Search Results

Search found 7501 results on 301 pages for 'usb stick'.

Page 23/301 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

  • Running a VM off a USB 2.0 Flash Drive - Mac/Parallels/XP

    - by geerlingguy
    I use a MacBook Air as my primary machine, and the 128GB SSD means space is precious. To save about 10 GB, I've been running Parallels with a Windows XP VM off an external USB hard drive, which performs as well in everyday use as running the VM off the internal SSD. So, I bought a tiny 32GB USB 2.0 flash drive, plugged it into the MacBook Air, formatted it first as ExFAT (which was slow), then as Mac OS Extended (Journaled) (which was also slow), and copied over my VM file, and ran Parallels off it. My full experience is documented here: http://www.midwesternmac.com/blogs/jeff-geerling/running-windows-xp-vm Straight file copies are really fast — 30 MB/sec read (solid the whole time), and 10-11 MB/sec write (solid the whole time). But I noticed that once XP started running, the disk access rates were in the low KB ranges. Are USB flash drives really that poor at random access, or could I possibly be missing something (the format of the flash drive, etc.?)? Of note, I've tried the following, to no great effect: Formatting the drive as either ExFAT or Mac OS Extended (Journaled) Unplugging all other USB devices and turning off Bluetooth (which runs on the right-side-port USB bus). Plugging in the flash drive either direct in the right side port, or the left side port, or into a USB 2.0 hub

    Read the article

  • External USB HD with -optional- mains?

    - by Stephen
    Hi, I'm Christmas-present-buying, and I'd appreciate recommendations for a USB HD with an optional mains power input. I've hunted, but can't find all the information I want (partially due to sketchy product specifications). Background: This is for a digital TV which I do not own, and so I'd like to get it correct first time. The TV has a USB port to allow recording straight to disk, but the manuals don't say how much power can be drawn through the USB port. The manual's instructions state, possibly generically, to plug the drive in before connecting to the TV. Ideally I'd like a small (2.5"?) drive which can draw power over USB, with an mains power input if it turns out the USB port on the TV doesn't offer enough juice. The ideal is to use one cable, two max. A powered USB hub would introduce too much clutter. I've spotted that the LaCie Petit drives have what appears to be an additional power input, but I'm not even sure from the specs what that is. And the device doesn't ship with a mains adapter. Suggestions?

    Read the article

  • Windows 7 x64 RTM USB Port Has Power But Won't Recognize Mouse/Keyboard/Anything

    - by ben
    I have an odd error that doesn't seem to fit in with any of the other odd Windows 7 x64 USB errors that have been kicked up on Google. Here we go: Uninstalled Tortoise SVN and clicked restart computer. My machine had been up for around 28 days On reboot my mouse and keyboard failed to work anymore, couldn't log in. Tried every USB port I have on my Dell 390 and the ports on my Dell 19's, nothing worked. They had power but Windows would not respond when I manipulated the keyboard/mouse. Rebooted my computer and pressed F2 to get into bios, my keyboard is working fine in bios. Keyboard and mouse work fine on other computers when using USB. Found adapters for keyboard and mouse to convert from USB to PS/2 ports, works fine. I'm actually typing this question on the same keyboard, same computer, just using PS/2 ports for my mouse and keyboard. It appears to be a Windows 7 x64 issue. Other things I have tried: Multiple other mice and keyboards, iphone, all with no luck. Each one gets power, but Windows never tries to install drivers or sees that they are connected. Uninstall and reinstall all USB drivers. Drives uninstall and reinstall fine and report no errors in Control Panel. In Power Management I disallow Windows from turning off USB ports to save power Installed the latest nVidia drivers for my graphics card, no change. Anyplace else I can look/try? Thanks!

    Read the article

  • USB drive was bootable, but no longer boots

    - by i-g
    I'm trying to install a new OS onto a computer from a bootable USB stick. I previously installed Ubuntu Linux and it was a piece of cake -- I downloaded the ISO image, used UNetbootin to copy it to the USB drive and make it bootable, and that was that. Now, however, no matter what I try, I can't make the same USB drive bootable again! I've tried formatting it as FAT32 and NTFS. I've tried several different Linux distributions and Windows 7. I've tried using UNetbootin, Windows 7 USB Download Tool, WinToFlash, and manually making it bootable with diskpart/bootsect/bootrec. (Yes, I've tried bootsect /nt60 x: /force.) None of this seems to be working! When I try to boot from the drive, the machine reads from it (I can see the drive's LED blinking) and then gives me the same "Insert system disk and press Enter" message. (I've disabled booting from the hard drive.) Am I missing something I need to do to make the USB drive bootable again? I think it lost some pixie dust when I formatted it with the standard Windows formatting tool (it was quicker than deleting files), but I have no idea what it was or how to get it back. The USB drive in question is a SanDisk Cruzer 8GB SDCZ6. The computer I'm working on is running Windows Vista SP1.

    Read the article

  • USB drive was bootable, but no longer isn't

    - by i-g
    I'm trying to install a new OS onto a computer from a bootable USB stick. I previously installed Ubuntu Linux and it was a piece of cake -- I downloaded the ISO image, used UNetbootin to copy it to the USB drive and make it bootable, and that was that. Now, however, no matter what I try, I can't make the same USB drive bootable again! I've tried formatting it as FAT32 and NTFS. I've tried several different Linux distributions and Windows 7. I've tried using UNetbootin, Windows 7 USB Download Tool, WinToFlash, and manually making it bootable with diskpart/bootsect/bootrec. (Yes, I've tried bootsect /nt60 x: /force.) None of this seems to be working! When I try to boot from the drive, the machine reads from it (I can see the drive's LED blinking) and then gives me the same "Insert system disk and press Enter" message. (I've disabled booting from the hard drive.) Am I missing something I need to do to make the USB drive bootable again? The USB drive in question is a SanDisk Cruzer 8GB SDCZ6. The computer I'm working on is running Windows Vista SP1.

    Read the article

  • Is my "Generic" USB Flash Drive broken?

    - by Jesse J.
    So here is the situation. I find myself technological knowledgeable about many things ( I love to code, whether it's websites, C#, C++ or so on). However: My 2 toddlers (my wife actually) bought me a "Generic" 128 GB USB Storage Device (Usb Flash Drive) for Father's Day. I thought awesome at first..... WRONG! Nothing but problems with it. 3-4mb/s MAX transfer speed. I can bear with it. BUT! When I went to reformat my computer I transferred my save files from my games over to the stick and then the USB Stick managed to become corrupted. Not just a simple format would work either. It's screwed. I tried to use (Manually changed usb drive letter troubleshooting it to X) "chmod X: /X /F /R" with administrator rights, I did this after a long session to make it work with no errors (had to delete the log) and I finally recovered the files, however when I go to use it (transfer to or from) it transfers a couple kb to the stick or from it and then freezes, It says (Windows 7): Name: From: Folder (X:\File\Location) To: Folder C:\Users\Username\Desktop) Items Remaining: 0 (0 bytes) Speed: 0 bytes/second It does this forever... and ever... and ever... It transfered 3 files atleast, and then stopped. This is a new USB Stick bought from a "High" reputation company on eBay. Is the USB Stick screwed?

    Read the article

  • Should I install ubuntu on USB instead of HDD dual-boot?

    - by user2147243
    I had Ubuntu 12.04 installed as dual-boot OS on top of Vista on my laptop. Hacked the grub settings to default to Vista (instead of the default Ubuntu -- pain) on startup, and all was OK for occasional Ubuntu use for past 6 months. Then last week I got a strange message about 'lack of disk space' (~50MB free) when installing pxyplot, even though there was still about 6GB free disk space when I checked later. Then today the Ubuntu wouldn't load at all, and checking the HDD partitions in Vista it looked like the 15GB Ubuntu partition was now three smaller partitions! So, I got rid of those partitions and expanded the Vista partition to use the reclaimed space. Now can't restart ('grub rescue' appears and doesn't 'rescue' anything), so I'll have to do a boot recovery using a Vista installation CD. (Not a particularly user-friendly failure mode of the dual-boot installation!) I now have to decide to either a) try installing ubuntu on the HDD again, but don't want to stuff up my Vista ever again, as that is my most used OS, or b) install Ubuntu on a 16GB USB 3.0 stick. Apparently performance from USB won't be as good as from HDD, and running OS from USB stick does lots of r/w so the stick may fail after a few years! Perhaps installing Ubuntu on live USB and setup to then run in RAM would alleviate the performance/USB lifespan problems? If I create a live-USB for Ubuntu OS, will it boot off that when I restart the laptop with it plugged in? Or will I have to change the laptop setting for boot-order whenever I want to boot Ubuntu instead of Vista (that would be even more painful than the grub default boot order putting Ubuntu ahead of the existing Vista OS!) -- update: I recovered my Vista setup using Iolo SystemMechanic Disaster Recovery Tool, and created a bootable USB of Ubuntu 13.10 on an 8GB USB3.0 pendrive, with 4GB of 'persistence' to allow saving of settings, install some packages etc. It worked OK for a couple of test boots, but once I changed the time and desktop wallpaper, the next Ubuntu reboot crashed and I then couldn't get it to boot successfully. So I decided to install Ubuntu 12.04 LTS as a dual-boot again, but this time instead of partitioning the HDD and installing from an ISO DVD I used the wubi.exe tool to install Ubuntu as a dual-boot. Worked very well, although one oddity was that, despite asking how big the make the partition (20GB), the installed Ubuntu appears to be happily installed somewhere within the Vista NTFS file system (no partition shows up in Windows disk manager, and in Ubuntu disk management tool the entire 133 GB of HDD is showing, with ~40GB free space). A nice feature of installing the dual-boot using wubi is that the laptop now uses Windows boot manager on startup, with Vista as the default OS and Ubuntu happily listed as second on the list. So far so good.

    Read the article

  • How to create an "hybrid" usb stick?

    - by rdesign
    Hey guys, I was wondering how to make an hybrid usb stick. That means a usb stick that runs under mac and windows and displays specific content. Example: Plug in on win : index.html opens. Mac os X files are invisible. Plug in on mac: indexMac.html opens. Win files are invisible. I know that every usb stick can be read by both platforms. The Apple Mac os X CD is something which inspired me. thanks a lot.

    Read the article

  • mp3 player a8706 not detected as usb device

    - by Robert Buckmaster
    I've got a a8706 mp3 player. When I plug it in, it charges but doesn't mount. In XP mounting works perfectly fine. I'm using 11.10. What should I do? Thanks lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 007 Device 003: ID 0b97:7772 O2 Micro, Inc. OZ776 CCID Smartcard Reader Bus 002 Device 000: ID 1e74:4641 Coby Electronics Corporation

    Read the article

  • EnOcean -> USB Serial Communication (C++)

    - by regorianer
    I guess it is not the right place to ask here for enocean specific details, but maybe I am doing something wrong by using serial connections and you can help me no matter if there is knowledge about this technology or not. I have a problem to communicate with the RCM152 Module. I have written a C++ program to communicate with the RCM152 by emulating packets of the PTM 200. I teach the RCM152 to listen to the following packets: [06/19/12 04:21:44.546] INFO: SENDING BYTE : 55 <-- start byte [06/19/12 04:21:44.546] INFO: SENDING BYTE : 00 <-- head begin [06/19/12 04:21:44.546] INFO: SENDING BYTE : 07 [06/19/12 04:21:44.546] INFO: SENDING BYTE : 07 [06/19/12 04:21:44.546] INFO: SENDING BYTE : 01 <-- head end [06/19/12 04:21:44.546] INFO: SENDING BYTE : 7a <-- CRC Check [06/19/12 04:21:44.546] INFO: SENDING BYTE : f6 <-- packet type [06/19/12 04:21:44.546] INFO: SENDING BYTE : 20 <-- My action (00 and 10 -> OFF, 20 and 30 -> ON) [06/19/12 04:21:44.546] INFO: SENDING BYTE : 00 <-- serial.byte 3 [06/19/12 04:21:44.546] INFO: SENDING BYTE : 24 <-- serial.byte 2 [06/19/12 04:21:44.546] INFO: SENDING BYTE : 21 <-- serial.byte 1 [06/19/12 04:21:44.546] INFO: SENDING BYTE : 87 <-- serial.byte 0 [06/19/12 04:21:44.546] INFO: SENDING BYTE : 30 <-- status [06/19/12 04:21:44.546] INFO: SENDING BYTE : 03 <-- 03 for send, 01 for receiver [06/19/12 04:21:44.546] INFO: SENDING BYTE : ff <-- begin destination [06/19/12 04:21:44.546] INFO: SENDING BYTE : ff [06/19/12 04:21:44.546] INFO: SENDING BYTE : ff [06/19/12 04:21:44.546] INFO: SENDING BYTE : ff <-- end destination [06/19/12 04:21:44.546] INFO: SENDING BYTE : ff <-- Transmission quality (sender ff) [06/19/12 04:21:44.546] INFO: SENDING BYTE : 00 [06/19/12 04:21:44.547] INFO: SENDING BYTE : 10 <-- CRC Check A PTM200 Device or a SG-FUS-24-230 Device are sending equivalent packets like: [06/19/12 04:30:31.106] INFO: Received Byte: 55 [06/19/12 04:30:31.106] INFO: Received Byte: 00 [06/19/12 04:30:31.106] INFO: Received Byte: 07 [06/19/12 04:30:31.106] INFO: Received Byte: 07 [06/19/12 04:30:31.106] INFO: Received Byte: 01 [06/19/12 04:30:31.106] INFO: Received Byte: 7a [06/19/12 04:30:31.106] INFO: Received Byte: f6 [06/19/12 04:30:31.106] INFO: Received Byte: 40 [06/19/12 04:30:31.106] INFO: Received Byte: 00 [06/19/12 04:30:31.106] INFO: Received Byte: 24 [06/19/12 04:30:31.106] INFO: Received Byte: 6c [06/19/12 04:30:31.106] INFO: Received Byte: 2f [06/19/12 04:30:31.106] INFO: Received Byte: 30 [06/19/12 04:30:31.106] INFO: Received Byte: 01 [06/19/12 04:30:31.106] INFO: Received Byte: ff [06/19/12 04:30:31.106] INFO: Received Byte: ff [06/19/12 04:30:31.108] INFO: Received Byte: ff [06/19/12 04:30:31.108] INFO: Received Byte: ff [06/19/12 04:30:31.108] INFO: Received Byte: 37 [06/19/12 04:30:31.108] INFO: Received Byte: 00 [06/19/12 04:30:31.108] INFO: Received Byte: d1 I can control the device connected to the RCM152 like I want to with my sending packets (thats a good fact and means that the RCM152 has learned my packets and can use them. Also the actions (0x10 - ON, 0x30 - OFF) are working fine), but the problem is, that no matter which serial I choose, the RCM152 reacts to these packets. I only want to have actions if the teached-in serial is send and all other packets with different serials to be ignored. The RCM152 is not reacting to the packets sent by the PTM200 nor by the SG-FUS-24-230 because these are not teached-in. Thats exactly what I want to have with the packets created myself. What am I doing wrong? The libraries I am using are these for C++ http://pvbrowser.de/pvbrowser/sf/manual/rllib/html/ The enocean EEP says: For this purpose of a determined relationship between transmitter and receiver each transmitting device has a unique Sender-ID which is part of each radio telegram. The receiving device detects from the Sender-ID whether the device is known, i.e., was already learned, or unknown. A telegram with unknown Sender-ID is disregarded.

    Read the article

  • USB Device first mounted as root, then by user

    - by Petr Marek
    When I connect my Kindle, it shows up as an usb0 media, which I can read but not write (owner = root). However, if I do sudo umount /media/usb0, usb0 gets unmounted and a Kindle media gets mounted properly (is writable etc.). What can cause such strange behavior? It's not only with Kindle, but with Flash drives etc. as well. My /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda2 during installation UUID=595815c2-d882-4ec8-a2cd-cce70471167c / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda6 during installation #UUID=1340a336-66ca-4743-a6e4-41a307af2dda /boot ext4 defaults 0 3 # swap was on /dev/sda5 during installation UUID=afa49f1d-d505-4166-82a2-2f44548a48c6 none swap sw 0 0 UUID=deb86039-528a-45f3-b5f9-ce528740c94e /data_hdd ext4 defaults 0 2 My groups: petr@sova:~$ groups petr petr : petr adm cdrom sudo dip plugdev fuse lpadmin sambashare bumblebee

    Read the article

  • Canon MG6100 series USB Printer not mounting

    - by user35201
    Printer MP6150 driver installed itself upon plugging in the printer. Printer is recognized (lsusb shows it) but does not mount. If the printer is recognized, the driver must be working (or?), but something is blocking the system from mounting the printer. Tried the usual things: power of printer, restart Ubuntu etc. Listed below result of lsusb and fstab: hans@kontor-linux:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 04a9:174a Canon, Inc. Bus 002 Device 002: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser hans@kontor-linux:~$ sudo cat /etc/fstab [sudo] password for hans: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=eaf3b38d-1c81-4de9-98d4-3834d674ff6e / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=93a667d3-6132-45b5-ad51-1f8a46c5b437 none swap sw 0 0

    Read the article

  • Canon MG6100 series USB printer receives job but doesn't physically print

    - by Old-linux-fan
    Printer MP6150 driver installed itself upon plugging in the printer. Printer is recognized (lsusb shows it) but does not mount. If the printer is recognized, the driver must be working (or?), but something is blocking the system from mounting the printer. Tried the usual things: power of printer, restart Ubuntu etc. Listed below result of lsusb and fstab: hans@kontor-linux:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 04a9:174a Canon, Inc. Bus 002 Device 002: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser hans@kontor-linux:~$ sudo cat /etc/fstab [sudo] password for hans: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=eaf3b38d-1c81-4de9-98d4-3834d674ff6e / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=93a667d3-6132-45b5-ad51-1f8a46c5b437 none swap sw 0 0

    Read the article

  • USB file transfer preparing to copy, but file count climbs indefinitely

    - by Alex
    I have downloaded Ubuntu 12.04 to back up my Windows machine that won't boot and am running Ubuntu from the CD. I copied and pasted a volume of about 160GB to my external HDD. The transfer has been stuck in the "preparing to copy" stage for several hours and is displaying a file/GB count about twice as high as the volume of data actually being copied! The number is now larger than the entire partition that's being copied from! However I know it's doing something because occasionally it pops up with a minor I/O error on this or that file which I then have to click through. I've not had this problem before so I can only assume it's a Linux/Ubuntu thing. More importantly what I want to know is is there any other way to copy it across that will actually work?

    Read the article

  • Ubuntu on USB does not boot on MacBook

    - by Sean H
    Ubuntu is installed on a 32 gigabyte flash-drive and it successfully booted every time up until I partitioned my hard-drive and installed Windows as a secondary boot (for programming reasons). Now every time I attempt to boot the Ubuntu flash-drive it boots into Windows XP. The same goes for partitions, I partitioned my hard-drive and installed Ubuntu and it only booted Windows XP. I am on a MacBook 6,1 with Mac OS X 10.6.8, 2 partitions, and I am using ReFit as my boot-loader. EDIT: I had Ubuntu working fine from FLASH DRIVE and at one point as a partition. I later uninstalled Ubuntu from my hard-drive and installed Windows. I then had to re-image my computer for certain reasons and I installed windows. Now when I attempt to boot anything other than Windows or OS X it boots into windows. Ubuntu was never on my hard drive while Ubuntu was on it. The flash-drive has been its own thing and has the boot-loader installed to it and loads from ReFit but boots into windows.

    Read the article

  • USB and CD data cannot be read or mounted in 12.10

    - by aravind4j
    I'm using Ubuntu 12.10. I wrote a data disk using Brasero Disk Burner, but the system cannot read the CD. I tried to write the same data into my HP v220w pen drive but now there is an error in that too. It shows the following: Error mounting /dev/sdb at /media/aravind4j/Aravind4j: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdb" "/media/aravind4j/Aravind4j"' exited with non-zero exit status 13: $MFTMirr does not match $MFT (record 0). Failed to mount '/dev/sdb': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. (udisks-error-quark, 0) I used a NTFS file system for the pen drive as you can recognize from the above statement. I would like to recover the files so please help me recover the files without formatting the drive.

    Read the article

  • 12.04 backlight issue for Acer Aspire 5734z-4725 running on usb flash drive

    - by Shawn
    I have followed the fix found here: Backlight Issue However I can't use the sudo update-grub2 command as it errors with /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?). As this laptop's hard drive is shot, I can't install the OS. I have been able to get it to temporarily work with sudo setpci -s 00:02.0 F4.B=00. I'm new to Ubuntu, so if you know how to fix this please provided as much detail to what I would need to do.

    Read the article

  • Ubuntu doesn't "see" external USB Hard Disk

    - by Mina Michael
    It's NTFS. It's USB2. I'm using Ubuntu 13.04. It works perfectly fine on Windows (which excludes cable and hardware problems). I have two Ubuntu computers and it's not detected on either. It's about 500 GB. Edits: Following the first link, I input sudo lsusb in a terminal; before and after connecting the HDD. The difference was Bus 001 Device 012: ID 14cd:6116 Super Top M6116 SATA Bridge. There it is! ("sata bridge" used to appear in a windows notification when I plugged in the HDD in!). ...This means that Ubuntu detects it but is it not mounting it? I tried this: sudo mount /dev/sdb1 /mnt But gives this: mount: special device /dev/sdb1 does not exist I also tried: sudo mount /dev/sdc1 /mnt but it stays with no output forever. I left it in background for about 30 min.s. sudo fdisk -l gives out this: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa42d04a3 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility /dev/sda2 * 80325 102481919 51200797+ 7 HPFS/NTFS/exFAT /dev/sda3 263874558 312580095 24352769 5 Extended /dev/sda4 102481920 263872511 80695296 7 HPFS/NTFS/exFAT /dev/sda5 263874560 310505471 23315456 83 Linux /dev/sda6 310507520 312580095 1036288 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5822aaea Device Boot Start End Blocks Id System /dev/sdc1 2048 976769023 488383488 7 HPFS/NTFS/exFAT The part below "Partition table entries are not in disk order" takes about 5 minutes to appear. The outputs of ls /dev/ | grep sd before and after connecting the HDD: before: sda sda1 sda2 sda3 sda4 sda5 sda6 ,after: sda sda1 sda2 sda3 sda4 sda5 sda6 sdd sdd1 The second output has the lines sdd and sdd1 different from the first one. IT SHOWED THE FILES!! The command sudo mount /dev/sdd1 /mnt worked after I typed in sudo fdisk -l!!! Thanks a million!! :) :)

    Read the article

  • Ubuntu Server Installer does not detect usb device

    - by Peter
    For some time now I am struggling with the 12.04 Ubuntu Server installer. I am trying to execute a clean, CD based install with the mentioned version onto an SD card. For the sake of the simplicity I have taken out the HDD. However, I had to recognise that the "disk detection" phase simply can not find the SDCARD. It says "No disk drive was detected. If you know the name of the driver needed by your disk drive, you can select from the list." What is really strange that I have tried the older Ubuntu Server installer (11.04) and this is simply recognising the sdcard... Does anyone have any idea? Many thanks, Peter

    Read the article

  • Fixing USB drive auto-notify

    - by steevc
    Yesterday I was copying files from SD cards, but at some point they stopped auto-mounting. Didn't notice any errors. I can still mount by right-clicking the appropriate file in /dev in Konqueror. UPDATE: Slight correction. The drives never automounted, but I've stopped getting the notification that a drive is plugged in. What processes should I be checking? Something in Device Actions? I'm using Kubuntu 10.04

    Read the article

  • Leapfrog Crammer won't mount as a USB flash drive

    - by William
    I can't seem to get the Leapfrog Crammer study and sound system to show up as a flash drive under ubuntu so I can transfer stuff to it. I don't want to install the leapfrog bloatware, can someone help me with this? Additional Information: When I plug my crammer into my computer it shows a 1 MB file system with a link to download the crammer software. I want to know how to access the rest of the crammer's file system so I can transfer music to it. The crammer does not show any other partitions in natulius. According to an article on the internet, the crammed is divided into three partitions: One with a link to install the crammer software, one with all content(music, flash cards, etc.) and one for firmware. I want to know how to access the one with the content so I can add music to the player. Can anyone help me with this? Thanks in advance.

    Read the article

  • Creating a bootable USB drive from a distro split over two DVD ISOs

    - by Kev
    I am searching and not finding the right way to do this. Please note, I don't think I'm trying for anything strange here. I just want to make a bootable USB stick of a single OS that happens to be larger than one DVD and happens to be larger than FAT32 will allow for in a single file. On our slow connection I spent a long time downloading CentOS 5.9's two DVD ISOs: CentOS-5.9-x86_64-bin-DVD-1of2.iso (4.4 GB) CentOS-5.9-x86_64-bin-DVD-2of2.iso (718 MB) I have a USB stick that I want to somehow get these two ISOs on. Since the first one is 4.4 GB, I can't use ISO2USB because it insists on FAT32. I cannot find an alternative that lets you specify more than one ISO image--of the same distro, I'm not trying for some fancy multi-boot thing--to put on the same stick. I guess I should have downloaded the CD ISOs, but I thought I was "saving time" because then I wouldn't have as many files to run through the md5 checker. There's no IMG file of the whole thing (only a net install version, which I don't want--I want to pre-download everything) otherwise I would've gone for that. So, given that I have these two DVD ISOs, how can I get them on a stick that will boot and make use of both of them properly to install CentOS somewhere? Again, I don't think this is anything out of the ordinary, yet I can't find software/docs that seem to support this. Am I stuck re-downloading everything in CD-sized ISOs just to do this? I found this, but it doesn't run on Windows. I am using Windows to prepare the stick.

    Read the article

  • How to Completely delete my USB thumbstick?

    - by Roi
    I own a Kingston thumb-stick. I have installed a Google Chrome OS image to it so I could try it out. When it did so, it created 3 partitions (I backed everything and the software that installed Chrome OS delete my thumb-stick completely and created 3 partitions). Now I want to get it back to 1 partition but when I go to Disk Management, it will not let me "extend" the partition. I have tried different partitioning tools but they didn't recognize my thumb-stick anyway. I have also tried DiskPart to no avail. Is there any software that will completely format my thumb-stick so I would only have 1 partition?

    Read the article

  • Windows 7 boot from downloaded .iso

    - by Travis
    Downloaded Windows 7 .iso off the net and want to install from USB key on old laptop (previously/still running XP) that has no CD/DVD drive. Here's what I've got so far: Read the instructions in this post: http://kmwoley.com/blog/?p=345 , which were quite straight forward and clear. Properly formatted USB key with another laptop (this one running vista), also with no DVD drive wasn't sure how to make the USB bootable, since my .iso was downloaded and I have no DVD drive. Any help would be much appreciated!!

    Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >