Search Results

Search found 8228 results on 330 pages for 'card reader'.

Page 232/330 | < Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >

  • Unable to connect to network

    - by user33750
    Hey guys, I have a question. I have been having problems connecting a new netbook to my network at home. I have an Asus Eeepc 100HAB. I have tried to run a repair on the connection, uninstalled and re-installed the network card, made sure all of the drivers are up-to-date as well. Two caveats: I have a laptop that I recently switched to a wired connection because it wasn't connecting to the network as well, and the netbook connects to an unsecured network i found just fine, only having a problem getting into my home network. Passwords are correct, and the computer where the connection originates from is working fine as well. Any ideas?

    Read the article

  • 3 Monitors 2 different graphic cards

    - by Michael
    I am looking to add a third monitor to my workstation. I currently have 2 monitors connected to a geforce gt 120. I am wanting to find the cheapest solution on adding another monitor, I have a old ati x300 laying around and wanting to know if I would be able to use that to power the other monitor and if it would conflict with my other graphic card (I am not a gamer). What I want to do is have the at x300 power 1 monitor via dvi and the gt 120 power 2 monitors via vga and dvi. Thanks edit: im running windows 7 64bit

    Read the article

  • Html shows after submitting form and is nowhere to be found in php script.

    - by Kelbizzle
    Upon submitting this form on my site. It send me to a page that says. "Use Back - fill in all fields Use back! ! " But this html isn't in the mail script anywhere. Where could this be coming from? I started out using this contact form (http://www.ibdhost.com/contact/) then changed it a little. Here is the mail script. <?php session_start(); ?> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Sendemail Script</title> </head> <body> <!-- Reminder: Add the link for the 'next page' (at the bottom) --> <!-- Reminder: Change 'YourEmail' to Your real email --> <?php //the 3 variables below were changed to use the SERVER variable $ip = $_SERVER['REMOTE_ADDR']; $httpref = $_SERVER['HTTP_REFERER']; $httpagent = $_SERVER['HTTP_USER_AGENT']; $visitorf = $_POST['visitorf']; $visitorl = $_POST['visitorl']; $visitormail = $_POST['visitormail']; $visitorphone = $_POST['visitorphone']; //$notes = $_POST['notes']; //$attn = $_POST['attn']; $lookup = array( 'The Election Report' => 'http://www.mydowmain.net/', '5 Resons' => 'http://www.mydomain.net/', 'Report 3' => 'http://someotherurl3.com/', 'Report 4' => 'http://someotherurl4.com/', 'Report 5' => 'http://someotherurl5.com/', // et cetera for your other values ); $attn = trim($_POST['attn']); $url = $lookup[$attn]; //echo 'attn: ' . $attn . ', url:' . $url; die; //additional headers $headers = 'From: US <[email protected]>' . "\r\n"; //$headers .= 'BCC: [email protected]' . "\r\n"; $todayis = date("l, F j, Y, g:i a") ; $subject = "your lead has downloaded a report."; $subjectdp = "Someone has downloaded a report!"; $notes = stripcslashes($notes); $message = "Dear PAl Affiliate,\n\nA prospective lead of yours has downloaded a report from our Website.\nAny contact information they have left and a link to the report they downloaded\ncan be found below. This is the perfect opportunity for you to open up a line of\ncommunication with the prospect and find out their intrests! If you have any questions\nabout this email please feel free to email us at [email protected]\n\n\nFrom: $visitorf $visitorl ($visitormail)\nTelephone Number: $visitorphone \nReport Downloaded:$url\n \n\nBest regards,\nThe Crew"; //$message = "$todayis [EST] \nAttention: \nMessage: $notes \nFrom: $visitorf $visitorl ($visitormail) \nTelephone Number: //$visitorphone \nReport Downloaded:$url\nAdditional Info : IP = $ip \nBrowser Info: $httpagent \nReferral : $httpref\n"; $messagedp = "A Visitor has just downloaded a report. You can find their contact information below.\n \n ***********************************************************************\n From: $visitorf $visitorl\n Email: $visitormail\n Telephone Number: $visitorphone \n Report Downloaded:$url\n \n \n Best regards,\n The Crew\n"; $messagelead = "Dear, $visitorf\n \n \n We appreciate your interest. Below you will find the URL to download the report you requested.\n Things are always changing in costa rica , so check back often. Also, check us out on Facebook & Twitter \n for daily updates. If there is anything we can do at anytime to enhance your experience, please do\n not hesitate to contact us.\n \n To download your report simply click on the link below. (You must have Adobe Reader or an alternative PDF reader installed)\n \n *** Download Link ***\n $url\n"; //check if the function even exists if(function_exists("mail")) { //send the email mail($_SESSION['email'], $subject, $message, $headers) or die("could not send email"); } else { die("mail fucntion not enabled"); } //send the email to us mail('[email protected]', $subjectdp, $messagedp); //send the email to the lead mail($visitormail, 'Thanks for downloading the report!', $messagelead, $headers); header( "Location: http://www.mydomain.com/thanks_report.php" ); ?> </body> </html>

    Read the article

  • Error installing Windows7 64 bits on VirtualBox

    - by MetaDark
    I am trying to set up Windows in Virtual Box, so I don't need to reboot in the rare occasion that I actually need it. The problem is, Virtual Box doesn't preform any errors when I insert the 32bit installation CD but when I try to use the 64bit installation; What!? I am already using the installation disc! I've checked my BIOS to see if I have SVM (AMD's version of VT) disabled and all I see is "Enabled" I have a K9N6PGM2-V2 motherboard A Triple Core AMD Athlon II A Nvdia NForce 430 integrated graphics card 4GB of RAM An 80GB IDE And a 1TB SATA I don't think the last three specifications matter but just in case XP I am pretty sure the CD isn't broken ( I am going to make sure in just a moment ), what could be the cause to this problem? Edit: The 64bit installation CD is not broken, but I found out when trying to install from the 32bit version that it's trying to upgrade, not preform a fresh install - Odd.

    Read the article

  • Has anyone ever encountered a Monad Transformer in the wild?

    - by martingw
    In my area of business - back office IT for a financial institution - it is very common for a software component to carry a global configuration around, to log it's progress, to have some kind of error handling / computation short circuit... Things that can be modelled nicely by Reader-, Writer-, Maybe-monads and the like in Haskell and composed together with monad transformers. But there seem to some drawbacks: The concept behind monad transformers is quite tricky and hard to understand, monad transformers lead to very complex type signatures, and they inflict some performance penalty. So I'm wondering: Are monad transformers best practice when dealing with those common tasks mentioned above?

    Read the article

  • How to get Atheros ar242x wireless adapter working under Debian Linux?

    - by Mark
    Does anybody know how to get the Atheros ar242x wireless adapter working under Debian Linux (5.0.2 and/or 5.0.3)? My Debian live CDs and install CDs both don't like this card at all. Curisouly, it seems to work on other, Debian-based, Linuxes. Is this a free/non-free Driver issue? I know Debian gets mardy about that. Although for what it's worth, the Live CD doesn't seem to detect my wired LAN connection either... Specifically this is on a Samsung R610 laptop (some version of which seem to have an intel wireless adapter - this one definitely doesn't!) I've tried all sorts of things but obviously on a live CD installing software is limited. I've also tinkerering with network config files and kernel modules etc but to no avail.

    Read the article

  • Laptop VGA Out Stopped Working

    - by Jack7890
    I regularly use an external monitor with my laptop. Today, when I booted up, the external monitor refused to work--it just keeps going into power save mode. I tried a different external monitor and had the same problem, so it must be a problem with the laptop itself. Things I've tried: Going into the Display Settings via the Control Panel (I'm running Vista) and attaching/unattaching/reattaching the external monitor. Turning the computer off, unplugging, plugging it back in, and rebooting Blowing into the VGA out to get rid of any dust Toggling through the Fn+F7 options I'm thinking maybe this is an issue with my video card? If necessary, I'm comfortable opening up my laptop and playing around with things, but I'm not sure what to look for. Does anyone have any suggestions?

    Read the article

  • Excel 2010 Access to path is denied temp

    - by Chris Anderson
    I am using excel data reader to read data from an excel file. FileStream stream = File.Open(filePath, FileMode.Open, FileAccess.Read); //1. Reading from a binary Excel file ('97-2003 format; *.xls) IExcelDataReader excelReader = ExcelReaderFactory.CreateBinaryReader(stream); //2. Reading from a OpenXml Excel file (2007 format; *.xlsx) IExcelDataReader excelReader = ExcelReaderFactory.CreateOpenXmlReader(stream); http://exceldatareader.codeplex.com/ This reads excel 1997-2003 format and excel 2007 format on my local machine and when we move it to our test server. However, when moved to production, it works for excel 97-2003 files, but when I try to read 2007 files I receive the following error: Access to the path 'C:\Documents and Settings\PORTALS03\ASPNET\LOCALS~1\Temp\TMP_Z129388041687919815' is denied. How is it possible that the 97-2003 excel file can be read but the 2007 files throw access is denied?

    Read the article

  • Secondary Monitor won't Display at Full Resolution with Primary Display Disconnected

    - by Laramie
    I have had a bad day. Among today's events, the LCD display on my Dell E6500 notebook failed. It had been working with a secondary monitor connected through a VGA cable at 1600x900 resolution until I removed the LCD from my notebook for repair. Now the max resolution available on the secondary display is 1024x768. If I reconnect the burned out primary display, the secondary monitor is again available at 1600x900. The video card is an onboard Mobil Intel 4. How can I maintain the secondary display at 1600x900 with the primary display disconnected (for repair)? Edit: I just noticed that when Windows boots, it displays at the correct resolution and I can see my desktop in all its glory for a couple seconds then reverts to 1024x768.

    Read the article

  • javascript binding

    - by Michael
    MyObj = { ajax: null, init: function() { this.ajax = Cc["@mozilla.org/xmlextras/xmlhttprequest;1"].createInstance(); this.ajax.onload = function() { return function() {this.onload.apply(this, [null]);} }; }, onload: function () { Reader.log("I really hope I can use `this.ajax` here"); } } isn't it correct way to bind onload to MyObj? For some reason onload never called. However if I avoid binding and just put this.ajax.onload = this.onload then onload invoked. How to get binding work?

    Read the article

  • 912 stream processor available in OpenCL

    - by tugrul büyükisik
    I am thinking of assembling this system: AMD CPU (A8-3870 APU which has Radeon HD 6550D inside: 400 stream processors:xxx GFLOPS) nearly 110$ AMD Graphics card: HD 7750 (512 stream processors:819 GFLOPS peak performance) nearly 170$ Appropriate ram (1600MHz bus) Mainboard What GFLOPS level can I reach as a stable mode with using OpenCL and similar programs? Can I use all 912 stream processors at the same time? I am not trying to do a VS question. I need to know what could be better for scientific computing (%75 of the time) and gaming (%25 of the time) because I have a low budget. With "scientific calculations" I mean fluid dynamics/solid state physics simulating; with games I mean those that need openCL and PhysX.

    Read the article

  • OEM Office 2010 without media - how to reinstall?

    - by Bryan
    I have recently purchased a new office desktop PC from Dell with OEM version of Windows 7 Pro and Office 2010 Pro. One of the reasons I always use Dell is that they always supply installation media CDs or DVDs, unlike some other companies that just give you ISO images on the hard disk that you have to burn yourself. This is the first PC I have purchased with Office 2010 Pro (OEM), and I was disappointed to see that Dell don't ship out any installation media for office 2010, they just supply a piece of card with the office pro product key printed on it. If the HDD fails completely and I have to perform a clean installation, how can I re-install office? Can I download the trial version of Office 2010 and install that, then offer it my product key? Bearing in mind that the product key is an OEM product, not a retail product, would this work?

    Read the article

  • Laptop monitor goes black under intense graphics

    - by drahcir
    I have a dell inspiron 1520 with a nvidia GeForce 8600M GT video card. I have Windows 7 professional as an operating system. Yesterday when I was using it the screen started to somewhat flicker then go completely black. I restarted it and in the boot screen everything seems fine, when I entered the login screen it became flickery again, and when I logged in, when a couple of windows popped up it went black again. I hooked it up to a tft monitor and the monitor works fine, and did some more tests that confirmed that under higher graphics causes the laptop monitor to go black. Is there a reason why this is happening?

    Read the article

  • Laptop VGA Output Stopped Working

    - by Jack7890
    I regularly use an external monitor with my laptop. Today, when I booted up, the external monitor refused to work--it just keeps going into power save mode. I tried a different external monitor and had the same problem, so it must be a problem with the laptop itself. Things I've tried: Going into the Display Settings via the Control Panel (I'm running Vista) and attaching/unattaching/reattaching the external monitor. Turning the computer off, unplugging, plugging it back in, and rebooting Blowing into the VGA out to get rid of any dust Toggling through the Fn+F7 options I'm thinking maybe this is an issue with my video card? If necessary, I'm comfortable opening up my laptop and playing around with things, but I'm not sure what to look for. Does anyone have any suggestions?

    Read the article

  • Hypertransport sync flood error

    - by Carl B
    What is it? And what causes it? Is it only for uncorrectable DIMM Errors(Troubleshooting DIMM errors)? When an UCE occurs, the memory controller causes an immediate reboot of the system. During reboot, the BIOS checks the Machine Check registers and determines that the previous reboot was due to an UCE, then reports this in POST after the memtest stage: A Hypertransport Sync Flood occurred on last boot 3 BIOS reports this event in the service processor’s system event log (SEL) as shown in the sample IPMItool output There are what seems to be some suggested answers to include Bad Caps Bios verisons (happens in one version not the other) Graphics card issues Lack of power to the CPU The list of possible generators seems to target everything but the computer case. System Specs: Windows Home Premium 64 Motherboard - MSI790FX-GD70 (MS7577) / Bios v 1.9 (American Megatrensa Inc) Ram - Patriot G Series ‘Sector 5’ Edition 4GB DDR3 1600 CPU - AMD Phenom II X2 555 Black Edition Callisto 3.2GHz Socket AM3 80W (Note: unlocked 2 cores CPU Z ids it as phenom II x4 B55) Graphics - 2 x Radeon 5750 in crossfire PSU - ABS 900w HDDs - 2 Seagate 1.5 TB Sata SSD - 1 OCZ 120 GB Vertex Plus R2

    Read the article

  • Embedding generic sql queries into c# program

    - by Pooja Balkundi
    Okay referring to my first question code in the main, I want the user to enter employee name at runtime and then i take this name which user has entered and compare it with the e_name of my emp table , if it exists i want to display all information of that employee , how can I achieve this ? using System; using System.Collections.Generic; using System.Linq; using System.Windows.Forms; using MySql.Data.MySqlClient; namespace ConnectCsharppToMySQL { public class DBConnect { private MySqlConnection connection; private string server; private string database; private string uid; private string password; string name; //Constructor public DBConnect() { Initialize(); } //Initialize values private void Initialize() { server = "localhost"; database = "test"; uid = "root"; password = ""; string connectionString; connectionString = "SERVER=" + server + ";" + "DATABASE=" + database + ";" + "UID=" + uid + ";" + "PASSWORD=" + password + ";"; connection = new MySqlConnection(connectionString); } //open connection to database private bool OpenConnection() { try { connection.Open(); return true; } catch (MySqlException ex) { //When handling errors, you can your application's response based //on the error number. //The two most common error numbers when connecting are as follows: //0: Cannot connect to server. //1045: Invalid user name and/or password. switch (ex.Number) { case 0: MessageBox.Show("Cannot connect to server. Contact administrator"); break; case 1045: MessageBox.Show("Invalid username/password, please try again"); break; } return false; } } //Close connection private bool CloseConnection() { try { connection.Close(); return true; } catch (MySqlException ex) { MessageBox.Show(ex.Message); return false; } } //Insert statement public void Insert() { string query = "INSERT INTO emp (e_name, age) VALUES('Pooja R', '21')"; //open connection if (this.OpenConnection() == true) { //create command and assign the query and connection from the constructor MySqlCommand cmd = new MySqlCommand(query, connection); //Execute command cmd.ExecuteNonQuery(); //close connection this.CloseConnection(); } } //Update statement public void Update() { string query = "UPDATE emp SET e_name='Peachy', age='22' WHERE e_name='Pooja R'"; //Open connection if (this.OpenConnection() == true) { //create mysql command MySqlCommand cmd = new MySqlCommand(); //Assign the query using CommandText cmd.CommandText = query; //Assign the connection using Connection cmd.Connection = connection; //Execute query cmd.ExecuteNonQuery(); //close connection this.CloseConnection(); } } //Select statement public List<string>[] Select() { string query = "SELECT * FROM emp where e_name=(/*I WANT USER ENTERED NAME TO GET INSERTED HERE*/)"; //Create a list to store the result List<string>[] list = new List<string>[3]; list[0] = new List<string>(); list[1] = new List<string>(); list[2] = new List<string>(); //Open connection if (this.OpenConnection() == true) { //Create Command MySqlCommand cmd = new MySqlCommand(query, connection); //Create a data reader and Execute the command MySqlDataReader dataReader = cmd.ExecuteReader(); //Read the data and store them in the list while (dataReader.Read()) { list[0].Add(dataReader["e_id"] + ""); list[1].Add(dataReader["e_name"] + ""); list[2].Add(dataReader["age"] + ""); } //close Data Reader dataReader.Close(); //close Connection this.CloseConnection(); //return list to be displayed return list; } else { return list; } } public static void Main(String[] args) { DBConnect db1 = new DBConnect(); Console.WriteLine("Initializing"); db1.Initialize(); Console.WriteLine("Search :"); Console.WriteLine("Enter the employee name"); db1.name = Console.ReadLine(); db1.Select(); Console.ReadLine(); } } }

    Read the article

  • How to quickly switch monitors on multi-monitor setup?

    - by Saxtus
    At my desktop PC, I have 3 displays hooked up on my Palit GeForce GTX 480 to extend my desktop: DVI: Samsung SyncMaster T220 (22" 16:10, 1680x1050, as my main) DVI: Samsung SyncMaster 940BF (19" 4:3, 1280x1024) HDMI: Sony Bravia KDL-32D3000 (32" 16:9, 1360x768) As expected, the GFX card can only utilize 2 of the displays at any given time, so I have to manually switch using Windows' "Display Properties" dialog, each time I want to switch between them. I've tried UltraMon, DisplayFusion and PowerStrip (so please don't refer me to a question where those are given as solutions) but they are unable to switch monitors. Instead they can only change display resolutions and settings on the existing active monitors, with specially weird results when I've saved the monitor states and then tried to switch monitors using the saved states! Any idea on how to bypass the awful "Display Properties" dialog and it's "confirm your change" timer?

    Read the article

  • "Verifying DMI Pool" hang caused by raid array..

    - by Ling
    Hi Experts, I have a problem, I obtained a new server with 4 hard drives (2 500 gig, 2 two TB), and an adeptec RAID card. I arranged them in two arrays with RAID 1 (500 gigs together as primary and the 2 TB drives for lots of data). When both arrays are configured, the server hangs while booting at message "Verifying DMI Pool", however if I remove the second array from the configuration the server boots fine. I have checked they are both on different channels, I have disabled all other peripherals from the boot menu and ensured the hard drive is #1. I have booted into the linux rescue mode and checked that it is reading both arrays fine. What else could be causing these problems? Thanks

    Read the article

  • How can I take browser screenshots at a higher resolution than my browser supports?

    - by Joshua Carmody
    I need to take a screenshot of a website as it would appear on a very high resolution monitor... say 4000x3000 pixels. My laptop's screen has a native resolution of 1400x768. Basically, I need to simulate having a monitor resolution much higher than my monitor and video card actually supports. I want the screenshot of the site to look pretty much how it does when you hit CTRL MINUS (zoom out) in Firefox repeatedly, but without any loss of pixels due to scaling. How can I do this? Is there some way to use virtual machine software to simulate a super-high-res display? If not, is there some way to open a browser window bigger than the screen, and then capture its contents as a PNG somehow? Anything else that might work?

    Read the article

  • How to set up a wireless AP with a linux box and SOCKS proxy

    - by user50455
    I've got: (1) Linux box (Arch linux to be precise, but that doesn't really matter) (2) Ethernet connection on it (say, eth0) (3) Socks proxy on a remote site (say, remote :port), which can be accessed through (2) (4) Wireless card on local linux box (say, eth1) So, the task is: create a wireless access point using (4) on local site (1) in such a way that all connections from it will go through proxy (3). E.g., when one simply connects to that AP (well, there should be DHCP or something for that) and goes to serverfault.com, all the traffic goes through that SOCKS proxy. I'm just asking for the digging direction and some references, not step-by-step tutorial. Thanks in advance

    Read the article

  • 10 gigabit or 1 gigabit switch

    - by Guntis
    We are planning to move mysql to dedicated box. At this moment we have web servers and mysql is running on each. Question is: cheaper is to buy 10G switch and put 10G network card into mysql server. Or buy normal gigabit switch and connect mysql box to switch with multiple network cables. In 1G scenario then we give each web server different mysql IP address. I don't think, that mysql box with one 1G link is enough to to satisfy multiple web box mysql traffic. At this moment we have 3 servers witch are running mysql/web. Plan is to add fourth server for mysql only. Thanks. Edit: if we buy 1G switch with mini-GBIC ports. Can we put in mini-GBIC 10G connectors and then connect mysql box to that port?

    Read the article

  • Best motherboard power supply combo for backblaze server

    - by jin14
    Building a backblaze server as described in this article. http://blog.backblaze.com/ So 45 hard drives in one box. I'm making it a MSDPM 2010 server so I actually don't even need raid cards in there as MSDPM will figure out how to use all of the hard drives on it's own. So need to know what motherboard, CPU, power supply I should get. Primary hard drive : SSD 128GB Storage : 45 1.5GB sata drives OS : windows 2008 Backup software : Microsoft System center Data protection server 2010 Need to know Which mother board to buy which will support 45 SATA hard drives. Don't need a raid card. Which power supply can power all 45 hard drives, 1 ssd drive, motherboard. Best set of equipment that meets my needs wins

    Read the article

  • Rails CSV import, adding to a related table

    - by Jack
    Hi, I have a csv importing system on my app (used locally only) which parses the csv file line by line and adds the data to the database table. This is based on a tutorial here. require 'csv' def csv_import @parsed_file=CSV::Reader.parse(params[:dump][:file]) n = 0 @parsed_file.each_with_index do |row, i| next if i == 0 #ignore the first row course = Course.new course.title = row[0] course.unit_code = row[1] course.course_type = row[2] course.value = row[3] course.pass_mark = row[4] if course.save n = n+1 GC.start if n%50==0 end flash.now[:message] = "CSV Import Successful, #{n} new courses added to the database." end redirect_to(courses_url) end This is all in the courses controller and works fine. There is a relationship that courses HABTM years and years HABTM courses. In the csv file (effectively in row[5] to row[8]) are the year_id s. Is there a way that I can add this within the method above. I am confused as to how to loop over the 4 items and add them to the courses_years table. Thank you Jack

    Read the article

  • Why does my PDF ask for a password after being retrieved from Visual SourceSafe?

    - by Schnapple
    PREFACE: Yes we're moving away from VSS in the next few months. One of my web projects contains, as one of its files, a PDF. The PDF on our QA site is being pulled from VSS. A QA tester recently told me he's being prompted for a password when he tries to open it. VSS says the file I have on disk is different than the one it has, so I updated it, but afterwards it's still being shown as different. So basically VSS is mangling my PDF and the results are so wobbly that Adobe Acrobat Reader is confused and thinks it has a password. I've tried adding it as Auto-Detect and as Binary. Same results. Why does my PDF ask for a password after being retrieved from Visual SourceSafe and how can I prevent it?

    Read the article

  • ASP.net - Crystal Reports exporting to PDF adds the letter "i" to certain words randomly

    - by CraigF
    We are using Crystal Reports to generate pdf's of customer bills (from a CR template). It works fine except the engine seems to be adding the letter "i" to random words in the output. Certain alignment problems are also evident (words overlapping etc). Standard fonts are being used. We are using .net 4 and C# linked to the 10.5 CR assemblies. Latest version of Adobe Acrobat reader is installed on the server. We have now tried this via 12.2 CR assemblies with the same results. We have also tried multiple .rpt files with the same results.

    Read the article

< Previous Page | 228 229 230 231 232 233 234 235 236 237 238 239  | Next Page >