Search Results

Search found 6599 results on 264 pages for 'me myself and i'.

Page 236/264 | < Previous Page | 232 233 234 235 236 237 238 239 240 241 242 243  | Next Page >

• Minimum team development sizes

  - by MarkPearl

  Disclaimer - these are observations that I have had, I am not sure if this follows the philosophy of scrum, agile or whatever, but most of these insights were gained while implementing a scrum scenario. Two is a partnership, three starts a team For a while I thought that a team was anything more than one and that scrum could be effective methodology with even two people. I have recently adjusted my thinking to a scrum team being a minimum of three, so what happened to two and what do you call it? For me I consider a group of two people working together a partnership - there is value in having a partnership, but some of the dynamics and value that you get from having a team is lost with a partnership. Avoidance of a one on one confrontation The first dynamic I see missing in a partnership is the team motivation to do better and how this is delivered to individuals that are not performing. Take two highly motivated individuals and put them together and you will typically see them continue to perform. Now take a situation where you have two individuals, one performing and one not and the behaviour is totally different compared to a team of three or more individuals. With two people, if one feels the other is not performing it becomes a one on one confrontation. Most people avoid confrontations and so nothing changes. Compare this to a situation where you have three people in a team, 2 performing and 1 not the dynamic is totally different, it is no longer a personal one on one confrontation but a team concern and people seem more willing to encourage the individual not performing and express their dissatisfaction as a team if they do not improve. Avoiding the effects of Tuckman’s Group Development Theory If you are not familiar with Tuckman’s group development theory give it a read (http://en.wikipedia.org/wiki/Tuckman's_stages_of_group_development) In a nutshell with Tuckman’s theory teams go through these stages of Forming, Storming, Norming & Performing. You want your team to reach and remain in the Performing stage for as long as possible - this is where you get the most value. When you have a partnership of two and you change the individuals in the partnership you basically do a hard reset on the partnership and go back to the beginning of Tuckman’s model each time. This has a major effect on the performance of a team and what they can deliver. What I have seen is that you reduce the effects of Tuckman's theory the more individuals you have in the team (until you hit the maximum team size in which other problems kick in). While you will still experience Tuckman's theory with a team of three, the impact will be greatly reduced compared to two where it is guaranteed every time a change occurs. It's not just in the numbers, it's in the people One final comment - while the actual numbers of a team do play a role, the individuals in the team are even more important - ideally you want to keep individuals working together for an extended period. That doesn't mean that you never change the individuals in a team, or that once someone joins a team they are stuck there - there is value in an individual moving from team to team and getting cross pollination, but the period of time that an individual moves should be in month's or years, not days or weeks. Why? So why is it important to know this? Why is it important to know how a team works and what motivates them? I have been asking myself this question for a while and where I am at right now is this… the aim is to achieve the stage where the sum of the total (team) is greater than the sum of the parts (team members). This is why we form teams and why understanding how they work is a challenge and also extremely stimulating.

  Read the article

• Learn Many Languages

  - by Jeff Foster

  My previous blog, Deliberate Practice, discussed the need for developers to “sharpen their pencil” continually, by setting aside time to learn how to tackle problems in different ways. However, the Sapir-Whorf hypothesis, a contested and somewhat-controversial concept from language theory, seems to hold reasonably true when applied to programming languages. It states that: “The structure of a language affects the ways in which its speakers conceptualize their world.” If you’re constrained by a single programming language, the one that dominates your day job, then you only have the tools of that language at your disposal to think about and solve a problem. For example, if you’ve only ever worked with Java, you would never think of passing a function to a method. A good developer needs to learn many languages. You may never deploy them in production, you may never ship code with them, but by learning a new language, you’ll have new ideas that will transfer to your current “day-job” language. With the abundant choices in programming languages, how does one choose which to learn? Alan Perlis sums it up best. “A language that doesn‘t affect the way you think about programming is not worth knowing“ With that in mind, here’s a selection of languages that I think are worth learning and that have certainly changed the way I think about tackling programming problems. Clojure Clojure is a Lisp-based language running on the Java Virtual Machine. The unique property of Lisp is homoiconicity, which means that a Lisp program is a Lisp data structure, and vice-versa. Since we can treat Lisp programs as Lisp data structures, we can write our code generation in the same style as our code. This gives Lisp a uniquely powerful macro system, and makes it ideal for implementing domain specific languages. Clojure also makes software transactional memory a first-class citizen, giving us a new approach to concurrency and dealing with the problems of shared state. Haskell Haskell is a strongly typed, functional programming language. Haskell’s type system is far richer than C# or Java, and allows us to push more of our application logic to compile-time safety. If it compiles, it usually works! Haskell is also a lazy language – we can work with infinite data structures. For example, in a board game we can generate the complete game tree, even if there are billions of possibilities, because the values are computed only as they are needed. Erlang Erlang is a functional language with a strong emphasis on reliability. Erlang’s approach to concurrency uses message passing instead of shared variables, with strong support from both the language itself and the virtual machine. Processes are extremely lightweight, and garbage collection doesn’t require all processes to be paused at the same time, making it feasible for a single program to use millions of processes at once, all without the mental overhead of managing shared state. The Benefits of Multilingualism By studying new languages, even if you won’t ever get the chance to use them in production, you will find yourself open to new ideas and ways of coding in your main language. For example, studying Haskell has taught me that you can do so much more with types and has changed my programming style in C#. A type represents some state a program should have, and a type should not be able to represent an invalid state. I often find myself refactoring methods like this… void SomeMethod(bool doThis, bool doThat) { if (!(doThis ^ doThat)) throw new ArgumentException(“At least one arg should be true”); if (doThis) DoThis(); if (doThat) DoThat(); } …into a type-based solution, like this: enum Action { DoThis, DoThat, Both }; void SomeMethod(Action action) { if (action == Action.DoThis || action == Action.Both) DoThis(); if (action == Action.DoThat || action == Action.Both) DoThat(); } At this point, I’ve removed the runtime exception in favor of a compile-time check. This is a trivial example, but is just one of many ideas that I’ve taken from one language and implemented in another.

  Read the article

• I am trying to figure out the best way to understand how to cache domain objects

  - by Brett Ryan

  I've always done this wrong, I'm sure a lot of others have too, hold a reference via a map and write through to DB etc.. I need to do this right, and I just don't know how to go about it. I know how I want my objects to be cached but not sure on how to achieve it. What complicates things is that I need to do this for a legacy system where the DB can change without notice to my application. So in the context of a web application, let's say I have a WidgetService which has several methods: Widget getWidget(); Collection<Widget> getAllWidgets(); Collection<Widget> getWidgetsByCategory(String categoryCode); Collection<Widget> getWidgetsByContainer(Integer parentContainer); Collection<Widget> getWidgetsByStatus(String status); Given this, I could decide to cache by method signature, i.e. getWidgetsByCategory("AA") would have a single cache entry, or I could cache widgets individually, which would be difficult I believe; OR, a call to any method would then first cache ALL widgets with a call to getAllWidgets() but getAllWidgets() would produce caches that match all the keys for the other method invocations. For example, take the following untested theoretical code. Collection<Widget> getAllWidgets() { Entity entity = cache.get("ALL_WIDGETS"); Collection<Widget> res; if (entity == null) { res = loadCache(); } else { res = (Collection<Widget>) entity.getValue(); } return res } Collection<Widget> loadCache() { // Get widgets from underlying DB Collection<Widget> res = db.getAllWidgets(); cache.put("ALL_WIDGETS", res); Map<String, List<Widget>> byCat = new HashMap<>(); for (Widget w : res) { // cache by different types of method calls, i.e. by category if (!byCat.containsKey(widget.getCategory()) { byCat.put(widget.getCategory(), new ArrayList<Widget>); } byCat.get(widget.getCatgory(), widget); } cacheCategories(byCat); return res; } Collection<Widget> getWidgetsByCategory(String categoryCode) { CategoryCacheKey key = new CategoryCacheKey(categoryCode); Entity ent = cache.get(key); if (entity == null) { loadCache(); } ent = cache.get(key); return ent == null ? Collections.emptyList() : (Collection<Widget>)ent.getValue(); } NOTE: I have not worked with a cache manager, the above code illustrates cache as some object that may hold caches by key/value pairs, though it's not modelled on any specific implementation. Using this I have the benefit of being able to cache all objects in the different ways they will be called with only single objects on the heap, whereas if I were to cache the method call invocation via say Spring It would (I believe) cache multiple copies of the objects. I really wish to try and understand the best ways to cache domain objects before I go down the wrong path and make it harder for myself later. I have read the documentation on the Ehcache website and found various articles of interest, but nothing to give a good solid technique. Since I'm working with an ERP system, some DB calls are very complicated, not that the DB is slow, but the business representation of the domain objects makes it very clumsy, coupled with the fact that there are actually 11 different DB's where information can be contained that this application is consolidating in a single view, this makes caching quite important.

  Read the article

• Libgdx 2D Game, Random generated World of random size, how to get mouse coordinates?

  - by Solom

  I'm a noob and English is not my mothertongue, so please bear with me! I'm generating a map for a Sidescroller out of a 2D-array. That is, the array holds different values and I create blocks based on that value. Now, my problem is to match mouse coordinates on screen with the actual block the mouse is pointing at. public class GameScreen implements Screen { private static final int WIDTH = 100; private static final int HEIGHT = 70; private OrthographicCamera camera; private Rectangle glViewport; private Spritebatch spriteBatch; private Map map; private Block block; ... @Override public void show() { camera = new OrthographicCamera(WIDTH, HEIGHT); camera.position.set(WIDTH/2, HEIGHT/2, 0); glViewport = new Rectangle(0, 0, WIDTH, HEIGHT); map = new Map(16384, 256); map.printTileMap(); // Debugging only spriteBatch = new SpriteBatch(); } @Override public void render(float delta) { // Clear previous frame Gdx.gl.glClearColor(1, 1, 1, 1 ); Gdx.gl.glClear(GL20.GL_COLOR_BUFFER_BIT); GL30 gl = Gdx.graphics.getGL30(); // gl.glViewport((int) glViewport.x, (int) glViewport.y, (int) glViewport.width, (int) glViewport.height); spriteBatch.setProjectionMatrix(camera.combined); camera.update(); spriteBatch.begin(); // Draw Map this.drawMap(); // spriteBatch.flush(); spriteBatch.end(); } private void drawMap() { for(int a = 0; a < map.getHeight(); a++) { // Bounds check (y) if(camera.position.y + camera.viewportHeight < a)// || camera.position.y - camera.viewportHeight > a) break; for(int b = 0; b < map.getWidth(); b++) { // Bounds check (x) if(camera.position.x + camera.viewportWidth < b)// || camera.position.x > b) break; // Dynamic rendering via BlockManager int id = map.getTileMap()[a][b]; Block block = BlockManager.map.get(id); if(block != null) // Check if Air { block.setPosition(b, a); spriteBatch.draw(block.getTexture(), b, a, 1 ,1); } } } } As you can see, I don't use the viewport anywhere. Not sure if I need it somewhere down the road. So, the map is 16384 blocks wide. One block is 16 pixels in size. One of my naive approaches was this: if(Gdx.input.isButtonPressed(Input.Buttons.LEFT)) { Vector3 mousePos = new Vector3(); mousePos.set(Gdx.input.getX(), Gdx.input.getY(), 0); camera.unproject(mousePos); System.out.println(Math.round(mousePos.x)); // *16); // Debugging // TODO: round // map.getTileMap()[mousePos.x][mousePos.y] = 2; // Draw at mouse position } I confused myself somewhere down the road I fear. What I want to do is, update the "block" (or rather the information in the Map/2D-Array) so that in the next render() there is another block. Basically drawing on the spriteBatch g So if anyone could point me in the right direction this would be highly appreciated. Thanks!

  Read the article

• Experimenting with other search engines

  - by Bill Graziano

  I’ve been a Google user so long I can hardly remember what I used before it.  Alta Vista maybe?  Or Yahoo.  I’ve tried Bing off and on but it never really stuck.  I probably care more about search engines than your average user because of their impact on SQLTeam.com.  Lately I’ve been trying two other search engines and actually switched to one of them. I’ve played with Blekko a little in the past.  They have some interesting ways to “slice up” your results.  For example, searching on “SQL Server /blogs /date” should just search all the recently updated blogs.  Those two extra words on the search are slashtags.  The full list of slashtags runs from /forums to just see forums to /twitter to /nikon to /reviews and on and on and on.  I laughed when I saw they had slashtags for both liberal and conservative.  I’d hate to find any search results that don’t match my existing worldview :)  You can also create your own slashtags.  I created a mini-search engine for the SQL Server blogs that I read.  You can search it for “backup” at http://blekko.com/ws/backup+/billgraziano/sql-sites.  I uploaded my OPML and it limited the search to just those sites.  It seems like the site is focusing more on curating results and less on algorithms.  This is an interesting site for those power searchers.  There are some great ways to curate results using slashtags.  For 99% of my searches (type words, click on one of the first few links) slashtags are overkill.  They do have some good information on page and site ranking though so I’ll probably send some time looking through that. Blekko recently got my attention again when they said they were banning “content farms” - and that includes eHow and experts-exchange.  I always feel used when I click on a link to EE and find myself scrolling all the way to the bottom to see if I can find the answer.  Sometimes it’s there but sometimes it tells me I need to pay first.  I’ve longed for a way to always exclude certain sites.  Blekko might be taking a hammer to a problem that needs a scalpel but it’s an interesting choice.  (And some of the comments in the TechCrunch link are interesting if you’re a search nerd.) DuckDuckGo is an odd name for a search engine.  Their big hook is that they don’t have search history.  If you wade through your Google account you can probably find the page where it stores your search history.  It was pretty enlightening to find mine.  It was easy to disable but that got me started looking at other search engines.  DDG (or DukGo) just feels like Google used to in the old days.  The results are good enough and the site is fast. Searches will return a snippet from WikiPedia or other site (like StackOverflow) at the top.  I think the idea is to answer the question without needing to visit the site.  I’m not sure that’s a good thing for SQLTeam.com. The only thing I really miss is image search.  You can add a “!i” at the end of any search and it will search the images on Bing.  Bing doesn’t have a great image search but it works for most of what I need.  They call these exclamation marks “!bangs” and they are kinda, sorta like slashtags.  I’ve been using DuckDuckGo now for a few weeks and I’m pretty happy with it.  I use Chrome for my browser and it was an easy switch to make.  It’s still a little surprising seeing my search results come up in a different format.  I’m starting to get used to it though.

  Read the article

• Making it GREAT! Oracle Partners Building Apps Workshop with UX and ADF in UK

  - by ultan o'broin

  Yes, making is what it's all about. This time, Oracle Partners in the UK were making great looking usable apps with the Oracle Applications Development Framework (ADF) and user experience (UX) toolkit. And what an energy-packed and productive event at the Oracle UK, Thames Valley Park, location it was. Partners learned the fundamentals of enterprise applications UX, why it's important, all about visual design, how to wireframe designs, and then how to build their already-proven designs in ADF. There was a whole day on mobile apps, learning about mobile design principles, free mobile UX and ADF resources from Oracle, and then trying it out. The workshop wrapped up with the latest Release 7 simplified UIs, Mobilytics, and other innovations from Oracle, and a live demo of a very neat ADF Mobile Android app built by an Oracle contractor. And, what a fun two days both Grant Ronald of ADF and myself had in running the workshop with such a great audience, too! I particularly enjoyed the wireframing and visual design sessions interaction; and seeing some outstanding work done by partners. Of note from the UK workshop were innovative design features not seen before and made me all the happier that developers were bringing their own ideas from the consumer IT world of mobility, simplicity, and social to the world of work apps in a smart way within an enterprise methodology too.  Partner wireframe exercise. Applying mobile design principles and UX design patterns means you've already productively making great usable apps! Next, over to Oracle ADF Mobile with it! One simple example from the design of a mobile field service app was that participants immediately saw how the UX and device functionality of the super UK-based app Hailo app could influence their designs (the London cabbie influence maybe?), as well as how we all use maps, cameras, barcode scanners and microphones on our phones could be used in work. And, of course, ADF Mobile has the device integration solutions there too! I wonder will U.S. workshops in Silicon Valley see an Uber UX influence (LOL)! That we also had partners experienced with Oracle Forms who could now offer a roadmap from Forms to Simplified UI and Mobile using ADF, and do it through through the cloud, really made this particular workshop go "ZING!" for me. Many thanks to the Oracle PartnerNetwork (OPN) team for organizing this event with us, and to the representatives of the Oracle Partners that showed and participated so well. That's what I love out this outreach. It's a two-way, solid value-add for all. Interested? Why would partners and developers with ADF skills sign up for this workshop? Here's why: Learn to use the Oracle Applications User Experience design patterns as the usability building blocks for applications development in Oracle Application Development Framework. The workshop enables attendees to build modern and visually compelling desktop and mobile applications that look and behave like Oracle Cloud Applications, and that can co-exist with partner integrations, new, or existing applications deployments. Partners learn to offer customers and clients more than just coded functionality; instead they can provide a complete user experience with a roadmap for continued ROI from applications that also creating more business and attracts the kudos and respect from other makers of apps as they're wowed by the results. So, if you're a partner and interested in attending one of these workshops and benefitting from such learning, as well as having a platform to show off some of your own work, stay well tuned to your OPN channels, to this blog, to the VoX blog, and to the @usableapps Twitter account too. Can't wait? For developers and partners, some key mobile resources to explore now Oracle ADF Mobile UX Patterns and Components Wiki Oracle ADF Academy (Mobile) Oracle ADF Insider Essentials Oracle Applications Mobile User Experience Design Patterns and Guidance

  Read the article

• Why Apple’s New SDK Limitation is So Offensive

  - by TStewartDev

  I am not an Apple fanboy, nor have I ever been. However, I have owned a Mac, an iPod, and an iPhone in my lifetime, and for more than a decade, I have defended Apple against the untruths that the haters so enjoy spewing. I encouraged my wife to buy a MacBook when she needed a new laptop two years ago, and I often recommend them to my friends and relatives. I have proudly and happily used my first generation iPhone for nearly three years. Now, for the first time in well over ten years, I find myself ready to swear off Apple and encourage everyone I know to do the same. I was disappointed when Apple wouldn't allow native apps, but I still bought the iPhone. I've stomached their ambiguous app approval process even though it's apparent that Steve may just reject your app because he doesn't like you or feels threatened by you (I'm still lamenting the rejection of the Google Voice app). But, as a developer, I can no longer tolerate Apple's terms and the kind of totalitarian control they indicate Apple wants. In case you are not already familiar, Apple has dictated in their OS 4.0 SDK license agreement (the now infamous Section 3.3.1) that all apps developed for the iPhone must be coded in C, C++, or Objective C, and moreover, that using any cross-compiling platforms is a violation of the agreement. For those of you who aren't developers, let me try to illustrate why this angers those of us who are. Imagine you're a professional writer. You've had articles published in some journals and magazines, and you've got a couple popular books out there, too. You've got an idea for a new book, and so you take it to your publisher. Your publisher agrees that it's a good idea. "But," says the publisher, "we want to hold our books to a tighter standard so that our readers get the experience we want them to have. Therefore, from now on, all our writers may only use words from this list of the 10,000 most common English words. Furthermore, if you cite any other works or quote anyone, they must comply with that same list, or you'll have to rewrite the entire work as well in case our readers want to look up your citation." What do you do? If your work is a children's book, this probably isn't a big deal to you. If it's an autobiography, textbook, or even a novel, though, you're going to have a lot of trouble describing your content with only common words. It's going to take you longer to complete your book, too, since you'll be looking up less common words frequently to see if you can use them. You could always go to another publisher, but this one has the best ability to distribute your book. The next largest distributor can only do a quarter as much. You could abandon the project altogether, but then everyone loses. Isn't this a silly scenario? Who would put such a limitation on writers? Yet this is very much what Apple is doing. They are using their dominant position in the market to coerce developers to write their apps exclusively for the iPhone OS by making it too expensive to write for multiple platforms. It is at least a threefold attack, striking at Adobe who is set to release a compiler that lets Flash source be compiled to iPhone binaries; striking at Google whose Android platform stands the best chance at the moment of providing serious competition to the iPhone; and reinforcing their own strong position by keeping popular apps exclusively to iPhone. And while developers are already very upset about this, the sad fact is that most of us will cave and give in to Apple because consumers don't know any better. They will continue to buy Apple's toy forcing developers to play Apple's maniacal game in order to make any money, at least until Steve Jobs decides he doesn't like them or he intends to release a competing application (bye-bye OpenFeint). Apple has been kept in check on the desktop front by a very dominant Microsoft, but I'm afraid that their success with iPods, iTunes, and iPhones has created a monster that we may have to bear until it is slain by an anti-trust suit or dies with the retirement of Steve Jobs.

  Read the article

• Pro/con of using Angular directives for complex form validation/ GUI manipulation

  - by tengen

  I am building a new SPA front end to replace an existing enterprise's legacy hodgepodge of systems that are outdated and in need of updating. I am new to angular, and wanted to see if the community could give me some perspective. I'll state my problem, and then ask my question. I have to generate several series of check boxes based on data from a .js include, with data like this: $scope.fieldMappings.investmentObjectiveMap = [ {'id':"CAPITAL PRESERVATION", 'name':"Capital Preservation"}, {'id':"STABLE", 'name':"Moderate"}, {'id':"BALANCED", 'name':"Moderate Growth"}, // etc {'id':"NONE", 'name':"None"} ]; The checkboxes are created using an ng-repeat, like this: <div ng-repeat="investmentObjective in fieldMappings.investmentObjectiveMap"> ... </div> However, I needed the values represented by the checkboxes to map to a different model (not just 2-way-bound to the fieldmappings object). To accomplish this, I created a directive, which accepts a destination array destarray which is eventually mapped to the model. I also know I need to handle some very specific gui controls, such as unchecking "None" if anything else gets checked, or checking "None" if everything else gets unchecked. Also, "None" won't be an option in every group of checkboxes, so the directive needs to be generic enough to accept a validation function that can fiddle with the checked state of the checkbox group's inputs based on what's already clicked, but smart enough not to break if there is no option called "NONE". I started to do that by adding an ng-click which invoked a function in the controller, but in looking around Stack Overflow, I read people saying that its bad to put DOM manipulation code inside your controller - it should go in directives. So do I need another directive? So far: (html): <input my-checkbox-group type="checkbox" fieldobj="investmentObjective" ng-click="validationfunc()" validationfunc="clearOnNone()" destarray="investor.investmentObjective" /> Directive code: .directive("myCheckboxGroup", function () { return { restrict: "A", scope: { destarray: "=", // the source of all the checkbox values fieldobj: "=", // the array the values came from validationfunc: "&" // the function to be called for validation (optional) }, link: function (scope, elem, attrs) { if (scope.destarray.indexOf(scope.fieldobj.id) !== -1) { elem[0].checked = true; } elem.bind('click', function () { var index = scope.destarray.indexOf(scope.fieldobj.id); if (elem[0].checked) { if (index === -1) { scope.destarray.push(scope.fieldobj.id); } } else { if (index !== -1) { scope.destarray.splice(index, 1); } } }); } }; }) .js controller snippet: .controller( 'SuitabilityCtrl', ['$scope', function ( $scope ) { $scope.clearOnNone = function() { // naughty jQuery DOM manipulation code that // looks at checkboxes and checks/unchecks as needed }; The above code is done and works fine, except the naughty jquery code in clearOnNone(), which is why I wrote this question. And here is my question: after ALL this, I think to myself - I could be done already if I just manually handled all this GUI logic and validation junk with jQuery written in my controller. At what point does it become foolish to write these complicated directives that future developers will have to puzzle over more than if I had just written jQuery code that 99% of us would understand with a glance? How do other developers draw the line? I see this all over Stack Overflow. For example, this question seems like it could be answered with a dozen lines of straightforward jQuery, yet he has opted to do it the angular way, with a directive and a partial... it seems like a lot of work for a simple problem. Specifically, I suppose I would like to know: how SHOULD I be writing the code that checks whether "None" has been selected (if it exists as an option in this group of checkboxes), and then check/uncheck the other boxes accordingly? A more complex directive? I can't believe I'm the only developer that is having to implement code that is more complex than needed just to satisfy an opinionated framework.

  Read the article

• Some PowerShell goodness

  - by KyleBurns

  Ever work somewhere where processes dump files into folders to maintain an archive?  Me too and Windows Explorer hates it.  Very often I find myself needing to organize these files into subfolders so that I can go after files without locking up Windows Explorer and my answer used to be to write a program in something like C# to do the job.  These programs will typically enumerate the files in a folder and move each file to a subdirectory named based on a datestamp.  The last such program I wrote had to use lower-level Win32 API calls to perform the enumeration because it appears the standard .Net calls make use of the same method of enumerating the directories that Windows Explorer chokes on when dealing with a large number of entries in a particular directory, so a simple task was accomplished with a lot of code. Of course, this little utility was just something I used to make my life easier and "not a production app", so it was in my local source folder and not source control when my hard drive died.  So... I was getting ready to re-create it and thought it might be a good idea to play with PowerShell a bit - something I had been wanting to do but had not yet met a requirement to make me do it.  The resulting script was amazingly succinct and even building the flexibility for parameterization and adding line breaks for readability was only about 25 lines long.  Here's the code with discussion following: param(     [Parameter(         Mandatory = $false,         Position = 0,         HelpMessage = "Root of the folders or share to archive.  Be sure to end with appropriate path separator"     )]     [String] $folderRoot="\\fileServer\pathToFolderWithLotsOfFiles\",       [Parameter(         Mandatory = $false,         Position = 1     )]     [int] $days = 1 ) dir $folderRoot|?{(!($_.PsIsContainer)) -and ((get-date) - $_.lastwritetime).totaldays -gt $days }|%{     [string]$year=$([string]$_.lastwritetime.year)     [string]$month=$_.lastwritetime.month     [string]$day=$_.lastwritetime.day     $dir=$folderRoot+$year+"\"+$month+"\"+$day     if(!(test-path $dir)){         new-item -type container $dir     }     Write-output $_     move-item $_.fullname $dir } The script starts by declaring two parameters.  The first parameter holds the path to the folder that I am going to be sorting into subdirectories.  The path separator is intended to be included in this argument because I didn't want to mess with determining whether this was local or UNC and picking the right separator in code, but this could be easily improved upon using Path.Combine since PowerShell has access to the full framework libraries.  The second parameter holds a minimum age in days for files to be removed from the root folder.  The script then pipes the dir command through a query to include only files (by excluding containers) and of those, only entries that meet the age requirement based on the last modified datestamp.  For each of those, the datestamp is used to construct a folder name in the format YYYY\MM\DD (if you're in an environment where even a day's worth of files need further divided, you could make this more granular) and the folder is created if it does not yet exist.  Finally, the file is moved into the directory. One of the things that was really cool about using PowerShell for this task is that the new-item command is smart enough to create the entire subdirectory structure with a single call.  In previous code that I have written to do this kind of thing, I would have to test the entire tree leading down to the subfolder I want, leading to a lot of branching code that detracted from being able to quickly look at the code and understand the job it performs. Overall, I have to say I'm really pleased with what has been done making PowerShell powerful and useful.

  Read the article

• Is Your Company Social on the Inside?

  - by Mike Stiles

  As we talk about the extension of social from an outbound-facing marketing tool to a platform that will reach across the entire enterprise, servicing multiple functions of that enterprise, it might be time to take a look at how social can be effectively employed for internal communications. Remember the printed company newsletter? Yeah, nobody reads it. Remember the emailed company newsletter? Yeah, nobody reads it. Why not? Shouldn’t your employees care about the company more than anything else in life and be voraciously hungry for any information related to it? The more realistic prospect is that a company’s employees don’t behave much differently at work where information is concerned than they do in their personal lives. They “tune in” to information that’s immediately relevant to them, that peaks their interest, and/or that’s presented in a visually engaging way. That currently makes an internal social platform the most ideal way to communicate within the organization. It not only facilitates more immediate, more targeted (and thus more relevant) messaging from the company out to employees, it sets a stage for employees to communicate with each other and efficiently get answers to questions from peers. It’s a collaboration tool on steroids. If you build such an internal social portal and you do it right, will employees use it? Considering social media has officially been declared more addictive than cigarettes, booze and sex…probably. But what does it mean to do an internal social platform “right”? The bar has been set pretty high. Your employees are used to Twitter and Facebook, and would roll their eyes at anything less simple or harder to navigate than those. All the Facebook best practices would apply to your internal social as well, including the importance of managing posting frequency, using photos and video, moderation & response, etc. And don’t worry, you won’t be the first to jump in. WPP's global digital agency Possible has its own social network called Colab. Nestle has “The Nest.” Red Robin’s got one. I myself got an in-depth look at McGraw-Hill’s internal social platform at Blogwell NYC. Some of these companies are building their own platforms, others are buying them off the shelf or customizing readymade solutions. But you won’t be the last either. Prescient Digital Media and the IABC learned 39% of companies don’t offer employees any social tools. Not a social network, not discussion forums, not even IM. And a great many continue to ban the use of Facebook and Twitter on the premises. That’s pretty astonishing since social has become as essential a modern day communications tool as the telephone. But such holdouts will pay a big price for being mired in fear while competitors exploit social connections unchallenged. Fish where the fish are. If social has become the way people communicate and take in information, let that be the way communication is trafficked in the organization.

  Read the article

• How can I work efficiently on a desktop sharing workflow?

  - by OSdave

  I am a freelance Magento developer, based in Spain. One of my clients is a Germany based web development company and they're asking me something I think it's impossible. OK, maybe not impossible but definitely not a preferred way of doing things. One of their clients has a Magento Entreprise installation, which is the paid (and I think proprietary) version of Magento. Their client has forbidden them to download the files from his server. My client is asking me now to study one particular module of the application in order to interact with it from a custom module I'll have to develop. As they have a read-only ssh access to their client's server, they came up with this solution: Set up a desktop/screen sharing session between one of their developer's station and mine, alongsides with a skype conversation. Their idea is that I'll say to the developer: show me file foo.php The developer will then open this foo.php file in his IDE. I'll have then to ask him to show me the bar method, the parent class, etc... Remember that it's a read-only session, so forget about putting a Zend_Debug::log() anywhere, and don't even think about a xDebug breakpoint (they don't use any kind of debugger, sic). Their client has also forbidden them to use any version control system... My first reaction when they explained to me this was (and I actually did say it outloud to them): Well, find another client. but they took it as a joke from me. I understand that in a business point of view rejecting a client is not a good practice, but I think that the condition of this assignment make it impossible to complete. At least according to my workflow. I mean, the way I work or learn a new framework/program is: download all files and copy of db on my pc create a git repository and a branch run the application locally use breakpoints use Zend_Debug::log() write the code and tests commit to git repo upload to (test/staging first if there is one, production if not) server I have agreed to try the desktop sharing session, although I think it will be a waste of time. On one hand I don't mind, they pay me for that time, but I know me and I don't like the sensation of loosing my time. On the other hand, I have other clients for whom I can work according to my workflow. I am about to say to them that I cannot (don't want to) do it. Well, I'll first try this desktop sharing session: maybe I'm wrong and it can actually work. But I like to consider myself as a professional, and I know that I don't know everything. So I try to keep an open mind and I am always willing to learn new stuff. So my questions are: Can this desktop-sharing workflow work? What should be done in order to take the most of it? Taking into account all the obstacles (geographic locations, no local, no git), is there another way for me to work on that project?

  Read the article

• Why is the framerate (fps) capped at 60?

  - by dennmat

  ISSUE I recently moved a project from my laptop to my desktop(machine info below). On my laptop the exact same code displays the fps(and ms/f) correctly. On my desktop it does not. What I mean by this is on the laptop it will display 300 fps(for example) where on my desktop it will show only up to 60. If I add 100 objects to the game on the laptop I'll see my frame rate drop accordingly; the same test on the desktop results in no change and the frames stay at 60. It takes a lot(~300) entities before I'll see a frame drop on the desktop, then it will descend. It seems as though its "theoretical" frames would be 400 or 500 but will never actually get to that and only do 60 until there's too much to handle at 60. This 60 frame cap is coming from no where. I'm not doing any frame limiting myself. It seems like something external is limiting my loop iterations on the desktop, but for the last couple days I've been scratching my head trying to figure out how to debug this. SETUPS Desktop: Visual Studio Express 2012 Windows 7 Ultimate 64-bit Laptop: Visual Studio Express 2010 Windows 7 Ultimate 64-bit The libraries(allegro, box2d) are the same versions on both setups. CODE Main Loop: while(!abort) { frameTime = al_get_time(); if (frameTime - lastTime >= 1.0) { lastFps = fps/(frameTime - lastTime); lastTime = frameTime; avgMspf = cumMspf/fps; cumMspf = 0.0; fps = 0; } /** DRAWING/UPDATE CODE **/ fps++; cumMspf += al_get_time() - frameTime; } Note: There is no blocking code in the loop at any point. Where I'm at My understanding of al_get_time() is that it can return different resolutions depending on the system. However the resolution is never worse than seconds, and the double is represented as [seconds].[finer-resolution] and seeing as I'm only checking for a whole second al_get_time() shouldn't be responsible. My project settings and compiler options are the same. And I promise its the same code on both machines. My googling really didn't help me much, and although technically it's not that big of a deal. I'd really like to figure this out or perhaps have it explained, whichever comes first. Even just an idea of how to go about figuring out possible causes, because I'm out of ideas. Any help at all is greatly appreciated. EDIT: Thanks All. For any others that find this to disable vSync(windows only) in opengl: First get "wglext.h". It's all over the web. Then you can use a tool like GLee or just write your own quick extensions manager like: bool WGLExtensionSupported(const char *extension_name) { PFNWGLGETEXTENSIONSSTRINGEXTPROC _wglGetExtensionsStringEXT = NULL; _wglGetExtensionsStringEXT = (PFNWGLGETEXTENSIONSSTRINGEXTPROC) wglGetProcAddress("wglGetExtensionsStringEXT"); if (strstr(_wglGetExtensionsStringEXT(), extension_name) == NULL) { return false; } return true; } and then create and setup your function pointers: PFNWGLSWAPINTERVALEXTPROC wglSwapIntervalEXT = NULL; PFNWGLGETSWAPINTERVALEXTPROC wglGetSwapIntervalEXT = NULL; if (WGLExtensionSupported("WGL_EXT_swap_control")) { // Extension is supported, init pointers. wglSwapIntervalEXT = (PFNWGLSWAPINTERVALEXTPROC) wglGetProcAddress("wglSwapIntervalEXT"); // this is another function from WGL_EXT_swap_control extension wglGetSwapIntervalEXT = (PFNWGLGETSWAPINTERVALEXTPROC) wglGetProcAddress("wglGetSwapIntervalEXT"); } Then just call wglSwapIntervalEXT(0) to disable vSync and 1 to enable vSync. I found the reason this is windows only is that openGl actually doesn't deal with anything other than rendering it leaves the rest up to the OS and Hardware. Thanks everyone saved me a lot of time!

  Read the article

• SSI: Failed String Comparison with CGI Environment Variable [migrated]

  - by Calyo Delphi

  I am currently working on developing a personal website. It's not my first time doing this, but this is my first major foray into implementing SSI. I've run myself into a wall, however, with an if-else directive that uses one of the CGI environment variables as part of its comparison. Even after some limited attempts at debugging, all of the output and documentation that I have means that the comparisons being made should fail outright. This is not the case, and the wrong evaluation is being made by the if-else directive. Here's the code in the file index.shtml: <head> <!--#set var="page" value="Home" --> <!--#include file="headlinks.shtml" --> <style> img#ref { float: right; margin-left: 8px; border-width: 0px; } </style> </head> Here's the code in the file headlinks.shtml: <title><!--#echo var="page" --> &ndash; <!--#echo var="HTTP_HOST" --></title> <!--#set var="docroot" value="${DOCUMENT_ROOT}" --> <!--#echo var="docroot" --> <!--#if expr="( $docroot != '/Applications/MAMP/htdocs' ) || ( $docroot != '/home/dragarch/public_html' )" --> <link rel="stylesheet" type="text/css" href="../style.css"> <link rel="shortcut icon" type="image/svg+xml" href="../favicon.svg" /> <!--#else --> <link rel="stylesheet" type="text/css" href="style.css"> <link rel="shortcut icon" type="image/svg+xml" href="favicon.svg" /> <!--#endif --> And here's the output for the file index.shtml: <title>Home &ndash; dragarch</title> /Applications/MAMP/htdocs <link rel="stylesheet" type="text/css" href="../style.css"> <link rel="shortcut icon" type="image/svg+xml" href="../favicon.svg" /> Both style.css and favicon.svg are in the document root with index.shtml, so the if directive should fail and default to the output of the else directive. As you can see, while the document root (which is currently the MAMP htdocs folder on my own notebook) is correct according to the output of the echo directive, the comparison in the if-else directive fails to compare the strings properly. I'm using this page for my documentation: http://httpd.apache.org/docs/2.2/mod/mod_include.html I'm at a complete loss as to why this is the case, and need a bit of help here. EDIT: I should note that dragarch is a hostname that I configured in /etc/hosts to point to 127.0.0.1 so I could test the site without having to use localhost. It has no real effect on the functionality of anything, other than to just act as a prettier hostname to use.

  Read the article

• Understanding the Value of SOA

  - by Mala Narasimharajan

  Written By: Debra Lilley, ACE Director, Fusion Applications Again I want to talk from my area of expertise of Fusion Applications and talk about their design fundamentals. If you look at the table below and start at the bottom Oracle have defined all of the business objects e.g. accounts, people, customers, invoices etc. used by Fusion Applications; each of these objects contain all of the information required and can be expanded if necessary.  That Oracle have created for each of these business objects every action that is needed for the applications e.g. all the actions to create a new customer, checking to see if it exists, credit checking with D&B (Dun & Bradstreet < http://www.dnb.co.uk/> ) , creating the record, notifying those required etc. Each of these actions is a stand-alone web service. Again you can create a new actions or subscribe to an external provided web service e.g. the D&B check. The diagram also shows that all of development of Fusion Applications is from their Fusion Middleware offerings. Then the Intelligent Business Process is the order in which you run these actions, this is Service Orientated Architecture, SOA. Not only is SOA used to orchestrate actions within Fusion Applications it is also used in the integration of Fusion Applications with the rest of the Oracle stable of applications such as EBS, PeopleSoft, JDE and Siebel. The other applications are written with propriety development tools so how do they work with SOA? It’s a very simple answer, with the introduction of the Oracle SOA platform each process within these applications was made available to be called as a web service. I won’t go into technically how that is done but what’s known as a wrapper to allow each of them to act in this way was added. Finally at the top of the diagram are the questions that each Fusion Application process must answer, and this is the ‘special’ sauce that makes them so good, the User Experience, but that is a topic for another day, or you can read about it in my blog http://debrasoracle.blogspot.co.uk/2014/04/going-on-record-about-fusion-apps-cloud.html or Oracle’s own UX blog https://blogs.oracle.com/usableapps/ The concept behind AppAdvantage is not new the idea that Oracle technology can add value to your Oracle applications investments is pretty fundamental. Nishit Rao who is in AppAdvantage team provided myself and other ACE Directors with demo kits so that we could demonstrate SOA running with the applications. The example I learnt to build was that of the EBS inventory open interface. The simple concept is that request records can be added to a table and an import run that creates these as transactions in inventory. What’s SOA allows you to do is to add to the table from any source and then run this process automatically whereas traditionally you had to run the process at regular intervals because you didn’t know if the table was empty or not. This may just sound like a different way of doing the same thing but if the process is critical for your business then the interval was very small and the process run potentially many times unnecessarily. Using SOA it only happened when necessary without any delay. So in my post today I’ve talked about how SOA is used with Fusion Applications and in the linking with more traditional applications but that is only the tip of the iceberg of potential, your applications are just part of your IT systems and SOA can orchestrate your data across all of them; the beauty of open standards.  Debra Lilley, Fusion Champion, UKOUG Board Member, Fusion User Experience Advocate and ACE Director.  Lilley has 18 years experience with Oracle Applications, with E Business Suite since 9.4.1, moving to Business Intelligence Team Lead and Oracle Alliance Director. She has spoken at over 100 conferences worldwide and posts at debrasoraclethoughts

  Read the article

• Making user input/math on data fast, unlike excel type programs

  - by proGrammar

  I'm creating a research platform solely for myself to do some research on data. Programs like excel are terribly slow for me so I'm trying to come up with another solution. Originally I used excel. A1 was the cell that contained the data and all other cells in use calculated something on A1, or on other cells, that all could be in the end traced to A1. A1 was like an element of an array, I then I incremented it to go through all my data. This was way too slow. So the only other option I found originally was to hand code in c# the calculations inside a loop. Then I simply recompiled each time I changed my math. This was terribly slow to do and I had to order everything correctly so things would update correctly (dependencies). I could have also used events, but hand coding events for each cell like calculation would also be very slow. Next I created an application to read Excel and to perfectly imitate it. Which is what I now use. Basically I write formulas onto a fraction of my data to get live results inside excel. Then my program reads excel, writes another c# program, compiles it, and runs that program which runs my excel created formulas through a lot more data a whole lot faster. The advantage being my application dependency sorts everything (or I could use events) so I don't have to (like excel does) And of course the speed. But now its not a single application anymore. Instead its 2 applications, one which only reads my formulas and writes another program. The other one being the result which only lives for a short while before I do other runs through my data with different formulas / settings. So I can't see multiple results at one time without introducing even more programs like a database or at least having the 2 applications talking to each other. My idea was to have a dll that would be written, compiled, loaded, and unloaded again and again. So a self-updating program, sort of. But apparently that's not possible without another appdomain which means data has to be marshaled to be moved between the appdomains. Which would slow things down, not for summaries, but for other stuff I need to do with all my data. I'm also forgetting to mention a huge problem with restarting an application again and again which is having to reload ALL my data into memory again and again. But its still a whole lot faster than excel. I'm really super puzzled as to what people do when they want to research data fast. I'm completely unable to have a program accept user input and having it fast. My understanding is that it would have to do things like excel which is to evaluate strings again and again. So my only option is to repeatedly compile applications. Do I have a correct understanding on computer science? I've only just began programming, and didn't think I would have to learn much to do some simple math on data. My understanding is its either compiling my user defined stuff to a program or evaluating them from a string or something stupid again and again. And my only option is to probably switch operating systems or something to be able to have a program compile and run itself without stopping (writing/compiling dll, loading dll to program, unloading, and repeating). Can someone give me some idea on how computers work? Is anything better possible? Like a running program, that can accept user input and compile it and then unload it later? I mean heck operating systems dont need to be RESTARTED with every change to user input. What is this the cave man days? Sorry, it's just so super frustrating not knowing what one can do, and can't do. If only I could understand and learn this stuff fast enough.

  Read the article

• I am not satisfied with my career and accomplished nothing in my life. what should I do now [on hold]

  - by user2906155

  After my complete my College education I got chance to work on software programming. I work on few software and now nothing make me feel good. I don't like web-programming. Can't have too much mind to play with other people in team a designer or a senior. it's totally time wasting for me. We do integration without any source code control. copy through pen drive. I write in too many language for web-programming but know nothing about any language specially. I don't like to have a BOSS. I would like to do something on my own. From last 3 year I thing I will got a better job but I am unable to get it. I am not good at Programming nor my English is native. I have a big list for pay then my salary. I have problem with nothing. my atmosphere is about illiterate people. they abuse 24 hours a day. this thing make me sick. people watch CRIME patrol my home (watching rape in TV because it's happen to someone). I do my work from home. I don't like to live in my state. All state is one of the biggest illiterate state of my country. Once I apply for a Job in China and it's look like I can get thing Job but I don't get it. My family doesn't want me to settle anywhere else. I told my family 4 time a day that I can't live in this worst situation. Everyone (including the person who I work for) tell me that you can do it only you have money. Now I really don't know how to make money. My job not allow me to work for anyone. My productivity going down since I don't learn anything new. I thing if this happen to me for next 2 year I don't have any knowledge more then a peon. I hate it. When I was in other city then I see that if I spent 7 days their all my 7 days going better. even I go for travelling in green places then I like it. but all I hate it where I work for. When I work on other city then I see my productivity are improved and I don't hate my work. I listen a song "If you don't your love what are you doing it for". I seriously don' t know what I still live here because this place gave me nothing but depression and trouble. for people I clear that I don't belong to RICH or middle class family. All I got is doing something on my own or help of someone. affording a rental place make my run on footpath. All I save in one month is just 10$ (approximately) (actually I afford some guys's education now). Can a programmer live worst life like this. I really not happy. Today is a festival in India and I don't celebrate it because I really hate myself. I want to do suicide. someone guide me how to start solving this headache

  Read the article

• A programmer who doesn't get to program - where to turn? [closed]

  - by Just an Anon

  I'm in my mid 20's, and have been working as a full time programmer / developer for the last ~6 years, with several years of part-time freelancing before this, and three straight years of freelancing in the middle of this short career. I work mostly with PHP and the Drupal framework. By and large, I focus on programming custom pieces of functionality; these, of course, vary greatly from project to project. I've got years of solid experience with OOP (have done some Java & C# years ago, too) including intensive experience with front-end development, and even some design work. I've lead small teams (2-4 people) of developers. And of course, given the large amount of freelancing, I've got decent project- & client-management skills. My problem is staying motivated at any place of employment. In the time mentioned I've worked (full-time) at six local companies. The longest I've stayed at any company was just over a year. I find that I'll get hired and be very excited and motivated for the first few months, but the work quickly gets "stale." By that I mean that the interesting components (ie. the programming) get done, and the rest of the work turns into boring cleanup (move a button, add text, change colours, add a field). I don't get challenged, and I don't feel like I'm learning anything new. This happens repeatedly time and time again, and I always end up leaving for either a new opportunity, or to freelance. I'm wondering if perhaps I've painted myself into a corner with the rather niche work market (although with very high demand and good compensation) and need to explore other career choices. Another possibility is that I may be choosing the wrong places of employment, mostly small agencies, and need to look into working for a larger, more established firm. I find programming, writing code, and architecting solutions very rewarding. When I'm working on an interesting problem I lose all sense of time and 14-16 hours can fly by like minutes. I get the same exciting feeling when I'm doing high-level planning of a complex system, breaking up the work and figuring out how everything will tie-in together. I absolutely hate doing small, "stupid" changes that pose no challenge, yet seem to make up more and more of my work. I want to find a workplace where I will get to work on such tasks, be challenged, and improve in all areas of product development. This maybe a programming job, management, architecture of desktop apps, or may be managing a taco stand on a beach in Mexico - I don't know, and I need some advice and real-world feedback. What are some job areas worth exploring? The requirements are fairly simple: working with computers interacting with others challenging decent pay (I'm making just short of 90k / year with a month of vacation & some benefits, and would like to stay in this range, but am willing to take a temporary cut in pay for a more interesting position) Any advice would be much appreciated!

  Read the article

• Best way to process a queue in C# (PDF treatment)

  - by Bartdude

  First of all let me expose what I would like to do : I already dispose of a long-time running webapp developed in ASP.NET (C#) 2.0. In this app, users can upload standard PDF files (text+pics). The app is running in production on a Windows Server 2003 and has a dedicated database server (SQL server 2008) also running Windows Server 2003. I myself am a quite experienced web developer, but never actually programmed anything non-web (or at least nothing serious). I plan on adding a functionality to the webapp for which I would need a jpg snapshot of each page of the PDF. Creating these "thumbnails" isn't the big deal as such, I already do it inside my webapp using ghostscript. I've only done it on 1 page documents for now though, and the new functionality will need to process bigger documents. In order for this process to be transparent aswell for the admins as the final users, I would like to implement some kind of queue to delay the processing of the thumbnails. There again, no problem to create the queue, it will consist of records in a table, with enough info to find the pdf document back. Then I will need to process this queue, and that's were my interrogations start. Obviously the best solution to process it isn't an ASP script or so, so I will have to get out of my known environment. No problem, but I have no idea which direction to go. Therefore, a few questions : What should I develop ? I presumably need something that is "standby" on the server, runs when needed, then returns to idle state until further notice.Should I be looking into Windows service ? Is there another more appropriate type of project ? Depending on the first answer, what will be the approach ? Should I have somehow SQL server "tell" the program/service/... to process the queue, or should I have that program/service/... periodically check the state of the queue and treat new items. In both case, which functionality can I use ? we're not talking about hundreds of PDF a day (max 50 maybe), I can totally afford to treat the queue 1 item at a time. Can you confirm I don't have to look much further on threads and so ? (I found a lot of answers talking about threads in queue treatment, but it looks quite overkill for my needs) Maybe linked to the previous question : what about concurrent call to the program, whatever it is ? Let's suppose it is currently running, and a new record comes in the queue, what should be the behaviour ? I don't need much detailed answers and would already be happy with answers like "You can do the processing with a service, and yes it's possible to have sqlserver on machine A trigger a service start on machine B" or "You have to develop xxx and then use the scheduler to run it every xxx minutes". I don't mind reading articles and so, but I can hardly afford to spend too much time learning stuff to finally realize I went the wrong way for this project, so basically I'm trying to narrow down the scope of matters I need to investigate. Thanks for reading me, I hope I'll find some helping hands on here :-)

  Read the article

• Why is 0 false?

  - by Morwenn

  This question may sound dumb, but why does 0 evaluates to false and any other [integer] value to true is most of programming languages? String comparison Since the question seems a little bit too simple, I will explain myself a little bit more: first of all, it may seem evident to any programmer, but why wouldn't there be a programming language - there may actually be, but not any I used - where 0 evaluates to true and all the other [integer] values to false? That one remark may seem random, but I have a few examples where it may have been a good idea. First of all, let's take the example of strings three-way comparison, I will take C's strcmp as example: any programmer trying C as his first language may be tempted to write the following code: if (strcmp(str1, str2)) { // Do something... } Since strcmp returns 0 which evaluates to false when the strings are equal, what the beginning programmer tried to do fails miserably and he generally does not understand why at first. Had 0 evaluated to true instead, this function could have been used in its most simple expression - the one above - when comparing for equality, and the proper checks for -1 and 1 would have been done only when needed. We would have considered the return type as bool (in our minds I mean) most of the time. Moreover, let's introduce a new type, sign, that just takes values -1, 0 and 1. That can be pretty handy. Imagine there is a spaceship operator in C++ and we want it for std::string (well, there already is the compare function, but spaceship operator is more fun). The declaration would currently be the following one: sign operator<=>(const std::string& lhs, const std::string& rhs); Had 0 been evaluated to true, the spaceship operator wouldn't even exist, and we could have declared operator== that way: sign operator==(const std::string& lhs, const std::string& rhs); This operator== would have handled three-way comparison at once, and could still be used to perform the following check while still being able to check which string is lexicographically superior to the other when needed: if (str1 == str2) { // Do something... } Old errors handling We now have exceptions, so this part only applies to the old languages where no such thing exist (C for example). If we look at C's standard library (and POSIX one too), we can see for sure that maaaaany functions return 0 when successful and any integer otherwise. I have sadly seen some people do this kind of things: #define TRUE 0 // ... if (some_function() == TRUE) { // Here, TRUE would mean success... // Do something } If we think about how we think in programming, we often have the following reasoning pattern: Do something Did it work? Yes -> That's ok, one case to handle No -> Why? Many cases to handle If we think about it again, it would have made sense to put the only neutral value, 0, to yes (and that's how C's functions work), while all the other values can be there to solve the many cases of the no. However, in all the programming languages I know (except maybe some experimental esotheric languages), that yes evaluates to false in an if condition, while all the no cases evaluate to true. There are many situations when "it works" represents one case while "it does not work" represents many probable causes. If we think about it that way, having 0 evaluate to true and the rest to false would have made much more sense. Conclusion My conclusion is essentially my original question: why did we design languages where 0 is false and the other values are true, taking in account my few examples above and maybe some more I did not think of? Follow-up: It's nice to see there are many answers with many ideas and as many possible reasons for it to be like that. I love how passionate you seem to be about it. I originaly asked this question out of boredom, but since you seem so passionate, I decided to go a little further and ask about the rationale behind the Boolean choice for 0 and 1 on Math.SE :)

  Read the article

• SCVMM 2012 R2 - Installing Virtual Switch Fails with Error 2916

  - by Brian M.

  So I've been attempting to teach myself SCVMM 2012 and Hyper-V Server 2012 R2, and I seem to have hit a snag. I've connected my Hyper-V Host to SCVMM 2012 successfully, and created a logical network, logical switch, and uplink port profile (which I essentially blew through with the default settings). However when I attempt to create a virtual switch on my Hyper-V host, I run into an issue. The job will use my logical network settings I created to configure the virtual switch, but when it tries to apply it to the host, it stalls and eventually fails with the following error: Error (2916) VMM is unable to complete the request. The connection to the agent vmhost1.test.loc was lost. WinRM: URL: [h**p://vmhost1.test.loc:5985], Verb: [GET], Resource: [h**p://schemas.microsoft.com/wbem/wsman/1/wmi/root/virtualization/v2/Msvm_ConcreteJob?InstanceID=2F401A71-14A2-4636-9B3E-10C0EE942D33] Unknown error (0x80338126) Recommended Action Ensure that the Windows Remote Management (WinRM) service and the VMM agent are installed and running and that a firewall is not blocking HTTP/HTTPS traffic. Ensure that VMM server is able to communicate with econ-hyperv2.econ.loc over WinRM by successfully running the following command: winrm id –r:vmhost1.test.loc This problem can also be caused by a Windows Management Instrumentation (WMI) service crash. If the server is running Windows Server 2008 R2, ensure that KB 982293 (h**p://support.microsoft.com/kb/982293) is installed on it. If the error persists, restart vmhost1.test.loc and then try the operation again. Refer to h**p://support.microsoft.com/kb/2742275 for more details. I restarted the server, and upon booting am greeted with a message stating "No active network adapters found." I load up powershell and run "Get-NetAdapter -IncludeHidden" to see what's going on, and get the following: Name InterfaceDescription ifIndex Status ---- -------------------- ------- ----- Local Area Connection* 5 WAN Miniport (PPPOE) 6 Di... Ethernet Microsoft Hyper-V Network Switch Def... 10 Local Area Connection* 1 WAN Miniport (L2TP) 2 Di... Local Area Connection* 8 WAN Miniport (Network Monitor) 9 Up Local Area Connection* 4 WAN Miniport (PPTP) 5 Di... Ethernet 2 Broadcom NetXtreme Gigabit Ethernet 13 Up Local Area Connection* 7 WAN Miniport (IPv6) 8 Up Local Area Connection* 9 Microsoft Kernel Debug Network Adapter 11 No... Local Area Connection* 3 WAN Miniport (IKEv2) 4 Di... Local Area Connection* 2 WAN Miniport (SSTP) 3 Di... vSwitch (TEST Test Swi... Hyper-V Virtual Switch Extension Ada... 17 Up Local Area Connection* 6 WAN Miniport (IP) 7 Up Now the machine is no longer visible on the network, and I don't have the slightest idea what went wrong, and more importantly how to undo the damage I caused in order to get back to where I was (save for re-installing Hyper-V Server, but I really would rather know what's going on and how to fix it)! Does anybody have any ideas? Much appreciated!

  Read the article

• Watchguard Firewall - Issues with SSLVPN

  - by David W

  I have a client who has a WatchGuard XTM 23 device on site as their primary firewall. I just upgraded its firmware a couple days ago to the latest version for that series, 11.6.6. The problem is that I haven't successfully been able to setup a VPN connection for them. Using the instructions at http://www.watchguard.com/help/docs/webui/11_XTM/en-US/index.html#en-US/mvpn/ssl/configure_fb_for_mvpn_ssl_c.html, I'm trying to setup a VPN with SSL connection: From the firewall web GUI / Dashboard, I go to VPN - Mobile VPN with SSL, I enable it, add the organization's public IP address to which the firewall is connected. I've setup a group in Active Directory named "SSLVPN-Users", verified that the WatchGuard box can talk to the Active Directory Server, and added myself to that group. I then downloaded the WatchGuard Mobile VPN with SSL client onto my own Windows 7 machine, walked to the client's 2nd building across the street (which has a different public internet connection), and tried to connect to the VPN. When I do try to connect with the client, I get the following errors: 2013-06-24T15:41:32.119 Launching WatchGuard Mobile VPN with SSL client. Version 11.6.0 (Build 343814) Built:Jun 13 2012 01:42:55 2013-06-24T15:41:37.595 Requesting client configuration from 184.174.143.176:443 2013-06-24T15:41:50.106 FAILED:Cannot perform http request, timeout 12002 2013-06-24T15:41:50.106 failed to get domain name I discovered today the Firebox System Manager, and its "Traffic Monitor" which gives current log information (refreshes every 5 seconds). Unfortunately, it doesn't look like the client has setup any sort of WatchGuard / Firebox logging server, so actually recording server-side logs to file hasn't been done. I can work on implementing that if I need to. I noticed that if I try to ping the client's public IP address from an outside source, I don't get a response back (unless I added a policy into the firewall to allow ICMP traffic from "External", which I successfully did a few seconds ago for testing purposes - that rule has since been reverted to not respond to external ping requests). There's a policy in the firewall for allowing SSLVPN Traffic authentication requests coming from any external source TO the Firebox, and then to do the authentication / actually allow the VPN traffic, there's a policy allowing traffic for anyone in the SSLVPN-Users group to flow between that user and the inside network. So my questions are: Has anyone seen these errors before from the Watchguard VPN Client, and/or do you have any suggestions on how I can resolve that error? If I need to setup logging server to grab the firewall logs (in order to further troubleshoot this issue), how complicated a task is that and does it require a lot of system resources? The organization I'm consulting with only has 1 server and not a lot of resources or technical know-how.

  Read the article

• Oracle Application Server Performance Monitoring and Tuning (CPU load high)

  - by Berkay

  Oracle Application Server Performance Monitoring and Tuning (CPU load high) i have just hired by a company and my boss give me a performance issue to solve as soon as possible. I don't have any experience with the Java EE before at the server side. Let me begin what i learned about the system and still couldn't find the solution: We have an Oracle Application Server (10.1.) and Oracle Database server (9.2.), the software guys wrote a kind of big J2EE project (X project) using specifically JSF 1.2 with Ajax which is only used in this project. They actively use PL/SQL in their code. So, we started the application server (Solaris machine), everything seems OK. users start using the app starting Monday from different locations (app 200 have user accounts,i just checked and see that the connection pool is set right, the session are active only 15 minutes). After sometime (2 days) CPU utilization gets high,%60, at night it is still same nothing changed (the online user amount is nearly 1 or 2 at this time), even it starts using the CPU allocated for other applications on the same server because they freed If we don't restart the server, the utilization becomes %90 following 2 days, application is so slow that end users starts calling. The main problem is software engineers say that code is clear, and the System and DBA managers say that we have the correct configuration,the other applications seems OK why this problem happens only for X application. I start copying the DB to a test platform and upgrade it to the latest version, also did in same with the application server (Weblogic) if there is a bug or not. i only tested by myself only one user and weblogic admin panel i can track the threads and dump them. i noticed that there are some threads showing as a hogging. when i checked the manuals and control the trace i see that it directs me the line number where PL/SQL code is called from a .java file. The software eng. says that yes we have really complex PL/SQL codes but what's the relation with Application server? this is the problem of DB server, i guess they're right... I know the question has many holes, i'd like to give more in detail but i appreciate the way you guide me. Thanks in advance ... Edit: The server both in CPU and Memory enough to run more complex applications

  Read the article

• Looking for definitive answer to accessing a network drive/NAS/SMB drive via Windows 7 HOME and Windows 7 Professional. Is it possible and how?

  - by Rob

  I want to be able to access my Lacie 2Big network drive in Windows 7 Explorer. I have a machine with Windows 7 Home and one with Windows 7 Professional. Neither Windows 7, home or pro, can access the drive. The Windows 7 Home machine displays the drive in its Explorer, with the capacity, but on clicking the icon, I get another window, blank with the busy pointer which does not eventually stop. The drive is working perfectly. How do I know this? Because I can access it with no problems on my Apple Mac, Windows XP home and Ubuntu machines on the same network as the Windows 7 machines. Except for the Windows XP home machine that required Lacie ethernet agent program, the Mac and the Ubuntu machines needed no setup, the drive appeared like any other drive. So my 2 questions: Is it possible to access a network share drive, e.g. a NAS like Lacie 2big in Windows 7 Home Premium and Windows 7 Professional. If so how? I read on Microsoft's own forums and elsewhere that network sharing drives, e.g. via SambaSMB is NOT possible on Windows 7 Home. Is this true? http://social.technet.microsoft.com/Forums/en-US/w7itprovirt/thread/e08c3500-a722-4b44-b644-64f94f63c8e5/ This question is a more comprehensive re-write of my earlier question: Windows 7 / TCP/IP network share guide - looking for to resolve failure to mount lacie network drive but works on XP,Linux,Mac. ...where I haven't received a solving answer, and I have tried to find a solution myself. Lacie themselves haven't offered a definitive solving answer either, but I suspect it's not just their drives but SMB/network share/NAS in general... This is utterly pathetic that Windows 7 home cannot access something as simple as a network drive, especially given that Windows XP home can. My research so far: Apparently it is possible on Windows 7 Professional, via the Local Security Policy, only on Windows 7 Professional, not Windows 7 Home: http://www.sevenforums.com/tutorials/7357-local-security-policy-editor-open.html http://answers.microsoft.com/en-us/windows/forum/windows_7-security/accessing-local-security-policy-in-windows-7-home/0c8300d0-1d23-4de0-9b37-935c01a7d17a http://social.technet.microsoft.com/Forums/en-US/w7itprosecurity/thread/14fc5037-3386-4973-b5d8-2167272ff5ad/ http://www.tomshardware.com/forum/75-63-windows-samba-issue Another solution offered is editing the registry, doesn't look promising to me, fiddly and not guaranteed, hard to produce a complete solution I think, given that everyone's registry can vary. Registry key edit solutons: https://www.lacie.com/uk/mystuff/ticket/ticket.htm?tid=101278940 http://networksecurity.farzadbanifatemi.com/security-policy/how-to-access-local-security-policy-windows-7-home-premium Related: Does Windows 7 Home Premium support backing up to a network share Network Copy to Windows 7 File Share Fails and Kills Network Connection

  Read the article

• How to change radius of rounded rectangle in Photoshop

  - by MattDiPasquale

  At this point, I'm thinking of just using CSS 3, esp. since I'm a programmer, but I'd like to do this with Photoshop because I think it's nicer since I'm working with images anyway, among other reasons... Before I move on, my first question is: Is there a place like SuperUser for designers (or for Photoshop-like or questions)? What I Want: I want the icons on http://www.mattdipasquale.com/ to look like those on http://about.me/mattdipasquale. About.me has an outdated Twitter icon and does not have icons for GitHub, StackOverflow, etc. So, although I like the look of their icons, I want to be able to create these icons myself instead of using their versions. What I Have: I have different iphone icons, like the Facebook iPhone icon, Twitter iPhone icon, etc., that I got from iTunes, using Firebug to find the URL of the background image. I opened them up in Photoshop and pressed option + command + i to reduce the image size to 32px x 32px with Bicubic Sharper (best for reduction). I now have a square icon layer. Closing the Gap: In addition to the icon layer, I want to have a clipping-mask layer that will apply the 5px rounded-corners, 1px stroke, and 1px bevel. (Note: I just want to apply effects to the edges of the icon because the gloss and other effects are already encoded in the iTunes image. Also, I'm just guessing about the pixel values, but I want it to look good, like the icons on about.me.) What settings should I use for the blend options to make the icons look good, like iphone icons or those used by about.me? Why a Clipping Mask? The reason I want to use a clipping mask is that I want ease of reproducibility. I want to be able to apply the same styling to other square icon layers by simply replacing the square icon layer and then saving for web. If there is a better way to achieve such ease of reproducibility, please suggest it. I've seen Photoshop iPhone icon templates, but I couldn't figure out how to use them with my own images. Thanks! Matt

  Read the article

• Why can I not get a WDS-originated PXE boot to progress past the first file download?

  - by Jeff Shattock

  I'm trying to work out an automated Windows install process, and thought I'd give WDS a look. After some promising initial progress, I seem to have hit a wall. I imported the boot and install WIMs, and created the capture WIM successfully. However, whenever I try to PXE boot the reference machine against the WDS server, it kinda craps out. It finds the server and downloads WDSNBP.COM successfully, and then gives the message "TFTP download failed." According to WireShark, the only communication between the WDS box and the client box is the successful TFTP request and download of boot\x86\WDSNBP.COM. No further requests are sent. The WDS log on the server shows the same thing, one successful download and no more activity. I've tried every combination of the following, with exactly zero change in behaviour: Win Server 2008R2 vs 2012 vs 2012R2 WDS virtualized on KVM, ESXi, VirtualBox, VMWare Workstation Client virtualized on KVM, ESXi, VirtualBox, VMWare Workstation Every network adaptor type offered by the virtualization platforms. "Actual" network vs isolated, virtual network. MS DHCP server vs Linux isc-dhcp-server Joined to a domain vs Stand-alone I tried changing the boot filename in DHCP to pxeboot.com instead, and it has no problem downloading that file instead, but it then crabs about Boot\BCD being corrupted. Also, with 2012, it doesnt appear that WDSNBP.com does the architecture detection, or at least does'nt report that it did. 2008 reports that it found x64, and then errors. I find myself out of things to check, and I dont see anything immediately wrong. Where do I go from here? WDS server is at 192.168.1.50, DHCP/DNS at 192.168.1.7. Console of the client computer after the boot: MAC: 52:54:00:28:94:0E UUID: blah blah Searching for server (DHCP)..... Me: 192.168.1.155, DHCP: 192.168.1.7, Gateway 192.168.1.1 Loading 192.168.1.50:boot\x86\wdsnbp.com ...(PXE).................done Downloaded WDSNCP... TFPT download failed Interesting parts of /etc/dhcp/dhcpd.conf on the Linux DHCP server: allow booting; allow bootp; option option-60 code 60 = string; option option-66 code 66 = string; option option-67 code 67 = string; subnet 192.168.1.0 netmask 255.255.255.0 { range 192.168.1.110 192.168.1.253; next-server 192.168.1.50; option tftp-server-name "192.168.1.50"; option option-60 "PXEClient"; filename "boot\\x86\\wdsnbp.com"; option bootfile-name "boot\\x86\\wdsnbp.com"; }

  Read the article

< Previous Page | 232 233 234 235 236 237 238 239 240 241 242 243  | Next Page >