Search Results

Search found 9935 results on 398 pages for 'about pages'.

Page 227/398 | < Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234  | Next Page >

• Speakers will not work after I use USB Headset

  - by Josh K

  I am trying to configure my SteelSeries Siberia V2 Frost USB Headset to work with my 2.0 speakers using a jack. My goal is to find a easy way (no restart) to switch playback from my headset and my speakers and vice-versa. If i plug my headset in and make it the default device then restart my application/web page then the sounds works out of headset. If I switch the default to my speakers and restart apps/web pages then sound does not play. I know my speakers are on because if I configure them through windows and test, the sounds play, and sounds also play when I test it through my audio manager. Even if I unplug my headset, I still cannot get sound out of my speakers unless I restart My audio manager is RealTek HD Audio Manager, Windows 7 x64. I have tried the speaker back, usb front. speaker front, usb in front port. I have not tried speaker back, usb back.

  Read the article

• does the *physical* order/location of drives in a mdadm-managed RAID-10 array matter?

  - by locuse

  i've setup a 4-drive RAID-10 array using mdadm-managed, software-raid on an x86_64 box. it'd up & running and works as expected, cat /proc/mdstat md127 : active raid10 sdc2[2] sdd2[3] sda2[0] sdb2[1] 1951397888 blocks super 1.2 512K chunks 2 far-copies [4/4] [UUUU] bitmap: 9/466 pages [36KB], 2048KB chunk atm the four SATA drives are physically plugged into the motherboard's 1st four SATA ports. i'd like to gather the necessary/complete info for catastrophic recovery. reading starting here, http://neil.brown.name/blog, and the mailing list, i'm not yet completely confident i have it right. i understand 'drive order matters'. is that logical, &/or physical order that matters? if i unplugged the four drives in this array, and plugged them each back into different ports on the motherboard or a pci card, as long as i've changed nothing in software config, will the array correctly auto-re-assemble?

  Read the article

• Snow Leopard crashes my Xerox printer

  - by Ho Li Cow

  Just set up 2 brand new iMac 21.5" with OS X 10.6.2 pre-installed in our office. Now whenever we try to print an e-mail out, it re-sets the printer i.e. it switches off, does a POST and prints out a Printer Config page. I can print web pages and from other apps fine, just Apple Mail seems to be suffering. Printer is a Xerox Phaser 7750. I downloaded the drivers it recommended when i first tried printing which didn't help and then also tried downloading from the Xerox site. The latter seemed to install fine but then right at the end, it would say 'Installation Successful', then ask me to choose a printer (it found it fine, both by Bonjour and Raw TCP - i tried both) and then it would give an error message. Any help appreciated.

  Read the article

• 504 Gateway Time-out after php fatal error

  - by tiagojsag

  I'm using nginx and php-fpm to develop a symfony2 based website, under ubuntu 12.10 (yes, I know I'm using a beta OS). Everything was working out fine until, due to an error on my code, I called an unexisting function, and got the following: Fatal error: Call to a member function (....) This isn't a problem (it's a bug in my code, easily fixable), but after this, no other page loads. My browser just keeps trying to load the page from the webserver, until nginx timeouts (after +- 30s, which should be some default timeout) and returns: 504 Gateway Time-out Restarting php-fpm solves the issue. Nginx logs show a timeout message, and nothing appears on php-fpm logs, even if I set them to debug level. I tried switching from fpm to fastcgi, and the same thing happens. I've looked around, but all similar error are related to big requests/file handling, which isn't the case. All the pages on my website load in a few seconds, even under development conditions (no caching, etc).

  Read the article

• how do I setup Apache's Content-Encoding Header?

  - by Nick

  When attempting to validate my site with the W3C validator, it returns the error, "Don't know how to decode Content-Encoding 'none'". Firebug confirms that my server is sending the header, "Content-Encoding: none". But I can't find any directive in apache2.conf or in my vhost that sets the Content-Encoding header. Where does the directive go, and what should it be set to? UPDATE: On further examination it seems something is wrong with mod_deflate (gzip). It's zipping my css files just fine, but is not zipping the html generated by my php scripts. I have: AddOutputFilterByType DEFLATE text/html text/plain text/xml text/css And the pages are showing a mime type of: "text/html". But content encoding is "none" and they aren't zipping. Perhaps these issues are related?

  Read the article

• Does Chrome include ANGLE for WebGL?

  - by feklee

  I would like to try out WebGL on a laptop with an ATI Mobility Radeon 9000, WinXP/32, DirectX 9.0c. Some time ago I have gotten it to work with Firefox and software rendering. However, I heard about ANGLE and that some versions of Chrome support it. So I installed Chrome 11, canary build. Does that support ANGLE? Do I somehow need to activate it? Because, all WebGL pages that I tried with canary build say something like: "Failed to initialize WebGL"

  Read the article

• Page won't load on IE9 unless developer tools are started first

  - by RoyHB

  One of my pages (with very extensive javascript) won't load on IE9. It loads ok in Mozilla, Chrome, Safari and Opera. If IE9 Developer tools are running it loads fine. If I load IE9, load the developer tools (F12) then kill the developer tools it still loads fine. If developer tools are running then sometimes (but not always) the first message in the console is: HTML1113: Document mode restart from Quirks to IE9 Standards Doctype is: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> If I change doctype to and remove the xmlns nothing changes. I'm stumped. Any suggestions appreciated.

  Read the article

• How to print 4 index cards on a single A4 sheet in Word 2003

  - by Anna

  I have an index card designed in Word. It's fairly complicated with graphics, borders and background. The page layout has been set to landscape and with size set to 4x6. How can I print this, 4x per A4 landscape sheet? I cannot for the life of me work it out. The printer always seems to do a single card per A4 sheet, wasting 3/4 of the page. "Pages 1,1,1,1" will result in 4 sheets being printed. What am I doing wrong?

  Read the article

• Two different page numbers in Word 2007 (one starting at 1, the other at VI)

  - by user1251007

  I have a document (docA) with arabic page numbers in the header. Now docA is part of a thesis which has roman numbers in the footer. So I want to add roman page numbers to docA. This is no problem. But now I want to adjust the numbering of the roman numbers (as the thesis has lets say five pages). This is what I want: arabic page numbers in the header, starting at 1 roman page numbers in the footer, starting at VI I tried this: I choosed 'Page Number', 'Page Number Format' and tried to adjust the starting point. However, this changes both page numbers. How is it possible to have different numbering in the header and in the footer?

  Read the article

• University Assignment: Datacenter/Networking Infrastructure for Hosting Company [closed]

  - by TCB13

  My university assigned me to theorizing a data center for an Web Hosting company. The company should provide the following services: Shared WebHosting; Dedicated Servers; VPS (Virtual Private Server); The bandwith (as resquested) is limited to 10 Gbps. Is there any good book / other info I can read (max 100 pages) about how to design a good data center for hosting, what are the best practices and what should be done from a (logical) network perspective, what security policies should be implemented and how the data center should be built (physically)? Thank you ;)

  Read the article

• Broken web interface in WRT54G router

  - by asmo

  I flashed my WRT54G (v3) from a custom firmware to the lastest Linksys one (v4.21.1) Now the internet/LAN works fine, but the web interface (http://192.168.1.1/) shows broken pages. I tried to manually navigating to the firmware upgrade page (by entering its URL), but it is broken too and not working. I tried a 30/30/30 reset twice, but the broken web interface still shows up. I tried to flash using the tftp2.exe application, which told me that the router didn't respond to the request. I tried to flash using the Windows commandline TFTP protocol, but I don't know how to supply a password on this prococol. (there is a factory default password ("admin") which I can't remove since the web interface is broken)

  Read the article

• I want a hyperlink to open a browser tab, then all subsequent link clicks go to the same tab

  - by rossmcm

  I suspect I'm out of luck on this one, but here goes... Say I have a CHM help file that has http:// hyperlinks embedded in the help pages. When the user clicks on a hyperlink of the style: <a href="http://www.example.com" target="_blank">click here!</a> a browser window is opened and the target web page is displayed. If a browser is already open a new tab is created and the target displayed in that. If the user clicks on another link (or the same link) another browser window/tab opens, and so on. Is there any way I can force all clicks of the links to go to the same tab/browser window?

  Read the article

• Website visitors are still being redirected after "fixing" the damage from a conditional redirect website attack

  - by Shannon

  BACKGROUND A website of mine was recently the target of a conditional redirect attack. PHP code was added to my pages to redirect visitors. The .htaccess file was edited to redirect visitors. I've re-uploaded my website so the compromised PHP and .htaccess code have both been removed. My site is mostly handwritten php and static HTML content. I don't use page comments or any third party libraries. THE PROBLEM After removing the compromised php and htaccess files, visitors are still being re-directed. What could be the reason that visitors are still being redirected? Are there any tools to check where/how redirects are taking place so I can debug the problem? UPDATE - PROBLEM FIXED As suggested in the comments, I cleared my Firefox cache and that fixed the problem (for me anyway). Visitors with old cache data will obviously still be re-directed.

  Read the article

• Why do some PDFs lag in Adobe Acrobat?

  - by Coldblackice

  I have a handful of PDFs open. One of them in particular is extremely laggy, almost to the point of being unreadable. When I scroll through its pages, it's almost like an extreme version of v-sync being turned off. Very choppy. Overall system resources are plentiful, and all of the other PDFs cruise up and down with no stuttering or problems. I've tried closing and reopening the problem PDF to no avail. It's a small PDF, only 3MB in size, with no graphics (only programming code snippets). Surely, it must be some type of problem with the specific PDF (I'll try opening it in another PDF-viewing program, rather than Acrobat X). Possible corruption? Could there be some type of GPU/hardware-acceleration intervening going on? I've never heard of such with PDF-viewing.

  Read the article

• Third-party Information Screen Opening Blank

  - by Jacob

  I'm working with a client who is trying to use our software, which accesses information (sends & receives) from a third-party website. When this client tries to access these pages, a window opens, as expected, but is completely blank and no error message is received. This is the first time I've seen this with many other clients successfully using this product, which leads me to believe that it has something to do with the settings on the computer somewhere, but cannot figure out what might be happening. Windows Server 2003 R2, Standard Edition, Service Pack 2. Firewall is already off. Tried AVG on & temporarily disabled.

  Read the article

• remote desktop connection help?

  - by robin agrahari

  sir, i have created a web application in eclipse,db2 database server is running on my pc.so i can access the web application through the address http://localhost:8080/LimsWeb i used team viewer software to establish a remote desktop connection. can my friend somehow connect to my pc so that when he types the above url in his browser he will be able to fetch the pages of the application. i was able to do this by connecting with remote desktop mode.but in that case my friend was able to use the application which i created running on my pc only and in the window provided by team viewer.i want that he can run the application on his own computer calling the given url from his own browser. please help

  Read the article

• How to convert Kindle books into PDF format?

  - by verve

  I'm new to digital books and I use the Kindle app for Windows to read the books I bought but I hate how I can't read the bottom paragraph of a book in the Kindle app in the centre of the monitor; I have to bend my neck down and it gets sore fast. Problem is that I can't move the Kindle book page up or halfway as when I'm reading a PDF document; if you try to move the page in Kindle it skips to the next new page. So, I thought maybe converting my books to PDF will solve the problem. How do I convert Kindle books into the PDF format? Does anyone have another solution? Perhaps a fancier reader that allows me to scroll Kindle book pages? Windows 7 64-bit IE 8

  Read the article

• How to Unblock Previously Unblocked CHM File

  - by OnesimusUnbound

  Wierd? Anyway, on Windows 7, I've downloaded a CHM file on the desktop and unblocked it by Property > Unblock. I moved the CHM file to a folder on the desktop to organize the files, and when I opened the file, the content of the CHM reader couldn't open the pages in the CHM file. I've open the file property, but the unblocked button is gone. Well, I can simply download the file, though I find the problem interesting and I need to know how to troubleshoot it. So, how can I unblock the said file? Update Clarified location. I was referring to a folder in the desktop, not in network drive.

  Read the article

• dhclient and dhcpcd the real difference

  - by rubixibuc

  I can't figure out the difference from just the man pages. I can see what is a daemon and one is a client, but what does that mean practically when using the commands? Also what is the difference between the client and daemon in this case, not just the terms (client and daemon) but functionally wise? EDIT: How are the tasks divided, if the client updates the information on the client, what is the purpose of the daemon. I'm talking about the client daemon in this case dhcpcd not dhcpd. Both come installed by default with some versions of Linux and seem to share the duties of the dhcp client. NAME dhcpcd - DHCP client daemon Name dhclient - Dynamic Host Configuration Protocol Client

  Read the article

• Laptop connects to other network but not to my home wireless

  - by Nilesh

  My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

  Read the article

• IIS: Content-Length 0 for CSS, Javascript and Images

  - by Adrian Grigore

  After a clean re-installation of my Windows 7 system, I can't get IIS 7 to properly deliver any static content. Dynmic content (ASPX pages and content served by ASP.NET MVC controllers) works fine, but static files such as CSS, Javascript and Images give me a 200 OK status code and a Content-Length of 0. The problem occurs with all web sites on my server, even a brandnew ASP:NET MVC template project with no changes. It also occurs with both Firefox and IE 8. What could possibly be the problem? Note that I also installed the latest Windows Azure SDK, perhaps that messed up some settings. But I don't know how to proceed with for troubleshooting this.

  Read the article

• Why would searching in Websphere Portal Administration exclude some results?

  - by Scott Leis

  I have logged into a website based on Websphere Portal 6.0, gone to the Administration console, then to Portlet Management - Portlets. At a guess, there are about 200 portlets on this server. 22 portlets have a title starting with "IGM", but if I use the "Title starts with" search option and enter "igm" (or any case variation), only one of these portlets is found. The portlets excluded from the "Title starts with" search are also excluded from the "Title contains" search, but some of them can be found with the "Unique name contains" search (noting that only 5 of these have a unique name). Why would title searches exclude these portlets? I also see similar behaviour in other areas of the Portal administration. E.g. going to Portal Settings - Custom Unique Names - Pages, and performing title searches excludes some results, depending on the search terms entered.

  Read the article

• Website hosted on IIS is not accessbile

  - by Tola Odejayi

  I have two sites set up in IIS on a remote machine RM; one on regular port 80, and the other on port 5773. From my local machine LM, I can access the site on 80, but I cannot access the one on 5773; I get a status code of 502 and an error code of 10060 (A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond) when I try to do this. I can access the 5773 site via IIS when I am logged into RM (i.e. by right clicking on a page on the site and going 'Browse'). I can also access pages on the 5773 site via a browser, again when I am logged into RM. I just can't do the same via a browser when I am logged into LM. I have ensured that port 5773 is open for outgoing traffic on LM. Could the problem be that I also need to ensure that port 5773 is open for inbound traffic on RM?

  Read the article

• Set preferred language in Chrome and other Google services

  - by Super Chicken

  Whenever I'm abroad and access Google's search (via Chrome browser, on my own laptop) or other Google services, they are presented to me in the local language. How can I get Google services displayed in English and instruct Chrome to use google.com (instead of the country-specific site)? My language setting in Windows is English, so Chrome should already use this by default, and I've also set my language preference in iGoogle to English (U.S.), yet if I'm in France, for example, my searches take place on google.fr and sites like the Google News are in French. Chrome tries to be helpful by suggesting to translate these pages for me, but it would be far better to direct to the original English version of these sites in the first place. How do I fix this?

  Read the article

• How to track usage of a HP Network Printer?

  - by NinethSense

  I have a HP Printer (HP Color LaserJet CM1312 MFP Series PCL 6) installed which is used by nearly 200 PCs through LAN. I want to track the usage like: Who (IP Address) initiated the print task Time Status: Success or Failure How many Pages Color or Gray Scale etc. I checked the manuals and nothing about this requirement is available. The built-in control panel log displays only last 10 activities. Is there a way to track these information? Is there an API avaialble so that I can make an application myself?

  Read the article

< Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234  | Next Page >