "SQLServer:Buffer Manager" | Get-PerfCounterInstance | Get-PerfCounterCounters -CounterName "Page*" | Save-ConfigPerfCounter -PathConfigFile "c:\temp\BufferManager.xml" –NewFile Then you start the collection: Set-CollectPerfCounter -DateTimeStart "05/24/2010 08:00:00" -DateTimeEnd "05/24/2010 22:00:00" -Interval 10 -PathConfigFile c:\temp\ConfigfileMemory.xml -PathOutputFile c:\temp\ConfigfileMemory.txt To let the Buffer Manager collect, you need one more counters, including the Buffer cache hit ratio. Just add a new counter to BufferManager.xml, omitting the new file parameter Get-PerfCounterCategory -CategoryName "SQLServer:Buffer Manager" | Get-PerfCounterInstance | Get-PerfCounterCounters -CounterName "Buffer cache hit ratio" | Save-ConfigPerfCounter -PathConfigFile "c:\temp\BufferManager.xml" And start the collection: Set-CollectPerfCounter -DateTimeStart "05/24/2010 08:00:00" -DateTimeEnd "05/24/2010 22:00:00" -Interval 10 -PathConfigFile c:\temp\BufferManager.xml -PathOutputFile c:\temp\BufferManager.txt You do not know which counters are in the Category Buffer Manager? Simple! Get-PerfCounterCategory -CategoryName "SQLServer:Buffer Manager" | Get-PerfCounterInstance | Get-PerfCounterCounters Let’s see one output file as shown below. It is ready to bulk insert into the SQL Server. As you can see, Powershell makes this process incredibly easy and fast. Do you want to see more examples? Visit my blog at Shell Your Experience You can find more about Laerte Junior over here: www.laertejuniordba.spaces.live.com www.simple-talk.com/author/laerte-junior www.twitter.com/laertejuniordba SQL Server Powershell Extension Team: http://sqlpsx.codeplex.com/ Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: SQL, SQL Add-On, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL, Technology Tagged: Powershell

Read the article

New security options in UCM Patch Set 3

- by kyle.hatlestad

While the Patch Set 3 (PS3) release was mostly focused on bug fixes and such, some new features sneaked in there. One of those new features is to the security options. In 10gR3 and prior versions, UCM had a component called Collaboration Manager which allowed for project folders to be created and groups of users assigned as members to collaborate on documents. With this component came access control lists (ACL) for content and folders. Users could assign specific security rights on each and every document and folder within a project. And it was even possible to enable these ACL's without having the Collaboration Manager component enabled (see technote# 603148.1). When 11g came out, Collaboration Manager was no longer available. But the configuration settings to turn on ACLs were still there. Well, in PS3 they're implemented slightly differently. And there is a new component available which adds an additional dimension to define security on the object, Roles. So now instead of selecting individual users or groups of users (defined as an Alias in User Admin), you can select a particular role. And if a user has that role, they are granted that level of access. This can allow for a much more flexible and manageable security model instead of trying to manage with just user and group access as people come and go in the organization. The way that it is enabled is still through configuration entries. First log in as an administrator and go to Administration -> Admin Server. On the Component Manager page, click the 'advanced component manager' link in the description paragraph at the top. In the list of Disabled Components, enable the RoleEntityACL component. Then click the General Configuration link on the left. In the Additional Configuration Variables text area, enter the new configuration values: UseEntitySecurity=true SpecialAuthGroups=<comma separated list of Security Groups to honor ACLs> The SpecialAuthGroups should be a list of Security Groups that honor the ACL fields. If an ACL is applied to a content item with a Security Group outside this list, it will be ignored. Save the settings and restart the instance. Upon restart, three new metadata fields will be created: xClbraUserList, xClbraAliasList, xClbraRoleList. If you are using OracleTextSearch as the search indexer, be sure to run a Fast Rebuild on the collection. On the Check In, Search, and Update pages, values are added by simply typing in the value and getting a type-ahead list of possible values. Select the value, click Add and then set the level of access (Read, Write, Delete, or Admin). If all of the fields are blank, then it simply falls back to just Security Group and Account access. For Users and Groups, these values are automatically picked up from the corresponding database tables. In the case of Roles, this is an explicitly defined list of choices that are made available. These values must match the role that is being defined from WebLogic Server or you LDAP/AD repository. To add these values, go to Administration -> Admin Applets -> Configuration Manager. On the Views tab, edit the values for the ExternalRolesView. By default, 'guest' and 'authenticated' are added. Once added to through the view, they will be available to select from for the Roles Access List. As for how they are stored in the metadata fields, each entry starts with it's identifier: ampersand (&) symbol for users, "at" (@) symbol for groups, and colon (:) for roles. Following that is the entity name. And at the end is the level of access in paranthesis. e.g. (RWDA). And each entry is separated by a comma. So if you were populating values through batch loader or an external source, the values would be defined this way. Detailed information on Access Control Lists can be found in the Oracle Fusion Middleware System Administrator's Guide for Oracle Content Server.

Read the article

Creating and using VM Groups in VirtualBox

- by Fat Bloke

With VirtualBox 4.2 we introduced the Groups feature which allows you to organize and manage your guest virtual machines collectively, rather than individually. Groups are quite a powerful concept and there are a few nice features you may not have discovered yet, so here's a bit more information about groups, and how they can be used.... Creating a group Groups are just ad hoc collections of virtual machines and there are several ways of creating a group: In the VirtualBox Manager GUI: Drag one VM onto another to create a group of those 2 VMs. You can then drag and drop more VMs into that group; Select multiple VMs (using Ctrl or Shift and click) then select the menu: Machine...Group; or press Cmd+U (Mac), or Ctrl+U(Windows); or right-click the multiple selection and choose Group, like this: From the command line: Group membership is an attribute of the vm so you can modify the vm to belong in a group. For example, to put the vm "Ubuntu" into the group "TestGroup" run this command: VBoxManage modifyvm "Ubuntu" --groups "/TestGroup" Deleting a Group Groups can be deleted by removing a group attribute from all the VMs that constitute that group. To do this via the command-line the syntax is: VBoxManage modifyvm "Ubuntu" --groups "" In the VirtualBox Manager, this is more easily done by right-clicking on a group header and selecting "Ungroup", like this: Multiple Groups Now that we understand that Groups are just attributes of VMs, it can be seen that VMs can exist in multiple groups, for example, doing this: VBoxManage modifyvm "Ubuntu" --groups "/TestGroup","/ProjectX","/ProjectY" Results in: Or via the VirtualBox Manager, you can drag VMs while pressing the Alt key (Mac) or Ctrl (other platforms). Nested Groups Just like you can drag VMs around in the VirtualBox Manager, you can also drag whole groups around. And dropping a group within a group creates a nested group. Via the command-line, nested groups are specified using a path-like syntax, like this: VBoxManage modifyvm "Ubuntu" --groups "/TestGroup/Linux" ...which creates a sub-group and puts the VM in it. Navigating Groups In the VirtualBox Manager, Groups can be collapsed and expanded by clicking on the carat to the left in the Group Header. But you can also Enter and Leave groups too, either by using the right-arrow/left-arrow keys, or by clicking on the carat on the right hand side of the Group Header, like this: . ..leading to a view of just the Group contents. You can Leave or return to the parent in the same way. Don't worry if you are imprecise with your clicking, you can use a double click on the entire right half of the Group Header to Enter a group, and the left half to Leave a group. Double-clicking on the left half when you're at the top will roll-up or collapse the group. Group Operations The real power of Groups is not simply in arranging them prettily in the Manager. Rather it is about performing collective operations on them, once you have grouped them appropriately. For example, let's say that you are working on a project (Project X) where you have a solution stack of: Database VM, Middleware/App VM, and a couple of client VMs which you use to test your app. With VM Groups you can start the whole stack with one operation. Select the Group Header, and choose Start: The full list of operations that may be performed on Groups are: Start Starts from any state (boot or resume) Start VMs in headless mode (hold Shift while starting) Pause Reset Close Save state Send Shutdown signal Poweroff Discard saved state Show in filesystem Sort Conclusion Hopefully we've shown that the introduction of VM Groups not only makes Oracle VM VirtualBox pretty, but pretty powerful too. - FB

Read the article

Scrambling Sensitive Data in E-Business Suite Release 12 Cloned Environments

- by Elke Phelps (Oracle Development)

Securing the Oracle E-Business Suite includes protecting the underlying E-Business data in production and non-production databases. While steps can be taken to provide a secure configuration to limit EBS access, a better approach to protecting non-production data is simply to scramble (mask) the data in the non-production copy. You can use the Oracle Data Masking Pack with Oracle Enterprise Manager today to scramble sensitive data in cloned environments. Due to data dependencies, scrambling E-Business Suite data is not a trivial task. The data needs to be scrubbed in such a way that allows the application to continue to function. Using the Data Masking Pack in E-Business Suite environments is now easier with the release of new set of templates for E-Business Suite databases: Oracle E-Business Suite Release 12.1.3 Template for Data Masking Pack (Patch13898999) This template works with the Oracle Data Masking Pack and Oracle Enterprise Manager to obscure sensitive E-Business Suite information that is copied from production to non-production environments. Is there a charge for this? Yes. You must purchase licenses for Oracle Enterprise Manager and the Oracle Data Masking Pack plug-in. The Oracle E-Business Suite 12.1.3 Template for the Data Masking Pack is included with the Oracle Data Masking Pack license. You can contact your Oracle account manager for more details about licensing. What does data masking do in E-Business Suite environments? Application data masking does the following: De-identify the data: Scramble identifiers of individuals, also known as personally identifiable information or PII. Examples include information such as name, account, address, location, and driver's license number. Mask sensitive data: Mask data that, if associated with personally identifiable information (PII), would cause privacy concerns. Examples include compensation, health and employment information. Maintain data validity: Provide a fully functional application. How can EBS customers use data masking? The Oracle E-Business Suite Template for Data Masking Pack can be used in situations where confidential or regulated data needs to be shared with other non-production users who need access to some of the original data, but not necessarily every table. Examples of non-production users include internal application developers or external business partners such as offshore testing companies, suppliers or customers. The Oracle E-Business Suite Template for Data Masking Pack is applied to a non-production environment with the Enterprise Manager Grid Control Data Masking Pack. When applied, the Oracle E-Business Suite Template for Data Masking Pack will create an irreversibly scrambled version of your production database for development and testing. References For additional information on the Oracle E-Business Suite Template for Data Masking Pack please refer to the following: Masking Sensitive Data for Non-production Use in the Oracle Enterprise Manager Concepts 11g Using the Oracle E-Business Suite, Release 12.1.3 Template for the Data Masking Pack, Note 1437485.1 Related Articles Webcast Replay Available: E-Business Suite Data Protection Oracle E-Business Suite Plug-in 4.0 Released for OEM 11g (11.1.0.1)

Read the article

Monitor and Control Memory Usage in Google Chrome

- by Asian Angel

Do you want to know just how much memory Google Chrome and any installed extensions are using at a given moment? With just a few clicks you can see just what is going on under the hood of your browser. How Much Memory are the Extensions Using? Here is our test browser with a new tab and the Extensions Page open, five enabled extensions, and one disabled at the moment. You can access Chrome’s Task Manager using the Page Menu, going to Developer, and selecting Task manager… Or by right clicking on the Tab Bar and selecting Task manager. There is also a keyboard shortcut (Shift + Esc) available for the “keyboard ninjas”. Sitting idle as shown above here are the stats for our test browser. All of the extensions are sitting there eating memory even though some of them are not available/active for use on our new tab and Extensions Page. Not so good… If the default layout is not to your liking then you can easily modify the information that is available by right clicking and adding/removing extra columns as desired. For our example we added Shared Memory & Private Memory. Using the about:memory Page to View Memory Usage Want even more detail? Type about:memory into the Address Bar and press Enter. Note: You can also access this page by clicking on the Stats for nerds Link in the lower left corner of the Task Manager Window. Focusing on the four distinct areas you can see the exact version of Chrome that is currently installed on your system… View the Memory & Virtual Memory statistics for Chrome… Note: If you have other browsers running at the same time you can view statistics for them here too. See a list of the Processes currently running… And the Memory & Virtual Memory statistics for those processes. The Difference with the Extensions Disabled Just for fun we decided to disable all of the extension in our test browser… The Task Manager Window is looking rather empty now but the memory consumption has definitely seen an improvement. Comparing Memory Usage for Two Extensions with Similar Functions For our next step we decided to compare the memory usage for two extensions with similar functionality. This can be helpful if you are wanting to keep memory consumption trimmed down as much as possible when deciding between similar extensions. First up was Speed Dial”(see our review here). The stats for Speed Dial…quite a change from what was shown above (~3,000 – 6,000 K). Next up was Incredible StartPage (see our review here). Surprisingly both were nearly identical in the amount of memory being used. Purging Memory Perhaps you like the idea of being able to “purge” some of that excess memory consumption. With a simple command switch modification to Chrome’s shortcut(s) you can add a Purge Memory Button to the Task Manager Window as shown below. Notice the amount of memory being consumed at the moment… Note: The tutorial for adding the command switch can be found here. One quick click and there is a noticeable drop in memory consumption. Conclusion We hope that our examples here will prove useful to you in managing the memory consumption in your own Google Chrome installation. If you have a computer with limited resources every little bit definitely helps out. Similar Articles Productive Geek Tips Stupid Geek Tricks: Compare Your Browser’s Memory Usage with Google ChromeMonitor CPU, Memory, and Disk IO In Windows 7 with Taskbar MetersFix for Firefox memory leak on WindowsHow to Purge Memory in Google ChromeHow to Make Google Chrome Your Default Browser TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals Video Toolbox is a Superb Online Video Editor Fun with 47 charts and graphs

Read the article

UEFI Dual-Boot - Ubuntu 12.04.3 + Windows 8.1 (One GPT HDD)

- by swafbrother

UEFI Dual-Boot - Ubuntu 12.04.3 + Windows 8.1 (One GPT HDD) Hello, I'm having trouble setting up a dual-boot (Ubuntu 12.04 LTS and Windows 8.1) in my ASUS K55VM laptop's hard drive disk (500 GB). I was mostly following tutorials for doing this, but at some point something has gone wrong. Up to now, I have followed these steps: I formatted my HDD into GPT. I clean-installed Windows 8.1. I didn't prevent Windows from choosing the partitions to use and it created these partitions: A Recovery partition (sda1). An EFI System Partition (sda2). A Microsoft Reserved Partition (sda3). A Windows Data Partition or C drive (sda4). I reduced the Windows Data Partition via Windows' Disk Management. I made a bootable USB Stick with Ubuntu 12.04 LTS from ISO, using Universal USB Installer. I created these partitions for Ubuntu: A Boot partition, mounted at /boot (sda5). A Root partition, mounted at / (sda6). A Swap partition (sda7). In Device for boot loader installation I chose: /dev/sda. Then, when I rebooted, it went straight into Ubuntu. So I installed Boot-Repair, and clicked on Recommended Repair. It automatically did its job without asking for anything. I rebooted and Grub showed up, with a lot of options. At this point I had a decent dual-boot setup; Ubuntu and both Windows entries worked fine: Ubuntu. Windows Boot UEFI Loader. Windows UEFI bkpbootmgfw.efi. I executed this command: sudo grub-install --force /dev/sda5. Then I tried to make Windows 8.1's Boot Manager the main boot manager, so that I could choose which OS to boot into from a menu. I downloaded EasyBCD on Windows. It showed 2 Ubuntu entries and 1 Windows entry. I went into BCD Deployment tab and clicked on Write MBR. At this point, I went into BIOS and made Windows Boot Manager the first boot option. When I rebooted, I got a black screen with the message efidisk read error, and then (I guess) it switched to the next boot option, which is Ubuntu, resulting in Grub showing up. From Grub, Ubuntu entry is working and so are both Windows entries. If I choose Ubuntu, it normally boots into Ubuntu. But if I choose Windows, it goes into Windows' boot manager. In Windows' boot manager, a menu shows up: Ubuntu. Ubuntu. Windows 8.1. If I choose Windows, it boots into Windows without any problem. If I choose Ubuntu, it boots into Grub (back to step 14). Here's my BootInfo Summary: http://paste.ubuntu.com/6698171/ Windows Boot Manager is clearly not working as expected; I can't directly boot into it and I can't boot into it from BIOS either (efidisk read error again). If I want to boot into Windows I need to boot into Grub first, which is the opposite of what I wanted. I need help at this point. What is the best thing I can do? Is there a more reliable and/or simpler way of acomplishing a satisfying dual-boot for this situation? Can someone provide a way for going back to step 8, where I had a more efficient dual-boot setup? If only I could undo what I did with Easy BCD and skip Windows' Boot Menu... Can someone provide a way to fix this mess? Thanks in advance and sorry for the length of this, I wanted to be exhaustive.

Read the article

October 2013 Fusion Middleware (FMW) Proactive Patches released

- by Irina

We are glad to announce that the following Fusion Middleware (FMW) Proactive patches were released on October 15, 2013.Bundle PatchesBundle patches are collections of controlled, well tested critical bug fixes for a specific product which may include security contents and occasionally minor enhancements. These are cumulative in nature meaning the latest bundle patch in a particular series includes the contents of the previous bundle patches released. A suite bundle patch is an aggregation of multiple product bundle patches that are part of a product suite. Oracle Identity Management Suite Bundle Patch 11.1.1.5.5 consisting of Oracle Identity Manager (OIM) 11.1.1.5.9 bundle patch Oracle Access Manager (OAM) 11.1.1.5.6 bundle patch. Oracle Adaptive Access Manager (OAAM) 11.1.1.5.2 bundle patch. Oracle Entitlement Server (OES) 11.1.1.5.4 bundle patch. Oracle Identity Management Suite Bundle Patch 11.1.2.0.4 consisting of Oracle Access Manager (OAM) 11.1.2.0.4 bundle patch. Oracle Adaptive Access Manager (OAAM) 11.1.2.0.2 bundle patch. Oracle Entitlement Server (OES) 11.1.2.0.2 bundle patch. Oracle Identity Analytics (OIA ) 11.1.1.5.6 bundle patch. Oracle GlassFish Server (OGFS) 2.1.1.22, 3.0.1.8 and 3.1.2.7 bundle patches. Oracle iPlanet Web Server (OiWS) 7.0.18 bundle patch Oracle SOA Suite (SOA) 11.1.1.7.1 bundle patch Oracle WebCenter Portal (WCP) 11.1.1.8.1 bundle patch Sun Role Manager (SRM) 4.1.7 and 5.0.3.2 bundle patches. Patch Set Updates (PSU)Patch Set Updates (PSU) are collections of well controlled, well tested critical bug fixes for a specific product that have been proven in customer environments. PSUs may include security contents but no enhancements are included. These are cumulative in nature meaning the latest PSU in a particular series includes the contents of the previous PSUs released. Oracle Exalogic 2.0.3.0.4 Physical Linux x86-64 and 2.0.4.0.4 Physical Solaris x86-64 PSUs. Oracle WebLogic Server 10.3.6.0.6 and 12.1.1.0.6 PSUs. Critical Patch Update (CPU)The Critical Patch Update program is Oracle's quarterly release of security fixes.The following additional patches were released as part of Oracle's Critical Patch Update program: Oracle JDeveloper 11.1.2.3.0, 11.1.2.4.0 and 12.1.2.0.0 Oracle Outside In Technology 8.4.0 and 8.4.1 Oracle Portal 11.1.1.6.0 Oracle Security Service 11.1.1.6.0, 11.1.1.7.0 and 12.1.2.0.0 Oracle WebCache 11.1.1.6.0 and 11.1.1.7.0 Oracle WebCenter Content 10.1.3.5.1, 11.1.1.6.0, 11.1.1.7.0 and 11.1.1.8.0 Oracle WebServices 10.1.3.5.0 and 11.1.1.6.0 For more information: Master Notes on Fusion Middleware Proactive Patching PSU and CPU October 2013 Availability Document Critical Patch Update Advisory - October 2013

Read the article

October 2013 FMW Proactive Patches Released

- by mustafakaya

The following Fusion Middleware (FMW) Proactive patches were released on October 15, 2013. Bundle Patches : Bundle patches are collections of controlled, well tested critical bug fixes for a specific product which may include security contents and occasionally minor enhancements. These are cumulative in nature meaning the latest bundle patch in a particular series includes the contents of the previous bundle patches released. A suite bundle patch is an aggregation of multiple product bundle patches that are part of a product suite. Oracle Identity Management Suite Bundle Patch 11.1.1.5.5 consisting of Oracle Identity Manager (OIM) 11.1.1.5.9 bundle patch Oracle Access Manager (OAM) 11.1.1.5.6 bundle patch. Oracle Adaptive Access Manager (OAAM) 11.1.1.5.2 bundle patch. Oracle Entitlement Server (OES) 11.1.1.5.4 bundle patch. Oracle Identity Management Suite Bundle Patch 11.1.2.0.4 consisting of Oracle Access Manager (OAM) 11.1.2.0.4 bundle patch. Oracle Adaptive Access Manager (OAAM) 11.1.2.0.2 bundle patch. Oracle Entitlement Server (OES) 11.1.2.0.2 bundle patch. Oracle Identity Analytics (OIA ) 11.1.1.5.6 bundle patch. Oracle GlassFish Server (OGFS) 2.1.1.22, 3.0.1.8 and 3.1.2.7 bundle patches. Oracle iPlanet Web Server (OiWS) 7.0.18 bundle patch Oracle SOA Suite (SOA) 11.1.1.7.1 bundle patch Oracle WebCenter Portal (WCP) 11.1.1.8.1 bundle patch Sun Role Manager (SRM) 4.1.7 and 5.0.3.2 bundle patches. Patch Set Updates (PSU) Patch Set Updates (PSU) are collections of well controlled, well tested critical bug fixes for a specific product that have been proven in customer environments. PSUs may include security contents but no enhancements are included. These are cumulative in nature meaning the latest PSU in a particular series includes the contents of the previous PSUs released. Oracle Exalogic 2.0.3.0.4 Physical Linux x86-64 and 2.0.4.0.4 Physical Solaris x86-64 PSUs. Oracle WebLogic Server 10.3.6.0.6 and 12.1.1.0.6 PSUs. Critical Patch Update (CPU) : The Critical Patch Update program is Oracle's quarterly release of security fixes. The following additional patches were released as part of Oracle's Critical Patch Update program: Oracle JDeveloper 11.1.2.3.0, 11.1.2.4.0 and 12.1.2.0.0 Oracle Outside In Technology 8.4.0 and 8.4.1 Oracle Portal 11.1.1.6.0 Oracle Security Service 11.1.1.6.0, 11.1.1.7.0 and 12.1.2.0.0 Oracle WebCache 11.1.1.6.0 and 11.1.1.7.0 Oracle WebCenter Content 10.1.3.5.1, 11.1.1.6.0, 11.1.1.7.0 and 11.1.1.8.0 Oracle WebServices 10.1.3.5.0 and 11.1.1.6.0 For more information; Master Notes on Fusion Middleware Proactive Patching. PSU and CPU October 2013 Availability Document Critical Patch Update Advisory - October 2013

Read the article

October 2013 Fusion Middleware (FMW) Proactive Patches released

- by PCat

We are glad to announce that the following Fusion Middleware (FMW) Proactive patches were released on October 15, 2013.Bundle PatchesBundle patches are collections of controlled, well tested critical bug fixes for a specific product which may include security contents and occasionally minor enhancements. These are cumulative in nature meaning the latest bundle patch in a particular series includes the contents of the previous bundle patches released. A suite bundle patch is an aggregation of multiple product bundle patches that are part of a product suite. Oracle Identity Management Suite Bundle Patch 11.1.1.5.5 consisting of Oracle Identity Manager (OIM) 11.1.1.5.9 bundle patch Oracle Access Manager (OAM) 11.1.1.5.6 bundle patch. Oracle Adaptive Access Manager (OAAM) 11.1.1.5.2 bundle patch. Oracle Entitlement Server (OES) 11.1.1.5.4 bundle patch. Oracle Identity Management Suite Bundle Patch 11.1.2.0.4 consisting of Oracle Access Manager (OAM) 11.1.2.0.4 bundle patch. Oracle Adaptive Access Manager (OAAM) 11.1.2.0.2 bundle patch. Oracle Entitlement Server (OES) 11.1.2.0.2 bundle patch. Oracle Identity Analytics (OIA ) 11.1.1.5.6 bundle patch. Oracle GlassFish Server (OGFS) 2.1.1.22, 3.0.1.8 and 3.1.2.7 bundle patches. Oracle iPlanet Web Server (OiWS) 7.0.18 bundle patch Oracle SOA Suite (SOA) 11.1.1.7.1 bundle patch Oracle WebCenter Portal (WCP) 11.1.1.8.1 bundle patch Sun Role Manager (SRM) 4.1.7 and 5.0.3.2 bundle patches. Patch Set Updates (PSU)Patch Set Updates (PSU) are collections of well controlled, well tested critical bug fixes for a specific product that have been proven in customer environments. PSUs may include security contents but no enhancements are included. These are cumulative in nature meaning the latest PSU in a particular series includes the contents of the previous PSUs released. Oracle Exalogic 2.0.3.0.4 Physical Linux x86-64 and 2.0.4.0.4 Physical Solaris x86-64 PSUs. Oracle WebLogic Server 10.3.6.0.6 and 12.1.1.0.6 PSUs. Critical Patch Update (CPU)The Critical Patch Update program is Oracle's quarterly release of security fixes.The following additional patches were released as part of Oracle's Critical Patch Update program: Oracle JDeveloper 11.1.2.3.0, 11.1.2.4.0 and 12.1.2.0.0 Oracle Outside In Technology 8.4.0 and 8.4.1 Oracle Portal 11.1.1.6.0 Oracle Security Service 11.1.1.6.0, 11.1.1.7.0 and 12.1.2.0.0 Oracle WebCache 11.1.1.6.0 and 11.1.1.7.0 Oracle WebCenter Content 10.1.3.5.1, 11.1.1.6.0, 11.1.1.7.0 and 11.1.1.8.0 Oracle WebServices 10.1.3.5.0 and 11.1.1.6.0 For more information: Master Notes on Fusion Middleware Proactive Patching PSU and CPU October 2013 Availability Document Critical Patch Update Advisory - October 2013

Read the article

Codeigniter: Using URIs with forms

- by Kevin Brown

I'm using URIs to direct a function in a library: $id = $this->CI->session->userdata('id'); $URI = $this->CI->uri->uri_string(); $new = "new"; if(strpos($URI, $new) === FALSE){ $method = "update"; } elseif(strpos($URI, $new) !== FALSE){ $method = "create"; } So I have two if statements directing what information to if ($method === 'update') { // Modify form, first load $this->CI->db->from('be_survey'); $this->CI->db->where('user_id' , $id); $survey = $this->CI->db->get(); $user = array_merge($user->row_array(),$survey->row_array()); $this->CI->validation->set_default_value($user); // Display page $data['user'] = $user; } $this->CI->validation->set_rules($rules); if ( $this->CI->validation->run() === FALSE ) { // Output any errors $this->CI->validation->output_errors(); } else { // Submit form $this->_submit($method); } Submit function: function _submit($method) { //Submit and Update for current User $id = $this->CI->session->userdata('id'); $this->CI->db->select('users.id, users.username, users.email, profiles.firstname, profiles.manager_id'); $this->CI->db->from('be_users' . " users"); $this->CI->db->join('be_user_profiles' . " profiles",'users.id=profiles.user_id'); $this->CI->db->having('id', $id); $email_data['user'] = $this->CI->db->get(); $email_data['user'] = $email_data['user']->row(); $manager_id = $email_data['user']->manager_id; $this->CI->db->select('firstname','email')->from('be_user_profiles')->where('user_id', $manager_id); $email_data['manager'] = $this->CI->db->get(); $email_data['manager'] = $email_data['manager']->row(); // Fetch what they entered in the form for($i=1;$i<18;$i++){ $survey["a_".$i]= $this->CI->input->post('a_'.$i); } for($i=1;$i<15;$i++){ $survey["b_".$i]= $this->CI->input->post('b_'.$i); } for($i=1;$i<12;$i++){ $survey["c_".$i]= $this->CI->input->post('c_'.$i); } $profile['firstname'] = $this->CI->input->post('firstname'); $profile['lastname'] = $this->CI->input->post('lastname'); $profile['test_date'] = date ("Y-m-d H:i:s"); $profile['company_name'] = $this->CI->input->post('company_name'); $profile['company_address'] = $this->CI->input->post('company_address'); $profile['company_city'] = $this->CI->input->post('company_city'); $profile['company_phone'] = $this->CI->input->post('company_phone'); $profile['company_state'] = $this->CI->input->post('company_state'); $profile['company_zip'] = $this->CI->input->post('company_zip'); $profile['job_title'] = $this->CI->input->post('job_title'); $profile['job_type'] = $this->CI->input->post('job_type'); $profile['job_time'] = $this->CI->input->post('job_time'); $profile['department'] = $this->CI->input->post('department'); $profile['vision'] = $this->CI->input->post('vision'); $profile['height'] = $this->CI->input->post('height'); $profile['weight'] = $this->CI->input->post('weight'); $profile['hand_dominance'] = $this->CI->input->post('hand_dominance'); $profile['areas_of_fatigue'] = $this->CI->input->post('areas_of_fatigue'); $profile['job_description'] = $this->CI->input->post('job_description'); $profile['injury_review'] = $this->CI->input->post('injury_review'); $profile['job_positive'] = $this->CI->input->post('job_positive'); $profile['risk_factors'] = $this->CI->input->post('risk_factors'); $profile['job_improvement_short'] = $this->CI->input->post('job_improvement_short'); $profile['job_improvement_long'] = $this->CI->input->post('job_improvement_long'); if ($method == "update") { //Begin db transmission $this->CI->db->trans_begin(); $this->CI->home_model->update('Survey',$survey, array('user_id' => $id)); $this->CI->db->update('be_user_profiles',$profile, array('user_id' => $id)); if ($this->CI->db->trans_status() === FALSE) { flashMsg('error','There was a problem entering your test! Please contact an administrator.'); redirect('survey','location'); } else { //Get credits of user and subtract 1 $this->CI->db->set('credits', 'credits -1', FALSE); $this->CI->db->update('be_user_profiles',$profile, array('user_id' => $manager_id)); //Mark the form completed. $this->CI->db->set('test_complete', '1'); $this->CI->db->where('user_id', $id)->update('be_user_profiles'); // Stuff worked... $this->CI->db->trans_commit(); //Get Manager Information $this->CI->db->select('users.id, users.username, users.email, profiles.firstname'); $this->CI->db->from('be_users' . " users"); $this->CI->db->join('be_user_profiles' . " profiles",'users.id=profiles.user_id'); $this->CI->db->having('id', $email_data['user']->manager_id); $email_data['manager'] = $this->CI->db->get(); $email_data['manager'] = $email_data['manager']->row(); //Email User $this->CI->load->library('User_email'); $data_user = array( 'firstname'=>$email_data['user']->firstname, 'email'=> $email_data['user']->email, 'user_completed'=>$email_data['user']->firstname, 'site_name'=>$this->CI->preference->item('site_name'), 'site_url'=>base_url() ); //Email Manager $data_manager = array( 'firstname'=>$email_data['manager']->firstname, 'email'=> $email_data['manager']->email, 'user_completed'=>$email_data['user']->firstname, 'site_name'=>$this->CI->preference->item('site_name'), 'site_url'=>base_url() ); $this->CI->user_email->send($email_data['manager']->email,'Completed the Assessment Tool','public/email_manager_complete',$data_manager); $this->CI->user_email->send($email_data['user']->email,'Completed the Assessment Tool','public/email_user_complete',$data_user); flashMsg('success','You finished the assessment successfully!'); redirect('home','location'); } } //Create New User elseif ($method == "create") { // Build $profile['user_id'] = $id; $profile['manager_id'] = $manager_id; $profile['test_complete'] = '1'; $survey['user_id'] = $id; $this->CI->db->trans_begin(); // Add user_profile details to DB $this->CI->db->insert('be_user_profiles',$profile); $this->CI->db->insert('be_survey',$survey); if ($this->CI->db->trans_status() === FALSE) { // Registration failed $this->CI->db->trans_rollback(); flashMsg('error',$this->CI->lang->line('userlib_registration_failed')); redirect('auth/register','location'); } else { // User registered $this->CI->db->trans_commit(); flashMsg('success',$this->CI->lang->line('userlib_registration_success')); redirect($this->CI->config->item('userlib_action_register'),'location'); } } } The submit function is similar, updating the db if $method == "update", and inserting if the method == "create". The problem is, when the form is submitted, it doesn't take into account the url b/c the form submits to the function "survey", which passes data to the lib function, so things are always updated, never created. *How can I pass $method to the _submit() function correctly?!*

Read the article

Inserting THEAD element into embedded HTML using jQuery

- by robalot

I'm trying to use jQuery to insert HTML into a table element. I've been messing variations of the selector (below) with no luck. Can someone help me? My Selector: $j('#ctl00_body_gridData_dom').children('table:first').append("<thead><tr><td colspan='6'> </td><td align='center' colspan='7'>EM SPECS</td><td align='center' colspan='7'>FISH</td><td colspan='11'> </td></tr></thead>"); Here's what I am trying to do... I want to insert this: <thead> <tr> <td colspan="6">   </td> <td align="center" colspan="7"> EM SPECS </td> <td align="center" colspan="7"> FISH </td> <td colspan="11">   </td> </tr> </thead> The sample below is what I want the end result to look like... So It Looks Like This: Jquery Event Pool <table id="ctl00_body_gridData" style="width: 2000px; -moz-user-select: none;" border="1" cellpadding="0" cellspacing="0"> <tbody> <tr> <td id="ctl00_body_gridData_dom" class="GridData" style="vertical-align: top; height: 245px;" valign="top"> <table style="width: 100%;" border="0" cellpadding="0" cellspacing="0"> <thead> <tr> <td colspan="6">   </td> <td align="center" colspan="7"> EM SPECS </td> <td align="center" colspan="7"> FISH </td> <td colspan="11">   </td> </tr> </thead> <tbody> <tr id="ctl00_body_gridData_top_head" class="headerlineGrid"> <td width="16"> <div style="width: 16px;"></div> </td> <td onclick="ctl00_body_gridData.ClickHandler(event,this,4,0)" ondblclick="ctl00_body_gridData.DblClickHandler(event,null,4,0)" onmousemove="ctl00_body_gridData.MoveHandler(event,this,0,0)" onmouseover="ctl00_body_gridData.OverHandler(event,this,0)" onmouseout="ctl00_body_gridData.OutHandler(event,this,0)" onmousedown="ctl00_body_gridData.DownHandler(event,this,4,0)" onmouseup="ctl00_body_gridData.UpHandler(event,this,4,0)" style="width: 89px;" class="HeadingCell" align="center"> <div style="text-align: center; overflow: hidden; width: 89px;"> <table width="100%" border="0" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="white-space: nowrap; text-align: center;" class="HeadingCellText" align="center"> Work<br>Package</td> </tr> </tbody> </table> </div> </td> <td onclick="ctl00_body_gridData.ClickHandler(event,this,6,0)" ondblclick="ctl00_body_gridData.DblClickHandler(event,null,6,0)" onmousemove="ctl00_body_gridData.MoveHandler(event,this,1,0)" onmouseover="ctl00_body_gridData.OverHandler(event,this,0)" onmouseout="ctl00_body_gridData.OutHandler(event,this,0)" onmousedown="ctl00_body_gridData.DownHandler(event,this,6,0)" onmouseup="ctl00_body_gridData.UpHandler(event,this,6,0)" style="width: 62px;" class="HeadingCell" align="center"> <div style="text-align: center; overflow: hidden; width: 62px;"> <table width="100%" border="0" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="white-space: nowrap; text-align: center;" class="HeadingCellText" align="center"> Work<br>Order</td> </tr> </tbody> </table> </div> </td> <td onclick="ctl00_body_gridData.ClickHandler(event,this,9,0)" ondblclick="ctl00_body_gridData.DblClickHandler(event,null,9,0)" onmousemove="ctl00_body_gridData.MoveHandler(event,this,2,0)" onmouseover="ctl00_body_gridData.OverHandler(event,this,0)" onmouseout="ctl00_body_gridData.OutHandler(event,this,0)" onmousedown="ctl00_body_gridData.DownHandler(event,this,9,0)" onmouseup="ctl00_body_gridData.UpHandler(event,this,9,0)" style="width: 66px;" class="HeadingCell" align="center"> <div style="text-align: center; overflow: hidden; width: 66px;"> <table width="100%" border="0" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="white-space: nowrap; text-align: center;" class="HeadingCellText" align="center"> FCR<br>Group</td> </tr> </tbody> </table> </div> </td> <td onclick="ctl00_body_gridData.ClickHandler(event,this,12,0)" ondblclick="ctl00_body_gridData.DblClickHandler(event,null,12,0)" onmousemove="ctl00_body_gridData.MoveHandler(event,this,3,0)" onmouseover="ctl00_body_gridData.OverHandler(event,this,0)" onmouseout="ctl00_body_gridData.OutHandler(event,this,0)" onmousedown="ctl00_body_gridData.DownHandler(event,this,12,0)" onmouseup="ctl00_body_gridData.UpHandler(event,this,12,0)" style="width: 105px;" class="HeadingCell" align="center"> <div style="text-align: center; overflow: hidden; width: 105px;"> <table width="100%" border="0" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="white-space: nowrap; text-align: center;" class="HeadingCellText" align="center">Contractor</td> </tr> </tbody> </table> </div> </td> <td onclick="ctl00_body_gridData.ClickHandler(event,this,15,0)" ondblclick="ctl00_body_gridData.DblClickHandler(event,null,15,0)" onmousemove="ctl00_body_gridData.MoveHandler(event,this,4,0)" onmouseover="ctl00_body_gridData.OverHandler(event,this,0)" onmouseout="ctl00_body_gridData.OutHandler(event,this,0)" onmousedown="ctl00_body_gridData.DownHandler(event,this,15,0)" onmouseup="ctl00_body_gridData.UpHandler(event,this,15,0)" style="width: 159px;" class="HeadingCell" align="center"> <div style="text-align: center; overflow: hidden; width: 159px;"> <table width="100%" border="0" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="white-space: nowrap; text-align: center;" class="HeadingCellText" align="center"> Capital/Expense<br>Group</td> </tr> </tbody> </table> </div> </td> <td onclick="ctl00_body_gridData.ClickHandler(event,this,19,0)" ondblclick="ctl00_body_gridData.DblClickHandler(event,null,19,0)" onmousemove="ctl00_body_gridData.MoveHandler(event,this,5,0)" onmouseover="ctl00_body_gridData.OverHandler(event,this,0)" onmouseout="ctl00_body_gridData.OutHandler(event,this,0)" onmousedown="ctl00_body_gridData.DownHandler(event,this,19,0)" onmouseup="ctl00_body_gridData.UpHandler(event,this,19,0)" style="width: 99px;" class="HeadingCell" align="center"> <div style="text-align: center; overflow: hidden; width: 99px;"> <table width="100%" border="0" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="white-space: nowrap; text-align: center;" class="HeadingCellText" align="center">Cost Type</td> </tr> </tbody> </table> </div> </td> <td onclick="ctl00_body_gridData.ClickHandler(event,this,20,0)" ondblclick="ctl00_body_gridData.DblClickHandler(event,null,20,0)" onmousemove="ctl00_body_gridData.MoveHandler(event,this,6,0)" onmouseover="ctl00_body_gridData.OverHandler(event,this,0)" onmouseout="ctl00_body_gridData.OutHandler(event,this,0)" onmousedown="ctl00_body_gridData.DownHandler(event,this,20,0)" onmouseup="ctl00_body_gridData.UpHandler(event,this,20,0)" style="width: 81px;" class="HeadingCell" align="center"> <div style="text-align: center; overflow: hidden; width: 81px;"> <table width="100%" border="0" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="white-space: nowrap; text-align: center;" class="HeadingCellText" align="center"> Commit<br>Dollars</td> </tr> </tbody> </table> </div> </td> <td onclick="ctl00_body_gridData.ClickHandler(event,this,21,0)" ondblclick="ctl00_body_gridData.DblClickHandler(event,null,21,0)" onmousemove="ctl00_body_gridData.MoveHandler(event,this,7,0)" onmouseover="ctl00_body_gridData.OverHandler(event,this,0)" onmouseout="ctl00_body_gridData.OutHandler(event,this,0)" onmousedown="ctl00_body_gridData.DownHandler(event,this,21,0)" onmouseup="ctl00_body_gridData.UpHandler(event,this,21,0)" style="width: 81px;" class="HeadingCell" align="center"> <div style="text-align: center; overflow: hidden; width: 81px;"> <table width="100%" border="0" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="white-space: nowrap; text-align: center;" class="HeadingCellText" align="center"> Commit<br>Hours</td> </tr> </tbody> </table> </div> </td> <td onclick="ctl00_body_gridData.ClickHandler(event,this,22,0)" ondblclick="ctl00_body_gridData.DblClickHandler(event,null,22,0)" onmousemove="ctl00_body_gridData.MoveHandler(event,this,8,0)" onmouseover="ctl00_body_gridData.OverHandler(event,this,0)" onmouseout="ctl00_body_gridData.OutHandler(event,this,0)" onmousedown="ctl00_body_gridData.DownHandler(event,this,22,0)" onmouseup="ctl00_body_gridData.UpHandler(event,this,22,0)" style="width: 86px;" class="HeadingCell" align="center"> <div style="text-align: center; overflow: hidden; width: 86px;"> <table width="100%" border="0" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="white-space: nowrap; text-align: center;" class="HeadingCellText" align="center"> Commit<br>Quantity</td> </tr> </tbody> </table> </div> </td> <td onclick="ctl00_body_gridData.ClickHandler(event,this,23,0)" ondblclick="ctl00_body_gridData.DblClickHandler(event,null,23,0)" onmousemove="ctl00_body_gridData.MoveHandler(event,this,9,0)" onmouseover="ctl00_body_gridData.OverHandler(event,this,0)" onmouseout="ctl00_body_gridData.OutHandler(event,this,0)" onmousedown="ctl00_body_gridData.DownHandler(event,this,23,0)" onmouseup="ctl00_body_gridData.UpHandler(event,this,23,0)" style="width: 76px;" class="HeadingCell" align="center"> <div style="text-align: center; overflow: hidden; width: 76px;"> <table width="100%" border="0" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="white-space: nowrap; text-align: center;" class="HeadingCellText" align="center"> Control<br>Budget</td> </tr> </tbody> </table> </div> </td> <td onclick="ctl00_body_gridData.ClickHandler(event,this,24,0)" ondblclick="ctl00_body_gridData.DblClickHandler(event,null,24,0)" onmousemove="ctl00_body_gridData.MoveHandler(event,this,10,0)" onmouseover="ctl00_body_gridData.OverHandler(event,this,0)" onmouseout="ctl00_body_gridData.OutHandler(event,this,0)" onmousedown="ctl00_body_gridData.DownHandler(event,this,24,0)" onmouseup="ctl00_body_gridData.UpHandler(event,this,24,0)" style="width: 46px;" class="HeadingCell" align="center"> <div style="text-align: center; overflow: hidden; width: 46px;"> <table width="100%" border="0" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="white-space: nowrap; text-align: center;" class="HeadingCellText" align="center">FTC</td> </tr> </tbody> </table> </div> </td> <td onclick="ctl00_body_gridData.ClickHandler(event,this,25,0)" ondblclick="ctl00_body_gridData.DblClickHandler(event,null,25,0)" onmousemove="ctl00_body_gridData.MoveHandler(event,this,11,0)" onmouseover="ctl00_body_gridData.OverHandler(event,this,0)" onmouseout="ctl00_body_gridData.OutHandler(event,this,0)" onmousedown="ctl00_body_gridData.DownHandler(event,this,25,0)" onmouseup="ctl00_body_gridData.UpHandler(event,this,25,0)" style="width: 88px;" class="HeadingCell" align="center"> <div style="text-align: center; overflow: hidden; width: 88px;"> <table width="100%" border="0" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="white-space: nowrap; text-align: center;" class="HeadingCellText" align="center"> Total<br>Forecast</td> </tr> </tbody> </table> </div> </td> <td onclick="ctl00_body_gridData.ClickHandler(event,this,26,0)" ondblclick="ctl00_body_gridData.DblClickHandler(event,null,26,0)" onmousemove="ctl00_body_gridData.MoveHandler(event,this,12,0)" onmouseover="ctl00_body_gridData.OverHandler(event,this,0)" onmouseout="ctl00_body_gridData.OutHandler(event,this,0)" onmousedown="ctl00_body_gridData.DownHandler(event,this,26,0)" onmouseup="ctl00_body_gridData.UpHandler(event,this,26,0)" style="width: 50px;" class="HeadingCell" align="center"> <div style="text-align: center; overflow: hidden; width: 50px;"> <table width="100%" border="0" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="white-space: nowrap; text-align: center;" class="HeadingCellText" align="center"> Ctr<br>COB</td> </tr> </tbody> </table> </div> </td> <td onclick="ctl00_body_gridData.ClickHandler(event,this,27,0)" ondblclick="ctl00_body_gridData.DblClickHandler(event,null,27,0)" onmousemove="ctl00_body_gridData.MoveHandler(event,this,13,0)" onmouseover="ctl00_body_gridData.OverHandler(event,this,0)" onmouseout="ctl00_body_gridData.OutHandler(event,this,0)" onmousedown="ctl00_body_gridData.DownHandler(event,this,27,0)" onmouseup="ctl00_body_gridData.UpHandler(event,this,27,0)" style="width: 49px;" class="HeadingCell" align="center"> <div style="text-align: center; overflow: hidden; width: 49px;"> <table width="100%" border="0" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="white-space: nowrap; text-align: center;" class="HeadingCellText" align="center"> Ctr<br>CCB</td> </tr> </tbody> </table> </div> </td> <td onclick="ctl00_body_gridData.ClickHandler(event,this,28,0)" ondblclick="ctl00_body_gridData.DblClickHandler(event,null,28,0)" onmousemove="ctl00_body_gridData.MoveHandler(event,this,14,0)" onmouseover="ctl00_body_gridData.OverHandler(event,this,0)" onmouseout="ctl00_body_gridData.OutHandler(event,this,0)" onmousedown="ctl00_body_gridData.DownHandler(event,this,28,0)" onmouseup="ctl00_body_gridData.UpHandler(event,this,28,0)" style="width: 81px;" class="HeadingCell" align="center"> <div style="text-align: center; overflow: hidden; width: 81px;"> <table width="100%" border="0" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="white-space: nowrap; text-align: center;" class="HeadingCellText" align="center"> Ctr<br> Commit<br>$</td> </tr> </tbody> </table> </div> </td> <td onclick="ctl00_body_gridData.ClickHandler(event,this,29,0)" ondblclick="ctl00_body_gridData.DblClickHandler(event,null,29,0)" onmousemove="ctl00_body_gridData.MoveHandler(event,this,15,0)" onmouseover="ctl00_body_gridData.OverHandler(event,this,0)" onmouseout="ctl00_body_gridData.OutHandler(event,this,0)" onmousedown="ctl00_body_gridData.DownHandler(event,this,29,0)" onmouseup="ctl00_body_gridData.UpHandler(event,this,29,0)" style="width: 81px;" class="HeadingCell" align="center"> <div style="text-align: center; overflow: hidden; width: 81px;"> <table width="100%" border="0" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="white-space: nowrap; text-align: center;" class="HeadingCellText" align="center"> Ctr<br> Commit<br>Hours</td> </tr> </tbody> </table> </div> </td> <td onclick="ctl00_body_gridData.ClickHandler(event,this,30,0)" ondblclick="ctl00_body_gridData.DblClickHandler(event,null,30,0)" onmousemove="ctl00_body_gridData.MoveHandler(event,this,16,0)" onmouseover="ctl00_body_gridData.OverHandler(event,this,0)" onmouseout="ctl00_body_gridData.OutHandler(event,this,0)" onmousedown="ctl00_body_gridData.DownHandler(event,this,30,0)" onmouseup="ctl00_body_gridData.UpHandler(event,this,30,0)" style="width: 86px;" class="HeadingCell" align="center"> <div style="text-align: center; overflow: hidden; width: 86px;"> <table width="100%" border="0" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="white-space: nowrap; text-align: center;" class="HeadingCellText" align="center"> Ctr<br> Commit<br>Quantity</td> </tr> </tbody> </table> </div> </td> <td onclick="ctl00_body_gridData.ClickHandler(event,this,31,0)" ondblclick="ctl00_body_gridData.DblClickHandler(event,null,31,0)" onmousemove="ctl00_body_gridData.MoveHandler(event,this,17,0)" onmouseover="ctl00_body_gridData.OverHandler(event,this,0)" onmouseout="ctl00_body_gridData.OutHandler(event,this,0)" onmousedown="ctl00_body_gridData.DownHandler(event,this,31,0)" onmouseup="ctl00_body_gridData.UpHandler(event,this,31,0)" style="width: 95px;" class="HeadingCell" align="center"> <div style="text-align: center; overflow: hidden; width: 95px;"> <table width="100%" border="0" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="white-space: nowrap; text-align: center;" class="HeadingCellText" align="center"> Ctr<br>% Compl.</td> </tr> </tbody> </table> </div> </td> <td onclick="ctl00_body_gridData.ClickHandler(event,this,32,0)" ondblclick="ctl00_body_gridData.DblClickHandler(event,null,32,0)" onmousemove="ctl00_body_gridData.MoveHandler(event,this,18,0)" onmouseover="ctl00_body_gridData.OverHandler(event,this,0)" onmouseout="ctl00_body_gridData.OutHandler(event,this,0)" onmousedown="ctl00_body_gridData.DownHandler(event,this,32,0)" onmouseup="ctl00_body_gridData.UpHandler(event,this,32,0)" style="width: 105px;" class="HeadingCell" align="center"> <div style="text-align: center; overflow: hidden; width: 105px;"> <table width="100%" border="0" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="white-space: nowrap; text-align: center;" class="HeadingCellText" align="center"> Contractor<br>CFTC</td> </tr> </tbody> </table> </div> </td> </tr> <tr> <td id="ctl00_body_gridData_expcolgrp_0" width="16" align="center"></td> <td class="GroupHeading" colspan="20"> FCR<br>Group: Engineering</td> </tr> <tr> <td id="ctl00_body_gridData_expcolgrp_1" width="16" align="center"></td> <td class="GroupHeading" colspan="20"> FCR<br>Group: Pipe</td> </tr> <tr> <td id="ctl00_body_gridData_expcolgrp_2" width="16" align="center"></td> <td class="GroupHeading" colspan="20"> FCR<br>Group: Concrete</td> </tr> <tr> <td id="ctl00_body_gridData_expcolgrp_3" width="16" align="center"></td> <td class="GroupHeading" colspan="20"> FCR<br>Group: Insulation</td> </tr> <tr> <td id="ctl00_body_gridData_expcolgrp_4" width="16" align="center"></td> <td class="GroupHeading" colspan="20"> FCR<br>Group: Buildings</td> </tr> </tbody> </table> </td> </tr> </tbody> </table> </body> </html>

Read the article

DirectShow: Video-Preview and Image (with working code)

- by xsl

Questions / Issues If someone can recommend me a good free hosting site I can provide the whole project file. As mentioned in the text below the TakePicture() method is not working properly on the HTC HD 2 device. It would be nice if someone could look at the code below and tell me if it is right or wrong what I'm doing. Introduction I recently asked a question about displaying a video preview, taking camera image and rotating a video stream with DirectShow. The tricky thing about the topic is, that it's very hard to find good examples and the documentation and the framework itself is very hard to understand for someone who is new to windows programming and C++ in general. Nevertheless I managed to create a class that implements most of this features and probably works with most mobile devices. Probably because the DirectShow implementation depends a lot on the device itself. I could only test it with the HTC HD and HTC HD2, which are known as quite incompatible. HTC HD Working: Video preview, writing photo to file Not working: Set video resolution (CRASH), set photo resolution (LOW quality) HTC HD 2 Working: Set video resolution, set photo resolution Problematic: Video Preview rotated Not working: Writing photo to file To make it easier for others by providing a working example, I decided to share everything I have got so far below. I removed all of the error handling for the sake of simplicity. As far as documentation goes, I can recommend you to read the MSDN documentation, after that the code below is pretty straight forward. void Camera::Init() { CreateComObjects(); _captureGraphBuilder->SetFiltergraph(_filterGraph); InitializeVideoFilter(); InitializeStillImageFilter(); } Dipslay a video preview (working with any tested handheld): void Camera::DisplayVideoPreview(HWND windowHandle) { IVideoWindow *_vidWin; _filterGraph->QueryInterface(IID_IMediaControl,(void **) &_mediaControl); _filterGraph->QueryInterface(IID_IVideoWindow, (void **) &_vidWin); _videoCaptureFilter->QueryInterface(IID_IAMVideoControl, (void**) &_videoControl); _captureGraphBuilder->RenderStream(&PIN_CATEGORY_PREVIEW, &MEDIATYPE_Video, _videoCaptureFilter, NULL, NULL); CRect rect; long width, height; GetClientRect(windowHandle, &rect); _vidWin->put_Owner((OAHWND)windowHandle); _vidWin->put_WindowStyle(WS_CHILD | WS_CLIPSIBLINGS); _vidWin->get_Width(&width); _vidWin->get_Height(&height); height = rect.Height(); _vidWin->put_Height(height); _vidWin->put_Width(rect.Width()); _vidWin->SetWindowPosition(0,0, rect.Width(), height); _mediaControl->Run(); } HTC HD2: If set SetPhotoResolution() is called FindPin will return E_FAIL. If not, it will create a file full of null bytes. HTC HD: Works void Camera::TakePicture(WCHAR *fileName) { CComPtr<IFileSinkFilter> fileSink; CComPtr<IPin> stillPin; CComPtr<IUnknown> unknownCaptureFilter; CComPtr<IAMVideoControl> videoControl; _imageSinkFilter.QueryInterface(&fileSink); fileSink->SetFileName(fileName, NULL); _videoCaptureFilter.QueryInterface(&unknownCaptureFilter); _captureGraphBuilder->FindPin(unknownCaptureFilter, PINDIR_OUTPUT, &PIN_CATEGORY_STILL, &MEDIATYPE_Video, FALSE, 0, &stillPin); _videoCaptureFilter.QueryInterface(&videoControl); videoControl->SetMode(stillPin, VideoControlFlag_Trigger); } Set resolution: Works great on HTC HD2. HTC HD won't allow SetVideoResolution() and only offers one low resolution photo resolution: void Camera::SetVideoResolution(int width, int height) { SetResolution(true, width, height); } void Camera::SetPhotoResolution(int width, int height) { SetResolution(false, width, height); } void Camera::SetResolution(bool video, int width, int height) { IAMStreamConfig *config; config = NULL; if (video) { _captureGraphBuilder->FindInterface(&PIN_CATEGORY_PREVIEW, &MEDIATYPE_Video, _videoCaptureFilter, IID_IAMStreamConfig, (void**) &config); } else { _captureGraphBuilder->FindInterface(&PIN_CATEGORY_STILL, &MEDIATYPE_Video, _videoCaptureFilter, IID_IAMStreamConfig, (void**) &config); } int resolutions, size; VIDEO_STREAM_CONFIG_CAPS caps; config->GetNumberOfCapabilities(&resolutions, &size); for (int i = 0; i < resolutions; i++) { AM_MEDIA_TYPE *mediaType; if (config->GetStreamCaps(i, &mediaType, reinterpret_cast<BYTE*>(&caps)) == S_OK ) { int maxWidth = caps.MaxOutputSize.cx; int maxHeigth = caps.MaxOutputSize.cy; if(maxWidth == width && maxHeigth == height) { VIDEOINFOHEADER *info = reinterpret_cast<VIDEOINFOHEADER*>(mediaType->pbFormat); info->bmiHeader.biWidth = maxWidth; info->bmiHeader.biHeight = maxHeigth; info->bmiHeader.biSizeImage = DIBSIZE(info->bmiHeader); config->SetFormat(mediaType); DeleteMediaType(mediaType); break; } DeleteMediaType(mediaType); } } } Other methods used to build the filter graph and create the COM objects: void Camera::CreateComObjects() { CoInitialize(NULL); CoCreateInstance(CLSID_CaptureGraphBuilder, NULL, CLSCTX_INPROC_SERVER, IID_ICaptureGraphBuilder2, (void **) &_captureGraphBuilder); CoCreateInstance(CLSID_FilterGraph, NULL, CLSCTX_INPROC_SERVER, IID_IGraphBuilder, (void **) &_filterGraph); CoCreateInstance(CLSID_VideoCapture, NULL, CLSCTX_INPROC, IID_IBaseFilter, (void**) &_videoCaptureFilter); CoCreateInstance(CLSID_IMGSinkFilter, NULL, CLSCTX_INPROC, IID_IBaseFilter, (void**) &_imageSinkFilter); } void Camera::InitializeVideoFilter() { _videoCaptureFilter->QueryInterface(&_propertyBag); wchar_t deviceName[MAX_PATH] = L"\0"; GetDeviceName(deviceName); CComVariant comName = deviceName; CPropertyBag propertyBag; propertyBag.Write(L"VCapName", &comName); _propertyBag->Load(&propertyBag, NULL); _filterGraph->AddFilter(_videoCaptureFilter, L"Video Capture Filter Source"); } void Camera::InitializeStillImageFilter() { _filterGraph->AddFilter(_imageSinkFilter, L"Still image filter"); _captureGraphBuilder->RenderStream(&PIN_CATEGORY_STILL, &MEDIATYPE_Video, _videoCaptureFilter, NULL, _imageSinkFilter); } void Camera::GetDeviceName(WCHAR *deviceName) { HRESULT hr = S_OK; HANDLE handle = NULL; DEVMGR_DEVICE_INFORMATION di; GUID guidCamera = { 0xCB998A05, 0x122C, 0x4166, 0x84, 0x6A, 0x93, 0x3E, 0x4D, 0x7E, 0x3C, 0x86 }; di.dwSize = sizeof(di); handle = FindFirstDevice(DeviceSearchByGuid, &guidCamera, &di); StringCchCopy(deviceName, MAX_PATH, di.szLegacyName); } Full header file: #ifndef __CAMERA_H__ #define __CAMERA_H__ class Camera { public: void Init(); void DisplayVideoPreview(HWND windowHandle); void TakePicture(WCHAR *fileName); void SetVideoResolution(int width, int height); void SetPhotoResolution(int width, int height); private: CComPtr<ICaptureGraphBuilder2> _captureGraphBuilder; CComPtr<IGraphBuilder> _filterGraph; CComPtr<IBaseFilter> _videoCaptureFilter; CComPtr<IPersistPropertyBag> _propertyBag; CComPtr<IMediaControl> _mediaControl; CComPtr<IAMVideoControl> _videoControl; CComPtr<IBaseFilter> _imageSinkFilter; void GetDeviceName(WCHAR *deviceName); void InitializeVideoFilter(); void InitializeStillImageFilter(); void CreateComObjects(); void SetResolution(bool video, int width, int height); }; #endif

Read the article

buttonField clicking problem in blackberry

- by Master

hi when i am setting the BackGround image through VerticalField Manager. only one buttonField is gettin clicked ,other button field is not working. can i have the solution for it. please if not i want alternative which will position the buttonfield ,set by user. and i want a image as a background help me out. its urgent.. public GreetingsMainScreen() { homeBackgroundImage=Bitmap.getBitmapResource("com/greetings/Images/HomeBackgroundImage.jpg"); exitField=new ButtonField("Exit",ButtonField.CONSUME_CLICK); exitField.setChangeListener(this); greetField=new ButtonField("GREET",ButtonField.CONSUME_CLICK); greetField.setChangeListener(this); VerticalFieldManager manager = new VerticalFieldManager() { protected void sublayout(int width, int height) { width=fwidth; height=fHeight; super.sublayout(width,height); setPositionChild(greetField, width-232, height-150); setPositionChild(exitField, width-205, height-110); setExtent(width, height); } }; manager.setBackground(BackgroundFactory.createBitmapBackground(homeBackgroundImage)); manager.add(exitField); manager.add(greetField); add(manager); } public void fieldChanged(Field field, int context) { if(field == exitField) { Dialog.alert("Hi"); System.exit(0); } if(field == greetField) { System.exit(0); } } } Thanks alot

Read the article

Erroneous/Incorrect C2248 error using Visual Studio 2010

- by Dylan Bourque

I'm seeing what I believe to be an erroneous/incorrect compiler error using the Visual Studio 2010 compiler. I'm in the process of up-porting our codebase from Visual Studio 2005 and I ran across a construct that was building correctly before but now generates a C2248 compiler error. Obviously, the code snippet below has been generic-ized, but it is a compilable example of the scenario. The ObjectPtr<T> C++ template comes from our codebase and is the source of the error in question. What appears to be happening is that the compiler is generating a call to the copy constructor for ObjectPtr<T> when it shouldn't (see my comment block in the SomeContainer::Foo() method below). For this code construct, there is a public cast operator for SomeUsefulData * on ObjectPtr<SomeUsefulData> but it is not being chosen inside the true expression if the ?: operator. Instead, I get the two errors in the block quote below. Based on my knowledge of C++, this code should compile. Has anyone else seen this behavior? If not, can someone point me to a clarification of the compiler resolution rules that would explain why it's attempting to generate a copy of the object in this case? Thanks in advance, Dylan Bourque Visual Studio build output: c:\projects\objectptrtest\objectptrtest.cpp(177): error C2248: 'ObjectPtr::ObjectPtr' : cannot access private member declared in class 'ObjectPtr' with [ T=SomeUsefulData ] c:\projects\objectptrtest\objectptrtest.cpp(25) : see declaration of 'ObjectPtr::ObjectPtr' with [ T=SomeUsefulData ] c:\projects\objectptrtest\objectptrtest.cpp(177): error C2248: 'ObjectPtr::ObjectPtr' : cannot access private member declared in class 'ObjectPtr' with [ T=SomeUsefulData ] c:\projects\objectptrtest\objectptrtest.cpp(25) : see declaration of 'ObjectPtr::ObjectPtr' with [ T=SomeUsefulData ] Below is a minimal, compilable example of the scenario: #include <stdio.h> #include <tchar.h> template<class T> class ObjectPtr { public: ObjectPtr<T> (T* pObj = NULL, bool bShared = false) : m_pObject(pObj), m_bObjectShared(bShared) {} ~ObjectPtr<T> () { Detach(); } private: // private, unimplemented copy constructor and assignment operator // to guarantee that ObjectPtr<T> objects are not copied ObjectPtr<T> (const ObjectPtr<T>&); ObjectPtr<T>& operator = (const ObjectPtr<T>&); public: T * GetObject () { return m_pObject; } const T * GetObject () const { return m_pObject; } bool HasObject () const { return (GetObject()!=NULL); } bool IsObjectShared () const { return m_bObjectShared; } void ObjectShared (bool bShared) { m_bObjectShared = bShared; } bool IsNull () const { return !HasObject(); } void Attach (T* pObj, bool bShared = false) { Detach(); if (pObj != NULL) { m_pObject = pObj; m_bObjectShared = bShared; } } void Detach (T** ppObject = NULL) { if (ppObject != NULL) { *ppObject = m_pObject; m_pObject = NULL; m_bObjectShared = false; } else { if (HasObject()) { if (!IsObjectShared()) delete m_pObject; m_pObject = NULL; m_bObjectShared = false; } } } void Detach (bool bDeleteIfNotShared) { if (HasObject()) { if (bDeleteIfNotShared && !IsObjectShared()) delete m_pObject; m_pObject = NULL; m_bObjectShared = false; } } bool IsEqualTo (const T * pOther) const { return (GetObject() == pOther); } public: T * operator -> () { ASSERT(HasObject()); return m_pObject; } const T * operator -> () const { ASSERT(HasObject()); return m_pObject; } T & operator * () { ASSERT(HasObject()); return *m_pObject; } const T & operator * () const { ASSERT(HasObject()); return (const C &)(*m_pObject); } operator T * () { return m_pObject; } operator const T * () const { return m_pObject; } operator bool() const { return (m_pObject!=NULL); } ObjectPtr<T>& operator = (T * pObj) { Attach(pObj, false); return *this; } bool operator == (const T * pOther) const { return IsEqualTo(pOther); } bool operator == (T * pOther) const { return IsEqualTo(pOther); } bool operator != (const T * pOther) const { return !IsEqualTo(pOther); } bool operator != (T * pOther) const { return !IsEqualTo(pOther); } bool operator == (const ObjectPtr<T>& other) const { return IsEqualTo(other.GetObject()); } bool operator != (const ObjectPtr<T>& other) const { return !IsEqualTo(other.GetObject()); } bool operator == (int pv) const { return (pv==NULL)? IsNull() : (LPVOID(m_pObject)==LPVOID(pv)); } bool operator != (int pv) const { return !(*this == pv); } private: T * m_pObject; bool m_bObjectShared; }; // Some concrete type that holds useful data class SomeUsefulData { public: SomeUsefulData () {} ~SomeUsefulData () {} }; // Some concrete type that holds a heap-allocated instance of // SomeUsefulData class SomeContainer { public: SomeContainer (SomeUsefulData* pUsefulData) { m_pData = pUsefulData; } ~SomeContainer () { // nothing to do here } public: bool EvaluateSomeCondition () { // fake condition check to give us an expression // to use in ?: operator below return true; } SomeUsefulData* Foo () { // this usage of the ?: operator generates a C2248 // error b/c it's attempting to call the copy // constructor on ObjectPtr<T> return EvaluateSomeCondition() ? m_pData : NULL; /**********[ DISCUSSION ]********** The following equivalent constructs compile w/out error and behave correctly: (1) explicit cast to SomeUsefulData* as a comiler hint return EvaluateSomeCondition() ? (SomeUsefulData *)m_pData : NULL; (2) if/else instead of ?: if (EvaluateSomeCondition()) return m_pData; else return NULL; (3) skip the condition check and return m_pData as a SomeUsefulData* directly return m_pData; **********[ END DISCUSSION ]**********/ } private: ObjectPtr<SomeUsefulData> m_pData; }; int _tmain(int argc, _TCHAR* argv[]) { return 0; }

Read the article

Service Discovery in WCF 4.0 – Part 1

- by Shaun

When designing a service oriented architecture (SOA) system, there will be a lot of services with many service contracts, endpoints and behaviors. Besides the client calling the service, in a large distributed system a service may invoke other services. In this case, one service might need to know the endpoints it invokes. This might not be a problem in a small system. But when you have more than 10 services this might be a problem. For example in my current product, there are around 10 services, such as the user authentication service, UI integration service, location service, license service, device monitor service, event monitor service, schedule job service, accounting service, player management service, etc.. Benefit of Discovery Service Since almost all my services need to invoke at least one other service. This would be a difficult task to make sure all services endpoints are configured correctly in every service. And furthermore, it would be a nightmare when a service changed its endpoint at runtime. Hence, we need a discovery service to remove the dependency (configuration dependency). A discovery service plays as a service dictionary which stores the relationship between the contracts and the endpoints for every service. By using the discovery service, when service X wants to invoke service Y, it just need to ask the discovery service where is service Y, then the discovery service will return all proper endpoints of service Y, then service X can use the endpoint to send the request to service Y. And when some services changed their endpoint address, all need to do is to update its records in the discovery service then all others will know its new endpoint. In WCF 4.0 Discovery it supports both managed proxy discovery mode and ad-hoc discovery mode. In ad-hoc mode there is no standalone discovery service. When a client wanted to invoke a service, it will broadcast an message (normally in UDP protocol) to the entire network with the service match criteria. All services which enabled the discovery behavior will receive this message and only those matched services will send their endpoint back to the client. The managed proxy discovery service works as I described above. In this post I will only cover the managed proxy mode, where there’s a discovery service. For more information about the ad-hoc mode please refer to the MSDN. Service Announcement and Probe The main functionality of discovery service should be return the proper endpoint addresses back to the service who is looking for. In most cases the consume service (as a client) will send the contract which it wanted to request to the discovery service. And then the discovery service will find the endpoint and respond. Sometimes the contract and endpoint are not enough. It also contains versioning, extensions attributes. This post I will only cover the case includes contract and endpoint. When a client (or sometimes a service who need to invoke another service) need to connect to a target service, it will firstly request the discovery service through the “Probe” method with the criteria. Basically the criteria contains the contract type name of the target service. Then the discovery service will search its endpoint repository by the criteria. The repository might be a database, a distributed cache or a flat XML file. If it matches, the discovery service will grab the endpoint information (it’s called discovery endpoint metadata in WCF) and send back. And this is called “Probe”. Finally the client received the discovery endpoint metadata and will use the endpoint to connect to the target service. Besides the probe, discovery service should take the responsible to know there is a new service available when it goes online, as well as stopped when it goes offline. This feature is named “Announcement”. When a service started and stopped, it will announce to the discovery service. So the basic functionality of a discovery service should includes: 1, An endpoint which receive the service online message, and add the service endpoint information in the discovery repository. 2, An endpoint which receive the service offline message, and remove the service endpoint information from the discovery repository. 3, An endpoint which receive the client probe message, and return the matches service endpoints, and return the discovery endpoint metadata. WCF 4.0 discovery service just covers all these features in it's infrastructure classes. Discovery Service in WCF 4.0 WCF 4.0 introduced a new assembly named System.ServiceModel.Discovery which has all necessary classes and interfaces to build a WS-Discovery compliant discovery service. It supports ad-hoc and managed proxy modes. For the case mentioned in this post, what we need to build is a standalone discovery service, which is the managed proxy discovery service mode. To build a managed discovery service in WCF 4.0 just create a new class inherits from the abstract class System.ServiceModel.Discovery.DiscoveryProxy. This class implemented and abstracted the procedures of service announcement and probe. And it exposes 8 abstract methods where we can implement our own endpoint register, unregister and find logic. These 8 methods are asynchronized, which means all invokes to the discovery service are asynchronously, for better service capability and performance. 1, OnBeginOnlineAnnouncement, OnEndOnlineAnnouncement: Invoked when a service sent the online announcement message. We need to add the endpoint information to the repository in this method. 2, OnBeginOfflineAnnouncement, OnEndOfflineAnnouncement: Invoked when a service sent the offline announcement message. We need to remove the endpoint information from the repository in this method. 3, OnBeginFind, OnEndFind: Invoked when a client sent the probe message that want to find the service endpoint information. We need to look for the proper endpoints by matching the client’s criteria through the repository in this method. 4, OnBeginResolve, OnEndResolve: Invoked then a client sent the resolve message. Different from the find method, when using resolve method the discovery service will return the exactly one service endpoint metadata to the client. In our example we will NOT implement this method. Let’s create our own discovery service, inherit the base System.ServiceModel.Discovery.DiscoveryProxy. We also need to specify the service behavior in this class. Since the build-in discovery service host class only support the singleton mode, we must set its instance context mode to single. 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Text; 5: using System.ServiceModel.Discovery; 6: using System.ServiceModel; 7: 8: namespace Phare.Service 9: { 10: [ServiceBehavior(InstanceContextMode = InstanceContextMode.Single, ConcurrencyMode = ConcurrencyMode.Multiple)] 11: public class ManagedProxyDiscoveryService : DiscoveryProxy 12: { 13: protected override IAsyncResult OnBeginFind(FindRequestContext findRequestContext, AsyncCallback callback, object state) 14: { 15: throw new NotImplementedException(); 16: } 17: 18: protected override IAsyncResult OnBeginOfflineAnnouncement(DiscoveryMessageSequence messageSequence, EndpointDiscoveryMetadata endpointDiscoveryMetadata, AsyncCallback callback, object state) 19: { 20: throw new NotImplementedException(); 21: } 22: 23: protected override IAsyncResult OnBeginOnlineAnnouncement(DiscoveryMessageSequence messageSequence, EndpointDiscoveryMetadata endpointDiscoveryMetadata, AsyncCallback callback, object state) 24: { 25: throw new NotImplementedException(); 26: } 27: 28: protected override IAsyncResult OnBeginResolve(ResolveCriteria resolveCriteria, AsyncCallback callback, object state) 29: { 30: throw new NotImplementedException(); 31: } 32: 33: protected override void OnEndFind(IAsyncResult result) 34: { 35: throw new NotImplementedException(); 36: } 37: 38: protected override void OnEndOfflineAnnouncement(IAsyncResult result) 39: { 40: throw new NotImplementedException(); 41: } 42: 43: protected override void OnEndOnlineAnnouncement(IAsyncResult result) 44: { 45: throw new NotImplementedException(); 46: } 47: 48: protected override EndpointDiscoveryMetadata OnEndResolve(IAsyncResult result) 49: { 50: throw new NotImplementedException(); 51: } 52: } 53: } Then let’s implement the online, offline and find methods one by one. WCF discovery service gives us full flexibility to implement the endpoint add, remove and find logic. For the demo purpose we will use an internal dictionary to store the services’ endpoint metadata. In the next post we will see how to serialize and store these information in database. Define a concurrent dictionary inside the service class since our it will be used in the multiple threads scenario. 1: [ServiceBehavior(InstanceContextMode = InstanceContextMode.Single, ConcurrencyMode = ConcurrencyMode.Multiple)] 2: public class ManagedProxyDiscoveryService : DiscoveryProxy 3: { 4: private ConcurrentDictionary<EndpointAddress, EndpointDiscoveryMetadata> _services; 5: 6: public ManagedProxyDiscoveryService() 7: { 8: _services = new ConcurrentDictionary<EndpointAddress, EndpointDiscoveryMetadata>(); 9: } 10: } Then we can simply implement the logic of service online and offline. 1: protected override IAsyncResult OnBeginOnlineAnnouncement(DiscoveryMessageSequence messageSequence, EndpointDiscoveryMetadata endpointDiscoveryMetadata, AsyncCallback callback, object state) 2: { 3: _services.AddOrUpdate(endpointDiscoveryMetadata.Address, endpointDiscoveryMetadata, (key, value) => endpointDiscoveryMetadata); 4: return new OnOnlineAnnouncementAsyncResult(callback, state); 5: } 6: 7: protected override void OnEndOnlineAnnouncement(IAsyncResult result) 8: { 9: OnOnlineAnnouncementAsyncResult.End(result); 10: } 11: 12: protected override IAsyncResult OnBeginOfflineAnnouncement(DiscoveryMessageSequence messageSequence, EndpointDiscoveryMetadata endpointDiscoveryMetadata, AsyncCallback callback, object state) 13: { 14: EndpointDiscoveryMetadata endpoint = null; 15: _services.TryRemove(endpointDiscoveryMetadata.Address, out endpoint); 16: return new OnOfflineAnnouncementAsyncResult(callback, state); 17: } 18: 19: protected override void OnEndOfflineAnnouncement(IAsyncResult result) 20: { 21: OnOfflineAnnouncementAsyncResult.End(result); 22: } Regards the find method, the parameter FindRequestContext.Criteria has a method named IsMatch, which can be use for us to evaluate which service metadata is satisfied with the criteria. So the implementation of find method would be like this. 1: protected override IAsyncResult OnBeginFind(FindRequestContext findRequestContext, AsyncCallback callback, object state) 2: { 3: _services.Where(s => findRequestContext.Criteria.IsMatch(s.Value)) 4: .Select(s => s.Value) 5: .All(meta => 6: { 7: findRequestContext.AddMatchingEndpoint(meta); 8: return true; 9: }); 10: return new OnFindAsyncResult(callback, state); 11: } 12: 13: protected override void OnEndFind(IAsyncResult result) 14: { 15: OnFindAsyncResult.End(result); 16: } As you can see, we checked all endpoints metadata in repository by invoking the IsMatch method. Then add all proper endpoints metadata into the parameter. Finally since all these methods are asynchronized we need some AsyncResult classes as well. Below are the base class and the inherited classes used in previous methods. 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Text; 5: using System.Threading; 6: 7: namespace Phare.Service 8: { 9: abstract internal class AsyncResult : IAsyncResult 10: { 11: AsyncCallback callback; 12: bool completedSynchronously; 13: bool endCalled; 14: Exception exception; 15: bool isCompleted; 16: ManualResetEvent manualResetEvent; 17: object state; 18: object thisLock; 19: 20: protected AsyncResult(AsyncCallback callback, object state) 21: { 22: this.callback = callback; 23: this.state = state; 24: this.thisLock = new object(); 25: } 26: 27: public object AsyncState 28: { 29: get 30: { 31: return state; 32: } 33: } 34: 35: public WaitHandle AsyncWaitHandle 36: { 37: get 38: { 39: if (manualResetEvent != null) 40: { 41: return manualResetEvent; 42: } 43: lock (ThisLock) 44: { 45: if (manualResetEvent == null) 46: { 47: manualResetEvent = new ManualResetEvent(isCompleted); 48: } 49: } 50: return manualResetEvent; 51: } 52: } 53: 54: public bool CompletedSynchronously 55: { 56: get 57: { 58: return completedSynchronously; 59: } 60: } 61: 62: public bool IsCompleted 63: { 64: get 65: { 66: return isCompleted; 67: } 68: } 69: 70: object ThisLock 71: { 72: get 73: { 74: return this.thisLock; 75: } 76: } 77: 78: protected static TAsyncResult End<TAsyncResult>(IAsyncResult result) 79: where TAsyncResult : AsyncResult 80: { 81: if (result == null) 82: { 83: throw new ArgumentNullException("result"); 84: } 85: 86: TAsyncResult asyncResult = result as TAsyncResult; 87: 88: if (asyncResult == null) 89: { 90: throw new ArgumentException("Invalid async result.", "result"); 91: } 92: 93: if (asyncResult.endCalled) 94: { 95: throw new InvalidOperationException("Async object already ended."); 96: } 97: 98: asyncResult.endCalled = true; 99: 100: if (!asyncResult.isCompleted) 101: { 102: asyncResult.AsyncWaitHandle.WaitOne(); 103: } 104: 105: if (asyncResult.manualResetEvent != null) 106: { 107: asyncResult.manualResetEvent.Close(); 108: } 109: 110: if (asyncResult.exception != null) 111: { 112: throw asyncResult.exception; 113: } 114: 115: return asyncResult; 116: } 117: 118: protected void Complete(bool completedSynchronously) 119: { 120: if (isCompleted) 121: { 122: throw new InvalidOperationException("This async result is already completed."); 123: } 124: 125: this.completedSynchronously = completedSynchronously; 126: 127: if (completedSynchronously) 128: { 129: this.isCompleted = true; 130: } 131: else 132: { 133: lock (ThisLock) 134: { 135: this.isCompleted = true; 136: if (this.manualResetEvent != null) 137: { 138: this.manualResetEvent.Set(); 139: } 140: } 141: } 142: 143: if (callback != null) 144: { 145: callback(this); 146: } 147: } 148: 149: protected void Complete(bool completedSynchronously, Exception exception) 150: { 151: this.exception = exception; 152: Complete(completedSynchronously); 153: } 154: } 155: } 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Text; 5: using System.ServiceModel.Discovery; 6: using Phare.Service; 7: 8: namespace Phare.Service 9: { 10: internal sealed class OnOnlineAnnouncementAsyncResult : AsyncResult 11: { 12: public OnOnlineAnnouncementAsyncResult(AsyncCallback callback, object state) 13: : base(callback, state) 14: { 15: this.Complete(true); 16: } 17: 18: public static void End(IAsyncResult result) 19: { 20: AsyncResult.End<OnOnlineAnnouncementAsyncResult>(result); 21: } 22: 23: } 24: 25: sealed class OnOfflineAnnouncementAsyncResult : AsyncResult 26: { 27: public OnOfflineAnnouncementAsyncResult(AsyncCallback callback, object state) 28: : base(callback, state) 29: { 30: this.Complete(true); 31: } 32: 33: public static void End(IAsyncResult result) 34: { 35: AsyncResult.End<OnOfflineAnnouncementAsyncResult>(result); 36: } 37: } 38: 39: sealed class OnFindAsyncResult : AsyncResult 40: { 41: public OnFindAsyncResult(AsyncCallback callback, object state) 42: : base(callback, state) 43: { 44: this.Complete(true); 45: } 46: 47: public static void End(IAsyncResult result) 48: { 49: AsyncResult.End<OnFindAsyncResult>(result); 50: } 51: } 52: 53: sealed class OnResolveAsyncResult : AsyncResult 54: { 55: EndpointDiscoveryMetadata matchingEndpoint; 56: 57: public OnResolveAsyncResult(EndpointDiscoveryMetadata matchingEndpoint, AsyncCallback callback, object state) 58: : base(callback, state) 59: { 60: this.matchingEndpoint = matchingEndpoint; 61: this.Complete(true); 62: } 63: 64: public static EndpointDiscoveryMetadata End(IAsyncResult result) 65: { 66: OnResolveAsyncResult thisPtr = AsyncResult.End<OnResolveAsyncResult>(result); 67: return thisPtr.matchingEndpoint; 68: } 69: } 70: } Now we have finished the discovery service. The next step is to host it. The discovery service is a standard WCF service. So we can use ServiceHost on a console application, windows service, or in IIS as usual. The following code is how to host the discovery service we had just created in a console application. 1: static void Main(string[] args) 2: { 3: using (var host = new ServiceHost(new ManagedProxyDiscoveryService())) 4: { 5: host.Opened += (sender, e) => 6: { 7: host.Description.Endpoints.All((ep) => 8: { 9: Console.WriteLine(ep.ListenUri); 10: return true; 11: }); 12: }; 13: 14: try 15: { 16: // retrieve the announcement, probe endpoint and binding from configuration 17: var announcementEndpointAddress = new EndpointAddress(ConfigurationManager.AppSettings["announcementEndpointAddress"]); 18: var probeEndpointAddress = new EndpointAddress(ConfigurationManager.AppSettings["probeEndpointAddress"]); 19: var binding = Activator.CreateInstance(Type.GetType(ConfigurationManager.AppSettings["bindingType"], true, true)) as Binding; 20: var announcementEndpoint = new AnnouncementEndpoint(binding, announcementEndpointAddress); 21: var probeEndpoint = new DiscoveryEndpoint(binding, probeEndpointAddress); 22: probeEndpoint.IsSystemEndpoint = false; 23: // append the service endpoint for announcement and probe 24: host.AddServiceEndpoint(announcementEndpoint); 25: host.AddServiceEndpoint(probeEndpoint); 26: 27: host.Open(); 28: 29: Console.WriteLine("Press any key to exit."); 30: Console.ReadKey(); 31: } 32: catch (Exception ex) 33: { 34: Console.WriteLine(ex.ToString()); 35: } 36: } 37: 38: Console.WriteLine("Done."); 39: Console.ReadKey(); 40: } What we need to notice is that, the discovery service needs two endpoints for announcement and probe. In this example I just retrieve them from the configuration file. I also specified the binding of these two endpoints in configuration file as well. 1: <?xml version="1.0"?> 2: <configuration> 3: <startup> 4: <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/> 5: </startup> 6: <appSettings> 7: <add key="announcementEndpointAddress" value="net.tcp://localhost:10010/announcement"/> 8: <add key="probeEndpointAddress" value="net.tcp://localhost:10011/probe"/> 9: <add key="bindingType" value="System.ServiceModel.NetTcpBinding, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/> 10: </appSettings> 11: </configuration> And this is the console screen when I ran my discovery service. As you can see there are two endpoints listening for announcement message and probe message. Discoverable Service and Client Next, let’s create a WCF service that is discoverable, which means it can be found by the discovery service. To do so, we need to let the service send the online announcement message to the discovery service, as well as offline message before it shutdown. Just create a simple service which can make the incoming string to upper. The service contract and implementation would be like this. 1: [ServiceContract] 2: public interface IStringService 3: { 4: [OperationContract] 5: string ToUpper(string content); 6: } 1: public class StringService : IStringService 2: { 3: public string ToUpper(string content) 4: { 5: return content.ToUpper(); 6: } 7: } Then host this service in the console application. In order to make the discovery service easy to be tested the service address will be changed each time it’s started. 1: static void Main(string[] args) 2: { 3: var baseAddress = new Uri(string.Format("net.tcp://localhost:11001/stringservice/{0}/", Guid.NewGuid().ToString())); 4: 5: using (var host = new ServiceHost(typeof(StringService), baseAddress)) 6: { 7: host.Opened += (sender, e) => 8: { 9: Console.WriteLine("Service opened at {0}", host.Description.Endpoints.First().ListenUri); 10: }; 11: 12: host.AddServiceEndpoint(typeof(IStringService), new NetTcpBinding(), string.Empty); 13: 14: host.Open(); 15: 16: Console.WriteLine("Press any key to exit."); 17: Console.ReadKey(); 18: } 19: } Currently this service is NOT discoverable. We need to add a special service behavior so that it could send the online and offline message to the discovery service announcement endpoint when the host is opened and closed. WCF 4.0 introduced a service behavior named ServiceDiscoveryBehavior. When we specified the announcement endpoint address and appended it to the service behaviors this service will be discoverable. 1: var announcementAddress = new EndpointAddress(ConfigurationManager.AppSettings["announcementEndpointAddress"]); 2: var announcementBinding = Activator.CreateInstance(Type.GetType(ConfigurationManager.AppSettings["bindingType"], true, true)) as Binding; 3: var announcementEndpoint = new AnnouncementEndpoint(announcementBinding, announcementAddress); 4: var discoveryBehavior = new ServiceDiscoveryBehavior(); 5: discoveryBehavior.AnnouncementEndpoints.Add(announcementEndpoint); 6: host.Description.Behaviors.Add(discoveryBehavior); The ServiceDiscoveryBehavior utilizes the service extension and channel dispatcher to implement the online and offline announcement logic. In short, it injected the channel open and close procedure and send the online and offline message to the announcement endpoint. On client side, when we have the discovery service, a client can invoke a service without knowing its endpoint. WCF discovery assembly provides a class named DiscoveryClient, which can be used to find the proper service endpoint by passing the criteria. In the code below I initialized the DiscoveryClient, specified the discovery service probe endpoint address. Then I created the find criteria by specifying the service contract I wanted to use and invoke the Find method. This will send the probe message to the discovery service and it will find the endpoints back to me. The discovery service will return all endpoints that matches the find criteria, which means in the result of the find method there might be more than one endpoints. In this example I just returned the first matched one back. In the next post I will show how to extend our discovery service to make it work like a service load balancer. 1: static EndpointAddress FindServiceEndpoint() 2: { 3: var probeEndpointAddress = new EndpointAddress(ConfigurationManager.AppSettings["probeEndpointAddress"]); 4: var probeBinding = Activator.CreateInstance(Type.GetType(ConfigurationManager.AppSettings["bindingType"], true, true)) as Binding; 5: var discoveryEndpoint = new DiscoveryEndpoint(probeBinding, probeEndpointAddress); 6: 7: EndpointAddress address = null; 8: FindResponse result = null; 9: using (var discoveryClient = new DiscoveryClient(discoveryEndpoint)) 10: { 11: result = discoveryClient.Find(new FindCriteria(typeof(IStringService))); 12: } 13: 14: if (result != null && result.Endpoints.Any()) 15: { 16: var endpointMetadata = result.Endpoints.First(); 17: address = endpointMetadata.Address; 18: } 19: return address; 20: } Once we probed the discovery service we will receive the endpoint. So in the client code we can created the channel factory from the endpoint and binding, and invoke to the service. When creating the client side channel factory we need to make sure that the client side binding should be the same as the service side. WCF discovery service can be used to find the endpoint for a service contract, but the binding is NOT included. This is because the binding was not in the WS-Discovery specification. In the next post I will demonstrate how to add the binding information into the discovery service. At that moment the client don’t need to create the binding by itself. Instead it will use the binding received from the discovery service. 1: static void Main(string[] args) 2: { 3: Console.WriteLine("Say something..."); 4: var content = Console.ReadLine(); 5: while (!string.IsNullOrWhiteSpace(content)) 6: { 7: Console.WriteLine("Finding the service endpoint..."); 8: var address = FindServiceEndpoint(); 9: if (address == null) 10: { 11: Console.WriteLine("There is no endpoint matches the criteria."); 12: } 13: else 14: { 15: Console.WriteLine("Found the endpoint {0}", address.Uri); 16: 17: var factory = new ChannelFactory<IStringService>(new NetTcpBinding(), address); 18: factory.Opened += (sender, e) => 19: { 20: Console.WriteLine("Connecting to {0}.", factory.Endpoint.ListenUri); 21: }; 22: var proxy = factory.CreateChannel(); 23: using (proxy as IDisposable) 24: { 25: Console.WriteLine("ToUpper: {0} => {1}", content, proxy.ToUpper(content)); 26: } 27: } 28: 29: Console.WriteLine("Say something..."); 30: content = Console.ReadLine(); 31: } 32: } Similarly, the discovery service probe endpoint and binding were defined in the configuration file. 1: <?xml version="1.0"?> 2: <configuration> 3: <startup> 4: <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/> 5: </startup> 6: <appSettings> 7: <add key="announcementEndpointAddress" value="net.tcp://localhost:10010/announcement"/> 8: <add key="probeEndpointAddress" value="net.tcp://localhost:10011/probe"/> 9: <add key="bindingType" value="System.ServiceModel.NetTcpBinding, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/> 10: </appSettings> 11: </configuration> OK, now let’s have a test. Firstly start the discovery service, and then start our discoverable service. When it started it will announced to the discovery service and registered its endpoint into the repository, which is the local dictionary. And then start the client and type something. As you can see the client asked the discovery service for the endpoint and then establish the connection to the discoverable service. And more interesting, do NOT close the client console but terminate the discoverable service but press the enter key. This will make the service send the offline message to the discovery service. Then start the discoverable service again. Since we made it use a different address each time it started, currently it should be hosted on another address. If we enter something in the client we could see that it asked the discovery service and retrieve the new endpoint, and connect the the service. Summary In this post I discussed the benefit of using the discovery service and the procedures of service announcement and probe. I also demonstrated how to leverage the WCF Discovery feature in WCF 4.0 to build a simple managed discovery service. For test purpose, in this example I used the in memory dictionary as the discovery endpoint metadata repository. And when finding I also just return the first matched endpoint back. I also hard coded the bindings between the discoverable service and the client. In next post I will show you how to solve the problem mentioned above, as well as some additional feature for production usage. You can download the code here. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

Setting up and using Bing Translate API Service for Machine Translation

- by Rick Strahl

Last week I spent quite a bit of time trying to set up the Bing Translate API service. I can honestly say this was one of the most screwed up developer experiences I've had in a long while - specifically related to the byzantine sign up process that Microsoft has in place. Not only is it nearly impossible to find decent documentation on the required signup process, some of the links in the docs are just plain wrong, and some of the account pages you need to access the actual account information once signed up are not linked anywhere from the administration UI. To make things even harder is the fact that the APIs changed a while back, with a completely new authentication scheme that's described and not directly linked documentation topic also made for a very frustrating search experience. It's a bummer that this is the case too, because the actual API itself is easy to use and works very well - fast and reasonably accurate (as accurate as you can expect machine translation to be). But the sign up process is a pain in the ass doubtlessly leaving many people giving up in frustration. In this post I'll try to hit all the points needed to set up to use the Bing Translate API in one place since such a document seems to be missing from Microsoft. Hopefully the API folks at Microsoft will get their shit together and actually provide this sort of info on their site… Signing Up The first step required is to create a Windows Azure MarketPlace account. Go to: https://datamarket.azure.com/ Sign in with your Windows Live Id If you don't have an account you will be taken to a registration page which you have to fill out. Follow the links and complete the registration. Once you're signed in you can start adding services. Click on the Data Link on the main page Select Microsoft Translator from the list This adds the Microsoft Bing Translator to your services. Pricing The page shows the pricing matrix and the free service which provides 2 megabytes for translations a month for free. Prices go up steeply from there. Pricing is determined by actual bytes of the result translations used. Max translations are 1000 characters so at minimum this means you get around 2000 translations a month for free. However most translations are probable much less so you can expect larger number of translations to go through. For testing or low volume translations this should be just fine. Once signed up there are no further instructions and you're left in limbo on the MS site. Register your Application Once you've created the Data association with Translator the next step is registering your application. To do this you need to access your developer account. Go to https://datamarket.azure.com/developer/applications/register Provide a ClientId, which is effectively the unique string identifier for your application (not your customer id!) Provide your name The client secret was auto-created and this becomes your 'password' For the redirect url provide any https url: https://microsoft.com works Give this application a description of your choice so you can identify it in the list of apps Now, once you've registered your application, keep track of the ClientId and ClientSecret - those are the two keys you need to authenticate before you can call the Translate API. Oddly the applications page is hidden from the Azure Portal UI. I couldn't find a direct link from anywhere on the site back to this page where I can examine my developer application keys. To find them you can go to: https://datamarket.azure.com/developer/applications You can come back here to look at your registered applications and pick up the ClientID and ClientSecret. Fun eh? But we're now ready to actually call the API and do some translating. Using the Bing Translate API The good news is that after this signup hell, using the API is pretty straightforward. To use the translation API you'll need to actually use two services: You need to call an authentication API service first, before you can call the actual translator API. These two APIs live on different domains, and the authentication API returns JSON data while the translator service returns XML. So much for consistency. Authentication The first step is authentication. The service uses oAuth authentication with a bearer token that has to be passed to the translator API. The authentication call retrieves the oAuth token that you can then use with the translate API call. The bearer token has a short 10 minute life time, so while you can cache it for successive calls, the token can't be cached for long periods. This means for Web backend requests you typically will have to authenticate each time unless you build a more elaborate caching scheme that takes the timeout into account (perhaps using the ASP.NET Cache object). For low volume operations you can probably get away with simply calling the auth API for every translation you do. To call the Authentication API use code like this:/// /// Retrieves an oAuth authentication token to be used on the translate /// API request. The result string needs to be passed as a bearer token /// to the translate API. /// /// You can find client ID and Secret (or register a new one) at: /// https://datamarket.azure.com/developer/applications/ /// /// The client ID of your application /// The client secret or password /// public string GetBingAuthToken(string clientId = null, string clientSecret = null) { string authBaseUrl = https://datamarket.accesscontrol.windows.net/v2/OAuth2-13; if (string.IsNullOrEmpty(clientId) || string.IsNullOrEmpty(clientSecret)) { ErrorMessage = Resources.Resources.Client_Id_and_Client_Secret_must_be_provided; return null; } var postData = string.Format("grant_type=client_credentials&client_id={0}" + "&client_secret={1}" + "&scope=http://api.microsofttranslator.com", HttpUtility.UrlEncode(clientId), HttpUtility.UrlEncode(clientSecret)); // POST Auth data to the oauth API string res, token; try { var web = new WebClient(); web.Encoding = Encoding.UTF8; res = web.UploadString(authBaseUrl, postData); } catch (Exception ex) { ErrorMessage = ex.GetBaseException().Message; return null; } var ser = new JavaScriptSerializer(); var auth = ser.Deserialize<BingAuth>(res); if (auth == null) return null; token = auth.access_token; return token; } private class BingAuth { public string token_type { get; set; } public string access_token { get; set; } } This code basically takes the client id and secret and posts it at the oAuth endpoint which returns a JSON string. Here I use the JavaScript serializer to deserialize the JSON into a custom object I created just for deserialization. You can also use JSON.NET and dynamic deserialization if you are already using JSON.NET in your app in which case you don't need the extra type. In my library that houses this component I don't, so I just rely on the built in serializer. The auth method returns a long base64 encoded string which can be used as a bearer token in the translate API call. Translation Once you have the authentication token you can use it to pass to the translate API. The auth token is passed as an Authorization header and the value is prefixed with a 'Bearer ' prefix for the string. Here's what the simple Translate API call looks like:/// /// Uses the Bing API service to perform translation /// Bing can translate up to 1000 characters. /// /// Requires that you provide a CLientId and ClientSecret /// or set the configuration values for these two. /// /// More info on setup: /// http://www.west-wind.com/weblog/ /// /// Text to translate /// Two letter culture name /// Two letter culture name /// Pass an access token retrieved with GetBingAuthToken. /// If not passed the default keys from .config file are used if any /// public string TranslateBing(string text, string fromCulture, string toCulture, string accessToken = null) { string serviceUrl = "http://api.microsofttranslator.com/V2/Http.svc/Translate"; if (accessToken == null) { accessToken = GetBingAuthToken(); if (accessToken == null) return null; } string res; try { var web = new WebClient(); web.Headers.Add("Authorization", "Bearer " + accessToken); string ct = "text/plain"; string postData = string.Format("?text={0}&from={1}&to={2}&contentType={3}", HttpUtility.UrlEncode(text), fromCulture, toCulture, HttpUtility.UrlEncode(ct)); web.Encoding = Encoding.UTF8; res = web.DownloadString(serviceUrl + postData); } catch (Exception e) { ErrorMessage = e.GetBaseException().Message; return null; } // result is a single XML Element fragment var doc = new XmlDocument(); doc.LoadXml(res); return doc.DocumentElement.InnerText; } The first of this code deals with ensuring the auth token exists. You can either pass the token into the method manually or let the method automatically retrieve the auth code on its own. In my case I'm using this inside of a Web application and in that situation I simply need to re-authenticate every time as there's no convenient way to manage the lifetime of the auth cookie. The auth token is added as an Authorization HTTP header prefixed with 'Bearer ' and attached to the request. The text to translate, the from and to language codes and a result format are passed on the query string of this HTTP GET request against the Translate API. The translate API returns an XML string which contains a single element with the translated string. Using the Wrapper Methods It should be pretty obvious how to use these two methods but here are a couple of test methods that demonstrate the two usage scenarios:[TestMethod] public void TranslateBingWithAuthTest() { var translate = new TranslationServices(); string clientId = DbResourceConfiguration.Current.BingClientId; string clientSecret = DbResourceConfiguration.Current.BingClientSecret; string auth = translate.GetBingAuthToken(clientId, clientSecret); Assert.IsNotNull(auth); string text = translate.TranslateBing("Hello World we're back home!", "en", "de",auth); Assert.IsNotNull(text, translate.ErrorMessage); Console.WriteLine(text); } [TestMethod] public void TranslateBingIntegratedTest() { var translate = new TranslationServices(); string text = translate.TranslateBing("Hello World we're back home!","en","de"); Assert.IsNotNull(text, translate.ErrorMessage); Console.WriteLine(text); } Other API Methods The Translate API has a number of methods available and this one is the simplest one but probably also the most common one that translates a single string. You can find additional methods for this API here: http://msdn.microsoft.com/en-us/library/ff512419.aspx Soap and AJAX APIs are also available and documented on MSDN: http://msdn.microsoft.com/en-us/library/dd576287.aspx These links will be your starting points for calling other methods in this API. Dual Interface I've talked about my database driven localization provider here in the past, and it's for this tool that I added the Bing localization support. Basically I have a localization administration form that allows me to translate individual strings right out of the UI, using both Google and Bing APIs: As you can see in this example, the results from Google and Bing can vary quite a bit - in this case Google is stumped while Bing actually generated a valid translation. At other times it's the other way around - it's pretty useful to see multiple translations at the same time. Here I can choose from one of the values and driectly embed them into the translated text field. Lost in Translation There you have it. As I mentioned using the API once you have all the bureaucratic crap out of the way calling the APIs is fairly straight forward and reasonably fast, even if you have to call the Auth API for every call. Hopefully this post will help out a few of you trying to navigate the Microsoft bureaucracy, at least until next time Microsoft upends everything and introduces new ways to sign up again. Until then - happy translating… Related Posts Translation method Source on Github Translating with Google Translate without Google API Keys Creating a data-driven ASP.NET Resource Provider© Rick Strahl, West Wind Technologies, 2005-2013Posted in Localization ASP.NET .NET Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

C#/.NET Little Wonders: The Joy of Anonymous Types

- by James Michael Hare

Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. In the .NET 3 Framework, Microsoft introduced the concept of anonymous types, which provide a way to create a quick, compiler-generated types at the point of instantiation. These may seem trivial, but are very handy for concisely creating lightweight, strongly-typed objects containing only read-only properties that can be used within a given scope. Creating an Anonymous Type In short, an anonymous type is a reference type that derives directly from object and is defined by its set of properties base on their names, number, types, and order given at initialization. In addition to just holding these properties, it is also given appropriate overridden implementations for Equals() and GetHashCode() that take into account all of the properties to correctly perform property comparisons and hashing. Also overridden is an implementation of ToString() which makes it easy to display the contents of an anonymous type instance in a fairly concise manner. To construct an anonymous type instance, you use basically the same initialization syntax as with a regular type. So, for example, if we wanted to create an anonymous type to represent a particular point, we could do this: 1: var point = new { X = 13, Y = 7 }; Note the similarity between anonymous type initialization and regular initialization. The main difference is that the compiler generates the type name and the properties (as readonly) based on the names and order provided, and inferring their types from the expressions they are assigned to. It is key to remember that all of those factors (number, names, types, order of properties) determine the anonymous type. This is important, because while these two instances share the same anonymous type: 1: // same names, types, and order 2: var point1 = new { X = 13, Y = 7 }; 3: var point2 = new { X = 5, Y = 0 }; These similar ones do not: 1: var point3 = new { Y = 3, X = 5 }; // different order 2: var point4 = new { X = 3, Y = 5.0 }; // different type for Y 3: var point5 = new {MyX = 3, MyY = 5 }; // different names 4: var point6 = new { X = 1, Y = 2, Z = 3 }; // different count Limitations on Property Initialization Expressions The expression for a property in an anonymous type initialization cannot be null (though it can evaluate to null) or an anonymous function. For example, the following are illegal: 1: // Null can't be used directly. Null reference of what type? 2: var cantUseNull = new { Value = null }; 3: 4: // Anonymous methods cannot be used. 5: var cantUseAnonymousFxn = new { Value = () => Console.WriteLine(“Can’t.”) }; Note that the restriction on null is just that you can’t use it directly as the expression, because otherwise how would it be able to determine the type? You can, however, use it indirectly assigning a null expression such as a typed variable with the value null, or by casting null to a specific type: 1: string str = null; 2: var fineIndirectly = new { Value = str }; 3: var fineCast = new { Value = (string)null }; All of the examples above name the properties explicitly, but you can also implicitly name properties if they are being set from a property, field, or variable. In these cases, when a field, property, or variable is used alone, and you don’t specify a property name assigned to it, the new property will have the same name. For example: 1: int variable = 42; 2: 3: // creates two properties named varriable and Now 4: var implicitProperties = new { variable, DateTime.Now }; Is the same type as: 1: var explicitProperties = new { variable = variable, Now = DateTime.Now }; But this only works if you are using an existing field, variable, or property directly as the expression. If you use a more complex expression then the name cannot be inferred: 1: // can't infer the name variable from variable * 2, must name explicitly 2: var wontWork = new { variable * 2, DateTime.Now }; In the example above, since we typed variable * 2, it is no longer just a variable and thus we would have to assign the property a name explicitly. ToString() on Anonymous Types One of the more trivial overrides that an anonymous type provides you is a ToString() method that prints the value of the anonymous type instance in much the same format as it was initialized (except actual values instead of expressions as appropriate of course). For example, if you had: 1: var point = new { X = 13, Y = 42 }; And then print it out: 1: Console.WriteLine(point.ToString()); You will get: 1: { X = 13, Y = 42 } While this isn’t necessarily the most stunning feature of anonymous types, it can be handy for debugging or logging values in a fairly easy to read format. Comparing Anonymous Type Instances Because anonymous types automatically create appropriate overrides of Equals() and GetHashCode() based on the underlying properties, we can reliably compare two instances or get hash codes. For example, if we had the following 3 points: 1: var point1 = new { X = 1, Y = 2 }; 2: var point2 = new { X = 1, Y = 2 }; 3: var point3 = new { Y = 2, X = 1 }; If we compare point1 and point2 we’ll see that Equals() returns true because they overridden version of Equals() sees that the types are the same (same number, names, types, and order of properties) and that the values are the same. In addition, because all equal objects should have the same hash code, we’ll see that the hash codes evaluate to the same as well: 1: // true, same type, same values 2: Console.WriteLine(point1.Equals(point2)); 3: 4: // true, equal anonymous type instances always have same hash code 5: Console.WriteLine(point1.GetHashCode() == point2.GetHashCode()); However, if we compare point2 and point3 we get false. Even though the names, types, and values of the properties are the same, the order is not, thus they are two different types and cannot be compared (and thus return false). And, since they are not equal objects (even though they have the same value) there is a good chance their hash codes are different as well (though not guaranteed): 1: // false, different types 2: Console.WriteLine(point2.Equals(point3)); 3: 4: // quite possibly false (was false on my machine) 5: Console.WriteLine(point2.GetHashCode() == point3.GetHashCode()); Using Anonymous Types Now that we’ve created instances of anonymous types, let’s actually use them. The property names (whether implicit or explicit) are used to access the individual properties of the anonymous type. The main thing, once again, to keep in mind is that the properties are readonly, so you cannot assign the properties a new value (note: this does not mean that instances referred to by a property are immutable – for more information check out C#/.NET Fundamentals: Returning Data Immutably in a Mutable World). Thus, if we have the following anonymous type instance: 1: var point = new { X = 13, Y = 42 }; We can get the properties as you’d expect: 1: Console.WriteLine(“The point is: ({0},{1})”, point.X, point.Y); But we cannot alter the property values: 1: // compiler error, properties are readonly 2: point.X = 99; Further, since the anonymous type name is only known by the compiler, there is no easy way to pass anonymous type instances outside of a given scope. The only real choices are to pass them as object or dynamic. But really that is not the intention of using anonymous types. If you find yourself needing to pass an anonymous type outside of a given scope, you should really consider making a POCO (Plain Old CLR Type – i.e. a class that contains just properties to hold data with little/no business logic) instead. Given that, why use them at all? Couldn’t you always just create a POCO to represent every anonymous type you needed? Sure you could, but then you might litter your solution with many small POCO classes that have very localized uses. It turns out this is the key to when to use anonymous types to your advantage: when you just need a lightweight type in a local context to store intermediate results, consider an anonymous type – but when that result is more long-lived and used outside of the current scope, consider a POCO instead. So what do we mean by intermediate results in a local context? Well, a classic example would be filtering down results from a LINQ expression. For example, let’s say we had a List<Transaction>, where Transaction is defined something like: 1: public class Transaction 2: { 3: public string UserId { get; set; } 4: public DateTime At { get; set; } 5: public decimal Amount { get; set; } 6: // … 7: } And let’s say we had this data in our List<Transaction>: 1: var transactions = new List<Transaction> 2: { 3: new Transaction { UserId = "Jim", At = DateTime.Now, Amount = 2200.00m }, 4: new Transaction { UserId = "Jim", At = DateTime.Now, Amount = -1100.00m }, 5: new Transaction { UserId = "Jim", At = DateTime.Now.AddDays(-1), Amount = 900.00m }, 6: new Transaction { UserId = "John", At = DateTime.Now.AddDays(-2), Amount = 300.00m }, 7: new Transaction { UserId = "John", At = DateTime.Now, Amount = -10.00m }, 8: new Transaction { UserId = "Jane", At = DateTime.Now, Amount = 200.00m }, 9: new Transaction { UserId = "Jane", At = DateTime.Now, Amount = -50.00m }, 10: new Transaction { UserId = "Jaime", At = DateTime.Now.AddDays(-3), Amount = -100.00m }, 11: new Transaction { UserId = "Jaime", At = DateTime.Now.AddDays(-3), Amount = 300.00m }, 12: }; So let’s say we wanted to get the transactions for each day for each user. That is, for each day we’d want to see the transactions each user performed. We could do this very simply with a nice LINQ expression, without the need of creating any POCOs: 1: // group the transactions based on an anonymous type with properties UserId and Date: 2: byUserAndDay = transactions 3: .GroupBy(tx => new { tx.UserId, tx.At.Date }) 4: .OrderBy(grp => grp.Key.Date) 5: .ThenBy(grp => grp.Key.UserId); Now, those of you who have attempted to use custom classes as a grouping type before (such as GroupBy(), Distinct(), etc.) may have discovered the hard way that LINQ gets a lot of its speed by utilizing not on Equals(), but also GetHashCode() on the type you are grouping by. Thus, when you use custom types for these purposes, you generally end up having to write custom Equals() and GetHashCode() implementations or you won’t get the results you were expecting (the default implementations of Equals() and GetHashCode() are reference equality and reference identity based respectively). As we said before, it turns out that anonymous types already do these critical overrides for you. This makes them even more convenient to use! Instead of creating a small POCO to handle this grouping, and then having to implement a custom Equals() and GetHashCode() every time, we can just take advantage of the fact that anonymous types automatically override these methods with appropriate implementations that take into account the values of all of the properties. Now, we can look at our results: 1: foreach (var group in byUserAndDay) 2: { 3: // the group’s Key is an instance of our anonymous type 4: Console.WriteLine("{0} on {1:MM/dd/yyyy} did:", group.Key.UserId, group.Key.Date); 5: 6: // each grouping contains a sequence of the items. 7: foreach (var tx in group) 8: { 9: Console.WriteLine("\t{0}", tx.Amount); 10: } 11: } And see: 1: Jaime on 06/18/2012 did: 2: -100.00 3: 300.00 4: 5: John on 06/19/2012 did: 6: 300.00 7: 8: Jim on 06/20/2012 did: 9: 900.00 10: 11: Jane on 06/21/2012 did: 12: 200.00 13: -50.00 14: 15: Jim on 06/21/2012 did: 16: 2200.00 17: -1100.00 18: 19: John on 06/21/2012 did: 20: -10.00 Again, sure we could have just built a POCO to do this, given it an appropriate Equals() and GetHashCode() method, but that would have bloated our code with so many extra lines and been more difficult to maintain if the properties change. Summary Anonymous types are one of those Little Wonders of the .NET language that are perfect at exactly that time when you need a temporary type to hold a set of properties together for an intermediate result. While they are not very useful beyond the scope in which they are defined, they are excellent in LINQ expressions as a way to create and us intermediary values for further expressions and analysis. Anonymous types are defined by the compiler based on the number, type, names, and order of properties created, and they automatically implement appropriate Equals() and GetHashCode() overrides (as well as ToString()) which makes them ideal for LINQ expressions where you need to create a set of properties to group, evaluate, etc. Technorati Tags: C#,CSharp,.NET,Little Wonders,Anonymous Types,LINQ

Read the article

Download YouTube Videos the Easy Way

- by Trevor Bekolay

You can’t be online all the time, and despite the majority of YouTube videos being nut-shots and Lady Gaga parodies, there is a lot of great content that you might want to download and watch offline. There are some programs and browser extensions to do this, but we’ve found that the easiest and quickest method is a bookmarklet that was originally posted on the Google Operating System blog (it’s since been removed). It will let you download standard quality and high-definition movies as MP4 files. Also, because it’s a bookmarklet, it will work on any modern web browser, and on any operating system! Installing the bookmarket is easy – just drag and drop the Get YouTube video link below to the bookmarks bar of your browser of choice. If you’ve hidden the bookmark bar, in most browsers you can right-click on the link and save it to your bookmarks. Get YouTube video With the bookmarklet available in your browser, go to the YouTube video that you’d like to download. Click on the Get YouTube video link in your bookmarks bar, or in the bookmarks menu, wherever you saved it earlier. You will notice some new links appear below the description of the video. If you download the standard definition file, it will save as “video.mp4” by default. However, if you download the high definition file, it will save with the same name as the title of the video. There are many methods of downloading YouTube videos…but we think this is the easiest and quickest method. You don’t have to install anything or use up resources, but you can still get a link to download an MP4 with one click. Do you use a different method to download Youtube videos? Let us know about it in the comments! javascript:(function(){if(document.getElementById(’download-youtube-video’))return;var args=null,video_title=null,video_id=null,video_hash=null;var download_code=new Array();var fmt_labels={‘18′:’standard%20MP4′,’22′:’HD%20720p’,'37′:’HD%201080p’};try{args=yt.getConfig(’SWF_ARGS’);video_title=yt.getConfig(’VIDEO_TITLE’)}catch(e){}if(args){var fmt_url_map=unescape(args['fmt_url_map']);if(fmt_url_map==”)return;video_id=args['video_id'];video_hash=args['t'];video_title=video_title.replace(/[%22\'\?\\\/\:\*%3C%3E]/g,”);var fmt=new Array();var formats=fmt_url_map.split(’,');var format;for(var i=0;i%3Cformats.length;i++){var format_elems=formats[i].split(’|');fmt[format_elems[0]]=unescape(format_elems[1])}for(format in fmt_labels){if(fmt[format]!=null){download_code.push(’%3Ca%20href=\”+(fmt[format]+’&title=’+video_title)+’\'%3E’+fmt_labels[format]+’%3C/a%3E’)}elseif(format==’18′){download_code.push(’%3Ca%20href=\’http://www.youtube.com/get_video?fmt=18&video_id=’+video_id+’&t=’+video_hash+’\'%3E’+fmt_labels[format]+’%3C/a%3E’)}}}if(video_id==null||video_hash==null)return;var div_embed=document.getElementById(’watch-embed-div’);if(div_embed){var div_download=document.createElement(’div’);div_download.innerHTML=’%3Cbr%20/%3E%3Cspan%20id=\’download-youtube-video\’%3EDownload:%20′+download_code.join(’%20|%20′)+’%3C/span%3E’;div_embed.appendChild(div_download)}})() Similar Articles Productive Geek Tips Watch YouTube Videos in Cinema Style in FirefoxDownload YouTube Videos with Cheetah YouTube DownloaderStop YouTube Videos from Automatically Playing in FirefoxImprove YouTube Video Viewing in Google ChromeConvert YouTube Videos to MP3 with YouTube Downloader TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab

Read the article

More SQL Smells

- by Nick Harrison

Let's continue exploring some of the SQL Smells from Phil's list. He has been putting together. Datatype mis-matches in predicates that rely on implicit conversion.(Plamen Ratchev) This is a great example poking holes in the whole theory of "If it works it's not broken" Queries will this probably will generally work and give the correct response. In fact, without careful analysis, you probably may be completely oblivious that there is even a problem. This subtle little problem will needlessly complicate queries and slow them down regardless of the indexes applied. Consider this example: CREATE TABLE [dbo].[Page]( [PageId] [int] IDENTITY(1,1) NOT NULL, [Title] [varchar](75) NOT NULL, [Sequence] [int] NOT NULL, [ThemeId] [int] NOT NULL, [CustomCss] [text] NOT NULL, [CustomScript] [text] NOT NULL, [PageGroupId] [int] NOT NULL; CREATE PROCEDURE PageSelectBySequence ( @sequenceMin smallint , @sequenceMax smallint ) AS BEGIN SELECT [PageId] , [Title] , [Sequence] , [ThemeId] , [CustomCss] , [CustomScript] , [PageGroupId] FROM [CMS].[dbo].[Page] WHERE Sequence BETWEEN @sequenceMin AND @SequenceMax END Note that the Sequence column is defined as int while the sequence parameter is defined as a small int. The problem is that the database may have to do a lot of type conversions to evaluate the query. In some cases, this may even negate the indexes that you have in place. Using Correlated subqueries instead of a join (Dave_Levy/ Plamen Ratchev) There are two main problems here. The first is a little subjective, since this is a non-standard way of expressing the query, it is harder to understand. The other problem is much more objective and potentially problematic. You are taking much of the control away from the optimizer. Written properly, such a query may well out perform a corresponding query written with traditional joins. More likely than not, performance will degrade. Whenever you assume that you know better than the optimizer, you will most likely be wrong. This is the fundmental problem with any hint. Consider a query like this: SELECT Page.Title , Page.Sequence , Page.ThemeId , Page.CustomCss , Page.CustomScript , PageEffectParams.Name , PageEffectParams.Value , ( SELECT EffectName FROM dbo.Effect WHERE EffectId = dbo.PageEffects.EffectId ) AS EffectName FROM Page INNER JOIN PageEffect ON Page.PageId = PageEffects.PageId INNER JOIN PageEffectParam ON PageEffects.PageEffectId = PageEffectParams.PageEffectId This can and should be written as: SELECT Page.Title , Page.Sequence , Page.ThemeId , Page.CustomCss , Page.CustomScript , PageEffectParams.Name , PageEffectParams.Value , EffectName FROM Page INNER JOIN PageEffect ON Page.PageId = PageEffects.PageId INNER JOIN PageEffectParam ON PageEffects.PageEffectId = PageEffectParams.PageEffectId INNER JOIN dbo.Effect ON dbo.Effects.EffectId = dbo.PageEffects.EffectId The correlated query may just as easily show up in the where clause. It's not a good idea in the select clause or the where clause. Few or No comments. This one is a bit more complicated and controversial. All comments are not created equal. Some comments are helpful and need to be included. Other comments are not necessary and may indicate a problem. I tend to follow the rule of thumb that comments that explain why are good. Comments that explain how are bad. Many people may be shocked to hear the idea of a bad comment, but hear me out. If a comment is needed to explain what is going on or how it works, the logic is too complex and needs to be simplified. Comments that explain why are good. Comments may explain why the sql is needed are good. Comments that explain where the sql is used are good. Comments that explain how tables are related should not be needed if the sql is well written. If they are needed, you need to consider reworking the sql or simplify your data model. Use of functions in a WHERE clause. (Anil Das) Calling a function in the where clause will often negate the indexing strategy. The function will be called for every record considered. This will often a force a full table scan on the tables affected. Calling a function will not guarantee that there is a full table scan, but there is a good chance that it will. If you find that you often need to write queries using a particular function, you may need to add a column to the table that has the function already applied.

Read the article

SQL Server – Undelete a Table and Restore a Single Table from Backup

- by Mladen Prajdic

This post is part of the monthly community event called T-SQL Tuesday started by Adam Machanic (blog|twitter) and hosted by someone else each month. This month the host is Sankar Reddy (blog|twitter) and the topic is Misconceptions in SQL Server. You can follow posts for this theme on Twitter by looking at #TSQL2sDay hashtag. Let me start by saying: This code is a crazy hack that is to never be used unless you really, really have to. Really! And I don’t think there’s a time when you would really have to use it for real. Because it’s a hack there are number of things that can go wrong so play with it knowing that. I’ve managed to totally corrupt one database. :) Oh… and for those saying: yeah yeah.. you have a single table in a file group and you’re restoring that, I say “nay nay” to you. As we all know SQL Server can’t do single table restores from backup. This is kind of a obvious thing due to different relational integrity (RI) concerns. Since we have to maintain that we have to restore all tables represented in a RI graph. For this exercise i say BAH! to those concerns. Note that this method “works” only for simple tables that don’t have LOB and off rows data. The code can be expanded to include those but I’ve tried to leave things “simple”. Note that for this to work our table needs to be relatively static data-wise. This doesn’t work for OLTP table. Products are a perfect example of static data. They don’t change much between backups, pretty much everything depends on them and their table is one of those tables that are relatively easy to accidentally delete everything from. This only works if the database is in Full or Bulk-Logged recovery mode for tables where the contents have been deleted or truncated but NOT when a table was dropped. Everything we’ll talk about has to be done before the data pages are reused for other purposes. After deletion or truncation the pages are marked as reusable so you have to act fast. The best thing probably is to put the database into single user mode ASAP while you’re performing this procedure and return it to multi user after you’re done. How do we do it? We will be using an undocumented but known DBCC commands: DBCC PAGE, an undocumented function sys.fn_dblog and a little known DATABASE RESTORE PAGE option. All tests will be on a copy of Production.Product table in AdventureWorks database called Production.Product1 because the original table has FK constraints that prevent us from truncating it for testing. -- create a duplicate table. This doesn't preserve indexes!SELECT *INTO AdventureWorks.Production.Product1FROM AdventureWorks.Production.Product After we run this code take a full back to perform further testing. First let’s see what the difference between DELETE and TRUNCATE is when it comes to logging. With DELETE every row deletion is logged in the transaction log. With TRUNCATE only whole data page deallocations are logged in the transaction log. Getting deleted data pages is simple. All we have to look for is row delete entry in the sys.fn_dblog output. But getting data pages that were truncated from the transaction log presents a bit of an interesting problem. I will not go into depths of IAM(Index Allocation Map) and PFS (Page Free Space) pages but suffice to say that every IAM page has intervals that tell us which data pages are allocated for a table and which aren’t. If we deep dive into the sys.fn_dblog output we can see that once you truncate a table all the pages in all the intervals are deallocated and this is shown in the PFS page transaction log entry as deallocation of pages. For every 8 pages in the same extent there is one PFS page row in the transaction log. This row holds information about all 8 pages in CSV format which means we can get to this data with some parsing. A great help for parsing this stuff is Peter Debetta’s handy function dbo.HexStrToVarBin that converts hexadecimal string into a varbinary value that can be easily converted to integer tus giving us a readable page number. The shortened (columns removed) sys.fn_dblog output for a PFS page with CSV data for 1 extent (8 data pages) looks like this: -- [Page ID] is displayed in hex format. -- To convert it to readable int we'll use dbo.HexStrToVarBin function found at -- http://sqlblog.com/blogs/peter_debetta/archive/2007/03/09/t-sql-convert-hex-string-to-varbinary.aspx -- This function must be installed in the master databaseSELECT Context, AllocUnitName, [Page ID], DescriptionFROM sys.fn_dblog(NULL, NULL)WHERE [Current LSN] = '00000031:00000a46:007d' The pages at the end marked with 0x00—> are pages that are allocated in the extent but are not part of a table. We can inspect the raw content of each data page with a DBCC PAGE command: -- we need this trace flag to redirect output to the query window.DBCC TRACEON (3604); -- WITH TABLERESULTS gives us data in table format instead of message format-- we use format option 3 because it's the easiest to read and manipulate further onDBCC PAGE (AdventureWorks, 1, 613, 3) WITH TABLERESULTS Since the DBACC PAGE output can be quite extensive I won’t put it here. You can see an example of it in the link at the beginning of this section. Getting deleted data back When we run a delete statement every row to be deleted is marked as a ghost record. A background process periodically cleans up those rows. A huge misconception is that the data is actually removed. It’s not. Only the pointers to the rows are removed while the data itself is still on the data page. We just can’t access it with normal means. To get those pointers back we need to restore every deleted page using the RESTORE PAGE option mentioned above. This restore must be done from a full backup, followed by any differential and log backups that you may have. This is necessary to bring the pages up to the same point in time as the rest of the data. However the restore doesn’t magically connect the restored page back to the original table. It simply replaces the current page with the one from the backup. After the restore we use the DBCC PAGE to read data directly from all data pages and insert that data into a temporary table. To finish the RESTORE PAGE procedure we finally have to take a tail log backup (simple backup of the transaction log) and restore it back. We can now insert data from the temporary table to our original table by hand. Getting truncated data back When we run a truncate the truncated data pages aren’t touched at all. Even the pointers to rows stay unchanged. Because of this getting data back from truncated table is simple. we just have to find out which pages belonged to our table and use DBCC PAGE to read data off of them. No restore is necessary. Turns out that the problems we had with finding the data pages is alleviated by not having to do a RESTORE PAGE procedure. Stop stalling… show me The Code! This is the code for getting back deleted and truncated data back. It’s commented in all the right places so don’t be afraid to take a closer look. Make sure you have a full backup before trying this out. Also I suggest that the last step of backing and restoring the tail log is performed by hand. USE masterGOIF OBJECT_ID('dbo.HexStrToVarBin') IS NULL RAISERROR ('No dbo.HexStrToVarBin installed. Go to http://sqlblog.com/blogs/peter_debetta/archive/2007/03/09/t-sql-convert-hex-string-to-varbinary.aspx and install it in master database' , 18, 1) SET NOCOUNT ONBEGIN TRY DECLARE @dbName VARCHAR(1000), @schemaName VARCHAR(1000), @tableName VARCHAR(1000), @fullBackupName VARCHAR(1000), @undeletedTableName VARCHAR(1000), @sql VARCHAR(MAX), @tableWasTruncated bit; /* THE FIRST LINE ARE OUR INPUT PARAMETERS In this case we're trying to recover Production.Product1 table in AdventureWorks database. My full backup of AdventureWorks database is at e:\AW.bak */ SELECT @dbName = 'AdventureWorks', @schemaName = 'Production', @tableName = 'Product1', @fullBackupName = 'e:\AW.bak', @undeletedTableName = '##' + @tableName + '_Undeleted', @tableWasTruncated = 0, -- copy the structure from original table to a temp table that we'll fill with restored data @sql = 'IF OBJECT_ID(''tempdb..' + @undeletedTableName + ''') IS NOT NULL DROP TABLE ' + @undeletedTableName + ' SELECT *' + ' INTO ' + @undeletedTableName + ' FROM [' + @dbName + '].[' + @schemaName + '].[' + @tableName + ']' + ' WHERE 1 = 0' EXEC (@sql) IF OBJECT_ID('tempdb..#PagesToRestore') IS NOT NULL DROP TABLE #PagesToRestore /* FIND DATA PAGES WE NEED TO RESTORE*/ CREATE TABLE #PagesToRestore ([ID] INT IDENTITY(1,1), [FileID] INT, [PageID] INT, [SQLtoExec] VARCHAR(1000)) -- DBCC PACE statement to run later RAISERROR ('Looking for deleted pages...', 10, 1) -- use T-LOG direct read to get deleted data pages INSERT INTO #PagesToRestore([FileID], [PageID], [SQLtoExec]) EXEC('USE [' + @dbName + '];SELECT FileID, PageID, ''DBCC TRACEON (3604); DBCC PAGE ([' + @dbName + '], '' + FileID + '', '' + PageID + '', 3) WITH TABLERESULTS'' as SQLToExecFROM (SELECT DISTINCT LEFT([Page ID], 4) AS FileID, CONVERT(VARCHAR(100), ' + 'CONVERT(INT, master.dbo.HexStrToVarBin(SUBSTRING([Page ID], 6, 20)))) AS PageIDFROM sys.fn_dblog(NULL, NULL)WHERE AllocUnitName LIKE ''%' + @schemaName + '.' + @tableName + '%'' ' + 'AND Context IN (''LCX_MARK_AS_GHOST'', ''LCX_HEAP'') AND Operation in (''LOP_DELETE_ROWS''))t');SELECT *FROM #PagesToRestore -- if upper EXEC returns 0 rows it means the table was truncated so find truncated pages IF (SELECT COUNT(*) FROM #PagesToRestore) = 0 BEGIN RAISERROR ('No deleted pages found. Looking for truncated pages...', 10, 1) -- use T-LOG read to get truncated data pages INSERT INTO #PagesToRestore([FileID], [PageID], [SQLtoExec]) -- dark magic happens here -- because truncation simply deallocates pages we have to find out which pages were deallocated. -- we can find this out by looking at the PFS page row's Description column. -- for every deallocated extent the Description has a CSV of 8 pages in that extent. -- then it's just a matter of parsing it. -- we also remove the pages in the extent that weren't allocated to the table itself -- marked with '0x00-->00' EXEC ('USE [' + @dbName + '];DECLARE @truncatedPages TABLE(DeallocatedPages VARCHAR(8000), IsMultipleDeallocs BIT);INSERT INTO @truncatedPagesSELECT REPLACE(REPLACE(Description, ''Deallocated '', ''Y''), ''0x00-->00 '', ''N'') + '';'' AS DeallocatedPages, CHARINDEX('';'', Description) AS IsMultipleDeallocsFROM (SELECT DISTINCT LEFT([Page ID], 4) AS FileID, CONVERT(VARCHAR(100), CONVERT(INT, master.dbo.HexStrToVarBin(SUBSTRING([Page ID], 6, 20)))) AS PageID, DescriptionFROM sys.fn_dblog(NULL, NULL)WHERE Context IN (''LCX_PFS'') AND Description LIKE ''Deallocated%'' AND AllocUnitName LIKE ''%' + @schemaName + '.' + @tableName + '%'') t;SELECT FileID, PageID , ''DBCC TRACEON (3604); DBCC PAGE ([' + @dbName + '], '' + FileID + '', '' + PageID + '', 3) WITH TABLERESULTS'' as SQLToExecFROM (SELECT LEFT(PageAndFile, 1) as WasPageAllocatedToTable , SUBSTRING(PageAndFile, 2, CHARINDEX('':'', PageAndFile) - 2 ) as FileID , CONVERT(VARCHAR(100), CONVERT(INT, master.dbo.HexStrToVarBin(SUBSTRING(PageAndFile, CHARINDEX('':'', PageAndFile) + 1, LEN(PageAndFile))))) as PageIDFROM ( SELECT SUBSTRING(DeallocatedPages, delimPosStart, delimPosEnd - delimPosStart) as PageAndFile, IsMultipleDeallocs FROM ( SELECT *, CHARINDEX('';'', DeallocatedPages)*(N-1) + 1 AS delimPosStart, CHARINDEX('';'', DeallocatedPages)*N AS delimPosEnd FROM @truncatedPages t1 CROSS APPLY (SELECT TOP (case when t1.IsMultipleDeallocs = 1 then 8 else 1 end) ROW_NUMBER() OVER(ORDER BY number) as N FROM master..spt_values) t2 )t)t)tWHERE WasPageAllocatedToTable = ''Y''') SELECT @tableWasTruncated = 1 END DECLARE @lastID INT, @pagesCount INT SELECT @lastID = 1, @pagesCount = COUNT(*) FROM #PagesToRestore SELECT @sql = 'Number of pages to restore: ' + CONVERT(VARCHAR(10), @pagesCount) IF @pagesCount = 0 RAISERROR ('No data pages to restore.', 18, 1) ELSE RAISERROR (@sql, 10, 1) -- If the table was truncated we'll read the data directly from data pages without restoring from backup IF @tableWasTruncated = 0 BEGIN -- RESTORE DATA PAGES FROM FULL BACKUP IN BATCHES OF 200 WHILE @lastID <= @pagesCount BEGIN -- create CSV string of pages to restore SELECT @sql = STUFF((SELECT ',' + CONVERT(VARCHAR(100), FileID) + ':' + CONVERT(VARCHAR(100), PageID) FROM #PagesToRestore WHERE ID BETWEEN @lastID AND @lastID + 200 ORDER BY ID FOR XML PATH('')), 1, 1, '') SELECT @sql = 'RESTORE DATABASE [' + @dbName + '] PAGE = ''' + @sql + ''' FROM DISK = ''' + @fullBackupName + '''' RAISERROR ('Starting RESTORE command:' , 10, 1) WITH NOWAIT; RAISERROR (@sql , 10, 1) WITH NOWAIT; EXEC(@sql); RAISERROR ('Restore DONE' , 10, 1) WITH NOWAIT; SELECT @lastID = @lastID + 200 END /* If you have any differential or transaction log backups you should restore them here to bring the previously restored data pages up to date */ END DECLARE @dbccSinglePage TABLE ( [ParentObject] NVARCHAR(500), [Object] NVARCHAR(500), [Field] NVARCHAR(500), [VALUE] NVARCHAR(MAX) ) DECLARE @cols NVARCHAR(MAX), @paramDefinition NVARCHAR(500), @SQLtoExec VARCHAR(1000), @FileID VARCHAR(100), @PageID VARCHAR(100), @i INT = 1 -- Get deleted table columns from information_schema view -- Need sp_executeSQL because database name can't be passed in as variable SELECT @cols = 'select @cols = STUFF((SELECT '', ['' + COLUMN_NAME + '']''FROM ' + @dbName + '.INFORMATION_SCHEMA.COLUMNSWHERE TABLE_NAME = ''' + @tableName + ''' AND TABLE_SCHEMA = ''' + @schemaName + '''ORDER BY ORDINAL_POSITIONFOR XML PATH('''')), 1, 2, '''')', @paramDefinition = N'@cols nvarchar(max) OUTPUT' EXECUTE sp_executesql @cols, @paramDefinition, @cols = @cols OUTPUT -- Loop through all the restored data pages, -- read data from them and insert them into temp table -- which you can then insert into the orignial deleted table DECLARE dbccPageCursor CURSOR GLOBAL FORWARD_ONLY FOR SELECT [FileID], [PageID], [SQLtoExec] FROM #PagesToRestore ORDER BY [FileID], [PageID] OPEN dbccPageCursor; FETCH NEXT FROM dbccPageCursor INTO @FileID, @PageID, @SQLtoExec; WHILE @@FETCH_STATUS = 0 BEGIN RAISERROR ('---------------------------------------------', 10, 1) WITH NOWAIT; SELECT @sql = 'Loop iteration: ' + CONVERT(VARCHAR(10), @i); RAISERROR (@sql, 10, 1) WITH NOWAIT; SELECT @sql = 'Running: ' + @SQLtoExec RAISERROR (@sql, 10, 1) WITH NOWAIT; -- if something goes wrong with DBCC execution or data gathering, skip it but print error BEGIN TRY INSERT INTO @dbccSinglePage EXEC (@SQLtoExec) -- make the data insert magic happen here IF (SELECT CONVERT(BIGINT, [VALUE]) FROM @dbccSinglePage WHERE [Field] LIKE '%Metadata: ObjectId%') = OBJECT_ID('['+@dbName+'].['+@schemaName +'].['+@tableName+']') BEGIN DELETE @dbccSinglePage WHERE NOT ([ParentObject] LIKE 'Slot % Offset %' AND [Object] LIKE 'Slot % Column %') SELECT @sql = 'USE tempdb; ' + 'IF (OBJECTPROPERTY(object_id(''' + @undeletedTableName + '''), ''TableHasIdentity'') = 1) ' + 'SET IDENTITY_INSERT ' + @undeletedTableName + ' ON; ' + 'INSERT INTO ' + @undeletedTableName + '(' + @cols + ') ' + STUFF((SELECT ' UNION ALL SELECT ' + STUFF((SELECT ', ' + CASE WHEN VALUE = '[NULL]' THEN 'NULL' ELSE '''' + [VALUE] + '''' END FROM ( -- the unicorn help here to correctly set ordinal numbers of columns in a data page -- it's turning STRING order into INT order (1,10,11,2,21 into 1,2,..10,11...21) SELECT [ParentObject], [Object], Field, VALUE, RIGHT('00000' + O1, 6) AS ParentObjectOrder, RIGHT('00000' + REVERSE(LEFT(O2, CHARINDEX(' ', O2)-1)), 6) AS ObjectOrder FROM ( SELECT [ParentObject], [Object], Field, VALUE, REPLACE(LEFT([ParentObject], CHARINDEX('Offset', [ParentObject])-1), 'Slot ', '') AS O1, REVERSE(LEFT([Object], CHARINDEX('Offset ', [Object])-2)) AS O2 FROM @dbccSinglePage WHERE t.ParentObject = ParentObject )t)t ORDER BY ParentObjectOrder, ObjectOrder FOR XML PATH('')), 1, 2, '') FROM @dbccSinglePage t GROUP BY ParentObject FOR XML PATH('') ), 1, 11, '') + ';' RAISERROR (@sql, 10, 1) WITH NOWAIT; EXEC (@sql) END END TRY BEGIN CATCH SELECT @sql = 'ERROR!!!' + CHAR(10) + CHAR(13) + 'ErrorNumber: ' + ERROR_NUMBER() + '; ErrorMessage' + ERROR_MESSAGE() + CHAR(10) + CHAR(13) + 'FileID: ' + @FileID + '; PageID: ' + @PageID RAISERROR (@sql, 10, 1) WITH NOWAIT; END CATCH DELETE @dbccSinglePage SELECT @sql = 'Pages left to process: ' + CONVERT(VARCHAR(10), @pagesCount - @i) + CHAR(10) + CHAR(13) + CHAR(10) + CHAR(13) + CHAR(10) + CHAR(13), @i = @i+1 RAISERROR (@sql, 10, 1) WITH NOWAIT; FETCH NEXT FROM dbccPageCursor INTO @FileID, @PageID, @SQLtoExec; END CLOSE dbccPageCursor; DEALLOCATE dbccPageCursor; EXEC ('SELECT ''' + @undeletedTableName + ''' as TableName; SELECT * FROM ' + @undeletedTableName)END TRYBEGIN CATCH SELECT ERROR_NUMBER() AS ErrorNumber, ERROR_MESSAGE() AS ErrorMessage IF CURSOR_STATUS ('global', 'dbccPageCursor') >= 0 BEGIN CLOSE dbccPageCursor; DEALLOCATE dbccPageCursor; ENDEND CATCH-- if the table was deleted we need to finish the restore page sequenceIF @tableWasTruncated = 0BEGIN -- take a log tail backup and then restore it to complete page restore process DECLARE @currentDate VARCHAR(30) SELECT @currentDate = CONVERT(VARCHAR(30), GETDATE(), 112) RAISERROR ('Starting Log Tail backup to c:\Temp ...', 10, 1) WITH NOWAIT; PRINT ('BACKUP LOG [' + @dbName + '] TO DISK = ''c:\Temp\' + @dbName + '_TailLogBackup_' + @currentDate + '.trn''') EXEC ('BACKUP LOG [' + @dbName + '] TO DISK = ''c:\Temp\' + @dbName + '_TailLogBackup_' + @currentDate + '.trn''') RAISERROR ('Log Tail backup done.', 10, 1) WITH NOWAIT; RAISERROR ('Starting Log Tail restore from c:\Temp ...', 10, 1) WITH NOWAIT; PRINT ('RESTORE LOG [' + @dbName + '] FROM DISK = ''c:\Temp\' + @dbName + '_TailLogBackup_' + @currentDate + '.trn''') EXEC ('RESTORE LOG [' + @dbName + '] FROM DISK = ''c:\Temp\' + @dbName + '_TailLogBackup_' + @currentDate + '.trn''') RAISERROR ('Log Tail restore done.', 10, 1) WITH NOWAIT;END-- The last step is manual. Insert data from our temporary table to the original deleted table The misconception here is that you can do a single table restore properly in SQL Server. You can't. But with little experimentation you can get pretty close to it. One way to possible remove a dependency on a backup to retrieve deleted pages is to quickly run a similar script to the upper one that gets data directly from data pages while the rows are still marked as ghost records. It could be done if we could beat the ghost record cleanup task.

Search Results

Search found 32364 results on 1295 pages for 'null layout manager'.

Page 226/1295 | < Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233 | Next Page >

- by welovedesign

- by Hello

- by Michael DePetrillo

- by TasostheGreat

- by Christopher House

- by pinaldave

- by kyle.hatlestad

- by Fat Bloke

- by Elke Phelps (Oracle Development)

- by Asian Angel

- by swafbrother

- by Irina

- by mustafakaya

- by PCat

- by Kevin Brown

- by robalot

- by xsl

- by Master

- by Dylan Bourque

- by Shaun

- by Rick Strahl

- by James Michael Hare

- by Trevor Bekolay

- by Nick Harrison

- by Mladen Prajdic

< Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233 | Next Page >