Search Results

Search found 27682 results on 1108 pages for 'display none'.

Page 23/1108 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

  • Using native resolution on external display results in stretched, out of bounds image

    - by Roni Yaniv
    I have an HP min 311 netbook with Windows XP, which I've connected to a Samsung SyncMaster 2043BW display via the supplied analog cable. The external display's native res is 1680x1050, which the netbook's ION GPU supports. I've configured the external display as the single display (no cloning or any such fancy stuff). However, once I set the native res, the image just stretches out. It looks squashed, and it goes outside the monitor's edges. In contrast, lower resolutions manage to stay within the monitor's display edges, though obviously they are skewed in some way (vertically or horizontally). BTW, the only res which seems to be displayed relatively clearly (it's the least blurry) is 1280x720. I tried looking all over the web for an explanation/advice but could not find any. I already played with the settings on the external display itself several times. So either it's not that, or I missed something. Has someone run into this issue? I need help.

    Read the article

  • Changing dual-monitor settings without closing the laptop lid on OS X

    - by hekevintran
    I have a Unibody MacBook hooked up to an external display. By default when I boot up, the system will go to dual-monitor mode. I want to use only the external display. The Apple supplied solution to this problem is to close the lid of the laptop which puts the machine into sleep mode and then move the mouse around to wake it up again. Because the machine is being woken up with the lid closed, when the displays are detected the system finds only the external. After the system is functional again, you can open the lid if you want and the laptop screen will be non-functional until you either tell the system to detect displays from the system preferences or you turn off the external display. Every time I want to use only the external display, I must reach my hand over to close the lid, wait for the machine to sleep, jigger the mouse, wait for the machine to wake up, and finally open the lid again because I don't want the machine to overheat. I feel that this is very stupid to have to do. Why is there no button or menu option that says "don't use this screen"? Is there any third-party software way to change the screen setup that does not involve physically closing the lid and playing a game of "are you sleeping" in order to switch such a simple software setting? We are in the 21st Century and honestly this is childish.

    Read the article

  • Misconfigured external monitor on Mac OS X Snow Leopard 10.6.3

    - by Mike
    I have an external monitor (specifically, an HDTV) hooked up to my 2.53GHz 13" macbook pro. This display works fine and I use it with my mac in clamshell mode (eg. with an external keyboard/mouse and the laptop closed and the built-in mac screen turned off) My Mac has multiple users on it. For User A I can use the mac with the external monitor in both clamshell and dual-monitor setups. For User B, I can use the monitor in a dual-monitor setup, but whenever I switch to clamshell mode the Mac switches to an incorrect output resolution or frequency setting that my HDTV doesn't recognize, resulting in a blank screen and a message about Unsupported Resolution. Chances are I did this to myself by misconfiguring my display settings at some point in the past, but I have no idea how to undo it. I (obviously) can't seen the display to change the settings when it's borked. I can see the display settings if I switch to Dual-monitor mode, but those settings only affect the dual monitor setup; no matter how I change the settings in dual-monitor mode, the clamshell mode setup remains borked. How can I dig myself out of this hole?

    Read the article

  • GUI interfaces to ATI card behave weirdly out of the box and after updates.

    - by jdk
    My Lenovo W500 came with an ATI Mobility FireGL V5700 and both the Catalyst control center software and Vista display manager display four monitors. What's really annoying is the behaviour. My two active displays (laptop display + my external monitor) are always #s 3 and 4 respectively which doesn't make sense. This is out of the box. Additionally dragging & dropping is jumpy and displays #1 and 2 (always inactive because they don't exist to the software) are often preventing me from dragging #3 and 4 to the rightmost side. They also auto-snap to weird positions and certain sensible positions like position one directly over top of the other are not possible. The exact same annoyances are present when using the Windows Display manager too. In other words the interface is crap and I'm looking for a fix that's not wishing I had gone with nVidia instead. I've updated drivers, and Catalyst control centre. Have latest Windows and AMD/ATI updates. Any thoughts? Graphics Software Driver Packaging Version 8.563.2.1-090401a-079160C-Lenovo Provider ATI Technologies Inc. 2D Driver Version 7.01.01.849 2D Driver File Path /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/Class/{4D36E968-E325-11CE-BFC1-08002BE10318}/0001 Direct3D Version 7.14.10.0630 OpenGL Version 6.14.10.8306 Catalyst® Control Center Version 2009.0401.1328.22301 Graphics Hardware Primary Adapter Graphics Card Manufacturer Powered by ATI Graphics Chipset ATI Mobility FireGL V5700 Device ID 9591 Vendor 1002 Subsystem ID 2126 Subsystem Vendor ID 17AA Graphics Bus Capability PCI Express 2.0 Maximum Bus Setting PCI Express 2.0 x16 BIOS Version 010.088.000.021 BIOS Part Number BK-ATI VER010.088.000.021.034663 BIOS Date 2009/09/30 Memory Size 512 MB Memory Type DDR3 Core Clock in MHz 600 MHz Memory Clock in MHz 700 MHz

    Read the article

  • How to stop Vista from auto changing video resolution?

    - by bialix
    I have new Acer Aspire Revo R3600 computer with Vista pre-installed. The computer has NVidia video adapter. While connecting 17" LCD monitor (LG L1742S) via VGA cable it works fine, and I can change the resolution of the display from max 1920*1024 down to some other value, and after reboot the settings are restored correctly. But when I'm connecting bigger full HD 1920*1080 display (LG E2250) via VGA cable then every boot I have the same problem: I see boot progress window, then I see MS logo, then I see welcome screen then I start to see desktop and suddenly monitor switch off and show me the message about unsupported frequency of input signal As I understand Vista tries to auto-change resolution and sets wrong parameters. I've tried to boot into safe mode and into low-resolution mode, every time I have the same problem: Vista boot-up and suddenly monitor stops working. I've tried to connect this monitor to notebook with Windows XP and has no problem to work with this display on its native resolution. How can I disable this display resolution auto-changer in Vista? Or maybe there is another workaround?

    Read the article

  • Conflict between some JavaScript and jQuery on same page

    - by hollyb
    I am using a JavaScript function and some jQuery to perform two actions on a page. The first is a simple JS function to hide/show divs and change the active state of a tab: This is the JS that show/hides divs and changes the active state on some tabs: var ids=new Array('section1','section2','section3'); function switchid(id, el){ hideallids(); showdiv(id); var li = el.parentNode.parentNode.childNodes[0]; while (li) { if (!li.tagName || li.tagName.toLowerCase() != "li") li = li.nextSibling; // skip the text node if (li) { li.className = ""; li = li.nextSibling; } } el.parentNode.className = "active"; } function hideallids(){ //loop through the array and hide each element by id for (var i=0;i<ids.length;i++){ hidediv(ids[i]); } } function hidediv(id) { //safe function to hide an element with a specified id document.getElementById(id).style.display = 'none'; } function showdiv(id) { //safe function to show an element with a specified id document.getElementById(id).style.display = 'block'; } The html: <ul> <li class="active"><a onclick="switchid('section1', this);return false;">ONE</a></li> <li><a onclick="switchid('section2', this);return false;">TWO</a></li> <li><a onclick="switchid('section3', this);return false;">THREE</a></li> </ul> <div id="section1" style="display:block;">TEST</div> <div id="section2" style="display:none;">TEST 2</div> <div id="section3" style="display:none;">TEST 3</div> Now the problem.... I've added the jQuery image gallery called galleria to one of the tabs. The gallery works great when it resides in the div that is intially set to display:block. However, when it is in one of the divs that is set to display: none; part of the gallery doesn't work when the div is toggled to be visible. Specifically, the following css ceases to be written (this is created by galleria jQuery): element.style { display:block; height:50px; margin-left:-17px; width:auto; } For the life of me, I can't figure out why the gallery fails when it's div is set to display: none. Since this declaration is overwritten when a tab is clicked (via the Javascript functions above), why would this cause a problem? As I mentioned, it works perfectly when it lives the in display: block; div. Any ideas? I don't expect anybody to be familiar with the jQuery galleria image gallery... but perhaps an idea of how one might repair this problem? Thanks!

    Read the article

  • Can't get SWT Display on Mac OS X.

    - by Mattias Holmqvist
    I'm running Mac OS X Snow Leopard and wan't to access the Display from the activator in an OSGi bundle. Below is the start method for my activator: @Override public void start(BundleContext context) throws Exception { ExecutorService service = Executors.newSingleThreadExecutor(); service.execute(new Runnable() { @Override public void run() { Display display = Display.getDefault(); Shell shell = new Shell(display); Text helloText = new Text(shell, SWT.CENTER); helloText.setText("Hello SWT!"); helloText.pack(); shell.pack(); shell.open(); while (!shell.isDisposed()) { if (!display.readAndDispatch()) display.sleep(); } display.dispose(); } }); } Calling this code in a Windows environment works fine, but deploying on Mac OS X I get the following output: 2009-10-14 17:17:54.050 java[2010:10003] *** __NSAutoreleaseNoPool(): Object 0x101620d20 of class NSCFString autoreleased with no pool in place - just leaking 2009-10-14 17:17:54.081 java[2010:10003] *** __NSAutoreleaseNoPool(): Object 0x100119240 of class NSCFNumber autoreleased with no pool in place - just leaking 2009-10-14 17:17:54.084 java[2010:10003] *** __NSAutoreleaseNoPool(): Object 0x1001024b0 of class NSCFString autoreleased with no pool in place - just leaking 2009-10-14 17:17:54.086 java[2010:10003] *** __NSAutoreleaseNoPool(): Object 0x7fff701d7f70 of class NSCFString autoreleased with no pool in place - just leaking 2009-10-14 17:17:54.087 java[2010:10003] *** __NSAutoreleaseNoPool(): Object 0x100113330 of class NSCFString autoreleased with no pool in place - just leaking 2009-10-14 17:17:54.092 java[2010:10003] *** __NSAutoreleaseNoPool(): Object 0x101624540 of class NSCFData autoreleased with no pool in place - just leaking . . . I've used the -XstartOnFirstThread VM argument without any luck. I'm on 64-bit Cocoa but I've also tried 32-bit Cocoa. When trying on Carbon I get the following error: Invalid memory access of location 00000020 eip=9012337c When debugging into the Display class I can see that the Displays[] array only contains null references.

    Read the article

  • How to quickly switch monitors on multi-monitor setup?

    - by Saxtus
    At my desktop PC, I have 3 displays hooked up on my Palit GeForce GTX 480 to extend my desktop: DVI: Samsung SyncMaster T220 (22" 16:10, 1680x1050, as my main) DVI: Samsung SyncMaster 940BF (19" 4:3, 1280x1024) HDMI: Sony Bravia KDL-32D3000 (32" 16:9, 1360x768) As expected, the GFX card can only utilize 2 of the displays at any given time, so I have to manually switch using Windows' "Display Properties" dialog, each time I want to switch between them. I've tried UltraMon, DisplayFusion and PowerStrip (so please don't refer me to a question where those are given as solutions) but they are unable to switch monitors. Instead they can only change display resolutions and settings on the existing active monitors, with specially weird results when I've saved the monitor states and then tried to switch monitors using the saved states! Any idea on how to bypass the awful "Display Properties" dialog and it's "confirm your change" timer?

    Read the article

  • Use xrandr to set the absolute position of the screen?

    - by Eli
    I am running XFCE on Fedora 15. I use xrandr to set the secondary display (HDMI-0) to be to the right of the primary (DVI-0), however it is always at the top-right. Is it possible to set the absolute position of the display (e.g. DVI-0 at 0,0 and HDMI-0 at 1920,56), or even set the display to be at the bottom-right? I cannot modify the Xorg.conf, which would be the easy way, as that would mean generating an Xorg.conf file (there is none right now), and I do not know of any automated tool to do that (other than the fglrx driver). The reason why I need this is because I want to extend the XFCE panel accross both monitors, but with there being a 56-pixel-wide dead zone at the bottom I cannot do this.

    Read the article

  • How to quickly switch monitors on multi-monitor setup? (W7)

    - by Saxtus
    At my desktop PC, I have 3 displays hooked up on my Palit GeForce GTX 480 to extend my desktop: DVI: Samsung SyncMaster T220 (22" 16:10, 1680x1050, as my main) DVI: Samsung SyncMaster 940BF (19" 4:3, 1280x1024) HDMI: Sony Bravia KDL-32D3000 (32" 16:9, 1360x768) As expected, the GFX card can only utilize 2 of the displays at any given time, so I have to manually switch using Windows' "Display Properties" dialog, each time I want to switch between them. I've tried UltraMon, DisplayFusion and PowerStrip (so please don't refer me to a question where those are given as solutions) but they are unable to switch monitors. Instead they can only change display resolutions and settings on the existing active monitors, with specially weird results when I've saved the monitor states and then tried to switch monitors using the saved states! Any idea on how to bypass the awful "Display Properties" dialog and it's "confirm your change" timer? Thanks in advance.

    Read the article

  • Output to TV only works if monitor is plugged in

    - by Greg Sansom
    I am trying to use my TV as the sole output for a computer. The computer has a graphics card with 2 outputs - one RGB and one DVI. I have the RGB output going to the TV, and when the DVI output is connected to a monitor, display works fine on both the monitor and the TV. If I turn off the monitor, or even turn off power to the monitor, the TV continues to display the desktop. If I unplug the DVI cable from the monitor (remember that the monitor doesn't have any power at this point), the TV stops presenting the desktop and displays a "Not Accepted" message. When starting up the computer, the TV displays fine, but stops working at the "press ctrl-alt-delete" screen unless the monitor is connected. How can I make the TV show the display without the monitor? The TV is an LG RT-42PZ45V. The graphics card is an ATI Radeon series HD4350 512MB GDDR2. The computer is running Windows Server 2008 r2.

    Read the article

  • Solution to wirelessly project tablet desktop?

    - by Robert
    I’m trying to find a device that would allow a windows 7 client to wirelessly connect and display their screen to a projector while still connected to the wireless network. The idea is to allow a professor to still project and display content while walking around the room with their tablet. To date, haven’t been able to find a solution that meets the requirements, has anyone stumbled across one yet? Requirements Must support Windows 7 Must be able to connect to WPA2 Personal(and hopefully enterprise) Must not use any usb dongles – those get lost/damaged given a chance. Goal Wirelessly display screen to projector without cables from tablet/laptop.

    Read the article

  • How can I launch a GUI session on a remote Ubuntu Desktop via SSH from a non-GUI Linux shell?

    - by Vihung
    I am setting up a test environment, made up of various Linux boxes, and I have the need to launch an instance of Firefox on a remote machine via ssh. The remote machine has Ubuntu Desktop (11) and Firefox installed. The source machine is a Continuous Integration server and it creates an ssh session to the remote machine from a non-GUI environment. It then runs a script, which tries to launch Firefox on the remote machine. However, since the ssh session is a from a non-GUI environment, there is no display. Is it possible to have a headless X-windows display? i.e. a virtual display in the remote environment for Firefox to run in? What options do I have?

    Read the article

  • Can I sleep one of the displays on a dual-monitor setup? [duplicate]

    - by archedpenguin
    This question already has an answer here: Can I sleep one of the displays on a dual-monitor setup (running Windows 7)? 4 answers I want to be able to 'put the display to sleep' on one of my two monitors when it isn't needed, so it doesn't distract me or use unnecessary power. Ideally, the display would be asleep, but the OS would remain in dual-monitor mode, so I could still have a variety of windows open in the sleeping monitor's display space, which would mean I wouldn't have to keep switching between single- and dual-monitor modes. Its the same as "Can I sleep one of the displays on a dual-monitor setup (running Windows 7)?" I just wasn't sure I could comment on such an old thread. None of the answers there provided a perfect solution and I was wondering if there is now a solution available.

    Read the article

  • Sony VAIO Broken Computer Screen automatically connect to external

    - by iberos
    I have a SONY Vaio with a screen that's broken as in I only see white or black dots on the display. I would like to have it start automatically to the external, but my previous computer settings for an external display has it set on "extend" rather than "duplicate". Therefore, whenever I boot up, I have the extended screen on the external, which does me no good since I can't really do anything with my start bar still located on the broken screen. I hope that makes sense. Has anyone else run into this problem? I've seen some things about starting in BIOS. Will my broken computer screen still be able to display the contents when I'm in BIOS? How do I get there? or are there keystrokes for a Sony Vaio that will automatically let me duplicate screens or direct everything to the external? Thanks!

    Read the article

  • Installation after boot shows no display

    - by matthias
    I just booted 12.04 for installation from USB-stick. But there is a problem with the display. After boot I see a rectangle on the lower left corner of the screen, after a while I see "Ubuntu 12.04 ..." loading from USB-Stick, the Ubuntu-Desktop starts fine, clicking on Ubuntu-Install seems to work ... till identification, then Installation-window closed and ... nothing more happens. So I want to try Installation direct from the Menu at the beginning - before Ubuntu-12.04-loading. Butt I cannot see any menus at that time. I think there is an graphic-problem? How can I get the installation by menus, how would the Installation via Desktop going to work? Bye Matthias

    Read the article

  • Display ‘–Select–’ in an ASP.NET DropDownList

    - by Ken Cox [MVP]
    A purchaser of my book writes: “I would like a drop down list to display the text: "-Select-" initially instead of the first value of the data it is bound to.” Here you go…   <%@ Page Language="VB" %> <script runat="server">     Protected Sub Page_Load(ByVal sender As Object, _                            ...(read more)

    Read the article

  • Display date/time in Ubuntu lock screen (cinnamon-like)

    - by 3l4ng
    I was using Ubuntu 13.04 till a few days ago. I had installed Nemo and I guess cinnamon got installed too (I was still using Unity nonetheless). One of the good things about that was the lock screen somehow changed to mimick cinnamon's (with the background as a darkened version of desktop background and date/time displayed), something like this: I have no idea how this happened, but it looked great. It does not seem to work on Ubuntu 13.10. Anyone has any ideas to get a similar lock screen? I just need to display the date/time on one side with the bg as a darkened version of my desktop wallpaper

    Read the article

  • Can't replace MDM Display Manager with LightDM!

    - by Naveen
    Well, I installed MDM, and found it's buggy with my VGA hardware due to the following screen after rebooting: This screen repeats, even if I choose Yes or No As I have access to the console (by pressing ALT+F2) I tried, sudo dpkg-reconfigure lightdm which gave me the following screen, Even if I choose LightDM nothing happens at the next reboot. The first screen comes back! dpkg -l | grep -i mdm command results me following, ii mdm___________1.0.4-0~webupd8~precise_____Gnome Display Mnager ii mint-mdm-themes__1.0.5-0~webupd8~precise1_____Linux Mint MDM Themes (underscores are spaces) Please help... I need LightDM login screen back! Thanks!

    Read the article

  • Strange display language in gnome shell

    - by khalafuf
    I logged in gnome-shell, and found that the display language is set to some strange asian language (I think) without my prompt. I tried to change the locale settings but found that the default language is English (how?) despite of that strange language. Here's a snapshot, See the strange word instead of "Activity": I'm on Ubuntu 12.04 LTS. Output of locale: LANG=zh_CN.UTF-8 LANGUAGE=zh_CN:en_US:en LC_CTYPE="zh_CN.UTF-8" LC_NUMERIC=en_US.UTF-8 LC_TIME=en_US.UTF-8 LC_COLLATE="zh_CN.UTF-8" LC_MONETARY=en_US.UTF-8 LC_MESSAGES="zh_CN.UTF-8" LC_PAPER=en_US.UTF-8 LC_NAME=en_US.UTF-8 LC_ADDRESS=en_US.UTF-8 LC_TELEPHONE=en_US.UTF-8 LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=en_US.UTF-8 LC_ALL= Output of locale -a: C C.UTF-8 de_CH.utf8 en_AG en_AG.utf8 en_AU.utf8 en_BW.utf8 en_CA.utf8 en_DK.utf8 en_GB.utf8 en_IE.utf8 en_IN en_IN.utf8 en_NG en_NG.utf8 en_NZ.utf8 en_PH.utf8 en_SG.utf8 en_US.utf8 en_ZA.utf8 en_ZM en_ZM.utf8 en_ZW.utf8 POSIX zh_CN.utf8 zh_SG.utf8 Solved: This answer did it.

    Read the article

  • Application to display battery info

    - by Nik
    First of all, I am not sure the title of this question is the most appropriate however this is what I meant to say, There are many ways to extend the life of a laptop battery. One way is by not connecting it to the AC adapter all the time which will overcharge it. I read that in this website. Is there an application which automatically prevents the charging of the battery once it has reached 80% charged? I mean that is such a cool feature. Sometimes people tend to forget to remove the AC adapter and this could diminish the capacity and reduce the life time of the battery. Does the battery indicator in ubuntu display info or pop-up when the battery is almost dead (dead not in the sense of usage time) but rather a degraded battery?

    Read the article

  • Parallel Environment (PE) on Sun Grid Engine (6.2u5) won't run jobs: "only offers 0 slots"

    - by Peter Van Heusden
    I have Sun Grid Engine set up (version 6.2u5) on a Ubuntu 10.10 server with 8 cores. In order to be able to reserve multiple slots, I have a parallel environment (PE) set up like this: pe_name serial slots 999 user_lists NONE xuser_lists NONE start_proc_args /bin/true stop_proc_args /bin/true allocation_rule $pe_slots control_slaves FALSE job_is_first_task TRUE urgency_slots min accounting_summary FALSE This is associated with the all.q on the server in question (let's call the server A). However, when I submit a job that uses 4 threads with e.g. qsub -q all.q@A -pe serial 4 mycmd.sh, it never gets scheduled, and I get the following reasoning from qstat: cannot run in PE "serial" because it only offers 0 slots Why is SGE saying "serial" only offers 0 slots, since there are 8 slots available on the server I specified (server A)? The queue in question is configured thus (server names changed): qname all.q hostlist @allhosts seq_no 0 load_thresholds np_load_avg=1.75 suspend_thresholds NONE nsuspend 1 suspend_interval 00:05:00 priority 0 min_cpu_interval 00:05:00 processors UNDEFINED qtype BATCH INTERACTIVE ckpt_list NONE pe_list make orte serial rerun FALSE slots 1,[D=32],[C=8], \ [B=30],[A=8] tmpdir /tmp shell /bin/sh prolog NONE epilog NONE shell_start_mode posix_compliant starter_method NONE suspend_method NONE resume_method NONE terminate_method NONE notify 00:00:60 owner_list NONE user_lists NONE xuser_lists NONE subordinate_list NONE complex_values NONE projects NONE xprojects NONE calendar NONE initial_state default s_rt INFINITY h_rt 08:00:00 s_cpu INFINITY h_cpu INFINITY s_fsize INFINITY h_fsize INFINITY s_data INFINITY h_data INFINITY s_stack INFINITY h_stack INFINITY s_core INFINITY h_core INFINITY s_rss INFINITY h_rss INFINITY s_vmem INFINITY h_vmem INFINITY,[A=30g], \ [B=5g]

    Read the article

  • Byte Size Tips: How to Stop OS X from Changing the Display Brightness Automatically

    - by The Geek
    After getting a new MacBook Air and deciding to try out OS X for a while, I started wondering why the battery would suddenly start dying really fast, but only when I was sitting at the kitchen table. That’s when I noticed the display brightness kept changing on its own… and realized the problem. OS X, just like your phone, and any modern device, tries to figure out the brightness of the room you’re in, and adjust the brightness of the screen. If you are over in Windows, it’s called “Adaptive” brightness, while your phone will just call it “Auto”. While this technology is great in theory, I don’t really need max brightness all the time, and I like to control it manually to make sure I’m getting the best battery life. Open up System Preferences, head to Displays. Then uncheck the Automatically adjust brightness setting.     

    Read the article

  • Log in manager doesn't appear after editing /etc/X11/default-display-manager

    - by hamed
    I have ubuntu 11.10 , and I installed kde and I choosed kdm mistakly, as mentioned here I did this procedure Pretty simple. Open the file /etc/X11/default-display-manager with your editor of choice. Make sure you invoke that editor as root, otherwise it won't work. In that file there's a single line: /usr/bin/kdm Change that to /usr/bin/gdm and save the file. Reboot and you're in Gnome. now ,after booting, the log in manager gdm or kdm didn't appear . how can I fix this?

    Read the article

  • grub does not display activity during boot

    - by Dale E. Moore
    Prior to Ubuntu 11.04 I could configure grub so that after the menu is displayed and the system is booting detail of the boot activity appears. Now there's just a blank screen between the menu and gdm login. How do I coax Ubuntu 11.04 to display the boot activity? Dale E. Moore Oh yeah; I asked the same question here http://ubuntuforums.org/showthread.php?t=1760753 and they didn't know the answer. This question was asked here https://answers.launchpad.net/ubuntu/+source/grub2/+question/160511 too, with no new insight.

    Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >