Search Results

Search found 15819 results on 633 pages for 'django errors'.

Page 231/633 | < Previous Page | 227 228 229 230 231 232 233 234 235 236 237 238  | Next Page >

  • How to retain secondary hard drive mounts at reboot and keep shares?

    - by Tom
    I'm running Ubuntu 12.04. A second hard drive connected to this computer does not mount when the computer boots. Additionally, I have set up the drive to be shared but the share is not retained, the share is lost after each boot. My main system drive and a removable drive mount OK and shares remain between boots. Additional information follows: D2Linux sda1 is the secondary hard drive L-Freeagent sdc1 is the removeable drive Here is the contents of fstab immediately after booting (D2Linux /dev/sda1 not yet mounted): '# /etc/fstab: static file system information. ' '# ' '# Use 'blkid' to print the universally unique identifier for a ' '# device; this may be used with UUID= as a more robust way to name devices ' '# that works even if disks are added and removed. See fstab(5). ' '# ' '# ' proc /proc proc nodev,noexec,nosuid 0 0 '# / was on /dev/sdb1 during installation ' UUID=43d29a82-66b3-40f3-91ed-735a27a60004 / ext4 errors=remount-ro 0 1 '# swap was on /dev/sdb5 during installation UUID=cf8e3351-11d0-487a-8a6e-e499c2e88a10 none swap sw ' 0 0 Here is the output of mount with all drives mounted (I did not restore the share): /dev/sdb1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/tom/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=tom) /dev/sdc1 on /media/L-Freeagent type ext4 (rw,nosuid,nodev,uhelper=udisks) /dev/sda1 on /media/D2Linux type ext4 (rw,nosuid,nodev,uhelper=udisks) Thank you!

    Read the article

  • DVD-drive detected by BIOS and UEFI but not by Ubuntu 12.04

    - by user97591
    I have build a new tower containing; Asrock Z77 extreme4 (motherboard) Core i7 (processor) Hitachi LGE-DMGH 12 L (B) GH15F SATA (SATA DVD-drive) Problem is; BIOS and UEFI has no problems detecting the DVD-drive but it is not detected by Ubuntu 12.04. It is not present in /etc/fstab or /etc/mtab. Below is the contents of fstab and mtab. Thanks for all your help. fstab: # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=f007bc60-da4c-4f36-99a7-77083c5f3654 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=5d59949c-aed9-442a-877d-5abf1ccaadc3 none swap sw 0 0 mtab: /dev/sda1 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/tom/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=tom 0 0

    Read the article

  • How To Check If a Transaction Related to Oracle Asset Tracking Has Been Accounted in SLA

    - by LuciaC-Oracle
    In Oracle Asset Tracking (OAT), we often see situations where a pending transaction has failed to be processed by the OAT programs. Typical situations can be: a pending transaction errors with "Unable to derive accounts from sub ledger accounting for the material transaction" a transaction is not picked by OAT programs. The Create Accounting program log file will show error messages and possible corrective actions to solve the error.  But as this is usually a scheduled program, often any errors that are reported are missed by users. To aid OAT users to identify if a transaction has failed and accounting has not been created, we have now created a SQL script which can be run for any pending transaction: How To Check If a Transaction Related to Oracle Asset Tracking Has Been Accounted in SLA ? (Doc ID 1673414.1)Using the script in this note, the user can pass the material transaction ID for the related transaction and the script will check if SLA accounting entries have been created for this specific transaction or not.If the SLA accounting entries have not been created, the script will prompt the user to run Create Accounting program.  After Create Accounting has been run, the user can run the script again to confirm that accounting has been created.

    Read the article

  • BCM2046B1 Bluetooth Dongle connection problem

    - by Andfoy
    Well i have a Blueooth dongle with an BCM2046 IC intrregated, my problem is that when i connect it, Ubuntu recognize it, but it don't work whe i try to scan or scan the PC from other device, i replaced the default Gnome Bluetooth manager and i installed Blueman, but the problem presists. The Bluetooth LED indicator appears to be "working". I'm using 11.10 Oneiric Ocelot hcitool dev: Devices: hci0 89:21:XX:XX:XX:XX lsusb: Bus 002 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 002 Device 004: ID 0a5c:2100 Broadcom Corp. Bluetooth 2.0+eDR dongle hciconfig -a: hci0: Type: BR/EDR Bus: USB BD Address: 89:21:XX:XX:XX:XX ACL MTU: 1017:8 SCO MTU: 64:0 UP RUNNING PSCAN ISCAN RX bytes:1329 acl:0 sco:0 events:40 errors:0 TX bytes:671 acl:0 sco:0 commands:35 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x4a0100 Service Classes: Networking, Capturing, Telephony Device Class: Computer, Uncategorized HCI Version: 2.0 (0x3) Revision: 0x4000 LMP Version: 2.0 (0x3) Subversion: 0x430e Manufacturer: Broadcom Corporation (15) Sorry for my English and thanks for any hints.

    Read the article

  • There's IP but can't reach gateway

    - by icky
    I have just installed ubuntu 12.04 on my new laptop, and brought it back to home, but I found the wireless network does not work. Strangely, it has the correct ip, but can't connect to the gateway. ifconfig gives ip 192.168.64.36, with broadcast 192.168.79.255 and mask 255.255.240.0, this are all correct, the gateway is at 192.168.64.1 cat /etc/resolv.conf nameserver 192.168.64.1 nameserver 127.0.0.1 which i think it's also right. but when I ping 192.168.64.1, all packages are lost. Please help me with this, I really do not know what happened to my network settings. Huckle, Thank you for your reply ifconfig wlan0 Link encap:Ethernet Hwaddr 88:f9:af:2a:ca:1b inet addr:192.168.64.36 Bcast:192.168.79.255 Mask:255.255.240.0 inet6 addr: fe80::8a9f:faff:fea2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:376 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3950 TX byetes:60288 iwconfig wlan0 IEEE 802.11bgn ESSID:"Chiono" Mode:Managed Frequency:2.417 GHz Access Point: 82:54:99:94:6D:43 Bit Rate=13.5 Mb/s Tx-Power=13 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=70/70 Signal Level=-32 dBm Rx invalid nwid:0 Rx invalid crypt:0 RX invalid frag:0 Tx excessive retries: 9 Invalid misc:10 Missed beacon:0 route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.64.1 0.0.0.0 UG 0 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.64.0 * 255.255.240.0 U 2 0 0 0 wlan0 Thank you very much

    Read the article

  • Do large number of internal broken links affect SEO?

    - by TheBigK
    We've a WordPress blog and had disqus plugin in stalled for several months. Around late August this year, the plugin created a ton of URLs that linked to non-existent location on our website. For example - Correct URL: domain.com/correct-URL/ Disqus created - domain.com/correct-URL/344322/ - Throws 404 domain.com/correct-URL/433466/ - Throws 404 So essentially, Google found a LARGE number of broken links that pointed to unknown locations on our own domain. As the count of those errors (404) rose, our site suffered massive drop in traffic and crawl rate dropped to 10% of what it was earlier. I wish to know - Can large number of (we've over 99k of them) internal broken links cause rankings to drop? I've fixed the issue in one go by creating 301 redirects for each bad URL to correct URL and removing disqus. Google however drops the count by ~1000 daily, as I mark errors as 'fixed' in Google Webmaster Tools. Is there any way to speed this up? Should I setup custom crawl rate to 'Fast' in GWT to make Google crawl our website faster? I'd appreciate your inputs and experience sharing.

    Read the article

  • ksoftirqd uses 100% cpu

    - by andy
    I am running 32bit Ubuntu 10.04. A lot of the times ksoftirqd/0 or ksoftirqd/1 start using up 100% CPU for no apparent reason, and I am forced to reboot my laptop. Incidentally this also happens when I maximize my (youtube) videos on Chrome and Fireox, but once I un-maximize the videos the CPU usage goes down to the original levels. Any ideas what it going on? --- Addendum --- dmesg produces a ~2000 line output. I searched for 'error' and 'warning' in the output, and here are the relevant lines (along with some headers): [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=157dcfda-acd6-4d1b-a6a8-ff9ccff61906 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 24.775546] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended [44920.210518] ata1: SError: { PHYRdyChg CommWake 10B8B Dispar LinkSeq TrStaTrns } [44920.210531] res 40/00:00:f0:4b:7f/00:00:18:00:00/40 Emask 0x10 (ATA bus error) [58673.134623] chrome[20101]: segfault at 7f38bc4ad000 ip 00007f38be769ecc sp 00007fff24616850 error 4 in libpepflashplayer.so[7f38bdc08000+e55000] [ 24.775546] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended [44920.210531] res 40/00:00:f0:4b:7f/00:00:18:00:00/40 Emask 0x10 (ATA bus error)

    Read the article

  • Can't update packages or use Ubuntu Software Center (E: Some index files failed to download. They have been ignored, or old ones used instead.)

    - by user94189
    I get the following errors when trying to run the auto Update Manager Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message: 'E:Encountered a section with no Package: header, E:Problem with MergeList /var/lib/apt/lists/ppa.launchpad.net_bugs-sehe_zfs-fuse_ubuntu_dists_precise_main_binary-amd64_Packages, E:The package lists or status file could not be parsed or opened.' When I run sudo apt-get update, I get these errors W: GPG error: http://us.archive.ubuntu.com precise Release: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key <[email protected]> W: GPG error: http://ppa.launchpad.net precise Release: The following signatures were invalid: BADSIG 1FFD34C9EB13C954 Launchpad CoverGloobus W: GPG error: http://ppa.launchpad.net precise Release: The following signatures were invalid: BADSIG 4A67F94CBF965FF5 Launchpad PPA for Happy-Neko W: Failed to fetch http://ppa.launchpad.net/bugs-sehe/zfs-fuse/ubuntu/dists/precise/main/source/Sources 404 Not Found W: Failed to fetch http://ppa.launchpad.net/bugs-sehe/zfs-fuse/ubuntu/dists/precise/main/binary-amd64/Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/bugs-sehe/zfs-fuse/ubuntu/dists/precise/main/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead.

    Read the article

  • Internet unusably slow with Realtek Semiconductor Co., Ltd. RTL8111/8168B card

    - by user42424
    So I have recently installed Ubuntu 11.10 for a dual boot with wind 7. After the install I had like 300 updates, so I installed them. At first I could use the internet, although it was extremely slow. However now I cannot, sometimes it will load and others it will simply time out. When I try to download something it will either take forever or will not at all. This is a wired system. On Windows side my speeds are fine. Any help would be greatly appreciated. Also like I said I am new to Linux/Ubuntu so please be nice. One last thing, I also installed 11.10 for same dual boot on my laptop, and wireless speed is the same as on Windows? Only the wired desktop gives me the problem? Hear is some hardware info.. Hope it helps. Mobo: Gigabyte GA=880GMA- AMD / CPU: AMD Phenom (tm) IIx4 965 / 16 GB Ram / Realtek PCIe GBE Family Controller / Cisco Linksys E2000 / Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) / eth0 Link encap:Ethernet HWaddr 50:e5:49:33:64:cf inet addr:192.168.1.118 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::52e5:49ff:fe33:64cf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:76722 errors:0 dropped:76722 overruns:0 frame:76722 TX packets:49692 errors:0 dropped:65 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:107956638 (107.9 MB) TX bytes:4342553 (4.3 MB) Interrupt:44 Base address:0x2000 thanks to roadmr problem solved! I powered down PC, un plugged power from pc end, waited a few (maybe 3)minutes. plugged power back in, pushed and held power button for 30 + seconds. Let go, powered on PC, and my Internet is fine! downloads and web speed blaze, just like on my Win 7 boot, maybe even faster. Problem Solved, Thanks to all!! **

    Read the article

  • Is error suppression acceptable in role of logic mechanism?

    - by Rarst
    This came up in code review at work in context of PHP and @ operator. However I want to try keep this in more generic form, since few question about it I found on SO got bogged down in technical specifics. Accessing array field, which is not set, results in error message and is commonly handled by following logic (pseudo code): if field value is set output field value Code in question was doing it like: start ignoring errors output field value stop ignoring errors The reasoning for latter was that it's more compact and readable code in this specific case. I feel that those benefits do not justify misuse (IMO) of language mechanics. Is such code is being "clever" in a bad way? Is discarding possible error (for any reason) acceptable practice over explicitly handling it (even if that leads to more extensive and/or intensive code)? Is it acceptable for programming operators to cross boundaries of intended use (like in this case using error handling for controlling output)? Edit I wanted to keep it more generic, but specific code being discussed was like this: if ( isset($array['field']) ) { echo '<li>' . $array['field'] . '</li>'; } vs the following example: echo '<li>' . @$array['field'] . '</li>';

    Read the article

  • Software Center - Items cannot be installed or removed until package catalog is repaired"

    - by Stephanie
    I tried to install back in time and now I keep getting the message 'items cannot be installed or removed until package catalog is repaired. I have tried sudo apt-get install -f then get Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: backintime-gnome The following packages will be upgraded: backintime-gnome 1 upgraded, 0 newly installed, 0 to remove and 2 not upgraded. 1 not fully installed or removed. Need to get 0 B/39.4 kB of archives. After this operation, 24.6 kB of additional disk space will be used. Do you want to continue [Y/n]? when I click Y, I get the following message dpkg: dependency problems prevent configuration of backintime-gnome: backintime-gnome depends on backintime-common (= 1.0.7); however: Version of backintime-common on system is 1.0.8-1. dpkg: error processing backintime-gnome (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: backintime-gnome E: Sub-process /usr/bin/dpkg returned an error code (1) stephanie@stephanie-ThinkPad-T61:~$ sudo dpkg --configure -a dpkg: dependency problems prevent configuration of backintime-gnome: backintime-gnome depends on backintime-common (= 1.0.7); however: Version of backintime-common on system is 1.0.8-1. dpkg: error processing backintime-gnome (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: backintime-gnome

    Read the article

  • Enterprise Portal Issue with the Ax Demo VPCs

    - by ssmantha
    Microsoft’s Ax Demo VPC is basically configured for a static IP address 192.168.0.1, this is due to the fact that the VPC has Domain Controlller configured in it which requires a static IP. When we put this VPC on a network with a different subnet and change the IP you can observer that the site http://sharepoint and http://sharepoint/EP cease to function and show “Page Not Found” errors in the browser. This is mainly due to the DNS configuration which is not updated. Below is the screen shot of the changes that needs to be done to make the site functioning properly. Change the following entries in the Forward Lookup Zones of DNS management: These websites default, SharePoint and projectserver are all mapped to a single port in the IIS i.e. port number 80. These websites are recognised with host headers. These host headers are configured in DNS with incorrect IP address entries in DNS when you change the IP address of the VPC. Just change these values to point to the Local Loop Adapter (127.0.0.1) and change the DNS to point to this address in the TCP/IP properties as shown below: This will resolve the issue with the website rendering. Initially you may get time out errors while browsing these website. be patient and try again this would work.

    Read the article

  • Partition does not start on physical sector boundary?

    - by jasmines
    I've one HD on my laptop, with two partitions (one ext3 with Ubuntu 12.04 installed and one swap). fdisk is giving me a Partition 1 does not start on physical sector boundary warning. What is the cause and do I need to fix it? If so, how? This is sudo fdisk -l: Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 testine, 63 settori/tracce, 91201 cilindri, totale 1465149168 settori Unità = settori di 1 * 512 = 512 byte Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Identificativo disco: 0x5a25087f Dispositivo Boot Start End Blocks Id System /dev/sda1 * 63 1448577023 724288480+ 83 Linux Partition 1 does not start on physical sector boundary. /dev/sda2 1448577024 1465147391 8285184 82 Linux swap / Solaris This is sudo lshw related result: *-disk description: ATA Disk product: WDC WD7500BPKT-0 vendor: Western Digital physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WX21CC1T0847 size: 698GiB (750GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=5a25087f *-volume:0 description: EXT3 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: cc5c562a-bc59-4a37-b589-805b27b2cbd7 size: 690GiB capacity: 690GiB capabilities: primary bootable journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-27 09:18:28 filesystem=ext3 modified=2012-06-23 18:33:59 mount.fstype=ext3 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered mounted=2012-06-28 00:20:47 state=mounted *-volume:1 description: Linux swap volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 1 serial: 16a7fee0-be9e-4e34-9dc3-28f4eeb61bf6 size: 8091MiB capacity: 8091MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 These are related /etc/fstab lines: UUID=cc5c562a-bc59-4a37-b589-805b27b2cbd7 / ext3 errors=remount-ro,user_xattr 0 1 UUID=16a7fee0-be9e-4e34-9dc3-28f4eeb61bf6 none swap sw 0 0

    Read the article

  • hd0 out of disk error results to low graphics mode

    - by msPeachy
    Yesterday, I have reinstalled Ubuntu due to a error: hd0 out of disk on boot. Everything went fine, I've installed apps, perform updates and upgraded the kernel. I've even restarted it a few times just to check if I would encounter boot issues and was glad that everything was working perfectly, then powered it down. The next morning when I boot, I got this error: hd0 out of disk error. Press any key to continue... again! After pressing a key, it took 10 minutes for the Ubuntu logo to appear with it's 5 dots. After another 5 minutes, Ubuntu started checking the disk and displayed a message that / has errors, I pressed F to fix the errors. After which Ubuntu tells me that /tmp is not yet ready for mounting so I pressed S to skip mounting it, then Ubuntu restarted. On boot I saw the error: hd0 out of disk error. Press any key to continue... again. This time it took only a minute for the Ubuntu logo to appear and after another minute a dialog box appeared with the following message: The system is running in low-graphics mode. Your screen, graphics card, and input settings could not be detected correctly. You will have to configure these yourself. What would you like to do? Run in low-graphics mode for just one session Reconfigure graphics Troubleshoot the error Exit to console login Whichever option I choose I ended up with a console prompt: grub-editenv: error: cannot read the file /boot/grub/grubenv. _ I can't do anything on this console, whatever I type nothing happens. I've rebooted several times and I get same error every time. I don't quite understand what is wrong with Ubuntu or with my installation. I've encountered this hd0 out of disk error several times already and always ended up reinstalling. I'd really really appreciate it if you guys can help me fix this. Thank you and good day.

    Read the article

  • Learn More About the PO Approvals Analyzer

    - by LuciaC
    You may think that the PO Approvals Analyzer for Release 12 is only for diagnosing problems when you have a single Purchase Order or Requisition stuck in process, but it offers valuable information to keep your Procurement environment healthy.  Consider this:     The analyzer will list all Procurement critical patches that have not been applied.     It will provide Procurement invalid objects with error messages and provides solutions.     Validations of setup and database conditions for example max extents and space issues. Also the analyzer can be run on all Purchasing documents starting from a date you enter.  This multiple document check provides validations on:     Data corruption issues.     Workflow errors with generic messages i.e. document manager errors.     Documents with workflows in error that cannot be progressed via the application. And, unlike other diagnostics, the analyzer provides known solutions to the problems indicated! So access the Analyzer today and run it on your instance!  Access it now via Doc ID 1525670.1.

    Read the article

  • Option Button in Keyboard Layout > Input Sources is not pressable

    - by user98647
    I would like to set the Caps-lock key as a Compose key, which you do, as far as I remember, by pressing the Options Button in Keyboard Layout Input Sources and then enabling the appropriate option there. That Button is not pressable though since I switched to 12.10. It did work in previous releases of Ubuntu. gnome-control-center puts out these errors, when I click on Keyboard Layout: (gnome-control-center:3645): common-cc-panel-WARNING **: Could not find current language '?\u0003C!\u007f' in the treeview (gnome-control-center:3645): common-cc-panel-WARNING **: locale '"en_US.UTF-8"' isn't valid I'm not sure if the errors are related though, maybe they are related to the "interface switching to chinese bug" which seems surprisingly widespread: Language changed to Chinese, how do I change it back? Language Support has an unwanted Chinese language option Nautilus Folders Turned Chinese Desktop 12.04 gnome/cairo suddenly in Chinese Unwanted Chinese language got set in system settings I cannot set my system back to English from Chinese Language Gnome-classic language turned into Chinese, how do I change it back to English? Strange display language in gnome shell I'm not sure they are related to this bug, but I just wanted to mention it, maybe it helps!

    Read the article

  • SteamCMD can't add files to my home directory

    - by Angle O'Saxon
    I'm trying to clean up the administration of some game servers I run on a Ubuntu box, part of which has been finally setting permissions properly so I can run the Steam console tool that controls updates and such. I had been running it as root using sudo, but I changed the permissions so that I can start it as a regular user rather than root. That bit seems to work fine, but now when SteamCMD actually starts, it errors with the following output ./steam.sh: line 24: /home/angleosaxon/.steampid: Permission denied Installing breakpad exception handler for appid(steam)/version(1334262703) SteamUpdater: Error: Couldn't create directory /home/angleosaxon/Steam/package, got error 13 [ 0%] Download complete. [----] Verifying installation... unlinked 0 orphaned pipes [----] !!! Fatal Error: Steam failed to load: *SteamStartEngine(0xbfa7cfa0) failed with error 1: Failed to open logfile /home/angleosaxon/Steam/steam.log Leaving aside the question of why it wants to add this information to my home directory, why is it getting access denied errors? As I understand it, since it's being run by my account, it operates with my permissions, so it should be able to read/write from my home directory, shouldn't it? This is the command I'm using to run it: /opt/steamcmd/steam.sh "+login UserAccount \"This is not my actual password.\"" +force_install_dir $ServerDir "+app_update 215360 validate" +quit

    Read the article

  • Problems loading Hilva tutorials

    - by Beska
    I'm a newcomer to XNA, and I'm evaluating some libraries. The Hilva Graphics Engine looks interesting, and I'm trying to run their tutorials. However, all of them give me errors. For example, if I download the ParallaxMappingSample demo, and try to build it, I get Error 1 Error loading pipeline assembly "C:\Users\Me\Desktop\ParallaxMappingSample\Hilva.Content.dll". ParallaxMappingSample I get similar errors for all of the samples. Unfortunately, this error isn't very enlightening. I can see the Hilva.Content.dll in the appropriate directory. I tried removing and readding the reference from the content project, but I get the same error. I'm not sure it's relevant, but I'm on Windows 7, I'm using Microsoft Visual Studio 2010, and XNA 4.0. Is there an easy (or difficult) solution? EDIT: If you happen to try this, even if you don't have a solution, let me know about it in a comment. Whether it works for you, or if you get the same problem...either result would be something that might let me know if it's just a problem with the tutorial, or if it's on my end.

    Read the article

  • What could have caused a large traffic drop from Google in early May?

    - by Scott Schluer
    I have a website (www.equispot.com) that has been indexed for almost 2 years in Google. I managed to get myself on the first page (average position 6-8) on Google for my target keyword of "horses for sale" and held there pretty solidly for months. Suddenly, with no changes to the site, traffic from Google dropped like a rock in early May. I slowly fell in position until now I'm sitting at the bottom of page 4. I have never hired an SEO firm, have not used any "black hat" techniques that Google would have penalized me for in their May update, etc. I'm not familiar enough with SEO to know how to look at link profiles, etc. to tell if there's something wrong. I've run my site through a DNS checker and it came back with no errors. Google Webmaster Tools shows no messages or notices of any kind, just a drop in traffic. GWT also shows only 2 server errors and 1 404. Is there anyone who can tell me by quickly checking my domain if there's an obvious reason that my traffic would have fallen so far, something that I can fix?

    Read the article

  • Working with Google Webmaster Tools

    - by com
    My first question is about Crawl errors in Google Webmaster Tools. Crawl errors is devided into few sections. One of them is HTTP. I assume that all broken links in HTTP was somehow found by crawler, this is not the links from sitemap. If this was found by scanning all sitemap pages for links, why it doesn't mention what was the source page, like in sitemap section with column Linked From. And what the meaning of Linked From, I thought if the name of section is sitemap, therefore all URLs should be taken from sitemap, so why there is Linked From? The second question, what is the best way to trreat searching on the site. How come the searching result page are getting indexed? Because of the fact that all searching result page are getting indexed, I have to many page in Linked From. What's the right practice? Question three: In order to improve response time in WMT, can I redirect all crawler's requests to designated free web server? Is this good practice? Question four: How should I treat Google Analytics Code (with parameters PageView, PageLoadTime), in the case user request non existing page, should I render Google code or not? Right now I use Google Analytics Code on the common template page, such that every page, also non existing page with error message contains Google Analytics Code, it seems like it has influence on WMT.

    Read the article

  • Find methods related to testcases in Java

    - by user3623718
    I want to automatically change some methods in the program. These methods contain some compiler error and my program aims to fix these compiler errors. After fixing compiler errors I need to run test cases related to the changed method (or class) to know it is correct and if not which test cases failed. As the programs under investigation are very big, I only need to run test cases related to changes. As an example, if I change one method, then I need to only run test cases related to this method. Therefore, what I need is to programmatically be able to find test cases related to each method, and class. It is also useful if there is a tool that can do that for me. As an example, a tool which creates a matrix shows each test case is related to which method(s) One easy way to do that is to run all test cases and save functions they accessed. However, the problem is at the beginning the input program contains compiler error and it is not possible to run test cases because of these compiler error. Please let me know what is the best way to do that. An API or a tool that I can be used programmatically is the best for me.

    Read the article

  • Stylecop 4.7.39.0 has been released

    - by TATWORTH
    Stylecop  4.7.38.0 has been released at http://stylecop.codeplex.com/releases/view/79972The release notes follow:Allow case sensitivity in the deprecated words and recognised words listStyleing fixes.Fix for documentation spelling checks inside nested xml nodes.Look for CustomDictionary.xml files in the folder of the cs file.Update the TabIndex in the spelling tab.Updating default deprecated words and their alternatives.Add support for specifying dictionary folders in the settings.StyleCop file. Like :Rename StyleCopViolationError to StyleCopHighlightingError and all associated types.Fix the Bulb Item for spelling mistakes to replace matching words correctly.Fix the spelling parser for strings beginning with $$THREADING FIX: Make StyleCop execute analysis in proces and not create 2 threads. Use Countdown Event when we move to .NET 4.Use the naming service for the Culture specified for the project. Pass the actual violation through to ReSharper.Ensure Registry access code works for VS2008 addins.Rollback Registry changes to ensure VS2008 plugin loads correctly.Adding support for preferred alternative words for spelling. Adding deprecated word support into Settings.StyleCop file. Spelling is only checked if Office 2010 is installed. Allow editing of deprecated words and their alternatives in the Settings editor.Adding new resource stringsAdding BulbItem and Quick fixes for spelling errors.Moving StringExtensions to common area.Styling fixes.Report all spelling errors found on a line.Start of 4.7.39.0 dev.

    Read the article

  • How to implement isValid correctly?

    - by Songo
    I'm trying to provide a mechanism for validating my object like this: class SomeObject { private $_inputString; private $_errors=array(); public function __construct($inputString) { $this->_inputString = $inputString; } public function getErrors() { return $this->_errors; } public function isValid() { $isValid = preg_match("/Some regular expression here/", $this->_inputString); if($isValid==0){ $this->_errors[]= 'Error was found in the input'; } return $isValid==1; } } Then when I'm testing my code I'm doing it like this: $obj = new SomeObject('an INVALID input string'); $isValid = $obj->isValid(); $errors=$obj->getErrors(); $this->assertFalse($isValid); $this->assertNotEmpty($errors); Now the test passes correctly, but I noticed a design problem here. What if the user called $obj->getErrors() before calling $obj->isValid()? The test will fail because the user has to validate the object first before checking the error resulting from validation. I think this way the user depends on a sequence of action to work properly which I think is a bad thing because it exposes the internal behaviour of the class. How do I solve this problem? Should I tell the user explicitly to validate first? Where do I mention that? Should I change the way I validate? Is there a better solution for this? UPDATE: I'm still developing the class so changes are easy and renaming functions and refactoring them is possible.

    Read the article

  • Error on /home prevents OS boot

    - by mdrg
    Ok, I'll try to explain it listing the events: motherboard battery is weak, loses config everytime I shut the PC down; system clock usually back to 1990-something; this time, it went up to 2148; ubuntu became somewhat unusable (firefox refusing certificates, dropbox blocked), so I restarted; manually set the clock to current date and restarted; during boot, ubuntu detects errors and start auto-fix, rebooting itself in the middle of it (like a hard reboot, no shutdown messages) next time, shows boot animation screen in text mode, with an error message after a while: "Errors were found while checking the disk drive or /home", with "attempt to fix, ignore, skip mounting or manual recovery" None of the options during the boot work, they just type the text to the screen, then I'm forced to physically restart. Now I'm using Mint LXDE live CD, and I can see all my partitions just fine, including /home (my home folder blocked due to encryption, the other user folder is accessible and everything in place). I'm not sure how to proceed now. I'd like to just fix ubuntu boot without reinstalling or anything like it (at least until 12.04). What should I do now? can I easily fix this somewhow? Thanks!

    Read the article

  • Grub2 mutual dependency issue

    - by A T
    For various reasons I am installing .deb dependencies for grub2 using dpkg directly (rather than apt-get). root@ubuntu:/dl# dpkg -i grub-gfxpayload-lists_0.6_amd64.deb Selecting previously unselected package grub-gfxpayload-lists. (Reading database ... 249808 files and directories currently installed.) Preparing to unpack grub-gfxpayload-lists_0.6_amd64.deb ... Unpacking grub-gfxpayload-lists (0.6) ... dpkg: dependency problems prevent configuration of grub-gfxpayload-lists: grub-gfxpayload-lists depends on grub-pc (>= 1.99~20101210-1ubuntu2); however: Package grub-pc is not configured yet. dpkg: error processing package grub-gfxpayload-lists (--install): dependency problems - leaving unconfigured Processing triggers for man-db (2.6.7.1-1) ... Errors were encountered while processing: grub-gfxpayload-lists By configure I assume it means install+configure, so I tried: root@ubuntu:/dl# dpkg -i grub-pc_2.02~beta2-9_amd64.deb (Reading database ... 249818 files and directories currently installed.) Preparing to unpack grub-pc_2.02~beta2-9_amd64.deb ... Unpacking grub-pc (2.02~beta2-9) over (2.02~beta2-9) ... dpkg: dependency problems prevent configuration of grub-pc: grub-pc depends on grub2-common (= 2.02~beta2-9); however: Package grub2-common is not installed. grub-pc depends on grub-pc-bin (= 2.02~beta2-9); however: Package grub-pc-bin is not installed. grub-pc depends on grub-gfxpayload-lists; however: Package grub-gfxpayload-lists is not configured yet. dpkg: error processing package grub-pc (--install): dependency problems - leaving unconfigured Processing triggers for man-db (2.6.7.1-1) ... Errors were encountered while processing: grub-pc How do I solve this problem?

    Read the article

< Previous Page | 227 228 229 230 231 232 233 234 235 236 237 238  | Next Page >