Search Results

Search found 10798 results on 432 pages for 'port scanning'.

Page 227/432 | < Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234  | Next Page >

• How do I change my resolution to 1600*900 for a wide screen monitor?

  - by Madhu

  How do I change my resolution to 1600*900 for a wide screen monitor in Oneiric? My Hardware configuration is as below: madhu@madhu-Home:~$ lspci 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge) 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01) 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter (rev 02) 00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03) 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller 00:1f.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10) madhu@madhu-Home:~$ cat /etc/X11/xorg.conf

  Read the article

• Internal Mic Ubuntu 12.04 on Compaq Presario CQ50

  - by Genius FDE

  I have problem with the internal microphone not working on Ubuntu 12.04. It looks like a common problem on most of the laptops running ubuntu 12.04. I tried a lot of possible solutions available online but nothing seems to work! sudo aplay -l gives: **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 By the way, the Laptop has no HDMI port! I've seen the same problem with Sony laptop but the mic was working with too much static noise. Thank you.

  Read the article

• A specific user is unable to log in to vsftpd

  - by HackToHell

  I am setting up a new user let his name be ftpguy. He has access to only one directory /var/www/xxx. I have already chowned the directory so that he has write and read privileges. The user is also unable to login via ssh as I have disabled that by changing his shell to /sbin/nologin. Also, in vsftpd config, I have enabled the chroot_local_user. Now whenever I log in from ftp, i get an auth error. Connect socket #1008 to xxxxxxxx, port 21... 220 Welcome to blah FTP service. USER ftpguy 331 Please specify the password. PASS **** 530 Login incorrect. I changed the password to something different several times, using the passwd command, nothing happens, i still the above error. However I am able to log in with my ssh creditals to my ftp server without any problems.(I do not use a key).

  Read the article

• How to share internet connection and making the client accessible over the lan

  - by Dario Silva Moran

  I've a Pc with Ubuntu 14.04 connected to a linkys router through wlan0, and I'd like to share internet connection to an AVR with ethernet port. This is pretty simple if only internet connection is required for the AVR: actually, creating an ethernet connection as "Shared with other computers" and setting up the AVR IP configuration to use DHCP works just fine, but that makes a private class A lan between those two; of course ip addresses are not in the range of the LAN the router is managing. So, I tried with static ip on both sides (Ubuntu eth0 and AVR ip). Tried many combinations, none of them work to provide Internet access to the AVR and at the same time make the AVR accessible over the network through his static ip address (say, 192.168.0.110). Any tips around to share??

  Read the article

• How to learn programming for a medium scale project form a beginner? [closed]

  - by Lin Xiangyu

  I study programming by myself.I have learn servel programming languages. but I never write a project more than 1000 lines. I know the best way to improve programming skills is practise. The problem is many books, just talk about the programming language, or talk about build a project from a high level. Fews of books will teach how to build a middle scale project. For example, I want to build a simple HTTP Server(Nor like Apache or just a simple listenr to a port), a Markdown Parser, or a download tools just like emule or wget. I don't know what to do. I may found peaces of code in the web, or found familiar project in the Github. I don't know how to read the code. I want to some tutorial that can told me how to build the project step by step, teacher me how to write thousands lines of code. Any suggest?

  Read the article

• How to config multiple monitor with optimus?

  - by irrational

  I have an Acer Aspire 8951G running 12.04 Pangolin with bumblebee working beautifully. My problem is that when I connect either the VGA port or the HDMI to my projector there is no way I can see to properly set up the resolutions or colours. The default basic display driver sees the projector correctly, but messes up colours and resolutions (on hdmi) and resolutions on VGA. (Its a 1280 X 720 projector) Am I missing some sort of Xorg configuration? nvidia-xconfig does not seem to exist and running optirun nvidia-settings -c :8 opens the settings, but of course only for the one display. I just want a way to set a default config for my projector via VGA or preferably HDMI. Any help would be wonderful.

  Read the article

• Ubunti 12.10 wake on lan not working with Realtek 8139

  - by f.cipriani

  My pc doesn't wake up when receiving a magic packet from a pc connected to the same router. ethtool: fcipriani@ubuntu:~$ sudo ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: No Link partner advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 32 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes I have enabled all the wake up features in my bios, and I have verified the magic packet gets to the pc. I suspect the main problem is that the NIC light is completely turned off after the shutdown, but even after spending a lot of time researching I can't understand if this is a limit of my network card, my mobo, or something in the OS which needs to be configured correctly in order to leave the NIC in stand by mode with the light flashing. the NIC is Realtek 8139, the motherboard Asus P5L13L-X

  Read the article

• How to use MythBuntu to send TV signal to a 2nd frontend

  - by Mark Preston

  I guess the a MythTV or MythBuntu backend acts as a "server" for the frontends. I have MythBuntu installed. It runs fine, I can tune live TV, hear the sound, etc. To get this to work, I had to config the Wired Network IP4V settings to Method: Link-Local Only. The Local Backend IP address is: 127.0.0.1 and the info (bottom of screen) says that if there is another frontend, that this IP add. must be changed. 1 - Does this mean changed to the IP address of the 2nd frontend? 2 - What "Method" do I use to make 2 or more frontends? 3 - I have an ethernet switch which currently "sees" the tv signal, sends it to the computer's ethernet port where Mythbuntu makes use of it. 4 - How do I set up the Myth to send it's output (the tv shows) to both televisions? If you know of a How-To, or website, please give the URL or identifying keywords.

  Read the article

• How to connect Nexus 7 with Ubuntu

  - by gotqn

  I want to move some files from my PC to Nexus 7. The tablet is connected to my PC's USB port and it is successfully charging. Unfortunately, the PC is not detecting the devices - what I expected is to be shown the Nexus 7 tablet as external devices (like my USB flash memory). As the tablet is connected to the my home internet network, I have checked if it will appear in the "Networks" section but it does not. I am using Ubuntu 12.4 LTS. Is there a easy way to connect the devices to my PC and move some information between them?

  Read the article

• apache permissions problem

  - by nishan

  Im running ubuntu 12.04 lts 2gb ram 500gb hdd. My hdd have 4 partitions. Partition 1 = 40 gb Windows (NTFS, lable = win32) Partition 2 = 320 gb Windows (FAT label = common) Partition 3 = 40 gb Ubuntu (EXT4) I installed apached2 now to change its default www directory, I used 'gksu gedit /etc/apache2/sites-enabled/000-default' and chaged to /media/common/www After all I run in terminal chmod 777 /media/common/www chmod 777 /media/common/www/. After that I type in firefox 127.0.0.1/index.php It says "Forbidden You don't have permission to access / on this server. Apache/2.2.22 (Ubuntu) Server at 127.0.0.1 Port 80" Before my changes it was working fine. How should i run my websites???

  Read the article

• Is paying programmers to "test" for bugs normal? [on hold]

  - by user106277

  I recently hired a programming team to do a port of my iPad app to the iPhone and Android platforms. I also wanted them to implement a bunch of tips on how to play the app, similar like you would find in Candy Crush or Cut the Rope. They want to charge 12 hours @ $35/hr for the "Testing all of the Tips", telling me that normally it would take them more than 25 hours but that they will 'bear the difference'. I have never heard of this, but maybe it's a new practice? I am used to devs doing their own quality control, and then having a testing/acceptance period... Am I missing something? Thanks for any help and advice you can give!

  Read the article

• How to use RDP protocol in Remote Desktop Viewer?

  - by drgrog

  I am using a Natty Live-USB, and the Remote Desktop Viewer application (Applications - Internet - Remote Desktop Viewer) only shows SSH & VNC protocols. How can I include RDP in the list, in order to connect to existing Windows Remote Desktop sessions on Windows XP machines. I am aware that I can use the gnome-rdp application, or even rdesktop hostname from a terminal, but I would like to create a persistent LiveUSB that uses Remote Desktop Viewer to connect to Windows RDP (port 3389). I do not want to set up VNC, TeamViewer or any others, as these do not solve my problem due to the fact they need additional software on the remote hosts.

  Read the article

• Mobile Internet Modem Olivetti Olicard 155 does not work in Ubuntu 12.10

  - by João Fracassi

  I have a problem, I bought a 3G mobile modem, but does not work in Ubuntu 12.10, also did not work on Ubuntu 12.04. I installed the USB Modeswitch and has the same flaw, does not recognize the modem within the connection manager, I connect the modem to the USB port and wait up to 20 minutes and does not recognize the modem. I ran the command recognizes the modem and lsusb as "Bus 001 Device 007: ID 0b3c: C004 Olivetti TechCenter." Does anyone have this modem, you can help me solve the problem, or does anyone have a solution? Because the manufacturer does not support Linux and according to some forums usbmodeswitch supports esste model. Olivetti Olicard modem 155.

  Read the article

• Screen is very dim on an Acer Aspire 6920Z

  - by Justin

  I've been trying to figure this out for a week now, my laptops screen is on and working but you cannot see whats on the screen without shining a flashlight at it. I'm using a spare monitor by the VGA port right now to be able to use this laptop, which is kinda a pain. Been reading around a bit about this problem and it seems to be a common-ish problem it seems. I've tried to change the brightness which doesn't help whats so ever. It just happen one day after I turned off the laptop for the night. The screen flashes on for a bit at start up, then goes completely dim. Anyone with this problem and find a fix? You can search up this computers spec by the name/model in the title if you need hardware info. I never had this problem with the old Ubuntu 10.04.

  Read the article

• Micromax 3G mobile internet modem not being detected

  - by arjith

  I have Micromax 3G modem, and i inserted it in the USB port, but it is not being detected by Ubuntu 12.04, that i'm using from a Live USB. I tried creating a mobile internet connection, however, eventhough i created it, there is no option to connect. I had previously used 11.10 Ubuntu, and it had automatically detected the datastick modem and asked me to create a connection. On typing lsusb in the terminal it gives the following: **Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 03f0:5307 Hewlett-Packard Bus 001 Device 008: ID 1c9e:9605 OMEGA TECHNOLOGY Bus 001 Device 006: ID 5986:0364 Acer, Inc tried to insert the modem before boot, with negative results **

  Read the article

• Ubuntu and VirtualBox

  - by Sinan

  I have the following configuration, A host running Windows 7; A guest running Ubuntu 14.04 LTS (VirtualBox); I am connecting a Cisco router directly to my PC running Windows 7 and testing the router for netflow packets in the virtualBox I am having a difficulty capturing the traffic of the netflow from the Cisco device in my virtualBox using port 2222. I tried to use the many different networking modes provided by virutalBox (i.e. NAT, Bridged Adapter, Host only adapter) but I am not successful in capturing the netflow traffic. Could you please advise me on the configuration setup that need to be done on the virtual box to allow capturing the traffic coming from the router. I successfully capture the netflow traffic on my PC (windows 7). Thank you

  Read the article

• is the AOC e2239fwt supported for multi touch on any ubuntu distro?

  - by HybriDPjT

  as the title says i have the e2239fwt monitor and ive tried ubuntu 10.04, 10.10, 11.04, 12.04 and now 13.04 and i cant get it to work. i should state that the single point touch seems to work ok but thats all. ive already tried looking and found no answers so here i am asking the peeps in the know :) i am currently running 13.04 and possibly going back to 10.04 if i cant get it to work or find that this monitor is in fact not supported.. hybridpjt@Unicorn:~$ lsusb Bus 002 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 003 Device 002: ID 045e:0780 Microsoft Corp. Bus 003 Device 003: ID 06a3:0cc3 Saitek PLC Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 0408:3001 Quanta Computer, Inc. Optical Touch Screen

  Read the article

• How to open files which are located in VirtualBox's Guest Machine from Netbeans of Host Machine

  - by Bakhtiyor

  I have Ubuntu 10.04 installed in my Host Machine and it has VirtualBox. I have Guest Machine wich runs Ubuntu 10.10. I have NetBeans installed in Host Machine and need to open my project files which are located in Guest Machine. The reason I need it is because in my working place I have not access to install any applications, that is why I have Guest Machine where I have Web Server installed on it and also I have one web application that I am developing. I need to open that web application files from Guest Machine's Netbeans in order to modify/create new files for my web application. I have configured SSH server of Guest Machine and added port redirection in the VirtualBox so that now I can connect to it from Host Machine. But I could not find any way to open those files from Netbeans. Could anybody give me advice about how can I do that please? UPDATE I forgot to say that I don't want to use SharedFolders.

  Read the article

• 127.0.0.1:9051 doesnt work after apache, mysql, php installation?

  - by Rana Muhammad Waqas

  I have installed apache2, mysql, and php and now it doesnt let Vidalia run on localhost. i tried to change the TCP connection (controlport) to any other ip 192.168.0.40 and tried to change the default port 9051 to any other but that doesnt work. I thought apache is running so i used this command sudo service apache2 stop but that still doesnt work. So now when i type 127.0.0.1:9051 in browser it says and if i type only type 127.0.0.1 after stopping the apapche2 service with the command mentioned above it says unable to connect I am not sure what to do now Help!

  Read the article

• Which programming language to develop software for USC that also runs on other OS?? (WINDOWS/OSX)

  - by Marian Lux

  I have skills in JAVA and C#: First i had a closer look to JAVA (Eclipse with Windowbuilder-Plugin) - Swing: But there is no natvie GUI-Support for GTK3 (e.g., HUD seems not to work) Then i was at JAVA - SWT: It is to heavy. I want do code a small app that improves the Ubuntu desktop. I don't want to ship a program with eclipse included. After that i found C# Mono (Monodevelop): GTK-shparp is only for GTK2 available. A GTK3-port will come soon but is it possible to convert the program from GTK2 to GTK3 without extra adaptations? The next bad thing is, that MONO is now dropped from Ubuntu LTS 12.04. So i have no chance that my app would be a default-app in an Ubuntu-Image. (This is also a factor for me to choose a programming language). I know there are other techs but i want to use as programing language JAVA or C#.

  Read the article

• set proxy for vpn server on ubuntu server 12.4

  - by Morteza Soltanabadiyan

  I have a vpn server with HTTPS, L2TP , OPENVPN , PPTP. i want to set proxy in the server so all connection that comes from vpn clients use the proxy that i set in my server. I made a bash script file for it , but proxy not working. gsettings set org.gnome.system.proxy mode 'manual' gsettings set org.gnome.system.proxy.http enabled true gsettings set org.gnome.system.proxy.http host 'cproxy.anadolu.edu.tr' gsettings set org.gnome.system.proxy.http port 8080 gsettings set org.gnome.system.proxy.http authentication-user 'admin' gsettings set org.gnome.system.proxy.http authentication-password 'admin' gsettings set org.gnome.system.proxy use-same-proxy true export http_proxy=http://admin:[email protected]:8080 export https_proxy=http://admin:[email protected]:8080 export HTTP_PROXY=http://admin:[email protected]:8080 export HTTPS_PROXY=http://admin:[email protected]:8080 Now , I don't know what to do to make a global proxy for server and all vpn clients use it automatically.

  Read the article

• Using C++11 for cross-platform Game Engine Development

  - by Samaursa

  Note: This is not a 'give your opinion' question about C++03 and C++11. Our game engine, written in C++03, is designed to be compiled on Windows, OSX and iOS. Linux support is planned for the (very) near future. Our experience is limited when it comes to consoles, which is why I am asking this question. Currently, we are debating whether switching to C++11 and using non-compatible features of the C++11 standard could pose a problem in the near future when we need to port our engine to any of the current gen consoles (perhaps the compilers supported by some console(s) do not support C++11 yet? We don't know...). So, game developers who have experience across multiple platforms and consoles, do you think we should stick to C++03 until the new generation of consoles arrive and most everybody has switched to C++11 standard (have they already?). Or are most consoles using/support compilers (VC++, GCC or variants?) that are already supporting C++11 features?

  Read the article

• How to Access Your Router If You Forget the Password

  - by Chris Hoffman

  Routers protect their web interfaces, where you can configure their networking, parental control, and port forwarding settings, with a username and password. These default passwords can be changed to protect the router’s settings. If you’ve forgotten a router’s password – or if you acquired a used router and don’t know its password – there’s a way to reset the password. You may also be able to forward ports without knowing the password. Image Credit: tnarik on Flickr How to Access Your Router If You Forget the Password Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor

  Read the article

• Mouse takes a while to start working after boot

  - by warkior

  I just recently installed Ubuntu 12.04 (64 bit) and a number of my USB devices have stopped working. At least, they don't work for the first 3-5 minutes. I have two mice (one wireless, one wired) and a camera, which seem to take Ubuntu 3-5 minutes to recognize after booting up. Eventually, they do start to work, but it takes ages! lsusb results: (when the mice are working...) $ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c512 Logitech, Inc. LX-700 Cordless Desktop Receiver Bus 003 Device 003: ID 03f0:3f11 Hewlett-Packard PSC-1315/PSC-1317 Bus 006 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 006 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver syslog entries for what seems (to my very untrained eye) to be the problem: Oct 12 20:12:51 REMOVED-GA-MA785GM-US2H kernel: [ 17.420117] usb 2-3: device descriptor read/64, error -110 Oct 12 20:12:57 REMOVED-GA-MA785GM-US2H goa[1879]: goa-daemon version 3.4.0 starting [main.c:112, main()] Oct 12 20:13:06 REMOVED-GA-MA785GM-US2H kernel: [ 32.636107] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:06 REMOVED-GA-MA785GM-US2H kernel: [ 32.852122] usb 2-3: new high-speed USB device number 3 using ehci_hcd Oct 12 20:13:21 REMOVED-GA-MA785GM-US2H kernel: [ 47.964131] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:37 REMOVED-GA-MA785GM-US2H kernel: [ 63.180115] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:37 REMOVED-GA-MA785GM-US2H kernel: [ 63.396126] usb 2-3: new high-speed USB device number 4 using ehci_hcd Oct 12 20:13:47 REMOVED-GA-MA785GM-US2H kernel: [ 73.804158] usb 2-3: device not accepting address 4, error -110 Oct 12 20:13:47 REMOVED-GA-MA785GM-US2H kernel: [ 73.916190] usb 2-3: new high-speed USB device number 5 using ehci_hcd Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.324160] usb 2-3: device not accepting address 5, error -110 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.324197] hub 2-0:1.0: unable to enumerate USB device on port 3 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: failed to claim interface Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: Failed to get parent Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: device devpath is /devices/pci0000:00/0000:00:12.0/usb3/3-3 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: MFG:hp MDL:psc 1310 series SERN:CN47CB60BJO2 serial:CN47CB60BJO2 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.768132] usb 5-3: new full-speed USB device number 2 using ohci_hcd Oct 12 20:14:01 REMOVED-GA-MA785GM-US2H udev-configure-printer: no corresponding CUPS device found Oct 12 20:14:13 REMOVED-GA-MA785GM-US2H kernel: [ 99.904185] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:29 REMOVED-GA-MA785GM-US2H kernel: [ 115.144188] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:29 REMOVED-GA-MA785GM-US2H kernel: [ 115.384178] usb 5-3: new full-speed USB device number 3 using ohci_hcd Oct 12 20:14:44 REMOVED-GA-MA785GM-US2H kernel: [ 130.520196] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:59 REMOVED-GA-MA785GM-US2H kernel: [ 145.760179] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:59 REMOVED-GA-MA785GM-US2H kernel: [ 146.000173] usb 5-3: new full-speed USB device number 4 using ohci_hcd Oct 12 20:15:10 REMOVED-GA-MA785GM-US2H kernel: [ 156.408168] usb 5-3: device not accepting address 4, error -110 Oct 12 20:15:10 REMOVED-GA-MA785GM-US2H kernel: [ 156.544188] usb 5-3: new full-speed USB device number 5 using ohci_hcd Oct 12 20:15:20 REMOVED-GA-MA785GM-US2H kernel: [ 166.952181] usb 5-3: device not accepting address 5, error -110 Oct 12 20:15:20 REMOVED-GA-MA785GM-US2H kernel: [ 166.952215] hub 5-0:1.0: unable to enumerate USB device on port 3 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.216164] usb 6-2: new low-speed USB device number 2 using ohci_hcd Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: checking bus 6, device 2: "/sys/devices/pci0000:00/0000:00:13.1/usb6/6-2" Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: bus: 6, device: 2 was not an MTP device Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.396138] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input16 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.396442] generic-usb 0003:046D:C00C.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:13.1-2/input0 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.660187] usb 6-3: new full-speed USB device number 3 using ohci_hcd Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: checking bus 6, device 3: "/sys/devices/pci0000:00/0000:00:13.1/usb6/6-3" Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: bus: 6, device: 3 was not an MTP device Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.859045] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3/input2 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.865086] input: Logitech Unifying Device. Wireless PID:400a as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.2/0003:046D:C52B.0006/input/input17 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.865291] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:13.1-3:1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2040: invalid product id string ret=-1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2045: invalid serial id string ret=-1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2050: invalid manufacturer string ret=-1

  Read the article

• EPM Architecture: Foundation

  - by Marc Schumacher

  This post is the first of a series that is going to describe the EPM System architecture per component. During the following weeks a couple of follow up posts will describe each component. If applicable, the component will have its standard port next to its name in brackets. EPM Foundation is Java based and consists of two web applications, Shared Services and Workspace. Both applications are accessed by browser through Oracle HTTP Server (OHS) or Internet Information Services (IIS). Communication to the backend database is done by JDBC. The file system to store Lifecycle Management (LCM) artifacts can be either local or remote (e.g. NFS, network share). For authentication purposes, the EPM Product Suite can connect to external directories or databases. Interaction with other EPM Suite components like product specific Lifecycle Management connectors or Reporting and Analysis Web happens through HTTP protocol. The next post will cover Reporting and Analysis.

  Read the article

< Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234  | Next Page >