Search Results

Search found 19970 results on 799 pages for 'jason down'.

Page 227/799 | < Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234  | Next Page >

• Stop Windows 7 from accessing or writing to hard drive unless "told" to by me? (More info inside...)

  - by Jeff

  A confusing question, perhaps, but bear with me. I have two internal HDDs set up in a RAID0 array which I use as mass storage. I access the drive very infrequently (once a day at most) and so I have set up Windows 7's power options to turn off idle disks after only 1 minute. This is fine, and the disks are turned off most of the time. However, I notice that Windows sometimes spins up the drives when I really, really don't want or need it to. This causes a 30 second delay as both drives spin up and lock up my system. Some examples of when this happens: 1) When I'm installing something using Windows Installer or Installshield; it seems to me as if they're using the drive with most available free space as the installer cache location... so my big RAID drive has to spin up! Most annoying. 2) Apparently, when I open a Java-based program which resides on my system drive and has nothing to do with my RAID drive! 3) At boot-up and shut-down time. At shutdown the drive spin up only for the computer to immediately shut down! Incredibly frustrating! I've already tried changing the letter of the drive, and at some points have removed the drive letter entirely, which solves the first two issues above. So my question (FINALLY!) is this: is there any way I can mark this drive as being for "storage only", so Windows basically does not see it at all until I actually invoke it somehow? Or is there any way I could set it up so that only specific programs have write access to it? For example, download managers, TeraCopy, etc. etc.? Basically I want it to be a "ghost drive" until I'm ready to use it and to stop Windows from spinning it up all the damn time! Thank you. :)

  Read the article

• Windows 2008 R2 DNS cant resolve own SOA

  - by user46742

  We have two Domain Controllers for our network. They both run DHCP, DNS, and ADS. They are both VM's sitting on MS Hyper V Server 2008 on separate physical hosts. We had our primary DC go down a week ago. I upgraded an already existing VM to Primary DC and built a new VM for the secondary. Both DNS servers are running and the SOA is configured correctly for Primary DC 1. However when I run the best practice analyzer it states the server cannot resolve it's own SOA. Check the configuration in the adapter. I checked and they are configured properly. I also went through the DNS entries thoroughly and made sure there was no records of the previous DC that went down. NSLOOKUP resolves the domain and primary dc fine. I also checked the firewalls on the machines and our physical firewall for any deny packets. Any suggestions? I appreciate any help!

  Read the article

• How can I prevent a DDOS attack on Amazon EC2?

  - by cwd

  One of the servers I use is hosted on the Amazon EC2 cloud. Every few months we appear to have a DDOS attack on this sever. This slows the server down incredibly. After around 30 minutes, and sometimes a reboot later, everything is back to normal. Amazon has security groups and firewall, but what else should I have in place on an EC2 server to mitigate or prevent an attack? From similar questions I've learned: Limit the rate of requests/minute (or seconds) from a particular IP address via something like IP tables (or maybe UFW?) Have enough resources to survive such an attack - or - Possibly build the web application so it is elastic / has an elastic load balancer and can quickly scale up to meet such a high demand) If using mySql, set up mySql connections so that they run sequentially so that slow queries won't bog down the system What else am I missing? I would love information about specific tools and configuration options (again, using Linux here), and/or anything that is specific to Amazon EC2. ps: Notes about monitoring for DDOS would also be welcomed - perhaps with nagios? ;)

  Read the article

• Server 2008 R2 boot is at 2 hours and counting. What now?

  - by Jesse

  This morning, we rebooted our Server 2008 R2 box. No problem, came right back up. Then we shut it down and let it install windows updates. While it was off, we added some RAM. Then we turned it back on. The system came right back up to the "press ctrl-alt-delete" screen, so far, so good. I logged in. The system got as far as "Applying Group Policy" -- then spent almost an hour applying drive mappings. Finally finished that, and has now spent 30 minutes on waiting for the Event Notification Service. I still haven't been able to log in. Remote desktop service doesn't appear to be running yet. I tried viewing the event log from another machine. I see that the box is writing to the Security log, but there are no events in System or Application in the last 45 minutes. Digging through the System log of events from 45 minutes ago, I see a bunch of timeouts: A timeout (30000 milliseconds) was reached while waiting for a transaction response from the ShellHWDetection service. [lots of these] A timeout (30000 milliseconds) was reached while waiting for a transaction response from the wuauserv service. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the SessionEnv service. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Schedule service. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the CertPropSvc service. What can I do? Should I try shutting it down remotely, or will that do more damage?

  Read the article

• Upgrade or replace?

  - by Felix

  My current PC is about four years old, although I have made upgrades to it throughout its existence. The current specs are: (old) Intel Pentium D 2.80Ghz (32K L1 / 2M L2), Gigabyte 945GCMX-S2 motherboard (old) 2.5GB DDR2 (slot0: 512MB @ 533Mhz; slot1: 2GB @ 667Mhz) (new) HIS Radeon HD 4670 - I think this is limited by the motherboard not supporting PCIe 2.0 (?) (old) WD Caviar 160GB - pretty slow (new) WD Caviar Black 640GB (if any more specs are relevant, let me know and I'll add them) Now, on to my question. I've been having performance issues lately, both in video games and in intensive applications. A couple of examples: Android application development (running Eclipse and the Android emulator) is painfully slow (on Linux). I only realized this when, at my new job as an Android dev, both tools are MUCH quicker. (I'm not sure what CPU I have there) The guys at my new job got me NFS Hot Pursuit, in which I barely get like 5-10FPS, even with graphics options turned all the way down My guess is that the bottleneck in my system is my CPU, so I'm thinking of upgrading to a Quad Core i5 + new motherboard + 4GB DDR3 (or more, 'cause I know you'll all jump and say 8GB minimum). Now: Is that a good idea? Is my CPU really a bottleneck, or is the whole system too old and I should replace it? I run Windows 7 on the old, 160GB HDD (which is on IDE, by the way). Could this slow down games as well? Should I get a new drive for Windows if I want to play new games? I know nothing about power supplies. Could that be a problem / will it be a problem if I upgrade to an i5? How come DiRT2 works on full graphics settings (pretty amazing graphics by the way) and NFS Hot Pursuit pulls only 5-10FPS?

  Read the article

• Is my motherboard failing, or is there some other issue?

  - by ThatGuy

  So, several months ago I put together my own desktop PC. I set up a dual boot to Windows and Ubuntu. Recently, without changing any settings or installing anything new, the wifi stopped working on windows (I use a wifi adapter). It said it was connected, Network settings showed that it was working and running trouble shooting had no results. My internet still works on any other device. I found that removing the adapter from the motherboard and plugging it back in was the only thing that fixed the problem. Reinstalling the wifi drivers did not help. I purchased a new Wifi adapter, but the problem persists. More recently, I had a much more discouraging development. Sometimes, turning on the computer results in a boot loop: BIOS never starts. Instead, the monitor turns on as if it got a signal, then immediately turns off. This loops on it's own indefinitely until I hold down power, hard reset it, and try again. Sometimes it works, sometimes it doesn't. I haven't tested much on the Ubuntu side. It appears that wifi works at least some of the time, but since I've had issues just getting to BIOS I'm not confident the issue is on the software side. I've also noticed issues with some of the USB ports no longer working, but that seems to be off and on. Finally, as of a few minutes ago, I booted to windows to discover that everything was running very slowly. Slow here is a relative word, but I have a Samsung 840 pro SSD and I'm used to applications running nigh instantly, and it was a solid 3 minutes before any of my applications would load. Anyway, my question is this: Is it likely that my motherboard is failing? Either way, what steps can I take to try and pin down the problem and figure out what to do?

  Read the article

• converting apache rewrite rules to nginx for xenforo

  - by nick

  Hi all, I am migrating some forums from vbulletin 3.8.x to xenforo, and trying to keep my old link structure alive. Basically, XF provides some php files that I can redirect the old url style to and it handles the proper 301 redirection. Regardless of that end, I am having difficulty rewriting the rules which I can only find defined in apache's rewrite style: RewriteRule [\d]+-[^/]+/.+-([\d]+)/([\d]+)/ showthread.php?t=$1&page=$2 [NC,L] RewriteRule [\d]+-[^/]+/.+-([\d]+)/ showthread.php?t=$1 [NC,L] RewriteRule ([\d]+)-[^/]+/([\d]+)/ forumdisplay.php?f=$1&page=$2 [NC,L] RewriteRule ([\d]+)-[^/]+/ forumdisplay.php?f=$1 [NC,L] I have been experimenting and thought this should work, but obviously not: if (!-e $request_filename) { rewrite [0-9a-zA-Z\-]/[0-9a-zA-Z\-]-([0-9])/([0-9])/ /showthread.php?t=$1&page=$2 last; rewrite [0-9a-zA-Z\-]/[0-9a-zA-Z\-]-([0-9])/ /showthread.php?t=$1 last; rewrite ([0-9])-[0-9a-zA-Z\-]/([0-9])/ /forumdisplay.php?f=$1&page=$2 last; rewrite ([0-9])-[0-9a-zA-Z\-]/ /forumdisplay.php?f=$1 last; rewrite ^(.*)$ /index.php last; } old vB showthread format: website.tld/233-website-issues-requests/wiki-down-73789/ new XF showthread format: website.tld/threads/the-wiki-is-down.65509/ old vB forumdisplay format: website.tld/233-website-issues-requests/ new XF forumdisplay format: website.tld/forums/website-issues-and-requests.253/

  Read the article

• Fans still running after shutdown after upgrade to Windows 8

  - by docaholic

  I'm running into a really annoying issue after upgrading from Windows 7 to Windows 8. I first noticed it during the initial (clean) install; when the installer tried to reboot, my machine (an acer aspire 4755G) just hung after the initial shutdown. That is, after the screen turns off, the power lights and fans are still running, and the machine itself doesn't restart. (I let it sit for a good 15 minutes, and it still didn't change) I managed to do a hard reset (power button for 5 seconds) and the install finished, but every shutdown/restart has been like that. Interestingly enough, hibernate works just fine. I've looked at other solutions where it said to use the bcdedit /set disabledynamictick yes and that didn't work. I also turned off the "Fast Boot" option in the power settings menu. That didn't work either. So far, the only option is to do the hard shut down by holding down the power button, but that proves to be horribly inconvenient. Any ideas on what's going on here?

  Read the article

• IIS Web Farm Framework servers are automatically set to "unavailable" even when they are healthy... And they never return to the available state!

  - by JohannesH

  I have 2 web farm configurations, one with 2 member servers and one with 3 member servers. I have health monitoring set up on both farms and the monitoring tool reports all servers as being healthy. However after a while all the servers are marked as being "Unavailable" and "Healthy" in the "Monitoring and Management" screen (in the "Servers" screen they are all listed with "Yes" in the "Ready for Load Balancing" column). Viewing the event log on both the web farm controller or any of farm servers doesn't reveal anything interesting. there are no warnings or errors in the period where the servers became unavailable. There are a couple of informational events about the worker process getting shut down due to inactivity but I don't hope this is the cause since that would mean that the farms will die during the night when the load is low. Am I missing something? EDIT: Btw, I think its very odd that the application pool shuts down on the servers since the health monitoring system is polling an aspx page on each server. Shouldn't that keep them going? EDIT2: Now I've also experienced this problem with the RTW version of Web Farm Framework 2.

  Read the article

• Windows7: Howto force a "do you really want to shutdown?" dialog

  - by Vokuhila-Oliba

  Sometimes I wanted to choose "logout current user", but then I hit "Shutdown" by accident. Nearly everywhere else Windows7 is asking "do you really want to do this Yes/No". But that's not the case when I hit the "Shutdown" button. Windows7 shuts down immediately without giving me the chance to correct my mistake. Q1: So I am wondering why Windows7 shuts down immediately without asking "really do that?" in this case. Q2: Is there a way to change this behavior? E.g. Could I force Windows7 to display a dialog asking "Do you really want to shutdown ?". ADDED: I am running Windows7 Professional 64bit. ADDED: I tried to change this behavior with the policy editor. It seems to be very easy to completely remove the Shutdown button from the start menu. But I couldn't find an entry to turn on such a Yes/No dialog.

  Read the article

• What are possible results/side effects if replication between DC's in a Windows domain is unable to occur?

  - by hydroparadise

  There's plenty of administration literature out there how to properly manage Windows servers. But in dealing with real life, things don't always occur like you want them to. In Microsoft's Windows Server 2003 Administrator's Companion, out of 1400+ pages, theres only one page that I could find when it comes up setting up additional domain controlers. They make it sound seemless and don't reveal a whole lot on what happens if "peer" DC's are unable to replicate. Down to the specific issue at hand, we had a DC go down about a month ago due to a bad RAID controller. There was nothing critical that waranted imediate attention, so bringing it back up got put on the back burner. A month later, we get the DC back up and running and everyting seemed ok. The next day, nobody is able to logon complaining that the "user does not exist" or "unable to establish a trust relationship". Knowing that I had just put the downed DC back on the network, I immediately took it back off the network and had everybody restart the workstations. After that, exchange was fine, shares became available, and everybody was able to log in. After doing some event log swimming, it would appear that everything started due to replication issues on the SYSVOL. I've read where you can force replication, but that would mean putting it back on the network. I am afraid to put the DC back on the network in fear that something else could go wrong. So, what other issues could one expect to run into where two DC's are unreplicated for over a month?

  Read the article

• Windows xp blinking under score after bios

  - by heyjoe

  so this is for an older pc I have to repair for a friend. The pc has an hdd of about 60 something gb, It uses win xp and let's say 60-70% of the boots it hangs on showing only an underscore bilking line after bios screen, rest of the times it boots fine or the computer shuts down on xp loading screen. Sometimes if you let it alone while the underscore is blinking, it will boot after a while, like a few minutes, some times it won't boot at all even if you give him more time, like one hour. When it boots successfully the pc seems to work fine. I think it's a bad hard disk and i'm about to suggest buying a new one and switching it but I don't have enough experience and i would hate making him buy a new hdd and not solving the problem. anyone has any tips? I know there are other topics about blinking underscores or cursors while xp is booting but the issues about the pc shutting itself down or sometimes booting really freaks me out. Can't format everything and re install until about 10 days from now, cause the dude has some program for his business on this pc and I have to migrate it when the next computer arrives, however he needs to use it until then. so please advise, thx.

  Read the article

• VPN: Disable class based route addition for Windows XP/Vista

  - by brgsousa

  Paraphrasing this SuperUser link: When you set up a VPN, the Windows default is to enable "Use default gateway on remote network." A new default route is added to the routing table pointing to the remote network's gateway, and the existing default route has its metric increased to force all Internet traffic to traverse the tunnel and use the remote network's gateway. All traffic uses the VPN, and traffic destined for the outside world is directed to the remote gateway. When the VPN drops, the route to the remote gateway is removed and the original default route is set back to the original metric. Unchecking "use default gateway on remote network" means that new default route isn't added, so Internet traffic goes out the local gateway, but a new classful route is added to the routing table, using the local adapter's IP, pointing down the VPN. Only traffic destined for the classful network of the local adapter goes down the VPN. This may not be what you want. Checking "Disable class based route addition" means that classful route isn't added to your machine when the VPN starts up, and you'll need to add the appropriate routes for networks that should be routed through the tunnel. But, the option "Disable class based route addition" is available ONLY for Windows 7. How can I do something like that for Windows XP or Vista since they don't have that option? I have searched about for that but, no solution yet.

  Read the article

• Ubuntu server 10.04 disconnects after short periods of inactivity on my site

  - by user57019

  I'm new to Ubuntu (installed it for the first time just a couple of days ago on my server). I've Ubuntu Server 10.04 and am just using the terminal, no GUI like Gnome. So far it's working pretty great except for one big thing. Whenever I go to sleep and there's no activity on my server (it's not a big site so active users drop to 0 during the night), the server kind of disconnects. The only thing that can bring the site back online is to restart the whole server. I've tried disabling powersaving by using setterm but that changes nothing. Even if I wake up the server by pressing any key or so the site wont go back online! I've tried just restarting both Apache and MySQL (I'm using LAMP-server btw) but not even that works. But as soon as I turn the power off and on at the server, everythings work like normal for a couple of minutes of inactivity (~5-15 minutes I'd guess) and then it's down again unless someone logs in to the site and is active. I was previously using XAMPP on my laptop with Windows XP and that worked 24/7 so I don't think it's anything with my router or ISP. This is driving me crazy! My site is down all the time I'm in school as I have no possibility to restart the server if it becomes offline. Does anyone have a clue to what could be wrong?

  Read the article

• What method of MySQL mirroring should I use for this?

  - by user45745

  I'm running an web application hosting service (basically hosting forums for free), and I have two remote servers at my disposal. The code for the application is stored on both servers and isn't a problem, but I'm wondering how to deal with the databases. When someone goes onto a site *.example-host.com, they are sent to one of the two servers and both must be capable of loading the forums from a database. The database must also have write access, for when new members register or post topics etc. The main requirement is speed, but uptime is also important (if a server goes out, the site should still work). I have a few options, but I'm inexperienced and not sure which to go with: 1) [PHP] Split the forum records 50:50 between the two servers. If a server does not have the record for a forum requested, it can request it from the other by remote MySQL and load it. This idea sounded okay, until I realised that 50% of the time, users would be waiting significantly longer for pages to load. I also realised that if one of the servers went down, half the forums would be inaccessible and registrations would have to be disabled. 2) [MySQL] Dual master replication. This would attempt to mirror the two databases and sounds perfect, but I've heard that it can be very problematic. I don't know how fast this is. 3) [MySQL] Use a standard replication, distribute read only queries on both nodes and read/write queries to the master. This sounds like a good option, but again, I'm not sure on speed. I also don't know what would happen if the master server went down. If you have any other suggestions, please post them :)

  Read the article

• Ubuntu server 10.04 disconnects after short periods of inactivity on my site

  - by Melot

  Hi! I'm new to Ubuntu (installed it for the first time just a couple of days ago on my server). I've Ubuntu Server 10.04 and am just using the terminal, no GUI like Gnome. So far it's working pretty great except for one big thing. Whenever I go to sleep and there's no activity on my server (it's not a big site so active users drop to 0 during the night), the server kind of disconnects. The only thing that can bring the site back online is to restart the whole server. I've tried disabling powersaving by using setterm but that changes nothing. Even if I wake up the server by pressing any key or so the site wont go back online! I've tried just restarting both Apache and MySQL (I'm using LAMP-server btw) but not even that works. But as soon as I turn the power off and on at the server, everythings work like normal for a couple of minutes of inactivity (~5-15 minutes I'd guess) and then it's down again unless someone logs in to the site and is active. I was previously using XAMPP on my laptop with Windows XP and that worked 24/7 so I don't think it's anything with my router or ISP. This is driving me crazy! My site is down all the time I'm in school as I have no possibility to restart the server if it becomes offline. Does anyone have a clue to what could be wrong?

  Read the article

• How to find Stolen MacBook with iCloud

  - by user1518089

  My MacBook Air was stolen about 6 weeks ago. Through iCloud and "Find Phone", I have some pictures and a location down to about 2 blocks. The pictures are from the current user taking photos which automatically appear on my local devices. (Yes they probably saw my pictures until I stopped taking them. Yes, they are stupid.) I was thinking about going there and hanging out until I recognized the current users, but it is in a very bad neighborhood and I would be noticed. The police have not done anything. Yes, the MacBook can be locked or a message sent. I am hoping to get it back. Does anyone have ideas on how to track them down? While Find Phone shows their location, it does not report an ip address. Is there a way to get an ip address? Does Facebook face recognition work on strangers? Come on tech geniuses, help me play detective. It does not have Drop Box installed.

  Read the article

• Creating MS Word 2010 Relative Links?

  - by leeand00

  Okay here is what I've tried so far for creating relative links in my MS Word Documents. In my document from the ribbon I select the File tab. I then select Info from the side bar. Click the properties drop down from the right hand column. (a bit difficult to find initially, since it looks like text not a drop down, but it's there). Click Advanced Properties The <document-name>.docx Properties Dialog Appears I enter .\ to specify that I want a relative path for the links in my document. I click OK. I go back into my document select some text and attempt to make a link out of it clicking the Insert tab of the ribbon, and then clicking Hyperlink. I then select a document from the current folder, and strip the full path from it, leaving just the name of the .docx file to which I wish to link. Then I click OK. The link appears, I try to click it using Ctrl+Click. I am informed that the address of the site is not valid. Check the address and try again. What could I possibly be doing wrong here? I just want a relative link. It's so easy in to do this in HTML.

  Read the article

• IIS Web Farm Framework servers are automatically set to "unavailable" even when they are healthy... And they never return to the available state!

  - by JohannesH

  I have 2 web farm configurations, one with 2 member servers and one with 3 member servers. I have health monitoring set up on both farms and the monitoring tool reports all servers as being healthy. However after a while all the servers are marked as being "Unavailable" and "Healthy" in the "Monitoring and Management" screen (in the "Servers" screen they are all listed with "Yes" in the "Ready for Load Balancing" column). Viewing the event log on both the web farm controller or any of farm servers doesn't reveal anything interesting. there are no warnings or errors in the period where the servers became unavailable. There are a couple of informational events about the worker process getting shut down due to inactivity but I don't hope this is the cause since that would mean that the farms will die during the night when the load is low. Am I missing something? EDIT: Btw, I think its very odd that the application pool shuts down on the servers since the health monitoring system is polling an aspx page on each server. Shouldn't that keep them going? EDIT2: Now I've also experienced this problem with the RTW version of Web Farm Framework 2.

  Read the article

• Toshiba Satellite C665 Rebooting from Standby

  - by Coodu

  I currently am working on a C665 with a strange issue. When the panel is closed the notebook will put itself to sleep in the usual way, and the power LED changes to the pulse to indicate that the device is asleep. However, when the panel is opened to resume using the notebook, the system will restart itself, instead beginning from the Toshiba logo and proceed to boot back in to W7. I should also note that each time this occurs, the "Windows Startup Recovery" option occurs, indicating that the system was not shut down correctly. Some things I have tried: Updated to latest Toshiba BIOS. Returned BIOS settings to their defaults. Swapped Memory to known good module, tested KGM in both memory slots within system. Confirmed that power settings are set to sleep/wake when power button is pressed. Ran a quick HDD fitness test using a parted magic USB stick. Checked for BSOD logs using BlueScreenView, none found. Ran src, no violations found. Any ideas? I have a good feeling the system is restarting itself, but in the event viewer there is a "Kernel Power" error, but it simply says "The system was not shut down correctly." Perhaps a bad driver? I'm not sure. Any advice would be great.

  Read the article

• Screen recording in Windows 8 makes PC unusable?

  - by Skadier

  OS used: Windows 8 Pro x64 Hi there, I got a weird problem. I tried to record my screen using different screen recording applications like Camtasia7, Hypercam, and some others. So if I hit "record" everything works fine for about 3-4 seconds. Then the PC slows down heavily caused by extremly high IO usage. The PC gets nearly unusable and laggs like hell. I can't switch applications, can't get TaskManager with Ctrl+Alt+Del, or something else without waiting 1-3 Minutes. After about 5-8 Minutes and a bit of luck I am sometimes able to end the process of the recorder and IO calms down very slow(100% IO lasts for about 2 Minutes before becoming normal). I don't know why this happens. Screen recorders that support Windows 8 aren't out afaik but at least Camtasia7 worked with Windows 8 Developer Preview and Windows 8 Release Preview (only had to change record method to .avi). No slow downs or something else. Is there anyone out there who knows this problem too? Is there maybe a solution to this problem?

  Read the article

• Win7 taskbar freezes on startup for about 1-2 mins

  - by Mike

  Running Win7 64-bit for about 4 months now. Never had this problem, didn't install anything new recently. When I boot up I can't do anything in the taskbar, it's frozen for about 1-2 minutes then everything is normal. I can right click on my desktop and move my mouse around. This randomly just started happening a couple days ago after a reboot. I have a 3.2ghz quad, SSD, 4 gig ram, etc. and it usually starts up quickly. After some troubleshooting (including running antivirus and Anti-Malware), it doesn't appear to be software related, but appears to be services related. I can boot up in safe mode and safe mode with networking just fine. I can also boot up normally with all my regular software loading at startup, BUT with all my services turned off. Now the odd part. When I run msconfig to disable all the services at startup and go through ticking them on 5-10 at a time or so and booting up it seems to be somewhat random. Ticking everything on from "Application Experience" halfway down to about "Quality Windows Audio Video Experience" and I can boot without the 1-2 min. freeze. Then I start ticking the stuff below that from a couple of Remote Accesses to Smart Card and Task Scheduler, etc. But the weird part is sometimes it will freeze sometimes it won't. I can't narrow it down. Then if it freezes, I'll boot up in safe mode and turn the ones I just turned on back off and I'll reboot normally but it will freeze again. Which makes no sense because that configuration just worked without freezing just before. I got frustrated enough that I backed up and wiped my hard drive (formatted and everything) and reinstalled Win7 but when I booted up, the freeze happened again. Any ideas? Thanks in advance.

  Read the article

• USB Diskdrive cannot be formatted nor accessed

  - by Dmolish

  So I have just recently bought and 8GB USB stick(Kingston DT 100 G2) on which I had installed Linux. However I needed to reinstall said Linux so I formatted the stick to "default" settings which includes FAT32 filesystem. Later when the install process kept getting errors, I got advice that the problem might be with the FAT filesystem. I decided to try and format the stick to NTSF (format G:/fs:ntsf) but the formatting failed and the drive broke down. And with breaking down I mean you cannot access the drive anymore and when you plug it in Windows asks if I want to format the drive but despite my will the format always fails. To fix this I tried changing it back to FAT32 (format G:/fs:fat32), but i get "Error in IOCTL-call". Second thing I tried was trying to reset the filesystem with some 3rd party application like HP USB Disk Storage Format Tool. But the programs didn´t regocnize any media on the drive. So now I´m in the situation that I haven´t got any idea on what to do next. Is the drive recoverable or did I just create a piece of waste metal.

  Read the article

• Some Portions of Computer Running Slow (Specifically Graphics)

  - by Mike Gates

  I noticed that a few things are running slow today on my Windows 7 laptop. Specifically, they are: Opening and closing windows takes several seconds for the animation to complete. Windows media player opens fine, but the movies are very laggy MMORPG's, such as RuneScape, are extremely laggy When waking my computer from sleep mode, after entering my password, my desktop takes about 3 seconds to fade in Other than those, everything runs at a normal speed. Things I've done that maybe contributed to this problem: Changed the graphics processor (by plugging in/unplugging the charger) [however, no matter how I change the graphics, I'm still getting this lagginess] Installed AdBlock, a Firefox addon [I recently removed it, and I'm still experiencing this problem] Went into Advanced System Settings, Clicked Settings, and unchecked a few visual things (such as the animation for opening and closing windows) [sure, this got rid of the opening/closing windows lag, but I like that little animation - plus that leaves all the other lag problems I'm experiencing] So, does anyone have any ideas/fixes? If so, please respond. Thank you. Some Other Information: I'm on a HP Pavillion dv7 laptop, 4285 Entertainment PC, with: intel CORE i5 inside, ATI Mobility Radeon Premium Graphics, Microsoft DirectX11 Opening and closing of windows: Defined as opening a program (i.e. Firefox) or closing it by hitting the X in the upper-right hand corner. Lately, the animation for opening and closing windows (which is simply either growing from the icon from the taskbar to fill the screen, or shrinking from the screen down towards the icon on the toolbar.) This problem also occurs for minimizing/maximizing windows. Very laggy movies: defined as .avi movie files saved to My Documents which skips several frames per second and seemingly slows down the movie as a whole Extremely laggy games: I tried RuneScape today, and movement in the game was at least 10x slower than it ever has been, even when playing on the lowest detail/graphics Desktop taking 3 seconds to fade in after sleep: in this scenario, I had no other programs running visibly. The computer generally fades to black from the password screen to the desktop in about 1 second, normally. However, it is now taking 3 or more seconds.

  Read the article

• computer randomly restarting. both in game and out of game

  - by eric

  first my specs are. AMD Phenom II x4 955 processor 3.2ghz 20gb ddr3 ram 4Gb Nvidia Geforce GTX 770 850w Corsair tx850w psu Gigabyte ud3 mobo Windows 7 professional I recently uprgraded my vid card to gtx770 and upgraded my psu to the 850w thats in it now. i did a reformat with the installation of the new gpu and psu and started fresh and only have a couple programs installed (diablo3, nvidia control panel, wow, and steam). all drivers are up to date and everything is hooked up correctly. the problem is it will randomly shut down. no blue screen. just turns itself straight off and reboots after a couple seconds. occasionally i will have to unplug the power cable from the psu for a few minutes then reconnect and it will start up. it seems pretty random. sometimes it does it when my pc is just sitting there on the home screen. and sometimes it does it during games. and sometimes it doesnt do it for days at a time. i noticed the psu felt hot so i put an extra fan blowing straight onto both the psu and gpu and neither feel overly hot after it shuts down now. could it just be that it is a psu problem. the psu was taken from another machine but wasnt having this problem in that machine. i have seen a few articles online about gtx770 doing the same thing. but i havent found any answers or solutions. any help will be appreciated. im sure the 850w is enough to power my machine, im just stumped and ran out of ideas to fix it. i have even returned the video card for another thinking it might have been an issue with that particular card, but still gettin the same problem.

  Read the article

< Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234  | Next Page >