Search Results

Search found 20225 results on 809 pages for 'computer parts'.

Page 234/809 | < Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >

• Group policies - WSUS

  - by cory

  Hello, I am really lost as to what is the reason as to why my group policy is not working on my domain. I have setup a GPO for my wsus server to a specific OU in my domain. It seems as of right now, none of my machines have inherited that GPO. I have manually put it in quite a few computers. Most of my computers in the domain are linked up to my wsus server, but all my desired settings are not there. If I run gpresult /R, On one computer I ran this on, it is linking to my backup domain controller and not my main. On another computer I checked this on, it is linking to my main DC, but it did no inherit the GPO. When looking on my DC on gpmc - I see the policy is forced to the OU as #1 precedence. Thank for any help.

  Read the article

• Windows 7 freezes on boot screen

  - by this is a dead end

  There was some update that required me to restart my computer, so I did. when it restarted, it stays at the Windows boot screen forever, the screen that says "Starting Windows" and has that Windows logo in the middle. I've tried the start up repair program that shows up when I click F8 when the computer starts. And tried system restore but, it says it has restored windows successfully but it still freezes on the boot screen when I reboot it. When I try starting it in safe mode, it gets to the blue Windows background, the one with the logon screen, then says "Failure configuring Windows updates. Reverting Changes. Do not turn off." Then after a while it reboot by itself. Just noticed, the logo animation on the boot screen is still animated. So it's not completely frozen.

  Read the article

• Error 1603 when installing Microsoft Intellipoint 8.2 on Windows 7 x64

  - by HeB

  Installing MS Intellipoint 8.2 (for my MS touch mouse) on my Dell Inspiron 580 always gives the following error: "Setup must close because an error occurred. Verify that your computer meets the system requirements on the product packaging. Restart your computer and try running Setup again. If this error happens again, see Help for customer support options. (Error Code 1603)" I'm running Windows 7 x64 with all latest updates. MS solutions don't work. How to fix?

  Read the article

• Why is an Ext4 disk check so much faster than NTFS?

  - by Brendan Long

  I had a situation today where I restarted my computer and it said I needed to check the disk for consistancy. About 10 minutes later (at "1%" complete), I gave up and decided to let it run when I go home. For comparison, my home computer uses Ext4 for all of the partitions, and the disk checks (which run around once week) only take a couple seconds. I remember reading that having fast disk checks was a priority, but I don't know how they could do that. So, how does Ext4 do disk checks so fast? Is there some huge breakthrough in doing this after NTFS came out (~10 years ago)? Note: The NTFS disk is ~300 GB and the Ext4 disk is ~500 GB. Both are about half full.

  Read the article

• My 386sx refuses to start in cold days

  - by Armadillo

  My old computer refuses to start in cold days. So, in really hot days (about 40ºC / 104ºF ) or even hotter, this PC usually starts, but in cold days, it wont. When the temperature is not in the "sweet-spot" the power light turns on for an half a second and then the computer turns off. But when it's really cold, not even the power light turns on, nor even a blink. Sometimes I use an Hair dryer, pointed directly to the PSU and that works great. 5 to 10 minutes is enough, depending on the ambient temperature. I think something is going wrong in my AT power supply. I can't replace this PSU for another because it has a non-standard size and connectors to power the motherboard. Does anybody have a clue about what it's failing in my PSU, so I can change that component (resistor, capacitor, ??, etc) and rock on with my 80386? Thanks

  Read the article

• Server IP must be a LAN IP (Port Forwarding Netgear)

  - by rphello101

  I'm trying to set up a server (Apache) on my computer (fairly new to it). As I understand it, for it to be accessible to other computers, I need to forward port 80. When I try to forward the port though, I get the error: Server IP must be a LAN IP. I noticed in ipconfig that my default gateway is different than my wireless router. My computer is not hardwired, not on WiFi. Furthermore, I do not, at this point, have a static IP. I read that it should still work with a dynamic IP until it changes. Any ideas on what I can do?

  Read the article

• Having internet on a VirtualBox

  - by S4M

  I am running a linux laptop and I set up a VirtualBox under windows XP. My only problem is the VirtualBox doesn't seem to be connected to internet - When I do the connection diagnosis it tells me there is no connection. I am using an NAT adapter, and I bind the port 80 from my computer to the port 80 of the VirtualBox, and same for the ports 8080, but still no result. I would be grateful is someone could help me to sort this out. EDIT: thinking of it, what is making the problem hard - and painful - is the absence of error message. If I try to use a given adapter to share my computer's connection with the VirtualBox, and it doesn't work, I have no way to know why. So, it would be really helpful if someone could share a way to access this king of information (is there a log file somewhere or a way to run VirtualBox from command line in a verbose mode?).

  Read the article

• Empty DVD Drive indicates it has music in it (CDFS)

  - by Amado Colberg

  I have a Windows 7, 64 bit computer with a Blu-ray DVD drive. When I first start the computer, the DVD drive indicates it has music in it, but it is empty. If I put a CD in it, it will not Autoplay. But, if I open the drive and close it again, it will Autoplay and will no longer act as if it has a music CD in it. I've checked the drive with Plextor Utilities and it says it is working OK. I would appreciate any help with this.

  Read the article

• Updating, etc., automatically

  - by Steve D

  Is there a way to set up Ubuntu 12.04 (or earlier versions) so that all recommended updates are done automatically, say once a week? When I say automatically, I mean no password entry or user intervention required. This sounds like a stupid request, so let me tell why I'm asking. My grandfather knows nothing about computers; he uses his solely to read Yahoo! mail. I want to get rid of his clunky, spyware-ridden Windows XP and install Ubuntu. I want to set it up so when he turns the computer on, after a couple minutes, voila!, Yahoo! mail, already signed in, ready to go. The problem is I don't want to have to go over there every week or so and make sure everything is up-to-date, he hasn't accidentally installed any spyware, etc. So can this be done? Is this the best way to set things up for my grandfather? Are there other things I should be worried about when it comes to keeping things hassle-free for him? Please don't post anything like "why not teach him how to... blah blah blah". My grandfather is 80 years old and has made it clear email is the only thing he will ever use a computer for! Thanks!

  Read the article

• When load balancing, must all copies of static web page be exactly the same?

  - by Gilles Blanchette

  I am used to get answers for everything on the web, but not this time... Yesterday I enable Amazon DNS weight functionally to load balance 7 websites between two different IP addresses (split 50%-50%). Both servers run IIS 8.5, sites runs well on both sides. Today I found out that Google WebMasterTools is reporting fails error with file robots.txt, all close to 50% of access try errors. The robots.txt file is ok and accessible (even via Google testing URL page) on both servers. Lets say current version of static web pages are on the first computer and the updated version of the same web pages are on the second computer. Can it be the problem? When load balancing, can static web pages be slightly different from one host server to the other? Thank you for your help

  Read the article

• PC shuts down when installing ubuntu?

  - by Robin002

  I'm now using ubuntu from USB, and I'd like to install ubuntu on my hard disk. I tried the option of removing Vista while installing ubuntu. However, near the end of the installation process (presumably the end because I can see some slideshows on how to start using ubuntu), the screen suddenly goes to black with white words running around on it. Soon the computer shuts down. After that, restarting leads to a black screen with only a small white cursor on the top left corner. The cursor keeps blinking and nothing happens. I found that I can alternatively choose to boot with USB by hitting F12 just when the computer starts. So I tried to reinstall ubuntu by running ubuntu on USB. One of the options of installation is to update ubuntu 11.04 to ubuntu 11.04, so it seems the ubuntu is already installed somehow. Anyways, I tried both update and delete and install option but the same thing happens as the 1st time (sometimes before reaching the end), while I still cannot start my PC as ubuntu (without USB). How may I install ubuntu properly?

  Read the article

• Real time audio streaming

  - by Josh K

  I have a remote computer running OS X. I would like to stream the audio from the microphone input over the network so I can listen to it. Primarily I want to do this because I'm out of the office but still need to communicate with people there. I would like to use VLC, but am not fully aware of the options available. I tried SoundFly (as recommended by another answer) but this didn't seem to want to connect. At this point I should note that I'm using a VPN network to connect to the remote computer (using Hamachi). I can open up ports / etc fine though, so I should be able to do this. Alright, I found Nicecase which does exactly what I want but I would prefer to not have to shell out $40 for it.

  Read the article

• virtual machines: optimal host os to run Windows XP guest os?

  - by user61132

  My department doesn't have the budget to upgrade my ailing Dell D620 laptop. However, I do have the option to buy my own personal computer, then use my company-issued ISO image to run Windows XP as my guest os using virtualbox or vmware. Therefore, last month, I bought an Acer AX3910-U3012 desktop that had Windows 7 as the host os (and 8G RAM). In short, I was disappointed with the performance while trying to run WinXP as the guest os. (It didn't perform much better than my laptop.) Just wondering what the optimal host os would be for running Windows XP as the guest os? (No, I can't use my company-issued ISO image to build the os for my personal computer.) FWIW, I'm willing to spend up to $2k if it's REALLY worth it, but would prefer to spend no more than $1k. Also, in an effort to cut costs, I'd prefer buy a desktop instead of a laptop. Thanks for any/all feedback.

  Read the article

• formating a hard drive for use in an asus aspire one d250

  - by paynes_bay

  I have an Asus Aspire One D250 that's out of warranty and whose hard drive is giving the click of death. I'm trying to use a spare SATA HDD I have but am having some difficulty. I have a USB CD drive that I plugged into the computer but when I tried to boot off of a Windows XP SP3 install CD the hard drive wasn't recognized. I tried to format the hard drive in another computer and then plug the hard drive into the Asus Aspire and although this gets me to the Windows XP loading screen it crashes before it gets into Windows, itself. Even in Safe Mode. I also tried to install Windows XP off of a USB stick but it seemed to hang during the install process. As in the next day it was still in the blue screen installer. Any ideas?

  Read the article

• Windows Server 2003 Router, Good approach [closed]

  - by jM2.me

  Possible Duplicate: Windows Server 2003 Router with PortForwarding Situation We have Verizon Fios 25/25 Internet Connection, Server acting as a router, and around 12 office computers. Task Portforward port 29000 from office computer. Problem Once I connected wan and lan cables I just had to set static lan ip (on server) and plug in switch with office computers into second nic. Then just right click on wan nic and select share internet connection. All office computers were assigned with an IP address 192.168.0.XXX and Gateway 192.168.0.1 (server). Now I have to open port and portfoward it from computer 192.168.0.190 (static ip, manual). Using this guide http://www.rosscode.com/blog/index.php?title=port_forwarding_in_windows_2003&more=1&c=1&tb=1&pb=1 I faced a problem. Before enabling "RRA" I had to unshare internet connection (wan interface) and was able to setup network. Now how do I setup a network within "RRA" and share internet with private network? Thank you much

  Read the article

• Conflicts with MS Office temporary files when using Offline Folders on Vista

  - by Tambet

  We are using Offline Folders feature of Windows Vista to make files on network shares available when out of office. Mostly it is working, but every time I do a sync I get a lot of such errors: D500E7B8.tmp - A file was deleted on this computer and changed on the server while this computer was offline. There are hundreds of them. I always select all of them and choose resolution "Delete from both locations". But what is causing this and how can I avoid it? I suspect the reason is that we are using Debian and Samba (3.4.7) on our file server. I've been looking for some Samba options that would cure this, but with no success. I learned that probably the cause is, that both Word and Excel are using specific pattern to change files - they never change the original file, but instead always write a new temporary file and rename it to original file, when you click Save. This is documented here: http://support.microsoft.com/kb/211632/?FR=1.

  Read the article

• Is there any software that can capture the screen and turn it into a fake webcam input?

  - by rjmunro

  Is there any software that can capture the screen and turn it into a webcam-type input so that you can easily record and/or broadcast your screen with regular video software? Edit: Just to be clear, I'd like to be able to use it live as an input to video conferencing software as well as for making recordings with video editing software. Bonus points if it allows me to capture a screen remote from the computer that is sending the video (for example by connecting to another computer with VNC). So it should show up as an input alongside any webcams I have installed, but instead of being a camera, it should be whatever is on the screen.

  Read the article

• Windows 8.1 will not go back to sleep after waking up

  - by per

  I have problems putting Windows to sleep and starting the screen saver on my new Windows 8.1 machine. Sleep mode and screen savers work only when the computer is first powered up (or restarted). But once it goes to sleep (manually or automatically) and I wake it up later, it wont go back to sleep again and I can't use screen savers either. I updated the chipset and graphics card drivers. My computer isn't part of a homegroup either. Does anyone else have similar issues? Thanks for your advice, per

  Read the article

• What's the most reliable (i.e. time-proof) solution for organizing photos?

  - by digitxp

  I pooled together my photos from an old external hard drive, various Picasa Web caches, flickr, flash drives, and an old computer. They're all on my external hard drive, using extremely creative labeling, like allpictures pixix pix2 images familyphotos and so on (hey, I was 7 when I organized them last). My computer's hard drive can die at any minute, and the external is new but who knows what that means? I am planning to start reorganizing these picture, probably by face or time. I have Bridge CS5, Picasa, etc., but which one is the most likely to not crash and burn like my Vista laptop did with a ZIP file filled with pictures of a funeral?

  Read the article

• Fresh Ubuntu 12.10 install no desktop or wing bar

  - by Travis

  After a fresh installm of ubuntu 12.10 (complete erase) after logging in it appears i have no taskbar or much of anything, although i can still execute my terminal with CTRL+ALT+T. i looked around a little, seems i'm not the only person who has had this problem. I found here: http://ubuntuforums.org/showthread.php?p=12303179#post12303179 From there, i found myself here: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-updates/+bug/1068341 I followed precisely the instructions provided which were: this problem is solved this way Switch to a terminal (Ctrl-Alt-F1). Login as your username. Install linux source (sudo apt-get install linux-source) and headers (sudo apt-get install linux-headers-3.5.0-17-generic). Uninstall nvidia driver - this depends on which version you installed (sudo apt-get remove nvidia-current or sudo apt-get remove nvidia-current-updates or sudo apt-get remove nvidia-experimental-304). Reinstall nvidia driver (sudo apt-get install nvidia-current-updates). If it successfully installs, restart the computer (sudo shutdown -r now). Source Desktop does not show when I installed nvidia drivers! I have rebooted, and i am still having the exact same problem. so i back at square one. can someone help me please? this is my room mates computer and i told him i was "fixing" it and now i feel like i've ruined it. Any help is greatly appreciated. Thank you for your time.

  Read the article

• Shut down by pressing the power button twice

  - by iHarry

  I have set my laptop's power button to shut down the computer when it is pressed (Windows 7 x86). But I often hit the button accidentally, and it's a rare case that I'm able to actually prevent it from shutting down. I don't want to disable it though. Is there a way so that I get a confirmation whether I really want to shut down the computer (just like in Mac OS X Lion, where a confirmation appears when the power button is pressed)?. Is there some way to bring the same to Windows 7 (and 8)?

  Read the article

• Windows Server 2003: Nat Port Forwarding Not Working

  - by jM2.me

  The setup is following: Internet (108.99.XXX.XX) <- Windows Server 2003 (10.0.0.1) <- Switch <- Office Computers (10.0.0.100-200 some static routes some manual some automatic) Windows Server has NAT installed on it and two network interfaces are configured properly. The problem is, whenever I try to forward port 80 (or any other) from office computer (lets say 10.0.0.100), it fails. Nic #1 Settings: All settings are obtained from ISP Nic #2 Settings: Set manually IP: 10.0.0.1 Mask: 255.255.255.0 Nat Server is configured to automatically assign IP addresses to private network. Settings are: IP: 10.0.0.0 Mask: 255.255.255.0 Forwarding was done in Routing and Remote Access (local) - IP Routing - NAT/Basic Firewall - Local Area Connection (right click_properties) - services and ports - Web Server HTTP - Private Address: 10.0.0.100 SO what is causing the problem of failure to forward any port from other computer inside private network?

  Read the article

• Unable to remove/hide icons from desktop folder

  - by Kyomu

  I wish to hide some windows icons from my desktop folder1, but cannot. When I click delete, it says they will be deleted from my desktop (which they already are), but they remain visible in the desktop folder, which is where I wish them removed. Is there any way I can remove these? (I always use Win+E which really lets me get to all of these easy enough). Offending icons: Libraries, Homegroup, User folder, Computer, Network, Control Panel, and Recycle Bin. For those who might be wondering why, I find myself in this folder a bit to often (including when uploading a file), and find these nothing but clutter, especially as these always default to the top. Thanks for your help! 1 By desktop folder, I mean the folder you would see by going to "My Computer" and clicking "Desktop" on the top left under Favorites. Note: Changing my "Desktop Icon Settings" under "Personalize" does not affect the desktop folder, but rather just the desktop view.

  Read the article

• Trouble installing gnome-shell-extensions-user-theme, dependency/PPA conflict?

  - by Drex

  I installed gnome tweak tool, and am trying to set up custom themes and whatnot. So, trying to install gnome-shell-extensions-user-theme. me@computer:~$ sudo apt-get install gnome-shell-extensions-user-theme [sudo] password for me: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: gnome-shell-extensions-user-theme : Depends: gnome-shell-extensions-common but it is not going to be installed E: Unable to correct problems, you have held broken packages. Not going to be installed? Okay, let's see about that... me@computer:~$ sudo apt-get install gnome-shell-extensions-common Reading package lists... Done Building dependency tree Reading state information... Done gnome-shell-extensions-common is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Wait, what? Broken packages? Ruh Roh! Seems to me it might be a PPA contradiction problem or something, but I'm tired of trashing my installs. Kinda lost here. Any ideas? Output of sudo apt-get install -f drex@U110:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

  Read the article

• Options to Reformat USB Drive

  - by user8783

  I have a 64GB usb thumb drive. When I plug it into a Windows system (I have tried several machines with both Windows 7 and 8), the system attempts to read it and never completes. The drive does not show up in the device manager, nor does it appear in Computer Management - Disk Management. If I click on the "Safely Remove Hardware" icon, however, I do get an option for "Eject Mass Storage Media", although it never accomplishes anything. Also, as long as the USB drive is connected, I cannot access other USB drives or even restart my computer. It seems as though it locks up Windows Explorer. Is there any option to reformat this drive? It was a great drive up until all this craziness began and I would hate to throw it out because it was rather pricey.

  Read the article

< Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >