Search Results

Search found 3947 results on 158 pages for 'vmware fusion'.

Page 23/158 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

• Why would VMWare to go defunct? How to recover from/prevent it?

  - by Josh

  I am running VMWare Server 2.0.2 (Build 203138) on a dual core Intel i5 with Ubuntu Server 10.04 LTS system (kernel 2.6.32-22-server #33-Ubuntu SMP). Disk Subsystem is a software RAID5 array. The system has been set up for a little over a week. For the past 5 days I have been running at leat 3 VMs (Linux and a variety of Windows OSes) with no issues whatsoever. But while I was installing Linux onto a new VM, suddenly all VMs became unresponsive, including the one I was installing to. I could not log in to the VMWare Management Interface, and the system was somewhat unresponsive via SSH. When I looked at top, I saw: top - 16:14:51 up 6 days, 1:49, 8 users, load average: 24.29, 24.33 17.54 Tasks: 203 total, 7 running, 195 sleeping, 0 stopped, 1 zombie Cpu(s): 0.2%us, 25.6%sy, 0.0%ni, 74.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 8056656k total, 5927580k used, 2129076k free, 20320k buffers Swap: 7811064k total, 240216k used, 7570848k free, 5045884k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 21549 root 39 19 0 0 0 Z 100 0.0 15:02.44 [vmware-vmx] <defunct> 2115 root 20 0 0 0 0 S 1 0.0 170:32.08 [vmware-rtc] 2231 root 21 1 1494m 126m 100m S 1 1.6 892:58.05 /usr/lib/vmware/bin/vmware-vmx -# product=2; 2280 jnet 20 0 19320 1164 800 R 0 0.0 30:04.55 top 12236 root 20 0 833m 41m 34m S 0 0.5 88:34.24 /usr/lib/vmware/bin/vmware-vmx -# product=2; 1 root 20 0 23704 1476 920 S 0 0.0 0:00.80 /sbin/init 2 root 20 0 0 0 0 S 0 0.0 0:00.01 [kthreadd] 3 root RT 0 0 0 0 S 0 0.0 0:00.00 [migration/0] 4 root 20 0 0 0 0 S 0 0.0 0:00.84 [ksoftirqd/0] 5 root RT 0 0 0 0 S 0 0.0 0:00.00 [watchdog/0] 6 root RT 0 0 0 0 S 0 0.0 0:00.00 [migration/1] The VMWare process for the virtual machine I was installing into became a zombie. Yet, it was still consuming 100% of the CPU time on one of the cores, and I couldn't reach it or any other virtual machines. (I was logged in to one virtual machine over SSH, another via X11, and a third via VNC. All three connections died). When I ran ps -ef and similar commands, I found that the defunct vmware-vmx process had it's parent PID set to init (1). I also used lsof -p 21549 and found that the defunct process had no open files. Yet it was using 100% of CPU time... I was unable to kill any vmware-vmx processes, including the defunct one, even with kill -9. As a last resort to resolve the situation I tried to reboot the box, however shutdown, halt, reboot, and init 6 all failed to reboot/shutdown, even when given appropriate --force settings. ControlAltDel produced a message about rebooting on the console, but the system would not reboot. I had to hard power-cycle the box to resolve the situation. (See my other question, Should I worry about the integrity of my linux software RAID5 after a crash or kernel panic?) What would cause a scenario like this? What else could I have done to resolve it besides a hard reboot? What can I do to prevent such a situation in the future?

  Read the article

• Building Great-Looking, Usable Apps: A two-day workshop applying Oracle’s best UX practices in ADF

  - by mvaughan

  By Misha Vaughan, Oracle Applications User ExperienceI have been with Oracle for more than 12 years. It is a company that has granted me extraordinary creative freedom to help deliver compelling experiences for customers.I am beyond proud to talk about one of the experiences we just took for a test drive. Recently, we delivered a first-of-its-kind, three-team collaboration, train-the-trainer event in Reading, U.K., on building great-looking, usable apps based on Oracle Fusion Applications -- using the ADF tool kit. A new kind of workshopKevin Li, Platform Product Director, asked the Oracle Applications User Experience VP, Jeremy Ashley, if the team had anything to help partners and customers build applications that looked like Fusion. He was receiving this request from European partners and customers.Some quick conversations ensued, and the idea for the workshop was born: We would conduct an experiment.  We would work with feedback from the key Platform Technology Solutions (PTS) trainers under Andre Pavanello, Director, Platform Technology Solutions, in Europe, Middle East, and Africa. We would partner with the ADF team lead by Grant Ronald, Director of Product Management, title> and leverage the Applications UX expertise in Ashley’s team.The goal: Create a pilot workshop that in two days would explain to an ADF developer how to leverage the next-generation user experience best-practices developed for Fusion Apps. Why? Customers who need integrations with Oracle Fusion Applications, who are looking for custom applications that need to co-exist with Fusion, or who quite simply want a next-generation design for a custom app, need their solutions to reflect the next-generation research and design.Building an event for an ADF developerThe biggest hurdle was figuring out where to start.  How far into user experience country do you take an ADF developer? How far into ADF do you need to go if you are a UX professional?After some time in the UX kitchen, the workshop recipe looked like this: Mix equal parts: Fusion user experience design principles and functional design patterns The art and science behind UX How to wireframe designs that you can build in Fusion How to translate those designs into an ADF application Ultan O’Broin, Director of Global User Experience, explaining the trouble ticket wireframe design exerciseLynn Munsinger, Senior Group Product Manager, explaining the follow-on trouble ticket ADF coding exercise For spice, add:•    Debra Lilley, Fujitsu and ACE director, showcasing some of the latest ADF design work in the new face of Fusion Applications •    Partner show-and-tell of example apps they have built with FMW and ADF that are dynamic, beautiful, and interactive.Debra Lilley, Oracle ACE Director and Fujitsu Fusion Champion on the new face of Fusion built with ADF and Fusion extensibility with composers as a window into “the possible”?The taste testThis first go-round of the workshop was aimed squarely at ADF developers and partners.  We were privileged to have participation and feedback from:•    Sten Vesterli, Scott/Tiger S. A., Denmark•    John Sim, Fishbowl Solutions, UK•    Josef Huber, Primus Delphi Group, Munich•    Thaddaus Weindl, Primus Delphi, Group , Munich•    Praveen Pillalamarri, EiS Technologies, Bangalore•    Balaji Kamepalli, EiS Technologies, Bangalore•    Plinio Arbizu, Services & Processes Solutions S. A., Mexico•    Yannick Ongena, infoMENTUM, UK•    Jakub Ciszek, infoMENTUM, UK•    Mauro Flores, infoMENTUM, UK•    Matteo Formica, infoMENTUM, UKRichard Bingham, Oracle, Mauro Flores and Matteo Formica, infoMENTUMWhy is this so exciting?  Oracle has invested heavily in the research and development of the Oracle Fusion Applications user experience. This investment has been and continues to be applied across the product lines. Now, we finally get to teach customers and partners how to take advantage of this investment for custom solutions.This event was a pilot to test-drive the content, as well as a train-the-trainer event that our EMEA colleagues will be using with partners who want to build with Fusion Apps design patterns.What did attendees think?"I liked most the science stuff, like eye-tracking, design patterns and best-practice (color, contrast),” Josef Huber said. “It was a very good introduction to UI design, and most developers and project managers are very bad in that.  So this course would be good for all developers and even project managers." Team Anonymous: John Sim, Fishbowl Solutions, Flavius Sana, Oracle, Josef Huber, infoMENTUM, Mireille Duroussaud, Oracle. Winners of the wireframing design exercise.  Sten Vesterli, of Scott/Tiger, said he attended to learn techniques he could use in his own projects. He wants to ensure that his applications better meet the needs of his users, and he said sessions during the workshop on user interface design and wireframing were most useful to him.  “Go to this event to learn the art and science of good user interfaces from people who really know how to do it,” he said.Sten Vesterli, Scott/Tiger, Angelo Santagata, Oracle Plinio Arbizu said the workshop fulfilled his goals, thanks to the recommendations given in how to design user interfaces to facilitate the adoption of applications among the final users. “The workshop combined these recommendations with an exercise that improved the technical comprehension, permitting the usage of JDeveloper to set forth our solutions,” he said. He added: “The first session that I really enjoyed was the five Fusion design principles. It was incredible to discover how these simple principles were included in an inherit manner in Fusion Applications, and I had been using many of them applying only ADF components.  Another topic that I enjoyed a lot was the eight recommendations about the visual design of UIs. The issues that were raised in that lesson are unknown to the developers and of great value to achieve an attractive presentation layer to the end users.  Participate in this workshop, and include these usability features in your projects and in this manner not only to facilitate and improve the user productivity, but also to distinguish you as a professional who takes advantage fully of the functionalities offered by Oracle technology. Praveen Pillalamarri came to the workshop to learn about the difficulties faced in UI and UX development, and how this can be resolved with the help of ADF.  He also appreciated the opportunity to talk with other individuals who came to the workshop. Pillalmarri said, “The way we looked at things in terms of work and projects were sharpened.  UI and UX design knowledge shared by you was quite interesting, especially the minute things which we ignored in the UI or UX design.” Plinio Arbizu, Services & Processes Solutions S. A., Richard Bingham, Oracle, Balaji Kamepalli, & Praveen Pillalamarri, EiS TechnologiesReady to spread the wordIn EMEA, Oracle customers and partners have access to three world-class trainers via Platform Technology Solutions: Mireille Duroussaud, Flavius Sana, and Angelo Santagata. Contact Andre Pavanello if you like to experience this workshop firsthand, or you have customers or partners who would benefit from the training.We are looking to bring the event to the U.S. in spring 2013. If you have interest in this kind of a workshop, leave a comment below. For those who want to follow the action, join the ADF Enterprise Methodology Group run by Oracle’s Chris Muir. Ask questions and continue with the conversation in this forum, or check blogs.oracle.com/usableapps for topics emerging from the workshop.

  Read the article

• VMWare Workstation 6.5.5 (64-bit) on Ubuntu 10.04 (64-bit) Odd Problem

  - by Android Eve

  I managed to successfully install VMWare Workstation 6.5.5 (64-bit) on Ubuntu 10.04 (64-bit). It works well and somehow feels faster and snappier than the same exact version on Ubuntu 8.04. However, there is one slight issue, somewhat hurting productivity: When the guest VM is Microsoft Windows (2K, XP), the mouse cursor turn from an arrow to a hand when it hovers over the Task Bar. When the mouse moves, this hand cursor blinks and the system doesn't respond to mouse clicks. When I move the mouse cursor back to the desktop area, it functions normally. That is, the problem exists only in the Task Bar area. Obviously, this makes it very difficult (read: impossible) for me to use the Start Menu, SysTray and the rest of the Task Bar. My workaround for now is to launch programs via their Desktop shortcuts or via the keyboard. Note: The same exact VMWare Workstation 6.5.5 (64-bit) on Ubuntu 8.04 (64-bit) doesn't exhibit this problem. Anyone seen this problem before? Do you know of a solution (or better workaround) to this problem?

  Read the article

• VMWare Converter - Remote Linux Install P2V

  - by Zed Said

  I am trying to get what I thought was an easy process working. Here is my situation. I have a remote linux server (running Debian) that I would like to turn into a VM so that I can do testing on it rather than the production server. I downloaded VMWare Converter. I went to the "convert machine" wizard, chose Powered-on machine, entered my remote machine details. Clicking next shows that it correctly connects to my remote linux box. Now, on the next screen, for Destination type, it enters "WMWare Infrastructure virtual machine", and I can't change this. This is where I am stuck. Why do I need another sever to convert with? Is this where my VM gets sent to? And why can't I just convert the VM and save it on the computer that I am running the converter program on? If I do have to use a vmware infrastructure destination, I am confused at what ESX is, why and how I use it. Any help with this process would be more than appreciated!

  Read the article

• Two large, linked Excel files take 30 minutes to save, except in VMWare environment

  - by Gerald L

  I support some tax consultants who love to use Excel when they should probably be using Access. Anyway, they have created two Excel files, A and B. File B has cells linked to file A. File A is 27 MB and file B is 16 MB. One worksheet has roughly 1 million rows and there is another worksheet doing a whole bunch of SUMIF on the 1 million rows. Not the best idea, but whatever. Both Excel files open and recalculate within a reasonable amount of time (1-2 minutes). For a files that large, this is acceptable. Here is the problem: Once you change a cell, and save the file B, it takes a solid 30 minutes to save the file, and the processors are going full speed. I've tried this on 6 different machines, all running Windows XP SP3 with Office 2007 SP2 and all patches. The specs vary from one machine with 512 MB or RAM to a machine with 4 GB of RAM and quad processors. Same result every time. Here is the clincher: If I do this same save operation on a VMWare virtual machine, the file gets saved in 1 minute. I've tried this with my ESX servers at the office, my Mac Fusion at home, and VMWare workstation at the office. It does not matter how much RAM the virtual machine has... it saves in about 1 minute every time. Does anybody have any idea why this is happening and how to fix?

  Read the article

• VMware vSphere 4.1 and BackupExec 2010

  - by Josh

  I'm sure a common problem with most shops is backups, their size, and the window in which you have to back up the data. What we are working with: VMware vSphere 4.1 Cluster PS4000XV Equallogic Storage Array (1.6TB Volume dedicated for Backup to Disk) Physical Backup Server with a single LTO4 drive. BackupExec 2010 R3 with the following agents, Exchange, SQL, Active Directory, VMware. Dual Gigabit MPIO Connections between all devices (Storage Array, Backup Server, VM Hosts) What we would like to accomplish: I would like to implement an efficient Backup to Disk to Tape solution where all of our VMs are backed up to the Storage Array first, and then once completely backed up to the array are replicated to tape. In the event we needed to recover, we would be able to do so directly from tape. Where we are at currently. Of the several ways I have setup the jobs in Backup Exec 2010 R3 the backup jobs all queue up at the same time, as soon as a job is finished backing up to disk it then starts that same job to tape, but pulling from the original source instead of the designated B2D location. I understand that I could create a job that backs up the "Backup to Disk" folder to tape, but in the event of restoration, I would first need to stage the data in the B2D folder before I could restore the VM. I would really like to hear from individuals in similar situations. Any and all comments and critiques are appreciated.

  Read the article

• VMware Server Host-Only Network Routing

  - by Chris

  I have a windows 2008 web server machine running VMware server. I have 3 VM's - All 3 are test servers so security isn't really a concern... each of them running windows 2008 standard and some of them serving web content. My ISP only allows one MAC address to access the physical switch, however they give me 10 public IP addresses to use. My question is, if I put each VM on their own Host only network, how can I route all traffic from a specific public IP on the host, to the corresponding host only adapter, therefore routing to the specific VM? For example: A single physical Adapter on the Host has the following public IP's assigned to it in windows networking: 74.208.14.10 74.208.14.20 74.208.14.30 Each VM is on a host-only network vm1 - 192.168.196.1 vm2 - 192.168.197.1 vm3 - 192.168.198.1 On the host, I want to route all traffic from 74.208.14.10 to VM1 and 74.208.14.20 to VM2 and 74.208.14.30 to vm3 without using VMware NAT, or bridged connections. I want each server to appear to have its own public IP address. My guess is i can modify the route tables somehow, or perhaps in ICS...but i'm not sure how.

  Read the article

• ADO 2.8, VMWare and SQL Server - sudden bulk dropped connections

  - by CodeByMoonlight

  We have an overworked server currently running a single SQL Server 2000 instance on physical hardware, and about 40 different apps interact with it on a daily basis. Last year, the RAID controller failed and we had no spare, so IT Support hurriedly migrated it overnight to a copy running on a VMWare Server. While it was on that server everything ran much quicker due to it being a big improvement in spec. However, the biggest app using it had occasional serious errors which never occurred on physical hardware. Specifically, several times a week it would disconnect batches of users - anywhere from just ten to hundreds at once, and all at the same time. It didn't affect any particular users or PCs or offices - all were affected equally. The only common thing was the app, which is a VB6 app using ADO 2.8 to connect. The other apps connecting to that virtualised instance of SQL Server seemingly had no problems, although they were (and are) responsible for only a tiny fraction of the work involving this server. The upshot is that after about two weeks of loving the speed and hating the random mass disconnections (which we were never able to find a cause for), we sadly took the decision to return to physical hardware and the disconnections vanished. Now we've reached the point where the old server just can't handle all that's being asked of it, and we're intending to migrate everything to 2 or more other servers. The snag is that there's a good chance they'll have to be virtual ones again. Given what happened last time, I'm trying to find out what possible reasons there could be for these mass disconnections. We were running VMWare ESX, but the network is Novell-based. Also, the server had a linked server setup to connect to an Informix server using a known-to-be-buggy ODBC driver, and this is used throughout the day. Any ideas on the cause(s)?

  Read the article

• Cannot Connect To VMWare Guest OS Using Either RDP or VNC

  - by Humanier

  Hi, I have a PC (Windows XP SP3) with VMWare Workstation 7 installed. The VMWare hosts Windows Server 2003 Enterprise Edition R2. RealVNC (4.1.3) is installed on both OS'es. Both of them use Hamachi2. Host OS (WinXP) also runs ZoneAlarm Firewall. Hamachi network is set as trusted. My goal is to allow RDP and VNC connections to be made to the guest OS (Windows Server 2003). Both options work absolutely fine if I connect from the host OS. However I have problems when other computers from our Hamachi network try to connect the guest OS (Win2K3). 1) RDP connections. RDP window opens, shows black content and after 15-20 seconds displays following error: http://lh6.ggpht.com/_yQhsRRimgKU/TArRrtiteQI/AAAAAAAABZA/e96za-y9wzo/rdp_error.JPG 2) RealVCN connections. Users are able to connect but all they see is a black screen inside VNC window. At the same their input (keystrokes or mouse moves/clicks) are visible when looking at the console window of the Win2K3. I really appreciate any ideas on how to resolve mentioned problems. Thank you in advance.

  Read the article

• Cannot Connect To VMWare Guest OS Using Either RDP or VNC

  - by Humanier

  Hi, I have a PC (Windows XP SP3) with VMWare Workstation 7 installed. The VMWare hosts Windows Server 2003 Enterprise Edition R2. RealVNC (4.1.3) is installed on both OS'es. Both of them use Hamachi2. Host OS (WinXP) also runs ZoneAlarm Firewall. Hamachi network is set as trusted. My goal is to allow RDP and VNC connections to be made to the guest OS (Windows Server 2003). Both options work absolutely fine if I connect from the host OS. However I have problems when other computers from our Hamachi network try to connect the guest OS (Win2K3). 1) RDP connections. RDP window opens, shows black content and after 15-20 seconds displays following error: http://lh6.ggpht.com/_yQhsRRimgKU/TArRrtiteQI/AAAAAAAABZA/e96za-y9wzo/rdp_error.JPG 2) RealVCN connections. Users are able to connect but all they see is a black screen inside VNC window. At the same their input (keystrokes or mouse moves/clicks) are visible when looking at the console window of the Win2K3. I really appreciate any ideas on how to resolve mentioned problems. Thank you in advance.

  Read the article

• Expand disk space on Ubuntu 10.04 (VMWare Guest)

  - by Jason Clawson

  I need to resize the disk space of an ubuntu guest in VMWare Workstation. After using the expand disk utility in vmware workstation, I need to do some linux magic to resize the parition. I have searched and found a lot of posts about resizing it. Unfortunately I don't really understand it all that well. Can anyone help me out with this? df -h gives me: Filesystem Size Used Avail Use% Mounted on /dev/mapper/ubuntu-root 19G 2.6G 16G 15% / none 496M 172K 495M 1% /dev none 500M 0 500M 0% /dev/shm none 500M 64K 500M 1% /var/run none 500M 0 500M 0% /var/lock none 500M 0 500M 0% /lib/init/rw none 19G 2.6G 16G 15% /var/lib/ureadahead/debugfs /dev/sda1 228M 36M 181M 17% /boot lvs says: LV VG Attr LSize Origin Snap% Move Log Copy% Convert root ubuntu -wi-ao 18.88g swap_1 ubuntu -wi-ao 884.00m fdisk -l says: Disk /dev/sda: 21.5 GB, 21474836480 bytes 255 heads, 63 sectors/track, 2610 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00033718 Device Boot Start End Blocks Id System /dev/sda1 * 1 32 248832 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 32 2611 20719617 5 Extended /dev/sda5 32 2611 20719616 8e Linux LVM I really appreciate the help.

  Read the article

• VMWare Setup with 2 Servers and a DAS (DELL MD3220)

  - by Kumala

  I am planning to use a VMWare based setup consisting of two VMWare servers (2 CPU, 256GB Memory) and a DAS (DELL MD3220 with 24x900GB disks). The virtual machines will be half running MS SQL databases (Application, Sharepoint, BI) and the other half of the VM will be file services, IIS. To enhance the capacity of the storage, we'll be adding a MD1220 enclosure with another 24x900GB to the MD3220. Both DAS will have 2 controllers. Our current measured IOPS is 1000 IOPS average, 7000 IOPS peak (those happen maybe twice per hour). We are in the planning phase now and are looking at the proper setup of the disks. The intention is to setup up both DAS one of the DAS with RAID 10 only and the other DAS with RAID 5. That will allow us to put the applications on the DAS that supports the application performance needs best. Question is how best to partition the two DASs to get best possible IOPS/MBps, each DAS will have to have 2 hot spares? For the RAID 5 Setup: Generally speaking, would it be better to have one single disk group across all 22 disks (24 - 2 hot spares) with both controllers assigned to the one disk group or is it better to have 2 disk groups each 11 disks, assigned to one of the two controllers? Same question for the RAID 10 setup: The plan is: 2 disks for logs (Raid 1), 2 Hotspare and 20 disks for RAID 10. Option 1: 5 * 4 disks (RAID 10), with two groups assigned to 1 controller and 3 groups to the other controller Option 2: One large RAID 10 across all the disks and have both controllers assigned to the same group? I would assume that there is no right or wrong, but it all depends very much on the specific application behaviour, so I am looking for some general ideas what the pros and cons are of the different options. IF there are other meaningful options, feel free to propose them.

  Read the article

• v2v of RHEL5 box - issues with retaining MAC address

  - by Alex Berry

  For the last week we have been troubleshooting a customer's Red Hat Virtual Machine running on ESXi. We've been using Veeam to try to create a replica off-site and have been having getting it to work on a decent schedule and recently we noticed that there were issues with orphaned snapshots while looking at the datastore. You can see several snapshots in the same folder and it's causing issues with replication and backup, so we decided the cleanest way was to v2v the machine to another datastore so that we had a clean single-vmdk setup to work with, this is where our trouble started. We first started off with a v2v using vmware converter and connecting to the powered on machine as we were having issues doing an offline v2v. This copied fine but when I tried to set a static MAC using this article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=507 the new VM wouldn't take the address, it simply obtained a new MAC, received a dhcp lease and then would only boot up to a blank red screen, never the login screen. So the next step was to do an offline v2v, once we finally got it working. Same thing, followed the kb to the letter and still it wouldn't take the MAC. I then tried it again and upon completion I compared both old and new VMX file, copying every identifier and variable possible, then unregistered both VMs, uploaded the new VMX file and booted, only to see the same results. Finally I did the same as above but I copied the disk using DD to a second attached vmdk and then attached this to the new VM, and still no luck. After downloading the modified VMX file after the first boot and comparing it to the original I created I found that the bios uuid had changed from the one I typed in manually, so I'm assuming this may be the snagging point, but I have no idea. I've never had this issue before on a P2V and I'm just wondering if someone could shed some light on this, maybe it's to do with RHEL licencing?

  Read the article

• How do I restore to a delta file (disk) on Vmware ESXi

  - by Oscar

  Using VMware Server ESXi (freebie version) I have a Virtual Machine (win 2k3 r2 server). When I first provisioned it I took a snapshot of it. I recently tried to clone the primary drive using my standard hardware-based method to grow a windows disk. (using knoppix, clone drive to a new drive, make it bootable, then I intended to extend the partition via diskpart from within windows). This process failed; I tried setting the cloned drive (via the vmware gui) to replace the original drive, boot and be done. This didn't work out so well. The machine never booted. I checked the boot order, the disk location and all the basics I usually do. As a failsafe, I then tried changing all the settings back so the machine would boot to the original drive and I could figure out (as I eventually did) a better way of growing the disk. However when I powered on the machine with the original drive, it reverted back to that initial snapshot I created; It lost all the changes since. I looked in the file system and found a few files, I think the keyfile here is one named "delta" and I'm assuming that's the disk I want, but I can't find a way to have the Virtual Machine actually use that drive/file. It isn't available to add when I go to add an existing drive. Do I need to somehow commit that delta to the original drive and then boot from it again? Can you point me in the right direction? I've since discovered the proper way of growing drives using "vmkfstools" but I need to get back to the original state of the machine to try this out. Any help would be greatly appreciated.

  Read the article

• Cannot Connect To VMWare Guest OS Using Either RDP or VNC

  - by Humanier

  I have a PC (Windows XP SP3) with VMWare Workstation 7 installed. The VMWare hosts Windows Server 2003 Enterprise Edition R2. RealVNC (4.1.3) is installed on both OS'es. Both of them use Hamachi2. Host OS (WinXP) also runs ZoneAlarm Firewall. Hamachi network is set as trusted. My goal is to allow RDP and VNC connections to be made to the guest OS (Windows Server 2003). Both options work absolutely fine if I connect from the host OS. However I have problems when other computers from our Hamachi network try to connect the guest OS (Win2K3). RDP connections. RDP window opens, shows black content and after 15-20 seconds displays following error: RealVCN connections. Users are able to connect but all they see is a black screen inside VNC window. At the same their input (keystrokes or mouse moves/clicks) are visible when looking at the console window of the Win2K3. I really appreciate any ideas on how to resolve the mentioned problems.

  Read the article

• VMWare ESXi 5 - Expanded RAID 5 array - cannot access datastore

  - by Dayton Brown

  I'm using VMWare ESXi 5 and had a 2 TB RAID 5 setup on an HP DL360 with a P400i RAID card. I added two more 1 TB drives and using the SmartStart ACU, added the drives and expanded the logical disk. Now after booting back to ESXi, the server boots, but lists no available persistent storage. I've rescanned multiple times to no avail: the Datastore doesn't show up. I booted to GParted and the 1.8TB partition shows up, but it shows as unknown. Anyone have any good ideas? EDIT: Final Solution So after much gnashing of teeth, it was fairly simple to solve. I purchased an eSata 2 TB external drive and a PCI eSata card for my server. I then used Clonezilla to image the current partitions to my new external drive. You have to check "don't check drive sizes" in advanced mode, otherwise it will yell at you for have a smaller drive. For some reason my PCI card wouldn't boot on my HP server, so I hooked the drive up to another desktop I had, booted to VMWare, and copied the vmdk's to another drive. I'm going to blow out the RAID config and then create 1.5TB logical drives.

  Read the article

• Cannot Connect To VMWare Guest OS Using NEither RDP Nor

  - by Humanier

  Hi, I have a PC (Windows XP SP3) with VMWare Workstation 7 installed. The VMWare hosts Windows Server 2003 Enterprise Edition R2. RealVNC (4.1.3) is installed on both OS'es. Both of them use Hamachi2. Host OS (WinXP) also runs ZoneAlarm Firewall. Hamachi network is set as trusted. My goal is to allow RDP and VNC connections to be made to the guest OS (Windows Server 2003). Both options work absolutely fine if I connect from the host OS. However I have problems when other computers from our Hamachi network try to connect the guest OS (Win2K3). 1) RDP connections. RDP window opens, shows black content and after 15-20 seconds displays following error: http://lh6.ggpht.com/_yQhsRRimgKU/TArRrtiteQI/AAAAAAAABZA/e96za-y9wzo/rdp_error.JPG 2) RealVCN connections. Users are able to connect but all they see is a black screen inside VNC window. At the same their input (keystrokes or mouse moves/clicks) are visible when looking at the console window of the Win2K3. I really appreciate any ideas on how to resolve mentioned problems. Thank you in advance.

  Read the article

• VMWare use of Gratuitous ARP REPLY

  - by trs80

  I have an ESXi cluster that hosts several Windows Server VMs and around 30 Windows workstation VMs. Packet captures show a high number of ARP replies of the form: -sender_ip: VM IP -sender_mac: VM virtual MAC -target_ip: 0.0.0.0 -target_mac: Switch interface MAC The specific addresses aren't really a concern -- they're all legitimate and we're not having any problems with communications (most of the questions surrounding GARP and VMWare have to do with ping issues, a problem we don't have). I'm looking for an explanation of the traffic pattern in an environment that functions as expected. So the question is why would I see a high number of unsolicited ARP replies? Is this a mechanism VMWare uses for some purpose? What is it? Is there an alternative? EDIT: Quick diagram: [esxi]--[switch vlan]--[inline IDS]--[fw]--(rest of network) The IDS is complaining about these unsolicited ARPs. Several IDS vendors trigger on ARP replies without a prior request, or for ARP replies that have a target IP of 0.0.0.0. The target MAC in these replies is the VLAN interface on the switch. Capture points: -The IDS grabs the offending packets -The FW can see the same ones -A VM on the ESXi host does not see these, although there is an ARP request for a specific IP on the ESXi host that has source_ip=0.0.0.0 and source_mac=[switch vlan interface]. I can't share the captures, unfortunately. Really I'm interested in finding out if this is normal for an ESXi deployment.

  Read the article

• Memory overcommitment on VmWare ESXi 5.0

  - by Tibor

  I would like to understand better the possibilities of VmWare ESXi memory overcommitment. I've read this paper from VmWare, so I am familiar with general concepts, such as hypervisor swapping, memory balooning and page sharing. It seems that a combination of these techniques allows for quite a large degree of overcommitment. However, I am not sure. I am deploying a virtual test lab comprising of 4 identical sets of virtual servers and workstations and a couple of virtual router instances. Overall, I expect to be running around 20 virtual machines with Windows XP, Windows 7 and Ubuntu for workstation hosts as well as CentOS and Windows 2008 Server instances for servers. The problem is, however, that the host machine only has 12GB of RAM and I don't have an option to stuff in some more. I would like to know what is the best option to configure hosts in order to achieve reasonable performance within the constrains. I have these two options: Allocate as little as possible of RAM to each virtual machine. Allocate an extraordinary amount (such as 4 GB per instance) and let the baloon driver do the rest. Something else? Which would work better? Machines will mostly be idle, so I don't have any major performance expectations, but they should run reasonably smoothly nevertheless.

  Read the article

• VMware Workstation Bridged Network Host UnReachable

  - by user2097818

  VMware Workstation 7 on Win7-64 (Home Premium). I have confirmed this on any guest running on this machine (from winxp to debian). I am using a bridged network connection for my guests (Automatic on VMnet0). All of the network configuration is done with DHCP (including on the host). Problem What I can not do: Ping my host machine from inside any VM. (either shows me "Destination Host Unreachable" or will just timeout) What I CAN do right after power up, with no problems at all. I can connect to the internet from inside the VM I can ping my router from inside the VM I can ping other machines on my network from inside the VM Other machines can ping the VM Other machines can ping the host My host machine can ping the VM (this one is important. read further) Details So I have my router assigned as 192.168.2.1/255.255.255.0, and the router provides the DHCP service (and it seems to be doing so successfully). There are no IP conflicts on the network that I am aware of. All Gateways and Subnet masks are appropriate and matching. My entire workshop is on one single subnet, with one single DHCP server and gateway. There is one method in which I can ping successfully, but it requires an active connection initiated from the host (I start pinging from host to VM). During the period of the active connection, I can successfully ping from VM to host, using explicit IP address. As soon as the host connection is closed, the VM ping starts hanging with the same old messages. My Thoughts This really feels like a firewall problem, but I have turned off all firewalls on host and VM, powered down the network, powered back up, and the problem still persists. And if it was firewall, why would only the IP address associated with bridged VM networks be blocked. I feel as though my host operating system (Win7) is somehow configured incorrectly, or, VMware Workstation is configured incorrectly from the host side. Although I have done my best to put everything in default, I feel like I am missing something silly.

  Read the article

• vSphere education - What are the downsides of configuring virtual machines with *too* much RAM?

  - by ewwhite

  VMware memory management seems to be a tricky balancing act. With cluster RAM, Resource Pools, VMware's management techniques (TPS, ballooning, host swapping), in-guest RAM utilization, swapping, reservations, shares and limits, there are a lot of variables. I'm in a situation where clients are using dedicated vSphere cluster resources. However, they are configuring the virtual machines as though they were on physical hardware. In turn, this means a standard VM build may have 4 vCPUs and 16GB or more of RAM. I come from the school of starting small (1 vCPU, minimal RAM), checking real-world use and adjusting up as necessary. Some examples from a "problem" cluster. Resource pool summary - Looks almost 4:1 overcommitted. Note the high amount of ballooned RAM. Resource allocation - The Worst Case Allocation column shows that these VMs would have access to less than 50% of their configured RAM under constrained conditions. The real-time memory utilization graph of the top VM in the listing above. 4 vCPU and 64GB RAM allocated. It averages under 9GB use. Summary of the same VM What are the downsides of overcommitting and overconfiguring resources (specifically RAM) in vSphere environments? Assuming that the VMs can run in less RAM, is it fair to say that there's overhead to configuring virtual machines with more RAM than they need? What is the counter-argument to: "if a VM has 16GB of RAM allocated, but only uses 4GB, what's the problem??"? E.g. do customers need to be educated? What specific metric should be used to meter RAM usage. Tracking the peaks of "Active" versus time?

  Read the article

• How do I tunnel an HTTPS proxy through a virtual machine (VMWare)

  - by Kyle

  I have a personal setup at home using VMWare Workstation. I also have a set of Virtual Private Machines that run Squid, and therefore provide me HTTPS proxy tunnels. Using Proxifier, I can tunnel all traffic for given applications through these tunnels. However, I also have a few virtual machines for dev/staging/experimentation/etc. I generally just use NAT to provide Internet access to the machines, and if I need to use these proxies, I can just setup Proxifier (or a Linux equivalent) to pipe the traffic through them. No problem. But... I got to thinking: Wouldn't it be great if I could assign these proxy tunnels to a virtual machine, so that when I start up the VM, it has instant-on access through the tunnel and not my local connection? (EDIT: Of course, it would USE my local connection, but it would tunnel traffic through the proxy.) To be more clear: I want a solution that binds the proxy to a VM, so that when I start the VM, I don't have to use a proxy client to connect to the tunnel - I am already piping all traffic from that VM through that proxy. I did a bit of searching, and the closest thing I could find was this: How to route public static IP to a virtual machine on a vmware ESXi host? Which wasn't all that applicable. The proxies are protected by user/pass but do not filter by IP. Again, they are HTTPS proxies setup through Squid. Any ideas on how to make this happen? Thanks a ton.

  Read the article

• Can't install kernel-uek-headers for currently running kernel

  - by haydenc2

  I have just created a VM in VMWare and installed a minimal install of Oracle Enterprise Linux 6.3. # cat /etc/oracle-release Oracle Linux Server release 6.3 It is running with the UEK kernel. # uname -r 2.6.39-200.24.1.el6uek.x86_64 When I try and install VMWare Tools, I get the following error. Searching for a valid kernel header path... The path "" is not a valid path to the 2.6.39-200.24.1.el6uek.x86_64 kernel headers. Would you like to change it? [yes] I have version 2.6.39 of the UEK installed, but the kernel-uek-headers are only 2.6.32. # yum list kernel-uek Installed Packages kernel-uek.x86_64 2.6.39-200.24.1.el6uek @anaconda-UEK2/6.3 kernel-uek.x86_64 2.6.39-200.29.3.el6uek @ol6_UEK_latest # yum list kernel-uek-headers Installed Packages kernel-uek-headers.x86_64 2.6.32-300.32.2.el6uek @ol6_latest And it appears that the headers for 2.6.39 aren't there. # yum list kernel-uek-headers --showduplicates Installed Packages kernel-uek-headers.x86_64 2.6.32-300.32.2.el6uek @ol6_latest Available Packages kernel-uek-headers.x86_64 2.6.32-100.28.5.el6 ol6_latest kernel-uek-headers.x86_64 2.6.32-100.28.9.el6 ol6_latest kernel-uek-headers.x86_64 2.6.32-100.28.11.el6 ol6_latest kernel-uek-headers.x86_64 2.6.32-100.28.15.el6 ol6_latest kernel-uek-headers.x86_64 2.6.32-100.28.17.el6 ol6_latest kernel-uek-headers.x86_64 2.6.32-100.34.1.el6uek ol6_latest kernel-uek-headers.x86_64 2.6.32-100.35.1.el6uek ol6_latest kernel-uek-headers.x86_64 2.6.32-100.36.1.el6uek ol6_latest kernel-uek-headers.x86_64 2.6.32-100.37.1.el6uek ol6_latest kernel-uek-headers.x86_64 2.6.32-200.16.1.el6uek ol6_latest kernel-uek-headers.x86_64 2.6.32-200.19.1.el6uek ol6_latest kernel-uek-headers.x86_64 2.6.32-200.20.1.el6uek ol6_latest kernel-uek-headers.x86_64 2.6.32-200.23.1.el6uek ol6_latest kernel-uek-headers.x86_64 2.6.32-300.3.1.el6uek ol6_latest kernel-uek-headers.x86_64 2.6.32-300.4.1.el6uek ol6_latest kernel-uek-headers.x86_64 2.6.32-300.7.1.el6uek ol6_latest kernel-uek-headers.x86_64 2.6.32-300.11.1.el6uek ol6_latest kernel-uek-headers.x86_64 2.6.32-300.20.1.el6uek ol6_latest kernel-uek-headers.x86_64 2.6.32-300.21.1.el6uek ol6_latest kernel-uek-headers.x86_64 2.6.32-300.24.1.el6uek ol6_latest kernel-uek-headers.x86_64 2.6.32-300.25.1.el6uek ol6_latest kernel-uek-headers.x86_64 2.6.32-300.27.1.el6uek ol6_latest kernel-uek-headers.x86_64 2.6.32-300.29.1.el6uek ol6_latest kernel-uek-headers.x86_64 2.6.32-300.29.2.el6uek ol6_latest kernel-uek-headers.x86_64 2.6.32-300.32.1.el6uek ol6_latest kernel-uek-headers.x86_64 2.6.32-300.32.2.el6uek ol6_latest The kernel for 2.6.32 is there. # yum list kernel-uek --showduplicates Installed Packages kernel-uek.x86_64 2.6.39-200.24.1.el6uek @anaconda-UEK2/6.3 kernel-uek.x86_64 2.6.39-200.29.3.el6uek @ol6_UEK_latest Available Packages kernel-uek.x86_64 2.6.32-100.28.5.el6 ol6_latest kernel-uek.x86_64 2.6.32-100.28.9.el6 ol6_latest kernel-uek.x86_64 2.6.32-100.28.11.el6 ol6_latest kernel-uek.x86_64 2.6.32-100.28.15.el6 ol6_latest kernel-uek.x86_64 2.6.32-100.28.17.el6 ol6_latest kernel-uek.x86_64 2.6.32-100.34.1.el6uek ol6_latest kernel-uek.x86_64 2.6.32-100.35.1.el6uek ol6_latest kernel-uek.x86_64 2.6.32-100.36.1.el6uek ol6_latest kernel-uek.x86_64 2.6.32-100.37.1.el6uek ol6_latest kernel-uek.x86_64 2.6.32-200.16.1.el6uek ol6_latest kernel-uek.x86_64 2.6.32-200.19.1.el6uek ol6_latest kernel-uek.x86_64 2.6.32-200.20.1.el6uek ol6_latest kernel-uek.x86_64 2.6.32-200.23.1.el6uek ol6_latest kernel-uek.x86_64 2.6.32-300.3.1.el6uek ol6_latest kernel-uek.x86_64 2.6.32-300.4.1.el6uek ol6_latest kernel-uek.x86_64 2.6.32-300.7.1.el6uek ol6_latest kernel-uek.x86_64 2.6.32-300.11.1.el6uek ol6_latest kernel-uek.x86_64 2.6.32-300.20.1.el6uek ol6_latest kernel-uek.x86_64 2.6.32-300.21.1.el6uek ol6_latest kernel-uek.x86_64 2.6.32-300.24.1.el6uek ol6_latest kernel-uek.x86_64 2.6.32-300.25.1.el6uek ol6_latest kernel-uek.x86_64 2.6.32-300.27.1.el6uek ol6_latest kernel-uek.x86_64 2.6.32-300.29.1.el6uek ol6_latest kernel-uek.x86_64 2.6.32-300.29.2.el6uek ol6_latest kernel-uek.x86_64 2.6.32-300.32.1.el6uek ol6_latest kernel-uek.x86_64 2.6.32-300.32.2.el6uek ol6_latest kernel-uek.x86_64 2.6.39-100.5.1.el6uek ol6_UEK_latest kernel-uek.x86_64 2.6.39-100.6.1.el6uek ol6_UEK_latest kernel-uek.x86_64 2.6.39-100.7.1.el6uek ol6_UEK_latest kernel-uek.x86_64 2.6.39-100.10.1.el6uek ol6_UEK_latest kernel-uek.x86_64 2.6.39-200.24.1.el6uek ol6_UEK_latest kernel-uek.x86_64 2.6.39-200.29.1.el6uek ol6_UEK_latest kernel-uek.x86_64 2.6.39-200.29.2.el6uek ol6_UEK_latest kernel-uek.x86_64 2.6.39-200.29.3.el6uek ol6_UEK_latest Should I downgrade the kernel to 2.6.32 so I can install VMWare tools? Is there another way to get the kernel-uek-headers package for the 2.6.39 UEK?

  Read the article

• Can VMWare Workstation 7.x and Sun VirtualBox 3.1.x co-exist on the same Windows7 64bit HOST togethe

  - by Heston T. Holtmann

  BACKGROUND INFO: My Old Workstation Host: 32bit Ubuntu 9.04 running Sun Virtual Box 3.x hosting Windows-XP VM Guest for Windows Software app development (VS2008, etc) My New Workstation Host: 64bit Windows7 running VMWare Workstation 7 to host 32bit Ubuntu 9.10 for linux project work. NEEDS: I need to get my original Sun-VBox Windows-XP Guest running on my new Windows7 Workstation either imported into VMWare or running on the Windows version of Sun-Virtual box (I have the VM-Guest Backed up and copied to the new computer data drive. PROBLEM: I don't need to run VM's from Both Virtual-Machine Software packages at the same time... but I do need to run some older Virtual-Machines from Sun-Virtualbox on the same 64bit Windows7 host until I can migrate those VM's to VMWare. Before switching from Linux HOST to Windows HOST, I ensured to export the VirtualBox VM to an OVF "appliance" with intentions of importing into VMWare Workstation 7.. but VMWare gives me an error stating it can't import it QUESTION: Will installing Sun Virtual Box bash or interfere with my VMWare installtion?

  Read the article

• What's the best way to share folder between guest and host machine in VMWARE over VPN?

  - by melaos

  i have a win 7 host machine and i'm running my vmware which is a win server machine. So i'm doing windows development work on my vmware. the source codes are in my win 7 machine which i access using a shared folder method. My only problem now is when my vmware connects to VPN to the deploy the codes, the folder gets disconnected. as i don't really understand the networking or the vmware architecture, what can i do so that i can share the folder from my win 7 host machine to my vmware without getting disconnected when i connect to VPN using my guest (win server) machine? please advise. stuck on vmware thanks

  Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >