Search Results

Search found 19000 results on 760 pages for 'boot tool'.

Page 236/760 | < Previous Page | 232 233 234 235 236 237 238 239 240 241 242 243  | Next Page >

  • Stuck With grub rescue> console

    - by rej santos
    Here is the background of my issue: I just recently installed the latest version of Ubuntu along side with Windows 8 Enterprise. However upon checking the disk size, it seems that some of the portions of the hd memory were gone so I decided to check the disk partition and have seen that is was being used by another file system. Thinking that the Ubuntu takes it boots stuff from my drive C: , I deleted that partition and formated so I can use it to store some movies, music etc. Now, as I switch on my machine, I am stucked with: error: unknown filesystem grub rescue> I googled a lot and saw the following command which seems no to me like sudo, chainloader etc, all of these command only returns unknown command in the console. What I just wanted is to boot from my Windows 8 OS. Just to add, I can't open the BIOS menu so I could choose what media to boot. As I open my machine it automatically takes me to grub rescue console. Here are the thing I already have: Ubuntu Installation Disk Windows 8 System repair Disk I just don't know how to boot into these things. Let me know what to do.

    Read the article

  • Restoring GRUB2 on Software RAID 0 after Windows 7 wiped it using LiveCD

    - by unknownthreat
    I have installed Ubuntu 10.10 on my system. However, I need to install Windows 7 back, and I expect that it would alter GRUB and it did. Right now, my partition on my Software RAID 0 looks like this: nvidia_acajefec1 is Ubuntu 10.10 and nvidia_acajefec3 is Windows 7. I've been following some guides around and I am always stuck at GRUB not able to detect the usual RAID content. I've tried running: sudo grub > root (hd0,0) GRUB complains it couldn't find my hard disk. So I tried: find (hd0,0) And it complains that it couldn't find anything. So I tried: find /boot/grub/stage1 It said "file not found". Here's the text from the console: ubuntu@ubuntu:~$ grub Probing devices to guess BIOS drives. This may take a long time. [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename. ] grub> root (hd0,0) root (hd0,0) Error 21: Selected disk does not exist grub> find /boot/grub/stage1 find /boot/grub/stage1 Error 15: File not found Fortunately, I got one person suggesting that what I've been trying to do is for GRUB Legacy, not GRUB2. So I went to the suggested website, ** (http://grub.enbug.org/Grub2LiveCdInstallGuide) **try to look around, and try: ubuntu@ubuntu:~$ sudo fdisk -l Unable to seek on /dev/sda This is just the step 2 of the instruction in the http://grub.enbug.org/Grub2LiveCdInstallGuide and I cannot proceed because it cannot seek /dev/sda. However, ubuntu@ubuntu:~$ sudo dmraid -r /dev/sdb: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 /dev/sda: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 So what now? Do you have an idea for how to make fdisk see my RAID array on live cd (Ubuntu 10.10)? Honestly, I am lost, very lost in trying to restore GRUB2 on this software RAID 0 system right now.

    Read the article

  • Leveraging .Net 4.0 Framework Tools For Encrypting Web Configuration Sections

    - by Sam Abraham
    I would like to share a few points with regards to encrypting web configuration sections in .Net 4.0. This information is also applicable to .Net 3.5 and 2.0. Two methods can work perfectly for encrypting connection strings in a Web project configuration file:   1-Do It All Yourself! In this approach, helper functions for encrypting/decrypting configuration file content are implemented. Program would explicitly retrieve appropriate content from configuration file then decrypt it appropriately.  Disadvantages of this implementation would be the added overhead for maintaining the encryption/decryption code as well the burden of always ensuring sections are appropriately decrypted before use and encrypted appropriately whenever edited.   2- Leverage the .Net 4.0 Framework (The Way to go!) Fortunately, all needed tools for protecting configuration files are built-in to the .Net 2.0/3.5/4.0 versions with very little setup needed. To encrypt connection strings, one can use the ASP.Net IIS Registration Tool (Aspnet_regiis.exe). Note that a 64-bit version of the tool also exists under the Framework64 folder for 64-bit systems. The command we need to encrypt our web.config file connection strings is simply the following:   Aspnet_regiis –pe “connectionstrings” –app “/sampleApplication” –prov “RsaProtectedConfigurationProvider”   To later decrypt this configuration section:   Aspnet_regiis –pd “connectionstrings” –app “/SampleApplication”   The following is a brief description of the command line options used in the example above. Aspnet_regiis supports many more options which you can read about in the links provided for reference below.   Option Description -pe  Section name to encrypt -pd  Section name to decrypt -app  Web application name -prov  Encryption/Decryption provider   ASP.Net automatically decrypts the content of the Web.Config file at runtime so no programming changes are needed.   Another tool, aspnet_setreg.exe is to be used if certain configuration file sections pertinent to the .Net runtime are to be encrypted. For more information on when and how to use aspnet_setreg, please refer to the references below.   Hope this helps!   Some great references concerning the topic:   http://msdn.microsoft.com/en-us/library/ff650037.aspx http://msdn.microsoft.com/en-us/library/zhhddkxy.aspx http://msdn.microsoft.com/en-us/library/dtkwfdky.aspx http://msdn.microsoft.com/en-us/library/68ze1hb2.aspx

    Read the article

  • At the time of installing ubuntu, i am getting dark black screen only

    - by faruque
    I am trying to install Ubuntu 12.04 LTS dual boot with Windows 7, but when i click on Try or even Install ubuntu, i am getting black screen only. I can't see any text or anything else. When i see my Laptop's screen from close look, ubuntu in the middle of screen shown but screen is dark black. So because of this i am unable to install Ubuntu on my laptop. Please help in this regard. Following deatails of my laptop. Details of my Laptop: Manufacturer- Acer Aspire 4736 Processor- Intel core 2 duo CPU T660 Graphics driver- Mobile Intel(R) 4 series express chipset family (Microsoft corporation - WDDM 1.1), Current version installed- 8.15.10.2302 In ubuntu 11.04 i know how to boot into nomodeset, but i don't know how to boot through nomodeset in ubuntu 12.04 LTS. Because there is no option shown for F6 key. My laptop is Acer aspire 4736, and my Video/Graphics card shows unknown by ubuntu. Please someone help me. Can changing or upgrading my laptop's graphic card solve this problem..?? If yes then, which graphic card should i go for which is supported by Ubuntu and other Linux distros? Please someone help.

    Read the article

  • Ubuntu 12.10 ATI Driver 12.11 fails after compiz and xorg update

    - by Lukasz W.
    I updated my system via the package manager from Unity and next restart was just blackness. After being here: http://linux.hootip.com/amd-catalyst-12-11-beta-fix-and-installation-the-drivers-on-ubuntu-12-11/ I had the Catalyst 12.11 Beta driver installed. I checked my /var/log/apt/history.log and the update I received was of compiz and xorg packages. I tried to get latest release info, but all I get from their pages are commit info; I can't tell what was n the package update I got served. Anyone knows what was in the latest xorg/compiz release that broke the driver? Which driver should I use now? For completeness this is how I got the system back to boot (probably lame and not elegant): Boot with GRUB selection "More Ubuntu options (or sth like that), From secondary screen select 3.5.0-19 with boot options, When system prompts on stuff you'd like to do, select "root" - Drop to root shell, There: # mount -o remount,rw / # mv /etc/X11/xorg.conf /etc/X11/xorg.conf.failed # /usr/share/ati/fglrx-uninstall.sh # reboot This got be back on my feet.

    Read the article

  • Why doesn't my grub background show?

    - by luri
    I've tried to change resolution, colors and background image for my grub menu, but I get no background (well, just a black one, no image).... What am I doing wrong? This is my grub.cfg (omitting the OS's part): # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="${saved_entry}" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga } insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set 42509bf9-f3e6-460a-8947-ec0f5c1fbcc8 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=1280x1024x24 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set 42509bf9-f3e6-460a-8947-ec0f5c1fbcc8 set locale_dir=($root)/boot/grub/locale set lang=es insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set 42509bf9-f3e6-460a-8947-ec0f5c1fbcc8 insmod jpeg if background_image /boot/grub/Serenity_Enchanted_by_sirpecangum.jpg ; then set color_normal=black/white set color_highlight=brown/light-gray else set menu_color_normal=white/black set menu_color_highlight=black/light-gray fi ### END /etc/grub.d/05_debian_theme ### The selected image has been copied to /boot/grub/Serenity_Enchanted_by_sirpecangum.jpg with no luck. I'm for sure missing something (probably something obvious) but I don't really get it...

    Read the article

  • CodePlex Daily Summary for Monday, October 08, 2012

    CodePlex Daily Summary for Monday, October 08, 2012Popular ReleasesSofire Suite v1.6: XSqlModelGenerator.AddIn: 1、?? VS2010/2012 2、?? .NET FRAMEWORK 2.0 3、?? SOFIRE V1.6Sofire XSql: XSqlFormDemo: ???? MSSQL ???????ClosedXML - The easy way to OpenXML: ClosedXML 0.68.0: ClosedXML now resolves formulas! Yes it finally happened. If you call cell.Value and it has a formula the library will try to evaluate the formula and give you the result. For example: var wb = new XLWorkbook(); var ws = wb.AddWorksheet("Sheet1"); ws.Cell("A1").SetValue(1).CellBelow().SetValue(1); ws.Cell("B1").SetValue(1).CellBelow().SetValue(1); ws.Cell("C1").FormulaA1 = "\"The total value is: \" & SUM(A1:B2)"; var...Picturethrill: Version 2.10.7.0: Major FeaturesWindows 8 Support!!! Picturethrill is fully tested on latest Windows 8. Try it now.New AboutPicturethrill Dialog Available from "Advanced" window. Describes Version, Developers and other infoFull Installation Information in Control Panel Picturethrill in ControlPanel has full information, including Version and Size. Minor Bug FixesImproved Logging AppDomain Unhandled Exception Logging Delete WallpaperDownload Folder (Saves Diskspace) Advanced Settings "Close" button bug ...VidCoder: 1.4.3 Beta: Fixed crash on switching container types. Updated subtitle selection to only allow one PGS subtitle to be selected under an MP4 container as PGS passthrough in MP4 is not supported and the sub must be burned in.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.68: Fixes for issues: 17110 - added support for -moz-calc or -webkit-calc to previous fix for calc support. 18652 - if being run under Mono runtime, don't mistake UNIX-style paths for command-line switches. 18659 - added capability to specify JS settings for CSS files that have JS embedded in expressions. Did a lot of internal house-keeping: add DLL support for -pponly switch. Add support for -js:expr, -js:evt, and -js:json to allow easy parsing for expressions, event handlers, and JSON code...Json.NET: Json.NET 4.5 Release 10: New feature - Added Portable build to NuGet package New feature - Added GetValue and TryGetValue with StringComparison to JObject Change - Improved duplicate object reference id error message Fix - Fixed error when comparing empty JObjects Fix - Fixed SecAnnotate warnings Fix - Fixed error when comparing DateTime JValue with a DateTimeOffset JValue Fix - Fixed serializer sometimes not using DateParseHandling setting Fix - Fixed error in JsonWriter.WriteToken when writing a DateT...Readable Passphrase Generator: KeePass Plugin 0.7.2: Changes: Tested against KeePass 2.20.1 Tested under Ubuntu 12.10 (and KeePass 2.20) Added GenerateAsUtf8 method returning the encrypted passphrase as a UTF8 byte array.JSLint for Visual Studio 2010: 1.4.2: 1.4.2GPdotNET - artificial intelligence tool: GPdotNET v2 BETA3: This is hopefully the last beta before final version.RiP-Ripper & PG-Ripper: PG-Ripper 1.4.02: changes NEW: Added Support Big Naturals Only forum NEW: Added Setting to enable/disable "Show last download image"patterns & practices: Prism: Prism for .NET 4.5: This is a release does not include any functionality changes over Prism 4.1 Desktop. These assemblies target .NET 4.5. These assemblies also were compiled against updated dependencies: Unity 3.0 and Common Service Locator (Portable Class Library).WinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.2: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...Snoop, the WPF Spy Utility: Snoop 2.8.0: Snoop 2.8.0Announcing Snoop 2.8.0! It's been exactly six months since the last release, and this one has a bunch of goodies in it. In particular, there is now a PowerShell scripting tab, compliments of Bailey Ling. With this tab, the possibilities are limitless. It basically lets you automate/script the application that you are Snooping. Bailey has a couple blog posts (one and two) on his tab already, and I am sure more is to come. Please note that if you do not have PowerShell installed, y....NET Micro Framework: .NET MF 4.3 (Beta): This is the 4.3 Beta version of the .NET Micro Framework. Feature List for v4.3 Support for Visual Studio 2012 (including the Windows Desktop Express version) All v4.2 QFEs features and bug fixes (PWM enhancements, lwIP and network driver reliability improvements, Analog Output, WinUSB and latest GCC support) Improved diagnostic information for deployment Decreased boot time Bug fixes Work Item 1736 - Create link for MFDeploy under start menu Work Item 1504 - Customizing lwIP o...MCEBuddy 2.x: MCEBuddy 2.3.1: 2.3.1All new Remote Client Server architecture. Reccomended Download. The Remote Client Installation is OPTIONAL, you can extract the files from the zip archive into a local folder and run MCEBuddy.GUI directly. 2.2.15 was the last standalone release. Changelog for 2.3.1 (32bit and 64bit) 1. All remote MCEBuddy Client Server architecture (GUI runs remotely/independently from engine now) 2. Fixed bug in Audio Offset 3. Added support for remote MediaInfo (right click on file in queue to get ...D3 Loot Tracker: 1.5: Support for session upload to website. Support for theme change through general settings. Time played counter will now also display a count for days. Tome of secrets are no longer logged as items.Team Foundation Server Word Add-in: Version 1.0.12.0622: Welcome to the Visual Studio Team Foundation Server Word Add-in Supported Environments Microsoft Office Word 2007 and 2010 X86 (32-bit) Team Foundation Server 2010 Object Model TFS 2010, 2012 and TFS Service supported, using TFS OM / Explorer 2010. Quality-Bar Details Tool has been reviewed by Visual Studio ALM Rangers Tool has been through an independent technical and quality review All critical bugs have been resolved Known Issues / Bugs WI#43553 - The Acceptance criteria is not pu...DirectX Tool Kit: October 2012: October 2, 2012 Added ScreenGrab module Added CreateGeoSphere for drawing a geodesic sphere Put DDSTextureLoader and WICTextureLoader into the DirectX C++ namespace Renamed project files for better naming consistency Updated WICTextureLoader for Windows 8 96bpp floating-point formats Win32 desktop projects updated to use Windows Vista (0x0600) rather than Windows 7 (0x0601) APIs Tweaked SpriteBatch.cpp to workaround ARM NEON compiler codegen bugCRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1002.3): Visual Ribbon Editor 1.3.1002.3 What's New: Multi-language support for Labels/Tooltips for custom buttons and groups Support for base language other than English (1033) Connect dialog will not require organization name for ADFS / IFD connections Automatic creation of missing labels for all provisioned languages Minor connection issues fixed Notes: Before saving the ribbon to CRM server, editor will check Ribbon XML for any missing <Title> elements inside existing <LocLabel> elements...New Projectsamplifi: This project is still under construction. We will add more information here as soon as it is available.autoclubpigue: Proyecto para el auto club de piguecoiffeurprj: coiffeurprjerutufym: erutufym is gnol eht gge.Express AOP: A .NET AOP ToolsFile Slurpee: The purpouse of this application is to help security professionals during their penetration tests. Given a configuration this application will scour the target Guardian - Google Authenticator: Guardian is a windows client application for Google Authenticator - a software based two-factor authentication token developed by Google.ManagedCuda Galaxy Simulator: This project is a test of ManagedCuda and graphics interop to OpenTK to simulate a simple galaxy on the GPU.mostafanote: ????? ???? ??????? ?? ???? ?? ?? ?? ? ?? ??????? ?? ??????? ??? ?? ??? ?? ?? ???????? ??????? ??? ??? ?? ???? ?????? NXT Controller: A simple controller for the LEGO Mindstorms NXTPowerShell Security: PoshSec is short for PowerShell security, a module provided to allow PowerShell users testing, analysis and reporting on Window securityRevenant Raiders - Sunstrider: Tool to provide information about Revenant Raiders - Sunstrider.Run: animal runSharedDeploy: Simple ASP.MVC app , that use 2 types of view : mobile and desktop. In core WebApi, jQuery, jQuery.mobileSkyCoffee: Cafeteria ApplicationSOSA Analysis Module: Analysis program for data from SOSA psychological experiment software.SQL Connector: SQL Connector is a .DLL file that make it easy to comunicate with SQL Server Works in : Windows Desktop Applications ASP.Net Web (MVC - WEB Services) Windows cSQL Job Scripter: SQL Job Scripter is a command line utility that produces scripts of SQL Agent jobs. It will script either to a single file or to one file per job. SQL Server Watcher: A tool for collecting and monitoring information about sql server.Team Build Inspector: An add-in for Visual Studio Team Explorer that monitors the status of build definitions by its latest build, latest good build & underlying source code status.TED Talk Download Manager: "TED Talk Download Manager" provides a central point in which to download multiple TED talks, while keeping track of any talk previously downloaded.Temp project mycollection: My collection temporary projectUnreal Unit Converter: A Simple UDK <-> 3DS Max <-> Meters Unit Converter - with some other stuff.Watermelon Site: This Site is The site of Watermelon Inc. In This Site: Downloads News about Watermelon And more... WiX Extended Bootstrapper Application: An extended WiX bootstrapper Application based on the WiX standard bootstrapper application.Wrox NHibernate with ASP.NET Problem-Design-Solution -C# version: sample code of Wrox NHibernate with ASP.NET Problem-Design-Solution (http://nhibernateasp.codeplex.com/) in C# which is done as a practice

    Read the article

  • Raid Shows Up as Multiple Drives - Can't Mount

    - by manyxcxi
    I have a single hard drive that the OS is installed on and I have Sil raid card installed with two matching 500GB hdds set up in Raid 0 and formatted- they're completely empty. For whatever reason they are showing up as /dev/sdb and /dev/sdc and not as a single hard drive. I used fdisk to format both raid drives as Linux raid auto (fd) but I cannot mount either device and dmraid doesn't seem to want to work, what step am I missing? When I installed 9.04 oh so long ago it seems like it recognized and automatically did everything that needed to be done, now I'm stuck. dmraid Output root@tripoli:~# dmraid -r /dev/sdc: sil, "sil_biaebhadcfcb", stripe, ok, 976771072 sectors, data@ 0 /dev/sdb: sil, "sil_biaebhadcfcb", stripe, ok, 976771072 sectors, data@ 0 root@tripoli:~# dmraid -ay RAID set "sil_biaebhadcfcb" already active fdisk Output root@tripoli:~# fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000b9b01 Device Boot Start End Blocks Id System /dev/sda1 * 1 32 248832 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 32 60802 488134657 5 Extended /dev/sda5 32 60802 488134656 8e Linux LVM Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6ead5c9a Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 fd Linux raid autodetect Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe6e2af28 Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 fd Linux raid autodetect

    Read the article

  • Coda-like experience for Ubuntu

    - by Dillon Gilmore
    I'm a web developer who's going to transition from using Mac OS X to Ubuntu. I've been using Coda for some time, only because it makes web development easy. I know a full fledged app isn't available for Linux, but would like to know about apps that specialize in the same tasks that Coda offers. I plan on switching to Vim for code editing, I'm extremely proficient and will install the Janus plugin and be good to go for editing code. One thing that makes editing on Coda so amazing is its extremely good at SFTP, you can drag and drop files and/or folders from your local drive to the server. Also, you can edit code directly on the server. The problem here, is that using Vim I don't know of a way to edit code on a remote server, while using my own Vim settings and plugins. To solve this, I would like to know of a good SFTP client OR a good SFTP CLI. A CLI that could synchronize your files after a file has been modified would be perfect, but not necessary. Now, one of the biggest and best features of Coda is its ability to view your databases. You get to create a database, create tables, add stuff, delete stuff and view the contents of the table (all this without writing a single SQL statement). I will admit that databases are my weak point, but is a very important part of my job. If there is a tool that specializes in databases would be perfect. I wouldn't prefer to use the command line for database stuff, but if there is a CLI for databases that I'm missing could potentially be useful. So I guess I'm asking for two things. A tool that makes databases easier to visualize and a tool that assists in pushing my local code to a server.

    Read the article

  • Sharing an internet connection through the Ethernet port

    - by Bob Cunningham
    I have a small living room PC (Bohica, running fully-updated Ubuntu 10.10/Maverick) connected to my HDTV that I use for web browsing and media streaming. It connects via WiFi (wlan0) to my Fedora server (Snafu) that in turn connects to the internet. I use static addressing, and everything has been working fine. I just got a Blu-ray player, and I'd like to give it wired network access to the internet via Bohica's available wired ethernet port (eth0). So far, I haven't been to get eth0 and the network configured to get the Blu-ray player talking to the internet. Here's my wlan0 configuration: ip4 addr: 192.168.0.100 mask: /24 (255.255.255.0) gateway: 192.168.0.4 (fedora box) The Blu-ray player is set to an IP of 192.168.0.98/24, with the same gateway as above. I want eth0 set to an IP of 192.168.0.99/24, but when I do this using nm-connection-editor I lose internet access (the system tries to use eth0 as the default internet access interface). How do I get my blu-ray player to talk to the internet through Bohica, and do so without disrupting my current (working) network? Thanks. Edit: Here's the relevant output from nm-tool with the Blu-ray player connected: $ nm-tool NetworkManager Tool State: connected - Device: eth0 Type: Wired Driver: forcedeth State: disconnected Default: no HW Address: 90:FB:A6:2C:94:32 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on - Device: wlan0 [wlan0] Type: 802.11 WiFi Driver: ndiswrapper State: connected Default: yes HW Address: 00:26:5A:C0:D0:05 IPv4 Settings: Address: 192.168.0.100 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.4

    Read the article

  • How is the Ubuntu installation supposed to work?

    - by Bob D
    I have given up on installing Ubuntu 12.04.01 for the sixth time. I finally got Windows XP to work again. So I blitzted the Ubuntu partition and the swap partition and was about to install the sixth try when it occurred to me that ought to ask how is is "supposed" to go. My installer will install Ubuntu on the Linus ext4 partition I created by hand in Windows on my C drive. But the installer keeps insisting on installing the OS on my D drive unless I intervene. So if I choose "do something else" it will accept installing Ubuntu on the C drive in the partition I previously created, but it insists on putting the "Device for boot loader installation" on the D drive. I can select a different drive at this point (where I could not with the "along side windows choice) but what drive to I choose??? It lists sda, sda1, sda5, sdb and sdb1. The five times before this all ended in disaster letting the installer choose. So I need human intervention. Where is the safe place to do this. The results from the previous attempts left me with only the Ubuntu that would boot, the boot to windows from the grub menu failed every time. Is there a better version of Ubuntu I can use? Is V12.04.01 messed up? My goal is still to use Wine on it to run PC programs. I would like to find a shell or skin or something that makes it seem like windows but have the security and power of Linux under the good. I have seen this type of system and it worked very well. I know I am getting long winded but I have been though at least four of the seven rings of hell already, so I want this install to be the last.

    Read the article

  • How can I "diff" two files with Nautilus?

    - by bioShark
    I have installed Meld and found out it's a great comparing tool. Unfortunately there is no integration with Nautilus 3.2. This means, I can't right click on files and select an option to open them in Meld for comparison. I have seen in the tools comment that the tool need the diff-ext package to be installed. This package has been removed from Ubuntu universe, I am guessing because gtk 3.0. Even if I manually downloaded from source forge the diff-ext package, when I try to configure it the check fails with the message: checking for DIFF_EXT... configure: error: Package requirements (libnautilus-extension >= 2.14.0 gconf-2.0 >= 2.14.0 gnome-vfs-module-2.0 >= 2.14) were not met: No package 'libnautilus-extension' found No package 'gconf-2.0' found No package 'gnome-vfs-module-2.0' found Ok, so from this output I gather that indeed gtk 2 is being required to install the diff extension to nautilus. Now, my question is: Is there a possibility to integrate Meld into Nautilus? Or, are there any other diff based tool which integrate with current Nautilus? So gtk3 based. I am using Ubuntu 11.10 if there was any doubt so far. cheers and thanks in advance.

    Read the article

  • SnapBird Supercharges Your Twitter Searches

    - by ETC
    Twitter’s default search tool is a bit anemic. If you want to supercharge your Twitter search, fire up web-based search tool SnapBird and dig into your past tweets as well as those of friends and followers. Yesterday I was trying to find a tweet I’d sent some time last year regarding my search for an application that could count keystrokes for inclusion in my review of the app I finally found to fulfill the need, KeyCounter. Searching for it with Twitter’s search tool yielded nothing. One simple search at SnapBird and I nailed it. SnapBird requires no authentication to search public tweets (both your own and those of your friends and follows) but does require authentication in order to search through your sent and received direct messages. SnapBird is a free service. SnapBird Latest Features How-To Geek ETC Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines MyPaint is an Open-Source Graphics App for Digital Painters Can the Birds and Pigs Really Be Friends in the End? [Angry Birds Video] Add the 2D Version of the New Unity Interface to Ubuntu 10.10 and 11.04 MightyMintyBoost Is a 3-in-1 Gadget Charger Watson Ties Against Human Jeopardy Opponents Peaceful Tropical Cavern Wallpaper

    Read the article

  • Information about how much time in spent in a function, based on the input of this function

    - by olchauvin
    Is there a (quantitative) tool to measure performance of functions based on its input? So far, the tools I used to measure performance of my code, tells me how much time I spent in functions (like Jetbrain Dottrace for .Net), but I'd like to have more information about the parameters passed to the function in order to know which parameters impact the most the performance. Let's say that I have function like that: int myFunction(int myParam1, int myParam 2) { // Do and return something based on the value of myParam1 and myParam2. // The code is likely to use if, for, while, switch, etc.... } If would like a tool that would allow me to tell me how much time is spent in myFunction based on the value of myParam1 and myParam2. For example, the tool would give me a result looking like this: For "myFunction" : value | value | Number of | Average myParam1 | myParam2 | call | time ---------|----------|-----------|-------- 1 | 5 | 500 | 301 ms 2 | 5 | 250 | 1253 ms 3 | 7 | 1268 | 538 ms ... That would mean that myFunction has been call 500 times with myParam1=1 and myParam2=5, and that with those parameters, it took on average 301ms to return a value. The idea behind that is to do some statistical optimization by organizing my code such that, the blocs of codes that are the most likely to be executed are tested before the one that are less likely to be executed. To put it bluntly, if I know which values are used the most, I can reorganize the if/while/for etc.. structure of the function (and the whole program) to optimize it. I'd like to find such tools for C++, Java or.Net. Note: I am not looking for technical tips to optimize the code (like passing parameters as const, inlining functions, initializing the capacity of vectors and the like).

    Read the article

  • Restoring GRUB2 on Software RAID 0 using LiveCD after Windows 7 wiped it

    - by unknownthreat
    I have installed Ubuntu 10.10 on my system. However, I need to install Windows 7 back, and I expect that it would alter GRUB and it did. Right now, my partition on my Software RAID 0 looks like this: nvidia_acajefec1 is Ubuntu 10.10 and nvidia_acajefec3 is Windows 7. I've been following some guides around and I am always stuck at GRUB not able to detect the usual RAID content. I've tried running: sudo grub > root (hd0,0) GRUB complains it couldn't find my hard disk. So I tried: find (hd0,0) And it complains that it couldn't find anything. So I tried: find /boot/grub/stage1 It said "file not found". Here's the text from the console: ubuntu@ubuntu:~$ grub Probing devices to guess BIOS drives. This may take a long time. [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename. ] grub> root (hd0,0) root (hd0,0) Error 21: Selected disk does not exist grub> find /boot/grub/stage1 find /boot/grub/stage1 Error 15: File not found Fortunately, I got one person suggesting that what I've been trying to do is for GRUB Legacy, not GRUB2. So I went to the suggested website, ** (http://grub.enbug.org/Grub2LiveCdInstallGuide) **try to look around, and try: ubuntu@ubuntu:~$ sudo fdisk -l Unable to seek on /dev/sda This is just the step 2 of the instruction in the http://grub.enbug.org/Grub2LiveCdInstallGuide and I cannot proceed because it cannot seek /dev/sda. However, ubuntu@ubuntu:~$ sudo dmraid -r /dev/sdb: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 /dev/sda: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 So what now? Do you have an idea for how to make fdisk see my RAID array on live cd (Ubuntu 10.10)? Honestly, I am lost, very lost in trying to restore GRUB2 on this software RAID 0 system right now.

    Read the article

  • SSAS Compare version 1.0 released

    - by Red Gate Software BI Tools Team
    We’re pleased to announce that SSAS Compare version 1.0 has been released as a free tool. Version 1.0 includes: Comparisons of live databases and XMLA or Analysis Services Project files MDX syntax diffs and highlighting Server comparisons Deployment wizard with summaries of scripted actions Bug fixes and engine and UI refinements We’ve tested it on as many cube configurations as we could find (not just good old AdventureWorks!), but we can’t provide support for free tools — so if you’re reliant on SSAS Compare for your cube deployment, use it at your own risk. See the user license agreement in the installer for more details. SSAS Compare’s come a long way from its humble beginnings as an internal tool first developed for Red Gate’s own BI developers. Today’s SSAS Compare is now much more stable — not to mention much easier to use — and something the team is proud to have released with Red Gate’s name on. Next: Deployment Manager We’re working on integrating SSAS Compare cube deployment with our new Deployment Manager tool, so you’ll be able to create cube deployment scripts and automate the deployment process, too.  We’re documenting the process in a white paper we’ll publish online in the next week. Thank you! Thanks to all the SSAS Compare users out there. Without your feedback, we could never have produced such a stable product so quickly. We hope you continue to find useful. See you in Deployment Manager!  

    Read the article

  • Black screen with thinkpad edge e525, AMD radeon HD before and after installation, plymouth?

    - by carolien
    I have a new thinkpad edge e525 (which should work) and wanted to try ubuntu (first linux experience). With the ubuntu desktop-cd I had a blackscreen before installation, I could fix that with nomodeset. After the installation, when rebooting I got the black screen again. First I see some ubuntu colour with a green busted stripe. I have the same problem with the live boot, also tried mint live, the stripe gets pink. I installed xubuntu 64bit from an alternate cd and I didnt have problems until de reboot after the installation. Same problem, just a black screen with the green stripe than blackscreen. I tried several things: adding nomodeset to the bootmenu, but than I get: No connection to plymouth and it is stuck at checking the battery status. I tried to replace quiet splash with text. Didnt work either. actually one time I saw a blue booting image before that. I managed to get a root command though via the recovery boot. I didnt dare to just remove the plymouth package. Can I just delete plymouth or do I have to deinstall it as described in several ways. (Problem is, right now the notebook doesnt have a internet connection. And I dont know how to manage it with a usb stick?) Or do I have to install the AMD catalyst driver manually? (Again, how can I do that with an usb stick) I also tried this: Ubuntu hits a black screen after boot. Is there any solution without internet? And if I need internet which is the right one? Please explain step by step what I have to write and so on! Thank you! also tried: set gfxpayload=text and: just remove splash and adding vesafb.nonsense=1 to the grub editor, because I couldnt find it anywhere

    Read the article

  • Unable to mount an LVM Hard-drive after upgrade

    - by Bruce Staples
    I imagine this is a basic gotcha ... but I can't see it. I have a system with 2(physical) harddrives. The boot system (/dev/sda) was running 10.04 & the second drive (/dev/sdb) was just a mounted filesystem. I did a clean load of Ubuntu 12.04 overwriting /dev/sda (not an upgrade) & now cannot mount the second drive. so I do not know what to enter it into the fstab ... I had expected to use: /dev/sdb /tera ext4 defaults 0 2 But even manual mounting fails (I also have tried various "-t" options on the off chance!) sudo mount -t ext4 /dev/sdb1 /tera mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Output from disk queries indicate that it is a Linux LVM & a healthy disk still. sudo lshw -C disk *-disk:0 description: ATA Disk product: WDC WD5000AACS-0 vendor: Western Digital physical id: 0 bus info: scsi@2:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WCASU1401098 size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00015a55 *-disk:1 description: ATA Disk product: WDC WD10EADS-00L vendor: Western Digital physical id: 1 bus info: scsi@3:0.0.0 logical name: /dev/sdb version: 01.0 serial: WD-WCAU47836304 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sudo fdisk -l Disk /dev/sda: 500.1 GB, 500106780160 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976771055 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00015a55 Device Boot Start End Blocks Id System /dev/sda1 * 2048 972580863 486289408 83 Linux /dev/sda2 972582910 976769023 2093057 5 Extended /dev/sda5 972582912 976769023 2093056 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1953525167 976762583+ 8e Linux LVM LVM doesn't appear to be an option for mount or fstab. ... and here's a Smart data Screenshot from Disk Utility.

    Read the article

  • Can I delete Generic kernel if I use Generic

    - by user206049
    I currently can't update my release as there is not enough space on boot. I just have the one kernel version there, but seem to have both the Generic and Low Latency versions. uname -r just shows 3.8.0-32-lowlatency ls -lah /boot shows -rw-r--r-- 1 root root 899K Oct 2 00:00 abi-3.8.0-32-generic -rw-r--r-- 1 root root 899K Oct 7 09:27 abi-3.8.0-32-lowlatency -rw-r--r-- 1 root root 152K Oct 2 00:00 config-3.8.0-32-generic -rw-r--r-- 1 root root 152K Oct 7 09:27 config-3.8.0-32-lowlatency drwxr-xr-x 3 root root 2.0K Jan 1 1970 efi drwxr-xr-x 5 root root 1.0K Oct 22 10:05 grub -rw-r--r-- 1 root root 32M Oct 22 09:51 initrd.img-3.8.0-32-generic -rw-r--r-- 1 root root 32M Oct 22 10:05 initrd.img-3.8.0-32-lowlatency drwxr-xr-x 2 root root 12K Feb 25 2013 lost+found -rw-r--r-- 1 root root 173K Dec 5 2012 memtest86+.bin -rw-r--r-- 1 root root 175K Dec 5 2012 memtest86+_multiboot.bin -rw------- 1 root root 3.0M Oct 2 00:00 System.map-3.8.0-32-generic -rw------- 1 root root 3.0M Oct 7 09:27 System.map-3.8.0-32-lowlatency -rw------- 1 root root 5.2M Oct 2 00:00 vmlinuz-3.8.0-32-generic -rw------- 1 root root 5.2M Oct 7 09:27 vmlinuz-3.8.0-32-lowlatency So what can I do to allow me to update? Apparently I need 174m on boot and am 40m short.

    Read the article

  • Getting "Unable to find a medium containing a live file system" when installing 10.10

    - by Krastin Konstantinov
    I got this error while trying to install ubuntu 10.10 from a bootable USB stick on to Sony Vaio P series laptop. The disk boots into the language and installation type screen. After that it goes through the splash and pulls up this error: BusyBox v1.13.3 (Ubuntu 1:1.13.3-ubuntu11) built in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) Unable to find a medium containing a live file system After getting this error the installation fails to start. I have used the same USB stick on some other laptops and the installation started as usual. Any help will be appreciated. My installation is i386 and my machine is Vaio P VGN-P610. I've tried every possible thing: Bios: [enable boot external] Boot order: [external] [hard drive] [network boot] Tried 2 different USB drives Tried 2 different external CD drives Tried 6 different downloads of both the desktop and netbook remix. All downloads were checked with MD5SUM. Ubuntu Desktop 9.10 installs properly in every version and from every source. Getting reaaaally frustrated.

    Read the article

  • Dell Upgrade to 12.04 LTS No wifi, graphic card driver and bluetooth Problem?

    - by Mattlinux1
    (Dell inspiron m5040 Upgrade to 12.04 LTS from 11.10 wifi wont work and has two bluetooth icons?) Old title of post! No Wifi/Bluetooth Problem. "Both Fixed", see below comments for bluetooth fix and see bottom answer for wifi fix. My online upgrade of 12.04 LTS, was installed to my laptop the Dell inspiron m5040, when it was done i found that my wifi did not even get picked up anymore and i now have two bluetooth icons at the top?? So what i have been doing for now is at the boot screen. I hit the use previous linux version, this works fine but also has the two bluetooth at the top. Is very thankful for any answers for this fix, Thank You. Ok bluetooth problem solved by – fossfreedom answer by deleting the other bluetooth program running in software center. Now the other problem is Wifi: just have to restart system as it works in previous linux version boot opt, but on the first boot screen opt run ubuntu it will not pick up wifi drivers. Broadcom 802.11 Linux STA wireless driverfor use with Broadcom's BCM4311-, BCM4312-, BCM4313-, BCM4321-,BCM4322-, BCM43224-, and BCM43225-, BCM43227- and BCM43228-basedhardware. And 3D-accelerated proprietary graphics driver for ATI cards. This driver is required to fully utilise the 3D potential of some ATI graphics cards, as well as provide 2D acceleration of newer cards. will not instill is there anyway for me to make a copy of the drivers via usb HDD and then put them on new upgraded version.

    Read the article

  • Unable to mount USBDRIVE Error creating moint point: Permission denied

    - by steve
    Whenever I plug a usb into my computer a window pops up and says Unable to mount [Name of USB] Error creating moint point: Permission denied steve@goliath:/$ uname -a Linux goliath 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux steve@goliath:/$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0f716ee1 Device Boot Start End Blocks Id System /dev/sda1 1 234441647 117220823+ ee GPT WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0f710ee1 Device Boot Start End Blocks Id System /dev/sdb1 1 2930277167 1465138583+ ee GPT Disk /dev/sdc: 16.0 GB, 16005464064 bytes 74 heads, 10 sectors/track, 42244 cylinders, total 31260672 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdc1 8064 31260671 15626304 c W95 FAT32 (LBA) steve@goliath:/$ sudo mkdir /media/external mkdir: cannot create directory `/media/external': Permission denied steve@goliath:/$ sudo mkdir /media/usb0 mkdir: cannot create directory `/media/usb0': Permission denied steve@goliath:/$ sudo ls -l / | grep media drwxr-xr-x 3 root root 4096 Oct 3 22:48 media steve@goliath:/$ ls /media/ -a . .. MediaShare MediaShare is the the directory on my server that has all my movies and music. If there is any information I left out please let me know.

    Read the article

  • How to switch to a generic kernel in a headless Ubuntu Server 12.04?

    - by chmike
    I just got a dedicated server with Ubuntu 12.04 installed with a custom compiled kernel. Since I would like to install VirtualBox and this custom kernel doesn't support dynamic module loading (for security) I need to change the kernel. I'm running some Ubuntu servers for years but never palyed with grub and a headless computer. When the command update-grub is run it shows the different kernel it finds. Here is what I see Generating grub.cfg ... Found linux image: /boot/bzImage-3.2.13-xxxx-grs-ipv6-64 Found linux image: /boot/vmlinuz-3.2.0-34-generic Found initrd image: /boot/initrd.img-3.2.0-34-generic No volume groups found done The first one is the active one as seen with uname -r. To me it looks like the second kernel is the one I should use. But I don't know how to configure grub2 to use it. The computer is also configured with a software RAID using mdadm I guess. Never used that before. I don't know if playing with the grub of changing kernel could brake this. What must I do to set the generic kernel as the default one so that I can get VirtualBox running.

    Read the article

  • Armchair CEO: Windows

    - by Scott Kuhl
    Originally posted on: http://geekswithblogs.net/scottkuhl/archive/2013/10/12/armchair-ceo-windows.aspxWelcome to part 3 of my Armchair CEO series where I prove just why I’m not running Microsoft.  In this insightful edition I’ll tell you how to make Windows, the golden flagship of Microsoft, a better product. Android Apps Windows Phone is not the only app store that needs a boost.  But unlike Windows Phone, there is a very easy way to get a lot more apps on your Windows PC: BlueStacks.  Right now BlueStacks has 3 things going against it: its UI integration is a desktop app hack, it does not work on RT, and no one know about it.  All three could be fixed if Microsoft bought the company or pulled off the same thing.  The store can be designed to give preference to Windows Store apps but it closes a lot of holes quickly. The Desktop Experience Windows should switch between desktop mode and tablet mode automatically.  Laptops without touch and desktops should work a lot more like Windows 7.  The PC should boot to desktop and Metro apps should run in windows, like MetroMix.  A tablet should boot to the Start Screen by default and pretty much work the same way it does now in 8.1.  Touch laptops should give the user an in your face option on first boot to pick the experience.  And finally, the experience can be changed automatically if the PC is docked or has external monitors hooked up. Death of the Desktop This might seem completely opposite to the last feature, but its not.  I should have no need to ever see the desktop from Start Screen mode.  Every settings needs to be available, an amazing port of the file explorer is needed, and Office Metro must be released.  Desktop apps should also be able to run in full screen mode like other Metro apps.

    Read the article

  • Update fails to Install

    - by FirmTech
    I get the below error when I try to install updates using Software Updater: Not enough free disk space The upgrade needs a total of 81.3 M free space on disk '/boot'. Please free at least an additional 15.9 M of disk space on '/boot'. Empty your trash and remove temporary packages of former installations using 'sudo apt-get clean'. What should I do? firmtechnologies@FirmTechnologies:~$ (ls -l /boot) total 155801 -rw-r--r-- 1 root root 1158016 May 3 01:30 abi-3.13.0-24-generic -rw-r--r-- 1 root root 1161713 May 8 01:31 abi-3.13.0-26-generic -rw-r--r-- 1 root root 1161713 May 15 20:07 abi-3.13.0-27-generic -rw-r--r-- 1 root root 1161764 Jun 4 22:57 abi-3.13.0-29-generic -rw-r--r-- 1 root root 165510 May 3 01:30 config-3.13.0-24-generic -rw-r--r-- 1 root root 165538 May 8 01:31 config-3.13.0-26-generic -rw-r--r-- 1 root root 165521 May 15 20:07 config-3.13.0-27-generic -rw-r--r-- 1 root root 165544 Jun 4 22:57 config-3.13.0-29-generic drwxr-xr-x 5 root root 1024 Jun 6 14:31 grub -rw-r--r-- 1 root root 29091568 May 7 21:31 initrd.img-3.13.0-24-generic -rw-r--r-- 1 root root 29094684 May 12 12:24 initrd.img-3.13.0-26-generic -rw-r--r-- 1 root root 29095678 May 18 10:57 initrd.img-3.13.0-27-generic -rw-r--r-- 1 root root 29093700 Jun 6 14:32 initrd.img-3.13.0-29-generic drwx------ 2 root root 12288 Apr 30 17:11 lost+found -rw-r--r-- 1 root root 176500 Mar 12 13:31 memtest86+.bin -rw-r--r-- 1 root root 178176 Mar 12 13:31 memtest86+.elf -rw-r--r-- 1 root root 178680 Mar 12 13:31 memtest86+_multiboot.bin -rw------- 1 root root 3372643 May 3 01:30 System.map-3.13.0-24-generic -rw------- 1 root root 3377429 May 8 01:31 System.map-3.13.0-26-generic -rw------- 1 root root 3377429 May 15 20:07 System.map-3.13.0-27-generic -rw------- 1 root root 3378267 Jun 4 22:57 System.map-3.13.0-29-generic -rw------- 1 root root 5776416 May 3 01:30 vmlinuz-3.13.0-24-generic -rw------- 1 root root 5790912 May 8 01:30 vmlinuz-3.13.0-26-generic -rw------- 1 root root 5790912 May 15 20:07 vmlinuz-3.13.0-27-generic -rw------- 1 root root 5792544 Jun 4 22:57 vmlinuz-3.13.0-29-generic

    Read the article

< Previous Page | 232 233 234 235 236 237 238 239 240 241 242 243  | Next Page >