Search Results

Search found 2794 results on 112 pages for 'peu ping'.

Page 23/112 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

• debian lenny xen bridge networking problem

  - by Sasha

  DomU isn't talking to the world, but it talks to Dom0. Here are the tests that I made: Dom0 (external networking is working): ping 188.40.96.238 #Which is Domu's ip PING 188.40.96.238 (188.40.96.238) 56(84) bytes of data. 64 bytes from 188.40.96.238: icmp_seq=1 ttl=64 time=0.092 ms DomU: ping 188.40.96.215 #Which is Dom0's ip PING 188.40.96.215 (188.40.96.215) 56(84) bytes of data. 64 bytes from 188.40.96.215: icmp_seq=1 ttl=64 time=0.045 ms ping 188.40.96.193 #Which is the gateway - fail PING 188.40.96.193 (188.40.96.193) 56(84) bytes of data. ^C --- 188.40.96.193 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1013ms The system is debian lenny with a normal setup. Here is my configs: uname -a Linux green0 2.6.26-2-xen-686 #1 SMP Wed Aug 19 08:47:57 UTC 2009 i686 GNU/Linux cat /etc/xen/green1.cfg |grep -v '#' kernel = '/boot/vmlinuz-2.6.26-2-xen-686' ramdisk = '/boot/initrd.img-2.6.26-2-xen-686' memory = '2000' root = '/dev/xvda2 ro' disk = [ 'file:/home/xen/domains/green1/swap.img,xvda1,w', 'file:/home/xen/domains/green1/disk.img,xvda2,w', ] name = 'green1' vif = [ 'ip=188.40.96.238,mac=00:16:3E:1F:C4:CC' ] on_poweroff = 'destroy' on_reboot = 'restart' on_crash = 'restart' ifconfig eth0 Link encap:Ethernet HWaddr 00:24:21:ef:2f:86 inet addr:188.40.96.215 Bcast:188.40.96.255 Mask:255.255.255.192 inet6 addr: fe80::224:21ff:feef:2f86/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3296 errors:0 dropped:0 overruns:0 frame:0 TX packets:2204 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:262717 (256.5 KiB) TX bytes:330465 (322.7 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) peth0 Link encap:Ethernet HWaddr 00:24:21:ef:2f:86 inet6 addr: fe80::224:21ff:feef:2f86/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:3407 errors:0 dropped:657431448 overruns:0 frame:0 TX packets:2291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:319941 (312.4 KiB) TX bytes:338423 (330.4 KiB) Interrupt:16 Base address:0x8000 vif2.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:151 errors:0 dropped:33 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1164 (1.1 KiB) TX bytes:20974 (20.4 KiB) ip a s 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: peth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 link/ether 00:24:21:ef:2f:86 brd ff:ff:ff:ff:ff:ff inet6 fe80::224:21ff:feef:2f86/64 scope link valid_lft forever preferred_lft forever 4: vif0.0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 5: veth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 6: vif0.1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 7: veth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 8: vif0.2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 9: veth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 10: vif0.3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 11: veth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 12: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:24:21:ef:2f:86 brd ff:ff:ff:ff:ff:ff inet 188.40.96.215/26 brd 188.40.96.255 scope global eth0 inet6 fe80::224:21ff:feef:2f86/64 scope link valid_lft forever preferred_lft forever 14: vif2.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 32 link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff inet6 fe80::fcff:ffff:feff:ffff/64 scope link valid_lft forever preferred_lft forever brctl show bridge name bridge id STP enabled interfaces eth0 8000.002421ef2f86 no peth0 vif2.0 ip r l Dom0: 188.40.96.192/26 dev eth0 proto kernel scope link src 188.40.96.215 default via 188.40.96.193 dev eth0 DomU: 188.40.96.192/26 dev eth0 proto kernel scope link src 188.40.96.238 default via 188.40.96.193 dev eth0

  Read the article

• error in installing informatica.

  - by raskart

  "The installer cannot ping the domain.Verify that Informatica Services is running on the domain host and select Retry. STDOUT: [1212] Command [ping] failed with error [[2121] Node [raskart] Domain [Doraskart] Host:Port [Doraskart:6001] has failed to ping back.]. exitcode -1 " This error occured when i tried to install informatica in my system. i checked informatica services and it was running and i have killed it and again started it but still then i have the problem. Please help me in this regard.Thanks in advance.

  Read the article

• Error with JSF2 and RichFaces

  - by Miguel Ping

  Hi, I'm trying to use RichFaces on a working JSF2 application. I incorporated the RichFaces jars, changed the web.xml but got the following error: 17:49:13,097 SEVERE [javax.enterprise.resource.webcontainer.jsf.application] Error Rendering View[/login.xhtml]: java.lang.NullPointerExcept ion at com.sun.faces.application.ApplicationImpl.createComponent(ApplicationImpl.java:936) at com.sun.faces.facelets.tag.jsf.CompositeComponentTagHandler.createComponent(CompositeComponentTagHandler.java:154) at com.sun.faces.facelets.tag.jsf.ComponentTagHandlerDelegateImpl.createComponent(ComponentTagHandlerDelegateImpl.java:311) at com.sun.faces.facelets.tag.jsf.ComponentTagHandlerDelegateImpl.apply(ComponentTagHandlerDelegateImpl.java:145) at javax.faces.view.facelets.DelegatingMetaTagHandler.apply(DelegatingMetaTagHandler.java:114) at javax.faces.view.facelets.CompositeFaceletHandler.apply(CompositeFaceletHandler.java:91) at javax.faces.view.facelets.DelegatingMetaTagHandler.applyNextHandler(DelegatingMetaTagHandler.java:120) at com.sun.faces.facelets.tag.jsf.ComponentTagHandlerDelegateImpl.apply(ComponentTagHandlerDelegateImpl.java:204) at javax.faces.view.facelets.DelegatingMetaTagHandler.apply(DelegatingMetaTagHandler.java:114) at javax.faces.view.facelets.CompositeFaceletHandler.apply(CompositeFaceletHandler.java:91) at com.sun.faces.facelets.compiler.NamespaceHandler.apply(NamespaceHandler.java:86) at javax.faces.view.facelets.CompositeFaceletHandler.apply(CompositeFaceletHandler.java:91) at com.sun.faces.facelets.compiler.EncodingHandler.apply(EncodingHandler.java:75) at com.sun.faces.facelets.impl.DefaultFacelet.include(DefaultFacelet.java:301) at com.sun.faces.facelets.impl.DefaultFacelet.include(DefaultFacelet.java:360) at com.sun.faces.facelets.impl.DefaultFacelet.include(DefaultFacelet.java:339) at com.sun.faces.facelets.impl.DefaultFaceletContext.includeFacelet(DefaultFaceletContext.java:191) at com.sun.faces.facelets.tag.ui.CompositionHandler.apply(CompositionHandler.java:149) at com.sun.faces.facelets.compiler.NamespaceHandler.apply(NamespaceHandler.java:86) at com.sun.faces.facelets.compiler.EncodingHandler.apply(EncodingHandler.java:75) at com.sun.faces.facelets.impl.DefaultFacelet.apply(DefaultFacelet.java:145) at com.sun.faces.application.view.FaceletViewHandlingStrategy.buildView(FaceletViewHandlingStrategy.java:716) at com.sun.faces.application.view.FaceletViewHandlingStrategy.renderView(FaceletViewHandlingStrategy.java:351) at com.sun.faces.application.view.MultiViewHandler.renderView(MultiViewHandler.java:126) at org.ajax4jsf.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:100) at org.ajax4jsf.application.AjaxViewHandler.renderView(AjaxViewHandler.java:176) at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:127) at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:101) at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:139) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:313) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:336) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:242) at org.ajax4jsf.webapp.BaseXMLFilter.doXmlFilter(BaseXMLFilter.java:206) at org.ajax4jsf.webapp.BaseFilter.handleRequest(BaseFilter.java:290) at org.ajax4jsf.webapp.BaseFilter.processUploadsAndHandleRequest(BaseFilter.java:388) at org.ajax4jsf.webapp.BaseFilter.doFilter(BaseFilter.java:515) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:274) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:242) at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:734) at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:541) at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:479) at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:407) at org.apache.catalina.authenticator.FormAuthenticator.forwardToLoginPage(FormAuthenticator.java:318) at org.apache.catalina.authenticator.FormAuthenticator.authenticate(FormAuthenticator.java:243) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:559) at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:95) at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.process(SecurityContextEstablishmentValve.java:126) at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.invoke(SecurityContextEstablishmentValve.java:70) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:158) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:368) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:872) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:653) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:951) at java.lang.Thread.run(Thread.java:619) It seems that some jars are missing, but I cannot seem to find this cause. The above error is the only thing that the log spits out. Here's web.xml: <context-param> <param-name>javax.faces.FACELETS_LIBRARIES</param-name> <param-value>/WEB-INF/faces-validator-tags/general.taglib.xml; /WEB-INF/faces-converter-tags/general.converter.taglib.xml </param-value> </context-param> <!-- Startup Servlet <servlet> <servlet-name>StartUpServlet</servlet-name> <servlet-class>pt.cgd.agile.util.StartupServlet</servlet-class> <load-on-startup>1</load-on-startup> </servlet> --> <context-param> <param-name>javax.faces.DISABLE_FACELET_JSF_VIEWHANDLER</param-name> <param-value>true</param-value> </context-param> <context-param> <param-name>org.richfaces.SKIN</param-name> <param-value>blueSky</param-value> </context-param> <!-- Making the RichFaces skin spread to standard HTML controls --> <context-param> <param-name>org.richfaces.CONTROL_SKINNING</param-name> <param-value>enable</param-value> </context-param> <context-param> <param-name>javax.faces.STATE_SAVING_METHOD</param-name> <param-value>server</param-value> </context-param> <context-param> <param-name>org.richfaces.SKIN</param-name> <param-value>blueSky</param-value> </context-param> <context-param> <param-name>org.richfaces.CONTROL_SKINNING</param-name> <param-value>enable</param-value> </context-param> <filter> <display-name>RichFaces Filter</display-name> <filter-name>richfaces</filter-name> <filter-class>org.ajax4jsf.Filter</filter-class> </filter> <filter-mapping> <filter-name>richfaces</filter-name> <servlet-name>Faces Servlet</servlet-name> <dispatcher>REQUEST</dispatcher> <dispatcher>FORWARD</dispatcher> <dispatcher>INCLUDE</dispatcher> </filter-mapping> <listener> <listener-class>com.sun.faces.config.ConfigureListener</listener-class> </listener> <!-- Just here so the JSF implementation can initialize, *not* used at runtime --> <servlet> <servlet-name>Faces Servlet</servlet-name> <servlet-class>javax.faces.webapp.FacesServlet</servlet-class> <load-on-startup>1</load-on-startup> </servlet> <!-- Just here so the JSF implementation can initialize --> <servlet-mapping> <servlet-name>Faces Servlet</servlet-name> <url-pattern>*.jsf</url-pattern> </servlet-mapping> <login-config> <auth-method>FORM</auth-method> <form-login-config> <form-login-page>/login.jsf</form-login-page> <form-error-page>/loginError.jsf</form-error-page> </form-login-config> </login-config> <error-page> <exception-type>java.lang.Throwable</exception-type> <location>/errors/error.jsf</location> </error-page>

  Read the article

• Allow Incoming Responses Apache. On Ubuntu 11.10 - Curl

  - by Daniel Adarve

  I'm trying to get a Curl Response from an outside server, however I noticed I cant neither PING the server in question nor connect to it. I tried disabling the iptables firewall but I had no success. My server is running behind a Cisco Linksys WRTN310N Router with the DD-wrt firmware Installed. In which I already disabled the firewall. Here are my network settings: Ifconfig eth0 Link encap:Ethernet HWaddr 00:26:b9:76:73:6b inet addr:192.168.1.120 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::226:b9ff:fe76:736b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:49713 errors:0 dropped:0 overruns:0 frame:0 TX packets:30987 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52829022 (52.8 MB) TX bytes:5438223 (5.4 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:341 errors:0 dropped:0 overruns:0 frame:0 TX packets:341 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:27604 (27.6 KB) TX bytes:27604 (27.6 KB) /etc/resolv.conf nameserver 192.168.1.1 /etc/nsswitch.com passwd: compat group: compat shadow: compat hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis /etc/host.conf order hosts,bind multi on /etc/hosts 127.0.0.1 localhost 127.0.0.1 callcenter # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.120 netmask 255.255.255.0 network 192.168.1.1 broadcast 192.168.1.255 gateway 192.168.1.1 The Url to which im trying to get a connection to is https://www.veripayment.com/integration/index.php When I ping it on terminal heres what I get daniel@callcenter:~$ ping https://www.veripayment.com/integration/index.php ping: unknown host https://www.veripayment.com/integration/index.php daniel@callcenter:~$ ping www.veripayment.com PING www.veripayment.com (69.172.200.5) 56(84) bytes of data. --- www.veripayment.com ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms PHP Function in codeigniter public function authorizePayment(){ //--------------------------------------------------- // Authorize a payment //--------------------------------------------------- // Get variables from POST array $post_str = "action=payment&business=" .urlencode($this->input->post('business')) ."&vericode=" .urlencode($this->input->post('vericode')) ."&item_name=" .urlencode($this->input->post('item_name')) ."&item_code=" .urlencode($this->input->post('item_code')) ."&quantity=" .urlencode($this->input->post('quantity')) ."&amount=" .urlencode($this->input->post('amount')) ."&cc_type=" .urlencode($this->input->post('cc_type')) ."&cc_number=" .urlencode($this->input->post('cc_number')) ."&cc_expdate=" .urlencode($this->input->post('cc_expdate_year')).urlencode($this->input->post('cc_expdate_month')) ."&cc_security_code=" .urlencode($this->input->post('cc_security_code')) ."&shipment=" .urlencode($this->input->post('shipment')) ."&first_name=" .urlencode($this->input->post('first_name')) ."&last_name=" .urlencode($this->input->post('last_name')) ."&address=" .urlencode($this->input->post('address')) ."&city=" .urlencode($this->input->post('city')) ."&state_or_province=" .urlencode($this->input->post('state_or_province')) ."&zip_or_postal_code=" .urlencode($this->input->post('zip_or_postal_code')) ."&country=" .urlencode($this->input->post('country')) ."&shipping_address=" .urlencode($this->input->post('shipping_address')) ."&shipping_city=" .urlencode($this->input->post('shipping_city')) ."&shipping_state_or_province=" .urlencode($this->input->post('shipping_state_or_province')) ."&shipping_zip_or_postal_code=".urlencode($this->input->post('shipping_zip_or_postal_code')) ."&shipping_country=" .urlencode($this->input->post('shipping_country')) ."&phone=" .urlencode($this->input->post('phone')) ."&email=" .urlencode($this->input->post('email')) ."&ip_address=" .urlencode($this->input->post('ip_address')) ."&website_unique_id=" .urlencode($this->input->post('website_unique_id')); // Send URL string via CURL $backendUrl = "https://www.veripayment.com/integration/index.php"; $this->curl->create($backendUrl); $this->curl->post($post_str); $return = $this->curl->execute(); $result = array(); // Explode array where blanks are found $resparray = explode(' ', $return); if ($resparray) { // save results into an array foreach ($resparray as $resp) { $keyvalue = explode('=', $resp); if(isset($keyvalue[1])){ $result[$keyvalue[0]] = str_replace('"', '', $keyvalue[1]); } } } return $result; } This gets an empty result array. This function however works well in the previous server where the script was hosted before. No modifications where made whatsoever Thanks in Advance

  Read the article

• Mercurial: Remove changeset from remote branch

  - by Miguel Ping

  Hi, Is there a way to remove a from a remote changeset, or to remove an entire changeset? I accidentely pushed a .war file to a remote repo and I want to remove it. Thanks

  Read the article

• CSS: achieving TWO-WAY infinite scroll with mouse drag

  - by Miguel Ping

  Hi, I'm trying to create an infinite scroll component. I'm using this site as a tutorial, but it seems that I can only get the infinite scroll on one way, because when I add elements to the leftmost side, the scrollLeft property auto-adjusts thus the page gets a quirky scroll, jumping instead of making a smooth movement. Is there any way of achieving infinite scroll both-ways? I don't plan to use scrolling buttons, just mouse drag for moving the scroll view.

  Read the article

• php cpanel

  - by Miguel Ping

  I have a php account with my provider, and I also have cpanel installed for me. I currently have two drupal sites there, let's called the main myMainSite and another one under construction called myNewSite. So when I go to www.myMainSite.com, I go to the main site. When I go to myNewSite.myMainSite.com, i go to the drupal site that is under construction. My question is, when my under construction site goes live, I want that all users that go to www.myMainSite.com see the new site (the one that is under myNewSite.myMainSite.com). How can I accomplish this with cpanel? is it within the "addon domains" configuration? I don't want a redirect that changes the address bar, ie, I want to keep the original url.

  Read the article

• write in file is not complete without quitting the IDLE(Python GUI)

  - by Yi-Ping

  I want to write something in a file. for example, fo=open('C:\Python\readline_test.txt','a') for i in range(3): st='abc'+'\n' fo.write(st) fo.close then I open this python file in IDLE, and click "Run Module". There is no error message but I find the writing is not complete if I didn't quit IDLE. How can I complete the file writing without quitting the IDLE? Thanks. (I use Python 2.6.2 on Windows XP.)

  Read the article

• jQuery attach function to 'load' event of an element

  - by Miguel Ping

  Hi, I want to attach a function to a jQuery element that fires whenever the element is added to the page. I've tried the following, but it didn't work: var el = jQuery('<h1>HI HI HI</H1>'); el.one('load', function(e) { window.alert('loaded'); }); jQuery('body').append(el); What I really want to do is to guarantee that another jQuery function that is expecting some #id to be at the page don't fail, so I want to call that function whenever my element is loaded in the page. To clarify, I am passing the el element to another library (in this case it's a movie player but it could be anything else) and I want to know when the el element is being added to the page, whether its my movie player code that it is adding the element or anyting else.

  Read the article

• DNS problems on CentOS fresh install

  - by Rick Koshi

  I'm having some DNS issues on a new box I'm installing with CentOS 6.2. I am able to look up names using nslookup, dig, or host. I am able to ping machines by name or by IP address. However, when I try other tools, such as ssh, wget, or yum, they are unable to resolve names. For example: # wget http://www.google.com --2012-03-08 14:48:06-- http://www.google.com/ Resolving www.google.com... failed: Name or service not known. wget: unable to resolve host address `www.google.com' # ssh www.google.com ssh: Could not resolve hostname www.google.com: Name or service not known # ping -c 1 www.google.com PING www.l.google.com (74.125.113.106) 56(84) bytes of data. 64 bytes from vw-in-f106.1e100.net (74.125.113.106): icmp_seq=1 ttl=46 time=43.6 ms --- www.l.google.com ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 59ms rtt min/avg/max/mdev = 43.665/43.665/43.665/0.000 ms # host www.google.com www.google.com is an alias for www.l.google.com. www.l.google.com has address 74.125.113.99 www.l.google.com has address 74.125.113.103 www.l.google.com has address 74.125.113.104 www.l.google.com has address 74.125.113.105 www.l.google.com has address 74.125.113.106 www.l.google.com has address 74.125.113.147 My /etc/nsswitch.conf file is the default, including this (standard) line: hosts: files dns /etc/resolv.conf is as set up by DHCP: ; generated by /sbin/dhclient-script nameserver 192.168.1.254 192.168.1.254 is a working DNS server (my DSL modem, working for years with other machines) Anyone know why ping would work, but ssh/wget would fail? Per NcA's suggestion, I tried changing /etc/resolv.conf to point to 8.8.8.8. Oddly enough, this does make it work. Obviously, my DSL modem is responding to DNS requests in some way that some parts of Linux's resolution system don't like. Looking at the tcpdump, I am unable to see what the difference is. Certainly, both servers are sending the same addresses. Here's the output from tcpdump -nn -X with the server set to the DNS server on the DSL modem. It's clearly replying with the correct addresses, but ssh/wget don't seem happy with it for some reason: 15:53:52.133580 IP 192.168.1.254.53 > 192.168.1.2.54836: 33157 7/0/0 CNAME www.l.google.com., A 74.125.115.105, A 74.125.115.106, A 74.125.115.147, A 74.125.115.99, A 74.125.115.103, A 74.125.115.104 (148) 0x0000: 4500 00b0 e33a 0000 ff11 53b1 c0a8 01fe E....:....S..... 0x0010: c0a8 0102 0035 d634 009c 7528 8185 8180 .....5.4..u(.... 0x0020: 0001 0007 0000 0000 0377 7777 0667 6f6f .........www.goo 0x0030: 676c 6503 636f 6d00 0001 0001 c00c 0005 gle.com......... 0x0040: 0001 0007 acd0 0008 0377 7777 016c c010 .........www.l.. 0x0050: c02c 0001 0001 0000 0001 0004 4a7d 7369 .,..........J}si 0x0060: c02c 0001 0001 0000 0001 0004 4a7d 736a .,..........J}sj 0x0070: c02c 0001 0001 0000 0001 0004 4a7d 7393 .,..........J}s. 0x0080: c02c 0001 0001 0000 0001 0004 4a7d 7363 .,..........J}sc 0x0090: c02c 0001 0001 0000 0001 0004 4a7d 7367 .,..........J}sg 0x00a0: c02c 0001 0001 0000 0001 0004 4a7d 7368 .,..........J}sh 15:53:52.135669 IP 192.168.1.254.53 > 192.168.1.2.54836: 65062- 0/0/0 (32) 0x0000: 4500 003c e33b 0000 ff11 5424 c0a8 01fe E..<.;....T$.... 0x0010: c0a8 0102 0035 d634 0028 98f9 fe26 8000 .....5.4.(...&.. 0x0020: 0001 0000 0000 0000 0377 7777 0667 6f6f .........www.goo 0x0030: 676c 6503 636f 6d00 001c 0001 gle.com..... I'm not enough of an expert to know if this is malformed in some way, but ping seems to do the right thing with it. For comparison, here's the same thing when querying 8.8.8.8: 15:57:27.990270 IP 8.8.8.8.53 > 192.168.1.2.49028: 59114 7/0/0 CNAME www.l.google.com., A 74.125.113.105, A 74.125.113.103, A 74.125.113.106, A 74.125.113.147, A 74.125.113.104, A 74.125.113.99 (148) 0x0000: 4500 00b0 5530 0000 2f11 6453 0808 0808 E...U0../.dS.... 0x0010: c0a8 0102 0035 bf84 009c 39f8 e6ea 8180 .....5....9..... 0x0020: 0001 0007 0000 0000 0377 7777 0667 6f6f .........www.goo 0x0030: 676c 6503 636f 6d00 0001 0001 c00c 0005 gle.com......... 0x0040: 0001 0001 516a 0008 0377 7777 016c c010 ....Qj...www.l.. 0x0050: c02c 0001 0001 0000 0116 0004 4a7d 7169 .,..........J}qi 0x0060: c02c 0001 0001 0000 0116 0004 4a7d 7167 .,..........J}qg 0x0070: c02c 0001 0001 0000 0116 0004 4a7d 716a .,..........J}qj 0x0080: c02c 0001 0001 0000 0116 0004 4a7d 7193 .,..........J}q. 0x0090: c02c 0001 0001 0000 0116 0004 4a7d 7168 .,..........J}qh 0x00a0: c02c 0001 0001 0000 0116 0004 4a7d 7163 .,..........J}qc 15:57:28.018909 IP 8.8.8.8.53 > 192.168.1.2.49028: 31984 1/1/0 CNAME www.l.google.com. (102) 0x0000: 4500 0082 7b1b 0000 2f11 3e96 0808 0808 E...{.../.>..... 0x0010: c0a8 0102 0035 bf84 006e c67e 7cf0 8180 .....5...n.~|... 0x0020: 0001 0001 0001 0000 0377 7777 0667 6f6f .........www.goo 0x0030: 676c 6503 636f 6d00 001c 0001 c00c 0005 gle.com......... 0x0040: 0001 0001 517f 0008 0377 7777 016c c010 ....Q....www.l.. 0x0050: c030 0006 0001 0000 0258 0026 036e 7334 .0.......X.&.ns4 0x0060: c010 0964 6e73 2d61 646d 696e c010 0016 ...dns-admin.... 0x0070: 91f3 0000 0384 0000 0384 0000 0708 0000 ................ 0x0080: 003c .< I still don't know why the server's reply is adequate for ping but not for ssh/wget. If anyone has ideas, I'd be happy to hear them. For now, though, I can either refer to an outside DNS server or set up my own server on the new box. It's a workaround that seems like it should be unnecessary, but will allow me to proceed.

  Read the article

• C - How can i get return value of command passed to execl?

  - by Skuja

  I know that it is possible to read commands output with a pipe? But what about getting return value ? For example i want to execute: execl("/bin/ping", "/bin/ping" , "-c", "1", "-t", "1", ip_addr, NULL); How can i get returned value of ping command to find out if it returned 0 or 1?

  Read the article

• Spring & Hibernate EJB Events

  - by Miguel Ping

  Is it possible to define a spring-managed EJB3 hibernate listener? I have this definition in my persistence.xml: <properties> <property name="hibernate.ejb.interceptor" value="my.class.HibernateAuditInterceptor" /> <property name="hibernate.ejb.event.post-update" value="my.class.HibernateAuditTrailEventListener" /> </properties> But I would like to manage HibernateAuditInterceptor and HibernateAuditTrailEventListener with spring, so I can do some bean injection (ex: session-scoped bean) within these classes. Is this possible?

  Read the article

• VB.net XML Parser loop

  - by StealthRT

  Hey all i am new to XML parsing on VB.net. This is the code i am using to parse an XML file i have: Dim output As StringBuilder = New StringBuilder() Dim xmlString As String = _ "<ip_list>" & _ "<ip>" & _ "<ip>192.168.1.1</ip>" & _ "<ping>9 ms</ping>" & _ "<hostname>N/A</hostname>" & _ "</ip>" & _ "<ip>" & _ "<ip>192.168.1.6</ip>" & _ "<ping>0 ms</ping>" & _ "<hostname>N/A</hostname>" & _ "</ip>" & _ "</ip_list>" Using reader As XmlReader = XmlReader.Create(New StringReader(xmlString)) Do Until reader.EOF reader.ReadStartElement("ip_list") reader.ReadStartElement("ip") reader.ReadStartElement("ip") reader.MoveToFirstAttribute() Dim theIP As String = reader.Value.ToString reader.ReadToFollowing("ping") Dim thePing As String = reader.ReadElementContentAsString().ToString reader.ReadToFollowing("hostname") Dim theHN As String = reader.ReadElementContentAsString().ToString MsgBox(theIP & " " & thePing & " " & theHN) Loop End Using I put the "do until reader.EOF" myself but it does not seem to work. It keeps giving an error after the first go around. I must be missing something? David

  Read the article

• How do I get broadcast to work with djcelery+ghettoq

  - by user560833

  I am using djcelery 2.1.4 with ghettoq 0.4.5 and django 1.2.3 and I am able to run tasks all day long, but when I try to use any broadcast functionality it fails without errors. Take the simplest case -- I run celeryd: python manage.py celeryd The daemon starts and I try to run a ping: >>> from celery.task.control import ping >>> ping() [] I can see the message that ping created appear in the database, but apparently none of the nodes are picking it up? Am I doing something wrong here? Does broadcast not work with carrot?

  Read the article

• char pointer array in c#

  - by james

  consider the following c++ code #include "stdafx.h" #include<iostream> using namespace std; void ping(int,char* d[]); void ping(int a,char *b[]) { int size; size=sizeof(b)/sizeof(int); // total size of array/size of array data type //cout<<size; for(int i=0;i<=size;i++) cout<<"ping "<<a<<b[i]<<endl; } int _tmain(int argc, _TCHAR* argv[]) { void (*funcptr)(int,char* d[]); char* c[]={"a","b"}; funcptr= ping; funcptr(10,c); return 0; } how can i implement the same in c#.. m new to c#. how can i have char pointer array in c#?

  Read the article

• I am requesting ideas on manipulating output from an array and parse to something useful

  - by Cyber Demon

  First I am new to PS scripting. Please be gentle. This simple script I have written is ok. $Iplist = Get-Content ips.txt foreach ($ip in $Iplist) { .\psping -h -n 3 -w 0 $ip >> results.csv } Move-Item "C:\ping\results.csv" ("C:\ping\aftermath\{0:yyyyMMddhhmm}.csv" -f (get-date)) The Output is as follows, as an example (I used www.google.com): Pinging 74.125.225.48 with 32 bytes of data: 3 iterations (warmup 0) ping test: Reply from 74.125.225.48: 54.14ms Reply from 74.125.225.48: 54.85ms Reply from 74.125.225.48: 54.48ms Ping statistics for 74.125.225.48: Sent = 3, Received = 3, Lost = 0 (0% loss), Minimum = 54.14ms, Maximum = 54.85ms, Average = 54.49ms Latency Count 54.14 1 54.17 0 54.21 0 54.25 0 54.29 0 54.32 0 54.36 0 54.4 0 54.44 0 54.47 1 54.51 0 54.55 0 54.59 0 54.62 0 54.66 0 54.7 0 54.74 0 54.77 0 54.81 0 54.85 1 What I'm looking for is something to show me the following as an output. ServerIP Name TimeStamp Results AverageResponseTime in milli-seconds www.google.com 2014-08-14T16:09:59 Up 53 Can you guide me?

  Read the article

• Orange dope ses outils de communications et de collaboration Cloud avec une version « as a service » de sa solution Business Together

  Cloud : Orange veut accélère le développement des communications et de la collaboration hébergées Avec une nouvelle version « as a service » de sa solution Business Together Il y a peu, nous parlions d'un secteur en plein boom avec la gestion de flottes mobiles et de la carte que voulait jouer Orange face aux éditeurs. Mais le cloud, toujours en très forte croissance, est essentiellement porté par les outils collaboratifs. Dans ce domaine, on parle souvent de « pure player » comme Office 365, les Google Apps for Business, voire de Zoho. Mais tout comme pour la gestion de flottes, on évoque un peu moins les offres...

  Read the article

• Microsoft gagne contre Motorola, les brevets Wi-Fi et H.264 violés par la Xbox et Windows doivent être soumis au FRAND, selon la justice

  Brevets : Microsoft gagne contre Motorola en Allemagne les terminaux Android du constructeur interdits de ventes sur le territoire Les procès Android se poursuivent avec leurs lots de rebondissements, et laissent peu à peu place à des décisions de justice. Après le verdict de l'affaire Google contre Oracle pour violation de brevets Java dans Android, dont le géant de la recherche est sorti vainqueur, c'est au tour d'un autre gros feuilleton IT qui dure depuis plus d'un an de livrer sa sentence. Un tribunal régional de Munich en Allemagne a arrêté que les téléphones Android de Motorola Mobility violent les brevets de Microsoft. Plus précisément, ces dispositifs empiètent s...

  Read the article

• Google, Microsoft et Facebook sont-ils comparables ? Ou bien ces entreprises sont-elles trop uniques en leur genre ?

  Google, Microsoft et Facebook sont-ils comparables ? Ou bien ces entreprises sont-elles trop uniques en leur genre ? Don Dodge, un passionné d'économie numérique travaillant chez Google et ayant travaillé pour Microsoft, se demande si trois grandes firmes de l'IT peuvent être comparables. En effet, Microsoft, Google et Facebook sont toutes trois très importantes, pour ne pas dire colossales, et elles sont toutes apparues comme innovantes à leur création. A leurs débuts, elles étaient nettement moins imposantes et les investisseurs hésitaient même à y investir. C'est un peu le cas de Facebook aujourd'hui, la firme surévaluée à outrance. Tous en veulent leur part, mais peu sont sûr de ce que cela va leur rapporter.

  Read the article

• Windows 8 : tout savoir sur le compte utilisateur connecté et ses différences avec un compte Windows classique

  Windows 8 : tout savoir sur le nouveau compte utilisateur connecté Et ses différences avec un compte Windows classique Le grand public risque d'être un peu perdu en lançant Windows 8 pour la première fois. Pas tellement avec la nouvelle interface (ex-Metro) qui sert de menu « Démarrer » (même si elle déroute un peu au début). Mais parce qu'avec le nouveau système de Microsoft, le "Cloud" devient une réalité plus que concrète. Dès le lancement, le système demande en effet de choisir entre un compte local ? à l'ancienne ? et un compte connecté. Nous ne reviendront pas sur le premier choix - un compte classique comme dans Windows 7, Vista et XP. ...

  Read the article

• Brevets : Microsoft gagne contre Motorola en Allemagne, les terminaux Android du constructeur interdits de ventes sur le territoire

  Brevets : Microsoft gagne contre Motorola en Allemagne les terminaux Android du constructeur interdits de ventes sur le territoire Les procès Android se poursuivent avec leurs lots de rebondissements, et laissent peu à peu place à des décisions de justice. Après le verdict de l'affaire Google contre Oracle pour violation de brevets Java dans Android, dont le géant de la recherche en est sorti vainqueur, c'est au tour d'un autre gros feuilleton IT qui dure depuis plus d'un an de livrer sa sentence. Un tribunal régional de Munich en Allemagne a arrêté que les téléphones Android de Motorola Mobility violent les brevets de Microsoft. Plus précisément, ces dispositifs empièten...

  Read the article

• Les 4 types d'emails reçus par les informaticiens, lequel est le plus courant ?

  Les 4 types d'emails reçus par les informaticiens, lequel est le plus courant ? Etre un pro de l'IT dans une entreprise, ça veut bien souvent dire faire aussi le support technique pour tous les collègues un peu technophobes. Comme on arrête pas le progrès, les appels à l'aide se font désormais très souvent par e-mail, plutôt que de visu ou par téléphone. On peut classer en 4 catégories le genre de messages typiquement reçus. Les voici : L'e-mail vague Contient très peu d'informations et ne donne pas de détails. En gros c'est "débrouille toi tout seul, et vite". Qu'il s'agisse d'un problème critique ou d'un problème insignifiant émanant de l'ignorance de l'u...

  Read the article

• Qt Quick : des interfaces déclaratives hors norme ? Pourquoi ne sont-elles pas encore répandues ?

  Il y a peu, Nokia lançait Qt Quick, un nouveau module de Qt permettant de décrire des interfaces graphiques, un paradigme alors présenté comme assez nouveau. Or, une simple recherche à l'aide de Google montre bien que ces technologies ne sont pas récentes du tout, on trouve par exemple des traces de K, un langage presque ésotérique tellement il est peu connu du grand nombre actuellement, dans les années 90. Qu'est-ce qui a changé depuis lors ? Aussi, on peut remarquer que d'autres technologies phares dans le développement applicatif telles que .NET ou Java en disposent depuis belle lurette. On peut notamment citer XAML (arrivé avec le .NET Framework 3.0) du côté .NET ou Swul pour Java. Qu'ont-ils donc de différent ? Peut-on les comparer ? Ils tentent tous d'atteindre un cer...

  Read the article

• Qt Quick : des interfaces déclaratives hors normes ? Pourquoi ne sont-elles pas encore répandues ?

  Il y a peu, Nokia lançait Qt Quick, un nouveau module de Qt permettant de décrire des interfaces graphiques, un paradigme alors présenté comme assez nouveau. Or, une simple recherche à l'aide de Google montre bien que ces technologies ne sont pas récentes du tout, on trouve par exemple des traces de K, un langage presque ésotérique tellement il est peu connu du grand nombre actuellement, dans les années 90. Qu'est-ce qui a changé depuis lors ? Aussi, on peut remarquer que d'autres technologies phares dans le développement applicatif telles que .NET ou Java en disposent depuis belle lurette. On peut notamment citer XAML (arrivé avec le .NET Framework 3.0) du côté .NET ou Swul pour Java. Qu'ont-ils donc de différent ? Peut-on les comparer ? Ils tentent tous d'atteindre un cer...

  Read the article

• La free software foundation présente sa liste des projets open source prioritaires et invite les utilisateurs à contribuer à l'essor du libre

  Le libre a besoin de vous ! La free software foundation invite les utilisateurs à contribuer aux projets libresLe logiciel libre. On l'aime, on l'utilise, on le partage, ou encore on le commercialise. Cependant combien sont ceux qui pensent un temps soit peu à supporter le logiciel libre ? Combien évitent souvent le bouton « Donate » des pages officielles des projets comme « The GIMP » ? Combien sont-ils à consacrer un peu de leur temps pour la promotion du logiciel libre ? Dans la mentalité de...

  Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >