auto versioning - Page 231

Using 3G/UMTS in Mauritius

After some conversation, threads in online forum and mailing lists I thought about writing this article on how to setup, configure and use 3G/UMTS connections on Linux here in Mauritius. Personally, I can only share my experience with Emtel Ltd. but try to give some clues about how to configure Orange as well. Emtel 3G/UMTS surf stick Emtel provides different surf sticks from Huawei. Back in 2007, I started with an E220 that wouldn't run on Windows Vista either. Nowadays, you just plug in the surf stick (ie. E169) and usually the Network Manager will detect the new broadband modem. Nothing to worry about. The Linux Network Manager even provides a connection profile for Emtel here in Mauritius and establishing the Internet connection is done in less than 2 minutes... even quicker. Using wvdial Old-fashioned Linux users might not take Network Manager into consideration but feel comfortable with wvdial. Although that wvdial is primarily used with serial port attached modems, it can operate on USB ports as well. Following is my configuration from /etc/wvdial.conf: [Dialer Defaults]Phone = *99#Username = emtelPassword = emtelNew PPPD = yesStupid Mode = 1Dial Command = ATDT[Dialer emtel]Modem = /dev/ttyUSB0Baud = 3774000Init2 = ATZInit3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0Init4 = AT+cgdcont=1,"ip","web"ISDN = 0Modem Type = Analog Modem The values of user name and password are optional and can be configured as you like. In case that your SIM card is protected by a pin - which is highly advised, you might another dialer section in your configuration file like so: [Dialer pin]Modem = /dev/ttyUSB0Init1 = AT+CPIN=0000 This way you can "daisy-chain" your command to establish your Internet connection like so: wvdial pin emtel And it works auto-magically. Depending on your group assignments (dialout), you might have to sudo the wvdial statement like so: sudo wvdial pin emtel Orange parameters As far as I could figure out without really testing it myself, it is also necessary to set the Access Point (AP) manually with Orange. Well, although it is pretty obvious a lot of people seem to struggle. The AP value is "orange". [Dialer orange]Modem = /dev/ttyUSB0Baud = 3774000Init2 = ATZInit3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0Init4 = AT+cgdcont=1,"ip","orange"ISDN = 0Modem Type = Analog Modem And you are done. Official Linux support from providers It's just simple: Forget it! The people at the Emtel call center are completely focused on the hardware and Mobile Connect software application provided by Huawei and are totally lost in case that you confront them with other constellations. For example, my wife's netbook has an integrated 3G/UMTS modem from Ericsson. Therefore, no need to use the Huawei surf stick at all and of course we use the existing software named Wireless Manager instead of. Now, imagine to mention at the help desk: "Ehm, sorry but what's Mobile Connect?" And Linux after all might give the call operator sleepless nights... Who knows? Anyways, I hope that my article and configuration could give you a helping hand and that you will be able to connect your Linux box with 3G/UMTS surf sticks here in Mauritius.

Read the article

6 Prominent Features of New GMail User Interface

- by Gopinath

GMail’s user interface has got a big make over today and the new user interface is available to everyone. We can switch to the new user interface by click on “Switch to the new look” link available at the bottom right of GMail (If you are on IE 6 or similar type of bad browsers, you will not see the option!). I switched to the new user interface as soon I noticed the link and played with it for sometime. In this post I want to share the prominent features of all new GMail interface. 1. All New Conversations Interface GMail’s threaded conversations is a game changing feature when it was first introduced by Google. For a long time we have not seen much updates to the threaded conversation views. In the new GMail interface, threaded conversation sports a great new look – conversations are always visible in a horizontal fashion as opposed to stack interface of earlier version. When you open a conversation, you get a quick glance of individual thread without expanding the thread. Readability is improved a lot now. Check image after the break 2. Sender Profile Photos In Email Threads Did you observe the above screenshot of conversations view? It has profile images of the participants in the thread. Identifying person of a thread is much more easy. 3. Advanced Search Box Search is the heart of Google’s business and it’s their flagship technology. GMail’s search interface is enhanced to let you quickly find the required e-mails. Also you can create mail filters from the search box without leaving the screen or opening up a new popup. 4. Gmail Automatically Resizing To Fit Multiple Devices There is no doubt that this is post PC era where people started using more of tablets and big screen smartphones than ever. The new user interface of GMail automatically resizes itself to fit the size of screen seamlessly. 5. HD Images For Your Themes, Sourced from iStockphoto Are you bored with minimalistic GMail interface and the few flashy themes? Here comes GMail HD themes backed by stock photographs sourced from iStockPhoto website. If you have a widescreen HD monitor then decorate your inbox with beautiful themes. 6. Resize Labels & Chat Panels Now you got a splitter between Labels & Chat panel that lets resize their height as you prefer. Also Label panel auto expands its height when you mouse over to show you hidden labels if any. Video – overview of new GMail features This article titled,6 Prominent Features of New GMail User Interface, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

Read the article

How the "migrations" approach makes database continuous integration possible

- by David Atkinson

Testing a database upgrade script as part of a continuous integration process will only work if there is an easy way to automate the generation of the upgrade scripts. There are two common approaches to managing upgrade scripts. The first is to maintain a set of scripts as-you-go-along. Many SQL developers I've encountered will store these in a folder prefixed numerically to ensure they are ordered as they are intended to be run. Occasionally there is an accompanying document or a batch file that ensures that the scripts are run in the defined order. Writing these scripts during the course of development requires discipline. It's all too easy to load up the table designer and to make a change directly to the development database, rather than to save off the ALTER statement that is required when the same change is made to production. This discipline can add considerable overhead to the development process. However, come the end of the project, everything is ready for final testing and deployment. The second development paradigm is to not do the above. Changes are made to the development database without considering the incremental update scripts required to effect the changes. At the end of the project, the SQL developer or DBA, is tasked to work out what changes have been made, and to hand-craft the upgrade scripts retrospectively. The end of the project is the wrong time to be doing this, as the pressure is mounting to ship the product. And where data deployment is involved, it is prudent not to feel rushed. Schema comparison tools such as SQL Compare have made this latter technique more bearable. These tools work by analyzing the before and after states of a database schema, and calculating the SQL required to transition the database. Problem solved? Not entirely. Schema comparison tools are huge time savers, but they have their limitations. There are certain changes that can be made to a database that can't be determined purely from observing the static schema states. If a column is split, how do we determine the algorithm required to copy the data into the new columns? If a NOT NULL column is added without a default, how do we populate the new field for existing records in the target? If we rename a table, how do we know we've done a rename, as we could equally have dropped a table and created a new one? All the above are examples of situations where developer intent is required to supplement the script generation engine. SQL Source Control 3 and SQL Compare 10 introduced a new feature, migration scripts, allowing developers to add custom scripts to replace the default script generation behavior. These scripts are committed to source control alongside the schema changes, and are associated with one or more changesets. Before this capability was introduced, any schema change that required additional developer intent would break any attempt at auto-generation of the upgrade script, rendering deployment testing as part of continuous integration useless. SQL Compare will now generate upgrade scripts not only using its diffing engine, but also using the knowledge supplied by developers in the guise of migration scripts. In future posts I will describe the necessary command line syntax to leverage this feature as part of an automated build process such as continuous integration.

Read the article

How to inhibit suspend temporarily?

- by Zorn

I have searched around a bit for this and can't seem to find anything helpful. I have my PC running Ubuntu 12.10 set up to suspend after 30 minutes of inactivity. I don't want to change that, it works great most of the time. What I do want to do is disable the automatic suspend if a particular application is running. How can I do this? The closest thing I've found so far is to add a shell script in /usr/lib/pm-utils/sleep.d which checks if the application is running and returns 1 to indicate that suspend should be prevented. But it looks like the system then gives up on suspending automatically, instead of trying again after another 30 minutes. (As far as I can tell, if I move the mouse, that restarts the timer again.) It's quite likely the application will finish after a couple of hours, and I'd rather my PC then suspended automatically if I'm not using it at that point. (So I don't want to add a call to pm-suspend when the application finishes.) Is this possible? Any advice would be appreciated. Cheers. EDIT: As I noted in one of the comments below, what I actually wanted was to inhibit suspend when my PC was serving files over NFS; I just wanted to focus on the "suspend" part of the question because I already had an idea how to solve the NFS part. Using the 'xdotool' idea given in one of the answers, I have come up with the following script which I run from cron every few minutes. It's not ideal because it stops the screensaver kicking in as well, but it does work. I need to have a look at why 'caffeine' doesn't correctly re-enable suspend later on, then I could probably do better. Anyway, this does seem to work, so I'm including it here in case anyone else is interested. #!/bin/bash # If the output of this function changes between two successive runs of this # script, we inhibit auto-suspend. function check_activity() { /usr/sbin/nfsstat --server --list } # Prevent the automatic suspend from kicking in. function inhibit_suspend() { # Slightly jiggle the mouse pointer about; we do a small step and # reverse step to try to stop this being annoying to anyone using the # PC. TODO: This isn't ideal, apart from being a bit hacky it stops # the screensaver kicking in as well, when all we want is to stop # the PC suspending. Can 'caffeine' help? export DISPLAY=:0.0 xdotool mousemove_relative --sync -- 1 1 xdotool mousemove_relative --sync -- -1 -1 } LOG="$HOME/log/nfs-suspend-blocker.log" ACTIVITYFILE1="$HOME/tmp/nfs-suspend-blocker.current" ACTIVITYFILE2="$HOME/tmp/nfs-suspend-blocker.previous" echo "Started run at $(date)" >> "$LOG" if [ ! -f "$ACTIVITYFILE1" ]; then check_activity > "$ACTIVITYFILE1" exit 0; fi /bin/mv "$ACTIVITYFILE1" "$ACTIVITYFILE2" check_activity > "$ACTIVITYFILE1" if cmp --quiet "$ACTIVITYFILE1" "$ACTIVITYFILE2"; then echo "No activity detected since last run" >> "$LOG" else echo "Activity detected since last run; inhibiting suspend" >> "$LOG" inhibit_suspend fi

Read the article

CodePlex Daily Summary for Monday, October 01, 2012

CodePlex Daily Summary for Monday, October 01, 2012Popular ReleasesD3 Loot Tracker: 1.4.1: This version will automatically save a recording session on application exit if the user didn't stop the current session.CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.2.1001.1): Visual Ribbon Editor 1.2.1001.1 What's New: Ability to hide currently selected tab Password in the connection file is now being encrypted Esc and Enter keyboard keys are now supported in all dialogs Extended width of Prefix and Id fields in New Button and New Group dialogs Minor UI enchancements for Hide Button button Minor UI enchancements for View XML button and dialog File/assembly versioning for executable file Notes: Existing plain-text password will be automatically encrypt...Untangler: Untangler: First version of Untangler application available now.SubExtractor: Release 1029: Feature: Added option to make i and ¡ characters movie-specific for improved OCR on Spanish subs (Special Characters tab in Options) Feature: Allow switch to Word Spacing dialog directly from Spell Check dialog Fix: Added more default word spacings for accented characters Fix: Changed Word Spacing dialog to show all OCR'd characters in current sub Fix: Removed application focus grab during OCR Fix: Tightened HD subs fuzzy logic to reduce false matches in small characters Fix: Improved Arrow k...MCEBuddy 2.x: MCEBuddy 2.2.18: Reccomended download Changelog for 2.2.18 (32bit and 64bit) 1. Added support for checking if Showanalyzer has hung and cancelling it 2. New version of comskip, 0.81.48 3. Speeding up comskip 4. Fixed a build bug in 64bit 2.2.17 5. Added a new comkip.ini, better commercial detection for international channels and less aggressive. Old one has been retained as comskip_old.ini 6. Added support for Audio Offset on Conversion Task page in GUI (this overrides the profiles AudioDelay when specified)Mugen Injection: Mugen Injection 3.0: Added a generic version of the fluent syntax. Big changes in fluent-syntax. Added support to resolve a parameters: - Factory: AnyCustomFunc{T}, AnyCustomFunc{IEnumerable<IInjectionParameters>,T}, AnyCustomFunc{IDictionary<string, object>,T}, AnyCustomFunc{IEnumerable<IInjectionParameters>,IDictionary<string, object>,T} - Lazy: AnyCustomLazy<T> - Binding metadata: ISetting Change binding builders, now you can configure them through the string settings. Increase performance. F...Aggravation: Version 1.0: This version 1.0 release is pretty stable. You need the Silverlight 4 runtime, developer tools, and Experssion Blend 4 installed.Tube++: Tube++ 4.0.0.43: Fix parser for downloading and add new default slate gray styleReadable Passphrase Generator: KeePass Plugin 0.7.1: See the KeePass Plugin Step By Step Guide for instructions on how to install the plugin. Changes Built against KeePass 2.20Windows 8 Toolkit - Charts and More: Beta 1.0: The First Compiled Version of my LibraryCatchThatException: Release 1.0: This is the first relase for CatchThatException library at 29-9-2012CardPlay: a Solitaire Framework for .Net: 0.3.0: Added 5 games: Blockade, Chessboard, Colorado, Sly Fox, TwentyUltraFluid Modeling Suite: Beta 1: This release is experimental but contains a lot of features like: - xml serialization - multiple selection - clipboard copy/cut/paste on context menu There is the debug and the release (recommanded default) versions.PDF.NET: PDF.NET.Ver4.5-OpenSourceCode: PDF.NET Ver4.5 ????，????Web??????。 PDF.NET Ver4.5 Open Source Code,include a sample Web application project.Visual Studio Icon Patcher: Version 1.5.2: This version contains no new images from v1.5.1 Contains the following improvements: Better support for detecting the installed languages The extract & inject commands won’t run if Visual Studio is running You may now run in extract or inject mode The p/invoke code was cleaned up based on Code Analysis recommendations When a p/invoke method fails the Win32 error message is now displayed Error messages use red text Status messages use green textZXing.Net: ZXing.Net 0.9.0.0: On the way to a release 1.0 the API should be stable now with this version. sync with rev. 2393 of the java version improved api better Unity support Windows RT binaries Windows CE binaries new Windows Service demo new WPF demo WindowsCE Hotfix: Fixes an error with ISO8859-1 encoding and scannning of QR-Codes. The hotfix is only needed for the WindowsCE platform.C.B.R. : Comic Book Reader: CBR 0.7: Synthesis since 0.6 : ePUB : Complete refactoring Add a new dedicated feed viewer for opds stream PDF conversion : improved with image merge Make all backstage panel scrollable Integrate the new AvalonDock 2 library. Support multi-document. Library explorer and Table of content are now toolboxes Designer for dynamic books is now mvvm and much better New BrowserForControl Customized xps viewer to suppress toolbars and bind it to cbr commands Add quick start manual and button ...sosoft: sosoft source: sosoft source include alarm clockRawr: Rawr 5.0.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Coevery - Free CRM: Coevery 1.0.0.26: The zh-CN issue has been solved. We also add a project management module.New ProjectsAmazonGlacierGUI - GUI Client for Amazon Glacier | WPF: a GUI client for amazon glacier , Written in .NET 4, C#,WPF,MVVM & RavenDB for storageAthene: UML editor.Basic Helpdesk Application: Develop a simple application to be used in a network environment to aid support staff while working remotely with users to resolve problems in their local PC.CAPTCHA Solver: CSolver, is a CAPTCHA Solver for Simple CAPTCHAs.ComicExt: ComicExt Works with CBZ files decompress them into a folder of the same name and convert them into zip files and vice versa from a single folder.Copy Your Table Storage: Tool to permit copy table storage dotCMS: it is a content management system base on BlogEngine.NET and Ext.NETihongma??: ?????????????????????????，????????????????、??????，?????????????????????????????，??????????????????????。 ??????????????，??????；???????????????，???????Liam F: Basic mathematical functions implemented using AVX/AVX2MVC Solution: MVC Solution, including many mvc best practicesopengltest: opengl testsample project: Testing...Sériethèque: A small tvshow organizer with viewed option, link to addict7ed.com, rename file etc ...SHOIC (SUPER HIGH ORBIT ION CANION): SHOIC (Super Hight Orbit Ion Canion) es una aplicación derivada de LOIC (Low Orbit Ion Canion)SignalRServerTry: signal r trySilverlight Datagrid Plus: Silverlight Datagrid plus adds basic features to the Silverlight toolkit datagrid such as grouping, filtering, new record and formatting of the datagrid.Sitecore Modules: This is a home for all the Sitecore Shared Source modules distributed by 5 Limes. Over time we expect this solution to contain several projects.Spiritual Chanting Utility: A quick media loop utilitySQL Web Studio Pad: A Simple Web Based SQL Management IDE for managing Database objectsStockmarket Simulation: Stockmarket Simulationtest_proj: ok testTISSEAN.NET: This project is based on: TISEAN 3.0.1 Nonlinear Time Series Analysis Rainer Hegger,Holger Kantz, Thomas Schreiber With major contributions by Eckehard OlbrichUntangler: Class hierarchy viewer for .Net assemblyValarmathi Hospital: Patient management.Windows 8 App For SharePoint Online: Windows 8 app to SharePoint 2013 OnlineWPF Anti-DataBinding Anti-DataTemplate Extensions: WPF Anti-DataBinding Anti-DataTemplate Extensions offers a pure C# code-behind (no XAML) approach to working with WPF controls, starting with the WPF ListBox.Yandex Positions Parser: ?????? ??????? ????? ? ?????? ??????? ?? ???????? ???????? ??????.YunCMS: A simple CMS for build protal site.

Read the article

F# and the rose-tinted reflection

- by CliveT

We're already seeing increasing use of many cores on client desktops. It is a change that has been long predicted. It is not just a change in architecture, but our notions of efficiency in a program. No longer can we focus on the asymptotic complexity of an algorithm by counting the steps that a single core processor would take to execute it. Instead we'll soon be more concerned about the scalability of the algorithm and how well we can increase the performance as we increase the number of cores. This may even lead us to throw away our most efficient algorithms, and switch to less efficient algorithms that scale better. We might even be willing to waste cycles in order to speculatively execute at the algorithm rather than the hardware level. State is the big headache in this parallel world. At the hardware level, main memory doesn't necessarily contain the definitive value corresponding to a particular address. An update to a location might still be held in a CPU's local cache and it might be some time before the value gets propagated. To get the latest value, and the notion of "latest" takes a lot of defining in this world of rapidly mutating state, the CPUs may well need to communicate to decide who has the definitive value of a particular address in order to avoid lost updates. At the user program level, this means programmers will need to lock objects before modifying them, or attempt to avoid the overhead of locking by understanding the memory models at a very deep level. I think it's this need to avoid statefulness that has led to the recent resurgence of interest in functional languages. In the 1980s, functional languages started getting traction when research was carried out into how programs in such languages could be auto-parallelised. Sadly, the impracticality of some of the languages, the overheads of communication during this parallel execution, and rapid improvements in compiler technology on stock hardware meant that the functional languages fell by the wayside. The one thing that these languages were good at was getting rid of implicit state, and this single idea seems like a solution to the problems we are going to face in the coming years. Whether these languages will catch on is hard to predict. The mindset for writing a program in a functional language is really very different from the way that object-oriented problem decomposition happens - one has to focus on the verbs instead of the nouns, which takes some getting used to. There are a number of hybrid functional/object languages that have been becoming more popular in recent times. These half-way houses make it easy to use functional ideas for some parts of the program while still allowing access to the underlying object-focused platform without a great deal of impedance mismatch. One example is F# running on the CLR which, in Visual Studio 2010, has because a first class member of the pack. Inside Visual Studio 2010, the tooling for F# has improved to the point where it is easy to set breakpoints and watch values change while debugging at the source level. In my opinion, it is the tooling support that will enable the widespread adoption of functional languages - without this support, people will put off any transition into the functional world for as long as they possibly can. Without tool support it will make it hard to learn these languages. One tool that doesn't currently support F# is Reflector. The idea of decompiling IL to a functional language is daunting, but F# is potentially so important I couldn't dismiss the idea. As I'm currently developing Reflector 6.5, I thought it wise to take four days just to see how far I could get in doing so, even if it achieved little more than to be clearer on how much was possible, and how long it might take. You can read what happened here, and of the insights it gave us on ways to improve the tool.

Read the article

Oracle Social Network and the Flying Monkey Smart Target

- by kellsey.ruppel

Originally posted by Jake Kuramoto on The Apps Lab blog. I teased this before OpenWorld, and for those of you who didn’t make it to the show or didn’t come by the Office Hours to take the Oracle Social Network Technical Tour Noel (@noelportugal) ran, I give you the Flying Monkey Smart Target. In brief, Noel built a target, about two feet tall, which when struck, played monkey sounds and posted a comment to an Oracle Social Network Conversation, all controlled by a Raspberry Pi. He also connected a Dropcam to record the winner just prior to the strike. I’m not sure how it all works, but maybe Noel can post the technical specifics. Here’s Noel describing the Challenge, the Target and a few other tidbit in an interview with Friend of the ‘Lab, Bob Rhubart (@brhubart). The monkey target bits are 2:12-2:54 if you’re into brevity, but watch the whole thing. Here are some screen grabs from the Oracle Social Network Conversation, including the Conversation itself, where you can see all the strikes documented, the picture captured, and the annotation capabilities: #gallery-1 { margin: auto;? } #gallery-1 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 33%; } #gallery-1 img { border: 2px solid #cfcfcf; } #gallery-1 .gallery-caption { margin-left: 0; } That’s Diego in one shot, looking very focused, and Ernst in the other, who kindly annotated himself, two of the development team members. You might have seen them in the Oracle Social Network Hands-On Lab during the show. There’s a trend here. Not by accident, fun stuff like this has becoming our calling card, e.g. the Kscope 12 WebCenter Rock ‘em Sock ‘em Robots. Not only are these entertaining demonstrations, but they showcase what’s possible with RESTful APIs and get developers noodling on how easy it is to connect real objects to cloud services to fix pain points. I spoke to some great folks from the City of Atlanta about extending the concepts of the flying monkey target to physical asset monitoring. Just take an internet-connected camera with REST APIs like the Dropcam, wire it up to Oracle Social Netwok, and you can hack together a monitoring device for a datacenter or a warehouse. Sure, it’s easier said than done, but we’re a lot closer to that reality than we were even two years ago. Another noteworthy bit from Noel’s interview, beginning at 2:55, is the evolution of social developer. Speaking of, make sure to check out the Oracle Social Developer Community. Look for more on the social developer in the coming months. Noel has become quite the Raspberry Pi evangelist, and why not, it’s a great tool, a low-power Linux machine, cheap ($35!) and highly extensible, perfect for makers and students alike. He attended a meetup on Saturday before OpenWorld, and during the show, I heard him evangelizing the Pi and its capabilities to many people. There is some fantastic innovation forming in that ecosystem, much of it with Java. The OTN gang raffled off five Pis, and I expect to see lots of great stuff in the very near future. Stay tuned this week for posts on all our Challenge entrants. There’s some great innovation you won’t want to miss. Find the comments. Update: I forgot to mention that Noel used Twilio, one of his favorite services, during the show to send out Challenge updates and information to all the contestants.

Read the article

Using the SOA-BPM VIrtualBox Appliance

- by antony.reynolds

Quickstart Guide to Using Oracle Appliance for SOA/BPM Recently I have been setting up some machines for fellow engineers. My base setup consists of Oracle Enterprise Linux with Oracle Virtual Box. Note that after installing VirtualBox I needed to add the VirtualBox Extension Pack to enable RDP access amongst other features. In order to get them started quickly with some images I downloaded the pre-built appliance for SOA/BPM from OTN. Out of the box this provides a VirtualBox image that is pre-installed with everything you will need to develop SOA/BPM applications. Specifically by using the virtual appliance I got the following pre-installed and configured. Oracle Enterprise Linux 5 User oracle password oracle User root password oracle. Oracle Database XE Pre-configured with SOA/BPM repository. Set to auto-start on OS startup. Oracle SOA Suite 11g PS2 Configured with a “collapsed domain”, all services (SOA/BAM/EM) running in AdminServer. Listening on port 7001 Oracle BPM Suite 11g Configured in same domain as SOA Suite. Oracle JDeveloper 11g With SOA/BPM extensions. Networking The VM by default uses NAT (Network Address Translation) for network access. Make sure that the advanced settings for port forwarding allow access through the host to guest ports. It should be pre-configured to forward requests on the following ports Purpose Host Port Guest Port (VBox Image) SSH 2222 22 HTTP 7001 7001 Database 1521 1521 Note that only one VirtualBox image can use a given host port, so make sure you are not clashing if it seems not to work. What’s Left to Do? There is still some customization of the environment that may be required. If you need to configure a proxy server as I did then for the oracle and root users to set up an HTTP proxy Added “export http_proxy=http://proxy-host:proxy-port” to ~oracle/.bash_profile and ~root/.bash_profile Added “export http_proxy=http://proxy-host:proxy-port” to /etc/.bashrc Edited System->Preferences to set Network Proxy In Firefox set Preferences->Network->Connection Settings to “Use system proxy settings” In JDeveloper set Edit->Preferences->Web Browser and Proxy to required proxy settings You may need to configure yum to point to a public OEL yum repository – such as http://public-yum.oracle.com. If you are going to be accessing the SOA server from outside the VirtualBox image then you may want to set the soa-infra Server URLs to be the hostname of the host OS. Snap! Once I had the machine configured how I wanted to use it I took a snapshot so that I can always get back to the pristine install I have now. Snapshots are one of the big benefits of putting a development environment into a virtualized environment. I can make changes to my installation and if I mess it up I can restore the image to a last known good snapshot. Hey Presto!, Ready to Go This is the quickest way to get up and running with SOA/BPM Suite. Out of the box the download will work, I only did extra customization so I could use services outside the firewall and browse outside the firewall from within by SOA VirtualBox image. I also use yum to update the OS to the latest binaries. So have fun.

Read the article

i don't receive mail notification...Nagios Core 4

- by alessio

I have a problem with automatically mail notification in Nagios Core 4 installed on ubuntu 12 .04 lts server... i have tried to send mail with nagios user and root user with the command: echo "test" | mail -s "test mail" [email protected] and i received mail correctly... but i don't receive any automatically mail notification... i don't know how can i do to resolve this issue! :( these are my configuration files (commands.cfg, contacts.cfg, nagios.log, mail.log): commands.cfg (the path /usr/bin/mail is the right path): # 'notify-host-by-email' command definition define command{ command_name notify-host-by-email command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$ } # 'notify-service-by-email' command definition define command{ command_name notify-service-by-email command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$ } # 'process-host-perfdata' command definition define command{ command_name process-host-perfdata command_line /usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /usr/local/nagios/var/host-perfdata.out } # 'process-service-perfdata' command definition define command{ command_name process-service-perfdata command_line /usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$\n" >> /usr/local/nagios/var/service-perfdata.out } contacts.cfg: define contact{ contact_name supporto alias Supporto Clienti DEA service_notification_period 24x7 host_notification_period 24x7 service_notification_options w,u,c,r host_notification_options d,r service_notification_commands notify-service-by-email host_notification_commands notify-host-by-email email [email protected] } define contactgroup{ contactgroup_name admins alias Nagios Administrators members supporto } nagios.log: [1401871412] SERVICE ALERT: fileserver;Current Users;OK;SOFT;2;USERS OK - 1 users currently logged in [1401871953] SERVICE ALERT: backups;Nagios Status;WARNING;SOFT;1;NAGIOS WARNING: 36 processes, status log updated 541 seconds ago [1401872133] SERVICE ALERT: backups;Nagios Status;OK;SOFT;2;NAGIOS OK: 36 processes, status log updated 180 seconds ago [1401872321] SERVICE ALERT: posta;Swap Usage;CRITICAL;SOFT;1;CRITICAL - Plugin timed out after 10 seconds [1401872322] SERVICE ALERT: fileserver;Current Users;CRITICAL;SOFT;1;CRITICAL - Plugin timed out after 10 seconds [1401872420] SERVICE ALERT: archivio;Disk Space;CRITICAL;SOFT;1;CRITICAL - Plugin timed out after 10 seconds [1401872492] SERVICE ALERT: fileserver;Current Users;OK;SOFT;2;USERS OK - 1 users currently logged in [1401872492] SERVICE ALERT: posta;Swap Usage;OK;SOFT;2;SWAP OK: 100% free (1984 MB out of 1984 MB) [1401872590] SERVICE ALERT: archivio;Disk Space;OK;SOFT;2;DISK OK [1401872931] Auto-save of retention data completed successfully. [1401873333] SERVICE ALERT: backups;Nagios Status;WARNING;SOFT;1;NAGIOS WARNING: 36 processes, status log updated 402 seconds ago [1401873513] SERVICE ALERT: backups;Nagios Status;OK;SOFT;2;NAGIOS OK: 36 processes, status log updated 180 seconds ago mail.log (i think that the problem is here but i don't know how to resolve it): Jun 4 10:00:01 backups sm-msp-queue[6109]: My unqualified host name (backups) unknown; sleeping for retry Jun 4 10:01:01 backups sm-msp-queue[6109]: unable to qualify my own domain name (backups) -- using short name Jun 4 10:20:01 backups sm-msp-queue[7247]: My unqualified host name (backups) unknown; sleeping for retry Jun 4 10:21:01 backups sm-msp-queue[7247]: unable to qualify my own domain name (backups) -- using short name Jun 4 10:40:01 backups sm-msp-queue[8327]: My unqualified host name (backups) unknown; sleeping for retry Jun 4 10:41:01 backups sm-msp-queue[8327]: unable to qualify my own domain name (backups) -- using short name Jun 4 11:00:01 backups sm-msp-queue[9549]: My unqualified host name (backups) unknown; sleeping for retry Jun 4 11:01:01 backups sm-msp-queue[9549]: unable to qualify my own domain name (backups) -- using short name Jun 4 11:20:01 backups sm-msp-queue[10678]: My unqualified host name (backups) unknown; sleeping for retry Jun 4 11:21:01 backups sm-msp-queue[10678]: unable to qualify my own domain name (backups) -- using short name i'm at the last step and i want to finish this Nagios Core! :) Any help be appreciate!:) host definition (this host have the disk almost full and it is in hard state but non notification) : define host{ use generic-host ; Name of host template to use host_name posta alias Server Posta ESA address 10.10.2.102 parents xen1, xen2 icon_image redhat.png statusmap_image redhat.gd2 } service definition: define service{ use generic-service host_name xen1, maestro, xen2, posta, nas002, serv2, esasrvmi02, esaubuntumi service_description Disk Space check_command ssh_all_disks!10%!5% } Notification is allowed for the contact definition you gave, but is it also allowed at the the service level ? sorry but i don't understand this thing! :(

Read the article

Ubuntu Server 12 not spawning a serial ttyS0 when running on Xen

- by segfaultreloaded

I have this problem on more than one host, so the specific hardware is not an issue. Bare metal Ubuntu 12 is not creating a login process on the only serial port, in the default configuration. The serial port works correctly with the firmware. It works correctly with Grub2. I have even connected the serial line to 2 different external client boxes, so the problem is neither the hardware nor the remote client. When finally booted, the system fails to create the login process. root@xenpro3:~# ps ax | grep tty 1229 tty4 Ss+ 0:00 /sbin/getty -8 38400 tty4 1233 tty5 Ss+ 0:00 /sbin/getty -8 38400 tty5 1239 tty2 Ss+ 0:00 /sbin/getty -8 38400 tty2 1241 tty3 Ss+ 0:00 /sbin/getty -8 38400 tty3 1245 tty6 Ss+ 0:00 /sbin/getty -8 38400 tty6 1403 tty1 Ss+ 0:00 /sbin/getty -8 38400 tty1 1996 pts/0 S+ 0:00 grep --color=auto tty root@xenpro3:~# dmesg | grep tty [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-30-generic root=/dev/mapper/xenpro3-root ro console=ttyS0,115200n8 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-30-generic root=/dev/mapper/xenpro3-root ro console=ttyS0,115200n8 [ 0.000000] console [ttyS0] enabled [ 2.160986] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.203396] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.263296] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.323102] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A root@xenpro3:~# uname -a Linux xenpro3 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux root@xenpro3:~# I have tried putting a ttyS0.conf file in /etc/initab, which solves the problem bare metal but I still cannot get the serial port to work when booting Ubuntu on top of Xen, as domain 0. My serial line output looks like this, when booting Xen /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A * Exporting directories for NFS kernel daemon... [ OK ] * Starting NFS kernel daemon [ OK ] SSL tunnels disabled, see /etc/default/stunnel4 [ 18.654627] XENBUS: Unable to read cpu state [ 18.659631] XENBUS: Unable to read cpu state [ 18.664398] XENBUS: Unable to read cpu state [ 18.669248] XENBUS: Unable to read cpu state * Starting Xen daemons [ OK ] mountall: Disconnected from Plymouth At this point, the serial line is no longer connected to a process. Xen itself is running just fine. Dmesg gives me a long list of [ 120.236841] init: ttyS0 main process ended, respawning [ 120.239717] ttyS0: LSR safety check engaged! [ 130.240265] init: ttyS0 main process (1631) terminated with status 1 [ 130.240294] init: ttyS0 main process ended, respawning [ 130.242970] ttyS0: LSR safety check engaged! which is no surprise because I see root@xenpro3:~# ls -l /dev/ttyS? crw-rw---- 1 root tty 4, 64 Nov 7 14:04 /dev/ttyS0 crw-rw---- 1 root dialout 4, 65 Nov 7 14:04 /dev/ttyS1 crw-rw---- 1 root dialout 4, 66 Nov 7 14:04 /dev/ttyS2 crw-rw---- 1 root dialout 4, 67 Nov 7 14:04 /dev/ttyS3 crw-rw---- 1 root dialout 4, 68 Nov 7 14:04 /dev/ttyS4 crw-rw---- 1 root dialout 4, 69 Nov 7 14:04 /dev/ttyS5 crw-rw---- 1 root dialout 4, 70 Nov 7 14:04 /dev/ttyS6 crw-rw---- 1 root dialout 4, 71 Nov 7 14:04 /dev/ttyS7 crw-rw---- 1 root dialout 4, 72 Nov 7 14:04 /dev/ttyS8 crw-rw---- 1 root dialout 4, 73 Nov 7 14:04 /dev/ttyS9 If I manually change the group of /dev/ttyS0 to dialout, it gets changed back. I have made no changes to the default udev rules, so I cannot see where this problem is coming from. Sincerely, John

Read the article

How to Use Sparklines in Excel 2010

- by DigitalGeekery

One of the cool features of Excel 2010 is the addition of Sparklines. A Sparkline is basically a little chart displayed in a cell representing your selected data set that allows you to quickly and easily spot trends at a glance. Inserting Sparklines on your Spreadsheet You will find the Sparklines group located on the Insert tab. Select the cell or cells where you wish to display your Sparklines. Select the type of Sparkline you’d like to add to your spreadsheet. You’ll notice there are three types of Sparklines, Line, Column, and Win/Loss. We’ll select Line for our example. A Create Sparklines pops up and will prompt you to enter a Data Range you are using to create the Sparklines. You’ll notice that the location range (the range where the Sparklines will appear) is already filled in. You can type in the data range manually, or click and drag with your mouse across to select the data range. This will auto-fill the data range for you. Click OK when you are finished. You will see your Sparklines appear in the desired cells. Customizing Sparklines Select the one of more of the Sparklines to reveal the Design tab. You can display certain value points like high and low points, negative points, and first and last points by selecting the corresponding options from the Show group. You can also mark all value points by selecting Markers. Select your desired Sparklines and click one of the included styles from the Style group on the Design tab. Click the down arrow on the lower right corner of the box to display additional pre-defined styles… or select Sparkline Color or Marker Color options to fully customize your Sparklines. The Axis options allow additional options such as Date Axis Type, Plotting Data Left to Right, and displaying an axis point to represent the zero line in your data with Show Axis. Column Sparklines Column Sparklines display your data in individual columns as opposed to the Line view we’ve been using for our examples. Win/Loss Sparklines Win/Loss shows a basic positive or negative representation of your data set. You can easily switch between different Sparkline types by simply selecting the current cells (individually or the entire group), and then clicking the desired type on the Design tab. For those that may be more visually oriented, Sparklines can be a wonderful addition to any spreadsheet. Are you just getting started with Office 2010? Check out some of our other great Excel posts such as how to copy worksheets, print only selected areas of a spreadsheet, and how to share data with Excel in Office 2010. Similar Articles Productive Geek Tips Convert a Row to a Column in Excel the Easy WayShare Access Data with Excel in Office 2010Make Excel 2007 Print Gridlines In Workbook FileMake Excel 2007 Always Save in Excel 2003 FormatConvert Older Excel Documents to Excel 2007 Format TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7

Read the article

Extract Audio from a Video File with Pazera Free Audio Extractor

- by DigitalGeekery

Have you ever wanted to extract some or all of the audio from a video file? Today we’ll take a look at Pazera Free Audio Extractor. A simple audio converter that specializes in that very task. Download the Pazera Free Audio Extractor. (See download link below) You’ll need to unzip the download folder, but there is no need to install the application. Simply double-click the AudioExtractor.exe file to run the application. To add your video files to the queue to be converted, click on the Add files button at the top left. You can add multiple files to the queue and convert them all at one time. Browse for your video file, and click Open. Your video will be added to the Queue for processing. Under Output directory you can choose to output to a folder of your choice. Outputting to the same folder as the input folder is the default. Pazera Free Audio Extractor includes pre-configured profiles that will simplify the process of choosing conversion settings. To load a profile, choose one from the Profile drop down list and then click the Load button. You can choose to output to MP3, AAC, AC3, WMA, FLAC, OGG or WAV file format. You will see the profile update the Audio settings in the panels at the lower left of the application. If you wish, you may also select your own custom settings. Advanced Settings The Advanced settings can be used if you want to extract only a portion of the the audio, such as a clip of dialog or a song from a movie. To extract only a portion of the audio, set the start time by selecting the Start time offset check box, then entering the time in the video clip where the audio begins. To set the end time, begin by selecting the Duration check box. Now, you can either select the Duration radio button and enter the amount of time for which you would like to extract the audio, or you can select the End time offset radio button and enter the time in the video clip where the audio ends. When you are ready to convert, click the CONVERT button on the menu at the top of the screen. An output box will open and display the conversion progress. When finished, click Close. Now you are ready to enjoy your audio clip. Pazera Free Audio Extractor is a basic audio tool that is easy enough for everyone to use. It runs on Windows only and supports most common video formats including AVI, FLV, MP4, MPG, MOV, 3GP, and WMV. Download Free Audio Extractor 1.3 Similar Articles Productive Geek Tips Eufony Free Audio Player – Resource Gentle Audio PlayerConvert .3GP and .3G2 Files to AVI / MPEG for FreeTurn Off Auto-Play of Audio and Video CDs and DVDs in UbuntuHow to Make/Edit a movie with Windows Movie Maker in Windows VistaEasily Change Audio File Formats with XRECODE TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs

Read the article

Converting from mp4 to Xvid avi using avconv?

- by Ricardo Gladwell

I normally use avidemux to convert mp4s to Xvid AVI for my Philips Streamium SLM5500. Normally I select MPEG-4 ASP (Xvid) at Two Pass with an average bitrate f 1500kb/s for video and AC3 (lav) audio and it converts correctly. However, I'm trying to using avconv so I can automate the process with a script, but when I do this the video stutters and stops playing part way through. I have a suspicion its something to do with a faulty audio conversion. The commands I'm using are as follows: avconv -y -i video.mp4 -pass 1 -vtag xvid -c:a ac3 -b:a 128k -b:v 1500k -f avi /dev/null avconv -y -i video.mp4 -pass 2 -vtag xvid -c:a ac3 -b:a 128k -b:v 1500k -f avi video.avi There is a bewildering array of arguments for avconv. Is there something I'm doing wrong? Is there a way I can script avidemux from a headless server? Please see command line output: $ avconv -y -i video.mp4 -pass 1 -vtag xvid -an -b:v 1500k -f avi /dev/null avconv version 0.8.5-6:0.8.5-0ubuntu0.12.10.1, Copyright (c) 2000-2012 the Libav developers built on Jan 24 2013 14:49:20 with gcc 4.7.2 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'video.mp4': Metadata: major_brand : isom minor_version : 1 compatible_brands: isomavc1 creation_time : 2013-02-04 13:53:38 Duration: 00:44:09.16, start: 0.000000, bitrate: 669 kb/s Stream #0.0(und): Video: h264 (High), yuv420p, 720x404 [PAR 1:1 DAR 180:101], 538 kb/s, 25 fps, 25 tbr, 100 tbn, 50 tbc Metadata: creation_time : 2013-02-04 13:53:38 Stream #0.1(und): Audio: ac3, 44100 Hz, stereo, s16, 127 kb/s Metadata: creation_time : 2013-02-04 13:53:42 [buffer @ 0x7f4c40] w:720 h:404 pixfmt:yuv420p Output #0, avi, to '/dev/null': Metadata: major_brand : isom minor_version : 1 compatible_brands: isomavc1 creation_time : 2013-02-04 13:53:38 ISFT : Lavf53.21.1 Stream #0.0(und): Video: mpeg4, yuv420p, 720x404 [PAR 1:1 DAR 180:101], q=2-31, pass 1, 1500 kb/s, 25 tbn, 25 tbc Metadata: creation_time : 2013-02-04 13:53:38 Stream mapping: Stream #0:0 -> #0:0 (h264 -> mpeg4) Press ctrl-c to stop encoding frame=66227 fps=328 q=2.0 Lsize= 0kB time=2649.16 bitrate= 0.0kbits/s video:401602kB audio:0kB global headers:0kB muxing overhead -100.000000% $ avconv -y -i video.mp4 -pass 2 -vtag xvid -c:a ac3 -b:a 128k -b:v 1500k -f avi video.avi avconv version 0.8.5-6:0.8.5-0ubuntu0.12.10.1, Copyright (c) 2000-2012 the Libav developers built on Jan 24 2013 14:49:20 with gcc 4.7.2 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'video.mp4': Metadata: major_brand : isom minor_version : 1 compatible_brands: isomavc1 creation_time : 2013-02-04 13:53:38 Duration: 00:44:09.16, start: 0.000000, bitrate: 669 kb/s Stream #0.0(und): Video: h264 (High), yuv420p, 720x404 [PAR 1:1 DAR 180:101], 538 kb/s, 25 fps, 25 tbr, 100 tbn, 50 tbc Metadata: creation_time : 2013-02-04 13:53:38 Stream #0.1(und): Audio: ac3, 44100 Hz, stereo, s16, 127 kb/s Metadata: creation_time : 2013-02-04 13:53:42 [buffer @ 0x12b4f00] w:720 h:404 pixfmt:yuv420p Incompatible sample format 's16' for codec 'ac3', auto-selecting format 'flt' [mpeg4 @ 0x12b3ec0] [lavc rc] Using all of requested bitrate is not necessary for this video with these parameters. Output #0, avi, to 'video.avi': Metadata: major_brand : isom minor_version : 1 compatible_brands: isomavc1 creation_time : 2013-02-04 13:53:38 ISFT : Lavf53.21.1 Stream #0.0(und): Video: mpeg4, yuv420p, 720x404 [PAR 1:1 DAR 180:101], q=2-31, pass 2, 1500 kb/s, 25 tbn, 25 tbc Metadata: creation_time : 2013-02-04 13:53:38 Stream #0.1(und): Audio: ac3, 44100 Hz, stereo, flt, 128 kb/s Metadata: creation_time : 2013-02-04 13:53:42 Stream mapping: Stream #0:0 -> #0:0 (h264 -> mpeg4) Stream #0:1 -> #0:1 (ac3 -> ac3) Press ctrl-c to stop encoding Input stream #0:1 frame changed from rate:44100 fmt:s16 ch:2 to rate:44100 fmt:flt ch:2 frame=66227 fps=284 q=2.2 Lsize= 458486kB time=2649.13 bitrate=1417.8kbits/s video:413716kB audio:41393kB global headers:0kB muxing overhead 0.741969%

Read the article

ORA-4031 Troubleshooting

- by [email protected]

QUICKLINK: Note 396940.1 Troubleshooting and Diagnosing ORA-4031 Error Note 1087773.1 : ORA-4031 Diagnostics Tools [Video] Have you observed an ORA-04031 error reported in your alert log? An ORA-4031 error is raised when memory is unavailable for use or reuse in the System Global Area (SGA). The error message will indicate the memory pool getting errors and high level information about what kind of allocation failed and how much memory was unavailable. The challenge with ORA-4031 analysis is that the error and associated trace is for a "victim" of the problem. The failing code ran into the memory limitation, but in almost all cases it was not part of the root problem. Looking for the best way to diagnose? When an ORA-4031 error occurs, a trace file is raised and noted in the alert log if the process experiencing the error is a background process. User processes may experience errors without reports in the alert log or traces generated. The V$SHARED_POOL_RESERVED view will show reports of misses for memory over the life of the database. Diagnostics scripts are available in Note 430473.1 to help in analysis of the problem. There is also a training video on using and interpreting the script data Note 1087773.1. 11g DiagnosabilityStarting with Oracle Database 11g Release 1, the Diagnosability infrastructure was introduced which places traces and core files into a location controlled by the DIAGNOSTIC_DEST initialization parameter when an incident, such as an ORA-4031 occurs. For earlier versions, the trace file will be written to either USER_DUMP_DEST (if the error was caught in a user process) or BACKGROUND_DUMP_DEST (if the error was caught in a background process like PMON or SMON). The trace file contains vital information about what led to the error condition. Note 443529.1 11g Quick Steps to Package and Send Critical Error Diagnostic Information to Support[Video]Oracle Configuration Manager (OCM)Oracle Configuration Manager (OCM) works with My Oracle Support to enable proactive support capability that helps you organize, collect and manage your Oracle configurations.Oracle Configuration Manager Quick Start GuideNote 548815.1: My Oracle Support Configuration Management FAQ Note 250434.1: BULLETIN: Learn More About My Oracle Support Configuration Manager Common Causes/Solutions The ORA-4031 can occur for many different reasons. Some possible causes are: SGA components too small for workload Auto-tuning issues Fragmentation due to application design Bug/leaks in memory allocationsFor more on the 4031 and how this affects the SGA, see Note 396940.1 Troubleshooting and Diagnosing ORA-4031 Error Because of the multiple potential causes, it is important to gather enough diagnostics so that an appropriate solution can be identified. However, most commonly the cause is associated with configuration tuning. Ensuring that MEMORY_TARGET or SGA_TARGET are large enough to accommodate workload can get around many scenarios. The default trace associated with the error provides very high level information about the memory problem and the "victim" that ran into the issue. The data in the default trace is not going to point to the root cause of the problem. When migrating from 9i to 10g and higher, it is necessary to increase the size of the Shared Pool due to changes in the basic design of the shared memory area. Note 270935.1 Shared pool sizing in 10gNOTE: Diagnostics on the errors should be investigated as close to the time of the error(s) as possible. If you must restart a database, it is not feasible to diagnose the problem until the database has matured and/or started seeing the problems again. Note 801787.1 Common Cause for ORA-4031 in 10gR2, Excess "KGH: NO ACCESS" Memory Allocation ***For reference to the content in this blog, refer to Note.1088239.1 Master Note for Diagnosing ORA-4031

Read the article

IE9 Beta

- by Daniel Moth

I've been using Internet Explorer 8 since the early pre-release bits, but I never tried IE9 until today – the day the Beta is available. I downloaded it from here: http://www.beautyoftheweb.com/ The download took longer than what I expected, but I was doing other stuff, so no bother. After coming down, it asked me to reboot my computer. Really hate when apps do that, but I did it anyway. The first time I launched it, it prompted me with a list of add-ons I should disable including the start-up time that I could save fore each one. It even let me configure the prompt so, for example, it won't prompt me again unless an add-on contributes to more than 1 second of the startup time. Cool. First thing I noticed is that the search bar had gone and, as you'd expect, you have to search from the address box. I totally despise this feature. The first thing I've been doing with all versions of IE is to turn off the automatic searching from the address bar and now I have no way of searching if I do that. Ridiculous. The second thing I notice is that the tabs are next to the address bar and cannot be moved to go below it. One word for that decision: appalling (and, no, I didn't accidentally drop an 'e' and added an 'l' in the previous word). The third thing I notice to the right is the favorites button (star icon) and when I click on it, it brings up the favorites explorer under it on the right; then I pin the explorer and it jumps to the left(!). Why move the entry point to this feature to the right instead of leaving it on the left is beyond me (other than wanting to retrain me on what I've been used to for all this time), but the fact that pinning it makes it jump sides is… an "astonishing" design decision. As I browse I notice a little annoying pop up in the bottom left every time I hover over a link; there is no status bar. I correctly guessed to right click at the top and turn on the status bar (which also got rid of the popup thereafter) and while I am at it, I bring back my favorites bar which was hidden by default (and am pleased to see that all my favorites are still there). The next thing I notice, I like: IE9 is fast. No joke, I visit sites and they seem to be loading visibly much faster – try it! Beyond the speed, I am interested to find out what else is new. I searched and found a few good links: What's new in Internet Explorer 9 Internet Explorer 9 Features (check out the links under "Clean") Top Features If you are a developer, check out IE's msdn home for many articles, e.g. this section on Canvas and SVG. Either way: wherever you are, get IE9 Beta now and judge for yourself. If you don't like it, you can always uninstall (which auto-restores the previous version). Comments about this post welcome at the original blog.

Read the article

Use Your Favorite Wallpapers in Windows 7 Starter Edition

- by Asian Angel

If you have Windows 7 Starter Edition installed on your netbook, the default wallpaper can get old. If you are tired of looking at the default wallpaper, then join us today as we look at changing it with Oceanis Change Background Windows 7. Special Notes This information is quoted directly from the website and needs to be kept in mind when using Oceanis Change Background Windows 7: If the Oceanis Change Background Windows 7 program no longer works properly after installing some Windows Updates, then uninstall and reinstall the Oceanis Change Background Windows 7 program to have it run properly again. If you ever do an in-place upgrade to another higher level edition of Windows 7 in the future, then be sure to uninstall this Oceanis Change Background Windows 7 program first to avoid incompatibility issues with it in the new edition of Windows 7. It was designed to only work in Windows 7 Starter edition. Before There it is…the default wallpaper everyone with the Starter Edition gets stuck with. Some people may not mind it, but if you are one of the people who really wants something different then get ready to rejoice. After The install file for Oceanis is contained in a zip file so you will need to unzip it to get started. The install process is quick and simple but you will need to do a system restart afterwards. Once you have restarted your computer this is what your screen will look like…do not panic and think that this is all there is to it. This is just the Starter Screen and can be easily changed… Note: Oceanis will auto-start with Windows each time. Using either the Desktop Icon or the Start Menu Entry, open up the Oceanis Main Window. You will see the set of four default wallpapers shown here. At this point the best thing to do is browse for the appropriate folder where you have all of those wonderful new wallpapers just waiting to be used. Note: We found Stretch to be the best Picture Position setting on our system. For our example we had three ready and waiting. We decided to try out the Wallpaper Slideshow feature first. We chose a time frame and saved our changes. Here are our three wallpapers as they switched through. This can be much more interesting than the default wallpaper. There was only one quirk that we encountered while using the Slideshow Setting. On occasion if we minimized a non-maximized window there would be a leftover partial image in place of the window. Our suggestion? Go with one wallpaper at a time and the settings shown below. These are the settings that we had terrific luck with…Only one picture selected, Picture Position = Stretch, & Change Picture Every = Every Day. Using these settings, the Starter Edition acted just like any of the other editions with regard to wallpaper management. Conclusion If you have grown tired of looking at the default wallpaper in Windows 7 Starter Edition then you will certainly appreciate what Oceanis Change Background Windows 7 can do to fix that problem. For more ways to customize your Windows 7 Started Edition, be sure to to check out how to personalize Windows 7 Starter. Links Download Oceanis Change Background Windows 7 Similar Articles Productive Geek Tips Windows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Awesome Desktop Wallpapers: The Windows 7 EditionHow To Customize Wallpaper in Windows 7 Starter EditionDesktop Fun: Starship Theme WallpapersDesktop Fun: Underwater Theme Wallpapers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals Video Toolbox is a Superb Online Video Editor Fun with 47 charts and graphs Tomorrow is Mother’s Day

Read the article

Start fail VMware-Player 3.1.5 on Ubuntu 12.04 32bit

- by Chris Lee

Install got no problem but at start of VMWare Player it want to compile and exit with this error: "Unable to build kernel module." Thats the log: Jun 05 00:03:36.153: app-3075712704| Log for VMware Workstation pid=3709 version=7.1.5 build=build-491717 option=Release Jun 05 00:03:36.153: app-3075712704| The process is 32-bit. Jun 05 00:03:36.153: app-3075712704| Host codepage=UTF-8 encoding=UTF-8 Jun 05 00:03:36.153: app-3075712704| Logging to /tmp/vmware-root/setup-3709.log Jun 05 00:03:36.284: app-3075712704| modconf query interface initialized Jun 05 00:03:36.284: app-3075712704| modconf library initialized Jun 05 00:03:36.336: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.350: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.371: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.417: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.429: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.521: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.526: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.529: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.533: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.536: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.579: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.583: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.586: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.589: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.593: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.602: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.624: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:39.677: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.689: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.694: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.697: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.701: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.711: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:39.733: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:39.854: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.858: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.862: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.865: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.868: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:40.065: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:40.066: app-3075712704| Building module vmmon. Jun 05 00:03:40.066: app-3075712704| Extracting the sources of the vmmon module. Jun 05 00:03:40.075: app-3075712704| Building module with command: /usr/bin/make -C /tmp/vmware-root/modules/vmmon-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-24-generic-pae/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 Jun 05 00:03:42.016: app-3075712704| Failed to compile module vmmon! Is it a gcc problem ?

Read the article

SPARC T5-4 LDoms for RAC and WebLogic Clusters

- by Jeff Taylor-Oracle

I wanted to use two Oracle SPARC T5-4 servers to simultaneously host both Oracle RAC and a WebLogic Server Cluster. I chose to use Oracle VM Server for SPARC to create a cluster like this: There are plenty of trade offs and decisions that need to be made, for example: Rather than configuring the system by hand, you might want to use an Oracle SuperCluster T5-8 My configuration is similar to jsavit's: Availability Best Practices - Example configuring a T5-8 but I chose to ignore some of the advice. Maybe I should have included an alternate service domain, but I decided that I already had enough redundancy Both Oracle SPARC T5-4 servers were to be configured like this: Cntl 0.25 4 64GB App LDom 2.75 CPU's 44 cores 704 GB DB LDom One CPU 16 cores 256 GB The systems started with everything in the primary domain: # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL NORM UPTIME primary active -n-c-- UART 512 1023G 0.0% 0.0% 11m # ldm list-spconfig factory-default [current] primary # ldm list -o core,memory,physio NAME primary CORE CID CPUSET 0 (0, 1, 2, 3, 4, 5, 6, 7) 1 (8, 9, 10, 11, 12, 13, 14, 15) 2 (16, 17, 18, 19, 20, 21, 22, 23) -- SNIP 62 (496, 497, 498, 499, 500, 501, 502, 503) 63 (504, 505, 506, 507, 508, 509, 510, 511) MEMORY RA PA SIZE 0x30000000 0x30000000 255G 0x80000000000 0x80000000000 256G 0x100000000000 0x100000000000 256G 0x180000000000 0x180000000000 256G # Give this memory block to the DB LDom IO DEVICE PSEUDONYM OPTIONS pci@300 pci_0 pci@340 pci_1 pci@380 pci_2 pci@3c0 pci_3 pci@400 pci_4 pci@440 pci_5 pci@480 pci_6 pci@4c0 pci_7 pci@300/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE1 pci@300/pci@1/pci@0/pci@c /SYS/RCSA/PCIE2 pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0 pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0 pci@340/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE3 pci@340/pci@1/pci@0/pci@c /SYS/RCSA/PCIE4 pci@380/pci@1/pci@0/pci@a /SYS/RCSA/PCIE9 pci@380/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE10 pci@3c0/pci@1/pci@0/pci@e /SYS/RCSA/PCIE11 pci@3c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE12 pci@400/pci@1/pci@0/pci@e /SYS/RCSA/PCIE5 pci@400/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE6 pci@440/pci@1/pci@0/pci@e /SYS/RCSA/PCIE7 pci@440/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE8 pci@480/pci@1/pci@0/pci@a /SYS/RCSA/PCIE13 pci@480/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE14 pci@4c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE15 pci@4c0/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE16 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2 Added an additional service processor configuration: # ldm add-spconfig split # ldm list-spconfig factory-default primary split [current] And removed many of the resources from the primary domain: # ldm start-reconf primary # ldm set-core 4 primary # ldm set-memory 32G primary # ldm rm-io pci@340 primary # ldm rm-io pci@380 primary # ldm rm-io pci@3c0 primary # ldm rm-io pci@400 primary # ldm rm-io pci@440 primary # ldm rm-io pci@480 primary # ldm rm-io pci@4c0 primary # init 6 Needed to add resources to the guest domains: # ldm add-domain db # ldm set-core cid=`seq -s"," 48 63` db # ldm add-memory mblock=0x180000000000:256G db # ldm add-io pci@480 db # ldm add-io pci@4c0 db # ldm add-domain app # ldm set-core 44 app # ldm set-memory 704G app # ldm add-io pci@340 app # ldm add-io pci@380 app # ldm add-io pci@3c0 app # ldm add-io pci@400 app # ldm add-io pci@440 app Needed to set up services: # ldm add-vds primary-vds0 primary # ldm add-vcc port-range=5000-5100 primary-vcc0 primary Needed to add a virtual network port for the WebLogic application domain: # ipadm NAME CLASS/TYPE STATE UNDER ADDR lo0 loopback ok -- -- lo0/v4 static ok -- ... lo0/v6 static ok -- ... net0 ip ok -- ... net0/v4 static ok -- xxx.xxx.xxx.xxx/24 net0/v6 addrconf ok -- .... net0/v6 addrconf ok -- ... net8 ip ok -- -- net8/v4 static ok -- ... # dladm show-phys LINK MEDIA STATE SPEED DUPLEX DEVICE net1 Ethernet unknown 0 unknown ixgbe1 net0 Ethernet up 1000 full ixgbe0 net8 Ethernet up 10 full usbecm2 # ldm add-vsw net-dev=net0 primary-vsw0 primary # ldm add-vnet vnet1 primary-vsw0 app Needed to add a virtual disk to the WebLogic application domain: # format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0t5000CCA02505F874d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02505f874 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD0/disk 1. c0t5000CCA02506C468d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02506c468 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD1/disk 2. c0t5000CCA025067E5Cd0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca025067e5c /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD2/disk 3. c0t5000CCA02506C258d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02506c258 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD3/disk Specify disk (enter its number): ^C # ldm add-vdsdev /dev/dsk/c0t5000CCA02506C468d0s2 HDD1@primary-vds0 # ldm add-vdisk HDD1 HDD1@primary-vds0 app Add some additional spice to the pot: # ldm set-variable auto-boot\\?=false db # ldm set-variable auto-boot\\?=false app # ldm set-var boot-device=HDD1 app Bind the logical domains: # ldm bind db # ldm bind app At the end of the process, the system is set up like this: # ldm list -o core,memory,physio NAME primary CORE CID CPUSET 0 (0, 1, 2, 3, 4, 5, 6, 7) 1 (8, 9, 10, 11, 12, 13, 14, 15) 2 (16, 17, 18, 19, 20, 21, 22, 23) 3 (24, 25, 26, 27, 28, 29, 30, 31) MEMORY RA PA SIZE 0x30000000 0x30000000 32G IO DEVICE PSEUDONYM OPTIONS pci@300 pci_0 pci@300/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE1 pci@300/pci@1/pci@0/pci@c /SYS/RCSA/PCIE2 pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0 pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0 ------------------------------------------------------------------------------ NAME app CORE CID CPUSET 4 (32, 33, 34, 35, 36, 37, 38, 39) 5 (40, 41, 42, 43, 44, 45, 46, 47) 6 (48, 49, 50, 51, 52, 53, 54, 55) 7 (56, 57, 58, 59, 60, 61, 62, 63) 8 (64, 65, 66, 67, 68, 69, 70, 71) 9 (72, 73, 74, 75, 76, 77, 78, 79) 10 (80, 81, 82, 83, 84, 85, 86, 87) 11 (88, 89, 90, 91, 92, 93, 94, 95) 12 (96, 97, 98, 99, 100, 101, 102, 103) 13 (104, 105, 106, 107, 108, 109, 110, 111) 14 (112, 113, 114, 115, 116, 117, 118, 119) 15 (120, 121, 122, 123, 124, 125, 126, 127) 16 (128, 129, 130, 131, 132, 133, 134, 135) 17 (136, 137, 138, 139, 140, 141, 142, 143) 18 (144, 145, 146, 147, 148, 149, 150, 151) 19 (152, 153, 154, 155, 156, 157, 158, 159) 20 (160, 161, 162, 163, 164, 165, 166, 167) 21 (168, 169, 170, 171, 172, 173, 174, 175) 22 (176, 177, 178, 179, 180, 181, 182, 183) 23 (184, 185, 186, 187, 188, 189, 190, 191) 24 (192, 193, 194, 195, 196, 197, 198, 199) 25 (200, 201, 202, 203, 204, 205, 206, 207) 26 (208, 209, 210, 211, 212, 213, 214, 215) 27 (216, 217, 218, 219, 220, 221, 222, 223) 28 (224, 225, 226, 227, 228, 229, 230, 231) 29 (232, 233, 234, 235, 236, 237, 238, 239) 30 (240, 241, 242, 243, 244, 245, 246, 247) 31 (248, 249, 250, 251, 252, 253, 254, 255) 32 (256, 257, 258, 259, 260, 261, 262, 263) 33 (264, 265, 266, 267, 268, 269, 270, 271) 34 (272, 273, 274, 275, 276, 277, 278, 279) 35 (280, 281, 282, 283, 284, 285, 286, 287) 36 (288, 289, 290, 291, 292, 293, 294, 295) 37 (296, 297, 298, 299, 300, 301, 302, 303) 38 (304, 305, 306, 307, 308, 309, 310, 311) 39 (312, 313, 314, 315, 316, 317, 318, 319) 40 (320, 321, 322, 323, 324, 325, 326, 327) 41 (328, 329, 330, 331, 332, 333, 334, 335) 42 (336, 337, 338, 339, 340, 341, 342, 343) 43 (344, 345, 346, 347, 348, 349, 350, 351) 44 (352, 353, 354, 355, 356, 357, 358, 359) 45 (360, 361, 362, 363, 364, 365, 366, 367) 46 (368, 369, 370, 371, 372, 373, 374, 375) 47 (376, 377, 378, 379, 380, 381, 382, 383) MEMORY RA PA SIZE 0x30000000 0x830000000 192G 0x4000000000 0x80000000000 256G 0x8080000000 0x100000000000 256G IO DEVICE PSEUDONYM OPTIONS pci@340 pci_1 pci@380 pci_2 pci@3c0 pci_3 pci@400 pci_4 pci@440 pci_5 pci@340/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE3 pci@340/pci@1/pci@0/pci@c /SYS/RCSA/PCIE4 pci@380/pci@1/pci@0/pci@a /SYS/RCSA/PCIE9 pci@380/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE10 pci@3c0/pci@1/pci@0/pci@e /SYS/RCSA/PCIE11 pci@3c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE12 pci@400/pci@1/pci@0/pci@e /SYS/RCSA/PCIE5 pci@400/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE6 pci@440/pci@1/pci@0/pci@e /SYS/RCSA/PCIE7 pci@440/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE8 ------------------------------------------------------------------------------ NAME db CORE CID CPUSET 48 (384, 385, 386, 387, 388, 389, 390, 391) 49 (392, 393, 394, 395, 396, 397, 398, 399) 50 (400, 401, 402, 403, 404, 405, 406, 407) 51 (408, 409, 410, 411, 412, 413, 414, 415) 52 (416, 417, 418, 419, 420, 421, 422, 423) 53 (424, 425, 426, 427, 428, 429, 430, 431) 54 (432, 433, 434, 435, 436, 437, 438, 439) 55 (440, 441, 442, 443, 444, 445, 446, 447) 56 (448, 449, 450, 451, 452, 453, 454, 455) 57 (456, 457, 458, 459, 460, 461, 462, 463) 58 (464, 465, 466, 467, 468, 469, 470, 471) 59 (472, 473, 474, 475, 476, 477, 478, 479) 60 (480, 481, 482, 483, 484, 485, 486, 487) 61 (488, 489, 490, 491, 492, 493, 494, 495) 62 (496, 497, 498, 499, 500, 501, 502, 503) 63 (504, 505, 506, 507, 508, 509, 510, 511) MEMORY RA PA SIZE 0x80000000 0x180000000000 256G IO DEVICE PSEUDONYM OPTIONS pci@480 pci_6 pci@4c0 pci_7 pci@480/pci@1/pci@0/pci@a /SYS/RCSA/PCIE13 pci@480/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE14 pci@4c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE15 pci@4c0/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE16 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2 Start the domains: # ldm start app LDom app started # ldm start db LDom db started Make sure to start the vntsd service that was created, above. # svcs -a | grep ldo disabled 8:38:38 svc:/ldoms/vntsd:default online 8:38:58 svc:/ldoms/agents:default online 8:39:25 svc:/ldoms/ldmd:default # svcadm enable vntsd Now use the MAC address to configure the Solaris 11 Automated Installation. Database Logical Domain # telnet localhost 5000 {0} ok devalias screen /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@7/display@0 disk7 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p3 disk6 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p2 disk5 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p1 disk4 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p0 scsi1 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0 net3 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0,1 net2 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0 virtual-console /virtual-devices/console@1 name aliases {0} ok boot net2 Boot device: /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0 File and args: 1000 Mbps full duplex Link up Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx WLS Logical Domain # telnet localhost 5001 {0} ok devalias hdd1 /virtual-devices@100/channel-devices@200/disk@0 vnet1 /virtual-devices@100/channel-devices@200/network@0 net /virtual-devices@100/channel-devices@200/network@0 disk /virtual-devices@100/channel-devices@200/disk@0 virtual-console /virtual-devices/console@1 name aliases {0} ok boot net Boot device: /virtual-devices@100/channel-devices@200/network@0 File and args: Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx Repeat the process for the second SPARC T5-4, install Solaris, RAC and WebLogic Cluster, and you are ready to go. Maybe buying a SuperCluster would have been easier.

Read the article

Sprite animation in openGL - Some frames are being skipped

- by Sid

Earlier, I was facing problems on implementing sprite animation in openGL ES. Now its being sorted up. But the problem that i am facing now is that some of my frames are being skipped when a bullet(a circle) strikes on it. What I need : A sprite animation should stop at the last frame without skipping any frame. What I did : Collision Detection function and working properly. PS : Everything is working fine but i want to implement the animation in OPENGL ONLY. Canvas won't work in my case. ------------------------ EDIT----------------------- My sprite sheet. Consider the animation from Left to right and then from top to bottom Here is an image for a better understanding. My spritesheet ... class FragileSquare{ FloatBuffer fVertexBuffer, mTextureBuffer; ByteBuffer mColorBuff; ByteBuffer mIndexBuff; int[] textures = new int[1]; public boolean beingHitFromBall = false; int numberSprites = 20; int columnInt = 4; //number of columns as int float columnFloat = 4.0f; //number of columns as float float rowFloat = 5.0f; int oldIdx; public FragileSquare() { // TODO Auto-generated constructor stub float vertices [] = {-1.0f,1.0f, //byte index 0 1.0f, 1.0f, //byte index 1 //byte index 2 -1.0f, -1.0f, 1.0f,-1.0f}; //byte index 3 float textureCoord[] = { 0.0f,0.0f, 0.25f,0.0f, 0.0f,0.20f, 0.25f,0.20f }; byte indices[] = {0, 1, 2, 1, 2, 3 }; ByteBuffer byteBuffer = ByteBuffer.allocateDirect(4*2 * 4); // 4 vertices, 2 co-ordinates(x,y) 4 for converting in float byteBuffer.order(ByteOrder.nativeOrder()); fVertexBuffer = byteBuffer.asFloatBuffer(); fVertexBuffer.put(vertices); fVertexBuffer.position(0); ByteBuffer byteBuffer2 = ByteBuffer.allocateDirect(textureCoord.length * 4); byteBuffer2.order(ByteOrder.nativeOrder()); mTextureBuffer = byteBuffer2.asFloatBuffer(); mTextureBuffer.put(textureCoord); mTextureBuffer.position(0); } public void draw(GL10 gl){ gl.glFrontFace(GL11.GL_CW); gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glVertexPointer(1,GL10.GL_FLOAT, 0, fVertexBuffer); gl.glEnable(GL10.GL_TEXTURE_2D); if(MyRender.flag2==1){ /** Collision has taken place*/ int idx = oldIdx==(numberSprites-1) ? (numberSprites-1) : (int)((System.currentTimeMillis()%(200*numberSprites))/200); gl.glMatrixMode(GL10.GL_TEXTURE); gl.glTranslatef((idx%columnInt)/columnFloat, (idx/columnInt)/rowFloat, 0); gl.glMatrixMode(GL10.GL_MODELVIEW); oldIdx = idx; } gl.glEnable(GL10.GL_BLEND); gl.glBlendFunc(GL10.GL_SRC_ALPHA, GL10.GL_ONE_MINUS_SRC_ALPHA); gl.glBindTexture(GL10.GL_TEXTURE_2D, textures[0]); //4 gl.glTexCoordPointer(2, GL10.GL_FLOAT,0, mTextureBuffer); //5 gl.glEnableClientState(GL10.GL_TEXTURE_COORD_ARRAY); gl.glDrawArrays(GL10.GL_TRIANGLE_STRIP, 0, 4); //7 gl.glFrontFace(GL11.GL_CCW); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_TEXTURE_COORD_ARRAY); gl.glMatrixMode(GL10.GL_TEXTURE); gl.glLoadIdentity(); gl.glMatrixMode(GL10.GL_MODELVIEW); } public void loadFragileTexture(GL10 gl, Context context, int resource) { Bitmap bitmap = BitmapFactory.decodeResource(context.getResources(), resource); gl.glGenTextures(1, textures, 0); gl.glBindTexture(GL10.GL_TEXTURE_2D, textures[0]); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MIN_FILTER, GL10.GL_LINEAR); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MAG_FILTER, GL10.GL_LINEAR); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_S, GL10.GL_REPEAT); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_T, GL10.GL_REPEAT); GLUtils.texImage2D(GL10.GL_TEXTURE_2D, 0, bitmap, 0); bitmap.recycle(); }

Read the article

SQL SERVER – Partition Parallelism Support in expressor 3.6

- by pinaldave

I am very excited to learn that there is a new version of expressor’s data integration platform coming out in March of this year. It will be version 3.6, and I look forward to using it and telling everyone about it. Let me describe a little bit more about what will be so great in expressor 3.6: Greatly enhanced user interface Parallel Processing Bulk Artifact Upgrading The User Interface First let me cover the most obvious enhancements. The expressor Studio user interface (UI) has had some significant work done. Kudos to the expressor Engineering team; the entire UI is a visual masterpiece that is very responsive and intuitive. The improvements are more than just eye candy; they provide significant productivity gains when developing expressor Dataflows. Operator shape icons now include a description that identifies the function of each operator, instead of having to guess at the function by the icon. Operator shapes and highlighting depict the current function and status: Disabled, enabled, complete, incomplete, and error. Each status displays an appropriate message in the message panel with correction suggestions. Floating or docking property panels provide descriptive tool tips for each property as well as auto resize when adjusting the canvas, without having to search Help or the need to scroll around to get access to the property. Progress and status indicators let you know when an operation is working. “No limit” canvas with snap-to-grid allows automatic sizing and accurate positioning when you have numerous operators in the Dataflow. The inline tool bar offers quick access to pan, zoom, fit and overview functions. Selecting multiple artifacts with a right click context allows you to easily manage your workspace more efficiently. Partitioning and Parallel Processing Partitioning allows each operator to process multiple subsets of records in parallel as opposed to processing all records that flow through that operator in a single sequential set. This capability allows the user to configure the expressor Dataflow to run in a way that most efficiently utilizes the resources of the hardware where the Dataflow is running. Partitions can exist in most individual operators. Using partitions increases the speed of an expressor data integration application, therefore improving performance and load times. With the expressor 3.6 Enterprise Edition, expressor simplifies enabling parallel processing by adding intuitive partition settings that are easy to configure. Bulk Artifact Upgrading Bulk Artifact Upgrading sounds a bit intimidating, but it actually is not and it is a welcome addition to expressor Studio. In past releases, users were prompted to confirm that they wanted to upgrade their individual artifacts only when opened. This was a cumbersome and repetitive process. Now with bulk artifact upgrading, a user can easily select what artifact or group of artifacts to upgrade all at once. As you can see, there are many new features and upgrade options that will prove to make expressor Studio quicker and more efficient. I hope I’m not the only one who is excited about all these new upgrades, and that I you try expressor and share your experience with me. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

Read the article

CodePlex Daily Summary for Sunday, November 06, 2011

CodePlex Daily Summary for Sunday, November 06, 2011Popular ReleasesSelf-Tracking Entity Generator for WPF and Silverlight: Self-Tracking Entity Generator v 0.9.9 Update 2: Self-Tracking Entity Generator v 0.9.9 for Entity Framework 4.0. No change to the self-tracking entity generator v 0.9.9. WPF sample (SchoolSample) is updated with unit testing for both ViewModel and Model classes.SubExtractor: Release 1020: Feature: added "baseline double quotes" character to selector box Feature: added option to save SRT files as ANSI Feature: made "Save Sup files to Source directory" apply to both Sup and Idx source files. Fix: removed SDH text (...) or ... that is split over 2 lines Fix: better decision-making in when to prefix a line with a '-' because SDH was removedAcDown????? - Anime&Comic Downloader: AcDown????? v3.6.1: ?? ● AcDown??????????、??????，??????????????????????，???????Acfun、Bilibili、???、???、???、Tucao.cc、SF???、?????80????，???????????、?????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??????????????，??????????： ??"AcDown?????"????????? ?? v3.6.1?? ??.hlv...Track Folder Changes: Track Folder Changes 1.1: Fixed exception when right-clicking the root nodeKinect Toolbox: Kinect Toolbox v1.1.0.2: This version adds support for the Kinect for Windows SDK beta 2.MapWindow 4: MapWindow GIS v4.8.6 - Final release - 32Bit: This is the final release of MapWindow v4.8. It has 4.8.6 as version number. This version has been thoroughly tested. If you do get an exception send the exception to us. Don't forget to include your e-mail address. Use the forums at http://www.mapwindow.org/phorum/ for questions. Please consider donating a small portion of the money you have saved by having free GIS tools: http://www.mapwindow.org/pages/donate.php What’s New in 4.8.6 (Final release) · A few minor issues have been fixed Wha...Kinect Mouse Cursor: Kinect Mouse Cursor 1.1: Updated for Kinect for Windows SDK v1.0 Beta 2!Coding4Fun Kinect Toolkit: Coding4Fun Kinect Toolkit 1.1: Updated for Kinect for Windows SDK v1.0 Beta 2!Async Executor: 1.0: Source code of the AsyncExecutorMedia Companion: MC 3.421b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) TV Show Resolutions... Fix to show the season-specials.tbn when selecting an episode from season 00. Before, MC would try & load season00.tbn Fix for issue #197 - new show added by 'Manually Add Path' not being picked up. Also made non-visible the same thing in Root Folders...Nearforums - ASP.NET MVC forum engine: Nearforums v7.0: Version 7.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: UI: Flexible layout to handle both list and table-like template layouts. Theming - Visual choice of themes: Deliver some templates on installation, export/import functionality, preview. Allow site owners to choose default list sort order for the forums. Forum latest activity. Visit the project Roadmap for more details. Webdeploy packages sha1 checksum: e6bb913e591543ab292a753d1a16cdb779488c10?????????? - ????????: All-In-One Code Framework ??? 2011-11-02: http://download.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1codechs&DownloadId=216140 ??????，11??，?????20????Microsoft OneCode Sample，????6?Program Language Sample，2?Windows Base Sample，2?GDI+ Sample，4?Internet Explorer Sample?6?ASP.NET Sample。?????????????。 ????，?????。http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 Program Language CSImageFullScreenSlideShow VBImageFullScreenSlideShow CSDynamicallyBuildLambdaExpressionWithFie...Python Tools for Visual Studio: 1.1 Alpha: We’re pleased to announce the release of Python Tools for Visual Studio 1.1 Alpha. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python programming language. This release includes new core IDE features, a couple of new sample libraries for interacting with Kinect and Excel, and many bug fixes for issues reported since the release of 1.0. For the core IDE features we’ve added many new features which improve the basic edit...BExplorer (Better Explorer): Better Explorer 2.0.0.631 Alpha: Changelog: Added: Some new functions in ribbon Added: Possibility to choose displayed columns Added: Basic Search Fixed: Some bugs after navigation Fixed: Attempt to fix slow navigation and slow start Known issues: - BreadcrumbBar fails on some situations - Basic search not work quite well in some situations Please if anyone find bugs be kind and report them at the Issue Tracker! Thanks!DotNetNuke® Community Edition: 05.06.04: Major Highlights Fixed issue with upgrades on systems that had upgraded the Telerik library to 6.0.0 Fixed issue with Razor Host upgrade to 5.6.3 The logic for module administration checks contains incorrect logic in 1 place, opening the possibility of a user with edit permissions gaining access to functionality they should not have through a particularly crafted url Security FixesBrowsers support the ability to remember common strings such as usernames/addresses etc. Code was adde...Terminals: Version 2.0 - Beta 3 Release: Beta 3 Refresh Dont forget to backup your config files BEFORE upgrading! The team has finally put the nail into the official release date for version 2.0. As bugs are winding down on the 2.0 Roadmap we decided to push out another build - the first 2.0 Beta build. Please take time to use and abuse this release. We left logging in place, and this is a debug build so be sure to submit your logs on each bug reported, and please do report all bugs! Check the source code page on the site, th...iTuner - The iTunes Companion: iTuner 1.4.4322: Added German (unverified, apologies if incorrect) Properly source invariant resources with correct resIDs Replaced obsolete lyric providers with working providers Fix Pseudolater to correctly morph every third char Fix null reference in CatalogBaseTumbleDeck: TumbleDeck 1.0.1 Alpha: New version of TumbleDeck is out! Check it out, it's great, we will be testing it and releasing more stable versions all the time. If you spot any unwanted bugs or features you want added please, please, please email us at tumbledeck@mail.com or contact us on the Discussions tab! If you can see your old version of TumbleDeck, please uninstall it and install this version again. Thanks.VidCoder: 1.2.1: Fixed a couple regressions: video encoder was blank in queue and crashes with the High Profile preset when opening the Settings window. Fixed problem with auto-update introduced in 1.2.0. If you have 1.2.0 you will need to update manually to get this.AssaultCube Reloaded: Release 2.3: THE RELEASE YOU'VE ALL BEEN WAITING FOR! IT CAN NOW BE CONSIDERED STABLE Linux has Debian 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, download the Linux package. The server pack is ready for both Windows and Linux, but you might need to compile your own for linux (source included) If you are using Windows and require the source code, download the source package!New ProjectsApploft: Apploft is a new App Platform for windows allowing you to run apps based on powerful code which can pull content from Online.Bugshooting Output for Microsoft Dynamics CRM: Provides an output DLL to use with Bugshooting.Bulk Copy Test Cases Tool for Microsoft Test Manager & TFS: A while ago I had written a blog post Microsoft Test Manager Test Case Versioning on how to manage Test Cases over multiple releases which required you to manually copy test cases individually. I have created a tool to help with the bulk copying of Test Cases that updates the ItDiagnostics Tool for Microsoft Dynamics CRM 2011: Diagnostics Tool for Microsoft Dynamics CRM 2011 helps CRM developers and administrators to enable trace and devErrors on CRM server. It also generates an HTML report file with information about the CRM deployment.Ege University Renewable Energy Society: Ege University Renewable Energy Society Open Source Projectsfirst use of tfs: first project. connection to tfsFlagFtp: FlagFtp is a FTP library for .NET which supports various operations, such as retrieving file lists, write and read from/to files, retrieving file and directory infos, etc...LJCommon: LJCommonnwrole: .Net Worker RoleOrchard Mango Theme: Orchard Mango Theme is a simple inspired Microsoft Windows Phone OS. Original creator and designer Marco Siniscalco (http://www.marcosiniscalco.com)Project Rainbow: This is a school project from KAHO-SL in Belgium, ghent. although this is an open source site, we wish to ask not to copy or steal any of our code if you are related to our school and/or project.Rawler　-The Web scraping Framework using XAML: This is the Web scraping Framework using XAML .This framework makes Web scraping possible by only XAML. TenneySoftware Graphing Calculator: A 2D and 3D graphing calculator inspired by Analog's ZPlotter, utilizing my very own libraries to manage the 2D and 3D plotting. The article from Analog, an 8-bit Atari computer magazine from the 80's, can be located here: http://www.cyberroach.com/analog/an30/ZpltAn30.htmThe GINA bot: under constructionTime To Go: A little handy app that shows you how long you've got left until stuff.Windows Azure WordPress Accelerator: Accelerator to deploy WordPress in Windows AzureWP7 App site template: The WP7 App Site Template is intended to make it easier for Windows Phone 7 developers to market their apps. It's currently a simple one page site template, but any contributions/suggestions welcome.ZViewTV.NET: ZViewTV.NET est un programme de visualisation de flux audio-vidéo. Il a été créé par l'equipe qui à fait ZGuideTV.NET

Read the article

Strange Happenings

- by MOSSLover

There are weeks we go about our life thinking nothing is going to change nothing will happen. Then there are other weeks a billion things happen at once. Friday started off very weird for me. I flew into Atlanta and I met some cool people for another SharePoint event. I had some good conversations. Saturday then hit me and my virtual machine bombed in my presentation after the auto updater ran. I was writing code on the board and describing everything in notepad. I would say as presentations go it was the best and the worst presentation all wrapped into one. The next day I was in Baltimore and I hung out with my aunt which was relatively uneventful and great. Then Monday hit and half my presentations failed or succeeded and my screen freezes so I start describing the code. I was on top of my game until Monday night. On top of the world. I'm exhausted I get into Raleigh and one of the craziest stories of my life happens. So my boss has been renting cars through Priceline this week I got a different company than the other weeks. The company gives me a Ford Focus and I plug in the coordinates on my IPhone where I want go. I head out and then I get to the destination hotel (or I thought I did). I go inside it's the wrong hotel the other one is a few miles away. I walk outside hop into the car and it sounds like a gunshot. Nothing is starting...Am I doing something wrong? No I'm not the car is completely dead in the water. I call the rental car facility and they tell me to call roadside they are closing for the night. Roadside says they can't give me a new car but they can get me a jump then I have to take it up with the facility. They send me a tow truck to give me a jump the guy can't jump the car. He tells me this vehicle was towed about an hour ago. He shows me a copy of a slip from when he towed it. We also notice the rental car company left one of there price scanning guns in the vehicle. I call up roadside and now they are interested in getting me a car because I need to be onsite tomorrow. They get the manager of the facility on the phone he apologizes profusely and he says he'll be there in 10 minutes. About 30 minutes pass and him plus another dude show up with a Ford Escape leather interior. At this point I hand him the gun tell him someone left it in the vehicle and that I'm not so happy with them. I ask them to comp my rental they can't due to Priceline, however if I call him again this week he can get me a voucher. It's about 2 am and I'm ready to get to the hotel I don't make it in the next morning until 10 am. I would say this was a crazy week all forms of technology are trying to tell me something. What I have no idea, but we'll see the outcome soon. I feel so weird tons of change is about to happen. I don't know if it's good or bad. I think this week is some form of omen.

Read the article

CodePlex Daily Summary for Thursday, August 23, 2012

CodePlex Daily Summary for Thursday, August 23, 2012Popular ReleasesARSoft.Tools.Net - C#/.Net DNS client/server, SPF and SenderID Library: 1.7.0: New Features:Strong name for binary release LLMNR client One-shot Multicast DNS client Some new IPAddress extensions Response validation as described in draft-vixie-dnsext-dns0x20-00 Added support for Owner EDNS option (draft-cheshire-edns0-owner-option) Added support for LLQ EDNS option (draft-sekar-dns-llq) Added support for Update Lease EDNS option (draft-sekar-dns-ul) Changes:Updated to latest IANA parameters Adapted RFC6563 - Moving A6 to Historic Status Use IPv6 addre...7zbackup - PowerShell Script to Backup Files with 7zip: 7zBackup v. 1.8.1 Stable: Do you like this piece of software ? It took some time and effort to develop. Please consider a helping me with a donation Or please visit my blog Code : New work switch maxrecursionlevel to limit recursion depth while searching files to backup Code : rotate argument switch can now be set in selection file too Code : prefix argument switch can now be set in selection file too Code : prefix argument switch is checked against invalid file name chars Code : vars script file has now...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.62: Fix for issue #18525 - escaped characters double-escaped in identifiers if the character immediately after the backslash is not normally allowed in an identifier. fixed symbol problem with nuget package. 4.62 should have nuget symbols available again.Game of Life 3D: GameOfLife3D Version 0.5.2: Support Windows 8nopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.65: As some of you may know we were planning to release version 2.70 much later (the end of September). But today we have to release this intermediate version (2.65). It fixes a critical issue caused by a third-party assembly when running nopCommerce on a server with .NET 4.5 installed. No major features have been introduced with this release as our development efforts were focused on further enhancements and fixing bugs. To see the full list of fixes and changes please visit the release notes p...MyRouter (Virtual WiFi Router): MyRouter 1.2.9: . Fix: Some missing changes for fixing the window subclassing crash. · Fix: fixed bug when Run MyRouter at the first Time. · Fix: Log File · Fix: improve performance speed application · fix: solve some Exception.Smart Thread Pool: SmartThreadPool 2.2.2: Release Changes Added set name to threads Fixed the WorkItemsQueue.Dequeue. Replaced while(!Monitor.TryEnter(this)); with lock(this) { ... } Fixed SmartThreadPool.Pipe Added IsBackground option to threads Added ApartmentState to threads Fixed thread creation when queuing many work items at the same time.ZXing.Net: ZXing.Net 0.8.0.0: sync with rev. 2393 of the java version improved API, direct support for multiple barcode decoding, wrapper for barcode generating many other improvements and fixes encoder and decoder command line clients demo client for emguCV dev documentation startedScintillaNET: ScintillaNET 2.5.1: This release has been built from the 2.5 branch. Issues closed: Issue # Title 32524 32524 32550 32550 32552 32552 25148 25148 32449 32449 32551 32551 32711 32711 MFCMAPI: August 2012 Release: Build: 15.0.0.1035 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeDocument.Editor: 2013.2: Whats new for Document.Editor 2013.2: New save as Html document Improved Traslate support Minor Bug Fix's, improvements and speed upsPulse: Pulse Beta 5: Whats new in this release? Well to start with we now have Wallbase.cc Authentication! so you can access favorites or NSFW. This version requires .NET 4.0, you probably already have it, but if you don't it's a free and easy download from Microsoft. Pulse can bet set to start on Windows startup now too. The Wallpaper setter has settings now, so you can change the background color of the desktop and the Picture Position (Tile/Center/Fill/etc...) I've switched to Windows Forms instead of WPF...Metro Paint: Metro Paint: Download it now , don't forget to give feedback to me at maitreyavyas@live.com or at my facebook page fb.com/maitreyavyas , Hope you enjoy it.MiniTwitter: 1.80: MiniTwitter 1.80 ???? ?? .NET Framework 4.5 ?????? ?? .NET Framework 4.5 ????????????? "&" ??????????????????? ???????????????????????? 2 ??????????? ReTweet ?????????????????、In reply to ?????????????? URL ???????????? ??????????????????????????????Droid Explorer: Droid Explorer 0.8.8.6 Beta: Device images are now pulled from DroidExplorer Cloud Service refined some issues with the usage statistics Added a method to get the first available value from a list of property names DroidExplorer.Configuration no longer depends on DroidExplorer.Core.UI (it is actually the other way now) fix to the bootstraper to only try to delete the SDK if it is a "local" sdk, not an existing. no longer support the "local" sdk, you must now select an existing SDK checks for sdk if it was ins...Path Copy Copy: 11.0.1: Bugfix release that corrects the following issue: 11365 If you are using Path Copy Copy in a network environment and use the UNC path commands, it is recommended that you upgrade to this version.ExtAspNet: ExtAspNet v3.1.9.1: +2012-08-18 v3.1.9 -??other/addtab.aspx???JS???BoundField??Tooltip???（Dennis_Liu）。 +??Window?GetShowReference???????????????（︶????、????、???、??~）。 -?????JavaScript?????，??????HTML????????。 -??HtmlNodeBuilder????????????????JavaScript??。 -??????WindowField、LinkButton、HyperLink????????????????????????????。 -???????????grid/griddynamiccolumns2.aspx（?????）。 -?????Type??Reset?????，??????????????????（e??）。 -?????????????????????。 -?????????int,short,double??????????（???）。 +?Window????Ge...AcDown????? - AcDown Downloader Framework: AcDown????? v4.0.1: ?? ●AcDown??????????、??、??????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)，?????"?????????"??? ??????????????，??????????： ??"AcDown?????"????????? ...Fluent Validation for .NET: 3.4: Changes since 3.3: Make ValidationResut.IsValid virtual Add private no-arg ctor to ValidationFailure to help with serialization Add Turkish error messages Work-around for reflection bug in .NET 4.5 that caused VerificationExceptions Assemblies are now unsigned to ease with versioning/upgrades (especially where other frameworks depend on FV) (Note if you need signed assemblies then you can use the following NuGet packages: FluentValidation-signed, FluentValidation.MVC3-signed, FluentV...DotNetNuke® Feedback: 06.02.01: Official Release - 17th August 2012 Please look at the Release Notes file included in the module packages or available on this page as a separate download for a listing of the bug fixes and enhancements found in this version. NOTE: Feedback v 06.02.00 REQUIRES a minimum DotNetNuke framework version of 06.02.00 as well as ASP.Net 3.5 SP1 and MS SQL Server 2005 or 2008 (Express or standard versions). This release brings some enhancements to the module as well as fixing all known bugs. Bug Fi...New ProjectsAD FS 2.0 RelayState Generator: HTML file for generating the RelayState URL string for use with Microsoft's AD FS 2.0 Rollup 2 and higherAtomic: A graphical, reactive, synchronous software development environment that dramatically reduces programming effort and improves team communication.Depixelizing Pixel Arts: This project is an attempt to implement the following Microsoft Research Paper in C#: http://research.microsoft.com/en-us/um/people/kopf/pixelart/Dynamics CRM 2011 Dummy Entity: Using a "Dummy" Entity, this Dynamics 2011 solution provides authenticated REST style calls from a Web Resource to a plug-in to reach back-end resources.ESPAM7mo: Solución q controla el ingreso y salida de bodega de los suministros, realizado por los alumnos del septimo semestre de la carrera de informatica de la ESPAMExisto: Existo is a project aimed at creating an enterprise business collaboration system.Fiddler2 OAuth: Allows for easy OAuth debugging with Fiddler2gView GIS OS Data - ArcMap Extension: Display and edit gView data sources in ArcMap. For example: edit PostGIS data in ArcMap...IronBoard: ReviewBoard Visual Studio extensionJulaDB: C# implementation of an in-memory database engine.JumpingBalls: a wp gameKimola Cloud Search API Client Library for .NET: A C# library that encapsulates all the internal work and let you work with concrete C# objects while developing your search enabled applications.message elgg: It is a plugin for elggTamarillo - OSGI like Service Platform for .NET: This project is based on the OSGI-Framework for Java TFS Project Test Migrator: The goal of this project is to offer a solution to migrate a test plan from a TFS project to another.TFSIntegrate with Outlook: Tool is used to integrate the outlook with TFS. It will attach the emails to the TFS.Time Controller App: ...touch_cloud_game: ?w??w???

Read the article

5.1 surround sound on Acer Aspire 5738ZG with Ubuntu 11.10

- by kbargais_LV

I got a problem with sound. I tried everything but no results. :( I got 3 sound ports. my daemon: # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0

Read the article

Why you shouldn't add methods to interfaces in APIs

- by Simon Cooper

It is an oft-repeated maxim that you shouldn't add methods to a publically-released interface in an API. Recently, I was hit hard when this wasn't followed. As part of the work on ApplicationMetrics, I've been implementing auto-reporting of MVC action methods; whenever an action was called on a controller, ApplicationMetrics would automatically report it without the developer needing to add manual ReportEvent calls. Fortunately, MVC provides easy hook when a controller is created, letting me log when it happens - the IControllerFactory interface. Now, the dll we provide to instrument an MVC webapp has to be compiled against .NET 3.5 and MVC 1, as the lowest common denominator. This MVC 1 dll will still work when used in an MVC 2, 3 or 4 webapp because all MVC 2+ webapps have a binding redirect redirecting all references to previous versions of System.Web.Mvc to the correct version, and type forwards taking care of any moved types in the new assemblies. Or at least, it should. IControllerFactory In MVC 1 and 2, IControllerFactory was defined as follows: public interface IControllerFactory { IController CreateController(RequestContext requestContext, string controllerName); void ReleaseController(IController controller); } So, to implement the logging controller factory, we simply wrap the existing controller factory: internal sealed class LoggingControllerFactory : IControllerFactory { private readonly IControllerFactory m_CurrentController; public LoggingControllerFactory(IControllerFactory currentController) { m_CurrentController = currentController; } public IController CreateController( RequestContext requestContext, string controllerName) { // log the controller being used FeatureSessionData.ReportEvent("Controller used:", controllerName); return m_CurrentController.CreateController(requestContext, controllerName); } public void ReleaseController(IController controller) { m_CurrentController.ReleaseController(controller); } } Easy. This works as expected in MVC 1 and 2. However, in MVC 3 this type was throwing a TypeLoadException, saying a method wasn't implemented. It turns out that, in MVC 3, the definition of IControllerFactory was changed to this: public interface IControllerFactory { IController CreateController(RequestContext requestContext, string controllerName); SessionStateBehavior GetControllerSessionBehavior( RequestContext requestContext, string controllerName); void ReleaseController(IController controller); } There's a new method in the interface. So when our MVC 1 dll was redirected to reference System.Web.Mvc v3, LoggingControllerFactory tried to implement version 3 of IControllerFactory, was missing the GetControllerSessionBehaviour method, and so couldn't be loaded by the CLR. Implementing the new method Fortunately, there was a workaround. Because interface methods are normally implemented implicitly in the CLR, if we simply declare a virtual method matching the signature of the new method in MVC 3, then it will be ignored in MVC 1 and 2 and implement the extra method in MVC 3: internal sealed class LoggingControllerFactory : IControllerFactory { ... public virtual SessionStateBehaviour GetControllerSessionBehaviour( RequestContext requestContext, string controllerName) {} ... } However, this also has problems - the SessionStateBehaviour type only exists in .NET 4, and we're limited to .NET 3.5 by support for MVC 1 and 2. This means that the only solutions to support all MVC versions are: Construct the LoggingControllerFactory type at runtime using reflection Produce entirely separate dlls for MVC 1&2 and MVC 3. Ugh. And all because of that blasted extra method! Another solution? Fortunately, in this case, there is a third option - System.Web.Mvc also provides a DefaultControllerFactory type that can provide the implementation of GetControllerSessionBehaviour for us in MVC 3, while still allowing us to override CreateController and ReleaseController. However, this does mean that LoggingControllerFactory won't be able to wrap any calls to GetControllerSessionBehaviour. This is an acceptable bug, given the other options, as very few developers will be overriding GetControllerSessionBehaviour in their own custom controller factory. So, if you're providing an interface as part of an API, then please please please don't add methods to it. Especially if you don't provide a 'default' implementing type. Any code compiled against the previous version that can't be updated will have some very tough decisions to make to support both versions.

Search Results

Search found 7599 results on 304 pages for 'auto versioning'.

Page 231/304 | < Previous Page | 227 228 229 230 231 232 233 234 235 236 237 238 | Next Page >

- by Gopinath

- by David Atkinson

- by Zorn

- by CliveT

- by kellsey.ruppel

- by antony.reynolds

- by alessio

- by segfaultreloaded

- by DigitalGeekery

- by DigitalGeekery

- by Ricardo Gladwell

- by [email protected]

- by Daniel Moth

- by Asian Angel

- by Chris Lee

- by Jeff Taylor-Oracle

- by Sid

- by pinaldave

- by MOSSLover

- by kbargais_LV

- by Simon Cooper

< Previous Page | 227 228 229 230 231 232 233 234 235 236 237 238 | Next Page >