Search Results

Search found 5957 results on 239 pages for 'suggest'.

Page 229/239 | < Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >

  • CEN/CENELEC Lacks Perspective

    - by trond-arne.undheim
    Over the last few months, two of the European Standardization Organizations (ESOs), CEN and CENELEC have circulated an unfortunate position statement distorting the facts around fora and consortia. For the benefit of outsiders to this debate, let's just say that this debate regards whether and how the EU should recognize standards and specifications from certain fora and consortia based on a process evaluating the openness and transparency of such deliverables. The topic is complex, and somewhat confusing even to insiders, but nevertheless crucial to the European economy. As far as I can judge, their positions are not based on facts. This is unfortunate. For the benefit of clarity, here are some of the observations they make: a)"Most consortia are in essence driven by technology companies making hardware and software solutions, by definition very few of the largest ones are European-based". b) "Most consortia lack a European presence, relevant Committees, even those that are often cited as having stronger links with Europe, seem to lack an overall, inclusive set of participants". c) "Recognising specific consortia specifications will not resolve any concrete problems of interoperability for public authorities; interoperability depends on stringing together a range of specifications (from formal global bodies or consortia alike)". d) "Consortia already have the option to have their specifications adopted by the international formal standards bodies and many more exercise this than the two that seem to be campaigning for European recognition. Such specifications can then also be adopted as European standards." e) "Consortium specifications completely lack any process to take due and balanced account of requirements at national level - this is not important for technologies but can be a critical issue when discussing cross-border issues within the EU such as eGovernment, eHealth and so on". f) "The proposed recognition will not lead to standstill on national or European activities, nor to the adoption of the specifications as national standards in the CEN and CENELEC members (usually in their official national languages), nor to withdrawal of conflicting national standards. A big asset of the European standardization system is its coherence and lack of fragmentation." g) "We always miss concrete and specific examples of where consortia referencing are supposed to be helpful." First of all, note that ETSI, the third ESO, did not join the position. The reason is, of course, that ETSI beyond being an ESO, also has a global perspective and, moreover, does consider reality. Secondly, having produced arguments a) to g), CEN/CENELEC has the audacity to call a meeting on Friday 25 February entitled "ICT standardization - improving collaboration in Europe". This sounds very nice, but they have not set the stage for constructive debate. Rather, they demonstrate a striking lack of vision and lack of perspective. I will back this up by three facts, and leave it there. 1. Since the 1980s, global industry fora and consortia, such as IETF, W3C and OASIS have emerged as world-leading ICT standards development organizations with excellent procedures for openness and transparency in all phases of standards development, ex post and ex ante. - Practically no ICT system can be built without using fora and consortia standards (FCS). - Without using FCS, neither the Internet, upon which the EU economy depends, nor EU institutions would operate. - FCS are of high relevance for achieving and promoting interoperability and driving innovation. 2. FCS are complementary to the formally recognized standards organizations including the ESOs. - No work will be taken away from the ESOs should the EU recognize certain FCS. - Each FCS would be evaluated on its merit and on the openness of the process that produced it. ESOs would, with other stakeholders, have a say. - ESOs could potentially educate and assist European stakeholders to engage more actively and constructively with FCS. - ETSI, also an ESO, seems to clearly recognize these facts. 3. Europe and its Member States have a strong voice in several of the most relevant global industry fora and consortia. - W3C: W3C was founded in 1994 by an Englishman, Sir Tim Berners-Lee, in collaboration with CERN, the European research lab. In April 1995, INRIA (Institut National de Recherche en Informatique et Automatique) in France became the first European W3C host and in 2003, ERCIM (European Research Consortium in Informatics and Mathematics), also based in France, took over the role of European W3C host from INRIA. Today, W3C has 326 Members, 40% of which are European. Government participation is also strong, and it could be increased - a development that is very much desired by W3C. Current members of the W3C Advisory Board includes Ora Lassila (Nokia) and Charles McCathie Nevile (Opera). Nokia is Finnish company, Opera is a Norwegian company. SAP's Claus von Riegen is an alumni of the same Advisory Board. - OASIS: its membership - 30% of which is European - represents the marketplace, reflecting a balance of providers, user companies, government agencies, and non-profit organizations. In particular, about 15% of OASIS members are governments or universities. Frederick Hirsch from Nokia, Claus von Riegen from SAP AG and Charles-H. Schulz from Ars Aperta are on the Board of Directors. Nokia is a Finnish company, SAP is a German company and Ars Aperta is a French company. The Chairman of the Board is Peter Brown, who is an Independent Consultant, an Austrian citizen AND an official of the European Parliament currently on long-term leave. - IETF: The oversight of its activities is by the Internet Architecture Board (IAB), since 2007 chaired by Olaf Kolkman, a Dutch national who lives in Uithoorn, NL. Kolkman is director of NLnet Labs, a foundation chartered to develop open source software and open source standards for the Internet. Other IAB members include Marcelo Bagnulo whose affiliation is the University Carlos III of Madrid, Spain as well as Hannes Tschofenig from Nokia Siemens Networks. Nokia is a Finnish company. Siemens is a German company. Nokia Siemens is a European joint venture. - Member States: At least 17 European Member States have developed Interoperability Frameworks that include FCS, according to the EU-funded National Interoperability Framework Observatory (see list and NIFO web site on IDABC). This also means they actively procure solutions using FCS, reference FCS in their policies and even in laws. Member State reps are free to engage in FCS, and many do. It would be nice if the EU adjusted to this reality. - A huge number of European nationals work in the global IT industry, on European soil or elsewhere, whether in EU registered companies or not. CEN/CENELEC lacks perspective and has engaged in an effort to twist facts that is quite striking from a publicly funded organization. I wish them all possible success with Friday's meeting but I fear all of the most important stakeholders will not be at the table. Not because they do not wish to collaborate, but because they just have been insulted. If they do show up, it would be a gracious move, almost beyond comprehension. While I do not expect CEN/CENELEC to line up perfectly in favor of fora and consortia, I think it would be to their benefit to stick to more palatable observations. Actually, I would suggest an apology, straightening out the facts. This works among friends and it works in an organizational context. Then, we can all move on. Standardization is important. Too important to ignore. Too important to distort. The European economy depends on it. We need CEN/CENELEC. It is an important organization. But CEN/CENELEC needs fora and consortia, too.

    Read the article

  • T-SQL Tuesday #31 - Logging Tricks with CONTEXT_INFO

    - by Most Valuable Yak (Rob Volk)
    This month's T-SQL Tuesday is being hosted by Aaron Nelson [b | t], fellow Atlantan (the city in Georgia, not the famous sunken city, or the resort in the Bahamas) and covers the topic of logging (the recording of information, not the harvesting of trees) and maintains the fine T-SQL Tuesday tradition begun by Adam Machanic [b | t] (the SQL Server guru, not the guy who fixes cars, check the spelling again, there will be a quiz later). This is a trick I learned from Fernando Guerrero [b | t] waaaaaay back during the PASS Summit 2004 in sunny, hurricane-infested Orlando, during his session on Secret SQL Server (not sure if that's the correct title, and I haven't used parentheses in this paragraph yet).  CONTEXT_INFO is a neat little feature that's existed since SQL Server 2000 and perhaps even earlier.  It lets you assign data to the current session/connection, and maintains that data until you disconnect or change it.  In addition to the CONTEXT_INFO() function, you can also query the context_info column in sys.dm_exec_sessions, or even sysprocesses if you're still running SQL Server 2000, if you need to see it for another session. While you're limited to 128 bytes, one big advantage that CONTEXT_INFO has is that it's independent of any transactions.  If you've ever logged to a table in a transaction and then lost messages when it rolled back, you can understand how aggravating it can be.  CONTEXT_INFO also survives across multiple SQL batches (GO separators) in the same connection, so for those of you who were going to suggest "just log to a table variable, they don't get rolled back":  HA-HA, I GOT YOU!  Since GO starts a new batch all variable declarations are lost. Here's a simple example I recently used at work.  I had to test database mirroring configurations for disaster recovery scenarios and measure the network throughput.  I also needed to log how long it took for the script to run and include the mirror settings for the database in question.  I decided to use AdventureWorks as my database model, and Adam Machanic's Big Adventure script to provide a fairly large workload that's repeatable and easily scalable.  My test would consist of several copies of AdventureWorks running the Big Adventure script while I mirrored the databases (or not). Since Adam's script contains several batches, I decided CONTEXT_INFO would have to be used.  As it turns out, I only needed to grab the start time at the beginning, I could get the rest of the data at the end of the process.   The code is pretty small: declare @time binary(128)=cast(getdate() as binary(8)) set context_info @time   ... rest of Big Adventure code ...   go use master; insert mirror_test(server,role,partner,db,state,safety,start,duration) select @@servername, mirroring_role_desc, mirroring_partner_instance, db_name(database_id), mirroring_state_desc, mirroring_safety_level_desc, cast(cast(context_info() as binary(8)) as datetime), datediff(s,cast(cast(context_info() as binary(8)) as datetime),getdate()) from sys.database_mirroring where db_name(database_id) like 'Adv%';   I declared @time as a binary(128) since CONTEXT_INFO is defined that way.  I couldn't convert GETDATE() to binary(128) as it would pad the first 120 bytes as 0x00.  To keep the CAST functions simple and avoid using SUBSTRING, I decided to CAST GETDATE() as binary(8) and let SQL Server do the implicit conversion.  It's not the safest way perhaps, but it works on my machine. :) As I mentioned earlier, you can query system views for sessions and get their CONTEXT_INFO.  With a little boilerplate code this can be used to monitor long-running procedures, in case you need to kill a process, or are just curious  how long certain parts take.  In this example, I added code to Adam's Big Adventure script to set CONTEXT_INFO messages at strategic places I want to monitor.  (His code is in UPPERCASE as it was in the original, mine is all lowercase): declare @msg binary(128) set @msg=cast('Altering bigProduct.ProductID' as binary(128)) set context_info @msg go ALTER TABLE bigProduct ALTER COLUMN ProductID INT NOT NULL GO set context_info 0x0 go declare @msg1 binary(128) set @msg1=cast('Adding pk_bigProduct Constraint' as binary(128)) set context_info @msg1 go ALTER TABLE bigProduct ADD CONSTRAINT pk_bigProduct PRIMARY KEY (ProductID) GO set context_info 0x0 go declare @msg2 binary(128) set @msg2=cast('Altering bigTransactionHistory.TransactionID' as binary(128)) set context_info @msg2 go ALTER TABLE bigTransactionHistory ALTER COLUMN TransactionID INT NOT NULL GO set context_info 0x0 go declare @msg3 binary(128) set @msg3=cast('Adding pk_bigTransactionHistory Constraint' as binary(128)) set context_info @msg3 go ALTER TABLE bigTransactionHistory ADD CONSTRAINT pk_bigTransactionHistory PRIMARY KEY NONCLUSTERED(TransactionID) GO set context_info 0x0 go declare @msg4 binary(128) set @msg4=cast('Creating IX_ProductId_TransactionDate Index' as binary(128)) set context_info @msg4 go CREATE NONCLUSTERED INDEX IX_ProductId_TransactionDate ON bigTransactionHistory(ProductId,TransactionDate) INCLUDE(Quantity,ActualCost) GO set context_info 0x0   This doesn't include the entire script, only those portions that altered a table or created an index.  One annoyance is that SET CONTEXT_INFO requires a literal or variable, you can't use an expression.  And since GO starts a new batch I need to declare a variable in each one.  And of course I have to use CAST because it won't implicitly convert varchar to binary.  And even though context_info is a nullable column, you can't SET CONTEXT_INFO NULL, so I have to use SET CONTEXT_INFO 0x0 to clear the message after the statement completes.  And if you're thinking of turning this into a UDF, you can't, although a stored procedure would work. So what does all this aggravation get you?  As the code runs, if I want to see which stage the session is at, I can run the following (assuming SPID 51 is the one I want): select CAST(context_info as varchar(128)) from sys.dm_exec_sessions where session_id=51   Since SQL Server 2005 introduced the new system and dynamic management views (DMVs) there's not as much need for tagging a session with these kinds of messages.  You can get the session start time and currently executing statement from them, and neatly presented if you use Adam's sp_whoisactive utility (and you absolutely should be using it).  Of course you can always use xp_cmdshell, a CLR function, or some other tricks to log information outside of a SQL transaction.  All the same, I've used this trick to monitor long-running reports at a previous job, and I still think CONTEXT_INFO is a great feature, especially if you're still using SQL Server 2000 or want to supplement your instrumentation.  If you'd like an exercise, consider adding the system time to the messages in the last example, and an automated job to query and parse it from the system tables.  That would let you track how long each statement ran without having to run Profiler. #TSQL2sDay

    Read the article

  • CodePlex Daily Summary for Sunday, June 01, 2014

    CodePlex Daily Summary for Sunday, June 01, 2014Popular ReleasesSandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...Tooltip Web Preview: ToolTip Web Preview: Version 1.0Database Helper: Release 1.0.0.0: First Release of Database HelperCoMaSy: CoMaSy1.0.2: !Contact Management SystemImage View Slider: Image View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. We wish somebody to improve freely. Try this out! Author : Steven Renaldo Antony Yustinus Arjuna Purnama Putra Andre Wijaya P Martin Lidau PBK GENAP 2014 - TI UKDWAspose for Apache POI: Missing Features of Apache POI WP - v 1.1: Release contain the Missing Features in Apache POI WP SDK in Comparison with Aspose.Words for dealing with Microsoft Word. What's New ?Following Examples: Insert Picture in Word Document Insert Comments Set Page Borders Mail Merge from XML Data Source Moving the Cursor Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: V1.5.6.0: V1.5.6.0 - 2014.5.30New feature: support quick-cocos2d-x project now; support text search in scripts folder now, you can use this function in Search Result Window;SEToolbox: 01.032.014 Release 1: Added fix when loading game Textures for icons causing 'Unable to read beyond the end of the stream'. Added new Resource Report, that displays all in game resources in a concise report. Added in temp directory cleaner, to keep excess files from building up. Fixed use of colors on the windows, to work better with desktop schemes. Adding base support for multilingual resources. This will allow loading of the Space Engineers resources to show localized names, and display localized date a...ClosedXML - The easy way to OpenXML: ClosedXML 0.71.2: More memory and performance improvements. Fixed an issue with pivot table field order.Fancontroller: Fancontroller: Initial releaseVi-AIO SearchBar: Vi – AIO Search Bar: Version 1.0Top Verses ( Ayat Emas ): Binary Top Verses: This one is the bin folder of the component. the .dll component is inside.Traditional Calendar Component: Traditional Calender Converter: Duta Wacana Christian University This file containing Traditional Calendar Component and Demo Aplication that using Traditional Calendar Component. This component made with .NET Framework 4 and the programming language is C# .SQLSetupHelper: 1.0.0.0: First Stable Version of SQL SetupComposite Iconote: Composite Iconote: This is a composite has been made by Microsoft Visual Studio 2013. Requirement: To develop this composite or use this component in your application, your computer must have .NET framework 4.5 or newer.Magick.NET: Magick.NET 6.8.9.101: Magick.NET linked with ImageMagick 6.8.9.1. Breaking changes: - Int/short Set methods of WritablePixelCollection are now unsigned. - The Q16 build no longer uses HDRI, switch to the new Q16-HDRI build if you need HDRI.fnr.exe - Find And Replace Tool: 1.7: Bug fixes Refactored logic for encoding text values to command line to handle common edge cases where find/replace operation works in GUI but not in command line Fix for bug where selection in Encoding drop down was different when generating command line in some cases. It was reported in: https://findandreplace.codeplex.com/workitem/34 Fix for "Backslash inserted before dot in replacement text" reported here: https://findandreplace.codeplex.com/discussions/541024 Fix for finding replacing...VG-Ripper & PG-Ripper: VG-Ripper 2.9.59: changes NEW: Added Support for 'GokoImage.com' links NEW: Added Support for 'ViperII.com' links NEW: Added Support for 'PixxxView.com' links NEW: Added Support for 'ImgRex.com' links NEW: Added Support for 'PixLiv.com' links NEW: Added Support for 'imgsee.me' links NEW: Added Support for 'ImgS.it' linksToolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2014.5.28): XrmToolbox improvement XrmToolBox updates (v1.2014.5.28)Fix connecting to a connection with custom authentication without saved password Tools improvement New tool!Solution Components Mover (v1.2014.5.22) Transfer solution components from one solution to another one Import/Export NN relationships (v1.2014.3.7) Allows you to import and export many to many relationships Tools updatesAttribute Bulk Updater (v1.2014.5.28) Audit Center (v1.2014.5.28) View Layout Replicator (v1.2014.5.28) Scrip...Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.10: Fix for Issue #20875 - echo switch doesn't work for CSS CSS should honor the SASS source-file comments JS should allow multi-line comment directivesNew ProjectsCet MicroWPF: WPF-like library for simple graphic-UI application using Netduino (Plus) 2 and the FTDI FT800 Eve board.Fakemons: Some Fakmons, powered by XML, XSLT, CSS and JavascriptFling OS: Fling OS is a C# operating system project aiming to create a new, managed operating system from the ground up.MudRoom: Experimental tool sets in mud parsing and area definitionOOP-2112110158: My name's NgocDungRoslynResearch: Roslyn ResearchTHD - Control de Usuarios: control de usuarios y permisosWPF Kinect User Controls: WPF Kinect User Control project provide simple Tilt and Skeleton Tracking Parameter Controls.

    Read the article

  • Writing to XML issue Unity3D C#

    - by N0xus
    I'm trying to create a tool using Unity to generate an XML file for use in another project. Now, please, before someone suggests I do it in something, the reason I am using Unity is that it allows me to easily port this to an iPad or other device with next to no extra development. So please. Don't suggest to use something else. At the moment, I am using the following code to write to my XML file. public void WriteXMLFile() { string _filePath = Application.dataPath + @"/Data/HV_DarkRideSettings.xml"; XmlDocument _xmlDoc = new XmlDocument(); if (File.Exists(_filePath)) { _xmlDoc.Load(_filePath); XmlNode rootNode = _xmlDoc.CreateElement("Settings"); // _xmlDoc.AppendChild(rootNode); rootNode.RemoveAll(); XmlElement _cornerNode = _xmlDoc.CreateElement("Screen_Corners"); _xmlDoc.DocumentElement.PrependChild(_cornerNode); #region Top Left Corners XYZ Values // indent top left corner value to screen corners XmlElement _topLeftNode = _xmlDoc.CreateElement("Top_Left"); _cornerNode.AppendChild(_topLeftNode); // set the XYZ of the top left values XmlElement _topLeftXNode = _xmlDoc.CreateElement("TopLeftX"); XmlElement _topLeftYNode = _xmlDoc.CreateElement("TopLeftY"); XmlElement _topLeftZNode = _xmlDoc.CreateElement("TopLeftZ"); // indent these values to the top_left value in XML _topLeftNode.AppendChild(_topLeftXNode); _topLeftNode.AppendChild(_topLeftYNode); _topLeftNode.AppendChild(_topLeftZNode); #endregion #region Bottom Left Corners XYZ Values // indent top left corner value to screen corners XmlElement _bottomLeftNode = _xmlDoc.CreateElement("Bottom_Left"); _cornerNode.AppendChild(_bottomLeftNode); // set the XYZ of the top left values XmlElement _bottomLeftXNode = _xmlDoc.CreateElement("BottomLeftX"); XmlElement _bottomLeftYNode = _xmlDoc.CreateElement("BottomLeftY"); XmlElement _bottomLeftZNode = _xmlDoc.CreateElement("BottomLeftZ"); // indent these values to the top_left value in XML _bottomLeftNode.AppendChild(_bottomLeftXNode); _bottomLeftNode.AppendChild(_bottomLeftYNode); _bottomLeftNode.AppendChild(_bottomLeftZNode); #endregion #region Bottom Left Corners XYZ Values // indent top left corner value to screen corners XmlElement _bottomRightNode = _xmlDoc.CreateElement("Bottom_Right"); _cornerNode.AppendChild(_bottomRightNode); // set the XYZ of the top left values XmlElement _bottomRightXNode = _xmlDoc.CreateElement("BottomRightX"); XmlElement _bottomRightYNode = _xmlDoc.CreateElement("BottomRightY"); XmlElement _bottomRightZNode = _xmlDoc.CreateElement("BottomRightZ"); // indent these values to the top_left value in XML _bottomRightNode.AppendChild(_bottomRightXNode); _bottomRightNode.AppendChild(_bottomRightYNode); _bottomRightNode.AppendChild(_bottomRightZNode); #endregion _xmlDoc.Save(_filePath); } } This generates the following XML file: <Settings> <Screen_Corners> <Top_Left> <TopLeftX /> <TopLeftY /> <TopLeftZ /> </Top_Left> <Bottom_Left> <BottomLeftX /> <BottomLeftY /> <BottomLeftZ /> </Bottom_Left> <Bottom_Right> <BottomRightX /> <BottomRightY /> <BottomRightZ /> </Bottom_Right> </Screen_Corners> </Settings> Which is exactly what I want. However, each time I press the button that has the WriteXMLFile() method attached to it, it's write the entire lot again. Like so: <Settings> <Screen_Corners> <Top_Left> <TopLeftX /> <TopLeftY /> <TopLeftZ /> </Top_Left> <Bottom_Left> <BottomLeftX /> <BottomLeftY /> <BottomLeftZ /> </Bottom_Left> <Bottom_Right> <BottomRightX /> <BottomRightY /> <BottomRightZ /> </Bottom_Right> </Screen_Corners> <Screen_Corners> <Top_Left> <TopLeftX /> <TopLeftY /> <TopLeftZ /> </Top_Left> <Bottom_Left> <BottomLeftX /> <BottomLeftY /> <BottomLeftZ /> </Bottom_Left> <Bottom_Right> <BottomRightX /> <BottomRightY /> <BottomRightZ /> </Bottom_Right> </Screen_Corners> <Screen_Corners> <Top_Left> <TopLeftX /> <TopLeftY /> <TopLeftZ /> </Top_Left> <Bottom_Left> <BottomLeftX /> <BottomLeftY /> <BottomLeftZ /> </Bottom_Left> <Bottom_Right> <BottomRightX /> <BottomRightY /> <BottomRightZ /> </Bottom_Right> </Screen_Corners> </Settings> Now, I've written XML files before using winforms, and the WriteXMLFile function is exactly the same. However, in my winform, no matter how much I press the WriteXMLFile button, it doesn't write the whole lot again. Is there something that I'm doing wrong or should change to stop this from happening?

    Read the article

  • How to use Azure storage for uploading and displaying pictures.

    - by Magnus Karlsson
    Basic set up of Azure storage for local development and production. This is a somewhat completion of the following guide from http://www.windowsazure.com/en-us/develop/net/how-to-guides/blob-storage/ that also involves a practical example that I believe is commonly used, i.e. upload and present an image from a user.   First we set up for local storage and then we configure for them to work on a web role. Steps: 1. Configure connection string locally. 2. Configure model, controllers and razor views.   1. Setup connectionsstring 1.1 Right click your web role and choose “Properties”. 1.2 Click Settings. 1.3 Add setting. 1.4 Name your setting. This will be the name of the connectionstring. 1.5 Click the ellipsis to the right. (the ellipsis appear when you mark the area. 1.6 The following window appears- Select “Windows Azure storage emulator” and click ok.   Now we have a connection string to use. To be able to use it we need to make sure we have windows azure tools for storage. 2.1 Click Tools –> Library Package manager –> Manage Nuget packages for solution. 2.2 This is what it looks like after it has been added.   Now on to what the code should look like. 3.1 First we need a view which collects images to upload. Here Index.cshtml. 1: @model List<string> 2:  3: @{ 4: ViewBag.Title = "Index"; 5: } 6:  7: <h2>Index</h2> 8: <form action="@Url.Action("Upload")" method="post" enctype="multipart/form-data"> 9:  10: <label for="file">Filename:</label> 11: <input type="file" name="file" id="file1" /> 12: <br /> 13: <label for="file">Filename:</label> 14: <input type="file" name="file" id="file2" /> 15: <br /> 16: <label for="file">Filename:</label> 17: <input type="file" name="file" id="file3" /> 18: <br /> 19: <label for="file">Filename:</label> 20: <input type="file" name="file" id="file4" /> 21: <br /> 22: <input type="submit" value="Submit" /> 23: 24: </form> 25:  26: @foreach (var item in Model) { 27:  28: <img src="@item" alt="Alternate text"/> 29: } 3.2 We need a controller to receive the post. Notice the “containername” string I send to the blobhandler. I use this as a folder for the pictures for each user. If this is not a requirement you could just call it container or anything with small characters directly when creating the container. 1: public ActionResult Upload(IEnumerable<HttpPostedFileBase> file) 2: { 3: BlobHandler bh = new BlobHandler("containername"); 4: bh.Upload(file); 5: var blobUris=bh.GetBlobs(); 6: 7: return RedirectToAction("Index",blobUris); 8: } 3.3 The handler model. I’ll let the comments speak for themselves. 1: public class BlobHandler 2: { 3: // Retrieve storage account from connection string. 4: CloudStorageAccount storageAccount = CloudStorageAccount.Parse( 5: CloudConfigurationManager.GetSetting("StorageConnectionString")); 6: 7: private string imageDirecoryUrl; 8: 9: /// <summary> 10: /// Receives the users Id for where the pictures are and creates 11: /// a blob storage with that name if it does not exist. 12: /// </summary> 13: /// <param name="imageDirecoryUrl"></param> 14: public BlobHandler(string imageDirecoryUrl) 15: { 16: this.imageDirecoryUrl = imageDirecoryUrl; 17: // Create the blob client. 18: CloudBlobClient blobClient = storageAccount.CreateCloudBlobClient(); 19: 20: // Retrieve a reference to a container. 21: CloudBlobContainer container = blobClient.GetContainerReference(imageDirecoryUrl); 22: 23: // Create the container if it doesn't already exist. 24: container.CreateIfNotExists(); 25: 26: //Make available to everyone 27: container.SetPermissions( 28: new BlobContainerPermissions 29: { 30: PublicAccess = BlobContainerPublicAccessType.Blob 31: }); 32: } 33: 34: public void Upload(IEnumerable<HttpPostedFileBase> file) 35: { 36: // Create the blob client. 37: CloudBlobClient blobClient = storageAccount.CreateCloudBlobClient(); 38: 39: // Retrieve a reference to a container. 40: CloudBlobContainer container = blobClient.GetContainerReference(imageDirecoryUrl); 41: 42: if (file != null) 43: { 44: foreach (var f in file) 45: { 46: if (f != null) 47: { 48: CloudBlockBlob blockBlob = container.GetBlockBlobReference(f.FileName); 49: blockBlob.UploadFromStream(f.InputStream); 50: } 51: } 52: } 53: } 54: 55: public List<string> GetBlobs() 56: { 57: // Create the blob client. 58: CloudBlobClient blobClient = storageAccount.CreateCloudBlobClient(); 59: 60: // Retrieve reference to a previously created container. 61: CloudBlobContainer container = blobClient.GetContainerReference(imageDirecoryUrl); 62: 63: List<string> blobs = new List<string>(); 64: 65: // Loop over blobs within the container and output the URI to each of them 66: foreach (var blobItem in container.ListBlobs()) 67: blobs.Add(blobItem.Uri.ToString()); 68: 69: return blobs; 70: } 71: } 3.4 So, when the files have been uploaded we will get them to present them to out user in the index page. Pretty straight forward. In this example we only present the image by sending the Uri’s to the view. A better way would be to save them up in a view model containing URI, metadata, alternate text, and other relevant information but for this example this is all we need.   4. Now press F5 in your solution to try it out. You can see the storage emulator UI here:     4.1 If you get any exceptions or errors I suggest to first check if the service Is running correctly. I had problem with this and they seemed related to the installation and a reboot fixed my problems.     5. Set up for Cloud storage. To do this we need to add configuration for cloud just as we did for local in step one. 5.1 We need our keys to do this. Go to the windows Azure menagement portal, select storage icon to the right and click “Manage keys”. (Image from a different blog post though).   5.2 Do as in step 1.but replace step 1.6 with: 1.6 Choose “Manually entered credentials”. Enter your account name. 1.7 Paste your Account Key from step 5.1. and click ok.   5.3. Save, publish and run! Please feel free to ask any questions using the comments form at the bottom of this page. I will get back to you to help you solve any questions. Our consultancy agency also provides services in the Nordic regions if you would like any further support.

    Read the article

  • SQL SERVER – Weekly Series – Memory Lane – #034

    - by Pinal Dave
    Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 UDF – User Defined Function to Strip HTML – Parse HTML – No Regular Expression The UDF used in the blog does fantastic task – it scans entire HTML text and removes all the HTML tags. It keeps only valid text data without HTML task. This is one of the quite commonly requested tasks many developers have to face everyday. De-fragmentation of Database at Operating System to Improve Performance Operating system skips MDF file while defragging the entire filesystem of the operating system. It is absolutely fine and there is no impact of the same on performance. Read the entire blog post for my conversation with our network engineers. Delay Function – WAITFOR clause – Delay Execution of Commands How do you delay execution of the commands in SQL Server – ofcourse by using WAITFOR keyword. In this blog post, I explain the same with the help of T-SQL script. Find Length of Text Field To measure the length of TEXT fields the function is DATALENGTH(textfield). Len will not work for text field. As of SQL Server 2005, developers should migrate all the text fields to VARCHAR(MAX) as that is the way forward. Retrieve Current Date Time in SQL Server CURRENT_TIMESTAMP, GETDATE(), {fn NOW()} There are three ways to retrieve the current datetime in SQL SERVER. CURRENT_TIMESTAMP, GETDATE(), {fn NOW()} Explanation and Comparison of NULLIF and ISNULL An interesting observation is NULLIF returns null if it comparison is successful, whereas ISNULL returns not null if its comparison is successful. In one way they are opposite to each other. Here is my question to you - How to create infinite loop using NULLIF and ISNULL? If this is even possible? 2008 Introduction to SERVERPROPERTY and example SERVERPROPERTY is a very interesting system function. It returns many of the system values. I use it very frequently to get different server values like Server Collation, Server Name etc. SQL Server Start Time We can use DMV to find out what is the start time of SQL Server in 2008 and later version. In this blog you can see how you can do the same. Find Current Identity of Table Many times we need to know what is the current identity of the column. I have found one of my developers using aggregated function MAX () to find the current identity. However, I prefer following DBCC command to figure out current identity. Create Check Constraint on Column Some time we just need to create a simple constraint over the table but I have noticed that developers do many different things to make table column follow rules than just creating constraint. I suggest constraint is a very useful concept and every SQL Developer should pay good attention to this subject. 2009 List Schema Name and Table Name for Database This is one of the blog post where I straight forward display script. One of the kind of blog posts, which I still love to read and write. Clustered Index on Separate Drive From Table Location A table devoid of primary key index is called heap, and here data is not arranged in a particular order, which gives rise to issues that adversely affect performance. Data must be stored in some kind of order. If we put clustered index on it then the order will be forced by that index and the data will be stored in that particular order. Understanding Table Hints with Examples Hints are options and strong suggestions specified for enforcement by the SQL Server query processor on DML statements. The hints override any execution plan the query optimizer might select for a query. 2010 Data Pages in Buffer Pool – Data Stored in Memory Cache One of my earlier year article, which I still read it many times and point developers to read it again. It is clear from the Resultset that when more than one index is used, datapages related to both or all of the indexes are stored in Memory Cache separately. TRANSACTION, DML and Schema Locks Can you create a situation where you can see Schema Lock? Well, this is a very simple question, however during the interview I notice over 50 candidates failed to come up with the scenario. In this blog post, I have demonstrated the situation where we can see the schema lock in database. 2011 Solution – Puzzle – Statistics are not updated but are Created Once In this example I have created following situation: Create Table Insert 1000 Records Check the Statistics Now insert 10 times more 10,000 indexes Check the Statistics – it will be NOT updated Auto Update Statistics and Auto Create Statistics for database is TRUE Now I have requested two things in the example 1) Why this is happening? 2) How to fix this issue? Selecting Domain from Email Address This is a straight to script blog post where I explain how to select only domain name from entire email address. Solution – Generating Zero Without using Any Numbers in T-SQL How to get zero digit without using any digit? This is indeed a very interesting question and the answer is even interesting. Try to come up with answer in next 10 minutes and if you can’t come up with the answer the blog post read this post for solution. 2012 Simple Explanation and Puzzle with SOUNDEX Function and DIFFERENCE Function In simple words - SOUNDEX converts an alphanumeric string to a four-character code to find similar-sounding words or names. DIFFERENCE function returns an integer value. The  integer returned is the number of characters in the SOUNDEX values that are the same. Read Only Files and SQL Server Management Studio (SSMS) I have come across a very interesting feature in SSMS related to “Read Only” files. I believe it is a little unknown feature as well so decided to write a blog about the same. Identifying Column Data Type of uniqueidentifier without Querying System Tables How do I know if any table has a uniqueidentifier column and what is its value without using any DMV or System Catalogues? Only information you know is the table name and you are allowed to return any kind of error if the table does not have uniqueidentifier column. Read the blog post to find the answer. Solution – User Not Able to See Any User Created Object in Tables – Security and Permissions Issue Interesting question – “When I try to connect to SQL Server, it lets me connect just fine as well let me open and explore the database. I noticed that I do not see any user created instances but when my colleague attempts to connect to the server, he is able to explore the database as well see all the user created tables and other objects. Can you help me fix it?” Importing CSV File Into Database – SQL in Sixty Seconds #018 – Video Here is interesting small 60 second video on how to import CSV file into Database. ColumnStore Index – Batch Mode vs Row Mode Here is the logic behind when Columnstore Index uses Batch Mode and when it uses Row Mode. A batch typically represents about 1000 rows of data. Batch mode processing also uses algorithms that are optimized for the multicore CPUs and increased memory throughput. Follow up – Usage of $rowguid and $IDENTITY This is an excellent follow up blog post of my earlier blog post where I explain where to use $rowguid and $identity.  If you do not know the difference between them, this is a blog with a script example. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • NVIDIA x server - "sudo nvidia config" does not generate a working 'xorg.config'

    - by Mike
    I am over 18 hours deep on this challenge. I got to this point and am stuck. very stuck. Maybe you can figure it out? Ubuntu Version 12.04 LTS with all the updates installed. Problem: The default settings in "etc/X11/xorg.conf" that are generated by the "nvidia-xconfig" tool, do not allow the NVIDIA x server to connect to the driver in my "System Settings Additional Driver window". (that's how I understand it. Lots of information below). Symptoms of Problem "System Settings Additional Driver" window has drivers, but the nvidia x server cannot connect/utilize any of the 4 drivers. the drivers are activated, but not in use. When I go to "System Tools Administration NVIDIA x server settings" I get an error that basically tells me to create a default file to initialize the NVIDIA X server (screen shot below). This is the messages the terminal gives after running a "sudo nvidia-xconfig" command for the first time. It seems that the generated file by the tool i just ran is generating a bad/unusable file: If I run the "sudo nvidia-xconfig" command again, I wont get an error the second time. However when I reboot, the default file that is generated (etc/X11/xorg.conf) simply puts the screen resolution at 800 x 600 (or something big like that). When I try to go to NVIDIA x server settings I am greeted with the same screen as the screen shot as in symptom 2 (no option to change the resolution). If I try to go to "system settings display" there are no other resolutions to choose from. At this point I must delete the newly minted "xorg.conf" and reinstate the original in its place. Here are the contents of the "xorg.conf" that is generated first (the one missing required information): # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 304.88 (buildmeister@swio-display-x86-rhel47-06) Wed Mar 27 15:32:58 PDT 2013 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Hardware: I ran the "lspci|grep VGA". There results are: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) More Hardware info: Ram: 16GB CPU: Intel Core i7-2720QM @2.2GHz * 8 Other: 64 bit. This is a triple boot computer and not a VM. Attempts With Not Success on My End: 1) Tried to append the "xorg.conf" with what I perceive is missing information and obviously it didn't fly. 2) All the other stuff I tried got me to this point. 3) See if this link is helpful to you (I barely get it, but i get enough knowing that a smarter person might find this useful): http://manpages.ubuntu.com/manpages/lucid/man1/nvidia-xconfig.1.html 4) I am completely new to Linux (40 hours over past week), but not to programming. However I am very serious about changing over to Linux. When you respond (I hope someone responds...) please respond in a way that a person new to Linux can understand. 5) By the way, the reason I am in this mess is because I MUST have a second monitor running from my laptop, and "System Settings Display" doesn't recognize my second display. I know it is possible to make the second display work in my system, because when I boot from the install CD, I perform work on the native laptop monitor, but the second monitor shows a purple screen with Ubuntu in the middle, so I know the VGA port is sending a signal out. If this is too much for you to tackle please suggest an alternative method to get a second display. I don't want to go to windows but I cannot have a single display. I am really fudged here. I hope some smart person can help. Thanks in advance. Mike. **********************EDIT #1********************** More Details About Graphics Card I was asked "which brand of nvidia-card do you have exactly?" Here is what I did to provide more info (maybe relevant, maybe not, but here is everything): 1) Took my Lenovo W520 right apart to see if there is an identifier on the actual card. However I realized that if I get deep enough to take a look, the laptop "won't like it". so I put it back together. Figuring out the card this way is not an option for me right now. 2) (My computer is triple boot) I logged into Win7 and ran 'dxdiag' command. here is the screen shot: 3) I tried to look on the lenovo website for more details... but no luck. I took a look at my receipts and here is info form receipt: System Unit: W520 NVIDIA Quadro 1000M 2GB 4) In win7 I went to the NVIDIA website and used the option to have my card 'scanned' by a Java applet to determine the latest update for my card. I tried the same with Ubuntu but I can't get the applet to run. Here is the recommended driver from from the NVIDIA Applet for my card for Win7 (I hope this shines some light on the specifics of the card): Quadro/NVS/Tesla/GRID Desktop Driver Release R319 Version: 320.00 WHQL Release Date: 3.5.2013 5) Also I went on the NVIDIA driver search and looked through every possible combination of product type + product series + product to find all the combinations that yield a 1000M card. My card is: Product Type: Quadro Product Series: Quadro Series (Notebooks) Product: 1000M ***********************EDIT #2******************* Additional Symptoms Another question that generated more symptoms I previously didn't mention was: "After generating xorg.conf by nvidia-xconfig, go to additional drivers, do you see nvidia-304?" 1) I took a screen shot of the "additional drivers" right after generating xorg.conf by nvidia-xconfig. Here it is: 2) Then I did a reboot. Now Ubuntu is 600 x 800 resolution. When I logged in after the computer came up I got an error (which I always get after generating xorg.conf by nvidia-xconfig and rebooting) 3) To finally answer the question - No. There is no "NVIDIA-304" driver. Screen shot of additional drivers after generating xorg.conf by nvidia-xconfig and rebooting : At this point I revert to the original xorg.conf and delete the xorg.conf generated by Nvidia.

    Read the article

  • Fraud Detection with the SQL Server Suite Part 2

    - by Dejan Sarka
    This is the second part of the fraud detection whitepaper. You can find the first part in my previous blog post about this topic. My Approach to Data Mining Projects It is impossible to evaluate the time and money needed for a complete fraud detection infrastructure in advance. Personally, I do not know the customer’s data in advance. I don’t know whether there is already an existing infrastructure, like a data warehouse, in place, or whether we would need to build one from scratch. Therefore, I always suggest to start with a proof-of-concept (POC) project. A POC takes something between 5 and 10 working days, and involves personnel from the customer’s site – either employees or outsourced consultants. The team should include a subject matter expert (SME) and at least one information technology (IT) expert. The SME must be familiar with both the domain in question as well as the meaning of data at hand, while the IT expert should be familiar with the structure of data, how to access it, and have some programming (preferably Transact-SQL) knowledge. With more than one IT expert the most time consuming work, namely data preparation and overview, can be completed sooner. I assume that the relevant data is already extracted and available at the very beginning of the POC project. If a customer wants to have their people involved in the project directly and requests the transfer of knowledge, the project begins with training. I strongly advise this approach as it offers the establishment of a common background for all people involved, the understanding of how the algorithms work and the understanding of how the results should be interpreted, a way of becoming familiar with the SQL Server suite, and more. Once the data has been extracted, the customer’s SME (i.e. the analyst), and the IT expert assigned to the project will learn how to prepare the data in an efficient manner. Together with me, knowledge and expertise allow us to focus immediately on the most interesting attributes and identify any additional, calculated, ones soon after. By employing our programming knowledge, we can, for example, prepare tens of derived variables, detect outliers, identify the relationships between pairs of input variables, and more, in only two or three days, depending on the quantity and the quality of input data. I favor the customer’s decision of assigning additional personnel to the project. For example, I actually prefer to work with two teams simultaneously. I demonstrate and explain the subject matter by applying techniques directly on the data managed by each team, and then both teams continue to work on the data overview and data preparation under our supervision. I explain to the teams what kind of results we expect, the reasons why they are needed, and how to achieve them. Afterwards we review and explain the results, and continue with new instructions, until we resolve all known problems. Simultaneously with the data preparation the data overview is performed. The logic behind this task is the same – again I show to the teams involved the expected results, how to achieve them and what they mean. This is also done in multiple cycles as is the case with data preparation, because, quite frankly, both tasks are completely interleaved. A specific objective of the data overview is of principal importance – it is represented by a simple star schema and a simple OLAP cube that will first of all simplify data discovery and interpretation of the results, and will also prove useful in the following tasks. The presence of the customer’s SME is the key to resolving possible issues with the actual meaning of the data. We can always replace the IT part of the team with another database developer; however, we cannot conduct this kind of a project without the customer’s SME. After the data preparation and when the data overview is available, we begin the scientific part of the project. I assist the team in developing a variety of models, and in interpreting the results. The results are presented graphically, in an intuitive way. While it is possible to interpret the results on the fly, a much more appropriate alternative is possible if the initial training was also performed, because it allows the customer’s personnel to interpret the results by themselves, with only some guidance from me. The models are evaluated immediately by using several different techniques. One of the techniques includes evaluation over time, where we use an OLAP cube. After evaluating the models, we select the most appropriate model to be deployed for a production test; this allows the team to understand the deployment process. There are many possibilities of deploying data mining models into production; at the POC stage, we select the one that can be completed quickly. Typically, this means that we add the mining model as an additional dimension to an existing DW or OLAP cube, or to the OLAP cube developed during the data overview phase. Finally, we spend some time presenting the results of the POC project to the stakeholders and managers. Even from a POC, the customer will receive lots of benefits, all at the sole risk of spending money and time for a single 5 to 10 day project: The customer learns the basic patterns of frauds and fraud detection The customer learns how to do the entire cycle with their own people, only relying on me for the most complex problems The customer’s analysts learn how to perform much more in-depth analyses than they ever thought possible The customer’s IT experts learn how to perform data extraction and preparation much more efficiently than they did before All of the attendees of this training learn how to use their own creativity to implement further improvements of the process and procedures, even after the solution has been deployed to production The POC output for a smaller company or for a subsidiary of a larger company can actually be considered a finished, production-ready solution It is possible to utilize the results of the POC project at subsidiary level, as a finished POC project for the entire enterprise Typically, the project results in several important “side effects” Improved data quality Improved employee job satisfaction, as they are able to proactively contribute to the central knowledge about fraud patterns in the organization Because eventually more minds get to be involved in the enterprise, the company should expect more and better fraud detection patterns After the POC project is completed as described above, the actual project would not need months of engagement from my side. This is possible due to our preference to transfer the knowledge onto the customer’s employees: typically, the customer will use the results of the POC project for some time, and only engage me again to complete the project, or to ask for additional expertise if the complexity of the problem increases significantly. I usually expect to perform the following tasks: Establish the final infrastructure to measure the efficiency of the deployed models Deploy the models in additional scenarios Through reports By including Data Mining Extensions (DMX) queries in OLTP applications to support real-time early warnings Include data mining models as dimensions in OLAP cubes, if this was not done already during the POC project Create smart ETL applications that divert suspicious data for immediate or later inspection I would also offer to investigate how the outcome could be transferred automatically to the central system; for instance, if the POC project was performed in a subsidiary whereas a central system is available as well Of course, for the actual project, I would repeat the data and model preparation as needed It is virtually impossible to tell in advance how much time the deployment would take, before we decide together with customer what exactly the deployment process should cover. Without considering the deployment part, and with the POC project conducted as suggested above (including the transfer of knowledge), the actual project should still only take additional 5 to 10 days. The approximate timeline for the POC project is, as follows: 1-2 days of training 2-3 days for data preparation and data overview 2 days for creating and evaluating the models 1 day for initial preparation of the continuous learning infrastructure 1 day for presentation of the results and discussion of further actions Quite frequently I receive the following question: are we going to find the best possible model during the POC project, or during the actual project? My answer is always quite simple: I do not know. Maybe, if we would spend just one hour more for data preparation, or create just one more model, we could get better patterns and predictions. However, we simply must stop somewhere, and the best possible way to do this, according to my experience, is to restrict the time spent on the project in advance, after an agreement with the customer. You must also never forget that, because we build the complete learning infrastructure and transfer the knowledge, the customer will be capable of doing further investigations independently and improve the models and predictions over time without the need for a constant engagement with me.

    Read the article

  • T-SQL Tuesday #31 - Logging Tricks with CONTEXT_INFO

    - by Most Valuable Yak (Rob Volk)
    This month's T-SQL Tuesday is being hosted by Aaron Nelson [b | t], fellow Atlantan (the city in Georgia, not the famous sunken city, or the resort in the Bahamas) and covers the topic of logging (the recording of information, not the harvesting of trees) and maintains the fine T-SQL Tuesday tradition begun by Adam Machanic [b | t] (the SQL Server guru, not the guy who fixes cars, check the spelling again, there will be a quiz later). This is a trick I learned from Fernando Guerrero [b | t] waaaaaay back during the PASS Summit 2004 in sunny, hurricane-infested Orlando, during his session on Secret SQL Server (not sure if that's the correct title, and I haven't used parentheses in this paragraph yet).  CONTEXT_INFO is a neat little feature that's existed since SQL Server 2000 and perhaps even earlier.  It lets you assign data to the current session/connection, and maintains that data until you disconnect or change it.  In addition to the CONTEXT_INFO() function, you can also query the context_info column in sys.dm_exec_sessions, or even sysprocesses if you're still running SQL Server 2000, if you need to see it for another session. While you're limited to 128 bytes, one big advantage that CONTEXT_INFO has is that it's independent of any transactions.  If you've ever logged to a table in a transaction and then lost messages when it rolled back, you can understand how aggravating it can be.  CONTEXT_INFO also survives across multiple SQL batches (GO separators) in the same connection, so for those of you who were going to suggest "just log to a table variable, they don't get rolled back":  HA-HA, I GOT YOU!  Since GO starts a new batch all variable declarations are lost. Here's a simple example I recently used at work.  I had to test database mirroring configurations for disaster recovery scenarios and measure the network throughput.  I also needed to log how long it took for the script to run and include the mirror settings for the database in question.  I decided to use AdventureWorks as my database model, and Adam Machanic's Big Adventure script to provide a fairly large workload that's repeatable and easily scalable.  My test would consist of several copies of AdventureWorks running the Big Adventure script while I mirrored the databases (or not). Since Adam's script contains several batches, I decided CONTEXT_INFO would have to be used.  As it turns out, I only needed to grab the start time at the beginning, I could get the rest of the data at the end of the process.   The code is pretty small: declare @time binary(128)=cast(getdate() as binary(8)) set context_info @time   ... rest of Big Adventure code ...   go use master; insert mirror_test(server,role,partner,db,state,safety,start,duration) select @@servername, mirroring_role_desc, mirroring_partner_instance, db_name(database_id), mirroring_state_desc, mirroring_safety_level_desc, cast(cast(context_info() as binary(8)) as datetime), datediff(s,cast(cast(context_info() as binary(8)) as datetime),getdate()) from sys.database_mirroring where db_name(database_id) like 'Adv%';   I declared @time as a binary(128) since CONTEXT_INFO is defined that way.  I couldn't convert GETDATE() to binary(128) as it would pad the first 120 bytes as 0x00.  To keep the CAST functions simple and avoid using SUBSTRING, I decided to CAST GETDATE() as binary(8) and let SQL Server do the implicit conversion.  It's not the safest way perhaps, but it works on my machine. :) As I mentioned earlier, you can query system views for sessions and get their CONTEXT_INFO.  With a little boilerplate code this can be used to monitor long-running procedures, in case you need to kill a process, or are just curious  how long certain parts take.  In this example, I added code to Adam's Big Adventure script to set CONTEXT_INFO messages at strategic places I want to monitor.  (His code is in UPPERCASE as it was in the original, mine is all lowercase): declare @msg binary(128) set @msg=cast('Altering bigProduct.ProductID' as binary(128)) set context_info @msg go ALTER TABLE bigProduct ALTER COLUMN ProductID INT NOT NULL GO set context_info 0x0 go declare @msg1 binary(128) set @msg1=cast('Adding pk_bigProduct Constraint' as binary(128)) set context_info @msg1 go ALTER TABLE bigProduct ADD CONSTRAINT pk_bigProduct PRIMARY KEY (ProductID) GO set context_info 0x0 go declare @msg2 binary(128) set @msg2=cast('Altering bigTransactionHistory.TransactionID' as binary(128)) set context_info @msg2 go ALTER TABLE bigTransactionHistory ALTER COLUMN TransactionID INT NOT NULL GO set context_info 0x0 go declare @msg3 binary(128) set @msg3=cast('Adding pk_bigTransactionHistory Constraint' as binary(128)) set context_info @msg3 go ALTER TABLE bigTransactionHistory ADD CONSTRAINT pk_bigTransactionHistory PRIMARY KEY NONCLUSTERED(TransactionID) GO set context_info 0x0 go declare @msg4 binary(128) set @msg4=cast('Creating IX_ProductId_TransactionDate Index' as binary(128)) set context_info @msg4 go CREATE NONCLUSTERED INDEX IX_ProductId_TransactionDate ON bigTransactionHistory(ProductId,TransactionDate) INCLUDE(Quantity,ActualCost) GO set context_info 0x0   This doesn't include the entire script, only those portions that altered a table or created an index.  One annoyance is that SET CONTEXT_INFO requires a literal or variable, you can't use an expression.  And since GO starts a new batch I need to declare a variable in each one.  And of course I have to use CAST because it won't implicitly convert varchar to binary.  And even though context_info is a nullable column, you can't SET CONTEXT_INFO NULL, so I have to use SET CONTEXT_INFO 0x0 to clear the message after the statement completes.  And if you're thinking of turning this into a UDF, you can't, although a stored procedure would work. So what does all this aggravation get you?  As the code runs, if I want to see which stage the session is at, I can run the following (assuming SPID 51 is the one I want): select CAST(context_info as varchar(128)) from sys.dm_exec_sessions where session_id=51   Since SQL Server 2005 introduced the new system and dynamic management views (DMVs) there's not as much need for tagging a session with these kinds of messages.  You can get the session start time and currently executing statement from them, and neatly presented if you use Adam's sp_whoisactive utility (and you absolutely should be using it).  Of course you can always use xp_cmdshell, a CLR function, or some other tricks to log information outside of a SQL transaction.  All the same, I've used this trick to monitor long-running reports at a previous job, and I still think CONTEXT_INFO is a great feature, especially if you're still using SQL Server 2000 or want to supplement your instrumentation.  If you'd like an exercise, consider adding the system time to the messages in the last example, and an automated job to query and parse it from the system tables.  That would let you track how long each statement ran without having to run Profiler. #TSQL2sDay

    Read the article

  • Setup Guide for updating local system and the repository with the incremental Solaris 11.1 SRU

    - by Gurubalan
    This guide covers the steps to implement the following setup. I. Updating the local system from Solaris 11.1 to Solaris 11.1 SRU 16.5II. Setting up local system as an IPS Repository Server (HTTP interface)III. Updating the local repository with the incremental Solaris 11.1 SRU 16.5I. Updating the local system from Solaris 11.1 to Solaris 11.1 SRU 16.5We assume that the local system is currently installed with Solaris 11.1 GA and the system doesn't have internet connectivity.What I have:1. Two parts of full repo iso files downloaded from http://www.oracle.com/technetwork/server-storage/solaris11/downloads/index.html. Both files are concatenated to a single file using the following command. $ cat sol-11_1-repo-full.iso-a sol-11_1-repo-full.iso-b > sol-11_1-repo-full.iso I suggest to verify the downloaded file against its md5checksum value [http://download.oracle.com/otn/solaris/11_1/md5sum.txt] using the following command digest -a md5 <file-name>  // the output of this command should match the original checksum value for that file.2. Incremental repo sol-11_1_16_5_0-incr-repo.iso downloaded from MOS [Patch 18269379: ORACLE SOLARIS 11.1.16.5.0 REPO ISO IMAGE (SPARC/X86 (64-BIT)]. You can get the checksum value of incremental repo iso by clicking the check box "show digest details" when you download the file.3. The local system IP is 192.168.10.10 & port 81 is reserved for repo serverPlease note that this repo file (either full or incremental) is common for both SPARC and X86(64BIT).Steps to update the local system: 1. #mounting s11.1 full repo iso to mnt        $ mount -F hsfs /soft/sol-11_1-repo-full.iso /mnt 2. Setting the pkg publisher to full repo source         $ pkg set-publisher -g file:///mnt/repo solaris 3. Perform the update of the packages.        $ pkg updateII. Setting up local system (Oracle Solaris 11.1) as an IPS Repository Server(HTTP interface):Please note that we have already mounted the full repo iso at /mnt    1. # copying /mnt permanently to the disk location at /s11.1        #zfs create -o atime=off -o mountpoint=/s11.1 rpool/s11.1        #rsync -aP /mnt/* /s11.1     2. #unmounting mnt         #umount /mnt3. To allow clients to access the local repository via HTTP, enable the application/pkg/server Service Management Facility (SMF) service.        svccfg -s application/pkg/server setprop pkg/inst_root=<data_source>/repo        eg: $svccfg -s application/pkg/server setprop pkg/inst_root=/s11.1/repo4. Setting port# to 81      svccfg -s application/pkg/server setprop pkg/port=<port_number>      eg: svccfg -s application/pkg/server setprop pkg/port="81"5a. Enable the pkg/server service (if the service is disabled)     $svcs pkg/server     STATE          STIME    FMRI     disabled        19:55:03 svc:/application/pkg/server:default      $svcadm enable pkg/server5b. Refresh/Restart the service, if it is already online       $svcadm refresh application/pkg/server       $svcadm restart application/pkg/server6. Setting pkg publisher on repo server and repo clients:      pkg set-publisher -G '*' -g http://<ip>:<port> solaris      eg: $pkg set-publisher -G '*' -g 'http://192.168.10.10:81' solaris7. Verify the Solaris 11.1 version from the repository         $pkgrepo list -s http://192.168.10.10:81 | grep entire         solaris   entire     0.5.11,5.11-0.175.1.0.0.24.2:20120919T190135Z You will have multiple row entries if the repository is setup with incremental SRUs.III. Updating the local repository with the incremental Solaris 11.1 SRU 16.51. #mounting s11.1 incremental SRU repo iso to mnt        $ mount -F hsfs <full_path_to>/sol-11_1_sruN_bldnum_respinnum-incr-repo.iso  /mnt        $ mount -F hsfs /soft/sol-11_1_16_5_0-incr-repo.iso /mnt2. Updating the local repository        $pkgrecv -s  /mnt/repo -d /s11.1/repo '*'3. Building a Search Index    $pkgrepo -s /s11.1/repo refresh     Initiating repository refresh.4. Refresh/Restart the service       $svcadm refresh svc:/application/pkg/server       $svcadm restart svc:/application/pkg/server5. Verify the repo has the incremental SRU as well.       # pkgrepo list -s http://192.168.10.10:81 | grep entire        solaris   entire      0.5.11,5.11-0.175.1.16.0.5.0:20140218T165248Z       solaris   entire      0.5.11,5.11-0.175.1.0.0.24.2:20120919T190135Z

    Read the article

  • Oracle Tutor: Top 10 to Implement Sustainable Policies and Procedures

    - by emily.chorba(at)oracle.com
    Overview Your organization (executives, managers, and employees) understands the value of having written business process documents (process maps, procedures, instructions, reference documents, and form abstracts). Policies and procedures should be documented because they help to reduce the range of individual decisions and encourage management by exception: the manager only needs to give special attention to unusual problems, not covered by a specific policy or procedure. As more and more procedures are written to cover recurring situations, managers will begin to make decisions which will be consistent from one functional area to the next.Companies should take a project management approach when implementing an environment for a sustainable documentation program and do the following:1. Identify an Executive Champion2. Put together a winning team3. Assign ownership4. Centralize publishing5. Establish the Document Maintenance Process Up Front6. Document critical activities only7. Document actual practice8. Minimize documentation9. Support continuous improvement10. Keep it simple 1. Identify an Executive ChampionAppoint a top down driver. Select one key individual to be a mentor for the procedure planning team. The individual should be a senior manager, such as your company president, CIO, CFO, the vice-president of quality, manufacturing, or engineering. Written policies and procedures can be important supportive aids when known to express the thinking for the chief executive officer and / or the president and to have his or her full support. 2. Put Together a Winning TeamChoose a strong Project Management Leader and staff the procedure planning team with management members from cross functional groups. Make sure team members have the responsibility - and the authority - to make things happen.The winning team should consist of the Documentation Project Manager, Document Owners (one for each functional area), a Document Controller, and Document Specialists (as needed). The Tutor Implementation Guide has complete job descriptions for these roles. 3. Assign Ownership It is virtually impossible to keep process documentation simple and meaningful if employees who are far removed from the activity itself create it. It is impossible to keep documentation up-to-date when responsibility for the document is not clearly understood.Key to the Tutor methodology, therefore, is the concept of ownership. Each document has a single owner, who is responsible for ensuring that the document is necessary and that it reflects actual practice. The owner must be a person who is knowledgeable about the activity and who has the authority to build consensus among the persons who participate in the activity as well as the authority to define or change the way an activity is performed. The owner must be an advocate of the performers and negotiate, not dictate practices.In the Tutor environment, a document's owner is the only person with the authority to approve an update to that document. 4. Centralize Publishing Although it is tempting (especially in a networked environment and with document management software solutions) to decentralize the control of all documents -- with each owner updating and distributing his own -- Tutor promotes centralized publishing by assigning the Document Administrator (gate keeper) to manage the updates and distribution of the procedures library. 5. Establish a Document Maintenance Process Up Front (and stick to it) Everyone in your organization should know they are invited to suggest changes to procedures and should understand exactly what steps to take to do so. Tutor provides a set of procedures to help your company set up a healthy document control system. There are many document management products available to automate some of the document change and maintenance steps. Depending on the size of your organization, a simple document management system can reduce the effort it takes to track and distribute document changes and updates. Whether your company decides to store the written policies and procedures on a file server or in a database, the essential tasks for maintaining documents are the same, though some tasks are automated. 6. Document Critical Activities Only The best way to keep your documentation simple is to reduce the number of process documents to a bare minimum and to include in those documents only as much detail as is absolutely necessary. The first step to reducing process documentation is to document only those activities that are deemed critical. Not all activities require documentation. In fact, some critical activities cannot and should not be standardized. Others may be sufficiently documented with an instruction or a checklist and may not require a procedure. A document should only be created when it enhances the performance of the employee performing the activity. If it does not help the employee, then there is no reason to maintain the document. Activities that represent little risk (such as project status), activities that cannot be defined in terms of specific tasks (such as product research), and activities that can be performed in a variety of ways (such as advertising) often do not require documentation. Sometimes, an activity will evolve to the point where documentation is necessary. For example, an activity performed by single employee may be straightforward and uncomplicated -- that is, until the activity is performed by multiple employees. Sometimes, it is the interaction between co-workers that necessitates documentation; sometimes, it is the complexity or the diversity of the activity.7. Document Actual Practices The only reason to maintain process documentation is to enhance the performance of the employee performing the activity. And documentation can only enhance performance if it reflects reality -- that is, current best practice. Documentation that reflects an unattainable ideal or outdated practices will end up on the shelf, unused and forgotten.Documenting actual practice means (1) auditing the activity to understand how the work is really performed, (2) identifying best practices with employees who are involved in the activity, (3) building consensus so that everyone agrees on a common method, and (4) recording that consensus.8. Minimize Documentation One way to keep it simple is to document at the highest level possible. That is, include in your documents only as much detail as is absolutely necessary.When writing a document, you should ask yourself, What is the purpose of this document? That is, what problem will it solve?By focusing on this question, you can target the critical information.• What questions are the end users likely to have?• What level of detail is required?• Is any of this information extraneous to the document's purpose? Short, concise documents are user friendly and they are easier to keep up to date. 9. Support Continuous Improvement Employees who perform an activity are often in the best position to identify improvements to the process. In other words, continuous improvement is a natural byproduct of the work itself -- but only if the improvements are communicated to all employees who are involved in the process, and only if there is consensus among those employees.Traditionally, process documentation has been used to dictate performance, to limit employees' actions. In the Tutor environment, process documents are used to communicate improvements identified by employees. How does this work? The Tutor methodology requires a process document to reflect actual practice, so the owner of a document must routinely audit its content -- does the document match what the employees are doing? If it doesn't, the owner has the responsibility to evaluate the process, to build consensus among the employees, to identify "best practices," and to communicate these improvements via a document update. Continuous improvement can also be an outgrowth of corrective action -- but only if the solutions to problems are communicated effectively. The goal should be to solve a problem once and only once, which means not only identifying the solution, but ensuring that the solution becomes part of the process. The Tutor system provides the method through which improvements and solutions are documented and communicated to all affected employees in a cost-effective, timely manner; it ensures that improvements are not lost or confined to a single employee. 10. Keep it Simple Process documents don't have to be complex and unfriendly. In fact, the simpler the format and organization, the more likely the documents will be used. And the simpler the method of maintenance, the more likely the documents will be kept up-to-date. Keep it simply by:• Minimizing skills and training required• Following the established Tutor document format and layout• Avoiding technology just for technology's sake No other rule has as major an impact on the success of your internal documentation as -- keep it simple. Learn More For more information about Tutor, visit Oracle.Com or the Tutor Blog. Post your questions at the Tutor Forum.   Emily Chorba Principle Product Manager Oracle Tutor & BPM 

    Read the article

  • Windows 8 Launch&ndash;Why OEM and Retailers Should STFU

    - by D'Arcy Lussier
    Microsoft has gotten a lot of flack for the Surface from OEM/hardware partners who create Windows-based devices and I’m sure, to an extent, retailers who normally stock and sell Windows-based devices. I mean we all know how this is supposed to work – Microsoft makes the OS, partners make the hardware, retailers sell the hardware. Now Microsoft is breaking the rules by not only offering their own hardware but selling them via online and through their Microsoft branded stores! The thought has been that Microsoft is trying to set a standard for the other hardware companies to reach for. Maybe. I hope, at some level, Microsoft may be covertly responding to frustrations associated with trusting the OEMs and Retailers to deliver on their part of the supply chain. I know as a consumer, I’m very frustrated with the Windows 8 launch. Aside from the Surface sales, there’s nothing happening at the retail level. Let me back up and explain. Over the weekend I visited a number of stores in hopes of trying out various Windows 8 devices. Out of three retailers (Staples, Best Buy, and Future Shop), not *one* met my expectations. Let me be honest with you Staples, I never really have high expectations from your computer department. If I need paper or pens, whatever, but computers – you’re not the top of my list for price or selection. Still, considering you flaunted Win 8 devices in your flyer I expected *something* – some sign of effort that you took the Windows 8 launch seriously. As I entered the 1910 Pembina Highway location in Winnipeg, there was nothing – no signage, no banners – nothing that would suggest Windows 8 had even launched. I made my way to the laptops. I had to play with each machine to determine which ones were running Windows 8. There wasn’t anything on the placards that made it obvious which were Windows 8 machines and which ones were Windows 7. Likewise, there was no easy way to identify the touch screen laptop (the HP model) from the others without physically touching the screen to verify. Horrible experience. In the same mall as the Staples I mentioned above, there’s a Future Shop. Surely they would be more on the ball. I walked in to the 1910 Pembina Highway location and immediately realized I would not get a better experience. Except for the sign by the front door mentioning Windows 8, there was *nothing* in the computer department pointing you to the Windows 8 devices. Like in Staples, the Win 8 laptops were mixed in with the Win 7 ones and there was nothing notable calling out which ones were running Win 8. I happened to hit up the St. James Street location today, thinking since its a busier store they must have more options. To their credit, they did have two staff members decked out in Windows 8 shirts and who were helping a customer understand Windows 8. But otherwise, there was nothing highlighting the Windows 8 devices and they were again mixed in with the rest of the Win 7 machines. Finally, we have the St. James Street Best Buy location here in Winnipeg. I’m sure Best Buy will have their act together. Nope, not even close. Same story as the others: minimal signage (there was a sign as you walked in with a link to this schedule of demo days), Windows 8 hardware mixed with the rest of the PC offerings, and no visible call-outs identifying which were Win 8 based. This meant that, like Future Shop and Staples, if you wanted to know which machine had Windows 8 you had to go and scrutinize each machine. Also, there was nothing identifying which ones were touch based and which were not. Just Another Day… To these retailers, it seemed that the Windows 8 launch was just another day, with another product to add to the showroom floor. Meanwhile, Apple has their dedicated areas *in all three stores*. It was dead simple to find where the Apple products were compared to the Windows 8 products. No wonder Microsoft is starting to push their own retail stores. No wonder Microsoft is trying to funnel orders through them instead of relying on these bloated retail big box stores who obviously can’t manage a product launch. It’s Not Just The Retailers… Remember when the Acer CEO, Founder, and President of Computer Global Operations all weighed in on how Microsoft releasing the Surface would have a “huge negative impact for the ecosystem and other brands may take a negative reaction”? Also remember the CEO stating “[making hardware] is not something you are good at so please think twice”? Well the launch day has come and gone, and so far Microsoft is the only one that delivered on having hardware available on the October 26th date. Oh sure, there are laptops running Windows 8 – but all in one desktop PCs? I’ve only seen one or two! And tablets are *non existent*, with some showing an early to late November availability on Best Buy’s website! So while the retailers could be doing more to make it easier to find Windows 8 devices, the manufacturers could help by *getting devices into stores*! That’s supposedly something that these companies are good at, according to the Acer CEO. So Here’s What the Retailers and Manufacturers Need To Do… Get Product Out The pivotal timeframe will be now to the end of November. We need to start seeing all these fantastic pieces of hardware ship – including the Samsung ATIV Smart PC Pro, the Acer Iconia, the Asus TAICHI 21, and the sexy Samsung Series 7 27” desktop. It’s not enough to see product announcements, we need to see actual devices. Make It Easy For Customers To Find Win8 Devices You want to make it easy to sell these things? Make it easy for people to find them! Have staff on hand that really know how these devices run and what can be done with them. Don’t just have a single demo day, have people who can demo it every day! Make It Easy to See the Features There’s touch screen desktops, touch screen laptops, tablets, non-touch laptops, etc. People need to easily find the features for each machine. If I’m looking for a touch-laptop, I shouldn’t need to sift through all the non-touch laptops to find them – at the least, I need to quickly be able to see which ones are touch. I feel silly even typing this because this should be retail 101 and I have no retail background (but I do have an extensive background as a customer). In Summary… Microsoft launching the Surface and selling them through their own channels isn’t slapping its OEM and retail partners in the face; its slapping them to wake the hell up and stop coasting through Windows launch events like they don’t matter. Unless I see some improvements from vendors and retailers in November, I may just hold onto my money for a Surface Pro even if I have to wait until early 2013. Your move OEM/Retailers. *Update – While my experience has been in Winnipeg, similar experiences have been voiced from colleagues in Calgary and Edmonton.

    Read the article

  • Thou shalt not put code on a piedestal - Code is a tool, no more, no less

    - by Ralf Westphal
    “Write great code and everything else becomes easier” is what Paul Pagel believes in. That´s his version of an adage by Brian Marick he cites: “treat code as an end, not just a means.” And he concludes: “My post-Agile world is software craftsmanship.” I wonder, if that´s really the way to go. Will “simply” writing great code lead the software industry into the light? He´s alluding to the philosopher Kant who proposed, a human beings should never be treated as a means, but always as an end. But should we transfer this ethical statement into the world of software? I doubt it.   Reason #1: Human beings are categorially different from code. They are autonomous entities who need to find a way of living happily together. To Kant it seemed this goal could only be reached if nobody (ab)used a human being for his/her purposes. Because using a human being, i.e. treating it as a means, would contradict the fundamental autonomy and freedom of human beings. People should hold up a symmetric view of their relationships: Since nobody wants to be (ab)used, nobody should (ab)use anybody else. If you want to be treated decently, with respect, in accordance with your own free will - which means as an end - then do the same to other people. Code is dead, it´s a product, it´s a tool for people to reach their goals. No company spends any money on code other than to save money or earn money in the long run. Code is not a puppy. Enterprises do not commission software development to just feel good in its company. Code is not a buddy. Code is a slave, if you will. A mechanical slave, a non-tangible robot. Code is a tool, is a tool. And if we start to treat it differently, if we elevate its status unduely… I guess that will contort our relationship in a contraproductive way. Please get me right: Just because something is “just a tool”, “just a product” does not mean we should not be careful while designing, building, using it. Right to the contrary. We should be very careful when writing code – but not for the code´s sake! We should be careful because we respect our customers who are fellow human beings who should be treated as an end. If we are careless, neglectful, ignorant when producing code on their behalf, then we´re using them. Being sloppy means you´re caring more for yourself that for your customer. You´re then treating the customer as a means to fulfill some of your own needs. That´s plain unethical behavior.   Reason #2: The focus should always be on your purpose, not on any tool. But if code is treated as an end, then the focus is on the code. That might sound right, because where else should be your focus as a software developer? But, well, I´d say, your focus should be on delivering value to your customer. Because in the end your customer does not care if you write a single line of code. She just wants her problem to be solved. Solving problems is the purpose of any contractor. Code must be treated just as a means, a tool we know how to handle very well. But if we´re really trying to be craftsmen then we should be conscious about exactly that and act ethically. That means we must never be so focused on our tool as to be unable to suggest better solutions to the problems of our customers than code.   I´m all with Paul when he urges us to “Write great code”. Sure, if you need to write code, then by all means do so. Write the best code you can think of – and then try to improve it. Paul has all the best intentions when he signs Brians “treat code as an end” - but as we all know: “The road to hell is paved with best intentions” ;-) Yes, I can imagine a “hell of code focus”. In fact, I don´t need to imagine it, I´m seeing it quite often. Because code hell is whereever two developers stand together and are so immersed in talking about all sorts of coding tricks, design patterns, code smells, technologies, platforms, tools that they lose sight of the big picture. Talking about TDD or SOLID or refactoring is a sign of consciousness – relative to the “cowboy coders” view of the world. But from yet another point of view TDD, SOLID, and refactoring are just cures for ailments within a system. And I fear, if “Writing great code” is the only focus or the main focus of software development, then we as an industry lose the ability to see that. Focus draws a line around something, it defines a horizon for perceptions and thinking. So if we focus on code our horizon ends where “the land of code” ends. I don´t think that should be our professional attitude.   So what about Software Craftsmanship as the next big thing after Agility? I think Software Craftsmanship has an important message for all software developers and beyond. But to make it the successor of the Agility movement seems to miss a point. Agility never claimed to solve all software development problems, I´d say. So to blame it for having missed out on certain aspects of it is wrong. If I had to summarize Agility in one word I´d say “Value”. Agility put value for the customer back in software development. Focus on delivering value early and often – that´s Agility´s mantra. All else follows from that. And I ask you: Is that obsolete? Is delivering value not hip anymore? No, sure not. That´s our very purpose as software developers. So how can Agility become obsolete and need to be replaced? We need to do away with this “either/or”-thinking. It´s either Agility or Lean or Software Craftsmanship or whatnot. Instead we should start integrating concepts and movements. Think “both/and”. Think Agility plus Software Craftsmanship plus Lean plus whatnot. We don´t neet to tear down anything from a piedestal and replace it with a new idol. Instead we should do away with piedestals and arrange whatever is helpful is a circle. Then we can turn to concepts, movements for whatever they are best. After 10 years of Agility we should be able to identify what it was good at – and keep that. Keep Agility around and add whatever Agility was lacking or never concerned with. Add whatever is at the core of Software Craftsmanship. Add whatever is at the core of Lean etc. But don´t call out the age of Post-Agility. Because it better never will end. Because once we start to lose Agility´s core we´re losing focus of the customer.

    Read the article

  • CodePlex Daily Summary for Monday, June 02, 2014

    CodePlex Daily Summary for Monday, June 02, 2014Popular ReleasesPortable Class Library for SQLite: Portable Class Library for SQLite - 3.8.4.4: This pull request from mattleibow addresses an issue with custom function creation (define functions in C# code and invoke them from SQLite as id they where regular SQL functions). Impact: Xamarin iOSTweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.GenerateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweets- Add mis...Sandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...Tooltip Web Preview: ToolTip Web Preview: Version 1.0Database Helper: Release 1.0.0.0: First Release of Database HelperCoMaSy: CoMaSy1.0.2: !Contact Management SystemImage View Slider: Image View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. We wish somebody to improve freely. Try this out! Author : Steven Renaldo Antony Yustinus Arjuna Purnama Putra Andre Wijaya P Martin Lidau PBK GENAP 2014 - TI UKDWAspose for Apache POI: Missing Features of Apache POI WP - v 1.1: Release contain the Missing Features in Apache POI WP SDK in Comparison with Aspose.Words for dealing with Microsoft Word. What's New ?Following Examples: Insert Picture in Word Document Insert Comments Set Page Borders Mail Merge from XML Data Source Moving the Cursor Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.SEToolbox: 01.032.014 Release 1: Added fix when loading game Textures for icons causing 'Unable to read beyond the end of the stream'. Added new Resource Report, that displays all in game resources in a concise report. Added in temp directory cleaner, to keep excess files from building up. Fixed use of colors on the windows, to work better with desktop schemes. Adding base support for multilingual resources. This will allow loading of the Space Engineers resources to show localized names, and display localized date a...ClosedXML - The easy way to OpenXML: ClosedXML 0.71.2: More memory and performance improvements. Fixed an issue with pivot table field order.Vi-AIO SearchBar: Vi – AIO Search Bar: Version 1.0Top Verses ( Ayat Emas ): Binary Top Verses: This one is the bin folder of the component. the .dll component is inside.Traditional Calendar Component: Traditional Calender Converter: Duta Wacana Christian University This file containing Traditional Calendar Component and Demo Aplication that using Traditional Calendar Component. This component made with .NET Framework 4 and the programming language is C# .SQLSetupHelper: 1.0.0.0: First Stable Version of SQL SetupComposite Iconote: Composite Iconote: This is a composite has been made by Microsoft Visual Studio 2013. Requirement: To develop this composite or use this component in your application, your computer must have .NET framework 4.5 or newer.Magick.NET: Magick.NET 6.8.9.101: Magick.NET linked with ImageMagick 6.8.9.1. Breaking changes: - Int/short Set methods of WritablePixelCollection are now unsigned. - The Q16 build no longer uses HDRI, switch to the new Q16-HDRI build if you need HDRI.fnr.exe - Find And Replace Tool: 1.7: Bug fixes Refactored logic for encoding text values to command line to handle common edge cases where find/replace operation works in GUI but not in command line Fix for bug where selection in Encoding drop down was different when generating command line in some cases. It was reported in: https://findandreplace.codeplex.com/workitem/34 Fix for "Backslash inserted before dot in replacement text" reported here: https://findandreplace.codeplex.com/discussions/541024 Fix for finding replacing...VG-Ripper & PG-Ripper: VG-Ripper 2.9.59: changes NEW: Added Support for 'GokoImage.com' links NEW: Added Support for 'ViperII.com' links NEW: Added Support for 'PixxxView.com' links NEW: Added Support for 'ImgRex.com' links NEW: Added Support for 'PixLiv.com' links NEW: Added Support for 'imgsee.me' links NEW: Added Support for 'ImgS.it' linksToolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2014.5.28): XrmToolbox improvement XrmToolBox updates (v1.2014.5.28)Fix connecting to a connection with custom authentication without saved password Tools improvement New tool!Solution Components Mover (v1.2014.5.22) Transfer solution components from one solution to another one Import/Export NN relationships (v1.2014.3.7) Allows you to import and export many to many relationships Tools updatesAttribute Bulk Updater (v1.2014.5.28) Audit Center (v1.2014.5.28) View Layout Replicator (v1.2014.5.28) Scrip...Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.10: Fix for Issue #20875 - echo switch doesn't work for CSS CSS should honor the SASS source-file comments JS should allow multi-line comment directivesNew Projects[ISEN] Rendu de projet Naughty3Dogs - Pong3D: Pong3D est un jeu qui reprend le principe classique du Pong en le portant dans un environnement 3D à l'aide du langage c# et du moteur Unity3DBootstrap for MVC: Bootstrap for MVC.F. A. Q. - Najczesciej zadawane pytania: FAQForuMvc: Technifutur short projecthomework456: no.iStoody: Studies organize solution, available through app for Windows and Windows Phone.liaoliao: ???????????Price Tracker: Allows a user to track prices based on parsed emailsRoslynEval: RoslynRx Hub: Rx Hub provides server side computation which initiate by subscriber requestSharepoint Online AppCache Reset: We are an IT resource company providing Virtual IT services and custom and opensource programs for everyday needs. UnitConversionLib : Smart Unit Conversion Library in C#: Conversion of units, arithmetic operation and parsing quantities with their units on run time. Smart unit converter and conversion lib for physical quantities,

    Read the article

  • When is a Seek not a Seek?

    - by Paul White
    The following script creates a single-column clustered table containing the integers from 1 to 1,000 inclusive. IF OBJECT_ID(N'tempdb..#Test', N'U') IS NOT NULL DROP TABLE #Test ; GO CREATE TABLE #Test ( id INTEGER PRIMARY KEY CLUSTERED ); ; INSERT #Test (id) SELECT V.number FROM master.dbo.spt_values AS V WHERE V.[type] = N'P' AND V.number BETWEEN 1 AND 1000 ; Let’s say we need to find the rows with values from 100 to 170, excluding any values that divide exactly by 10.  One way to write that query would be: SELECT T.id FROM #Test AS T WHERE T.id IN ( 101,102,103,104,105,106,107,108,109, 111,112,113,114,115,116,117,118,119, 121,122,123,124,125,126,127,128,129, 131,132,133,134,135,136,137,138,139, 141,142,143,144,145,146,147,148,149, 151,152,153,154,155,156,157,158,159, 161,162,163,164,165,166,167,168,169 ) ; That query produces a pretty efficient-looking query plan: Knowing that the source column is defined as an INTEGER, we could also express the query this way: SELECT T.id FROM #Test AS T WHERE T.id >= 101 AND T.id <= 169 AND T.id % 10 > 0 ; We get a similar-looking plan: If you look closely, you might notice that the line connecting the two icons is a little thinner than before.  The first query is estimated to produce 61.9167 rows – very close to the 63 rows we know the query will return.  The second query presents a tougher challenge for SQL Server because it doesn’t know how to predict the selectivity of the modulo expression (T.id % 10 > 0).  Without that last line, the second query is estimated to produce 68.1667 rows – a slight overestimate.  Adding the opaque modulo expression results in SQL Server guessing at the selectivity.  As you may know, the selectivity guess for a greater-than operation is 30%, so the final estimate is 30% of 68.1667, which comes to 20.45 rows. The second difference is that the Clustered Index Seek is costed at 99% of the estimated total for the statement.  For some reason, the final SELECT operator is assigned a small cost of 0.0000484 units; I have absolutely no idea why this is so, or what it models.  Nevertheless, we can compare the total cost for both queries: the first one comes in at 0.0033501 units, and the second at 0.0034054.  The important point is that the second query is costed very slightly higher than the first, even though it is expected to produce many fewer rows (20.45 versus 61.9167). If you run the two queries, they produce exactly the same results, and both complete so quickly that it is impossible to measure CPU usage for a single execution.  We can, however, compare the I/O statistics for a single run by running the queries with STATISTICS IO ON: Table '#Test'. Scan count 63, logical reads 126, physical reads 0. Table '#Test'. Scan count 01, logical reads 002, physical reads 0. The query with the IN list uses 126 logical reads (and has a ‘scan count’ of 63), while the second query form completes with just 2 logical reads (and a ‘scan count’ of 1).  It is no coincidence that 126 = 63 * 2, by the way.  It is almost as if the first query is doing 63 seeks, compared to one for the second query. In fact, that is exactly what it is doing.  There is no indication of this in the graphical plan, or the tool-tip that appears when you hover your mouse over the Clustered Index Seek icon.  To see the 63 seek operations, you have click on the Seek icon and look in the Properties window (press F4, or right-click and choose from the menu): The Seek Predicates list shows a total of 63 seek operations – one for each of the values from the IN list contained in the first query.  I have expanded the first seek node to show the details; it is seeking down the clustered index to find the entry with the value 101.  Each of the other 62 nodes expands similarly, and the same information is contained (even more verbosely) in the XML form of the plan. Each of the 63 seek operations starts at the root of the clustered index B-tree and navigates down to the leaf page that contains the sought key value.  Our table is just large enough to need a separate root page, so each seek incurs 2 logical reads (one for the root, and one for the leaf).  We can see the index depth using the INDEXPROPERTY function, or by using the a DMV: SELECT S.index_type_desc, S.index_depth FROM sys.dm_db_index_physical_stats ( DB_ID(N'tempdb'), OBJECT_ID(N'tempdb..#Test', N'U'), 1, 1, DEFAULT ) AS S ; Let’s look now at the Properties window when the Clustered Index Seek from the second query is selected: There is just one seek operation, which starts at the root of the index and navigates the B-tree looking for the first key that matches the Start range condition (id >= 101).  It then continues to read records at the leaf level of the index (following links between leaf-level pages if necessary) until it finds a row that does not meet the End range condition (id <= 169).  Every row that meets the seek range condition is also tested against the Residual Predicate highlighted above (id % 10 > 0), and is only returned if it matches that as well. You will not be surprised that the single seek (with a range scan and residual predicate) is much more efficient than 63 singleton seeks.  It is not 63 times more efficient (as the logical reads comparison would suggest), but it is around three times faster.  Let’s run both query forms 10,000 times and measure the elapsed time: DECLARE @i INTEGER, @n INTEGER = 10000, @s DATETIME = GETDATE() ; SET NOCOUNT ON; SET STATISTICS XML OFF; ; WHILE @n > 0 BEGIN SELECT @i = T.id FROM #Test AS T WHERE T.id IN ( 101,102,103,104,105,106,107,108,109, 111,112,113,114,115,116,117,118,119, 121,122,123,124,125,126,127,128,129, 131,132,133,134,135,136,137,138,139, 141,142,143,144,145,146,147,148,149, 151,152,153,154,155,156,157,158,159, 161,162,163,164,165,166,167,168,169 ) ; SET @n -= 1; END ; PRINT DATEDIFF(MILLISECOND, @s, GETDATE()) ; GO DECLARE @i INTEGER, @n INTEGER = 10000, @s DATETIME = GETDATE() ; SET NOCOUNT ON ; WHILE @n > 0 BEGIN SELECT @i = T.id FROM #Test AS T WHERE T.id >= 101 AND T.id <= 169 AND T.id % 10 > 0 ; SET @n -= 1; END ; PRINT DATEDIFF(MILLISECOND, @s, GETDATE()) ; On my laptop, running SQL Server 2008 build 4272 (SP2 CU2), the IN form of the query takes around 830ms and the range query about 300ms.  The main point of this post is not performance, however – it is meant as an introduction to the next few parts in this mini-series that will continue to explore scans and seeks in detail. When is a seek not a seek?  When it is 63 seeks © Paul White 2011 email: [email protected] twitter: @SQL_kiwi

    Read the article

  • Book Review: Brownfield Application Development in .NET

    - by DotNetBlues
    I recently finished reading the book Brownfield Application Development in .NET by Kyle Baley and Donald Belcham.  The book is available from Manning.  First off, let me say that I'm a huge fan of Manning as a publisher.  I've found their books to be top-quality, over all.  As a Kindle owner, I also appreciate getting an ebook copy along with the dead tree copy.  I find ebooks to be much more convenient to read, but hard-copies are easier to reference. The book covers, surprisingly enough, working with brownfield applications.  Which is well and good, if that term has meaning to you.  It didn't for me.  Without retreading a chunk of the first chapter, the authors break code bases into three broad categories: greenfield, brownfield, and legacy.  Greenfield is, essentially, new development that hasn't had time to rust and is (hopefully) being approached with some discipline.  Legacy applications are those that are more or less stable and functional, that do not expect to see a lot of work done to them, and are more likely to be replaced than reworked. Brownfield code is the gray (brown?) area between the two and the authors argue, quite effectively, that it is the most likely state for an application to be in.  Brownfield code has, in some way, been allowed to tarnish around the edges and can be difficult to work with.  Although I hadn't realized it, most of the code I've worked on has been brownfield.  Sometimes, there's talk of scrapping and starting over.  Sometimes, the team dismisses increased discipline as ivory tower nonsense.  And, sometimes, I've been the ignorant culprit vexing my future self. The book is broken into two major sections, plus an introduction chapter and an appendix.  The first section covers what the authors refer to as "The Ecosystem" which consists of version control, build and integration, testing, metrics, and defect management.  The second section is on actually writing code for brownfield applications and discusses object-oriented principles, architecture, external dependencies, and, of course, how to deal with these when coming into an existing code base. The ecosystem section is just shy of 140 pages long and brings some real meat to the matter.  The focus on "pain points" immediately sets the tone as problem-solution, rather than academic.  The authors also approach some of the topics from a different angle than some essays I've read on similar topics.  For example, the chapter on automated testing is on just that -- automated testing.  It's all well and good to criticize a project as conflating integration tests with unit tests, but it really doesn't make anyone's life better.  The discussion on testing is more focused on the "right" level of testing for existing projects.  Sometimes, an integration test is the best you can do without gutting a section of functional code.  Even if you can sell other developers and/or management on doing so, it doesn't actually provide benefit to your customers to rewrite code that works.  This isn't to say the authors encourage sloppy coding.  Far from it.  Just that they point out the wisdom of ignoring the sleeping bear until after you deal with the snarling wolf. The other sections take a similarly real-world, workable approach to the pain points they address.  As the section moves from technical solutions like version control and continuous integration (CI) to the softer, process issues of metrics and defect tracking, the authors begin to gently suggest moving toward a zero defect count.  While that really sounds like an unreasonable goal for a lot of ongoing projects, it's quite apparent that the authors have first-hand experience with taming some gruesome projects.  The suggestions are grounded and workable, and the difficulty of some situations is explicitly acknowledged. I have to admit that I started getting bored by the end of the ecosystem section.  No matter how valuable I think a good project manager or business analyst is to a successful ALM, at the end of the day, I'm a gear-head.  Also, while I agreed with a lot of the ecosystem ideas, in theory, I didn't necessarily feel that a lot of the single-developer projects that I'm often involved in really needed that level of rigor.  It's only after reading the sidebars and commentary in the coding section that I had the context for the arguments made in favor of a strong ecosystem supporting the development process.  That isn't to say that I didn't support good product management -- indeed, I've probably pushed too hard, on occasion, for a strong ALM outside of just development.  This book gave me deeper insight into why some corners shouldn't be cut and how damaging certain sins of omission can be. The code section, though, kept me engaged for its entirety.  Many technical books can be used as reference material from day one.  The authors were clear, however, that this book is not one of these.  The first chapter of the section (chapter seven, over all) addresses object oriented (OO) practices.  I've read any number of definitions, discussions, and treatises on OO.  None of the chapter was new to me, but it was a good review, and I'm of the opinion that it's good to review the foundations of what you do, from time to time, so I didn't mind. The remainder of the book is really just about how to apply OOP to existing code -- and, just because all your code exists in classes does not mean that it's object oriented.  That topic has the potential to be extremely condescending, but the authors miraculously managed to never once make me feel like a dolt or that they were wagging their finger at me for my prior sins.  Instead, they continue the "pain points" and problem-solution presentation to give concrete examples of how to apply some pretty academic-sounding ideas.  That's a point worth emphasizing, as my experience with most OO discussions is that they stay in the academic realm.  This book gives some very, very good explanations of why things like the Liskov Substitution Principle exist and why a corporate programmer should even care.  Even if you know, with absolute certainty, that you'll never have to work on an existing code-base, I would recommend this book just for the clarity it provides on OOP. This book goes beyond just theory, or even real-world application.  It presents some methods for fixing problems that any developer can, and probably will, encounter in the wild.  First, the authors address refactoring application layers and internal dependencies.  Then, they take you through those layers from the UI to the data access layer and external dependencies.  Finally, they come full circle to tie it all back to the overall process.  By the time the book is done, you're left with a lot of ideas, but also a reasonable plan to begin to improve an existing project structure. Throughout the book, it's apparent that the authors have their own preferred methodology (TDD and domain-driven design), as well as some preferred tools.  The "Our .NET Toolbox" is something of a neon sign pointing to that latter point.  They do not beat the reader over the head with anything resembling a "One True Way" mentality.  Even for the most emphatic points, the tone is quite congenial and helpful.  With some of the near-theological divides that exist within the tech community, I found this to be one of the more remarkable characteristics of the book.  Although the authors favor tools that might be considered Alt.NET, there is no reason the advice and techniques given couldn't be quite successful in a pure Microsoft shop with Team Foundation Server.  For that matter, even though the book specifically addresses .NET, it could be applied to a Java and Oracle shop, as well.

    Read the article

  • CodePlex Daily Summary for Monday, May 26, 2014

    CodePlex Daily Summary for Monday, May 26, 2014Popular ReleasesClosedXML - The easy way to OpenXML: ClosedXML 0.71.1: More performance improvements. It's faster and consumes less memory.Role Based Views in Microsoft Dynamics CRM 2011: Role Based Views in CRM 2011 and 2013 - 1.1.0.0: Issues fixed in this build: 1. Works for CRM 2013 2. Lookup view not getting blockedSimCityPak: SimCityPak 0.3.1.0: Main New Features: Fixed Importing of Instance Names (get rid of the Dutch translations) Added advanced editor for Decal Dictionaries Added possibility to import .PNG to generate new decals Added advanced editor for Path display entriesSimple Connect To Db: SimpleConnectToDb_v1: SimpleConnectToDb_v1CRM 2011 / CRM 2013 Form Helper: v2014.05.25: v2014.05.25 Added PhoneFormat & PhoneFormatAreaCode v2014.05.24 Initial ReleaseCreate Word documents without MS Word: Release 3.0: Add support for Sections, Sections Headers and Footers and right to left languages.Corporate News App for SharePoint 2013: CorporateNewsApp v1.6.2.0: Important note This version contains a major bug fix about the generic error "Request failed. Unexpected response data from server null" This error occurs on SharePoint Online only, following an update of the Javascript API after May 2014. If you have installed this application manually in your applications company catalog, you can download the CorporateNewsApp.app file in the zip archive and update it manually. If you have installed this application directly from the SharePoint Store, it ...DevOS: DevOS: Plugin-system added Including:DevOS.exe DevOS API.dll Files must be in the some folderTiny Deduplicator: Tiny Deduplicator 1.0.1.0: Increased version number to 1.0.1.0 Moved all options to a separate 'Options' dialog window. Allows the user to specify a selection strategy which will help when dealing with large numbers of duplicate files. Available options are "None," "Keep First," and "Keep Last"C64 Studio: 3.5: Add: BASIC renumber function Add: !PET pseudo op Add: elseif for !if, } else { pseudo op Add: !TRACE pseudo op Add: Watches are saved/restored with a solution Add: Ctrl-A works now in export assembly controls Add: Preliminary graphic import dialog (not fully functional yet) Add: range and block selection in sprite/charset editor (Shift-Click = range, Alt-Click = block) Fix: Expression evaluator could miscalculate when both division and multiplication were in an expression without parenthesisSEToolbox: SEToolbox 01.031.009 Release 1: Added mirroring of ConveyorTubeCurved. Updated Ship cube rotation to rotate ship back to original location (cubes are reoriented but ship appears no different to outsider), and to rotate Grouped items. Repair now fixes the loss of Grouped controls due to changes in Space Engineers 01.030. Added export asteroids. Rejoin ships will merge grouping and conveyor systems (even though broken ships currently only maintain the Grouping on one part of the ship). Installation of this version wi...Player Framework by Microsoft: Player Framework for Windows and WP v2.0: Support for new Universal and Windows Phone 8.1 projects for both Xaml and JavaScript projects. See a detailed list of improvements, breaking changes and a general overview of version 2 ADDITIONAL DOWNLOADSSmooth Streaming Client SDK for Windows 8 Applications Smooth Streaming Client SDK for Windows 8.1 Applications Smooth Streaming Client SDK for Windows Phone 8.1 Applications Microsoft PlayReady Client SDK for Windows 8 Applications Microsoft PlayReady Client SDK for Windows 8.1 Applicat...TerraMap (Terraria World Map Viewer): TerraMap 1.0.6: Added support for the new Terraria v1.2.4 update. New items, walls, and tiles Added the ability to select multiple highlighted block types. Added a dynamic, interactive highlight opacity slider, making it easier to find highlighted tiles with dark colors (and fixed blurriness from 1.0.5 alpha). Added ability to find Enchanted Swords (in the stone) and Water Bolt books Fixed Issue 35206: Hightlight/Find doesn't work for Demon Altars Fixed finding Demon Hearts/Shadow Orbs Fixed inst...DotNet.Highcharts: DotNet.Highcharts 4.0 with Examples: DotNet.Highcharts 4.0 Tested and adapted to the latest version of Highcharts 4.0.1 Added new chart type: Heatmap Added new type PointPlacement which represents enumeration or number for the padding of the X axis. Changed target framework from .NET Framework 4 to .NET Framework 4.5. Closed issues: 974: Add 'overflow' property to PlotOptionsColumnDataLabels class 997: Split container from JS 1006: Series/Categories with numeric names don't render DotNet.Highcharts.Samples Updated s...ConEmu - Windows console with tabs: ConEmu 140523 [Alpha]: ConEmu - developer build x86 and x64 versions. Written in C++, no additional packages required. Run "ConEmu.exe" or "ConEmu64.exe". Some useful information you may found: http://superuser.com/questions/tagged/conemu http://code.google.com/p/conemu-maximus5/wiki/ConEmuFAQ http://code.google.com/p/conemu-maximus5/wiki/TableOfContents If you want to use ConEmu in portable mode, just create empty "ConEmu.xml" file near to "ConEmu.exe" Aspose for Apache POI: Missing Features of Apache POI SL - v 1.1: Release contain the Missing Features in Apache POI SL SDK in Comparison with Aspose.Slides for dealing with Microsoft Power Point. What's New ?Following Examples: Managing Slide Transitions Manage Smart Art Adding Media Player Adding Audio Frame to Slide Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.3: Added CompressLogs option to the config file. Each Install / Uninstall creates a timestamped zip file with all MSI and PSAppDeployToolkit logs contained within Added variable expansion to all paths in the configuration file Added documentation for each of the Toolkit internal variables that can be used Changed Install-MSUpdates to continue if any errors are encountered when installing updates Implement /Force parameter on Update-GroupPolicy (ensure that any logoff message is ignored) ...WordMat: WordMat v. 1.07: A quick fix because scientific notation was broken in v. 1.06 read more at http://wordmat.blogspot.com????: 《????》: 《????》(c???)??“????”???????,???????????????C?????????。???????,???????????????????????. ??????????????????????????????????;????????????????????????????。Mini SQL Query: Mini SQL Query (1.0.72.457): Apologies for the previous update! FK issue fixed and also a template data cache issue.New ProjectsASP.Net MCV4 Simplified Code Samples: This project intended to simplify the same. In this project each task is implemented with minimum lines of code to reduces complicity.Calvin: net???CodeLatino by Latinosoft: A Modified version for codeShow -- Probably taking more than a month.freeasyBackup: A free and easy to use Backup Tool for everyone. Without any cloud restrictions. freeasyExplorer: A free and easy to use File Explorer for everyone.openPDFspeedreader: #spritz #pdfreader #speedreader PDF Editor to Edit PDF Files in your ASP.NET Applications: This sample application allows the users to edit PDF files online using Aspose.Pdf for .NET.SharePoint World Cup 2013: world cup 2014SSAS Long Running Query Performance Helper: This utility helps investigate long running multidimensional or mining queries in discovery, de-parameterization and re-parameterization back to source format.

    Read the article

  • SQL SERVER – Weekly Series – Memory Lane – #031

    - by Pinal Dave
    Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Find Table without Clustered Index – Find Table with no Primary Key Clustered index is very important concept for any table. They impact the performance very heavily. Here is a quick script to find tables without a clustered index. Replace TEXT with VARCHAR(MAX) – Stop using TEXT, NTEXT, IMAGE Data Types Question: “Is VARCHAR (MAX) big enough to store the TEXT field?” Answer: “Yes, VARCHAR(MAX) is big enough to accommodate TEXT field. TEXT, NTEXT and IMAGE data types of SQL Server 2000 will be deprecated in a future version of SQL Server, SQL Server 2005 provides backward compatibility to data types but it is recommended to use new data types which are VARHCAR (MAX), NVARCHAR (MAX) and VARBINARY (MAX).” Limiting Result Sets by Using TABLESAMPLE – Examples Introduced in SQL Server 2005, TABLESAMPLE allows you to extract a sampling of rows from a table in the FROM clause. The rows retrieved are random and they are are not in any order. This sampling can be based on a percentage of number of rows. You can use TABLESAMPLE when only a sampling of rows is necessary for the application instead of a full result set. User Defined Functions (UDF) Limitations UDF have its own advantage and usage but in this article we will see the limitation of UDF. Things UDF can not do and why Stored Procedure are considered as more flexible then UDFs. Stored Procedure are more flexibility then User Defined Functions(UDF). However, this blog post is a good read to know what are the limitations of UDF. Change Database Compatible Level – Backward Compatibility For a long time SQL Server stayed on the compatibility level of 80 which is of SQL Server 2000. However, as soon as SQL Server 2005 introduced the issue of compatibility was quite a major issue. Since that time MS has been releasing the versions at every 2-3 years, changing compatibility is a ever popular topic. In this blog post, we learn how we can do the same using T-SQL. We can also do the same using SSMS and here is the blog post for the same: Change Database Compatible Level – Backward Compatibility – Part 2 – Management Studio. Constraint on VARCHAR(MAX) Field To Limit It Certain Length How can I limit the VARCHAR(MAX) field with maximum length of 12500 characters only. His Question was valid as our application was allowed 12500 characters. First of all – this requirement is bit strange but if someone wants to do the same, they can do it as described in this blog post. 2008 UNPIVOT Table Example Understanding UNPIVOT can be very complicated at times. In this blog post, I have attempted to explain the same concept in very simple words. Create Default Constraint Over Table Column A simple straight to script blog post – I still use this blog quite many times for my own reference. UDF – Get the Day of the Week Function It took me 4 iteration to find this very simple function which can immediately get the day of the week in a single line. 2009 Find Hostname and Current Logged In User Name There are two tricks listed in this blog post where users can find out the hostname and current logged user name immediately and very easily. Interesting Observation of Logon Trigger On All Servers When I was doing a project, I made an interesting observation of executing a logon trigger multiple times. It was absolutely unexpected for me! As I was logging only once, naturally, I was expecting the entry only once. However, it did it multiple times on different threads – indeed an eccentric phenomenon at first sight! Difference Between Candidate Keys and Primary Key One needs to be very careful in selecting the Primary Key as an incorrect selection can adversely impact the database architect and future normalization. For a Candidate Key to qualify as a Primary Key, it should be Non-NULL and unique in any domain. I have observed quite often that Primary Keys are seldom changed. I would like to have your feedback on not changing a Primary Key. Create Multiple Filegroup For Single Database Why should one create multiple file group for any database and what are the advantages of the same. In this blog post, I explain the same in detail. List All Objects Created on All Filegroups in Database In this blog post we discuss the essential question – “How can I find which object belongs to which filegroup. Is there any way to know this?” 2010 DATE and TIME in SQL Server 2008 When DATE is converted to DATETIME it adds the of midnight. When TIME is converted to DATETIME it adds the date of 1900 and it is something one wants to consider if you are going to run scripts from SQL Server 2008 to earlier version with CONVERT. Disabled Index and Update Statistics If you do not need a nonclustered index, I suggest you to drop it as keeping them disabled is an overhead on your system. This is because every time the statistics are updated for system all the statistics for disabled indexes are also updated. Precision of SMALLDATETIME – A 1 Minute Precision The precision of the datatype SMALLDATETIME is 1 minute. It discards the seconds by rounding up or rounding down any seconds greater than zero. 2011 Getting Columns Headers without Result Data – SET FMTONLY ON SET FMTONLY ON returns only metadata to the client. It can be used to test the format of the response without actually running the query. When this setting is ON the resultset only have headers of the results but no data. Copy Database from Instance to Another Instance – Copy Paste in SQL Server SQL Server has a feature which copy database from one database to another database and it can be automated as well using SSIS. Make sure you have SQL Server Agent Turned on as this feature will create a job. Puzzle – SELECT * vs SELECT COUNT(*) If you have ever wondered SELECT * gives error when executed alone but SELECT COUNT(*) does not. Why? in that case, you should read this blog post. Creating All New Database with Full Recovery Model This blog post is very based on very interesting story where the user wants to do something by default for every single new database created. Model database is a secret weapon which should be used very carefully and with proper evalution. If used carefully this can be a very much beneficiary when we need a newly created database behave in certain fashion. 2012 In year 2012 I had two interesting series ran on the blog. If there is no fun in learning, the learning becomes a burden. For the same reason, I had decided to build a three part quiz around SEQUENCE. The quiz was to identify the next value of the sequence. I encourage all of you to take part in this fun quiz. Guess the Next Value – Puzzle 1 Guess the Next Value – Puzzle 2 Guess the Next Value – Puzzle 3 Can anyone remember their final day of schooling?  This is probably a silly question because – of course you can!  Many people mark this as the most exciting, happiest day of their life.  It marks the end of testing, the end of following rules set by teachers, and the beginning of finally being able to earn money and work in your chosen field. Read five part series on developer training subject Developer Training - Importance and Significance - Part 1 Developer Training – Employee Morals and Ethics – Part 2 Developer Training – Difficult Questions and Alternative Perspective - Part 3 Developer Training – Various Options for Developer Training – Part 4 Developer Training – A Conclusive Summary- Part 5 Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Checking who is connected to your server, with PowerShell.

    - by Fatherjack
    There are many occasions when, as a DBA, you want to see who is connected to your SQL Server, along with how they are connecting and what sort of activities they are carrying out. I’m going to look at a couple of ways of getting this information and compare the effort required and the results achieved of each. SQL Server comes with a couple of stored procedures to help with this sort of task – sp_who and its undocumented counterpart sp_who2. There is also the pumped up version of these called sp_whoisactive, written by Adam Machanic which does way more than these procedures. I wholly recommend you try it out if you don’t already know how it works. When it comes to serious interrogation of your SQL Server activity then it is absolutely indispensable. Anyway, back to the point of this blog, we are going to look at getting the information from sp_who2 for a remote server. I wrote this Powershell script a week or so ago and was quietly happy with it for a while. I’m relatively new to Powershell so forgive both my rather low threshold for entertainment and the fact that something so simple is a moderate achievement for me. $Server = 'SERVERNAME' $SMOServer = New-Object Microsoft.SQLServer.Management.SMO.Server $Server # connection and query stuff         $ConnectionStr = "Server=$Server;Database=Master;Integrated Security=True" $Query = "EXEC sp_who2" $Connection = new-object system.Data.SQLClient.SQLConnection $Table = new-object "System.Data.DataTable" $Connection.connectionstring = $ConnectionStr try{ $Connection.open() $Command = $Connection.CreateCommand() $Command.commandtext = $Query $result = $Command.ExecuteReader() $Table.Load($result) } catch{ # Show error $error[0] | format-list -Force } $Title = "Data access processes (" + $Table.Rows.Count + ")" $Table | Out-GridView -Title $Title $Connection.close() So this is pretty straightforward, create an SMO object that represents our chosen server, define a connection to the database and a table object for the results when we get them, execute our query over the connection, load the results into our table object and then, if everything is error free display these results to the PowerShell grid viewer. The query simply gets the results of ‘EXEC sp_who2′ for us. Depending on how many connections there are will influence how long the query runs. The grid viewer lets me sort and search the results so it can be a pretty handy way to locate troublesome connections. Like I say, I was quite pleased with this, it seems a pretty simple script and was working well for me, I have added a few parameters to control the output and give me more specific details but then I see a script that uses the $SMOServer object itself to provide the process information and saves having to define the connection object and query specifications. $Server = 'SERVERNAME' $SMOServer = New-Object Microsoft.SQLServer.Management.SMO.Server $Server $Processes = $SMOServer.EnumProcesses() $Title = "SMO processes (" + $Processes.Rows.Count + ")" $Processes | Out-GridView -Title $Title Create the SMO object of our server and then call the EnumProcesses method to get all the process information from the server. Staggeringly simple! The results are a little different though. Some columns are the same and we can see the same basic information so my first thought was to which runs faster – so that I can get my results more quickly and also so that I place less stress on my server(s). PowerShell comes with a great way of testing this – the Measure-Command function. All you have to do is wrap your piece of code in Measure-Command {[your code here]} and it will spit out the time taken to execute the code. So, I placed both of the above methods of getting SQL Server process connections in two Measure-Command wrappers and pressed F5! The Powershell console goes blank for a while as the code is executed internally when Measure-Command is used but the grid viewer windows appear and the console shows this. You can take the output from Measure-Command and format it for easier reading but in a simple comparison like this we can simply cross refer the TotalMilliseconds values from the two result sets to see how the two methods performed. The query execution method (running EXEC sp_who2 ) is the first set of timings and the SMO EnumProcesses is the second. I have run these on a variety of servers and while the results vary from execution to execution I have never seen the SMO version slower than the other. The difference has varied and the time for both has ranged from sub-second as we see above to almost 5 seconds on other systems. This difference, I would suggest is partly due to the cost overhead of having to construct the data connection and so on where as the SMO EnumProcesses method has the connection to the server already in place and just needs to call back the process information. There is also the difference in the data sets to consider. Let’s take a look at what we get and where the two methods differ Query execution method (sp_who2) SMO EnumProcesses Description - Urn What looks like an XML or JSON representation of the server name and the process ID SPID Spid The process ID Status Status The status of the process Login Login The login name of the user executing the command HostName Host The name of the computer where the  process originated BlkBy BlockingSpid The SPID of a process that is blocking this one DBName Database The database that this process is connected to Command Command The type of command that is executing CPUTime Cpu The CPU activity related to this process DiskIO - The Disk IO activity related to this process LastBatch - The time the last batch was executed from this process. ProgramName Program The application that is facilitating the process connection to the SQL Server. SPID1 - In my experience this is always the same value as SPID. REQUESTID - In my experience this is always 0 - Name In my experience this is always the same value as SPID and so could be seen as analogous to SPID1 from sp_who2 - MemUsage An indication of the memory used by this process but I don’t know what it is measured in (bytes, Kb, Mb…) - IsSystem True or False depending on whether the process is internal to the SQL Server instance or has been created by an external connection requesting data. - ExecutionContextID In my experience this is always 0 so could be analogous to REQUESTID from sp_who2. Please note, these are my own very brief descriptions of these columns, detail can be found from MSDN for columns in the sp_who results here http://msdn.microsoft.com/en-GB/library/ms174313.aspx. Where the columns are common then I would use that description, in other cases then the information returned is purely for interpretation by the reader. Rather annoyingly both result sets have useful information that the other doesn’t. sp_who2 returns Disk IO and LastBatch information which is really useful but the SMO processes method give you IsSystem and MemUsage which have their place in fault diagnosis methods too. So which is better? On reflection I think I prefer to use the sp_who2 method primarily but knowing that the SMO Enumprocesses method is there when I need it is really useful and I’m sure I’ll use it regularly. I’m OK with the fact that it is the slower method because Measure-Command has shown me how close it is to the other option and that it really isn’t a large enough margin to matter.

    Read the article

  • Agilist, Heal Thyself!

    - by Dylan Smith
    I’ve been meaning to blog about a great experience I had earlier in the year at Prairie Dev Con Calgary.  Myself and Steve Rogalsky did a session that we called “Agilist, Heal Thyself!”.  We used a format that was new to me, but that Steve had seen used at another conference.  What we did was start by asking the audience to give us a list of challenges they had had when adopting agile.  We wrote them all down, then had everybody vote on the most interesting ones.  Then we split into two groups, and each group was assigned one of the agile challenges.  We had 20 minutes to discuss the challenge, and suggest solutions or approaches to improve things.  At the end of the 20 minutes, each of the groups gave a brief summary of their discussion and learning's, then we mixed up the groups and repeated with another 2 challenges. The 2 groups I was part of had some really interesting discussions, and suggestions: Unfinished Stories at the end of Sprints The first agile challenge we tackled, was something that every single Scrum team I have worked with has struggled with.  What happens when you get to the end of a Sprint, and there are some stories that are only partially completed.  The team in question was getting very de-moralized as they felt that every Sprint was a failure as they never had a set of fully completed stories. How do you avoid this? and/or what do you do when it happens? There were 2 pieces of advice that were well received: 1. Try to bring stories to completion before starting new ones.  This is advice I give all my Scrum teams.  If you have a 3-week sprint, what happens all too often is you get to the end of week 2, and a lot of stories are almost done; but almost none are completely done.  This is a Bad Thing.  I encourage the teams I work with to only start a new story as a very last resort.  If you finish your task look at the stories in progress and see if there’s anything you can do to help before moving onto a new story.  In the daily standup, put a focus on seeing what stories got completed yesterday, if a few days go by with none getting completed, be sure this fact is visible to the team and do something about it.  Something I’ve been doing recently is introducing WIP (Work In Progress) limits while using Scrum.  My current team has 2-week sprints, and we usually have about a dozen or stories in a sprint.  We instituted a WIP limit of 4 stories.  If 4 stories have been started but not finished then nobody is allowed to start new stories.  This made it obvious very quickly that our QA tasks were our bottleneck (we have 4 devs, but only 1.5 testers).  The WIP limit forced the developers to start to pickup QA tasks before moving onto the next dev tasks, and we ended our sprints with many more stories completely finished than we did before introducing WIP limits. 2. Rather than using time-boxed sprints, why not just do away with them altogether and go to a continuous flow type approach like KanBan.  Limit WIP to keep things under control, but don’t have a fixed time box at the end of which all tasks are supposed to be done.  This eliminates the problem almost entirely.  At some points in the project (releases) you need to be able to burn down all the half finished stories to get a stable release build, but this probably occurs less often than every sprint, and there are alternative approaches to achieve it using branching strategies rather than forcing your team to try to get to Zero WIP every 2-weeks (e.g. when you are ready for a release, create a new branch for any new stories, but finish all existing stories in the current branch and release it). Trying to Introduce Agile into a team with previous Bad Agile Experiences One of the agile adoption challenges somebody described, was he was in a leadership role on a team he had recently joined – lets call him Dave.  This team was currently very waterfall in their ALM process, but they were about to start on a new green-field project.  Dave wanted to use this new project as an opportunity to do things the “right way”, using an Agile methodology like Scrum, adopting TDD, automated builds, proper branching strategies, etc.  The problem he was facing is everybody else on the team had previously gone through an “Agile Adoption” that was a horrible failure.  Dave blamed this failure on the consultant brought in previously to lead this agile transition, but regardless of the reason, the team had very negative feelings towards agile, and was very resistant to trying it out again.  Dave possibly had the authority to try to force the team to adopt Agile practices, but we all know that doesn’t work very well.  What was Dave to do? Ultimately, the best advice was to question *why* did Dave want to adopt all these various practices. Rather than trying to convince his team that these were the “right way” to run a dev project, and trying to do a Big Bang approach to introducing change.  He would be better served by identifying problems the team currently faces, have a discussion with the team to get everybody to agree that specific problems existed, then have an open discussion about ways to address those problems.  This way Dave could incrementally introduce agile practices, and he doesn’t even need to identify them as “agile” practices if he doesn’t want to.  For example, when we discussed with Dave, he said probably the teams biggest problem was long periods without feedback from users, then finding out too late that the software is not going to meet their needs.  Rather than Dave jumping right to introducing Scrum and all it entails, it would be easier to get buy-in from team if he framed it as a discussion of existing problems, and brainstorming possible solutions.  And possibly most importantly, don’t try to do massive changes all at once with a team that has not bought-into those changes.  Taking an incremental approach has a greater chance of success. I see something similar in my day job all the time too.  Clients who for one reason or another claim to not be fans of agile (or not ready for agile yet).  But then they go on to ask me to help them get shorter feedback cycles, quicker delivery cycles, iterative development processes, etc.  It’s kind of funny at times, sometimes you just need to phrase the suggestions in terms they are using and avoid the word “agile”. PS – I haven’t blogged all that much over the past couple of years, but in an attempt to motivate myself, a few of us have accepted a blogger challenge.  There’s 6 of us who have all put some money into a pool, and the agreement is that we each need to blog at least once every 2-weeks.  The first 2-week period that we miss we’re eliminated.  Last person standing gets the money.  So expect at least one blog post every couple of weeks for the near future (I hope!).  And check out the blogs of the other 5 people in this blogger challenge: Steve Rogalsky: http://winnipegagilist.blogspot.ca Aaron Kowall: http://www.geekswithblogs.net/caffeinatedgeek Tyler Doerkson: http://blog.tylerdoerksen.com David Alpert: http://www.spinthemoose.com Dave White: http://www.agileramblings.com (note: site not available yet.  should be shortly or he owes me some money!)

    Read the article

  • Windows Azure Virtual Machine Readiness and Capacity Assessment for SQL Server

    - by SQLOS Team
    Windows Azure Virtual Machine Readiness and Capacity Assessment for Windows Server Machine Running SQL Server With the release of MAP Toolkit 8.0 Beta, we have added a new scenario to assess your Windows Azure Virtual Machine Readiness. The MAP 8.0 Beta performs a comprehensive assessment of Windows Servers running SQL Server to determine you level of readiness to migrate an on-premise physical or virtual machine to Windows Azure Virtual Machines. The MAP Toolkit then offers suggested changes to prepare the machines for migration, such as upgrading the operating system or SQL Server. MAP Toolkit 8.0 Beta is available for download here Your participation and feedback is very important to make the MAP Toolkit work better for you. We encourage you to participate in the beta program and provide your feedback at [email protected] or through one of our surveys. Now, let’s walk through the MAP Toolkit task for completing the Windows Azure Virtual Machine assessment and capacity planning. The tasks include the following: Perform an inventory View the Windows Azure VM Readiness results and report Collect performance data for determine VM sizing View the Windows Azure Capacity results and report Perform an inventory: 1. To perform an inventory against a single machine or across a complete environment, choose Perform an Inventory to launch the Inventory and Assessment Wizard as shown below: 2. After the Inventory and Assessment Wizard launches, select either the Windows computers or SQL Server scenario to inventory Windows machines. HINT: If you don’t care about completely inventorying a machine, just select the SQL Server scenario. Click Next to Continue. 3. On the Discovery Methods page, select how you want to discover computers and then click Next to continue. Description of Discovery Methods: Use Active Directory Domain Services -- This method allows you to query a domain controller via the Lightweight Directory Access Protocol (LDAP) and select computers in all or specific domains, containers, or OUs. Use this method if all computers and devices are in AD DS. Windows networking protocols --  This method uses the WIN32 LAN Manager application programming interfaces to query the Computer Browser service for computers in workgroups and Windows NT 4.0–based domains. If the computers on the network are not joined to an Active Directory domain, use only the Windows networking protocols option to find computers. System Center Configuration Manager (SCCM) -- This method enables you to inventory computers managed by System Center Configuration Manager (SCCM). You need to provide credentials to the System Center Configuration Manager server in order to inventory the managed computers. When you select this option, the MAP Toolkit will query SCCM for a list of computers and then MAP will connect to these computers. Scan an IP address range -- This method allows you to specify the starting address and ending address of an IP address range. The wizard will then scan all IP addresses in the range and inventory only those computers. Note: This option can perform poorly, if many IP addresses aren’t being used within the range. Manually enter computer names and credentials -- Use this method if you want to inventory a small number of specific computers. Import computer names from a files -- Using this method, you can create a text file with a list of computer names that will be inventoried. 4. On the All Computers Credentials page, enter the accounts that have administrator rights to connect to the discovered machines. This does not need to a domain account, but needs to be a local administrator. I have entered my domain account that is an administrator on my local machine. Click Next after one or more accounts have been added. NOTE: The MAP Toolkit primarily uses Windows Management Instrumentation (WMI) to collect hardware, device, and software information from the remote computers. In order for the MAP Toolkit to successfully connect and inventory computers in your environment, you have to configure your machines to inventory through WMI and also allow your firewall to enable remote access through WMI. The MAP Toolkit also requires remote registry access for certain assessments. In addition to enabling WMI, you need accounts with administrative privileges to access desktops and servers in your environment. 5. On the Credentials Order page, select the order in which want the MAP Toolkit to connect to the machine and SQL Server. Generally just accept the defaults and click Next. 6. On the Enter Computers Manually page, click Create to pull up at dialog to enter one or more computer names. 7. On the Summary page confirm your settings and then click Finish. After clicking Finish the inventory process will start, as shown below: Windows Azure Readiness results and report After the inventory progress has completed, you can review the results under the Database scenario. On the tile, you will see the number of Windows Server machine with SQL Server that were analyzed, the number of machines that are ready to move without changes and the number of machines that require further changes. If you click this Azure VM Readiness tile, you will see additional details and can generate the Windows Azure VM Readiness Report. After the report is generated, select View | Saved Reports and Proposals to view the location of the report. Open up WindowsAzureVMReadiness* report in Excel. On the Windows tab, you can see the results of the assessment. This report has a column for the Operating System and SQL Server assessment and provides a recommendation on how to resolve, if there a component is not supported. Collect Performance Data Launch the Performance Wizard to collect performance information for the Windows Server machines that you would like the MAP Toolkit to suggest a Windows Azure VM size for. Windows Azure Capacity results and report After the performance metrics are collected, the Azure VM Capacity title will display the number of Virtual Machine sizes that are suggested for the Windows Server and Linux machines that were analyzed. You can then click on the Azure VM Capacity tile to see the capacity details and generate the Windows Azure VM Capacity Report. Within this report, you can view the performance data that was collected and the Virtual Machine sizes.   MAP Toolkit 8.0 Beta is available for download here Your participation and feedback is very important to make the MAP Toolkit work better for you. We encourage you to participate in the beta program and provide your feedback at [email protected] or through one of our surveys. Useful References: Windows Azure Homepage How to guides for Windows Azure Virtual Machines Provisioning a SQL Server Virtual Machine on Windows Azure Windows Azure Pricing     Peter Saddow Senior Program Manager – MAP Toolkit Team

    Read the article

  • Java EE 7 Survey Results!

    - by reza_rahman
    On November 8th, the Java EE EG posted a survey to gather broad community feedback on a number of critical open issues. For reference, you can find the original survey here. We kept the survey open for about three weeks until November 30th. To our delight, over 1100 developers took time out of their busy lives to let their voices be heard! The results of the survey were sent to the EG on December 12th. The subsequent EG discussion is available here. The exact summary sent to the EG is available here. We would like to take this opportunity to thank each and every one the individuals who took the survey. It is very appreciated, encouraging and worth it's weight in gold. In particular, I tried to capture just some of the high-quality, intelligent, thoughtful and professional comments in the summary to the EG. I highly encourage you to continue to stay involved, perhaps through the Adopt-a-JSR program. We would also like to sincerely thank java.net, JavaLobby, TSS and InfoQ for helping spread the word about the survey. Below is a brief summary of the results... APIs to Add to Java EE 7 Full/Web Profile The first question asked which of the four new candidate APIs (WebSocket, JSON-P, JBatch and JCache) should be added to the Java EE 7 Full and Web profile respectively. As the following graph shows, there was significant support for adding all the new APIs to the full profile: Support is relatively the weakest for Batch 1.0, but still good. A lot of folks saw WebSocket 1.0 as a critical technology with comments such as this one: "A modern web application needs Web Sockets as first class citizens" While it is clearly seen as being important, a number of commenters expressed dissatisfaction with the lack of a higher-level JSON data binding API as illustrated by this comment: "How come we don't have a Data Binding API for JSON" JCache was also seen as being very important as expressed with comments like: "JCache should really be that foundational technology on which other specs have no fear to depend on" The results for the Web Profile is not surprising. While there is strong support for adding WebSocket 1.0 and JSON-P 1.0 to the Web Profile, support for adding JCache 1.0 and Batch 1.0 is relatively weak. There was actually significant opposition to adding Batch 1. 0 (with 51.8% casting a 'No' vote). Enabling CDI by Default The second question asked was whether CDI should be enabled in Java EE environments by default. A significant majority of 73.3% developers supported enabling CDI, only 13.8% opposed. Comments such as these two reflect a strong general support for CDI as well as a desire for better Java EE alignment with CDI: "CDI makes Java EE quite valuable!" "Would prefer to unify EJB, CDI and JSF lifecycles" There is, however, a palpable concern around the performance impact of enabling CDI by default as exemplified by this comment: "Java EE projects in most cases use CDI, hence it is sensible to enable CDI by default when creating a Java EE application. However, there are several issues if CDI is enabled by default: scanning can be slow - not all libs use CDI (hence, scanning is not needed)" Another significant concern appears to be around backwards compatibility and conflict with other JSR 330 implementations like Spring: "I am leaning towards yes, however can easily imagine situations where errors would be caused by automatically activating CDI, especially in cases of backward compatibility where another DI engine (such as Spring and the like) happens to use the same mechanics to inject dependencies and in that case there would be an overlap in injections and probably an uncertain outcome" Some commenters such as this one attempt to suggest solutions to these potential issues: "If you have Spring in use and use javax.inject.Inject then you might get some unexpected behavior that could be equally confusing. I guess there will be a way to switch CDI off. I'm tempted to say yes but am cautious for this reason" Consistent Usage of @Inject The third question was around using CDI/JSR 330 @Inject consistently vs. allowing JSRs to create their own injection annotations. A slight majority of 53.3% developers supported using @Inject consistently across JSRs. 28.8% said using custom injection annotations is OK, while 18.0% were not sure. The vast majority of commenters were strongly supportive of CDI and general Java EE alignment with CDI as illistrated by these comments: "Dependency Injection should be standard from now on in EE. It should use CDI as that is the DI mechanism in EE and is quite powerful. Having a new JSR specific DI mechanism to deal with just means more reflection, more proxies. JSRs should also be constructed to allow some of their objects Injectable. @Inject @TransactionalCache or @Inject @JMXBean etc...they should define the annotations and stereotypes to make their code less procedural. Dog food it. If there is a shortcoming in CDI for a JSR fix it and we will all be grateful" "We're trying to make this a comprehensive platform, right? Injection should be a fundamental part of the platform; everything else should build on the same common infrastructure. Each-having-their-own is just a recipe for chaos and having to learn the same thing 10 different ways" Expanding the Use of @Stereotype The fourth question was about expanding CDI @Stereotype to cover annotations across Java EE beyond just CDI. A significant majority of 62.3% developers supported expanding the use of @Stereotype, only 13.3% opposed. A majority of commenters supported the idea as well as the theme of general CDI/Java EE alignment as expressed in these examples: "Just like defining new types for (compositions of) existing classes, stereotypes can help make software development easier" "This is especially important if many EJB services are decoupled from the EJB component model and can be applied via individual annotations to Java EE components. @Stateless is a nicely compact annotation. Code will not improve if that will have to be applied in the future as @Transactional, @Pooled, @Secured, @Singlethreaded, @...." Some, however, expressed concerns around increased complexity such as this commenter: "Could be very convenient, but I'm afraid if it wouldn't make some important class annotations less visible" Expanding Interceptor Use The final set of questions was about expanding interceptors further across Java EE... A very solid 96.3% of developers wanted to expand interceptor use to all Java EE components. 35.7% even wanted to expand interceptors to other Java EE managed classes. Most developers (54.9%) were not sure if there is any place that injection is supported that should not support interceptors. 32.8% thought any place that supports injection should also support interceptors. Only 12.2% were certain that there are places where injection should be supported but not interceptors. The comments reflected the diversity of opinions, generally supportive of interceptors: "I think interceptors are as fundamental as injection and should be available anywhere in the platform" "The whole usage of interceptors still needs to take hold in Java programming, but it is a powerful technology that needs some time in the Sun. Basically it should become part of Java SE, maybe the next step after lambas?" A distinct chain of thought separated interceptors from filters and listeners: "I think that the Servlet API already provides a rich set of possibilities to hook yourself into different Servlet container events. I don't find a need to 'pollute' the Servlet model with the Interceptors API"

    Read the article

  • Entity Framework and multi-tenancy database design

    - by Junto
    I am looking at multi-tenancy database schema design for an SaaS concept. It will be ASP.NET MVC - EF, but that isn't so important. Below you can see an example database schema (the Tenant being the Company). The CompanyId is replicated throughout the schema and the primary key has been placed on both the natural key, plus the tenant Id. Plugging this schema into the Entity Framework gives the following errors when I add the tables into the Entity Model file (Model1.edmx): The relationship 'FK_Order_Customer' uses the set of foreign keys '{CustomerId, CompanyId}' that are partially contained in the set of primary keys '{OrderId, CompanyId}' of the table 'Order'. The set of foreign keys must be fully contained in the set of primary keys, or fully not contained in the set of primary keys to be mapped to a model. The relationship 'FK_OrderLine_Customer' uses the set of foreign keys '{CustomerId, CompanyId}' that are partially contained in the set of primary keys '{OrderLineId, CompanyId}' of the table 'OrderLine'. The set of foreign keys must be fully contained in the set of primary keys, or fully not contained in the set of primary keys to be mapped to a model. The relationship 'FK_OrderLine_Order' uses the set of foreign keys '{OrderId, CompanyId}' that are partially contained in the set of primary keys '{OrderLineId, CompanyId}' of the table 'OrderLine'. The set of foreign keys must be fully contained in the set of primary keys, or fully not contained in the set of primary keys to be mapped to a model. The relationship 'FK_Order_Customer' uses the set of foreign keys '{CustomerId, CompanyId}' that are partially contained in the set of primary keys '{OrderId, CompanyId}' of the table 'Order'. The set of foreign keys must be fully contained in the set of primary keys, or fully not contained in the set of primary keys to be mapped to a model. The relationship 'FK_OrderLine_Customer' uses the set of foreign keys '{CustomerId, CompanyId}' that are partially contained in the set of primary keys '{OrderLineId, CompanyId}' of the table 'OrderLine'. The set of foreign keys must be fully contained in the set of primary keys, or fully not contained in the set of primary keys to be mapped to a model. The relationship 'FK_OrderLine_Order' uses the set of foreign keys '{OrderId, CompanyId}' that are partially contained in the set of primary keys '{OrderLineId, CompanyId}' of the table 'OrderLine'. The set of foreign keys must be fully contained in the set of primary keys, or fully not contained in the set of primary keys to be mapped to a model. The relationship 'FK_OrderLine_Product' uses the set of foreign keys '{ProductId, CompanyId}' that are partially contained in the set of primary keys '{OrderLineId, CompanyId}' of the table 'OrderLine'. The set of foreign keys must be fully contained in the set of primary keys, or fully not contained in the set of primary keys to be mapped to a model. The question is in two parts: Is my database design incorrect? Should I refrain from these compound primary keys? I'm questioning my sanity regarding the fundamental schema design (frazzled brain syndrome). Please feel free to suggest the 'idealized' schema. Alternatively, if the database design is correct, then is EF unable to match the keys because it perceives these foreign keys as a potential mis-configured 1:1 relationships (incorrectly)? In which case, is this an EF bug and how can I work around it?

    Read the article

  • jQuery Validate - require at least one field in a group to be filled

    - by Nathan Long
    I'm using the excellent jQuery Validate Plugin to validate some forms. On one form, I need to ensure that the user fills in at least one of a group of fields. I think I've got a pretty good solution, and wanted to share it. Please suggest any improvements you can think of. Finding no built-in way to do this, I searched and found Rebecca Murphey's custom validation method, which was very helpful. I improved this in three ways: To let you pass in a selector for the group of fields To let you specify how many of that group must be filled for validation to pass To show all inputs in the group as passing validation as soon as one of them passes validation. So you can say "at least X inputs that match selector Y must be filled." The end result is a rule like this: partnumber: { require_from_group: [2,".productinfo"] } //The partnumber input will validate if //at least 2 `.productinfo` inputs are filled For best results, put this rule AFTER any formatting rules for that field (like "must contain only numbers", etc). This way, if the user gets an error from this rule and starts filling out one of the fields, they will get immediate feedback about the formatting required without having to fill another field first. Item #3 assumes that you're adding a class of .checked to your error messages upon successful validation. You can do this as follows, as demonstrated here. success: function(label) { label.html(" ").addClass("checked"); } As in the demo linked above, I use CSS to give each span.error an X image as its background, unless it has the class .checked, in which case it gets a check mark image. Here's my code so far: jQuery.validator.addMethod("require_from_group", function(value, element, options) { // From the options array, find out what selector matches // our group of inputs and how many of them should be filled. numberRequired = options[0]; selector = options[1]; var commonParent = $(element).parents('form'); var numberFilled = 0; commonParent.find(selector).each(function(){ // Look through fields matching our selector and total up // how many of them have been filled if ($(this).val()) { numberFilled++; } }); if (numberFilled >= numberRequired) { // This part is a bit of a hack - we make these // fields look like they've passed validation by // hiding their error messages, etc. Strictly speaking, // they haven't been re-validated, though, so it's possible // that we're hiding another validation problem. But there's // no way (that I know of) to trigger actual re-validation, // and in any case, any other errors will pop back up when // the user tries to submit the form. // If anyone knows a way to re-validate, please comment. // // For imputs matching our selector, remove error class // from their text. commonParent.find(selector).removeClass('error'); // Also look for inserted error messages and mark them // with class 'checked' var remainingErrors = commonParent.find(selector) .next('label.error').not('.checked'); remainingErrors.text("").addClass('checked'); // Tell the Validate plugin that this test passed return true; } // The {0} in the next line is the 0th item in the options array }, jQuery.format("Please fill out at least {0} of these fields.")); Questions? Comments?

    Read the article

  • Access, ADO & 64-bit

    - by JTeagle
    We have a large codebase that uses ADO under 32-bit, and we need to convert the code to 64-bit. We were using the Jet provider, but I know this is not supported under x64. We're importing definitions from msado15.dll. As of a while ago a 64-bit version of this DLL became available, but we are unable to get it to work. I have written a test program as follows (MFC, using the #imported DLL): map<CString, CString> mapResults ; _ConnectionPtr pConn = NULL ; CString strConn = _T("Provider=Microsoft.ACE.OLEDB.14.0;") _T("Data Source=c:\\program files\\our_company\\our_database.mdb;"); // (Above string only split for readability here.) CString strSQL = _T("SELECT * FROM [our_table] ORDER BY [our_field_1];"); try { pConn.CreateInstance(__uuidof(Connection) ); pConn->Open(_bstr_t(strConn), _bstr_t(_T("") ), _bstr_t(_T("") ), -1); _CommandPtr pCommand = NULL; pCommand.CreateInstance(__uuidof(Command) ); pCommand->CommandType = adCmdText ; pCommand->ActiveConnection = pConn ; pCommand->CommandText = _bstr_t(strSQL); _RecordsetPtr pRS = NULL ; pRS.CreateInstance(__uuidof(Recordset) ); pRS->CursorLocation = adUseClient ; pRS = pCommand->Execute(NULL, NULL, adCmdText); while (pRS->adoEOF != VARIANT_TRUE) { CString strField = (LPCTSTR)(_bstr_t)pRS->Fields->GetItem( (_bstr_t)_T("our_field_1") )->Value ; CString strValue = (LPCTSTR)(_bstr_t)pRS->Fields->GetItem( (_bstr_t)_T("our_field_2") )->Value ; mapResults[strField] = strValue ; pRS->MoveNext(); } } catch(_com_error &e) { CString strError ; strError.Format(_T("Error %08x: %s"),(int)e.Error(), e.ErrorMessage() ); mapResults[_T("COM error") ] = strError ; } Basically, the code will list the table if it succeeds, or list the COM error obtained if it fails. Obviously, we tested the code under 32 bit and got the desired results. On the 64-bit machine, the code explicitly imports from the known 64-bit version of msado15.dll (v6.1.7600.nnn). The machine has had the Office Data Providers (AccessDatabaseEngine_x64.exe) applied to get the new ACE drivers (ACEODBC.DLL, v14.nnn.nnn.nnn). If I look at Data Source under Administrator Tools (I know ODBC isn't the same as ADO, it was just to confirm the DLL was installed correctly), it shows the expected DLL. I can even confirm, using Process Explorer, that the version of msado15.dll it loads at run time (thus confirming that COM is finding the ADO dll) is the 64-bit version. I believe we have MDAC 2.8 installed (we have msado28.tlb in the same place as msado15.dll, but that might have been installed by AccessDatabaseEngine_x64.exe). The test machine is Windows 7 Ultimate, 64-bit. The test code was recompiled on that machine using VS2008 for x64 in full Release and run externally. And yet, we still get COM error 0x800a0e7a (Provider not found). Is there anything any one can suggest as to why this isn't working, or what further tests / checks I can perform to verify that I have all the right stuff on the machine (and thus, that it should work)? I know that ODBC will work under x64 (tried the test program using that) but rewriting our code base for ODBC would be undesirable!

    Read the article

< Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >