Search Results

Search found 39224 results on 1569 pages for 'content delivery network'.

Page 233/1569 | < Previous Page | 229 230 231 232 233 234 235 236 237 238 239 240 | Next Page >

Debian/Ubuntu - No network connection

- by leviathanus

I have a very weird situation on my Ubuntu 12.04 LTS Server. I can not access (ping) my gateway, although I believe my config is ok - I attach the outputs. Any hints where to look? (I changed the beginning of the IP to something different, just obfuscation) ping 5.9.10.129 PING 5.9.10.129 (5.9.10.129) 56(84) bytes of data. From 5.9.10.129 (5.9.10.129) icmp_seq=2 Destination Host Unreachable From 5.9.10.129 (5.9.10.129) icmp_seq=3 Destination Host Unreachable From 5.9.10.129 (5.9.10.129) icmp_seq=4 Destination Host Unreachable uname -r 3.2.0-29-generic ifconfig eth0 eth0 Link encap:Ethernet HWaddr 3c:97:0e:0e:54:d7 inet addr:5.9.10.142 Bcast:5.9.10.159 Mask:255.255.255.224 inet6 addr: fe80::8e70:5aff:feda:c4ac/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1216 errors:0 dropped:0 overruns:0 frame:0 TX packets:490 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:107470 (107.4 KB) TX bytes:34344 (34.3 KB) Interrupt:17 Memory:d2500000-d2520000 ip route default via 5.9.10.129 dev eth0 metric 100 5.9.10.128/27 via 5.9.10.129 dev eth0 5.9.10.128/27 dev eth0 proto kernel scope link src 5.9.10.142 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 5.9.10.129 0.0.0.0 UG 1000 0 0 eth0 5.9.10.128 5.9.10.129 255.255.255.224 UG 0 0 0 eth0 5.9.10.128 0.0.0.0 255.255.255.224 U 0 0 0 eth0 iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination UPD: Eric, this is how routing information looks on a working server: 0.0.0.0 78.47.198.49 0.0.0.0 UG 100 0 0 eth0 78.47.198.48 78.47.198.49 255.255.255.240 UG 0 0 0 eth0 78.47.198.48 0.0.0.0 255.255.255.240 U 0 0 0 eth0 As I understand it, Hetzner tries to ensure security by this, so I can not take over an IP by changing my MAC. But this is another server, which has another netmask (255.255.255.240) UPD2: BatchyX, on the working server: 78.47.198.49 dev eth0 src 78.47.198.60 cache on the broken: 5.9.10.129 dev eth0 src 5.9.10.142 cache

Read the article
Network latency and speed of light

- by James

This was kinda of covered by the following Is minimum latency fixed by the speed of light? , but i would like to add the follow up a bit. The scenario is as follows; we have two opposing sites one on the West Coast of the US and one in Ireland. The customer is in central Europe, and has requested a latency test. Ireland gives responses of ~65-70ms. However the West Coast guys claim to be faster with a response of 60ms. Now a quick check says that light in fiber would take about 42ms to make the trip to the States and 8.5ms to Ireland. So obviously this is a single hop and does not include routers, switches, firewalls, protocol overhead etc. Would I be right to call BS on their figures? As a final note I tested a ping to Google IP address that was allegedly on the west coast from a site that covered a similar distance and was amazed to get a response time of 20ms. Suggesting ICMP packets that travel twice the speed of light. So A) what am I missing B) Am I right to suspect shenanigans? UPDATE: Guys thanks so far for your help and I have been reading various previous questions on this. About 5 years I had an issue where the hop from the UK to Ireland added 10ms of latency no matter what we did. In the end I moved the servers; So imagine my surprise when I have guys that claim they are 5ms faster with a transatlantic trip. So again should I call BS? Oh and assume both sites are normal mortals that don't have access to Google magical routing, warp dives or flux capacitors. :)

Read the article
other computer in the network cannot connect to mysql database

- by user28233

I have a vb.net program that uses mysql as its database. And it works when the computer has wampservr installed. But the program gets an unhandled exception error when the computer where its running does not have a wampserver. The only thing that is installed in it is the mysql connector net. How do I make it work. I just want the two programs to access the same mysql database. I already opened port 20 by configuring firewall. Both in TCP and UDP. What do I do? Do I have to tweak the codes? Anyone in here who have tried this before?

Read the article
other computer in the network cannot connect to mysql database

- by user23950

I have a vb.net program that uses mysql as its database. And it works when the computer has wampservr installed. But the program gets an unhandled exception error when the computer where its running does not have a wampserver. The only thing that is installed in it is the mysql connector net. How do I make it work. I just want the two programs to access the same mysql database. I already opened port 20 by configuring firewall. Both in TCP and UDP. What do I do? Do I have to tweak the codes? Anyone in here who have tried this before?

Read the article
display HTML content from database with formatting in it

- by Gaurav Sharma

Hi all, I have used wmd-editor in my cakephp v1.3 application. The config which I have written is as follows: wmd_options = { output: "HTML", lineLength: 40, buttons: "bold italic | link blockquote code image | ol ul heading hr", autostart: true }; When I submit the form the HTML in the wmd enabled textarea is saved in the database with htmlentities() done to the text then I am displaying it with html_entity_decode() method. but the text is displayed as it is including the HTML coding like this <p><strong>hello dear friends</strong></p>\n\n<pre><code>I want to make sure that everything that you type is visible clearly.\nadasfafas\n</code></pre>\n\n<blockquote>\n <p>sadgsagasdgxcbxcbxc</p>\n</blockquote>\n\n<p><em>sadfgsgasdsgasgs</em></p>\n\n<p><b><a href="http://kumu.in">this is the link</a></b></p> Please help me solve this problem Thanks

Read the article
SafeOffice 500 - how to enable VPN access to another network (out)

- by Dani

Hi, I have a safe office 500 box at my edge. (checkpoint's hardware firewall) I'm trying to connect to another office VPN using windows 7 pptp connection. It fails (saying something about enabling GRE). (after authenticating, hangs for a while, than give the error message.) Using the same computer with direct internet access (not behind the firewalls) works fine and I get connected. how do I setup the safe office to enable me to use vpn (pptp) out connections.

Read the article
Disable option never goes away for network adapters

- by mathee

Hi, guys, I'm running Windows 7. Whenever I disable the wireless adapter, the "Disable" option does not change to "enable". Similarly, for the "Local Area Connection", when I click on "Disable", the adapter gets disabled, but the "Disable" option remains. In summary, I am never offered the option to enable an adapter.

Read the article
Best way to connect a desktop computer to a 3g network

- by dbyrne

A friend of mine is moving to a building with no Internet connectivity. Ethernet and wifi are out of the question. What is the best way for him to get his desktop connected? The most obvious solution is for him to get an unlimited 3G data plan. What is the best way for him to set this up? I am assuming he should get something like Verizon's MiFi 3G access point, but does this have an ethernet jack?

Read the article
parse content away from structure in a binary file

- by Jeff Godfrey

Using C#, I need to read a packed binary file created using FORTRAN. The file is stored in an "Unformatted Sequential" format as described here (about half-way down the page in the "Unformatted Sequential Files" section): http://www.tacc.utexas.edu/services/userguides/intel8/fc/f_ug1/pggfmsp.htm As you can see from the URL, the file is organized into "chunks" of 130 bytes or less and includes 2 length bytes (inserted by the FORTRAN compiler) surrounding each chunk. So, I need to find an efficient way to parse the actual file payload away from the compiler-inserted formatting. Once I've extracted the actual payload from the file, I'll then need to parse it up into its varying data types. That'll be the next exercise. My first thoughts are to slurp up the entire file into a byte array using File.ReadAllBytes. Then, just iterate through the bytes, skipping the formatting and transferring the actual data to a second byte array. In the end, that second byte array should contain the actual file contents minus all the formatting, which I'd then need to go back through to get what I need. As I'm fairly new to C#, I thought there might be a better, more accepted way of tackling this. Also, in case it's helpful, these files could be fairly large (say 30MB), though most will be much smaller...

Read the article
Add additional content to the middle of string from within a method

- by Sammy T

I am working with a log file and I have a method which is creating a generic entry in to the log. The generic log entry looks like this: public StringBuilder GetLogMessage(LogEventType logType, object message) { StringBuilder logEntry = new StringBuilder(); logEntry.AppendFormat("DATE={0} ", DateTime.Now.ToString("dd-MMM-yyyy", new CultureInfo(CommonConfig.EnglishCultureCode))); logEntry.AppendFormat("TIME={0} ", DateTime.Now.ToString("HH:mm:ss", new CultureInfo(CommonConfig.EnglishCultureCode))); logEntry.AppendFormat("ERRORNO={0} ", base.RemoteIPAddress.ToString().Replace(".", string.Empty)); logEntry.AppendFormat("IP={0}", base.RemoteIPAddress.ToString()); logEntry.AppendFormat("LANG={0} ", base.Culture.TwoLetterISOLanguageName); logEntry.AppendFormat("PNR={0} ", this.RecordLocator); logEntry.AppendFormat("AGENT={0} ", base.UserAgent); logEntry.AppendFormat("REF={0} ", base.Referrer); logEntry.AppendFormat("SID={0} ", base.CurrentContext.Session.SessionID); logEntry.AppendFormat("LOGTYPE={0} ", logType.ToString() ); logEntry.AppendFormat("MESSAGE={0} ", message); return logEntry; } What would be the best approach for adding additional parameters before "MESSAGE="? For example if I wanted to add "MODULE=" from a derived class when the GetLogMessage is being run. Would a delegate be what I am looking for or marking the method as virtual and overriding it or do I need something entirely different? Any help would be appreciated.

Read the article
Measuring cumulative network statistics per user or per process

- by zsimpson

I've been googling for hours -- Under Linux I want to know the cumulative bytes sent and received by user or by process over all ip protocols. The best I've found in my searches is that it's possible to use iptables to mark packets for a user, for example: iptables -t mangle -A OUTPUT -p tcp -m owner --uid-owner test -j MARK --set-mark 1 It appears that "tc" can then shape traffic with that but I just want the statistic -- I don't want to shape the traffic. I want something like: "user U has transmitted used XMB since time Y". I can't figure out how to get statistics from these marked packets. Also, I've looked at nethogs but they seem to be measuring the instantaneous flow and I need cumulative counts. Anyone have ideas?

Read the article
What program sent which packet to the network [closed]

- by Erik Johansson

I would like to have a tcpdump like program that shows which program sent a specific packet, instead of just getting the port number. This is a generic problem I've had on and off sometimes when you have and old tcpdump file lying around you have no way to find what program was sending that data.. The solution in how i can identify which process is making UDP traffic on linux ? is an indication that I can solve this with auditd, dTrace, OProfile or SystemTap, but doesn't show how to do it. I.e. it doesn't show the source port of the program calling bind().. The problem I had was strange UDP packets, and since those ports are so short lived it took me a while to solve this issue. I solved this by running an ugly hack similar to: while true; date +%s.%N;netstat -panut;done So either a method better than this hack, a replacement for tcpdump, or some way to get this info from the kernel so I can patch tcpdump. EDIT: This was asked on superuser "tracking what programs sends to net", no good solution though.

Read the article
SQL 2008 network logon

- by gledhilla

Hi I have a domain controller that I have installed active directory onto and have set up an account that I want to use for my SQL server installation on another computer that is linked onto the domain. I can search for the account in active directory and I am able to select it into the add new user section in MSSMS, however, when I click add I get 'Windows NT user or group 'DOMAIN\user' not found. Check the name again. (Microsoft SQL Server, Error: 15401) I have googled the Error code and I havent found a solution that has fixed the error. If you have any help I would be greatful Thanks :)

Read the article
Sharing storage between servers

- by El Yobo

I have a PHP based web application which is currently only using one webserver but will shortly be scaling up to another. In most regards this is pretty straightforward, but the application also stores a lot of files on the filesystem. It seems that there are many approaches to sharing the files between the two servers, from the very simple to the reasonably complex. These are the options that I'm aware of Simple network storage NFS SMB/CIFS Clustered filesystems Lustre GFS/GFS2 GlusterFS Hadoop DFS MogileFS What I want is for a file uploaded via one webserver be immediately available if accessed through the other. The data is extremely important and absolutely cannot be lost, so whatever is implemented needs to a) never lose data and b) have very high availability (as good as, or better, than a local filesystem). It seems like the clustered filesystems will also provide faster data access than local storage (for large files) but that isn't of vita importance at the moment. What would you recommend? Do you have any suggestions to add or anything specifically to look out for with the above options? Any suggestions on how to manage backup of data on the clustered filesystems?

Read the article
Need help with local network printing while using VPN on Ubuntu 10.10 desktop

- by MountainX

I can print to my HP printer via the LAN when I'm not connected to the VPN. When connected to the VPN, printing fails. OpenVPN 2.1.0 x86_64-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Jul 12 2010 I can ping the printer while connected to the VPN: $ ping 192.168.100.12 PING 192.168.100.12 (192.168.100.12) 56(84) bytes of data. 64 bytes from 192.168.100.12: icmp_req=1 ttl=255 time=9.17 ms --- 192.168.100.12 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss... $ ping HpPrinter.local PING HpPrinter.local (192.168.100.12) 56(84) bytes of data. 64 bytes from HpPrinter.local (192.168.100.12): icmp_req=1 ttl=255 time=0.383 ms --- HpPrinter.local ping statistics --- 4 packets transmitted, 4 received, 0% packet loss... But here's the error when I try to print while connected to the VPN: hpijs[9990]: io/hpmud/jd.c 784: mdns lookup HpPrinter.local retry 1... ... hpijs[9990]: io/hpmud/jd.c 784: mdns lookup HpPrinter.local retry 20... hpijs[9990]: io/hpmud/jd.c 780: error timeout mdns lookup HpPrinter.local hpijs[9990]: io/hpmud/jd.c 88: unable to read device-id hp[9982]: io/hpmud/jd.c 784: mdns lookup HpPrinter.local retry 1... ... hp[9982]: io/hpmud/jd.c 784: mdns lookup HpPrinter.local retry 20... hp[9982]: io/hpmud/jd.c 780: error timeout mdns lookup HpPrinter.local hp[9982]: io/hpmud/jd.c 88: unable to read device-id hp[9982]: prnt/backend/hp.c 745: ERROR: open device failed stat=12: hp:/net/Officejet_Pro_L7600?zc=HpPrinter I am running iptables rules, but the problem doesn't appear related to the firewall. I've tested with no rules (i.e., no firewall). The printing problem happens when the VPN is connected. I can guess it is an mdns problem, but searching google about mdns didn't turn up anything that seemed related to this (at my level of knowledge). Any suggestions?

Read the article
Django - serving and managing permissions for static content

- by kRON

I have certain documents that I want to limit access to through Django to authorized users with permissions only. If I'm going to use Django as a proxy to serve static files in a view, what are the implications? I'm used to serving static files in Apache and configuring that my media is served without any handlers, but what happens if someone starts downloading 500mb through my Django proxy? Will my Django thread be locked for that user until he recieves the 500mb response?

Read the article
How to let users edit list<T> content?

- by iTayb

I'm making an aspx page that can edit books. A book is an complex class with lots of properties. I've made an edit page for most of them, however I'm having trouble with showing edit options for my Sellers Proprety. It is an list<Seller> object. Seller is as follows: public class Seller { private string sellerName; private double price; } How can I print a list to the screen, and let the clinet edit it, then load it back to the object? Thank you very much.

Read the article
jQuery Cycle Plugin - Content not cycling

- by fmz

I am setting up a page with jQuery's Cycle plugin and have four divs set to fade. I have the code in place, the images set, but it doesn't cycle properly. Firefox says there is a problem with the following code: <script type="text/javascript"> $(document).ready(function() { $('.slideshow').cycle({ fx: 'fade' }); }); </script> Here is the html: <div class="slideshow"> <div id="mainImg-1" class="slide"> <div class="quote"> <h2>Building Big Relationships with Small Business.</h2> <p>“This is quote Number One.<br /> They are there when I need them the most.”</p> <p><span class="author">Jane Doe – Charlotte Flower Shop</span></p> <div class="help"><a href="cb_services.html">Let Us Help You</a></div> </div> </div> <div id="mainImg-2" class="slide"> <div class="quote"> <h2>Building Big Relationships with Small Business.</h2> <p>“This is quote Number Two.<br /> They are there when I need them the most.”</p> <p><span class="author">Jane Doe – Charlotte Flower Shop</span></p> <div class="help"><a href="cb_services.html">Let Us Help You</a></div> </div> </div> <div id="mainImg-3" class="slide"> <div class="quote"> <h2>Building Big Relationships with Small Business.</h2> <p>“This is quote Number three.<br /> They are there when I need them the most.”</p> <p><span class="author">Jane Doe – Charlotte Flower Shop</span></p> <div class="help"><a href="cb_services.html">Let Us Help You</a></div> </div> </div> <div id="mainImg-4" class="slide"> <div class="quote"> <h2>Building Big Relationships with Small Business.</h2> <p>“This is quote Number Fout.<br /> They are there when I need them the most.”</p> <p><span class="author">Jane Doe – Charlotte Flower Shop</span></p> <div class="help"><a href="cb_services.html">Let Us Help You</a></div> </div> </div> Here is the CSS: .slideshow { width: 946px; height: 283px; border: 1px solid #c29c5d; margin: 8px; overflow: hidden; z-index: 1; } #mainImg-1 { width: 946px; height: 283px; background: url(../_images/main.jpg) no-repeat 9px 9px; } #mainImg-2 { width: 946px; height: 283px; background: url(../_images/main.jpg) no-repeat 9px 9px; } #mainImg-3 { width: 946px; height: 283px; background: url(../_images/main.jpg) no-repeat 9px 9px; } #mainImg-4 { width: 946px; height: 283px; background: url(../_images/main.jpg) no-repeat 9px 9px; } #mainImg-1 .quote, #mainImg-2 .quote, #mainImg-3 .quote, #mainImg-4 .quote { width: 608px; height: 168px; float: right; margin: 80px 11px 0 0; background: url(../_images/bg_quoteBox.png) repeat-x; } Before you go off and say, "hey, those images are all the same". You are right, the images are all the same right now, but the text should be rotating as well and there is a slight difference there. In addition, the fade should still show up. Anyway, you can see the dev page here: http://173.201.163.213/projectpath/first_trust/index.html I would appreciate some help to get this cycling through as it should. Thanks!

Read the article
Network speed between a VM and another machine which is not residing on the same host, is 11MB/s at most

- by Henno

Problem Network speed between a VM and another machine which is not residing on the same host, is 11MB/s at most. Topology Facts ESXi5 version is 5.0.0.504890 VM has the latest Vmware Tools installed VM is using E1000 network driver Physical box has Win Srv 2008 R2 as the OS CrystalDiskMark says the drive on physical box can read/write 100MB/s vCenter is another vm on esx both vm and physical box are showing 1Gbps link speed Configuration Networking shows vmnic0 as 1000 Full NTttcp is a client/server tool from Microsoft for measuring pure network throughput Here's what I've done so far: Test1: VM is running Filezilla FTP Server (default settings, one user account made) Physical box is running Filezilla FTP Client (default settings) Physical box is uploading a big file to FTP server Transfer speed (as observed by Windows Task Manager on both machines): ~11MB/s (bad) Physical box is downloading that file from FTP server Transfer speed (as observed by Windows Task Manager on both machines): still ~11MB/s (bad) Could it be disk performance issue? Test2: Physical box is running ntttcpr.exe -a 6 -m 6,0,VM_IP_ADDRESS VM is running ntttcps.exe -a 6 -m 6,0,PHY_BOX_IP_ADDRESS Transfer speed (as observed by Windows Task Manager on both machines): ~11MB/s (bad) Could it be switch performance issue? Test3: physical box is running vSphere Client I open Summary Storage datastore Browse Datastore... from physical box and upload a file to datastore Transfer speed (as observed by Windows Task Manager on physical box): ~26-36MB/s (good) Could it be a vm specific issue? Test4: Installed ntttcp to another vm on the same esx server Measured network performance between vms on the same esx server with NTttcp Transfer speed (as observed by Windows Task Manager on physical box): ~90-120MB/s (excellent :) Test5: I have another esx server on the same site, connecting to the same datastore and same switch. Those two ESX servers have both 2 NICs. One NIC goes to switch while the other goes directly to the other ESX server. vMotioned one of the testing vms off to the other ESX host Measured network performance between vms on different esx servers with NTttcp Transfer speed (as observed by Windows Task Manager on physical box): ~11MB/s (bad) While I'm aware of these: ESXi 4.1 slow file transfer ESXi 5 network performance is slow Debian Etch and ESXi slow network speeds VMWare ESXi slow file copy to guest they did not help (or I must have been missed something)

Read the article
How to move user content in Wix Installer

- by Simeon Pilgrim

To support Window Vista in my game, I have changed were the save files are placed (From under Program Files to My Documents) for both XP and Vista installations. Now I would like to be able to move the current XP users save games from the old location to the new location. I think I can correctly trigger this via the upgrade checking code like so: <Upgrade Id="PLACE-GUID-HERE"> <UpgradeVersion OnlyDetect="yes" Minimum="$(var.ProductVersion)" IncludeMinimum="no" Property="NEWERVERSIONDETECTED" /> <UpgradeVersion OnlyDetect="no" Minimum="1.1.0" IncludeMinimum="yes" Maximum="$(var.ProductVersion)" IncludeMaximum="no" Property="OLDERVERSIONBEINGUPGRADED" /> <UpgradeVersion OnlyDetect="no" Maximum="1.1.0" IncludeMaximum="no" Property="MOVESAVEFILESUPGRADED" /> </Upgrade> where 1.0.x was the old way and 1.1.x will be the new way, thus I could do something in a custom action based on MOVESAVEFILESUPGRADED, but the heart of the problem, I cant see how to move non-installed files from one location to another.

Read the article
Is Cherokee (probably) the best static content server for beginner sysadmins?

- by Bad Learner

I have read the pros and cons of most of the popular web servers and have come to a conclusion that Apache would (probably) be the best web server for serving dynamic content - - no wonder YouTube, Flickr and Facbook, among many others, use it. I do not know if that C10K problem applies to Apache even when serving dynamic content only, but I think any web server used to serve dynamic content needs some good tweaking for optimized performance, and the fact that nothing beats Apache when it comes to documentation, resources and support on the web, I think should will go with Apache for dynamic content. That apart, the confusion begins when it comes to choosing web servers for static content (including streaming videos). I see that Nginx, Cherokee and Lighttpd are among the best (I am not considering non-open source or non-linux stuff here). So, which too choose? I know one cannot go wrong with any of the three (Nginx, Cherokee, Lighttpd). Lighttpd's development has evidently gotten slower than it was a good time ago. The documentation is pretty good for all the three, and hopefully, so are the resources (knowledge of these among the users of Stackoverflow/Serverfault sites, the web etc). Precisely, and noting point [2] and [3], if I am not wrong, I should either go with Nginx or Cherokee. I would love to see someone clarify these... is Cherokee just as fast (mb/s), performant (connections/s), and reliable (think downtime/restarting server) as Nginx for serving static content and load balancing, for small, medium to large (and really large) websites and applications? (Think, the size of YouTube, Apache or Facebook.) if the answer for the Q above is a big "hell, yes!" then, I should probably prefer Cherokee, right? Because, since I am a beginner, it would a lot easier to setup Cherokee as it has a graphical admin user interface + really good documentation. Yes? I could be wrong, I could be right. I put down what I know so that you can offer most relevant advise. Pardon if anything I've said is offensive.

Read the article
Resolving loss of internet bandwidth in home network

- by Caspar

Recently, I've decided to connect my laptop at home to my modem/router through Ethernet cables built into my apartment. As these built-in Ethernet cables are usable via plugs built into the walls (called powerline adapters), I use some additional cabling (STP CAT6 cables) from my laptop/router to the plugs. In addition, I don't know any technical details about these built-in cables (as they're not visible), only the maximal bandwidth (1 GBit = Cat6?) that they're supporting. The built-in cables are Cat. 5e Ethernet cables. The problem is now that when I set up the connection, I cannot use the full bandwidth that my internet connection is actually offering (100 Mbit/s), only about 85 Mbit/s between 85 - 88 Mbit/s, despite the fact that all cables involved should support the maximal bandwidth. I know from other tests with one of the Ethernet cables in use that I can use almost 99 Mbit/s when I connect my laptop directly to the router/modem using only this one cable. In addition, it is very unlikely that the length of the resulting cable connection from my laptop to my router involving the built-in cables exceeds 100 m. So, what possible reasons for this loss of bandwidth exist? And how I can fix this issue? I hope this might help resolve the issue: The built-in cables appear to be Cat. 5e Ethernet cables. So, is there any problem when I connect Cat6 Ethernet cables directly to Cat5e Ethernet cables via the plugs?

Read the article
QTP read webtable content

- by allenzzzxd

Hello guys, I have a WebTable in QTP like: <TBODY> <TR></TR> <TR> <TD> <TABLE> <TR> <TD> <DIV class=divRow id=divRow_d_0> <DIV class=divFirst>1</DIV> <DIV class=divData>toto</DIV> <DIV class=divData>fofo</DIV> </DIV> <DIV class = divRow id=divRow_d_1>  </DIV> </TD> </TR> </TABLE> </TD> </TR> <TR></TR> </TBODY> Here, I want to capture the values divFirst and divData for each divRow, ideally, store every divRow in a string. Could someone please tell me how can I do that? Thanks a lot

Read the article
Regex: Getting content from url

- by farazshuja

i want to get "the-game" using regex from urls like http ://www.somesite.com.domain.webdev.domain.com/en/the-game/another-one/another-one/another-one/ http ://www.somesite.com.domain.webdev.domain.com/en/the-game/another-one/another-one/ http ://www.somesite.com.domain.webdev.domain.com/en/the-game/another-one/ Just created space after http, as its not allowing me to post more links

Read the article
Tool to indicate type of network connection

- by ggonsalv

I know of whoami.exe. Is there a version called whereami.exe The output should be able to tell me if I am on a LAN, wireless or VPN. the machines would be running Windows Xp or better.

Read the article

< Previous Page | 229 230 231 232 233 234 235 236 237 238 239 240 | Next Page >