Search Results

Search found 13575 results on 543 pages for 'desktop virtualization'.

Page 229/543 | < Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >

• Network with bridge and port forwarding?

  - by rafek

  Hi! Below is my current (and planned) home network configuration. I would like to connect my non-wifi-capable desktop to my home network. The question is: HOW? What device do I need? The primary requiremen is that I need to be able to forward ports to my desktop. How would I achieve this? Is there something like "double port forwarding"? Could anyone please explain this configuration to me? Thank you in advance!

  Read the article

• Alternatives to Crashplan for VPS?

  - by Chloe

  I use SFTP Net Drive to mount a remote VPS so I can back it up. However, it's taken over 3+ days to scan! I ran 'ls -lR' from my desktop over the mounted network drive and it only took about 5m to list all the files! There are only about 5000 files and 2 GB. I know Crashplan can run headless on the VPS itself, but that sounds like a pain to set up, and it takes so much memory on the server. The VPS doesn't have a lot of memory to spare - it's less than my desktop. Is there another program that can communicate with a Crashplan backup protocol and has a command line interface? backup /home

  Read the article

• Alternatives to Citrix GoToAssist ?

  - by Evan Carroll

  Citrix GoToAssist is a really nifty little web application for customer support that allows you to take control of someones OSX, or Windows machine. Essentially, it works likes this: You log in to your management console You get a code You give them a code, and a website (fastsupport.com) They go there and enter in the code They accept the browser applet which installs a program on their computer You have control of their desktop You can see their desktop, configure applications, etc. They can also see when you disconnect. It is really rather nifty, but it doesn't support Linux and it is rather expensive (660$ a year). Does anyone know of any alternatives to this? I'm looking for a solution as simple on the user as this one, that doesn't require firewall configuration or setting up ssh/vnc/rdesktop etc.

  Read the article

• Triple (3) Monitors under Linux

  - by widgisoft

  I have a 3 monitor setup (each 1680x1050) via an Nvidia NVS440 (2 GPUs, 2 outputs per GPU totalling 4 outputs); this works fine under Windows XP,7 but caused considerable headaches under Linux (Ubuntu 9.04). I had previously used an XFX 9600GT and the onboard XFX 9300GS to produce the same result but the card was noisy and power hungry and I was hoping that there was some magical switch in the NVS4400 that got rid of this annoying problem - turns out the NVS440 is just 2 cards on one physical PCB :-p (I searched the net high and low for people using this card under Linux but found nothing, if anything the card uses less power and is fan less so I was to benefit from it either way) Anyway, using either set up there were 5 solutions available: Have 3 separate X instances, all un joined Have 3 separate X instances, adjoined by Xinerama Have 2 separate X instances - One using twin-view, both adjoined by Xinerama Have 2 separate X instances - One using twin-view but no Xinerama Have a single Twin-view setup and leave the 3rd screen unplugged :-p The 4rd option, using 2 separate X instances and twinview (but no xinerama) was the best balance in terms of performance and usability but caused 2 really annoying issues You couldn't control (without altering the shortcuts) which screen an application opened onto - and once it was opened you couldn't move it to another screen without opening up terminal and forcing it to move Nvidia's overriding or falsifying of Xinerama breaks and the 2 screens joined by Twin view behave like a single huge screen causing popups to open in the middle of both screens and maximising of windows stretches to the width of the first 2 screens Firefox can only run one instance as the same user so having multiple firefox windows requires at least 2 users The second option "feels" like the right option, but OpenGL is basically disabled and playing any sort of game or even running anything graphical causes a huge performance drop and instability - even trying to run a basic emulator for gba or gens just causes the system to fall over. It works just enough to stare at your desktop and do nothing but as soon as you start doing some work - opening windows, dragging things around - running multiple copies of firefox it just really feels slow. The last open, only going dual screen works perfectly and everything performs as required, full GPU acceleration - two logical screen spaces - perfect, just make it work across GPUs like windows! :-p Anyway, I know RandR was supposed to pick up the slack when it would introduced GPU objects of sorts to allow multiple GPUs to be stitched together to create one huge desktop at a much deeper layer than Xinerama. I was wondering if this has now been fixed (I noticed X server 1.7 is out) and whether anyone has got it running successfully? Again, my requirements are: One huge desktop to drag any window across Maximising of windows to each screen (as XP does) Running fullscreen apps on the primary screen and disabling the mouse from moving onto the others or on all 3 stretched Finally as a side note; I am aware of the Matrox triple (and dual) head splitter but even the price they go for on eBay is more than I can afford atm, my argument: I shouldn't have to buy extra hardware to get something to work on Linux when it's something that's existed in the windows world for a long time (can you tell I don't get on with X :-p); If I had the cash I'd have bought the latest version of this box already (the new version finally supports large resolutions as the displays I have 1680x1050 each).

  Read the article

• Printer offline until spooler service is restarted multiple times

  - by Zian Choy

  When I try to print from my ThinkPad to a printer shared through a Windows 7 Homegroup hosted by a desktop computer, I often have to restart the Print Spooler service several times before the job will go through. In particular, this problem occurs when the desktop is in sleep mode when the print job is started and then brought out of sleep mode after the print job has been kicked off. Both computers are running Windows 7 32-bit edition with the latest patches. I have tried the following with no improvement: SNMP registry hack (see MS KB for details) Following the instructions in a blog post entitled "Sharing Printers on Vista 64-bit" Looking at Printer offline until spooler service is restarted

  Read the article

• Pointcast Alternatives?

  - by kellyllek

  I used to love Pointcast in the early days of the internet; it was a screensaver that, like RSS feeds, brought in all your favorite sources with news articles and stock quotes along with various other info and turned it into a visually interesting screensaver. It was before broadband though and I heard so many work places had to ban it that the company eventually folded. But I wondered if there are any modern day equivalents? I certainly have feed readers and some awesome desktop gadgets that bring in various things like news and weather, and I don't want a whole screensaver like pointcast. But I wondered if anyone out there had other suggestions worth taking a look at; making some kind of feed display of interest, or some other way to turn favorite content into more animated desktop background, etc...

  Read the article

• Do you know of any ways to effectively manage a triple screen setup brightness?

  - by nizm0

  I use a desktop with multiple monitors I have tried F.lux and it is a great app for changing the color from 3500k-6500k... but doesn't adjust screen brightness. (I recommend you try it) I've googled for hours trying to find an app that will work to let me easily manage screen brightness either by a "dim when idle" or a dynamically updating screen brightness based on the time of day. Windows 7 desktop doesn't seem to have options for me to adjust brightness on the system, and manually changing three separate monitors is too much of a chore? Anybody have some recommendations? Perhaps a way to script this, knowledge of how to use the supposed dynamic screen brightness functions that Windows was supposed to add in Windows 7?

  Read the article

• Reverse SCP over SSH connection

  - by pavpanchekha

  I pretty often need some file from some server when I'm on my laptop. But if I don't know where that file is, I have to ssh into the server, look around, exit, and then scp server:file .. If I'm working with my desktop and my server, both of which have static IPs, I can just SCP the file in reverse (scp desktop:~ file), but I can't do that for my laptop. Is there any nice way to SCP a file backwards over an SSH connection? So that the computer I connect to with SSH sends a file backwards to the client?

  Read the article

• Leave Windows Session Logged On

  - by Kyle Brandt

  Is a bad idea for any reason to leave accounts logged onto Windows remote desktop sessions? So instead of logging off, just closing the session so it locks. In this case, the limited number of remote desktop connections is not an issue. I am just wondering if anyone has seen sessions leak memory over time or maybe security issues with doing this, etc... I could see if programs were left open they might suck up and or leak memory, but has anyone seen this with Microsoft software such as Control Panels, Management Consoles, and Exchange System Administrator?

  Read the article

• How to remove leading whitespace from file and folder names?

  - by timoto

  How to remove leading whitespace from file and folder names? (I'm running OS X 10.6 Snow Leopard.) As provided below by @Lri I was able to remove trailing whitespace using this: #!/bin/bash IFS=$'\n' for d in {1..9}; do find ~/Desktop -name '* ' -depth $d | while read f; do mv "$f" "$(sed 's/ *$//' <<< "$f")" done done Now I'm trying to remove leading whitespace with this: #!/bin/bash IFS=$'\n' for d in {1..9}; do find ~/Desktop -name '* ' -depth $d | while read f; do mv "$f" "$(sed 's/^ *//;s/ *$//' <<< "$f")" done done but it doesn't work. What am I doing wrong?

  Read the article

• Network with bridge and port forwarding?

  - by rafek

  Hi! Below is my current (and planned) home network configuration. I would like to connect my non-wifi-capable desktop to my home network. The question is: HOW? What device do I need? The primary requiremen is that I need to be able to forward ports to my desktop. How would I achieve this? Is there something like "double port forwarding"? Could anyone please explain this configuration to me? Thank you in advance!

  Read the article

• How do I lower idle cpu usage in ubuntu linux? Gnome or KDE Variants

  - by Jasen

  My question comes from a kde desktop currently, but it also happens with the gnome instance. When just sitting there, with only the cpu monitor widget running. no open windows, no background processes other than the desktop, my cpu is at ~20%. I wanna know how to fix this, and possibly get better performance out of it. When running my windows side, the cpu will sit at zero, and i generally load new programs about 400ms faster. With windows 7 being as slow as it is, this is not acceptable. and the widget is only set to check every 500ms, so im almost completely sure its not the widget. My system is a Gateway nv 53 amd 2.0 ghz turion with 4 gb of installed ram, and 500 gb hd. both linux and windows are 64 bit. average ram use on either system is about 1.4 gb for just the os

  Read the article

• What's a fast way to copy a lot of files from an internal hard-drive to external (USB) storage?

  - by jonathanconway

  I have a large amount of data - about 500 GB - on the internal hard drive of a desktop PC. This includes music, videos, PDFs... you name it. I want to copy everything to an external USB hard drive (1.5 tb capacity). The desktop PC runs Ubuntu. To being with, I simply plugged in and mounted the hard drive and dragged the top-level folder onto the drive. It's started copying, but it seems to be proceeding very slowly. About 10 minutes later and it's only done about 500 MB. I'm sure this is slower than what I could achieve with less total data. So I'm wondering if there's a quicker way of doing this. Would it be better to copy it in portions of 500MB or so, rather than all at once?

  Read the article

• Launch apps or run commands on Windows via shortcuts

  - by Francisc

  Is it possible to register shortcuts on Windows 7 so that regardless where you are looking (Desktop, a folder etc) the shortcut gets "heard" and the appropriate action is performed. For example, creating a shortcut in the System32 folder which will work if you use Run with the shortcut's name, will not work if you set a key combination when focus is set on the Desktop for example. Is there a native way of registering top-level shortcuts or even an application for enabling this? Example of things I want keyboard shortcuts for: open a specific folder like %path% create a new .js file in the current folder launch an application eventually with its path set to the current location if the app supports this (e.g. command prompt) Thank you.

  Read the article

• upgrading ram to something faster

  - by Mike

  Im going to be adding more ram to a desktop is it poss to go from ddr2 667mhz pc2-5300 to something faster

  Read the article

• backup, sync and search files over internet and intranet

  - by Cawas

  There are many online backup options out there. Dropbox, Sugarsync, Mozy, Carbonite, Jungledisk and my favorite so far, Crashplan. Some of them allow searching, all of them sync with their online servers, none of those (or many many others I didn't listed here) have what I want. I'm _not_ looking for an online backup service in here. Sure, some people might say "use rsync", "linux" and/or "set up apache" and so on... But that's just too much for maintenance, if it's even viable of building up. It needs to be simple. So, anyone knows of a really good solution out there? Picture mostly Google Desktop Search (or quick search) awesome searching, mixed with Crashplan Desktop, which is able to do everything by itself, and something like Dropbox's file versioning, along with dropbox the ability to seamless sync over intranet and internet like crashplan, switching between them when needed. I bet there's nothing like this yet, but well, I'm not sure. It would be great!

  Read the article

• "ant" is not recognized as command in Windows

  - by user1294663

  This is my first time developing Android applications. I'm developing an Android app on Eclipse on Windows 7. I would like to run the Android app from the Windows 7 command line interface. I have my Android device connected to the PC. The workspace directory that I use to store the Android project is C:\Users\Guest\Desktop\Software Applications Development\Java\Android Moblie Applications Projects\Eclipse Indigo for Java EE x64-bit\project workspace I opened the command line interface and I changed the working directory to the Android workspace directory. cd C:\Users\Guest\Desktop\Software Applications Development\Java\Android Moblie Applications Projects\Eclipse Indigo for Java EE x64-bit\project workspace I included Android sdk platform tools directory into the PATH environment variable. c:\Users\admin\Android-sdks\platform-tools Then I entered this into the Windows 7 command line interface: ant debug I have this error message on the cmd: ant is not recognised as an internal or external command, operatable program or batch file. What is the solution to this problem?

  Read the article

• Is there any way I can use two monitors in the console in Linux?

  - by Alex

  I have recently become the proud owner of two monitors in my workspace. (Ok not owner, but you know what I mean) and I'd like to use both of them at once. Problem is, I much much prefer to use a Linux Server console over a desktop environment. The graphics card on the machine is a GTX295 (don't ask why, it's a long story.) so I essentially have two graphics cards. Each has a DVI output. Is there any way I can get the console to stretch across two screens? Or will I have to install a desktop Ubuntu for this to work?

  Read the article

• Windows XP/Firewall -- Can't open UDP port 9100 for JetDirect sharing

  - by Barton Chittenden

  I'm setting up my Dad's laptop (Vista) to print to an HP Deskjet printer attached to a Windows XP Desktop box. The XP box is running Windows firewall. Laptop sits on 192.168.1.66, Desktop 192.168.1.65. I set up logging in the firewall, and determined that it is dropping inbound packets on TCP port 9100, used by JetDirect, the printing protocol. I set up an exception on TCP port 9100, allowing access to the local subnet. There's also an entry under the 'allow applications' tab which was marked for the exact printer model. I selected this as well, then tried to print again... I see more dropped packets from 192.168.1.66 to 192.168.1.65 for TCP port 9100. What do I try next?

  Read the article

• After installing Ubuntu how do I get rid of unity and go back to gnome?

  - by aseq

  After I have installed the newest Ubuntu LTS release (12.04, still in beta though) I am greeted with an unfamiliar and difficult to use desktop environment. I believe it is called unity. However I have used gnome for a decade and a half and I would not like to move to this new and (for me) unusable desktop environment. What is a quick and easy way to remove (most) of unity and bring back gnome, as well as configure my display manager to load gnome by default with the environment as close as possible to the way it was before?

  Read the article

• Black screen after scheduled resume from sleep

  - by macbirdie

  I have a problem with my two Windows 7 setups at home. Whenever a scheduled task wakes up the machines from sleep, a black screen with a mouse cursor appears. If I move the mouse or press any key, desktop appears. The biggest problem is that during that black screen phase the display, sometimes even the PC too, doesn't go to stand by after a set period of time in power settings. If I get the desktop to show up, standby functions work fine. Display goes blank after a few minutes and as soon as the task doesn't need the PC, it goes back to sleep. It's frustrating that this "feature" is wasting energy and keeps lighting up the pc in the middle of the night for me to find it that way after I wake up. I found a handful of threads on the intertubes about the issue, but there were no answers in any of them. It sometimes happens in my XP machine at work as well.

  Read the article

• Why is Windows 7 so slow to log-on when my Wireless USB dongle is plugged in?

  - by Sam

  I'm using an Edimax Wireless USB dongle (model EW-7711UTN) on Windows 7 64-bit. The dongle works brilliantly (it was truly plug-and-play) except for one thing. I've noticed that if the dongle is plugged in whilst I'm logging on to Windows it introduces a massive delay - after I type in my password and hit enter, Windows shows the "Welcome" screen, then the screen goes black for 2 minutes or so (with just the cursor showing) before finally displaying my desktop. If I unplug the dongle before I enter my password, Windows goes straight to my desktop. Even though the dongle didn't appear to need drivers for Windows 7, I did try downloading the latest ones from the Edimax website, but that made no difference.

  Read the article

• Enabling Compiz Viewport Switcher key bindings

  - by David Moles

  I'm running compiz 0.8.2 with compizconfig on Scientific Linux 6.2 with Gnome 2.28.2. In the compizconfig "General Options" I have "Desktop Size" set as follows: Horizontal Virtual Size: 6 Vertical Virtual Size: 1 Number of Desktops: 1 This gets me the layout I want, i.e. 6 workspaces in a horizontal layout. Ctrl-alt-cursor-keys work fine for switching between them. However, I can't figure out how to get key bindings for specific workspaces. I've tried enabling "Viewport Switcher" in compizconfig, and tried various combinations both in "Number-based viewport switching" and "Go to specific viewport", to no apparent effect. My first thought was that something else was eating the specific key bindings I chose, but I think I've tried every combination of shift, control, alt and super (i.e., the Windows key) by now. I tried setting 6 desktops under "General Options" instead of one desktop with horizontal virtual size 6, but that doesn't seem to make a difference either. What am I missing?

  Read the article

• How to use psexec without admin privileges on target machine?

  - by HighCommander4

  Is it possible to use psexec to execute a command on a remote machine without having admin privileges on the remote machine? I tried running psexec \\<machine> -u <username> -p <password>, where <username> and <password> are non-admin credentials, but I get an "access denied" error I can remote desktop into the remote machine with the same credentials without any problems. My local machine is running Windows 7 Enterprise 64-bit, and the remote machine is running Windows Server 2008 64-bit. I do have admin privileges on the local machine. EDIT: To all the people who are downvoting this question: I am not trying to circumvent any sort of security measure. I can already run the process on the remote machine by remote desktop-ing into the remote machine and running it. I'm simply looking for a command-line way to do something I can already do through a GUI.

  Read the article

• Shuttle FB51 mobo does not boot with external USB drive attached [closed]

  - by user127236

  I am repurposing an old Alienware desktop as a home media server. The PC is based on the Shuttle FB51 motherboard. The BIOS is a Phoenix Version 6.00 PG, release date 12/16/2002. I have loaded Ubuntu 12.04 LTS on the internal hard drive. I am using a Western Digital WD Elements 1.5 TB USB 2.0 Desktop External Hard Drive for media storage. When the external drive is plugged in and the PC is powered on, it freezes very early in the BIOS self-test, even before it begins the memory test. If I unplug the drive, the self-test proceeds without further problems. I can plug the USB drive back in when the self-test is complete, and Ubuntu will boot and find the external drive normally. I've tried several changes to the BIOS setup without finding a cure for the boot issue. Any assistance gratefully accepted. JGB

  Read the article

< Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >