Search Results

Search found 6524 results on 261 pages for 'the ever kid'.

Page 228/261 | < Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >

  • Any reason not to disable the Windows pagefile given enough physical RAM?

    - by Evgeny
    The question of disabling the Windows pagefile has already been discussed quite a bit, for example here and here and here. People continue to upvote answers that say "you should not disable your pagefile even if you have plenty of RAM", but I have yet to see any concrete, verifiable reasons being given for this advice. As far as I can see, if you never need to read from the pagefile (because you have enough RAM) then performance could only be worse with it enabled due to Windows pre-emptively writing to it. At best, performance would be the same. I can't see how it could possibly be improved by writing data you never need to read. So my question is: Assuming that I have enough physical RAM for everything I do, is there any reason I should not disable the pagefile? Let's say the version of Windows is Windows XP x64 SP2 or Windows Server 2003 x64 SP2 (same thing). If it's different for Windows Server 2008 x64 I'd be interested to hear an answer for that as well. I'm looking for specific, objective reasons from good sources, not just opinions. Something like "here are the benchmarks done with and without a pagefile and the results were better with a pagefile, even with enough RAM" or "according to this MS KB article problem X occurs if you disable the pagefile". So far the only reasons I've seen mentioned are: Even if you think you have enough RAM you might run out. OK, but for the purposes of this question, let's just take it as a given that I have enough. Maybe I only ever read my email and I have 16GB RAM. Or 128GB. Or 1TB. Or whatever - but it's enough for 100% of what I do, 100% of the time. Another way to think of it is: if I have x MB physical RAM and y MB pagefile and I never run out of RAM in that configuration, would I not be better off, performance-wise, with x+y MB physical RAM and no pagefile? Windows is "used to" having a paging file and it might not function as reliably (from Understanding the Impact of RAM on Overall System Performance That's rather vague and I find it hard to believe, given that MS has provided the option to disable the pagefile. Windows knows what it's doing better than you. No - it doesn't know that I won't run more programs or load more data, but I do.

    Read the article

  • Understanding packet flows over RVI

    - by choco-loo
    I'm trying to get a full grasp of firewall filters and how to apply them on a Juniper EX4200 switch - to be able to block ports, police traffic and shape traffic. The network architecture is as follows internet >-< vlan4000 >-< vlan43 vlan4000 is a public "routed" block (where all the IPs are routed to and the internet gw is) vlan43 is a vlan with public IPs with devices (servers) attached There are static routes and RVI's on the EX4200 to send all traffic via vlan4000's gateway to reach the internet. I've set up filters on both input and output of the respective RVI's and VLAN's - with simple counters, to measure traffic flow from a server inside of vlan43 and a server on the internet. Using a combination of iperf for UDP and TCP tests and fping for ICMP tests - I observed the following, icmp vlan43>internet internet>vlan43 unit4000-counter-in 0 0 unit4000-counter-out 0 0 unit43-counter-in 100 100 unit43-counter-out 0 0 vlan4000-counter-in 6 4 vlan4000-counter-out 107 104 vlan43-counter-in 101 100 vlan43-counter-out 100 100 tcp vlan43>internet internet>vlan43 unit4000-counter-in 0 0 unit4000-counter-out 0 0 unit43-counter-in 73535 38480 unit43-counter-out 0 0 vlan4000-counter-in 7 8 vlan4000-counter-out 73543 38489 vlan43-counter-in 73535 38481 vlan43-counter-out 38938 75880 udp vlan43>internet internet>vlan43 unit4000-counter-in 0 0 unit4000-counter-out 0 0 unit43-counter-in 81410 1 unit43-counter-out 0 0 vlan4000-counter-in 18 7 vlan4000-counter-out 81429 8 vlan43-counter-in 81411 1 vlan43-counter-out 1 85472 My key goals are to set up a few filters and policers, as there will be many more VLANs - that all need protecting from each other and the internet. Then globally limit/police all outbound traffic to the internet Block inbound ports to vlan43 (eg. 22) Limit outbound traffic from vlan43 (to the internet) Limit outbound traffic from vlan43 (to other vlans) Limit outbound traffic from vlan4000 (to the internet from all vlans) Route traffic from vlans via specific routing instances (FBF) The question What I want to understand is why there isn't ever any activity on unit4000 or vlan4000 inbound or outbound counter - is this because there isn't a device on this VLAN - and that the traffic is only traversing it? And with regards to the TCP test - why is there twice as many packets on unit43-counter-in, vlan4000-counter-out and vlan43-counter-in - is this counting both the inbound and outbound traffic?

    Read the article

  • 64-bit linux kernel only seeing 3 of 4GB after upgrade...

    - by Blaine
    Hey everyone. I am running Ubuntu 9.04 64-bit on my macbook. I had 2GB of ram before, and everything ran great. I just upgraded to 2x2GB (4GB), but my system only sees 3GB of it. OS X, which I am dual booting, sees all 4GB. Also, my video performance is incredibly lacking. Before the upgrade my compiz benchmark was full at 80fps, and now it is at 22fps with very choppy window dragging. Has anyone ever heard of this on a 64-bit kernel? I just don't quite understand what could be the issue. 10$ uname -a Linux macbook 2.6.28-15-generic #49-Ubuntu SMP Tue Aug 18 19:25:34 UTC 2009 x86_64 GNU/Linux $ free -m total used free shared buffers cached Mem: 2953 1031 1921 0 114 427 -/+ buffers/cache: 489 2463 Swap: 7812 0 7812 9$ lsmod Module Size Used by i915 77960 2 drm 123232 3 i915 binfmt_misc 18572 1 ppdev 16904 0 btusb 21784 2 bridge 63776 0 stp 11140 1 bridge bnep 22912 2 vboxnetadp 109356 0 vboxnetflt 116972 0 vboxdrv 1721612 1 vboxnetflt uvcvideo 69640 0 compat_ioctl32 18304 1 uvcvideo videodev 45184 2 uvcvideo,compat_ioctl32 v4l1_compat 23940 2 uvcvideo,videodev lp 19588 0 parport 49584 2 ppdev,lp snd_hda_intel 557492 3 snd_pcm_oss 52352 0 snd_mixer_oss 24960 1 snd_pcm_oss snd_pcm 99464 2 snd_hda_intel,snd_pcm_oss arc4 10240 2 snd_seq_dummy 11524 0 ecb 11392 2 snd_seq_oss 41984 0 snd_seq_midi 15744 0 snd_rawmidi 33920 1 snd_seq_midi snd_seq_midi_event 16512 2 snd_seq_oss,snd_seq_midi snd_seq 66272 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event ath9k 310584 0 snd_timer 34064 2 snd_pcm,snd_seq snd_seq_device 16276 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq mac80211 251528 1 ath9k iTCO_wdt 21712 0 iTCO_vendor_support 12420 1 iTCO_wdt joydev 20992 0 video 29204 0 snd 78920 15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device applesmc 37700 0 output 11648 1 video soundcore 16800 1 snd pcspkr 11136 0 cfg80211 43680 1 mac80211 appletouch 19972 0 isight_firmware 11520 0 input_polldev 12688 1 applesmc intel_agp 39408 1 snd_page_alloc 18704 2 snd_hda_intel,snd_pcm led_class 13064 2 ath9k,applesmc hid_apple 15872 0 usbhid 47040 0 ohci1394 42164 0 ieee1394 108288 1 ohci1394 sky2 63364 0 fbcon 49792 0 tileblit 11264 1 fbcon font 17024 1 fbcon bitblit 14464 1 fbcon softcursor 10368 1 bitblit Some information from dmesg: [ 795.820163] ACPI: EC: GPE storm detected, transactions will use polling mode [ 1762.709516] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 1763.078130] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 2362.760889] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 2416.352084] ACPI: EC: missing confirmations, switch off interrupt mode. [ 3718.721095] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 3719.108914] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 4318.773266] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 9513.813066] CE: hpet increasing min_delta_ns to 15000 nsec [ 9693.815684] npviewer.bin[6736]

    Read the article

  • Intermittently, IIS7 requests get stuck in WindowsAuthenticationModule

    - by Richard Beier
    We're running an IIS7 server hosting several dozen websites. Several of these websites are all part of the same legacy app we've developed. These sites all run the same code and run in the same app pool. Roughly once a month over the past few months, we've found that all requests for this app pool start hanging indefinitely. When this happens, we receive an alert and we recycle the app pool. After that, the sites start working again. This only ever affects this one app pool - never any others on the same server. A couple times, before recycling the pool, I've looked at the currently-executing requests in the worker process. They all show up as executing inside the WindowsAuthenticationModule. Which is strange, because the vast majority of the application does not require authentication. There is a small admin section which uses Windows auth... but all the other requests should be anonymous. Does anyone have any idea as to what might be causing this? There are several unusual things about the way these sites are set up. As I mentioned, they all run the same code - multiple sites point at the same physical directory. The only difference is the host header bindings. I'm not sure why there isn't just one site with all the host headers, but that's how it works. In several of these sites, the same physical directory is mapped at two levels - as the root of the site and again as an application within the site. So if a user goes to http://oursite.com/index.aspx, that maps to c:\files\oursite\index.aspx. If a user goes to http://oursite.com/foo/index.aspx, that also maps to c:\files\oursite\index.aspx. I think there is code which looks at the request URL and handles the two requests differently. This is strange because the same web.config ends up being interpreted as a site config file, and also as an application config file within the site. I don't know if this might be related to the authentication problem. If we can't find the cause, we're thinking of a few workarounds we could try: Move the admin section into a separate site, and give the client a new admin URL. Run that separate site in its own app pool. Then in the web.config shared by all the other sites, remove the WindowsAuthenticationModule. That way there should be no possibility of a hang within the WindowsAuthenticationModule. Try running all these sites in the classic pipeline instead of the integrated pipeline. They were working fine on our old IIS6 server... (If we get desperate) Set up a watchdog script which monitors the sites and auto-recycles the app pool when it detects that requests are getting stuck. What do you think? Thanks for your help, Richard

    Read the article

  • Netcat file transfer problem

    - by thepurplepixel
    I have two custom scripts I just wrote to facilitate transferring files between my VPS and my home server. They are both written in bash (short & sweet): To send: #!/bin/bash SENDFILE=$1 PORT=$2 HOST='<my house>' HOSTIP=`host $HOST | grep "has address" | cut --delimiter=" " -f 4` echo Transferring file \"$SENDFILE\" to $HOST \($HOSTIP\). tar -c "$SENDFILE" | pv -c -N tar -i 0.5 | lzma -z -c -6 | pv -c -N lzma -i 0.5 | nc -q 1 $HOSTIP $PORT echo Done. To receive: #!/bin/bash SERVER='<myserver>' SERVERIP=`host $SERVER | grep "has address" | cut --delimiter=" " -f 4` PORT=$1 echo Receiving file from $SERVER \($SERVERIP\) on port $PORT. nc -l $PORT | pv -c -N netcat -i 0.5 | lzma -d -c | pv -c -N lzma -i 0.5 | tar -xf - echo Done. The problem is that, for a very quick second, I see something flash along the lines of "Connection Refused" (before pv overwrites it), and no file is ever transferred. The port is forwarded through my router, and nmap confirms it: ~$ sudo nmap -sU -PN -p55515 -v <my house> Starting Nmap 5.00 ( http://nmap.org ) at 2010-04-21 18:10 EDT NSE: Loaded 0 scripts for scanning. Initiating Parallel DNS resolution of 1 host. at 18:10 Completed Parallel DNS resolution of 1 host. at 18:10, 0.00s elapsed Initiating UDP Scan at 18:10 Scanning 74.13.25.94 [1 port] Completed UDP Scan at 18:10, 2.02s elapsed (1 total ports) Host 74.13.25.94 is up. Interesting ports on 74.13.25.94: PORT STATE SERVICE 55515/udp open|filtered unknown Read data files from: /usr/share/nmap Nmap done: 1 IP address (1 host up) scanned in 2.08 seconds Raw packets sent: 2 (56B) | Rcvd: 5 (260B) Also, running netcat normally doesn't work either: squircle@summit:~$ netcat <my house> 55515 <my house> [<my IP>] 55515 (?) : Connection refused Both boxes are Ubuntu Karmic (9.10). The receiver has no firewall, and outbound traffic on that port is allowed on the sender. I have no idea what to troubleshoot next. Any ideas? P.S.: Feel free to move this to SO/SF if you feel it would fit better there.

    Read the article

  • server 2008 r2 - wbadmin systemstatebackup - system writer not found in the backup

    - by TWood
    I am trying to manually run a systemstatebackup command on my server 2008 r2 box and I am getting an error code '2155347997' when I view the backup event log details. The command line tells me that I have log files written to the c:\windows\logs\windowsserverbackup\ path but I have no files of the .log type there. My command window tells me "System Writer is not found in the backup". However when I run vssadmin list writers I find System Writer in the list and it shows normal status with no last errors stored. I am running this from an elevated command prompt as well as from a logged on administrator account. My backup target path has permission for network service to have full control and it has plenty of free space. Looking in eventlog I have two VSS error 8194 that happen immediately before the Backup error 517 which has the errorcode 2155347997 listed. All three of these errors are a result of trying to run the command for the systemstatebackup. It's my belief that some VSS related permission is failing and exiting the backup process before it ever gets started. Because of this the initial code that creates the log files must not be running and this is why I have no files. When running the systemstatebackup command from the command prompt and watching the windowsserverbackup directory I do see that I have a Wbadmin.0.etl file which gets created but it is deleted when the backup errors out and stops. I have looked online and there are numerous opinions as to the cause of this error. These are the things I have corrected to try and fix this issue before posting here: Machine runs a HP 1410i smart array controller but at one time also used a LSI scsi card. Used networkadminkb.com's kb# a467 to find one LSI_SCSI entry in HKLMSysCurrentControlSetServices which start was set to 0x0 and I modified to 0x3. No changes. In HKLMSystemCurrentControlSetServicesVSSDiag I gave network service full control where it previously only had "Special Permission". No changes. I followed KB2009272 to manually try to fix system writer. These are all of the things I have tried. What else should I look at to resolve this issue? It may be important to note that I run Mozy Pro on this server and that was known in the past to use VSS for copying operations and it occasionally threw an error. However since an update last year those error event log entries have stopped.

    Read the article

  • Sendmail Tuning For Batch Mail Jobs

    - by Kyle Brandt
    I have a webservers that send out emails to a sendmail relay server as a batch job. The emails need to be accepted by the relay sendmail server as fast as possible, however, they do not need to go out (be relayed) very quickly. I am seeing a couple timeouts once and a while from the webserver trying to connect to the relay server. The load currently is about 30 emails a second for a couple minutes. There are quite a few tuning options for sendmail in the sendmail tuning guide. What I am focusing on now is the Delivery Mode: Delivery Mode There are a number of delivery modes that sendmail can operate in, set by the DeliveryMode ( d) configuration option. These modes specify how quickly mail will be delivered. Legal modes are: i deliver interactively (synchronously) b deliver in background (asynchronously) q queue only (don't deliver) d defer delivery attempts (don't deliver) There are tradeoffs. Mode i gives the sender the quickest feedback, but may slow down some mailers and is hardly ever necessary. Mode b delivers promptly but can cause large numbers of processes if you have a mailer that takes a long time to deliver a message. Mode q minimizes the load on your machine, but means that delivery may be delayed for up to the queue interval. Mode d is identical to mode q except that it also prevents lookups in maps including the -D flag from working during the initial queue phase; it is intended for ``dial on demand'' sites where DNS lookups might cost real money. Some simple error messages (e.g., host unknown during the SMTP protocol) will be delayed using this mode. Mode b is the usual default. If you run in mode q (queue only), d (defer), or b (deliver in background) sendmail will not expand aliases and follow .forward files upon initial receipt of the mail. This speeds up the response to RCPT commands. Mode i should not be used by the SMTP server. I currently have the CentOS default modes: Sendmail.cf: DeliveryMode=background Submit.cf: DeliveryMode=i Is sendmail.cf/mc for outgoing email from relay (to the intertubes) and sumbit.cf/mc for incoming eamil (from my webservers). Would it make sense to change the outgoing delivery mode to queue? If I did, what would the outbound email flow behave like? If this is the right thing to do, can anyone show me example mc configurations for this change? If it isn't, what recommendations are there for these constraints?

    Read the article

  • what is Remote Desktop Services in Windows Server 2008 R2 all about?

    - by fejesjoco
    Seriously, I'm lost in all that sales mumbo-jumbo. Let's say I want 1 or 2 users to be able to remotely log on to a server, run Word, Visual Studio, Firefox, and whatever. Do I gain anything at all if I install Remote Desktop Services? Or do I just install Desktop Experience feature pack, enable remote desktop and voila, nobody will ever notice the difference? Here's what TechNet says about Remote Desktop Session Host: A Remote Desktop Session Host (RD Session Host) server is the server that hosts Windows-based programs or the full Windows desktop for Remote Desktop Services clients. Users can connect to an RD Session Host server to run programs, to save files, and to use network resources on that server. Users can access an RD Session Host server by using Remote Desktop Connection or by using RemoteApp. The good old simple remote desktop can also host a full Windows desktop for remote clients so that they can run programs, save files and do all that stuff. Why do they write about it like it's such a great new invention, besides that they want to sell it? RDSH doesn't seem all that different at all. What do I install when I install RDSH, since all those features are already there in Windows? What's even more confusing is that you need to take special care when you want to install applications to an RDSH so that they will be usable by many concurrent users. Why? All the modern applications install the program files in one directory, store some common settings in the ProgramData folder and the HKLM hive, and store user specific settings in the Users folder and the HKCU hive. They are designed to be usable by many users on the same machine. 2 or 2000 users can use them concurrently without any efforts. I can sign in with 2 users to a server with only remote desktop enabled, and both of us can run Word or anything without any problems, can't we? So what changes if I set RDSH to install mode, or what happens if I don't? Why is the feature to switch between install and execute mode there at all? Yes I know of some advantages in Remote Desktop Services, like there's no 2 user limit, it supports virtualization, video acceleration and stuff, it has a whole infrastructure with gateway, web access, connection broker, etc. But I don't need those, so if you take these away, how are these two technologies different? From the articles it seems like they are completely different technologies, whereas it looks to me that they are completely the same at the core, and Remote Desktop Services just adds some additional features, but doesn't reinvent anything.

    Read the article

  • SMB returns the entire file instead of header info

    - by billdlawson
    Starting a section of code checks for access to many data files (flat files so each table is a file) and when I do a packet capture, in our capture only the header info is sent by the server to the client. However I have one Customer who is using a SAN that gets the whole file instead of just the header info,and besides just being slower, this is causing file access issues. They have already turned off OPLOCKS at the server and at the workstations. This is not client server. The data files and the application reside on the server but the users run the application locally via a shortcut with a mapped drive or UNC. So when I simply select an option that prompts for a vehicle number, not tryng to select a record but rather simply verify the datafiles are accessible, that window opens in 1-2 seconds for me. When they do the same thing it takes 6-15 seconds after there several users are running the program. Maximum number of users is 15. The program has a lot of small modules, 800 .cob modules. So it is very chatty but these are datafiles. We have Wireshark captures that show he's pulling the whole file and we're just getting the header. Thier capture vs ours. We suspect the SAN. Has anyone ever heard of a SAN improperly interpreting runtime requests? So an SMB request. This is Acucobol-GT (now Microfocus). The application is written in COBOL. This is not a new program just a new problem. This is one customer of over a thousand who are otherwise running smoothly and we are totally stumped. All XP users, the server is Windows 2003 (with Virtual server) and I don't yet know the SAN info. Also we have many installations running virtual servers but only few on SANs or we just don't know it. This is not a network throught put issue, the load is less than 5% on the server and theer are no timeout or retransmits. PS If it wasn't for Wireshark I'd still be chasing my tail. An application trace file on thier installation just looks like they run slower. If you want the Wireshark trace file I can make it available. Thanks in advance - Please excuse my verbosity (word?) but I'm not sure what's relavent.

    Read the article

  • PPTP VPN Not Working - Peer failed CHAP authentication, PTY read or GRE write failed

    - by armani
    Brand-new install of CentOS 6.3. Followed this guide: http://www.members.optushome.com.au/~wskwok/poptop_ads_howto_1.htm And I got PPTPd running [v1.3.4]. I got the VPN to authenticate users against our Active Directory using winbind, smb, etc. All my tests to see if I'm still authenticated to the AD server pass ["kinit -V [email protected]", "smbclient", "wbinfo -t"]. VPN users were able to connect for like . . . an hour. I tried connecting from my Android phone using domain credentials and saw that I got an IP allocated for internal VPN users [which I've since changed the range, but even setting it back to the initial doesn't work]. Ever since then, no matter what settings I try, I pretty much consistently get this in my /var/log/messages [and the VPN client fails]: [root@vpn2 ~]# tail /var/log/messages Aug 31 15:57:22 vpn2 pppd[18386]: pppd 2.4.5 started by root, uid 0 Aug 31 15:57:22 vpn2 pppd[18386]: Using interface ppp0 Aug 31 15:57:22 vpn2 pppd[18386]: Connect: ppp0 <--> /dev/pts/1 Aug 31 15:57:22 vpn2 pptpd[18385]: GRE: Bad checksum from pppd. Aug 31 15:57:24 vpn2 pppd[18386]: Peer armaniadm failed CHAP authentication Aug 31 15:57:24 vpn2 pppd[18386]: Connection terminated. Aug 31 15:57:24 vpn2 pppd[18386]: Exit. Aug 31 15:57:24 vpn2 pptpd[18385]: GRE: read(fd=6,buffer=8059660,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Aug 31 15:57:24 vpn2 pptpd[18385]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Aug 31 15:57:24 vpn2 pptpd[18385]: CTRL: Client 208.54.86.242 control connection finished Now before you go blaming the firewall [all other forum posts I find seem to go there], this VPN server is on our DMZ network. We're using a Juniper SSG-5 Gateway, and I've assigned a WAN IP to the VPN box itself, zoned into the DMZ zone. Then, I have full "Any IP / Any Protocol" open traffic rules between DMZ<--Untrust Zone, and DMZ<--Trust Zone. I'll limit this later to just the authenticating traffic it needs, but for now I think we can rule out the firewall blocking anything. Here's my /etc/pptpd.conf [omitting comments]: option /etc/ppp/options.pptpd logwtmp localip [EXTERNAL_IP_ADDRESS] remoteip [ANOTHER_EXTERNAL_IP_ADDRESS, AND HAVE TRIED AN ARBITRARY GROUP LIKE 5.5.0.0-100] Here's my /etc/ppp/options.pptpd.conf [omitting comments]: name pptpd refuse-pap refuse-chap refuse-mschap require-mschap-v2 require-mppe-128 ms-dns 192.168.200.42 # This is our internal domain controller ms-wins 192.168.200.42 proxyarp lock nobsdcomp novj novjccomp nologfd auth nodefaultroute plugin winbind.so ntlm_auth-helper "/usr/bin/ntlm_auth --helper-protocol=ntlm-server-1" Any help is GREATLY appreciated. I can give you any more info you need to know, and it's a new test server, so I can perform any tests/reboots required to get it up and going. Thanks a ton.

    Read the article

  • PCI-DSS compliance for business with only swipe terminals [migrated]

    - by rowatt
    I support the IT infrastructure for a small retail business which is now required to undergo a PCI-DSS assessment. The payment service and terminal provider (Streamline) has asked that we use Trustwave to do the PCI-DSS certification. The problem I face is that if I answer all questions and follow Trustwave's requirements to the letter, we will have to invest significantly in networking equipment to segment LANs and /or do internal vulnerability scanning, while at the same time Streamline assures me that the terminals we have (Verifone VX670-B and MagIC3 X-8) are secure, don't store any credit card information and are PCI-DSS compliant so by implication we don't need to take any action to ensure their network security. I'm looking for any suggestions as to how we can most easily meet the networking requirements for PCI-DSS. Some background on our current network setup: single wired LAN, also with WiFi turned on (though if this creates any PCI-DSS complexities we can turn it off). single Netgear ADSL router. This is the only firewall we have in place, and the firewall is out the box configuration (i.e. no DMZ, SNMP etc). Passwords have been changed though :-) a few windows PCs and 2 windows based tills, none of which ever see any credit card information at all. two swipe terminals. Until a few months ago (before we were told we had to be PCI-DSS certified) these terminals did auth/capture over the phone. Streamline suggested we moved to their IP Broadband service, which instead uses an SSL encrypted channel over the internet to do auth/capture, so we now use that service. We don't do any ecommerce or receive payments over the internet. All transactions are either cardholder present, or MOTO with details given over phone and typed direct into terminal. We're based in the UK. As I currently understand it we have three options in order to get PCI-DSS certification. segment our network so the POS terminals are isolated from all PCs, and set up internal vulnerability scanning on that network. don't segment the network, and have to do more internal scanning and have more onerous management of PCs than I think we need (for example, though the tills are Windows based, they are fully managed so I have no control over software update policies, anti virus etc). All PCs have anti virus (MSE) and windows updates automatically applied, but we don't have any centralised go back to auth/capture over phone lines. I can't imagine we are the first merchant to be in this situation. I'm looking for any recommendations a simple, cost effective way to be PCI-DSS compliant - either by doing 1 or 2 above with (hopefully) simple and inexpensive equipment/software, or any other ways if there's a better way to do this. Or... should we just go back to the digital stone age and do auth/capture over the phone, which means we don't need to do anything on our network to be PCI-DSS certified?

    Read the article

  • Lag spikes at full CPU usage, maybe video card

    - by Roberts
    I am posting this thread in hurry so few things may be missed (I will update tomorrow). My PC specs: Motherboard Name - Gigabyte GA-945PL-S3 CPU Type - DualCore Intel Core 2 Duo E4300, 1800 MHz (9 x 200) OS - Microsoft Windows 7 Ultimate OS Kernel Type - 32-bit OS Version - 6.1.7601 I bougth a new video card one month ago. GeForce 210. I didn't have any problems. I wanted to overclock it, in other words: "Play with it". So I installed Gigabyte EasyBoost from CD and overclocked the GPU 590 + 110 mhz, memory to max to 960mhz from 800mhz. Benchmarks showed a little bit bigger score. Then I overclocked shader clock from 1405 to [..] (don't remeber really). So I was playing Modern Warfare 2 when off sudden computer froze when I wanted to select team, I was afk before that. I had to reset CMOS. After that I had problems with Skype: unread messages and no sound. Then I figured it out that when ever I open EasyBoost - Skype starts to glitch again. Now I use EVGA Precission X. Now after a month, I cleaned computer and closed the case, it was open all the time. I started to overclock GPU clock only (just a bit) because there was no problems that would stop me. So sometimes on heavy CPU load graphics starts to lag. Dragging a window is painful to watch too. Sometimes the screen freezes for 5 to 10 seconds (I can see that hard disk activity is maximal). You may say that CPU fault it is, isn't it? But sometimes lag spikes starts randomly when CPU load is at maximum. All 3 benchmark softwares (PerformanceTest, NovaBench and MSI Kombustor) shows that performance of my video card has dropped about 25%. BUT! CPU score is lower too. I ignored these problems but when I refreshed Windows Experience Index I was shocked. Month before (in latvian language but not so hard to understand): Now (upgraded RAM): This happened when I tried to capture Minecraft with Fraps on underclocked GPU to 580mhz (def: 590mhz): All drivers are up to date. Average CPU temperature from 55°C to 75°C (at 70°C sometimes starts these lag spikes). Video card's tempratures are from 45°C to 60°C (very hard to reach 60°C). So my hope is that the video card is fine, cause this card is very new and I want to upgrade CPU anyways. Aplogies for my mistakes in vocabulary (I am trying to type this as fast I can).

    Read the article

  • What is it that kills laptop batteries?

    - by Mala
    There are many superstitions on what you must never do lest your battery become worthless - and by worthless I mean hold about 16 - 24 seconds of charge. This has happened to every laptop I have ever owned, and I just got a new one, so please help me sort out fact from fiction. Here are some of the things I've heard: Do not keep your laptop fully charged. You must run it completely down every so often. Do not use your laptop plugged in to the wall. Only plug it in when it needs charge. If you will not be using your laptop for a long period of time, don't leave it at full charge. Do not leave your laptop running 24/7. The first two I know to be complete fiction: this was true of old batteries such as you might have had in an iPod in 2003, but modern batteries function better when kept at or near full charge. Devices even have circuitry to prevent you from completely depleting your battery, as this is dangerous. The third point sounds probable, and I'd be interested to know if it was true. However, it doesn't really apply to me because I'm not really the type to leave my laptop alone for a day, much less a "long period of time" The fourth seems most likely of the above, but only because of causality: I have always done this, and my batteries have always crapped out on me. I've generally treated a laptop like a desktop with a battery backup, and that I can move from one room to another if necessary. The fact that my batteries tend to last less than 30 seconds has further entrenched this behavior. Should I be trying to break this habit? Are there any other things that ruin laptop batteries? I love that I can actually use my new laptop unplugged :) I'd like to keep it that way. Update: Additional question: If the computer will be used for an extended period of time plugged in, does it make sense to remove the battery first? Update 2: I know people with laptops older than mine, who actively use their laptops as much as I do, and their batteries still hold about an hours' charge while mine holds less than 30 seconds, hence my belief that something I'm doing kills them.

    Read the article

  • Windows 7, weird/annoying explorer problem

    - by Shiki
    First of all, I'm asking the moderators if you could summarize my problem in the Title and modify it according to that. Thanks in advance and sorry, my english is not that good. The problem. It happened on two of my machines already. Once it happens there are many problems with explorer. I'll try to describe at precisely I just can. So. Basically when you create a new folder, you have to hit the enter key TWICE because first it'll throw an error that "there is no such file..". Okay. Then if you try to delete some, this happens also. Renaming is the same. Here is an example. I tried adding a "2" to the end of the folder name, hit enter and got this. Here I can press cancel, nothing happens. If I press retry, the popup disappears and it'll finally change the folder name. I can't come up with anything for this. Using BitDefender (registered, full protection), Windows 7 x86 Ultimate retail (boxed, english version). The other PC had the same anti-virus protection , but it have a Windows 7 x64. Both systems are activated, updated totally. I don't remember installing any new stuff on the PCs. All the stuff on the PCs are legal, no cracked / any other software present. It just happened, so to say. Already reinstalled the other PC because I thought * I * messed up something and its just something FUBAR. However, I dont want to reinstall my laptop also. Any ideas are welcome. (Today I had a strange bug. Windows Explorer had 1.0+gb memory usage with 100% cpu. Killed it, launched a new explorer.exe and thats all. Nothing changed, but it may worth a try. The other PC did NOT have this problem, ever.) Isn't there a registry fix for this or something? :/

    Read the article

  • Dangers of Running Computers w/o Air Conditioning

    - by Daniel Bingham
    I recently moved in to an apartment with out air conditioning. This is fine most of the time as I am in upstate New York. It only ever gets above the high 70s during the hottest of the summer months. And when it does, I'm stubborn enough that I'll just deal with wearing minimal clothing around the house. However, I'm worried about my computers. I'm a software developer and gamer, so many of my machines are very high powered. And at least one of them is a server that must be left on 24/7 (not just a game server - also serves multiple websites). I've never before had to worry about the heat too much, as I always lived in buildings with central air. The in building temperature rarely got much above 70 F. All of the machines I built had good enough air cooling that I never saw a problem. Now the temperature in building is pushing 100F and I'm worried that the machines will not be able to keep themselves cool enough by simply blowing already hot air over themselves. The hottest of them I've turned off. However, the server I cannot. It's an old Dell (not custom build) that runs on a Pentium 4 (2.2GHz). It only has a single hard drive, integrated video. And it'd not running any processor intensive servers. Just basic LAMP. It used to run a MUD server, but that's off for now. So it should be idling most of the time. I haven't been able to find any sort of built in temperature sensors in the hardware... at least not any that the programs I've found in the Debian repository can read. And it's an inherited machine to which I do not have the full specs, so I don't know the tolerances anyway. How worried should I be about it melting down on me? How worried should I be about the hard drive melting or becoming corrupted? To generalize the question for other people, what are the safe temperature tolerances for most machines. How widely does it vary, and how does one go about determining when their machine is running too hot and needs to be shut down?

    Read the article

  • Windows startup Powershell script not closing after Start-Process

    - by Matthew Phipps
    I've got a Powershell V2.0 startup script for my work computer (XP Professional 64-bit), as follows: start "C:\Program Files (x86)\Microsoft Office\Office12\OUTLOOK.EXE" -ArgumentList "/recycle" sleep -S 2 start "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -ArgumentList "https://mail.google.com" sleep -S 2 start "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -ArgumentList "-new-window https://www.google.com/calendar" sleep -S 2 start "C:\Program Files (x86)\Skype\Phone\Skype.exe" The sleeps are to ensure that the windows appear on the taskbar in the correct order. I run this from a shortcut on my Quick Launch with the following Target: C:\WINDOWS\system32\WindowsPowerShell\v1.0\powershell.exe C:\scripts\initialize.ps1 (Yes, this is 2.0: powershell -Version 2.0 works, as does -Version 1.0, but not -Version 3.0) Problem is, the command window stays open until the Firefox windows are closed, which is not what I want. Looking at Process Explorer when I run the script, here's what happens: powershell.exe appears under explorer.exe and the Powershell window appears (with a black background, oddly. But it's not cmd.exe, since when I was debugging the script error messages would appear in red). outlook.exe appears under powershell.exe and the Outlook window appears. firefox.exe appears under powershell.exe and a Firefox window appears. A second firefox.exe appears under powershell.exe and another Firefox window appears. The second Firefox process then exits, as expected, since Firefox only uses one process. skype.exe appears under powershell.exe and the Skype window appears. The powershell.exe process inexplicably sticks around, as does the Powershell window. If I close both Firefox windows, the powershell.exe process exits and the Powershell window closes, and the outlook.exe and skype.exe processes appear under explorer.exe as expected. I suspect this has something to do with Firefox's standard input, output and error: I wouldn't expect Outlook or Skype to ever output anything to the console, but Firefox has command-line options that allow it to do so. I've looked over my about:config's user set values and didn't find anything suspicious. Finally, if I have a firefox.exe instance already running (started from the desktop shortcut) the problem doesn't occur (the powershell.exe process exits as it ought to). So what's going on here? I'm going to try adding -WindowStyle hidden to the shortcut next (gotta close this Firefox to test it), but I want to get to the bottom of this, if only to improve my understanding of how Windows consoles work.

    Read the article

  • High load on X3220 Quad Core Linux Apache server

    - by John Templar
    I'm seriously in need of help. My sites are now nearly impossible to use because of massive loads on my server. I'm already a month late on my mortgage and this really isn't helping my situation. I've been working on fixing this intermittent load problem for months (never this bad). I'm suspecting some kind of attack since I'm under DDOS attack a lot! I've been trying to figure out what is causing the load but I'm afraid I just don't have the experience or knowledge to understand all the data I've been looking at. I don't even know where to begin or how to test for the large array of attacks out there. Here's some data you might find useful... Server: Xeon X3220 Quad Core 2.4 GHz - Linux, FreeBSD 500 GB HD and 8 Gig of Ram. Runs Centos release 5.7 Server Version: Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 mod_qos/9.74 Warning: All sites are softcore adult sites - mostly fantasy art like elves and amazons. 1) Sites may run fine for weeks or just days at less than 10 load then start jumping to 40-80 load - no idea why. Same sites, same mods, same amount of traffic - just WHAM! 2) I get an email almost every day that says: "Large Number of Failed Login Attempts from IP (different each time)". My webhost (who almost never helps me) told me it was a udp flood or something. 3) I've changed the port for MySQL from the default. If I ever put it back to the default - I get Loads of over 100 from what must be a constant mysql port flood. 4) I've reconfigured MYSQL. Link: http://www.deadlyamazons.com/logs/mycnf.txt 5) I have 3 Joomla Jomsocial networks. I've spent a couple weeks turning all the mods/plugins off, waiting a day and then turning them back on the next day or later if there isn't any change (there hasn't been). For example, on Thursday I'll turn off videos, on Friday I'll turn off chat.. etc and nothing changes the load appreciably. 6) Joomla info: All SEF turned off - sh404sef completely disabled and removed. Components: Joomla 1.5.22, Jomsocial 2.0.5, Kunena 1/31/2011, HWDMediashare 11/22/2010 and JBolo Chat 2.7.3, Comet Chat or Envolve Chat. Page Compression is on, Cache is on 15 mins. Please click on this forum to see links to all my reports: http://forum.joomla.org/viewtopic.php?f=433&t=706035&p=2777500#p2777500 Any help would be highly appreciated.

    Read the article

  • Can't save screen resolution setting.

    - by Searock
    Hi, My screen resolution in windows and previous version of Ubuntu (9.04) was 1152 x 864. But in Ubuntu 10.04 it gives me an option of 1024 x 786 and 1360 x 786. I have some how managed to add 1152x684 resolution by using xrandr command. searock@searock-desktop:~$ cvt 1152 864 1152x864 59.96 Hz (CVT 1.00M3) hsync: 53.78 kHz; pclk: 81.75 MHz Modeline "1152x864_60.00" 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync searock@searock-desktop:~$ xrandr --newmode "1152x864_60.00" 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync searock@searock-desktop:~$ xrandr --addmode S-video 1152x864 xrandr: cannot find output "S-video" searock@searock-desktop:~$ xrandr Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1360x768 59.8 1024x768 60.0* 800x600 60.3 56.2 848x480 60.0 640x480 59.9 59.9 1152x864_60.00 (0x124) 81.0MHz h: width 1152 start 1216 end 1336 total 1520 skew 0 clock 53.3KHz v: height 864 start 867 end 871 total 897 clock 59.4Hz searock@searock-desktop:~$ xrandr --addmode VGA1 1152x864_60.00 But the problem is when ever I restart my computer I get this message. Could not apply the stored configuration for the monitors. Could not find a suitable configuration of screens. And then it comes back to 1024 x 786 My graphic card details : Intel(R) 82945G Express Chipset Family. Is there any way I can fix this once for all ? Thanks. Edit 1 : rumtscho has suggested me to modify xorg.conf file. But I am not sure what HorizSync means? is it Horizontal frequency ? My monitor model is Acer v173. Here's my specification. So what should be HorizSync and VertRefresh ? Edit 2 : I have edited my Xorg.conf file as follows : Section "Monitor" Identifier "Configured Monitor" HorizSync 30-80 VertRefresh 55-75 EndSection then I added the resolution and restarted my computer and still I am facing the same problem. Is there something that I am missing? Edit 3 : For now I have edited /etc/gdm/Init/Default(gdm startup scripts) to include following xrandr commands, just below line initctl -q emit login-session-start DISPLAY_MANAGER=gdm xrandr --newmode "1152x864_60.00" 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync xrandr --addmode VGA1 1152x864_60.00<br/> xrandr -s 1152x864_60.00 This has solved my problem, but this commands have increased my computer's boot time. I think I will have to edit xorg file properly. Edit 4 : Instead of adding this files to gdm startup scripts I have created a shell script and added it to startup (System - Preference - Startup Applications) #!/bin/bash xrandr --newmode "1152x864_60.00" 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync xrandr --addmode VGA1 1152x864_60.00 xrandr -s 1152x864_60.00 And don't forget to add execution rights. (Right Click - Properties - Permission - Allow executing file as program)

    Read the article

  • Monitoring the status of accounts with IT Service providers (ISP, Domain Registrar etc.)

    - by Sholom
    Hi All, Short version: You have software that tells you when your servers power-outlet is down. It monitors multiple servers from one management console, alerts you when something is wrong etc. Does anyone know of software that will let me take the same approach to monitor if the money-outlet (the bill!) is down (not paid) to my IT Services providers (ISP, Domain Registrar, MX Backup service etc). I need a top down, centrally managed service that is capable of sending out alerts. Just like the one that monitors my own exchange server etc. I don't mind if i have to manually enter every payment. Long version: Our very likable but absent minded bookkeeper keeps neglecting to pay our IT vendors on time. Just this past week our internet service was disconnected. Same could happen to many other mission critical accounts (domain registrar, backup MX, anti-virus license, HackerSafe (McAfee secure) service and even an 800 number to name a few). As the sysadmin, i monitor my severs to make sure they are plugged into the power-outlet. I believe i should also monitor my services to make sure they are plugged in to their money-outlet. To compound the problem, when the power goes out someone else will likely notice and notify me. But if a bill is not payed, no one will ever notice until service is lost. Lost as in losing our domain name which would cause a lot more damage then the power failing on our server. [Solution] = [Doesn't work because]: Retrain the bookkeeper = Wishful thinking. Notify my manager = Already have (via email). Protects me, does not solve problem. Fire bookkeeper = What makes you so sure the next one will never forget? Bottom line: Humans are humans and sooner or later something critical will be royally messed up. We need to partner with a machine to help us out here. Anybody have the same problem? What software/solution do you use? I would like software that emails me when a bill is passed due just like i get an email when the power outlet fails. Anyone hear of anything like that? Thanks

    Read the article

  • Broadcom HT1100 SATA controller not working properly with 1TB drives

    - by Jeff C
    I've been using RHEL distro's for several years and always managed to find the answers until now. I know this is more of a hardware issue, but I've been working on this for over a week and trust Linux and the IT community to help more then HP. I have CentOS 6.3 installed on an HP ProLiant DL145 G3 server with the BroadCom HT1100 IO controller and ServerWorks SATA Controller MMIO BIOS v3.0.0015.6 Firmware. This controller does not support large drives fully. Here's what I've tried and the results; Stock setup - Freezes on the ServerWorks POST screen. Can't even enter CMOS without disconnecting the drives. If I simply disconnect the SATA cables before it gets to the ServerWorks screen and reconnect afterwards I can boot from a CD, USB, PXE fine. However fiddling with cables at ever boot isn't practical. If I enter the BIOS config I can set it to not try booting the drives but leave the controller enabled. This lets me boot normally but the drives are not visible in the OS (live CDs or USB installed). I used method #2 to install and update CentOS. I have the /boot partition on a USB drive (everything else is on the SATA drives in software RAID1) hoping that would work around the issue but I get this Kernel panic - not syncing:Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.32-279.9.1.el6.x86_6 #1 Call Trace: [<ffffffff814fd6ba>] ? panic+0xa0/0x168 [<ffffffff81070c22>] ? do_exit+0x862/0x870 [<ffffffff8117cdb5>] ? fput+0x25/0x30 [<ffffffff81070c88>] ? do_group_exit+0x58/0xd0 [<ffffffff81070d17>] ? sys_exit_group+0x17/0x20 [<ffffffff8100b0f2>] ? system_call_fastpath+0x16/0x1b panic occured, switching back to text console I'm sure it should be possible to talk to the drives without the BIOS boot check since the BIOS doesn't see them in method #2 either, their disconnected when it checks, but Linux sees them fine. If anyone could help figure out how I would greatly appreciate it! The other possible option I've come across is a complex firmware update. Tyan has a few boards on their website with the HT1100 and a ServerWorks v3.0.0015.7 update which says "adds support for TB drives" in the release notes. If someone could help me get the Tyan SATA firmware into the HP ROM file so I could just reflash that would also be very much appreciated. Thanks for any help you guys can offer!

    Read the article

  • Thunderbird 3: can't change column width?

    - by rumtscho
    I recently installed Thunderbird 3.0.3. Just noticed a suboptimal UI setting: in the upper pane, which lists the e-mails in the current folder, the Date column is about 200px wide. So when I keep the window at 480x600, all I see in a row is: | tree icon | favourites icon | attachment icon | read icon | junk icon | Date and time, followed by 5cm whitespace | ... | P Where "P" is the first letter of the name of the sender. And the "..." is actually shown this way, I have no idea which column it is meant to be. But I don't see neither the sender, nor the message subject, which makes scrolling a folder for a certain mail rather pointless. I see these when I maximize the window, actually the columns are then not only bigger, they are arranged in another sequence. But I feel that holding a mail client permanently maximised at 1600x1200 is a waste of screen real estate. My naive solution attempt was to try to go with the mouse cursor to the right edge of the date column and try to shrink it by moving the cursor left while holding down the left mouse button. Not only is this default behaviour for all resizable columns I've ever encountered in GUIs, the cursor actually turns into a horizontal double-headed arrow. But pulling has no effect at all. I cannot make a wide column narrow, and I cannot make the narrow columns wide. I didn't find anything in the preferences either. So can please somebody explain how to get the columns arranged sensibly? Edit: I found out that I only have the problem when I drag the Thunderbird window to a GridMove screen area. It gets automatically resized, but doesn't notice the resize event or something, so the column width remains the same as under a maximized window. First making the window narrow using the mouse helps with column width, but the width of the mail pane is still too wide (rows don't reflow). Anyway, this seems to be a bug caused by the combination of the two applications and not a configuration problem, so I guess I'll have to live with it.

    Read the article

  • How did what appears to be a virus get on my computer? (explanation of situation enclosed)

    - by Massimo
    My system is Windows XP SP3, updated with the latest patches. The PC is connected to a Cisco 877 ADSL router, which does NAT from the internal network to its single static public IP address. There are no forwarded ports, and the router's management console can only be accessed from the inside. I was doing two things: working on a remote office machine via VPN and browsing some web pages on the Cisco web site. The remote network is absolutely safe (it's a lab network, four virtual servers, no publicly accessible services and no users at all; also, none of what I'm going to describe ever happened there). The Cisco web site... well, I suppose is quite safe, too. Suddenly, something happened. Strange popups appears anywhere; programs claiming they're "antimalware", "antispyware" et so on begins autoinstalling; fake Windows Update and Security Center icons pop up in the system tray. svchost.exe began crashing repeatedly. Then, finally, after some minutes of this... BSOD. And, upon rebooting, BSOD again. Even in safe mode. Ok, that was obviously some virus/trojan/whatever. I had to install a new copy of Windows on another partition to clean things up. I found strange executables, services and DLLs almost anywhere. Amongst the other things, user32.dll and ndis.sys had been replaced. A fake software called "Antimalware Doctor" had been installed. There were services with completely random names or even GUIDs (!), and also ones called "IpSect" and "Darkness". There were executable files without an .exe extension. There were even two boot-class drivers, which I'm quite sure are the ones that finally caused the system to crash. A true massacre. Ok, now the questions: What the hell was that?!? It was something more than a simple virus! How did it manage to attack my computer, as I am behind a firewall and was not doing anything even only potentially harmful on the web at the time?

    Read the article

  • Getting an boot error when starting computer

    - by Rob Avery IV
    I was in the middle of watching a movie on Netflix, then suddenly everything started crashing. First, explorer.exe closed down, then Google chrome. I had multiple things running in the background (Steam, Raptr, etc.). Individuality, each of those apps closed down also. When they did, a small dialog box popped up for each of them, one at a time, saying that it was missing a file, it couldn't run anymore, or something similar to that. It also had some jumbled up "code" with numbers and letters that I couldn't read. Ever since then, everytime I turn my computer on, it will run for a few seconds and give this error "Reboot and select proper boot device or insert boot media in selected boot device and press a key_". No matter how many times I try to reboot it, it always gives me the same error. A day later after this happened I was able to start the computer, but before it booted, it told me that I didn't shut down the computer properly and asked how I wanted to run the OS (Run Windows in Safety Mode, Run Windows Normally, etc.). Once I logged, everything went SUPER slow and everything crashed almost instantly. The only thing I opened was Microsoft Security Essentials and only got in about two clicks before it was "Not Responding". Then, after that the whole computer froze and I had to restart it. Now, it's back to saying what it originally said, "Reboot and select proper boot device or insert boot media in selected boot device and press a key_". I built this PC back in February 2012. Here are the specs: OS: Windows 7 Ultimate CPU: AMD 8-core GPU: Nvidia GTX Force 560 Ti RAM: 16GB Hard Drive: Hitachi Deskstar 750GB I'm usually very good taking care of my PC. I don't download anything that's not from a trusted site or source. I don't open up any spam email or such or go to any harmful websites like porn or stream movies. I am very clean with the things I do with my PC and don't do many DIFFERENT things with it. I use it pretty often especially for video games and doing homework in Eclipse. Also, good to note that I don't have any Norton or antisoftware installed. I have Microsoft Security Essentials installed but never did a scan. Thanks!

    Read the article

  • What the best way to achieve RPO of zero and lowest possible RTO (less than 15 minutes) with SQL 2008 R2?

    - by Adrian Hope-Bailie
    We are running a payments (EFT transaction processing) application which is processing high volumes of transactions 24/7 and are currently investigating a better way of doing DB replication to our disaster recovery site. Our current and previous strategies have included using both DoubleTake and Redgate to replicate data to a warm stand-by. DoubleTake is the supported solution from the payments software vendor however their (DoubleTake's) support in South Africa is very poor. We had a few issues and simply couldn't ever resolve them so we had to give up on DoubleTake. We have been using Redgate to manually read the data from the primary site (via queries) and write to the DR site but this is: A bad solution Getting the software vendor hot and bothered whenever we have support issues as it has a tendency to interfere with the payment application which is very DB intensive. We recently upgraded the whole system to run on SQL 2008 R2 Enterprise which means we should probably be looking at using some of the built-in replication features. The server has 2 fairly large databases with a mixture of tables containing highly volatile transactional data and pretty static configuration data. Replication would be done over a WAN link to a separate physical site and needs to achieve the following objectives. RPO: Zero loss - This is transactional data with financial impact so we can't lose anything. RTO: Tending to zero - The business depends on our ability to process transactions every minute we are down we are losing money I have looked at a few of the other questions/answers but none meet our case exactly: SQL Server 2008 failover strategy - Log shipping or replication? How to achieve the following RTO & RPO with logshipping only using SQL Server? What is the best of two approaches to achieve DB Replication? My current thinking is that we should use mirroring but I am concerned that for RPO:0 we will need to do delayed commits and this could impact the performance of the primary DB which is not an option. Our current DR process is to: Stop incoming traffic to the primary site and allow all in-flight transaction to complete. Allow the replication to DR to complete. Change network routing to route to DR site. Start all applications and services on the secondary site (Ideally we can change this to a warmer stand-by whereby the applications are already running but not processing any transactions). In other words the DR database needs to, as quickly as possible, catch up with primary and be ready for processing as the new primary. We would then need to be able to reverse this when we are ready to switch back. Is there a better option than mirroring (should we be doing log-shipping too) and can anyone suggest other considerations that we should keep in mind?

    Read the article

  • What's the best scenario for using a wireless router with Comcast Business Class

    - by Buck
    Just had Comcast Business Class internet installed (usage details at bottom of post). During the call to order I asked about the hardware they'd be providing and was told it was a docsis 3 modem that I'd have to pay $7.00/month for. Figuring I'd have to buy a router anyway, I decided to get my own modem - a Surfboard SB6121 Docsis 3. I called in to tech support to ask some questions and learned that the modem they would have provided DID have a router built in. It's an SMCD3G-CCR. It's not wireless (we need wireless). The guy explained that it was better to have their hardware here because if there's a problem with our service and we're using our own hardware, chances are they'll blame it on our hardware and do nothing since they don't support it. He explained that I could still hang my own wireless router off their modem/router and if we ever had any service problems, we'd be able to plug directly into their hardware and they'd be able to tell where the problem is and they wouldn't be able to pawn it off onto "customer provided equipment". That all said, a few questions: 1. Am I better off returning my Surfboard modem and getting the Comcast one? If I get a wireless router and plug into one of the ethernet ports of the Comcast device, should I NOT plug anything else into the Comcast device since it would be a different network from anything connecting via the wireless router? Is that correct? Given that I know VERY LITTLE about networking and setting up hardware like this... since I need wireless and will HAVE to get a wireless router to work with this Comcast device, do I need to do anything with the settings of the Comcast device? Do I use security on the Comcast device or the wireless router or both? Any suggestions or anything I need to think about, given this scenario, in order to use a business-type voip service like RingCentral or Jive or Nextiva? Any recommendations on a wireless router for this scenario? We are running 2 PCs (possibly 3-4 in the future) - could be wired for the time being if needed but would prefer wireless; would like to have a networked hard drive and a networked printer; NEED business-type VOIP service asap for 2 phone lines. Would like to hook up some IP cameras at some point (but not the kind that require static IPs since I don't have one nor do I plan to pay Comcast another $15/month for one). I don't have or plan to have any type of web servers or anything like that. Want to use WPA or WPA2 security and take advantage of the NAT feature of the router for additional protection (that's the extent of my networking knowledge).

    Read the article

< Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >