Search Results

Search found 6545 results on 262 pages for 'usb hub'.

Page 235/262 | < Previous Page | 231 232 233 234 235 236 237 238 239 240 241 242  | Next Page >

• HP DL160G6 bios update fails

  - by Bojo

  I tried to update the BIOS from my HP DL160G6's. Unfortunately the Windows update degraded my BIOS version from 243 to 237. But when I try to upgrade both servers to version the update fails. First I got a warning like: CMOS Layout difference between System ROM and ROM file has detected. AFU recommand (sic) adding /C commands of your original input commands. Press "A" to accept AFU's recommendation. Press "F" to keep original input commands. And the update did not do anything. But now I get a message like: Reading flash ........ done Bootblock checksum ... ok Module checksums ..... bad Error: BIOS checksum error And the update stops. I tried some commands form this page: http://www.ami.com/support/downloads/txt/AFU_README.TXT But I don't try to much, the servers are still booting. Does anyone know how to update my servers to BIOS version 245? I used this version http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3884344&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253DMTX_7bd12651ab954fdcb0d7ee164a%257CswEnvOID%253D54%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken and created a bootable USB stick sith HPQUSB.exe

  Read the article

• DriveImage XML fails with a Windows Volume Shadow Service Error

  - by Ssvarc

  I'm trying to image a SATA laptop hard drive, using DriveImageXML, that is attached to my computer via a USB adapter. I'm running Win7 Ultimate 64 bit. DriveXML is returning: Could not initialize Windows Volume Shadow Service (VSS). ERROR C:\Program Files (x86)\Runtime Software\Drivelmage XML\vss64.exe failed to start. ERROR TIMEOUT Make sure VSSVC.EXE is running in your task manager. Click Help for more information. VSSVC.EXE is running in Task Manager, as is VSS64.exe. Looking at the FAQ on the Runtime webpage this turned up: Please verify in Settings-Control Panel-Administrative Tools-Services that the following services are enabled: MS Software Shadow Copy Provider Volume Shadow Copy Also make sure you are able to stop and start these services. Possible reasons for VSS failures: For VSS to work, at least one volume in your computer must be NTFS. If you use only FAT drives, VSS will not function. The required NTFS volume does not need to be identical with the volume you want to image. You should make sure that VSSVC.EXE is running in your task manager. If the problems persist, registering "oleaut.dll" and "oleaut32.dll" using "regsvr32" might help. Both of those services are running and can be started and stopped without issue. Using "regsvr32" to register ""oleaut32.dll" returns successful, but "oleaut.dll" returns: The module "oleaut.dll" failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found. Some other information that might be relevant. Browsing to the drive is successful, but accessing certain folders returns an "access" error. Windows runs a permissions adder that adds the current user profile to the NFTS permissions. Could this be the cause of the issue? DriveImage XML is running as Administrator. Thoughts?

  Read the article

• "Dictionary problem." Error with VMPlayer

  - by George Mauer

  I'm pretty new to using vmware virtualization (been a virtualbox user) so I'm hoping you guys can help me out. I recently got an external usb disk containing a vm for a client, downloaded vmplayer, set it up with "Open a Virtual Machine", ran it, easy as pie. After working with it a bit this morning, I shut the VM down and now trying to start it back up again I get this: I tried removing the vm from my library, now it happens whenever I try to add it back in. In the meantime, I can still access other virtual machines so it seems like the problem might be with the virtual disk. So two questions: This is obviously not a very helpful error message. Where can I go to get more information? My Application EventLog doesn't contain anything from VMWare. What steps can I take to fix the problem? Edit: A couple more pieces of information. I did not take any snapshots. I don't think VM Player even has that ability. I have a zip file of (what I assume) is the state of the VM when it was sent to me. I cannot unzip it as it is huge and simply requires more HD space than I have available but I did extract the vmx file and examine it. Other than the UUIDs and the fact that mine reads cleanShutdown = "FALSE" they are identical. The log contains the following lines Jun 23 10:11:18.080: vmx| SNAPSHOT: SnapshotConfigInfoRead: Unable to load dict from 'E:....\MachineName.vmsd'. Jun 23 10:11:18.080: vmx| SNAPSHOT: SnapshotConfigInfoRead failed for file 'E:....\MachineName.vmx': Dictionary problem (6) Jun 23 10:11:18.082: vmx| SNAPSHOT: Snapshot_TimeStampTiers failed: Dictionary problem (6)

  Read the article

• Enable Php Fastcgi and Get 500 Internal Server Error (Lighttpd)

  - by skycrew

  anyone can help me? I just got this problem today. Before this my site running smooth with Fastcgi enable but now its show 500 internal server error with below logs. I need to disable php fastcgi in LxAdmin so that my visitor can access my site but when I disable php fastgi, my web performance is very slow with high load to server. I also include the performance screenshot. What should I do? This are the error log I got: 2010-06-16 21:59:52: (mod_cgi.c.584) cgi died, pid: 24055 2010-06-16 21:59:52: (mod_cgi.c.584) cgi died, pid: 21622 2010-06-16 21:59:52: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 3342 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 2010-06-16 21:59:52: (mod_fastcgi.c.3207) child exited, pid: 3342 status: 0 2010-06-16 21:59:52: (mod_fastcgi.c.3254) response not received, request sent: 836 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 for /index.php , closing connection 2010-06-16 21:59:52: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 24447 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 2010-06-16 21:59:52: (mod_fastcgi.c.3254) response not received, request sent: 860 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 for /index.php , closing connection 2010-06-16 21:59:52: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 24447 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 2010-06-16 21:59:52: (mod_fastcgi.c.3254) response not received, request sent: 836 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 for /index.php , closing connection 2010-06-16 21:59:52: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 24447 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 2010-06-16 21:59:52: (mod_fastcgi.c.3254) response not received, request sent: 878 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 for /index.php , closing connection 2010-06-16 21:59:52: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 24447 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 2010-06-16 21:59:52: (mod_fastcgi.c.3254) response not received, request sent: 878 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 for /index.php , closing connection 2010-06-16 21:59:52: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 24447 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 2010-06-16 21:59:52: (mod_fastcgi.c.3254) response not received, request sent: 878 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 for /index.php , closing connection 2010-06-16 21:59:52: (mod_cgi.c.584) cgi died, pid: 22325 2010-06-16 21:59:52: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 24447 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 2010-06-16 21:59:52: (mod_fastcgi.c.3254) response not received, request sent: 852 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 for /index.php , closing connection 2010-06-16 21:59:52: (mod_cgi.c.584) cgi died, pid: 24032 2010-06-16 21:59:52: (mod_cgi.c.584) cgi died, pid: 20402 2010-06-16 21:59:52: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 3336 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-0 2010-06-16 21:59:52: (mod_fastcgi.c.3207) child exited, pid: 3336 status: 0 2010-06-16 21:59:52: (mod_fastcgi.c.3254) response not received, request sent: 855 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-0 for /index.php , closing connection 2010-06-16 21:59:52: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 24448 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-0 2010-06-16 21:59:52: (mod_fastcgi.c.3254) response not received, request sent: 860 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-0 for /index.php , closing connection 2010-06-16 21:59:52: (mod_cgi.c.1231) cgi died ? 2010-06-16 21:59:53: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 24448 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-0 2010-06-16 21:59:53: (mod_fastcgi.c.3254) response not received, request sent: 860 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-0 for /index.php , closing connection 2010-06-16 21:59:53: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 24448 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-0 2010-06-16 21:59:53: (mod_fastcgi.c.3254) response not received, request sent: 878 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-0 for /index.php , closing connection 2010-06-16 21:59:53: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 24448 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-0 2010-06-16 21:59:53: (mod_fastcgi.c.3254) response not received, request sent: 860 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-0 for /index.php , closing connection 2010-06-16 21:59:53: (mod_fastcgi.c.1731) connect failed: Connection refused on unix:/var/tmp/lighttpd/php.socket.lyrics-hub.com.3333-1 2010-06-16 21:59:53: (mod_fastcgi.c.2885) backend died; we'll disable it for 5 seconds and send the request to another backend instead: reconnects: 0 load: 1 2010-06-16 21:59:56: (server.c.1470) server stopped by UID = 0 PID = 24439 2010-06-16 22:00:23: (log.c.75) server started Performance Graph as below:- http://img404.imageshack.us/img404/3498/memorylxadmin.jpg

  Read the article

• blu-ray archiving in vmware ESXi 4

  - by spacecadet77

  Hi, I need some advice about using blu-ray writer for archiving data on vmware ESXi 4. At office we have IBM System x3400 Tower server with ESXi 4 hipervisor and OpenSuse and CentOS GNU/Linux system as guests. Will blu-ray writer work in this setup, and if it will is there any particular model you can suggest. Best regards IBM System x3400 Tower server specification: 1x Intel Quad-Core Xeon E5410 2.33GHz/ 12MB/ 1333MHz (2x CPU max) Intel 5000P chipset, 2x 1GB PC2-5300 DDR2 667MHz SDRAM ECC Chipkill (32GB max) 2x4GB (2x2GB) PC2-5300 CL5 ECC DDR2 FBDIMM (x3400, x3550, x3650) SAS/SATA Hot-Swap Open Bay (0xHDD std, 4xHDD max, 8xHDD optional) ServeRAID 8K dual channel SAS/SATA controller (RAID 0,1,1E,10,5,6, 256MB, Battery Backup) Graphics ATI® RN50(ES1000) 16MB DDR, CD-RW/DVD Combo no FDD GigaEthernet, Tower with Power Supply 835W (opt Redudant) Slot 1: half-length, PCI-Express x8(x4 electrical) Slot 2: full, PCI-Express x8 Slot 3: full, PCI-Express x8 Slot 4: full, 64-bit 133MHz 3.3v PCI-X Slot 5: full, 64-bit 133MHz 3.3v PCI-X , Slot 6: half-length, 32-bit 33MHz 5.0v PCI ports: 4x USB (Vers 2.0), 2x PS/2, parallel, 2x serial (9-pin), VGA, RJ-45 (ethernet ), RJ-45 (sys mgm) HDD 4 x TB 7200rpm / Serial ATA II 3.0Gb/s / 16MB, RoHS

  Read the article

• Enable Php Fastcgi and Get 500 Internal Server Error (Lighttpd)

  - by skycrew

  Hello everyone, anyone can help me? I just got this problem today. Before this my site running smooth with Fastcgi enable but now its show 500 internal server error with below logs. I need to disable php fastcgi in LxAdmin so that my visitor can access my site but when I disable php fastgi, my web performance is very slow with high load to server. I also include the performance screenshot. What should I do? This are the error log I got: 2010-06-16 21:59:52: (mod_cgi.c.584) cgi died, pid: 24055 2010-06-16 21:59:52: (mod_cgi.c.584) cgi died, pid: 21622 2010-06-16 21:59:52: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 3342 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 2010-06-16 21:59:52: (mod_fastcgi.c.3207) child exited, pid: 3342 status: 0 2010-06-16 21:59:52: (mod_fastcgi.c.3254) response not received, request sent: 836 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 for /index.php , closing connection 2010-06-16 21:59:52: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 24447 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 2010-06-16 21:59:52: (mod_fastcgi.c.3254) response not received, request sent: 860 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 for /index.php , closing connection 2010-06-16 21:59:52: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 24447 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 2010-06-16 21:59:52: (mod_fastcgi.c.3254) response not received, request sent: 836 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 for /index.php , closing connection 2010-06-16 21:59:52: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 24447 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 2010-06-16 21:59:52: (mod_fastcgi.c.3254) response not received, request sent: 878 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 for /index.php , closing connection 2010-06-16 21:59:52: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 24447 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 2010-06-16 21:59:52: (mod_fastcgi.c.3254) response not received, request sent: 878 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 for /index.php , closing connection 2010-06-16 21:59:52: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 24447 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 2010-06-16 21:59:52: (mod_fastcgi.c.3254) response not received, request sent: 878 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 for /index.php , closing connection 2010-06-16 21:59:52: (mod_cgi.c.584) cgi died, pid: 22325 2010-06-16 21:59:52: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 24447 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 2010-06-16 21:59:52: (mod_fastcgi.c.3254) response not received, request sent: 852 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-1 for /index.php , closing connection 2010-06-16 21:59:52: (mod_cgi.c.584) cgi died, pid: 24032 2010-06-16 21:59:52: (mod_cgi.c.584) cgi died, pid: 20402 2010-06-16 21:59:52: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 3336 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-0 2010-06-16 21:59:52: (mod_fastcgi.c.3207) child exited, pid: 3336 status: 0 2010-06-16 21:59:52: (mod_fastcgi.c.3254) response not received, request sent: 855 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-0 for /index.php , closing connection 2010-06-16 21:59:52: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 24448 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-0 2010-06-16 21:59:52: (mod_fastcgi.c.3254) response not received, request sent: 860 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-0 for /index.php , closing connection 2010-06-16 21:59:52: (mod_cgi.c.1231) cgi died ? 2010-06-16 21:59:53: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 24448 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-0 2010-06-16 21:59:53: (mod_fastcgi.c.3254) response not received, request sent: 860 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-0 for /index.php , closing connection 2010-06-16 21:59:53: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 24448 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-0 2010-06-16 21:59:53: (mod_fastcgi.c.3254) response not received, request sent: 878 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-0 for /index.php , closing connection 2010-06-16 21:59:53: (mod_fastcgi.c.2462) unexpected end-of-file (perhaps the fastcgi process died): pid: 24448 socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-0 2010-06-16 21:59:53: (mod_fastcgi.c.3254) response not received, request sent: 860 on socket: unix:/var/tmp/lighttpd/php.socket.lyrics.skycrewz.net.3333-0 for /index.php , closing connection 2010-06-16 21:59:53: (mod_fastcgi.c.1731) connect failed: Connection refused on unix:/var/tmp/lighttpd/php.socket.lyrics-hub.com.3333-1 2010-06-16 21:59:53: (mod_fastcgi.c.2885) backend died; we'll disable it for 5 seconds and send the request to another backend instead: reconnects: 0 load: 1 2010-06-16 21:59:56: (server.c.1470) server stopped by UID = 0 PID = 24439 2010-06-16 22:00:23: (log.c.75) server started Performance Graph as below:- http://img404.imageshack.us/img404/3498/memorylxadmin.jpg

  Read the article

• What exactly is a Mobile mouse? + Mouse Recommendation

  - by chobo2

  I am really disappointed with Logitech. My first cordless wireless mouse was from them and it lasted like 5 years. So I decided to get another one from them http://www.futureshop.ca/catalog/proddetail.asp?logon=&langid=EN&sku_id=0665000FS10099373&catid= And this mouse sucks bad. After 6 months it broke. I returned it under warranty and got a new one now 4-6 month later it is on the verge of breaking again.... You pay like $50 for this mouse and it lasts like 6 months that sad. I just lost faith in Logitech mice as I remember my bro also had a logitech mouse too and it broke after like 6 months. He then bought another logitech mouse(different model) that has been working for maybe 2 years(and no signs of breaking) but I am not crazy about the mouse(I don't like the 2 buttons by the wheel) and I not sure if they even sell it(maybe they got rid of it because it lasts too long). http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=1578495&CatId=1285 So I am looking at a Microsoft mouse. http://www.futureshop.ca/catalog/proddetail.asp?logon=&langid=EN&sku_id=0665000FS10125565&catid= I am looking at this one but I am not sure what they mean by mobile mouse. I think that is what MS calls notebook mice. So I am not sure if this would be a good mouse to get for a desktop. I see it uses like a micro usb receiver but I am not sure if it is smaller then a standard mouse. But almost all the mice I looked at at futureshop.ca or staples are labeled notebook mice or mobile mice. So not sure what mice would be right for me. I don't want a corded one though. I really liked the LX6 design alot but it can't last more than 6 months. Thanks

  Read the article

• Windows 7 Sysprep Default User

  - by Demonwolf

  I seem to be having a problem with implementing my sysprep. I have been playing with Windows 7, WAIK, Server 2008 R2 and various other things. I managed to create a WIM with everything I need installed and I have worked out the autounattend.xml. I now have a Windows 7 64-bit complete unattended install from a USB device. It has all my programs, setting and everything done except one thing - the default profile set up 100% correctly. I have created a mostly set up default profile. I booted into audit mode, customized the Administrator account (mostly anyway) and then used sysprep with an unattend.xml file containing the copyprofile=true command. The file was set up with the WSIM and does not contain any extra info. This all works wonderfully. I recreated the WIM and all was good. I then decided to move the default location of the visible stuff in the user profile (Documents, Music, Pictures etc.) without changing the location of Appdata or other hidden folders. This is where things went a little... wrong. I went to the user folder (generally has the User name) with all the other folders in it. I right clicked on My Documents, found the location tab and changed it to M:\Documents. Now if I run sysprep /generalize /oobe /reboot /unattend:unattend.xml it starts the generalise... then spits out a fatal error and goes no further. The setuperr.log contains the following errors: 2011-08-18 23:21:43, Error [0x0f0043] SYSPRP WinMain:The sysprep dialog box returned FALSE 2011-08-18 23:31:57, Error [0x0f0082] SYSPRP LaunchDll:Failure occurred while executing 'C:\Windows\System32\slc.dll,SLReArmWindows', returned error code -1073425657 2011-08-18 23:31:57, Error [0x0f0070] SYSPRP RunExternalDlls:An error occurred while running registry sysprep DLLs, halting sysprep execution. dwRet = -1073425657 2011-08-18 23:31:57, Error [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep generalize internal providers; hr = 0xc004d307 Does anyone have any ideas how I can redirect My Documents and other items in a user file to a second drive in the default profile so it affects each person logging in?

  Read the article

• Audio Static/Interference regardless of audio interface?

  - by Tom

  I currently am running a media center/server on a Lubuntu machine. The machine specs: Core 2 Duo Extreme EVGA SLI 680i MotherBoard 2 GB DDR2 Ram 3 Hard Drives no raid - WD Caviar Black, Green, and Samsung Spinpoint Galaxy GTX 220 1GB External USB Creative XI-FI Extreme Card 550W Power Supply This machine is hooked up through an optical cable to an ONKYO HTR340 Receiver through the XIFI card. Whenever I play any audio regardless if it is through XBMC, the default audio player, a flash video, etc, I get a horrible static sound that randomly gets louder. Here is a video of the sound: http://www.youtube.com/watch?v=SqKQkxYRVA4 This static comes in randomly, sometimes going away for short periods, but eventually always comes back. So far I have tried everything I could think of: Reinstalling OS Installing/upgrading/repairing PulseAudio/Alsa Installing alternate OSes, straight Ubuntu, Lubuntu, Xubuntu, Arch, Mint, Windows 7 Switching audio from the external card to internal Optical, audio out through HDMI, audio out through headphones Different ports on receiver (my main desktop sounds fine on the same sound system) Different optical cables Unplugging everything unnecessary from the motherboard (1 HD, 1 Stick of Ram, 1 Keyboard) Swapping out ram Swapping out the motherboard Replacing the Graphics Card (was replaced due to fan being noisy, not specifically for this problem) Different harddrives Swapping power supply Disabling onboard audio Pretty much everything short of swapping the CPU. I haven't been able to narrow down the problem and it is getting frustrating. Is it possible that the CPU is faulty and might cause a problem such as this, or that the PC case is shorting out the motherboard? Any kind of suggestions will be appreciated.

  Read the article

• Toshiba Portege M400 screen rotation not working under Windows 7 x64

  - by Christi

  I have installed Windows 7 on my Toshiba Portege M400. This in itself was relatively tricky.* However, the button utilities aren't quite working for me. One of the buttons tries to launch the Toshiba Assist program, which doesn't appear to be available under Windows 7 for the M400, but this I can live without. More important is that the screen won't rotate as it is supposed to when you hold the "cancel" (X in a circle) button on the bezel. The PC is set to run "C:\Program Files (x860\Toshiba\Toshiba Rotation Utility\phtrot.exe". There is a "trot.exe" file in the same directory (the former appears to be to cause slightly different behaviour when rotation is done by press and hold). Neither of these programs rotates the screen either by using the buttons or from the command line. The screen is rotating normally when switching from tablet to laptop mode, so there does not appear to be an inherent problem with rotation. I'd just like to be able to use the buttons on the side of the screen to change the screen orientation. Windows XP used to have a "setrot" utility to do this, but that seems to have gone in Windows 7 Thanks for your help. *Just in case anyone comes looking for how to do this, you need to extract driver files from http://cdgenp01.csd.toshiba.com/content/support/downloads/util_raid_os2007252a.exe, which does not seem to be listed among the available files for the m400. This executable contains the SATA interface drivers that will need to be loaded by the installer before it can see your hard disk drive. It needs to be unpacked and the files copied to a USB key which they can then be loaded from in the install process. The utilities etc. for installation post windows install are all available from the Toshiba USA support website.

  Read the article

• Configuration management in support of scientific computing

  - by Sharpie

  For the past few years I have been involved with developing and maintaining a system for forecasting near-shore waves. Our team has just received a significant grant for further development and as a result we are taking the opportunity to refactor many components of the old system. We will also be receiving a new server to run the model and so I am taking this opportunity to consider how we set up the system. Basically, the steps that need to happen are: Some standard packages and libraries such as compilers and databases need to be downloaded and installed. Some custom scientific models need to be downloaded and compiled from source as they are not commonly provided as packages. New users need to be created to manage the databases and run the models. A suite of scripts that manage model-database interaction needs to be checked out from source code control and installed. Crontabs need to be set up to run the scripts at regular intervals in order to generate forecasts. I have been pondering applying tools such as Puppet, Capistrano or Fabric to automate the above steps. It seems perfectly possible to implement most of the above functionality except there are a couple usage cases that I am wondering about: During my preliminary research, I have found few examples and little discussion on how to use these systems to abstract and automate the process of building custom components from source. We may have to deploy on machines that are isolated from the Internet- i.e. all configuration and set up files will have to come in on a USB key that can be inserted into a terminal that can connect to the server that will run the models. I see this as an opportunity to learn a new tool that will help me automate my workflow, but I am unsure which tool I should start with. If any member of the community could suggest a tool that would support the above workflow and the issues specific to scientific computing, I would be very grateful. Our production server will be running Linux, but support for OS X would be a bonus as it would allow the development team to setup test installations outside of VirtualBox.

  Read the article

• Configuration management in support of scientific computing

  - by Sharpie

  For the past few years I have been involved with developing and maintaining a system for forecasting near-shore waves. Our team has just received a significant grant for further development and as a result we are taking the opportunity to refactor many components of the old system. We will also be receiving a new server to run the model and so I am taking this opportunity to consider how we set up the system. Basically, the steps that need to happen are: Some standard packages and libraries such as compilers and databases need to be downloaded and installed. Some custom scientific models need to be downloaded and compiled from source as they are not commonly provided as packages. New users need to be created to manage the databases and run the models. A suite of scripts that manage model-database interaction needs to be checked out from source code control and installed. Crontabs need to be set up to run the scripts at regular intervals in order to generate forecasts. I have been pondering applying tools such as Puppet, Capistrano or Fabric to automate the above steps. It seems perfectly possible to implement most of the above functionality except there are a couple usage cases that I am wondering about: During my preliminary research, I have found few examples and little discussion on how to use these systems to abstract and automate the process of building custom components from source. We may have to deploy on machines that are isolated from the Internet- i.e. all configuration and set up files will have to come in on a USB key that can be inserted into a terminal that can connect to the server that will run the models. I see this as an opportunity to learn a new tool that will help me automate my workflow, but I am unsure which tool I should start with. If any member of the community could suggest a tool that would support the above workflow and the issues specific to scientific computing, I would be very grateful. Our production server will be running Linux, but support for OS X would be a bonus as it would allow the development team to setup test installations outside of VirtualBox.

  Read the article

• Invoking 'Hotkey Mode' in IO Gear's GCS632U KVM Switch

  - by Tim Visher

  Awhile ago I changed the switch port key to left control on my IO Gear USB Switch and I'd like to change it back to Scroll Lock. When I did this, I have some memory of believing that I had found an error in the documentation for the switch regarding how to enter Hotkey Mode. Per the instructions in the manual(PDF), I'm supposed to be able to enter Hotkey Mode by Holding Scroll Lock for 2 seconds, adding Minus on the keypad for one second, and then release Minus first and within a second release Scroll lock. Ignoring the strangeness and fragility of this process, I'm looking for confirmation that this indeed works for anyone else. I can't remember why I thought it was wrong but I clearly remember that I did (I even had a blog post that I was going to write about but it got lost in the sands of time). As an aside, I'd be interested in seeing if there is any way to force a reset for the switch without entering Hotkey Mode as that would do exactly what I'm trying to do and I wouldn't have to mess with Hotkey Mode. Thanks in advance!

  Read the article

• Drive XML returning Windows Volume Shadow Service Error

  - by Ssvarc

  I'm trying to image a SATA laptop hard drive, using DriveImageXML, that is attached to my computer via a USB adapter. I'm running Win7 Ultimate 64 bit. DriveXML is returning: Could not initialize Windows Volume Shadow Service (VSS). ERROR C:\Program Files (x86)\Runtime Software\Drivelmage XML\vss64.exe failed to start. ERROR TIMEOUT Make sure VSSVC.EXE is running in your task manager. Click Help for more information. VSSVC.EXE is running in Task Manager, as is VSS64.exe. Looking at the FAQ on the Runtime webpage this turned up: Please verify in Settings-Control Panel-Administrative Tools-Services that the following services are enabled: MS Software Shadow Copy Provider Volume Shadow Copy Also make sure you are able to stop and start these services. Possible reasons for VSS failures: For VSS to work, at least one volume in your computer must be NTFS. If you use only FAT drives, VSS will not function. The required NTFS volume does not need to be identical with the volume you want to image. You should make sure that VSSVC.EXE is running in your task manager. If the problems persist, registering "oleaut.dll" and "oleaut32.dll" using "regsvr32" might help. Both of those services are running and can be started and stopped without issue. Using "regsvr32" to register ""oleaut32.dll" returns successful, but "oleaut.dll" returns: The module "oleaut.dll" failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found. Some other information that might be relevant. Browsing to the drive is successful, but accessing certain folders returns an "access" error. Windows runs a permissions adder that adds the current user profile to the NFTS permissions. Could this be the cause of the issue? DriveImage XML is running as Administrator. Thoughts?

  Read the article

• Install Ubuntu on a new netbook?

  - by torbengb

  I'm planning to buy a netbook, and I am considering to install Ubuntu on it. It would mainly be used by my wife at home for web browsing and email at home (lightweight is important, hence a netbook!), and we'd occasionally bring it along on travels (mostly as digital photo dropzone). I want to use Ubuntu instead of Windows because I'm sick of all the Windows hassle and updates. I'm not concerned about Windows applications; I'd switch to native alternatives as far as possible because really only Firefox and something like Picasa are needed. I'm considering an ASUS Eee PC 1001P or an MSI Wind U100 or an Point of View Mobii II (click the links for specs; nevermind that the rest is German). I'm not in the USA. Whatever I buy will most likely have Windows 7 on it but no optical drive. I would also buy a large-ish USB stick but not an external optical drive. Should I (and can I) install Ubuntu alongside Windows 7, or remove Windows? If I remove Windows first, how would I be able to reinstall it if I change my mind? Can I make a backup? Is a recovery CD usually provided? Should I choose the regular Ubuntu, or the Ubuntu Netbook Remix (UNR)? Does UNR allow me to install additional applications just as easily? Note: I'm asking about Ubuntu vs. Windows; let's skip the hardware discussion for now. Edit: I'm assuming that Windows is already installed; if it isn't then I would only install Ubuntu and this question is irrelevant.

  Read the article

• How to get decent WiFi despite a virtual Faraday cage

  - by MT_Head

  One of my clients is the local branch of an international airline. They have a small office in the secured area behind the ticket counters, and timeshare space at the ticket counter. I need to add a ticket printer out front, which I cannot (for contract/liability reasons) attach to the shared computer at the counter; the only workable solution seems to be to put the printer and its attached computer on a cart and connect to the office's network via WiFi. So far, no problem - right? Well, the terminal has been getting a facelift, which - among other things - includes decorative stainless-steel panels along the wall behind the ticket counters. This paneling acts as a seriously effective barrier to WiFi! The office's WiFi router - a brand-new D-Link DIR-815, dual-band 802.11n - is just on the other side of the pictured wall, and twenty feet or so to the right. And yet the only way I can connect AT ALL on this side of the wall is to stick the USB adapter (on the end of an extension cable) right into the crack between panels... and even then I can only see the 5GHz network, and that very weakly. Has anyone else had experience with this sort of misguided interior decoration? Any ideas on how I can improve reception on the other side of the barrier? (Needless to say, physical modifications of the environment - tempting though they might be - are strictly no-go.)

  Read the article

• Windows 8 unable to connect to WPA2 AES Wireless Network

  - by user170193

  I'm running Windows 8 and am unable to connect to my home wireless network. I've tried restarting the router, patching the drivers to the next version, patching the drivers to the last version, running windows update and patching the chipset drivers to the latest version. So far nothing has worked. My computer can get on the internet via USB tethering on my phone or an open WiFi connection, but it is unable to connect to my home WPA2 AES secured wireless network. It sees the network, attempts to connect, gets a limited connection and then drops the connection. All the other wireless devices in my household have no problems. I have the new Dell XPS 12, running Windows 8 using an Intel Centrino Advanced-N 6235 wireless adapter. I've refreshed windows twice now to try different driver configurations. I've tried uninstalling all the Dell software, I've tried uninstalling all the Intel software and reinstalling just the drivers. I've tried turning switching the ability for the Wireless driver to turn the computer off or on. I've tried setting up the connection manually from desktop mode. I've tried switching it on and off using the wireless button on the keyboard and in the software. So far nothing has allowed me to connect to the secured network. It just keeps getting a limited connection, dropping the connection and retrying. It's driving me crazy, any ideas, anything I missed? Thanks.

  Read the article

• External Hard Drive Won't Mount - MAC OSX

  - by dtj

  I have a Western Digital hard drive that's about 4 or 5 years old. It's 500 GB, USB. I use it to backup my Mac every so often. I had it partitioned: 1 side for full backups, and the other side for general storage of music, installers, etc. I decided to get rid of the partition today and dump all the data. So I opened disk utility, and hit 'erase'. It started thinking and then disk utility crashed. After the crash, the hard drive won't mount, however disk utility still sees the drive, but not the individual volume within. I tried booting up Disk Warrior and no luck there either. It has the drive as an "unknown drive". When I hit rebuild, it goes through all it steps and then stops cause of this error: The drive "unknown" is severely damaged and DiskWarrior is unable to determine its case sensitivity What can I do at this point? There isn't any physical damage to the drive. Never been dropped or anything.

  Read the article

• unreadable corrupted ntfs partition - lost clusters reported

  - by Eduardo Martinez

  partition magic is reporting multiple 'bad file record signature' and 'lost clusters' errors on my 250GB samsung sata disk (connected via usb on a xp sp3). Unfortunately PM is unable to fix. PM shows the drive as being NTFS, detects used space ok and also drive name. But PM browser (right click on partition, browse...) won't show anything (as if disk was empty) Windows Explorer is not even picking the drive name and reports 'the file or directory is corrupted and unreadable' PTDD partition table doctor demo tells me the boot sector is fine, and I can see all disk content on its browser - but crucially cannot copy that content over to a new disk (PTDD browser is pretty arid to say the least) Also tried - photorec-6.11.3 - it actually started to extract files but wouldn't keep file names or any folder structure (maybe I missed sth on the configuration options) - find and mount - intellectual scan went well, the only partition on the disk was detected, then tried to mount into p: but got this error on windows explorer: 'p:\ is not accesible. The media is write protected'. Find and mount allows you to create an image from partition but I don't have a disk big enough at hand. Does anyone know if this will keep the extracted files/folders structure intact? I'm starting to think the disk is pretty screwed and my chances to recover this data are slim. Please someone enlighten me with that marvellous piece of software I am missing :-) Thanks in advance

  Read the article

• Windows 7 AIK help

  - by microchasm

  I've just got in a few Windows 7 (64, Windows 7 Professional) machines, and I'm trying to get the AIK 2010 working. I've set up one of the machines, and installed AIK and MDT on it. I've followed the directions at http://technet.microsoft.com/en-us/library/dd349348%28WS.10%29.aspx about 3 times now, and also tried the built-in .chm help files that came with AIK. In AIK I grab the install.wim image off the OEM cd, at which point it asks me which version (I select Professional). I follow the rest of the instructions creating a new Autounattend answer file, and fill in the various bits and pieces according the the step-by-step guides. I verify the Answer file (No warnings or errors), save it, and copy it onto a USB drive. I go to another machine, insert it's OEM Win7 Disk, and power on. I've set BIOS to boot from CD, so it goes directly into the installation. Once The files are loaded, and Setup starts, it immediately asks which version to install (Home basic, Home Premium, Professiona, Ultimate). Ugh, I thought it was supposed to be an automated install, and that selecting the Version when opening the .wim file would answer this question. I looked for an option to set which version to be installed on the net, in the help, and in AIK itself; to no avail. Anyway, just for laughs I select Professional,and hit continue. It copies files for about 10 seconds, then fails with the following error: "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information. [OK]". Clicking OK reboots the box, and obviously there are no log files because the OS isn't installed. It is a Dell Optiplex 380 , Intel Core Duo 2.93 GHzl 4 GB RAM, 64 Bit. Any help would be REALLY appreciated.

  Read the article

• Preseeding Ubuntu partman recipe using LVM and RAID

  - by Swav

  I'm trying to preseed Ubuntu 12.04 server installation and created a recipe that would create RAID 1 on 2 drives and then partition that using LVM. Unfortunately partman complains when creating LVM volumes saying there no partitions in recipe that could be used with LVM (in console it complains about unusable recipe). The layout I'm after is RAID 1 on sdb and sdc (installing from USB stick so it takes sda) and then use LVM to create boot, root and swap. The odd thing is that if I change the mount point of boot_lv to home the recipe works fine (apart from mounting in wrong place), but when mounting at /boot it fails I know I could use separate /boot primary partition, but can anybody tell me why it fails. Recipe and relevant options below. ## Partitioning using RAID d-i partman-auto/disk string /dev/sdb /dev/sdc d-i partman-auto/method string raid d-i partman-lvm/device_remove_lvm boolean true d-i partman-md/device_remove_md boolean true #d-i partman-lvm/confirm boolean true d-i partman-auto-lvm/new_vg_name string main_vg d-i partman-auto/expert_recipe string \ multiraid :: \ 100 512 -1 raid \ $lvmignore{ } \ $primary{ } \ method{ raid } \ . \ 256 512 256 ext3 \ $defaultignore{ } \ $lvmok{ } \ method{ format } \ format{ } \ use_filesystem{ } \ filesystem{ ext3 } \ mountpoint{ /boot } \ lv_name{ boot_lv } \ . \ 2000 5000 -1 ext4 \ $defaultignore{ } \ $lvmok{ } \ method{ format } \ format{ } \ use_filesystem{ } \ filesystem{ ext4 } \ mountpoint{ / } \ lv_name{ root_lv } \ . \ 64 512 300% linux-swap \ $defaultignore{ } \ $lvmok{ } \ method{ swap } \ format{ } \ lv_name{ swap_lv } \ . d-i partman-auto-raid/recipe string \ 1 2 0 lvm - \ /dev/sdb1#/dev/sdc1 \ . d-i mdadm/boot_degraded boolean true #d-i partman-md/confirm boolean true #d-i partman-partitioning/confirm_write_new_label boolean true #d-i partman/choose_partition select Finish partitioning and write changes to disk #d-i partman/confirm boolean true #d-i partman-md/confirm_nooverwrite boolean true #d-i partman/confirm_nooverwrite boolean true EDIT: After a bit of googling I found below snippet of code from partman-auto-lvm, but I still don't understand why would they prevent that setup if it's possible to do manually and booting from boot partition on LVM is possible. # Make sure a boot partition isn't marked as lvmok if echo "$scheme" | grep lvmok | grep -q "[[:space:]]/boot[[:space:]]"; then bail_out unusable_recipe fi

  Read the article

• Can a wifi AP act as a client, and a server at the same time?

  - by nbolton

  I feel this is SF worthy (as opposed to SU) as I go into a bit of detail on gateways/routing. Here's my ideal setup (if possible) -- there is a wifi network (lets call it bob's) with which I want access to, but I have a few other computers on my network which I want to keep behind a firewall. So I was thinking of buying a wireless access point so that I could set it up to connect to bob's network from the AP, and then from my server, connect to the AP via ethernet. So that's the first bit. Second part is that I want to have my own private wifi network off the back of this; can I then tell the AP to serve a new network called foobar. When I say private network, I mean that my server is actually a Debian linux install with routing configured (and I also do some QoS stuff on, etc). So ideally, I'd like all the clients on the private network to be behind the server in terms of routing. However, if the private clients connect to the server via wifi, then aren't they exposed to the "public" network? That is, if someone is savvy enough to scan for my IP range. Also, to do routing I'd need to connect two ethernet cables between the server and the AP (because you can't do routing/QoS on virtual devices) -- which isn't a problem really; but I'm not sure whether the AP will allow me to separate the public and private LANs. Or, as well as the AP, am I better getting a wifi-to-ethernet adapter for the server? I could use a wifi usb, but this can be tricky to set up on headless linux; plus the signal strength is a bit lousy. If this question is a bit vague/spurious in places, please comment and I will explain in more detail.

  Read the article

• TomTom GO & Ubuntu Linux: impersonating a GPRS phone with dund

  - by Broam

  Background: I've called TomTom support, and they don't support Linux. I can get my GO 730 to mount Mass Storage, and I found a shell script that will allow me to install maps (haven't tried it; will update when I do.). As of note: USB 2.0 only. 1.1 ports will not work. However--I still can't update the TomTom or take advantage of any traffic services. The GO will connect to a mobile phone, but I don't have one that supports tethering. However, I've found a site that claims to know a way to get a Linux Machine to impersonate a phone advertising GPRS services and it apparently works in Fedora as old as FC4. I'm having some serious trouble getting this to work on Ubuntu 9.10 Karmic, mainly because I think some of the built-in bluetooth stuff is getting in the way. Changing the class bits in main.conf (hcid.conf does not exist) doesn't crash..., and dund starts and listens, but the TomTom device never seems to want to connect to my machine. I haven't played around much with sdcptool (I think that's the name, not in front of a Linux machine right now) but maybe I have to advertise the DUN profile...I'm not very sure. My Question: I have no way to diagnose the problems. What are some diagnostic tools I can use to help dig down and figure out what's going on? Update: apparently dund is a legacy tool that's going away. What replaces it?

  Read the article

• Ubuntu Hardy : Testing for environment variables in udev rules doesn't seem to work

  - by Fred

  I have a Ubuntu 8.04 LTS (server edition), and I need to write a udev rule for it to act upon plugging a USB thumb drive. However, I need a different action depending on the filesystem of the drive. I know I can use the ID_FS_TYPE environment variable to check for the filesystem on the drive. Following instructions found here, I try a dummy udev rule as such : KERNEL!="sd[a-z][0-9]", GOTO="my_udev_rule_end" ACTION=="add", RUN+="/usr/bin/touch /tmp/test_udev_%E{ID_FS_TYPE}" ACTION=="add", ENV{ID_FS_TYPE}=="vfat", RUN+="/usr/bin/touch /tmp/test_udev_it_works" LABEL="my_udev_rule_end" However, when I plug in a thumb drive with a vfat filesystem (which should trigger both rules), I end up with a file called /tmp/test_udev_vfat, meaning the first rule was triggered successfully, and that the ID_FS_TYPE environment variable is "vfat", but I don't have the other file, meaning that although I know the ID_FS_TYPE env variable is "vfat", I can't seem to check against it for a match. I tried googling the thing, but pretty much every result seems to assume ENV{ID_FS_TYPE}=="vfat" works. I also tested the exact same udev rule on Ubuntu 10.04 LTS server, and I have the same result. I'm probably missing something very simple, but I just don't get it. Does anyone see what is wrong with my udev rule that would prevent it from matching on ENV{ID_FS_TYPE}? Thanks.

  Read the article

• Install Linux Mint on PC without bootable CD

  - by crosenblum

  Unfortunately my PC's CD drive is not bootable; I have such a mixture of SATA and IDE drives, so until I have more money to redo my controller setup, I can't boot from any cd. Currently, I have a DVD burned with latest version of Linux Mint, and I have an USB drive with an old version of Mint. I have a partition ready to install Linx Mint into, but no idea how to install it, since I can only boot to my hard drive. I am totally unable to boot to CD, so that is definitely out. My main partition is WinXP Pro SP3. Is there software I can use to format my Linux partition, so that I can then just copy Mint over to that partition? Or is there a better way to install linux mint? I have to do it within Windows XP, since that's all that I can boot right now. I have considered Mint4Win, but that doesn't allow a full installation of Linux Mint. Any ideas?

  Read the article

< Previous Page | 231 232 233 234 235 236 237 238 239 240 241 242  | Next Page >