Search Results

Search found 7855 results on 315 pages for 'solutions'.

Page 228/315 | < Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >

  • Android Array Lag?

    - by Mike
    I am making a platform game for Android. It is sort of a tile based game. I added bullets and enemies with AI and a bunch of tile types. I created a simple map with no Enemies. Everything was running well and smooth until I shot a bunch of bullets randomly everywhere. A couple of hundreds of bullets later, the FPS lowered. I made a test to find out if the bullets were the problem so I made another simple map with just a tile to stand on and left it for a while. Minutes later, I played around with it a bit to check if the FPS changed and it didnt. I reloaded the same map and shot a lot of bullets. Minutes later, the FPS was visibly lower even after the number of bullets were zero. Points to note: Programmed FPS is 30 Tested on a Samsung Galaxy Y and Samsung Galaxy W Any tile, enemy, bullet that is off screen is not drawn to prevent lag Bullets collide with Tiles (if they dont collide with in 450 frames, they are removed from the array) I used List bullets = new ListArray(); I used bullets.add(new Bullet(x, y, params...)); I used for(...){ if(...){ bullets.remove(i); } } Code for bullet: private void drawBullets(Canvas canvas) { for (int i = 0; i < bullets.size(); i++) { Bullet b = bullets.get(i); b.update(canvas); //updates physics if (b.t > blm) { //if the bullet is past its expiry bullets.remove(i); i--; } else { if (svx((b.x)) > 0 && svx(b.x) < width && svy((b.y)) > 0 && svy(b.y) < height) { // if bullet is not off screen b.draw(canvas); // draw the bullet } } } } I tried searching for solutions and references but I have no luck. I'm guessing that the lag has something to do with the Array and the Bullets or Classes that I've loaded? I'm not sure! Someone please help! Thanks in advance! :)

    Read the article

  • Calculating a circle or sphere along a vector

    - by Sparky
    Updated this post and the one at Math SE (http://math.stackexchange.com/questions/127866/calculating-a-circle-or-sphere-along-a-vector), hope this makes more sense. I previously posted a question (about half an hour ago) involving computations along line segments, but the question and discussion were really off track and not what I was trying to get at. I am trying to work with an FPS engine I am attempting to build in Java. The problem I am encountering is with hitboxing. I am trying to calculate whether or not a "shot" is valid. I am working with several approaches and any insight would be helpful. I am not a native speaker of English nor skilled in Math so please bear with me. Player position is at P0 = (x0,y0,z0), Enemy is at P1 = (x1,y1,z1). I can of course compute the distance between them easily. The target needs a "hitbox" object, which is basically a square/rectangle/mesh either in front of, in, or behind them. Here are the solutions I am considering: I have ruled this out...doesn't seem practical. [Place a "hitbox" a small distance in front of the target. Then I would be able to find the distance between the player and the hitbox, and the hitbox and the target. It is my understanding that you can compute a circle with this information, and I could simply consider any shot within that circle a "hit". However this seems not to be an optimal solution, because it requires you to perform a lot of calculations and is not fully accurate.] Input, please! Place the hitbox "in" the player. This seems like the better solution. In this case what I need is a way to calculate a circle along the vector, at whatever position I wish (in this case, the distance between the two objects). Then I can pick some radius that encompasses the whole player, and count anything within this area a "hit". I am open to your suggestions. I'm trying to do this on paper and have no familiarity with game engines. If any software folk out there think I'm doing this the hard way, I'm open to help! Also - Anyone with JOGL/LWJGL experience, please chime in. Is this making sense?

    Read the article

  • Play Framework Plugin for NetBeans IDE

    - by Geertjan
    The start of minimal support for the Play Framework in NetBeans IDE 7.3 Beta would constitute (1) recognizing Play projects, (2) an action to run a Play project, and (3) classpath support. Well, most of that I've created already, as can be seen, e.g., below you can see logical views in the Projects window for Play projects (i.e., I can open all the samples that come with the Play distribution). Right-clicking a Play project lets you run it and, if the embedded browser is selected in the Options window, you can see the result in the IDE. Make a change to your code and refresh the browser, which immediately shows you your changes: What needs to be done, among other things: A wizard for creating new Play projects, i.e., it would use the Play command line to create the application and then open it in the IDE. Integration of everything available on the Play command line. Maybe the logical view, i.e., what is shown in the Projects window, should be changed. Right now, only the folders "app" and "test" are shown there, with everything else accessible in the Files window, as can be seen in the screenshot above. More work on the classpath, i.e., I've hardcoded a few things just to get things to work correctly. Options window extension to register the Play executable, instead of the current hardcoded solution. Scala integrations, i.e., investigate if/how the NetBeans Scala plugin is helpful and, if not, create different/additional solutions. E.g., the HTML templates are partly in Scala, i.e., need to embed Scala support into HTML. Hyperlinking in the "routes" file, as well as special support for the "application.conf" file. Anyone interested, especially if you're a Play fan (a "playboy"?), in joining me in working on this NetBeans plugin? I'll be uploading the sources to a java.net repository soon. It will be here, once it has been made publicly accessible: http://java.net/projects/nbplay/sources/nbplay Kind of cool detail is that the NetBeans plugin is based on Maven, which means that you could use any Maven-supporting IDE to work on this plugin.

    Read the article

  • "You are missing the following 32-bit libraries, and Steam may not run: libc.so.6" The common fixes don't work,

    - by M_Steam_User
    So I know this is a problem that has been asked around a lot, but I've tried a bunch of solutions with no success. I'm running Ubuntu 12.04 (64 bit), and I just installed it yesterday. This is my first time working with linux. The error is: You are missing the following 32-bit libraries, and Steam may not run: libc.so.6 Things I've tried. First, I had downloaded from the steam website. I uninstalled it, and tried again from the ubuntu software centre. sudo apt-get update sudo apt-get install ia32-libs sudo apt-get upgrade This installed a bunch of the 32 bit libraries, but did not fix the issue. This seems like the major fix for most people. The direct approach of sudo apt-get install libc.so.6 returns this: Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package libc.so.6 E: Couldn't find any package by regex 'libc.so.6' I guess libc.so.6 isn't a package, just a single file or something? I also tried gksudo gedit /etc/ld.so.conf.d/steam.conf Added these two lines, those the second one was all ready in the file, but copied over: /usr/lib32 /usr/lib/i386-linux-gnu/mesa Then executed: sudo ldconfig But nothing seemed to happen, steam still doesn't work. So, I feel like it is more likely that I have the library and steam isn't looking in the right place. One thing I've seen is people usually reference /usr/local/lib/ for your library locations. However, I can't find where to cd into /usr/, it isn't in my home folder. If /usr/ is the home folder, there is only a /.local folder which only has /share, no lib anywhere. Sorry for my linux ignorance. I appreciate any help, I honestly have no idea how to confirm I have the library and point steam to it, or if that is even the right thing to do. Edit: Tried this, not entirely sure what it means ~$ ls -l /lib32/libc* -rwxr-xr-x 1 root root 1721832 Sep 30 11:06 /lib32/libc-2.15.so -rw-r--r-- 1 root root 185928 Sep 30 11:06 /lib32/libcidn-2.15.so lrwxrwxrwx 1 root root 15 Sep 30 11:06 /lib32/libcidn.so.1 -> libcidn-2.15.so -rw-r--r-- 1 root root 34316 Sep 30 11:06 /lib32/libcrypt-2.15.so lrwxrwxrwx 1 root root 16 Sep 30 11:06 /lib32/libcrypt.so.1 -> libcrypt-2.15.so lrwxrwxrwx 1 root root 12 Sep 30 11:06 /lib32/libc.so.6 -> libc-2.15.so

    Read the article

  • android multitouch problem

    - by Max
    Im aware that there a a couple of posts on this matter, but Ive tried all of them and none of them gets rid of my problem. Im starting to get close to the end of my game so I bought a cabel to try it on a real phone, and as I expected my multitouch dosnt work. I use 2 joysticks, one to move my character and one to change his direction so he can shoot while walking backwards etc. my local variable: public void update(MotionEvent event) { if (event == null && lastEvent == null) { return; } else if (event == null && lastEvent != null) { event = lastEvent; } else { lastEvent = event; } int index = event.getActionIndex(); int pointerId = event.getPointerId(index); statement for left Joystick: if (pointerId == 0 && event.getAction() == MotionEvent.ACTION_DOWN && (int) event.getX() > steeringxMesh - 50 && (int) event.getX() < steeringxMesh + 50 && (int) event.getY() > yMesh - 50 && (int) event.getY() < yMesh + 50) { dragging = true; } else if (event.getAction() == MotionEvent.ACTION_UP) { dragging = false; } if (dragging) { //code for moving my character statement for my right joystick: if (pointerId == 1 && event.getAction() == MotionEvent.ACTION_DOWN && (int) event.getX() > shootingxMesh - 50 && (int) event.getX() < shootingxMesh + 50 && (int) event.getY() > yMesh - 50 && (int) event.getY() < yMesh + 50) { shooting = true; } else if (event.getAction() == MotionEvent.ACTION_UP) { shooting = false; } if (shooting) { // code for aiming } This class is my main-Views onTouchListener and is called in a update-method that gets called in my game-loop, so its called every frame. Im really at a loss here, I've done a couple of tutorials and Ive tried all relevant solutions to similar posts. Can post entire Class if necessary but I think this is all the relevant code. Just hope someone can make some sence out of this.

    Read the article

  • Variable number of GUI Buttons

    - by Wakaka
    I have a generic HTML5 Canvas GUI Button class and a Scene class. The Scene class has a method called createButton(), which will create a new Button with onclick parameter and store it in a list of buttons. I call createButton() for all UI buttons when initializing the Scene. Because buttons can appear and disappear very often during rendering, Scene would first deactivate all buttons (temporarily remove their onclick, onmouseover etc property) before each render frame. During rendering, the renderer would then activate the required buttons for that frame. The problem is that part of the UI requires a variable number of buttons, and their onclick, onmouseover etc properties change frequently. An example is a buffs system. The UI will list all buffs as square sprites for the current unit selected, and mousing over each square will bring up a tooltip with some information on the buff. But the number of buffs is variable thus I won't know how many buttons to create at the start. What's the best way to solve this problem? P.S. My game is in Javascript, and I know I can use HTML buttons, but would like to make my game purely Canvas-based. Create buttons on-the-fly during rendering. Thus I will only have buttons when I require them. After the render frame these buttons would be useless and removed. Create a fixed set of buttons that I'm going to assume the number of buffs per unit won't exceed. During each render frame activate the buttons accordingly and set their onmouseover property. Assign a button to each Buff instance. This sounds wrong as the buff button is a part of the GUI which can only have one unit selected. Assigning a button to every single Buff in the game seems to be overkill. Also, I would need to change the button's position every render frame since its order in the unit's list of buffs matter. Any other solutions? I'm actually quite for idea (1) but am worried about the memory/time issues of creating a new Button() object every render frame. But this is in Javascript where object creation is oh-so-common ({} mainly) due to automatic garbage collection. What is your take on this? Thanks!

    Read the article

  • Developing web sites that imitate desktop apps. How to fight that paradigm? [closed]

    - by user1598390
    Supposse there's a company where web sites/apps are designed to resemble desktop apps. They struggle to add: Splash screens Drop-down menus Tab-pages Pages that don't grow downward with content, context is inside scrollable area so page is of a fixed size, as if resembling the one-screen limitation of desktop apps. Modal windows, pop-ups, etc. Tree views Absolutely no access to content unless you login-first, even with non-sensitive content. After splash screen desapears, you are presented with a login screen. No links - just simulated buttons. Fixed page-size. Cannot open a linked in other tab Print button that prints directly ( not showing printable page so the user can't print via the browser's print command ) Progress bars for loading content even when the browser indicates it with its own animation Fonts and color amulate a desktop app made with Visual Basic, PowerBuilder etc. Every app seems almost as if were made in Visual Basic. They reject this elements: Breadcrumbs Good old underlined links Generated/dynamic navigation, usage-based suggestions Ability to open links in multiple tabs Pagination Printable pages Ability to produce a URL you can save or share that links to an item, like when you send someone the link to an especific StackExchange question. The only URL is the main one. Back button To achieve this, tons of javascript code is needed. Lots and lots of Javascript and Ajax code for things not related with the business but with the necessity to hide/show that button, refresh this listbox, grey-out that label, etc. The coplexity generated by forcing one paradigm into another means most lines of code are dedicated to maintain the illusion of a desktop app. What is the best way to change this mindset, and make them embrace the web, and start producing modern, web apps instead of desktop imitations ? EDIT: These sites are intranet sites. Users hate these apps. They constantly whine about them, but they have to use them to do their daily work. These sites are in-house solutions, the end-users have no choice but to use them. They are a "captive audience". Also, substitution will not happen because of high costs. But at least if that mindset is changed, new developments would be more web-like.

    Read the article

  • Object Oriented Design of a Small Java Game

    - by user2733436
    This is the problem i am dealing with. I have to make a simple game of NIM. I am learning java using a book so far i have only coded programs that deal with 2 classes. This program would have about 4 classes i guess including the main class. My problem is i am having a difficult time designing classes how they will interact with each other. I really want to think and use a object oriented approach. So the first thing i did was design the Pile CLASS as it seemed the easiest and made the most sense to me in terms of what methods go in it. Here is what i have got down for the Pile Class so far. package Nim; import java.util.Random; public class Pile { private int initialSize; public Pile(){ } Random rand = new Random(); public void setPile(){ initialSize = (rand.nextInt(100-10)+10); } public void reducePile(int x){ initialSize = initialSize - x; } public int getPile(){ return initialSize; } public boolean hasStick(){ if(initialSize>0){ return true; } else { return false; } } } Now i need help in designing the Player Class. By that i mean i am not asking for anyone to write code for me as that defeats the purpose of learning i was just wondering how would i design the player class and what would go on it. My guess is that the player class would contain method for choosing move for computer and also receiving the move human user makes. Lastly i am guessing in the Game class i am guessing the turns would be handeled. I am really lost right now so i was wondering if someone can help me think through this problem it would be great. Starting with the player class would be appreciated. I know there are some solutions for this problem online but i refuse to look at because i want to develop my own approach to such problems and i am confident if i can get through this problem i can solve other problems. I apologize if this question is a bit poor but in specific i need help in designing the Player class.

    Read the article

  • SSMS Tools Pack 3.0 is out. Full SSMS 2014 support and improved features.

    - by Mladen Prajdic
    With version 3.0 the SSMS 2014 is fully supported. Since this is a new major version you'll eventually need a new license. Please check the EULA to see when. As a thank you for your patience with this release, everyone that bought the SSMS Tools Pack after April 1st, the release date of SQL Server 2014, will receive a free upgrade. You won't have to do anything for this to take effect. First thing you'll notice is that the UI has been completely changed. It's more in line with SSMS and looks less web-like. Also the core has been updated and rewritten in some places to be better suited for future features. Major improvements for this release are: Window Connection Coloring Something a lot of people have asked me over the last 2 years is if there's a way to color the tab of the window itself. I'm very glad to say that now it is. In SSMS 2012 and higher the actual query window tab is also colored at the top border with the same color as the already existing strip making it much easier to see to which server your query window is connected to even when a window is not focused. To make it even better, you can not also specify the desired color based on the database name and not just the server name. This makes is useful for production environments where you need to be careful in which database you run your queries in. Format SQL The format SQL core was rewritten so it'll be easier to improve it in future versions. New improvement is the ability to terminate SQL statements with semicolons. This is available only in SSMS 2012 and up. Execution Plan Analyzer A big request was to implement the Problems and Solutions tooltip as a window that you can copy the text from. This is now available. You can move the window around and copy text from it. It's a small improvement but better stuff will come. SQL History Current Window History has been improved with faster search and now also shows the color of the server/database it was ran against. This is very helpful if you change your connection in the same query window making it clear which server/database you ran query on. The option to Force Save the history has been added. This is a menu item that flushes the execution and tab content history save buffers to disk. SQL Snippets Added an option to generate snippet from selected SQL text on right click menu. Run script on multiple databases Configurable database groups that you can save and reuse were added. You can create groups of preselected databases to choose from for each server. This makes repetitive tasks much easier New small team licensing option A lot of requests came in for 1 computer, Unlimited VMs option so now it's here. Hope it serves you well.

    Read the article

  • Extra, Extra, Read All About It- Offer Ends Soon!

    - by Kristin Rose
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Start spreading the news... Your partner news of course by submitting all interesting presentation ideas to the Oracle OpenWorld 2012 Call for Papers. Though you may not be able to serenade your customers with a voice like Sinatra’s, you can still get their attention by sharing your customer solutions, highlighting your achievements and attempting your best “Old Blue Eyes” impersonation. This call for papers will end April 9th, 2012 so don’t be a stranger in the night; instead fly your company to the moon and back by getting those papers in. May luck be a lady or simply on your side, as all accepted submission speakers will receive a complimentary pass to the event they have been accepted for. Yes you’re lovely, so why wait any longer? Join the Oracle OpenWorld 2012 ‘Rat Pack’ today by watching the video below or submitting to the call for papers. The best is yet to come, The OPN Communications Team

    Read the article

  • WiFi on Ubuntu 12.04 custom: downloading unbearably slow

    - by Mark
    iwconfig reports 11 Mbps, yet I've seen as low as <1 KBps. This is the latest in my laundry list of Ubuntu problems in a dual-boot machine (cyberpowerpc custom, intel i7-3820, nvidia gtx 570). I received it two days ago, Windows 7 running fine, still having problems with Ubuntu. The browsing is intermittent but unacceptable. e.g. I could get to this site last night but I couldn't post this question. The downloading is unbearably slow, I can't download anything or install any packages because the speed is so slow. e.g. I am trying to install vim which is inexplicably missing from my 12.04 install (add another one to the problems list) and my download speed reported in the terminal was 241 B/s. Yes, bytes. iwconfig reports 11 Mbps, which further adds to the confusion. User@ubuntu:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"linksys" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:39:76:2C:A1 Bit Rate=11 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:54 Invalid misc:18 Missed beacon:0 eth0 no wireless extensions. Any ideas? I see this is a problem a lot of people, but none of the on line solutions have worked for me so far. e.g. one site recommends editing the ath9k.conf file in /etc/modprobe.d, yet this file isn't even in the folder: User@ubuntu:/$ cd etc/modprobe.d User@ubuntu:/etc/modprobe.d$ ls alsa-base.conf blacklist-oss.conf blacklist-ath_pci.conf blacklist-rare-network.conf blacklist.conf blacklist-watchdog.conf blacklist-firewire.conf dkms.conf blacklist-framebuffer.conf nvidia-current_hybrid.conf blacklist-modem.conf nvidia-graphics-drivers.conf I think the nvidia gpu might be mucking things up. I had the "blinking cursor" problem when installing in the first place, and then I had the monitor out of range problem as well. I have my faithful Asus laptop, which is running Ubuntu 12.04 just fine. The only difference is executing host -t SOA local in the terminal gives User@ubuntu:~$ host -t SOA local local has SOA record local. nobody.localhost. 42 86400 43200 604800 10800 in my new machine, and the command reports Host local. not found in the laptop. Help would be most welcome, as I am in danger of reverting back to Windows. I'm seriously considering it. Sorry for the length, trying to show my effort in resolving the issue and include terminal snippets that might be helpful.

    Read the article

  • Redesigning an Information System - Part 1

    - by dbradley
    Through the next few weeks or months I'd like to run a small series of articles sharing my experiences from the largest of the project I've worked on and explore some of the real-world problems I've come across and how we went about solving them. I'm afraid I can't give too many specifics on the project right now as it's not yet complete so you'll have to forgive me for being a little abstract in places! To start with I'm going to run through a little of the background of the problem and the motivations to re-design from scratch. Then I'll work through the approaches taken to understanding the requirements, designing, implementing, testing and migrating to the new system. Motivations for Re-designing a Large Information System The system is one that's been in place for a number of years and was originally designed to do a significantly different one to what it's now being used for. This is mainly due to the product maturing as well as client requirements changing. As with most information systems this one can be defined in four main areas of functionality: Input – adding information to the system Storage – persisting information in an efficient, searchable structure Output – delivering the information to the client Control – management of the process There can be a variety of reasons to re-design an existing system; a few of our own turned out to be factors such as: Overall system reliability System response time Failure isolation and recovery Maintainability of code and information General extensibility to solve future problem Separation of business and product concerns New or improved features The factor that started the thought process was the desire to improve the way in which information was entered into the system. However, this alone was not the entire reason for deciding to redesign. Business Drivers Typically all software engineers would always prefer to do a project from scratch themselves. It generally means you don't have to deal with problems created by predecessors and you can create your own absolutely perfect solution. However, the reality of working within a business is that the bottom line comes down to return on investment. For a medium sized business such as mine there must be actual value able to be delivered within a reasonable timeframe for any work to be started. As a result, any long term project will generally take a lot of effort and consideration to be approved by those in charge and therefore it might be better to break down the project into more manageable chunks which allow more frequent deliverables and also value within a shorter timeframe. As the only thing of concern was the methods for inputting information, this is where we started with requirements gathering and design. However knowing that there might be more to the problem and not limiting your design decisions before the requirements is key to finding the best solutions.

    Read the article

  • Deleted Myself from Admin Group - Now Getting Error usermod: cannot lock /etc/passwd; try again later

    - by BubbaJ
    I have a laptop with Ubuntu 11.10 that is shared between myself and two other family members. My user id was setup as the only "Administrator" on the laptop. The other users were setup as "Standard" users. In my attempt to try to add myself to the user groups for the other users, I somehow deleted myself from the admin groups. I used the "usermod" command from the terminal. I must have neglected to include the proper switches or syntax for the update. It looks like I successfully added my userid to the group associated with my wife's account. When I use the "groups" command, I can see only my id and my wife's id in the list. I no longer see the "admin" or "adm" groups, and others that used to be listed. When I go into System Settings User Accounts it looks like my ID is now listed as a "Standard" user. I would like to change my account back to "Administrator", but now I can't. I did some searches for solutions and found that I would need to boot into Recovery Mode and execute the usermod command from the root session. I was able to successfully boot into Recovery Mode and get to the root session. I was trying to execute the command "usermod -a -G admin user1" to add my id (user1) back to the admin group. When I execute the command from the root session, I get the error message "usermod: cannot lock /etc/passwd; try again later". I tried preceding the usermod command with "sudo", but it didn't make a difference, same error. I then tried adding a new user using adduser, thinking I would try to create a new userid and make the new userid part of the admin group. I get the same error using the adduser command. I saw some posts that recommend looking for and deleting files that end in ".lock" in the etc directory. The only file I found was .pwd.lock which I haven't touched. I am at a loss as to what to try next. I am relatively inexperienced with Ubuntu and Linux, so alot of this is new to me. Any help you can provide would be much appreciated.

    Read the article

  • How are software projects 'typically' managed/deployed

    - by rguilbault
    My company is evaluating adopting off-the-shelf ALM products to aid in our development lifecycle; we currently use our own homegrown solutions to manage requirements gathering, specification documentation, testing, etc. One of the issues I am having is that we have what we call a pipeline, which consists of particular stops: [Source] - [QC] - [Production] At the first stop, the developer works out a solution to some requested change and performs individual testing. When that process is complete (and peer review has been performed), our ALM system physically moves the affected programs from the [Source] runtime environment to the [QC] runtime environment. You can think of this as analogous to moving some web pages from the 'test' server to the 'live' server, where QC personnel can bang on the system and complain that the developer has it all wrong ;-) Once QC signs off that the changes are working, the system again moves the code along to the next stage, where additional testing is performed, etc. I have been searching the internet for a few days trying to find how the process is accomplished anywhere else -- I have read a bit about builds, automated testing, various ALM products, etc. but nowhere does any of this state how builds interact with initial change requests, what the triggers are, how dependencies are managed, how the various forms of testing are accommodated (e.g. unit testing, integration testing, regression testing), etc. Can anyone point me to any resources or attempt to explain (generically) how a change could/should be tracked and moved though the development lifecycle? I'd be very appreciative. To keep things consistent, let's say that we have a project called Calculator, which we want to add support for the basic trigonometric functions: sine, cosine and tangent. I'm open to reorganizing the company however we need to in order to accomplish due diligence testing and we can suppose that any tools are available for use (if that helps to illustrate the process). To start things off, I think I understand this much: we document the requirements, e.g.: support sine, cosine and tangent functions we create some type of change request/work order to assign to programming coding takes place, commits are made to version control peer review commences programmer marks the work order as completed? ... now what? How does QC do their thing? Would they perform testing before closing the 'work order'?

    Read the article

  • A Windows Update Prevented Live Discs From Working? [migrated]

    - by user88311
    First off I'll state my system specs. Acer Aspire M1100 Windows Vista Home Basic 32bit OEM 2 Gigs of DDR2 ram 160Gig hard drive 2.7Ghz AMD Athlon 64 processor ATI Radeon X1250 Graphics card A few days ago my computer did automatic updates and updated windows defender to KB915597 (Definition 1.135.415.0), After which when shutting down and starting up I would receive BSOD with the information BUGCODE_USE_DRIVER and 0x000000FE (0x00000008, 0x00000006, 0x00000006, 0x877330000) upon where my computer would not start up with any USB devices plugged in and it always require me to run startup repair before it started. Upon when I first started it up and was able to fully boot windows, I had no use of the mouse so I was unable to install the fix that the windows solutions center brought up on my screen, so I restarted again and installed the fix hoping it would cease the problem, it did not. Upoon starting up after installing the fix and restarting I was confronted with the BSOD 0x000000FE (0x00000008, 0x00000006, 0x00000006, 0x83291000) at which I found the startup repair could not fix the problem and I restored, as I most like should have in the first place. After going through that I read that simply installing the latest defender version from the microsoft site had fixed this problem for others, so I did that, to find I still received the BSOD's. So in a attempt to find a fix to the problem I went to the microsoft answers site to try to find a way to fix the problem, there I was told to simply disable defender and reboot to see if that fixed the problem, upon doing this my computer would no longer even startup, when I boot normally I get to just when the loading screen finishes and then my computer restarts and when I run startup repair, it runs for about 15 seconds and then my computer restarts as well. I have tried running ubuntu live discs in order to simply access the drive and simply copy and paste the 2 month old physical backup I have of my C drive to the C drive, but whenever I run the live OS when it gets to the end of the load screen and is about to boot, the computer again restarts, yet if I put in a gparted disc, I am able to boot it fully, although it does not give me access to the file system just partition managing and when I attempt to access the internet through it, the computer once again restarts. So my question is, how could the update and what has happened prevent me from running the live OS's properly?

    Read the article

  • It’s that Time of Year Again… OPN Survey Time!

    - by Kristin Rose
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Whether you’re still carving pumpkins or getting ready to carve a turkey, be sure to carve out your chance to win one of 5 Apple i-Pads, by taking our Oracle PartnerNetwork Survey! On October 12th, Oracle Alliances and Channels sent out invitations asking you to complete the Oracle PartnerNetwork Survey and provide feedback on Oracle’s Enablement, Partner Business Center, OPN Portal, Communications, Benefits, OPN Competency Center, Solutions Catalog and Marketing.  So, if you’re feeling as festive as we are, and received an invitation to participate, we hope you take this opportunity to provide us feedback so we can continue to drive meaningful programs and interactions with you, our partners! If you didn’t receive an invitation but still want to get the get the holidays started with your very own i-Pad, you’re welcome to send us a note at [email protected] with your candid feedback, or request to be added to the list for future surveys. The drawing for the Apple i-Pads will take place after the survey closes mid November. Thank you in advance for your participation and we look forward to receiving your response. Let the holiday season begin! The OPN Communications Team

    Read the article

  • How to temporarily save the result of the query, to use in another?

    - by Truth
    I have this problem I think you may help me with. P.S. I'm not sure how to call this, so if anyone finds a more appropriate title, please do edit. Background I'm making this application for searching bus transit lines. Bus lines are a 3 digit number, and is unique and will never change. The requirement is to be able to search for lines from stop A to stop B. The user interface is already successful in hinting the user to only use valid stop names. The requirement is to be able to display if a route has a direct line, and if not, display a 2-line and even 3-line combination. Example: I need to get from point A to point D. The program should show: If there's a direct line A-D. If not, display alternative, 2 line combos, such as A-C, C-D. If there aren't any 2-line combos, search for 3-line combos: A-B, B-C, C-D. Of course, the app should display bus line numbers, as well as when to switch buses. What I have: My database is structured as follows (simplified, actual database includes locations and times and whatnot): +-----------+ | bus_stops | +----+------+ | id | name | +----+------+ +-------------------------------+ | lines_stops_relationship | +-------------+---------+-------+ | bus_line | stop_id | order | +-------------+---------+-------+ Where lines_stops_relationship describe a many-to-many relationship between the bus lines and the stops. Order, signifies the order in which stops appear in a single line. Not all lines go back and forth, and order has meaning (point A with order 2 comes after point B with order 1). The Problem We find out if a line can pass through the route easily enough. Just search for a single line which passes through both points in the correct order. How can I find if there's a 2/3 line combo? I was thinking to search for a line which matches the source stop, and one for the destination stop, and see if I can get a common stop between them, where the user can switch buses. How do I remember that stop? 3 line combo is even trickier, I find a line for the source, and a line for the destination, and then what? Search for a line which has 2 stops I guess, but again, How do I remember the stops? tl;dr How do I remember results from a query to be able to use it again? I'm hoping to achieve this in a single query (for each, a query for 1-line routes, a query for 2, and a query for 3-line combos). Note: I don't mind if someone suggests a completely different approach than what I have, I'm open to any solutions. Will award any assistance with a cookie and an upvote. Thanks in advance!

    Read the article

  • Zelda-style top-down RPG. How to store tile and collision data?

    - by Delerat
    I'm looking to build a Zelda: LTTP style top-down RPG. I've read a lot on the subject and am currently going back and forth on a few solutions. I'm using C#, MonoGame, and Tiled. For my tile maps, these are the choices I can see in front of me: Store each tile as its own array. Each one having 3-4 layers, texture/animation, depth, flags, and maybe collision(depending on how I do it). I've read warning about memory issues going this route, and my biggest map will probably be 160x120 tiles. My average map however will be about 40x30. The number of tiles might cut in half if I decide to double my tile size, which is currently 16x16. This is the most appealing approach for me, as I feel like I would know how to save maps, make changes, and separate it into chunks for collision checks. Store the static parts of my tile map in multiple arrays acting as the different layers. Then I would just use entities for anything that wasn't static. All of the other tile data such as collisions, depth, etc., would be stored in their own layers as well I guess? This way just seems messy to me though. Regardless of which one I choose, I'm also unsure how to plan all of that other tile data. I could write a bunch of code that would know which integer represents what tile and it's data, but if I changed a tileset in Tiled and exported it again, all of those integers could potentially change and I'd have to adjust a whole bunch of code. My other issue is about how I could do collision. I want to at least support angled collision that slides you around the corners of objects like LTTP does, if not more oddball shapes as well. So do I: Store collision as a flag for binary collision. Could I get this to support angles? Would it be fine to store collision as an integer and have each number represent a certain angle of collision? Store a list of rectangles or other shapes and do collision that way? Sorry for the large two-part(three-part?) question. I felt like these needed to be asked together as I believe each choice influences the other.

    Read the article

  • Oracle @Munich Business School

    - by Maria Sandu
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Last Wednesday, Lisa from the Graduate Recruitment team and her colleague Philipp from Sales visited the Munich Business School to talk about IT challenges, Sales and Career Opportunities at Oracle. Although the talk started at 6:30 pm, the audience of about 100 students was still attentive and curious. First they were provided with some facts about Oracle, then Philipp went into detail and took them through current IT challenges like ‘Social’, ‘Mobile’, ‘Information’ and ‘Cloud’ and how Oracle solutions can help facing these challenges. He also demonstrated what kind of prerequisites and qualifications are required to become a successful Sales person. When talking about his own career, the audience got even more anxious to hear what he would tell them. Finally, students asked questions on career opportunities across Europe or on other topics they were interested in. If you’re interested in talking to us in person, connect with us on Facebook to get the latest information about events we’re attending and schools we’re visiting. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • ??????????????????

    - by kazun
    2012 ? 8 ? 9 ???????????? ?? 13F ??????????????????????? DB ???????????????????????????????????????????????????????·????????????·??????????Exadata ?????????? Hybrid Columnar Compression(HCC)?????????????????????????????? (1)?????????????????IT????????????? ?????????????·??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????IT???????????????????ZFS Storage Appliances ????????100Petabytes ??(8 ? 9 ???)? ZFS Storage ?????????????????????????????????????????????????????????????????????? (2)????????????????????????????? ??????????? VTR ???????????????????? EOL(End of Life)????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ?????????7 ??????????? StorageTek SL150 ??????????????????????????450TB(????)?30~300 ????????????????????????? 10.1TB?????????????????????????????????????????????????????????????????????????????? ??:StorageTek SL150(????????????) ?????????????????????????????????????????????????????????? (3)Oracle????????????????????????? ??????(????????)????????????????????????????????????????????????Sun ZFS Storage Appliance?????????????????????????????Sun ZFS Storage Appliance ?Pillar Axiom ???????????????????????????? ?????????Oracle Database?????????????????????????????????????????? Database ????????? Hybrid Columnar Compression / Snapshot?Clone????????????????DB???????? I/O Quality of Services?????????DB??? ????? ???Optimized Solutions????Oracle??????(??????????????????)????????????????????????????????Exadata ?? InfiniBand ?????????????????1?????? ??????????????????????????????????????????????Oracle Database ? Exadata ?????????????????????????? Oracle ?????????????????????? Sun ZFS Storage 7120 Appliance ??????????????????????? ??:Sun ZFS Storage 7120 Appliance (4)?????????Oracle Database ??????????????? “Hybrid Columnar Compression (HCC) ” ????????????? HCC??????????????????????????????????????????????????? I/O ????????????????????????????????????????????Oracle Database ???? HCC ??????????????? ?????:?Oracle ????·???? 2009?12? Exadata Hybrid Columnar Compression? ?????????Sun ZFS Storage Appliance ?Pillar Axiom ?????????4??????HCC??????????????????? HCC ???????? HCC ???????? Exadata ? DataGuard ?????HCC ?????????????????????? Exadata ??????????????·??????????????? DB ??????? HCC ?????? ?????????????????????????HCC ?????????????????????????????????? ?????????? HCC ?????????????????????ZFS Storage Appliance ? Pillar Axiom ?????????????????????? 6 ?????????????????????????????????????? ¦???????? ???????????

    Read the article

  • Windows Server 2008 R2 Server Manager not working -> mmc.exe crashes with System.IO.FileNotFoundException

    - by Aleja_Vigo
    Since some days ago I can't run the Server Manager, it fails like this: Descripción: Stopped working Firma con problemas: Nombre del evento de problema: CLR20r3 Firma del problema 01: mmc.exe Firma del problema 02: 6.1.7600.16385 Firma del problema 03: 4a5bc808 Firma del problema 04: System.Management Firma del problema 05: 2.0.0.0 Firma del problema 06: 4ca2baf0 Firma del problema 07: 32f Firma del problema 08: 12b Firma del problema 09: System.IO.FileNotFoundException Versión del sistema operativo: 6.1.7601.2.1.0.272.7 There are other strange syntoms in the SO: Hyper-V stopped working as well, fails to load any VM information The desktop icons rearrange themselves all the time, and always on boot, after I move them. I use now an app that remembers their position to restore it... Windows Update service dissapeared, along with BITS service, I managed to recover them and installed all updates availables today I'm going nuts looking for information about these errors. Solutions that didn't work: sfc /scannow Doesn't complain about anything All windows updates applied (after recovering missing Windows Update) ServerManager.log: Only one error all the time: Error (Id=0) System.Runtime.InteropServices.COMException (0x800706D9): No hay más extremos disponibles desde el asignador de extremos. (Excepción de HRESULT: 0x800706D9) en Microsoft.Windows.ServerManager.NativeMethods.INetFwPolicy2.IsRuleGroupCurrentlyEnabled(String group) en Microsoft.Windows.ServerManager.DirectResult.GetRemoteManagementEnabled() In english : "There are no more endpoints available from the endpoint mapper" Where could I see which is the infamous file that mmc.exe is looking for in that System.IO.FileNotFoundException?? Please, any light on this would be much appreciated...

    Read the article

  • How to make my SanDisk Cruzer Blade 4GB disk back to normal?

    - by Jack
    Currently, my SanDisk Cruzer Blade 4GB have become a 64MB Firebird RAW flash drive (thumb drive). I don't know why it become like this but when I plug it into a PC, it suddenly transform itself to become a 64MB flash drive. (From 4 GB to 64 MB, that is a huge change!) I read the following articles: http://forums.sandisk.com/t5/All-SanDisk-USB-Flash-Drives/Cruzer-Blade-will-not-format/td-p/214932 http://forums.whirlpool.net.au/archive/1691847 http://forum.hddguru.com/sandiskfirebird-64mb-t23539.html and notice that their solutions does not work at all. Some of their solution is as follows: Using the HP USB Disk Storage Format Tool (http://files.extremeoverclocking.com/file.php?f=1970), which did not work for me as it could not format. Using the h2testw to see if it is genuine, which did not work for me because it is a RAW partition. Return to the vendor, which I doubt since the product only have 1 year warranty and it has expired. I also notice that the flash drive is very fragile as after a few use, the flash drive have become something like the following: (The upper cover of the USB connector was broken or torn) So, wondering if someone have any good solution to fix it back so that at least I can retrieve my data on the fragile thumb drive.

    Read the article

  • Good bug tracking with Sharepoint?

    - by torbengb
    At my place of work, it has been decided to move many processes to Sharepoint. I'm now looking into how Sharepoint can be used for bug tracking (à la Mantis, FogBugz etc. but within Sharepoint). Specifically, we're using a collaboration room and the solution must work inside that. I know that I can create lists using an "Issue tracker" template, but it lacks workflow, integrated correspondence (like FogBugz), and audit log (any user can edit any field any time, without it being noted anywhere). That's not sufficient, so I am looking for "bigger" solutions but haven't yet found anything at all. This question is similar but aims at Helpdesk use; we aim at bug tracking and change requests to a system. I'm open to suggestions! As I'm not an administrator, I can't just grab a Sharepoint component and install it for testing. I'm looking for experiences, documentation, white papers, screen shots -- the actual downloadable will be relevant later. Ideally, some of these matters should be covered: Support for different ticket types (bug, feature, inquiry, internal task). Configurable workflow per ticket type, no fixed number of steps. Configurable read/write permissions per field and per workflow status. Configurable dashboard for managers with nice charts. Configurable email notifications. Correspondence à la FogBugz. (Challenge: we use Notes, not Exchange.)

    Read the article

  • multiple monitor, ATI EyeFinity vs NVidia Mosaic on HDMI

    - by user1531897
    i have been googling much for answer but only someone with real experience can help here. my aim is to have 5 monitors connected to one computer in 2x2 full screen on all 4 monitors (video wall) with same resolution, 4xfullHD for example, plus one -5th monitor as controling. Ati have example picture of this configuration here. I have no gaming nor 3d needs here. Simple desktop applications plus video streams. So because graphic cards for this are expensive, i need to find out before buying pros and cons of 2 possible solutions (1) Ati Eyefinity capable card(s) ...and (2) Nvidia Quadro/NVS card(s) with mosaic and/or nvidia surround technology. For example i can find that current good cards for this can be: Ati's 7870 eyefinity6 card, link here pros: one card can handle all 5 displays, cons: active DP adapters needed (sometimes with aditional usb-powering complication) Nvidia Qudro NVS 450, link here Both cards have DisplayPorts as outputs (my targets are HDMI displays), but as far i saw information is that Eyefinity needs "active DP-DVI/hdmi adapters" for outputs and they are little expensive...? Does nvidia have this limitation (active adapters) ??? And final question, is Ati Eyefinity still better for this purpose than Nvidia-mosaic by someone's real experience there.

    Read the article

  • Task scheduler "hidden" only hides task, not process

    - by Brandi
    I am trying to make an application that acts like a desktop application for all the computers in our network. I have already got a windows forms app that works like I want it to, and I'm using the task scheduler to start it on login. We would really like it if the process as well as the task is hidden from the task manager in order to avoid accidental deletion. Selecting "Hidden" in the task scheduler hides the task (good!) but the process is still visible (not good enough). I tried using the option to run as "SYSTEM" or "LOCAL SERVICE" so that the user would get "access denied" when trying to delete or just wouldn't even view it by default. However, running as a service makes the process invisible on Vista and 7, and the point of my app is to display information interactively. (User can click, sort, etc). Is there any other alternatives to either run the process as someone/something besides the logged in user and still have the logged on user be able to see and interact with it? (Therefore it would list as someone else's app?) From what I've read on the internet, the only ways to actually hide something from the task manager seem hacky and/or difficult and rather involved. I don't really want to write a bunch of C or whatever only to maybe not have it work on Vista/7 anyway. Besides which, for a legitimate app with a legitimate use, I shouldn't have to go to those extremes... I see "Access Denied" all the time for system processes... why is it so hard for me to do the same? So does anyone have any simple solutions? Is it easier than I think to just list something in the task manager as another user? Thanks in advance for any replies.

    Read the article

< Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >