Search Results

Search found 9383 results on 376 pages for 'disk corruption'.

Page 228/376 | < Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >

  • Ubuntu 12.04 mdadm inactive

    - by user32274
    For a while now, my RAID 5 has ceased to work. Everytime I tried "madm --detail /dev/md127", its states all the drive and drive info, but that two of the drives have been removed. After some restarts, doing the same thing, i am getting /dev/md127 does not appear to be active. When I go into DiskUtil, I can see all 6 Hard Drives healthy and present, and i can see the Raid 5 at the bottom under Multi-disk Devices. However, the Raid says 0.0kb, and is not active. Please help and let me know how to proceed from here. I would really like to avoid rebuilding the RAID, especially because all 6 drives seem to be healthy and present. Thanks so much.

    Read the article

  • Maxtor OneTouch Hardisk Not Recognised

    - by user8960
    I have a Maxtor OneTouch External Harddisk 160gb that i purchased recently. At first my Ubuntu 10.10 could not mount it. I opened disk utility which recognized it but with no filesystem. I proceeded to try formatting it but this error popped up Blockquote Error creating partition table: helper exited with exit code 1: Error calling fsync(2) on /dev/sdb: Input/output error Blockquote I resorted to Gparted. Things turned worse; it wasn't even listed in the list of devices. Does anyone have a solution to this problem? Any help is appreciated.

    Read the article

  • I have installed Ubuntu 12.04, now my Windows Vista doesn't boot

    - by andraz
    I have a Windows Vista computer. And I've installed Ubuntu 12.04 on it. But now, when I boot my device it doesn't ask me which OS I want to choose, instead it just boots in Ubuntu. Please help me! I don't know what to do... :/ P.S.: I've created a partition with the Ubuntu installer. My hard disk drive is 250 gb (there around) and the partition is 30gb big... P.S.S.: It's very important because is my mom's computer and there are some very important files on it... :(

    Read the article

  • What makes Java so suitable for writing NoSQL Databases

    - by good_computer
    Looking at this page that aggregates the current NoSQL landscape, one can see that the majority of these projects are written in Java. Databases are complex systems software dealing with the file system, and so C/C++ would be a better choice than Java for this. (that's my thinking which might be flawed) Secondly, databases deal with transferring large amounts of data from disk to RAM -- which they call a working set. The JVM takes non-trivial amount of RAM for it's own purpose -- so it would be more efficient to use a platform that leaves lots of memory for data instead of hogging it for its own operations. The major relational databases are ALL written in C/C++ MySQL C, C++ Oracle Assembler, C, C++ SQL Server C++ PostgreSQL C SQLite C So what makes Java so popular in NoSQL world.

    Read the article

  • creating extended partition

    - by SidhuHarry
    this is my current hard disk status(Running linux Mint LIVE CD) i have- Ubuntu 12.04 on 206 GB partition at dev/sda1. dev/sda2 system reserved. Windows 7 on 90GB partition at dev/sda3 and linux swap in extended partition. what i want to do- I want to install Linux mint KDE on my system for that i want to create a new partition of 30GB(by shrinking the free space available at dev/sda1), i can't create that because i can create only 4 Primary partitions which are already there. so do i have to delete the Swap partition? and if i did how to force Mint KDE and Ubuntu 12.04 to use/share same swap space in new logical partition?

    Read the article

  • Having problem to login after upgrading from 11.10 to 12.04

    - by LinuxIsMyFriend
    I just update to 12.04 from 11.10 and I get to the login screen w/o problems. When I enter my password the screen turns black and returns to the login screen half a second later. There is a related question out there which was solved by creating more space on the disk but my disks (or rather partitions) are all below 30%. I can log in as guest. I can also login at the cmd prompt (going to tty with Alt+Ctrl+F1) with my normal user credentials. When logged in as guest I can also install programs using my normal account password. There is the normal authentication error when I mistype my password so I'm also sure the password works. Any suggestions?

    Read the article

  • Can't install ubuntu on msi computer

    - by Uruz36
    I have been trying to install ubuntu along windows but failed. the issue is that I get a graphical glitch with the colours of the ubuntu loading screen while installing from usb and no progress is made, the pc freezes. I've tryied the nomodeset solution, but when I have to reboot I get the same problem. I've tried ubuntu 13.10, 13.04, 12.04 etc...both generic and for amd: nothing worked... any idea how this could be resolved or which distribution/iso I should try for my system? thank you. I have the following system: AMD FX-4170 Quad-Core 4.20 Ghz ram 8 GB MSI mainboard 760GM-P21 (FX) 1TB hard disk samsung led tv as monitor (I connect with HDMI) OS windows 7 64bit ultimate

    Read the article

  • SSMS Slow To Save

    - by Bunch
    When using SSMS 2008 I found it to be really slow when trying to save a file, even a small one with just some simple SELECT statements on it. The symptoms were the flashing save disk icons in the lower right corner and selecting the location to save in the Save File dialog would hang each time I picked a location (e.g. Libraries, a folder). This was the first I had seen anything like this where it was really, really slow. It ended up that a server had died last week and I was still mapping a drive to it. SSMS was still trying to connect to it causing the slow down (further information here and here). Once I removed that the save functionality worked like it should. Tags: SQL

    Read the article

  • Opening programs very slow on ubuntu 12.10

    - by Mislav Blaževic
    When I open any program for first time after boot, it loads VERY slowly (Doesn't matter how long after boot). For example, terminal takes 2-3 seconds, skype and firefox often take much longer. If I close it and open again, it loads in reasonable time (<1 second). I got Intel Core i5-2500K CPU @ 3.30GHz, so it shouldn't be hardware issue... What is causing this? Disk benchmark: Average read time: 115.5 MB/s (100 samples) Average write time: 98.7 MB/s (100 samples) Average access time: 11.79 msec (1000 samples)

    Read the article

  • Java ME Embedded?Java Embedded Suite????

    - by ksky
    JavaOne 2012??????????????????????Java?2?????????????: Oracle Java ME Embedded ????? ??????? Java ME Embedded???????????????????????????Java???????????CLDC + IMP-NG???????????????130 KB RAM/350 KB ROM???????????????700 KB RAM/1.5 MB ROM???????????????????????????GPIO??????????????????API??XML?Web Service?Location????????API????????? ARM??????????(GUI?????)?????????M2M????????????????????????????????????????????????????NetbBans?Eclipse?????????SDK?????????????ARM KEIL?????(ARM Cortex M-3)????????????????????????? Oracle Java Embedded Suite ????? ??????? Java Embedded Suite??????Java???????????????????????????????1????????????????????????????????????????: Java SE Embedded 7 Java DB 10.8 GlassFish 3.1 Embedded Profile Jersey 1.11 ???Java ME Embedded????????????????????????Java??64MB RAM??70MB?ROM/Flash/Disk????????M2M???????????????????????????????????????????????????????????????????????ARMv6/7 Linux?????x86 Linux????????????????(??????????????)? ??2????????JavaOne?????????????Java Embedded @ JavaOne???????????????????????

    Read the article

  • How to resize(increase) a root+home cloned partition from a smaller hdd?

    - by saulo
    Here is my story: I had a hd failing so I cloned it with dd to larger 500gb hd. It seemed to have worked well, but I have all this unallocated free space at the end of the disk (230gb). I tried to used gparted from a liveUSB to allocate all this space to my root+home partition (other than that I only have a small extended partition with the swap). It won't let me do this. I can only create another partition, or allocate the free space to the extend partition. I can however reduce the size of the root+home partition since I wasn't using all the space Is there a way to put this free space to my root+home partition after all? Or do I have to go with another partition. If so I'd like to separate my home from the root, reduce the root partition and create a ext4 logical home partition. What would be the best safest way to do this? Thanks so much in advance, aloha

    Read the article

  • File recovery of windows after installing ubuntu

    - by user282619
    In one of my computers I installed ubuntu 14.04. Actually , I tried to dual-boot in along with windows 7 and I tried to do the partition during the ubuntu installation procedure. Now all of my 500 GB hard disk has been occupied by ubuntu and I cannot access windows. Since, I have all my documents in windows and I want to recover it. Will I be able to recovery my files of windows ? If yes, can you please help me with the solution ?

    Read the article

  • Grub cannot boot Windows 7 loader entry on 3tb drive

    - by twicejr
    It fails and it says 'cannot find device'. It will work again if I reinstall Windows, and use something like EasyBCD. But I'd like grub as a loader only, can someone help me out here? My system has a regular BIOS (p35-ds4 mainboard) so no UEFI support. Previously ran Windows 8 alongside ubuntu 13.04, now wanted windows 7 again with ubuntu 13.10. I am using disk /dev/sda. 3000.6 GB, 3000591900160 bytes 255 head, 63 sectors/track, 364801 cylinders, 5860531055 sectors Sector size (logical/fysical): 512 bytes / 4096 bytes Device Begin End Blocks ID System /dev/sda1 2048 419432447 209715200 83 Linux /dev/sda2 419432448 436013055 8290304 82 Linux swap /dev/sda3 436015102 1576339455 570162177 5 extended Partition 3 does not start on a fysical sector limit. /dev/sda4 * 1576339456 5860530175 2142095360 7 HPFS/NTFS/exFAT /dev/sda5 436015104 855443455 209714176 7 HPFS/NTFS/exFAT /dev/sda6 855445504 1576339455 360446976 7 HPFS/NTFS/exFAT

    Read the article

  • Ubuntu 13.10 on SSD (system) and HDD (data). Missing /grub/i386-pc/normal.mod

    - by Tatarkow
    I've got HDD (750 GB) and SSD (16 GB). I want to install Ubuntu (13.10) on SSD, but because of its smallness I need to install /home, /var and /tmp on HDD. After that I would like to install Windows (system + data) on another partition of that HDD, but it is not important now. I installed Ubuntu (I had formatted and partitioned the disk before), but when I restarted my laptop it said: 'error: file '/grub/i386-pc/normal.mod' not found. grub rescue'. I tried to reinstall Grub 2 using this tutorial (as sdXY I used sdb1, because it's the only one partion of my SSD), but it didn't work. Can anybody help me, please? Thanks, Tatarkow

    Read the article

  • I need to get past my permissions to recover data

    - by adsmz
    Due to some mishaps, I am unable to boot into Kubuntu at all. However, my data is still on the hard drive. I managed to get one of the other two computers to which I have access to read the disk by booting into a liveCD session of kubuntu. The only storage medium to which I have access is a 30 GB data stick. Here's where the trouble starts: In music alone, I have to back up about 60 GB. Obviously this is going to have to be split into chunks and moved over to the second spare PC until I can reinstall Kubuntu on my laptop. All of the data that needs backed up is behind a permissions wall, so while I can view it, I can't interact with it directly. I know copying and moving through the terminal can get around this with sudo cp or sudo mv, but is there a way to first compress multiple folders in a single archive, then move it? (While we're on the subject, what compression method would be best for large volumes of music in MP3, WAV, and OGG format?)

    Read the article

  • How do you remove Ubuntu? [closed]

    - by Severus
    Possible Duplicate: How to remove Ubuntu and put Windows back on? I have no idea what was deleted or uninstalled or even what system ran previously on the computer. The computers are public computers for an office and no one know's how to use this system! Most people can't figure it out and have never even heard of it (I have because I knew someone who ran it)!! So how do I remove it? Is there anyway to just do a virtual restore? I'm hoping it was windows 7 on here previously cause don't most 7 systems have a built in windows installation disk iso? Anyone know how or if this can be fixed?? No we don't have the re-installation disks (if we did I would know the system and not have a problem) HELP!!!!

    Read the article

  • How to get MMF2 or similar program

    - by Feldpausch All4
    I took a Game Design class a while ago that used Multimedia Fusion 2. Now I would like to get it on my computer, but I don't have the disk anymore. I have access to the program on my Dad's computer, but I want to get it on mine. Is there a way to get MMF2 for free on my computer? If not, are there any other free game design programs like MMF2 (knowing code is not necessary)? Edit: If I paid the $50 to upgrade to 2.5, could I put it on a second computer, or is that not possible?

    Read the article

  • No partitions in Ubuntu isntallation

    - by user204212
    Today, with the new version of Ubuntu, I have decided to install it in my laptot, but running with Windows 8, which is the OS I have installed now and that I don't want to uninstall, because I need some programs. I have downloaded it and burned into a CD. Everything in the "installation" goes right untill I have to choose where to install it. It doesn't recognise my Windows 8 and, moreover, it sees my disk as it was all empty space (500Gb). I can't install it and I don't know what to do, so let's see if you can help, because you know a lot more than me in this topic :) Thanks!

    Read the article

  • Xcode: Unable to open project... cannot be opened because the project file cannot be parsed...

    - by Chris Butler
    Hi everyone. I have been working for a while to create an iPhone app. Today when my battery was low, I was working and constantly saving my source files then the power went out... Now when I plugged my computer back in and it is getting good power I try to open my project file and I get an error: "Unable to Open Project Project ... cannot be opened because the project file cannot be parsed." Is there a way that people know of that I can recover from this? I tried using an older project file and re inserting it and then compiling. It gives me a funky error which is probably because it isn't finding all the files it wants... I really don't want to rebuild my project from scratch if possible. Thanks in advance. EDIT Ok, I did a diff between this and a slightly older project file that worked and saw that there was some corruption in the file. After merging them (the good and newest parts) it is now working. Great points about the SVN. I have one, but there has been some funkiness trying to sync XCode with it. I'll definitely spend more time with it now... ;-) Thanks for everyone's comments and suggestions.

    Read the article

  • SQLite vs Firebird

    - by rwallace
    The scenario I'm looking at is "This program uses Postgres. Oh, you want to just use it single-user for the moment, and put off having to deal with installing a database server? Okay, in the meantime you can use it with the embedded single-user database." The question is then which embedded database is best. As I understand it, the two main contenders are SQLite and Firebird; so which is better? Criteria: Full SQL support, or as close as reasonably possible. Full text search. Easy to call from C# Locks, or allows you to lock, the database file to make sure nobody tries to run it multiuser and ends up six months down the road with intermittent data corruption in all their backups. Last but far from least, reliability. As I understand it, the disadvantages of SQLite are, No right outer join. Workaround: use left outer join instead. Not much integrity checking. Workaround: be really careful in the application code. No decimal numbers. Workaround: lots of aspirin. None of the above are showstoppers. Are there any others I'm missing? (I know it doesn't support some administrative and code-within-database SQL features, that aren't relevant for this kind of use case.) I don't know anything much about Firebird. What are its disadvantages?

    Read the article

  • BSOD Before Windows Will Loads - Graphics Related

    - by Brian
    Alright deep breath here: (Windows 7 Home Premium 64 bit btw) Today I installed Star Craft 2 Beta. After trying to log in, it had some issues where it said my device stopped working (referring to my video device I have to imagine). After I force quit the game there were some random "hot" (various colors if i remember correctly) pixels on the screen. I decided to reboot and try again with similar results. I figured that maybe my display drivers could stand to be updated (I don't frequently update them as I don't often run into problems). I went out to nVidia's website and grabbed the latest drivers for Windows 7 64 bit GeForce 9 series. (I have SLi-ed 9800 GTs). Everything seemed to install fine and I performed the restart. This is when things went from bad (can't play SC2 beta ;) ) to worse (can't boot into windows!). Initially the very first splash screen - I think it's the bios splash screen - had lines of colored pixels covering it. It then displayed a screen that had lots of "(" on it. After that it showed the normal windows 7 splash screen as if it were going to load into Windows. Before getting much further, it BSODed on me. It was a 0x0000003B stop error. At nvlddmkm.sys. A little digging let verified that this was a problem with an nVidia graphics device, not a real shocker. Windows decided it would try to help me diagnose the problem, which it's only answer to was a System Restore, which did nothing to alleviate the problem. I was able to boot up fine in safe mode and was not able to roll back the driver, however I did uninstall the driver and reboot. I still had the graphical anomalies during the first two screens (same colored "."'s and weird "("'s), but there was NOT a stop error. Windows loaded up, found a default driver for the device and installed it and I restarted to let it load - and had yet another BSOD Stop error. Repeat driver uninstall, this time I reloaded the same version (I think it's possible that I was running a 32 bit version or a vista versus windows 7 version, but I don't have that information handy) of the nVidia driver from their website. Restart, same anomalies, same Stop Error. I am at a loss - At this point all I can think is that the firmware for the Video cards got fried or there's actual damage to the cards which I sincerely hope is not the case but the sooner I know the better. Any insight into what I might be able to do to troubleshoot/fix this problem would be most helpful. Attached below is a dump from DxDiag. Please let me know if there is more info that I could provide. ------------------ System Information ------------------ Time of this report: 3/18/2010, 23:22:48 Machine name: BRIAN-PC Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255) Language: English (Regional Setting: English) System Manufacturer: Dell Inc System Model: XPS 630i BIOS: Phoenix - AwardBIOS v6.00PG Processor: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz (4 CPUs), ~2.3GHz Memory: 8192MB RAM Available OS Memory: 8190MB RAM Page File: 1855MB used, 14521MB available Windows Dir: C:\Windows DirectX Version: DirectX 11 DX Setup Parameters: Not found User DPI Setting: Using System DPI System DPI Setting: 96 DPI (100 percent) DWM DPI Scaling: Disabled DxDiag Version: 6.01.7600.16385 32bit Unicode DxDiag Previously: Crashed in DirectShow (stage 1). Re-running DxDiag with "dontskip" command line parameter or choosing not to bypass information gathering when prompted might result in DxDiag successfully obtaining this information ------------ DxDiag Notes ------------ Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Sound Tab 3: No problems found. Input Tab: No problems found. -------------------- DirectX Debug Levels -------------------- Direct3D: 0/4 (retail) DirectDraw: 0/4 (retail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) --------------- Display Devices --------------- Card name: Manufacturer: Chip type: DAC type: Device Key: Enum\ Display Memory: n/a Dedicated Memory: n/a Shared Memory: n/a Current Mode: 1600 x 1200 (32 bit) (1Hz) Driver Name: Driver File Version: () Driver Version: DDI Version: unknown Driver Model: unknown Driver Attributes: Final Retail Driver Date/Size: , 0 bytes WHQL Logo'd: n/a WHQL Date Stamp: n/a Device Identifier: {D7B70EE0-4340-11CF-B123-B03DAEC2CB35} Vendor ID: 0x0000 Device ID: 0x0000 SubSys ID: 0x00000000 Revision ID: 0x0000 Driver Strong Name: Unknown Rank Of Driver: Unknown Video Accel: Deinterlace Caps: n/a D3D9 Overlay: n/a DXVA-HD: n/a DDraw Status: Not Available D3D Status: Not Available AGP Status: Not Available ------------- Sound Devices ------------- Description: Speakers (Realtek High Definition Audio) Default Sound Playback: Yes Default Voice Playback: Yes Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10280249&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 8/18/2008 04:05:28, 1485592 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0x0 Min/Max Sample Rate: 0, 0 Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No Description: Realtek Digital Output (Realtek High Definition Audio) Default Sound Playback: No Default Voice Playback: No Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10280249&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 8/18/2008 04:05:28, 1485592 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0x0 Min/Max Sample Rate: 0, 0 Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No Description: Realtek HDMI Output (Realtek High Definition Audio) Default Sound Playback: No Default Voice Playback: No Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10280249&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 8/18/2008 04:05:28, 1485592 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0x0 Min/Max Sample Rate: 0, 0 Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No --------------------- Sound Capture Devices --------------------- Description: Microphone (Realtek High Definition Audio) Default Sound Capture: Yes Default Voice Capture: Yes Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail Date and Size: 8/18/2008 04:05:28, 1485592 bytes Cap Flags: 0x0 Format Flags: 0x0 Description: Realtek Digital Input (Realtek High Definition Audio) Default Sound Capture: No Default Voice Capture: No Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail Date and Size: 8/18/2008 04:05:28, 1485592 bytes Cap Flags: 0x0 Format Flags: 0x0 ------------------- DirectInput Devices ------------------- Device Name: Mouse Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Device Name: Keyboard Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Device Name: ESA FW Update Attached: 1 Controller ID: 0x0 Vendor/Product ID: 0x0955, 0x000A FF Driver: n/a Poll w/ Interrupt: No ----------- USB Devices ----------- + USB Root Hub | Vendor/Product ID: 0x10DE, 0x026D | Matching Device ID: usb\root_hub | Service: usbhub | +-+ USB Input Device | | Vendor/Product ID: 0x0955, 0x000A | | Location: Port_#0002.Hub_#0001 | | Matching Device ID: generic_hid_device | | Service: HidUsb | | | +-+ HID-compliant device | | | Vendor/Product ID: 0x0955, 0x000A | | | Matching Device ID: hid_device | | +-+ USB Input Device | | Vendor/Product ID: 0x046D, 0xC01E | | Location: Port_#0003.Hub_#0001 | | Matching Device ID: generic_hid_device | | Service: HidUsb | | | +-+ HID-compliant mouse | | | Vendor/Product ID: 0x046D, 0xC01E | | | Matching Device ID: hid_device_system_mouse | | | Service: mouhid ---------------- Gameport Devices ---------------- ------------ PS/2 Devices ------------ + Standard PS/2 Keyboard | Matching Device ID: *pnp0303 | Service: i8042prt | + Terminal Server Keyboard Driver | Matching Device ID: root\rdp_kbd | Upper Filters: kbdclass | Service: TermDD | + Terminal Server Mouse Driver | Matching Device ID: root\rdp_mou | Upper Filters: mouclass | Service: TermDD ------------------------ Disk & DVD/CD-ROM Drives ------------------------ Drive: C: Free Space: 324.3 GB Total Space: 608.4 GB File System: NTFS Model: WDC WD64 00AAKS-75A7B SCSI Disk Device Drive: D: Free Space: 1.0 GB Total Space: 2.0 GB File System: NTFS Model: WDC WD64 00AAKS-75A7B SCSI Disk Device Drive: E: Model: TSSTcorp DVD+-RW TS-H653F SCSI CdRom Device Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7600.16385 (English), , 0 bytes -------------- System Devices -------------- Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_10DE&DEV_03B7&SUBSYS_000010DE&REV_A1\3&2411E6FE&1&18 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AF&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0A Driver: n/a Name: PCI standard host CPU bridge Device ID: PCI\VEN_10DE&DEV_03A3&SUBSYS_02491028&REV_A2\3&2411E6FE&1&00 Driver: n/a Name: NVIDIA nForce Serial ATA Controller Device ID: PCI\VEN_10DE&DEV_0267&SUBSYS_02491028&REV_A1\3&2411E6FE&1&78 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B6&SUBSYS_02491028&REV_A1\3&2411E6FE&1&10 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AE&SUBSYS_02491028&REV_A1\3&2411E6FE&1&09 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_0272&SUBSYS_02491028&REV_A3\3&2411E6FE&1&52 Driver: n/a Name: NVIDIA nForce Serial ATA Controller Device ID: PCI\VEN_10DE&DEV_0266&SUBSYS_02491028&REV_A1\3&2411E6FE&1&70 Driver: n/a Name: LSI 1394 OHCI Compliant Host Controller Device ID: PCI\VEN_11C1&DEV_5811&SUBSYS_02491028&REV_70\4&14591D7E&0&2880 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B5&SUBSYS_02491028&REV_A1\3&2411E6FE&1&06 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AD&SUBSYS_02491028&REV_A1\3&2411E6FE&1&08 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_0270&SUBSYS_02491028&REV_A2\3&2411E6FE&1&48 Driver: n/a Name: Standard Dual Channel PCI IDE Controller Device ID: PCI\VEN_10DE&DEV_0265&SUBSYS_02491028&REV_A1\3&2411E6FE&1&68 Driver: n/a Name: NVIDIA GeForce 9800 GT Device ID: PCI\VEN_10DE&DEV_0605&SUBSYS_062D10DE&REV_A2\4&4BABE2A&0&0028 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B4&SUBSYS_02491028&REV_A1\3&2411E6FE&1&07 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AC&SUBSYS_02491028&REV_A1\3&2411E6FE&1&01 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_10DE&DEV_026F&SUBSYS_CB8410DE&REV_A2\3&2411E6FE&1&80 Driver: n/a Name: NVIDIA nForce PCI System Management Device ID: PCI\VEN_10DE&DEV_0264&SUBSYS_02491028&REV_A3\3&2411E6FE&1&51 Driver: n/a Name: NVIDIA GeForce 9800 GT Device ID: PCI\VEN_10DE&DEV_0605&SUBSYS_062D10DE&REV_A2\4&10BD3C89&0&0018 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B3&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0E Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AB&SUBSYS_02491028&REV_A1\3&2411E6FE&1&04 Driver: n/a Name: Standard Enhanced PCI to USB Host Controller Device ID: PCI\VEN_10DE&DEV_026E&SUBSYS_02491028&REV_A3\3&2411E6FE&1&59 Driver: n/a Name: PCI standard ISA bridge Device ID: PCI\VEN_10DE&DEV_0260&SUBSYS_02491028&REV_A3\3&2411E6FE&1&50 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03BC&SUBSYS_02491028&REV_A1\3&2411E6FE&1&11 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B2&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0D Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AA&SUBSYS_02491028&REV_A1\3&2411E6FE&1&02 Driver: n/a Name: Standard OpenHCD USB Host Controller Device ID: PCI\VEN_10DE&DEV_026D&SUBSYS_02491028&REV_A3\3&2411E6FE&1&58 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03BA&SUBSYS_02491028&REV_A1\3&2411E6FE&1&12 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B1&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0C Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03A9&SUBSYS_02491028&REV_A1\3&2411E6FE&1&03 Driver: n/a Name: High Definition Audio Controller Device ID: PCI\VEN_10DE&DEV_026C&SUBSYS_02491028&REV_A2\3&2411E6FE&1&81 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_10DE&DEV_03B8&SUBSYS_000010DE&REV_A1\3&2411E6FE&1&28 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B0&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0B Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03A8&SUBSYS_02491028&REV_A2\3&2411E6FE&1&05 Driver: n/a Name: NVIDIA nForce Networking Controller Device ID: PCI\VEN_10DE&DEV_0269&SUBSYS_02491028&REV_A3\3&2411E6FE&1&A0 Driver: n/a --------------- EVR Power Information --------------- Current Setting: {5C67A112-A4C9-483F-B4A7-1D473BECAFDC} (Quality) Quality Flags: 2576 Enabled: Force throttling Allow half deinterlace Allow scaling Decode Power Usage: 100 Balanced Flags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 50 PowerFlags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 0

    Read the article

  • Where is the C precompiler for Oracle10g located?

    - by HY
    I am looking for a newer version of the Pro*C/C++ to upgrade my procui.exe 9.0.1.1.1. I downloaded the 10g client disk and when install I have the following options: instant client administrator runtime custom I dont seem to able to find the actual program other than just getting some common files. Can someone help?

    Read the article

  • Embedding SWF in Powerpoint VSTO

    - by Amitd
    hi guys, I was wondering if there is someway to embed a Flash Shockwave Object or .SWF file in MS Powerpoint (Presentation) 2007 and higher version. ie inside ".pptx" formats . by embed i mean when i save the presentation,close it . i wont be needing the the .swf file again.that way i can share the Presentations with others. If i use this link Insert-Flash-Into-PowerPoint-2007,it works but when i save and close the presentation,the swf file doesnt get embeded. (Note:if i do the same with a .ppt file,it works correctly.) I know we can embed the swf inside powerpoint presentation version 2003 ie.".ppt" format. but couldn't do the same in .pptx format. Also is it possible to embed .swf file in .pptx using OpenXML format? I tried to rename the ".pptx" file to ".zip" and added the ".swf" in media folder. and then renamed it back to ".pptx",but when opened in Powerpoint,it gave error about unreadable content or corruption. I had read somewhere that its kind of strategy from MS not to provide this kind of support for Adobe Swf file / ActiveX object. and as of now the feature is not supported. Flashppt PPTX Embed not supported I tried the same with office 2010 and still the same result.it doesnt work. Anyone has any workarounds etc? Related links: Insert-Flash-Into-PowerPoint-2007 flashgeek support.microsoft Flashppt PPTX Embed not supported thx Amitd

    Read the article

  • File upload and Download in a web app using struts2

    - by lakshmanan
    Hi In struts2 upload methods, can I choose where the uploaded file must be saved. I mean, all the examples in web ask me to store in WEB-INF which surely is not a good idea. I want to be able to store the uploaded file in any place in my disk. How should i do it? Can i do it with help of ServletContextAware interceptor ?

    Read the article

  • Lots of questions about file I/O (reading/writing message strings)

    - by Nazgulled
    Hi, For this university project I'm doing (for which I've made a couple of posts in the past), which is some sort of social network, it's required the ability for the users to exchange messages. At first, I designed my data structures to hold ALL messages in a linked list, limiting the message size to 256 chars. However, I think my instructors will prefer if I save the messages on disk and read them only when I need them. Of course, they won't say what they prefer, I need to make a choice and justify the best I can why I went that route. One thing to keep in mind is that I only need to save the latest 20 messages from each user, no more. Right now I have an Hash Table that will act as inbox, this will be inside the user profile. This Hash Table will be indexed by name (the user that sent the message). The value for each element will be a data structure holding an array of size_t with 20 elements (20 messages like I said above). The idea is to keep track of the disk file offsets and bytes written. Then, when I need to read a message, I just need to use fseek() and read the necessary bytes. I think this could work nicely... I could use just one single file to hold all messages from all users in the network. I'm saying one single file because a colleague asked an instructor about saving the messages from each user independently which he replied that it might not be the best approach cause the file system has it's limits. That's why I'm thinking of going the single file route. However, this presents a problem... Since I only need to save the latest 20 messages, I need to discard the older ones when I reach this limit. I have no idea how to do this... All I know is about fread() and fwrite() to read/write bytes from/to files. How can I go to a file offset and say "hey, delete the following X bytes"? Even if I could do that, there's another problem... All offsets below that one will be completely different and I would have to process all users mailboxes to fix the problem. Which would be a pain... So, any suggestions to solve my problems? What do you suggest?

    Read the article

< Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >