Search Results

Search found 17149 results on 686 pages for 'computer buying'.

Page 230/686 | < Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >

• What hardware makes a good MongoDB Server ? Where to get it ?

  - by João Pinto Jerónimo

  Suppose you're on dell.com right now and you're buying a server to run your MongoDB database for your small startup. You will have to handle literally tens of thousands of writes and reads per minute (but small objects). Would you go for 2 processors ? Invest more on RAM ? I've heard (correct me if I'm wrong) MongoDB handles the most it can on the RAM and then flushes everything to the disk, in that case I should invest on a CPU with a large L2 cache, probably 40GB of RAM and a solid state drive.. right ? Would I be better off with a high end (~$11,309, 2 expensive processors, 96GB of RAM) server or 2x(~$6,419, 2 expensive processors, 12GB of RAM) servers ? Is Dell ok or do you have better sugestions ? (I'm outside the US, on Portugal)

  Read the article

• How to increase signal/range of your Wi-Fi antenna-less repeater/booster over the network?

  - by kenorb

  I've BT Home Hub in the upper flat (2-3 walls behind) and I'm using WPS Wireless-N Wifi Range Router Repeater Extender in my flat where I'm using my laptop. These are antenna-less devices. Are there any life-hack tricks to increase signal/range of my repeater without buying the new more powerful repeater? I've tried already to move my repeater closer to the ceiling or putting the aluminium foil underneath, but it didn't help. Are there any methods, specific plates or materials which can boost the signal? Specification: Model: WN518W2 Frequency range: 2.4-2.4835GHz Wireless transmit power: 14 ~17 dBm (Typical) Wireless Signal Rates With Automatic Fallback: 11n: Up to 300Mbps(dynamic), 11g: Up to 54Mbps(dynamic), 11b: Up to 11Mbps(dynamic) Modulation Technology: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM Receiver Sensitivity: 300M: -68dBm@10% PER / 150M: -68dBm@10% PER / 108M: -68dBm@10% PER / 54M: -68dBm@10% PER / 11M: -85dBm@8% PER / 6M: -88dBm@10% PER / 1M: -90dBm@8% PER Product dimensions: 11 * 6 * 7cm

  Read the article

• What is the maximum number of TCP connections I can have in Windows Server 2008?

  - by evilfred

  I would like to have as many connections (single connections from many different clients) as humanly possible in a server running on Windows Server 2008, in order to support a Comet-style application. The application is written in C#. The connections will not be chatty, they just need to be open (and stay open). Buying boatloads of memory and fast CPUs are not a problem. As far as I can tell, I will be limited to 65k simultaneous open connections per NIC - the maximum number of ports. Is this accurate? Or can I go beyond 65k connections / NIC somehow? It seems like there are server products for Linux at least that support hundreds of thousands of connections. How do they do this?

  Read the article

• Complete Apple Powerbook G4 format without disk

  - by Sam

  I have gone through many sites to look for the exact answer. However I failed. What I want: To completely format my Powerbook G4 to factory or brand new without any DVD/CD or Disk/Disc I am not worried about ethical or un-ethical way. I just need to format the entire Powerbook G4 to factory setting WITHOUT ANY DVD/CD/DISC/DISK so that It’s a brand new one. I am ready to do anything, but please don’t advice me on buying or download the MAC OS 10.5 Leopard from torrent or blah blah.

  Read the article

• I want to start my portfolio site using ASP.Net and I'm a bit lost about hwo to actually put it on t

  - by Papuccino1

  I found this site: www.discountasp.net They seem cheap enough and have a track record. I decided to host my site with them. Here's where I'm confused. I host the application (my website) with them and they give me an IP address, right? Users can visit my site by typing in that IP address right? (Of course once I move the index file and create a defauly web folder, etc.) Next step is buying a domain name right? Like www.mysite.com, right? Is this the way it's done, or am I doing it wrong?

  Read the article

• Why are hard drives moving to 4096 byte sectors, vs. 512 byte sectors?

  - by Chris W. Rea

  I've noticed that some Western Digital hard drives are now sporting 4K sectors, that is, the sectors are larger: 4096 bytes vs. the long-standing standard of 512 bytes. So: What's the big deal with 4K sectors? Is it marketing hype, or a real advantage? Why should somebody building a new PC care, or not, about 4K sectors? Why is this transition taking place now? Why didn't it happen sooner? Are there things to look out for when buying a 4K sector hard drive? e.g. incompatibility? Anything else we should know about 4K sectors?

  Read the article

• What's the fastest way to store/access large files?

  - by philfreo

  I do a lot of video editing on my Mac and need a way to store very large (30 GB) files, and don't have room on my HD. A USB/Firewire external hard drive would work, but it seems way too slow for consistently working with such large files. I've also considered buying another computer, with a large hard drive, and putting it on the same network with a shared folder. What's the fastest / most efficient way to do this? Please consider USB 2.0 speeds, hard drive read times, ethernet speeds, etc. Are there other options I should consider?

  Read the article

• Wireless bridge between two prolink adsl modem/router

  - by MyName

  Allright, so i've got 2 prolink hurricane h5004n. Its a broadband adsl modem and router. My Pc is connected to the first one via ethernet. What i want to do is a wireless bridge to make the 2 routers "talk". I've tried hooking up the dsl cable (as they are modems) in both to try but when one disconnects as the other connects. I don't really know about the configurations to be done of all the DCHP or RIP and NAT forwarding stuffs. (i'm just writing what i saw) In short i want the second router to act as a wifi repeater but i don't see any repeater option and i also do not want to connect them via ethernet. So is it possible to do something? Apart from buying another repeater i don't want to spend anymore i'm done :S

  Read the article

• Safe BIOS upgrade run from external USB-HDD and not native OS

  - by ecoologic

  I have a Toshiba M200 laptop which came with Windows Vista. After buying it, I replaced the OS with XP and recently I swapped the internal hard disk with a bigger one where I only have Ubuntu. So now I can boot XP from the external USB hard disk. There's a BIOS update available (2.3 against my 1.8) which I'd like to install and there's also a version for XP. Is it "reasonably" safe to install this upgrade for Windows XP (despite the original OS was Vista, the laptop model is the right one) from my external USB hard disk with Win XP?

  Read the article

• Is an eee-pc with an Atom N550 dual core OK for Rails 3 development?

  - by dan

  I'm buying an Asus eee-pc 1015PEM and hope to do test-driven Rails 3 development on it. Is the CPU fast enough or too painfully slow for this? I plan on installing Ubuntu. I currently develop on a 11 inch Macbook Air 2010 model. It works fine as a Rails development machine. But for some reason I'm drawn to developing on a cheap little netbook. I don't use any IDE's, and my development workflow is mostly switching between Vim, Gnu Screen, and bash.

  Read the article

• Is Lojack preinstalled on Dell's laptops?

  - by Blorgbeard

  I'm looking at buying a Dell Studio 15 or similar. Unfortunately, they all seem to come with Lojack software included and no option to take it out of the build. I really do not want this software installed on my laptop. It sounds really abusable, and hard to get rid of once installed - it hides in your BIOS and survives reinstalls, etc. Does anyone know whether Lojack comes preinstalled on this machine, or if they just ship you a disc, which could subsequently be broken in half and/or microwaved into submission?

  Read the article

• Storage setup for large files

  - by Mecca

  I need to store over 200TB of data (all types, biggest being video files) and be able to access it over a local network. The files will be accessed for editing or searches. I don't need versioning, but a setup that would keep me safe from harddrive failures would be nice. Right now the content is on different harddrives, some external drives, some regular. I don't exclude the possibility of buying new/extra drives if necessary. If they will ever be exposed to the web, it wont be to the public, but just a couple of people. I have no idea what to buy to make this happen. I see some NAS solutions over the internet like this http://www.bestbuy.com/site/a/2266043.p?id=1218317764591&skuId=2266043 but the storage is not enough, plus it doesn't seem to be scalable. What do you recommend? Thanks

  Read the article

• Are VLANs necessary for my environment?

  - by kleefaj

  Greetings. I'm the new network manager for a school. I've inherited an environment made up of several Windows servers, about 100 Windows clients, ten printers, one Cisco router, six Cisco switches, and 1 HP switch. Also, we're using VoIP. There are four floors in our building. The hosts on each floor are assigned to a separate VLAN. An office on the first floor has its own VLAN. All the switches are on their own VLAN. The IP phones are on their own VLAN. And the servers are on their own VLAN. For the number of hosts on the network, are all these VLANs really buying me anything? I'm new to the VLAN concept but it seems overly complicated for this environment. Or it's genius and I just don't get it. Any thoughts? Thanks, Jeff

  Read the article

• What is the specific advantage of a blade server for virtualisation?

  - by ChrisZZ

  We are planning to implement a VDI Solution. We had some discussions about Blade vs Rack. As we are only planning to implement 75-100 Clients, we calculated, that we would need 2 Servers with Dual 8C Processors - and a shared storage server. This calculation is based on a paper by ORACLE, that says, 12 active virtual machines per core. Now, for buying to servers, a blade does not scale financially. But the Blade has some other advantages: a) The interconnectivity between the blades is super-fast. b) IO Virtualisation Are there other advantages, that we should consider, that would make up for price - and are this advantages so important, that we should think about investing in the blade?

  Read the article

• Putting servers inside a refrigerator? [closed]

  - by Muhammad Jamal Shaikh

  It could be a silly question, but I decided to go for it. I shall be buying 3 servers in the next few weeks to set up a small webfarm at my home. I am told by different people who work in server rooms, that I should keep my servers in an air conditioned room. Which is really expensive, because the temperature here in south asia is between 10 to 50 degrees C. Here comes the funny part: I have an extra fridge in my home, why shouldn't I put the servers inside that fridge? Benefits: I don't have to buy the air conditioner. I don't have to buy the rack mount for the servers. The electricity consumed by the fridge is much much less than AC. Give me your suggestions!

  Read the article

• Cloning a linux system from sdx to cciss

  - by churnd

  I have an HP ML 310 server running CentOS Linux 5.5. I'm buying a RAID card (LSI 9260-8i) to set up a mirrored OS drive. Right now, the boot drive is set up with GRUB installed on the MBR of /dev/sda & has a 100MB /boot partition for /dev/sda1, then the rest is configured in LVM with a 20GB with a 20GB VG for the root partition & ~80GB VG for home. The new disk sizes will also be slightly larger as well. What is the best way to clone the boot drive to the new CCISS device?

  Read the article

• DRAC for remote OS install w/o Virtual Media

  - by The Diamond Z

  I have a few DELL servers in a remote DC and our ISP has been very kind about doing OS installs for us. However, as we move to Production and multiple DC's I'd like to be able to do the installs/re-installs internally and DRAC Enterprise w/SDRAM seems ideal. My question is, how do you get your install ISO's on to the SDRAM? Can I just copy it from a local DVD (temp USB hookup) or FTP? What's the advantage to the SDRAM over just buying a USB dongle (to leave plugged into the server) and installing a bootable install ISO? We're a virtual org generally using DSL (2mb) connections to the DC over the Internet and using 'Virtual Media' isn't viable for us.

  Read the article

• Using wifi router as bridge to increase signal?

  - by overtherainbow

  A friend of mine lives in an appartment building whose structure is such that wifi signal is very weak. Even a USB key won't work. I was thinking of buying an entry-level wifi router and reconfigure it as a bridge to act as repeater. Would that increase the chance of getting a good signal, or I shouldn't bother? If experience shows that it does improve things significantly, is their another router I should look at besides the Linux-based Linksys models? Thank you.

  Read the article

• putting servers inside a fridge! [closed]

  - by Muhammad Jamal Shaikh

  hi , i think its a silly question , but i decided to go for it. i shall be buying 3 servers in next few weeks for setup a small webfarm at my home. i am told by different people who work in server rooms , that i should keep my servers in a Air Conditioned room. which is really expensive.because temperature in south asia is b/w 10--50(Centigrade). here comes the funny part, i have an extra fridge in my home , why shouldn't i put the servers inside that fridge. here are benefits listed i dont have 2 buy the air Conditioner i dont have to buy the rack mount for the servers the electricity consumed by the fridge in much much lessor as compared to an AC be free to give your suggestions :) thanks Jamal.

  Read the article

• Feeding the kernels entropy source from other machines and/or increasing its maximum size

  - by David Spillett

  We have has a little trouble with a small box that acts as a VPN end-point and mail relay for our network, caused by the available entropy for /dev/random being too low (which causes TLS connection attempts by exim to fail). The machine doesn't do anything else, so the normal feed into the entropy pool (interrupt timings from things like disk access) is not enough. As a quick hack I've set a looping script that reads from /dev/hda at a couple of Mbyte/sec which keeps it topped up. Other than buying a hardware RNG, is there a clean way of piping data for entry from elsewhere, such as a copy of the data our file server uses for its entropy source? I've spotted several tips for using rng-tools to feed it from /dev/urandom on the same machine but that "feels dirty". Also, is it possible to increase the maximum pool size? It currently seems to max out at 3585.

  Read the article

• How can I use my laptop's monitor as my PC's ONLY monitor? (please vote to reopen) [closed]

  - by Randell

  Please vote to reopen. This is different from Can I use my laptop as a second monitor for my desk computer?, because that question is asking how to use the laptop screen as the secondary display, not as the only display. My PC's monitor just died and I'm not looking at buying a new monitor anytime soon. So I'm thinking of using my laptop's monitor for it. Both machines are running on Fedora linux. Edit: Both machines are connected to the same wireless network. PC needs to log in before it can connect to the network if I'm not mistaken.

  Read the article

• Why such a dramatic difference in wireless router max. simultaneous connections?

  - by Jez

  Recently, I've needed to look into buying a wireless router for a mission-critical system at work that will need to support quite a few simultaneous connections (potentially a few hundred laptops). One thing I've noticed is that there seems to be a dramatic difference between the max. simultaneous connections different routers can support; see this page for example - anything from 32 to 35,000! Why is there this degree of difference? You'd have thought that if we know how to make routers that can handle thousands of connections, we wouldn't be making stuff that's limited to a pathetic 32 anymore. Is it a firmware thing? A hardware thing? Are low-end manufacturers purposely putting low arbitrary connection limits in so people can be "encouraged" to pay more for high-end routers?

  Read the article

• iPhone VPN to iTunes Home Sharing

  - by Philip Crumpton

  my goal is to set up a VPN on a Windows machine that contains my iTunes library then connect to that VPN with my iPhone and be able to utilize Home Sharing remotely. I have read that this can easily be set up if the iTunes library is on a Mac (Network Beacon and YazSoft ShareTool are two products I quickly found). I can't find anyone who has had success on a Windows machine, though. In my thinking, there are two options (aside from buying a Mac): 1.) Existing utility that takes care of this for me (like the Mac-only options listed above) and is compatible with iPhone (Hamachi is NOT compatible with iPhone VPN) 2.) Manually configure a VPN to allow Bonjour multicast (can't find any information on this) FYI my router is a Linksys WRT54GL running Tomato 1.28

  Read the article

• What type of wireless adapter for Verizon Fios?

  - by ShoeLace1291

  I have verizon fios internet service. I believe they use a Wireless G router, but I just have one question. I currently am using a 54mbps wireless pci adapter in my Windows 7 custom build. It drops the internet connection all the time and is starting to get very irritating. I'm thinking about buying a new one, but all the 300mbps cards on newegg are wireless n. So my question is, will a wireless n network adapter make a difference with a wireless g router?

  Read the article

• Anyone have any experience with bargain laptop batteries?

  - by chris

  I've got an oldish D820 that's got a 100% dead battery. I know that I could, in theory, take it apart and replace bad cells in the battery. I'm not really comfortable with doing that. I also know that there are various places that sell replacement batteries for 20% to 80% of the cost that Dell would charge. Does anyone have any experiences with buying more than a couple of these off-brand batteries? If a battery goes boom, it could be really ugly, so I'd rather not risk it, but at the same time, the dell batteries are really expensive... Any opinions on these ebay / off-brand battery vendors? Thanks!

  Read the article

< Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >