Search Results

Search found 8440 results on 338 pages for 'wms implementation'.

Page 226/338 | < Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >

• Bay Area Coherence Special Interest Group Next Meeting July 21, 2011

  - by csoto

  Date: Thursday, July 21, 2011 Time: 4:30pm - 8:15pm ET (note that Parking at 475 Sansome Closes at 8:30pm) Where: Oracle Office, 475 Sansome Street, San Francisco, CA Google Map We will be providing snacks and beverages. Register! - Registration is required for building security. Presentation Line Up:? 5:10pm - Batch Processing Using Coherence in Oracle Group Policy Administration - Paul Cleary, Oracle Oracle Insurance Policy Administration (OIPA) is a flexible, rules-based policy administration solution that provides full record keeping for all policy lifecycle transactions. One component of OIPA is Cycle processing, which is the batch processing of pending insurance transactions. This presentation introduces OIPA and Cycle processing, describing the unique challenges of processing a high volume of transactions within strict time windows. It then reviews how OIPA uses Oracle Coherence and the Processing Pattern to meet these challenges, describing implementation specifics that highlight the simplicity and robustness of the Processing Pattern. 6:10pm - Secure, Optimize, and Load Balance Coherence with F5 - Chris Akker, F5 F5 Networks, Inc., the global leader in Application Delivery Networking, helps the world’s largest enterprises and service providers realize the full value of virtualization, cloud computing, and on-demand IT. Recently, F5 and Oracle partnered to deliver a novel solution that integrates Oracle Coherence 3.7 with F5 BIG-IP Local Traffic Manager (LTM). This session will introduce F5 and how you can leverage BIG-IP LTM to secure, optimize, and load balance application traffic generated from Coherence*Extend clients across any number of servers in a cluster and to hardware-accelerate CPU-intensive SSL encryption. 7:10pm - Using Oracle Coherence to Enable Database Partitioning and DC Level Fault Tolerance - Alexei Ragozin, Independent Consultant and Brian Oliver, Oracle Partitioning is a very powerful technique for scaling database centric applications. One tricky part of partitioned architecture is routing of requests to the right database. The routing layer (routing table) should know the right database instance for each attribute which may be used for routing (e.g. account id, login, email, etc): it should be fast, it should fault tolerant and it should scale. All the above makes Oracle Coherence a natural choice for implementing such routing tables in partitioned architectures. This presentation will cover synchronization of the grid with multiple databases, conflict resolution, cross cluster replication and other aspects related to implementing robust partitioned architecture. Additional Info:?? - Download Past Presentations: The presentations from the previous meetings of the BACSIG are available for download here. Click on the presentation titles to download the PDF files. - Join the Coherence online community on our Oracle Coherence Users Group on LinkedIn. - Contact BACSIG with any comments, questions, presentation proposals and content suggestions.

  Read the article

• Composite-like pattern and SRP violation

  - by jimmy_keen

  Recently I've noticed myself implementing pattern similar to the one described below. Starting with interface: public interface IUserProvider { User GetUser(UserData data); } GetUser method's pure job is to somehow return user (that would be an operation speaking in composite terms). There might be many implementations of IUserProvider, which all do the same thing - return user basing on input data. It doesn't really matter, as they are only leaves in composite terms and that's fairly simple. Now, my leaves are used by one own them all composite class, which at the moment follows this implementation: public interface IUserProviderComposite : IUserProvider { void RegisterProvider(Predicate<UserData> predicate, IUserProvider provider); } public class UserProviderComposite : IUserProviderComposite { public User GetUser(SomeUserData data) ... public void RegisterProvider(Predicate<UserData> predicate, IUserProvider provider) ... } Idea behind UserProviderComposite is simple. You register providers, and this class acts as a reusable entry-point. When calling GetUser, it will use whatever registered provider matches predicate for requested user data (if that helps, it stores key-value map of predicates and providers internally). Now, what confuses me is whether RegisterProvider method (brings to mind composite's add operation) should be a part of that class. It kind of expands its responsibilities from providing user to also managing providers collection. As far as my understanding goes, this violates Single Responsibility Principle... or am I wrong here? I thought about extracting register part into separate entity and inject it to the composite. As long as it looks decent on paper (in terms of SRP), it feels bit awkward because: I would be essentially injecting Dictionary (or other key-value map) ...or silly wrapper around it, doing nothing more than adding entires This won't be following composite anymore (as add won't be part of composite) What exactly is the presented pattern called? Composite felt natural to compare it with, but I realize it's not exactly the one however nothing else rings any bells. Which approach would you take - stick with SRP or stick with "composite"/pattern? Or is the design here flawed and given the problem this can be done in a better way?

  Read the article

• How to recover from finite-state-machine breakdown?

  - by Earl Grey

  My question may seems very scientific but I think it's a common problem and seasoned developers and programmers hopefully will have some advice to avoid the problem I mention in title. Btw., what I describe bellow is a real problem I am trying to proactively solve in my iOS project, I want to avoid it at all cost. By finite state machine I mean this I have a UI with a few buttons, several session states relevant to that UI and what this UI represents, I have some data which values are partly displayed in the UI, I receive and handle some external triggers (represented by callbacks from sensors). I made state diagrams to better map the relevant scenarios that are desirable and alowable in that UI and application. As I slowly implement the code, the app starts to behave more and more like it should. However, I am not very confident that it is robust enough. My doubts come from watching my own thinking and implementation process as it goes. I was confident that I had everything covered, but it was enough to make a few brute tests in the UI and I quickly realized that there are still gaps in the behavior ..I patched them. However, as each component depends and behaves based on input from some other component, a certain input from user or some external source trigers a chain of events, state changes..etc. I have several components and each behave like this Trigger received on input - trigger and its sender analyzed - output something (a message, a state change) based on analysis The problem is, this is not completely selfcontained, and my components (a database item, a session state, some button's state)...COULD be changed, influenced, deleted, or otherwise modified, outside the scope of the event-chain or desirable scenario. (phone crashes, battery is empty phone turn of suddenly) This will introduce a nonvalid situation into the system, from which the system potentially COULD NOT BE ABLE to recover. I see this (althought people do not realize this is the problem) in many of my competitors apps that are on apple store, customers write things like this "I added three documents, and after going there and there, i cannot open them, even if a see them." or "I recorded videos everyday, but after recording a too log video, I cannot turn of captions on them.., and the button for captions doesn't work".. These are just shortened examples, customers often describe it in more detail..from the descriptions and behavior described in them, I assume that the particular app has a FSM breakdown. So the ultimate question is how can I avoid this, and how to protect the system from blocking itself? EDIT I am talking in the context of one viewcontroller's view on the phone, I mean one part of the application. I Understand the MVC pattern, I have separate modules for distinct functionality..everything I describe is relevant to one canvas on the UI.

  Read the article

• CRM vs VRM

  - by David Dorf

  In a previous post, I discussed the potential power of combining social, interest, and location graphs in order to personalize marketing and shopping experiences for consumers.  Marketing companies have been trying to collect detailed information for that very purpose, a large majority of which comes from tracking people on the internet.  But their approaches stem from the one-way nature of traditional advertising.  With TV, radio, and magazines there is no opportunity to truly connect to customers, which has trained marketing companies to [covertly] collect data and segment customers into easily identifiable groups.  To a large extent, we think of this as CRM. But what if we turned this viewpoint upside-down to accommodate for the two-way nature of social media?  The notion of marketing as conversations was the basis for the Cluetrain, an early attempt at drawing attention to the fact that customers are actually unique humans.  A more practical implementation is Project VRM, which is a reverse CRM of sorts.  Instead of vendors managing their relationships with customers, customers manage their relationships with vendors. Your shopping experience is not really controlled by you; rather, its controlled by the retailer and advertisers.  And unfortunately, they typically don't give you a say in the matter.  Yes, they might tailor the content for "female age 25-35 interested in shoes" but that's not really the essence of you, is it?  A better approach is to the let consumers volunteer information about themselves.  And why wouldn't they if it means a better, more relevant shopping experience?  I'd gladly list out my likes and dislikes in exchange for getting rid of all those annoying cookies on my harddrive. I really like this diagram from Beyond SocialCRM as it captures the differences between CRM and VRM. The closest thing to VRM I can find is Buyosphere, a start-up that allows consumers to track their shopping history across many vendors, then share it appropriately.  Also, Amazon does a pretty good job allowing its customers to edit their profile, which includes everything you've ever purchased from Amazon.  You can mark items as gifts, or explicitly exclude them from their recommendation engine.  This is a win-win for both the consumer and retailer. So here is my plea to retailers: Instead of trying to infer my interests from snapshots of my day, please just ask me.  We'll both have a better experience in the long-run.

  Read the article

• A Generic Boolean Value Converter

  - by codingbloke

  On fairly regular intervals a question on Stackoverflow like this one:  Silverlight Bind to inverse of boolean property value appears.  The same answers also regularly appear.  They all involve an implementation of IValueConverter and basically include the same boilerplate code. The required output type sometimes varies, other examples that have passed by are Boolean to Brush and Boolean to String conversions.  Yet the code remains pretty much the same.  There is therefore a good case to create a generic Boolean to value converter to contain this common code and then just specialise it for use in Xaml. Here is the basic converter:- BoolToValueConverter using System; using System.Windows.Data; namespace SilverlightApplication1 {     public class BoolToValueConverter<T> : IValueConverter     {         public T FalseValue { get; set; }         public T TrueValue { get; set; }         public object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture)         {             if (value == null)                 return FalseValue;             else                 return (bool)value ? TrueValue : FalseValue;         }         public object ConvertBack(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture)         {             return value.Equals(TrueValue);         }     } } With this generic converter in place it easy to create a set of converters for various types.  For example here are all the converters mentioned so far:- Value Converters using System; using System.Windows; using System.Windows.Media; namespace SilverlightApplication1 {     public class BoolToStringConverter : BoolToValueConverter<String> { }     public class BoolToBrushConverter : BoolToValueConverter<Brush> { }     public class BoolToVisibilityConverter : BoolToValueConverter<Visibility> { }     public class BoolToObjectConverter : BoolToValueConverter<Object> { } } With the specialised converters created they can be specified in a Resources property on a user control like this:- <local:BoolToBrushConverter x:Key="Highlighter" FalseValue="Transparent" TrueValue="Yellow" /> <local:BoolToStringConverter x:Key="CYesNo" FalseValue="No" TrueValue="Yes" /> <local:BoolToVisibilityConverter x:Key="InverseVisibility" TrueValue="Collapsed" FalseValue="Visible" />

  Read the article

• Oracle SOA Partner Community Forum Lisbon, Portugal &ndash; April 21st 2010

  - by Jürgen Kress

  We would like to invite you to attend our SOA Partner Community Forum that will be in held in Lisbon, April 21, 2010 The Oracle SOA Partner Community Forum is a wonderful opportunity to: Meet with Oracle SOA and BPM Product management Exchange thoughts and knowledge with SOA and BPM experts Learn from successful SOA implementation Network within the Oracle SOA Partner Community During this highly informative event you can learn about partner success stories, participate in an array of breakout sessions, exchange information with other partners and enjoy a vibrant panel discussion. Places are limited, so register today. Registration only takes a few minutes and it is free of charge. By registration you will confirm that you will attend to the event. Seminar is free. In the event that you cancel your registration after April 16th 2010 Oracle may request that you will pay late cancellation fee of € 150. Please visit our website for further information. Alternatively, if you require assistance or have any queries please contact Jürgen Kress. Agenda 10:00     Welcome & Introduction 10:15     SOA Cloud presentation 11:15     SOA Partner Sales Campaign 12:30     Lunch break 13:15     Partner Reference Case 14:15     BPMN 2.0 15:00     Cocktail reception   Location: Lagoas Park Hotel 2740-245, Porto Salvo, Oeiras For partners with BPM 11g opportunities we will offer an advanced workshop on Thursday April 22nd and Friday April 23rd hosted by Clemens Utschig-Utschig. If you are interested please contact Jürgen Kress.   Quotes from previous SOA Partner Community Forums "The SOA Partner Community Forum was a first-rate event that provided a balanced agenda of vendor-specific and vendor-neutral content pertaining to modern-day service-oriented computing technologies and practices. I enjoyed the opportunity to provide an objective voice on the topics I consider most important for today's IT practitioners to fully leverage the many patterns, principles, and service technology innovations that comprise the next-generation SOA platform." Thomas Erl, SOA Systems Inc., SOASchool.com “The Community is an excellent forum for Partners to hear about each others success stories on SOA, especially BPEL and ODI” Jørn F. Schurink, Competence Expert Oracle Technologies Logica “The Community is the best source for information around Oracle SOA a wonderful platform with many interesting contacts and discussions”. Torsten Winterberg, Opitz Consulting “The regular meetings of the SOA Partner Community are a perfectly organized platform for learning the latest in Oracle SOA tooling by extraordinary speakers and for vivid discussions with practitioners about SOA challenges and design solutions. This is the best opportunity to build and deepen a network with the brightest and most passionate protagonists in Oracle SOA world in EMEA.” Hajo Normann, HP Services Technorati Tags: soa partner community forum,soa,event

  Read the article

• How to use Object Type Converter

  - by arun.x.sridharan(at)oracle.com

  UseCase Description A person form where in user will enter String which has to be converted to Number while persisting. From the User Interface we might be getting a String value which has to be persisted in the database as a number in that scenario we can use converters to map the java object which is of type String to its database value which is a Number. For example , there is a 'Person' table in database which is used to store the user details passed from the User Interface. It has a 'Status' column which is of the value  Number. But from the User Interface String values (Active/InActive) are passed . For persisting the user details we can use Object type converter and provide the mappings for status column corresponding to the String values. Object type converter can be used if you wanted to have a mapping for a field for example when departmentName on the entity was of String value and mapped to dept_name field on the database table which is of the value NUMBER.   Implementation steps Sample EJB API for setting the value of status on Person Entity as a String     public void createPerson(String status,String firstName,String lastName) {                Person person = new Person();                // status will be set as a String value received from the User Interface         person.setStatus(status);                person.setFirstname(firstName);        person.setLastname(lastName);                persistPerson(person);         } In the sample code shown above status is passed as a String, this has to be converted to Number. The String value obtained will be set on Person object and persistPerson API will be called for creating a new person from the values passed from the User Interface.  Steps to configure Object type converter: 1. Navigate to Person Entity from persistence.xml and navigate to status field2. Click on Conversion tab and select Converted check box3. Select Object Type Converter radio button and set the Data Type Class to      java.math.BigDecimal and Object Type Class to java.lang.String4. Specify the conversion values for all the values that can be passed from the user interface  as shown below5. Set the Default Object value

  Read the article

• ArchBeat Link-o-Rama for 2012-07-11

  - by Bob Rhubart

  Is the future of retail showrooming? | GigaOm "The digital shopper isn’t just digital and she expects to be served seamlessly across all channels, physical and digital," reports GigaOm. Twenty years into the Internet era and the changes just keep coming. Solution architects take note... Agile Bureaucracy: When Practices become Principles | Jim Highsmith.com "Principles and values are a critical part of keeping individuals in organizations aligned and engaged," says Agile guru Jim Highsmith, "but the more pseudo-principles are piled on top of principles, the less and less organizations are able to adapt." Oracle Fusion Applications 11g Basics | Michel Schildmeijer "We are trying to build up a Oracle Fusion Apps environment on a Exalogic system, though still on bare metal, because officially there still is no Oracle VM available yet on Exalogic," says Michel Schildmeijer, an Oracle Fusion Middleware Architect at Qualogy. "It is a bit of a challenge, but getting to know the basics and which components the install, build and configure phase use, might bring you a step further on the way." Process Centric Banking: Loan Origination Solution | Manish Palaparthy This interesting, detailed post by Manish Palaparthy explains the process behind the execution of a proof-of-concept for a Fusion Middleware-based loan-origination solution for a bank. The solution incorporates Oracle BPM Suite, Webcenter, and ADF technolgies in a SOA infrastructure. How eBay and Facebook are Cleaning Up Data Centers | Amy Gallo - HBR The Cloud has needs! As reported by Amy Gallo in an article in the Harvard Business Review, "The electricity demand of data centers and the telecommunications network is rivaling that of most nations. If the cloud were itself a country, it would rank fifth in the world on energy demand behind the U.S., China, Russia, and Japan." Do WebLogic configuration from ANT | Edwin Biemond "With WebLogic WLST you can script the creation of all your Application DataSources or SOA Integration artifacts( like JMS etc)," says Oracle ACE Edwin Biemond. "This is necessary if your domain contains many WebLogic artifacts or you have more then one WebLogic environment. If so, you want to script this so you can configure a new WebLogic domain in minutes and you can repeat this task with always the same result." Oracle Special-Edition E-Book: Cloud Architecture for Dummies Learn how to architect and model your cloud implementation to drive efficiency and leverage economies of scale with Cloud Architecture for Dummies, a free Oracle e-book. (Registration required.) Thought for the Day "One of the best things to come out of the home computer revolution could be the general and widespread understanding of how severely limited logic really is." — Frank Herbert Source: SoftwareQuotes.com

  Read the article

• Webcast Q&A: Cisco's Platform Approach to Identity Management

  - by Tanu Sood

  Thanks to all who attended the live webcast we hosted on Cisco: Best Practices for a Platform Approach on Wed, March 14th. Those of you who couldn’t join us, the webcast replay is now available. Many thanks to our guest speaker, Ranjan Jain, Security Architect at Cisco for walking us through Cisco’s drivers and rationale for the platform approach, the implementation strategy, results, roadmap and recommendations. We greatly appreciate the insight he shared with us all on the deployment synergies with a platform approach to Identity Management. A forward looking organization, Cisco also has plans for secure cloud and mobile access enablement so it was interesting to learn how the Platform approach to Identity Management today is laying down the foundation for those future initiatives. While we tackled a good few questions during the webcast, we have captured the responses to those that we weren’t able to get to: Q.Can you provide insight into how you approached developing profiles for each user groupA. At Cisco, the user profile was already available to IT before the platform consolidation started. There is a dedicated business team that manages the user profiles. Q. What is the current version of Oracle Identity Manager in the market?A. Oracle Identity Manager 11gR1 is the latest version of our industry leading user provisioning/identity administration solution. Q. Is data resource segmentation part of the overall strategy at Cisco?A. It is but it is managed by the business teams and not at the IT level. Q. Does Cisco also have an Active Directoy LDAP? Do they sync AD from OID or do the provision to AD as another resource?[A. Yes, we do. AD is provisioned using in-house tools and not via Oracle Identity Manager (OIM). Q. If we already have a point IDM solution in place (SSO), can the platform approach still work?A. Yes, the platform approach calls for a seamless, standardized framework for identity management to support the enterprise’s entire infrastructure, both on-premise or in the cloud. Oracle Identity Management solutions are standards based so they can easily integrate and interoperate with existing Oracle or non-Oracle solutions. Hope you enjoyed the webcast and we look forward to having you join us for the next webcast in our Customers Talk: Identity as a Platform webcast series:ING: Scaling Role Management and Access Certification to Thousands of ApplicationsWednesday, April 11th at 10 am PST/ 1 pm ESTRegister Today We are also hosting a live event series in collaboration with the Aberdeen Group. To hear first-hand, the insights from the recently released Aberdeen Report and to discuss the merits of the Platform approach, do join us at this event. You can also connect with Oracle Identity Management SMEs and get your questions answered live. Aberdeen Group Live Event Series: IAM Integrated - Analyzing the "Platform" vs. "Point Solution" ApproachNorth America, April 10 - May 22Register for an event near you And here’s the slide deck from our Cisco webcast:   Oracle_Cisco identity platform approach_webcast View more presentations from OracleIDM

  Read the article

• Unit Testing with NUnit and Moles Redux

  - by João Angelo

  Almost two years ago, when Moles was still being packaged alongside Pex, I wrote a post on how to run NUnit tests supporting moled types. A lot has changed since then and Moles is now being distributed independently of Pex, but maintaining support for integration with NUnit and other testing frameworks. For NUnit the support is provided by an addin class library (Microsoft.Moles.NUnit.dll) that you need to reference in your test project so that you can decorate yours tests with the MoledAttribute. The addin DLL must also be placed in the addins folder inside the NUnit installation directory. There is however a downside, since Moles and NUnit follow a different release cycle and the addin DLL must be built against a specific NUnit version, you may find that the release included with the latest version of Moles does not work with your version of NUnit. Fortunately the code for building the NUnit addin is supplied in the archive (moles.samples.zip) that you can found in the Documentation folder inside the Moles installation directory. By rebuilding the addin against your specific version of NUnit you are able to support any version. Also to note that in Moles 0.94.51023.0 the addin code did not support the use of TestCaseAttribute in your moled tests. However, if you need this support, you need to make just a couple of changes. Change the ITestDecorator.Decorate method in the MolesAddin class: Test ITestDecorator.Decorate(Test test, MemberInfo member) { SafeDebug.AssumeNotNull(test, "test"); SafeDebug.AssumeNotNull(member, "member"); bool isTestFixture = true; isTestFixture &= test.IsSuite; isTestFixture &= test.FixtureType != null; bool hasMoledAttribute = true; hasMoledAttribute &= !SafeArray.IsNullOrEmpty( member.GetCustomAttributes(typeof(MoledAttribute), false)); if (!isTestFixture && hasMoledAttribute) { return new MoledTest(test); } return test; } Change the Tests property in the MoledTest class: public override System.Collections.IList Tests { get { if (this.test.Tests == null) { return null; } var moled = new List<Test>(this.test.Tests.Count); foreach (var test in this.test.Tests) { moled.Add(new MoledTest((Test)test)); } return moled; } } Disclaimer: I only tested this implementation against NUnit 2.5.10.11092 version. Finally you just need to run the NUnit console runner through the Moles runner. A quick example follows: moles.runner.exe [Tests.dll] /r:nunit-console.exe /x86 /args:[NUnitArgument1] /args:[NUnitArgument2]

  Read the article

• Process Rules!

  - by Ajay Khanna

  One of the key components of a process is “Business Rule”. Business rule takes many forms inside your process definition and in a way is a manifestation of your company’s business policy. Business rules inside the process are used for policy enforcement, governance, decision management, operations efficiency etc. Following are some basic types of rules that can be a part of your process. 1. Process conditions:  These are defined as the process gateways that determine a path process will take depending on the process parameters. For Example, if discount >10% go to approval path : if discount < 10% auto-approve order. 2. Data rules: These business rules are defined as facts in decision table or knowledge base. The process captures all required parameters and submits those to RETE based rules engine. Rules engine processes the data and returns the result back. For example, rules determining your insurance eligibility. 3. Event rules: Here the system is monitoring the various events and events patterns that are emerging inside the process or external to the process. You can define actions or alerts to be triggered when a certain pattern of events emerges over a specified time period. Such types of rules need Complex Event Processing and are used in applications like Credit Card Fraud detection or Utility Demand Response. 4. User Interface Rules: In order to add dynamic behavior to UI or to keep users from making mistakes and enforcing policy, another mechanism available is UI rules. They are evaluated as the end user is filling out the web forms. These may include enabling and disabling of UI as per business policy. An example could be, if the age of a user is less than 13 years, disable credit card field and enable parental approval required checkbox. Your process may include many of such rule types. Oracle OpenWorld provides a unique opportunity to listen to Oracle Business Process Management Experts and Customers.  We will discuss business rules during various sessions in Oracle OpenWorld. Two of the sessions specifically focused on business rules are listed below: Accelerating an Implementation of Complex Worldwide Business Approval Rules Wednesday, Oct 3, 10:15 AM Moscone South – 305 Oracle Business Rules Use Cases Design and Testing Wednesday, Oct 3, 3:30 PM Marriott Marquis - Golden Gate C3   Oracle Business Process Management Track covers a variety of topics, and speakers covering technology, methodology and best practices. You can see the list of Business process Management sessions here. Come back to this blog for more coverage from Oracle OpenWorld!

  Read the article

• ODI 11g - Cleaning control characters and User Functions

  - by David Allan

  In ODI user functions have a poor name really, they should be user expressions - a way of wrapping common expressions that you may wish to reuse many times - across many different technologies is an added bonus. To illustrate look at the problem of how to remove control characters from text. Users ask these types of questions over all technologies - Microsoft SQL Server, Oracle, DB2 and for many years - how do I clean a string, how do I tokenize a string and so on. After some searching around you will find a few ways of doing this, in Oracle there is a convenient way of using the TRANSLATE and REPLACE functions. So you can convert some text using the following SQL; replace( translate('This is my string'||chr(9)||' which has a control character', chr(3)||chr(4)||chr(5)||chr(9), chr(3) ), chr(3), '' ) If you had many columns to perform this kind of transformation on, in the Oracle database the natural solution you'd go to would be to code this as a PLSQL function since you don't want the code splattered everywhere. Someone tells you that there is another control character that needs added equals a maintenance headache. Coding it as a PLSQL function will incur a context switch between SQL and PLSQL which could prove costly. In ODI user functions let you capture this expression text and reference it many times across your mappings. This will protect the expression from being copy-pasted by developers and make maintenance much simpler - change the expression definition in one place. Firstly define a name and a syntax for the user function, I am calling it UF_STRIP_BAD_CHARACTERS and it has one parameter an input string;  We then can define an implementation for each technology we will use it, I will define Oracle's using the inputString parameter and the TRANSLATE and REPLACE functions with whatever control characters I want to replace; I can then use this inside mapping expressions in ODI, below I am cleaning the ENAME column - a fabricated example but you get the gist.  Note when I use the user function the function name remains in the text of the mapping, the actual expression is not substituted until I generate the scenario. If you generate the scenario and export the scenario you can have a peak at the code that is processed in the runtime - below you can see a snippet of my export scenario;  That's all for now, hopefully a useful snippet of info.

  Read the article

• How can I solve this SAT edge case?

  - by ssb

  I have an SAT implementation that basically works, and the fact that it works is what's giving me a few headaches. Basically there are some situations where using the SAT doesn't quite give me my intended result. One of these involves movement across multiple collision objects. Or to put it another way, if I have several collision boxes lined up next to each other such as to create something like a wall or a floor, movement along that surface while constantly applying force into that surface sometimes causes hangups, i.e. the player stops moving. This illustration shows what I mean: The 2 boxes on the bottom represent a floor, and the box on top/in the middle represents what my player is doing. There are several squares lined up as world obstacles to create some kind of wall, and if I move to the left across this surface while holding the down key then the issue arises. It only happens at the exact dividing point between two blocks. It only happens when moving to the left. At any rate I think I know why it happens, but I don't know how to solve it. Basically when I update my player movement I consider which directions are pressed, naturally, so if down is pressed I will add the speed to the Y component, and so on. But due to the way my SAT is implemented, when the penetration into the shape is the same from both sides it just goes with the smallest axis that it finds first, and it checks collisions against objects in the order that they were created because it goes through a foreach loop on the list of collidable objects. So this all adds up to the effect of if I'm moving to the left over a series of boxes while holding down, it will resolve me back to the right out of the first box and then up out of the box to the right of it, and this continues as long as the penetration is the same. The odd part is that this doesn't happen every time, which I am going to attribute to some oddity regarding multiplying velocity by the game time and causing some minor discrepancies between the lengths. Ultimately what this boils down to is that it will keep resolving me to the right and up, but this is technically expected behavior. All the solutions I can think of only address the symptoms of this problem and not the actual cause, such as not using many blocks to create walls or shapes, which is an option I'd like to keep open. I could also change which axis my algorithm defaults to, but that would just cause problems when going up/down along the walls. What can I do to fix this?

  Read the article

• Is it a bug or a task when something doesn't work, yet, in development process

  - by Patkos Csaba

  We usually have this dilemma in our team. Sometimes, in order to implement a task or a story we find out that the system must be in a specific state. For example, a specific system configuration has to be made beforehand. The task / story can be completed and it is working as specified on it with the proper configuration in place. Note that the configuration is not directly related with the task. Next, we have to create a new ... ??? ... something for the process of generating that configuration file. This is where the problems appear. Some say that it is a bug others say it is a task or an extra feature. So, where is the limit between bugs and tasks in the development phase? Should we even consider something a bug if all the tasks are working as stated in their definitions? Can a thing be considered a bug because one compares it to the current (unstable) state of the system? Short example: A feature requires configuring a communication service for a specific operation. In the process of the implementation the team discovers that the service requires the hostnames of the pears to be resolvable to an IP address. The team adds the hostnames to the DNS server (or hosts files) and continues implementing the required feature. After the initial feature is working, a question is risen. Should the sysadmin configure the DNS or hosts file or should our application do it automatically? An automatic solution is possible. So a decision is made to implement it. ... here start the discussions ... is this a bug or an extra feature / task? PS: I know that I mixed feature / task / story in the question. It is intentional. I am interested in separating bugs from the rest. Doesn't matter what the rest means in a particular case.

  Read the article

• TomEE Integration in NetBeans Next

  - by Geertjan

  At JavaOne 2013, there was a lot of buzz around the TomEE server, e.g., many Tweets, nice party, and a new TomEE consulting company. For those tracking TomEE developments, it is interesting to note that recently the NetBeans IDE development builds have had added to them... TomEE support. Note: The TomEE support described here is not in NetBeans IDE 7.4, but in development builds for the next release of NetBeans IDE.For example, with NetBeans IDE development builds you're able to: register TomEE as a server in the Services window (TomEE has several distributions, e.g., one can use the "with JAX-RS" one, for example) create a Java EE 6 web project (e.g., Maven based) against this server create JPA entities from database create JAX-RS classes from JPA entities create JSF pages from JPA entities the IDE lets you create a new data source for TomEE and deploy it to the server the IDE figures out the components that are already packaged in TomEE, and the fact that (unlike with regular Tomcat), it does not need to package any components such as JSF implementation, persistence provider, or JAX-RS runtime, so that the resulting WAR file is very small the IDE can also do "deploy on save" with TomEE, so that your development cycle is very fast Adam Bien blogged about how he set up TomEE sometime ago, here. The official support in NetBeans IDE will be much more tightly integrated, simplifying the steps Adam describes. For example, the IDE does step 2 from Adam's blog for you, i.e., it sets up TomEE deployment roles. Moreover, it knows about all the technologies included in TomEE so that it can optimize the packaging; it knows about TomEE's persistence setup; it can work with TomEE data sources, etc. Below you see a Maven-based Java EE 6 PrimeFaces application (all entities and JSF pages generated from a database) deployed to TomEE in NetBeans IDE: And here's the management console for configuring and finetuning TomEE in NetBeans IDE: When I tried out the NetBeans IDE development build and TomEE, to see how everything fits together, I was surprised at how fast TomEE started up. Not sure what they did to it, but seems like a server on steroids. And setting it up in NetBeans IDE was trivial. Add the simple set up of TomEE in NetBeans IDE to the many benefits that the widely praised out of the box NetBeans Maven tools make possible, together with the fact that not one single plugin had to be installed to get everything you see described here up and running... and you have a really powerful combination of dev tools, all for free.

  Read the article

• Content Based Routing with BRE and ESB

  - by Christopher House

  I've been working with BizTalk 2009 and the ESB toolkit for the past couple of days.  This is actually my first exposure to ESB and so far I'm pleased with how easy it is to work with. Initially we had planned to use UDDI for storing endpoint information.  However after discussing this with my client, we opted to look at BRE instead of UDDI since we're already storing transforms in BRE.  Fortunately making the change to BRE from UDDI was quite simple.  This solution of course has the added advantage of not needing to go through the convoluted process of registering our endpoints in UDDI. The first thing to remember if you want to do content based routing with BRE and ESB is that the pipleines included in the ESB toolkit don't include disassembler components.  This means that you'll need to first create a custom recieve pipeline with the necessary disassembler for your message type as well as the ESB components, itinerary selector and dispather. Next you need to create a BRE policy.  The ESB.ContextInfo vocabulary contains vocabulary links for the various items in the ESB context dictionary.  In this vocabulary, you'll find an item called Context Message Type, use this as the left hand side of your condition.  Set the right hand side to your message type, something like http://your.message.namespace/#yourrootelement.  Now find the ESB.EndPointInfo vocabulary.  This contains links to all the properties related to endpoint information.  Use the various set operators in your rule's action to configure your endpoint. In the example above, I'm using the WCF-SQL adapter. Now that the hard work is out of the way, you just need to configure the resolver in your itinerary. Nothing complicated here.  Just select BRE as your resolver implementation and select your policy from the drop-down list.  Note that when you select a policy, the Version field will be automatically filled in with the version of your policy.  If you leave this as-is, the resolver will always use that policy version.  Alternatively, you can clear the version number and the resolver will use the highest deployed version.

  Read the article

• BPM 11g Customer Stories & Solution Catalog & Process Accelerators

  - by JuergenKress

  Stories Everyone loves a good story on planning or implementing a BPM strategy. Everyone wants to hear how it was done before?, what worked?, what was achieved? If you have achieved success with BPM, we are very keen to hear your stories and examples of how your customers use it. We receive lots of requests from people who are thinking of using BPM to solve a specific problem or in combination with a specific technology to talk to someone who has done it before. These stories are invaluable. Drop down the details of anything you think is relevant with a bit of detail and we will follow up on it. As one good deed deserves another, we will do our best to give you stories if you need them to show that where you are going, others have treaded before. Send your stories to us using this e-mail link and we will share them among other like minded people. Solution Catalogue This summer, Oracle is launching a solution catalogue specifically intended for partners. If you have delivered a successful implementation in BPM and think it could be reused and applied again in a similar scenario in the same industry or in a similar environment, then we ware keen to know about it and will add it to the solution catalogue. The solution catalogue will showcase successful BPM solutions both inside and outside Oracle. Be in touch with us on this e-mail link and we will make sure to add your solution. Process Accelerators Finally if you have specific processes that you are expert on, you have implemented at a customer and you want to work with us on getting these productised, then we would love to know about it. The process accelerator programme is explained in the most recent SOA/BPM Community Newsletter but again feel free to contact us if you want to get involved. Good luck with BPM and let us know how we can help. Barry O'Reilly Director BPM Solutions [email protected] SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: BPM,Barry O Reilly,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

  Read the article

• 0xC0017011 and other error messages - what is the error message text?

  Recently there was a bug raised against BIDS Helper which originated in my Expression Editor control. Thankfully the person that raised it kindly included a screenshot, so I had the error code (HRESULT 0xC0017011) and a stack trace that pointed the finger firmly at my control, but no error message text. The code itself looked fine so I searched on the error code but got no results. I’d expected to get a hit from Books Online with the Integration Services Error and Message Reference topic at the very least, but no joy. There is however a more accurate and definitive reference, namely the header file that defines all these codes dtsmsg.h which you can find at- C:\Program Files (x86)\Microsoft SQL Server\110\SDK\Include\dtsmsg.h Looking the code up in the header file gave me a much more useful error message. //////////////////////////////////////////////////////////////////////////// // The parameter is sensitive // // MessageId: DTS_E_SENSITIVEPARAMVALUENOTALLOWED // // MessageText: // // Accessing value of the parameter variable for the sensitive parameter "%1!s!" is not allowed. Verify that the variable is used properly and that it protects the sensitive information. // #define DTS_E_SENSITIVEPARAMVALUENOTALLOWED ((HRESULT)0xC0017011L) Unfortunately I’d forgotten all about this. By the time I had remembered about it, the person who raised the issue had managed to narrow it down to something to do with having  sensitive parameter. Putting that together with the error message I’d finally found, a quick poke around in the code and I found the new GetSensitiveValue method which seemed to do the trick. The HResult fields are also listed online but it only shows the short error message, and it doesn’t include that all so important HRESULT value itself. So let this be a lesson to you (and me!), if you need to check  SSIS error go straight to the horses mouth - dtsmsg.h. This is particularly true when working with early builds, or CTP releases when we expect the documentation to be a bit behind. There is also a programmatic approach to getting better SSIS error messages. I should to take another look at the error handling in the control, or the way it is hosted in BIDS Helper. I suspect that if I use an implementation of Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSInfoEvents100 I could catch the error itself and get the full error message text which I could then report back. This would obviously be a better user experience and also make it easier to diagnose any issues like this in the future. See ExprssionEvaluator.cs for an example of this in use in the Expression Editor control.

  Read the article

• State / Screen management in Entity Component Systems

  - by David Lively

  My entity/component system is happily humming along and, despite some performance concerns I initially had, everything is working fine. However, I've realized that I missed a crucial point when starting this thing: how do you handle different screens? At the moment, I have a GameManager class which owns a component manager and entity manager. When I create an entity, the entity manager assigns it an ID and makes sure it's tracked. When I modify the components that are assigned to an entity. an UpdateEntity method is called, which alerts each of the systems that they may need to add or remove the entity from their respective entity lists. A problem with this is that the collection of entities operated on by each system is determined solely by the individual Systems, typically based on a "required component" filter. (An entity has to have a Renderable component to be rendered, for instance.) In this situation, I can't just keep collections of entities per screen and only Update/Draw those collections. They'd have to either be added and removed depending on their applicability to the current screen, which would cause their associated components to be removed, or enable/disable entities in a group per screen to hide what's not supposed to be visible. These approaches seem like really, really crappy kludges. What's a good way to handle this? A pretty straightforward way that comes to mind is to create a separate GameManager (which in my implementation owns all of the systems, entities, etc.) per screen, which means that everything outside of the device context would be duplicated. That's bothersome because some things are always visible, or I might want to continue to display the game under a translucent menu window. Another option would be to add a "layer" key to the GameManager class, which could be checked against a displayable layer stack held by the game manager. *System.Draw() would be called for each active layer, in the required order as determined by the stack. When the systems request an iterator for their respective entity collections, it would be pre-filtered to a (cached) set of those entities that participate in the active layer. Those collections could be updated from the same UpdateEntity event that's already used to maintain each system's entity collections. Still, kinda feels like a hack. If I've coded myself into a corner, feel free to throw tomatoes as long as they're labeled with a helpful suggestion. Hooray for learning curves.

  Read the article

• PCF shadow shader math causing artifacts

  - by user2971069

  For a while now I used PCSS for my shadow technique of choice until I discovered a type of percentage closer filtering. This method creates really smooth shadows and with hopes of improving performance, with only a fraction of texture samples, I tried to implement PCF into my shader. This is the relevant code: float c0, c1, c2, c3; float f = blurFactor; float2 coord = ProjectedTexCoords; if (receiverDistance - tex2D(lightSampler, coord + float2(0, 0)).x > 0.0007) c0 = 1; if (receiverDistance - tex2D(lightSampler, coord + float2(f, 0)).x > 0.0007) c1 = 1; if (receiverDistance - tex2D(lightSampler, coord + float2(0, f)).x > 0.0007) c2 = 1; if (receiverDistance - tex2D(lightSampler, coord + float2(f, f)).x > 0.0007) c3 = 1; coord = (coord % f) / f; return 1 - (c0 * (1 - coord.x) * (1 - coord.y) + c1 * coord.x * (1 - coord.y) + c2 * (1 - coord.x) * coord.y + c3 * coord.x * coord.y); This is a very basic implementation. blurFactor is initialized with 1 / LightTextureSize. So the if statements fetch the occlusion values for the four adjacent texels. I now want to weight each value based on the actual position of the texture coordinate. If it's near the bottom-right pixel, that occlusion value should be preferred. The weighting itself is done with a simple bilinear interpolation function, however this function takes a 2d vector in the range [0..1] so I have to convert my texture coordinate to get the distance from my first pixel to the second one in range [0..1]. For that I used the mod operator to get it into [0..f] range and then divided by f. This code makes sense to me, and for specific blurFactors it works, producing really smooth one pixel wide shadows, but not for all blurFactors. Initially blurFactor is (1 / LightTextureSize) to sample the 4 adjacent texels. I now want to increase the blurFactor by factor x to get a smooth interpolation across maybe 4 or so pixels. But that is when weird artifacts show up. Here is an image: Using a 1x on blurFactor produces a good result, 0.5 is as expected not so smooth. 2x however doesn't work at all. I found that only a factor of 1/2^n produces an good result, every other factor produces artifacts. I'm pretty sure the error lies here: coord = (coord % f) / f; Maybe the modulo is not calculated correctly? I have no idea how to fix that. Is it even possible for pixel that are further than 1 pixel away?

  Read the article

• Android Touch Event Collision Detection

  - by chrissb

  I'm relatively new to both Java and Android, so hopefully the problem I'm having is stemming from something pretty minor that I've overlooked. I've got a (very early stage) game that I've started working on, for Android using Java. At this stage, when the user touches the screen, if they touched a point at which there is an enemy, the enemies health is decreased and they become immobile (for the current implementation at least). The issue that I'm having is that the touch detection doesn't always seem to work. I've got a testing sprite set up that goes to the eventX and eventY coordinates of the touch down event, and it always seems to collide with the enemy object. Yet, the enemy doesn't always register as being hit, and sometimes a hit is registered when the sprite indicates the touch coordinates were outside of the enemies bounding box. I realise that this probably doesn't mean much without any code, so here's what I've got so far. Be gentle, as this is literally my first attempt at something more than basic movement etc. First off, the MainGamePanel class registers the touch event, and informs the levelmanager class (which is what I set up to monitor/handle enemies) public boolean onTouchEvent(MotionEvent event) { if (event.getAction() == MotionEvent.ACTION_DOWN){ levelManager.handleActionDown((int)event.getX(), (int)event.getY()); targetX=event.getX(); targetY=event.getY(); } if (event.getAction() == MotionEvent.ACTION_MOVE) { //the gestures } if (event.getAction() == MotionEvent.ACTION_UP) { //touch was released } return true; } From there, in the levelmanager class the touch event is passed on to all of the enemies within a list array: public static void handleActionDown(int eventX,int eventY){ hit=false; for (enemy1 en : enemy1array){ en.handleActionDown(eventX, eventY); } } The rest of the collision code is handled within the enemies handleActionDown function: public void handleActionDown(int eventX, int eventY) { if(eventX>this.x-enemy1bitmap.getWidth() && eventX<this.x+enemy1bitmap.getWidth() && eventY>this.y-enemy1bitmap.getHeight() && eventY<this.x+enemy1bitmap.getHeight()){ takeDamage(1); levelmanager.setHit(); } } I should probably be using getWidth()/2 and getHeight()/2 for it to be more accurate, but I expanded the area to test this - although I've noticed no improvement. At this stage, the games detection over whether or not the enemy is hit is spotty at best. Generally it takes two or three attempts before a collision is successfully registered, even though the sprite that is being used for testing and set to the eventX and eventY coordinates always indicates that the collision should have worked. Hopefully someone can steer me in the right direction here, and if more information is needed, ask away! Cheers, -Chris

  Read the article

• consume a .net webservice using jQuery

  - by Babunareshnarra

  Implementation shows the way to consume web service using jQuery. The client side AJAX with HTTP POST request is significant when it comes to loading speed and responsiveness.Following is the service created that return's string in JSON.[WebMethod][ScriptMethod(ResponseFormat = ResponseFormat.Json)]public string getData(string marks){    DataTable dt = retrieveDataTable("table", @"              SELECT * FROM TABLE WHERE MARKS='"+ marks.ToString() +"' ");    List<object> RowList = new List<object>();    foreach (DataRow dr in dt.Rows)    {        Dictionary<object, object> ColList = new Dictionary<object, object>();        foreach (DataColumn dc in dt.Columns)        {            ColList.Add(dc.ColumnName,            (string.Empty == dr[dc].ToString()) ? null : dr[dc]);        }        RowList.Add(ColList);    }    JavaScriptSerializer js = new JavaScriptSerializer();    string JSON = js.Serialize(RowList);    return JSON;}Consuming the webservice $.ajax({    type: "POST",    data: '{ "marks": "' + val + '"}', // This is required if we are using parameters    contentType: "application/json",    dataType: "json",    url: "/dataservice.asmx/getData",    success: function(response) {               RES = JSON.parse(response.d);        var obj = JSON.stringify(RES);     }     error: function (msg) {                    alert('failure');     }});Remember to reference jQuery library on the page.

  Read the article

• Domain Models (PHP)

  - by Calum Bulmer

  I have been programming in PHP for several years and have, in the past, adopted methods of my own to handle data within my applications. I have built my own MVC, in the past, and have a reasonable understanding of OOP within php but I know my implementation needs some serious work. In the past I have used an is-a relationship between a model and a database table. I now know after doing some research that this is not really the best way forward. As far as I understand it I should create models that don't really care about the underlying database (or whatever storage mechanism is to be used) but only care about their actions and their data. From this I have established that I can create models of lets say for example a Person an this person object could have some Children (human children) that are also Person objects held in an array (with addPerson and removePerson methods, accepting a Person object). I could then create a PersonMapper that I could use to get a Person with a specific 'id', or to save a Person. This could then lookup the relationship data in a lookup table and create the associated child objects for the Person that has been requested (if there are any) and likewise save the data in the lookup table on the save command. This is now pushing the limits to my knowledge..... What if I wanted to model a building with different levels and different rooms within those levels? What if I wanted to place some items in those rooms? Would I create a class for building, level, room and item with the following structure. building can have 1 or many level objects held in an array level can have 1 or many room objects held in an array room can have 1 or many item objects held in an array and mappers for each class with higher level mappers using the child mappers to populate the arrays (either on request of the top level object or lazy load on request) This seems to tightly couple the different objects albeit in one direction (ie. a floor does not need to be in a building but a building can have levels) Is this the correct way to go about things? Within the view I am wanting to show a building with an option to select a level and then show the level with an option to select a room etc.. but I may also want to show a tree like structure of items in the building and what level and room they are in. I hope this makes sense. I am just struggling with the concept of nesting objects within each other when the general concept of oop seems to be to separate things. If someone can help it would be really useful. Many thanks

  Read the article

• ArchBeat Link-o-Rama for 2012-04-05

  - by Bob Rhubart

  Webcast: Oracle Maximum Availability Architecture Best Practices event.on24.com Date: Thursday, April 12, 2012 Time: 10:00 AM PDT Oracle expert Tom Kyte discusses how Oracle’s Maximum Availability Architecture can help to minimize the costs and risk of downtime. Oracle Enterprise Manager Ops Center 12c Launch - Interactive Webcast and Live Chat www.oracle.com Thursday, April 12, 2012. 9 a.m. PT / 12 p.m. ET / 4 p.m. GMT. Speakers: Steve Wilson (VP Systems Management, Oracle) John Fowler (Exec VP Systems, Oracle) Brad Cameron (VP Development, Oracle Fusion Middleware) Bill Nesheim (VP Oracle Solaris) Dennis Reno (VP Customer Portal Experience, Oracle) Mike Wookey (Chief Architect, Oracle Enterprise Manager Ops Center) Prasad Pai (Sr Director, Oracle Enterprise Manager Ops Center) 2012 Real World Performance Tour Dates |Performance Tuning | Performance Engineering www.ioug.org Coming to your town: a full day of real world database performance with Tom Kyte, Andrew Holdsworth, and Graham Wood. Rochester, NY - March 8 Los Angeles, CA - April 30 Orange County, CA - May 1 Redwood Shores, CA - May 3 Oracle Technology Network Developer Day: MySQL - New York www.oracle.com Wednesday, May 02, 2012 8:00 AM – 4:30 PM Grand Hyatt New York 109 East 42nd Street, Grand Central Terminal New York, NY 10017 Webcast Series: Data Warehousing Best Practices event.on24.com April 19, 2012 - Best Practices for Workload Management of a Data Warehouse on Oracle Exadata May 10, 2012 - Best Practices for Extreme Data Warehouse Performance on Oracle Exadata How to create a Global Rule that stores a document’s folder path in a custom metadata field | Nicolas Montoya blogs.oracle.com An illustrated how-to from Oracle Fusion Middleware A-Team blogger Nicolas Montoya. Get Proactive with Fusion Middleware | Daniel Mortimer blogs.oracle.com Daniel Mortimer shows how to access "a one stop shop for navigating to proactive support material, tools, and communication channels related to Oracle Fusion Middleware." Build an enterprise on 'other peoples' work', via SOA and cloud | Joe McKendrick www.zdnet.com Are you down with OPW? Joe McKendrick's synopsis of a recent presentation by David Linthicum focuses on reuse. Oracle Fusion Middleware Security: Unsolicited login with OAM 11g | Chris Johnson fusionsecurity.blogspot.com Chris Johnson shows how to create a shopping cart login model using "plain old HTML." How to use the Human WorkFlow Web Services | Edwin Biemond biemond.blogspot.com Oracle ACE Edwin Biemond shows how to invoke two WorkFlow web services to query the Human task in Oracle SOA Suite with your own ordering and restrictions. Bad Practice Use Case for LOV Performance Implementation in ADF BC | Andrejus Baranovskis andrejusb.blogspot.com "If you want to learn something well, there is nothing better [than] to learn bad practices first," says Oracle ACE Director Andrejus Baranovskis. Thought for the Day "The best meetings get real work done. When your people learn that your meetings actually accomplish something, they will stop making excuses to be elsewhere." — Larry Constantine

  Read the article

• Antenna Aligner Part 5: Devil is in the detail

  - by Chris George

  "The first 90% of a project takes 90% of the time and the last 10% takes the another 200%"  (excerpt from onista) Now that I have a working app (more or less), it's time to make it pretty and slick. I can't stress enough how useful it is to get other people using your software, and my simple app is no exception. I handed my iPhone to a couple of my colleagues at Red Gate and asked them to use it and give me feedback. Immediately it became apparent that the delay between the list page being shown and the list being drawn was too long, and everyone who tried the app clicked on the "Recalculate" button before it had finished. Similarly, selecting a transmitter heralded a delay before the compass page appeared with similar consequences. All users expected there to be some sort of feedback/spinny etc. to show them it is actually doing something. In a similar vein although for opposite reasons, clicking the Recalculate button did indeed recalculate the available transmitters and redraw them, but it did this too fast! One or two users commented that they didn't know if it had done anything. All of these issues resulted in similar solutions; implement a waiting spinny. Thankfully, jquery mobile has one built in, primarily used for ajax operations. Not wishing to bore you with the many many iterations I went through trying to get this to work, I'll just give you my solution! (Seriously, I was working on this most evenings for at least a week!) The final solution for the recalculate problem came in the form of the code below. $(document).on("click", ".show-page-loading-msg", function () {            var $this = $(this),                theme = $this.jqmData("theme") ||                        $.mobile.loadingMessageTheme;            $.mobile.showPageLoadingMsg(theme, "recalculating", false);            setTimeout(function ()                           { $.mobile.hidePageLoadingMsg(); }, 2000);            getLocationData();        })        .on("click", ".hide-page-loading-msg", function () {              $.mobile.hidePageLoadingMsg();        }); The spinny is activated by setting the class of a button (for example) to the 'show-page-loading-msg' class. Recalculate This means the code above is fired, calling the showPageLoadingMsg on the document.mobile object. Then, after a 2 second timeout, it calls the hidePageLoadingMsg() function. Supposedly, it should show "recalculating" underneath the spinny, but I've not got that to work. I'm wondering if there is a problem with the jquery mobile implementation. Anyway, it doesn't really matter, it's the principle I'm after, and I now have spinnys!

  Read the article

< Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >