Search Results

Search found 24731 results on 990 pages for 'corner case'.

Page 227/990 | < Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234  | Next Page >

• Custom MS-DOS / FreeDOS

  - by user1801387

  Goal : Build a custom DOS to boot into. To automate tasks like formating a drive, or doing recovery. I've been using Grub4DOS to boot into these images. So far I've looking into taking a windows repair disk ISO and extracting. I can't seem to find the autoexec.bat in the disk. I really don't know where to look for the startup configuration file to change or how to add an autoexec.bat. I've tried MS-DOS 6.22. But it lacks the diskpart tool I require. I've tried extracting the images and adding it. Then I got a boot failed. I assume that after i added it. All the files when to lower case names and I assume that the OS is case sensitive. Then I've looking into using FreeDOS. But I don't know how it works at all. Partially because I can't seem to grasp the help/wiki's information. I looked into getting a bearbones release with just the kernel and I think it's the config.sys file. But I don't have any idea on how the packaging system works to incorporate diskpart into it. So really I'm in general looking for a small bootable DOS to where I can incorporate diskpart and setup an autoexec.bat for the actual function to carry out and to boot into. Thanks :) This is just for personal use also.

  Read the article

• Adobe premiere CS5 problem with the display driver

  - by user30179

  This error is really hindering our project. I get an error, it started showing-up June 16th 2010. There are no windows updates at the on the same date as the error, other than (Windows Defender) Seems to happen when working with Image overlays. ERROR: "The NVIDIA OpenGL driver detected a problem with the display driver and is unable to continue. The application must close." We opened the side of the case in the possibility there is an over heating problem. Nvidia Driver ver 8.16.11.9175 (nVidia Quadro FX 1700) I am running: Windows 7 x64 Adobe premiere CS5 Production nVidia Quadro FX 1700 (MRGA14L) 4 Gig ram RAID 10 2 750GB drives Duo core 3.0 6MB L2 Cache This is at least three other people that have come across this error: NVidia Forum EVGA Forum NVidia Forum UPDATE: Having the case open did not help. I also installed New Nvidia drivers now I get a different error: *ERROR:*Your hardware configuration does not meet minimum specifications needed to run the application. The application must close. I ran Windows Update and installed all four updates so now I am waiting to see if the error occurs again. Anything beyond this I am out of options.

  Read the article

• Using modem for sending voice recording

  - by ircmaxell

  I've got an interesting one for you. I've been going over my server monitoring and notification systems (Nagios based), and realized that if our internet connection goes down, there's no way for it to notify me. I already have a modem listening (Via CentOS 5) on a spare POTS line so that I can dial-in in case our internet goes down. I was wondering if I could come up with a script (Shell, Python, etc) that can dial out and play a recorded message (wave file I'm guessing) when it's picked up. I know Windows supports voice calls over a voice modem, I was wondering if a solution existed for Linux... I know asterisk can probably do it, but isn't that overkill (A full blown VOIP system just for a notification mechanism that will hopefully never be used)? And wouldn't it interfere with the modem's primary function as a backup network interface (PPP spawned via mgetty)? I've done some searching, and haven't really come up with much. I know how to dial out from the command line, but only as a modem (not as voice). Worst case, I could set it up to dial out as a modem, and then just realize that if I get a call with modem sounds from that number that it's the notification... Any insight would be appreciated...

  Read the article

• Coffee spilled and went inside CPU...computer not starting

  - by Harpreet

  Today coffee got spilled over my table, and some of it (very less) reached the CPU placed under the table. I think little bit of it got inside the CPU through the front face of the CPU. As that happened the fan started running very fast and made noise. I tried to restart to see if it becomes fine, but the computer didn't start again. First it gave an error of "Alert! Air temperature sensor not detected" and didn't start. Next I tried again multiple times of starting the computer but then it gave some memory error. I was not able to start the computer. Incase there's a problem in hard disk or something related to memory, is there any way we can extract our work or data? I am scared if I am not able to extract my work in case some problem occurs like that. What options would I have? Help! EDIT: I have attached the photo here and you can see the area spilt in red circle. The hard drive electronics have been affected and internal speaker may also have been affected. Any advise on cleaning and if hard drive can work? EDIT 2: Are there any professional services offered to extract data from blemished hard disk, like this one, in case I am not able to run it personally?

  Read the article

• How do I setup routing for 2 companies with different Internet connections on the same LAN?

  - by Clint Miller

  Here's the setup: 2 companies (A & B) share office space and a LAN. A 2nd ISP is brought in and company A wants it's own Internet connection (ISP A) and company B wants it's own Internet connection (ISP B). VLANs are deployed internally to separate the 2 company's networks (company A: VLAN 1, company B: VLAN 2, shared VOIP: VLAN 3). With separate VLANs it's simple enough to use separate DHCP servers (or separate scopes on the same server) to assign the default gateway to each company's gateway for their Internet connection. Static routes can be created on each gateway to point traffic destined for the other company's VLAN or the voice VLAN so that all nodes are reachable as expected. However, I think this is a form of asymmetrical routing, right? (The path from node A1 to node B1 is not the same as the path back from node B1 to node A1). Can I setup policy-based routing to correct this? In that case, can I assign the same default gateway to every device on all VLANs and create a routing policy on a L3 switch to look at the source address and forward traffic to the appropriate next hop? In that case, I want the routing logic to go like this: If the destination address is known, forward the traffic (traffic destined for a different VLAN). If the destination address is unknown, forward the traffic to ISP A's gateway if the source address is on VLAN A; or forward the traffic to ISP B's gateway if the source address is VLAN B. Am I thinking about this problem in the correct way? Is there another way to solve this problem that I am overlooking?

  Read the article

• Magnetic Stripe Reader over Terminal Server has random Uppercase/Lowercase nonsense

  - by Peter Turner

  The Magnetic Stripe Reader that I'm using and testing is just supposed to be sending keystrokes. Unfortunately, it seems to randomly be sending upper case and lower case keystrokes, sometimes substituting % for 5 and ^ for 6 and vice versa. (If you've ever programmed for a magnetic strip reader, you know that's not a good thing.) Is there something in the RDP protocol that causes this? I've got kind of a convoluted system, running XP inside virtualbox on Fedora 11 RDP'ed into a win2k3 server. It works on the XP VM and it doesn't work on the RDP'ed one. What's weirder, is that I'm not even emulating the USB drivers for my Mag Card Reader. Linux is sending keystrokes straight in to windows, and MSTSC on windows XP is sending crap to the Win2k3 server. I'm 99% certain this isn't a problem with the card reader, it has nothing to do with my programming either. (I get the same junk coming into notepad that I get coming into our software [that's why I didn't ask on SO]). And, it works with rdesktop programs other than MSTSC.exe! Needless to say, I'm in need of some RDP Guruship.

  Read the article

• Problem restoring from tar backup: why are there /dev/disk/by-id/ symlinks and how can I avoid them?

  - by SK.

  Hello, I'm trying to make a bare-bone backup system with the most basic tools available on openSUSE 11.3 (in this case: bash, fdisk, tar & grub legacy) Here's the workflow for my scripts: backup.sh: (Run from external system, e.g. LiveCD) make an fdisk script ($fscript) from fdisk -l's output [works] mount the partitions from the system's fstab [works] tar the crucial stuff in file.tgz [works] restore.sh: (Run from external system, e.g. LiveCD) run fdisk $dest < $fscript to restore partitioning [works] format and mount partitions from system's fstab [fails] extract from file.tgz [works when mounting manually] restore grub [fails] I have recently noticed that openSUSE (though I'm sure it has nothing to do with the distro) has different output in /etc/fstab and /boot/grub/menu.lst, more precisely the partition name is for example "/dev/disk/by-id/numbers-brandname-morenumbers-part2" instead of "/dev/sda2" -- but it basically is a simple symlink. My questions about this: what is the point of such symlinks, especially if we're restoring on a different disk? is there a way to cleanly prevent the creation of those symlinks and use the "true" /dev/sdx everywhere instead? if the previous is no, do you know a way to replace those symlinks on the fly in a text file? I tried this script but only works if the file starts with the symlink description (case of fstab, not menu.lst): ### search and replace /dev/disk/by-id/... to /dev/sdx while read oldVolume rest; do # get first element, ignore rest of line if [[ "$oldVolume" =~ ^/dev/disk/by-id/.*(-part[0-9]*$)? ]]; then newVolume=$(readlink $oldVolume) # replace pointer by pointee, returns "../../sdx" echo /dev/${newVolume##*/} $rest >> TMP # format to "/dev/sdx", write line else echo $oldVolume $rest >> TMP # nothing to do fi done < $file mv -f TMP $file # save changes I've had trouble finding a solution to this on google so I was hoping some of the members here could help me. Thank you.

  Read the article

• backup of TFS with DPM 2007 - different backup times

  - by user46516

  I have DPM set up to back up my TFS server every 30 minutes, the reason being it's a way better interface than the quirky SQL backup interface. I also do a full backup nightly using an SQL maintenance job. My thinking is I would use DPM to restore my databases in case of losing my database and the nightly full backup would be a "just in case" the DPM restore doesn't work. I was thinking a little harder about this set up today and started to think about the fact that the DPM backup of the individual databases happens at different 30 min windows.. i.e. one happens at 13h30, another at 13h34 etc. Would this difference in time be a problem when it comes to restoring the TFS server? If I restore the databases and they are from different times, will this create corruption with pointers in one database pointing to missing items in the other database.. do the databases even rely on each other or are they completely interdependant. Lastly, how would SQL (log) backup cope with this?

  Read the article

• Can't connect to Synology DiskStation through HTTPS when using Windows 7 Import

  - by LeonidasFett

  a little background to my problem: I have a Synology DiskStation 213j that I use as a backup/data storage solution. When I'm at work, I would like to push and pull files from my DiskStation but I can't use VPN which is forbidden for outgoing connections. So I wanted to try to use HTTPS so I can at least connect securely to the web interface. I mostly use Chrome which uses the Windows Certificate Store. So I tried importing a self-signed certificate into it, without success. I still get a warning in Chrome telling me the connection is not secure because it can't be verified. When I import the certificate into Firefox though, it works and I can connect through HTTPS. I checked my domain on this site: http://www.sslshopper.com/ssl-checker.html It shows no errors, only a warning that the certificate is self-signed. Which is OK in this case. Any got any idea why importing the certificate into Windows 7 doesn't work? I tried Right-Click domain.mydomain.de.crt File --> Install certificate --> Next --> both options here (in case of "Place certificate in following store:" I selected "Third Party Root Certificate Authorities") to no avail.

  Read the article

• PC freezes after repeated clicking noises

  - by Péter Török

  I have an oldish PC (Athlon XP 2200, WinXP). Every time I switch it on, I hear a loud "click" first of all, and when it is shut down, again a click is the last sound I hear. Lately it started to behave erratically: it started to click loudly in the middle of a session. First only once in a while, then repeatedly for several seconds in a row, and finally it froze completely. We were not doing anything particular during these times, usually just browsing the web. This has already happened twice in a few week's time period. We typically use it only in the evenings, so when the freeze happened, I just decided it is time for the bed. When it was started up the next day, everything looked fine. Any hints on what could be the culprit? Could it be caused by an ageing heat fan, or dust that has accumulated inside the case? We are backing up all the data stored on it, and then will open the case to look inside, but I thought it would be good to get some background info first of all.

  Read the article

• OpenSolaris livecd, NForce NIC driver, and NTFS USB mounting. Oh My!

  - by Jake Wharton

  I'm attempting to install OpenSolaris 2009.06 on my server. Before I do I would like to test that everything works and am running in to problems. It has an Abit AN-M2 motherboard with an NForce chipset. The driver config utility says that I need a third-party driver and links me to http://homepage2.nifty.com/mrym3/taiyodo/eng/. Scrolling to the bottom, I have downloaded both tgzs just in case. Now the fun part: The only way to get this on to the computer is via a USB drive since I can't access the network. Also, install CD in the drive otherwise I'd just burn them to DVD. Since my USB key is NTFS formatted I cannot mount it since the install CD seems to be lacking NTFS drivers which require more downloaded packages. What should I do? The server will simply be a dumb NAS and I know that there exists other OpenSolaris-based flavors such as Nexenta but from what I read the stock install is likely the best. If this is not the case and pursuing a different flavor is required or better I will also accept that as an answer (but please don't jump straight to it).

  Read the article

• PowerPoint avoid animation completion on click & advance slide or start new one

  - by ScottS

  Scenario I have PowerPoint 2010 On the "Transitions" tab the "Advance Slide On Mouse Click" check box is checked. I have a long, slow, timed, non-repeating animation working in the background of the slide. I click to advance the slide before the animation is finished, but ... Instead of advancing the slide, the animation moves to the completed state ... Forcing a second click to actually advance the slide. Additionally If I have other animations on the slide that are initiated by a click, the long animation also advances to a finished state before starting the new animation. Desired Behavior On click, I want the slide to advance or the next on-click animation to start whether the long animation is done or not, and without having that long animation first "complete" itself. In the case of another animation, I simply want the long animation to continue, while also doing the new animation. Ultimate Question Is there a way to either: Set an option somewhere to not have that animation complete on click and simply "continue" to animate with the start of a new animation or to advance the slide (as the case may be)? Create a VBA script that will produce the desired behavior for the long animation?

  Read the article

• Possible DNS Injection and/or SSL hijack?

  - by Anthony

  So if I go to my site without indicating the protocol, I'm taken to: http://example.org/test.php But if I go directly to: https://example.org/test.php I get a 404 back. If I go to just: https://example.org I get a totally different site (a page about martial arts). I went to the site via https not very long ago (maybe a week?) and it was fine. This is a shared server, as I understand it, and I do not have shell access, so I'm limited to the site's CPanel to do any further investigations. But when I go to: example.org:2083 I'm taken to https://example.org:2083, which, if someone has taken over the SSL port, could mean they have taken over the 2083 part as well (at least in my paranoid mind). I'm made more nervous by the fact that the cpanel login page at the above address looks very new (better, really) compared to the last time I went to it over the weekend. It's possible that wires got crossed somewhere after a system update, but I don't want to put in my name username and password in case it's a phishing attempt. Is there any way to know for sure without shell access to know for sure if someone has taken over? If I look up the IP address for the host name, the IP address matches what I have on a phpinfo page I can get to over http. If I go to the IP address directly on port 2083, I get the same login mentioned above (new and and suspiciously nice). But the SSL cert shows as good when I go this route. So if that's the case (I know the IP is right, the cert checks out, and there isn't any DNS involved), is that enough to feel safe at that point of entry? Finally, if I can safely log in via the IP, does anyone have any advice on where to check first on CPanel for why the SSL port is forwarding to a site on karate? Thanks.

  Read the article

• Options for small windows network setup without dedicated server?

  - by Mitch

  I'm very weak on networking and hope someone can point me in the right direction: I have written some windows client/server software which incorporates a database which is located on a windows server. I have a test installation running at a customer's office where the server has a static IP address. In this case its easy for the clients to access the database because of the fixed IP address. Also, customers with network servers generally have specialist support staff to set up my software, so its not such a problem for me. However I also need to offer the software to customers who have small offices with less than 10 PCs and no dedicated network server. In this case I want the customer to be able to nominate one PC as the database "server" and install my software and have the clients access it. But in this situation I believe the "server" PC may not have a dedicated IP address. Q1: What is the best way to set this up simply and make it work? Can I reliably reference the "server" by using its name, or is there a way to assign dummy fixed IP addresses? Ideally this needs to be workable on small networks running a mixture of XP/Vista/Windows7 as my target market may well have mixed OSes etc. I guess this would be akin to home networking? Many thanks Mitch

  Read the article

• Linux authentication via ADS -- allowing only specific groups in PAM

  - by Kenaniah

  I'm taking the samba / winbind / PAM route to authenticate users on our linux servers from our Active Directory domain. Everything works, but I want to limit what AD groups are allowed to authenticate. Winbind / PAM currently allows any enabled user account in the active directory, and pam_winbind.so doesn't seem to heed the require_membership_of=MYDOMAIN\\mygroup parameter. Doesn't matter if I set it in the /etc/pam.d/system-auth or /etc/security/pam_winbind.conf files. How can I force winbind to honor the require_membership_of setting? Using CentOS 5.5 with up-to-date packages. Update: turns out that PAM always allows root to pass through auth, by virtue of the fact that it's root. So as long as the account exists, root will pass auth. Any other account is subjected to the auth constraints. Update 2: require_membership_of seems to be working, except for when the requesting user has the root uid. In that case, the login succeeds regardless of the require_membership_of setting. This is not an issue for any other account. How can I configure PAM to force the require_membership_of check even when the current user is root? Current PAM config is below: auth sufficient pam_winbind.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth required pam_deny.so account sufficient pam_winbind.so account sufficient pam_localuser.so account required pam_unix.so broken_shadow password ..... (excluded for brevity) session required pam_winbind.so session required pam_mkhomedir.so skel=/etc/skel umask=0077 session required pam_limits.so session required pam_unix.so require_memebership_of is currently set in the /etc/security/pam_winbind.conf file, and is working (except for the root case outlined above).

  Read the article

• Is USB supported in safe mode on XP?

  - by Hugh Allen

  According Microsoft, "Universal Serial Bus Devices Do Not Work in Safe Mode" under XP. However, in my testing this is incorrect. USB keyboards, mice and flash drives seem to work fine in safe mode (I made sure the BIOS was not providing support). This makes sense because a failure of a standard input device would be, in Microsoft parlance, a "bad user experience". So, Is USB supported in safe mode on XP? If your answer is no (agreeing with Microsoft), please provide a test case, preferably in a virtual machine, where a standard HID keyboard or mouse fails. Please state hardware / BIOS / OS configuration. Note that you will need a PS/2 keyboard attached in addition to your USB device(s) in order to use the boot menu. Virtual machine software usually emulates a PS/2 keyboard. Alternatively, you could add the /safeboot switch to boot.ini. If your answer is yes, please provide a link to some supporting documentation (either from Microsoft or someone authoritative). Your answer might be "devices X, Y and Z are supported but nothing else", in which case also give a link.

  Read the article

• Do you really need cable management for a cabinet with just switches and patch panels?

  - by ObligatoryMoniker

  We are about to start wiring out a building expansion and our vendor has laid out the racks in the following configuration: Option 1 1U Fiber patch panel 2U Cable Manager 2U 48 port Patch Panel 2U Cable Manager 2U 48 port Patch Panel 2U Cable Manager 1U 48 port Switch 2U Cable Manager 1U 48 port Switch Total = 15U All the patch panels would be connected to the switches with 1ft+ cables fed through cable management. What I am considering instead is: Option 2 1U Fiber patch panel 1U 24 port Patch Panel 1U 48 port Switch 2U 48 port Patch Panel 1U 48 port Switch 2U 48 port Patch Panel Total = 8U All of the patch panels would be connected to the switches with .5 ft cables directly on their face with the top 24 ports of each switch patched to the patch panel above it and the bottom 24 ports of each switch patched to the patch panel beneath it which would not require any cable management. If I go with option 2 it save all of the space used by cable management and allows us to keep adding on switches and patch panels at the end without having to re-cable all of the patch panels above. Our vendor has indicated that this is not best practice and that .5ft cables will introduce cross talk. I could understand that being the case if we were connecting the .5 ft cable directly into another switch but we are connecting it to a patch panel that likely has another 150 ft cable run from the back of the patch panel out to the port in the building in which case the real resulting cable is 150.5 ft at minimum before even connecting it to a PC. It seems like it makes much more sense to go with option 2. It is easier to expand, saves space, and saves money on cabling and cable management. Does this kind of configuration make sense or is there a legitimate reason to choose Option 1 over Option 2?

  Read the article

• How to pass alias through sudo

  - by Tanktalus

  I have an alias that passes in some parameters to a tool that I use often. Sometimes I run as myself, sometimes under sudo. Unfortunately, of course, sudo doesn't recognise the alias. Does anyone have a hint on how to pass the alias through? In this case, I have a bunch of options for perl when I'm debugging: alias pd='perl -Ilib -I/home/myuser/lib -d' Sometimes, I have to debug my tools as root, so, instead of running: pd ./mytool --some params I need to run it under sudo. I've tried many ways: sudo eval $(alias pd)\; pd ./mytool --some params sudo $(alias pd)\; pd ./mytool --some params sudo bash -c "$(alias pd)\; pd ./mytool --some params" sudo bash -c "$(alias pd); pd ./mytool --some params" sudo bash -c eval\ "$(alias pd)\; pd ./mytool --some params" sudo bash -c eval\ "'$(alias pd)\; pd ./mytool --some params'" I was hoping for a nice, concise way to ensure that my current pd alias was fully used (in case I need to tweak it later), though some of my attempts weren't concise at all. My last resort is to put it into a shell script and put that somewhere that sudo will be able to find. But aliases are soooo handy sometimes, so it is a last resort.

  Read the article

• Build suggestion for mini itx server [on hold]

  - by Spyros

  I am looking to create a home server and since there does not seem to be a nice ready made one to purchase, i thought of building a mini itx one. I am not familiar with the best hardware/case to pick and therefore i thought i would ask for your experience. I will most probably install a simple linux distro, probably Debian and most probably without a desktop environment as well. Therefore, I am not looking for the best graphics card, though a decent one is preferred for sure. I would say that the most important thing is that the case/hardware play well with each other and the machine has decent specs ( i think something like 8gb RAM and 1TB hdd is most probably my most important things). I understand that this question can be closed as subjective, but it would be a great help for me if some of you guys who have been doing a similar build, can suggest something. I tried to find a stack exchange variant for the question, but it seems that this one more closely relates to the subject. But I will definitely understand it if people close it due to being subjective in nature. If you can maybe move it somewhere or so, please feel free to do so. Thank you for your time :)

  Read the article

• recursive grep started at / hangs

  - by Martin

  I have used following grep search pattern on multiple platforms: grep -r -I -D skip 'string_to_match' / For example on FreeBSD 8.0, FreeBSD 6.4 and Debian 6.0(squeeze). Command does a recursive search starting from root directory, assumes that binary files do not have the 'string_to_match' and skips devices, sockets and named pipes. FreeBSD 8.0 and FreeBSD 6.4 use GNU grep version 2.5.1 and Debian 6.0 uses GNU grep version 2.6.3. On FreeBSD 6.4, last information printed to stderr was "grep: /dev/cuad0: Device busy". After this grep just idles as according to "top -m io -o total" the I/O usage of grep is nonexistent. Same behavior is true under FreeBSD 8.0, but last information sent to stderr is "grep: /tmp/.wine-0: Permission denied" on my installation. In case of Debian, last output to stderr is "grep: /proc/sysrq-trigger: Input/output error". If I check the I/O usage of grep process under Debian, it is following: root@Debian:~# iotop -bp 22439 Total DISK READ: 0.00 B/s | Total DISK WRITE: 0.00 B/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 22439 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % grep -r -I -D skip 10.10.10.99 / Total DISK READ: 0.00 B/s | Total DISK WRITE: 0.00 B/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 22439 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % grep -r -I -D skip 10.10.10.99 / Total DISK READ: 0.00 B/s | Total DISK WRITE: 0.00 B/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 22439 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % grep -r -I -D skip 10.10.10.99 / ^Croot@Debian:~# What might cause this? Is there a way to view which file grep is currently processing in case lsof is not present? I'm able to use lsof under Debian and looks like the problematic file name there is "0xc6b2c230 file struct, ty=0, op=0xc0d34120". I'm not sure what this is.. I'm not able to use lsof or fstat under FreeBSD. PS: I know I could use find utility, but this is not the question.

  Read the article

• How can I find out if a port is opened or not?

  - by Roman

  I have installed Apache server on my Windows 7 computer. I was able to display the default index.php by typing http://localhost/ in the address line of my browser. However, I am still unable to see this page by typing IP address of my computer (neither locally (from the same computer) no globally (from another computer connected to the Internet)). I was told that I need to open port 80. I did it (in a way described here) but it did not solve the problem. First of all I would like to check which ports are opened and which are not. For example I am not sure that my port 80 was closed before I tried to open. I am also not sure that it is opened after I tried to open it. I tried to run a very simple web server written in Python. For that I used port 81 and it worked! And I did not try to open the port 81. So, it was opened by default. So, if 81 is opened by default, why 80 is not? Or it is? ADDITIONAL INFORMATION: 1. In my httpd.conf file I have "Listen 80". 2. This site tells me that port 80 on my computer is opened. 3. I get different responses if I try http://myip:80 and http://myip:81. In the last case browser (Chrome) writes me that link is broken. In the first case I get: Forbidden You don't have permission to access / on this server. 4. IE writes that "The website declined to show this webpage".

  Read the article

• Domain changes required for SSL integration

  - by user131003

  Currently my site supports regular payment options (User is taken to Payment Gateway/PG website). Now I'm trying to implement "seamless" PG integration. I need SSL for this. I'm having a dedicated server with 5 static IPs from Hostgator/HG. options: I take SSL for www.my_domain.com. According to HG, I need to change IP of main site as current IP is not really dedicated as it is being shared by cpanel etc. So They need to bind another dedicated IP to main domain for SSL to work. This would required DNS change for main website and hence cause few hours downtime (which is ok). I've noticed that most of the e-commerce websites are using subdomains like secure.my_domain.com for ssl/https. This sounds like a better approach. But I've got few doubts in this case: a) Would I need to re-register with existing PGs (Paypal, Google Checkout, Authorize.net) if I switch to subdomain? Re-registering is not an option for me. b) Would DNS change be required for www.my_domain.com in this case. This confusion arose because of following reply from HG : "If the sub domain secure.my_domain.com is added to an existing cPanel it will use the IP for that cPanel so as long as it is a Dedicated IP that will be fine. If secure.my_domain.com gets setup as its own cPanel it will need to be assigned to a Dedicated IP which would have a DNS change involved.". PLease suggest.

  Read the article

• Can I use a Windows Server 2003 Domain Controller but my home router for DNS?

  - by NetworkingWannabie

  Hi All Probably easiest to start with a description of my current setup, which works (oh, and this is a home setup not an office or anything): I have an ADSL modem with a static IP address (192.168.128.1), and its DHCP capability is disabled. I have a permanently powered up Windows Server 2003 machine with a fixed IP (192.168.128.2) which provides my domain controller, dhcp, and dns. The default gateway for everything is my ADSL modem everything is setup to use the WS2003 machine as the primary DNS with the ADSL modem as Secondary DNS just in case the server goes down (everything includes the server itself). Lastly, just in case it's relevant, I have my DHCP leases set to infinite (or whatever the right term is). Everything is pretty hunky dory. Except, that is, for the fact that my server is ALWAYS on, and it isn't always used, so I'm burning juice that I don't need to - my server burns around 120W which isn't immense but isn't irrelevant either, so I'd like to put it into a stand-by state when it isn't being used (the more standby the better) and then get the clients to wake it up. Am I correct in assuming that this won't work at the moment - A given client would need an IP address to wake the machine up, and it needs to machine to be awake to get an IP - catch 22? Assuming I'm correct, can I move to using my router (which is always on) for DHCP? What impact will this have on DC and DNS? Alternatively, does anyone have a better way for me to achieve this? Can I get the server to wake up when it sees clients look for a DHCP server, etc? Wow, that came out longer than expected! Thanks for your help.

  Read the article

• Making one of the folders default in Apache

  - by OmerO

  Hello, The file & directory structure of my website is as follows: /Library/WebServer/mysite/joomla .. /Library/WebServer/mysite/wiki .. /Library/WebServer/mysite/forum .. /Library/WebServer/mysite/index.php As you see, there are various applications each residing in separate folders. Now, in order to define this structure, I have made this entry in Apache http-vhosts.config file: ServerName mysite.com DocumentRoot "/Library/WebServer/mysite" ** And I already have the DirectoryIndex defined: DirectoryIndex index.html index.php, and so on. So far so good but I want this specific functionality: When someone visits mysite, he/she should automatically directed to: /Library/WebServer/mysite/joomla (and therefore /Library/WebServer/mysite/joomla/index.php) I don't want to achieve that functionality by putting a redirection code inside /Library/WebServer/mysite/index.php or /Library/WebServer/mysite/index.htm because that causes time delays (because of the redirection, of course) But in this case, the only proper way of achieving it seems to set DocumentRoot this way: DocumentRoot "/Library/WebServer/mysite/joomla" But when I set it that way, then the other folders (/wiki, /forum, etc.) are simply not served by Apache. To work around it, I put directives like: Alias /wiki /Library/WebServer/mysite/wiki .. Alias /forum /library/WebServer/mysite/forum and it did work actually the way I wanted. But... I still cannot use it that way because in this case I just couldn't manage to make the wiki use Short URLs (as described in link text) So, I have to set the DocumentRoot back to /Library/WebServer/mysite and shoud be able to assign /Library/WebServer/mysite/joomla as the "default directory" (my own terminology :) Can I do it in Apache? Is there any other way you might suggest? Thanks.

  Read the article

• grep --color=auto with -i option disables the matching text color, why?

  - by emptyset

  I was messing around with grep and put this in my .zshenv: export GREP_OPTIONS="--color=auto" export GREP_COLORS='mt=1;34' I was bonking my head on the keyboard and changing GREP_COLORS around for a minute trying to figure out why the folder colors were working, but the matching text wasn't. I was doing this: $ grep -R -n -i -e "functionFoo\(" --include=*.cs --exclude-dir=Logs * The line number and file names were set with the default colors, but the matching text wasn't. After spending way too much time, I thought to do this: $ grep -R -n -e "functionFoo\(" --include=*.cs --exclude-dir=Logs * (I removed the -i option.) That's all it took to get the matching text to correctly show up in bold blue. This is a Cygwin on Vista setup, with rxvt running zsh. Any idea why grep colors would break on specifying a case-insensitive match? Update: Under cygwin 1.7, it's a little bit better - case insensitive search works correctly, but it only highlights the word that matches the expression exactly. In other words, "FunctionFoo" highlights "FunctionFoo" but not "functionFoo" and vice versa. Probably a grep issue so I'll be submitting it to that list.

  Read the article

< Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234  | Next Page >