Search Results

Search found 2327 results on 94 pages for 'signal strength'.

Page 23/94 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

• Wireless Repeating with Netgear N750 (WNDR4300)

  - by jomo1911

  I have a Netgear N750 as my main router, which connects to the internet via a modem. I have a second Netgear N750 which I want to use to repeat the wireless signal of the main router. I logged in to routerlogin of my main router (192.168.1.1) and set up the "Wireless Repeating Function". I set it as the "Wireless Base Station" and filled in the MAC adress of my second Netgear N750. Then I logged in to routerlogn of my second router and set it up as the "Wireless Repeater", I gave it the IP 192.168.1.11 and filled in the MAC adress of the base station. During the setup of the second router (Repeater) I had to disable all security functions. If I connect to the repeaters' WLAN signal, I get no internet connection. Maybe you can help me, thanks

  Read the article

• Windows Media Center says "Searching for tuners" when I try to play live TV

  - by Louis

  After upgrading from Windows 8 Pro with Media Center to the 8.1 preview, I need some help in being able to watch live TV again. When I try to now, it says Please Wait. Searching for tuners. I tried reinstalling the software for the Hauppauge WinTV DCR-2650 TV tuner, and upgrading the firmware for both the tuner and the Cisco STA-1520 tuning adapter. I also tried swapping around the USB ports, cold-booting the devices, and running the Set Up TV Signal setting in WMC, but that says The TV signal cannot be configured because a TV tuner was not detected. Both devices look fine in Device Manager, reporting the "This device is working properly" status. I'm not sure if this is related, but I did have some network connectivity issues immediately after upgrading to Windows 8.1 where my either my subnet mask or default gateway was missing, and since the TV tuner shows up as a network device, I wonder if that might be related. However, I really don't know how those settings should look and Hyper-V sort of further complicates things with the virtual Ethernet adapters:

  Read the article

• What is your best travel (portable) WiFi router?

  - by Sorin Sbarnea

  I'm looking for a small WiFi router that I could use to create my own wireless network when I travel. I'm also interested in a router that has very good signal/antenna and that is easy to take with you. Please do not recommend products just because you can find them on the net, I'm interested about personal experience. Also it's good to know if you can install open-source firmware on it. Selection criteria: size signal quality price Required: to support both 110V/220V power supply, best if embedded or retractable cord.

  Read the article

• Linux: close a program with command line (not kill it)

  - by CodeNoob

  Some applications only allow one running instance (like eclipse, if you want to use the same workspace). So if I log in from another location, I have to kill/close the application that was open when I previously logged in from another location. I always use kill command to kill the running process. But, if you kill a process, it might not save some states that are useful for future usage. However, if you "close" it properly byclicking on the close button, for example, it will save the states properly. Is there a way to properly "close" an application from command line? I know this can vary from applications, so let's be a bit more generic: how to send a signal to another running application, and this signal works just as if we click the "close" button in the top bar? thanks!

  Read the article

• Theoretical Wi-Fi decay

  - by lithiium

  Is there a way to (theoretically at least) calculate the decay on bandwith of a Wifi related to the streght signal? For example, I know that I can theoretically expect 54Mbps of a 802.11g at 100%, which will be the bandwith expected at a 30% of signal? is it lineal? is it the same? I could not find any source for this, but considering the error replay involved, I guess it should be possible to calculate something like this. Anybody knows?

  Read the article

• Xubuntu login hangs after Cancel Button click

  - by akester

  I'm running Xubuntu 12.04 (I installed using the alternative installer.) running in Virtaulbox 4.1.20 My issue is with the login screen (lightdm-gtk-greeter). It usually runs just fine, and allows users to log in and out but it will hang if the user presses the cancel button. The interface is still working (ie, shutdown menu is still available, I can switch to a different tty) but the username or password field (depending on when the button is hit) is disabled. Restarting lightdm will reset the screen, but the problem still exists. The issue is only with the cancel button. The login, session, and language buttons/menus as well as the accessibility and shutdown menu appear to work normally. I've modified some of the config files for lighdm-gtk-greeter, specifically /etc/lightdm/lighdm-gtk-greeter.conf to change the background image and /etc/lightdm/lightdm.conf to disable the user list. I did not check to see if the error existed before the changes took place. The changes have been restored the default settings but the problem persists. Here is the output of /var/log/lightdm/lightdm.log when the screen is hung: [+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log [+0.00s] DEBUG: Starting Light Display Manager 1.2.1, UID=0 PID=2072 [+0.00s] DEBUG: Loaded configuration from /etc/lightdm/lightdm.conf [+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager [+0.00s] DEBUG: Registered seat module xlocal [+0.00s] DEBUG: Registered seat module xremote [+0.00s] DEBUG: Adding default seat [+0.00s] DEBUG: Starting seat [+0.00s] DEBUG: Starting new display for greeter [+0.00s] DEBUG: Starting local X display [+0.02s] DEBUG: Using VT 7 [+0.02s] DEBUG: Activating VT 7 [+0.03s] DEBUG: Logging to /var/log/lightdm/x-0.log [+0.04s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+0.04s] DEBUG: Launching X Server [+0.05s] DEBUG: Launching process 2078: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch [+0.05s] DEBUG: Waiting for ready signal from X server :0 [+0.05s] DEBUG: Acquired bus name org.freedesktop.DisplayManager [+0.05s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0 [+0.28s] DEBUG: Got signal 10 from process 2078 [+0.28s] DEBUG: Got signal from X server :0 [+0.28s] DEBUG: Connecting to XServer :0 [+0.29s] DEBUG: Starting greeter [+0.29s] DEBUG: Started session 2082 with service 'lightdm', username 'lightdm' [+0.36s] DEBUG: Session 2082 authentication complete with return value 0: Success [+0.36s] DEBUG: Greeter authorized [+0.36s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log [+0.36s] DEBUG: Session 2082 running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/lightdm-gtk-greeter [+0.58s] DEBUG: Greeter connected version=1.2.1 [+0.58s] DEBUG: Greeter connected, display is ready [+0.58s] DEBUG: New display ready, switching to it [+0.58s] DEBUG: Activating VT 7 [+1.04s] DEBUG: Greeter start authentication for andrew [+1.04s] DEBUG: Started session 2137 with service 'lightdm', username 'andrew' [+1.09s] DEBUG: Session 2137 got 1 message(s) from PAM [+1.09s] DEBUG: Prompt greeter with 1 message(s) [+17.24s] DEBUG: Cancel authentication [+17.24s] DEBUG: Session 2137: Sending SIGTERM

  Read the article

• Wireless Repeating with two Netgear N750 (WNDR4300)

  - by jomo1911

  I have a Netgear N750 as my main router, which connects to the internet via a modem. I have a second Netgear N750 which I want to use to repeat the wireless signal of the main router. I logged in to routerlogin of my main router (192.168.1.1) and set up the "Wireless Repeating Function". I set it as the "Wireless Base Station" and filled in the MAC adress of my second Netgear N750. Then I logged in to routerlogin of my second router and set it up as the "Wireless Repeater", I gave it the IP 192.168.1.11 and filled in the MAC adress of the base station. During the setup of the second router (Repeater) I had to disable all security functions. If I connect to the repeaters' WLAN signal, I get no internet connection. Maybe you can help me, thanks

  Read the article

• Is it possible to run bash builtin from non bash script?

  - by tig

  Is it possible to run for example history -w for underlying bash shell from ruby script? Or better is it possible to run builtin command for bash shell knowing only its pid? The only way I found is to trap signal like trap "history -w" SIGUSR1 and then send signal to process, but I am not sure that it is a good practice and USR1 is not used by bash, also this way I can execute max 2 commands (USR1 and USR2). And I have to define trap before using it. I am on Mac so there is not SIGRTMIN..SIGRTMAX.

  Read the article

• Give root password for maintenance

  - by Jevgeni Smirnov

  After entering shutdown now in terminal I get everything running normally and then: All processes ended withing 2 seconds...done INIT: Going single user INIT: Sending processes the TERM signal INIT: Sending processes the KILL signal Give root password for maintenance(or.... I press Ctrl+D, and it shows me login screen Debian. Shutdown through GUI works properly. UPDATE 1 It seems some process hangs. Moreover I'v managed to poweroff server through several retries. Recently i'v installed only ntp and ntpdate. Nothing more. I suppose it might be it conflicting with iptables.

  Read the article

• how to word wrap, align text like the output of man?

  - by cody

  what is the command that word wraps and justifies a text file so that the output looks like that of a man page: All of these system calls are used to wait for state changes in a child of the calling process, and obtain information about the child whose state has changed. A state change is considered to be: the child terminated; the child was stopped by a signal; or the child was resumed by a signal. In the case of a terminated child, performing a wait allows the system to release the resources associated with the child; if a wait is not performed, then the termi- nated child remains in a "zombie" state (see NOTES below). Thanks.

  Read the article

• Brand New MOnitor Won't Get Input From CPU

  - by HollerTrain

  I have an old Dell 2350. I found a HD a few months ago and plugged it in and it booted up. So I just purchased a monitor and plugged it in, and put the HD inside and connected the two connections (Bus, and a four pronged connector) and no signal is being sent to monitor. is this a monitor issue or the HD is just dead? HD is spinning. CPU is turned on :) Yet no signal.. any thoughts?

  Read the article

• Do all the network cards use the same frequency to send signals to wire?

  - by smwikipedia

  I am comparing my cable TV wire to my network wire. In a TV cable wire, different frequencies are used by different TV channels. And since a certain channel use a fixed frequency, I think the only left way to represent different signal is with the carrier wave's amplitude. But what about the network wire? For all the network cards with the same type, do they also use different frequencies to send signals just like TV cable? I vaguely remember that they use frequency adjustment to represent signals. So the frequency should not be a fixed one. So how did all the network cards that sharing the same medium differentiate their own signal from others?

  Read the article

• How do I get 480i resolution for an external monitor in Windows 7?

  - by Carson Myers

  I'm trying to get a laptop video signal to my really old television, so that I can play movies on it. But the TV won't accept the video signal. I found the manual online, and apparently the output has to be 480i. But I don't know how to do that -- Windows 7 will only let me set the resolution down to 800x600. Even if I get it down to 640x480- is that 480i or 480p? How do I tell the difference? How do I switch between them? How do I get the resolution down so low in the first place?

  Read the article

• unable to install anything on ubuntu 9.10 with aptitude

  - by Srisa

  Hello, Earlier i could install software by using the 'sudo aptitude install ' command. Today when i tried to install rkhunter i am getting errors. It is not just rkhunter, i am not able to install anything. Here is the text output: user@server:~$ sudo aptitude install rkhunter ................ ................ 20% [3 rkhunter 947/271kB 0%] Get:4 http://archive.ubuntu.com karmic/universe unhide 20080519-4 [832kB] 40% [4 unhide 2955/832kB 0%] 100% [Working] Fetched 1394kB in 1s (825kB/s) Preconfiguring packages ... Selecting previously deselected package lsof. (Reading database ... ................ (Reading database ... 95% (Reading database ... 100% (Reading database ... 20076 files and directories currently installed.) Unpacking lsof (from .../lsof_4.81.dfsg.1-1_amd64.deb) ... dpkg: error processing /var/cache/apt/archives/lsof_4.81.dfsg.1-1_amd64.deb (--unpack): unable to create `/usr/bin/lsof.dpkg-new' (while processing `./usr/bin/lsof'): Permission denied dpkg-deb: subprocess paste killed by signal (Broken pipe) Selecting previously deselected package libmd5-perl. Unpacking libmd5-perl (from .../libmd5-perl_2.03-1_all.deb) ... Selecting previously deselected package rkhunter. Unpacking rkhunter (from .../rkhunter_1.3.4-5_all.deb) ... dpkg: error processing /var/cache/apt/archives/rkhunter_1.3.4-5_all.deb (--unpack): unable to create `/usr/bin/rkhunter.dpkg-new' (while processing `./usr/bin/rkhunter'): Permission denied dpkg-deb: subprocess paste killed by signal (Broken pipe) Selecting previously deselected package unhide. Unpacking unhide (from .../unhide_20080519-4_amd64.deb) ... dpkg: error processing /var/cache/apt/archives/unhide_20080519-4_amd64.deb (--unpack): unable to create `/usr/sbin/unhide-posix.dpkg-new' (while processing `./usr/sbin/unhide-posix'): Permission denied dpkg-deb: subprocess paste killed by signal (Broken pipe) Processing triggers for man-db ... Errors were encountered while processing: /var/cache/apt/archives/lsof_4.81.dfsg.1-1_amd64.deb /var/cache/apt/archives/rkhunter_1.3.4-5_all.deb /var/cache/apt/archives/unhide_20080519-4_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up libmd5-perl (2.03-1) ... Building dependency tree... 0% Building dependency tree... 50% Building dependency tree... 50% Building dependency tree Reading state information... 0% ........... .................... I have removed some lines to reduce the text. All the error messages are in here though. My experience with linux is limited and i am not sure what the problem is or how it is to be resolved. Thanks.

  Read the article

• Installing mod_xsendfile on MAMP

  - by mail4alberto

  Hello, I'm having trouble installing mod_xsendfile on MAMP. I've used some sources to try to help me install it: http://iprog.com/posting/2008/04/compiling_mod_xsendfile_for_mac_os_x http://groups.google.com/group/phusion-passenger/browse_thread/thread/e6dac9d5ea0de9c1 I ended up installing apache20 via macports and used apsx command to create the module and then copy it into MAMP's modules folder. I was able to seem to load the module at least. But then I get this error in my apache logs: [Thu May 27 19:08:28 2010] [notice] child pid 68606 exit signal Bus error (10) [Thu May 27 19:08:41 2010] [notice] child pid 68607 exit signal Bus error (10) Can anyone help me out? :S

  Read the article

• Why can't connect with second computer in same LAN and settings?

  - by user930450

  I'm trying to connect to WLAN with notebook. The notebook works fine with other WLANs. It can authenticate, signal is "very good" but it says "can't access internet". (On Windows it's small yellow exclamation mark on the signal). With other computer exactly in the same location, with the same settings, it's possible to connect. Both are configurated to get IP dynamically. One difference is that the other computer is using "Ralink wireless" instead normal windows client to connect. But does this make a difference? the settings are the same. What could be the reason?

  Read the article

• Brand New Monitor Won't Get Input From Computer

  - by HollerTrain

  I have an old Dell 2350. I found a HD a few months ago and plugged it in and it booted up. So I just purchased a monitor and plugged it in, and put the HD inside and connected the two connections (Bus, and a four pronged connector) and no signal is being sent to monitor. is this a monitor issue or the HD is just dead? HD is spinning. CPU is turned on :) Yet no signal.. any thoughts?

  Read the article

• HP Z210 SFF: two different video cards produce no Displayport output when installed

  - by ConcernedOfTunbridgeWells

  I have a HP Z210 SFF that I'm trying to install a video card into. I've tried two different cards in Slot 2 (a Quadro FX380LP and a Quadro 600). Neither of these cards produce a displayport signal when installed. With neither installed the displayport port on the motherboard works fine with the built in graphics. When I install the cards it produces no signal and the cards don't either. The Quadro 600 is brand new and the odds of having two dead video cards is quite low. Is there something fundamental that I could be missing out - a BIOS setting maybe?

  Read the article

• How to programmatically control slave computer on BIOS level?

  - by PovilasSid

  I want to run some test on hardware level. My goal is to create or find a way to control one computer from another down to BIOS settings changing. For example: Master computer sends a signal for slave to restart and opens BIOS settings dialog. Master computer sends a signal to slave to change BIOS parameters and then restart. Then slave fully boots up master starts up some software on slave. Then software finishes operations cycle continues till certain conditions are met. I know that I am looking for a complex thing but mainly what I need are correct keywords because now I am being flooded by BIOS configurations tutorials. Main concerns: Is it possible without using any custom tailer chip? How can master monitor salve`s hardware activity? How to let master handled more than one slave? How what connections are needed to create this kind of setup? (cables)

  Read the article

• Is it possible to make Ctrl+C as responsive as Ctrl+Break in the Windows 7 console?

  - by Peter Graham

  Is it possible to make Ctrl+C act like Ctrl+Break in the Windows 7 cmd.exe console? By default Ctrl+C seems to only send a signal the next time the input buffer is read, where Ctrl+Break sends a signal immediately. This makes Ctrl+C useless for ending processes because when I want to end a process I want to end it immediately. I'm using Ctrl+Break for now but it's far harder to type. It looks like in DOS you can add BREAK=ON to CONFIG.SYS to achieve this, but not in Windows 7?

  Read the article

• No break compatible with Linux box?

  - by Somebody still uses you MS-DOS

  I'm buying this unit from deal extreme: it's a bitorrent downloader, with NAS capability. I'm interested in sharing an external HD in it, with media and backup purposes. I'm afraid of energy problems (don't know if this is the correct term), corrupting my mounted drives (like after a storm), so I thought about buying a No Break that sends a "signal" to my Linux box, and a script in my Linux box would unmout everything to avoid problems. Do this "No Break signal" feature exists? Do you have model suggestions? Thanks!

  Read the article

• Random Server shutdown? - CentOS

  - by Kevin Hammett

  My system was working fine, and then it just had a random restart. Anyone have any idea of the problem? The message log: Jul 6 22:56:34 909I7 shutdown[719711]: shutting down for system halt Jul 6 22:56:34 909I7 init: Switching to runlevel: 0 Jul 6 22:56:35 909I7 smartd[10743]: smartd received signal 15: Terminated Jul 6 22:56:35 909I7 smartd[10743]: smartd is exiting (exit status 0) Jul 6 22:56:42 909I7 hcid[8749]: Got disconnected from the system message bus Jul 6 22:56:42 909I7 auditd[8430]: The audit daemon is exiting. Jul 6 22:56:42 909I7 kernel: audit(1341640602.922:344412): audit_pid=0 old=8430 by auid$ Jul 6 22:56:43 909I7 pcscd: pcscdaemon.c:572:signal_trap() Preparing for suicide Jul 6 22:56:43 909I7 pcscd: hotplug_libusb.c:376:HPRescanUsbBus() Hotplug stopped Jul 6 22:56:44 909I7 pcscd: readerfactory.c:1379:RFCleanupReaders() entering cleaning f$ Jul 6 22:56:44 909I7 pcscd: pcscdaemon.c:532:at_exit() cleaning /var/run Jul 6 22:56:44 909I7 kernel: Kernel logging (proc) stopped. Jul 6 22:56:44 909I7 kernel: Kernel log daemon terminating. Jul 6 22:56:45 909I7 exiting on signal 15

  Read the article

• Extend university wifi network [migrated]

  - by asfasdoiuh ouhouhouh

  i live in a university campus and i can get wifi signal on the outside of my window but not in the house. The solution i use at the moment is a usb wifi dongle outside connected to my laptop but the lack of an internal antenna make the connection quite unreliable at times. So i was trying to find another solution to improve the reception of my network. One idea is to setup a router on the outside (in a place with stronger signal) and redirect the connection inside the house with an ethernet cable but the problem is that our Uni Wifi is managed by a capitve portal (BlueSocket with DNS redirection to login page) and the authentication has to happen on the mac address that connect to the net (so the client appliance in this case). If I use a router with Mac-Clone capability i will be able to be redirected trough the captive portal on my laptop computer and login from there or i need to setup my router to fill in the login page by itself? There are other hardware/software solutions i can use to get what i want? Thank you all

  Read the article

• How can I connect a DVI monitor to the VGA port in my laptop?

  - by Corey

  Is there a device I can buy that will convert the analog signal to digital?

  Read the article

• Win XP cannot connect (or see) my wifi network, but can see others

  - by Jorre

  since yesterday I have a strange wifi problem with my pc. I have a wireless linksys router setup that worked fine for many months, now since yesterday my pc won't connect to the wifi signal anymore. The strange thing is, my macbook pro still connects fine. SSID is broadcasting, but my windows XP doens't see it, I have all signal modes set to "auto". Windows XP sees all my neighbours wifi networks, so the wifi card isn't broken or anything. Any idea what can be wrong here?

  Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >