Search Results

Search found 13151 results on 527 pages for 'performance counters'.

Page 226/527 | < Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >

  • Very slow write access to SSD disks on some Asus P8Z77 motherboards

    - by lenik
    I have Asus P8Z77-V LK motherboard, that ran Mint 13 (based on Ubuntu 12.04) just perfectly, but recently I've tried to install Mint 17 and noticed abysmal write performance. Write speed on SSD disk was about 1.5MB/sec, when it's supposed to be in 150-250MB/sec range. For write testing I've used dd if=/dev/zero of=/dev/sda bs=10M count=10 while booted up from LiveCD. I have also tested the read speed with hdparm -tT /dev/sda and got about 440MB/sec -- that's normal. I can tell, the read performance has not degraded at all and is not an issue here. Since I had a few different SSD disks and few motherboards, I've tested and tested and here are results: Asus P8H77 works fine with Mint13, has very slow write speed starting from Mint14. Asus P8Z77-V LK works with Mint13, has very slow write speed starting from Mint14. Asus P8Z77-V PRO works with Mint13, and works just fine with Mint14, 15, 16 and 17. The only difference between "PRO" version and others is that it has extra SATA controller onboard (in addition to the Z77 chipset SATA controller) providing extra 2 SATA ports. SSD disks work fine with "PRO" version when connected to the native SATA ports as well as to the ports provided by extra SATA controller, so this does not look like a hardware issue. As far as I can tell, there's something changed in the kernel while going from 3.2 to 3.5, that affects the detection of onboard SATA controller for Asus P8*77 motherboards, that screws up the write speed for SSD drives. Could anyone shed some light on how to fix this issue or, possibly, give a pointer to a more suitable place to ask this question?

    Read the article

  • format/build raid 5 with one 4k drive, three 512b

    - by skidawgz
    I have 4 WD 1TB drives which I want to 4x1TB Raid5. I am not sure what course of action to take next. How do I configure my 4th drive (sde) to align with the rest? Will this affect performance? I rcv this msg (which brings me here to ask these question): The device presents a logical sector size that is smaller than the physical sector size. Aligning to a physical sector (or optimal I/O) size boundary is recommended, or performance may be impacted. fdisk -l shows: Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf324ba09 Device Boot Start End Blocks Id System /dev/sdb1 2048 1953525167 976761560 fd Linux raid autodetect Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x38bcc1f0 Device Boot Start End Blocks Id System /dev/sdc1 2048 1953525167 976761560 fd Linux raid autodetect Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x570f77e7 Device Boot Start End Blocks Id System /dev/sdd1 2048 1953525167 976761560 fd Linux raid autodetect Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xeb665e7b Device Boot Start End Blocks Id System

    Read the article

  • Linux to Solaris @ Morgan Stanley

    - by mgerdts
    I came across this blog entry and the accompanying presentation by Robert Milkoski about his experience switching from Linux to Oracle Solaris 11 for a distributed OpenAFS file serving environment at Morgan Stanley. If you are an IT manager, the presentation will show you: Running Solaris with a support contract can cost less than running Linux (even without a support contract) because of technical advantages of Solaris. IT departments can benefit from hiring computer scientists into Systems Programmer or similar roles.  Their computer science background should be nurtured so that they can continue to deliver value (savings and opportunity) to the business as technology advances. If you are a sysadmin, developer, or somewhere in between, the presentation will show you: A presentation that explains your technical analysis can be very influential. Learning and using the non-default options of an OS can make all the difference as to whether one OS is better suited than another.  For example, see the graphs on slides 3 - 5.  The ZFS default is to not use compression. When trying to convince those that hold the purse strings that your technical direction should be taken, the financial impact can be the part that closes the deal.  See slides 6, 9, and 10.  Sometimes reducing rack space requirements can be the biggest impact because it may stave off or completely eliminate the need for facilities growth. DTrace can be used to shine light on performance problems that may be suspected but not diagnosed.  It is quite likely that these problems have existed in OpenAFS for a decade or more.  DTrace made diagnosis possible. DTrace can be used to create performance analysis tools without modifying the source of software that is under analysis.  See slides 29 - 32. Microstate accounting, visible in the prstat output on slide 37 can be used to quickly draw focus to problem areas that affect CPU saturation.  Note that prstat without -m gives a time-decayed moving average that is not nearly as useful. Instruction level probes (slides 33 - 34) are a super-easy way to identify which part of a function is hot.

    Read the article

  • Oracle SPARC SuperCluster and US DoD Security guidelines

    - by user12611852
    I've worked in the past to help our government customers understand how best to secure Solaris.  For my customer base that means complying with Security Technical Implementation Guides (STIGs) from the Defense Information Systems Agency (DISA).  I recently worked with a team to apply both the Solaris and Oracle 11gR2 database STIGs to a SPARC SuperCluster.  The results have been published in an Oracle White paper. The SPARC SuperCluster is a highly available, high performance platform that incorporates: SPARC T4-4 servers Exadata Storage Servers and software ZFS Storage appliance InfiniBand interconnect Flash Cache  Oracle Solaris 11 Oracle VM for SPARC Oracle Database 11gR2 It is targeted towards large, mission critical database, middleware and general purpose workloads.  Using the Oracle Solution Center we configured a SSC applied DoD security guidance and confirmed functionality and performance of the system.  The white paper reviews our findings and includes a number of security recommendations.  In addition, customers can contact me for the itemized spreadsheets with our detailed STIG reports. Some notes: There is no DISA STIG  documentation for Solaris 11.  Oracle is working to help DISA create one using their new process. As a result, our report follows the Solaris 10 STIG document and applies it to Solaris 11 where applicable. In my conversations over the years with DISA Field Security Office they have repeatedly told me, "The absence of a DISA written STIG should not prevent a product from being used.  Customer may apply vendor or industry security recommendations to receive accreditation." Thanks to the core team: Kevin Rohan, Gary Jensen and Rich Qualls as well as the staff of the Oracle Solution Center and Glenn Brunette for their help in creating the document.

    Read the article

  • SQLAuthority News – BI Quiz Question – How to Optimize Cube? – Hints

    - by pinaldave
    I earlier wrote about SQL BI Quiz over here. The details of the quiz is as following: Working with huge data is very common when it is about Data Warehousing. It is necessary to create Cubes on the data to make it meaningful and consumable. There are cases when retrieving the data from cube takes lots of the time. Let us assume that your cube is returning you data very quickly. Suddenly on one day it is returning the data very slowly. What are the three things will you to diagnose this. After diagnose what you will do to resolve performance issue. Participate in my question over here Here is a couple of hints what I am looking for in answer: How to reach to root of slow performance? Is hardware causing the problem or something else? Is slowness is due to how cube is build and its granularity? Is underlying tables require maintenance? Is there is chance to refractor the process? Are there any tool which can help diagnosis the slowness of the cube? It is not necessary to answer all the question – but something to start with. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Oracle nomeada pela Forrester Leader em Enterprise Business Intelligence Platforms

    - by Paulo Folgado
    According to an October 2010 report from independent analyst firm Forrester Research, Inc., Oracle is a leader in enterprise business intelligence (BI) platforms. Forrester Research defines BI as a set of methodologies, processes, architectures, and technologies that transform raw data into meaningful and useful information, which can then be used to enable more effective strategic, tactical, and operational insights and decision-making. Written by Forrester vice president and principal analyst Boris Evelson, The Forrester Wave: Enterprise Business Intelligence Platforms, Q4 2010 states that "Oracle has built new metadata-level [Oracle Business Intelligence Enterprise Edition 11g] integration with Oracle Fusion Middleware and Oracle Fusion Applications and continues to differentiate with its versatile ROLAP engine." The report goes on, "And in addition to closing some gaps it had in 10.x versions such as lack of RIA functionality, [the Oracle Business Intelligence Enterprise Edition 11g] actually leapfrogs the competition with the Common Enterprise Information Model (CEIM)--including the ability to define actions and execute processes right from BI metadata across BI and ERP applications." "We're pleased that the Forrester Wave recognizes Oracle Business Intelligence as a leading enterprise BI platform," said Paul Rodwick, vice president of product management, Oracle Business Intelligence. Key Innovations in Oracle Business Intelligence 11g Released in August 2010, Oracle Business Intelligence 11g represents the industry's most complete, integrated, and scalable suite of BI products. Encompassing thousands of new features and enhancements, the latest release offers three key areas of innovations. * A unified environment. The industry's first unified environment for accessing and analyzing data across relational, OLAP, and XML data sources. * Enhanced usability. A new, integrated scorecard application, plus innovations in reporting, visualization, search, and collaboration. * Enhanced performance, scalability, and security. Deeper integration with Oracle Enterprise Manager 11g and other components of Oracle Fusion Middleware provide lower management costs and increased performance, scalability, and security. Read the entire Forrester Wave Report.

    Read the article

  • Webcast - Set Your Sights on Enterprise 2.0 in the Cloud

    - by [email protected]
    To gain a competitive edge in your market, you need your business processes to be more collaborative, agile, and flexible to meet growing business demands. How can you make that happen? One way is to deploy portal, content management, and Enterprise 2.0 capabilities on a cloud infrastructure. According to top industry analysts, Enterprise 2.0 and cloud computing are two of the top three CIO initiatives in 2010. What are some of the advantages associated with deploying your Enterprise 2.0 initiatives in a cloud environment? Learn about the security, performance, and flexibility benefits that are available to you. Watch our complimentary live Webcast, Cloud Computing and Enterprise 2.0--Gain a Competitive Advantage, to get the answers you're looking for. Find out how Oracle pioneered the highly scalable and highly secure solutions that will enable you to: Quickly deploy on a cloud computing infrastructure that can scale as projects go viral Accelerate business processes, such as new product introduction, customer service, and new employee on-boarding Take advantage of best practices in cloud computing and Enterprise 2.0 implementations Join us for this LIVE webcast tomorrow as we show you how to achieve a higher level of performance and flexibility with Enterprise 2.0 and cloud computing. Register today for the live Webcast.

    Read the article

  • ArchBeat Link-o-Rama for 2012-06-01

    - by Bob Rhubart
    Complexity of Social Computing - Is it a Consideration for EA's? | Pat Shepherd blogs.oracle.com Pat Shepherd asks, "Does Enterprise Architecture need to consider Social Computing in its scope?" Who should own the Enterprise Architecture? | Michael Glas blogs.oracle.com "Instead of looking at just who owns the architecture," suggests Michael Glas, "think about what the person/role/organization should do." The Application Architecture Domain | Michael Glas blogs.oracle.com Michael Glas asks—and answers: "As an Enterprise Architect, what do I need to consider when looking at/defining/designing the Application Architecture Domain?" CAP Twelve Years Later: How the "Rules" Have Changed | Eric Brewer www.infoq.com The CAP theorem asserts that any net­worked shared-data system can have only two of three desirable properties. How­ever, by explicitly handling partitions, designers can optimize consistency and availability, thereby achieving some trade-off of all three. Oracle DB with OEM in Amazon Cloud | Dr. Frank Munz www.munzandmore.com Dr. Frank Munz shares a video that screencast that explains "how to create an Oracle DB instance in AWS, how to enable OEM...and how to connect to your cloud instance with a local installation of NetBeans." Sample External Login.jsp page for Oracle Access Manager 11g | Brian Eidelman fusionsecurity.blogspot.com A-Team blogger Brian Eidelman expands on a previous post dealing with configuring OAM 11g to use an externally hosted custom login page. Bay Area Coherence Special Interest Group (BACSIG) Meeting June 7 coherence.oracle.com Date: Thursday, June 7, 2012 Time: 5:30pm – 9:00pm PT Where: Oracle Conference Center Room # 103 350 Oracle Parkway Redwood, Shores, CA Presentations: 6:00 p.m. - Coherence 101, The Evolution of Distributed Caching - Noah Arliss (Oracle) 7:00 p.m. - Optimizing Performance for Oracle Coherence and TopLink Grid at OOCL - Matt Rosen, Leo Limqueco (OOCL) 8:00 p.m. - Oracle Coherence Message Bus - Extreme Performance on Oracle Exalogic - Ballav Bihani (Oracle) Thought for the Day "I can't be left unsupervised." — Ron Wood (Born 06/01/1947 Source: Brainy Quote

    Read the article

  • Best Persistence choice for J2EE-App with frequently changing Data Model

    - by Ben-G
    Whenever I develop a J2EE-Application, I at some point decide to switch from my dummy Persistence (Simply Using Lists and other Data Structures) to some Sort of Database Persistence. Mostly when I hope the Data Model is more or less complete. From this point on, changes to the data model become exhausting, but unluckily they occur rather often. I've used different Object-Relational-Mappers (iBatis, Hibernate) for my projects. They definitely reduce the pain coming with Data Model changes, but they anyway let me adjust code/configuration at 3 or 4 places for every single change. To me, that's cumbersome and error prone. I made a better experience with DB4O, which simply persists Java Objects as they are, but I believe it's performance does not scale for huge applications. Is there anyway to maintain performance while letting out all the ugly configuration work? I'm seeking a performant framework which really hides persistence from my code. Wish for thinking? Or am I missing out THE technology? Hope you can help.

    Read the article

  • Exalytics Increases Customer Revenue, and Saves Time, Risk & Cost

    - by Mike.Hallett(at)Oracle-BI&EPM
    We are getting some great proof point stories now from our customers who are succeeding with the Exalytics in-memory system for OBI and Essbase.  See below for some recent testimony: San Diego Unified School District Harnesses Attendance, Procurement, and Operational Data with Oracle Exalytics, Generating $4.4 Million in Savings: according to independent assessment by Mainstay Salire, the district is on track to achieve substantial benefits from the Oracle Exalytics solution, including an $8.25 million increase in attendance revenue, $75,000 a year savings in operational efficiencies, and $1 million in hardware cost avoidance. NilsonGroup chooses Oracle Exalytics In-Memory Machine as their solution to access critical data to keep its stores competitive with real-time Mobile BI: it took only “3 days to get up and running” with Exalytics.  Video Nykredit, in the Danish Financial Sector, describes their experiences from testing the Exalytics Business Intelligence Machine: “it was up and running within 4 days” with “more intuitive dashboards” and “up to 70x better performance” and “cheaper maintenance and lower total cost of ownership”. Video Sodexo chose Oracle Exalytics as their business analytics platform; accelerating Essbase “more than 8x” performance for more than 2,000 Excel-addin users, “significantly changing how people in information management now deal with data”.  Video Polk, Savvis, Nykredit, and Key Energy describe testing of the Oracle Exalytics In-Memory Machine: to “reach more users than we ever have before”, “to fly through the data without impeding the analytic process”, “drive our enterprise groups into this tool instead of having departmental solutions”, and the “advanced visualisation this product enables”.  Video

    Read the article

  • links for 2011-02-14

    - by Bob Rhubart
    Glenn Fawcett: Solaris Eye for the Linux Guy, or how I learned to stop worrying about Linux and Love Solaris (Part 1) Glenn says: "This entry goes out to my Oracle techie friends that have been in the Linux camp for sometime now and are suddenly finding themselves needing to know more about Solaris… hmmmm… I wonder if this has anything to do with Solaris now being an available option with Exadata?"  (tags: linux solaris oracle) Enterprise Software Development with Java: High Performance JPA with GlassFish and Coherence - Part 2 Oracle ACE Director Markus Eisele describes "the steps you have to take to configure a JPA backed Cache with Coherence and how you could use it from within GlassFish as a high performance data store." (tags: oracle otn oracleace java glassfish coherence) TOGAF a Registered Trademark and Surpasses 15k Certifications EA Blogs Mike Walker relays news on the TOGAF standard. (tags: entarch togaf) Weblogic or wait? | Capping IT Off | Capgemini "So when would you move over to the new Oracle Technology?" asks Arjan Kramer. " Well, as always there can be several reasons..." (tags: oracle capgemini weblogic) Random Monday Thoughs (Art of SOA Governance) "Governance is what insurance is to new cars, be it to SOA, IT transformations and software development. Governance is a insurance policy against risk of failure." - Terry Goldman (tags: oracle otn soa soagovernance)

    Read the article

  • Best ways to collect location-based user input

    - by user359650
    I'm working on a website where users will be able to register and provide information about their location. In order to prevent users from inputting incorrect data, we don't want users to provide free-text information but instead choose from predefined values as much as possible. We believe there are 2 ways of providing those values: use an API to an external service provider or create your own local database. APIs Some resources: - https://developers.facebook.com/docs/reference/ads-api/get-autocomplete-data/ - http://developer.yahoo.com/geo/geoplanet/ Pros: -accuracy and completeness of data. -no maintenance related to update of data as this it taken care of by API provider. -easier/faster to get started (no need to create local database, just implement API). Cons: -degradation of performance when availability issues with external API. -outage due to changes to the external API (until your code is updated to reflect those changes). -lock-in with external provider. Local database Some resources: - http://developer.yahoo.com/geo/geoplanet/data/ - http://www.maxmind.com/app/geolitecity - http://download.geonames.org/export/dump/ Pros: -no external dependency: improved stability and performance. Cons: -more work to get started (you need to create the database and code to interact with it). -risks of inaccurate/incomplete data, either initially or over time. -more maintenance work to keep database up to date. Assuming the depth information requested from users is as follows: -country: interested in value. also used to narrow down list of regions. -region (state in the US, county in the UK...): not interested in value itself, only used to narrow down list of cities. -city: interested in value (which can be used to work out related region should we need regional statistics). -address: interested in value although OPTIONAL. Which option (whether API or local database) would you choose? What tips you would give for the implementation? What other resources can you share?

    Read the article

  • Which toolkit to use for 3D MMO game development?

    - by Ahmet Yildirim
    Lately i've been thinking about which path to follow for developing an 3D Online game. I have googled a lot but i couldnt find a good article that covers both game development and online server & client development in same context. This question has been in mind for about 2 weeks now. So.. yesterday i started developing a game from scratch by using Irrlicht.Net Wrapper to use Socket library of .NET which im already familiar. But i found out .Net wrapper of Irrlicht is not totally finished yet and still have lacks from the original. So i lost all my motives :/. So i thought why not to ask the experts before i run into another dead end... What Game Engine and Networking Library is best way to go for 3D MMO Development? Here is some of my early conclusions: Please let me know the ones im wrong. C++: Best Performance for 3D Graphics. Most Game Engines has native C++ Libraries. Lacks a Solid Socket Library .NETC++ Lacks Intellisense Support. C#: Intellisense Support NET Socket Library Lacks 3D Graphics Performance Lacks a native solid 3D Game Engine

    Read the article

  • Is '@' Error Suppression a Valid Technique for Testing for an Optional Array Key?

    - by MikeSchinkel
    Rarst and I were debating offline about the use of the '@' error suppression operator in PHP, specifically for use to test for existence of "optional" array keys, i.e. array keys that are being used as a switch here a their lack of existence in the array is functionally equivalent to the array having the key with a value equaling false. Here is pseudo-code for this scenario: function do_something( $args = array() ) { if ( @$args['switch'] ) { // Do something with this switch } // continue on... } vs. this approach: function do_something( $args = array() ) { if ( ! empty( $args['switch'] ) && $args['switch'] ) { // Do something with this switch } // continue on... } Of course in most use-cases, suppressing errors would not be A Good Thing(tm). However in this use-case where an array is passed with an optional element, it seems to me that it is actually a very good technique but I could be wrong and would like to hear other's opinions on the subject before I make up my mind. I do know that there are alleged performance hits for using the former approach but I'd like to know how they compare with the alternative and if they performance hits really matter in real world scenarios? P.S. I decided to post this because, after debating this offline with Rarst, he asked a more general question here on Programmers but didn't actually give a detailed example of the specific use-case we were debating. And since I'm pretty sure he'll want to use the out-of-context answers on that other question as justification for why the above is "bad" I decided I needed to get opinions on this specific use-case.

    Read the article

  • Attend my Tech Ed 2014 session: Debugging Tips and Tricks

    - by Daniel Moth
    Just a week away, at Tech Ed 2014 NA in Houston Texas, I will be giving a demo presentation that you will not want to miss (assuming you code in Visual Studio). Add it to your calendar now: DEV-B352 Debugging Tips and Tricks in Visual Studio 2013 (link) Monday, May 12 1:15-2:30 PM, Room: General Assembly C As a developer, regardless of your programming language or the platform that you target, you use the debugger on a daily basis. Come to this all-demo session to learn how to make the most of the Visual Studio debugger, and hence be more productive and effective in your everyday development. We tour almost all of the debugger surface and many of its commands, throwing in tips and tricks as we go along, and also calling out what is brand new in the latest version of the debugger in Microsoft Visual Studio 2013. Whatever your experience level, you are guaranteed to leave with new knowledge of debugger features that you will want to use immediately when you are back at your computer!   I am also co-presenting another session later in the week. DEV-B313 Diagnosing Issues in Windows Phone 8.1 XAML Applications Using Visual Studio 2013 (link) Thursday, May 15 10:15-11:30 AM, Room: 340 Come to this demo-driven session to learn how to use the latest diagnostic tools in Visual Studio 2013 to make your Windows Phone 8.1 XAML apps reliable, fast, and efficient. Learn how to make the most of existing capabilities in the debugger as well as new debugging features for diagnosing correctness issues. Also, see the Visual Studio Performance and Diagnostics hub in action with its performance analysis tools for diagnosing CPU usage, memory usage, and energy consumption. The techniques covered in this session apply equally well for Windows Store apps as well as Windows Phone Store apps, so all your device development needs will be covered.   Links to both sessions from my Tech Ed speaker page. See you there! Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • Leveraging ERP Investments with EPM and BI Solutions

    - by john.orourke(at)oracle.com
    Now that many organizations have implemented ERP systems to automate and integrate their operational processes, IT investments are beginning to shift to the management systems i.e. EPM and BI tools and applications that integrate data from multiple transactional systems.  These solutions automate and integrate the management processes and enable organizations to achieve "management excellence" becoming smarter, more agile and more aligned than their competitors.  In fact the results of a recent IDC survey indicate that "Organizations that have implemented performance management more broadly are nearly four times more likely to be among the most competitive organizations in their industry."  One example of an organization that is leveraging their ERP investments with Oracle EPM and BI solutions is General Dynamics.  The Business Intelligence Collaborative (BIC) group within General Dynamics' IT organization assists various business units with the implementation, application support, and application hosting for their Business Intelligence and Enterprise Performance Management Applications.  Attend the Oracle Virtual Trade Show "Spotlight on Customer Success" on February 3rd to hear the details of how General Dynamics is using Oracle Essbase, Hyperion Planning, and Oracle BI to improve their planning, reporting and analysis processes and leverage their investments in Oracle E-Business Suite and other operational systems.   During the event, you can also hear about the latest developments and plans for Oracle Applications products, as well as what's coming with Oracle Fusion Applications. Here's a link to the Virtual Trade Show event overview and registration page.  The event runs from 8AM - 1PM PST/11AM - 4PM EST, and the EPM session is 10:30 - 11AM PST/1:30 - 2PM EST.    http://event.on24.com/event/26/79/15/rt/opFb.html?partnerref=internal I hope you'll join us on February 3rd!  

    Read the article

  • Interfaces and Virtuals Everywhere????

    - by David V. Corbin
    First a disclaimer; this post is about micro-optimization of C# programs and does not apply to most common scenarios - but when it does, it is important to know. Many developers are in the habit of declaring member virtual to allow for future expansion or using interface based designs1. Few of these developers think about what the runtime performance impact of this decision is. A simple test will show that this decision can have a serious impact. For our purposes, we used a simple loop to time the execution of 1 billion calls to both non-virtual and virtual implementations of a method that took no parameters and had a void return type: Direct Call:     1.5uS Virtual Call:   13.0uS The overhead of the call increased by nearly an order of magnitude! Once again, it is important to realize that if the method does anything of significance then this ratio drops quite quickly. If the method does just 1mS of work, then the differential only accounts for a 1% decrease in performance. Additionally the method in question must be called thousands of times in order to produce a meaqsurable impact at the application level. Yet let us consider a situation such as the per-pixel processing of a graphics processing application. Here we may have a method which is called millions of times and even the slightest increase in overhead can have significant ramification. In this case using either explicit virtuals or interface based constructs is likely to be a mistake. In conclusion, good design principles should always be the driving force behind descisions such as these; but remember that these decisions do not come for free.   1) When a concrete class member implements an interface it does not need to be explicitly marked as virtual (unless, of course, it is to be overriden in a derived concerete class). Nevertheless, when accessed via the interface it behaves exactly as if it had been marked as virtual.

    Read the article

  • MDX needs a function or macro syntax

    - by Darren Gosbell
    I was having an interesting discussion with a few people about the impact of named sets on performance (the same discussion noted by Chris Webb here: http://cwebbbi.wordpress.com/2011/03/16/referencing-named-sets-in-calculations). And apparently the core of the performance issue comes down to the way named sets are materialized within the SSAS engine. Which lead me to the thought that what we really need is a syntax for declaring a non-materialized set or to take this even further a way of declaring an MDX expression as function or macro so that it can be re-used in multiple places. Because sometimes you do want the set materialised, such as when you use an ordered set for calculating rankings. But a lot of the time we just want to make our MDX modular and want to avoid having to repeat the same code over and over. I did some searches on connect and could not find any similar suggestions so I posted one here: https://connect.microsoft.com/SQLServer/feedback/details/651646/mdx-macro-or-function-syntax Although apparently I did not search quite hard enough as Chris Webb made a similar suggestion some time ago, although he also included a request for true MDX stored procedures (not the .Net style stored procs that we have at the moment): https://connect.microsoft.com/SQLServer/feedback/details/473694/create-parameterised-queries-and-functions-on-the-server Chris also pointed out this post that he did last year http://cwebbbi.wordpress.com/2010/09/13/iccube/ where he pointed out that the icCube product already has this sort of functionality. So if you think either or both of these suggestions is a good idea then I would encourage you to click on the links and vote for them.

    Read the article

  • Mal kurz erklärt: Advanced Security Option (ASO)

    - by Anne Manke
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Heinz-Wilhelm Fabry 12.00 Normal 0 false false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0cm; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Heinz-Wilhelm Fabry 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0cm; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} WER? Kunden, die die Oracle Datenbank Enterprise Edition einsetzen und deren Sicherheitsabteilungen bzw. Fachabteilungen die Daten- und/oder Netzwerkverschlüsselung fordern und / oder die personenbezogene Daten in Oracle Datenbanken speichern und / oder die den Zugang zu Datenbanksystemen von der Eingabe Benutzername/Passwort auf Smartcards oder Kerberos umstellen wollen. Heinz-Wilhelm Fabry 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0cm; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} WAS? Durch das Aktivieren der Option Advanced Security können folgende Anforderungen leicht erfüllt werden: Einzelne Tabellenspalten gezielt verschlüsselt ablegen, wenn beispielsweise der Payment Card Industry Data Security Standard (PCI DSS) oder der Europäischen Datenschutzrichtlinie eine Verschlüsselung bestimmter Daten nahelegen Sichere Datenablage – Verschlüsselung aller Anwendungsdaten Keine spürbare Performance-Veränderung Datensicherungen sind automatisch verschlüsselt - Datendiebstahl aus Backups wird verhindert Verschlüsselung der Netzwerkübertragung – Sniffer-Tools können keine lesbaren Daten abgreifen Aktuelle Verschlüsselungsalgorithmen werden genutzt (AES256, 3DES168, u.a.) Heinz-Wilhelm Fabry 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0cm; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} WIE? Die Oracle Advanced Security Option ist ein wichtiger Baustein einer ganzheitlichen Sicherheitsarchitektur. Mit ihr lässt sich das Risiko eines Datenmissbrauchs erheblich reduzieren und implementiert ebenfalls den Schutz vor Nicht-DB-Benutzer, wie „root unter Unix“. Somit kann „root“ nicht mehr unerlaubterweise die Datenbank-Files lesen . ASO deckt den kompletten physikalischen Stack ab. Von der Kommunikation zwischen dem Client und der Datenbank, über das verschlüsselte Ablegen der Daten ins Dateisystem bis hin zur Aufbewahrung der Daten in einem Backupsystem. Heinz-Wilhelm Fabry 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0cm; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Das BVA (Bundesverwaltungsamt) bietet seinen Kunden mit dem neuen Personalverwaltungssystem EPOS 2.0 mehr Sicherheit durch Oracle Sicherheitstechnologien an. Heinz-Wilhelm Fabry 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0cm; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Und sonst so? Verschlüsselung des Netzwerkverkehrs Wie beeinflusst die Netzwerkverschlüsselung die Performance? Unsere Kunden bestätigen ständig, dass sie besonders in modernen Mehr-Schichten-Architekturen Anwender kaum Performance-Einbußen feststellen. Falls genauere Daten zur Performance benötigt werden, sind realitätsnahe, kundenspezifische Tests unerlässlich. Verschlüsselung von Anwendungsdaten (Transparent Data Encryption-TDE ) Muss ich meine Anwendungen umschreiben, damit sie TDE nutzen können? NEIN. TDE ist völlig transparent für Ihre Anwendungen. Kann ich nicht auch durch meine Applikation die Daten verschlüsseln? Ja - die Applikationsdaten werden dadurch allerdings nur in LOBs oder Textfeldern gespeichert. Und das hat gravierende Nachteile: Es existieren zum Beispiel keine Datums- /Zahlenfelder. Daraus folgt, dass auf diesen Daten kein sinnvolles Berichtsverfahren funktioniert. Auch können Applikationen nicht mit den Daten arbeiten, die von einer anderen Applikation verschlüsselt wurden. Der wichtigste Aspekt gegen die Verschlüsselung innerhalb einer Applikation ist allerdings die Performanz. Da keine Indizes auf die durch eine Applikation verschlüsselten Daten erstellt werden können, wird die Datenbank bei jedem Zugriff ein Full-Table-Scan durchführen, also jeden Satz der betroffenen Tabelle lesen. Dadurch steigt der Ressourcenbedarf möglicherweise enorm und daraus resultieren wiederum möglicherweise höhere Lizenzkosten. Mit ASO verschlüsselte Daten können von der Oracle DB Firewall gelesen und ausgewertet werden. Warum sollte ich TDE nutzen statt einer kompletten Festplattenverschlüsselung? TDE bietet einen weitergehenden Schutz. Denn TDE schützt auch vor Systemadministratoren, die zwar keinen Zugriff auf die Datenbank, aber auf der Betriebssystemebene Zugriff auf die Datenbankdateien haben. Ausserdem bleiben einmal verschlüsselte Daten verschlüsselt, egal wo diese hinkopiert werden. Dies ist bei einer Festplattenverschlüssung nicht der Fall. Welche Verschlüsselungsalgorithmen stehen zur Verfügung? AES (256-, 192-, 128-bit key) 3DES (3-key)

    Read the article

  • Full Portfolio of x86 Systems On Display at Oracle OpenWorld

    - by kgee
    This OpenWorld, Oracle’s x86 hardware team will have two hardware demos, showcasing the new X3 systems, as well as several other x86 solutions such as the ZFS Storage Appliance, Oracle Database Appliance and the Carrier Grade NETRA systems. These two demos are located in the South Hall in Oracle’s booth 1133 and Intel’s booth 1101.  The Intel booth will feature additional demos including 3D demos of each server, a static architectural demo, the Oracle x86 Grand Prix video game and the Intel Theatre featuring several presentations by Intel’s partners. Oracle’s Intel Theatre Schedule and Topics Include:Monday 1. 10:30 a.m. - Engineered to Work Together: Oracle x86 Systems in the Data Center2. 12:30 a.m. - The Oracle NoSQL Database on the Intel Platform.3. 1:30 p.m. - Accelerate Your Path to Cloud with Oracle VM4. 3:30 p.m. - Why Oracle Linux is the Best Linux for Your Intel Based Systems5. 4:30 p.m. - Accelerate Your Path to Cloud with Oracle VMTuesday 1. 10:00 a.m. - Speed of thought” Analytics using In-Memory Analytics2. 1:30 a.m. - A Storage Architecture for Big Data:  "It’s Not JUST Hadoop"3. 2:00 a.m. - Oracle Optimized Solution for Enterprise Cloud Infrastructure.4. 2:30 p.m. - Configuring Storage to Optimize Database Performance and Efficiency.5. 3:30 p.m. - Total Cloud Control for Oracle's x86 SystemsWednesday 1. 10:00 a.m. - Big Data Analysis Using R-Programming Language2. 11:30 a.m. - Extreme Performance Overview, The Oracle Exadata Database Machine3. 1:30 p.m. - Oracle Times Ten In-Memory Database Overview

    Read the article

  • Skanska Builds Global Workforce Insight with Cloud-Based HCM System

    - by HCM-Oracle
    By David Baum - Originally posted on Profit Peter Bjork grew up building things. He started his work life learning all sorts of trades at his father’s construction company in the northern part of Sweden. So in college, it was natural for him to pursue a bachelor’s degree in construction engineering—but he broke new ground when he added a master’s degree in finance to his curriculum vitae. Written on a traditional résumé, Bjork’s current title (vice president of information systems strategies) doesn’t reveal the diversity of his experience—that he’s adept with hammer and nails as well as rows and columns. But a big part of his current job is to work with his counterparts in human resources (HR) designing, building, and deploying the systems needed to get a complete view of the skills and potential of Skanska’s 22,000-strong white-collar workforce. And Bjork believes that complete view is essential to Skanska’s success. “Our business is really all about people,” says Bjork, who has worked with Skanska for 16 years. “You can have equipment and financial resources, but to truly succeed in a business like ours you need to have the right people in the right places. That’s what this system is helping us accomplish.” In a global HR environment that suffers from a paradox of high unemployment and a scarcity of skilled labor, managers need to have a complete understanding of workforce capabilities to develop management skills, recruit for open positions, ensure that staff is getting the training they need, and reduce attrition. Skanska’s human capital management (HCM) systems, based on Oracle Talent Management Cloud, play a critical role delivering that understanding. “Skanska’s philosophy of having great people, encouraging their development, and giving them the chance to move across business units has nurtured a culture of collaboration, but managing a diverse workforce spread across the globe is a monumental challenge,” says Annika Lindholm, global human resources system owner in the HR department at Skanska’s headquarters just outside of Stockholm, Sweden. “We depend heavily on Oracle’s cloud technology to support our HCM function.” Construction, Workers For Skanska’s more than 60,000 employees and contractors, managing huge construction projects is an everyday job. Beyond erecting signature buildings, management’s goal is to build a corporate culture where valuable talent can be sought out and developed, bringing in the right mix of people to support and grow the business. “Of all the companies in our space, Skanska is probably one of the strongest ones, with a laser focus on people and people development,” notes Tom Crane, chief HR and communications officer for Skanska in the United States. “Our business looks like equipment and material, but all we really have at the end of the day are people and their intellectual capital. Without them, second only to clients, of course, you really can’t achieve great things in the high-profile environment in which we work.” During the 1990s, Skanska entered an expansive growth phase. A string of successful acquisitions paved the way for the company’s transformation into a global enterprise. “Today the company’s focus is on profitable growth,” continues Crane. “But you can’t really achieve growth unless you are doing a very good job of developing your people and having the right people in the right places and driving a culture of growth.” In the United States alone, Skanska has more than 8,000 employees in four distinct business units: Skanska USA Building, also known as the Construction Manager, builds everything at ground level and above—hospitals, educational facilities, stadiums, airport terminals, and other massive projects. Skanska USA Civil does everything at ground level and below, such as light rail, water treatment facilities, power plants or power industry facilities, highways, and bridges. Skanska Infrastructure Development develops public-private partnerships—projects in which Skanska adds equity and also arranges for outside financing. Skanska Commercial Development acts like a commercial real estate developer, acquiring land and building offices on spec or build-to-suit for its clients. Skanska's international portfolio includes construction of the new Meadowlands Stadium. Getting the various units to operate collaboratatively helps Skanska deliver high value to clients and shareholders. “When we have this collaboration among units, it allows us to enrich each of the business units and, at the same time, develop our future leaders to be more facile in operating across business units—more accepting of a ‘one Skanska’ approach,” explains Crane. Workforce Worldwide But HR needs processes and tools to support managers who face such business dynamics. Oracle Talent Management Cloud is helping Skanska implement world-class recruiting strategies and generate the insights needed to drive quality hiring practices, internal mobility, and a proactive approach to building talent pipelines. With their new cloud system in place, Skanska HR leaders can manage everything from recruiting, compensation, and goal and performance management to employee learning and talent review—all as part of a single, cohesive software-as-a-service (SaaS) environment. Skanska has successfully implemented two modules from Oracle Talent Management Cloud—the recruiting and performance management modules—and is in the process of implementing the learn module. Internally, they call the systems Skanska Recruit, Skanska Talent, and Skanska Learn. The timing is apropos. With high rates of unemployment in recent years, there have been many job candidates on the market. However, talent scarcity continues to frustrate recruiters. Oracle Taleo Recruiting Cloud Service, one of the applications in the Oracle Talent Management cloud portfolio, enables Skanska managers to create more-intelligent recruiting strategies, pulling high-performer profile statistics to create new candidate profiles and using multitiered screening and assessments to ensure that only the best-suited candidate applications make it to the recruiter’s desk. Tools such as applicant tracking, interview management, and requisition management help recruiters and hiring managers streamline the hiring process. Oracle’s cloud-based software system automates and streamlines many other HR processes for Skanska’s multinational organization and delivers insight into the success of recruiting and talent-management efforts. “The Oracle system is definitely helping us to construct global HR processes,” adds Bjork. “It is really important that we have a business model that is decentralized, so we can effectively serve our local markets, and interact with our global ERP [enterprise resource planning] systems as well. We would not be able to do this without a really good, well-integrated HCM system that could support these efforts.” A key piece of this effort is something Skanska has developed internally called the Skanska Leadership Profile. Core competencies, on which all employees are measured, are used in performance reviews to determine weak areas but also to discover talent, such as those who will be promoted or need succession plans. This global profiling system brings consistency to the way HR professionals evaluate and review talent across the company, with a consistent set of ratings and a consistent definition of competencies. All salaried employees in Skanska are tied to a talent management process that gives opportunity for midyear and year-end reviews. Using the performance management module, managers can align individual goals with corporate goals; provide clear visibility into how each employee contributes to the success of the organization; and drive a strategic, end-to-end talent management strategy with a single, integrated system for all talent-related activities. This is critical to a company that is highly focused on ensuring that every employee has a development plan linked to his or her succession potential. “Our approach all along has been to deploy software applications that are seamless to end users,” says Crane. “The beauty of a cloud-based system is that much of the functionality takes place behind the scenes so we can focus on making sure users can access the data when they need it. This model greatly improves their efficiency.” The employee profile not only sets a competency baseline for new employees but is also integrated with Skanska’s other back-office Oracle systems to ensure consistency in the way information is used to support other business functions. “Since we have about a dozen different HR systems that are providing us with information, we built a master database that collects all the information,” explains Lindholm. “That data is sent not only to Oracle Talent Management Cloud, but also to other systems that are dependent on this information.” Collaboration to Scale Skanska is poised to launch a new Oracle module to link employee learning plans to the review process and recruitment assessments. According to Crane, connecting these processes allows Skanska managers to see employees’ progress and produce an updated learning program. For example, as employees take classes, supervisors can consult the Oracle Talent Management Cloud portal to monitor progress and align it to each individual’s training and development plan. “That’s a pretty compelling solution for an organization that wants to manage its talent on a real-time basis and see how the training is working,” Crane says. Rolling out Oracle Talent Management Cloud was a joint effort among HR, IT, and a global group that oversaw the worldwide implementation. Skanska deployed the solution quickly across all markets at once. In the United States, for example, more than 35 offices quickly got up to speed on the new system via webinars for employees and face-to-face training for the HR group. “With any migration, there are moments when you hold your breath, but in this case, we had very few problems getting the system up and running,” says Crane. Lindholm adds, “There has been very little resistance to the system as users recognize its potential. Customizations are easy, and a lasting partnership has developed between Skanska and Oracle when help is needed. They listen to us.” Bjork elaborates on the implementation process from an IT perspective. “Deploying a SaaS system removes a lot of the complexity,” he says. “You can downsize the IT part and focus on the business part, which increases the probability of a successful implementation. If you want to scale the system, you make a quick phone call. That’s all it took recently when we added 4,000 users. We didn’t have to think about resizing the servers or hiring more IT people. Oracle does that for us, and they have provided very good support.” As a result, Skanska has been able to implement a single, cost-effective talent management solution across the organization to support its strategy to recruit and develop a world-class staff. Stakeholders are confident that they are providing the most efficient recruitment system possible for competent personnel at all levels within the company—from skilled workers at construction sites to top management at headquarters. And Skanska can retain skilled employees and ensure that they receive the development opportunities they need to grow and advance.

    Read the article

  • Requiring multithreading/concurrency for implementation of scripting language

    - by Ricky Stewart
    Here's the deal: I'm looking at designing my own scripting/interpreted language for fun. I'm only in the planning stages right now; I want to make sure I have a very strong hold on exactly how I will implement everything before I start coding. What I'm currently struggling with is concurrency. It seems to me like an easy way to avoid the unpredictable performance that comes with garbage collection would be to put the garbage collector in its own thread, and have it run concurrently with the interpreter itself. (To be clear, I don't plan to allow the scripts to be multithreaded themselves; I would simply put a garbage collector to work in a different thread than the interpreter.) This doesn't seem to be a common strategy for many popular scripting languages, probably for portability reasons; I would probably write the interpreter in the UNIX/POSIX threading framework initially and then port it to other platforms (Windows, etc.) if need be. Does anyone have any thoughts in this issue? Would whatever gains I receive by exploiting concurrency be nullified by the portability issues that will inevitably arise? (On that note, am I really correct in my assumption that I would experience great performance gains with a concurrent garbage collector?) Should I move forward with this strategy or step away from it?

    Read the article

  • Compiz slow under proprietary nvidia driver

    - by gsedej
    Hi! I am using Ubuntu 10.10 and have problem with proprietary nvidia driver for my GeForce GTS 250. I have issue with poor Compiz performance. And there is also open-source "noueau" driver. Proprietary: I tried many versions but neither works fast on desktop. This means 30 FPS without heavy effects. Currently I am using version 270.18. Even normal desktop use feels bad (moving windows) In games (and 3D benchmark) it is really good! (Unigine Heaven works good!) Open-source "nouveau": Very fast on desktop with heavy effects (blur, ...). I have 300 FPS and more, even in Expo mode. Games were good but not as good as prop. And driver causes xorg to crash even the latest (ppa:xorg-edgers/nouveau), so I switched back to proprietary. I also have computer with Ubuntu 10.04, GeForce 8600GT and drivers around 185.x and Compiz works great there. There is similar question Nvidia proprietary driver performance in 10.10 Which version of nvidia (prop) driver is fast in Compiz in Ubuntu 10.10? How do you install a specific version of nvidia driver? Is it the case that each newer driver works slower on compiz?

    Read the article

  • Hot Off the Press - Oracle Exadata: A Data Management Tipping Point

    - by kimberly.billings
    Advances in data-management architecture - including CPU, memory, storage, I/O, and the database - have been steady but piecemeal. In this report, Merv Adrian describes how Oracle Exadata not only provides the latest technology in each part of the data-management architecture, but also integrates them under the full control of one vendor with a unified approach to leveraging the full stack. He writes, "the real "secret sauce" of Oracle Exadata V2 is the way in which these technologies complement each other to deliver additional performance and scalability." Merv interviews two Exadata customers, Banco Transylvania and TUI Netherlands, and concludes that early indications are that Oracle Exadata is delivering on its promise of extreme performance and scalability. His recommendation to IT is to target corporate applications with the biggest potential for speed-based enhancement, and consider whether Oracle Exadata V2 can cost-effectively enable new ways to use these for competitive advantage. Read the full report. var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www."); document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E")); try { var pageTracker = _gat._getTracker("UA-13185312-1"); pageTracker._trackPageview(); } catch(err) {}

    Read the article

  • Technology Choice for a Client Application [on hold]

    - by AK_
    Not sure this is the right place to ask... I'm involved in the development of a new system, and now we are passing the demos stage. We need to build a proper client application. The platform we care most about is Windows, for now at least, but we would love to support other platforms, as long as it's free :-). Or at least very cheap. We anticipate two kinds of users: Occasional, coming mostly from the web. Professional, who would probably require more features, and better performance, and probably would prefer to see a native client. Our server exposes two APIs: A SOAP API, WCF behind the scenes, that supports 100% of the functionality. A small and very fast UDP + Binary API, that duplicates some of the functionality and is intended for the sake of performance for certain real-time scenarios. Our team is mostly proficient in .Net, C#, C++ development, and rather familiar with Web development (HTML, JavaScript). We are probably intending to develop two clients (for both user profiles), a web app, and a native app. Architecturally, we would like to have as many common components as possible. We would like to have several layers: Communication, Client Model, Client Logic, shared by both of the clients. We would also like to be able to add features to both clients when only the actual UI is a dual cost, and the rest is shared. We are looking at several technologies: WPF + Silverlight, Pure HTML, Flash / Flex (AIR?), Java (JavaFx?), and we are considering poking at WinRT(or whatever the proper name is). The question is which technology would you recommend and why? And which advantages or disadvantages will it have regarding our requirements?

    Read the article

< Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >