Search Results

Search found 6337 results on 254 pages for 'tips and tricks'.

Page 237/254 | < Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >

• Keeping track of dependency revisions

  - by Samaursa

  I have a project with several dependencies that are in various repositories. Each time I commit changes to my project, I make sure I write the revision numbers of all the dependent repositories so that in the event I ever have to come back to this revision (let's call it 5), I can immediately know which revisions of the dependent repositories revision 5 is guaranteed to work with, update the dependencies to the specified revisions, compile and run the project. So for example if I have: Dep1 @ Revisions 10 Dep2 @ Revisions 20 Dep3 @ Revisions 10 Proj @ Revisions 35 And let's say that when Proj was on revision 17, the Dep1 revision was 5, Dep2 revision was 13 and Dep3 revision was 3. So in my SVN logs, I recorded something like this: !! Works with Dep1 Rev 5, Dep2 Rev 13, Dep3 Rev 3 To me this seems primitive and makes me believe that there is a better way to do it. Now in one of my other questions, Ivy Dependency Manager has been recommended. I have not looked at it in detail yet (seems complicated and yet another thing I must learn). To me it seems like the log of SVN (and Mercurial etc.) could have been split into Log and Dependencies (if any) where the latter could be switched off if there were no dependencies (unless of course I am unaware of an easier/better solution). This would allow for a cleaner log that maybe even warned at each new commit to check the previously defined dependencies again and make sure they have not changed. So, I was wondering how everyone manages this situations and if you have any tips, techniques, programs, suggestions that you can offer. Thank you.

  Read the article

• What causes markup-controls to be null?

  - by Earlz

  Ok, I have a very strange problem. I have a regular UserControl with some controls in the markup. At Page_Load these controls are still null. And I have tried EnsureChildControls It is laid out like this: Masterpage - Page - mycontrol1 - mycontrol2 - problemcontrol ProblemControl is where the controls are null. MyControl1 contains MyControl2. MyControl2 is another UserControl which contains ProblemControl in it's markup. Masterpage is nothing special and Page contains MyControl1 in it's markup. The only oddity is that ProblemControl is created dynamically at Page_Init. Everything works fine until I get to ProblemControl where none of the controls are being created. ProblemControl has the proper things all set such as the Page and Parent property. I do not see any problems. The source code for all of these(except ProblemControl) is pretty extensive, so I'm hoping someone can just give me some troubleshooting tips for this problem and if anyone has encountered it before. Also, I can place ProblemControl on another Page control and it will work fine, it's something about mycontrol1 and/or mycontrol2. But we've never had any problems with mycontrol1 and mycontrol2 doesn't have anything I can see wrong with it. (which I've been tediously analyzing for the past few hours). Has anyone else had this same problem? Are there any common things to check for?

  Read the article

• Windows 2008 VPS hosting experiences

  - by Luke Bennett

  Whilst similar questions exist, I couldn't find any which quite match my request. I'm looking for hosting for some personal .NET projects which for various reasons I do not want to host on our servers at work. I need to be able to host multiple sites and for that reason I'm thinking of a VPS with RDP access for the time being - don't fancy shared hosting as I feel that doesn't offer me the flexbility and control I'm looking for. What experiences do people have of Windows 2008 VPS providers? I've come across a few possibilities although it seems a lot of places are still on Windows 2003 with 2008 'coming soon'. Is VPS the best way to go? Eventually (depending on how the projects take off) I intend to get a dedicated box but at this stage it's not cost-effective. Also, what are people's experiences of running SQL Server Express on a VPS? What would you say the minimum requirements are for CPU/memory? I know it's not going to be anywhere near as performant as SQL Server 2005/8 running on a dedicated box but I'm hoping it will be an acceptable starting point. Any other tips/advice also welcome! Edit: Forgot to mention, I'm ideally looking for UK hosting although I'm open to alternatives.

  Read the article

• how to connect to MSSQL using activerecord, JDBC, JTDS and Integrated Security

  - by Rob

  As per the above, I've tried: establish_connection(:adapter => "jdbcmssql", :url => "jdbc:jtds:sqlserver://myserver:1433/mydatabase;domain='mynetwork';", :username => 'user', :password=>'pass' ) establish_connection(:adapter => "jdbcmssql", :url => 'jdbc:jtds:sqlserver://myserver:1433/mydatabase;domain="mynetwork";user="mynetwork\user"' ) establish_connection(:adapter => "jdbcmssql", :url => "jdbc:jtds:sqlserver://myserver:1433/mydatabase;domain='mynetwork';", :username=>'user' ) establish_connection(:adapter => "jdbcmssql", :url => "jdbc:jtds:sqlserver://myserver:1433/mydatabase;domain='mynetwork';integratedSecurity='true'", :username=>'user' ) .. and various other combinations. Each time I get: net/sourceforge/jtds/jdbc/SQLDiagnostic.java:368:in `addDiagnostic': java.sql.SQLException: Login failed for user ''. The user is not associated with a trusted SQL Server connection. (NativeException) Any tips? Thanks, activerecord (2.3.5) activerecord-jdbc-adapter (0.9.6) activerecord-jdbcmssql-adapter (0.9.6) jdbc-jtds (1.2.5) jruby 1.4.0 (ruby 1.8.7 patchlevel 174) (2009-11-02 69fbfa3) (Java HotSpot(TM) Client VM 1.6.0_18) [x86-java]

  Read the article

• Emulating a computer running MS-DOS

  - by Richard

  Writing emulators has always fascinated me. Now I want to write an emulator for an IBM PC and run MS-DOS on it (I've got the floppy image files). I have good experience in C++ and C and basic knowledge of assembler and the architecture of a CPU. I also know that there are thousands of emulators out there doing exactly what I want to do, but I'd be doing this for pure joy only. How much work do I have to expect? (If my goal is to boot DOS and create a text file with it, all emulated) What CPU should I emulate ? Where can I find documentation on how the machine code is organized and which opcodes mean what, so I can unpack and execute them correctly with my emulator? Does MS-DOS still run on the newest generations of processors? Would it theoretically be able to natively run on a 64-bit AMD Phenom 2 processor w/ a modern mainboard, HDD, RAM, etc.? What else, besides emulating the CPU, could be an important factor (in terms of difficulty)? I would only aim for outputting / inputting text to the system via the host system's console, no sound or other more advanced IO etc. Have you written an emulator yet? What was your first one for? How hard was it? Do you have any special tips for me? Thanks in advance

  Read the article

• Building simple jQuery plugin, need assistance

  - by kirisu_kun

  Hi there, I'm building my first ever jQuery plugin (it's just a simple experiment). Here's what I have so far: (function($){ $.fn.extend({ auchieFader: function(options) { var defaults = { mask: '', topImg : '', } var options = $.extend(defaults, options); return this.each(function() { var o = options; var obj = $(this); var masker = $(o.mask, obj); masker.hover(function () { $(o.topImg).stop().animate({ "opacity": "0" }, "slow"); }, function () { $(o.topImg).stop().animate({ "opacity": "1" }, "slow"); }); }); } }); })(jQuery); I'm then calling the plugin using: $('.fader').auchieFader({mask: ".mask", topImg: ".top"}); If I then add another request say: $('.fader2').auchieFader({mask: ".mask", topImg: ".top"}); Then no matter what instance of my 2 faders I hover both of them will trigger. I know this is because my mask mask and topImg options have the same class - but how can I modify the plugin to allow for these items to have the same class? I know it's probably something really simple, but I'm still finding my way with jQuery and Javascript in general. Any other tips on improving my code would also be greatly appreciated! Cheers, Chris

  Read the article

• Information about PTE's (Page Table Entries) in Windows

  - by Patrick

  In order to find more easily buffer overflows I am changing our custom memory allocator so that it allocates a full 4KB page instead of only the wanted number of bytes. Then I change the page protection and size so that if the caller writes before or after its allocated piece of memory, the application immediately crashes. Problem is that although I have enough memory, the application never starts up completely because it runs out of memory. This has two causes: since every allocation needs 4 KB, we probably reach the 2 GB limit very soon. This problem could be solved if I would make a 64-bit executable (didn't try it yet). even when I only need a few hundreds of megabytes, the allocations fail at a certain moment. The second problem is the biggest one, and I think it's related to the maximum number of PTE's (page table entries, which store information on how Virtual Memory is mapped to physical memory, and whether pages should be read-only or not) you can have in a process. My questions (or a cry-for-tips): Where can I find information about the maximum number of PTE's in a process? Is this different (higher) for 64-bit systems/applications or not? Can the number of PTE's be configured in the application or in Windows? Thanks, Patrick PS. note for those who will try to argument that you shouldn't write your own memory manager: My application is rather specific so I really want full control over memory management (can't give any more details) Last week we had a memory overwrite which we couldn't find using the standard C++ allocator and the debugging functionality of the C/C++ run time (it only said "block corrupt" minutes after the actual corruption") We also tried standard Windows utilities (like GFLAGS, ...) but they slowed down the application by a factor of 100, and couldn't find the exact position of the overwrite either We also tried the "Full Page Heap" functionality of Application Verifier, but then the application doesn't start up either (probably also running out of PTE's)

  Read the article

• Toolbar to modify displayed html/content in IE / Firefox / Chrome.

  - by JP

  Hi, I want to create toolbar, whose functionality would be: Whenever the toolbar is "On/Activated", all pages should be parsed by a function, and the modified html should be displayed. [Example: i) There was this skype toolbar that would recognize phone-numbers in pages and automatically add skype links ii) If you have used MacAfee / Alexa toolbars, they modify the search results page displayed by Google My functionality would a lot simpler though] I want to create this for all browsers (though answers/pointers to any one platform would be appreciated). Please note that I am new to toolbar development, so detailed pointers from basics would be very helpful. I have heard to GreaseMonkey. However, if I can do it in a more "basic" way, it would be very helpful. (Alternately, tips to make a "custom" toolbar using GreaseMonkey would be welcome - though I would like to do away with ability to add scripts, etc. Also I installed greasemonkey and it does show up as a toolbar in FF/IE at all! In IE, there is separate executable to add scripts - I want a standalone toolbar with ON/OFF facility in the browser). Thanks much! Regards, JP

  Read the article

• REST Rails 2 nested routes without resource names?

  - by mrbrdo

  I'm using Rails 2. I have resources nested like this: - university_categories - universities - studies - professors - comments I wish to use RESTful routes, but I don't want all that clutter in my URL. For example instead of: /universities/:university_id/studies/:study_id/professors/:professor_id I want: /professors/:university_id/:study_id/:professor_id (I don't map professors seperately so there shouldn't be a confusion between this and /professors/:professor_id since that route shouldn't exist). Again, I want to use RESTful resources/routes... Also note, I am using slugs instead of IDs. Slugs for studies are NOT unique, while other are. Also, there are no many-to-many relationships (so if I know the slug of a professor, which is unique, I also know which study and university and category it belongs to, however I still wish this information to be in the URI if possible for SEO, and also it is necessary when adding a new professor). I do however want to use shallow nesting for "administrator" URIs like edit, destroy (note the problem here with Study since it's slug is not unique, though)... I would also like some tips on how to use the url helpers so that I don't have too much to fix if I change the routes in the future... Thank you.

  Read the article

• Do I lose the benefits of macro recording if I develop Excel apps in Visual Studio?

  - by DanM

  I've written lots of Excel macros in the past using the following development process: Record a macro. Open the VBA editor. Edit the macro. I'm now experimenting with a Visual Studio 2008 "Excel 2007 Add-In" project (C#), and I'm wondering if I will have to give up this development process. Questions: I know I can still record macros using Excel, but is there any way to access the resulting code in Visual Studio? Or do I just have to copy and paste then C#-ize it? What happens with my "Personal Macro Workbook"? Can I use the macros I have stored in there within C#? Or is there some way to convert them to C#? If there is some support for opening and editing VBA macros in Visual Studio, can you provide a very brief summary of how it works or point me to a good reference? Do you have any other tips for transitioning from writing macros in VBA using Excel's built-in editor to writing them in C# with Visual Studio?

  Read the article

• how to seamlessly integrate subversion and git?

  - by mattv

  I'm looking for tips on how to seamlessly integrate subversion and git, for deploying web sites by a small team of web developers. We each have our own development versions of our sites on our local machines. We also have dev, staging, and live servers. As our team has grown, we haven't updated our revision control and deployment strategies accordingly. We had all been checking into the trunk of a shared Subversion repository. Both the dev & staging servers ran from a checkout of the trunk, so updating them involved running "svn update" while the live server ran as an export from trunk which required an "svn export" to get the latest code. In either case, we would often update just certain files by updating or exporting just those files or directories. That worked okay when there was just one or two developers. However, a big downside was that we couldn't point to an individual tag that represented what was currently on live at any given time. In keeping with corporate policy, we'd like to continue to use Subversion to store what we're now calling our "production branch," which will be what goes onto staging and live. However, we would like to use Git on our local and development sites. We especially like the idea of easier merges and being able to "cherry pick" updates that need to go live. We had initially planned on using git-svn, but it doesn't seem to work well in a shared environment such as our dev or staging servers. Anyone else doing something like this? What's the best way to make it work? Or are we making it more difficult than it should be?

  Read the article

• Leftover Nav Bar in Landscape View

  - by Rob Bonner

  Hello, I am working to force a view into landscape mode, and have picked up all kinds of cool tips to make this happen, but am stuck on one item that is left on the screen. I have my XIB file laid out in landscape, and in my code I create the view controller normally: RedeemViewController *aViewController = [[RedeemViewController alloc] initWithNibName:@"RedeemViewController" bundle:nil]; aViewController.hidesBottomBarWhenPushed = YES; aViewController.wantsFullScreenLayout = YES; [[self navigationController] pushViewController:aViewController animated:YES]; Inside the controller viewDidLoad I complete the following: [[UIApplication sharedApplication] setStatusBarOrientation:UIInterfaceOrientationLandscapeRight]; [[self navigationController] setNavigationBarHidden:YES animated:YES]; [UIView beginAnimations:@"View Flip" context:nil]; [UIView setAnimationDuration:.75]; [UIView setAnimationCurve:UIViewAnimationCurveEaseInOut]; if (self.interfaceOrientation == UIInterfaceOrientationPortrait) { self.view.transform = CGAffineTransformIdentity; self.view.transform = CGAffineTransformMakeRotation(degreesToRadian(90)); self.view.bounds = CGRectMake(0.0, 0.0, 480, 320); } [UIView commitAnimations]; What I end up with is a perfectly rotated view, with a grey vertical bar on the left side (see pic). So to the question, how do I get rid of the bar? Edit: I am pretty sure this is the navigation bar that is not being hidden. This is a duplicate of another post, with some modified code, the other question was being answered with the bug.

  Read the article

• ASP.net MVC Linq-To-SQL Extended Class Field Binding

  - by user336858

  Hi there, The short version of this question is "Is there a way to get automatic View Object binding for fields defined in a partial class for a Linq-To-SQL generated class?" Apologies if it's been asked before. Example Suppose I have a typical MVC setup with the tables: Posts {PostID, ...} Categories {CategoryID, ...} A post can have more than one category, and a category can identify more than one post. Thus suppose further that I need an extra table: PostCategories {PostID, CategoryID, ...} This handles the many-to-many relationship between posts and categories. As far as I know, there's no way to do this in Linq-to-SQL right now so I have to shoehorn it in by adding a partial Postclass to the project to add that functionality. Something like: public partial class Post { public IEnumerable<Category> Categories{ get { ... } set { ... } } } So here's my question: If a user is accessing my MVC application front-end and begins editing a Post object, they might enter an invalid category. When the server recognizes the invalid input, the usual practice is to return the faulty object to the original view for re-editing along with some error messages. The fields in the edit page are re-populated with the provided values. However I don't know how to get this mechanism to work with the properties I created with the partial class as shown above. Any terminology, links, or tips you can provide would be tremendously helpful!

  Read the article

• python list Index out of range error

  - by dman762000

  I am working on a python tetris game that my proffessor assigned for the final project of a concepts of programming class. I have got just about everything he wanted to work on it at this point but I am having a slight problem with one part of it. Whenever I start moving pieces left and right I keep getting "index out of range error". This only happens when it is up against a piece. Here are the culprits that are giving me grief. def clearRight(block=None): global board, activeBlock, stackedBlocks isClear = True if(block == None): block = activeBlock if(block != None): for square in block['squares']: row = square[1] col = square[0]+1 if(col >= 0 and stackedBlocks[row][col] !=None): isClear=False return isClear def clearLeft(block=None): global board, activeBlock, stackedBlocks isClear = True if(block == None): block = activeBlock if(block != None): for square in block['squares']: row = square[1] col = square[0]-1 if(col >= 0 and stackedBlocks[row][col] !=None): isClear=False return isClear I am not looking to get anyone to fix it for me, I'm only looking for tips on how to fix it myself. Thanks in advance for any help that is given.

  Read the article

• load data from grid row into (pop up) form for editing

  - by user1495457

  I read in Ext JS in Action ( by J. Garcia) that if we have an instance of Ext.data.Record, we can use the form's loadRecord method to set the form's values. However, he does not give a working example of this (in the example that he uses data is loaded into a form through a file called data.php). I have searched many forums and found the following entry helpful as it gave me an idea on how to solve my problem by using form's loadRecord method: load data from grid to form Now the code for my store and grid is as follows: var userstore = Ext.create('Ext.data.Store', { storeId: 'viewUsersStore', model: 'Configs', autoLoad: true, proxy: { type: 'ajax', url: '/user/getuserviewdata.castle', reader: { type: 'json', root: 'users' }, listeners: { exception: function (proxy, response, operation, eOpts) { Ext.MessageBox.alert("Error", "Session has timed-out. Please re-login and try again."); } } } }); var grid = Ext.create('Ext.grid.Panel', { id: 'viewUsersGrid', title: 'List of all users', store: Ext.data.StoreManager.lookup('viewUsersStore'), columns: [ { header: 'Username', dataIndex: 'username' }, { header: 'Full Name', dataIndex: 'fullName' }, { header: 'Company', dataIndex: 'companyName' }, { header: 'Latest Time Login', dataIndex: 'lastLogin' }, { header: 'Current Status', dataIndex: 'status' }, { header: 'Edit', menuDisabled: true, sortable: false, xtype: 'actioncolumn', width: 50, items: [{ icon: '../../../Content/ext/img/icons/fam/user_edit.png', tooltip: 'Edit user', handler: function (grid, rowIndex, colIndex) { var rec = userstore.getAt(rowIndex); alert("Edit " + rec.get('username')+ "?"); EditUser(rec.get('id')); } }] }, ] }); function EditUser(id) { //I think I need to have this code here - I don't think it's complete/correct though var formpanel = Ext.getCmp('CreateUserForm'); formpanel.getForm().loadRecord(rec); } 'CreateUserForm' is the ID of a form that already exists and which should appear when user clicks on Edit icon. That pop-up form should then automatically be populated with the correct data from the grid row. However my code is not working. I get an error at the line 'formpanel.getForm().loadRecord(rec)' - it says 'Microsoft JScript runtime error: 'undefined' is null or not an object'. Any tips on how to solve this?

  Read the article

• Is there any way to make this JavaScript tab completion script more efficient?

  - by Saladin Akara

  This code is to be integrated into an AJAX Chat system to enable a tab auto-completion of user names: var usernames = new Array(); usernames[0] = "Saladin"; usernames[1] = "Jyllaby"; usernames[2] = "CadaverKindler"; usernames[3] = "qbsuperstar03"; var text = "Text and something else q"; // Start of the script to be imported var searchTerm = text.slice(text.lastIndexOf(" ") + 1); var i; for(i = 0; i < usernames.length && usernames[i].substr(0,searchTerm.length) != searchTerm; i++); // End of the script to be imported document.write(usernames[i]); A couple of notes to be made: The array of usernames and the text variable would both be loaded from the chat itself via AJAX (which, unfortunately, I don't know), and the final output will be handled by AJAX as well. Is there a more efficient way to do this? Also, any tips on how to handle multiple instances of the searchTerm being found?

  Read the article

• Boost Include Files in VC++

  - by Dr. K

  For the last few years, I have been exclusively a C# developer. Previously, I developed in C++ and have a C++ application that I built about 3 years ago using VS2005. It made extensive use of the Boost libraries. I recently decided to brush off the old app and rebuild it in VS2008 with the latest version of Boost (the latest version with the "easy" installation program from BoostPro Computing), 1.39. Previously when I had the program running I was at 1.33. Also, the last time the program was running was at least 2 OS installations ago. The Boost installation is located on my machine at: "C:\Program Files\boost\boost_1_39". Anyway, I have done the following: Set the project's "Additional Include Directories" directory to "C:\Program Files\boost\boost_1_39" Added "C:\Program Files\boost\boost_1_39" to VS2008's Tools - Options - Projects and Solutions - VC++ Directories - Include Files I have a number of Boost includes in my stdafx.h file. The compiler fails upon attempting to open the first one - #include <boost/algorithm/string/string.hpp> I have confirmed that the above file is indeed located at "C:\Program Files\boost\boost_1_39\boost\algorithm\string\string.hpp" I continue to get: fatal error C1083: Cannot open include file: 'boost/algorithm/string/string.hpp': No such file or directory Any tips on what else to check would be greatly appreciated. Again, this is an application that compiled fine a few years ago, but the source has now been moved to a new machine/compiler.

  Read the article

• Generics in a bidirectional association

  - by Verhoevenv

  Let's say I have two classes A and B, with B a subtype of A. This is only part of a richer type hierarchy, obviously, but I don't think that's relevant. Assume A is the root of the hierarchy. There is a collection class C that keeps track of a list of A's. However, I want to make C generic, so that it is possible to make an instance that only keeps B's and won't accept A's. class A(val c: C[A]) { c.addEntry(this) } class B(c: C[A]) extends A(c) class C[T <: A]{ val entries = new ArrayBuffer[T]() def addEntry(e: T) { entries += e } } object Generic { def main(args : Array[String]) { val c = new C[B]() new B(c) } } The code above obviously give the error 'type mismatch: found C[B], required C[A]' on the new B(c) line. I'm not sure how this can be fixed. It's not possible to make C covariant in T (like C[+T <: A]) because the ArrayBuffer is non-variantly typed in T. It's not possible to make the constructor of B require a C[B] because C can't be covariant. Am I barking up the wrong tree here? I'm a complete Scala newbie, so any ideas and tips might be helpful. Thank you! EDIT: Basically, what I'd like to have is that the compiler accepts both val c = new C[B]() new B(c) and val c = new C[A]() new B(c) but would reject val c = new C[B]() new A(c) It's probably possible to relax the typing of the ArrayBuffer in C to be A instead of T, and thus in the addEntry method as well, if that helps.

  Read the article

• How can I post an array of string to ASP.NET MVC Controller without a form?

  - by rodbv

  Hi there, I am creating a small app to teach myself ASP.NET MVC and JQuery, and one of the pages is a list of items in which some can be selected. Then I would like to press a button and send a List (or something equivalent) to my controller containing the ids of the items that were selected, using JQuery's Post function. I managed to get an array with the ids of the elements that were selected, and now I want to post that. One way I could do this is to have a dummy form in my page, with a hidden value, and then set the hidden value with the selected items, and post that form; this looks crufty, though. Is there a cleaner way to achieve this, by sending the array directly to the controller? I've tried a few different things but it looks like the controller can't map the data it's receiving. Here's the code so far: function generateList(selectedValues) { var s = { values: selectedValues //selectedValues is an array of string }; $.post("/Home/GenerateList", $.toJSON(s), function() { alert("back") }, "json"); } And then my Controller looks like this public ActionResult GenerateList(List<string> values) { //do something } All I managed to get is a "null" in the controller parameter... Any tips?

  Read the article

• Java constructor using generic types

  - by user37903

  I'm having a hard time wrapping my head around Java generic types. Here's a simple piece of code that in my mind should work, but I'm obviously doing something wrong. Eclipse reports this error in BreweryList.java: The method initBreweryFromObject() is undefined for the type <T> The idea is to fill a Vector with instances of objects that are a subclass of the Brewery class, so the invocation would be something like: BreweryList breweryList = new BreweryList(BrewerySubClass.class, list); BreweryList.java package com.beerme.test; import java.util.Vector; public class BreweryList<T extends Brewery> extends Vector<T> { public BreweryList(Class<T> c, Object[] j) { super(); for (int i = 0; i < j.length; i++) { T item = c.newInstance(); // initBreweryFromObject() is an instance method // of Brewery, of which <T> is a subclass (right?) c.initBreweryFromObject(); // "The method initBreweryFromObject() is undefined // for the type <T>" } } } Brewery.java package com.beerme.test; public class Brewery { public Brewery() { super(); } protected void breweryMethod() { } } BrewerySubClass.java package com.beerme.test; public class BrewerySubClass extends Brewery { public BrewerySubClass() { super(); } public void androidMethod() { } } I'm sure this is a complete-generics-noob question, but I'm stuck. Thanks for any tips!

  Read the article

• Reload mod_fcgid without killing Python Service

  - by Tobias

  Hi I'm currently running a Django project on my school's webserver with FCGI. I did follow the multiple guides that recommends installing a virtual local Python environment and it worked out great. The only issue i had was that "touching" my fcgi-file to reload source-files wasn't enough, but instead i had to kill the python service via SSH. This because mod_fcgid is used. However, the admin didn't think it was a great idea that i ran my own local python. He thought it better if i just told him what modules to install on root, which was a pretty nice service really. But doing this, i can no longer kill python since it's under root(though immoral as I am, I've definitely tried). The admins recommendation was that I should try too make the fcgi script reload itself by checking time stamp. I've tried to find documentation on how to do this, but fund very little and since I'm a absolute beginner i have no idea what would work. Anyone have experience running python/django under mod_fcgid or tips on where to find related guides/documentation?

  Read the article

• Debug.Assert-s use the same error message. Should I promote it to a static variable?

  - by Hamish Grubijan

  I love Asserts and code readability but not code duplication, and in several places I use a Debug.Assert which checks for the same condition like so: Debug.Assert(kosherBaconList.SelectedIndex != -1, "An error message along the lines - you should not ever be able to click on edit button without selecting a kosher bacon first."); This is in response to an actual bug, although the actual list does not contain kosher bacon. Anyhow, I can think of two approaches: private static readonly mustSelectKosherBaconBeforeEditAssertMessage = "An error message along the lines - you should not ever be able to " + "click on edit button without selecting a something first."; ... Debug.Assert( kosherBaconList.SelectedIndex != -1, mustSelectKosherBaconBeforeEditAssertMessage) or: if (kosherBaconList.SelectedIndex == -1) { AssertMustSelectKosherBaconBeforeEdit(); } ... [Conditional("DEBUG")] private void AssertMustSelectKosherBaconBeforeEdit() { // Compiler will optimize away this variable. string errorMessage = "An error message along the lines - you should not ever be able to " + "click on edit button without selecting a something first."; Debug.Assert(false, errorMessage); } or is there a third way which sucks less than either one above? Please share. General helpful relevant tips are also welcome.

  Read the article

• Creating UTF-8 files in Java from a runnable Jar

  - by RuntimeError

  I have a little Java project where I've set the properties of the class files to UTF-8 (I use a lot of foreign characters not found on the default CP1252). The goal is to create a text file (in Windows) containing a list of items. When running the class files from Eclipse itself (hitting Ctrl+F11) it creates the file flawlessly and opening it in another editor (I'm using Notepad++) I can see the characters as I wanted. +--------------------------------------------------+ ¦ Universidade2010 (18/18)¦ ¦ hidden: 0¦ +--------------------------------------------------¦ But, when I export the project (using Eclipse) as a runnable Jar and run it using 'javaw -jar project.jar' the new file created is a mess of question marks ???????????????????????????????????????????????????? ? Universidade2010 (19/19)? ? hidden: 0? ???????????????????????????????????????????????????? I've followed some tips on how to use UTF-8 (which seems to be broken by default on Java) to try to correct this so now I'm using Writer w = new OutputStreamWriter(fos, "UTF-8"); and writing the BOM header to the file like in this question already answered but still without luck when exporting to Jar Am I missing some property or command-line command so Java knows I want to create UTF-8 files by default ?

  Read the article

• What is the best way to wait for a GPS location fix?

  - by qtips

  Hi, Using my Android application, when a user does a certain action, a background service is started that fetches the current GPS location and saves it in a database in addition of doing some other stuff. In that service, I use the requestLocationUpdates() from the LocationManager class and wait until the onLocationChanged() of my LocationListener (which is implemented by the service) is fired. But what is the best way to wait for the onLocationChanged to fire? Should I simply poll on a variable and wait until it is set? Any tips? Note: I cannot simply write to the database in the onLocationChanged() because of some other stuff. EDIT: To clearfy my situation, I can present an example similar to my case: Let's say user pushes a button and a method myMethod is fired which will return some object. Then, in this myMethod I will register for location updates from the GPS (using requestLocationChanged) and in addition wait for the users location and use it for something. In other words, myMethod cannot return before the location is present. I don't know how I can use onLocationChanged in this case.

  Read the article

• Scalably processing large amount of comlpicated database data in PHP, many times a day.

  - by Eph

  I'm soon to be working on a project that poses a problem for me. It's going to require, at regular intervals throughout the day, processing tens of thousands of records, potentially over a million. Processing is going to involve several (potentially complicated) formulas and the generation of several random factors, writing some new data to a separate table, and updating the original records with some results. This needs to occur for all records, ideally, every three hours. Each new user to the site will be adding between 50 and 500 records that need to be processed in such a fashion, so the number will not be steady. The code hasn't been written, yet, as I'm still in the design process, mostly because of this issue. I know I'm going to need to use cron jobs, but I'm concerned that processing records of this size may cause the site to freeze up, perform slowly, or just piss off my hosting company every three hours. I'd like to know if anyone has any experience or tips on similar subjects? I've never worked at this magnitude before, and for all I know, this will be trivial to the server and not pose much of an issue. As long as ALL records are processed before the next three hour period occurs, I don't care if they aren't processed simultaneously (though, ideally, all records belonging to a specific user should be processed in the same batch), so I've been wondering if I should process in batches every 5 minutes, 15 minutes, hour, whatever works, and how best to approach this (and make it scalable in a way that is fair to all users)?

  Read the article

< Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >