Search Results

Search found 34595 results on 1384 pages for 'vendor id'.

Page 228/1384 | < Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >

• Screen flickering when using midrange brightness values on Dell XPS

  - by Eliran Malka

  After a fresh Ubuntu install on my laptop, I discovered the function keys for screen brightness control (Fn+F4 and Fn+F5) are not working. Digging around here, I managed to get it to work by following the solution suggested on this post and that one, but alas — after applying it, a strange problem occurred: Setting the brightness level to any value other than minimum or maximum, the screen starts flickering back and forth from the selected level to full brightness, apparently due to Dell's power saver attempting to dim the screen to adjust the brightness levels. I looked up for a solution here on the site, and possibly everywhere, with no avail. Also tried: To manually control the brightness by configuring the ACPI level (setting values by echo [some_value] | sudo tee /sys/class/backlight/[vendor]_backlight/[some_key], without success. Installing the Intel graphics driver, thinking it's missing. Realized it's installed out of the box by installing Mesa Utils. How to resolve this? Environment Model: Dell Studio XPS 13 OS: Windows 7 64bit / Ubuntu 12.04 32bit (dual boot) Graphics Driver: Intel HD 3000 (Sandybridge Mobile x86/MMX/SSE2) lshw -C display output: *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:47 memory:f0000000-f03fffff memory:e0000000-efffffff ioport:2000(size=64)

  Read the article

• Using unordered_multimap as entity and component storage

  - by natebot13

  The Setup I've made a few games (more like animations) using the Object Oriented method with base classes for objects that extend them, and objects that extend those, and found I couldn't wrap my head around expanding that system to larger game ideas. So I did some research and discovered the Entity-Component system of designing games. I really like the idea, and thoroughly understood the usefulness of it after reading Byte54's perfect answer here: Role of systems in entity systems architecture. With that said, I have decided to create my current game idea using the described Entity-Component system. Having basic knowledge of C++, and SFML, I would like to implement the backbone of this entity component system using an unordered_multimap without classes for the entities themselves. Here's the idea: An unordered_mulitmap stores entity IDs as the lookup term, while the value is an inherited Component object. Examlpe: ____________________________ |ID |Component | ---------------------------- |0 |Movable | |0 |Accelable | |0 |Renderable | |1 |Movable | |1 |Renderable | |2 |Renderable | ---------------------------- So, according to this map of objects, the entity with ID 0 has three components: Movable, Accelable, and Renderable. These component objects store the entity specific data, such as the location, the acceleration, and render flags. The entity is simply and ID, with the components attached to that ID describing its attributes. Problem I want to store the component objects within the map, allowing the map have full ownership of the components. The problem I'm having, is I don't quite understand enough about pointers, shared pointers, and references in order to get that set up. How can I go about initializing these components, with their various member variables, within the unordered_multimap? Can the base component class take on the member variables of its child classes, when defining the map as unordered_multimap<int, component>? Requirements I need a system to be able to grab an entity, with all of its' attached components, and access members from the components in order to do the necessary calculations and reassignments for position, velocity, etc. Need a clarification? Post a comment with your concerns and I will gladly edit or comment back! Thanks in advance! natebot13

  Read the article

• Squeezing all the SEO out of a URL as possible.

  - by John Isaacks

  I am working on an ecommerce site, I told our SEO consultant that I plan to make the URL scheme: /products/<id>/<name>. This is similar to Stackoverflow's URLs which are /questions/<id>/<title>. He asked me if I could change the URL scheme to /p/<id>/<name> instead. I know why he wants this change, the word "products" isn't needed to find the correct product, and it doesn't offer any SEO, so shortening it to just p would make the relevant keywords in the <name> weigh more. His main priority is maximizing SEO, but the part that I don't think he is considering is how this effects the semantics of the site. Also having the word "products" looks like it has meaning and a reason for being there, just having a p looks chaotic and ugly to me. I also don't think it makes that much of a difference does it? Stackoverflow doesn't use /q/<id>/<title> and they do just fine, I do realize that theres many factors at play here though, not just the URL. So I want some outside opinions on which is the better way and why?

  Read the article

• Should a Parent with Children have a DefaultChild, or should a Child have a Default property?

  - by Stijn

  Which of the following two models makes more sense? I'm leaning towards the first one because there can only be one default child. The examples are in C# but I think it can apply to other languages too. Here DefaultChild holds one of the items in Children. class Parent { int ID { get; set; } Child DefaultChild { get; set; } IEnumerable<Child> Children { get; set; } } class Child { int ID { get; set; } } Here one of the items in Children has Default set to true while the others have it set to false. class Parent { int ID { get; set; } IEnumerable<Child> Children { get; set; } } class Child { int ID { get; set; } bool Default { get; set; } } A concrete situation: a User in our system has one or more Customers attached. When logging in, if said User has a default Customer, they are immediately working under this Customer. If they don't, they have to select a Customer to work under. While logged in, they can switch between Customers.

  Read the article

• Recording custom variables to identify individual users with Google Analytics

  - by mrtsherman

  I have been asked by our marketing department to add Google Analytics custom variable tracking to my company's website. As the website uses server side includes, modifications to the tracking tag roll out globally - maintenance is therefore a headache! So, if I add the following code (keeping in mind SSI so every page has the same code): // visitor level tracking, id = 12345 // Record a unique id for each visitor. When they return also track this id _gaq.push(['_setCustomVar', 1, 'id', '12345', 1]); // page level tracking // If the user signs up for our newsletter we set newsletter to true // Each page they subsequently visit should also mark this as true _gaq.push(['_setCustomVar', 1, 'newsletter', 'true', 1]); I don't use GA and the marketing people don't use custom variables, so we don't actually know how or if this will work. Therefore my questions are:- Do I want Page, Session or Visitor level tracking? What happens when the same code is used on every page? Can GA 'overwrite' a setting. For example, if I set newsletter to true on page X and then user navigates to page Y, will the variable also be marked there?

  Read the article

• wifi not working hp dv4

  - by Blaze

  i get this output for sudo lshw -C network : *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 06 serial: 3c:4a:92:cd:63:98 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:3000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network DISABLED description: Wireless interface product: RT5390 [802.11 b/g/n 1T1R G-band PCI Express Single Chip] vendor: Ralink corp. physical id: 0 bus info: pci@0000:0a:00.0 logical name: wlan0 version: 00 serial: 90:00:4e:82:3c:5b width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.0.0-17-generic-pae firmware=0.34 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:c2500000-c250ffff i cant enable the wifi using the fn+f12 key.. its just stuck. In windows 7 it gets enabled when i press the same keys. but this happens after it gets booted up... i just want to use the wifi in anyway possible. can anybody help?

  Read the article

• How do I pick which agency to go through?

  - by RoboShop

  I work in a town where the majority of work comes from the government. As a contractor, I generally have to apply for work through agencies which are on the government's preferred vendor's list. Most jobs are publicly listed and to apply for them, you generally need an agency to represent you by submitting your application with a rate which is usually your rate plus their commission. I've been trying to figure out what the agencies do, and it seems a large part of what they do is 1) get on that preferred vendor's list and 2) forward resumes. So right now, my policy is that since their commission affects how expensive I am, one - I don't work with companies that do not disclose their margin. And two, I go for the agency that takes the least amount of commission for the job I want to apply for. IS that the best approach? I would think applying for a job with the most competitive rate is the best approach but I also wonder whether which agency you're applying through actually matter? I know some agencies actually build personal relationships with senior managers but how do I know which one? How do I know that actually affect my job prospects? What criteria should I use to decide which agent I go through for the job?

  Read the article

• dell vostro 1000 broadcom wireless connection

  - by lorrenuy

  I have a problem with the hardware broadcom wifi. I press the hotkey fn+f2 to activate the hardware and this will not work. I'll look at the drivers but it appears to be installed. How can I solve this problem? Ubuntu is all new to me so if possible, give me a clear explanation. Now do I connect the lan cable. I use the Ubuntu 11.10 lawrence@lawrence-Vostro-1000:~$ sudo lshw -class network [sudo] password for lawrence: PCI (sysfs) *-network description: Network controller product: BCM4311 802.11b/g WLAN vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:c0200000-c0203fff *-network description: Ethernet interface product: BCM4401-B0 100Base-TX vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 logical name: eth1 version: 02 serial: 00:1c:23:a2:b9:a9 size: 100Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=full ip=192.168.1.18 latency=64 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:21 memory:c0300000-c0301fff lawrence@lawrence-Vostro-1000:~$ lawrence@lawrence-Vostro-1000:~$ rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes

  Read the article

• Centrino Wireless-N 1000 takes forever to connect and keeps asking for password

  - by waclock

  A few days ago I started having this problem. When I tried to connect to any WiFi Connection it would stay connecting forever, and after a minute or so it would ask me for the password again. The strange thing is that this happened out of nowhere, I did not install any new drivers or anything like that. After this happened I decided to uninstall ubuntu and install it again ("inside windows") but the problem is still there. Any suggestions would be greatly appreciated. 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 06 serial: 2c:27:d7:aa:e4:7d size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:50 ioport:4000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:0d:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:09:9c:58 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-23-generic-pae firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:52 memory:c4500000-c4501fff *-network description: Ethernet interface physical id: 1 bus info: usb@2:1.2 logical name: eth1 serial: ee:85:2f:7d:80:96 capabilities: ethernet physical configuration: broadcast=yes driver=ipheth ip=172.20.10.2 link=yes multicast=yes

  Read the article

• Cannot boot into ubuntu 12.10

  - by sriram

  Below given are the steps which I followed to install ubuntu 12.10 with existing windows 8 in my machine. I downloaded ubuntu 12.10 into my disk and made it bootable from my usb by selecting that iso file. Then restared my mahine and in BIOS I selected boot from usb. Went into Linux os and selected install ubuntu alongside windows 8. It asked for memory allocation and I selected 550 GB for Ubuntu and 404GB for Windows. After that it completed ubuntu installation. The booted into my windows 8 and used easyBCD to add a new entry. Ubuntu grup2 Now the easyBCD shows, There are a total of 4 entries listed in the bootloader. Default: Windows 8 Timeout: 10 seconds EasyBCD Boot Device: C:\ Entry #1 Name: Lenovo Recovery System BCD ID: {e58d0cb6-2eae-11e2-9d20-806e6f6e6963} Device: \Device\HarddiskVolume3 Bootloader Path: \EFI\Microsoft\Boot\LrsBootMgr.efi Entry #2 Name: EFI USB Device BCD ID: {e58d0cb5-2eae-11e2-9d20-806e6f6e6963} Device: Unknown Bootloader Path: Entry #3 Name: Windows 8 BCD ID: {current} Drive: C:\ Bootloader Path: \windows\system32\winload.efi Entry #4 Name: Ubuntu 12.10 BCD ID: {6f173570-3bce-11e2-be74-c0143dd589c0} Drive: C:\ Bootloader Path: \NST\AutoNeoGrub0.mbr Next I restarted my system and in the boot options it shows windows 8 and ubuntu 12.10 When I click on ubuntu it displays, \NST\AutoNeoGrub0.mbr status 0xc000007b The application or operating system cold not be loaded because a required file is missing or contains errors. Can you help me resolve this... Thanks :)

  Read the article

• Security Issue in LinkedIn &ndash; View any 3rd profile without a premium account.

  - by Shaurya Anand

  Originally posted on: http://geekswithblogs.net/shauryaanand/archive/2013/06/25/153230.aspxI discovered this accidently when my wife forwarded a contact on LinkedIn from her tablet, using the mobile interface of the website. On opening the contact on my desktop, I was surprised to see, I need to upgrade my account to view the contact. Doing some research along with my wife, I found this simple security vulnerability from LinkedIn that can let anyone view a contact’s full profile even when you have a “not upgraded” LinkedIn account and that the contact is a “3rd + Everyone Else”. Here’s an example of what I am talking about. I just made a random search on LinkedIn for a contact whose name starts with Sacha. Do note, this is just a walkthrough and I am not publicizing any Sacha. I check the “3rd + Everyone Else” and find a “LinkedIn Member”. On clicking this person’s profile to view, I am presented with the following page, asking me to upgrade. Make a note of this page’s web address and you get the profile id from it. For example, for this contact, the page address is: http://www.linkedin.com/profile/view?id=868XXX35 The Profile Id for this contact is 868XXX35. Now, open following page where the Profile Id is the same as the one we grabbed a moment earlier. https://touch.www.linkedin.com/?#profile/868XXX35 The mobile page exposes this contact information and you even get the possibility to connect to this person without an introduction mail (InMail). I hope someone from LinkedIn sees and issues a fix for this. I am pretty sure, it’s something that they don’t want the user to do without purchasing an upgrade package.

  Read the article

• placing h2 and h3 tags around words in paragraphs

  - by sam

  if i have a page like with an H1 heading and then just a long paragraph wraped in p tags, is it ok to write the paragraph as bellow (with the h tags mixed into the paragraph) and just style it so it looks all the same so that i get the benefit of using h2 and h3 tags ? Im aware this is not the 'proper' use of the H tags as their meant to be headings but can i use them like this as the site isnt built using mulitple headings on the same page (please ignore over optimization this is just for illitrative purposes) <h1>Red shoes</h1> <p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Phasellus id dui id mi consectetur tincidunt. Mauris at sem non urna congue eleifend sed quis nulla. Aenean nisl porta eget auctor vel, semper eget massa.</p> <h2>Red shoes</h2> <p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Phasellus id dui id mi consectetur tincidunt. Mauris at sem non urna congue eleifend sed quis nulla. Aenean nisl porta eget auctor vel, semper eget massa.</p> <h3>red shoes</h3> <p>Lorem ipsum.</p>

  Read the article

• How to make Unity 3D work with Bumblebee using the Intel chipset

  - by EboMike

  I have a Sony VAIO S laptop with the dreaded Optimus and finally managed to get Bumblebee to work fully on Ubuntu 12.04 so that I can utilize both the hardware acceleration of the Intel chipset as well as the Nvidia one via optirun and/or bumble-app-settings. However, the desktop effects don't work. But they should, I vaguely remember that they worked for a while before I had Bumblebee installed. This is what I get with the support test: :~$ /usr/lib/nux/unity_support_test -p Xlib: extension "NV-GLX" missing on display ":0". OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile OpenGL version string: 1.4 (2.1 Mesa 8.0.2) Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: no GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no First of all, I kind of doubt that the chipset doesn't support VBOs (essentially a standard feature in GL). Neither Xorg.0.log nor Xorg.8.log show any particular errors. As for the Nvidia drivers: In order to get them to work, I had to install the 304.22 drivers (older ones wouldn't work). They clobbered libglx.so, so I reinstated the xserver-xorg-core libglx.so in its original place, moved Nvidia's libglx.so to an nvidia-specific folder and specified that folder in the bumblebee.config. That seems to work and shouldn't cause the problem I see here. For fun, I tried to use the Nvidia chipset for Unity, but that didn't fly either: ~$ optirun /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GT 640M LE/PCIe/SSE2 OpenGL version string: 4.2.0 NVIDIA 304.22 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no

  Read the article

• Missing driver ASUS PCE-N53 11n N600 PCI-E Adapter

  - by oyse

  I have problems with getting an Asus PCE-N53 11n N600 PCI-E Adapter card to work on my desktop computer. As far as I can tell no drivers are installed for the card. I know I can manually download the drivers directly from Asus, but I would rather not go that route. If there are anyone that knows about any packages or other things I can do to make this work would be much appreciated. Some systems details: $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise $ sudo lshw -C network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: d4:3d:7e:03:b9:1d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.0.173 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:d000(size=256) memory:f2104000-f2104fff memory:f2100000-f2103fff *-network UNCLAIMED description: Network controller product: Ralink corp. vendor: Ralink corp. physical id: 0 bus info: pci@0000:04:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7100000-f710ffff $ lsmod Module Size Used by nvidia 12319264 51 vesafb 13844 1 snd_hda_codec_hdmi 32474 1 joydev 17693 0 bnep 18281 2 rfcomm 47604 0 bluetooth 180104 10 bnep,rfcomm snd_hda_codec_realtek 224173 1 snd_seq_midi 13324 0 ppdev 17113 0 snd_rawmidi 30748 1 snd_seq_midi usbhid 47199 0 hid 99559 1 usbhid nouveau 774641 0 parport_pc 32866 1 snd_hda_intel 33773 5 ttm 76949 1 nouveau snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel drm_kms_helper 46978 1 nouveau drm 242038 3 nouveau,ttm,drm_kms_helper snd_seq_midi_event 14899 1 snd_seq_midi snd_hwdep 13668 1 snd_hda_codec snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event i2c_algo_bit 13423 1 nouveau mxm_wmi 12979 1 nouveau wmi 19256 1 mxm_wmi mac_hid 13253 0 snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec psmouse 97362 0 video 19596 1 nouveau snd_timer 29990 2 snd_seq,snd_pcm snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 20 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_pcm,snd_timer,snd_seq_device serio_raw 13211 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp r8169 62099 0

  Read the article

• Can I set my Optimus Nvidia card to run Unity3D with bumblebee?

  - by manuhalo

  I'd like to know whether I can run compiz on my Nvidia card to speed things up. It's a Dell XPS15 laptop but I'm mostly using it as a desktop, so battery life is not important. Apparently my Intel integrated card is able to run unity 3D, but my Nvidia GT 420M is not. Here's the output of unity_support_test, both with optirun and without it: manuhalo@Ubuntu-XPS-L501X:~$ optirun /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GT 420M/PCI/SSE2 OpenGL version string: 4.1.0 NVIDIA 280.13 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no manuhalo@Ubuntu-XPS-L501X:~$ /usr/lib/nux/unity_support_test -p OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Intel(R) Ironlake Mobile OpenGL version string: 2.1 Mesa 7.11 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes Any ideas of why this is happening? Thanks in advance to anyone able to shed some light on this. What I have tried: Installed the v290 drivers from the x-stable PPA. Tried forcing Unity-3D to work by telling Unity to ignore the unity-support-test results i.e. gksudo gedit /etc/environment add the following UNITY_FORCE_START=1 to the end of the file.

  Read the article

• Benchmarking ORM associations

  - by barerd

  I am trying to benchmark two cases of self referential many to many as described in datamapper associations. Both cases consist of an Item clss, which may require many other items. In both cases, I required the ruby benchmark library and source file, created two items and benchmarked require/unrequie functions as below: Benchmark.bmbm do |x| x.report("require:") { item_1.require_item item_2, 10 } x.report("unrequire:") { item_1.unrequire_item item_2 } end To be clear, both functions are datamapper add/modify functions like: componentMaps.create :component_id => item.id, :quantity => quantity componentMaps.all(:component_id => item.id).destroy! and links_to_components.create :component_id => item.id, :quantity => quantity links_to_components.all(:component_id => item.id).destroy! The results are variable and in the range of 0.018001 to 0.022001 for require function in both cases, and 0.006 to 0.01 for unrequire function in both cases. This made me suspicious about the correctness of my test method. Edit I went ahead and compared a "get by primary key case" to a "finding first matching record case" by: (1..10000).each do |i| Item.create :name => "item_#{i}" end Benchmark.bmbm do |x| x.report("Get") { item = Item.get 9712 } x.report("First") { item = Item.first :name => "item_9712" } end where the results were very different like 0 sec compared to 0.0312, as expected. This suggests that the benchmarking works. I wonder whether I benchmarked the two types of associations correctly, and whether a difference between 0.018 and 0.022 sec significant?

  Read the article

• How do I get Graphics drivers / bluetooth / card reader working on an Acer Aspire V3-571G?

  - by Adam

  A couple of days ago I bought an Acer Aspire V3-571G laptop without a system installed on it. The only thing that was there was Linux Linpus. I created a bootable CD with Ubuntu 12.04 64-bit - I read that my processor was 64 bit and that it might be a good configuration for my gear (I'm not especially fluent with all the computer stuff, still trying to learn) and replaced Linpus with Ubuntu. Everything seemed to work fine, but there're few exceptions to that which came pass my way. My bluetooth doesn't work. It seems to be switched on, but when I check my system settings the button is actually off, and I can't drag it 'perminently' to the 'on' position. Tried a couple of commands I found on the net, none of them helped and there was no word whatsoever in my BIOS settings about enabling bluetooth. My card reader has some serious problems with copying more than one file at a time. I tried to put some music on my phone through a MicroSD card adapter (because my bluetooth doesn't work) and it got stuck every single time I copied an album on it. I'm not sure if all my drivers were properly installed, so I checked in the terminal if it could tell me sth about my graphics. typed: sudo lshw -c display and what i got was: *-display UNCLAIMED description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller cap_list configuration: latency=0 resources: memory:b2000000-b2ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) *-display description: VGA compatible controller product: Ivy Bridge Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:b3000000-b33fffff memory:c0000000-cfffffff ioport:3000(size=64) As I said I'm no expert and not english-speaking generally, but it doesn't seem to be right. I've got a NVIDIA GeForce GT 640M.

  Read the article

• Upcoming: Oracle Advanced Benefits Advisor Webcasts Announced

  - by user793553

  Oracle support is pleased to announce a new webcast covering the Open Enrollment functionality in Oracle Advanced Benefits.  The webcast is repeated on three different dates, in order to make attendance easier, whatever timezone you operate in. These one-hour sessions are recommended for technical and functional users who will be having an Open Enrollment cycle in the next 12 months.  The session will review the best proactive practices recommended by Oracle Support regardless of when your Open Enrollment takes place.  It will review planning, patching, data corruption and critical checklists. TOPICS WILL INCLUDE: Planning Ahead for Open Enrollment testing Required Patches Test performance Avoid major patching/updates Data corruption issues A short, live demonstration (only if applicable) and question and answer period will be included.  Below is the schedule for the webcasts.  The same can be found in the MyOracleSupport Document Advisor Webcast Current Schedule Doc ID 740966.1 Please follow the links to register for your chosen session. Webcast Topic and Description Registration Details Date and Time Best Benefits Practices for Open Enrollment Session 3   Doc ID 1489318.1 October 17, 2012 at 16:00 US EST Best Benefits Practices for Open Enrollment Session 4   Doc ID 1489319.1 October 31, 2012 at 16:00 US EST Product Enhancements in R12.1.3 RUP 5 Session 2   Doc ID 1489320.1 November 07, 2012 at 16:00 US EST

  Read the article

• Discs in DVD Drive not being read

  - by I Heart Ubuntu

  Does anyone have an experience with Ubuntu that is no longer reading discs in the DVD drive? This is my first time Ubuntu does not see the disc :| The disc is fine and works on my other Ubuntu computers. The drive is there and powered. I can even type in eject in a terminal and the drive will open. Using the command: sudo lshw -C disk I am able to see info about my drive too. Actually BOTH of my internal DVD drives cannot read discs anymore. If the output is not readable below, here is the info in pastebin. http://pastebin.com/GqqSCTPw *-cdrom:0 description: DVD writer product: DVD_RW ND-3500AG vendor: _NEC physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/cdrom1 logical name: /dev/cdrw1 logical name: /dev/dvd1 logical name: /dev/dvdrw1 logical name: /dev/scd0 logical name: /dev/sr0 version: 2.1B serial: [_NEC DVD_RW ND-3500AG2.1B06022300BT-LIGGY capabilities: removable audio cd-r cd-rw dvd dvd-r configuration: ansiversion=5 status=nodisc *-cdrom:1 description: DVD-RAM writer product: CDDVDW SH-S222A vendor: TSSTcorp physical id: 0.1.0 bus info: scsi@0:0.1.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd1 logical name: /dev/sr1 version: SB01 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc

  Read the article

• How do I install 10.04 on a Vortex86DX embdedded system?

  - by mathematician1975

  I am trying to install Ubuntu on a Netcom NC-499 board that contains a Vortex86DX processor. The processor vendor claims support for Ubuntu 10.04 but I am having problems installing it. I am trying to install to a 8GB compact flash card attached to the board with an IDE connector, using a USB connection CD-Rom drive and a burned ISO image obtained from this link http://old-releases.ubuntu.com/releases/10.04.0/ubuntu-10.04.3-desktop-i386.iso . Installation proceeds up to the point of around 78% but during the stage where the installer informs me that it is "configuring apt", the installer terminates with a popup dialog containing the following "The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again." I have no idea what to do at this point. I am a Linux novice and I do not really know how to investigate the problems with the installation. I have configured the BIOS exactly according to how the vendor specifies and they assure me that this version is fully compatible with their hardware and yet I am unable to get a decent install. I am able to install Ubuntu 8.04 using exactly the same procedure successfully so I am sure there is no problem with my CD-Rom compatibility or the compact flash drive. Any help will be gratefully received.

  Read the article

• Is this a dual monitor reset bug?

  - by Tentresh

  My two displays are: Intel GMA x4500 Laptop (1280x800 native resolution of the built-in display) External display (1920x1080) A few minutes after I login to my dual monitor setup, it gets reset to mirror screens. If I restore the settings via the displays application, everything is fine. On each reset, the following messages are written into /var/log/Xorg.0.log: [ 60.852] (II) PM Event received: Capability Changed [ 60.852] I830PMEvent: Capability change [ 132.920] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 132.920] (II) intel(0): Printing DDC gathered Modelines: [ 132.920] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 134.228] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled Whereas right on startup or manual resolution reset, /var/log/Xorg.0.log reports the expected frame buffer allocation: [ 1562.382] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 1562.382] (II) intel(0): Printing DDC gathered Modelines: [ 1562.382] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 1576.740] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled Is Ubuntu 12.04 not compatible with my video card? Can this be solved within Ubuntu? I like its interface, but manually fiddling with resolution on every login is not bearable.

  Read the article

• Nifty GUI Layout

  - by Jason Crosby

  I am new to JME3 game engine but I know Android XML GUI layouts pretty good. I have a simple layout here and I cant figure out what is wrong. Here is my XML code: <?xml version="1.0" encoding="UTF-8"?> <nifty xmlns="http://nifty-gui.sourceforge.net/nifty-1.3.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://nifty-gui.sourceforge.net/nifty-1.3.xsd http://nifty-gui.sourceforge.net/nifty-1.3.xsd"> <useControls filename="nifty-default-controls.xml" /> <useStyles filename="nifty-default-styles.xml" /> <screen id="start" controller="com.jasoncrosby.game.farkle.gui.MenuScreenGui"> <layer id="layer" backgroundColor="#66CD00" childLayout="center"> <panel id="panel" align="center" valign="center" childLayout="center" visibleToMouse="true"> <image filename="Textures/wood_floor.png" height="95%" width="95%"/> <panel id="panel" align="center" valign="center" childLayout="center" visibleToMouse="true"> <text text="test" font="Interface/Fonts/Eraser.fnt"></text> </panel> </panel> </layer> </screen> Everything works good until I get to displaying the text. I have tried different alignments and tried moving the text into different panels but no matter what I do the text is never in the center of the screen. Its always in the upper left corner so far I can only see the lower right part of the text. I'm sure it has to be something simple but since I'm new to this I'm not noticing anything. Thanks for the help in advance.

  Read the article

• Wireless doesn't work after installing 11.10

  - by Ingram

  I just did a fresh install of 11.10 32 bit and I can't get my wireless to work. I installed the drivers the Broadcom STA wireless drivers through additional drivers and rebooted, but it still doesn't see any wireless networks Did something change in 11.10 that makes the wireless card not work anymore? I was using 10.10 before, and it worked fine. Do I need to go back to 10.10? sudo lshw -C network [sudo] password for user1: *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 10 serial: 00:1f:16:be:55:ff size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 duplex=full firmware=sb v2.19 ip=192.168.0.70 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:43 memory:f0300000-f030ffff *-network UNCLAIMED description: Network controller product: BCM4311 802.11b/g WLAN vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:09:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f0400000-f0403fff

  Read the article

• "Enable Wireless" option is disabled in network settings

  - by silenTK

  I'm using Ubuntu 11.10 (dual booted with Windows 7) but I'm unable to access Internet wireless even though I can do so on Windows 7. The output for rfkill list all is given below: rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no The output for sudo lshw -C network *-network DISABLED is: description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth1 version: 01 serial: 11:11:11:11:11:11 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:16 memory:c2500000-c2503fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 05 serial: 22:22:22:22:22:22 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:42 ioport:3000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff Broadcom STA wireless driver is installed, activated, and currently in use. My laptop is a HP-Pavilion-g6-1004tx. My hardware switch is on. Enable Wireless option is also disabled in network settings.

  Read the article

• Dell inspiron not finding Vodafone router

  - by Jeggy

  I have a "Dell inspiron 1564" and ubuntu doesn't find my friends router it works great at home, he has a vodafone router jeggy@jeggy-XPS:~$ sudo lshw -C network *-network description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: eth1 version: 01 serial: 78:e4:00:2a:d1:eb width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:17 memory:f0200000-f0203fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 02 serial: b8:ac:6f:67:32:52 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:3000(size=256) memory:f0410000-f0410fff memory:f0400000-f040ffff memory:f0420000-f043ffff *-network description: Ethernet interface physical id: 4 logical name: ham0 serial: 7a:79:05:ff:3e:ec size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full firmware=N/A ip=5.255.62.236 link=yes multicast=yes port=twisted pair speed=10Mbit/s

  Read the article

< Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >