Search Results

Search found 23890 results on 956 pages for 'issue'.

Page 231/956 | < Previous Page | 227 228 229 230 231 232 233 234 235 236 237 238  | Next Page >

  • How does one change the UUID of a Volume on Mac OS X 10.6?

    - by Emmel
    Does anyone know how to change the UUID of a Volume? The background for this question is that I have a duplicate UUID issue: I have /Volumes/OldMacHD with a UUID of XYZ. I have /Volumes/Mirror1 with a UUID of XYZ (same UUID! I bet that's because OldMacHD USED to be part of this mirror). I got these UUIDs via 'diskutil info /dev/thatdisknumber | grep UUID'. I'd like to change the UUID of 'Mirror1'. I discovered by chance the 'hfs.util' utility, since these are HFS volumes after all. The man page for hfs.util says that if you issue the -s flag, this changes the UUID. However, if you type hfs.util all by itself, it doesn't show you the -s option at all, just every option besides that! Grr. I tried it anyway: sudo /System/Library/Filesystems/hfs.fs/hfs.util -s /dev/disk4 (the raid volume). Nothing happens. No error message, no success message. UUID exactly the same. I tried it while the volume was unmounted. Any ideas?

    Read the article

  • I used disk copy to clone my drive, now my windows 7 profile won't load correctly

    - by RzK
    I used easeuse disk copy, after acronis, clonezilla, windows image restore failed me. Basically it copys all sectors, I set it to skip bad sectors(40). The source drive works, it just gave me a couple errors and stopped booting at one point. The drive is an identical copy, minus 40 bad errors. The drive is set to C and active partition, I rebuilt the boot order. I've ran sfc /scannow and ran chkdsk /r chkdsk found 20kb of bad sectors if I remember right. Now the issue I get is when I log into my profile which was saved right, I get a blank light blue wallpaper (non-license) explorer.exe is not running, and there are only 4 processes running in taskmanager, including taskmanager. I would try a repair install but CRTL-E would not open, nothing will open once I force start explorer.exe, almost like all services are down. What should I do? Fresh install is almost not a possibility I will try and fix this issue. sfc /scannow /offbootdir=c:\ /offwindir=c:\windows returns "Windows Resource Protection could not perform the requested operation"

    Read the article

  • Exchange ActiveSync Exception

    - by Dmeglio
    One of the users on my network is having an issue with his iPhone syncing via ActiveSync. Overall it's working, but every now and then he gets a "Synchronization with your iPhone failed for 3 items." I asked him to go into OWA and turn on the Mobile Phone logging. I looked through the logs and this is what stood out to me: SyncCommand_GenerateResponsesXmlNode_AddChange_Exception : Microsoft.Exchange.Data.Storage.PropertyErrorException: Property: [{00062008-0000-0000-c000-000000000046}:0x8501] ReminderMinutesBeforeStartInternal, PropertyErrorCode: NotFound, PropertyErrorDescription: . at Microsoft.Exchange.Data.Storage.PropertyBag.ThrowIfPropertyError(StorePropertyDefinition propertyDefinition, Object propertyValue) at Microsoft.Exchange.Data.Storage.StoreObject.GetProperty(PropertyDefinition propertyDefinition) at Microsoft.Exchange.Data.Storage.MeetingMessage.get_Item(PropertyDefinition propertyDefinition) at Microsoft.Exchange.AirSync.SchemaConverter.XSO.XsoMeetingRequestProperty.get_NestedData() at Microsoft.Exchange.AirSync.SchemaConverter.AirSync.AirSyncMeetingRequestProperty.InternalCopyFrom(IProperty srcProperty) at Microsoft.Exchange.AirSync.SchemaConverter.AirSync.AirSyncProperty.CopyFrom(IProperty srcProperty) at Microsoft.Exchange.AirSync.SchemaConverter.AirSync.AirSyncDataObject.CopyFrom(IProperty srcRootProperty) at Microsoft.Exchange.AirSync.SyncCollection.ConvertServerToClientObject(ISyncItem syncItem, XmlNode airSyncParentNode, SyncOperation changeObject) at Microsoft.Exchange.AirSync.SyncCollection.GenerateCommandsXmlNode(XmlDocument xmlResponse, IAirSyncVersionFactory versionFactory, String deviceType, ProtocolLogger protocolLogger, MailboxLogger mailboxLogger) Does anyone have any idea what might cause this? We have 4 iPhone users connected to our Exchange via ActiveSync. Right now, this seems to be the only user experiencing this issue. I'd appreciate any help anyone can provide. Thanks.

    Read the article

  • Intermittent PHP error: Undefined function <core function>

    - by Daniel
    In the last week I've been coming across an incredibly annoying error on one of Slicehost slices. It appears that every now and then PHP will fail with a fatal error, saying a certain function is undefined. The function changes, but is always a core PHP function e.g. defined(), version_compare(), etc. This problem has occurred while using several different PHP applications - PHPMyAdmin, my own custom built apps, etc, leading me to believe that the problem is not specific to the running code. Here are some details: - Debian Lenny - Apache 2.2.9 - PHP 5.2.6-1+lenny4 with Suhosin-Patch (running eAccelerator 0.9.6) Apache and PHP are installed from Debian packages. Error logs show nothing out of the ordinary. I thought memory might be an issue, but free -m reports upwards of 100MB free almost all the time. Another thing I'm trying to investigate is if the problem might be related to eAccelerator, but testing this theory out is incredibly hard because the issue doesn't appear very often and I've been using eAccelerator for months on this install without any problems up until now. Has anyone ever come across anything like this? Why would PHP report undefined core functions?

    Read the article

  • Can't find disk usage in one directory

    - by Xster
    Similar questions are asked frequently but no suggested answers solved my issue. I have some disk space usage that I can't find as well. In df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 144183992 136857180 2652 100% / udev 2013316 4 2013312 1% /dev tmpfs 808848 876 807972 1% /run none 5120 0 5120 0% /run/lock none 2022116 76 2022040 1% /run/shm overflow 1024 0 1024 0% /tmp I checked the inodes, I checked lsof for +L1 or deleted files, I rebooted, I checked for files hidden behind mounts but none of them were the issue. It grows periodically and I'm running out of things to delete to feed the beast. It's all in the home directory of the only user I have. In du in ~ du -h --max-depth=1 192K ./.nv 2.1M ./.gconf 12K ./Pictures 1.6M ./.launchpadlib 12K ./Public 24K ./.TemporaryItems 8.9M ./.cache 12K ./Network Trash Folder 28K ./.vnc 11M ./.AppleDB 48K ./.subversion 1.9G ./.xbmc 8.0K ./.AppleDesktop 12K ./.dbus 81M ./.mozilla 12K ./Music 160K ./.gnome2 44K ./Downloads 692K ./.zsh 236K ./.AppleDouble 64K ./.pulse 4.0K ./.gvfs 1.4M ./.adobe 44K ./.pki 44K ./.compiz-1 168K ./.config 1.4M ./.thumbnails 12K ./Templates 912K ./.gstreamer-0.10 8.0K ./.emacs.d 92K ./Desktop 1.3M ./.local 12K ./Ubuntu One 12K ./Documents 296K ./.fontconfig 12K ./.qt 12K ./.gnome2_private 20K ./.ssh 20K ./.mission-control 12K ./Videos 12K ./Temporary Items 640K ./.macromedia 124G . I can't find a way to figure out how it got to that 124G in that directory. There are no mount points in home.

    Read the article

  • need to stop mysql server on my mac os x

    - by al0ne evenings
    I just installed xampp on my mac os x. When I tried start mysql it display a message that mysql is already running on this computer. In order to start mysql stop first mysql. I tried following ways to stop it but neither of them works. mysqladmin version sudo /usr/local/mysql/mysql.server stop //mysql.server command not found mysqladmin -u root -p password shutdown //restarts the server but not shutdown when i use which mysql command it shows this path /usr/local/bin/mysql and when I issue ps aux | grep mysqld command I get following output zafarsaleem 85209 0.0 0.3 2699804 13204 ?? S 7:51AM 0:00.88 /Applications/MAMP/Library/bin/mysqld --basedir=/Applications/MAMP/Library --datadir=/Applications/MAMP/db/mysql --plugin-dir=/Applications/MAMP/Library/lib/plugin --lower-case-table-names=0 --log-error=/Applications/MAMP/logs/mysql_error_log.err --pid-file=/Applications/MAMP/tmp/mysql/mysql.pid --socket=/Applications/MAMP/tmp/mysql/mysql.sock --port=8889 zafarsaleem 85093 0.0 0.0 2435488 924 ?? S 7:51AM 0:00.03 /bin/sh /Applications/MAMP/Library/bin/mysqld_safe --port=8889 --socket=/Applications/MAMP/tmp/mysql/mysql.sock --lower_case_table_names=0 --pid-file=/Applications/MAMP/tmp/mysql/mysql.pid --log-error=/Applications/MAMP/logs/mysql_error_log zafarsaleem 86693 0.0 0.0 2425480 180 s004 R+ 8:30AM 0:00.00 grep mysqld zafarsaleem 86507 0.0 0.3 2678756 11364 ?? S 8:07AM 0:00.63 /usr/local/Cellar/mysql/5.5.20/bin/mysqld --basedir=/usr/local/Cellar/mysql/5.5.20 --datadir=/usr/local/var/mysql --plugin-dir=/usr/local/Cellar/mysql/5.5.20/lib/plugin --max-allowed-packet=32M --log-error=/usr/local/var/mysql/Zafars-MacBook-Pro-2.local.err --pid-file=/usr/local/var/mysql/Zafars-MacBook-Pro-2.local.pid zafarsaleem 86447 0.0 0.0 2435488 920 ?? S 8:07AM 0:00.02 /bin/sh /usr/local/bin/mysqld_safe --max_allowed_packet=32M Please help. How can I resolve this issue.

    Read the article

  • Compaq R4000 laptop randomly locking up

    - by Josh
    I have a Compaq R4000 laptop with 2GB of RAM, running Ubuntu Linux 9.10. It is randomly locking up on me, approximately once every two days. I have a second partition with Windows XP Home installed, and I have had the system lock up in XP as well, meaning I believe this is a hardware issue. I have run two passes of Memtest86+ with no errors. The system has a fan that has died, so I initially suspected overheating. However the system just locked up on me while I was in the middle of typing a script to warn me / shut down if the temperature was too high. When the lockup happened the temperature was 88°F, so I am now starting to believe that may not be the issue. When the system locks up, I cannot SSH in nor ping it. Nothing shows in syslog when I reboot. I have configured it to send syslog messages to a local server as well and no messages appear on that server when the lockup happens. I am open to any and all advice!

    Read the article

  • Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

    - by Paul J. Warner
    I am having an issue with a program where after 6 mins +- 5 secs we get the above exception. Some more info about the exception stacktrace is below. This all happens pretty religiously, 6 mins goes by and bam the following 3 exeptions. We have the application installed in 2 other environments and it is working fine there. I am hoping to find some server settings either IIS 6 or Server 2003 settings that may be causing this issue to occur. I have reviewed some of the similar questions and don't see very many answers. I am hoping that maybe the information I have provided may help a little bit. 208741,Exception,,,,2011-06-21 00:30:14.193,SERVERNAME,2624,1,CLIENTNAME,The underlying connection was closed: An unexpected error occurred on a receive. , at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request) at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request) at Microsoft.Web.Services3.WebServicesClientProtocol.GetResponse(WebRequest request, IAsyncResult result) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security._SslStream.StartFrameHeader(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.StartReading(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.TlsStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.Connection.SyncRead(HttpWebRequest request, Boolean userRetrievedStream, Boolean probeRead),2004437127,114,1 208742,Exception,,,,2011-06-21 00:30:14.227,SERVERNAME,2624,1,CLIENTNAME,Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. , at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security._SslStream.StartFrameHeader(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.StartReading(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.TlsStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.Connection.SyncRead(HttpWebRequest request, Boolean userRetrievedStream, Boolean probeRead),2004437127,114,1 208743,Exception,,,,2011-06-21 00:30:14.287,SERVERNAME,2624,1,CLIENTNAME,An existing connection was forcibly closed by the remote host , at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size),-691097507,62,1

    Read the article

  • Server 2008 R2 DNS Lockup / Stops Resolving Internet Names

    - by Richard Maynard
    We've deployed our first 2008 R2 server on a client site which has replaced their existing 2003 DC. This server provides DNS resolution services to all client machines on that site for general internet usage. Since using the 2008 R2 DNS services we have noticed every couple of days the DNS server starts timing out when requests to certain sites are made (google is the only example I can provide at this time although it seems to be larger sites with problems rather than small - CDN compatiblity issue?). When you restart the DNS Server service then resolution returns to normal... just only for a day or so. Is anybody aware of any significant changes to the DNS server architecture or configuration out of the box in R2 that may explain this intermittent behaviour? I have already tried the fix listed here to no avail: http://weblogs.asp.net/owscott/archive/2009/09/15/windows-server-2008-r2-dns-issues.aspx The following PS command prompt info illustrates the issue: PS C:\Users\Administrator.UK> nslookup Default Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 > www.google.com Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 Non-authoritative answer: Name: www.l.google.com Addresses: 66.102.9.99 66.102.9.104 66.102.9.105 66.102.9.103 66.102.9.147 Aliases: www.google.com > www.google.co.uk Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 * s8209001.uk.kingdomfaith.com can't find www.google.co.uk: Server failed

    Read the article

  • How to configure Apache to let PHP handle OPTIONS HTTP requests?

    - by Robin Berjon
    In order to set up a proper test suite for CORS (cross-domain requests) I need to be able to handle the HTTP OPTIONS method directly from script. I therefore have a simple PHP script that detects the OPTIONS method, and reacts accordingly by outputting some specific headers. The PHP side is not a problem. If I use curl to issue GET/POST/HEAD/PUT/etc. requests they all go to the script and it clearly handles them fine. If I issue an OPTIONS request however, it never reaches the script: Apache immediately replies listing a set of methods that it believes to be appropriate for this resource. I can tell that the script isn't run (no logging, none of its output makes it to the response, etc.). I've been going through the Apache configuration, have made sure no applicable .htaccess is in the way, I've tweaked a bunch of things such as Limit/LimitExcept directives, but I can't get it to change its behaviour. I've also tried to find information on a technique from my youth that could have helped here: NPH (non-parsed headers) scripts; but apparently that has now disappeared (at least, I can't find any recent information about it that works). So the question is: how do I tweak Apache's configuration so that it will let my script handle OPTIONS?

    Read the article

  • Windows Server 2008 R2, weird intermittent outgoing connection issues, & Hyper-V Virtual Network

    - by brizz
    My provider says that they run an 'unfiltered' network, so it's not a network issue. Not entirely convinced...but they aren't being very helpful. Basically two days ago started having issues with DNS completely stop working for anywhere between 2-20minutes. This happens roughly every 1-2 hours at least once. I later then found that I am unable to ping ANY external IP address when this is going on. So it's not a DNS issue. Whats even more odd is when this is going on, I STAY connected via RDP, and I can access webpages, etc that are on the server when I access from my home computer. Have tried disabling the firewall--no fix. Have checked Event viewer, the only thing that is there is a warning that DNS has stopped working. I have made no changes/updates to the server. The only thing I have done is add an IP address (don't think it has anything to do with the problem, but wanted to mention everything). Any help/insight/suggestions on how to go about debugging would be much appreciated! update: I am also running Hyper-V, and a virtual network. I just tried pinging (when I have issues), from a Hyper-V machine--and it works, when the main server doesn't.

    Read the article

  • Windows 7 PC cannot see some LAN PCs, but can access them via path

    - by zoot
    In an office LAN, with Windows 7 Professional workstations and a FreeNAS Samba server, 2 workstations have intermittent problems in browsing for the other workstations, as well as the FreeNAS server. However, so far, it appears that typing in the path to any of the workstations which aren't visible via the "browse" function, works. ie. the machine Workstation7 is not visible while browsing via Windows Explorer, but is accessible if I type \\Workstation7 in the path field. Occasionally the workstations exhibiting these symptoms show errors that their connection to the FreeNAS server has failed and only rebooting resolves the issue. All other workstations on the network use identical Windows 7 Professional installations and never have these problems. I've checked all machines and they're not using Home Groups. All are setup on the same WorkGroup as the FreeNAS server and the network type is set to Work Network. Temporarily disabling the firewall on the workstations with the issue made no difference, so I know this has nothing to do with the firewall settings. Any pointers would be appreciated. Thanks.

    Read the article

  • Adding network share as the system account breaks Win7 backup to network

    - by ChrisBenn
    (On Win7 Ultimate x64 SP1) So I've been using Win7 backup to \192.168.0.100\Backup\main-desktop\ for awhile without issue. Yesterday I tried to setup crashplan to synchronize my dropbox folder and a network share. I then found out that crashplan, as it runs under the system account, can't see my user mapped drives. So I created a startup script net use O: \192.168.0.100\Documents /USER:192.168.0.100\username password and set it to run, on startup, after the network interface is up, as the system account. (the username & password are the same for the net use script above, the locally logged in user, and the explicit username/password entered in windows backup). I woke up this morning to find error flags from the windows backup and get "Network location cannot be used" (0x800704B3). If I disable the startup task & reboot then windows backup works fine. I'm not sure why having a mapped drive for another user is killing windows backup (same server, different folder). I can work around the issue by using another program to synchronize the two folders, but I'm completely in the dark as to why this happens (and it's 100% repeatable). Uninstalling the crashplan client doesn't change anything - it's the net use run under the system account that breaks win7 backup (to a network location).

    Read the article

  • SharePoint solution package not deploying to all front-ends

    - by Alex
    I have a WSP that contains a web part. It's being built using WSPBuilder. Most of the time, the WSP deploys perfectly. However, in two of our test environments (and sadly, in production, too) the WSP doesn't deploy properly to all the web front ends. The assemblies make it into the GAC, and the .webpart files get provisioned. The problem is that a tool part that the web part relies on for configuration simply fails to appear. I've determined that every time this has happened, it has been isolated to a single web front end. I've been able to resolve the issue by doing an stsadm -o deploysolution to re-deploy the solution, and in one instance it was resolved by the end user deactivating/reactivating the feature. Unfortunately, though, this has made it impossible to determine if the control isn't being deployed properly, or if it's some other issue. Any thoughts on this? Could it be a problem with the WSP, or is it likely to be environmental?

    Read the article

  • How does one change the UUID of a Volume on Mac OSX 10.6?

    - by Emmel
    Does anyone know how to change the UUID of a Volume? The background for this question is that I have a duplicate UUID issue: I have /Volumes/OldMacHD with a UUID of XYZ. I have /Volumes/Mirror1 with a UUID of XYZ (same UUID! I bet that's because OldMacHD USED to be part of this mirror). I got these UUIDs via 'diskutil info /dev/thatdisknumber | grep UUID'. I'd like to change the UUID of 'Mirror1'. I discovered by chance the 'hfs.util' utility, since these are HFS volumes after all. The man page for hfs.util says that if you issue the -s flag, this changes the UUID. However, if you type hfs.util all by itself, it doesn't show you the -s option at all, just every option besides that! Grr. I tried it anyway: sudo /System/Library/Filesystems/hfs.fs/hfs.util -s /dev/disk4 (the raid volume). Nothing happens. No error message, no success message. UUID exactly the same. I tried it while the volume was unmounted. Any ideas?

    Read the article

  • Segmentation fault on login to mysql

    - by numberwhun
    Hello everyone! I recently did a fresh install of Ubuntu on my laptop (HP dv7, AMD Dual Core with 4 gigs RAM). I am working on installing my development environment and tools and one of the first things I was working on is getting MySQL installed. The following was my configure statement with options: ./configure --prefix=/usr/local/mysql --with-big-tables --with-unix-socket-path=/usr/local/mysql/tmp/mysql.sock --with-named-curses-libs=/lib/libncurses.so.5.7 After I did the make;make install, I did the post configuration such as setting the root password and installing the mysqld daemon in its rightful place. My issue is when I try to log in to mysql to start using it, the following shows what happens: $ mysql -u root -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 1 Server version: 5.1.42 Source distribution Segmentation fault I have searched Google extensively, I have searched through the mysql bugs database and I have yet to find anything that matches my issue. Here is the contents of my my.cnf file, in case you want to see it: $ cat /etc/my.cnf [mysqld] basedir=/usr/local/mysql datadir=/usr/local/mysql socket=/usr/local/mysql/tmp/mysql.sock [mysql.server] user=mysql #basedir=/var/lib [client] socket=/usr/local/mysql/tmp/mysql.sock [mysqld_safe] err-log=/usr/local/mysql/logs/mysqld.log pid-file=/var/run/mysqld/mysqld.pid I am really hoping that someone here can tell me what has gone wrong with my installation as I would really love to know. I welcome and look forward to all responses. Thank you in advance! Best regards, Jeff

    Read the article

  • Windows 7 Users unable to add Windows 2003 server printers

    - by TravBrack
    Hi there I just rolled out a few Windows 7 x64 machines and ran into this issue where non-admin users are unable to add printers hosted on a windows 2003 server. It works fine on a 2008 server. The issue appears to be with the point and print system. A user will attempt to add the printer, a prompt will come up requiring the user to elevate privileges in order to install a driver, and will fail citing 'access denied'. I found the group policy setting Point and Print Restrictions: When the policy setting is disabled: -Windows Vista computers will not show a warning or an elevated command prompt when users create a printer connection to any server using Point and Print. So I disabled it, verified that the policy was being picked up using rsop, but it still does the same thing. I've also tried the following: Recreating the printers using newer drivers Adding the printer using 32 bit drivers on the 2003 machine, then adding the 64 bit drivers on a Windows 7 machine Adding the printer from a windows 7 machine using print management None of these things work. The security settings are no different than the working printers. Help?

    Read the article

  • LogMeIn Hamachi for Linux

    - by tlunter
    So far most of my work using LogMeIn Hamachi has been from either a Mac OS X or Windows system to Windows or a Linux Computer. Recently I purchased a mini computer and have been running Ubuntu Server on it, as my little server. I knew LogMeIn had a Linux client that is command line only, but I often do all my work via command line anyway, so that wasn't an issue. I added my user to the correct local file so that I could run the hamachi daemon without sudo, and was able to connect to LogMeIn's service. I decided to set up my Linux server as a git server as well, and set it up correctly. The thing is, the server is behind my schools firewall and I need to use hamachi to get around that. Since most of the time I was using either Mac or Windows, I never had an issue sshing onto any of my computers since LogMeIn is fully featured for these OSs. From Linux (Arch) though, it seems like the client cannot correctly route to the LogMeIn IPs. I know from Windows I can connect to the Linux computers, both of them. From Linux (Arch) though, I can't connect to my Mac, Windows, or Linux server. It keeps just dropping the connection. I was wondering if there was some configuration that I would need to make for this to work. I understand that it is most likely going to be a static configuration since I assume it has to do with the computer not understanding that 5.*.*.* actually refers to another IP:Port. Has anyone had any experience getting this to work?

    Read the article

  • Windows AD DNS: Event ID 5504

    - by Chris_K
    Two of my AD controllers (both running DNS service) appear to be having a similar issue. Both are throwing lots of events in the DNS events that look like this: Event Type: Information Event Source: DNS Event Category: None Event ID: 5504 Date: 5/24/2010 Time: 11:51:38 AM User: N/A Computer: ALPHA Description: The DNS server encountered an invalid domain name in a packet from 76.74.137.6. The packet will be rejected. The event data contains the DNS packet. That will come with the same event, same time, with a packet from 76.74.137.7 as well. I know this is "Information" not an error, but since it is new and different it bothers me (yes, I fear unexplained change!) Both machines are running Windows 2003 R2 SP2. The DNS servers are not exposed to the internet. Both DNS servers are configured to use OpenDNS for Forwarders. For both servers, this started about a week ago. Any thoughts on: 1) should I be concerned? 2) how can I stop/fix this? To keep it interesting, I have a 3rd AD / DNS box. Same domain, different Active Directory site. Same forwarders, yet doesn't have this issue.

    Read the article

  • Ubuntu 12.04 glusterfs volume failed to mount at boot time

    - by user183394
    I have just setup 7 KVM guests, all running Ubuntu 12.04 LTS 64bit Minimal server to test out glusterfs 3.2.5 from the Ubuntu official repo. Two of them form a mirrored pair (i.e. replica 2), and five of them are clients. I am still new to this file system and would like to gain some "hands-on" experience. The setup was mostly uneventful, until I put in the following into each glusterfs client's /etc/fstab: 192.168.122.120:/testvol /var/local/testvol glusterfs defaults,_netdev 0 0, where 192.168.122.120 is the IP address of the first "glusterfs server". If I issue either a manaul mountall or a mount.glusterfs 192.168.122.120:/testvol /var/local/testvol on CLI, a mount shows that the volume is successfully imported. But once a client is rebooted, after it comes back up, the volume is not mounted! I searched the Internet, and found this article, but since I am not running both client and server on the same node, IMHO it's not strictly applicable. So, as a kludgy "get-around", I put in a sleep 3 && mount.glusterfs 192.168.122.120:/testvol /var/local/testvol into each client node's /etc/rc.local. It seems to be able to get the volume mounted on each node, as far as I can tell. But this is quite ugly, and I would appreciate a hint as to how to resolve this glusterfs-non-boot-time-mounting issue correctly. Note that I used the IP address of the first "glusterfs server" although the /etc/hosts of all nodes have been populated with their hostnames. I figured that the use of IP address is more robust. --Zack

    Read the article

  • TFS 2012 and MS SQL 2008r2

    - by Vadim911
    When I try to call TFS 2012 warehouse control web service (WarehouseControlService.asmx) I got following error: Exception Message: Could not load file or assembly 'Microsoft.AnalysisServices, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. (type FileNotFoundException) Exception Stack Trace:    at Microsoft.TeamFoundation.Warehouse.WarehouseConfigurationService.RebuildOLAPDatabase(TeamFoundationRequestContext requestContext, String olapServerInstanceName, String databaseName, String warehouseServerInstanceName, String warehouseDatabaseName, Int32 translationLCID, Boolean checkAndUpdateJobs)    at Microsoft.TeamFoundation.Warehouse.WarehouseConfigurationService.RebuildOLAPDatabase(TeamFoundationRequestContext requestContext, String olapServerInstanceName, String databaseName, String warehouseServerInstanceName, String warehouseDatabaseName, Int32 translationLCID)    at Microsoft.TeamFoundation.Management.SnapIn.ApplicationTierNode.RebuildReporting(IntPtr hwnd, IRefreshable panel) Inner Exception Details: Exception Message: Could not load file or assembly 'Microsoft.AnalysisServices, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. (type FileNotFoundException) Exception Stack Trace:    at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)    at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)    at System.Reflection.Assembly.Load(AssemblyName assemblyRef)    at Microsoft.TeamFoundation.Common.Internal.TfsAssemblyResolver.OnAssemblyResolve(Object sender, ResolveEventArgs args)    at System.AppDomain.OnAssemblyResolveEvent(RuntimeAssembly assembly, String assemblyFullName) It is strange because I have installed ms sql connectivity. Is it issue connected with the fact that I try to use tfs 2012 with ms sql 2012? Please advise how to resolve issue networked above.

    Read the article

  • Error 53 - The network path was not found.

    - by Jack
    I have a machine in my Active Directory Domain that I can no longer "net view" from other machines in the domain. This is a Windows XP Pro machine. It is hosting a VMWare virtual of my Domain Controller. If I attempt to net view [machine name] I get system error 53, The network path was not found. This is not a DNS issue, the same thing happens with the machine's IP. I don't think it's a firewall issue, I turned the firewall off on this machine. As I mentioned, it has worked in the past, and then stopped for no reason that I can see. I (intentionally) didn't change the software. I CAN get to the VMs hosted on this machine, can connect to their shares, net view them, etc. All other machines can see each other. In fact, the problem machine can see other machines and access their shares just fine. I tried removing the machine from the domain and re-adding it. I tried deleting the shares and recreating them. Not sure how to troubleshoot this any further. Any ideas?

    Read the article

  • OS X can't copy files from Windows Home Server...over wifi.

    - by John Clayton
    I'm a brand spanking new user of OS X, coming from a lifetime of Windows use. I've been setting up my new Macbook Pro and have run into a very unusual problem. Over wifi, I am unable to copy files to or from my Windows Home Server. The problem seems to exist only over wifi, and only to WHS. Here are the details of my setup: 2010 Macbook Pro (Core i7), OS X 10.6.3 Windows Home Server PP3 (virtualized in XenServer 5.5) Windows 7 Ultimate x64 desktop Windows 7 Ultimate x64 in Boot Camp D-Link DIR-655 wireless N router Here is what I've done to narrow down the problem: Files copy fine from WHS to OS X when using gigabit ethernet Files copy fine from desktop to OS X when using gigabit ethernet Files fail to copy from WHS to OS X when using wifi (error -51) Files copy fine from desktop to OS X when using wifi Files copy fine from WHS to Boot Camp when using wifi Files copy fine from desktop to Boot Camp when using wifi From what I can tell, it seems to be some sort of issue between OS X and WHS, but I can't for the life of me see what would be different between shares on WHS and my desktop. They are both connected using smb://ADDRESS (I've tried both by IP and name). I can browse the shares on the WHS, but copying to OS X fails. I originally found the issue while installing VS2010 off an ISO from WHS, mounted to a Windows 7 VM using VMware Fusion. During the installation the VM was unusable - even the clock got behind the host be about 8 minutes. Once I plugged in the ethernet and disabled the wifi things picked up and finished quickly. The Fusion 3.1 RC is the only I think of that I installed that may have messed with the wifi driver. I've also tried resetting the wifi router, and have changed it from being G & N to N-only. Under Boot Camp I get similar speeds as my wife's N laptop. Any ideas? Thanks!

    Read the article

  • Poor gaming performance with hyper-v installed in windows 8

    - by SnowCrash
    I am getting very poor gaming performance on my Windows 8 host OS with Hyper-V installed but no guest machines running. For example World of Tanks reports 60-70 FPS without Hyper-V installed and 4-14 FPS with it installed. A similar, dramatic, hit is observed in several other games so the issue is not WoT specific. To make the point clear, I am not trying to run games in a virtual machine. I don't even have a VM running while observing this effect. I simply have the Hyper-V feature installed. My system specs: AMD Phenom II 965 (3.4 GHz) AMD Radeon 6950 2GB (XFX Double D HD-695X-CDFC) 16GB DDR3 1333 AMD 790GX chipset Mainboard (Gigabyte GA-MA790GPT-UD3H) I have tried every AMD driver from 12.8 to the current 12.11beta8, virtualization is enabled in the BIOS settings, the onboard 3300HD video device is disabled in BIOS and I have read the MSDN blog entry here regarding a similar issue in Server 2008 that was resolved in 2008 R2 (and hopefully not regressed in Win 8). I'd like to be able to use Hyper-V for development and testing at home (I am a sysadmin/software developer professionally). If, however, I can't also use my home system for entertainment I'll have to scrap those plans.

    Read the article

  • How do I troubleshoot a slow hard drive?

    - by Bruce Connor
    My computer is suffering of slow-downs and I'm not surprised (it's around 6 years old). Here's what I've verified: They are not very frequent (only a couple of times a day). When they happen a single application will hang for 10-60 seconds, while the rest don't hang but also get slow. Even as it is happening, the CPU usage stays low. It happens to applications (such as text editor, firefox, skype). It never happens to some applications (such as games) which I use for hours under heavy CPU load. Also of note: The Graphics card and PSU are new (around a year). Though I have a decent amount of software installed right now, this was happening even right after I reinstalled Windows. This HDD has been through many partinioning schemes, and a few heavy operations (such as moving around 200GB of data). Because of the above, I am already 70% sure the problem is with the hard drive. Before I replace it, however, I want to rule out other less likely possibilities (such as RAM, software, or PSU). I don't have the money to replace the entire box right now, but I can easily replace one of the components. I've read several questions (such as this one) which give general guidance on troubleshooting an unknown issue, that is not what I'm looking for here. My main question is: What tests or benchmarks can I run to verify I have a problematic hard drive? I don't need to solve this problem, I am content with just making sure it's the hard drive. I could borrow a newer hard drive from a friend and see if it gets better. A positive result would rule out all other components, but it wouldn't rule out a software issue (since this new hard drive won't have any of the software I use daily). Running on Windows/Linux.

    Read the article

< Previous Page | 227 228 229 230 231 232 233 234 235 236 237 238  | Next Page >