Search Results

Search found 12834 results on 514 pages for 'small wolf'.

Page 226/514 | < Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >

• Dial-in VPN Routing issue when on 192.168.x.x network range

  - by Ian

  I'm not an expert on networks but have a small office on the 192.168.x.x. range which is managed by a vigor (2800) router. I have enabled the VPN dial-in option on the router so I can get to the server on 192.168.1.100 which works fine from my macbook when i'm NOT on a local network with that is on the 192.168.x.x range. e.g. works fine when I tether over my Android smartphone but when I try & connect when on my home network, it connects, I can access the router (192.168.1.1) but cannot access 192.168.1.100 - traceroute doesn't hop via 192.168.1.1 I have enabled "send all traffic over VPN connection but again, not joy... Feels like the osx platform isn't routing the traffic out to the vpn endpoint as the destination address is on the local subnet but expect it would be. This work fine on a windows PC on the same home network. Any thoughts on what the issue could be?

  Read the article

• Refining an AutoHotkey script

  - by roy2012

  The purpose of this script is: The first two rows of hotkeys always effective. The remaining hotkeys work at NO TEXT INPUT Status only. In other words, when the small vertical lines are flashing anywhere on the screen and waiting for input text / digital, press zxasq, the effect is equal to the normal original letters. How can I do that? Rwin::^space AppsKey::^w CapsLock::MButton z::PgUp x::PgDn *a up::send {shift up}{ctrl up}{LButton up} *a:: GetKeyState, LButtonState, LButton ; if LButtonState = U ; send {shift down}{ctrl down}{LButton down} ; return *s up::send {shift up}{ctrl up}{RButton up} *s:: GetKeyState, RButtonState, RButton ; if RButtonState = U ; send {shift down}{ctrl down}{RButton down} ; return *q up::send {shift up}{ctrl up}{MButton up} *q:: GetKeyState, MButtonState, MButton ; if MButtonState = U ; send {shift down}{ctrl down}{MButton down} ; return

  Read the article

• How to debug high memory usage by registry?

  - by bkr

  I have a windows 2008 r2 server running ADFS2 and some web apps that is having issues with low memory. Digging around I found that the 5.5 GB were being used under Kernel Memory (paged). Further digging with Poolmon, I discovered that the majority of that (5GB+) was being used by CM - configuration manager. Also known as the registry. I'm really now sure how to tell why the registry is using so much memory however, or how to release it? Looking at the physical registry files they don't appear that large. EDIT #1 Using the powershell script @ http://jdhitsolutions.com/blog/2011/05/get-registry-size-and-age/ confirms what I saw looking at the physical registry files, that they're relatively small Computername : (removed) Status : OK CurrentSize : 67 MaximumSize : 2048 FreeSize : 1981 PercentFree : 96.728515625 Created : 4/1/2011 11:38:02 AM Age : 454.23:41:28.2540682

  Read the article

• How SSD hard drive affected speed of your website (asp.net/linq/ms sql database)

  - by Sergey Osypchuk

  I have a small database (<1G) But we have a lot of complex logi? in website and client complains on render time, which is 3-5 seconds. We are not google, and thousands of users a day is our dream, so size is not a problem, but speed is important. Can anybody share with experience with SSD drives for ASP.NET (MVC)/LINQ/MS SQL based application ? How you performance increased? UPDATE: this whitepaper states that it will be 20 times faster. http://www.texmemsys.com/files/f000174.pdf

  Read the article

• Shared storage for web cluster

  - by user52475

  Hi all! Have a big question about shared/clustered/distributed file system for storage. It will shared storage for shared web hosting (web files + maildir) and OpenVZ containers storage . Have any one working example of such system? The options are: Lustre GFS1/GFS2 - GFS2 - as I understand is EXPERIMENTAL... NFS This 3 systems which I consider for shared storage. Now I have storage with HW RAID 10 - 1TB. NFS - As I know there will be problem with locking? GFS/Lustre - problems when there will be a lot of small files , what is typical for hosting environment and problems with maildir.

  Read the article

• Accessing a shared folder using other credentials with Windows 7

  - by Nicolas Buduroi

  I was at a client office trying to connect to a shared drive on their network but was greeted by a "you do not have permission to access" error! Couldn't find any way to enter the required credentials as this message didn't had any other options. Tried to map the drive, selected the option to enter the correct credentials (with \\HOST\user) but it wouldn't work at all. The worst thing in all of this is that my coworker who is using OS X has been able to connect to that drive without any problem, he clicked on it, entered the credentials and could open the folder! The folder is shared by a Windows Small Business Server 2008 machine.

  Read the article

• Behaviour of nginx as proxy

  - by HD

  I'm testing nginx with different configurations to replace an architecture working with squid + apache. I know that I can use nginx to manage static requests and load balancing but I'm interested in one particular solution that I don't understand clearly: I'm using 2 nginx servers (balanced) with the proxy_pass setting to pass all requests to an apache server. When one client makes a request to the site one of the nginx servers process it and send it to the apache server. Now, how this behaviour could be an improvement to my system?, it seems that all requests are passing through apache and I don't see benefit at all. What happens when 100 simultaneous connections pass through nginx? The 100 connections will be going to the apache server or is some kind of internal behaviour that allows an small impact into apache?

  Read the article

• Remove Outlook 2007 Calendar from Calendars List

  - by nmuntz

  In our company, we use personal folders with Outlook 2007 and make it the default method of downloading messages to keep our mailbox size on the server side small. Under calendar view, i see both calendars, my personal folder one and my server one. How can I remove from the list of calendars my server one since I do not use that one and it only creates confusion and problems such as adding entries onto that one instead of the other or disabling one and not getting alarms? I tried googling on it and read there is a utility to do that but couldn't find the name of it. Thanks in advance for your help.

  Read the article

• Windows Server vs Sharing

  - by Mark Lawrence

  Not sure if this is the right place for this question. I have a friend that owns a small business running 3 local machines, that are connected to the internet, and a server that each local machine connects to. He has recently bought a newer server, and by server I mean a Windows Vista box. He wants to use this purely to store data that the 3 local machines can access, kind of like a glorified external hard drive. Im suggesting to fore-go the server option and simply setup sharing on the 'server' box. Interested in hearing any suggestions as to whether the server idea is preferable?

  Read the article

• Radiation from a UPS

  - by Erel Segal

  In our office, there are frequent eletric shortages that harm my desktop computer, so I wanted to install a UPS. However, my office-mates pointed me to papers talking about hazardous radiation from the UPS. The UPS manufacturers themselves recommend to put the UPS several meters away from humans, which is not possible because our office is small (the power is about 0.5 meters from us). As an alternative to UPS, my office-mates recommended that I switch to a laptop, which has a battery so it's immune to shortages. I have several questions: Is it true that the radiation from a laptop battery is lower than the radiation from a UPS? They do just the same thing - supply power using a battery! If the answer to 1 is yes - is there an alternative way to attach a battery, similar to a laptop battery, to a desktop computer? If the answer to 1 is no - how can I prove this to my office-mates, so that they let me use UPS?

  Read the article

• Shortcut to checkout Sharepoint documents?

  - by Benjotron

  I find myself in a lot of situations where I need to download the latest version of a document from sharepoint, or checkout a sharepoint document, make a small change, and then check the document back in. I find the website interface to be quite clunky for stuff like this, largely because I use firefox (bad with sharepoint) and keyboard launchers (instead of mousing around.) Is there anyway to make a shortcut I can just run to checkout a specific sharepoint document without going through the web browser? Am I better off using Colligo Contributor or similar software to accomplish this? Can anyone recommend any software Sharepoint clients?

  Read the article

• bridge to share WiFi internet connection over eth0

  - by rubo77

  In this script there is implemented that you create a mesh network and connect other machines to your device to serve an internet connection with dhcp: echo "starting bridge to share internet connection over eth0" ifconfig eth0 up promisc brctl addbr br-freifunk brctl addif br-freifunk bat0 brctl addif br-freifunk eth0 echo "internet starting, this may take some minutes due to latency..." echo "(use" echo "tail -f /var/log/syslog" echo "in another window for debugging)" echo echo dhclient br-freifunk echo "The error 'Rather than invoking init scripts through /etc/init.d...' can be ignored:" dhclient br-freifunk # without bridge: dhclient bat0 This works fine with the freifunk-mesh network. But how can I serve internet in a normal case? I would like to connect to any open Wifi I find with my network-manager or wicd (yes, with the graphical GUI) and then start a small script that creates a bridge to my network-out on my laptop I use Ubuntu and my networkcards are eth0 and wlan0

  Read the article

• Ways to do simple failover with one server and two IPs

  - by CrassHoppr

  The setup is one server (Windows 2008) at one location with two incoming connections. As the server has to interface with various on-site devices, and will have a small number of incoming connections, a data center is not an option, and instead cable/dsl connections must be used. The goal is that users visit https://service.site.com and are sent to either the primary IP address or a secondary IP if the primary is down. I've seen advice to use round robin DNS for this, but caching an IP for a downed interface is something I'd like to avoid. Is something like this possible with these constraints?

  Read the article

• Quickly translate a word from English

  - by licorna

  I'm always reading English, but I'm a Spanish native speaker (I'm working on my thesis). Sometimes I need to translate a word into Spanish, and what I do now is to open a new tab and go to Google Translate and then put the word into the input field. Just a quick translation, one word or a small phrase. I'm a Mac and Firefox user. Is there a better way to achieve this? I was thinking that maybe a dashboard widget would do the trick and I was looking for one. The other option is to install the Google Toolbar, but I really hate toolbars. I don't know, a good Firefox extension maybe?

  Read the article

• Chipset GPU causes a massive slowdown

  - by zyboxenterprises

  My AMD Radeon HD 7700 recently broke (fan stopped working and GPU overheated), and now I'm running on internal chipset graphics, and it causes a massive slowdown of the whole PC. I've changed the graphics memory from 32MB (minimum) to 256MB (highest), and it hasn't made any difference whatsoever. I'm using Windows Aero, and disabling it should have made a small difference, but it didn't; the whole PC is still slow. I know that it's not the computer build, because I built it myself, and it was a lot faster when it had the AMD Radeon HD 7700 in it, which is the reason why I believe it's the internal chipset graphics that are causing the problem. Is this behavior normal? I don't have the cash right now to go out and buy a new dedicated GPU. I'm using an ASRock N68C-GS FX motherboard with an AMD FX 4100 (overclocked to 4.3GHZ), with 4GB RAM. The overclock was an attempt to resolve this issue, and it isn't related to this issue that the integrated graphics is causing a slowdown.

  Read the article

• What free OS should I use on my VPS?

  - by earlz

  Hello, I looked a bit but didn't see any duplicate of this so my question is which free(open source) OS do you use on servers and why do you use that OS? Background I have a VPS at Linode. There is a broad range of options for which OS I can put on it including both 32 and 64bit OSs. I just use it to run my small blog and for hosting random files. It's very low traffic. I have been using 64bit Arch Linux on my VPS and though I love the OS for general usage, for a server the constant breakage is troublesome. So I'm considering trying something new and am looking for suggestions.

  Read the article

• Looking for a central image database and tagging system for a group of users

  - by jstarek

  I'm doing IT support for a small volunteer organisation who needs to centrally store and organize around 2500 photos. Can anyone here recommend a database or similar system which matches the following criteria: Intuitive to use for users with little computer experience Multi-user support, ideally with integration in our existing LDAP user directory Should have a web-interface Not a hosted solution like Picasa (because we have a rather slow internet connection with very slow upload) Should allow tagging of images, sorting by various criteria and storing copyright information If there are native GNOME and/or Windows clients for the tool, that would be a great benefit. Many thanks in advance!

  Read the article

• script to automatically test if a web site is available

  - by Xoundboy

  I'm a lone web developer with my own Centos VPS hosting a few small web sites for my clients. Today I discovered my httpd service had stopped (for no apparent reason - but that's another thread). I restarted it but now I need to find a way that I can be notified by email and/or SMS if it happens again - I don't like it when my client rings me to tell me their web site doesn't work! I know there are probably many different possibilities, including server monitoring software. I think all I really need is a script that I can run as a cron job from my dev host (which is permanently running in my office) that attempts to load a page from my production server and if it doesn't load within say 30 seconds then it sends me an email or SMS. I'm pretty rubbish at shell scripting, hence this question. Any suggestions would be gratefully appreciated, thanks to all you clever sysadmin guys and girls out there :)

  Read the article

• include all vim files in a folder

  - by queueoverflow

  For my .bashrc I have a lot of small snippet files in .config/bash, like 10-prompt.sh and so on. In my actual .bashrc, I just have the following: configdir="$HOME/.config/bash" for file in "$configdir"/*.sh do source "$file" done I'd like to do the same for my .vimrc, but I am not that confident in VimL that I could write that. How would the snippet for .vimrc look like that includes all the snippets in a given subfolder? Ideally, I'd like to make a .vim/rc/ folder where I can put my snippets into.

  Read the article

• How to configure mspaint on Windows Server 2008R2/ Win 7 to start up with 1-pixel canvas or auto-crop a pasted image?

  - by Fantomas

  I do a lot of screen print capturing, and I have just figured out how to use AutoHotKey to paste screen prints into MsPaint automatically. How to paste Print Screen on MS Paint automatically when press "PrtSc" button ? However, one small problem I have is that ... if I grabbed a screen with Alt-Prt Scr that is only 50x50 pixels, then there would be extra white margin around it, because MSPaint starts out with a larger canvas by default. How can I make it ALWAYS start with 1x1 instead?

  Read the article

• Putting servers inside a refrigerator? [closed]

  - by Muhammad Jamal Shaikh

  It could be a silly question, but I decided to go for it. I shall be buying 3 servers in the next few weeks to set up a small webfarm at my home. I am told by different people who work in server rooms, that I should keep my servers in an air conditioned room. Which is really expensive, because the temperature here in south asia is between 10 to 50 degrees C. Here comes the funny part: I have an extra fridge in my home, why shouldn't I put the servers inside that fridge? Benefits: I don't have to buy the air conditioner. I don't have to buy the rack mount for the servers. The electricity consumed by the fridge is much much less than AC. Give me your suggestions!

  Read the article

• Configure Postfix for outgoing mail

  - by Savvas Sopiadis

  I have the following scenario i must implement using Postfix (but don't know how to begin): Say we have a domain aaa.com which is hosted somewhere (this is already functioning without any problems). On this envirnoment there is already a Mail server though which we can send and receive mail (this mail server is limiting us to a very small number of emails/day). Now we have setup a VPS (virtual private server) on which we installed Postfix, which sole porpuse is to send emails on behalf of domain aaa.com. The Postfix server will be used by a program like Outlook to send the email. What configuration has to be done? (i 'm a bloody beginner in this field!) Thanks in advance

  Read the article

• Trigger ZFS dedup one-off scan/rededup

  - by Jake Wharton

  I have a ZFS filesystems which has been running for some time and I recently had the opportunity to upgrade it (finally!) to the latest ZFS version. Our data doesn't scream dedup but I firmly believe based on small tests that we could gain anywhere from 5-10% of our space back for free by utilizing it. I have enabled dedup on the filesystem and new files are slowly being dedupified but the majority (95%+) of our data already exists on the filesystem. Short of moving the data off-pool and then recopying it back, is there any way to trigger a dedup scan of existing data? It doesn't have to be asynchronous or live. (And FYI there isn't enough room on the pool to copy the entire filesystem to another and then just switch the mounts.)

  Read the article

• Encrypt EC2 API call

  - by Frank

  I have to host an AMI in the Amazon Marketplace. i need to get the type of instance, whenever some user launches the AMI., like if its small medium or large. based on that i need to make some changes in the AMI when its created. I can do this with Amazon API call, to get the instance type, but the problem is that the instances created with the AMI will be started by other users, and i cannot use my AWS Credentials in the Amazon API. Is there any way that i can create an anonymous readonly user to make only specific type of EC2 API Calls? Or can i encrypt my EC2 API credentials, so no one can use it?

  Read the article

• Why do some PDFs lag in Adobe Acrobat?

  - by Coldblackice

  I have a handful of PDFs open. One of them in particular is extremely laggy, almost to the point of being unreadable. When I scroll through its pages, it's almost like an extreme version of v-sync being turned off. Very choppy. Overall system resources are plentiful, and all of the other PDFs cruise up and down with no stuttering or problems. I've tried closing and reopening the problem PDF to no avail. It's a small PDF, only 3MB in size, with no graphics (only programming code snippets). Surely, it must be some type of problem with the specific PDF (I'll try opening it in another PDF-viewing program, rather than Acrobat X). Possible corruption? Could there be some type of GPU/hardware-acceleration intervening going on? I've never heard of such with PDF-viewing.

  Read the article

< Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >