Search Results

Search found 11077 results on 444 pages for 'floppy drive'.

Page 230/444 | < Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >

• Booting Ubuntu 13.10 form USB on server with no OS (Dell PowerEdge T110)

  - by user35581

  I have a Dell PowerEdge T110 (Xeon 1220v2) server with no OS. From my mac, I was able to save the Ubuntu 13.10 for server iso (x86) and used UNetbootin to save the iso to a USB stick (2GB). I was hoping to boot the server from USB, and all seemed to be going well, BIOS even detected my USB drive when I plugged it in, but for some reason I'm getting a "Missing operating system" error. I checked the USB drive and it appears that UNetbootin put the correct files on it form a cursory glance (although I'm not entirely sure what I should be looking for). Should I be able to boot a server with no OS from a UNetbootin created Ubuntu 13.10 USB? And if so, why might BIOS not find the right files? I had read that there is a USB Emulation setting in BIOS, but I haven't been able to find this in the menus. My understanding is that by default, this is set to on. I might try wiping the USB stick and running UNetbootin again. The USB is formatted to MS-DOS FAT16 (should it be formatted some other way?).

  Read the article

• Installing Ubuntu on Asus G75VW (UEFI)

  - by user101653

  You all are my last hope... help! I bought an Asus G75VW from Best Buy. It has the new UEFI BIOS instead of the old style BIOS (1980's) and has Windows 8 preinstalled. I cannot get the G75VW to install Ubuntu 12.10 in EFI mode. I did get Ubuntu to load if I changed the BIOS to CSM and the computer sees and installs Ubuntu in "legacy mode". I attempted boot repair, and Ubuntu will load after 1 minute but as legacy BIOS only. If I changed the BIOS to UEFI "Binary is whitelisted" is displayed and I get a purple screen. My goal... keep my preinstalled Windows 8 on internal drive bay 1 and install Ubuntu 12.10 on internal drive bay 2... and somehow make a choice on which to choose. I am at a loss. I am a software programmer, but I am very bad at understanding BIOS and partitioning. Any ideas? Has anyone done what I want to do. This is a full second day on my "issue"! If I cannot get Ubuntu installed, I'm returning the laptop. And "wait" until these obstacles of UEFI/EFI and properly handled to allow people to load EFI based Ubuntu without a hitch. Thanks, Dave

  Read the article

• How to improve my backup strategy (rsync)?

  - by GUI Junkie

  I've seen the QAs about backup solutions, but I'm asking anyway. One because it's a personal situation I haven't solved yet, and two, because the answer can be useful for others. My situation is rather simple. I have two computers with two users and one external hard-drive. I want to sync/backup a shared directory. Currently I use rsync with the -azvu options to sync to the external drive. My problem is the round-trip. All deleted files are restored! Using rsync I'm doing Computer A --> External disk --> Computer A Computer B --> External disk --> Computer B (I should probably do External disk -- Computer A as a last step) I've seen 'bup' mentioned and other QA talk about dropbox + rsync... Another option is maybe to delete files from rsync? Can my running backup strategy be improved in some other way?

  Read the article

• Ubuntu update deleted entries from grub

  - by Kevin

  My computer currently has Fedora, Ubuntu, and Windows installed. I just updated Ubuntu 12.04, and on restarting, the Fedora entry was gone from GRUB. Ubuntu and Windows remained, though. I have looked at these threads: Fedora login gone after Ubuntu updates on a dual boot http://forums.fedoraforum.org/showthread.php?t=279221 GRUB's menu.lst deleted after a kernel update However, I cannot figure out how to mount the drive as suggested. It does not appear in the list on the left side of nautilus as shown in the links above. I also tried running the following as suggested above: sudo grub-install /dev/sdX sudo update-grub But this gave scary errors: /usr/sbin/grub-setup: warn: Attempting to install GRUB to a partitionless disk or to a partition. This is a BAD idea.. /usr/sbin/grub-setup: warn: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and their use is discouraged.. /usr/sbin/grub-setup: error: will not proceed with blocklists. The highlighted drive below is where Fedora lives. Thanks for any help reversing Ubuntu's decision to delete this from GRUB.

  Read the article

• Cannot Boot, How to recover

  - by Kendor

  Am running 11.10 64-bit with Gnome-shell. Something happened late Friday whereby my machine never gets to the login screen. I do get to an Ubuntu splash logo, after that I get a text screen that it hangs on. The screen is referring to issues with mounting various network resources, including VMWare and also some references to my NAS that are in fstab. If I hit "esc" I can get to the GRUB menu and into recovery console. If I try to do a file system check, I run into a similar error screen that I see when trying to boot normally. A possible clue here is that during my last good session I made some mods to the /etc/hosts file to reference another system which I'm connecting to with Synergy. I don't believe I have hardware issues as I'm able to boot properly with a Live USB and connect to my network/Internet. A few more tidbits. I have regular Dejadups backups on my NAS. I have a good Clonezilla whole drive image which is 4-6 weeks old.. My home is encrypted. I thought I'd try blowing away my hosts file via live USB, but when I mounted the hard drive everything was read-only and I couldn't figure out how to replace it. P.S. I logged in via CLI and modded the host file to remove the entry I'd made, to no avail. System continue to gets stuck on the following: CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel version 3.1s Would love some sober advice on how to attack this.

  Read the article

• accessing live usb files from new hd ubuntu install

  - by Robin Bailey

  After my live USB (ubuntu 12.04 lts) refused to boot, I proceeded to install the same Ubuntu version on the laptop hard drive (a dual boot next to Win xp). This all went well without a hitch. Previous to this, I spent several weeks enjoying and exploring ubuntu from the usb pendrive. During this time I changed lots of settings and customized Firefox and more. Now, I'd like to import the home folder from the usb drive into the new install home folder on the hard disk, which is the purported folder that holds all those special settings to my knowledge. Unfortunately and only being familiar with Windows file systems, the view of the usb file system from the new hdd install is totally perplexing. I can't find anything that looks anywhere close to the original file system. More, I can't find any of the files I had created and stored there, like the LibreOfficeCalc file that has all my passwords (this one is really discouraging) that was stored on the ubuntu desktop. Help me find this file alone and I'll bow down with full apologies to any and all computer gods. Being able to import all those customizing settings into the new install would be a major bonus also, but hey, I'm not greedy. I'll take the passwords file and be happy! And humble! I would be very grateful for some clear, understandable help on this. Thanks

  Read the article

• mount issue in ubuntu 12.10

  - by Vipin Ms

  I'm having issue with latest Ubuntu 12.10. Let me make it more clear. I'm having the following partitions in my Laptop. Device Boot Start End Blocks Id System /dev/sda1 2048 39997439 19997696 83 Linux /dev/sda2 * 40001850 81947564 20972857+ 83 Linux /dev/sda3 81947565 123877214 20964825 83 Linux /dev/sda4 123887614 976773119 426442753 5 Extended /dev/sda5 123887616 333602815 104857600 83 Linux /dev/sda6 333604864 543320063 104857600 83 Linux /dev/sda7 543322112 753037311 104857600 83 Linux /dev/sda8 753039360 976773119 111866880 83 Linux I have also two users named "ms" and abc. Here ms is for administrative tasks and abc for my friends. When I mount any drive under "abc" user, I cannot access it under my other user "ms". Same as in the case with "ms" user. I found possible reason behind the issue. When I mount any drive under "abc" user, Ubuntu will try to mount it under "/media/abc/volume_name" instead of "/media/volume_name" . Same as in the case with "ms" user. # df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 19G 11G 7.5G 59% / udev 1.5G 4.0K 1.5G 1% /dev tmpfs 599M 896K 598M 1% /run none 5.0M 0 5.0M 0% /run/lock none 1.5G 620K 1.5G 1% /run/shm none 100M 92K 100M 1% /run/user /dev/sda2 20G 172M 19G 1% /media/abc/TEST /dev/sdb1 466G 353G 114G 76% /media/abc/F088F74288F7063E /dev/sdb2 466G 318G 148G 69% /media/abc/New Volume /dev/sda5 99G 94G 323M 100% /media/abc/Songs /dev/sda6 99G 31G 63G 34% /media/ms/Films Here, you can see that "TEST" was mounted under "/media/abc/TEST". When I try to access the already mounted partition named '/media/abc/TEST" in my "ms" session I'm getting the following error. How to fix this error? Is it a bug? Is there any way to fix this without modifying the underlying file-system structure?

  Read the article

• How do I remove my Windows 7 setup from a Windows/Ubuntu dual-boot?

  - by Tom

  Previously my OS was Window 7 and some day it began to show problems with booting and finally it didn't boot at all. I tried to repair it but it didn't get repaired. Then I installed Ubuntu 14.04 LTS alongside Windows and am impressed much by Ubuntu. So I want to remove all my Windows files. I searched Google to know how to do it and I found OS-Uninstaller. I have some doubts before proceeding with OS-Uninstaller - I need to keep my photos, songs, movies and personal files in my system even if Windows is removed. Normally Windows files are installed in the C Drive. My personal files are not in the C Drive. So will removing Windows files affect my personal files ? Did the OS-Uninstaller affect Ubuntu anyway ? Please note that I want to remove only the Windows installation files(the files added to my system by Windows during its installation). I don't want to change the NTFS partition to any other format since there is a probability that I will install newer version of Windows later.

  Read the article

• Can't write to disk

  - by nofacts

  I have seen questions similar to this, but the answers are either beyond me or the situation doesn't quite match mine. Would appreciate some direction. I recently installed Ubuntu 12.04 LTS. The OS is on a disk formatted as ext4. I added another disk to the system and formatted it as W95 FAT 32 (LBA) (0x0c). I did this because I am moving from Windows to Linux, will be needing to go back and forth with data for a while, and might need to move the disk to a Windows machine. There may have been a better format to use, but if so I didn't know any better. I was able to transfer data from an external drive to this FAT32 drive with no problem. Now, though, when I try to create a new folder or write a file to the disk I get a message that the disk is read-only. If I go to the properties, permissions for the disk, for Folder Access it says 'create and delete files'. If I try to change File Access underneath to 'read and write', either nothing happens or I get a message it can't be done. Thank you for any help.

  Read the article

• ProStar gaming laptop, which had Ubuntu 10.10, won't boot past Grub. Thoughts?

  - by Richard Zak

  At work we have some high-end gaming laptops we use for their dual GPUs. The machines have second generation i7 CPUs, and came with Windows 7. On most of them I installed Ubuntu 10.10, and all was fine. There were two laptops that I wanted to repurpose and wanted to reinstall the OS. It boots the CD (burned Ubuntu installation CD, I've tried 10.10, 11.10, and 12.04, as well as CentOS 6), and when Grub tried to boot the kernel, I just get a cursor blinking in the upper left corner of the screen. I tried the disabling of ACPI and the other items in the advanced menu, but nothing works. I could still boot to the current Linux installation though. I was able to install Windows 7 again, and use WUBI, but I think that works because it uses the Windows bootloader and not Grub. How could it have worked before and not now? I have confirmed that the CD is fine, as are the hard drive and CD drive. I also had the same problem with Debian, and had to boot through Windows 7 to install it.

  Read the article

• Dual-Boot Problem

  - by user171379

  I have a HP laptop that originally had Windows 7 OS on it, I partioned the drive and allocated 100gb (est.) for the ubuntu install. the install went fine i have ubuntu and windows 7 still on the computer. But I can not get the OS boot screen to show ubuntu as an OS. I can while start up pull up the start menu screen via ESC. Key and press F9 for Boot Device Options and get the boot manager screen and it lists... OS boot manager, Ubuntu (Hitachi HTS 543232A7A384), boot from EFI file, and Notebook Hard Drive... I can boot Ubuntu from this screen by selecting Ubuntu. But i would like to make it easier to access. The computer boot is not for myself otherwise it would not be a problem i would remove windows altogether. I would like to make it basically "User Friendly" if that's at all possible and make the OS boot screen show Ubuntu as a bootable OS as well as Windows 7. on the boot selection screen. Any help on this issue would be greatly appreciated, I've looked to see if i could find the answer and maybe i've overlooked something so here I am. Like i said i need it to be as user friendly as possible and force the user to choose windows 7 or ubuntu not send them into one or the other without them being allowed to choose. I can get any information you might need if necessary but i dont know exactly what you'll need other than what i've given. Ubuntu version is the 13.04 just so you know.

  Read the article

• Ubunto 12.10 Boots to purple screen

  - by Ric

  I know this question has been tackled in a couple different threads but I've tried what I could from those and have not resolved the issue. I have just a basic understanding of this system so feel free to talk down to me or explain this like you would to a 5 year old. Let's start from the beginning. My son has a computer built by an IT friend of mine (we moved so he can't help any more). It had Windows XP running on it and it just stopped working correctly. This same friend had built a laptop for me with Ubuntu which I liked so I thought I'd put a new OS on my sons computer and it may work better. I downloaded Ubuntu 12.10 onto a USB drive and loaded it onto his computer. I followed all the prompts, it installed, I restarted the computer, it gives me the option of which OS to pick. I pick Ubuntu and it seemingly loads. The desktop comes up with just the basic pinkish Ubuntu background but that is it. There are no icons. I can't right click anywhere to create a file. Left clicking the mouse does not create a square when moved. Alt + F2 doesn't do anything. I can open a terminal but any of the commands I have seen in previous threads do not correct any issues. What else can I do, or what resources are available to fix this problem? I don't know if there are additional files on the USB drive that I need to access or what. Also, one of the problems we were having with my sons computer is that windows would only load to a blank screen. It runs accordingly in safemode and my install of Ubuntu was through safemode of Windows XP.

  Read the article

• Dual boot Ubuntu 12.10 and Linux Mint 13

  - by user101693

  I know this question has been asked so many times, but I don't know what should I do in my case with those tutorials available everywhere. This is how my current situation looks like: Right now I'm using Linux Mint 13 Xfce installed with: 500MB of /boot 2GB of swap 15GB of / The rest of my space is /home with no space left in my hard drive And I just got a Ubuntu 12.10 live CD from my friend, and I intended to install it alongside my Linux Mint. And I want to select something else in the installation process. The question is: I want to use the same /home partition for Ubuntu and Linux Mint with same user but different directory because I don't want my configuration files conflict with each other. For example my username is Budiman and I want a directory named /home/budiman-Ubuntu for Ubuntu and /home/budiman-LinuxMint for Linux Mint. How can I do that? I read it somewhere said that I can share /boot and swap with multiple Distro, is it true? How can I make another /root directory for Ubuntu since I don't have any space left in my hard drive? Can I resize the /home partition without losing my data? How can I do that if it's possible? Now I've used 10-20% of my /home partition. I really hope somebody can help me with my question, if possible with a full tutorial starting from install with something else step until completion of the process. Thanks before :)

  Read the article

• HP G42 Ubuntu live cd failure

  - by Jon

  Ok, I have tried every option under the sun. I have surfed through the internet for a good 3 hours straight and to no effect. I installed ubuntu on my HP G42 laptop, it worked fine, then when I tried installing the standard after installation updates my wifi failed. In my attempt to fix my wi-fi I rebooted my laptop, when I rebooted I was stuck on a black screen with nothing that I tried to fix it helping the situation. So I then tried to fix it by reinstalling Ubuntu. When I attempted to boot into the live ccd it failed leaving with the now familar black screen. After numerous attempts using instructions from live cd and instal failure blank screen... page and replacing my hard drive at a cost of $65 I am coming here for help. As for the actual DVD that I tried installing ubuntu from it was able to install ubuntu on a mac just fine after my issues on the HP. After installing the hard drive I loaded up windows just fine but I don't want windows I want ubuntu, can you please provide instructions on how to install ubuntu?

  Read the article

• Spring Cleaning

  - by Tim Dexter

  I recently got a shiny new laptop; moving my shiz from old to new, was not the nightmare it used to be. I have gotten into the habit of using a second hard drive in the media bay where the CDROM normally sits. That drive contains my life's work with BIP. I can pull it out and plug it into another machine very easily. I have been sorting through some old directories and files, archiving some, sharing others with colleagues. For instance, a little dated but if you were looking for a list of Publisher reports available in EBS R12.1, here it is. Im trying to track down a more recent R12 instance and will re-post the document. I also found another gem; its a little out there in terms of usefulness but Im sharing it none the less. You can embed, locally or remotely reference SVG graphics (in XML format) and bring the images into the BIP outputs. Template and sample data here. A nice set of templates showing page number control and page suppression - they will need some explanation, so I'll save them for another post. The list goes on but I'll save them for later. Back to the clean up!

  Read the article

• If I want to dual-boot Ubuntu with another OS, what partitioning method should I use?

  - by Jay

  I have Ubuntu running as a vm in VirtualBox at the moment, but in the future, if I want to dual-boot it with Windows or another OS installed on my hard-drive, what partitioning method should I use to make room for it? 1)Manually partition my hard drive via disk management in Windows (or the equivalent in another OS), making appropriate room for the main partition upon which Ubuntu will be installed and swap space; 2)Partition via the Ubuntu installer options; 3)Use gparted or another free tool like it. I am uncertain as to why I would want to use one over the other. Lastly, am I correct to think that it would be the acme of foolishness to try to partition drives within a virtual machine (since that partitioning would be inherently limited to the limitations set upon it by the virtualization software, e.g., VirtualBox)? Thanks! P.S. Oh, and I am also planning on not modifying the MBR of Windows if I ever do dual-boot with Ubuntu, using instead a piece of free software (like easyBCD or something) to avoid the headaches of Grub being overwritten by a Windows update.

  Read the article

• Layers - Logical seperation vs physical

  - by P.Brian.Mackey

  Some programmers recommend logical seperation of layers over physical. For example, given a DL, this means we create a DL namespace not a DL assembly. Benefits include: faster compilation time simpler deployment Faster startup time for your program Less assemblies to reference Im on a small team of 5 devs. We have over 50 assemblies to maintain. IMO this ratio is far from ideal. I prefer an extreme programming approach. Where if 100 assemblies are easier to maintain than 10,000...then 1 assembly must be easier than 100. Given technical limits, we should strive for < 5 assemblies. New assemblies are created out of technical need not layer requirements. Developers are worried for a few reasons. A. People like to work in their own environment so they dont step on eachothers toes. B. Microsoft tends to create new assemblies. E.G. Asp.net has its own DLL, so does winforms. Etc. C. Devs view this drive for a common assembly as a threat. Some team members Have a tendency to change the common layer without regard for how it will impact dependencies. My personal view: I view A. as silos, aka cowboy programming and suggest we implement branching to create isolation. C. First, that is a human problem and we shouldnt create technical work arounds for human behavior. Second, my goal is not to put everything in common. Rather, I want partitions to be made in namespaces not assemblies. Having a shared assembly doesnt make everything common. I want the community to chime in and tell me if Ive gone off my rocker. Is a drive for a single assembly or my viewpoint illogical or otherwise a bad idea?

  Read the article

• What credentials should I use to access a Windows share?

  - by JMCF125

  H
  i, I have installed Samba and CIFS and all that, followed a bunch of tutorials, but still I can't access a share in the separate Windows 7 machine. Before I could access a share in Ubuntu from Windows, but although now I can't for whatever reason; the error of the attempt to mount the Windows share is the same: 13, asking for credentials (the computer with Windows is off now, but I can add the exact error message later). In /etc/fstab I have: # ... (help info) ... # <file system> <mount point> <type> <options> <dump> <pass> # ... (mounting points that don't matter for the question) ... //192.168.1.2/C\:/Users/Public/Documents /srv/Z\:/ cifs user=guest,password=,uid=1000,iocharset=utf8 0 0 I also tried options such as username=guest,uid=1000,iocharset=utf8 and guest,uid=1000,iocharset=utf8, which, of course, don't work. What user am I supposed to use? (user=user; username=user; my credentials in the Windows and Ubuntu machines do not work, at least with the syntax I tried - similar to this). Even if this worked it's not actually what I want. I wanted to setup an authentication for any one trying to access the drive (it's currently 777, for the Linux share as well) and put a limit/quota on the share's use (as I see Z:on Windows, it allows for the entire C:drive to be filled). Thank you in advance. I'd be glad if you suggested a way to do this even without the last paragraph.

  Read the article

• Unable to log in due to freeze, occasional error message

  - by Xianlin Xiong

  I'm new to Ubuntu. And I have some problems now. I downloaded Ubuntu 11.10 and burned it onto a CD. Then I load it in my conputer, it's easy. But when I finished those and restarted the computer, the problem comes: After I choose to log in the Ubuntu system,the screen stays in pink, and it can't jump into (about 30 min), and then I have no choices but to press Ctrl+Alt+Del to reboot. Another time I choose Ubuntu to log in, it shows on the screen that "BusyBox v1.18.4 ...... built-in shell ...... initramfs". However the Live CD works very well. What’s more, there is a Windows 7 partition on the hard drive. (Windows 7 is also okay.) But I leave more than 20GB on the hard drive to Ubuntu. When I installed Ubuntu, I only made two partitions (swap and /). I don’t know where the problems happened and how to deal with them. And I hope someone can help me out with the troubles.

  Read the article

• How do I turn off PCI devices?

  - by ethana2

  With the purchase of an Intel SSD and 85WHr Li-ion battery and the linking of wifi and bluetooth to my laptop's wireless switch, extensive Intel PowerTop usage, switching from compiz to metacity, stopping of the desktop-couch daemon, removal of Ubuntu One and several other services from my startup, disabling of everything possible in my BIOS, and physical removal of my optical drive, I've gotten my battery life up fairly high, but I think there's still more to be done. Specifically, when I'm in class taking notes, I want to temporarily but completely power down: Ethernet Firewire USB ports SD card reader Optical drive Webcam Sound card PCMCIA slot ..without turning them off in my BIOS like they are now, if possible, because then I have to restart my computer to use any of them. As it stands, I still haven't managed to power down: Firewire USB connection to webcam sound card How do I tell Linux to disable and power down these devices? Is it true that any PCI slot can be physically powered down? My current idle power consumption is 7.9 watts plus the screen. (10.0W at min. brightness) Also, how do I set the screen timeout to ten seconds? gconf editor isn't honoring it when I set it to that. Will switching from nVidia to Nouveau save any significant amount of power?

  Read the article

• No operating system found even when grub2 was reinstalled

  - by Cruzer

  I know there have been many variations on this question and have certainly tried to do my research. I don't really know what I'm doing so I would rather not take risks. I am trying to dual boot xubuntu and windows 7. I started out with xubuntu and just installed windows. Of course, the mbr got overwritten and windows didn't seem to recognize linux. So I booted to the live cd and rewrote the mbr. And of course, now I get the error "No Operating System Found" on startup. I have been following these tutorials to help me out. community.linuxmint.com/tutorial/view/245 unix.stackexchange.com/questions/96977/grub-wont-install ubuntuforums.org/showthread.php?t=2036730 Specifically, I ran these commands: # sdb2 is the partition with xubuntu sudo mount /dev/sdb2 /mnt # sdb1 is my boot partition sudo mount /dev/sdb1 /mnt/boot # not sure what this does, but ran it anyway... for i in /dev /dev/pts /proc /sys /run; do sudo mount -B $i /mnt$i; done sudo chroot /mnt #once chrooted grub-install /dev/sdb update-grub here's a link to my gparted https://www.dropbox.com/s/zpbbzh9z7k1l3pj/gparted.png EDIT--- didn't realize that the drive letters are different in the picture than in my code (its sda in the pic instead of sdb). I have been restarting a lot and sometimes the drive letters change and make my usb into sda.

  Read the article

• Ubuntu live cd : black screen and blinking cursor

  - by IFasel

  I try to install ubuntu 12.04 on my computer. I can get to the purple screen on the live cd but then, if I choose "Installing Ubuntu", I have a black screen with a cursor blinking (and nothing else happens). My PC : acer aspire M3920, CPU i5-2300, 8 Gb RAM, NVIDIA gt 405. What I already tried : I tried with 12.04 and 13.04 daily build I tried with a live usb and with a live dvd I tried the following boot options : nomodset, acpi=off I googled a lot and it seems that it could be a graphic card problem. Do you know any other boot options that I could try ? UPDATE This is not a duplicate : I've tried all the common boot options (nomodeset, noacpi...) and it doesn't change anything. With the option "no splash" (instead of "quiet splash"), I can see what happens before the forever-blinking cursor : [sdg] no caching mode present [sdg] assuming drive cache : write trough ata8.00: excetion Emask 0x52 ... frozen ata8 : SError : { RecovData RecovComm UnrecovData...} ata8.00 : failed command : IDENTIFY PACKET DEVICE ... ata8.00 : status : { DRDY } ata8 : hard resetting link Does somebody know what it means ? N.B. astonishingly, Puppy Linux boots fine (but Debian, Fedora and Ubuntu do not) Solution In fact, it was not a graphic card problem. I had to disconnect the dvd drive and connect it to another free sata connector (I don't really understand why Ubuntu had trouble with this connector and Windows 7 not). After that, everything worked fine.

  Read the article

• How do I upgrade from ubuntu 9.10 to 12.10 on my Acer Aspire 3000

  - by 770

  I had my Acer Aspire 3000 as a dual boot XP/ubuntu 9.10 a couple years ago. I recently blew the dust of it and wanted to upgrade to 7/Ubuntu 12.10 so I began by formatting the Ubuntu side of the partition and apparently damaged the mbr as I could only get black screen with the error message: GRUB loading. error: no such partition grub rescue I then slaved the hdd to my win7 desktop and formatted the entire drive, both sides of the partition then reinstalled it in the Acer and tried to install win7. Upon starting the Acer I got the same error message: GRUB loading. error: no such partition grub rescue I then tried to reinstall Ubuntu 9.10 as I have an Ubuntu produced installation cd. Same result. Next day I received a new battery I had ordered for the Acer. I plugged it and the power supply in and hit the power button just to see if I at least could charge the battery but to my surprise Ubuntu 9.10 began to install, so I let it and it did. Now the hard drive shows 58 gb and 2.5gb partitions neither of which is formatted NTFS for/by windows. I am guessing that the GRUB/mbr was repaired somehow by the Ubuntu reinstallation. My question, should you choose to accept it; How can I get to my goal of dual boot win7/Ubuntu 12.10. I am a beginner and don't know much about linux or the terminology. Thank you for your thoughts and help.

  Read the article

• I cannot change the grub Default item from OS-1, but I can from OS-2 (dual-boot 10.04 on both)

  - by fred.bear

  My 10.04 system (OS-1) got into a tangle the other day, so I installed a second, dual-boot 10.04 (OS-2), so that I could trouble-shoot the hung system... In case it is relevant to my question, I'll mention that since I got OS-1 working again, it has shown a few battle wounds from its ordeal (.. actually the ordeal was mine ... trying to figure it all out ;) ... I lost some custom settings, but not all. (For the curious: the hangup was caused by rsync writing 600 GB to OS-1's 320 GB drive.. The destination drive was unmounted at the time, and rsync dutifully wrote directly to /media/usb_back; filling it to capacity... I have since, ammended my script :) Because the dual-boot MBR was prepared by OS-2, it is first on the grub list.. However, I want OS-1 to be the default OS to boot... From OS-1, I tried two methods to change the grub-menu's defaule OS. eg. Directly editing /etc/default/grub (then update-grub) Running 'Startup Manager' (then update-grub) Neither of these methods had any effect... so I started OS-2, and tried method 1... It worked! Why can I not change the grub menu from OS-1? .. or if it can be done, How?

  Read the article

• One of my VMs went boom using Virtual Box and how it got fixed

  - by Enrique Lima

  I am running an HP Envy 15, 16GB and 500GB (7200 RPM) Hard drive. Had a VM configured from another environment, created the virtual machine config file on Virtual Box, everything seemed ok. Fired it up, and it was  s   l   o   w, it took close to 10 minutes for it to load, and about 5 more to see Windows was in the process of loading before the BSOD.  Thought, maybe, just maybe it will not happen again … oh was I wrong. Frustration had already hit an all time high with this configuration and the number of issues I’ve had. How I did the troubleshooting … The best thing to do (IMO) is to step back, and gather your tools to debug this situation. Tools:  Virtual Box command line tools, Windows Debug. Virtual Box comes with a pretty good set of tools to examine, migrate and overall tasks to deal with VMs. The firs step:  use VBoxManage to prevent the VM from rebooting after the error to get enough time to really dig into the BSOD issue. Command used:   VBoxManage setextradata VMNAME "VBoxInternal/PDM/HaltOnReset" 1 Once this was done, the error reported was an “Inaccessible boot device” coming from a “Stop – 7B” type of error on the BSOD. The issue I had with this, my VM was configured to use a virtual SATA controller, and thought Windows 2008 R2 would handle this fine … again wrong!  Because the integration tools from the other product where wanting to take effect that was throwing everything off. The fix The fix was almost handed to me, edited the configuration for the VM, removed the SATA controller from it, added the virtual hard drive under an IDE controller, boot up and voilà … it works! I was then able to install the Virtual Box guest tools and such, but have decided to favor “keep on working” over “let’s try SATA again”

  Read the article

< Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >