Search Results

Search found 913 results on 37 pages for 'proprietary'.

Page 23/37 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

  • Energy Firms Targetted for Sensitive Documents

    - by martin.abrahams
    Numerous multinational energy companies have been targeted by hackers who have been focusing on financial documents related to oil and gas field exploration, bidding contracts, and drilling rights, as well as proprietary industrial process documents, according to a new McAfee report. "It ... speaks to quite a sad state of our critical infrastructure security. These were not sophisticated attacks ... yet they were very successful in achieving their goals," said Dmitri Alperovitch, McAfee's vice president for threat research. Apparently, the attacks can be traced back over several years, creating a sustained security compromise that has provided access to highly sensitive information that is of huge financial value to competitors. The value of IRM as an additional layer of protection is clear. Whether your infrastructure security is in a sad state or is state of the art, breaches are always a possibility - and in any case, a lot of sensitive information is shared with third parties whose infrastructure security might not be as good as yours. IRM protects the individual information assets directly so that, even if infrastructure security is compromised, your critical information is enrypted and trackable and only accessible to authenticated, authorised, audited users. The full McAfee report is available here.

    Read the article

  • Radeon HD 6850 VMware 3D Support?

    - by Matt
    I'm a new Ubuntu user (new to all of linux actually). I've installed Ubuntu 11.10 x64 and have been enjoying it, but I wanted to see how it would perform using VMware for small time gaming since I find dual booting too much of a nuisance to even bother using Ubuntu at all (sorry!). I have an Asus EAH6850 DirectCU Radeon HD 6850 graphics card and I've installed the additional ATI/AMD proprietary FGLRX graphics driver, but when I open a Windows XP 32bit machine I installed through VMware, I get this message: "The GPU driver currently installed on this host may cause issues with VMware products. If you notice any issues please disable the 3D support in the affected virtual machines." I still have 3D capabilities in the VM but they are very very choppy even running the DX tests (the spinning cube). I've seen people on youtube and other forums saying that since the new 3D acceleration in VMware 8 gaming is very possible through VMs (and I've seen them running the DX tests with the spinning cube very smoothly). I'm wondering if my graphics card isn't fully supported or if I have installed it wrong. Also when I check system info (on the host Ubuntu machine) it says "Graphics VESA:BARTS" Should my Radeon HD 6850 be showing up there? The rest of my basic system info i5 2500k 8GB 1600MHz memory Guest is running with access to all 4 cores of processor and 3gb memory assigned.

    Read the article

  • Ubuntu 11.10 and Mobility radeon HD 4570, 512MB can't find working drivers

    - by Slavak
    i'm pretty new to Linux and my new problem is ATI drivers. When i installed Ubuntu then i had black screen issue with the blinking in left upper corner, fixed it with F6 and set the "nolapic" mode, can boot only with "nolapic". Now the problem is the drivers. The suggested drivers, from the "Additional drivers" are not working. Always freeze at the login screen, the divers are: ATI/AMD proprietary FGLRX graphics driver Tried this method: http://drivers.downloadatoz.com/tutorial/28786,how-to-fix-amd-catalyst-11-10-not-working-on-ubuntu-11-10-issues.html? but this method break it down really hard, not ever that helped anymore: sudo /usr/share/ati/fglrx-uninstall.sh # (if it exists); sudo apt-get remove --purge fglrx*; sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon ; sudo apt-get install xserver-xorg-video-ati; sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core; sudo dpkg-reconfigure xserver-xorg Now i'm here with a fresh install and i cant find anything that works, can someone help me please! I like Ubuntu, but i need to get rid of the lagg, or its Windows 7 only for me then :( Thanks for reading!

    Read the article

  • Why is my wireless significantly slower on Ubuntu 12.04, as compared to windows 7?

    - by user89266
    I'm dual booting 12.04, and Win7. Just a tiny bit of background, I'm starting to get more and more interested in programming and 3d modelling, so I'd like to learn more about ubuntu as a result of those interests. Still a complete newb though! Anyway, When downloading on windows, I get 1.5mb/s easy. Now I swap over to Ubuntu, and it hasn't topped 150 kb/s since I installed it some 6 months ago. I'd downloaded most of my programs on windows, so I never really noticed it, but as I'm committing to ubuntu more, it's starting to hinder me. I'm with Shaw, on their Highspeed 20, which gives me 20 mbps down, and 6mbps up. Speedtest.com shows me varying figures somewhat close to what shaw says they give on both windows and ubuntu, which is to be expected, given that it is shaw afterall... So, I don't know what you guys need to know, and I know even less about how to get it to you. Whatever information you guys need, tell me how to get it, how to get it up here, and i'll get it on here! I thought it might be that I'm using a proprietary driver, when an open sourced one would work better? But I really have no clue. Any help would be very much appreciated. Thanks guys!

    Read the article

  • Diablo 3 "freezes" periodically

    - by Shauna
    I'm running Diablo 3 (start edition, digital download) on the following: Ubuntu 12.04 64-bit (stock Unity, Gnome, etc; kernel version 3.2.0-29-generic) Wine version 1.5.11 (base, from Wine's PPA, game started with setarch i386 -3) Intel i7 920 CPU nVidia GTX260 with driver version 295.49 ("post-release updates" entry within the proprietary drivers tool), dual monitors 6GB RAM Every so often (and what appears to be at random), the game video will freeze up. I can still move the mouse, and it reacts to ctrl+alt+f2 to drop into text mode, but I can't get back to the desktop (which means I can check terminal to see what's going on after launching from terminal, especially since even in windowed mode, the secondary screen gets shut off by the game), and I can't continue to play the game. In order to get it running again, I have to restart lightdm, then relaunch the game (or, in a couple of rare cases, I had to restart the computer entirely, because running sudo service lightdmn [stop/start] doesn't appear to react). Turning down the video settings seems to have helped in some cases, but not all of them. Times it's frozen on me: The beginning of The Fallen Start quest part 6 - kill the Wretched Mother, right as you walk out of New Tristram and engage in the monsters on the northern path (repeatedly froze here until I adjusted the graphics down) Within the cinematic/event upon finding Deckard Cain While fighting the skeletons to protect Deckard Cain When about to enter Leoric's passage after Cain sends you back to where you found him That's as far as I've gotten through the game so far. Additionally, this doesn't happen on other games I play and seems to only occur with Diablo 3. Has anyone else run into this issue and know a possible cause or fix, or at least know where I can look (and what to look for) to figure out why this is happening?

    Read the article

  • Unity does not load when selecting Xorg open source radeon driver

    - by Teddy Thorpe
    When I select the X.org Radeon open source driver, Unity does not load. However, when I select the Proprietary AMD Driver from the official Ubuntu repository, Unity does load. Why is Unity doing this? I had no problems with switching between these drivers in Ubuntu 12.04 LTS. This started happening when I upgraded to Ubuntu 12.10. Before I ever installed the propriatery AMD driver, the X.org driver loaded Unity fine, but very sluggishly. I downloaded the AMD driver from their official website and installed that first and that is what started this problem. I removed that driver and went back to X.org and X.org didn't load Unity either. Then using Synaptic, I installed the AMD driver from the Ubuntu repositories and thats what I'm using now. I'm very confused why that downloaded AMD driver would effect X.org. I have a AMD Radeon HD 6620G. It's integrated graphics on my AMD A8-3500M APU (Accelerated Processing Unit as AMD advertises it).

    Read the article

  • Problem with SANE and CardScan

    - by TiuTalk
    I have a CardScan 60 II device and installed SANE in my Ubuntu 10.10 laptop. The problem is I can't make scanimage find the device. Quote: $ sudo sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x08f0 [Corex Technologies Corporation], product=0x1000 [Corex CardScan 60], chip=LM9832/3) at libusb:006:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. But I can't find the device: $ sudo scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

    Read the article

  • 10.10 boots to command line login prompt

    - by greggory.hz
    I recently installed Ubuntu 10.10 on a computer that was previously running 10.04 (that worked fine). Now, each time I boot up, it starts up in a command line login prompt. I can login and it stays at the command line (as expected). I can then manually start gdm with sudo start gdm and it works fine. I can also enable compiz (using proprietary nvidia drivers) so I'm reasonably confident that it's not a driver problem (at least not in the sense that the drivers just flat out aren't working). Interestingly, if I leave it at the command prompt without logging in, after about 5 or 10 minutes, gnome starts up on its own. I'm not sure what is causing this. This is what dmesg | tail gives me after a manual start of gdm: [ 15.664166] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.18 Tue Jan 18 21:46:26 PST 2011 [ 15.991304] type=1400 audit(1297543976.953:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=990 comm="apparmor_parser" [ 16.606986] eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [ 18.798506] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 26.740010] eth0: no IPv6 routers present [ 90.444593] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 189.252208] audit_printk_skb: 21 callbacks suppressed [ 189.252213] type=1400 audit(1297544150.218:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1876 comm="apparmor_parser" [ 189.252584] type=1400 audit(1297544150.218:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1876 comm="apparmor_parser" [ 351.159585] lo: Disabled Privacy Extensions

    Read the article

  • Trying to make ZeroRadiant work on Lubuntu 11.10

    - by maniat1k
    I'm looking to use ZeroRadiant to work on ubuntu, it's to create maps on urban terror, I know that works on windows and mac. I found this HOWTO but could not make it work. I've got stock on this when I do. ~/ZeroRadiant-src$ scons target=radiant,q3map2 config=release at the end shows me this: collect2: ld returned 1 exit status scons: *** [build/release/radiant/radiant.bin] Error 1 scons: building terminated because of errors. there's a note on the how to that says: If you get other errors, you may try asking for help in the GtkRadiant IRC channel, which is listed on the main ZeroRadiant page. the page does not there and I could find that IRC channel. EDIT thanks to @jokerdino in the chat sow me this If you have the proprietary NVIDIA driver installed and you get the following error when executing the build target above: /usr/bin/ld: cannot find -lGL collect2: ld returned 1 exit status scons: *** [build/release/radiant/radiant.bin] Error 1 scons: building terminated because of errors. then you should install one of the nvidia-glx-dev* packages as mentioned above in Step A, then try to execute the main build target to compile GtkRadiant again. I don't have nvidia; I do have ATI AMD Radeon HD 6320, and looks like it works. GL_VERSION: 4.1.11251 Compatibility Profile Context GL_VENDOR: ATI Technologies Inc. GL_RENDERER: AMD Radeon HD 6320 Graphics I'm think I do have video issues but.. how do I detect this? how can I continue?

    Read the article

  • Can't complete dropbox installation from behind proxy in Ubuntu 11.10

    - by Mark Jones
    Problem: My PC on campus sits behind a proxy (requiring authentication) and I can't setup Dropbox. I am convinced that this is a proxy issue as I can't setup Ubuntu one either (but I don't use Ubuntu One so that is not a problem). I have looked at the Ubuntu One fix but it seems to be to modify settings explicitly related to Ubuntu One. I can install the nautilus-dropbox package (compiled from source and from .deb package from website and from software centre) but once I click OK from the "Dropbox Installation" dialog box (prompting me to download the proprietary daemon) the installation just freezes with the OK button pressed. When I look at its process in System Monitor its waiting channel is inet_wait_for_connect. I have set the following proxy directives thus far: Added mj22:**@proxy.waikato.ac.nz:80 information to network proxy settings under network in settings. Added http_host and http_port variables under gconf-editor-system-proxy Added 'host', 'authentication_password' 'authentication_user' and ticked 'user authentication' and 'use_http_proxy' under gconf-editor-system-http_proxy Added export http_proxy="http://mj22:**@proxy.waikato.ac.nz:80/" to /etc/bash.bashrc Added Acquire::http::proxy "http://mj22:**@proxy.waikato.ac.nz:80/"; to /etc/apt/apt.conf (which is what I imagine is letting Software Center retrieve packages). (where ** is my password) I have also added the equivalent ftp and https lines for the above entries. I get the internet fine and Software Centre can download packages but thats it. Related issues: The software centre can't fetch reviews (but can download packages). When trying to add an online account in Gnome 3 a dialog pop up appears with "Error getting a Request Token: Cannot connect to proxy (proxy.waikato.ac.nz)" Updates: After some time (10mins ish) Dropbox shows an error dialog box that reads: Trouble connecting to Dropbox servers. Maybe your internet connection is down, or you need to set you http_proxy environment variable. Is there a way I can see what environment variables are currently set?

    Read the article

  • 12.04, nvidia-settings makes one of my dual monitors grey and useless, disables network

    - by Kerrick
    I'm running Ubuntu 12.04 64-bit, Precise Pangolin, with a PNY GTS 250 1GB video card and a monitor plugged into each of the DVI ports. I'm using the proprietary drivers (post-release updates). If I set anything to do with Separate X Screens up in nvidia-settings (and write it to xorg.conf and reboot), my second monitor has a grey background, no menu bar, no ability to have a window on it, the second monitor doesn't get picked up in a screneshot, and if I move my mouse cursor to it it's an ugly black X. Plus, my network is unable to connect to anything. If I subsequently delete /etc/X11/xorg.conf and reboot, everything goes back to working, albeit with a single monitor activated. If I set anything to do with TwinView up in nvidia-settings, my second monitor starts working, but it isn't seen as a second monitor by Ubuntu, so I can't apply color calibration to it separately. Plus, my mouse gets "caught" between the monitors every time I try to move my cursor between the two. What gives? If it helps, this is the xorg.conf that nvidia-settings generates for Separate X Screens.

    Read the article

  • create a .deb Package from scripts or binaries

    - by tdeutsch
    I searched for a simple way to create .deb Packages for things which have no source code to compile (configs, shellscripts, proprietary software). This was quite a problem because most of the package tutorials are assuming you have a source tarball you want to compile. Then I've found this short tutorial (german). Afterwards, I created a small script to create a simple repository. Like this: rm /export/my-repository/repository/* cd /home/tdeutsch/deb-pkg for i in $(ls | grep my); do dpkg -b ./$i /export/my-repository/repository/$i.deb; done cd /export/avanon-repository/repository gpg --armor --export "My Package Signing Key" > PublicKey apt-ftparchive packages ./ | gzip > Packages.gz apt-ftparchive packages ./ > Packages apt-ftparchive release ./ > /tmp/Release.tmp; mv /tmp/Release.tmp Release gpg --output Release.gpg -ba Release I added the key to the apt keyring and included the source like this: deb http://my.default.com/my-repository/ ./ It looks like the repo itself is working well (I ran into some problems, to fix them I needed to add the Packages twice and make the temp-file workaround for the Release file). I also put some downloaded .deb into the repo, it looks like they are also working without problems. But my self created packages didn't... Wenn i do sudo apt-get update, they are causing errors like this: E: Problem parsing dependency Depends E: Error occurred while processing my-printerconf (NewVersion2) E: Problem with MergeList /var/lib/apt/lists/my.default.com_my-repository_._Packages E: The package lists or status file could not be parsed or opened. Has anyone an idea what I did wrong?

    Read the article

  • Higher resolutions unavailable with 2.6.38-8 kernel

    - by time-wastrel
    After upgrading to Natty and the 2.6.38-8 kernel I could no longer obtain the 1920x1080 resolution available in Maverick with 2.6.35-22. In fact the boot occasionally hung. However, after selecting the remaining 2.6.35-22 kernel, the high resolution was available. I then made the mistake of completely reinstalling, but could never get the higher resolutions with 2.6.38-8, no matter what I did. e.g. trying the nvidia proprietary driver, creating an xorg.conf. Even from the command line using xrandr --newmode "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync xrandr --addmode DVI-I-1 1920x1080_60.00 xrandr --output DVI-I-1 --mode 1920x1080_60.00 all I would get would be a blank screen and the monitor reporting no input. (Low resolutions displayed fine with xrandr.) I could actually add the 1920x1080 to the already existing probe-reported resolutions in the pool of available resolutions, but choosing it would give the blank screen. In the end I installed the 2.6.35-22 kernel again. The high resolution is back. For a while there, staying up all night and trying many things, I thought that a new video board or monitor might be needed, but deep down, I knew that they were both OK. My question is - "Is this some bug involving the latest kernel, that will go away, or if this persists in future kernels, is there a way to make sure that I can keep my native resolution?"

    Read the article

  • nvidia-settings makes one of my dual monitors grey and useless, disables network

    - by Kerrick
    I'm running Ubuntu 12.04 64-bit, Precise Pangolin, with a PNY GTS 250 1GB video card and a monitor plugged into each of the DVI ports. I'm using the proprietary drivers (post-release updates). If I set anything to do with Separate X Screens up in nvidia-settings (and write it to xorg.conf and reboot), my second monitor has a grey background, no menu bar, no ability to have a window on it, the second monitor doesn't get picked up in a screneshot, and if I move my mouse cursor to it it's an ugly black X. Plus, my network is unable to connect to anything. If I subsequently delete /etc/X11/xorg.conf and reboot, everything goes back to working, albeit with a single monitor activated. If I set anything to do with TwinView up in nvidia-settings, my second monitor starts working, but it isn't seen as a second monitor by Ubuntu, so I can't apply color calibration to it separately. Plus, my mouse gets "caught" between the monitors every time I try to move my cursor between the two. What gives? If it helps, this is the xorg.conf that nvidia-settings generates for Separate X Screens.

    Read the article

  • Gnome3 shell video corruption with ATI Radeon HD 4850 on 11.10 Oneiric

    - by AndyAtTheWebists
    I have a problem similar to what's been mentioned in a few other questions, namely: Ati incompatible with Gnome-shell? Gnome Shell Glitched Top Bar Ubuntu 11.10 I have read a number of other posts here and on other forums and have tried a bunch of different solutions. The Problem The problem manifests itself only in Gnome3. I have tried KDE, Unity and KFCE and all are fine. The graphics corruption is visible only on gnome panels (see images below). Everything works fine with the free ATI drivers, but they just lack power. The problem occurs with the proprietary ones from AMD/ATI. I have installed version 11.11 and 12.1 as per the instructions on wiki.cchtml.com/index.php/Ubuntu_Oneiric_Installation_Guide. I have the same exact problem in both cases. I have tried this on clean installs of Ubuntu 11.10 Oneiric Ocelot (x64 and x86) and on Linux Mint 12 (x64) with the same results. Also, it looks like after some time of not using it, the PC just freezes. Maybe an overheat? Will look into it. Things I've Tried I have tried the following fixes: Different versions of drivers from ATI including the latest - this worked for some, not for me. Installing Oneiric specific package generated from driver, as well as the default install Removed the Unity Global menu Disabled file manager handling desktop Disabled Compiz "detect refresh rate" Sync to VBlank in Compiz on and off Please help! This is the first time in 10 years that I've finally had the chance to switch my primary desktop to Linux (stopped doing .NET dev work), and this is really getting me down. This is what the problem looks like: And:

    Read the article

  • Can't shutdown Ubuntu (Wubi Installation)

    - by zsgre3nd3s7
    I downloaded Ubuntu 12.04 using Wubi. The installation went correctly and everything was working fine until I tried to shutdown. I clicked shutdown and then Ubuntu started shutdown, but as soon as I saw the Ubuntu logo with blank dots under, it froze. I had to perform a hard shutdown. After booting my computer back and going into Ubuntu, I tried shutting it down again but this time it took me on a black page with lots and lots of log writing on the screen and after a little while, it stopped writing stuff. I was able to input characters using the keyboard and everything, but it never shutdown. I had to perform a hard shutdown again. Now it always gives me a Ubuntu logo and freezes. What should I do? I know hard shutdowns are bad and want to avoid them. Is there anyway to make shutdowns work? I tried a reboot and it also froze on the Ubuntu logo. Sony VAIO Model E SVE17115FDB Laptop. Graphic card - AMD RADEON HD 7650M (and it installed correctly in Ubuntu). BIOS - H2O Bios. Processor - Intel i7-3612QM. Edit: I only installed the AMD/ATI proprietary drivers FGLRX, not the AMD/ATI post release drivers because they keep showing an error message. Here is jockey.log. Edit 2: Here is the log that i mentioned before that appeared on my screen, it appeared after i tried reinstalling my AMD driver but failed so i reinstalled the other one. Sorry for the quality i took those pictures with my phone.

    Read the article

  • Is my concept in open source license correct?

    - by tester
    I would like to justify whether my concept in the open source license is correct, as you know that, misunderstanding the terms may lead to a serious law sue. Thank you. The main difference among the open source license is whether the license is copyleft. Copyleft license means allow the others to reproduce, modify and distribute the products but the released product is bound by the same licensing restriction. That means they have to use the same license for the modified version. Also, the copyleft license require all the released modified version to be free software. On the other hand, if any others create derived work incorporating non-copyleft licensed code, they can choose any license for the code. The serveral kinds of license and comparsion GPL is a restrictive license. Software requires to released as GPL license if that integrate or is modified from the other GPL license software . The library used in developing GPL license software are also restricted to GPL and LGPL , proprietary software are not allowed to employ (or complied with) in any part of the GPL application. LGPL is similar to GPL , but was more permissive with regarding allow the using of other non-GPL software. BSD is relatively simple license, it allow developer to do anything on the original source code . The license holder do not hold any legal responsibilities for their released product. Apache license is evolved from the BSD license. The legal terms are improved and are written by legal professionals in a more modern way. It covers comprehensive intellectual property ownership and liability issues. Also, are there any popular license beside these? Thank you

    Read the article

  • Hybrid Graphics Functional won't work with my Asus UL30V anymore

    - by futuress
    The problem is that I am no longer able to boot in compatibility mode for just turning on my Nvidia graphics to install the driver. Because no login screen will appear if Ubuntu is loading. In Ubuntu 11.10 I was able to activate nvidia graphics only' option this way: 1) Change BIOS to 'compatibility mode' which will turn off the Intel card. 2) Install the Nvidia proprietary driver using Ubuntu's driver finder (Additional Drivers) and then reboot. I was not interested using only the Intel graphics, for the sake of battery life. Now I have both cards running and they drain my battery life dramatically. And the main problem of this configuration no OpenGL is available, so I can't play any games any more. At this point, I have a pre-solution. I uninstalled the nvidia drivers and installed bumblebee. Now the Intel card is recognized. I would prefer to run just the nvidia card as in Ubuntu 11.10 but for now this is better than nothing. Does anybody else have the same problem?

    Read the article

  • Resolution stuck in 640x480 in grub, 11.04 and 12.04

    - by user89797
    I have three operating systems on my machine, Windows 7x64, Ubuntu 11.10 and 12.04 both x64 as well. All three were running at full resolution for my monitor, as well as in the Grub 1.99 boot screen. After booting into Windows, I rebooted my machine and found my Grub resolution was suddenly 640x480. Booting into both versions of Ubuntu, I find myself stuck at that resolution as well. I made no driver changes recently, and hadn't even booted into the 11.10 build in a month or more. I've gone through both proprietary Nvidia driver options for my card (GeForce 9800GT) as well as the open source drivers in 12.04 to no avail. I can't figure out what could have caused this change in both versions of Ubuntu and Grub simultaneously. Windows 7 is unaffected so I think that safely rules out hardware failure. EDIT Ok, so I couldn't boot an graphical live disks, I tried ubuntu 12.04 i386 and x64 as well as 12.10 beta x64 and all of them would flash the initial logo, go to a blank screen with a flashing cursor in the upper left and then my display would die. I managed to boot 12.04 server and get into recovery. I reinstalled grub and went into recovery mode for my 12.04 build. If I boot in safe graphics mode I can get 1280x768, but as soon as I reboot it's broken again. I've tried reinstalling the nvidia drivers and that leaves me with a system stuck at max 640x480. None of these changes have had any impact on the 11.10 build, which is still stuck at 640x480 Given that I can push a somewhat higher resolution in 12.04, and full resolution in windows 7 I'm pretty convinced it's not an issue of my monitor failing. It must be something to do with the graphics drivers. I can't figure out what could be the issue though. I'm especially perplexed that I can't boot any live images

    Read the article

  • Ubuntu 12.04 nomodeset fixes boot problem but causes screen resolution to get stuck

    - by Thunder
    I've been searching the askubuntu forum for the past 3 days trying to figure out what's going on with my system and I have tried a lot of things but to no avail. So, I will explain my situation and tell you what I have tried and I hope someone can help me :) I have an: HP Workstation xw4100 Pentium(R) 4 3.00 GHz 1.5 GB RAM NVIDIA Quadro4 380 XGL graphics card It came with Windows XP and I set it up (with WUBI) to dual boot with Ubuntu 12.04 After installation I had the problem that so many people had with it booting to a black screen (mine was actually booting to the terminal basic shell) that is fixed by adding nomodeset into the grub. When I do that, MY screen resolution becomes stuck in 1280x768 (as opposed to 1366x768 before adding nomodeset) (and also, when running XP the best resolution is 1280x720) When I go to "additional drivers" it doesn't show any proprietary drivers, so I manually downloaded them using this command: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current but after rebooting, that made the graphics even worse (now stuck as 800x600) SO I tried to configure the drivers with sudo nvidia-xconfig but that simply created an empty xorg.config file. I found one place where a guy gave information to manually input into the xorg.config file but that had no effect at all. Lastly I tried to install previous versions of the NVIDIA drivers, but they wouldn't even fully install. So now I have just re-installed Ubuntu 12.04 and I either need to find a better solution to the first problem (nomodeset) or get the nouveau driver to correctly configure to work with my nvidia graphics. Thanks for your help ahead of time!

    Read the article

  • Dual monitors, screen resolution, xorg.conf.d

    - by Flase
    I do a lot of RTFM but this one has got me stuck. I have Ubuntu Studio 12.04 Precise Pangolin with XFCE as its default desktop. My old HIS ATI Radeon 9250 graphics card was adding red crud across the screen with the generic driver, but downloading the proprietary "fglrx" driver makes it work cleanly. The trouble is the Catalyst control centre refuses to recognise my old card so I must do some manual configuring to make sure both the DVI and VGA monitors are capable of the correct screen resolution (both 1280x1024) and a dual display. It used to be easier to just edit the existing xorg.conf file and add another resolution and so forth, but now there are automatic xorg.conf.d directories (more than one) with scant documentation. Creating a generic xorg.conf with a terminal command creates every setting imaginable. What I want to do is create the simplest conf file which just tells the system the following: My VGA monitor can do 1280x1024 60Hz The two monitors together may be 2560x1024 width The VGA monitor on the right I might need to specify Xinerama if it's needed Thank you. I don't think I need to bore you with log files, but please ask for further info. Mike

    Read the article

  • Boot ubuntu 12.04 in 3D - nomodeset quiet splash install

    - by rahi
    I would like to enable 3D in Ubuntu 12.04. I recently tried to install ubuntu on a new computer. When the installation was complete and I rebooted the machine, I could only see a blank screen. After some searching, I followed this tutorial which instructed me to boot with "nomodeset" enabled. I choose this on the USB I was installing ubuntu 12.04 from. Fortunately, the ubuntu installation on the new computer was successful. When I tried to change the size of the unity launcher icons, I did not see that option (as I see on my other computer running ubuntu 12.04). I tried installing MyUnity and it told me that the computer I had just installed 12.04 to was running in 2D. To my knowledge. all the software is up to date (as I ran the Software Updater). In addition, when I look for Additional Drivers, I see a message that says "No proprietary drivers are in use on this system". When I look under System Details Graphics, I see the Driver as "VESA:Intel Sandybridge/Ivybridge Graphics. When I hold the shift key on when my machine boots up, and type "e" on the Grub menu, I see the following towards the end, "nomodeset quiet splash $vt_handoff". Does this have anything to do with the plain 2D ubuntu 12.04 experience? Again, what I'd like to do now is get the 3D experience on my new machine running 12.04. Please let me know if you need more information.

    Read the article

  • Dual monitors with one above the other?

    - by Felix
    I'm using Gnome 3 and proprietary Nvidia drivers. I have tried to set in nvidia-settings my external monitor to be "above" my main one (it's a laptop). However, when I try to drag a window up from the main display to the external one, it gets stuck and can't move past a certain point. Trying to maximize it changes its decoration so it looks maximized (i.e. no borders, etc), but its size or position doesn't change. Now, if I set my external monitor to be "to the left" of the main one, it works, which is why I'm suspecting this is a Gnome issue, not an Nvidia one. Anyone know how to fix this? Update: some versions: Gnome: 3.2.2.1 Nvidia: 280.13 Update 2: I can see that Gnome 3.4 is out, and among the release notes is better external monitor support. However, they only mention a small fix that is unrelated to my problem. Can anyone with Gnome 3.4 and access to an external monitor please test this out and tell me if it works? I don't want to go through the hassle of upgrading my Ubuntu installation unless I know for certain it's going to fix the problem.

    Read the article

  • Cursor seems to freeze in the first attempt of typing - Unity 3D, 12.04

    - by Denis
    It happens in the first attempt of typing, no matter is after the startup, or 5 minutes later, or then after. The cursor (or maybe it's the system) seems to freeze, no matter the application I use, taking up 5 sec to appear what is typed. Subsequently, everything is normal, using another applications. @Anwar Shah suggested it could be a daemon waiting to run before the lauching of the first application. Turning off Zeitgest didn't help. It occurs only with Unity-3d. Tested with Unity-2d, everything is fine. Tried to change some Compiz settings, nothing worked, although not tested with every single parameter. Also I deactivated Ati proprietary driver, no effect. My system: AMD E350 1.6Gh, 2G-Ram, ATI graphics - Ubuntu 12.04, 64bits. Update 1: the cursor is blinking normally before I start typing. After the first character (which is not showed), seems to freeze, taking 5 seconds to get normal again. Very annoying, specially when you want to access login sites. Update 2: I tested on a different and old machine (Athlon 64 4800 x2, 4Gb ram, no problems - takes 2 seconds, acceptable. I think it could be related to my specific hardware (Samsung RV415), but not sure about it. Anyone experiencing something similar? Is that what I should expect, or can be fixed or improved? Thanks.

    Read the article

  • Cannot enable Additional drivers for Broadcom in 12.10

    - by Compt
    tl;dr version: Additional Drivers does not work for enabling a driver in Ubuntu 12.10, however it worked in 12.04. I upgraded to Ubuntu 12.10 from 12.04 via a live USB. I did a fresh install to avoid any conflicts. From 12.04 I know that my wireless card has proprietary drivers that could be installed via Additional Drivers. I did eventually find additional drivers in the software sources menu, however when I attempt to switch to Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source, it not only does not work, it in fact disables my wireless completely. The only way to revert this is to restart, and revert back to "do not use the device". Then upon another restart, my wireless will function once again. I was curious if anyone else had this issue, and if there was a fix for it as of yet. I looked on launchpad and it may be a potential bug, but I am unsure. Any help would be greatly appreciated (and sorry for that wall of text). Until then, I'll continue to use my wireless as it is (or revert to 12.04), but I do notice a slower connection without it enabled.

    Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >