Search Results

Search found 15923 results on 637 pages for 'static reflection'.

Page 233/637 | < Previous Page | 229 230 231 232 233 234 235 236 237 238 239 240  | Next Page >

  • My computer loses network connectivity every 30 minutes

    - by Logan Garland
    My LAN connected PC loses network connectivity every 30 minutes. It has a static IP address and I've checked to make sure there aren't any IP conflicts on my network. If I'm streaming from that PC to my Xbox the stream will be interrupted and it normally takes about a minute to come back online. The same happens if I'm actually on the PC and just browsing the web. I'm looking for suggestions on how to track down this issue. I've tried checking the available logs on my router to see if there is an issue with DCHP but have been unsuccessful in finding any evidence. Any suggestions would be helpful. I can't think of any recent changes to my network, PC or software installations that may have caused this. I am a software developer and have intermediate networking knowledge. EDIT: During one outage I told windows to troubleshoot the network problem and it said that it could automatically fix the problem by changing DCHP info. It basically said my network adapter from static to automatically obtain. This did fix the issue quicker than just waiting it out, but the outage occurred again 30 minutes later even when leaving those settings.

    Read the article

  • Re: How can Django/WSGI and PHP share / on Apache?

    - by Bogdan
    in response to: How can Django/WSGI and PHP share / on Apache? Hello, could you please post the complete config file from /sites-available I am having a problem seems like rewrite engine redirects all requests to django, so static and php files are not served and instead i see the django 404 page. If I get rid of rewrite rule then static files and php works. here is my apache config file from /sites-available <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /home/www/django <Directory /> Options +FollowSymLinks ExecCGI Indexes AllowOverride None DirectoryIndex index.php AddHandler wsgi-script .wsgi </Directory> RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ /mysite.wsgi/$1 [QSA,PT,L] ~ and my .wsgi file: import site site.addsitedir('/home/user/.virtualenvs/url.com/lib/python2.6/site-packages') import os, sys path = '/home/www/django' if path not in sys.path: sys.path.append(path) os.environ['DJANGO_SETTINGS_MODULE'] = 'mysite.settings' sys.path.append(path + '/mysite') import django.core.handlers.wsgi _application = django.core.handlers.wsgi.WSGIHandler() import posixpath def application(environ, start_response): # Wrapper to set SCRIPT_NAME to actual mount point. environ['SCRIPT_NAME'] = posixpath.dirname(environ['SCRIPT_NAME']) if environ['SCRIPT_NAME'] == '/': environ['SCRIPT_NAME'] = '' return _application(environ, start_response) the document root directory on disk (/home/www/django) contains php files, images, and the mysite.wsgi file.. thanks for your help

    Read the article

  • Migrating from "partial" Exchange 2003 to full Exchange 2003 usability

    - by TheCleaner
    I have a client that is using Exchange 2003 on SBS 2003 R2, but only for calendar sharing and contacts sharing. Their email is still coming to their clients via a POP3 account on each client's Outlook. I'd like to move them over to using Exchange for both email and the other things they are utilizing it for now. Can you folks guide me in the right direction? The setup: external domain is akin to domain.com (and is where they get their POP3 email from now) internal domain is akin to domain.local only simple hardware firewall (no ISA) static external IP is available to use My "assumptions": Setup SMTP default connector in Exchange for their existing external domain Have their existing email backed up to PST files (just in case) Setup the new MX records to point domain.com to the static external IP I'm a little confused how I'm going to setup their existing Exchange accounts with the proper SMTP address though. Right now it is just [email protected]. Do I just need to modify or create a new recipient policy? Are there other steps involved that I'm missing? Anyone with a walkthrough or even a basic "steps" is fine. I'm fairly used to Exchange 03, but I've been on Exchange 07 for a while now so going back is the weird part...plus I don't know what issues Exchange 03 on SBS has versus the normal "version". Thanks for all the help!

    Read the article

  • SQL Server 2008 R2 transactional replication over VPN

    - by enashnash
    I'm having difficulty setting up replication over a VPN. I have a SQL Server 2008 R2, Enterprise Edition database on a Windows 2008 R2 Server. SQL Server is running on a non-standard port. I have set it up so that it is acting as its own distributor and have configured a publisher on this server. It is set as an updatable transational publication (yes, this is necessary). On this server, I have Routing and Remote Access enabled in order to be able to establish VPN connections. It is configured with a static IP address pool, of which the first in the range is always assigned to the server. I have assigned a test user a static address within this range (I don't know if this is necessary or not). All clients will be 2008 R2 versions, but could be SQL Express or standalone developer instances of the full product. I can establish a VPN connection from the client without problems and can see that the correct IP addresses are allocated. After connecting to the database to test that I can establish a connection, I realised that I needed to be able to connect to the database using the server name rather than an IP address - required for replication - which wouldn't work initially. I created an entry in the hosts file for the server on the client using the NETBIOS name of the server, and now I can connect to the server, from the client, using the SERVER\INSTANCE, PORT syntax, over the VPN. As it is the default instance on the server, I can also connect with simply SERVER, PORT syntax. After all that, I still get the following dreaded error: SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'SERVER\INSTANCE'. (Replication.Utilities). What have I missed? How do I get this to work? TIA

    Read the article

  • Split horizon, route filtering, and having RIPv2 announce a non-attached route to host

    - by Paul
    Routers A, B & C live at 10.1.1.1, 10.1.1.2 and 10.1.1.3 on a /24 metro Ethernet subnet. Each router also has its own private subnet on another interface. Router B's private subnet links thru a firewall to a 10.20.20.0 network at another organization. Router B redistributes to A and C several static routes for hosts on 10.20.20.0. However, a new host 10.20.20.5/32 must be reached via a different path that goes through router C. I know that C can advertise this host-based route with no problem, but I'd like to keep all my 10.20.20.x static routes in one place. So, how can B tell A via RIPv2 to send packets for 10.20.20.5/32 to C? So far it looks like I need no ip split-horizon on router B's 10.1.1.2 interface, perhaps because B has already learned from C other routes with a next hop of 10.1.1.3. But how does RIPv2 split horizon with no auto-summary and network 10.0.0.0 really work? If B learns a route to ANY 10.x.x.x network or host from A or C, is that enough for split horizon to keep it from redistributing ip route 10.20.20.5 255.255.255.255 10.1.1.3? And if I want to suspend split horizon only for this one new host, how do I filter out the mess of regurgitated routes that B advertises when I try no ip split-horizon? Thanks much.

    Read the article

  • Making OpenSSL work on PHP Windows 2008 server with FastCGI

    - by KacieHouser
    I have been researching all day. Here is what I have done: In C:/PHP/php.ini and C:/PHP/php-cgi-fcgi.ini I have made the extension_dir = "C:/PHP/ext" I uncommented extension=php_openssl.dll I went to http://windows.php.net/download/ and got the thread safe version with the PHP 5.4 (5.4.8) version of DLL's In C:/PHP/ext I replaced the php_openssl.dll with the one I downloaded In System32 and SysWOW64 I added the following DLL's ssleay.dll libeay.dll I restarted the IIS server in the Server Manager under Web Server and stopped and started the World Wide Web Publishing Service That didn't work, so I tried same thing with the unthreaded versions. I still get: Fatal error: Call to undefined function ftp_ssl_connect() in C:\inetpub\wwwroot\REMOVED_dev\save_data.php on line 5 Here are related things from phpinfo(): System Windows NT DEV-WEB1 6.1 build 7601 (Windows Server 2008 R2 Standard Edition Service Pack 1) i586 Compiler MSVC9 (Visual C++ 2008) Architecture x86 Configure Command cscript /nologo configure.js "--enable-snapshot-build" "--enable-debug-pack" "--disable-zts" "--disable-isapi" "--disable-nsapi" "--without-mssql" "--without-pdo-mssql" "--without-pi3web" "--with-pdo-oci=C:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8=C:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8-11g=C:\php-sdk\oracle\instantclient11\sdk,shared" "--with-enchant=shared" "--enable-object-out-dir=../obj/" "--enable-com-dotnet" "--with-mcrypt=static" "--disable-static-analyze" "--with-pgo" Server API CGI/FastCGI Configuration File (php.ini) Path C:\Windows Loaded Configuration File C:\PHP\php-cgi-fcgi.ini Scan this dir for additional .ini files (none) Additional .ini files parsed (none) Registered PHP Streams php, file, glob, data, http, ftp, zip, compress.zlib, compress.bzip2, https, ftps, sqlsrv, phar Registered Stream Socket Transports tcp, udp, ssl, sslv3, sslv2, tls FTP support enabled Protocols dict, file, ftp, ftps, gopher, http, https, imap, imaps, ldap, pop3, pop3s, rtsp, scp, sftp, smtp, smtps, telnet, tftp openssl OpenSSL support enabled OpenSSL Library Version OpenSSL 0.9.8t 18 Jan 2012 OpenSSL Header Version OpenSSL 0.9.8x 10 May 2012 What am I missing here?

    Read the article

  • How to configure a Router (TL-WR1043ND) to work in WDS mode?

    - by LanceBaynes
    I have a WRT160NL router (192.168.1.0/24 - OpenWrt 10.04) as AP. It's: - WAN port: connected to the ISP - WLAN: working as an AP, using 64 bit WEP/SSID: "MYWORKINGSSID", channel 5, using password: "MYPASSWORDHERE" - It's IP Address is: 192.168.1.1 Ok! It's working great! But: I have a TL-WR1043ND router that I want to configure as a "WDS". (My purpose is to extend the wireless range of the original WRT160NL.) Here is how I configure the TL-WR1043ND: 1) I enable WDS bridging. 2) In the "Survey" I select my already working network. 3) I set up the encryption (exact same like the already working one) 4) I choose channel 5 5) I type the SSID 6) I disable the DHCP server on it. After I reboot the router and connect to this router (TL-WR1043ND) over wireless I'm trying to ping google.com. From the ping I see that I can reach this router, that's ok, but it seems like that this router can't connect to the original one, the WRT160NL (so I don't get ping reply from Google). The encryption settings/password is good I checked it many-many-many times. what could be the problem? I'm thinking it could be a routing problem, but what should I add to the "Static Routing" menu? I tried to change the IP address of the TL-WR1043ND to: 192.168.1.2 So if this a routing issue then I should add a static routing rule that says: If destination: any then forward the packet to 192.168.1.1 p.s.: I updated the Firmware to the latest version. It's still the same. p.s.2: The HW version of the TL-WR1043ND is 1.8 p.s.3: Could that be the problem that I use different routers? (If I would buy.. another TL-WR1043ND and use it instead of the WRT160NL, and with normal Firmware, not OpenWrt, then it would work?? The "WDS" is different on different routers?) p.s.4: I will try to check the router logs@night - and paste it here! :\

    Read the article

  • mod_wsgi, .htaccess and rewriterule

    - by hadaraz
    I'm using several django projects running on the same apache instance through mod_wsgi, configured with virtualhost for each site, see the httpd.conf here. For one of the sites I want to use static-cache (staticgenerator), so I set up a directory with .htaccess file which contains: RequestHeader unset X-Forwarded-Host RewriteEngine on RewriteBase / RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME}/index.html !-f RewriteRule ^(.*) http://127.0.0.1:3456/$1 [P] where 3456 is the django port on the server. Using this rewrite rule, the request is always forwarded to the mod_wsgi handler, even if the file or directory exists, and if the file index.html exists the request shows as request-path/index.html. I tried another setup: RequestHeader unset X-Forwarded-Host RewriteEngine on RewriteBase / RewriteCond $1 !-d RewriteCond $1index.html !-f RewriteRule ^(.*) http://127.0.0.1:3456/$1 [P] but got almost the same results. All requests are transferred to the mod_wsgi handler, but the request path is now the original one. To sum it up: What is the correct RewriteCond to use here? How do you transfer a request to the mod_wsgi handler? Is it the right way? If that's not the way to do it, then how do you serve static files from a directory when they exist, and when they don't you serve from apache/mode_wsgi? Thanks for your help.

    Read the article

  • on debian, lighttpd apache2 using 80 port, lighttpd throws :address already use error

    - by user1960581
    I bought the linode(linode.com) server the other day. I've been trying to run lighttpd and apache2 at the same port, using lighttpd for static files. As linode is only providing ONE ipv4 address, I tried to bind lighttpd on the ipv6 address. That's where I got the same error each and very single time: can't bind to port [ipv6] 80 Address already in use. I tried bind the ipv4 address. Everything worked. Please help me, this is driving me nuts for the last two days. my lighttpd.conf file:(the ipv6 address isn't true) server.modules = ( "mod_access", "mod_alias", "mod_compress", "mod_redirect", # "mod_rewrite", ) server.document-root = "/var/www" server.upload-dirs = ( "/var/cache/lighttpd/uploads" ) server.errorlog = "/var/log/lighttpd/error.log" server.pid-file = "/var/run/lighttpd.pid" server.username = "www-data" server.groupname = "www-data" server.port = 80 server.bind = "2600:3c02::0000" server.use-ipv6 = "enable" #server.pid-file = "/var/run/lighttpd.pid" index-file.names = ( "index.php", "index.html", "index.lighttpd.html" ) url.access-deny = ( "~", ".inc" ) static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) compress.cache-dir = "/var/cache/lighttpd/compress/" compress.filetype = ( "application/javascript", "text/css", "text/html", "text/plain" ) # default listening port for IPv6 falls back to the IPv4 port #include_shell "/usr/share/lighttpd/use-ipv6.pl " + server.port include_shell "/usr/share/lighttpd/create-mime.assign.pl" include_shell "/usr/share/lighttpd/include-conf-enabled.pl" ### ipv6 ### $SERVER["socket"] == "[2600:3c02::0000]:80" { # accesslog.filename = "var/log/lighttpd/ipv6/access.log" # server.document-root = "/var/www/" # server.error-handler-404 = "/index.php?error=404" } and the error message: can't bind to port, 2600:3c02::0000 Address already in use.

    Read the article

  • Ubuntu 12.04 Server - eth0 1Gbps NIC eth1 10Gbps NIC - all traffic using eth0?

    - by James
    Ubuntu Server 12.04.1 x64 Primary role is an NFS fileserver, for Mac OSX Clients. Hardware: Eth0: 00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 04) Eth1: 07:00.0 Ethernet controller: MYRICOM Inc. Myri-10G Dual-Protocol NIC Config: ifconfig eth0 Link encap:Ethernet HWaddr <MACADDRESS> inet addr:192.168.0.150 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:460042020 errors:0 dropped:148 overruns:0 frame:0 TX packets:231906707 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:581431978417 (581.4 GB) TX bytes:259057368617 (259.0 GB) Interrupt:20 Memory:f7d00000-f7d20000 eth1 Link encap:Ethernet HWaddr <MACADDRESS> inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6832208 errors:0 dropped:2 overruns:0 frame:0 TX packets:376 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:513826442 (513.8 MB) TX bytes:33688 (33.6 KB) Interrupt:59 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:507 errors:0 dropped:0 overruns:0 frame:0 TX packets:507 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:45057 (45.0 KB) TX bytes:45057 (45.0 KB) nano /etc/network/interfaces #The loopback network interface auto lo iface lo inet loopback #The primary network interface auto eth0 iface eth0 inet static address 192.168.0.150 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 dns-nameservers 192.168.0.1 8.8.8.8 #second network interface auto eth1 iface eth1 inet static address 192.168.0.100 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 dns-nameservers 192.168.0.1 8.8.8.8 Currently I am using on the OSX clients: nfs://192.168.0.100/Volumes/Storage to mount the NFS share. My problem is why would all the data (and I have checked using various monitoring tools bmon, iftop, glances, etc) be going over the slower connection?? Also, after configuring /etc/network/interfaces with the above setup I always get an error message at bootup something about waiting for network configuration. Are these connected?

    Read the article

  • How to give a user NTFS rights to a folder, via Powershell

    - by Don
    I'm trying to build a script that will create a folder for a new user on our file server. Then take the inherited rights away from that folder and add specific rights back in. I have it successfully adding the folder (if i give it a static entry in the script), giving domain admin rights, removing inheritance, etc...but i'm having trouble getting it to use a variable I set as the user. I don't want there to be a static user each time, I want to be able to run this script, have it ask me for a username, it then goes out and creates the folder, then gives that same user full rights to that folder based on the username i've supplied it. I can use Smithd as a user, like this: New-Item \\fileserver\home$\Smithd –Type Directory But can't get it to reference the user like this: New-Item \\fileserver\home$\$username –Type Directory Here's what i have: Creating a new folder and setting NTFS permissions. $username = read-host -prompt "Enter User Name" New-Item \\\fileserver\home$\$username –Type Directory Get-Acl \\\fileserver\home$\$username $acl = Get-Acl \\\fileserver\home$\$username $acl.SetAccessRuleProtection($True, $False) $rule = New-Object System.Security.AccessControl.FileSystemAccessRule("Administrators","FullControl", "ContainerInherit, ObjectInherit", "None", "Allow") $acl.AddAccessRule($rule) $rule = New-Object System.Security.AccessControl.FileSystemAccessRule("Domain\Domain Admins","FullControl", "ContainerInherit, ObjectInherit", "None", "Allow") $acl.AddAccessRule($rule) $rule = New-Object System.Security.AccessControl.FileSystemAccessRule("Domain\"+$username,"FullControl", "ContainerInherit, ObjectInherit", "None", "Allow") $acl.AddAccessRule($rule) Set-Acl \\\fileserver\home$\$username $acl I've tried several ways to get it to work, but no luck. Any ideas or suggestions would be welcome, thanks.

    Read the article

  • client flips between internal and external IP addresses??

    - by jmiller-miramontes
    I have what seems like a not-particularly-complicated home network, all things considered: a DSL line comes in to a modem/router, which goes off to a switch, which supports a bunch of machines. My machines live in a 192.168.0.x address space; however, I'm running some public servers on the network, so I have a block of 8 (5, really) static IP addresses that are mapped to the servers by the router. The non-servers get 192.168.0.x addresses via NAT; some machines have static addresses and some get addresses from DHCP. Locally, I'm running a DNS server (named) to map between the domain names and the 192.168 address space. Somewhat messy, but everything basically works. Except: One of my local non-server clients occasionally switches from its internal address to its external address. That is, if I check the logs of a website I'm running internally, the hits coming from this client sometimes show up with the internal 192.168 address, and sometimes with the external (216.103...) address. It will flip back and forth for no apparent reason, without my doing anything. This can be a problem in terms of how the clients interact with the way I have some of the clients' SSH systems configured (e.g., allowing access from the internal network but not the external network), but it also Just Seems Wrong. I will confess that I'm kinda skating on the very edge of my networking competence here, but I can't for the life of me figure out what's going on. If it helps, the client in question is running Mac OS X / 10.6; its address is statically assigned, is not one of the five externally-accessible addresses, and gets its DNS from (first) the internal DNS server and (second) my ISP's DNS servers. I can't swear that none of the other NAT clients are also showing this problem; the one I'm dealing with is my everyday machine, so this is where I run into it. Does anybody out there have any advice? This is driving me crazy...

    Read the article

  • Ubuntu 12.04 - Pound Reverse Proxy and Adobe Flex/Flash Auth

    - by James
    First time posting, I have a completely fresh install of ubuntu 12.04 Client as a reverse proxy gateway to our internal network. Our setup is we have one external ip but three domains we would like to point to various webservers on our internal network. It's not so much a load balancing issue or cacheing etc. Merely routing some Client browsers to a port 80 webpage (to adhere to some stricter corporate policies regarding placing port numbers after domain names). I have gone with pound and everything seems to be working fine. Static pages load etc. Everything is good with the exception of a Flash/Flex based WebClient for a Digital Asset Management program. The actual static page loads fine, it is just at the moment of entering credentials, be they correct or incorrect, and hitting login, there is no response whatsoever. Either a rejection or confirmation etc. So the request back to the internal server can't be getting through. I have googled extensively and there might be a solution in a crossdomain.xml file? Documentation isn't very clear. And we are not the authors of the DAM app, and have no control over the code on the Flash/Flex side. Questions: Is there a particular config file/solution for pound that allows Flash/Flex auth information to be forwarded? Is there another reverse proxy program (nginx?)that allows this type of config? Am I looking at this the entire wrong way, should Flash/Flex fundamentally not be allowed to have this access?

    Read the article

  • pfsense single MAC is listed with several IP's in ARP table

    - by Tillebeck
    I have this problem: arp table filling up But I am quite sure that I cannot blame Kaspersky. Scenarie: a user plugs his computer in. He waits and waits but are getting no IP by DHCP. Then he is told there is an IP conflict... He end up assigning himself a static IP to access the net In the ARP table of the router I see: 192.168.24.144 00:16:41:42:3c:9e Lenovo LAN 192.168.24.145 00:16:41:42:3c:9e Lenovo LAN 192.168.24.181 00:16:41:42:3c:9e Lenovo LAN 192.168.24.150 00:16:41:42:3c:9e Lenovo LAN 192.168.24.151 00:16:41:42:3c:9e Lenovo LAN 192.168.24.152 00:16:41:42:3c:9e Lenovo LAN 192.168.24.156 00:16:41:42:3c:9e Lenovo LAN 192.168.24.157 00:16:41:42:3c:9e Lenovo LAN 192.168.24.159 00:16:41:42:3c:9e Lenovo LAN 192.168.24.160 00:16:41:42:3c:9e Lenovo LAN 192.168.24.130 00:16:41:42:3c:9e Lenovo LAN 192.168.24.132 00:16:41:42:3c:9e Lenovo LAN 192.168.24.164 00:16:41:42:3c:9e Lenovo LAN 192.168.24.137 00:16:41:42:3c:9e Lenovo LAN 192.168.24.140 00:16:41:42:3c:9e Lenovo LAN 192.168.24.206 00:16:41:42:3c:9e Lenovo LAN The last .206 is the static address he gave himself. Several users descripe the exact same problem. It started after removing some filters in the switches, så all users are on a LAN and can see each other. Before, when filters blocked access to each others comptuers no one reported this kind of behavior. Any idéeas?

    Read the article

  • Windows Server 2003 DHCP not handing out IPs

    - by SnOrfus
    I'm trying to setup a home server (to tinker with) as a domain controller. I've setup the domain and I've installed DHCP and setup a scope without any exclusions (with the default range of 192.168.0.1-254). My client machine is a Windows 7 (RC) machine and it has a connection but can't get an IP address. Even if I try setting the IP to a static 192.168.0.2 and there is still no connectivity. I can ping it from the server, but pinging the server from the client just times out. The only thing between the server and the client is a 24 port switch (D-Link DES-1024D). edit Ok, it turned out that the interfaces were setup backwards in the NAT settings (the internal nic connection was set to public and the external nic connection was set to private). I changed this and all was OK.... sort-of. Problem is now: If I set a static ip on the client (where I am typing this from) all is fine. BUT; when I set it to get it from DHCP, I get a correct IP from the server (192.168.0.2) but there is no internet on the client; but I can still ping the server fine from the client (which makes sense cause I was able to get an IP from it). edit I ended up just removing the Routing and DHCP server roles and just going with ICS for the time being until I get my hands on some better learning tools.

    Read the article

  • How to redirect all Internet traffic to OpenVPN Server

    - by JuliaS
    I have seen working solutions around the issue of forcing Internet traffic to go through the OpenVPN server but they are all done in Linux, all I want to know is how to add an entry to the route table in windows to make this happen. connectivity between the client and server is fine, my Windows 7 client can establish a connection to the Windows 2008 Server, but when established Internet traffic is still going from the local Windows 7 machine. Here are the details: Server: Windows 2008 Server with one NIC OpenVPN IP Address: 192.168.0.1 Local NIC IP Address (connects the server to the Internet): 10.242.69.107 Client: Windows 7 with one NIC OpenVPN IP Address: 192.168.0.2 ISP allocated IP Address: 10.0.8.2 (gateway 10.0.8.1) Server OpenVPN Config: dev tun ifconfig 192.168.0.1 192.168.0.2 secret static.key push "redirect-gateway def1" Client OpenVPN Config: remote xxx.xxx.com dev tun ifconfig 192.168.0.2 192.168.0.1 secret static.key I'm not an expert with adding routes...etc. I would be grateful if someone could let me know how to add this entry in my server/client route table. EDIT: Output from the client's netstat -rnv IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.0.8.1 10.0.8.2 20 10.0.8.0 255.255.255.252 On-link 10.0.8.2 276 10.0.8.2 255.255.255.255 On-link 10.0.8.2 276 10.0.8.3 255.255.255.255 On-link 10.0.8.2 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.252 On-link 192.168.0.2 286 192.168.0.2 255.255.255.255 On-link 192.168.0.2 286 192.168.0.3 255.255.255.255 On-link 192.168.0.2 286 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.0.8.2 276 224.0.0.0 240.0.0.0 On-link 192.168.0.2 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.0.8.2 276 255.255.255.255 255.255.255.255 On-link 192.168.0.2 286 ===========================================================================

    Read the article

  • Failed to bring up eth1 in a dual ips solution in ubuntu

    - by lxyu
    I'm using ubuntu 12.04. I tried to assign two ips to two ethernet cards in my server. The content of /etc/network/interfaces is like this: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 114.80.156.a netmask 255.255.255.224 gateway 114.80.156.b auto eth1 iface eth1 inet static address 114.80.156.c netmask 255.255.255.240 gateway 114.80.156.d a b c d have different values, which means the two ips are in different vlans. But I can only bring up eth0 with this command: $ /etc/init.d/networking restart RTNETLINK answers: File exists Failed to bring up eth1. ...done. I have checked the question here which shows the same problem like the one I encountered: Can only bring up one of two interfaces But it seems it's not really solved. And in my situation, I need the 2 ips to use 2 different gateways. So how to fix this problem? Edit1, changed the example config ip from 192.168.0.0/16 subnet to another 'real' subnet. Edit2, the purpose of doing this is fairly simple. Because the ip range I previous in don't have more room for new servers, and I have to move to another ip range. So I want to make the public servers bind to 2 ips for the transition period. I only have really limited knowledge about routing and subnet. @BillThor @rackandboneman, would you please give me some keywords or links on how to setup route for 2 ips? and @Mike Pennington, how do you know I speak chinese?

    Read the article

  • Can't connect to a Hyper-V VM from anywhere but the host OS

    - by Elbelcho
    I have an unusual situation on hand where I'm able to connect to a Hyper-V guest VM from the HOST, but not from anywhere but the host. The VM is running WIn2k8R2 and has IIS installed and Remote Desktop enabled. If I browse to the IP from the host OS, the IIS7 page displays. I can also RDP into the guest OS from the host as well as ping. From OFF the host, RDP, web and ping all fail. If I completely shut off the guest VM's firewall, ping will then start to respond, but all RDP and port 80 still don't. The physical host machine has 2 nics installed, but only one is plugged in. The one plugged in has a static IP. I have one Hyper-V virtual network and it's set to external. The guest VM has one NIC with a different static IP than the host, but both are on the same subnet. The host machine is joined to the domain, the guest VM is not. Any sugestions? Thanks so much for any help you may be able to provide!

    Read the article

  • Outside VPN traffic not able to ping site-to-site VPN remote site

    - by Siriss
    we have two ASA 5510s running 8.4 in a site-to-site VPN setup. All internal traffic is working smoothly. Site/Subnet A: 192.100.0.0 - local Site/Subnet B: 192.200.0.0 - remote VPN Users: 192.100.40.0 - assigned by ASA When you VPN into the network, all traffic hits Site A, and everything on subnet A is accessible. Site B however, is completely inaccessible for VPN users. All machines on subnet B, the firewall itself, etc... is not reachable by ping or otherwise. I know I am missing a NAT rule, and in 8.2, it was easy as pie to setup using ASDM, but now I can't get it for the life of me as 8.4 apparently made a lot of changes to NAT rules. I am not too comfortable in the ASA command line, but if there is a command I need to add or if you could direct me where I can add this in 8.4 ASDM I would really appreciate it. I have tired NAT Exempt, Static NAT, Static NAT Policies, etc... I think I tried all the options. I also might have my interfaces confused with the new look at feel of ASDM. Thank you much in advance and I hope I have been thorough enough.

    Read the article

  • Windows Server 2003 DHCP not handing out IPs

    - by SnOrfus
    I'm trying to setup a home server (to tinker with) as a domain controller. I've setup the domain and I've installed DHCP and setup a scope without any exclusions (with the default range of 192.168.0.1-254). My client machine is a Windows 7 (RC) machine and it has a connection but can't get an IP address. Even if I try setting the IP to a static 192.168.0.2 and there is still no connectivity. I can ping it from the server, but pinging the server from the client just times out. The only thing between the server and the client is a 24 port switch (D-Link DES-1024D). edit Ok, it turned out that the interfaces were setup backwards in the NAT settings (the internal nic connection was set to public and the external nic connection was set to private). I changed this and all was OK.... sort-of. Problem is now: If I set a static ip on the client (where I am typing this from) all is fine. BUT; when I set it to get it from DHCP, I get a correct IP from the server (192.168.0.2) but there is no internet on the client; but I can still ping the server fine from the client (which makes sense cause I was able to get an IP from it). edit I ended up just removing the Routing and DHCP server roles and just going with ICS for the time being until I get my hands on some better learning tools.

    Read the article

  • apache2: ssl_error_rx_record_too_long when visiting port 80? help!

    - by John
    Hi, I have an Ubuntu 10 x64 server edition machine. I got a second IP and configured /etc/network/interfaces like so (actual IPs and gateways removed): [code] auto lo iface lo inet loopback iface eth0 inet dhcp auto eth0 auto eth0:0 iface eth0 inet static address [ my first IP ] netmask 255.255.255.0 gateway [ my first gateway ] iface eth0:0 inet static address [ my second IP ] netmask 255.255.255.0 gateway [ my second gateway ] [/code] /etc/apache2/ports.conf: [code] Listen 80 NameVirtualHost [ my first IP ]:80 NameVirtualHost [ my second IP ]:80 # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 NameVirtualHost [ my first IP - some site is running SSL successfully using it ]:443 Listen 443 [/code] /etc/apache2/sites-enabled/mysite.conf: [code] ServerName mysite.com Include /var/www/mysite.com/djangoproject/apache/django.conf [/conf] [/code] Then when visiting http[mysite].com:80 or http[mysite].com (:// removed because serverfault doesn't allow me to post hyperlinks), I get: [code] An error occurred during a connection to [mysite].com. SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long) [/code] My guess is that the configuration file is not being picked up, and apache is therefore looking for the default-ssl file, which is not in conf-enabled. If I were to configure that file properly, it seems I would successfully connect to whatever default directory is specified in the default-ssl file. But I want to connect to my website. Any ideas? Thanks in advance!

    Read the article

  • How can I get my routers to forward ports correctly?

    - by Giffyguy
    My network currently looks like this (simplified): Note that Router #2 is connected to the LAN interface of Router #1. This should be familiar to anyone who has seen a standard static-IP setup with an additional firewall for a residence or other small building. Router #1 is actually my cable gateway, but since it is a fully functional router/firewall, I am going to refer to it as a router. Now, I need to open various ports in both firewalls for incoming communication to my server - port 80 is a good example. So I've opened up port 80 in Router #2, and so far all incoming traffic at the public IP X.X.X.129 is being routed correctly. The problem is that I also need my server to respond to incoming traffic at the public IP X.X.X.130 on the WAN interface of Router #1. Naturally, I can't just tell Router #1 to forward port 80 to another public IP. Port forwarding is only supported when the traffic is being directed to the LAN subnet. I am willing to restructure my network topology if required, with the following conditions: Router #1 cannot have its WAN IP reassigned - X.X.X.130 is mandatory. Router #1 cannot be moved or disconnected from the cloud. The server cannot be given a second IP address. I would prefer the server to have a private IP address - e.g. 10.0.0.10 I'd like to keep Router #2, but it can have a private IP - e.g. 10.0.1.10 Following these rules, I need to get my server to receive incoming traffic on port 80 from both public IP addresses. Does anyone on SU know if this is possible? So far my only theories have been to set up a static route on either router, or to somehow combine my two subnets into a single subnet.

    Read the article

  • Secondary IP (eth0:0) acts like main server IP

    - by George Tasioulis
    I have a CentOS server, configured with 4 consecutive IPs: eth0 5.x.x.251 eth0:0 5.x.x.252 eth0:1 5.x.x.253 eth0:2 5.x.x.254 The problem is that all traffic goes out to the internet with eth0:0 (5.x.x.252) as the source IP, instead of eth0. # curl ifconfig.me 5.x.x.252 How can I fix this, so that all traffic goes out via eth0, ie my main IP? PS: My server is VPS running on a Xen dom0, the latter being configured in routed mode networking. Thanks in advance! Server configuration # ifconfig eth0 Link encap:Ethernet HWaddr 00:x:x:x:x:AE inet addr:5.x.x.251 Bcast:5.x.x.255 Mask:255.255.255.255 inet6 addr: fe80::x:x:x:x/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14675569 errors:0 dropped:0 overruns:0 frame:0 TX packets:9463227 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4122016502 (3.8 GiB) TX bytes:25959110751 (24.1 GiB) Interrupt:23 eth0:0 Link encap:Ethernet HWaddr 00:x:x:x:x:AE inet addr:5.x.x.252 Bcast:5.x.x.255 Mask:255.255.255.224 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:23 eth0:1 Link encap:Ethernet HWaddr 00:x:x:x:x:AE inet addr:5.x.x.253 Bcast:5.x.x.255 Mask:255.255.255.224 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:23 eth0:2 Link encap:Ethernet HWaddr 00:x:x:x:x:AE inet addr:5.x.x.254 Bcast:5.x.x.255 Mask:255.255.255.224 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:23 # cat /etc/hosts 127.0.0.1 localhost.localdomain localhost 5.x.x.251 [fqdn] [hostname] # cat ifcfg-eth0 DEVICE=eth0 BOOTPROTO=static ONBOOT=yes IPADDR=5.x.x.251 NETMASK=255.255.255.224 SCOPE="peer 5.x.y.82" # cat ifcfg-eth0:0 DEVICE=eth0:0 BOOTPROTO=static ONBOOT=yes IPADDR=5.x.x.252 NETMASK=255.255.255.224 # cat route-eth0 ADDRESS0=0.0.0.0 NETMASK0=0.0.0.0 GATEWAY0=5.x.y.82 # netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 5.x.y.82 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 5.x.x.224 0.0.0.0 255.255.255.224 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 5.x.y.82 0.0.0.0 UG 0 0 0 eth0

    Read the article

  • "ImportError: No module named flask" - Trouble with nginx + uWSGI + Flask in a virtualenv setup

    - by vjk2005
    I got nginx + uWSGI running on localhost inside a virtualenv with a simple hello world program, but I get this error when I replace the hello world with a simple Flask app: File "./wsgi_configuration_module.py", line 1, in <module> from flask import Flask ImportError: No module named flask unable to load app mountpoint Here's the flask app (wsgi_configuration_module.py): from flask import Flask application = Flask(__name__) @application.route("/") def hello(): return "hello world" if __name__ == "__main__": application.run() uWSGI config (app_conf.xml): <uwsgi> <socket>127.0.0.1:9001</socket> <chdir>/srv/www/labs/application</chdir> <pythonpath>/srv/www</pythonpath> <module>wsgi_configuration_module</module> <callable>application</callable> <no-site>true</no-site> </uwsgi> nginx config: server { listen 80; server_name localhost; access_log /srv/www/labs/logs/access.log; error_log /srv/www/labs/logs/error.log; location / { include uwsgi_params; uwsgi_pass 127.0.0.1:9001; } location /static { root /srv/www/labs/public_html/static/; index index.html index.htm; } } virtualenv stored in ~/virtual_env with Python 2.7 + nginx + uWSGI + Flask installed in a virtualenv called basic. Things I've tried to solve this: set the --home (-H) option to my virtualenv folder ~/virtual_env while running uWSGI. Other info: I have the same setup working outside of a virtualenv. Things go wrong only when I try to replicate the setup inside of a virtualenv. Where have I gone wrong?

    Read the article

  • Apache, suexec, PHP, suPHP

    - by Chris_K
    While I'm quite comfortable as a Linux user, my Linux Admin-fu is a bit weak. Thus, I'm here looking for guidance with a CentOS server I'm about to build. I need to setup an Apache2 web server for a few of our clients. I want each client's web content to be under their home directory (USERDIR in apache.conf, right?) for the static HTML sites. I want Apache to run as the client (suexec?). Some of their stuff will be PHP apps and I'm under the impression I'll want to look at suphp as well then. So basically I want to look like a small version of a shared web hosting company. Considering how common those are I thought I'd easily find a nice current How-To guide on setting this all up but so far I've had very little luck. I suspect my search words are off. So the questions (feel free to answer any or all): Anyone have some solid links to current/modern guides that would help me set this all up? No, the apache documentation site is not a guide ;-) Since I have a mix of static sites and PHP apps do I want/need both suexec and suphp installed? If so, does that introduce any challenges I should be aware of? Should I be looking at other options instead of suexec and suphp? I plan to give the end users SSH, SFTP or SCP access to their stuff (if that affects anything). Thanks in advance for your help.

    Read the article

< Previous Page | 229 230 231 232 233 234 235 236 237 238 239 240  | Next Page >