Search Results

Search found 1906 results on 77 pages for 'confirm'.

Page 23/77 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

  • Hyper-V Boot failure on VHD made with Acronis?

    - by gary
    hoping someone can advise on my problem, I am running Hyper-V core and trying to create my first VM for testing purposes. Using Acronis True Image echo server with UR I converted a Seerver 2000 tib to VHD. I then copied this across to the Hyper-V local drive and created a new VM pointing the hard drive to the vhd image. When I boot this up all I get is "Boot failure. Reboot and Select proper Boot device or Insert Boot media in selected Boot device". The original server had SCSI disks, the Hyper-V server doesn't, but I have ensured that it boots from an IDE disk and that it is in fact booting from that not the CD. I can only imagine this is caused by the SCSI disks on VHD but cannot for the life of me work out how to fix, I have several of these I need to do so starting to worry now! I can confirm that when I did this from tib to vmdk it worked first time using VMware on a laptop. Any help very much appreciated. Gary

    Read the article

  • Dolby Digital Live (DDL) on Asus Rampage II Gene (Creative X-Fi Extreme)

    - by kevyn
    Hi there, I have an Asus Rampage II Gene motherboard which has X-Fi extreme built in. I can get it to work with Windows 7 ok using the Creative drivers, however when I try and install the DDL/DTS add on pack from Creative I get the error message: "There are no supported audio device available. You need to close the application. Click OK to close the application now" I don't understand it because I have the Creative software installed ok and supporting the sound without any problems. In Device manager the audio device comes up as 'High definition audio device' and uses driver: 6.1.7600.16385 from Microsoft. I tried using the Creative drivers which show up as 'soundmax HD audio' however these do not allow any of the Creative products to run properly. Please can anyone offer any help? Or even just confirm that DDL can work with my onboard sound? Windows 7 Ultimate 64 bit 6GB DDR3 XFX GS8800 384mb Asus Rampage II Gene Intel i7 920 (2.66)

    Read the article

  • CheckPoint SecuRemote / SecureClient on Vista 64

    - by cliff.meyers
    According to this page, CheckPoint's SecuRemote client is not supported on Vista 64: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit%5FdoGoviewsolutiondetails=&solutionid=sk36681 Unfortunately in working with the systems team they will not confirm if the other two clients (SSL Network Extender or Endpoint Connect) are supported by their environment. Does anyone know if it would be possible to do the following? Install VMware Workstation on my Vista 64 system (host) install a Vista 32-bit OS in a virtual machine (guest) Install SecuRemote VPN client within the guest (Vista 32) Get my Vista 64 machine (host) to use the VPN connection from the guest Any other ideas are more than welcome.

    Read the article

  • What CPU hardware performance counter tool do you guys use?

    - by Hao Shen
    I just want to know the popular tool that I can use. Originally, I used Perfmon2. However, recently, I installed the lastest Ubuntu 12 on my Ivy Bridge i7 machine. Then there is some compilation error for the Pfmon. :< From here http://comments.gmane.org/gmane.comp.linux.perfmon2.devel/3255 , it seems that the Perfmon2 will not work after the kernel 2.6.30. So it suggests to use perf tool. I just want to confirm is there any popular application level performance counter monitor tool which can be used for the later kernel version?

    Read the article

  • Glibc importance of error ...

    - by Oz123
    Hi Everyone, I am following LFS 6.7, and I reached the point where I compile glibc-2.12.1 . I mounted the LFS partition with the atime option: here is a confirm on that I think: /dev/sdb1 on /mnt /lfs type ext4 (rw) I get the following errors on making the test, and I have no clue if I should try to resolve them, or just ignore them and go on ... rpc/types.h sunrpc/rpc/svc_auth.h sunrpc/rpcsvc/bootparam.h sysvipc/sys/ipc.h \ sysvipc/sys/msg.h sysvipc/sys/sem.h sysvipc/sys/shm.h termios/termios.h \ termios/sys/termios.h termios/sys/ttychars.h time/time.h time/sys/time.h \ time/sys/timeb.h wcsmbs/wchar.h wctype/wctype.h > \ /sources/glibc-build/begin-end-check.out make[1]: Target `check' not remade because of errors. make[1]: Leaving directory `/sources/glibc-2.12.1' make: *** [check] Error 2 root:/sources/glibc-build# grep Error glibc-check-log make[2]: *** [/sources/glibc-build/math/test-float.out] Error 1 make[2]: *** [/sources/glibc-build/math/test-ifloat.out] Error 1 make[1]: *** [math/tests] Error 2 make[2]: [/sources/glibc-build/posix/annexc.out] Error 1 (ignored) make: *** [check] Error 2 thanks in advance, Oz

    Read the article

  • Not able to run discovery in XenApp 6.5

    - by BDAA
    I am installing a fresh Citrix farm. I installed XenApp 6.5 and configured while configuring the XenApp, added domain\ctxadmin user as the farm administrator. Now when i log into Administrator account into the XenApp server and run discovery it says This user account is not an administrator of this farm, or there was a problem contacting the data store. Check that the data store server for the Citrix XenApp farm is online, and verify that your account is configured and enabled as an administrator on the farm Then I tried to RDP into the XenApp server as ctxadmin user and now I get an error "The Desktop you are trying to open is currently unavailable. Contact you system administrator to confirm the correct settings are in place for your client connection" I believe starting from XenApp version 6.x, once XenApp is installed, then a Citrix Policy needs to be changed as given in http://support.citrix.com/article/CTX124745 But for changing the Citrix policy I need to log into AppCenter which I am not able to do so as I am not able to run discovery as given above. So I am caught up in an end-less loop. Any help would be greatly appreciated

    Read the article

  • Cant get XAMPP Server to run?

    - by CitadelCSCadet
    I recently installed XAMPP server with PHP, MySQL, and Apache, and I had a friend help me load and configure it and it worked fine. I was able to play around with it, and load anything I wanted and I was able to confirm that it was working. When I went back to use it today, and I tried to run it Apache wont start up now. I imagine I either need to stop another service or there is something not allowing me to start up XAMPP, because even when I try to run the XAMPP_START script from the command line, it wont start.

    Read the article

  • Big square ads appear in lower right corner of both IE and Chrome

    - by BrianK
    In both IE and Chrome, large ads appear in the lower right corner of the browser window. Sometime they look reputable like for Microsoft, but sometimes they are big flashing boxes that say "You have won". Right now I am looking at "Need to lose 30 lbs?" I ran Microsofot Security Essentials and it didn't find anything. I then ran Windows Defender Offline (boot from CD). WDO found five things lincluding browser hijack that caused the wrong page to appear after clicking a link. It reported that it cleaned successfully, after which I ran a quick scan to confirm. After rebooting I still see the ads. Do I still have an infection? Any other tools to try? What about ComboFix? Thanks Update: Here's a screenshot - on superuser

    Read the article

  • Does the OS X DHCP client support classless static routes (RFC3442)?

    - by cense
    Simply put: does Mac OS X support RFC3442? RFC3442 implements DHCP codes (121 and 249) to provide classless static routes to DHCP clients. I can only seem to find rather old information circa 2005-2008 which implies that OS X does not support RFC3442. Any chance this has changed recently and I'm just doing something wrong while setting it up? My anecdotal testing seems to confirm that OS X does not support RFC3442 but I'm looking for confirmation. If OS X still doesn't support RFC3442, what is an alternative method of pushing static routes to OS X clients?

    Read the article

  • Filezilla FTP Server Ports - Active Connections

    - by Brian Webster
    I have been obtaining errors like below because I did not specify enough ports for the active FTP connections. Response: 150 Opening data channel for directory list. Response: 425 Can't open data connection.Error: Failed to retrieve directory listing Things seem to work nicely with limited ports, but when I perform actions that cause very rapid short-lived connections, something like 20-30% of the connections drop with the error above. I started with ports 50000-50100. When I opened up to 50000-52000, the errors disappeared. Why did this fix my problem? I would like to understand why adding ports fixed it. I have a suspicion that ports become "locked down" for a few moments surrounding when they are used in a connection. If connections are happening so rapidly, there may be no ports available, thus the above error. Can anybody confirm?

    Read the article

  • Acer Aspire 1360 Recovery CDs

    - by John
    I have replaced a dead hard disk in an out of warranty Acer Apire 1360 laptop. The two recovery CDs I have dont appear to be bootable, they just contain .hdd and .ghs (image?) files. On the original broken hard drive there was a hidden partition which could be invoked by pressing alt+f10 when booting. You would then be prompted for the 2 recovery CDs to perform the restore. Obviously the new hard drive does not contain the hidden Acer recovery partition. This being the case, how do I go about restoring Win XP? The 2 CDs are called Aspire 1360/1520 Serires Recovery CD Disk 1 of 2 and 2 of 2. Am I missing a futher bootable recovery CD? Can anyone confirm how many restore CDs originally came with the laptop.

    Read the article

  • LVM2 vs MDADM performance

    - by archer
    I've used MDADM + LVM2 on many boxes for quite a while. MDADM was serving for both RAID0 and RAID1 arrays, while LVM2 where used for logical volumes on top of MDADM. Recently I've found that LVM2 could be used w/o MDADM (thus minus one layer, as the result - less overhead) for both mirroring and stripping. However, some guys claims that READ PERFORMANCE on LVM2 for mirrored array is not that fast as for LVM2 (linear) on top of MDADM (RAID1) as LVM2 does not read from 2+ devices at a time, but use 2nd and higher devices in case of 1st device failure. MDADM reads from 2 devices at a time (even in mirrored mode). Who could confirm that?

    Read the article

  • Mac OS X Server Open Directory does not push Software Update settings to clients

    - by joxl
    I have an Xserve G5 running Mac OS X Server 10.5.8 configured as an Open Directory master. I have also enabled and configured Software Update service on the machine. The SUS is configured to serve Tiger, Leopard and Snow Leopard clients (see http://discussions.apple.com/message.jspa?messageID=10297359#10297359) The clients bound to the OD are a variety of Mac's running OS X 10.4, 10.5 or 10.6. In Workgroup Manager, I have created 3 machine groups for each client OS. Each group is configured with a custom SUS URL, and the managed client computers are members accordingly (see http://discussions.apple.com/thread.jspa?messageID=10493154#10493154) My problem is that the server pushes the SUS settings to some of the client machines, but not all. When I first configured all this stuff on the server (a few weeks ago) I was closely monitoring a few of the client machines to confirm that they received the custom settings. I noticed that some of the clients (10.4/5/6 alike) seemed to get the settings immediately, others didn't show the new settings until after a reboot. As I said, results are mixed across OS's, but some clients will not "sync" at all. My immediate thought was to unbind/rebind the problematic machines. I did this on several client computers with no success. For example, today I was working on one of the Tiger clients. I noticed it was not pointed at my local SUS, so I checked the OD binding; it was fine. Just to be sure I unbound the machine. Next, I checked WM and confirmed the computer record was gone. I noticed the machine group still had a residual (broken?) member from the unbound client; I manually removed this. Finally, I re-bound the client to OD and re-added the machine to it's correct group in WM. Unfortunately, the client still pings apple's SUS for updates. Just to play it safe I rebooted the client, but to no avail, it will not see my local SUS. To confirm that there is nothing wrong with the server, or the client's connection to it, forcefully pointed the machine at my SUS: sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL "$LOCAL_SUS_URL" and the machine successfully updated off my local server. Great, successful updates, but problem not solved. I've done exhaustive reading on discussions.apple.com (not saying I read everything, I'm just saying I have read a lot) without a good answer. The discouraging thing is that a lot of OD problems I've read about only result in the sysadmin completely reinstalling the server, or OD, or some other similarly heavy-handed operation. At this point, I am not willing to go that route. I still have hope that I can find the reason for this flaky behavior. If anyone can point me in a helpful direction it would be much appreciated. EDIT: Indeed, some files are being pushed to the client: # from client machine: $ sudo find /Library -type f -name com.apple.SoftwareUpdate.plist /Library/Managed Preferences/com.apple.SoftwareUpdate.plist /Library/Managed Preferences/username/com.apple.SoftwareUpdate.plist /Library/Preferences/com.apple.SoftwareUpdate.plist A few weeks ago, prior to my (previously mentioned) modifications, the SUS was still running "stock". Which meant it could not serve SL (10.6) machines. At that time, the Software Update settings were setup in WM under User Groups. This didn't make any sense because some users work on multiple machines with different OS's. Before creating Machine Groups in WM, I deleted all the SU settings from the User Group Preferences. This just makes the whole thing more confusing, because when I see a file here: /Library/Managed Preferences/username/com.apple.SoftwareUpdate.plist I assume it's still remaining from the "old" settings, because I wouldn't think a Machine Setting belongs there. Despite all the com.apple.SoftwareUpdate.plist hanging around under the Managed Preferences, why does the client machine still call home to Apple and not my SUS? # on client machine: $ date Tue Jan 25 17:01:46 EST 2011 $ softwareupdate --list Software Update Tool Copyright 2002-2005 Apple No new software available. switch terminals... # on server: $ tail -n1 /var/log/swupd/swupd_access_log 10.x.x.x - - [25/Jan/2011:15:54:29 -0500] XXXX POST "/cgi-bin/SoftwareUpdateServerStats" 200 13 ... Notice the date of the client softwareupdate and the latest access to the SUS server; the server never heard a peep from that client.

    Read the article

  • Why would the 'show processlist' command speed up normally slow requests to my remote DB? (connected via VPN)

    - by Hakan B.
    I am running a local Django development server that connects to a remote MySQL server via a VPN (IPSec). Request times are awfully slow and I consistently see timeouts. Attempting to diagnose the problem, I logged in to the remote database and ran: show full processlist Immediately, the local server went from idle to working. The page had not yet completely loaded, but progress had been made (debug logs confirm this). When I ran 'show full processlist' several times more in succession, the request completed quickly. I can currently reproduce this - unless I run 'show full processlist' over and over on the remote server, my local request usually times out. Does anyone have any idea why this would happen? I'm running Django 1.3 and OS X 10.7. Note: I realize this may be entirely not be a question with a clear-cut answer and is probably my fault, but it is odd and reproducable, so I hope someone can at least point me the right direction. Thanks in advance.

    Read the article

  • install CA root trust certificate in Cent OS

    - by Shyamin Ayesh
    i install SSL certificate in my web site and now i have some questions about it. my web site is working correctly in google chrome web browser but it's not working in firefox browser. one of my friend is say's me the CA Root Trust certificate is not installed in the server. now i need to know how can i confirm the CA Root Trust is not installed and how to install CA Root Trust certificate in Cent OS 6.4 minimal with Apache. my SSL certificate issued AlphaSSL and it's domain validating wildcard certificate CA - G2. thank you very much for prompt reply !

    Read the article

  • Can snort output an alert for a portscan (sfPortscan) to syslog?

    - by Jamie McNaught
    I've been working on this for too long now. I'm sure the answer should be obvious, but... Snort manual: http://www.snort.org/assets/125/snort_manual-2_8_5_1.pdf lists two logging outputs on pg 39 (pg 40 according to Acrobat Reader) as: "Unified Output" and "Log File Output" which I am guessing the former refers to the "unified" output mode... which makes me think the answer is "No, snort cannot output alerts for detected portscans to syslog." Config file I've been using is: alert tcp any 80 -> any any (msg:"TestTestTest"; content: "testtesttest"; sid:123) preprocessor sfportscan: proto { all } \ memcap { 10000000 } \ scan_type { all } \ sense_level { high } \ logfile { pscan.log } (yes, very basic I know). A simple nmap triggers output to the pscan.log Can anyone confirm this? Or point out how I do this?

    Read the article

  • Motherboard on, but nothing will start

    - by Geeklat
    I'll try and be as clear as possible. Recently I purchased a barebones kit for my first attempt at a full PC assembly. I've gone through and connected all the parts correctly based on numerous examples that confirm everything is connected correctly. The motherboard and the video card are receiving power based on the fact that the motherboard's power LED is on and the video card has some LEDs on. Nothing else in the computer will come on when pressing the power button on the case. No fans, no hard drive, no CPU fan. Not even for a split second. I also receive no beeping noise from the speaker connected to the motherboard. I've also tried swapping the reset and power connectors from the front of the case to no luck.

    Read the article

  • Hybrid Shutdown in Windows 8

    - by Moab
    Referring to this article published September 8, 2011, it gives instructions on how to to do a full (non-hybrid) shutdown in Windows 8 from the command line. We have an option in the UI to revert back to the Windows 7 shutdown/cold boot behavior, or since that’s likely a fairly infrequent thing, you can use the new /full switch on shutdown.exe. From a cmd prompt, run: shutdown /s /full / t 0 to invoke an immediate full shutdown. shutdown /s /full /t 0 I tried this in W8 Enterprise RTM trial, but did not work, so I did a shutdown /? and noticed they have changed the command for a Full shutdown It appears the /s switch now does the full shutdown as explained in the MS article, and the /hybrid switch does the hybrid shutdown for fast startup. Can anyone confirm this change in other RTM versions of Windows 8? Any Microsoft docs on this change are welcome.

    Read the article

  • fills password and enters program automatically

    - by mark
    I am running Windows 7. In Internet Explorer 9, when I visit a webpage and enter a password it is automatically remembered. When I leave the site and return again at another time, the password is filled in automatically. I would like to stop this behavior. I do not not think that it is an auto fill problem. I think it may be related to an addon provided by my OEM and published by Authentic called "Truesuite Website Log On". How can I confirm that Truesuite is the culprit? How can I stop passwords from being filled in automatically.

    Read the article

  • Microsoft Word RTF formatting breaks after pasting in HTML and saving

    - by meder
    I have developed an HTML e-campaign which uses tables and all the ugly stuff required for HTML emails. I'm pasting this via Open File ( I paste the URL ) and it retrieves the resources ( images ) and pastes the layout in MS Word. When I go and save this as an RTF, close Word and reopen the RTF, the images are broken. Anyone have a clue as to how to work around this issue? I can confirm 100% that the image resource is VALID, it's through http and NOT https. I've tried various advanced options relating to tables/formatting and all to no avail.

    Read the article

  • Fastest light-weight image viewer over forwarded x11 session (linux)

    - by Matthew
    I have a slow network connection over which I'm forwarding x11 over ssh. I want to view images on the remote host (Ubuntu) quickly and efficiently. I'm looking for an image viewer that will take into account the image viewer window's resolution and downsize the image before sending it over the network, instead of sending the full size image. The images I want to view will be around 5MB and I only need to be able to browse through tiny thumbnails of the images to identify the image I'm looking for. It is not necessary to be able to see more than one image at a time. Highest speed over slow network connection is the priority. Thanks! Matthew EDIT: It's possible that the way x11 forwarding works, only the image at the display resolution will be transferred anyway. If that's true, please confirm and the question still stands for which image viewer will be the fastest over a slow connection

    Read the article

  • How to set the preffered network interface in linx

    - by Mike Cooper
    I have my network set up like this. http://docs.google.com/Doc?docid=0AZ1YxuLE4djaZGhqN2s1NmRfMjhjNjc0Ym1meg&hl=en In words: I have a machine (Calcium, running Arch Linux) that has two network interfaces. eth0 is hoooked up to a router, and is gigabit. Eth1 is hooked up directly to the university network over 10Megabit. The router's uplink is hooked up to the university network as well, and it is also 10Megabit. Currently (I believe) all traffic on Calcium is going through eth0, through the router, regardless of whether it is internal or external. (How can I confirm this?) Ideally, traffic that is destined for the internal network (192.168.10.0/24) would travel over eth0 to the router, and wherever it is going. ALL other traffic should go over eth1. I suspect that this behavior could be acheived with IP tables? I don't really know where to start looking to learn that though, so any links would be appreciated.

    Read the article

  • IIS seems to send email twice

    - by David Brunelle
    Hi, we have a request page in our website that send email to confirm the request. It seem that whenever this page is accessed, some (not all of them) are sent more than once at different time, sometime hours apart. The code (which is an old ASP page) looks fine as it sends only once to the recipient. So I doubt it's a programming related problem. When looking at the Exchange server, the tech told me that he seems to be receiving the request twice at different time, so the problem comes from what's between the code and Exchange. My hypothesis is that IIS seem to 'remember' the page and rerun it for some reason. Any hint on where to start? We have IIS 6 (in french if it makes any difference) with Exchange 2007. IIS is running on a Windows Server 2003 machine (virtual machine I believe) in a DMZ. I don't know about Exchange. Thank you.

    Read the article

  • How do i use storage spaces?

    - by Lucas
    I am planning on building a new windows 2012 server for a client and I have no experience in doing so. I have built many linux servers for them and setting up software raid during the install is a trivial matter. I have been unable to confirm that the windows 2012 install process has an analogous process for setting up Storage Spaces during the install. Can Storage Spaces be used as an installation target (configured during setup?) Is it capable of mirror+stripe (RAID10)? We have not ordered the hardware yet, so I'm looking for clarification.

    Read the article

  • `which python` points to the python I want, but `python` runs the wrong version

    - by tramdas
    I want to use python24 provided by ports, so I've installed it, and python_select -s shows that the version I want is indeed selected. Running which python gives /opt/local/bin/python, and running /opt/local/bin/python gives me the version I want. However when I run python from the shell, I get the /usr/bin/python version instead. I don't have a python alias. Here's the situation in a nutshell: I believe the path is set up sensibly, and which python seems to confirm this. alias only returns 1 entry, which is something unrelated to this. Nevertheless, running python from the bash shell gives me the wrong python! I'm kind of stumped! What am I overlooking?

    Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >