Search Results

Search found 1209 results on 49 pages for 'cx freeze'.

Page 23/49 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

  • Freezes if desktop effects is used.

    - by munir
    I have found that using desktop effects in Ubuntu versions later than 8.10 causes the desktop to freeze after a few seconds on my PC. the command lspci -nn gave the following 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) and with lspci -k I have 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) Kernel driver in use: i915 Kernel modules: i915 The intel graphics cards seems to have some performence issues with xorg driver. However I have not noticed any freeze in Ubuntu 8.10. There are some workarounds at https://wiki.ubuntu.com/X/Bugs/Lucidi8xxFreezes to make them work. But I can't find out what workaround should I do with my graphics controller. I have tried workaround F but it did not help. can anyone help me find a workaround for my graphics card? and is it actually possible to use desktop effect in this graphics card ?

    Read the article

  • Yet another GlassFish 3.1.1 promoted build

    - by alexismp
    Promoted build #9 for GlassFish 3.1.1 is available from the usual location. This is the "soft code freeze" build with only the "hard code freeze" build left before the release candidate. So if you have bugs you'd like to see fixed, voice your opinion *now*. As a quick reminder, GlassFish offers Web Profile or Full Platform distributions in ZIP or installer flavors (some more details in this blog post from last year but still relevant). If you've installed previous promoted builds or simply have the "dev" repository defined, then the Update Center will simply update the existing installed bits. In addition to the earlier update on 3.1.1 it's probably safe to say that this version was carefully designed to be highly compatible with the previous 3.x versions, thus leaving you with little reasons not to upgrade as soon as it comes out this summer.

    Read the article

  • Freezes if desktop effects is used [closed]

    - by munir
    I have found that using desktop effects in Ubuntu versions later than 8.10 causes the desktop to freeze after a few seconds on my PC. the command lspci -nn gave the following 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) and with lspci -k I have 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) Kernel driver in use: i915 Kernel modules: i915 The intel graphics cards seems to have some performence issues with xorg driver. However I have not noticed any freeze in Ubuntu 8.10. There are some workarounds at https://wiki.ubuntu.com/X/Bugs/Lucidi8xxFreezes to make them work. But I can't find out what workaround should I do with my graphics controller. I have tried workaround F but it did not help. can anyone help me find a workaround for my graphics card? and is it actually possible to use desktop effect in this graphics card ?

    Read the article

  • What's your release process for your commercial application?

    - by dr. evil
    If you are developing a commercial desktop application, what's your release process? Sample process: Develop it: Patch bugs, add features, etc. Feature Freeze (do not fix, add anything unless it's absolutely required) Test it If everything is OK release it, if it's not fix it, test it, release it I think the most crucial question is what's your approach to "feature freeze test release" cycle? Or do you test it more frequently that you don't need such a cycle and your software is always ready for public release?

    Read the article

  • LINQ into SortedList

    - by Chris Simmons
    I'm a complete LINQ newbie, so I don't know if my LINQ is incorrect for what I need to do or if my expectations of performance are too high. I've got a SortedList of objects, keyed by int; SortedList as opposed to SortedDictionary because I'll be populating the collection with pre-sorted data. My task is to find either the exact key or, if there is no exact key, the one with the next higher value. If the search is too high for the list (e.g. highest key is 100, but search for 105), return null. // The structure of this class is unimportant. Just using // it as an illustration. public class CX { public int KEY; public DateTime DT; } static CX getItem(int i, SortedList<int, CX> list) { var items = (from kv in list where kv.Key >= i select kv.Key); if (items.Any()) { return list[items.Min()]; } return null; } Given a list of 50,000 records, calling getItem 500 times takes about a second and a half. Calling it 50,000 times takes over 2 minutes. This performance seems very poor. Is my LINQ bad? Am I expecting too much? Should I be rolling my own binary search function?

    Read the article

  • Is there a problem with scrollTop in Chrome?

    - by Shaun
    I am setting scrollTop and scrollLeft for a div that I am working with. The code looks like this: div.scrollLeft = content.cx*scalar - parseInt(div.style.width)/2; div.scrollTop = content.cy*scalar - parseInt(div.style.height)/2; This works just fine in FF, but only scrollLeft works in chrome. As you can see, the two use almost identical equations and as it works in FF I am just wondering if this is a problem with Chrome? Update: If I switch the order of the assignments then scrollTop will work and scrollLeft won't. <div id="container" style = "height:600px; width:600px; overflow:auto;" onscroll = "updateCenter()"> <script> var div = document.getElementById('container'); function updateCenter() { svfdim.cx = (div.scrollLeft + parseFloat(div.style.width)/2)/scalar; svfdim.cy = (div.scrollTop + parseFloat(div.style.height)/2)/scalar; } function updateScroll(svfdim, scalar, div) { div.scrollTop = svgdim.cy*scalar - parseFloat(div.style.height)/2; div.scrollLeft = svgdim.cx*scalar - parseFloat(div.style.width)/2; } function resizeSVG(Root) { Root.setAttribute("height", svfdim.height*scalar); Root.setAttribute("width", svfdim.width*scalar); updateScroll(svgdim, scalar, div); } </script>

    Read the article

  • Draw LINE_STRIP with Unity

    - by Boozzz
    For a new project I am thinking about whether to use OpenGL or Unity3d. I have a bit of experience with OpenGL, but I am completely new to Unity. I already read through the Unity documentation and tutorials on the Unity Website. However, I could not find a way to draw a simple Line-Strip with Unity. In the following example (C#, OpenGL/SharpGL) I draw a round trajectory from a predifined point to an obstacle, which can be imagined as a divided circle with midpoint [cx,cy] and radius r. The position (x-y coordinates) of the obstacle is given by obst_x and obst_y. Question 1: How could I do the same with Unity? Question 2: In my new project, I will have to draw quite a lot of such geometric primitives. Does it make any sense to use Unity for those things? void drawCircle(float cx, float cy, float r, const float obst_x, const float obst_y) { float theta = 0.0f, pos_x, pos_y, dist; const float delta = 0.1; glBegin(GL_LINE_STRIP); while (theta < 180) { theta += delta; //get the current angle float x = r * cosf(theta); //calculate the x component float y = r * sinf(theta); //calculate the y component pos_x = x + cx; //calculate current x position pos_y = y + cy; //calculate current y position //calculate distance from current vertex to obstacle dist = sqrt(pow(pos_x - obst_x) + pow(pos_y - obst_y)); //check if current vertex intersects with obstacle if dist <= 0 { break; //stop drawing circle } else { glVertex2f(pos_x, pos_y); //draw vertex } } glEnd(); }

    Read the article

  • Now Live: New Java Enterprise Edition 6 Certification Exams

    - by Paul Sorensen
    The new Java Enterprise Edition 6 (EE6) exams are being released into production, effective today (February 21, 2011). If you participated in the beta exams, we appreciate your patience in awaiting your beta scores (there were some initial technical difficulties with these exams that delayed beta review and scoring). While most of the production exams are currently available and most of the beta scores have been mailed, they are not 100% completed. We expect all production exams to be available and all scores to be mailed tentatively by March 31, 2010. We appreciate your patience in receiving your beta scores as we work through some issues that have delayed the release of beta scores for two of these exams. Beta candidates can expect to receive their printed score reports in the mail from Prometric. Please allow 5 business days from the 'date mailed' below to receive your score report. If you have not received it within 5 business days, please contact Prometric. EXAM  PRODUCTIONDATE BETA SCOREMAILED Loading...CX-311-093 Java Platform, Enterprise Edition 6 Enterprise JavaBeans Developer Certified Expert ExamJanuary 12, 2011February 4, 2011CX-311-094 Java Platform, Enterprise Edition 6 Java Persistence API Developer Certified Expert ExamFebruary 1, 2011February 11, 2011CX-311-232 Java Platform, Enterprise Edition 6 Web Services Developer Certified Expert ExamFebruary 8, 2011by March 31, 2011tentative*CX-311-085 Java Platform, Enterprise Edition 6 JavaServer Pages and Servlet Developer Certified Expert Examby March 31, 2011tentative*by March 31, 2011tentative* *Dates are subject to change without notice.Register now at prometric.com/oracle.QUICK LINKSHelp with beta exam score reportOracle Certified Professional, Java Platform, Enterprise Edition 6 JavaServer Pages and Servlet DeveloperOracle Certified Professional, Java Platform, Enterprise Edition 6 Enterprise JavaBeans DeveloperOracle Certified Professional, Java Platform, Enterprise Edition 6 Java Persistence API DeveloperOracle Certified Professional, Java Platform, Enterprise Edition 6 Web Services Developer

    Read the article

  • Ubuntu 12.04.2 Dual boot UEFI Windows 8 Preinstalled CX21903W Ultrabook

    - by user180782
    Hi i have a problem trying to install ubuntu. The machine is a CX Ultrabook model CX.21903W Intel I5 with 500GB hard disk, 8 GB ram and 32 GB SSD. From Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported), and according to the steps guide: 1 - We create a partition from Win8 (70 GB) from the own win8 program. 2 - Confirm-SecureBootUEFI=True. 3 - From Win8, shift + Restart and from special menu we selected the UEFI Firmware Setting. 4 - From BIOS Option: ------Option 1) Disable Secure Boot. ------Option 2) Disable UEFI (Not Available) from Option 1: Three ways is available. With Secure Boot enable - We can't even boot ubuntu. A red windows saying Soft unproper signed. With Secure Boot disable - and this config in boot device order: ----1: UEFI: USB ----2: Windows Boot Manger ----3: Others and CSM (Compatibility Support Module): enable - GRUB appears and selecting try Ubuntu then a black windows appears and nothing happens. The same result if install ubuntu is selected. With Secure Boot disable - and this config in boot device order: ----1: USB (No UEFI) ----2: Windows Boot Manger ----3: Others and CSM (Compatibility Support Module): enable - GRUB appears and selecting try Ubuntu, - Ubuntu boots and we can install it even. 5 - Rebooting and just changing the boot order as ----1: Ubuntu [] ----2: Windows Boot Manger ----3: Others then nothings happens. 6 - Booting from LiveUSB again and, as per instructed, making Boot-Repair (A warning windows: Ubuntu is working in legacy mode.). 7 - Saving changes and rebooting, Grub works but selecting Ubuntu, a black windows appears and nothing happens. Selecting Win8, Win8 boots and works. Untill now we can't make the ubuntu installation. Any suggestion will be welcomed. kind regards and thanks in advance.

    Read the article

  • Customer Service Experience, Oracle e Cels insieme per innovare le strategie.

    - by Claudia Caramelli-Oracle
    Si è svolto oggi il workshop Oracle "Customer Service Experience. Strategie per progettare un Servizio eccellente e profittevole." che ha visto il contributo del gruppo di ricerca CELS (Research Group on Industrial Engineering, Logistics and Service Operations) e della sezione ASAP SMF dell’Università degli Studi di Bergamo. Giuditta Pezzotta (PhD - Cels) e Roberto Pinto (PhD - Cels) ci hanno presentato la Service Engineering Methodology (SEEM), innovativa piattaforma metodologica che permette di ottimizzare la creazione di valore sia per il cliente finale sia per l’azienda, partendo dalla progettazione del prodotto e arrivando alla progettazione della soluzione prodotto-servizio, e valutando la bontà del prodotto-servizio ipotizzato attraverso strumenti concettuali e di simulazione dei processi. Armando Janigro, CX Strategy Director EMEA - Oracle ha invece parlato di Modern Customer Service, ovvero di come adattarsi in modo agile e veloce alle mutevoli necessità dei clienti, ipotizzando l’adozione in chiave strategica di nuovi strumenti di differenziazione e di leadership come la Customer Experience (CX) e sfruttando le nuove dinamiche di relazione azienda-singolo consumatore per ottimizzare l’esperienza multicanale e per render più efficiente il Customer Service, creando ulteriore valore. A seguire è stata mostrata da PierLuigi Coli, Principal Sales Consultant - Oracle, una demo sui prodotti Service Cloud offerti da Oracle, a supporto di tutti i concetti raccontati nelle sessioni precedenti. Il workshop è stato un’occasione unica per definire i percorsi da intraprendere per sviluppare efficaci strategie di Customer Experience grazie ad approcci e metodologie innovative alla base di uno sviluppo sostenibile del business. Le slide proiettate sono disponibili su richiesta: scrivi a Claudia Caramelli per ogni informazione o chiarimento.

    Read the article

  • Understanding dot notation

    - by Starkers
    Here's my interpretation of dot notation: a = [2,6] b = [1,4] c = [0,8] a . b . c = (2*6)+(1*4)+(0*8) = 12 + 4 + 0 = 16 What is the significance of 16? Apparently it's a scalar. Am I right in thinking that a scalar is the number we times a unit vector by to get a vector that has a scaled up magnitude but the same direction as the unit vector? So again, what is the relevance of 16? When is it used? It's not the magnitude of all the vectors added up. The magnitude of all of them is calculated as follows: sqrt( ax * ax + ay * ay ) + sqrt( bx * bx + by * by ) + sqrt( cx * cx + cy * cy) sqrt( 2 * 2 + 6 * 6 ) + sqrt( 1 * 1 + 4 * 4 ) + sqrt( 0 * 0 + 8 * 8) sqrt( 4 + 36 ) + sqrt( 1 + 16 ) + sqrt( 0 + 64) sqrt( 40 ) + sqrt( 17 ) + sqrt( 64) 6.3 + 4.1 + 8 10.4 + 8 18.4 So I don't really get this diagram: Attempting with sensible numbers: a = [1,0] b = [4,3] a . b = (1*0) + (4*3) = 0 + 12 = 12 So what exactly is a . b describing here? The magnitude of that vector? Because that isn't right: the 'a.b' vector = [4,0] sqrt( x*x + y*y ) sqrt( 4*4 + 0*0 ) sqrt( 16 + 0 ) 4 So what is 12 describing?

    Read the article

  • Oracle???????????47??????????

    - by user758881
    Oracle???2014?5?31???,??????,40?Oracle???????47????Oracle??? Oracle Accelerate ????? ?Oracle 2014?????????47???????????????????????Oracle????,??Oracle Financials Cloud, Oracle Sales Cloud ? Oracle Service Cloud –???? Oracle CX Cloud, ?? Oracle Human Capital Management (HCM) Cloud. ???Oracle Accelerate??????????????????? ???????????????????, ??, ???, ??, ??, ???????????????????,????????????????? ???????????????????????????????,Oracle??????????????????????Oracle???Oracle????????????? l   ??????????,???????????????——Oracle ???? eVerge Group, Certus Solutions, Presence of IT, CSolutor, Grant Thornton, ? KBACE Technologies ?????Oracle HCM Cloud ?Oracle Accelerate ????????????????????????,???????????????????,???????????????? l   ???????????????????????????——DAZ, Inc., Frontera Consulting?Inoapps ?????Oracle Financials Cloud????????????????????????? l   ?????????????????????——Capricorn Ventis, Enigen, Fellow Consulting, Solveso Interactive, CSolutor, Birchman Consulting,BPI On Demand, Business Technology Services (BizTech)? eVerge Group?????Oracle CX Cloud?????????????????????????? ??,Oracle???????????????????????????????????: l   ?????? BPI On Demand ??????????????????????Oracle Sales Cloud????? ?????????? ·          “??????????????????? ???Oracle Financials Cloud?Oracle Accelerate???? ?????????????????????????????????????????????????”–Phil Wilson, Business Development & Alliances,Inoapps ·          “KBACE?Oracle Accelerate???????KBACE ????????????????????????????????????????KBACE? Oracle Accelerate????,??Oracle HCM???,????????????????????”–Mike Peterson, President & COO, KBACE Technologies ·          “???????Oracle Financials Cloud,??????????????????????????????????????????????Oracle Accelerate????,????????????????????”—Deborah Arnold, President, DAZ Systems, Inc. ·          “????????????Oracle ERP Cloud????Oracle Accelerate?????????????????” - Sean Moore, Principal. C3Biz ·          “????,????Oracle HCM????????????????????????????eVerge Group??Oracle HCM????Oracle Accelerate???????????????????????” - John Peketz, Vice President, Marketing, eVerge Group

    Read the article

  • Explain to me the following VS 2010 Extension Sample code..

    - by ealshabaan
    Coders, I am building a VS 2010 extension and I am experimenting around some of the samples that came with the VS 2010 SDK. One of the sample projects is called TextAdornment. In that project there is a weirdo class that looks like the following: [Export(typeof(IWpfTextViewCreationListener))] [ContentType("text")] [TextViewRole(PredefinedTextViewRoles.Document)] internal sealed class TextAdornment1Factory : IWpfTextViewCreationListener While I was experimenting with this project, I tried to debug the project to see the flow of the program and I noticed that this class gets hit when I first start the debugging. Now my question is the following: what makes this class being the first class to get called when VS starts? In other words, why this class gets active and it runs as of some code instantiate an object of this class type? Here is the only two files in the sample project: TextAdornment1Factory.cs using System.ComponentModel.Composition; using Microsoft.VisualStudio.Text.Editor; using Microsoft.VisualStudio.Utilities; namespace TextAdornment1 { #region Adornment Factory /// /// Establishes an to place the adornment on and exports the /// that instantiates the adornment on the event of a 's creation /// [Export(typeof(IWpfTextViewCreationListener))] [ContentType("text")] [TextViewRole(PredefinedTextViewRoles.Document)] internal sealed class TextAdornment1Factory : IWpfTextViewCreationListener { /// /// Defines the adornment layer for the adornment. This layer is ordered /// after the selection layer in the Z-order /// [Export(typeof(AdornmentLayerDefinition))] [Name("TextAdornment1")] [Order(After = PredefinedAdornmentLayers.Selection, Before = PredefinedAdornmentLayers.Text)] [TextViewRole(PredefinedTextViewRoles.Document)] public AdornmentLayerDefinition editorAdornmentLayer = null; /// <summary> /// Instantiates a TextAdornment1 manager when a textView is created. /// </summary> /// <param name="textView">The <see cref="IWpfTextView"/> upon which the adornment should be placed</param> public void TextViewCreated(IWpfTextView textView) { new TextAdornment1(textView); } } #endregion //Adornment Factory } TextAdornment1.cs using System.Windows; using System.Windows.Controls; using System.Windows.Media; using Microsoft.VisualStudio.Text; using Microsoft.VisualStudio.Text.Editor; using Microsoft.VisualStudio.Text.Formatting; namespace TextAdornment1 { /// ///TextAdornment1 places red boxes behind all the "A"s in the editor window /// public class TextAdornment1 { IAdornmentLayer _layer; IWpfTextView _view; Brush _brush; Pen _pen; ITextView textView; public TextAdornment1(IWpfTextView view) { _view = view; _layer = view.GetAdornmentLayer("TextAdornment1"); textView = view; //Listen to any event that changes the layout (text changes, scrolling, etc) _view.LayoutChanged += OnLayoutChanged; _view.Closed += new System.EventHandler(_view_Closed); //selectedText(); //Create the pen and brush to color the box behind the a's Brush brush = new SolidColorBrush(Color.FromArgb(0x20, 0x00, 0x00, 0xff)); brush.Freeze(); Brush penBrush = new SolidColorBrush(Colors.Red); penBrush.Freeze(); Pen pen = new Pen(penBrush, 0.5); pen.Freeze(); _brush = brush; _pen = pen; } void _view_Closed(object sender, System.EventArgs e) { MessageBox.Show(textView.Selection.IsEmpty.ToString()); } /// <summary> /// On layout change add the adornment to any reformatted lines /// </summary> private void OnLayoutChanged(object sender, TextViewLayoutChangedEventArgs e) { foreach (ITextViewLine line in e.NewOrReformattedLines) { this.CreateVisuals(line); } } private void selectedText() { } /// <summary> /// Within the given line add the scarlet box behind the a /// </summary> private void CreateVisuals(ITextViewLine line) { //grab a reference to the lines in the current TextView IWpfTextViewLineCollection textViewLines = _view.TextViewLines; int start = line.Start; int end = line.End; //Loop through each character, and place a box around any a for (int i = start; (i < end); ++i) { if (_view.TextSnapshot[i] == 'a') { SnapshotSpan span = new SnapshotSpan(_view.TextSnapshot, Span.FromBounds(i, i + 1)); Geometry g = textViewLines.GetMarkerGeometry(span); if (g != null) { GeometryDrawing drawing = new GeometryDrawing(_brush, _pen, g); drawing.Freeze(); DrawingImage drawingImage = new DrawingImage(drawing); drawingImage.Freeze(); Image image = new Image(); image.Source = drawingImage; //Align the image with the top of the bounds of the text geometry Canvas.SetLeft(image, g.Bounds.Left); Canvas.SetTop(image, g.Bounds.Top); _layer.AddAdornment(AdornmentPositioningBehavior.TextRelative, span, null, image, null); } } } } } }

    Read the article

  • Django-South introspection rule doesn't work.

    - by Ory Band
    I'm using Django 1.2.3 and South 0.7.3. I am trying to convert my app (named core) to use Django-South. I have a custom model/field that I'm using, named ImageWithThumbsField. It's basically just the ol' django.db.models.ImageField with some attributes such as height, weight, etc. While trying to ./manage.py convert_to_auth core I receieve South's freezing errors. I have no idea why, I'm Probably missing something... I am using a simple custom Model: from django.db.models import ImageField class ImageWithThumbsField(ImageField): def __init__(self, verbose_name=None, name=None, width_field=None, height_field=None, sizes=None, **kwargs): self.verbose_name=verbose_name self.name=name self.width_field=width_field self.height_field=height_field self.sizes = sizes super(ImageField, self).__init__(**kwargs) And this is my introspection rule, which I add to the top of my models.py: from south.modelsinspector import add_introspection_rules from lib.thumbs import ImageWithThumbsField add_introspection_rules( [ ( (ImageWithThumbsField, ), [], { "verbose_name": ["verbose_name", {"default": None}], "name": ["name", {"default": None}], "width_field": ["width_field", {"default": None}], "height_field": ["height_field", {"default": None}], "sizes": ["sizes", {"default": None}], }, ), ], ["^core/.fields/.ImageWithThumbsField",]) This is the errors I receieve: ! Cannot freeze field 'core.additionalmaterialphoto.photo' ! (this field has class lib.thumbs.ImageWithThumbsField) ! Cannot freeze field 'core.material.photo' ! (this field has class lib.thumbs.ImageWithThumbsField) ! Cannot freeze field 'core.material.formulaimage' ! (this field has class lib.thumbs.ImageWithThumbsField) ! South cannot introspect some fields; this is probably because they are custom ! fields. If they worked in 0.6 or below, this is because we have removed the ! models parser (it often broke things). ! To fix this, read http://south.aeracode.org/wiki/MyFieldsDontWork Does anybody know why? What am I doing wrong?

    Read the article

  • Handling Trailing Delimiters in HL7 Messages

    - by Thomas Canter
    Applies to: BizTalk Server 2006 with the HL7 1.3 Accelerator Outline of the problem Trailing Delimiters are empty values at the end of an object in a HL7 ER7 formatted message. Examples: Empty Field NTE|P| NTE|P|| Empty component ORC|1|725^ Empty Subcomponent ORC|1|||||27& Empty repeat OBR|1||||||||027~ Trailing delimiters indicate the following object exists and is empty, which is quite different from null, null is an explicit value indicated by a pair of double quotes -> "". The BizTalk HL7 Accelerator by default does not allow trailing delimiters. There are three methods to allow trailing delimiters. NOTE: All Schemas always allow trailing delimiters in the MSH Segment Using party identifiers MSH3.1 – Receive/inbound processing, using this value as a party allows you to configure the system to allow inbound trailing delimiters. MSH5.1 – Send/outbound processing, using this value as a party allows you to configure the system to allow outbound trailing delimiters. Generally, if you allow inbound trailing delimiters, unless you are willing to programmatically remove all trailing delimiters, then you need to configure the send to allow trailing delimiters. Add the appropriate parties to the BizTalk Parties list from these two fields in your message stream. Open the BizTalk HL7 Configuration tool and for each party check the "Allow trailing delimiters (separators)" check box on the Validation tab. Disadvantage – Each MSH3.1 and MSH5.1 value must be represented in the parties list and configured. Advantage – granular control over system behavior for each inbound/outbound system. Using instance properties of a pipeline used in a send port or receive location. Open the BizTalk Server Administration console locate the send port or receive location that contains the BTAHL72XReceivePipeline or BTAHL72XSendPipeline pipeline. Open the properties To the right of the pipeline selected locate the […] ellipses button In the property list, locate the "TrailingDelimiterAllowed" property and set it to True. Advantage – All messages through a particular Send Port or Receive Location will allow trailing delimiters. Disadvantage – Must configure each Send Port or Receive Location. No granular control over which remote parties will send or receive messages with trailing delimiters. Using a custom pipeline that uses a pre-configured BTA HL7 Pipeline component. Use Visual Studio to construct a custom receive and send pipeline using the appropriate assembler or dissasembler. Set the component property to "TrailingDelimitersAllowed" to True Compile and deploy the custom pipeline Use the custom pipeline instead of the standard pipeline for all HL7 message processing Advantage – All messages using the custom pipeline will automatically allow trailing delimiters. Disadvantage – Requires custom coding and development to create and deploy the custom pipeline. No granular control over which remote parties will send or receive messages with trailing delimiters. What does a Trailing Delimiter do to the XML Schema? Allowing trailing delimiters does not have the impact often expected in the actual XML Schema.The Schema reproduces the message with no data loss.Thus, the message when represented in XML must contain the extra fields, in order to reproduce the outbound message.Thus, a trialing delimiter results in an empty XML field.Trailing Delmiters are not stripped from the inbound message. Example:<PID_21>44172</PID_21><PID_21>9257</PID_21> -> the original maximum number of repeats<PID_21></PID_21> -> The empty repeated field Allowing trailing delimiters not remove the trailing delimiters from the message, it simply suppresses the check that will cause the message to fail parse with trailing delimiters. When can you not fix the problem by enabling trailing delimiters Each object in a message must have a location in the target BTAHL7 schema for its content to reside.If you have more objects in the message than are contained at that location, then enabling trailing delimiters will not resolve the problem. The schema must be extended to accommodate the empty message content.Examples: Extra Field NTE|P||||Only 4 fields in NTE Segment, the 4th field exists, but is empty. Extra component PID|1|1523|47^^^^^^^Only 5 components in a CX data type, the 5th component exists, but is empty Extra subcomponent ORC|1|||||27&&Only 2 subcomponents in a CQ data type, the 3rd subcomponent is empty, but exists. Extra Repeat PID|1||||||||||||||||||||4419~5217~Only 2 repeats allowed for the field "Mother's identifier", the repeat is empty, but exists. In each of these cases, you must locate the failing object and extend the type to allow an additional object of that type. FieldAdd a field of ST to the end of the segment with a suitable name in the segments_nnn.xsd Component Create a new Custom CX data type (i.e. CX_XtraComp) in the datatypes_nnn.xsd and add a new component to the custom CX data type. Update the field in the segments_nnn.xsd file to use the custom data type instead of the standard datatype. Subcomponent Create a new Custom CQ data type that accepts an additional TS value at the end of the data type. Create a custom TQ data type that uses the new custom CQ data type as the first subcomponent. Modify the ORC segment to use the new CQ data type at ORC.7 instead of the standard CQ data type. RepeatModify the Field definition for PID.21 in the segments_nnn.xsd to allow more repeats in the field.

    Read the article

  • How do I consistently re-size my game window and elements?

    - by Milo
    In my 2D game, I have a flow layout. Inside the flow layout are tables. I have a slider that lets the user make the tables larger or smaller. This makes the background larger or smaller too. Everything should scale proportionally which means the background should stay at the same position when I make things larger, and it almost does. When the scrollbar is at 0, it does exactly this. As the scrollbar gets further down problems arise. I'll toggle the slider maybe 3 times and on the fourth time, the background jumps a little lower on the Y axis. In order to be efficient, I only start rendering the background near the parent of the flow layout. Here it is: void LobbyTableManager::renderBG( GraphicsContext* g, agui::Rectangle& absRect, agui::Rectangle& childRect ) { int cx, cy, cw, ch; g->getClippingRect(cx,cy,cw,ch); g->setClippingRect(absRect.getX(),absRect.getY(),absRect.getWidth(),absRect.getHeight()); float scale = 0.35f; int w = m_bgSprite->getWidth() * getTableScale() * scale; int h = m_bgSprite->getHeight() * getTableScale() * scale; int numX = ceil(absRect.getWidth() / (float)w) + 2; int numY = ceil(absRect.getHeight() / (float)h) + 2; float offsetX = m_activeTables[0]->getLocation().getX() - w; float offsetY = m_activeTables[0]->getLocation().getY() - h; int startY = childRect.getY(); if(moo) { std::cout << "S=" << startY << ","; } int numAttempts = 0; while(startY + h < absRect.getY() && numAttempts < 1000) { startY += h; if(moo) { std::cout << startY << ","; } numAttempts++; } if(moo) { std::cout << "\n"; moo = false; } g->holdDrawing(); for(int i = 0; i < numX; ++i) { for(int j = 0; j < numY; ++j) { g->drawScaledSprite(m_bgSprite,0,0,m_bgSprite->getWidth(),m_bgSprite->getHeight(), absRect.getX() + (i * w) + (offsetX),absRect.getY() + (j * h) + startY,w,h,0); } } g->unholdDrawing(); g->setClippingRect(cx,cy,cw,ch); } The numeric problem seems to be in the value of startY. I outputted startY figuring out its value: As you can see here, this is me only zooming in, pay attention to the final number before the next s=. You'll notice that, what should happen is, the numbers should be linear, ex: -40, -38, -36, -34, -32, -30, etc. As you'll notice, the start numbers linearly correlate ex: 62k, 64k, 66k, 68k, 70k etc.. but the end result is wrong every third or 4th time. Here is most of the resize code: void LobbyTableManager::setTableScale( float scale ) { scale += 0.3f; scale *= 2.0f; agui::Gui* gotGui = getGui(); float scrollRel = m_vScroll->getRelativeValue(); setScale(scale); rescaleTables(); resizeFlow(); if(gotGui) { gotGui->toggleWidgetLocationChanged(false); } updateScrollBars(); float newVal = scrollRel * m_vScroll->getMaxValue(); if((int)(newVal + 0.5f) > (int)newVal) { newVal++; } m_vScroll->setValue(newVal); static int x = 0; x++; moo = true; //std::cout << m_vScroll->getValue() << std::endl; if(gotGui) { gotGui->toggleWidgetLocationChanged(true); } if(gotGui) { gotGui->_widgetLocationChanged(); } } void LobbyTableManager::valueChanged( agui::VScrollBar* source,int val ) { if(getGui()) { getGui()->toggleWidgetLocationChanged(false); } m_flow->setLocation(0,-val); if(getGui()) { getGui()->toggleWidgetLocationChanged(true); getGui()->_widgetLocationChanged(); } }

    Read the article

  • State of the (Commerce) Union: What the healthcare.gov hiccups teach us about the commerce customer experience

    - by Katrina Gosek
    Guest Post by Brenna Johnson, Oracle Commerce Product A lot has been said about the healthcare.gov debacle in the last week. Regardless of your feelings about the Affordable Care Act, there’s a hidden issue in this story that most of the American people don’t understand: delivering a great commerce customer experience (CX) is hard. It shouldn’t be, but it is. The reality of the government’s issues getting the healthcare site up and running smooth is something we in the online commerce community know too well.  If there’s one thing the botched launch of the site has taught us, it’s that regardless of the size of your budget or the power of an executive with a high-profile project, some of the biggest initiatives with the most attention (and the most at stake) don’t go as planned. It may even give you a moment of solace – we have the same issues! But why?  Organizations engage too many separate vendors with different technologies, running sections or pieces of a site to get live. When things go wrong, it takes time to identify the problem – and who or what is at the center of it. Unfortunately, this is a brittle way of setting up a site, making it susceptible to breaks, bugs, and scaling issues. But, it’s the reality of running a site with legacy technology constraints in today’s demanding, customer-centric market. This approach also means there’s also a lot of cooks in lots of different kitchens. You’ve got development and IT, the business and the marketing team, an external Systems Integrator to bring it all together, a digital agency or consultant, QA, product experts, 3rd party suppliers, and the list goes on. To complicate things, different business units are held responsible for different pieces of the site and managing different technologies. And again – due to legacy organizational structure and processes, this is all accepted as the normal State of the Union. Digital commerce has been commonplace for 15 years. Yet, getting a site live, maintained and performing requires orchestrating a cast of thousands (or at least, dozens), big dollars, and some finger-crossing. But it shouldn’t. The great thing about the advent of mobile commerce and the continued maturity of online commerce is that it’s forced organizations to think from the outside, in. Consumers – whether they’re shopping for shoes or a new healthcare plan – don’t care about what technology issues or processes you have behind the scenes. They just want it to work.  They want their experience to be easy, fast, and tailored to them and their needs – whatever they are. This doesn’t sound like a tall order to the American consumer – especially since they interact with sites that do work smoothly.  But the reality is that it takes scores of people, teams, check-ins, late nights, testing, and some good luck to get sites to run, and even more so at Black Friday (or October 1st) traffic levels.  The last thing on a customer’s mind is making excuses for why they can’t buy a product – just get it to work. So what is the government doing? My guess is working day and night to get the site performing  - and having to throw big money at the problem. In the meantime they’re sending frustrated online users to the call center, or even a location where a trained “navigator” can help them in-person to complete their selection. Sounds a lot like multichannel commerce (where broken communication between siloed touchpoints will only frustrate the consumer more). One thing we’ve learned is that consumers spend their time and money with brands they know and trust. When sites are easy to use and adapt to their needs, they tend to spend more, come back, and even become long-time loyalists. Achieving this may require moving internal mountains, but there’s too much at stake to ignore the sea change in how organizations are thinking about their customer. If the thought of re-thinking your internal teams, technologies, and processes sounds like a headache, think about the pain associated with losing valuable customers – and dollars. Regardless if you’re in B2B or B2C, it’s guaranteed that your competitors are making CX a priority. Those early to the game who have made CX a priority have already begun to outpace their competition. So as you’re planning for 2014, look to the news this week. Make sure the customer experience is a focus at your organization. Expectations are at record highs. Map your customer’s journey, and think from the outside, in. How easy is it for your customers to do business with you? If they interact with many touchpoints across your organization, are the call center, website, mobile environment, or brick and mortar location in sync? Do you have the technology in place to achieve this? It’s time to give the people what they want!

    Read the article

  • Windows XP will only boot if it has booted into safe mode, and then been restarted into normal mode, anybody ever seen this?

    - by Happy Hamster
    I have a workstation with an impressively strange problem. If you boot the computer, it will load up to the "select user account screen" and then freeze completely before I can select a user account. No mouse, keyboard, anything working. However, if you then reboot the computer into safe mode, do NOTHING, and then reboot into regular mode, it loads fine. The next time you reboot the computer, it will freeze a the login screen again. So basically to log in normally I must reboot into safe mode first every time, even though I'm not even doing anything in safe mode (I don't even need to log into a profile). Anybody ever seen anything like this?

    Read the article

  • Ping isn't acting accurate?

    - by Earlz
    I've been trying to diagnose some latency issues with my internet connection. I've been lagging out of online video games and such, which of course could be their server's fault. So, I've been running ping some. It doesn't indicate anything unusual, but it does act a bit strange. I can start it with something like ping internethost -i 0.1 so that it will send a ton of packets, and every 10-20 seconds it will appear to just freeze for 2 or 3 seconds. The packets are still being received in the right order though, and there is no packet loss. The weirdest thing is that after the little freeze up, it will usually just report a ping time that is about 10-30ms higher than the average. How does this happen? Is ping still being accurate? I'm using Arch Linux. The host I'm pinging is my website, which shouldn't be doing any kind of ping slowing or filtering.

    Read the article

  • deploying a Python application from a PHP developer

    - by user1218776
    I'm a little confused on the deployment process for Python. Let's say you create a brand new project with virtualenv source bin/activate pip install a few libraries write a simple hello world app pip freeze the dependencies When I deploy this code into a machine, do I need first make sure the machine is sourced before installing dependencies? I don't mean to sound like a total noob but in the PHP world, I don't have to worry about this because it's already part of the project. All the dependencies are registered with the autoloader in place. The steps would be: rsync the files (or any other method) source bin/activate pip install the dependencies from the pip freeze output file It feels awkward, or just wrong and very error prone. What are the correct steps to make? I've searched around but it seems many tutorials/articles make an assumption that anyone reading the article has past python experience (imo).

    Read the article

  • Packard Bell EasyNote MZ35 freezes when AC unplugged and wireless on

    - by Sense Hofstede
    I would like to ask for some help debugging an irritating problem I'm having with my Packard Bell EasyNote MZ35 and Ubuntu 10.10. Always when the laptop is connected to a wireless network and the AC power lead is unplugged—so it's running on battery power—the system freezes. The screen turns black and shows the error GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0), although this error is completely unrelated to the actual problem. Previous searches on the internet indicate that this error is unrelated to the bug I'm experiencing. It is suggested that Ubuntu tries to hibernate or suspend and that you're seeing the black screen running 'behind' the X server. That would explain the fact that curiously you still see—but cannot move—the mouse cursor. I've already set all the values of the GConf keys in /apps/gnome-power-manager/actions/ to 'nothing', disabled all power management actions I could find, but it didn't solve the problem. It is important to note that the freeze doesn't happen immediately after you unplug the AC power lead. The icon in the notification area may have changed already, but the freeze only occurs when the Notify OSD bubble appears that tells you how many time is left with your battery. Does anyone here have a clue about this problem? A workaround or the cause? If anyone could help me with disabling possible suspend/hibernate behaviour that might be related to this issue, that would be appreciated too. This issue has been reported as bug #666852.

    Read the article

  • Why does 301 redirect work for http but not for https?

    - by Tom G
    Through my domain registrar I have set up a domain, essayme.co.uk, to automatically forward to https://google.com. If I go to http://essayme.co.uk it works as expected and redirects me to https://google.com. $curl -i http://essayme.co.uk HTTP/1.1 301 Moved Permanently Cache-Control: max-age=900 Content-Type: text/html Location: https://google.com Server: Microsoft-IIS/7.5 X-AspNet-Version: 4.0.30319 X-Powered-By: ASP.NET Date: Sat, 07 Jun 2014 11:14:16 GMT Content-Length: 0 Age: 0 Connection: keep-alive However, if I go to https://essayme.co.uk it just freezes and times out. $curl -i https://essayme.co.uk curl: (7) Failed connect to essayme.co.uk:443; Operation timed out What is happening in the second case? (and, if possible, how can I get the redirect to work for https?) Problem background/clarification: I don't have an SSL certificate for the essayme.co.uk domain above, but I do for my live domain (let's call it mywebsite.com), and I was seeing the exact same problem on this domain (hence why I'm trying to debug the problem). Unfortunately I can't experiment with the live domain (as it's live) and I would like to avoid having to buy a second certificate for essayme.co.uk just for debugging (unless absolutely necessary). The problem I was seeing: my live domain, mywebsite.com (not its real name), has a valid SSL certificate. Visiting https://www.mywebsite.com displayed the webpage as expected. I had set up forwarding (like in the question above) from the naked domain (mywebsite.com) to https://www.mywebsite.com) Visiting http://mywebsite.com redirected to https://www.mywebsite.com as expected. However, visiting https://mywebsite.com would freeze and time out (as in the question above). I also tried forwarding it to http://www.otherwebsite.com as an experiment (i.e. forwarding to another site that does not use SSL), but the result was the same: Visiting http://mywebsite.com redirected to http://www.otherwebsite.com as expected. Visiting https://mywebsite.com would freeze and time out again. So I set up essayme.co.uk as an experiment to try and understand why it doesn't work.

    Read the article

  • windows 2000 freezing during large disk write

    - by robert
    We have a windows 2000 sp4 server which freezes up for about 1 minutes while its web-app does a ~500mb write operation. I can see the webapp start to do I/O activity (through process explorer) then the RDP session becomes unresponsive, you can click on windows and buttons but nothing happens. When the disk write finally finishes the session 'catches up' on all the mouse clicks you did during the freeze in a mad flurry of window activity and the server returns to normal. During the freeze the web-app stops as well. The same behaviour happens on the console of the server. (so I know its not a network thing) Nothing appears in the Event logs. Its like nothing happened. I have upgraded all the HP hardware drivers to the latest proliant support pack. And also run a HP hardware diagnostics which found nothing wrong. What would cause a disk write to lock the rest of the OS?

    Read the article

  • Ubuntu 12.10 Unity & Gnome Shell problems

    - by user109292
    I'm experiencing some problems since I decided to upgrade Ubuntu to 12.10 version two days ago. Firstly, I cannot select the Unity environment I previously used on 12.04 without opening the terminal with Ctrl+Alt+T and typing setsid unity. When I select the Unity environment on the account page when I start the computer, it automatically switch back to Gnome and launch my session. I tried to set back Unity using the setsid unity tip, and it worked fine. But after few minutes, everything freeze and I cannot control anything anymore. The only option left is to press the Power button of my Asus EeePC and switch everything off. Question 1 : What can I do to get my Unity environment back on 12.10 from the start, without using the terminal every time? What should I do to prevent the all system to freeze once done? Secondly, and since I cannot use Unity for new, I'm using an other interface, GNOME Shell. What's bothering me is that the Activities bar (let's call it like that, 'cause I don't know the proper name) and the Internet bar (or any bar from any other window) cannot merge into one another, reducing the display of the screen I'm actually using to peanuts! Question 2 : Is there a way to merge those two bars? Or is there a way to hide the Activities bar when I'm not using it like on Unity environment?

    Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >