Search Results

Search found 7706 results on 309 pages for 'checked'.

Page 228/309 | < Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >

• exim4 seem to stop listening

  - by trakos

  Hey, I have a strange problem with my exim4 configuration. I have a dedicated server running debian for quite a long time now, but I'm not really using it actively recently, so everything just worked due to lack of changes ;) However, recently, my exim4 smtp stopped answering on port 25. It does not respond through localhost, as well - even though it's set to listen on any interface available. Some things I've checked: ks:/home/trakos/Maildir/new# netstat -ap | grep exim tcp 0 0 *:smtp : LISTEN 12521/exim4 ks:/home/trakos/Maildir/new# exiwhat 12521 daemon: -q30s, listening for SMTP on port 25 (IPv4) ks:/home/trakos/Maildir/new# cat /var/log/exim4/rejectlog ks:/home/trakos/Maildir/new# cat /var/log/exim4/paniclog The queue is set for 30s only because I was running it in a non-daemon mode to see any output. Strangely enough, no suspicious output is given, netstat even shows it is listening on port 25, but still trying to telnet to it times out. The only things that may have changed recently are: I've got second IP for my server I remember that few days ago my spamassasin crashed, and I've started it up again So yeah, I'm really clueless about this one now :P I mean, I don't even know what could be failing here. Could someone give me some ideas what should I check next? PS: it has uptime of 442 days, so I haven't really tried rebooting it yet ^^

  Read the article

• XP - ping changes routing table?

  - by Corelgott

  Hey Folks, I have got a real strange behaviour with one of my XP-Sp3 machines. Setup: A Server in the lan (192.168.5.0) proviedes access to all roadwarriors in 10.8.0.0 The DCHP has a static route for all clients pronouncing 192.168.5.235 as gateway for 10.8.0.0 All Clients can ping & access the vpn-machines; everything works like a charm But one Xp-Sp3 is not willing to connect to them. It gets all the same routes as any other sytem in the lan and I trippel-checked - there are no static routes on this machine When I ping any 10.8.0.0 device from this machine, the first two packaged work like a charm; but the next two (and any package after them) fail and get lost. When I look back into the routing table: There is a new route; a special one just for the device I pinged, which points to the right gateway - but which wasn't there earlier... As Long as this route exists the machine can't ping anything on 10.8.0.0. But if I remove the route by hand: The next to ping packages work fine... Has anybody got an idea about that? Anybody every seen such a behaviour? Any hint / help / tip is greatly appreachiated! thx in advance Corelgott Ps: I attach an image of the cmd to clarify things - its in german, but reading a routing table shouldn't be that hard...

  Read the article

• 85 Hz on old/new driver looks the same like 75 Hz on previous one?

  - by jon

  I have old philips 107T5 CRT and Nvidia graphics card. I used old Nvidia driver (but it wasn't 'legacy' one when I installed it) for few years but recently I decided to install other Linux distribution. I used 75 Hz refresh rate and 1024x768 resolution on my previous distribution. After I installed the new distribution I had to install a Nvidia driver so I downloaded one from the Nvidia site (this time only legacy supported my card so I downloaded legacy and installed it). It wasn't automatically updating xorg.conf but I had my previous xorg.conf copy and I used it. When I run X I could only choose 85 and 75 Hz, 85 was checked as default. And now what shocks me: that default 85 Hz looks identically like 75 Hz on previous driver looked (at least to me). I tried 75 Hz out of curiosity and it's too bright, hurts, etc. But on the previous driver 75 Hz wasn't hurting my eyes. Why is it different? It's the same number after all, so it should always give the same results, right? That's my first question. Second question: Is 85 Hz OK for that monitor model? Would it break it? I tried to find the optimal refresh rate for this model but couldn't find it.

  Read the article

• Permission denied (publickey,gssapi-with-mic,password) ssh error

  - by zentenk

  Heads up I'm a noob with linux and networking. I set up a ubuntu server and I have a static ip for my network. When I try to connect to the server at home (external), it prompts me to log in. I supply the correct password (or incorrect pw), I get the error Permission denied, please try again. and after 3 times I get Permission denied (publickey,gssapi-with-mic,password) I am however able to connect with SSH from another computer in the same network with ssh < internal ip of server > I'm connecting with mac os x and my config file is vanilla. Note: During installation of ubuntu it says I don't have a default route or something while doing auto network configuration, but I ignored it and continued the installation, could this be the problem? EDIT: I have tried the below, I have nothing in hosts.allow and also iptables shows the ports that I have allowed, which is 22. I checked the auth.log, and there is nothing when I connect to it remotely (even when it says permission denied). I have tried connecting to it internally and the correct authentication logs show. Any idea whats wrong?

  Read the article

• computer fails to boot during/after POST for five or six boots, then works

  - by N13

  For the last few days, my computer has had issues booting. I've seen two different behaviors: The screen displays the graphics card information, then begins to list the RAM, hard drives, etc. At different points in this process (after the graphics info), the computer shuts off. After five or six attempts, it then boots normally. In roughly the same time frame, the computer freezes, and fails to boot. I think it boots successfully on the next attempt. I've also noticed that in some instances, the computer freezes on shutdown. It gets right to the point where it should shut off, but doesn't. I recently combined the best parts of two different machines into this one. I'm booting to GRUB, with Ubuntu 12.04, Linux Mint 11 and Windows Vista (unfortunately) as my OS options. It has an Enermax Modu82+ 525W power supply, and I've used an online calculator to determine that my load shouldn't exceed 400W. I even unplugged a hard drive, but that didn't help. I found the latest BIOS, patched it and checked the settings, but that didn't fix it. I'm fairly certain this issue didn't exist at first, but might have started when the power at my new apartment dropped for a second. The machine is plugged into a surge protector strip, but it's old and I've heard they lose effectiveness with age. Is a power dip as damaging as a spike? If something were damaged, why would it boot successfully after five or six attempts? It's almost like the BIOS or PSU need to be primed. The trouble with debugging is that there seems to be a "grace period" after shutdown where the issue doesn't present itself again. What should I try next?

  Read the article

• Size of modules within initrd

  - by LiKao

  I am currently trying to manually replace the kernel within ubuntu-core on an embedded device with a custom kernel. However when I try to update the initrd my initrd becomes much bigger. Here is what I did: Extract the initrd that was shipped with ubuntu Make a list of all modules within the old initrd get the same modules from the new module director at /lib/modules/new_kernel_version add these modules to the initrd and remove the old ones If I do this my initrd becomes quite bigger than the original one, so I checked the individual modules. I picked the btrfs.ko filesystem driver as an example. So by comparing these two modules I noticed the one I just picked into the initrd was much bigger, which caused the difference in size. -rw-r--r-- 1 root root 999K Nov 14 15:06 btrfs.ko For the btrfs.ko within the shipped initrd. -rw-r--r-- 1 root root 7.2M Nov 14 15:08 btrfs.ko For the new btrfs.ko. What is different between these two modules? Could this be caused by some faulty setting for the new kernel? When producing the kernel I copied /proc/config.gz and used make oldconfig to update it, so all optimisations should be the same for both kernels. Or is there something else which is being done to the modules before they are put into the initrd? Maybe is there even some better way to build a new initrd for the new kernel in ubuntu altogether. Update: I just also tested with an initrd which I created from scratch using the mkinitrfs command within ubuntu, and it has the same size difference that I found for the initrd I manually updated.

  Read the article

• Cannot write to directory after taking ownership

  - by jeff charles

  I had a directory on an internal hard-drive that was created in an old Windows 7 install. After re-installing my operating system, when I try to create a new directory inside that directory, I get an Access Denied message. This isn't a protected directory, just a random directory I created at the drive root (that drive was not the C drive in either install). I tried to take ownership by opening folder properties, going to the Security tab, clicking on Advanced, going to Owner tab, clicking on Edit, selecting my user account, checking Replace owner on subcontainers and objects, and clicking Apply. There were no error messages and I closed the dialogs. I rebooted, checked the owner on that folder and a couple subfolders and it appears to be set correctly. I am still getting an Access Denied message however when trying to create a directory in it. I've also tried using attrib -R . to remove any possible readonly attribute inside the directory in an admin command prompt but am still unable to create a directory using a non-admin prompt (it does work in an admin prompt). Is there anything I can do to get write access to that folder and it's subcontents in a non-elevated context without disabling UAC?

  Read the article

• How to get back the themes feature in Windows XP?

  - by Martín M.

  When I try to set a visual style in Windows XP (the standard Luna, for example), I get one of these two: "Access denied" error. It works, but when I restart the computer, I get the Classic look again, with no errors. Also, the "Windows and icons" dropdown is grayed out in the "Appearance". This is a list of things I have tried, with no results: Making sure "Use visual styles on windows" is checked on System Properties Advanced Performance. Restarting the "Themes" service. It starts cleanly, no errors. Applying these two fixes: Kelly's Corner and tweaks.com. Running sfc /scannow and checking the integrity of uxtheme.dll against a clean installation of XP Restoring the whole \Windows\Resources\Themes directory. Creating a new user. The new user does not seem to suffer this problem. Maybe this is the solution, create a new user and migrating all the data, but it would be a pain, and I would prefer reinstalling the whole thing. I am using Windows XP Professional SP3, with no spyware, no virus, and no other visible malfunctions. How can I fix this?

  Read the article

• Gmail: Received an email intended for another person. [closed]

  - by jonescb

  I'm not really sure how email routing works, but someone ordered something on Amazon and I received the email instead of them. Or maybe we both got it, I don't know. The order doesn't show up in my account, so I'm certain I wasn't charged for it, but I shouldn't be getting other peoples' emails. We'll say that my email is [email protected], and somebody who's email is [email protected] places an order on Amazon. The confirmation email is sent to me at [email protected]. I checked the email header, and it did say To: [email protected] which is not my email address. At first I thought that Google ignores periods in email addresses, but I tested the account setup and it doesn't give any error when you put a period in the address. I didn't create the account; I just used the "check availability" function and the address I chose with a period was fine. Maybe someone with knowledge about how Email works could tell me why this happened. Is this a bug in the way Amazon sends emails? Or is it a bug in how Google receives them? Who should I report this issue to?

  Read the article

• How can I confirm that burn process is completed successfully??

  - by infant programmer

  Just now I tried to make a duplicate copy of my Windows XP Pro SP3 CD. I had set 32X speed while the max speed allowed is 48X. And checked "Verify the Data after burning". I didn't observe how much % did it complete. But after 15 mins (which is sufficient period to burn disc), I heard "Fatal Error" sound. When I saw the monitor, There was a message box which was showing "Error while burning Disc", I saved the error log which you can find here click_me. How do I acknowledge that burning process is done?? Well. I my PC is able to read the cd and it is bootable too.. I am not sure .. whether the burning process got failed or the verify Process! Please let me know if you have come across or aware of such situation .. As it is XP installation CD .. I don't want to do trial and error method. regards,

  Read the article

• What to do about old MacBook

  - by John

  I have a White MacBook version 10.5.8. I accidentally dropped it and about an inch of the most right side of the screen is blacked out. I can't see the clock and Trash Can because of this. I checked how much it would cost to repair, and the cost of repairing is a flat rate of $300. I thought that was kind of expensive, like a third of the cost of the MacBook itself. accidentally dropping a notebook is something that would happen sooner or later, so I think getting a Lenovo is the best. I ended up getting a MacBook pro 15 inch, but do you think it's worth the money to fix my old MacBook? I even saw some used MacBooks available on Ebay for about $400. Anyways I don't know what to do with it. I do like its screen and keyboard better than the MacBook Pro ones, because the screen is less glare-y and the keyboard is more crisp and fun to type on, and its more wieldy when I'm using it while lying down.

  Read the article

• Recieving a 500 Internal Server error after login success?

  - by Jeremy Quick

  I created my first member login form which takes the typical username and password and then sends it to the code below: checklogin.php: mysql_connect($db_host, $db_username, $db_password) or die(mysql_error()); mysql_select_db($db_database) or die(mysql_error()); $username=$_POST['username']; $password=$_POST['password']; $username = stripslashes($username); $password = stripslashes($password); $username = mysql_real_escape_string($username); $password = mysql_real_escape_string($password); $sql="SELECT * FROM users WHERE username='$username' and password='$password'"; $result=mysql_query($sql); $count=mysql_num_rows($result); if($count == 1) //ERROR APPEARS TO TAKE PLACE HERE { session_start(); $_SESSION['username'] = $username; $_SESSION['password'] = $password; header('login_success.php'); } else { header("location:login_fail.php"); } If I type in the wrong information everything works properly so I know the error appears to be taking effect in the marked if statement. I have been searching the internet now looking for solutions but none seem to match mine or I am overlooking them. I've made a few changes which brought me to this point, before I was receiving deprecation warnings. Also, I have checked the logs and they are empty of errors relating to this.

  Read the article

• ssh hangs on "Last login" line

  - by Pavel H

  This happened for the first time three days ago - I ssh to the server, authenticate using a password, get the welcome message but it remains hanging on the "Last login:..." line. The command line doesn't show and the server doesn't react to my input. Other services on the server keep working ok (apache, tomcat, database, ..). The box has an out-of-band management using which I was able to restart it. After the restart the ssh worked ok again and I didn't find anything suspicious in the logs. Three days later the same problem occurs on this box again, and newly on yet another server in the cluster - 100% same symptoms. Both servers have about 2 month old installation of Debian Squeeze (6.0.2) and the problem never occurred before despite frequent ssh-ing, so it should not be a problem of settings. We haven't been installing anything new for quite some time now. I also made sure there is enough disk space on both servers. Since it started to happen all of a sudden on two servers at about the same time, I suspect some bug may have been introduced via Debian updates, yet I haven't been able to find anyone with the same problem. Most similar issues I have found: ssh freezes at the "Last Login Line" - in our case everything worked fine until recently, so nothing related to settings should be our problem. Diskspace checked, I couldn't check the memory but I would expect something would be in the logs if the system had been running out of it. Remote Fedora system unresponsive, odd but consistent behavior when trying to log in - problem with high load on the server; unlike in this case, nothing changes even if I wait for 10+ minutes

  Read the article

• Drowning in documents - recommend doc management solutions?

  - by Martin Day

  I've been researching document management lately. I want to organise my docs at home and also at the office. Finding affordable solutions one can actually test drive is quite hard. Some that I've downloaded just don't seem to work (testing on brand new Vista PC). I've seen some software on Amazon like Paperport but not really sure what they're like. For home I'd like something to organise files, full text search, good scanner integration, nice interface etc. But for the office it seems harder. I need something that does proper workflow and keeps versions. It will have an audit trail. Documents can be approved, checked in/out etc. I know a few clients who would like something similar. It would be great just to import thousands of documents from a shared drive and get them indexed with dupes killed. I'd like to be super clear about how/where the documents are being stored so that maintenance and backups are clear. My Google/twitter searches lead back to the same tired and vague webpages pushing what look like expensive and custom made solutions. Some might be very good I suppose but it's darn hard to tell. I don't mind a hosted package but all in all I don't think something like Google Docs, as good as it is now, will work. There are too many quirks and missing features (as compared to Office). Being able to work directly with the common Office file formats is important. I've noted a similar sounding question asked here back in August but it didn't seem to turn up too many solutions that I could easily and quickly apply. Also there could have been some changes since then so I feel it's worth asking.

  Read the article

• CentOS 5.8 - Can't login to tty1 as root after updates?

  - by slashp

  I've ran a yum update on my CentOS 5.8 box and now I am unable to log into the console as root. Basically what happens is I receive the login prompt, enter the correct username and password, and am immediately spit back to the login prompt. If I enter an incorrect password, I am told the password is incorrect, therefore I know that I am using the proper credentials. The only log I can seem to find of what's going on is /var/log/secure which simply contains: 15:33:41 centosbox login: pam_unix(login:session): session opened for user root by (uid=0) 15:33:41 centosbox login: ROOT LOGIN ON tty1 15:33:42 centosbox login: pam_unix(login:session): session closed for user root The shell is never spawned. I've checked my inittab which looks like so: 1:2345:respawn:/sbin/mingetty tty1 2:2345:respawn:/sbin/mingetty tty2 3:2345:respawn:/sbin/mingetty tty3 4:2345:respawn:/sbin/mingetty tty4 5:2345:respawn:/sbin/mingetty tty5 6:2345:respawn:/sbin/mingetty tty6 And my /etc/passwd which properly has bash listed for my root user: root:x:0:0:root:/root:/bin/bash As well as permissions on /tmp (1777) & /root (750). I've attempted re-installing bash, pam, and mingetty to no avail, and confirmed /bin/login exists. Any thoughts would be greatly appreciated. Thanks!! -slashp

  Read the article

• Certain websites redirect to 127.0.0.1. How do I fix this?

  - by Dian

  Facebook and Youtube in particular. Tried nslookup the address shows as 127.0.0.1. Checked the HOSTS file, it's fine. Ran Malwarebytes' Anti-Malware (didn't find any problems) and SpyBot Search and Destroy (found 1 problem). (Not sure if the Spybot made this improvement) now pinging youtube shows the correct address (74.125.71.91) but the browser still says: Connection to 127.0.0.1 Failed The system returned: (111) Connection refused Tried ipconfig /flushdns but there are no changes. Switched to another user but the results are the same. hosts file: # Copyright (c) 1993-2009 Microsoft Corp. # # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # # This file contains the mappings of IP addresses to host names. Each # entry should be kept on an individual line. The IP address should # be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one # space. # # Additionally, comments (such as these) may be inserted on individual # lines or following the machine name denoted by a '#' symbol. # # For example: # # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client host # localhost name resolution is handled within DNS itself. # 127.0.0.1 localhost # ::1 localhost ipconfig all: Connection-specific DNS Suffix: DNS Servers: 10.1.1.30 208.67.220.220

  Read the article

• Wireless Access Point stopped working

  - by Alex Pritchard

  I have a simple LAN set up at home using a Linksys WRT54GSV4 as my primary router and an Encore ENHWI-2AN3 as an access point. I connect the Encore to the Linksys by running a cable from one of the Linksys LAN ports into the Encore WAN input. I originally configured this using the Encore setup wizard, setting the device up in AP Router Mode. It detected the input network and worked about as expected, creating a second network that used my primary network to connect to the internet. It worked fine for about 2 weeks, then abruptly cut out today. I checked to make sure the network was still live through the cable going into the Encore (provides internet when connected to a laptop directly) and that devices are still able to connect to the network being broadcast by the Encore. When I try to rerun the connection wizard on the Encore, I receive the message "No Services found in WAN port." The WAN Settings is no longer retrieving a dynamic ip from the line. I tried providing a static IP, assigning an IP address within the subnet range of my primary router that wasn't being used and pointing the Default Gateway to the Linksys IP, but this did not work either. When I plug the cable into the WAN port, an internet light comes on that is not lit when a live network is not connected. I've tried doing a hard reset on the Encore (held down the rest button until the lights flashed, reconfigured from scratch), but the WAN settings are still not detected. Also tried powering off and on the modem, linksys, and encore. Any suggestions would be appreciated!

  Read the article

• Acer Aspire Touchscreen Not Responding

  - by Jerry

  I have an Acer Aspire z3101 all-in-one Touch screen running Windows 7 Home Premium. I am unable to get the screen to respond to my touch. I have checked the system and all drivers are ok according to comp. Using the settings to setup the pen and touch and to calibrate does not work. My touch brings no response at all. I had reinstalled the applications - Windows Touch Pack and Acer Touch Portal which didn't help. Today I done a complete reinstall returning comp back to factory settings and still there is no response. At first I thought that perhaps a driver or file was missing but now doubt that due to the reinstall not helping. Have you any idea what could be causing this problem? I am now at the stage of pulling my hair out and haven't had too much help from Acer. I have had the computer for just over a year now and so it is no longer under guarantee and this has me very worried due to my being unemployed. Any help is much appreciated. Thank you.

  Read the article

• SRM 4 Test Fails with message for some VM : Error: A specified parameter was not correct.

  - by Setesh

  Here are my architecture : For the protected site 4 Host VSphere Enterprise Plus, each one with 2 HBAs FC connected to the switch fabric, connected to an EMC CX4-120 1 VCenter 1 SRM For the recovery site 2 Hosts Vsphere 4 1 Vcenter 1 SRM 1 CX-4-120 The CX4-120 is connected to the second CX4-120 with ISCSI and the MirrorView / Asynchronous. I synchronise for the time 6 Lun on a FC DAE, 2 on a S-ATA DAE I have allocated 30% of the amount synchronised LUN for the SNAPSHOT us, but I have allocated them only on my S-ATA II DAE. It does not make a problem, my snapshot are correctly active. All the installation is new (hardware and software), installed in January with the last files available in download. I have a strange problem, and it's random, sometimes when I run a test on my RP, some VMs have this error : Error: A specified parameter was not correct. I don't know where to look. Any help is appreciated... PS : I have checked on all the VMs, no Floppy disk or CD attached. PS2 : There is severals VMs with RDM and OCFS2 filesystems on it.

  Read the article

• How does one debug Windows network share authentication?

  - by ajs410

  I have machine0 with 32-bit Vista, logged in as a domain user, running a VMWare image of 32-bit Vista, logged in as a local user, with the VM set to bridge the network. From an administrator account (called admin) within the VM, I try to access the hidden C$ share on machine0 (i.e. start - run - "\\machine0\C$\"). I get no prompts for credentials. Worse, machine0 has an admin account (different password), and machine0\admin gets locked out when VM\admin tries to access the network share. I get a message several seconds later, which feels like a cached credential failure leading to the lockout. I have checked several places for cached credentials; net use, Stored Usernames and Passwords, mapped shares. I rebooted (both machine0 and VM) to make sure the session was clear of any cached credentials. I can force net use to use my domain credentials when accessing machine0, and then I can see the share. I can also see shares that do not require credentials. I decided to try another machine on the network (machine1), 64-bit Vista, local user. This machine has no lockout policy, and after several seconds (feels like failed cached credentials again) it prompts me for credentials. After I enter them, it re-prompts me, saying "logon unsuccessful" (tried my domain credentials, and also machine1\admin's). Which is bogus, because I proceed to log on with remote desktop using the machine1\admin credentials. I have tried this on another machine (machine2, 64-bit Vista), running a copy of the same 32-bit VM, and I don't remember having this problem. machine0 has a fingerprint reader...could that try storing passwords and interfere? Are there any places I'm missing where there could be cached credentials? Is there a way to see what credentials are flying around when I try to connect?

  Read the article

• Suspected Corrupted Windows 7 MBR?

  - by AridDecay

  So, this may not be the correct place to put up my question, but i'll give it a shot. I'm having an issue repairing this computer. It was brought to me with the described issue of 'Not turning on' Later, I found that it would come with the error of 'No boot sector found on internal hard drive.' I assumed it was an MBR issue due to a virus or cutting a Windows update short. I booted into my trusty recovery enviroment and ran bootrec.exe /FIXMBR and restarted -- No luck I started to think (After multiple attempts to get the MBR sorted out, including creating a new boot sector) that the Hard-drive was possibly starting to cave in on itself, so I booted into a linux bootable CD and went to check the SMART data. Odd, say's it's inaccessible. That seems odd to me, considering it's a newer (two years old or so) Windows 7 computer. All new Hard-drives have SMART. So, I checked the BIOS. No mention of SMART anywhere. Greaaaat. I decided as a last-ditch effort to switch the hard-drive type to ATA in the BIOS (God knows why, I was getting frusterated) instead of AHCI. VOILA! It actually attempts to boot, gets halfway through the little windows animation, does an incredibly (Half a second) quick BSOD, and shuts down. Does anyone have ideas on what's going on here? I'm at my wits end.

  Read the article

• USB-to-Serial showing gibberish at 115200 Baud

  - by Mose

  I've got a serious problem which drives me crazy because I tried everything I could think of. First of all, I made a video: http://youtu.be/boghkuq7L_s but please read the following text for more information, not only view the video! When using a USB-to-Serial interface everything works as long as I don't go beyond 57600 Baud. At higher rates I only get giberish like this: év.­b0JNLYÆÿ¿iëd0U²(kßÞb! ú]/xscB!ï¯!BoXûÿ1ïâÖCÿ6ÌAnè*íÌC)º¿BíÞØ.C.@ÆÃwHJÂs "YE:ñ.èFðÌCÊ÷ÞÄ !x H w6@BtbHJ ̪ Ì6ì H¾a¿bH.">îvy®;f<ßBÌ p­L¨fæH­E ­þ¼MBÞI What makes the problem so strange is, I exchanged every component and the problem still presists. I tried differtent OSes (Ubuntu, WinXP, Win7, OSX 10.7) with 32 and 64 Bit. I tried USB-to-Serial interface from FTDI and Prolific. I tried reading the output from my Raspberry PI and from an Asterisk Appliance. I changed the cables and the wiring. Nothing helped. In the video I made a example with a old Notebook with native COM and put the USB-to-Serial to the same connection as "sniffer" (only Rx and GND connected) to make sure the output and everything is ok as one can see on the native port. The voltage is ok. Settings for both are 115200 Baud, 8 Bit with 1 Stop and no flow control. Native is ok. USB is messed up. I used the newest drivers and double checked all connections. I have no idea what is wrong here. As I couldn't find anyone describing problems like this I question my long experiance in computer science and think I'm doing some completly wrong... Please help :-/

  Read the article

• My new SSD is causing issues. How can I solve them?

  - by Allan

  Computer specs 1 TB harddisc 120 GB 520intel SSD 8 GB DDR3 RAM Athlon Phenom II x64 955 3. 2ghz DK DFI Lanparty FX7900 M3H3 motherboard ASUS ATI RADEON HD6970 2 GB I have bought a new SSD (Intel 520, 120 GB), and wanted to use this as my system disc. I removed the other harddisc, and installed the SSD with the newest firmware. And then Windows 7 I updated Windows 7 with no problems and then put back my old harddrive. I formatted that old harddrive just to clean up at the same time... So at this stage everything was perfect. My new SSD was set as Master 0 Primary it boots on it and I have 1 TB emptyu harddrive I can use for whatever I want. So far no errors at all Now here is the problem, I installed a few games and everytime I tried to play the computer would say Windows must restart because DCOM server process launcher service terminated, or it says Windows must now restart because the Plug and Play service terminated unexpectedly Most commonly this error is caused by a rootkit virus, well I have tried formatting my entire computer, and running every antivirus I could find, so that shouldn't be it. I've also read somewhere it might happen when there are hardware issues. That on the otherhand would make sense, as I just put in a new SSD. I don't expect you to know this error. I haven't found anyone who knew it yet. maybe you can me guide through what might have gone wrong when I placed in the SSD? What have I checked regarding the SSD? It displays the right name when the computer starts up It has the newest firmware Did a 'sfc /scannow' which told me everything was fine I don't know what to do from here. Everything seems to work great with the drive. when I start playing games my computer crashes.

  Read the article

• Firefox: Clear History Is SUPER EFFECTIVE?

  - by acidzombie24

  I'm seeing a performance problem on certain sites (like gmail) which clearing the history should not affect. Is this a website problem or a firefox problem and what can i do to fix it w/o clearing my history? Also as a webdeveloper i am interested in how to make this happen (or not happen). I'm using firefox 8 and i confirmed the problem by copying my profile to firefox 11 (portable). To reproduce go to gmail.com and sign in. Have your task manager open. Once you click signin or hit enter gmail will bring up your emails. Keep your eye on the CPU usage. I checked and right now on this machine its using all my CPU for 22seconds!!!! Yes. 22 seconds. Once i cleared my "browser & download history" Its <6seconds. WTF. I have no idea why or how the size of history and CPU usage when loading up gmail are correlated. I have firefox setup so it never clears the history. But... 22seconds is a disaster. Can someone explain why this is happening or a fix that isnt clearing my history? I tried visiting a few websites and only gmail eats up that much CPU. Most websites only take <5sec of max CPU. So maybe this is a gmail problem? Or a firefox problem that gmail happens to hit? I still dont understand why it happens. -edit- I forgot to mention places.sqlite is 90mb. I dont think that matters. I have a sqlite file 400mb which is pretty much 2 large tables. It has no performance issues

  Read the article

• IIS 6 Denies access to the default document

  - by Jim

  I've got Windows Server 2k3 with IIS6 hosting a couple ASP.NET MVC 2 applications (.NET 4), all in the Default Web Site. Most of them simply use Integrated authentication, but a couple use forms as well. All the applications work properly and are correctly accessible. The problem I'm trying to resolve is access to the default document. It is currently specified as index.htm. Both index.htm and the Default Web Site are configured to allow anonymous access (with none of the authenticated acces boxes checked). However, access is denied to the file. Accessing via server.domain.tld/ and server.domain.tld/index.htm both yield 401 errors. However, server.domain.tld/default.htm (file does not exist) properly returns a 404. If I alter the file security on index.htm to allow integrated authentication, then requesting /index.htm directly works properly for users with domain accounts, but anonymous users get a login prompt/401. How can I configure IIS to allow all users to view index.htm via server.domain.tld/?

  Read the article

< Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >